February 2025 - Linux-kselftest-mirror

[PATCH v5 0/5] arm64: Support 2024 dpISA extensions

by Mark Brown

The 2024 architecture release includes a number of data processing extensions, mostly SVE and SME additions with a few others. These are all very straightforward extensions which add instructions but no architectural state so only need hwcaps and exposing of the ID registers to KVM guests and userspace. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v5: - Rebase onto arm64/for-next/cpufeature, which incorporates most of the sysreg updates from earlier versions. - Remove SF8MM8 and SF8MM4 register defintitions which were removed from the ISA in the 2024-12 XML release, along with their associated hwcaps. - Incorporate Marc's fix for SVE hwcaps on SME only systems and update the hwcaps for the newly added features to follow the same pattern. - Link to v4: https://lore.kernel.org/r/20241211-arm64-2024-dpisa-v4-0-0fd403876df2@kerne… Changes in v4: - Fix encodings for ID_AA64ISAR3_EL1. - Link to v3: https://lore.kernel.org/r/20241203-arm64-2024-dpisa-v3-0-a6c78b1aa297@kerne… Changes in v3: - Commit log update for the hwcap test. - Link to v2: https://lore.kernel.org/r/20241030-arm64-2024-dpisa-v2-0-b6601a15d2a5@kerne… Changes in v2: - Filter KVM guest visible bitfields in ID_AA64ISAR3_EL1 to only those we make writeable. - Link to v1: https://lore.kernel.org/r/20241028-arm64-2024-dpisa-v1-0-a38d08b008a8@kerne… --- Marc Zyngier (1): arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented Mark Brown (4): arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12 arm64/hwcap: Describe 2024 dpISA extensions to userspace KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1 kselftest/arm64: Add 2024 dpISA extensions to hwcap test Documentation/arch/arm64/elf_hwcaps.rst | 89 +++++++++-- arch/arm64/include/asm/hwcap.h | 15 ++ arch/arm64/include/uapi/asm/hwcap.h | 15 ++ arch/arm64/kernel/cpufeature.c | 71 +++++++-- arch/arm64/kernel/cpuinfo.c | 15 ++ arch/arm64/kvm/sys_regs.c | 6 +- arch/arm64/tools/sysreg | 26 +++- tools/testing/selftests/arm64/abi/hwcap.c | 235 +++++++++++++++++++++++++++++- 8 files changed, 441 insertions(+), 31 deletions(-) --- base-commit: d66e21d59ed0e043e68ef8c6541c1e9f1a962614 change-id: 20241008-arm64-2024-dpisa-8091074a7f48 Best regards, -- Mark Brown <broonie(a)kernel.org>

3 months

4
9
0 0

[PATCH net-next 4/4] selftests: test_vxlan_fdb_changelink: Add a test for MC remote change

by Petr Machata

Changes to MC remote need to be reflected in actual group memberships. Add a test to verify that it is the case. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> --- Notes: CC: Simon Horman <horms(a)kernel.org> CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org .../net/test_vxlan_fdb_changelink.sh | 76 +++++++++++++++++++ 1 file changed, 76 insertions(+) diff --git a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh index 6f2bca4b346c..062f957950af 100755 --- a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh +++ b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh @@ -3,6 +3,7 @@ ALL_TESTS=" test_set_remote + test_change_mc_remote " source lib.sh @@ -31,6 +32,81 @@ test_set_remote() log_test 'FDB default-remote handling across "ip link set"' } +fmt_remote() +{ + local addr=$1; shift + + if [[ $addr == 224.* ]]; then + echo "group $addr" + else + echo "remote $addr" + fi +} + +change_remote() +{ + local remote=$1; shift + + ip link set dev vx type vxlan $(fmt_remote $remote) dev v1 +} + +check_membership() +{ + local check_vec=("$@") + + local memberships + memberships=$( + netstat -n --groups | + sed -n '/^v1\b/p' | + grep -o '[^ ]*$' + ) + check_err $? "Couldn't obtain group memberships" + + local item + for item in "${check_vec[@]}"; do + eval "local $item" + echo "$memberships" | grep -q "\b$group\b" + check_err_fail $fail $? "$group is_ex reported in IGMP query response" + done +} + +test_change_mc_remote() +{ + check_command netstat || return + + ip_link_add v1 up type veth peer name v2 + ip_link_set_up v2 + + RET=0 + + ip_link_add vx up type vxlan dstport 4789 \ + local 192.0.2.1 $(fmt_remote 224.1.1.1) dev v1 vni 1000 + + check_membership "group=224.1.1.1 fail=0" \ + "group=224.1.1.2 fail=1" \ + "group=224.1.1.3 fail=1" + + log_test "MC group report after VXLAN creation" + + RET=0 + + change_remote 224.1.1.2 + check_membership "group=224.1.1.1 fail=1" \ + "group=224.1.1.2 fail=0" \ + "group=224.1.1.3 fail=1" + + log_test "MC group report after changing VXLAN remote MC->MC" + + RET=0 + + change_remote 192.0.2.2 + check_membership "group=224.1.1.1 fail=1" \ + "group=224.1.1.2 fail=1" \ + "group=224.1.1.3 fail=1" + + log_test "MC group report after changing VXLAN remote MC->UC" +} + trap defer_scopes_cleanup EXIT tests_run -- 2.47.0

3 months

1
0
0 0

[PATCH net-next 3/4] selftests: test_vxlan_fdb_changelink: Convert to lib.sh

by Petr Machata

Instead of inlining equivalents, use lib.sh-provided primitives. Use defer to manage vx lifetime. This will make it easier to extend the test in the next patch. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> --- Notes: CC: Simon Horman <horms(a)kernel.org> CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org .../net/test_vxlan_fdb_changelink.sh | 39 ++++++++++++------- 1 file changed, 24 insertions(+), 15 deletions(-) diff --git a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh index 2d442cdab11e..6f2bca4b346c 100755 --- a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh +++ b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh @@ -1,29 +1,38 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -# Check FDB default-remote handling across "ip link set". +ALL_TESTS=" + test_set_remote +" +source lib.sh check_remotes() { local what=$1; shift local N=$(bridge fdb sh dev vx | grep 00:00:00:00:00:00 | wc -l) - echo -ne "expected two remotes after $what\t" - if [[ $N != 2 ]]; then - echo "[FAIL]" - EXIT_STATUS=1 - else - echo "[ OK ]" - fi + ((N == 2)) + check_err $? "expected 2 remotes after $what, got $N" } -ip link add name vx up type vxlan id 2000 dstport 4789 -bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent -bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent -check_remotes "fdb append" +# Check FDB default-remote handling across "ip link set". +test_set_remote() +{ + RET=0 -ip link set dev vx type vxlan remote 192.0.2.30 -check_remotes "link set" + ip_link_add vx up type vxlan id 2000 dstport 4789 + bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent + bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent + check_remotes "fdb append" + + ip link set dev vx type vxlan remote 192.0.2.30 + check_remotes "link set" + + log_test 'FDB default-remote handling across "ip link set"' +} + +trap defer_scopes_cleanup EXIT + +tests_run -ip link del dev vx exit $EXIT_STATUS -- 2.47.0

3 months

1
0
0 0

[PATCH net-next 2/4] selftests: forwarding: lib: Move require_command to net, generalize

by Petr Machata

This helper could be useful to more than just forwarding tests. Move it upstairs and port over to log_test_skip(). Split the function into two parts: the bit that actually checks and reports skip, which is in a new function check_command(). And a bit that exits the test script if the check fails. This allows users consistent checking behavior while giving an option to bail out from a single test without bailing out of the whole script. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> --- Notes: CC: Simon Horman <horms(a)kernel.org> CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org tools/testing/selftests/net/forwarding/lib.sh | 10 ---------- tools/testing/selftests/net/lib.sh | 19 +++++++++++++++++++ 2 files changed, 19 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 8de80acf249e..508f3c700d71 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -291,16 +291,6 @@ if [[ "$CHECK_TC" = "yes" ]]; then check_tc_version fi -require_command() -{ - local cmd=$1; shift - - if [[ ! -x "$(command -v "$cmd")" ]]; then - echo "SKIP: $cmd not installed" - exit $ksft_skip - fi -} - # IPv6 support was added in v3.0 check_mtools_version() { diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index 0bd9a038a1f0..975be4fdbcdb 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -450,6 +450,25 @@ kill_process() { kill $pid && wait $pid; } 2>/dev/null } +check_command() +{ + local cmd=$1; shift + + if [[ ! -x "$(command -v "$cmd")" ]]; then + log_test_skip "$cmd not installed" + return $EXIT_STATUS + fi +} + +require_command() +{ + local cmd=$1; shift + + if ! check_command "$cmd"; then + exit $EXIT_STATUS + fi +} + ip_link_add() { local name=$1; shift -- 2.47.0

3 months

1
0
0 0

[PATCH] selftests: net: fix grammar in reuseaddr_ports_exhausted.c log message

by Pranav Tyagi

This patch fixes a grammatical error in a test log message in reuseaddr_ports_exhausted.c for better clarity as a part of lfx application tasks Signed-off-by: Pranav Tyagi <pranav.tyagi03(a)gmail.com> --- tools/testing/selftests/net/reuseaddr_ports_exhausted.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/reuseaddr_ports_exhausted.c b/tools/testing/selftests/net/reuseaddr_ports_exhausted.c index 066efd30e294..7b9bf8a7bbe1 100644 --- a/tools/testing/selftests/net/reuseaddr_ports_exhausted.c +++ b/tools/testing/selftests/net/reuseaddr_ports_exhausted.c @@ -112,7 +112,7 @@ TEST(reuseaddr_ports_exhausted_reusable_same_euid) ASSERT_NE(-1, fd[0]) TH_LOG("failed to bind."); if (opts->reuseport[0] && opts->reuseport[1]) { - EXPECT_EQ(-1, fd[1]) TH_LOG("should fail to bind because both sockets succeed to be listened."); + EXPECT_EQ(-1, fd[1]) TH_LOG("should fail to bind because both sockets successfully listened."); } else { EXPECT_NE(-1, fd[1]) TH_LOG("should succeed to bind to connect to different destinations."); } -- 2.47.1

3 months

1
0
0 0

[PATCH v6 0/7] Buddy allocator like (or non-uniform) folio split

by Zi Yan

Hi all, This patchset adds a new buddy allocator like (or non-uniform) large folio split to reduce the total number of after-split folios, the amount of memory needed for multi-index xarray split, and keep more large folios after a split. It is on top of mm-everything-2025-02-01-05-58. It is ready to be merged. Instead of duplicating existing split_huge_page*() code, __folio_split() is introduced as the shared backend code for both split_huge_page_to_list_to_order() and folio_split(). __folio_split() can support both uniform split and buddy allocator like (or non-uniform) split. All existing split_huge_page*() users can be gradually converted to use folio_split() if possible. In this patchset, I converted truncate_inode_partial_folio() to use folio_split(). xfstests quick group passed for both tmpfs and xfs. Changelog === From V5[7]: 1. Split shmem to any lower order patches are in mm tree, so dropped from this series. 2. Rename split_folio_at() to try_folio_split() to clarify that non-uniform split will not be used if it is not supported. From V4[6]: 1. Enabled shmem support in both uniform and buddy allocator like split and added selftests for it. 2. Added functions to check if uniform split and buddy allocator like split are supported for the given folio and order. 3. Made truncate fall back to uniform split if buddy allocator split is not supported (CONFIG_READ_ONLY_THP_FOR_FS and FS without large folio). 4. Added the missing folio_clear_has_hwpoisoned() to __split_unmapped_folio(). From V3[5]: 1. Used xas_split_alloc(GFP_NOWAIT) instead of xas_nomem(), since extra operations inside xas_split_alloc() are needed for correctness. 2. Enabled folio_split() for shmem and no issue was found with xfstests quick test group. 3. Split both ends of a truncate range in truncate_inode_partial_folio() to avoid wasting memory in shmem truncate (per David Hildenbrand). 4. Removed page_in_folio_offset() since page_folio() does the same thing. 5. Finished truncate related tests from xfstests quick test group on XFS and tmpfs without issues. 6. Disabled buddy allocator like split on CONFIG_READ_ONLY_THP_FOR_FS and FS without large folio. This check was missed in the prior versions. From V2[3]: 1. Incorporated all the feedback from Kirill[4]. 2. Used GFP_NOWAIT for xas_nomem(). 3. Tested the code path when xas_nomem() fails. 4. Added selftests for folio_split(). 5. Fixed no THP config build error. From V1[2]: 1. Split the original patch 1 into multiple ones for easy review (per Kirill). 2. Added xas_destroy() to avoid memory leak. 3. Fixed nr_dropped not used error (per kernel test robot). 4. Added proper error handling when xas_nomem() fails to allocate memory for xas_split() during buddy allocator like split. From RFC[1]: 1. Merged backend code of split_huge_page_to_list_to_order() and folio_split(). The same code is used for both uniform split and buddy allocator like split. 2. Use xas_nomem() instead of xas_split_alloc() for folio_split(). 3. folio_split() now leaves the first after-split folio unlocked, instead of the one containing the given page, since the caller of truncate_inode_partial_folio() locks and unlocks the first folio. 4. Extended split_huge_page debugfs to use folio_split(). 5. Added truncate_inode_partial_folio() as first user of folio_split(). Design === folio_split() splits a large folio in the same way as buddy allocator splits a large free page for allocation. The purpose is to minimize the number of folios after the split. For example, if user wants to free the 3rd subpage in a order-9 folio, folio_split() will split the order-9 folio as: O-0, O-0, O-0, O-0, O-2, O-3, O-4, O-5, O-6, O-7, O-8 if it is anon O-1, O-0, O-0, O-2, O-3, O-4, O-5, O-6, O-7, O-9 if it is pagecache Since anon folio does not support order-1 yet. The split process is similar to existing approach: 1. Unmap all page mappings (split PMD mappings if exist); 2. Split meta data like memcg, page owner, page alloc tag; 3. Copy meta data in struct folio to sub pages, but instead of spliting the whole folio into multiple smaller ones with the same order in a shot, this approach splits the folio iteratively. Taking the example above, this approach first splits the original order-9 into two order-8, then splits left part of order-8 to two order-7 and so on; 4. Post-process split folios, like write mapping->i_pages for pagecache, adjust folio refcounts, add split folios to corresponding list; 5. Remap split folios 6. Unlock split folios. __split_unmapped_folio() and __split_folio_to_order() replace __split_huge_page() and __split_huge_page_tail() respectively. __split_unmapped_folio() uses different approaches to perform uniform split and buddy allocator like split: 1. uniform split: one single call to __split_folio_to_order() is used to uniformly split the given folio. All resulting folios are put back to the list after split. The folio containing the given page is left to caller to unlock and others are unlocked. 2. buddy allocator like (or non-uniform) split: (old_order - new_order) calls to __split_folio_to_order() are used to split the given folio at order N to order N-1. After each call, the target folio is changed to the one containing the page, which is given as a folio_split() parameter. After each call, folios not containing the page are put back to the list. The folio containing the page is put back to the list when its order is new_order. All folios are unlocked except the first folio, which is left to caller to unlock. Patch Overview === 1. Patch 1 added __split_unmapped_folio() and __split_folio_to_order() to prepare for moving to new backend split code. 2. Patch 2 moved common code in split_huge_page_to_list_to_order() to __folio_split(). 3. Patch 3 added new folio_split() and made split_huge_page_to_list_to_order() share the new __split_unmapped_folio() with folio_split(). 4. Patch 4 removed no longer used __split_huge_page() and __split_huge_page_tail(). 5. Patch 5 added a new in_folio_offset to split_huge_page debugfs for folio_split() test. 6. Patch 6 used try_folio_split() for truncate operation. 7. Patch 7 added folio_split() tests. Any comments and/or suggestions are welcome. Thanks. [1] https://lore.kernel.org/linux-mm/20241008223748.555845-1-ziy@nvidia.com/ [2] https://lore.kernel.org/linux-mm/20241028180932.1319265-1-ziy@nvidia.com/ [3] https://lore.kernel.org/linux-mm/20241101150357.1752726-1-ziy@nvidia.com/ [4] https://lore.kernel.org/linux-mm/e6ppwz5t4p4kvir6eqzoto4y5fmdjdxdyvxvtw43nc… [5] https://lore.kernel.org/linux-mm/20241205001839.2582020-1-ziy@nvidia.com/ [6] https://lore.kernel.org/linux-mm/20250106165513.104899-1-ziy@nvidia.com/ [7] https://lore.kernel.org/linux-mm/20250116211042.741543-1-ziy@nvidia.com/ Zi Yan (7): mm/huge_memory: add two new (not yet used) functions for folio_split() mm/huge_memory: move folio split common code to __folio_split() mm/huge_memory: add buddy allocator like folio_split() mm/huge_memory: remove the old, unused __split_huge_page() mm/huge_memory: add folio_split() to debugfs testing interface. mm/truncate: use buddy allocator like folio split for truncate operation. selftests/mm: add tests for folio_split(), buddy allocator like split. include/linux/huge_mm.h | 36 + mm/huge_memory.c | 749 ++++++++++++------ mm/truncate.c | 31 +- .../selftests/mm/split_huge_page_test.c | 34 +- 4 files changed, 582 insertions(+), 268 deletions(-) -- 2.47.2

3 months

3
12
0 0

[PATCH v4 0/2] scanf: convert self-test to KUnit

by Tamir Duberstein

This is one of just 3 remaining "Test Module" kselftests (the others being bitmap and printf), the rest having been converted to KUnit. In addition to the enclosed patch, please consider this an RFC on the removal of the "Test Module" kselftest machinery. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 scanf Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v4: - Bake `test` into various macros, greatly reducing diff noise. - Revert control flow changes. - Link to v3: https://lore.kernel.org/r/20250204-scanf-kunit-convert-v3-0-386d7c3ee714@gm… Changes in v3: - Reduce diff noise in lib/Makefile. (Petr Mladek) - Split `scanf_test` into a few test cases. New output: : =================== scanf (10 subtests) ==================== : [PASSED] numbers_simple : ====================== numbers_list ======================= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ================== [PASSED] numbers_list =================== : ============ numbers_list_field_width_typemax ============= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======== [PASSED] numbers_list_field_width_typemax ========= : =========== numbers_list_field_width_val_width ============ : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======= [PASSED] numbers_list_field_width_val_width ======== : [PASSED] numbers_slice : [PASSED] numbers_prefix_overflow : [PASSED] test_simple_strtoull : [PASSED] test_simple_strtoll : [PASSED] test_simple_strtoul : [PASSED] test_simple_strtol : ====================== [PASSED] scanf ====================== : ============================================================ : Testing complete. Ran 22 tests: passed: 22 : Elapsed time: 5.517s total, 0.001s configuring, 5.440s building, 0.067s running - Link to v2: https://lore.kernel.org/r/20250203-scanf-kunit-convert-v2-1-277a618d804e@gm… Changes in v2: - Rename lib/{test_scanf.c => scanf_kunit.c}. (Andy Shevchenko) - Link to v1: https://lore.kernel.org/r/20250131-scanf-kunit-convert-v1-1-0976524f0eba@gm… --- Tamir Duberstein (2): scanf: convert self-test to KUnit scanf: break kunit into test cases MAINTAINERS | 2 +- arch/m68k/configs/amiga_defconfig | 1 - arch/m68k/configs/apollo_defconfig | 1 - arch/m68k/configs/atari_defconfig | 1 - arch/m68k/configs/bvme6000_defconfig | 1 - arch/m68k/configs/hp300_defconfig | 1 - arch/m68k/configs/mac_defconfig | 1 - arch/m68k/configs/multi_defconfig | 1 - arch/m68k/configs/mvme147_defconfig | 1 - arch/m68k/configs/mvme16x_defconfig | 1 - arch/m68k/configs/q40_defconfig | 1 - arch/m68k/configs/sun3_defconfig | 1 - arch/m68k/configs/sun3x_defconfig | 1 - arch/powerpc/configs/ppc64_defconfig | 1 - lib/Kconfig.debug | 20 ++- lib/Makefile | 2 +- lib/{test_scanf.c => scanf_kunit.c} | 260 +++++++++++++++++------------------ tools/testing/selftests/lib/Makefile | 2 +- tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/scanf.sh | 4 - 20 files changed, 149 insertions(+), 155 deletions(-) --- base-commit: a86bf2283d2c9769205407e2b54777c03d012939 change-id: 20250131-scanf-kunit-convert-f70dc33bb34c Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

3 months

1
3
0 0

[PATCH net-next v18 00/25] Introducing OpenVPN Data Channel Offload

by Antonio Quartulli

Notable changes since v17: * fixed netdevice_tracker pointer assignment in netlink post_doit (triggered by kernel test robot on m86k) * renamed nla_get_uint() to ovpn_nla_get_uint() in ovpn-cli.c to avoid clashes with libnl-3.11.0 FTR, here are the notable changes since v16: * fixed usage of netdev tracker by removing dev_tracker member from ovpn_priv and adding it to ovpn_peer and ovpn_socket as those are the objects really holding a ref to the netdev * switched ovpn_get_dev_from_attrs() to GFP_ATOMIC to prevent sleep under rcu_read_lock * allocated netdevice_tracker in ovpn_nl_pre_doit() [stored in user_ptr[1]] to keep track of the netdev reference held during netlink handler calls * moved whole socket detaching routine to worker. This way the code is allowed to sleep and in turn it can be executed under lock_sock. This lock allows us to happily coordinate concurrent attach/detach calls. (note: lock is acquired everytime the refcnt for the socket is decremented, because this guarantees us that setting the refcnt to 0 and detaching the socket will happen atomically) * dropped kref_put_sock()/refcount handler as it's not required anymore, thanks to the point above * re-arranged ovpn_socket_new() in order to simplify error path by first allocating the new ovpn_sock and then attaching Please note that some patches were already reviewed/tested by a few people. iThese patches have retained the tags as they have hardly been touched. The latest code can also be found at: https://github.com/OpenVPN/linux-kernel-ovpn Thanks a lot! Best Regards, Antonio Quartulli OpenVPN Inc. --- Antonio Quartulli (25): net: introduce OpenVPN Data Channel Offload (ovpn) ovpn: add basic netlink support ovpn: add basic interface creation/destruction/management routines ovpn: keep carrier always on for MP interfaces ovpn: introduce the ovpn_peer object ovpn: introduce the ovpn_socket object ovpn: implement basic TX path (UDP) ovpn: implement basic RX path (UDP) ovpn: implement packet processing ovpn: store tunnel and transport statistics ipv6: export inet6_stream_ops via EXPORT_SYMBOL_GPL ovpn: implement TCP transport skb: implement skb_send_sock_locked_with_flags() ovpn: add support for MSG_NOSIGNAL in tcp_sendmsg ovpn: implement multi-peer support ovpn: implement peer lookup logic ovpn: implement keepalive mechanism ovpn: add support for updating local UDP endpoint ovpn: add support for peer floating ovpn: implement peer add/get/dump/delete via netlink ovpn: implement key add/get/del/swap via netlink ovpn: kill key and notify userspace in case of IV exhaustion ovpn: notify userspace when a peer is deleted ovpn: add basic ethtool support testing/selftests: add test tool and scripts for ovpn module Documentation/netlink/specs/ovpn.yaml | 372 +++ Documentation/netlink/specs/rt_link.yaml | 16 + MAINTAINERS | 11 + drivers/net/Kconfig | 15 + drivers/net/Makefile | 1 + drivers/net/ovpn/Makefile | 22 + drivers/net/ovpn/bind.c | 55 + drivers/net/ovpn/bind.h | 101 + drivers/net/ovpn/crypto.c | 211 ++ drivers/net/ovpn/crypto.h | 145 ++ drivers/net/ovpn/crypto_aead.c | 382 ++++ drivers/net/ovpn/crypto_aead.h | 33 + drivers/net/ovpn/io.c | 446 ++++ drivers/net/ovpn/io.h | 34 + drivers/net/ovpn/main.c | 350 +++ drivers/net/ovpn/main.h | 14 + drivers/net/ovpn/netlink-gen.c | 213 ++ drivers/net/ovpn/netlink-gen.h | 41 + drivers/net/ovpn/netlink.c | 1183 ++++++++++ drivers/net/ovpn/netlink.h | 18 + drivers/net/ovpn/ovpnstruct.h | 54 + drivers/net/ovpn/peer.c | 1269 +++++++++++ drivers/net/ovpn/peer.h | 164 ++ drivers/net/ovpn/pktid.c | 129 ++ drivers/net/ovpn/pktid.h | 87 + drivers/net/ovpn/proto.h | 118 + drivers/net/ovpn/skb.h | 60 + drivers/net/ovpn/socket.c | 204 ++ drivers/net/ovpn/socket.h | 49 + drivers/net/ovpn/stats.c | 21 + drivers/net/ovpn/stats.h | 47 + drivers/net/ovpn/tcp.c | 565 +++++ drivers/net/ovpn/tcp.h | 33 + drivers/net/ovpn/udp.c | 421 ++++ drivers/net/ovpn/udp.h | 22 + include/linux/skbuff.h | 2 + include/uapi/linux/if_link.h | 15 + include/uapi/linux/ovpn.h | 111 + include/uapi/linux/udp.h | 1 + net/core/skbuff.c | 18 +- net/ipv6/af_inet6.c | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/net/ovpn/.gitignore | 2 + tools/testing/selftests/net/ovpn/Makefile | 17 + tools/testing/selftests/net/ovpn/config | 10 + tools/testing/selftests/net/ovpn/data64.key | 5 + tools/testing/selftests/net/ovpn/ovpn-cli.c | 2367 ++++++++++++++++++++ tools/testing/selftests/net/ovpn/tcp_peers.txt | 5 + .../testing/selftests/net/ovpn/test-chachapoly.sh | 9 + tools/testing/selftests/net/ovpn/test-float.sh | 9 + tools/testing/selftests/net/ovpn/test-tcp.sh | 9 + tools/testing/selftests/net/ovpn/test.sh | 185 ++ tools/testing/selftests/net/ovpn/udp_peers.txt | 5 + 53 files changed, 9673 insertions(+), 5 deletions(-) --- base-commit: 7d0da8f862340c5f42f0062b8560b8d0971a6ac4 change-id: 20241002-b4-ovpn-eeee35c694a2 Best regards, -- Antonio Quartulli <antonio(a)openvpn.net>

3 months

3
70
0 0

[PATCHv2 net 0/2] bonding: fix incorrect mac address setting

by Hangbin Liu

The mac address on backup slave should be convert from Solicited-Node Multicast address, not from bonding unicast target address. v2: fix patch 01's subject Hangbin Liu (2): bonding: fix incorrect MAC address setting to receive NS messages selftests: bonding: fix incorrect mac address drivers/net/bonding/bond_options.c | 4 +++- tools/testing/selftests/drivers/net/bonding/bond_options.sh | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) -- 2.46.0

3 months

2
4
0 0

[PATCH bpf-next v1] selftests/bpf: correct the check of join cgroup

by Jason Xing

Use ASSERT_OK_FD to check the return value of join cgroup, or else this test will pass even if the fd < 0. ASSERT_OK_FD can print the error message to the console. Link: https://lore.kernel.org/all/6d62bd77-6733-40c7-b240-a1aeff55566c@linux.dev/ Suggested-by: Martin KaFai Lau <martin.lau(a)kernel.org> Signed-off-by: Jason Xing <kerneljasonxing(a)gmail.com> --- tools/testing/selftests/bpf/prog_tests/setget_sockopt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/setget_sockopt.c b/tools/testing/selftests/bpf/prog_tests/setget_sockopt.c index e12255121c15..e4dac529d424 100644 --- a/tools/testing/selftests/bpf/prog_tests/setget_sockopt.c +++ b/tools/testing/selftests/bpf/prog_tests/setget_sockopt.c @@ -202,7 +202,7 @@ static void test_nonstandard_opt(int family) void test_setget_sockopt(void) { cg_fd = test__join_cgroup(CG_NAME); - if (cg_fd < 0) + if (!ASSERT_OK_FD(cg_fd, "join cgroup")) return; if (create_netns()) -- 2.43.5

3 months

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror February 2025