Linux-kselftest-mirror August 2024

linux-kselftest-mirror@lists.linaro.org

215 participants
323 discussions

[PATCH net-next 4/6] selftests: router_mpath_nh: Test 16-bit next hop weights

by Petr Machata

Add tests that exercise full 16 bits of NH weight. To test the 255:65535, it is necessary to run more packets than for the other tests. On a debug kernel, the test can take up to a minute, therefore avoid the test when KSFT_MACHINE_SLOW. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> --- tools/testing/selftests/net/forwarding/lib.sh | 7 ++++ .../net/forwarding/router_mpath_nh.sh | 38 +++++++++++++++---- .../net/forwarding/router_mpath_nh_lib.sh | 13 +++++++ 3 files changed, 50 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index ff96bb7535ff..cb0fcd6f0293 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -509,6 +509,13 @@ xfail_on_slow() fi } +omit_on_slow() +{ + if [[ $KSFT_MACHINE_SLOW != yes ]]; then + "$@" + fi +} + xfail_on_veth() { local dev=$1; shift diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh index c5a30f8f55b5..a7d8399c8d4f 100755 --- a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh +++ b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh @@ -40,6 +40,7 @@ ALL_TESTS=" ping_ipv4 ping_ipv6 multipath_test + multipath16_test ping_ipv4_blackhole ping_ipv6_blackhole nh_stats_test_v4 @@ -226,9 +227,11 @@ routing_nh_obj() multipath4_test() { - local desc="$1" - local weight_rp12=$2 - local weight_rp13=$3 + local desc=$1; shift + local weight_rp12=$1; shift + local weight_rp13=$1; shift + local ports=${1-sp=1024,dp=0-32768}; shift + local t0_rp12 t0_rp13 t1_rp12 t1_rp13 local packets_rp12 packets_rp13 @@ -242,7 +245,7 @@ multipath4_test() t0_rp13=$(link_stats_tx_packets_get $rp13) ip vrf exec vrf-h1 $MZ $h1 -q -p 64 -A 192.0.2.2 -B 198.51.100.2 \ - -d $MZ_DELAY -t udp "sp=1024,dp=0-32768" + -d $MZ_DELAY -t udp "$ports" sleep 1 t1_rp12=$(link_stats_tx_packets_get $rp12) @@ -259,9 +262,11 @@ multipath4_test() multipath6_test() { - local desc="$1" - local weight_rp12=$2 - local weight_rp13=$3 + local desc=$1; shift + local weight_rp12=$1; shift + local weight_rp13=$1; shift + local ports=${1-sp=1024,dp=0-32768}; shift + local t0_rp12 t0_rp13 t1_rp12 t1_rp13 local packets_rp12 packets_rp13 @@ -276,7 +281,7 @@ multipath6_test() t0_rp13=$(link_stats_tx_packets_get $rp13) $MZ $h1 -6 -q -p 64 -A 2001:db8:1::2 -B 2001:db8:2::2 \ - -d $MZ_DELAY -t udp "sp=1024,dp=0-32768" + -d $MZ_DELAY -t udp "$ports" sleep 1 t1_rp12=$(link_stats_tx_packets_get $rp12) @@ -315,6 +320,23 @@ multipath_test() multipath6_test "Weighted MP 11:45" 11 45 } +multipath16_test() +{ + check_nhgw16 104 || return + + log_info "Running 16-bit IPv4 multipath tests" + multipath4_test "65535:65535" 65535 65535 + multipath4_test "128:512" 128 512 + omit_on_slow \ + multipath4_test "255:65535" 255 65535 sp=1024-1026,dp=0-65535 + + log_info "Running 16-bit IPv6 multipath tests" + multipath6_test "65535:65535" 65535 65535 + multipath6_test "128:512" 128 512 + omit_on_slow \ + multipath6_test "255:65535" 255 65535 sp=1024-1026,dp=0-65535 +} + ping_ipv4_blackhole() { RET=0 diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh_lib.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh_lib.sh index 2903294d8bca..507b2852dabe 100644 --- a/tools/testing/selftests/net/forwarding/router_mpath_nh_lib.sh +++ b/tools/testing/selftests/net/forwarding/router_mpath_nh_lib.sh @@ -117,3 +117,16 @@ __nh_stats_test_v6() $MZ -6 $h1 -A 2001:db8:1::2 -B 2001:db8:2::2 sysctl_restore net.ipv6.fib_multipath_hash_policy } + +check_nhgw16() +{ + local nhid=$1; shift + + ip nexthop replace id 9999 group "$nhid,65535" &>/dev/null + if (( $? )); then + log_test_skip "16-bit multipath tests" \ + "iproute2 or the kernel do not support 16-bit next hop weights" + return 1 + fi + ip nexthop del id 9999 ||: +} -- 2.45.0

8 months

[PATCH net-next 3/6] selftests: router_mpath: Sleep after MZ

by Petr Machata

In the context of an offloaded datapath, it may take a while for the ip link stats to be updated. This causes the test to fail when MZ_DELAY is too low. Sleep after the packets are sent for the link stats to get up to date. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> --- tools/testing/selftests/net/forwarding/router_mpath_nh.sh | 2 ++ tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh | 2 ++ tools/testing/selftests/net/forwarding/router_multipath.sh | 2 ++ 3 files changed, 6 insertions(+) diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh index 2ba44247c60a..c5a30f8f55b5 100755 --- a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh +++ b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh @@ -243,6 +243,7 @@ multipath4_test() ip vrf exec vrf-h1 $MZ $h1 -q -p 64 -A 192.0.2.2 -B 198.51.100.2 \ -d $MZ_DELAY -t udp "sp=1024,dp=0-32768" + sleep 1 t1_rp12=$(link_stats_tx_packets_get $rp12) t1_rp13=$(link_stats_tx_packets_get $rp13) @@ -276,6 +277,7 @@ multipath6_test() $MZ $h1 -6 -q -p 64 -A 2001:db8:1::2 -B 2001:db8:2::2 \ -d $MZ_DELAY -t udp "sp=1024,dp=0-32768" + sleep 1 t1_rp12=$(link_stats_tx_packets_get $rp12) t1_rp13=$(link_stats_tx_packets_get $rp13) diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh index cd9e346436fc..bd35fe8be9aa 100755 --- a/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh +++ b/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh @@ -244,6 +244,7 @@ multipath4_test() ip vrf exec vrf-h1 $MZ $h1 -q -p 64 -A 192.0.2.2 -B 198.51.100.2 \ -d $MZ_DELAY -t udp "sp=1024,dp=0-32768" + sleep 1 t1_rp12=$(link_stats_tx_packets_get $rp12) t1_rp13=$(link_stats_tx_packets_get $rp13) @@ -274,6 +275,7 @@ multipath6_l4_test() $MZ $h1 -6 -q -p 64 -A 2001:db8:1::2 -B 2001:db8:2::2 \ -d $MZ_DELAY -t udp "sp=1024,dp=0-32768" + sleep 1 t1_rp12=$(link_stats_tx_packets_get $rp12) t1_rp13=$(link_stats_tx_packets_get $rp13) diff --git a/tools/testing/selftests/net/forwarding/router_multipath.sh b/tools/testing/selftests/net/forwarding/router_multipath.sh index e2be354167a1..46f365b557b7 100755 --- a/tools/testing/selftests/net/forwarding/router_multipath.sh +++ b/tools/testing/selftests/net/forwarding/router_multipath.sh @@ -180,6 +180,7 @@ multipath4_test() ip vrf exec vrf-h1 $MZ $h1 -q -p 64 -A 192.0.2.2 -B 198.51.100.2 \ -d $MZ_DELAY -t udp "sp=1024,dp=0-32768" + sleep 1 t1_rp12=$(link_stats_tx_packets_get $rp12) t1_rp13=$(link_stats_tx_packets_get $rp13) @@ -217,6 +218,7 @@ multipath6_test() $MZ $h1 -6 -q -p 64 -A 2001:db8:1::2 -B 2001:db8:2::2 \ -d $MZ_DELAY -t udp "sp=1024,dp=0-32768" + sleep 1 t1_rp12=$(link_stats_tx_packets_get $rp12) t1_rp13=$(link_stats_tx_packets_get $rp13) -- 2.45.0

8 months

[PATCH v3 00/10] selftests: kvm: s390: Add s390x ucontrol selftests

by Christoph Schlameuss

This patch series adds a selftest suite to validate the s390x architecture specific ucontrol KVM interface. When creating a VM on s390x it is possible to create it as userspace controlled VM or in short ucontrol VM. These VMs delegates the management of the VM to userspace instead of handling most events within the kernel. Consequently the userspace has to manage interrupts, memory allocation etc. Before this patch set this functionality lacks any public test cases. It is desirable to add test cases for this interface to be able to reduce the risk of breaking changes in the future. In order to provision a ucontrol VM the kernel needs to be compiled with the CONFIG_KVM_S390_UCONTROL enabled. The users with sys_admin capability can then create a new ucontrol VM providing the KVM_VM_S390_UCONTROL parameter to the KVM_CREATE_VM ioctl. The kernels existing selftest helper functions can only be partially be reused for these tests. The test cases cover existing special handling of ucontrol VMs within the implementation and basic VM creation and handling cases: * Reject setting HPAGE when VM is ucontrol * Assert KVM_GET_DIRTY_LOG is rejected * Assert KVM_S390_VM_MEM_LIMIT_SIZE is rejected * Assert state of initial SIE flags setup by the kernel * Run simple program in VM with and without DAT * Assert KVM_EXIT_S390_UCONTROL exit on not mapped memory access * Assert functionality of storage keys in ucontrol VM Running the test cases requires sys_admin capabilities to start the ucontrol VM. This can be achieved by running as root or with a command like: sudo setpriv --reuid nobody --inh-caps -all,+sys_admin \ --ambient-caps -all,+sys_admin --bounding-set -all,+sys_admin \ ./ucontrol_test The patch set does also contain some code cleanup / consolidation of architecture specific defines that are now used in multiple test cases. --- V1 -> V2: - add ucontrol to s390 debug config (new patch) - PATCH 2: changed atomic_t to __u32 (thanks Claudio) - PATCH 4: reformatted comment in FIXTURE_SETUP(uc_kvm) - PATCH 5: refactored to display 8 byte blocks + more internal reuse (thanksClaudio) - PATCH 7: make use of more declarative defines instead of magic values - PATCH 8: make use of more declarative defines instead of magic values (thanks Claudio) - PATCH 9: add reference to fix verified by the test case V2 -> V3: - Remove stopped bit before starting the VM (no initial stop in multiple test cases) (thanks Janosch) - PATCH 2: - Clarified SIE control block vs SIE instruction (thanks Janosch) - PATCH 3: - Make use of CAP_TO_MASK(CAP_SYS_ADMIN) instead of custom define (thanks Janosch) - Removed Reviewed-By: Claudio - PATCH 4: - Remove erroneous 1MB offset from self->base_hva (thanks Janosch) - PATCH 6-8: Change name of test program _pgm to _asm to prevent confusion - PATCH 10: Move KVM_S390_UCONTROL default option to actual debug config (thanks Christian) Christoph Schlameuss (10): selftests: kvm: s390: Define page sizes in shared header selftests: kvm: s390: Add kvm_s390_sie_block definition for userspace tests selftests: kvm: s390: Add s390x ucontrol test suite with hpage test selftests: kvm: s390: Add test fixture and simple VM setup tests selftests: kvm: s390: Add debug print functions selftests: kvm: s390: Add VM run test case selftests: kvm: s390: Add uc_map_unmap VM test case selftests: kvm: s390: Add uc_skey VM test case selftests: kvm: s390: Verify reject memory region operations for ucontrol VMs s390: Enable KVM_S390_UCONTROL config in debug_defconfig arch/s390/configs/debug_defconfig | 1 + tools/testing/selftests/kvm/.gitignore | 1 + tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/include/s390x/debug_print.h | 69 ++ .../selftests/kvm/include/s390x/processor.h | 5 + .../testing/selftests/kvm/include/s390x/sie.h | 240 +++++++ .../selftests/kvm/lib/s390x/processor.c | 10 +- tools/testing/selftests/kvm/s390x/cmma_test.c | 7 +- tools/testing/selftests/kvm/s390x/config | 2 + .../testing/selftests/kvm/s390x/debug_test.c | 4 +- tools/testing/selftests/kvm/s390x/memop.c | 4 +- tools/testing/selftests/kvm/s390x/tprot.c | 5 +- .../selftests/kvm/s390x/ucontrol_test.c | 596 ++++++++++++++++++ 13 files changed, 929 insertions(+), 16 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/s390x/debug_print.h create mode 100644 tools/testing/selftests/kvm/include/s390x/sie.h create mode 100644 tools/testing/selftests/kvm/s390x/config create mode 100644 tools/testing/selftests/kvm/s390x/ucontrol_test.c base-commit: 94ede2a3e9135764736221c080ac7c0ad993dc2d -- 2.45.2

8 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror August 2024