April 2024 - Linux-kselftest-mirror

tools/testing/selftests/clone3/clone3_set_tid.c appears to always pass?

by Nathan Chancellor

Hi Christian, I am looking at tools/testing/selftests/clone3/clone3_set_tid.c as part of a patch to clean up the uses of 'return ksft_exit_...();' throughout the selftests (as they call exit() so they do not return) and I noticed that it seems to always pass even when there may have been an error? if (waitpid(ns_pid, &status, 0) < 0) { ksft_print_msg("Child returned %s\n", strerror(errno)); ret = -errno; goto out; } ... out: ret = 0; return !ret ? ksft_exit_pass() : ksft_exit_fail(); } Should the ret and out label positions be switched? Alternatively, it seems like ret and out do not have that many uses, perhaps it would just be better to call the ksft_exit_...() directly in their respective paths? I am not going to touch it as part of my patch but I felt it was worth reporting since it appears to have been there since the introduction of this test in commit 41585bbeeef9 ("selftests: add tests for clone3() with *set_tid"). Cheers, Nathan

1 year

2
1
0 0

selftests: mm: seal_elf.c:140:45: warning: format '%s' expects argument of type 'char *', but argument 5 has type 'char (*)[5]' [-Wformat=]

by Naresh Kamboju

The Linux next building selftests with gcc-13 found these build warnings and errors. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> Build log: --------- PATH: selftests/mm/seal_elf seal_elf.c: In function 'test_seal_elf': seal_elf.c:140:45: warning: format '%s' expects argument of type 'char *', but argument 5 has type 'char (*)[5]' [-Wformat=] 140 | if (sscanf(line, "%lx-%lx %4s %*x %*x:%*x %*u %255[^\n]", | ~~^ | | | char * 141 | &addr_start, &addr_end, &prot, &filename) == 4) { | ~~~~~ | | | char (*)[5] seal_elf.c:140:69: warning: format '%[^ ' expects argument of type 'char *', but argument 6 has type 'char (*)[256]' [-Wformat=] 140 | if (sscanf(line, "%lx-%lx %4s %*x %*x:%*x %*u %255[^\n]", | ~~~~~~^~ | | | char * 141 | &addr_start, &addr_end, &prot, &filename) == 4) { | ~~~~~~~~~ | | | char (*)[256] seal_elf.c:110:13: warning: unused variable 'size' [-Wunused-variable] 110 | int size = 0; | ^~~~ /usr/lib/gcc-cross/aarch64-linux-gnu/13/../../../../aarch64-linux-gnu/bin/ld: /tmp/cczODkiZ.o: in function `test_seal_elf': seal_elf.c:(.text+0x738): undefined reference to `sys_mprotect' /usr/lib/gcc-cross/aarch64-linux-gnu/13/../../../../aarch64-linux-gnu/bin/ld: seal_elf.c:(.text+0x794): undefined reference to `sys_mprotect' /usr/lib/gcc-cross/aarch64-linux-gnu/13/../../../../aarch64-linux-gnu/bin/ld: seal_elf.c:(.text+0x944): undefined reference to `sys_mprotect' collect2: error: ld returned 1 exit status Steps to reproduce: --- tuxmake --runtime podman --target-arch arm64 --toolchain gcc-13 \ --kconfig https://storage.tuxsuite.com/public/linaro/lkft/builds/2fDW3wG8BqWxf0afUI5f… \ debugkernel dtbs dtbs-legacy headers kernel kselftest modules Links: - https://storage.tuxsuite.com/public/linaro/lkft/builds/2fDW3wG8BqWxf0afUI5f… -- Linaro LKFT https://lkft.linaro.org

1 year

1
0
0 0

[PATCH net] selftests: kselftest_harness: fix Clang warning about zero-length format

by Jakub Kicinski

Apparently it's more legal to pass the format as NULL, than it is to use an empty string. Clang complains about empty formats: ./../kselftest_harness.h:1207:30: warning: format string is empty [-Wformat-zero-length] 1207 | diagnostic ? "%s" : "", diagnostic); | ^~ 1 warning generated. Reported-by: Sean Christopherson <seanjc(a)google.com> Link: https://lore.kernel.org/all/20240409224256.1581292-1-seanjc@google.com Fixes: 378193eff339 ("selftests: kselftest_harness: let PASS / FAIL provide diagnostic") Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- --- CC: shuah(a)kernel.org CC: keescook(a)chromium.org CC: usama.anjum(a)collabora.com CC: linux-kselftest(a)vger.kernel.org CC: llvm(a)lists.linux.dev --- tools/testing/selftests/kselftest.h | 10 ++++++---- tools/testing/selftests/kselftest_harness.h | 2 +- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/kselftest.h b/tools/testing/selftests/kselftest.h index 541bf192e30e..4eca3fd1292c 100644 --- a/tools/testing/selftests/kselftest.h +++ b/tools/testing/selftests/kselftest.h @@ -288,15 +288,17 @@ void ksft_test_result_code(int exit_code, const char *test_name, } /* Docs seem to call for double space if directive is absent */ - if (!directive[0] && msg[0]) + if (!directive[0] && msg) directive = " # "; - va_start(args, msg); printf("%s %u %s%s", tap_code, ksft_test_num(), test_name, directive); errno = saved_errno; - vprintf(msg, args); + if (msg) { + va_start(args, msg); + vprintf(msg, args); + va_end(args); + } printf("\n"); - va_end(args); } static inline int ksft_exit_pass(void) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index 4fd735e48ee7..adb15cae79ab 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -1202,7 +1202,7 @@ void __run_test(struct __fixture_metadata *f, diagnostic = "unknown"; ksft_test_result_code(t->exit_code, test_name, - diagnostic ? "%s" : "", diagnostic); + diagnostic ? "%s" : NULL, diagnostic); } static int test_harness_run(int argc, char **argv) -- 2.44.0

1 year

4
3
0 0

[PATCH net-next] selftests: openvswitch: Fix escape chars in regexp.

by Adrian Moreno

Character sequences starting with `\` are interpreted by python as escaped Unicode characters. However, they have other meaning in regular expressions (e.g: "\d"). It seems Python >= 3.12 starts emitting a SyntaxWarning when these escaped sequences are not recognized as valid Unicode characters. An example of these warnings: tools/testing/selftests/net/openvswitch/ovs-dpctl.py:505: SyntaxWarning: invalid escape sequence '\d' Fix all the warnings by flagging literals as raw strings. Signed-off-by: Adrian Moreno <amorenoz(a)redhat.com> --- .../selftests/net/openvswitch/ovs-dpctl.py | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py index 5e0e539a323d..1dd057afd3fb 100644 --- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py +++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py @@ -489,7 +489,7 @@ class ovsactions(nla): actstr, reason = parse_extract_field( actstr, "drop(", - "([0-9]+)", + r"([0-9]+)", lambda x: int(x, 0), False, None, @@ -502,9 +502,9 @@ class ovsactions(nla): actstr = actstr[len("drop"): ] return (totallen - len(actstr)) - elif parse_starts_block(actstr, "^(\d+)", False, True): + elif parse_starts_block(actstr, r"^(\d+)", False, True): actstr, output = parse_extract_field( - actstr, None, "(\d+)", lambda x: int(x), False, "0" + actstr, None, r"(\d+)", lambda x: int(x), False, "0" ) self["attrs"].append(["OVS_ACTION_ATTR_OUTPUT", output]) parsed = True @@ -512,7 +512,7 @@ class ovsactions(nla): actstr, recircid = parse_extract_field( actstr, "recirc(", - "([0-9a-fA-Fx]+)", + r"([0-9a-fA-Fx]+)", lambda x: int(x, 0), False, 0, @@ -588,17 +588,17 @@ class ovsactions(nla): actstr = actstr[3:] actstr, ip_block_min = parse_extract_field( - actstr, "=", "([0-9a-fA-F\.]+)", str, False + actstr, "=", r"([0-9a-fA-F\.]+)", str, False ) actstr, ip_block_max = parse_extract_field( - actstr, "-", "([0-9a-fA-F\.]+)", str, False + actstr, "-", r"([0-9a-fA-F\.]+)", str, False ) actstr, proto_min = parse_extract_field( - actstr, ":", "(\d+)", int, False + actstr, ":", r"(\d+)", int, False ) actstr, proto_max = parse_extract_field( - actstr, "-", "(\d+)", int, False + actstr, "-", r"(\d+)", int, False ) if t is not None: -- 2.44.0

1 year

3
2
0 0

[PATCH] selftests: adopt BPF's approach to quieter builds

by Jakub Kicinski

selftest build is fairly noisy, it's easy to miss warnings. It's standard practice to add alternative messages in the Makefile. I was grepping for existing solutions, and found that bpf already has the right knobs. Move them to lib.mk and adopt in net. Convert the basic rules in lib.mk. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- If this is okay with everyone, can we possibly apply it to net-next? CC: ast(a)kernel.org CC: daniel(a)iogearbox.net CC: andrii(a)kernel.org CC: martin.lau(a)linux.dev CC: eddyz87(a)gmail.com CC: song(a)kernel.org CC: yonghong.song(a)linux.dev CC: john.fastabend(a)gmail.com CC: kpsingh(a)kernel.org CC: sdf(a)google.com CC: haoluo(a)google.com CC: jolsa(a)kernel.org CC: mykolal(a)fb.com CC: shuah(a)kernel.org CC: nathan(a)kernel.org CC: ndesaulniers(a)google.com CC: morbo(a)google.com CC: justinstitt(a)google.com CC: bpf(a)vger.kernel.org CC: linux-kselftest(a)vger.kernel.org CC: llvm(a)lists.linux.dev --- tools/testing/selftests/bpf/Makefile | 13 +------------ tools/testing/selftests/lib.mk | 17 ++++++++++++++++- tools/testing/selftests/net/Makefile | 9 ++++++--- 3 files changed, 23 insertions(+), 16 deletions(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index b0be07f29dde..f06c527eee34 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -135,18 +135,7 @@ TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \ TEST_GEN_FILES += liburandom_read.so urandom_read sign-file uprobe_multi -# Emit succinct information message describing current building step -# $1 - generic step name (e.g., CC, LINK, etc); -# $2 - optional "flavor" specifier; if provided, will be emitted as [flavor]; -# $3 - target (assumed to be file); only file name will be emitted; -# $4 - optional extra arg, emitted as-is, if provided. -ifeq ($(V),1) -Q = -msg = -else -Q = @ -msg = @printf ' %-8s%s %s%s\n' "$(1)" "$(if $(2), [$(2)])" "$(notdir $(3))" "$(if $(4), $(4))"; -MAKEFLAGS += --no-print-directory +ifneq ($(V),1) submake_extras := feature_display=0 endif diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index da2cade3bab0..aeeac5f83492 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -44,6 +44,20 @@ endif selfdir = $(realpath $(dir $(filter %/lib.mk,$(MAKEFILE_LIST)))) top_srcdir = $(selfdir)/../../.. +# msg: emit succinct information message describing current building step +# $1 - generic step name (e.g., CC, LINK, etc); +# $2 - optional "flavor" specifier; if provided, will be emitted as [flavor]; +# $3 - target (assumed to be file); only file name will be emitted; +# $4 - optional extra arg, emitted as-is, if provided. +ifeq ($(V),1) +Q = +msg = +else +Q = @ +msg = @printf ' %-8s%s %s%s\n' "$(1)" "$(if $(2), [$(2)])" "$(notdir $(3))" "$(if $(4), $(4))"; +MAKEFLAGS += --no-print-directory +endif + ifeq ($(KHDR_INCLUDES),) KHDR_INCLUDES := -isystem $(top_srcdir)/usr/include endif @@ -176,7 +190,8 @@ endif ifeq ($(OVERRIDE_TARGETS),) LOCAL_HDRS += $(selfdir)/kselftest_harness.h $(selfdir)/kselftest.h $(OUTPUT)/%:%.c $(LOCAL_HDRS) - $(LINK.c) $(filter-out $(LOCAL_HDRS),$^) $(LDLIBS) -o $@ + $(call msg,CC,,$@) + $(Q)$(LINK.c) $(filter-out $(LOCAL_HDRS),$^) $(LDLIBS) -o $@ $(OUTPUT)/%.o:%.S $(COMPILE.S) $^ -o $@ diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index a3c781cb8367..7e7f243d0ab2 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -125,7 +125,8 @@ BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a MAKE_DIRS := $(BUILD_DIR)/libbpf $(MAKE_DIRS): - mkdir -p $@ + $(call msg,MKDIR,,$@) + $(Q)mkdir -p $@ # Get Clang's default includes on this system, as opposed to those seen by # '--target=bpf'. This fixes "missing" files on some architectures/distros, @@ -149,13 +150,15 @@ BPF_PROG_OBJS := $(OUTPUT)/nat6to4.o $(OUTPUT)/xdp_dummy.o \ $(OUTPUT)/sample_map_ret0.bpf.o $(OUTPUT)/sample_ret0.bpf.o $(BPF_PROG_OBJS): $(OUTPUT)/%.o : %.c $(BPFOBJ) | $(MAKE_DIRS) - $(CLANG) -O2 -g --target=bpf $(CCINCLUDE) $(CLANG_SYS_INCLUDES) \ + $(call msg,BPF_PROG,,$@) + $(Q)$(CLANG) -O2 -g --target=bpf $(CCINCLUDE) $(CLANG_SYS_INCLUDES) \ -c $< -o $@ $(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ $(APIDIR)/linux/bpf.h \ | $(BUILD_DIR)/libbpf - $(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \ + $(call msg,MAKE,,$@) + $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \ EXTRA_CFLAGS='-g -O0' \ DESTDIR=$(SCRATCH_DIR) prefix= all install_headers -- 2.44.0

1 year

3
2
0 0

[PATCH bpf-next v4 00/14] use network helpers, part 1

by Geliang Tang

From: Geliang Tang <tanggeliang(a)kylinos.cn> v4: - add more patches using make_sockaddr and get_socket_local_port helpers. v3: - address comments of Martin and Eduard in v2. (thanks) - move "int type" to the first argument of start_server_addr and connect_to_addr. - add start_server_addr_opts. - using "sockaddr_storage" instead of "sockaddr". - move start_server_setsockopt patches out of this series. v2: - update patch 6 only, fix errors reported by CI. This patchset uses public helpers start_server_* and connect_to_* defined in network_helpers.c to drop duplicate code. Geliang Tang (14): selftests/bpf: Update arguments of connect_to_addr selftests/bpf: Add start_server_addr* helpers selftests/bpf: Use start_server_addr in cls_redirect selftests/bpf: Use connect_to_addr in cls_redirect selftests/bpf: Use start_server_addr in sk_assign selftests/bpf: Use connect_to_addr in sk_assign selftests/bpf: Use get_socket_local_port in sk_assign selftests/bpf: Use make_sockaddr in sk_assign selftests/bpf: Use log_err in network_helpers selftests/bpf: Use start_server_addr in test_sock_addr selftests/bpf: Use connect_to_addr in test_sock_addr selftests/bpf: Use make_sockaddr in test_sock_addr selftests/bpf: Use make_sockaddr in test_sock selftests/bpf: Use make_sockaddr in ip_check_defrag tools/testing/selftests/bpf/Makefile | 4 +- tools/testing/selftests/bpf/network_helpers.c | 37 ++++- tools/testing/selftests/bpf/network_helpers.h | 6 +- .../selftests/bpf/prog_tests/cls_redirect.c | 38 +---- .../selftests/bpf/prog_tests/empty_skb.c | 2 + .../bpf/prog_tests/ip_check_defrag.c | 20 +-- .../selftests/bpf/prog_tests/sk_assign.c | 92 ++---------- .../selftests/bpf/prog_tests/sock_addr.c | 6 +- .../selftests/bpf/prog_tests/tc_redirect.c | 2 +- .../selftests/bpf/prog_tests/test_tunnel.c | 4 + .../selftests/bpf/prog_tests/xdp_metadata.c | 16 +++ tools/testing/selftests/bpf/test_sock.c | 28 +--- tools/testing/selftests/bpf/test_sock_addr.c | 136 +++--------------- 13 files changed, 104 insertions(+), 287 deletions(-) -- 2.40.1

1 year

2
17
0 0

[PATCH v2 00/17] riscv: Support vendor extensions and xtheadvector

by Charlie Jenkins

This patch series ended up much larger than expected, please bear with me! The goal here is to support vendor extensions, starting at probing the device tree and ending with reporting to userspace. The main design objective was to allow vendors to operate independently of each other. This has been achieved by delegating vendor extensions to a new struct "hart_isa_vendor" which is a counterpart to "hart_isa". Each vendor will have their own list of extensions they support. Each vendor will have a "namespace" to themselves which is set at the key values of 0x8000 - 0x8080. It is up to the vendor's disgression how they wish to allocate keys in the range for their vendor extensions. Reporting to userspace follows a similar story, leveraging the hwprobe syscall. There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_0 that is used to request supported vendor extensions. The vendor extension keys are disambiguated by the vendor associated with the cpumask passed into hwprobe. The entire 64-bit key space is available to each vendor. On to the xtheadvector specific code. xtheadvector is a custom extension that is based upon riscv vector version 0.7.1 [1]. All of the vector routines have been modified to support this alternative vector version based upon whether xtheadvector was determined to be supported at boot. I have tested this with an Allwinner Nezha board. I ran into issues booting the board on 6.9-rc1 so I applied these patches to 6.8. There are a couple of minor merge conflicts that do arrise when doing that, so please let me know if you have been able to boot this board with a 6.9 kernel. I used SkiffOS [2] to manage building the image, but upgraded the U-Boot version to Samuel Holland's more up-to-date version [3] and changed out the device tree used by U-Boot with the device trees that are present in upstream linux and this series. Thank you Samuel for all of the work you did to make this task possible. To test the integration, I used the riscv vector kselftests. I modified the test cases to be able to more easily extend them, and then added a xtheadvector target that works by calling hwprobe and swapping out the vector asm if needed. [1] https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361… [2] https://github.com/skiffos/SkiffOS/tree/master/configs/allwinner/nezha [3] https://github.com/smaeul/u-boot/commit/2e89b706f5c956a70c989cd31665f1429e9… Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> --- Changes in v2: - Added commit hash to xtheadvector - Simplified riscv,isa vector removal fix to not mess with the DT riscv,vendorid - Moved riscv,vendorid parsing into a different patch and cache the value to be used by alternative patching - Reduce riscv,vendorid missing severity to "info" - Separate vendor extension list to vendor files - xtheadvector no longer puts v in the elf_hwcap - Only patch vendor extension if all harts are associated with the same vendor. This is the best chance the kernel has for working properly if there are multiple vendors. - Split hwprobe vendor keys out into vendor file - Add attribution for Heiko's patches - Link to v1: https://lore.kernel.org/r/20240411-dev-charlie-support_thead_vector_6_9-v1-… --- Charlie Jenkins (16): riscv: cpufeature: Fix thead vector hwcap removal dt-bindings: riscv: Add xtheadvector ISA extension description dt-bindings: riscv: Add vendorid riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree riscv: Fix extension subset checking riscv: Extend cpufeature.c to detect vendor extensions riscv: Introduce vendor variants of extension helpers riscv: drivers: Convert xandespmu to use the vendor extension framework riscv: uaccess: Add alternative for xtheadvector uaccess riscv: csr: Add CSR encodings for VCSR_VXRM/VCSR_VXSAT riscv: Create xtheadvector file riscv: vector: Support xtheadvector save/restore riscv: hwprobe: Add vendor extension probing riscv: hwprobe: Document vendor extensions and xtheadvector extension selftests: riscv: Fix vector tests selftests: riscv: Support xtheadvector in vector tests Heiko Stuebner (1): RISC-V: define the elements of the VCSR vector CSR Documentation/arch/riscv/hwprobe.rst | 12 + Documentation/devicetree/bindings/riscv/cpus.yaml | 5 + .../devicetree/bindings/riscv/extensions.yaml | 10 + arch/riscv/Kconfig | 2 + arch/riscv/Kconfig.vendor | 11 + arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 3 +- arch/riscv/errata/sifive/errata.c | 2 + arch/riscv/errata/thead/errata.c | 2 + arch/riscv/include/asm/cpufeature.h | 170 +++++++++--- arch/riscv/include/asm/csr.h | 13 + arch/riscv/include/asm/hwcap.h | 27 +- arch/riscv/include/asm/hwprobe.h | 7 +- arch/riscv/include/asm/sbi.h | 2 + arch/riscv/include/asm/switch_to.h | 2 +- arch/riscv/include/asm/vector.h | 246 +++++++++++++---- arch/riscv/include/asm/vendor_extensions.h | 18 ++ arch/riscv/include/asm/xtheadvector.h | 25 ++ arch/riscv/include/uapi/asm/hwprobe.h | 11 +- arch/riscv/include/uapi/asm/vendor/thead.h | 3 + arch/riscv/kernel/Makefile | 2 + arch/riscv/kernel/cpu.c | 36 ++- arch/riscv/kernel/cpufeature.c | 204 ++++++++++---- arch/riscv/kernel/kernel_mode_vector.c | 8 +- arch/riscv/kernel/process.c | 4 +- arch/riscv/kernel/signal.c | 6 +- arch/riscv/kernel/sys_hwprobe.c | 54 +++- arch/riscv/kernel/vector.c | 35 ++- arch/riscv/kernel/vendor_extensions.c | 36 +++ arch/riscv/kernel/vendor_extensions/Makefile | 4 + .../kernel/vendor_extensions/andes_extensions.c | 13 + .../kernel/vendor_extensions/thead_extensions.c | 13 + arch/riscv/lib/uaccess.S | 2 + drivers/perf/riscv_pmu_sbi.c | 7 +- tools/testing/selftests/riscv/vector/.gitignore | 3 +- tools/testing/selftests/riscv/vector/Makefile | 17 +- .../selftests/riscv/vector/v_exec_initval_nolibc.c | 93 +++++++ tools/testing/selftests/riscv/vector/v_helpers.c | 74 ++++++ tools/testing/selftests/riscv/vector/v_helpers.h | 7 + tools/testing/selftests/riscv/vector/v_initval.c | 22 ++ .../selftests/riscv/vector/v_initval_nolibc.c | 68 ----- .../selftests/riscv/vector/vstate_exec_nolibc.c | 20 +- .../testing/selftests/riscv/vector/vstate_prctl.c | 295 ++++++++++++--------- 42 files changed, 1226 insertions(+), 368 deletions(-) --- base-commit: 4cece764965020c22cff7665b18a012006359095 change-id: 20240411-dev-charlie-support_thead_vector_6_9-1591fc2a431d -- - Charlie

1 year

2
31
0 0

[PATCH net 0/4] selftests/net/tcp_ao: A bunch of fixes for TCP-AO selftests

by Dmitry Safonov via B4 Relay

Started as addressing the flakiness issues in rst_ipv*, that affect netdev dashboard. Signed-off-by: Dmitry Safonov <0x7f454c46(a)gmail.com> --- Dmitry Safonov (4): selftests/tcp_ao: Make RST tests less flaky selftests/tcp_ao: Zero-init tcp_ao_info_opt selftests/tcp_ao: Fix fscanf() call for format-security selftests/tcp_ao: Printing fixes to confirm with format-security tools/testing/selftests/net/tcp_ao/lib/proc.c | 2 +- tools/testing/selftests/net/tcp_ao/lib/setup.c | 12 +++++------ tools/testing/selftests/net/tcp_ao/rst.c | 23 ++++++++++++---------- .../selftests/net/tcp_ao/setsockopt-closed.c | 2 +- 4 files changed, 21 insertions(+), 18 deletions(-) --- base-commit: 8f2c057754b25075aa3da132cd4fd4478cdab854 change-id: 20240413-tcp-ao-selftests-fixes-adacd65cb8ba Best regards, -- Dmitry Safonov <0x7f454c46(a)gmail.com>

1 year

4
12
0 0

[PATCH 00/19] riscv: Support vendor extensions and xtheadvector

by Charlie Jenkins

This patch series ended up much larger than expected, please bear with me! The goal here is to support vendor extensions, starting at probing the device tree and ending with reporting to userspace. The main design objective was to allow vendors to operate independently of each other. This has been achieved by delegating vendor extensions to a new struct "hart_isa_vendor" which is a counterpart to "hart_isa". Each vendor will have their own list of extensions they support. Each vendor will have a "namespace" to themselves which is set at the key values of 0x8000 - 0x8080. It is up to the vendor's disgression how they wish to allocate keys in the range for their vendor extensions. Reporting to userspace follows a similar story, leveraging the hwprobe syscall. There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_0 that is used to request supported vendor extensions. The vendor extension keys are disambiguated by the vendor associated with the cpumask passed into hwprobe. The entire 64-bit key space is available to each vendor. On to the xtheadvector specific code. xtheadvector is a custom extension that is based upon riscv vector version 0.7.1 [1]. All of the vector routines have been modified to support this alternative vector version based upon whether xtheadvector was determined to be supported at boot. I have tested this with an Allwinner Nezha board. I ran into issues booting the board on 6.9-rc1 so I applied these patches to 6.8. There are a couple of minor merge conflicts that do arrise when doing that, so please let me know if you have been able to boot this board with a 6.9 kernel. I used SkiffOS [2] to manage building the image, but upgraded the U-Boot version to Samuel Holland's more up-to-date version [3] and changed out the device tree used by U-Boot with the device trees that are present in upstream linux and this series. Thank you Samuel for all of the work you did to make this task possible. To test the integration, I used the riscv vector kselftests. I modified the test cases to be able to more easily extend them, and then added a xtheadvector target that works by calling hwprobe and swapping out the vector asm if needed. [1] https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361… [2] https://github.com/skiffos/SkiffOS/tree/master/configs/allwinner/nezha [3] https://github.com/smaeul/u-boot/commit/2e89b706f5c956a70c989cd31665f1429e9… Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> --- Charlie Jenkins (18): dt-bindings: riscv: Add vendorid and archid riscv: cpufeature: Fix thead vector hwcap removal dt-bindings: riscv: Add xtheadvector ISA extension description riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree riscv: Fix extension subset checking riscv: Extend cpufeature.c to detect vendor extensions riscv: Optimize riscv_cpu_isa_extension_(un)likely() riscv: Introduce vendor variants of extension helpers riscv: uaccess: Add alternative for xtheadvector uaccess riscv: csr: Add CSR encodings for VCSR_VXRM/VCSR_VXSAT riscv: Create xtheadvector file riscv: vector: Support xtheadvector save/restore riscv: hwprobe: Disambiguate vector and xtheadvector in hwprobe riscv: hwcap: Add v to hwcap if xtheadvector enabled riscv: hwprobe: Add vendor extension probing riscv: hwprobe: Document vendor extensions and xtheadvector extension selftests: riscv: Fix vector tests selftests: riscv: Support xtheadvector in vector tests Heiko Stuebner (1): RISC-V: define the elements of the VCSR vector CSR Documentation/arch/riscv/hwprobe.rst | 12 + Documentation/devicetree/bindings/riscv/cpus.yaml | 11 + .../devicetree/bindings/riscv/extensions.yaml | 9 + arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 4 +- arch/riscv/include/asm/cpufeature.h | 143 +++++++--- arch/riscv/include/asm/csr.h | 13 + arch/riscv/include/asm/hwcap.h | 23 ++ arch/riscv/include/asm/hwprobe.h | 4 +- arch/riscv/include/asm/sbi.h | 2 + arch/riscv/include/asm/vector.h | 228 ++++++++++++---- arch/riscv/include/asm/xtheadvector.h | 25 ++ arch/riscv/include/uapi/asm/hwprobe.h | 10 +- arch/riscv/kernel/cpu.c | 20 ++ arch/riscv/kernel/cpufeature.c | 264 +++++++++++++++--- arch/riscv/kernel/kernel_mode_vector.c | 4 +- arch/riscv/kernel/sys_hwprobe.c | 59 ++++- arch/riscv/kernel/vector.c | 22 +- arch/riscv/lib/uaccess.S | 1 + tools/testing/selftests/riscv/vector/.gitignore | 3 +- tools/testing/selftests/riscv/vector/Makefile | 17 +- .../selftests/riscv/vector/v_exec_initval_nolibc.c | 93 +++++++ tools/testing/selftests/riscv/vector/v_helpers.c | 66 +++++ tools/testing/selftests/riscv/vector/v_helpers.h | 7 + tools/testing/selftests/riscv/vector/v_initval.c | 22 ++ .../selftests/riscv/vector/v_initval_nolibc.c | 68 ----- .../selftests/riscv/vector/vstate_exec_nolibc.c | 20 +- .../testing/selftests/riscv/vector/vstate_prctl.c | 295 ++++++++++++--------- 27 files changed, 1114 insertions(+), 331 deletions(-) --- base-commit: 4cece764965020c22cff7665b18a012006359095 change-id: 20240411-dev-charlie-support_thead_vector_6_9-1591fc2a431d -- - Charlie

1 year

5
77
0 0

[PATCH 00/10] Add support for a few Zc* extensions as well as Zcmop

by Clément Léger

Add support for (yet again) more RVA23U64 missing extensions. Add support for Zcmop, Zca, Zcf, Zcd and Zcb extensions isa string parsing, hwprobe and kvm support. Zce, Zcmt and Zcmp extensions have been left out since they target microcontrollers/embedded CPUs and are not needed by RVA23U64 This series is based on the Zimop one [1]. Link: https://lore.kernel.org/linux-riscv/20240404103254.1752834-1-cleger@rivosin… [1] Clément Léger (10): dt-bindings: riscv: add Zca, Zcf, Zcd and Zcb ISA extension description riscv: add ISA parsing for Zca, Zcf, Zcd and Zcb riscv: hwprobe: export Zca, Zcf, Zcd and Zcb ISA extensions RISC-V: KVM: Allow Zca, Zcf, Zcd and Zcb extensions for Guest/VM KVM: riscv: selftests: Add some Zc* extensions to get-reg-list test dt-bindings: riscv: add Zcmop ISA extension description riscv: add ISA extension parsing for Zcmop riscv: hwprobe: export Zcmop ISA extension RISC-V: KVM: Allow Zcmop extension for Guest/VM KVM: riscv: selftests: Add Zcmop extension to get-reg-list test Documentation/arch/riscv/hwprobe.rst | 24 ++++++++++++ .../devicetree/bindings/riscv/extensions.yaml | 37 +++++++++++++++++++ arch/riscv/include/asm/hwcap.h | 5 +++ arch/riscv/include/uapi/asm/hwprobe.h | 5 +++ arch/riscv/include/uapi/asm/kvm.h | 5 +++ arch/riscv/kernel/cpufeature.c | 5 +++ arch/riscv/kernel/sys_hwprobe.c | 5 +++ arch/riscv/kvm/vcpu_onereg.c | 10 +++++ .../selftests/kvm/riscv/get-reg-list.c | 20 ++++++++++ 9 files changed, 116 insertions(+) -- 2.43.0

1 year

4
23
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror April 2024