Mending test for list_cut_position*() for the missing check of integer
"i" after the second loop. The variable should be checked for second
time to make sure both lists after the cut operation are formed as
expected.
Signed-off-by: I Hsin Cheng <richard120310(a)gmail.com>
---
lib/list-test.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/lib/list-test.c b/lib/list-test.c
index 37cbc33e9fdb..b4b3810c71d0 100644
--- a/lib/list-test.c
+++ b/lib/list-test.c
@@ -408,6 +408,8 @@ static void list_test_list_cut_position(struct kunit *test)
KUNIT_EXPECT_PTR_EQ(test, cur, &entries[i]);
i++;
}
+
+ KUNIT_EXPECT_EQ(test, i, 3);
}
static void list_test_list_cut_before(struct kunit *test)
@@ -436,6 +438,8 @@ static void list_test_list_cut_before(struct kunit *test)
KUNIT_EXPECT_PTR_EQ(test, cur, &entries[i]);
i++;
}
+
+ KUNIT_EXPECT_EQ(test, i, 3);
}
static void list_test_list_splice(struct kunit *test)
--
2.43.0
This patch series is motivated by the following observation:
Raise a signal, jump to signal handler. The ucontext_t structure dumped
by kernel to userspace has a uc_sigmask field having the mask of blocked
signals. If you run a fresh minimalistic program doing this, this field
is empty, even if you block some signals while registering the handler
with sigaction().
Here is what the man-pages have to say:
sigaction(2): "sa_mask specifies a mask of signals which should be blocked
(i.e., added to the signal mask of the thread in which the signal handler
is invoked) during execution of the signal handler. In addition, the
signal which triggered the handler will be blocked, unless the SA_NODEFER
flag is used."
signal(7): Under "Execution of signal handlers", (1.3) implies:
"The thread's current signal mask is accessible via the ucontext_t
object that is pointed to by the third argument of the signal handler."
But, (1.4) states:
"Any signals specified in act->sa_mask when registering the handler with
sigprocmask(2) are added to the thread's signal mask. The signal being
delivered is also added to the signal mask, unless SA_NODEFER was
specified when registering the handler. These signals are thus blocked
while the handler executes."
There clearly is no distinction being made in the man pages between
"Thread's signal mask" and ucontext_t; this logically should imply
that a signal blocked by populating struct sigaction should be visible
in ucontext_t.
Here is what the kernel code does (for Aarch64):
do_signal() -> handle_signal() -> sigmask_to_save(), which returns
¤t->blocked, is passed to setup_rt_frame() -> setup_sigframe() ->
__copy_to_user(). Hence, ¤t->blocked is copied to ucontext_t
exposed to userspace. Returning back to handle_signal(),
signal_setup_done() -> signal_delivered() -> sigorsets() and
set_current_blocked() are responsible for using information from
struct ksignal ksig, which was populated through the sigaction()
system call in kernel/signal.c:
copy_from_user(&new_sa.sa, act, sizeof(new_sa.sa)),
to update ¤t->blocked; hence, the set of blocked signals for the
current thread is updated AFTER the kernel dumps ucontext_t to
userspace.
Assuming that the above is indeed the intended behaviour, because it
semantically makes sense, since the signals blocked using sigaction()
remain blocked only till the execution of the handler, and not in the
context present before jumping to the handler (but nothing can be
confirmed from the man-pages), the series introduces a test for
mangling with uc_sigmask. I will send a separate series to fix the
man-pages.
The proposed selftest has been tested out on Aarch32, Aarch64 and x86_64.
v5->v6:
- Drop renaming of sas.c
- Include the explanation from the cover letter in the changelog
for the second patch
v4->v5:
- Remove a redundant print statement
v3->v4:
- Allocate sigsets as automatic variables to avoid malloc()
v2->v3:
- ucontext describes current state -> ucontext describes interrupted context
- Add a comment for blockage of USR2 even after return from handler
- Describe blockage of signals in a better way
v1->v2:
- Replace all occurrences of SIGPIPE with SIGSEGV
- Fixed a mismatch between code comment and ksft log
- Add a testcase: Raise the same signal again; it must not be queued
- Remove unneeded <assert.h>, <unistd.h>
- Give a detailed test description in the comments; also describe the
exact meaning of delivered and blocked
- Handle errors for all libc functions/syscalls
- Mention tests in Makefile and .gitignore in alphabetical order
v1:
- https://lore.kernel.org/all/20240607122319.768640-1-dev.jain@arm.com/
Dev Jain (2):
selftests: Rename sigaltstack to generic signal
selftests: Add a test mangling with uc_sigmask
tools/testing/selftests/Makefile | 2 +-
.../{sigaltstack => signal}/.gitignore | 1 +
.../{sigaltstack => signal}/Makefile | 3 +-
.../current_stack_pointer.h | 0
.../selftests/signal/mangle_uc_sigmask.c | 184 ++++++++++++++++++
.../selftests/{sigaltstack => signal}/sas.c | 0
6 files changed, 188 insertions(+), 2 deletions(-)
rename tools/testing/selftests/{sigaltstack => signal}/.gitignore (70%)
rename tools/testing/selftests/{sigaltstack => signal}/Makefile (56%)
rename tools/testing/selftests/{sigaltstack => signal}/current_stack_pointer.h (100%)
create mode 100644 tools/testing/selftests/signal/mangle_uc_sigmask.c
rename tools/testing/selftests/{sigaltstack => signal}/sas.c (100%)
--
2.30.2
Changes since V1:
- V1: https://lore.kernel.org/cover.1724970211.git.reinette.chatre@intel.com/
- V2 contains the same general solutions to stated problem as V1 but these
are now preceded by more fixes (patches 1 to 5) and improved robustness
(patches 6 to 9) to existing tests before the series gets back
to solving the original problem with more confidence in patches 10 to 13.
- The posibility of making "memflush = false" for CMT test was discussed
during V1. Modifying this setting does not have a significant impact on the
observed results that are already well within acceptable range and this
version thus keeps original default. If performance was a goal it may
be possible to do further experimentation where "memflush = false" could
eliminate the need for the sleep(1) within the test wrapper, but
improving the performance is not a goal of this work.
- (New) Support what seems to be unintended ability for user space to provide
parameters to "fill_buf" by making the parsing robust and only support
changing parameters that are supported to be changed. Drop support for
"write" operation since it has never been measured.
- (New) Improve wraparound handling. (Ilpo)
- (New) A couple of new fixes addressing issues discovered during development.
- (Change from V1) To support fill_buf parameters provided by user space as
well as test specific fill_buf parameters struct fill_buf_param is no longer
just a member of struct resctrl_val_param, instead there could be at most
two instances of struct fill_buf_param, the immutable parameters provided
by user space and the parameters used by individual tests. (Ilpo)
- Please see individual patches for detailed changes.
V1 cover:
The resctrl selftests for Memory Bandwidth Allocation (MBA) and Memory
Bandwidth Monitoring (MBM) are failing on some (for example [1]) Emerald
Rapids systems. The test failures result from the following two
properties of these systems:
1) Emerald Rapids systems can have up to 320MB L3 cache. The resctrl
MBA and MBM selftests measure memory traffic for which a hardcoded
250MB buffer has been sufficient so far. On platforms with L3 cache
larger than the buffer, the buffer fits in the L3 cache and thus
no/very little memory traffic is generated during the "memory
bandwidth" tests.
2) Some platform features, for example RAS features or memory
performance features that generate memory traffic may drive accesses
that are counted differently by performance counters and MBM
respectively, for instance generating "overhead" traffic which is not
counted against any specific RMID. Until now these counting
differences have always been "in the noise". On Emerald Rapids
systems the maximum MBA throttling (10% memory bandwidth)
throttles memory bandwidth to where memory accesses by these other
platform features push the memory bandwidth difference between
memory controller performance counters and resctrl (MBM) beyond the
tests' hardcoded tolerance.
Make the tests more robust against platform variations:
1) Let the buffer used by memory bandwidth tests be guided by the size
of the L3 cache.
2) Larger buffers require longer initialization time before the buffer can
be used to measurement. Rework the tests to ensure that buffer
initialization is complete before measurements start.
3) Do not compare performance counters and MBM measurements at low
bandwidth. The value of "low" is hardcoded to 750MiB based on
measurements on Emerald Rapids, Sapphire Rapids, and Ice Lake
systems. This limit is not applicable to AMD systems since it
only applies to the MBA and MBM tests that are isolated to Intel.
[1]
https://ark.intel.com/content/www/us/en/ark/products/237261/intel-xeon-plat…
Reinette Chatre (13):
selftests/resctrl: Make functions only used in same file static
selftests/resctrl: Print accurate buffer size as part of MBM results
selftests/resctrl: Fix memory overflow due to unhandled wraparound
selftests/resctrl: Protect against array overrun during iMC config
parsing
selftests/resctrl: Make wraparound handling obvious
selftests/resctrl: Remove "once" parameter required to be false
selftests/resctrl: Only support measured read operation
selftests/resctrl: Remove unused measurement code
selftests/resctrl: Make benchmark parameter passing robust
selftests/resctrl: Ensure measurements skip initialization of default
benchmark
selftests/resctrl: Use cache size to determine "fill_buf" buffer size
selftests/resctrl: Do not compare performance counters and resctrl at
low bandwidth
selftests/resctrl: Keep results from first test run
tools/testing/selftests/resctrl/cmt_test.c | 37 +-
tools/testing/selftests/resctrl/fill_buf.c | 40 +-
tools/testing/selftests/resctrl/mba_test.c | 52 +-
tools/testing/selftests/resctrl/mbm_test.c | 38 +-
tools/testing/selftests/resctrl/resctrl.h | 73 ++-
.../testing/selftests/resctrl/resctrl_tests.c | 95 +++-
tools/testing/selftests/resctrl/resctrl_val.c | 445 +++++-------------
tools/testing/selftests/resctrl/resctrlfs.c | 17 -
8 files changed, 339 insertions(+), 458 deletions(-)
--
2.46.0
Hi,
Here is the v5 patch to support polling on event 'hist' file.
The previous version is here;
https://lore.kernel.org/all/172377544331.67914.7474878424159759789.stgit@de…
This version just update the comment in poll.c and add Shuah's
Reviewed-by.
Background
----------
There has been interest in allowing user programs to monitor kernel
events in real time. Ftrace provides `trace_pipe` interface to wait
on events in the ring buffer, but it is needed to wait until filling
up a page with events in the ring buffer. We can also peek the
`trace` file periodically, but that is inefficient way to monitor
a randomely happening event.
Overview
--------
This patch set allows user to `poll`(or `select`, `epoll`) on event
histogram interface. As you know each event has its own `hist` file
which shows histograms generated by trigger action. So user can set
a new hist trigger on any event you want to monitor, and poll on the
`hist` file until it is updated.
There are 2 poll events are supported, POLLIN and POLLPRI. POLLIN
means that there are any readable update on `hist` file and this
event will be flashed only when you call read(). So, this is
useful if you want to read the histogram periodically.
The other POLLPRI event is for monitoring trace event. Like the
POLLIN, this will be returned when the histogram is updated, but
you don't need to read() the file and use poll() again.
Note that this waits for histogram update (not event arrival), thus
you must set a histogram on the event at first.
Usage
-----
Here is an example usage:
----
TRACEFS=/sys/kernel/tracing
EVENT=$TRACEFS/events/sched/sched_process_free
# setup histogram trigger and enable event
echo "hist:key=comm" >> $EVENT/trigger
echo 1 > $EVENT/enable
# Wait for update
poll pri $EVENT/hist
# Event arrived.
echo "process free event is comming"
tail $TRACEFS/trace
----
The 'poll' command is in the selftest patch.
You can take this series also from here;
https://git.kernel.org/pub/scm/linux/kernel/git/mhiramat/linux.git/log/?h=t…
Thank you,
---
Masami Hiramatsu (Google) (3):
tracing/hist: Add poll(POLLIN) support on hist file
tracing/hist: Support POLLPRI event for poll on histogram
selftests/tracing: Add hist poll() support test
include/linux/trace_events.h | 5 +
kernel/trace/trace_events.c | 18 ++++
kernel/trace/trace_events_hist.c | 101 +++++++++++++++++++-
tools/testing/selftests/ftrace/Makefile | 2
tools/testing/selftests/ftrace/poll.c | 74 +++++++++++++++
.../ftrace/test.d/trigger/trigger-hist-poll.tc | 74 +++++++++++++++
6 files changed, 271 insertions(+), 3 deletions(-)
create mode 100644 tools/testing/selftests/ftrace/poll.c
create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/trigger-hist-poll.tc
--
Masami Hiramatsu (Google) <mhiramat(a)kernel.org>
Hi
There is a long-standing problem whereby running Intel PT on host and guest
in Host/Guest mode, causes VM-Entry failure.
The motivation for this patch set is to provide a fix for stable kernels
prior to the advent of the "Mediated Passthrough vPMU" patch set:
https://lore.kernel.org/kvm/20240801045907.4010984-1-mizhang@google.com/
which would render a large part of the fix unnecessary but likely not be
suitable for backport to stable due to its size and complexity.
Ideally, this patch set would be applied before "Mediated Passthrough vPMU"
Note that the fix does not conflict with "Mediated Passthrough vPMU", it
is just that "Mediated Passthrough vPMU" will make the code to stop and
restart Intel PT unnecessary.
Adrian Hunter (3):
KVM: x86: Fix Intel PT IA32_RTIT_CTL MSR validation
KVM: x86: Fix Intel PT Host/Guest mode when host tracing also
KVM: selftests: Add guest Intel PT test
arch/x86/events/intel/pt.c | 131 ++++++-
arch/x86/events/intel/pt.h | 10 +
arch/x86/include/asm/intel_pt.h | 4 +
arch/x86/kvm/vmx/vmx.c | 26 +-
arch/x86/kvm/vmx/vmx.h | 1 -
tools/testing/selftests/kvm/Makefile | 1 +
.../selftests/kvm/include/x86_64/processor.h | 1 +
tools/testing/selftests/kvm/x86_64/intel_pt.c | 381 +++++++++++++++++++++
8 files changed, 532 insertions(+), 23 deletions(-)
create mode 100644 tools/testing/selftests/kvm/x86_64/intel_pt.c
base-commit: d45aab436cf06544abeeffc607110f559a3af3b4
Regards
Adrian
This series is a cherry-pick on top of v6.12-rc1 from the one I sent
for selftests with other patches that were not net-related:
https://lore.kernel.org/all/20240925-selftests-gitignore-v3-0-9db896474170@…
The patches have not been modified, and the Reviewed-by tags have
been kept.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz(a)gmail.com>
---
Javier Carrasco (3):
selftests: net: add msg_oob to gitignore
selftests: net: rds: add include.sh to EXTRA_CLEAN
selftests: net: rds: add gitignore file for include.sh
tools/testing/selftests/net/.gitignore | 1 +
tools/testing/selftests/net/rds/.gitignore | 1 +
tools/testing/selftests/net/rds/Makefile | 2 +-
3 files changed, 3 insertions(+), 1 deletion(-)
---
base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
change-id: 20240930-net-selftests-gitignore-18b844f29391
Best regards,
--
Javier Carrasco <javier.carrasco.cruz(a)gmail.com>
If MPLS is not available in the kernel then skip MPLS tests.
This avoids the test failing in situations where the test is not
supported by the underlying kernel.
In the case where all tests are run, just skip over the MPLS tests
without altering the exit code of the overall test run - there
is only one exit code in this scenario.
In the case where a single test is run, exit with KSFT_SKIP (4).
In both cases log an informative message.
Signed-off-by: Simon Horman <horms(a)kernel.org>
---
tools/testing/selftests/bpf/test_tc_tunnel.sh | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/test_tc_tunnel.sh b/tools/testing/selftests/bpf/test_tc_tunnel.sh
index 7989ec608454..71cddabc4ade 100755
--- a/tools/testing/selftests/bpf/test_tc_tunnel.sh
+++ b/tools/testing/selftests/bpf/test_tc_tunnel.sh
@@ -102,6 +102,20 @@ wait_for_port() {
return 1
}
+skip_mac() {
+ if [ "$1" = "mpls" ]; then
+ modprobe mpls_iptunnel || true
+ modprobe mpls_gso || true
+
+ if [ ! -e /proc/sys/net/mpls/platform_labels ]; then
+ echo -e "skip: mpls tunnel not supported by kernel\n"
+ return # true
+ fi
+ fi
+
+ false
+}
+
set -e
# no arguments: automated test, run all
@@ -125,6 +139,8 @@ if [[ "$#" -eq "0" ]]; then
$0 ipv6 ip6vxlan eth 2000
for mac in none mpls eth ; do
+ ! skip_mac "$mac" || continue
+
echo "ip gre $mac"
$0 ipv4 gre $mac 100
@@ -193,6 +209,10 @@ readonly tuntype=$2
readonly mac=$3
readonly datalen=$4
+if skip_mac "$mac"; then
+ exit 4 # KSFT_SKIP=4
+fi
+
echo "encap ${addr1} to ${addr2}, type ${tuntype}, mac ${mac} len ${datalen}"
trap cleanup EXIT
@@ -278,8 +298,6 @@ elif [[ "$tuntype" =~ (gre|vxlan) && "$mac" == "eth" ]]; then
awk '/ether/ { print $2 }')
ip netns exec "${ns2}" ip link set testtun0 address $ethaddr
elif [[ "$mac" == "mpls" ]]; then
- modprobe mpls_iptunnel ||true
- modprobe mpls_gso ||true
ip netns exec "${ns2}" sysctl -qw net.mpls.platform_labels=65536
ip netns exec "${ns2}" ip -f mpls route add 1000 dev lo
ip netns exec "${ns2}" ip link set lo up