June 2024 - Linux-kselftest-mirror

[PATCH v2] selftests/capabilities: Fix possible file leak in copy_fromat_to

by Ma Ke

The open() function returns -1 on error. openat() and open() initialize 'from' and 'to', and only 'from' validated with 'if' statement. If the initialization of variable 'to' fails, we should better check the value of 'to' and close 'from' to avoid possible file leak. Improve the checking of 'from' additionally. Fixes: 32ae976ed3b5 ("selftests/capabilities: Add tests for capability evolution") Signed-off-by: Ma Ke <make24(a)iscas.ac.cn> --- Changes in v2: - modified the patch according to suggestions; - found by customized static analysis tool. --- tools/testing/selftests/capabilities/test_execve.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/capabilities/test_execve.c b/tools/testing/selftests/capabilities/test_execve.c index 47bad7ddc5bc..6406ab6aa1f5 100644 --- a/tools/testing/selftests/capabilities/test_execve.c +++ b/tools/testing/selftests/capabilities/test_execve.c @@ -145,10 +145,14 @@ static void chdir_to_tmpfs(void) static void copy_fromat_to(int fromfd, const char *fromname, const char *toname) { int from = openat(fromfd, fromname, O_RDONLY); - if (from == -1) + if (from < 0) ksft_exit_fail_msg("open copy source - %s\n", strerror(errno)); int to = open(toname, O_CREAT | O_WRONLY | O_EXCL, 0700); + if (to < 0) { + close(from); + ksft_exit_fail_msg("open copy destination - %s\n", strerror(errno)); + } while (true) { char buf[4096]; -- 2.25.1

16 minutes

1
0
0 0

[PATCH net-next v14 00/13] Device Memory TCP

by Mina Almasry

v14: https://patchwork.kernel.org/project/netdevbpf/list/?series=865135&archive=… ==== No material changes in this version. Only rebase and re-verification on top of net-next. v13, I think, raced with commit ebad6d0334793 ("net/ipv4: Use nested-BH locking for ipv4_tcp_sk.") being merged to net-next that caused a patchwork failure to apply. This series should apply cleanly on commit c4532232fa2a4 ("selftests: net: remove unneeded IP_GRE config"). I did not wait the customary 24hr as Jakub said it's OK to repost as soon as I build test the rebased version: https://lore.kernel.org/netdev/20240625075926.146d769d@kernel.org/ v13: https://patchwork.kernel.org/project/netdevbpf/list/?series=861406&archive=… ==== Major changes: -------------- This iteration addresses Pavel's review comments, applies his reviewed-by's, and seeks to fix the patchwork build error (sorry!). As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v13/ v12: https://patchwork.kernel.org/project/netdevbpf/list/?series=859747&state=* ==== Major changes: -------------- This iteration only addresses one minor comment from Pavel with regards to the trace printing of netmem, and the patchwork build error introduced in v11 because I missed doing an allmodconfig build, sorry. Other than that v11, AFAICT, received no feedback. There is one discussion about how the specifics of plugging io uring memory through the page pool, but not relevant to content in this particular patchset, AFAICT. As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v12/ v11: https://patchwork.kernel.org/project/netdevbpf/list/?series=857457&state=* ==== Major Changes: -------------- v11 addresses feedback received in v10. The major change is the removal of the memory provider ops as requested by Christoph. We still accomplish the same thing, but utilizing direct function calls with if statements rather than generic ops. Additionally address sparse warnings, bugs and review comments from folks that reviewed. As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v11/ Detailed changelog: ------------------- - Fixes in netdev_rx_queue_restart() from Pavel & David. - Remove commit e650e8c3a36f5 ("net: page_pool: create hooks for custom page providers") from the series to address Christoph's feedback and rebased other patches on the series on this change. - Fixed build errors with CONFIG_DMA_SHARED_BUFFER && !CONFIG_GENERIC_ALLOCATOR build. - Fixed sparse warnings pointed out by Paolo. - Drop unnecessary gro_pull_from_frag0 checks. - Added Bagas reviewed-by to docs. Cc: Bagas Sanjaya <bagasdotme(a)gmail.com> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Christoph Hellwig <hch(a)infradead.org> Cc: Nikolay Aleksandrov <razor(a)blackwall.org> v10: https://patchwork.kernel.org/project/netdevbpf/list/?series=852422&state=* ==== Major Changes: -------------- v9 was sent right before the merge window closed (sorry!). v10 is almost a re-send of the series now that the merge window re-opened. Only rebased to latest net-next and addressed some minor iterative comments received on v9. As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v10/ Detailed changelog: ------------------- - Fixed tokens leaking in DONTNEED setsockopt (Nikolay). - Moved net_iov_dma_addr() to devmem.c and made it a devmem specific helpers (David). - Rename hook alloc_pages to alloc_netmems as alloc_pages is now preprocessor macro defined and causes a build error. v9: === Major Changes: -------------- GVE queue API has been merged. Submitting this version as non-RFC after rebasing on top of the merged API, and dropped the out of tree queue API I was carrying on github. Addressed the little feedback v8 has received. Detailed changelog: ------------------ - Added new patch from David Wei to this series for netdev_rx_queue_restart() - Fixed sparse error. - Removed CONFIG_ checks in netmem_is_net_iov() - Flipped skb->readable to skb->unreadable - Minor fixes to selftests & docs. RFC v8: ======= Major Changes: -------------- - Fixed build error generated by patch-by-patch build. - Applied docs suggestions from Randy. RFC v7: ======= Major Changes: -------------- This revision largely rebases on top of net-next and addresses the feedback RFCv6 received from folks, namely Jakub, Yunsheng, Arnd, David, & Pavel. The series remains in RFC because the queue-API ndos defined in this series are not yet implemented. I have a GVE implementation I carry out of tree for my testing. A upstreamable GVE implementation is in the works. Aside from that, in my estimation all the patches are ready for review/merge. Please do take a look. As usual the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v7/ Detailed changelog: - Use admin-perm in netlink API. - Addressed feedback from Jakub with regards to netlink API implementation. - Renamed devmem.c functions to something more appropriate for that file. - Improve the performance seen through the page_pool benchmark. - Fix the value definition of all the SO_DEVMEM_* uapi. - Various fixes to documentation. Perf - page-pool benchmark: --------------------------- Improved performance of bench_page_pool_simple.ko tests compared to v6: https://pastebin.com/raw/v5dYRg8L net-next base: 8 cycle fast path. RFC v6: 10 cycle fast path. RFC v7: 9 cycle fast path. RFC v7 with CONFIG_DMA_SHARED_BUFFER disabled: 8 cycle fast path, same as baseline. Perf - Devmem TCP benchmark: --------------------- Perf is about the same regardless of the changes in v7, namely the removal of the static_branch_unlikely to improve the page_pool benchmark performance: 189/200gbps bi-directional throughput with RX devmem TCP and regular TCP TX i.e. ~95% line rate. RFC v6: ======= Major Changes: -------------- This revision largely rebases on top of net-next and addresses the little feedback RFCv5 received. The series remains in RFC because the queue-API ndos defined in this series are not yet implemented. I have a GVE implementation I carry out of tree for my testing. A upstreamable GVE implementation is in the works. Aside from that, in my estimation all the patches are ready for review/merge. Please do take a look. As usual the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v6/ This version also comes with some performance data recorded in the cover letter (see below changelog). Detailed changelog: - Rebased on top of the merged netmem_ref changes. - Converted skb->dmabuf to skb->readable (Pavel). Pavel's original suggestion was to remove the skb->dmabuf flag entirely, but when I looked into it closely, I found the issue that if we remove the flag we have to dereference the shinfo(skb) pointer to obtain the first frag to tell whether an skb is readable or not. This can cause a performance regression if it dirties the cache line when the shinfo(skb) was not really needed. Instead, I converted the skb->dmabuf flag into a generic skb->readable flag which can be re-used by io_uring 0-copy RX. - Squashed a few locking optimizations from Eric Dumazet in the RX path and the DEVMEM_DONTNEED setsockopt. - Expanded the tests a bit. Added validation for invalid scenarios and added some more coverage. Perf - page-pool benchmark: --------------------------- bench_page_pool_simple.ko tests with and without these changes: https://pastebin.com/raw/ncHDwAbn AFAIK the number that really matters in the perf tests is the 'tasklet_page_pool01_fast_path Per elem'. This one measures at about 8 cycles without the changes but there is some 1 cycle noise in some results. With the patches this regresses to 9 cycles with the changes but there is 1 cycle noise occasionally running this test repeatedly. Lastly I tried disable the static_branch_unlikely() in netmem_is_net_iov() check. To my surprise disabling the static_branch_unlikely() check reduces the fast path back to 8 cycles, but the 1 cycle noise remains. Perf - Devmem TCP benchmark: --------------------- 189/200gbps bi-directional throughput with RX devmem TCP and regular TCP TX i.e. ~95% line rate. Major changes in RFC v5: ======================== 1. Rebased on top of 'Abstract page from net stack' series and used the new netmem type to refer to LSB set pointers instead of re-using struct page. 2. Downgraded this series back to RFC and called it RFC v5. This is because this series is now dependent on 'Abstract page from net stack'[1] and the queue API. Both are removed from the series to reduce the patch # and those bits are fairly independent or pre-requisite work. 3. Reworked the page_pool devmem support to use netmem and for some more unified handling. 4. Reworked the reference counting of net_iov (renamed from page_pool_iov) to use pp_ref_count for refcounting. The full changes including the dependent series and GVE page pool support is here: https://github.com/mina/linux/commits/tcpdevmem-rfcv5/ [1] https://patchwork.kernel.org/project/netdevbpf/list/?series=810774 Major changes in v1: ==================== 1. Implemented MVP queue API ndos to remove the userspace-visible driver reset. 2. Fixed issues in the napi_pp_put_page() devmem frag unref path. 3. Removed RFC tag. Many smaller addressed comments across all the patches (patches have individual change log). Full tree including the rest of the GVE driver changes: https://github.com/mina/linux/commits/tcpdevmem-v1 Changes in RFC v3: ================== 1. Pulled in the memory-provider dependency from Jakub's RFC[1] to make the series reviewable and mergeable. 2. Implemented multi-rx-queue binding which was a todo in v2. 3. Fix to cmsg handling. The sticking point in RFC v2[2] was the device reset required to refill the device rx-queues after the dmabuf bind/unbind. The solution suggested as I understand is a subset of the per-queue management ops Jakub suggested or similar: https://lore.kernel.org/netdev/20230815171638.4c057dcd@kernel.org/ This is not addressed in this revision, because: 1. This point was discussed at netconf & netdev and there is openness to using the current approach of requiring a device reset. 2. Implementing individual queue resetting seems to be difficult for my test bed with GVE. My prototype to test this ran into issues with the rx-queues not coming back up properly if reset individually. At the moment I'm unsure if it's a mistake in the POC or a genuine issue in the virtualization stack behind GVE, which currently doesn't test individual rx-queue restart. 3. Our usecases are not bothered by requiring a device reset to refill the buffer queues, and we'd like to support NICs that run into this limitation with resetting individual queues. My thought is that drivers that have trouble with per-queue configs can use the support in this series, while drivers that support new netdev ops to reset individual queues can automatically reset the queue as part of the dma-buf bind/unbind. The same approach with device resets is presented again for consideration with other sticking points addressed. This proposal includes the rx devmem path only proposed for merge. For a snapshot of my entire tree which includes the GVE POC page pool support & device memory support: https://github.com/torvalds/linux/compare/master...mina:linux:tcpdevmem-v3 [1] https://lore.kernel.org/netdev/f8270765-a27b-6ccf-33ea-cda097168d79@redhat.… [2] https://lore.kernel.org/netdev/CAHS8izOVJGJH5WF68OsRWFKJid1_huzzUK+hpKbLcL4… Changes in RFC v2: ================== The sticking point in RFC v1[1] was the dma-buf pages approach we used to deliver the device memory to the TCP stack. RFC v2 is a proof-of-concept that attempts to resolve this by implementing scatterlist support in the networking stack, such that we can import the dma-buf scatterlist directly. This is the approach proposed at a high level here[2]. Detailed changes: 1. Replaced dma-buf pages approach with importing scatterlist into the page pool. 2. Replace the dma-buf pages centric API with a netlink API. 3. Removed the TX path implementation - there is no issue with implementing the TX path with scatterlist approach, but leaving out the TX path makes it easier to review. 4. Functionality is tested with this proposal, but I have not conducted perf testing yet. I'm not sure there are regressions, but I removed perf claims from the cover letter until they can be re-confirmed. 5. Added Signed-off-by: contributors to the implementation. 6. Fixed some bugs with the RX path since RFC v1. Any feedback welcome, but specifically the biggest pending questions needing feedback IMO are: 1. Feedback on the scatterlist-based approach in general. 2. Netlink API (Patch 1 & 2). 3. Approach to handle all the drivers that expect to receive pages from the page pool (Patch 6). [1] https://lore.kernel.org/netdev/dfe4bae7-13a0-3c5d-d671-f61b375cb0b4@gmail.c… [2] https://lore.kernel.org/netdev/CAHS8izPm6XRS54LdCDZVd0C75tA1zHSu6jLVO8nzTLX… ================== * TL;DR: Device memory TCP (devmem TCP) is a proposal for transferring data to and/or from device memory efficiently, without bouncing the data to a host memory buffer. * Problem: A large amount of data transfers have device memory as the source and/or destination. Accelerators drastically increased the volume of such transfers. Some examples include: - ML accelerators transferring large amounts of training data from storage into GPU/TPU memory. In some cases ML training setup time can be as long as 50% of TPU compute time, improving data transfer throughput & efficiency can help improving GPU/TPU utilization. - Distributed training, where ML accelerators, such as GPUs on different hosts, exchange data among them. - Distributed raw block storage applications transfer large amounts of data with remote SSDs, much of this data does not require host processing. Today, the majority of the Device-to-Device data transfers the network are implemented as the following low level operations: Device-to-Host copy, Host-to-Host network transfer, and Host-to-Device copy. The implementation is suboptimal, especially for bulk data transfers, and can put significant strains on system resources, such as host memory bandwidth, PCIe bandwidth, etc. One important reason behind the current state is the kernel’s lack of semantics to express device to network transfers. * Proposal: In this patch series we attempt to optimize this use case by implementing socket APIs that enable the user to: 1. send device memory across the network directly, and 2. receive incoming network packets directly into device memory. Packet _payloads_ go directly from the NIC to device memory for receive and from device memory to NIC for transmit. Packet _headers_ go to/from host memory and are processed by the TCP/IP stack normally. The NIC _must_ support header split to achieve this. Advantages: - Alleviate host memory bandwidth pressure, compared to existing network-transfer + device-copy semantics. - Alleviate PCIe BW pressure, by limiting data transfer to the lowest level of the PCIe tree, compared to traditional path which sends data through the root complex. * Patch overview: ** Part 1: netlink API Gives user ability to bind dma-buf to an RX queue. ** Part 2: scatterlist support Currently the standard for device memory sharing is DMABUF, which doesn't generate struct pages. On the other hand, networking stack (skbs, drivers, and page pool) operate on pages. We have 2 options: 1. Generate struct pages for dmabuf device memory, or, 2. Modify the networking stack to process scatterlist. Approach #1 was attempted in RFC v1. RFC v2 implements approach #2. ** part 3: page pool support We piggy back on page pool memory providers proposal: https://github.com/kuba-moo/linux/tree/pp-providers It allows the page pool to define a memory provider that provides the page allocation and freeing. It helps abstract most of the device memory TCP changes from the driver. ** part 4: support for unreadable skb frags Page pool iovs are not accessible by the host; we implement changes throughput the networking stack to correctly handle skbs with unreadable frags. ** Part 5: recvmsg() APIs We define user APIs for the user to send and receive device memory. Not included with this series is the GVE devmem TCP support, just to simplify the review. Code available here if desired: https://github.com/mina/linux/tree/tcpdevmem This series is built on top of net-next with Jakub's pp-providers changes cherry-picked. * NIC dependencies: 1. (strict) Devmem TCP require the NIC to support header split, i.e. the capability to split incoming packets into a header + payload and to put each into a separate buffer. Devmem TCP works by using device memory for the packet payload, and host memory for the packet headers. 2. (optional) Devmem TCP works better with flow steering support & RSS support, i.e. the NIC's ability to steer flows into certain rx queues. This allows the sysadmin to enable devmem TCP on a subset of the rx queues, and steer devmem TCP traffic onto these queues and non devmem TCP elsewhere. The NIC I have access to with these properties is the GVE with DQO support running in Google Cloud, but any NIC that supports these features would suffice. I may be able to help reviewers bring up devmem TCP on their NICs. * Testing: The series includes a udmabuf kselftest that show a simple use case of devmem TCP and validates the entire data path end to end without a dependency on a specific dmabuf provider. ** Test Setup Kernel: net-next with this series and memory provider API cherry-picked locally. Hardware: Google Cloud A3 VMs. NIC: GVE with header split & RSS & flow steering support. Cc: Pavel Begunkov <asml.silence(a)gmail.com> Cc: David Wei <dw(a)davidwei.uk> Cc: Jason Gunthorpe <jgg(a)ziepe.ca> Cc: Yunsheng Lin <linyunsheng(a)huawei.com> Cc: Shailend Chand <shailend(a)google.com> Cc: Harshitha Ramamurthy <hramamurthy(a)google.com> Cc: Shakeel Butt <shakeel.butt(a)linux.dev> Cc: Jeroen de Borst <jeroendb(a)google.com> Cc: Praveen Kaligineedi <pkaligineedi(a)google.com> Mina Almasry (13): netdev: add netdev_rx_queue_restart() net: netdev netlink api to bind dma-buf to a net device netdev: support binding dma-buf to netdevice netdev: netdevice devmem allocator page_pool: convert to use netmem page_pool: devmem support memory-provider: dmabuf devmem memory provider net: support non paged skb frags net: add support for skbs with unreadable frags tcp: RX path for devmem TCP net: add SO_DEVMEM_DONTNEED setsockopt to release RX frags net: add devmem TCP documentation selftests: add ncdevmem, netcat for devmem TCP Documentation/netlink/specs/netdev.yaml | 57 +++ Documentation/networking/devmem.rst | 258 +++++++++++ Documentation/networking/index.rst | 1 + arch/alpha/include/uapi/asm/socket.h | 6 + arch/mips/include/uapi/asm/socket.h | 6 + arch/parisc/include/uapi/asm/socket.h | 6 + arch/sparc/include/uapi/asm/socket.h | 6 + include/linux/skbuff.h | 61 ++- include/linux/skbuff_ref.h | 11 +- include/linux/socket.h | 1 + include/net/devmem.h | 124 ++++++ include/net/mp_dmabuf_devmem.h | 44 ++ include/net/netdev_rx_queue.h | 5 + include/net/netmem.h | 208 ++++++++- include/net/page_pool/helpers.h | 124 ++++-- include/net/page_pool/types.h | 22 +- include/net/sock.h | 2 + include/net/tcp.h | 5 +- include/trace/events/page_pool.h | 30 +- include/uapi/asm-generic/socket.h | 6 + include/uapi/linux/netdev.h | 19 + include/uapi/linux/uio.h | 17 + net/bpf/test_run.c | 5 +- net/core/Makefile | 3 +- net/core/datagram.c | 6 + net/core/dev.c | 6 +- net/core/devmem.c | 376 ++++++++++++++++ net/core/gro.c | 3 +- net/core/netdev-genl-gen.c | 23 + net/core/netdev-genl-gen.h | 6 + net/core/netdev-genl.c | 103 +++++ net/core/netdev_rx_queue.c | 74 ++++ net/core/page_pool.c | 362 +++++++++------- net/core/skbuff.c | 83 +++- net/core/sock.c | 61 +++ net/ipv4/esp4.c | 3 +- net/ipv4/tcp.c | 261 +++++++++++- net/ipv4/tcp_input.c | 13 +- net/ipv4/tcp_ipv4.c | 16 + net/ipv4/tcp_minisocks.c | 2 + net/ipv4/tcp_output.c | 5 +- net/ipv6/esp6.c | 3 +- net/packet/af_packet.c | 4 +- tools/include/uapi/linux/netdev.h | 19 + tools/testing/selftests/net/.gitignore | 1 + tools/testing/selftests/net/Makefile | 5 + tools/testing/selftests/net/ncdevmem.c | 542 ++++++++++++++++++++++++ 47 files changed, 2753 insertions(+), 251 deletions(-) create mode 100644 Documentation/networking/devmem.rst create mode 100644 include/net/devmem.h create mode 100644 include/net/mp_dmabuf_devmem.h create mode 100644 net/core/devmem.c create mode 100644 net/core/netdev_rx_queue.c create mode 100644 tools/testing/selftests/net/ncdevmem.c -- 2.45.2.741.gdbec12cfda-goog

1 hour, 27 minutes

4
17
0 0

[PATCH] selftests/bpf: improve file descriptor closure handling

by Ma Ke

serial_test_fexit_stress() has a non-robust handling of file descriptor closure. If an error occurs, the function may exit without closing open file descriptors, potentially causing resource leaks. Fix the issue by closing file descriptors in reverse order and starting from the last opened. Ensure proper closure even if an error occurs early. Fixes: 8fb9fb2f1728 ("selftests/bpf: Query BPF_MAX_TRAMP_LINKS using BTF") Signed-off-by: Ma Ke <make24(a)iscas.ac.cn> --- tools/testing/selftests/bpf/prog_tests/fexit_stress.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/fexit_stress.c b/tools/testing/selftests/bpf/prog_tests/fexit_stress.c index 596536def43d..b1980bd61583 100644 --- a/tools/testing/selftests/bpf/prog_tests/fexit_stress.c +++ b/tools/testing/selftests/bpf/prog_tests/fexit_stress.c @@ -49,11 +49,14 @@ void serial_test_fexit_stress(void) ASSERT_OK(err, "bpf_prog_test_run_opts"); out: - for (i = 0; i < bpf_max_tramp_links; i++) { + if (i >= bpf_max_tramp_links) + i = bpf_max_tramp_links - 1; + while (i >= 0) { if (link_fd[i]) close(link_fd[i]); if (fexit_fd[i]) close(fexit_fd[i]); + i--; } free(fd); } -- 2.25.1

2 hours, 31 minutes

2
1
0 0

[PATCH] selftests/bpf: don't close(-1) in serial_test_fexit_stress()

by Ma Ke

Guard close() with extra link_fd[i] >= 0 and fexit_fd[i] >= 0 check to prevent close(-1). Signed-off-by: Ma Ke <make24(a)iscas.ac.cn> --- tools/testing/selftests/bpf/prog_tests/fexit_stress.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/fexit_stress.c b/tools/testing/selftests/bpf/prog_tests/fexit_stress.c index 596536def43d..94ff1d9fc9e4 100644 --- a/tools/testing/selftests/bpf/prog_tests/fexit_stress.c +++ b/tools/testing/selftests/bpf/prog_tests/fexit_stress.c @@ -50,9 +50,9 @@ void serial_test_fexit_stress(void) out: for (i = 0; i < bpf_max_tramp_links; i++) { - if (link_fd[i]) + if (link_fd[i] >= 0) close(link_fd[i]); - if (fexit_fd[i]) + if (fexit_fd[i] >= 0) close(fexit_fd[i]); } free(fd); -- 2.25.1

2 hours, 32 minutes

3
2
0 0

[PATCH] selftest: acct: Add selftest for the acct() syscall

by Abdulrasaq Lawani

Noticed that there was no selftest for the acct() syscall which enables the kernel to record terminated processes into a specified file. This patch provides a test for the acct() syscall. Signed-off-by: Abdulrasaq Lawani <abdulrasaqolawani(a)gmail.com> --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/acct/.gitignore | 2 + tools/testing/selftests/acct/Makefile | 4 ++ tools/testing/selftests/acct/acct_syscall.c | 60 +++++++++++++++++++++++++++++ 4 files changed, 67 insertions(+) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 9039f3709aff..45a58ef5ad92 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +TARGETS += acct TARGETS += alsa TARGETS += amd-pstate TARGETS += arm64 diff --git a/tools/testing/selftests/acct/.gitignore b/tools/testing/selftests/acct/.gitignore new file mode 100644 index 000000000000..8ab358d81bd2 --- /dev/null +++ b/tools/testing/selftests/acct/.gitignore @@ -0,0 +1,2 @@ +acct_syscall +config \ No newline at end of file diff --git a/tools/testing/selftests/acct/Makefile b/tools/testing/selftests/acct/Makefile new file mode 100644 index 000000000000..ff3e238c5634 --- /dev/null +++ b/tools/testing/selftests/acct/Makefile @@ -0,0 +1,4 @@ +TEST_GEN_PROGS := acct_syscall +CFLAGS += -Wall + +include ../lib.mk \ No newline at end of file diff --git a/tools/testing/selftests/acct/acct_syscall.c b/tools/testing/selftests/acct/acct_syscall.c new file mode 100644 index 000000000000..457b83937cac --- /dev/null +++ b/tools/testing/selftests/acct/acct_syscall.c @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0 + +// kselftest for acct() syscall + +// This tests the acct() syscall, which logs closed processes +// until deactivated or when criteria in /proc/sys/kernel/acct is met + +#include <stdio.h> +#include <unistd.h> +#include <errno.h> +#include <string.h> +#include <sys/wait.h> + +int main(void) +{ +// Create file to log closed processes +char filename[] = "process_log"; +FILE *fp; +fp = fopen(filename, "w"); + +int i = acct(filename); + +if (i) { + printf("Test Result: %s\n", strerror(errno)); + remove(filename); + fclose(fp); + return 1; +} + + // Create child process and wait to close +pid_t child_pid; + +child_pid = fork(); + +if (child_pid < 0) { + printf("Process failed\n"); + return 1; +} else if (child_pid == 0) { + printf("Child process successfully created!\n"); +} else { + wait(NULL); + fseek(fp, 0L, SEEK_END); + int sz = ftell(fp); + printf("Parent process successfully created!\n"); + + i = acct(NULL); + + if (sz <= 0) { + printf("Child process not logged"); + return 1; + } + + printf("Test Result: Successfully logged closed process.\n"); + remove(filename); + fclose(fp); + return 0; +} + +return 1; +} --- base-commit: 50736169ecc8387247fe6a00932852ce7b057083 change-id: 20240622-kselftest-acct-syscall-2d90f7666b1e Best regards, -- Abdulrasaq Lawani <abdulrasaqolawani(a)gmail.com>

3 hours, 34 minutes

2
1
0 0

[PATCH] selftests/resctrl: Fix noncont_cat_run_test for AMD

by Babu Moger

The selftest noncont_cat_run_test fails on AMD with the warnings. Reason is, AMD supports non contiguous CBM masks but does not report it via CPUID. Update noncont_cat_run_test to check for the vendor when verifying CPUID. Fixes: ae638551ab64 ("selftests/resctrl: Add non-contiguous CBMs CAT test") Signed-off-by: Babu Moger <babu.moger(a)amd.com> --- This was part of the series https://lore.kernel.org/lkml/cover.1708637563.git.babu.moger@amd.com/ Sending this as a separate fix per review comments. --- tools/testing/selftests/resctrl/cat_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/resctrl/cat_test.c b/tools/testing/selftests/resctrl/cat_test.c index d4dffc934bc3..b2988888786e 100644 --- a/tools/testing/selftests/resctrl/cat_test.c +++ b/tools/testing/selftests/resctrl/cat_test.c @@ -308,7 +308,7 @@ static int noncont_cat_run_test(const struct resctrl_test *test, else return -EINVAL; - if (sparse_masks != ((ecx >> 3) & 1)) { + if ((get_vendor() == ARCH_INTEL) && sparse_masks != ((ecx >> 3) & 1)) { ksft_print_msg("CPUID output doesn't match 'sparse_masks' file content!\n"); return 1; } -- 2.34.1

5 hours, 29 minutes

6
20
0 0

[PATCH] selftests/capabilities: Fix possible file leak in copy_fromat_to

by Ma Ke

The open() function returns -1 on error. openat() and open() initialize 'from' and 'to', and only 'from' validated with 'if' statement. If the initialization of variable 'to' fails, we should better check the value of 'to' and close 'from' to avoid possible file leak. Fixes: 32ae976ed3b5 ("selftests/capabilities: Add tests for capability evolution") Signed-off-by: Ma Ke <make24(a)iscas.ac.cn> --- Found this error through static analysis. --- tools/testing/selftests/capabilities/test_execve.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/testing/selftests/capabilities/test_execve.c b/tools/testing/selftests/capabilities/test_execve.c index 47bad7ddc5bc..de187eff177d 100644 --- a/tools/testing/selftests/capabilities/test_execve.c +++ b/tools/testing/selftests/capabilities/test_execve.c @@ -149,6 +149,10 @@ static void copy_fromat_to(int fromfd, const char *fromname, const char *toname) ksft_exit_fail_msg("open copy source - %s\n", strerror(errno)); int to = open(toname, O_CREAT | O_WRONLY | O_EXCL, 0700); + if (to == -1) { + close(from); + ksft_exit_fail_msg("open copy destination - %s\n", strerror(errno)); + } while (true) { char buf[4096]; -- 2.25.1

6 hours, 36 minutes

3
3
0 0

[PATCH net-next v3 0/7] selftests: net: Switch pmtu.sh to use the internal ovs script.

by Aaron Conole

Currently, if a user wants to run pmtu.sh and cover all the provided test cases, they need to install the Open vSwitch userspace utilities. This dependency is difficult for users as well as CI environments, because the userspace build and setup may require lots of support and devel packages to be installed, system setup to be correct, and things like permissions and selinux policies to be properly configured. The kernel selftest suite includes an ovs-dpctl.py utility which can interact with the openvswitch module directly. This lets developers and CI environments run without needing too many extra dependencies - just the pyroute2 python package. This series enhances the ovs-dpctl utility to provide support for set() and tunnel() flow specifiers, better ipv6 handling support, and the ability to add tunnel vports, and LWT interfaces. Finally, it modifies the pmtu.sh script to call the ovs-dpctl.py utility rather than the typical OVS userspace utilities. The pmtu.sh can still fall back on the Open vSwitch userspace utilities if the ovs-dpctl.py script can't be used. Aaron Conole (7): selftests: openvswitch: Support explicit tunnel port creation. selftests: openvswitch: Refactor actions parsing. selftests: openvswitch: Add set() and set_masked() support. selftests: openvswitch: Add support for tunnel() key. selftests: openvswitch: Support implicit ipv6 arguments. selftests: net: Use the provided dpctl rather than the vswitchd for tests. selftests: net: add config for openvswitch tools/testing/selftests/net/config | 5 + .../selftests/net/openvswitch/ovs-dpctl.py | 368 +++++++++++++++--- tools/testing/selftests/net/pmtu.sh | 145 +++++-- 3 files changed, 451 insertions(+), 67 deletions(-) -- 2.45.1

9 hours, 18 minutes

2
9
0 0

[PATCH v2 0/2] selftests/resctrl: SNC kernel support discovery

by Maciej Wieczor-Retman

Changes v2: - Removed patches 2 and 3 since now this part will be supported by the kernel. Sub-Numa Clustering (SNC) allows splitting CPU cores, caches and memory into multiple NUMA nodes. When enabled, NUMA-aware applications can achieve better performance on bigger server platforms. SNC support in the kernel is currently in review [1]. With SNC enabled and kernel support in place all the tests will function normally. There might be a problem when SNC is enabled but the system is still using an older kernel version without SNC support. Currently the only message displayed in that situation is a guess that SNC might be enabled and is causing issues. That message also is displayed whenever the test fails on an Intel platform. Add a mechanism to discover kernel support for SNC which will add more meaning and certainty to the error message. Series was tested on Ice Lake server platforms with SNC disabled, SNC-2 and SNC-4. The tests were also ran with and without kernel support for SNC. Series applies cleanly on kselftest/next. [1] https://lore.kernel.org/all/20240503203325.21512-1-tony.luck@intel.com/ Previous versions of this series: [v1] https://lore.kernel.org/all/cover.1709721159.git.maciej.wieczor-retman@inte… Maciej Wieczor-Retman (2): selftests/resctrl: Adjust effective L3 cache size with SNC enabled selftests/resctrl: Adjust SNC support messages tools/testing/selftests/resctrl/cat_test.c | 2 +- tools/testing/selftests/resctrl/cmt_test.c | 6 +- tools/testing/selftests/resctrl/mba_test.c | 2 + tools/testing/selftests/resctrl/mbm_test.c | 4 +- tools/testing/selftests/resctrl/resctrl.h | 8 +- tools/testing/selftests/resctrl/resctrlfs.c | 131 +++++++++++++++++++- 6 files changed, 144 insertions(+), 9 deletions(-) -- 2.45.0

9 hours, 27 minutes

3
15
0 0

[PATCH HID v2 00/13] HID: bpf_struct_ops, part 2

by Benjamin Tissoires

This series is a followup of the struct_ops conversion. Therefore, it is based on top of the for-6.11/bpf branch of the hid.git tree: https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git/log/?h=for-6.11… The first patch should go in ASAP, it's a fix that was detected by Dan and which is actually breaking some use cases. The rest is adding new capabilities to HID-BPF: being able to intercept hid_hw_raw_request() and hid_hw_ouptut_report(). Both operations are write operations to the device. Having those new hooks allows to implement the "firewall" of HID devices: this way a bpf program can selectively authorize an hidraw client to write or not to the device depending on what is requested. This also allows to completely emulate new behavior: we can now create a "fake" feature on a HID device, and when we receive a request on this feature, we can emulate the answer by either statically answering or even by communicating with the device from bpf, as those new hooks are sleepable. Last, there is one change in the kfunc hid_bpf_input_report, in which it actually waits for the device to be ready. This will not break any potential users as the function was already declared as sleepable. Cheers, Benjamin Signed-off-by: Benjamin Tissoires <bentiss(a)kernel.org> --- Changes in v2: - made use of srcu, for sleepable users - Link to v1: https://lore.kernel.org/r/20240621-hid_hw_req_bpf-v1-0-d7ab8b885a0b@kernel.… --- Benjamin Tissoires (13): HID: bpf: fix dispatch_hid_bpf_device_event uninitialized ret value HID: add source argument to HID low level functions HID: bpf: protect HID-BPF prog_list access by a SRCU HID: bpf: add HID-BPF hooks for hid_hw_raw_requests HID: bpf: prevent infinite recursions with hid_hw_raw_requests hooks selftests/hid: add tests for hid_hw_raw_request HID-BPF hooks HID: bpf: add HID-BPF hooks for hid_hw_output_report selftests/hid: add tests for hid_hw_output_report HID-BPF hooks HID: bpf: make hid_bpf_input_report() sleep until the device is ready selftests/hid: add wq test for hid_bpf_input_report() HID: bpf: allow hid_device_event hooks to inject input reports on self selftests/hid: add another test for injecting an event from an event hook selftests/hid: add an infinite loop test for hid_bpf_try_input_report Documentation/hid/hid-bpf.rst | 2 +- drivers/hid/bpf/hid_bpf_dispatch.c | 165 ++++++++++- drivers/hid/bpf/hid_bpf_dispatch.h | 1 + drivers/hid/bpf/hid_bpf_struct_ops.c | 6 +- drivers/hid/hid-core.c | 118 +++++--- drivers/hid/hidraw.c | 10 +- include/linux/hid.h | 7 + include/linux/hid_bpf.h | 80 ++++- tools/testing/selftests/hid/hid_bpf.c | 326 +++++++++++++++++++++ tools/testing/selftests/hid/progs/hid.c | 292 ++++++++++++++++++ .../testing/selftests/hid/progs/hid_bpf_helpers.h | 13 + 11 files changed, 955 insertions(+), 65 deletions(-) --- base-commit: 33c0fb85b571b0f1bbdbf466e770eebeb29e6f41 change-id: 20240614-hid_hw_req_bpf-df0b95aeb425 Best regards, -- Benjamin Tissoires <bentiss(a)kernel.org>

9 hours, 43 minutes

2
14
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror June 2024