April 2024 - Linux-kselftest-mirror

[PATCH v5 00/22] RISC-V SBI v2.0 PMU improvements and Perf sampling in KVM guest

by Atish Patra

This series implements SBI PMU improvements done in SBI v2.0[1] i.e. PMU snapshot and fw_read_hi() functions. SBI v2.0 introduced PMU snapshot feature which allows the SBI implementation to provide counter information (i.e. values/overflow status) via a shared memory between the SBI implementation and supervisor OS. This allows to minimize the number of traps in when perf being used inside a kvm guest as it relies on SBI PMU + trap/emulation of the counters. The current set of ratified RISC-V specification also doesn't allow scountovf to be trap/emulated by the hypervisor. The SBI PMU snapshot bridges the gap in ISA as well and enables perf sampling in the guest. However, LCOFI in the guest only works via IRQ filtering in AIA specification. That's why, AIA has to be enabled in the hardware (at least the Ssaia extension) in order to use the sampling support in the perf. Here are the patch wise implementation details. PATCH 1,4,7,8,9,10,11,15 : Generic cleanups/improvements. PATCH 2,3,14 : FW_READ_HI function implementation PATCH 5-6: Add PMU snapshot feature in sbi pmu driver PATCH 12-13: KVM implementation for snapshot and sampling in kvm guests PATCH 16-17: Generic improvements for kvm selftests PATCH 18-22: KVM selftests for SBI PMU extension The series is based on v6.9-rc1 and is available at: https://github.com/atishp04/linux/tree/kvm_pmu_snapshot_v5 The kvmtool patch is also available at: https://github.com/atishp04/kvmtool/tree/sscofpmf It also requires Ssaia ISA extension to be present in the hardware in order to get perf sampling support in the guest. In Qemu virt machine, it can be done by the following config. ``` -cpu rv64,sscofpmf=true,x-ssaia=true ``` There is no other dependencies on AIA apart from that. Thus, Ssaia must be disabled for the guest if AIA patches are not available. Here is the example command. ``` ./lkvm-static run -m 256 -c2 --console serial -p "console=ttyS0 earlycon" --disable-ssaia -k ./Image --debug ``` The series has been tested only in Qemu. Here is the snippet of the perf running inside a kvm guest. =================================================== $ perf record -e cycles -e instructions perf bench sched messaging -g 5 ... $ Running 'sched/messaging' benchmark: ... [ 45.928723] perf_duration_warn: 2 callbacks suppressed [ 45.929000] perf: interrupt took too long (484426 > 483186), lowering kernel.perf_event_max_sample_rate to 250 $ 20 sender and receiver processes per group $ 5 groups == 200 processes run Total time: 14.220 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.117 MB perf.data (1942 samples) ] $ perf report --stdio $ To display the perf.data header info, please use --header/--header-only optio> $ $ $ Total Lost Samples: 0 $ $ Samples: 943 of event 'cycles' $ Event count (approx.): 5128976844 $ $ Overhead Command Shared Object Symbol > $ ........ ............... ........................... .....................> $ 7.59% sched-messaging [kernel.kallsyms] [k] memcpy 5.48% sched-messaging [kernel.kallsyms] [k] percpu_counter_ad> 5.24% sched-messaging [kernel.kallsyms] [k] __sbi_rfence_v02_> 4.00% sched-messaging [kernel.kallsyms] [k] _raw_spin_unlock_> 3.79% sched-messaging [kernel.kallsyms] [k] set_pte_range 3.72% sched-messaging [kernel.kallsyms] [k] next_uptodate_fol> 3.46% sched-messaging [kernel.kallsyms] [k] filemap_map_pages 3.31% sched-messaging [kernel.kallsyms] [k] handle_mm_fault 3.20% sched-messaging [kernel.kallsyms] [k] finish_task_switc> 3.16% sched-messaging [kernel.kallsyms] [k] clear_page 3.03% sched-messaging [kernel.kallsyms] [k] mtree_range_walk 2.42% sched-messaging [kernel.kallsyms] [k] flush_icache_pte =================================================== [1] https://github.com/riscv-non-isa/riscv-sbi-doc Changes from v4->v5: 1. Moved sbi related definitions to its own header file from processor.h 2. Added few helper functions for selftests. 3. Improved firmware counter read and RV32 start/stop functions. 4. Converted all the shifting operations to use BIT macro 5. Addressed all other comments on v4. Changes from v3->v4: 1. Added selftests. 2. Fixed an issue to clear the interrupt pending bits. 3. Fixed the counter index in snapshot memory start function. Changes from v2->v3: 1. Fixed a patchwork warning on patch6. 2. Fixed a comment formatting & nit fix in PATCH 3 & 5. 3. Moved the hvien update and sscofpmf enabling to PATCH 9 from PATCH 8. Changes from v1->v2: 1. Fixed warning/errors from patchwork CI. 2. Rebased on top of kvm-next. 3. Added Acked-by tags. Changes from RFC->v1: 1. Addressed all the comments on RFC series. 2. Removed PATCH2 and merged into later patches. 3. Added 2 more patches for minor fixes. 4. Fixed KVM boot issue without Ssaia and made sscofpmf in guest dependent on Ssaia in the host. Atish Patra (22): RISC-V: Fix the typo in Scountovf CSR name RISC-V: Add FIRMWARE_READ_HI definition drivers/perf: riscv: Read upper bits of a firmware counter drivers/perf: riscv: Use BIT macro for shifting operations RISC-V: Add SBI PMU snapshot definitions drivers/perf: riscv: Implement SBI PMU snapshot function drivers/perf: riscv: Fix counter mask iteration for RV32 RISC-V: KVM: Fix the initial sample period value RISC-V: KVM: Rename the SBI_STA_SHMEM_DISABLE to a generic name RISC-V: KVM: No need to update the counter value during reset RISC-V: KVM: No need to exit to the user space if perf event failed RISC-V: KVM: Implement SBI PMU Snapshot feature RISC-V: KVM: Add perf sampling support for guests RISC-V: KVM: Support 64 bit firmware counters on RV32 RISC-V: KVM: Improve firmware counter read function KVM: riscv: selftests: Move sbi definitions to its own header file KVM: riscv: selftests: Add helper functions for extension checks KVM: riscv: selftests: Add Sscofpmf to get-reg-list test KVM: riscv: selftests: Add SBI PMU extension definitions KVM: riscv: selftests: Add SBI PMU selftest KVM: riscv: selftests: Add a test for PMU snapshot functionality KVM: riscv: selftests: Add a test for counter overflow arch/riscv/include/asm/csr.h | 5 +- arch/riscv/include/asm/kvm_vcpu_pmu.h | 16 +- arch/riscv/include/asm/sbi.h | 34 +- arch/riscv/include/uapi/asm/kvm.h | 1 + arch/riscv/kernel/paravirt.c | 6 +- arch/riscv/kvm/aia.c | 5 + arch/riscv/kvm/vcpu.c | 15 +- arch/riscv/kvm/vcpu_onereg.c | 5 + arch/riscv/kvm/vcpu_pmu.c | 260 +++++++- arch/riscv/kvm/vcpu_sbi_pmu.c | 17 +- arch/riscv/kvm/vcpu_sbi_sta.c | 4 +- drivers/perf/riscv_pmu.c | 1 + drivers/perf/riscv_pmu_sbi.c | 264 +++++++- include/linux/perf/riscv_pmu.h | 6 + tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/include/riscv/processor.h | 49 +- .../testing/selftests/kvm/include/riscv/sbi.h | 141 +++++ .../selftests/kvm/include/riscv/ucall.h | 1 + .../selftests/kvm/lib/riscv/processor.c | 12 + .../testing/selftests/kvm/riscv/arch_timer.c | 2 +- .../selftests/kvm/riscv/get-reg-list.c | 4 + .../selftests/kvm/riscv/sbi_pmu_test.c | 581 ++++++++++++++++++ tools/testing/selftests/kvm/steal_time.c | 4 +- 23 files changed, 1322 insertions(+), 112 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/riscv/sbi.h create mode 100644 tools/testing/selftests/kvm/riscv/sbi_pmu_test.c -- 2.34.1

8 months, 2 weeks

3
57
0 0

[PATCH v4 00/15] RISC-V SBI v2.0 PMU improvements and Perf sampling in KVM guest

by Atish Patra

This series implements SBI PMU improvements done in SBI v2.0[1] i.e. PMU snapshot and fw_read_hi() functions. SBI v2.0 introduced PMU snapshot feature which allows the SBI implementation to provide counter information (i.e. values/overflow status) via a shared memory between the SBI implementation and supervisor OS. This allows to minimize the number of traps in when perf being used inside a kvm guest as it relies on SBI PMU + trap/emulation of the counters. The current set of ratified RISC-V specification also doesn't allow scountovf to be trap/emulated by the hypervisor. The SBI PMU snapshot bridges the gap in ISA as well and enables perf sampling in the guest. However, LCOFI in the guest only works via IRQ filtering in AIA specification. That's why, AIA has to be enabled in the hardware (at least the Ssaia extension) in order to use the sampling support in the perf. Here are the patch wise implementation details. PATCH 1,6,7 : Generic cleanups/improvements. PATCH 2,3,10 : FW_READ_HI function implementation PATCH 4-5: Add PMU snapshot feature in sbi pmu driver PATCH 6-7: KVM implementation for snapshot and sampling in kvm guests PATCH 11-15: KVM selftests for SBI PMU extension The series is based on kvm-next and is available at: https://github.com/atishp04/linux/tree/kvm_pmu_snapshot_v4 The series is based on kvm-riscv/queue branch + fixes suggested on the following series https://patchwork.kernel.org/project/kvm/cover/cover.1705916069.git.haibo1.… The kvmtool patch is also available at: https://github.com/atishp04/kvmtool/tree/sscofpmf It also requires Ssaia ISA extension to be present in the hardware in order to get perf sampling support in the guest. In Qemu virt machine, it can be done by the following config. ``` -cpu rv64,sscofpmf=true,x-ssaia=true ``` There is no other dependencies on AIA apart from that. Thus, Ssaia must be disabled for the guest if AIA patches are not available. Here is the example command. ``` ./lkvm-static run -m 256 -c2 --console serial -p "console=ttyS0 earlycon" --disable-ssaia -k ./Image --debug ``` The series has been tested only in Qemu. Here is the snippet of the perf running inside a kvm guest. =================================================== $ perf record -e cycles -e instructions perf bench sched messaging -g 5 ... $ Running 'sched/messaging' benchmark: ... [ 45.928723] perf_duration_warn: 2 callbacks suppressed [ 45.929000] perf: interrupt took too long (484426 > 483186), lowering kernel.perf_event_max_sample_rate to 250 $ 20 sender and receiver processes per group $ 5 groups == 200 processes run Total time: 14.220 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.117 MB perf.data (1942 samples) ] $ perf report --stdio $ To display the perf.data header info, please use --header/--header-only optio> $ $ $ Total Lost Samples: 0 $ $ Samples: 943 of event 'cycles' $ Event count (approx.): 5128976844 $ $ Overhead Command Shared Object Symbol > $ ........ ............... ........................... .....................> $ 7.59% sched-messaging [kernel.kallsyms] [k] memcpy 5.48% sched-messaging [kernel.kallsyms] [k] percpu_counter_ad> 5.24% sched-messaging [kernel.kallsyms] [k] __sbi_rfence_v02_> 4.00% sched-messaging [kernel.kallsyms] [k] _raw_spin_unlock_> 3.79% sched-messaging [kernel.kallsyms] [k] set_pte_range 3.72% sched-messaging [kernel.kallsyms] [k] next_uptodate_fol> 3.46% sched-messaging [kernel.kallsyms] [k] filemap_map_pages 3.31% sched-messaging [kernel.kallsyms] [k] handle_mm_fault 3.20% sched-messaging [kernel.kallsyms] [k] finish_task_switc> 3.16% sched-messaging [kernel.kallsyms] [k] clear_page 3.03% sched-messaging [kernel.kallsyms] [k] mtree_range_walk 2.42% sched-messaging [kernel.kallsyms] [k] flush_icache_pte =================================================== [1] https://github.com/riscv-non-isa/riscv-sbi-doc Changes from v3->v4: 1. Added selftests. 2. Fixed an issue to clear the interrupt pending bits. 3. Fixed the counter index in snapshot memory start function. Changes from v2->v3: 1. Fixed a patchwork warning on patch6. 2. Fixed a comment formatting & nit fix in PATCH 3 & 5. 3. Moved the hvien update and sscofpmf enabling to PATCH 9 from PATCH 8. Changes from v1->v2: 1. Fixed warning/errors from patchwork CI. 2. Rebased on top of kvm-next. 3. Added Acked-by tags. Changes from RFC->v1: 1. Addressed all the comments on RFC series. 2. Removed PATCH2 and merged into later patches. 3. Added 2 more patches for minor fixes. 4. Fixed KVM boot issue without Ssaia and made sscofpmf in guest dependent on Ssaia in the host. Atish Patra (15): RISC-V: Fix the typo in Scountovf CSR name RISC-V: Add FIRMWARE_READ_HI definition drivers/perf: riscv: Read upper bits of a firmware counter RISC-V: Add SBI PMU snapshot definitions drivers/perf: riscv: Implement SBI PMU snapshot function RISC-V: KVM: No need to update the counter value during reset RISC-V: KVM: No need to exit to the user space if perf event failed RISC-V: KVM: Implement SBI PMU Snapshot feature RISC-V: KVM: Add perf sampling support for guests RISC-V: KVM: Support 64 bit firmware counters on RV32 KVM: riscv: selftests: Add Sscofpmf to get-reg-list test KVM: riscv: selftests: Add SBI PMU extension definitions KVM: riscv: selftests: Add SBI PMU selftest KVM: riscv: selftests: Add a test for PMU snapshot functionality KVM: riscv: selftests: Add a test for counter overflow arch/riscv/include/asm/csr.h | 5 +- arch/riscv/include/asm/errata_list.h | 2 +- arch/riscv/include/asm/kvm_vcpu_pmu.h | 14 +- arch/riscv/include/asm/sbi.h | 12 + arch/riscv/include/uapi/asm/kvm.h | 1 + arch/riscv/kvm/aia.c | 5 + arch/riscv/kvm/vcpu.c | 14 +- arch/riscv/kvm/vcpu_onereg.c | 9 +- arch/riscv/kvm/vcpu_pmu.c | 247 +++++++- arch/riscv/kvm/vcpu_sbi_pmu.c | 15 +- drivers/perf/riscv_pmu.c | 1 + drivers/perf/riscv_pmu_sbi.c | 229 ++++++- include/linux/perf/riscv_pmu.h | 6 + tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/include/riscv/processor.h | 92 +++ .../selftests/kvm/lib/riscv/processor.c | 12 + .../selftests/kvm/riscv/get-reg-list.c | 4 + tools/testing/selftests/kvm/riscv/sbi_pmu.c | 588 ++++++++++++++++++ 18 files changed, 1212 insertions(+), 45 deletions(-) create mode 100644 tools/testing/selftests/kvm/riscv/sbi_pmu.c -- 2.34.1

8 months, 2 weeks

7
55
0 0

[PATCH v14 8/8] selftests/udmabuf: Add tests to verify data after page migration

by Vivek Kasireddy

Since the memfd pages associated with a udmabuf may be migrated as part of udmabuf create, we need to verify the data coherency after successful migration. The new tests added in this patch try to do just that using 4k sized pages and also 2 MB sized huge pages for the memfd. Successful completion of the tests would mean that there is no disconnect between the memfd pages and the ones associated with a udmabuf. And, these tests can also be augmented in the future to test newer udmabuf features (such as handling memfd hole punch). The idea for these tests comes from a patch by Mike Kravetz here: https://lists.freedesktop.org/archives/dri-devel/2023-June/410623.html v1->v2: (suggestions from Shuah) - Use ksft_* functions to print and capture results of tests - Use appropriate KSFT_* status codes for exit() - Add Mike Kravetz's suggested-by tag Cc: Shuah Khan <shuah(a)kernel.org> Cc: David Hildenbrand <david(a)redhat.com> Cc: Daniel Vetter <daniel.vetter(a)ffwll.ch> Cc: Hugh Dickins <hughd(a)google.com> Cc: Peter Xu <peterx(a)redhat.com> Cc: Jason Gunthorpe <jgg(a)nvidia.com> Cc: Gerd Hoffmann <kraxel(a)redhat.com> Cc: Dongwon Kim <dongwon.kim(a)intel.com> Cc: Junxiao Chang <junxiao.chang(a)intel.com> Cc: linux-kselftest(a)vger.kernel.org Suggested-by: Mike Kravetz <mike.kravetz(a)oracle.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy(a)intel.com> --- .../selftests/drivers/dma-buf/udmabuf.c | 214 +++++++++++++++--- 1 file changed, 183 insertions(+), 31 deletions(-) diff --git a/tools/testing/selftests/drivers/dma-buf/udmabuf.c b/tools/testing/selftests/drivers/dma-buf/udmabuf.c index c812080e304e..6062723a172e 100644 --- a/tools/testing/selftests/drivers/dma-buf/udmabuf.c +++ b/tools/testing/selftests/drivers/dma-buf/udmabuf.c @@ -9,52 +9,162 @@ #include <errno.h> #include <fcntl.h> #include <malloc.h> +#include <stdbool.h> #include <sys/ioctl.h> #include <sys/syscall.h> +#include <sys/mman.h> #include <linux/memfd.h> #include <linux/udmabuf.h> +#include "../../kselftest.h" #define TEST_PREFIX "drivers/dma-buf/udmabuf" #define NUM_PAGES 4 +#define NUM_ENTRIES 4 +#define MEMFD_SIZE 1024 /* in pages */ -static int memfd_create(const char *name, unsigned int flags) +static unsigned int page_size; + +static int create_memfd_with_seals(off64_t size, bool hpage) +{ + int memfd, ret; + unsigned int flags = MFD_ALLOW_SEALING; + + if (hpage) + flags |= MFD_HUGETLB; + + memfd = memfd_create("udmabuf-test", flags); + if (memfd < 0) { + ksft_print_msg("%s: [skip,no-memfd]\n", TEST_PREFIX); + exit(KSFT_SKIP); + } + + ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK); + if (ret < 0) { + ksft_print_msg("%s: [skip,fcntl-add-seals]\n", TEST_PREFIX); + exit(KSFT_SKIP); + } + + ret = ftruncate(memfd, size); + if (ret == -1) { + ksft_print_msg("%s: [FAIL,memfd-truncate]\n", TEST_PREFIX); + exit(KSFT_FAIL); + } + + return memfd; +} + +static int create_udmabuf_list(int devfd, int memfd, off64_t memfd_size) +{ + struct udmabuf_create_list *list; + int ubuf_fd, i; + + list = malloc(sizeof(struct udmabuf_create_list) + + sizeof(struct udmabuf_create_item) * NUM_ENTRIES); + if (!list) { + ksft_print_msg("%s: [FAIL, udmabuf-malloc]\n", TEST_PREFIX); + exit(KSFT_FAIL); + } + + for (i = 0; i < NUM_ENTRIES; i++) { + list->list[i].memfd = memfd; + list->list[i].offset = i * (memfd_size / NUM_ENTRIES); + list->list[i].size = getpagesize() * NUM_PAGES; + } + + list->count = NUM_ENTRIES; + list->flags = UDMABUF_FLAGS_CLOEXEC; + ubuf_fd = ioctl(devfd, UDMABUF_CREATE_LIST, list); + free(list); + if (ubuf_fd < 0) { + ksft_print_msg("%s: [FAIL, udmabuf-create]\n", TEST_PREFIX); + exit(KSFT_FAIL); + } + + return ubuf_fd; +} + +static void write_to_memfd(void *addr, off64_t size, char chr) +{ + int i; + + for (i = 0; i < size / page_size; i++) { + *((char *)addr + (i * page_size)) = chr; + } +} + +static void *mmap_fd(int fd, off64_t size) { - return syscall(__NR_memfd_create, name, flags); + void *addr; + + addr = mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); + if (addr == MAP_FAILED) { + ksft_print_msg("%s: ubuf_fd mmap fail\n", TEST_PREFIX); + exit(KSFT_FAIL); + } + + return addr; +} + +static int compare_chunks(void *addr1, void *addr2, off64_t memfd_size) +{ + off64_t off; + int i = 0, j, k = 0, ret = 0; + char char1, char2; + + while (i < NUM_ENTRIES) { + off = i * (memfd_size / NUM_ENTRIES); + for (j = 0; j < NUM_PAGES; j++, k++) { + char1 = *((char *)addr1 + off + (j * getpagesize())); + char2 = *((char *)addr2 + (k * getpagesize())); + if (char1 != char2) { + ret = -1; + goto err; + } + } + i++; + } +err: + munmap(addr1, memfd_size); + munmap(addr2, NUM_ENTRIES * NUM_PAGES * getpagesize()); + return ret; } int main(int argc, char *argv[]) { struct udmabuf_create create; int devfd, memfd, buf, ret; - off_t size; - void *mem; + off64_t size; + void *addr1, *addr2; + + ksft_print_header(); + ksft_set_plan(6); devfd = open("/dev/udmabuf", O_RDWR); if (devfd < 0) { - printf("%s: [skip,no-udmabuf: Unable to access DMA buffer device file]\n", - TEST_PREFIX); - exit(77); + ksft_print_msg( + "%s: [skip,no-udmabuf: Unable to access DMA buffer device file]\n", + TEST_PREFIX); + exit(KSFT_SKIP); } memfd = memfd_create("udmabuf-test", MFD_ALLOW_SEALING); if (memfd < 0) { - printf("%s: [skip,no-memfd]\n", TEST_PREFIX); - exit(77); + ksft_print_msg("%s: [skip,no-memfd]\n", TEST_PREFIX); + exit(KSFT_SKIP); } ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK); if (ret < 0) { - printf("%s: [skip,fcntl-add-seals]\n", TEST_PREFIX); - exit(77); + ksft_print_msg("%s: [skip,fcntl-add-seals]\n", TEST_PREFIX); + exit(KSFT_SKIP); } - size = getpagesize() * NUM_PAGES; ret = ftruncate(memfd, size); if (ret == -1) { - printf("%s: [FAIL,memfd-truncate]\n", TEST_PREFIX); - exit(1); + ksft_print_msg("%s: [FAIL,memfd-truncate]\n", TEST_PREFIX); + exit(KSFT_FAIL); } memset(&create, 0, sizeof(create)); @@ -64,44 +174,86 @@ int main(int argc, char *argv[]) create.offset = getpagesize()/2; create.size = getpagesize(); buf = ioctl(devfd, UDMABUF_CREATE, &create); - if (buf >= 0) { - printf("%s: [FAIL,test-1]\n", TEST_PREFIX); - exit(1); - } + if (buf >= 0) + ksft_test_result_fail("%s: [FAIL,test-1]\n", TEST_PREFIX); + else + ksft_test_result_pass("%s: [PASS,test-1]\n", TEST_PREFIX); /* should fail (size not multiple of page) */ create.memfd = memfd; create.offset = 0; create.size = getpagesize()/2; buf = ioctl(devfd, UDMABUF_CREATE, &create); - if (buf >= 0) { - printf("%s: [FAIL,test-2]\n", TEST_PREFIX); - exit(1); - } + if (buf >= 0) + ksft_test_result_fail("%s: [FAIL,test-2]\n", TEST_PREFIX); + else + ksft_test_result_pass("%s: [PASS,test-2]\n", TEST_PREFIX); /* should fail (not memfd) */ create.memfd = 0; /* stdin */ create.offset = 0; create.size = size; buf = ioctl(devfd, UDMABUF_CREATE, &create); - if (buf >= 0) { - printf("%s: [FAIL,test-3]\n", TEST_PREFIX); - exit(1); - } + if (buf >= 0) + ksft_test_result_fail("%s: [FAIL,test-3]\n", TEST_PREFIX); + else + ksft_test_result_pass("%s: [PASS,test-3]\n", TEST_PREFIX); /* should work */ + page_size = getpagesize(); + addr1 = mmap_fd(memfd, size); + write_to_memfd(addr1, size, 'a'); create.memfd = memfd; create.offset = 0; create.size = size; buf = ioctl(devfd, UDMABUF_CREATE, &create); - if (buf < 0) { - printf("%s: [FAIL,test-4]\n", TEST_PREFIX); - exit(1); - } + if (buf < 0) + ksft_test_result_fail("%s: [FAIL,test-4]\n", TEST_PREFIX); + else + ksft_test_result_pass("%s: [PASS,test-4]\n", TEST_PREFIX); + + munmap(addr1, size); + close(buf); + close(memfd); + + /* should work (migration of 4k size pages)*/ + size = MEMFD_SIZE * page_size; + memfd = create_memfd_with_seals(size, false); + addr1 = mmap_fd(memfd, size); + write_to_memfd(addr1, size, 'a'); + buf = create_udmabuf_list(devfd, memfd, size); + addr2 = mmap_fd(buf, NUM_PAGES * NUM_ENTRIES * getpagesize()); + write_to_memfd(addr1, size, 'b'); + ret = compare_chunks(addr1, addr2, size); + if (ret < 0) + ksft_test_result_fail("%s: [FAIL,test-5]\n", TEST_PREFIX); + else + ksft_test_result_pass("%s: [PASS,test-5]\n", TEST_PREFIX); + + close(buf); + close(memfd); + + /* should work (migration of 2MB size huge pages)*/ + page_size = getpagesize() * 512; /* 2 MB */ + size = MEMFD_SIZE * page_size; + memfd = create_memfd_with_seals(size, true); + addr1 = mmap_fd(memfd, size); + write_to_memfd(addr1, size, 'a'); + buf = create_udmabuf_list(devfd, memfd, size); + addr2 = mmap_fd(buf, NUM_PAGES * NUM_ENTRIES * getpagesize()); + write_to_memfd(addr1, size, 'b'); + ret = compare_chunks(addr1, addr2, size); + if (ret < 0) + ksft_test_result_fail("%s: [FAIL,test-6]\n", TEST_PREFIX); + else + ksft_test_result_pass("%s: [PASS,test-6]\n", TEST_PREFIX); - fprintf(stderr, "%s: ok\n", TEST_PREFIX); close(buf); close(memfd); close(devfd); + + ksft_print_msg("%s: ok\n", TEST_PREFIX); + ksft_print_cnts(); + return 0; } -- 2.43.0

8 months, 2 weeks

1
0
0 0

[PATCH v6 0/5] KVM: arm64: Support for 2023 dpISA extensions

by Mark Brown

This series implements support for the 2023 dpISA extensions in KVM guests, it was previously posted as part of a series with the host support but that has now been merged so only the KVM portions remain. Most of these extensions add only new instructions so the guest support consists of adding the relevant ID registers, masking out other features like the 2023 MTE extensions. FEAT_FPMR introduces a new system register FPMR to the floating point state which we enable guest access to and context switch when the ID registers indicate that it is supported. Currently we implement visibility for FPMR with a fpmr_visibility() function as for other system registers, I will separately look into adding support for specifying this in the struct sys_reg_desc. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v6: - Rebase onto v6.9-rc1. - The host portions of the series were merged so only the KVM guest support remains. - Link to v5: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-0-c568edc8ed7f@kerne… Changes in v5: - Rebase onto v6.8-rc3. - Use u64 rather than unsigned long for storing FPMR. - Temporarily drop KVM guest support due to issues with KVM being a moving target. - Link to v4: https://lore.kernel.org/r/20240122-arm64-2023-dpisa-v4-0-776e094861df@kerne… Changes in v4: - Rebase onto v6.8-rc1. - Move KVM support to the end of the series. - Link to v3: https://lore.kernel.org/r/20231205-arm64-2023-dpisa-v3-0-dbcbcd867a7f@kerne… Changes in v3: - Rebase onto v6.7-rc3. - Hook up traps for FPMR in emulate-nested.c. - Link to v2: https://lore.kernel.org/r/20231114-arm64-2023-dpisa-v2-0-47251894f6a8@kerne… Changes in v2: - Rebase onto v6.7-rc1. - Link to v1: https://lore.kernel.org/r/20231026-arm64-2023-dpisa-v1-0-8470dd989bb2@kerne… --- Mark Brown (5): KVM: arm64: Share all userspace hardened thread data with the hypervisor KVM: arm64: Add newly allocated ID registers to register descriptions KVM: arm64: Support FEAT_FPMR for guests KVM: arm64: selftests: Document feature registers added in 2023 extensions KVM: arm64: selftests: Teach get-reg-list about FPMR arch/arm64/include/asm/kvm_host.h | 6 ++++-- arch/arm64/include/asm/processor.h | 2 +- arch/arm64/kvm/emulate-nested.c | 9 ++++++++ arch/arm64/kvm/fpsimd.c | 15 +++++++------- arch/arm64/kvm/hyp/include/hyp/switch.h | 9 ++++++-- arch/arm64/kvm/hyp/nvhe/hyp-main.c | 4 ++-- arch/arm64/kvm/sys_regs.c | 24 +++++++++++++++++++--- tools/testing/selftests/kvm/aarch64/get-reg-list.c | 11 ++++++++-- 8 files changed, 60 insertions(+), 20 deletions(-) --- base-commit: 4cece764965020c22cff7665b18a012006359095 change-id: 20231003-arm64-2023-dpisa-2f3d25746474 Best regards, -- Mark Brown <broonie(a)kernel.org>

8 months, 2 weeks

2
15
0 0

[PATCH net-next 0/4] selftests: move bpf-offload test from bpf to net

by Jakub Kicinski

The test_offload.py test fits in networking and bpf equally well. We started adding more Python tests in networking and some of the code in test_offload.py can be reused, so move it to networking. Looks like it bit rotted over time and some fixes are needed. Admittedly more code could be extracted but I only had the time for a minor cleanup :( Jakub Kicinski (4): selftests: move bpf-offload test from bpf to net selftests: net: bpf_offload: wait for maps selftests: net: declare section names for bpf_offload selftests: net: reuse common code in bpf_offload tools/testing/selftests/bpf/Makefile | 1 - tools/testing/selftests/net/Makefile | 11 +- .../test_offload.py => net/bpf_offload.py} | 138 +++++------------- tools/testing/selftests/net/lib/py/nsim.py | 9 +- .../sample_map_ret0.bpf.c} | 2 +- .../sample_ret0.c => net/sample_ret0.bpf.c} | 3 + 6 files changed, 57 insertions(+), 107 deletions(-) rename tools/testing/selftests/{bpf/test_offload.py => net/bpf_offload.py} (93%) rename tools/testing/selftests/{bpf/progs/sample_map_ret0.c => net/sample_map_ret0.bpf.c} (96%) rename tools/testing/selftests/{bpf/progs/sample_ret0.c => net/sample_ret0.bpf.c} (70%) -- 2.44.0

8 months, 2 weeks

5
10
0 0

[PATCH v4 0/7] Extend HID-BPF kfuncs (was: allow HID-BPF to do device IOs)

by Benjamin Tissoires

New version of the sleepable bpf_timer code, without BPF changes, as they can now go through the HID tree independantly: https://lore.kernel.org/all/20240315-hid-bpf-sleepable-v4-0-5658f2540564@ke… For reference, the use cases I have in mind: --- Basically, I need to be able to defer a HID-BPF program for the following reasons (from the aforementioned patch): 1. defer an event: Sometimes we receive an out of proximity event, but the device can not be trusted enough, and we need to ensure that we won't receive another one in the following n milliseconds. So we need to wait those n milliseconds, and eventually re-inject that event in the stack. 2. inject new events in reaction to one given event: We might want to transform one given event into several. This is the case for macro keys where a single key press is supposed to send a sequence of key presses. But this could also be used to patch a faulty behavior, if a device forgets to send a release event. 3. communicate with the device in reaction to one event: We might want to communicate back to the device after a given event. For example a device might send us an event saying that it came back from sleeping state and needs to be re-initialized. Currently we can achieve that by keeping a userspace program around, raise a bpf event, and let that userspace program inject the events and commands. However, we are just keeping that program alive as a daemon for just scheduling commands. There is no logic in it, so it doesn't really justify an actual userspace wakeup. So a kernel workqueue seems simpler to handle. bpf_timers are currently running in a soft IRQ context, this patch series implements a sleppable context for them. Cheers, Benjamin To: Jiri Kosina <jikos(a)kernel.org> To: Benjamin Tissoires <benjamin.tissoires(a)redhat.com> To: Jonathan Corbet <corbet(a)lwn.net> To: Shuah Khan <shuah(a)kernel.org> Cc: Benjamin Tissoires <bentiss(a)kernel.org> Cc: <linux-input(a)vger.kernel.org> Cc: <linux-kernel(a)vger.kernel.org> Cc: <bpf(a)vger.kernel.org> Cc: <linux-doc(a)vger.kernel.org> Cc: <linux-kselftest(a)vger.kernel.org> --- Changes in v4: - dropped the BPF changes, they can go independently in bpf-core - dropped the HID-BPF integration tests with the sleppable timers, I'll re-add them once both series (this and sleepable timers) are merged - Link to v3: https://lore.kernel.org/r/20240221-hid-bpf-sleepable-v3-0-1fb378ca6301@kern… Changes in v3: - fixed the crash from v2 - changed the API to have only BPF_F_TIMER_SLEEPABLE for bpf_timer_start() - split the new kfuncs/verifier patch into several sub-patches, for easier reviews - Link to v2: https://lore.kernel.org/r/20240214-hid-bpf-sleepable-v2-0-5756b054724d@kern… Changes in v2: - make use of bpf_timer (and dropped the custom HID handling) - implemented bpf_timer_set_sleepable_cb as a kfunc - still not implemented global subprogs - no sleepable bpf_timer selftests yet - Link to v1: https://lore.kernel.org/r/20240209-hid-bpf-sleepable-v1-0-4cc895b5adbd@kern… --- Benjamin Tissoires (7): HID: bpf/dispatch: regroup kfuncs definitions HID: bpf: export hid_hw_output_report as a BPF kfunc selftests/hid: add KASAN to the VM tests selftests/hid: Add test for hid_bpf_hw_output_report HID: bpf: allow to inject HID event from BPF selftests/hid: add tests for hid_bpf_input_report HID: bpf: allow to use bpf_timer_set_sleepable_cb() in tracing callbacks. Documentation/hid/hid-bpf.rst | 2 +- drivers/hid/bpf/hid_bpf_dispatch.c | 226 ++++++++++++++------- drivers/hid/hid-core.c | 2 + include/linux/hid_bpf.h | 3 + tools/testing/selftests/hid/config.common | 1 + tools/testing/selftests/hid/hid_bpf.c | 112 +++++++++- tools/testing/selftests/hid/progs/hid.c | 46 +++++ .../testing/selftests/hid/progs/hid_bpf_helpers.h | 6 + 8 files changed, 324 insertions(+), 74 deletions(-) --- base-commit: 3e78a6c0d3e02e4cf881dc84c5127e9990f939d6 change-id: 20240314-b4-hid-bpf-new-funcs-ecf05d0ef870 Best regards, -- Benjamin Tissoires <bentiss(a)kernel.org>

8 months, 2 weeks

3
11
0 0

[PATCH v2] selftests: sud_test: return correct emulated syscall value on RISC-V

by Clément Léger

Currently, the sud_test expects the emulated syscall to return the emulated syscall number. This assumption only works on architectures were the syscall calling convention use the same register for syscall number/syscall return value. This is not the case for RISC-V and thus the return value must be also emulated using the provided ucontext. Signed-off-by: Clément Léger <cleger(a)rivosinc.com> Reviewed-by: Palmer Dabbelt <palmer(a)rivosinc.com> Acked-by: Palmer Dabbelt <palmer(a)rivosinc.com> --- Changes in V2: - Changes comment to be more explicit - Use A7 syscall arg rather than hardcoding MAGIC_SYSCALL_1 --- .../selftests/syscall_user_dispatch/sud_test.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/tools/testing/selftests/syscall_user_dispatch/sud_test.c b/tools/testing/selftests/syscall_user_dispatch/sud_test.c index b5d592d4099e..d975a6767329 100644 --- a/tools/testing/selftests/syscall_user_dispatch/sud_test.c +++ b/tools/testing/selftests/syscall_user_dispatch/sud_test.c @@ -158,6 +158,20 @@ static void handle_sigsys(int sig, siginfo_t *info, void *ucontext) /* In preparation for sigreturn. */ SYSCALL_DISPATCH_OFF(glob_sel); + + /* + * The tests for argument handling assume that `syscall(x) == x`. This + * is a NOP on x86 because the syscall number is passed in %rax, which + * happens to also be the function ABI return register. Other + * architectures may need to swizzle the arguments around. + */ +#if defined(__riscv) +/* REG_A7 is not defined in libc headers */ +# define REG_A7 (REG_A0 + 7) + + ((ucontext_t *)ucontext)->uc_mcontext.__gregs[REG_A0] = + ((ucontext_t *)ucontext)->uc_mcontext.__gregs[REG_A7]; +#endif } TEST(dispatch_and_return) -- 2.43.0

8 months, 2 weeks

3
2
0 0

[PATCH net-next v5 0/6] net: gro: encapsulation bug fix and flush checks improvements

by Richard Gobert

This series fixes a bug in the complete phase of UDP in GRO, in which socket lookup fails due to using network_header when parsing encapsulated packets. The fix is to pass p_off parameter in *_gro_complete. Next, the fields network_offset and inner_network_offset are added to napi_gro_cb, and are both set during the receive phase of GRO. This is then leveraged in the next commit to remove flush_id state from napi_gro_cb, and stateful code in {ipv6,inet}_gro_receive which may be unnecessarily complicated due to encapsulation support in GRO. In addition, udpgro_fwd selftest is adjusted to include the socket lookup case for vxlan. This selftest will test its supposed functionality once local bind support is merged (https://lore.kernel.org/netdev/df300a49-7811-4126-a56a-a77100c8841b@gmail.c…). v4 -> v5: - Add 1st commit - flush id checks in udp_gro_receive segment which can be backported by itself - Add TCP measurements for the 5th commit - Add flush id tests to ensure flush id logic is preserved in GRO - Simplify gro_inet_flush by removing a branch - v4: https://lore.kernel.org/all/20240325182543.87683-1-richardbgobert@gmail.com/ v3 -> v4: - Fix code comment and commit message typos - v3: https://lore.kernel.org/all/f939c84a-2322-4393-a5b0-9b1e0be8ed8e@gmail.com/ v2 -> v3: - Use napi_gro_cb instead of skb->{offset} - v2: https://lore.kernel.org/all/2ce1600b-e733-448b-91ac-9d0ae2b866a4@gmail.com/ v1 -> v2: - Pass p_off in *_gro_complete to fix UDP bug - Remove more conditionals and memory fetches from inet_gro_flush - v1: https://lore.kernel.org/netdev/e1d22505-c5f8-4c02-a997-64248480338b@gmail.c… Richard Gobert (6): net: gro: add flush check in udp_gro_receive_segment net: gro: add p_off param in *_gro_complete selftests/net: add local address bind in vxlan selftest net: gro: add {inner_}network_offset to napi_gro_cb net: gro: move L3 flush checks to tcp_gro_receive selftests/net: add flush id selftests drivers/net/geneve.c | 7 +- drivers/net/vxlan/vxlan_core.c | 11 +- include/linux/etherdevice.h | 2 +- include/linux/netdevice.h | 3 +- include/linux/udp.h | 2 +- include/net/gro.h | 93 ++++++++++++-- include/net/inet_common.h | 2 +- include/net/tcp.h | 6 +- include/net/udp.h | 8 +- include/net/udp_tunnel.h | 2 +- net/8021q/vlan_core.c | 6 +- net/core/gro.c | 7 +- net/ethernet/eth.c | 5 +- net/ipv4/af_inet.c | 54 +------- net/ipv4/fou_core.c | 9 +- net/ipv4/gre_offload.c | 6 +- net/ipv4/tcp_offload.c | 22 +--- net/ipv4/udp.c | 3 +- net/ipv4/udp_offload.c | 31 +++-- net/ipv6/ip6_offload.c | 41 +++--- net/ipv6/tcpv6_offload.c | 7 +- net/ipv6/udp.c | 3 +- net/ipv6/udp_offload.c | 13 +- tools/testing/selftests/net/gro.c | 144 ++++++++++++++++++++++ tools/testing/selftests/net/udpgro_fwd.sh | 10 +- 25 files changed, 336 insertions(+), 161 deletions(-) -- 2.36.1

8 months, 2 weeks

2
8
0 0

[PATCH bpf-next 00/14] use start_server and connect_to helpers

by Geliang Tang

From: Geliang Tang <tanggeliang(a)kylinos.cn> This patchset uses public helpers start_server_* and connect_to_* defined in network_helpers.c to drop duplicate code. Geliang Tang (14): selftests/bpf: Add start_server_addr helper selftests/bpf: Use start_server_addr in cls_redirect selftests/bpf: Use connect_to_addr in cls_redirect selftests/bpf: Use start_server_addr in sk_assign selftests/bpf: Use connect_to_addr in sk_assign selftests/bpf: Use log_err in network_helpers selftests/bpf: Use start_server_addr in test_sock_addr selftests/bpf: Use connect_to_addr in test_sock_addr selftests/bpf: Add function pointer for __start_server selftests/bpf: Add start_server_setsockopt helper selftests/bpf: Use start_server_setsockopt in sockopt_inherit selftests/bpf: Use connect_to_fd in sockopt_inherit selftests/bpf: Use start_server_* in test_tcp_check_syncookie selftests/bpf: Use connect_to_addr in test_tcp_check_syncookie tools/testing/selftests/bpf/Makefile | 4 +- tools/testing/selftests/bpf/network_helpers.c | 53 +++++++++---- tools/testing/selftests/bpf/network_helpers.h | 4 + .../selftests/bpf/prog_tests/cls_redirect.c | 38 +--------- .../selftests/bpf/prog_tests/sk_assign.c | 53 +------------ .../bpf/prog_tests/sockopt_inherit.c | 64 ++++------------ tools/testing/selftests/bpf/test_sock_addr.c | 74 ++---------------- .../bpf/test_tcp_check_syncookie_user.c | 76 +++---------------- 8 files changed, 85 insertions(+), 281 deletions(-) -- 2.40.1

8 months, 2 weeks

1
15
0 0

kselftest/next kselftest-livepatch: 1 runs, 1 regressions (v6.9-rc2-16-gf8a3e7c8a5aa2)

by kernelci.org bot

kselftest/next kselftest-livepatch: 1 runs, 1 regressions (v6.9-rc2-16-gf8a3e7c8a5aa2) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ----------------+------+---------------+----------+------------------------------+------------ imx6q-sabrelite | arm | lab-collabora | gcc-10 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v6.9-rc2-16-gf8a… Test: kselftest-livepatch Tree: kselftest Branch: next Describe: v6.9-rc2-16-gf8a3e7c8a5aa2 URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: f8a3e7c8a5aa2c6ba90a014edbaf827c12da80c9 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ----------------+------+---------------+----------+------------------------------+------------ imx6q-sabrelite | arm | lab-collabora | gcc-10 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/66162103f432b107544c42da Results: 1 PASS, 1 FAIL, 0 SKIP Full config: multi_v7_defconfig+kselftest Compiler: gcc-10 (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//kselftest/next/v6.9-rc2-16-gf8a3e7c8a5aa2/arm… HTML log: https://storage.kernelci.org//kselftest/next/v6.9-rc2-16-gf8a3e7c8a5aa2/arm… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-livepatch.shardfile-livepatch: https://kernelci.org/test/case/id/66162103f432b107544c42dc failing since 55 days (last pass: v6.8-rc1, first fail: v6.8-rc1-32-g345e8abe4c355) 2024-04-10T05:25:23.733705 / # 2024-04-10T05:25:23.743418 2024-04-10T05:25:28.884756 / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/13322914/extract-nfsrootfs-cijwayce' 2024-04-10T05:25:28.895715 export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/13322914/extract-nfsrootfs-cijwayce' 2024-04-10T05:25:31.130036 / # export NFS_SERVER_IP='192.168.201.1' 2024-04-10T05:25:31.140938 export NFS_SERVER_IP='192.168.201.1' 2024-04-10T05:25:31.259935 / # # 2024-04-10T05:25:31.268885 # 2024-04-10T05:25:31.385922 / # export SHELL=/bin/bash 2024-04-10T05:25:31.396168 export SHELL=/bin/bash ... (128 line(s) more)

8 months, 2 weeks

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror April 2024