March 2025 - Linux-kselftest-mirror

[PATCH net-next] selftests: net: bump GRO timeout for gro/setup_veth

by Jakub Kicinski

Commit 51bef03e1a71 ("selftests/net: deflake GRO tests") recently switched to NAPI suspension, and lowered the timeout from 1ms to 100us. This started causing flakes in netdev-run CI. Let's bump it to 200us. In a quick test of a debug kernel I see failures with 100us, with 200us in 5 runs I see 2 completely clean runs and 3 with a single retry (GRO test will retry up to 5 times). Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: krakauer(a)google.com CC: willemb(a)google.com CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/setup_veth.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/setup_veth.sh b/tools/testing/selftests/net/setup_veth.sh index eb3182066d12..152bf4c65747 100644 --- a/tools/testing/selftests/net/setup_veth.sh +++ b/tools/testing/selftests/net/setup_veth.sh @@ -11,7 +11,7 @@ setup_veth_ns() { local -r ns_mac="$4" [[ -e /var/run/netns/"${ns_name}" ]] || ip netns add "${ns_name}" - echo 100000 > "/sys/class/net/${ns_dev}/gro_flush_timeout" + echo 200000 > "/sys/class/net/${ns_dev}/gro_flush_timeout" echo 1 > "/sys/class/net/${ns_dev}/napi_defer_hard_irqs" ip link set dev "${ns_dev}" netns "${ns_name}" mtu 65535 ip -netns "${ns_name}" link set dev "${ns_dev}" up -- 2.48.1

1 month, 1 week

3
2
0 0

[PATCH net-next v22 00/23] Introducing OpenVPN Data Channel Offload

by Antonio Quartulli

Notable changes since v21: * accessed crypto_slot->primary_idx via READ/WRITE_ONCE * made ovpn_aead_init() static * converted link tx/rx packet counters from u32 to to uint * ensured all u32 NL attributes are read by nla_get_u32() * ensured all u32 NL attrivutes are written by nla_put_u32() * reset cache upon float or local endpoint change * dropped check for delta > 0 in keepalive worker scheduling * improved comments in update endpoints logic * converted local_ip to void* to avoid useless casts Please note that some patches were already reviewed/tested by a few people. These patches have retained the tags as they have hardly been touched. The latest code can also be found at: https://github.com/OpenVPN/ovpn-net-next Thanks a lot! Best Regards, Antonio Quartulli OpenVPN Inc. --- Changes in v21: - EDITME: describe what is new in this series revision. - EDITME: use bulletpoints and terse descriptions. - Link to v20: https://lore.kernel.org/r/20250227-b4-ovpn-v20-0-93f363310834@openvpn.net --- Antonio Quartulli (23): net: introduce OpenVPN Data Channel Offload (ovpn) ovpn: add basic netlink support ovpn: add basic interface creation/destruction/management routines ovpn: keep carrier always on for MP interfaces ovpn: introduce the ovpn_peer object ovpn: introduce the ovpn_socket object ovpn: implement basic TX path (UDP) ovpn: implement basic RX path (UDP) ovpn: implement packet processing ovpn: store tunnel and transport statistics ovpn: implement TCP transport skb: implement skb_send_sock_locked_with_flags() ovpn: add support for MSG_NOSIGNAL in tcp_sendmsg ovpn: implement multi-peer support ovpn: implement peer lookup logic ovpn: implement keepalive mechanism ovpn: add support for updating local or remote UDP endpoint ovpn: implement peer add/get/dump/delete via netlink ovpn: implement key add/get/del/swap via netlink ovpn: kill key and notify userspace in case of IV exhaustion ovpn: notify userspace when a peer is deleted ovpn: add basic ethtool support testing/selftests: add test tool and scripts for ovpn module Documentation/netlink/specs/ovpn.yaml | 367 +++ Documentation/netlink/specs/rt_link.yaml | 16 + MAINTAINERS | 11 + drivers/net/Kconfig | 15 + drivers/net/Makefile | 1 + drivers/net/ovpn/Makefile | 22 + drivers/net/ovpn/bind.c | 55 + drivers/net/ovpn/bind.h | 101 + drivers/net/ovpn/crypto.c | 211 ++ drivers/net/ovpn/crypto.h | 145 ++ drivers/net/ovpn/crypto_aead.c | 409 ++++ drivers/net/ovpn/crypto_aead.h | 29 + drivers/net/ovpn/io.c | 462 ++++ drivers/net/ovpn/io.h | 34 + drivers/net/ovpn/main.c | 339 +++ drivers/net/ovpn/main.h | 14 + drivers/net/ovpn/netlink-gen.c | 213 ++ drivers/net/ovpn/netlink-gen.h | 41 + drivers/net/ovpn/netlink.c | 1249 ++++++++++ drivers/net/ovpn/netlink.h | 18 + drivers/net/ovpn/ovpnpriv.h | 57 + drivers/net/ovpn/peer.c | 1367 +++++++++++ drivers/net/ovpn/peer.h | 163 ++ drivers/net/ovpn/pktid.c | 129 ++ drivers/net/ovpn/pktid.h | 87 + drivers/net/ovpn/proto.h | 118 + drivers/net/ovpn/skb.h | 61 + drivers/net/ovpn/socket.c | 244 ++ drivers/net/ovpn/socket.h | 49 + drivers/net/ovpn/stats.c | 21 + drivers/net/ovpn/stats.h | 47 + drivers/net/ovpn/tcp.c | 592 +++++ drivers/net/ovpn/tcp.h | 36 + drivers/net/ovpn/udp.c | 442 ++++ drivers/net/ovpn/udp.h | 25 + include/linux/skbuff.h | 2 + include/uapi/linux/if_link.h | 15 + include/uapi/linux/ovpn.h | 109 + include/uapi/linux/udp.h | 1 + net/core/skbuff.c | 18 +- net/ipv6/af_inet6.c | 1 + net/ipv6/udp.c | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/net/ovpn/.gitignore | 2 + tools/testing/selftests/net/ovpn/Makefile | 31 + tools/testing/selftests/net/ovpn/common.sh | 92 + tools/testing/selftests/net/ovpn/config | 10 + tools/testing/selftests/net/ovpn/data64.key | 5 + tools/testing/selftests/net/ovpn/ovpn-cli.c | 2395 ++++++++++++++++++++ tools/testing/selftests/net/ovpn/tcp_peers.txt | 5 + .../testing/selftests/net/ovpn/test-chachapoly.sh | 9 + .../selftests/net/ovpn/test-close-socket-tcp.sh | 9 + .../selftests/net/ovpn/test-close-socket.sh | 45 + tools/testing/selftests/net/ovpn/test-float.sh | 9 + tools/testing/selftests/net/ovpn/test-tcp.sh | 9 + tools/testing/selftests/net/ovpn/test.sh | 113 + tools/testing/selftests/net/ovpn/udp_peers.txt | 5 + 57 files changed, 10072 insertions(+), 5 deletions(-) --- base-commit: 40587f749df216889163dd6e02d88ad53e759e66 change-id: 20241002-b4-ovpn-eeee35c694a2 Best regards, -- Antonio Quartulli <antonio(a)openvpn.net>

1 month, 1 week

2
24
0 0

[PATCH v7 00/10] iommufd: Add vIOMMU infrastructure (Part-2: vDEVICE)

by Nicolin Chen

Following the previous vIOMMU series, this adds another vDEVICE structure, representing the association from an iommufd_device to an iommufd_viommu. This gives the whole architecture a new "v" layer: _______________________________________________________________________ | iommufd (with vIOMMU/vDEVICE) | | _____________ _____________ | | | | | | | | |----------------| vIOMMU |<---| vDEVICE |<------| | | | | | |_____________| | | | | ______ | | _____________ ___|____ | | | | | | | | | | | | | | | IOAS |<---|(HWPT_PAGING)|<---| HWPT_NESTED |<--| DEVICE | | | | |______| |_____________| |_____________| |________| | |______|________|______________|__________________|_______________|_____| | | | | | ______v_____ | ______v_____ ______v_____ ___v__ | struct | | PFN | (paging) | | (nested) | |struct| |iommu_device| |------>|iommu_domain|<----|iommu_domain|<----|device| |____________| storage|____________| |____________| |______| This vDEVICE object is used to collect and store all vIOMMU-related device information/attributes in a VM. As an initial series for vDEVICE, add only the virt_id to the vDEVICE, which is a vIOMMU specific device ID in a VM: e.g. vSID of ARM SMMUv3, vDeviceID of AMD IOMMU, and vRID of Intel VT-d to a Context Table. This virt_id helps IOMMU drivers to link the vID to a pID of the device against the physical IOMMU instance. This is essential for a vIOMMU-based invalidation, where the request contains a device's vID for a device cache flush, e.g. ATC invalidation. Therefore, with this vDEVICE object, support a vIOMMU-based invalidation, by reusing IOMMUFD_CMD_HWPT_INVALIDATE for a vIOMMU object to flush cache with a given driver data. As for the implementation of the series, add driver support in ARM SMMUv3 for a real world use case. This series is on Github: https://github.com/nicolinc/iommufd/commits/iommufd_viommu_p2-v7 (QEMU branch for testing will be provided in Jason's nesting series) Changelog v7 * Added "Reviewed-by" from Jason * Corrected a line of comments in iommufd_vdevice_destroy() v6 https://lore.kernel.org/all/cover.1730313494.git.nicolinc@nvidia.com/ * Fixed kdoc in the uAPI header * Fixed indentations in iommufd.rst * Replaced vdev->idev with vdev->dev * Added "Reviewed-by" from Kevin and Jason * Updated kdoc of struct iommu_vdevice_alloc * Fixed lockdep function call in iommufd_viommu_find_dev * Added missing iommu_dev validation between viommu and idev * Skipped SMMUv3 driver changes (to post in a separate series) * Replaced !cache_invalidate_user in WARN_ON of the allocation path with cache_invalidate_user validation in iommufd_hwpt_invalidate v5 https://lore.kernel.org/all/cover.1729897278.git.nicolinc@nvidia.com/ * Dropped driver-allocated vDEVICE support * Changed vdev_to_dev helper to iommufd_viommu_find_dev v4 https://lore.kernel.org/all/cover.1729555967.git.nicolinc@nvidia.com/ * Added missing brackets in switch-case * Fixed the unreleased idev refcount issue * Reworked the iommufd_vdevice_alloc allocator * Dropped support for IOMMU_VIOMMU_TYPE_DEFAULT * Added missing TEST_LENGTH and fail_nth coverages * Added a verification to the driver-allocated vDEVICE object * Added an iommufd_vdevice_abort for a missing mutex protection * Added a u64 structure arm_vsmmu_invalidation_cmd for user command conversion v3 https://lore.kernel.org/all/cover.1728491532.git.nicolinc@nvidia.com/ * Added Jason's Reviewed-by * Split this invalidation part out of the part-1 series * Repurposed VDEV_ID ioctl to a wider vDEVICE structure and ioctl * Reduced viommu_api functions by allowing drivers to access viommu and vdevice structure directly * Dropped vdevs_rwsem by using xa_lock instead * Dropped arm_smmu_cache_invalidate_user v2 https://lore.kernel.org/all/cover.1724776335.git.nicolinc@nvidia.com/ * Limited vdev_id to one per idev * Added a rw_sem to protect the vdev_id list * Reworked driver-level APIs with proper lockings * Added a new viommu_api file for IOMMUFD_DRIVER config * Dropped useless iommu_dev point from the viommu structure * Added missing index numnbers to new types in the uAPI header * Dropped IOMMU_VIOMMU_INVALIDATE uAPI; Instead, reuse the HWPT one * Reworked mock_viommu_cache_invalidate() using the new iommu helper * Reordered details of set/unset_vdev_id handlers for proper lockings v1 https://lore.kernel.org/all/cover.1723061377.git.nicolinc@nvidia.com/ Thanks! Nicolin Jason Gunthorpe (1): iommu: Add iommu_copy_struct_from_full_user_array helper Nicolin Chen (9): iommufd/viommu: Add IOMMUFD_OBJ_VDEVICE and IOMMU_VDEVICE_ALLOC ioctl iommufd/selftest: Add IOMMU_VDEVICE_ALLOC test coverage iommu/viommu: Add cache_invalidate to iommufd_viommu_ops iommufd: Allow hwpt_id to carry viommu_id for IOMMU_HWPT_INVALIDATE iommufd/viommu: Add iommufd_viommu_find_dev helper iommufd/selftest: Add mock_viommu_cache_invalidate iommufd/selftest: Add IOMMU_TEST_OP_DEV_CHECK_CACHE test command iommufd/selftest: Add vIOMMU coverage for IOMMU_HWPT_INVALIDATE ioctl Documentation: userspace-api: iommufd: Update vDEVICE drivers/iommu/iommufd/iommufd_private.h | 18 ++ drivers/iommu/iommufd/iommufd_test.h | 30 +++ include/linux/iommu.h | 48 ++++- include/linux/iommufd.h | 22 ++ include/uapi/linux/iommufd.h | 31 ++- tools/testing/selftests/iommu/iommufd_utils.h | 83 +++++++ drivers/iommu/iommufd/driver.c | 13 ++ drivers/iommu/iommufd/hw_pagetable.c | 40 +++- drivers/iommu/iommufd/main.c | 6 + drivers/iommu/iommufd/selftest.c | 98 ++++++++- drivers/iommu/iommufd/viommu.c | 76 +++++++ tools/testing/selftests/iommu/iommufd.c | 204 +++++++++++++++++- .../selftests/iommu/iommufd_fail_nth.c | 4 + Documentation/userspace-api/iommufd.rst | 41 +++- 14 files changed, 688 insertions(+), 26 deletions(-) base-commit: 0780dd4af09a5360392f5c376c35ffc2599a9c0e -- 2.43.0

1 month, 1 week

4
14
0 0

[PATCHv5 net 0/3] bond: fix xfrm offload issues

by Hangbin Liu

The first patch fixes the incorrect locks using in bond driver. The second patch fixes the xfrm offload feature during setup active-backup mode. The third patch add a ipsec offload testing. v5: use list_for_each_entry_safe() when del item in list (Nikolay Aleksandrov) do not call spin_lock_bh in sleep function xdo_dev_state_free (Nikolay Aleksandrov) set xso.real_dev = NULL to avoid __xfrm_state_delete() is called in parallel() (Cosmin Ratiu) remove spin lock in bond_ipsec_add_sa_all() as it doesn't resolve the race condition. v4: hold xs->lock for bond_ipsec_{del, add}_sa_all (Cosmin Ratiu) use the defer helpers in lib.sh for selftest (Petr Machata) v3: move the ipsec deletion to bond_ipsec_free_sa (Cosmin Ratiu) v2: do not turn carrier on if bond change link failed (Nikolay Aleksandrov) move the mutex lock to a work queue (Cosmin Ratiu) Hangbin Liu (3): bonding: fix calling sleeping function in spin lock and some race conditions bonding: fix xfrm offload feature setup on active-backup mode selftests: bonding: add ipsec offload test drivers/net/bonding/bond_main.c | 71 +++++--- drivers/net/bonding/bond_netlink.c | 16 +- include/net/bonding.h | 1 + .../selftests/drivers/net/bonding/Makefile | 3 +- .../drivers/net/bonding/bond_ipsec_offload.sh | 154 ++++++++++++++++++ .../selftests/drivers/net/bonding/config | 4 + 6 files changed, 222 insertions(+), 27 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_ipsec_offload.sh -- 2.46.0

1 month, 1 week

5
13
0 0

[PATCH] selftests/mm/cow: Fix the incorrect error handling

by Cyan Yang

There are two error handlings did not check the correct return value. This patch will fix them. Fixes: f4b5fd6946e244cdedc3bbb9a1f24c8133b2077a ("selftests/vm: anon_cow: THP tests") Signed-off-by: Cyan Yang <cyan.yang(a)sifive.com> --- tools/testing/selftests/mm/cow.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/mm/cow.c b/tools/testing/selftests/mm/cow.c index 9446673645eb..16fcadc090a4 100644 --- a/tools/testing/selftests/mm/cow.c +++ b/tools/testing/selftests/mm/cow.c @@ -876,13 +876,13 @@ static void do_run_with_thp(test_fn fn, enum thp_run thp_run, size_t thpsize) mremap_size = thpsize / 2; mremap_mem = mmap(NULL, mremap_size, PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); - if (mem == MAP_FAILED) { + if (mremap_mem == MAP_FAILED) { ksft_test_result_fail("mmap() failed\n"); goto munmap; } tmp = mremap(mem + mremap_size, mremap_size, mremap_size, MREMAP_MAYMOVE | MREMAP_FIXED, mremap_mem); - if (tmp != mremap_mem) { + if (tmp == MAP_FAILED) { ksft_test_result_fail("mremap() failed\n"); goto munmap; } -- 2.39.5 (Apple Git-154)

1 month, 1 week

3
4
0 0

[PATCH] selftest/powerpc/mm/pkey: fix build-break introduced by commit 00894c3fc917

by Madhavan Srinivasan

Build break was reported in the powerpc mailing list for next-20250218 with below errors make[1]: Nothing to be done for 'all'. BUILD_TARGET=/root/venkat/linux-next/tools/testing/selftests/powerpc/mm; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C mm all CC pkey_exec_prot In file included from pkey_exec_prot.c:18: /root/venkat/linux-next/tools/testing/selftests/powerpc/include/pkeys.h: In function ‘pkeys_unsupported’: /root/venkat/linux-next/tools/testing/selftests/powerpc/include/pkeys.h:96:34: error: ‘PKEY_UNRESTRICTED’ undeclared (first use in this function) 96 | pkey = sys_pkey_alloc(0, PKEY_UNRESTRICTED); | ^~~~~~~~~~~~~~~~~ https://lore.kernel.org/all/20250113170619.484698-2-yury.khrustalev@arm.com/ patchset has been queued to arm64/for-next/pkey_unrestricted which is causing a build break in the selftest/powerpc builds. Commit 6d61527d931ba ("mm/pkey: Add PKEY_UNRESTRICTED macro") added a macro PKEY_UNRESTRICTED to handle implicit literal value of 0x0 (which is "unrestricted"). Add the same to selftest/powerpc/pkeys.h to fix the reported build break. Reported-by: Venkat Rao Bagalkote <venkat88(a)linux.ibm.com> Closes: https://lore.kernel.org/lkml/3267ea6e-5a1a-4752-96ef-8351c912d386@linux.ibm… Tested-by: Venkat Rao Bagalkote <venkat88(a)linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy(a)linux.ibm.com> --- Catalin, can you take this fix via arm64/for-next/pkey_unrestricted? Patch applies clean on top of arm64/for-next/pkey_unrestricted tools/testing/selftests/powerpc/include/pkeys.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/selftests/powerpc/include/pkeys.h b/tools/testing/selftests/powerpc/include/pkeys.h index c6d4063dd4f6..d6deb6ffa1b9 100644 --- a/tools/testing/selftests/powerpc/include/pkeys.h +++ b/tools/testing/selftests/powerpc/include/pkeys.h @@ -24,6 +24,9 @@ #undef PKEY_DISABLE_EXECUTE #define PKEY_DISABLE_EXECUTE 0x4 +#undef PKEY_UNRESTRICTED +#define PKEY_UNRESTRICTED 0x0 + /* Older versions of libc do not define this */ #ifndef SEGV_PKUERR #define SEGV_PKUERR 4 -- 2.48.1

1 month, 1 week

2
2
0 0

[PATCH 6.1.y] selftests/vm: fix undefined reference of the `default_huge_page_size`

by Andrey Kalachev

The commit a584c7734a4d ("selftests: mm: fix map_hugetlb failure on 64K page size systems") backported the fix from v6.8 to stable v6.1. The patch uses default_huge_page_size() function, which definition moved into vm_util.[ch] by commit bd4d67e76f699 ("selftests/mm: merge default_huge_page_size() into one") merged to upsream since v6.4. However, in v6.1 common definition/declaration for the default_huge_page_size() we doesn't have, the following build error is seen: map_hugetlb.c:79:25: warning: implicit declaration of function ‘default_huge_page_size’ [-Wimplicit-function-declaration] 79 | hugepage_size = default_huge_page_size(); | ^~~~~~~~~~~~~~~~~~~~~~ /usr/bin/ld: /tmp/ccx95BZz.o: in function `main': map_hugetlb.c:(.text+0x104): undefined reference to `default_huge_page_size' Place default_huge_page_size() function body into map_hugetlb.c to fix this issue. Fixes: a584c7734a4d ("selftests: mm: fix map_hugetlb failure on 64K page size systems") Signed-off-by: Andrey Kalachev <kalachev(a)swemel.ru> --- tools/testing/selftests/vm/map_hugetlb.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/vm/map_hugetlb.c b/tools/testing/selftests/vm/map_hugetlb.c index c65c55b7a789..5826c50b6736 100644 --- a/tools/testing/selftests/vm/map_hugetlb.c +++ b/tools/testing/selftests/vm/map_hugetlb.c @@ -67,6 +67,30 @@ static int read_bytes(char *addr, size_t length) return 0; } +/* + * default_huge_page_size copied from mlock2-tests.c + */ +unsigned long default_huge_page_size(void) +{ + unsigned long hps = 0; + char *line = NULL; + size_t linelen = 0; + FILE *f = fopen("/proc/meminfo", "r"); + + if (!f) + return 0; + while (getline(&line, &linelen, f) > 0) { + if (sscanf(line, "Hugepagesize: %lu kB", &hps) == 1) { + hps <<= 10; + break; + } + } + + free(line); + fclose(f); + return hps; +} + int main(int argc, char **argv) { void *addr; -- 2.39.5

1 month, 1 week

1
0
0 0

[PATCH 00/11] selftests: ublk: bug fixes & consolidation

by Ming Lei

Hello Jens and guys, This patchset fixes several issues(1, 2, 4) and consolidate & improve the tests in the following ways: - support shellcheck and fixes all warning - misc cleanup - improve cleanup code path(module load/unload, cleanup temp files) - help to reuse the same test source code and scripts for other projects(liburing[1], blktest, ...) - add two stress tests for covering IO workloads vs. removing device & killing ublk server, given buffer lifetime is one big thing for ublk-zc [1] https://github.com/ming1/liburing/commits/ublk-zc - just need one line change for overriding skip_code, libring uses 77 and kselftests takes 4 Ming Lei (11): selftests: ublk: make ublk_stop_io_daemon() more reliable selftests: ublk: fix build failure selftests: ublk: add --foreground command line selftests: ublk: fix parsing '-a' argument selftests: ublk: support shellcheck and fix all warning selftests: ublk: don't pass ${dev_id} to _cleanup_test() selftests: ublk: move zero copy feature check into _add_ublk_dev() selftests: ublk: load/unload ublk_drv when preparing & cleaning up tests selftests: ublk: add one stress test for covering IO vs. removing device selftests: ublk: add stress test for covering IO vs. killing ublk server selftests: ublk: improve test usability tools/testing/selftests/ublk/Makefile | 6 + tools/testing/selftests/ublk/kublk.c | 43 +++-- tools/testing/selftests/ublk/kublk.h | 2 + tools/testing/selftests/ublk/test_common.sh | 167 ++++++++++++++---- tools/testing/selftests/ublk/test_loop_01.sh | 13 +- tools/testing/selftests/ublk/test_loop_02.sh | 14 +- tools/testing/selftests/ublk/test_loop_03.sh | 16 +- tools/testing/selftests/ublk/test_loop_04.sh | 14 +- tools/testing/selftests/ublk/test_null_01.sh | 9 +- .../testing/selftests/ublk/test_stress_01.sh | 47 +++++ .../testing/selftests/ublk/test_stress_02.sh | 47 +++++ 11 files changed, 300 insertions(+), 78 deletions(-) create mode 100755 tools/testing/selftests/ublk/test_stress_01.sh create mode 100755 tools/testing/selftests/ublk/test_stress_02.sh -- 2.47.0

1 month, 1 week

3
20
0 0

[PATCH v4 00/12] selftests/mm: Some cleanups from trying to run them

by Brendan Jackman

I never had much luck running mm selftests so I spent a few hours digging into why. Looks like most of the reason is missing SKIP checks, so this series is just adding a bunch of those that I found. I did not do anything like all of them, just the ones I spotted in gup_longterm, gup_test, mmap, userfaultfd and memfd_secret. It's a bit unfortunate to have to skip those tests when ftruncate() fails, but I don't have time to dig deep enough into it to actually make them pass. I have observed the issue on 9pfs and heard rumours that NFS has a similar problem. I'm now able to run these test groups successfully: - mmap - gup_test - compaction - migration - page_frag - userfaultfd - mlock I've never gone past "Waiting for hugetlb memory to get depleted", in the hugetlb tests. I don't know if they are stuck or if they would eventually work if I was patient enough (testing on a 1G machine). I have not investigated further. I had some issues with mlock tests failing due to -ENOSRCH from mlock2(), I can no longer reproduce that though, things work OK now. Of the remaining tests there may be others that work fine, but there's no convenient way to survey the whole output of run_vmtests.sh so I'm just going test by test here. In my spare moments I am slowly chipping away at a setup to run these tests continuously in a reasonably hermetic QEMU environment via virtme-ng: https://github.com/bjackman/linux/blob/5fad4b9c592290f38e0f8bc73c9abb9c99d8… Hopefully that will eventually offer a way to provide a "canned" environment where the tests are known to work, which can be fairly easily reproduced by any developer. Signed-off-by: Brendan Jackman <jackmanb(a)google.com> --- Changes in v4: - NOT ADDRESSED: still using errno==ENOENT as a hacky way to detect buggy filesystems: https://lore.kernel.org/all/CA+i-1C3srkh44tN8dMQ5aD-jhoksUkdEpa+mMfdDtDrPAU… - Added some incomplete cleanups for the mlock tests. - Fixed divide-by-zero error when running uffd-stress on <32cpu systems. - Fixed misnamed nr_threads variable (now nr_parallel). - Fixed reporting io_uring errors (retval instead of errno). - Link to v3: https://lore.kernel.org/r/20250228-mm-selftests-v3-0-958e3b6f0203@google.com Changes in v3: - Added fix for userfaultfd tests. - Dropped attempts to use sudo. - Fixed garbage printf in uffd-stress. (Added EXTRA_CFLAGS=-Werror FORCE_TARGETS=1 to my scripts to prevent such errors happening again). - Fixed missing newlines in ksft_test_result_skip() calls. - Link to v2: https://lore.kernel.org/r/20250221-mm-selftests-v2-0-28c4d66383c5@google.com Changes in v2 (Thanks to Dev for the reviews): - Improve and cleanup some error messages - Add some extra SKIPs - Fix misnaming of nr_cpus variable in uffd tests - Link to v1: https://lore.kernel.org/r/20250220-mm-selftests-v1-0-9bbf57d64463@google.com --- Brendan Jackman (12): selftests/mm: Report errno when things fail in gup_longterm selftests/mm: Skip uffd-stress if userfaultfd not available selftests/mm: Skip uffd-wp-mremap if userfaultfd not available selftests/mm/uffd: Rename nr_cpus -> nr_parallel selftests/mm: Print some details when uffd-stress gets bad params selftests/mm: Don't fail uffd-stress if too many CPUs selftests/mm: Skip map_populate on weird filesystems selftests/mm: Skip gup_longterm tests on weird filesystems selftests/mm: Drop unnecessary sudo usage selftests/mm: Ensure uffd-wp-mremap gets pages of each size selftests/mm: Skip mlock tests if nobody user can't read it selftests/mm/mlock: Print error on failure tools/testing/selftests/mm/gup_longterm.c | 45 +++++++++++++++++--------- tools/testing/selftests/mm/map_populate.c | 7 ++++ tools/testing/selftests/mm/mlock-random-test.c | 4 +-- tools/testing/selftests/mm/mlock2.h | 8 ++++- tools/testing/selftests/mm/run_vmtests.sh | 27 ++++++++++++++-- tools/testing/selftests/mm/uffd-common.c | 8 ++--- tools/testing/selftests/mm/uffd-common.h | 2 +- tools/testing/selftests/mm/uffd-stress.c | 42 +++++++++++++++--------- tools/testing/selftests/mm/uffd-unit-tests.c | 2 +- tools/testing/selftests/mm/uffd-wp-mremap.c | 5 ++- 10 files changed, 105 insertions(+), 45 deletions(-) --- base-commit: dcb38e6757f1b7944af9347ce6b54263d3666478 change-id: 20250220-mm-selftests-2d7d0542face Best regards, -- Brendan Jackman <jackmanb(a)google.com>

1 month, 1 week

1
12
0 0

[PATCHv4 net 0/2] bonding: fix incorrect mac address setting

by Hangbin Liu

The mac address on backup slave should be convert from Solicited-Node Multicast address, not from bonding unicast target address. v4: no change, just repost. v3: also fix the mac setting for slave_set_ns_maddr. (Jay) Add function description for slave_set_ns_maddr/slave_set_ns_maddrs (Jay) v2: fix patch 01's subject Hangbin Liu (2): bonding: fix incorrect MAC address setting to receive NS messages selftests: bonding: fix incorrect mac address drivers/net/bonding/bond_options.c | 55 ++++++++++++++++--- .../drivers/net/bonding/bond_options.sh | 4 +- 2 files changed, 49 insertions(+), 10 deletions(-) -- 2.46.0

1 month, 1 week

3
5
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror March 2025