March 2025 - Linux-kselftest-mirror

[PATCH v2 net 0/6] eth: bnxt: fix several bugs in the bnxt module

by Taehee Yoo

The first fixes setting incorrect skb->truesize. When xdp-mb prog returns XDP_PASS, skb is allocated and initialized. Currently, The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags, but sinfo->nr_frags is flushed by napi_build_skb(). So, it stores sinfo before calling napi_build_skb() and then use it for calculate truesize. The second fixes kernel panic in the bnxt_queue_mem_alloc(). The bnxt_queue_mem_alloc() accesses rx ring descriptor. rx ring descriptors are allocated when the interface is up and it's freed when the interface is down. So, if bnxt_queue_mem_alloc() is called when the interface is down, kernel panic occurs. This patch makes the bnxt_queue_mem_alloc() return -ENETDOWN if rx ring descriptors are not allocated. The third patch fixes kernel panic in the bnxt_queue_{start | stop}(). When a queue is restarted bnxt_queue_{start | stop}() are called. These functions set MRU to 0 to stop packet flow and then to set up the remaining things. MRU variable is a member of vnic_info[] the first vnic_info is for default and the second is for ntuple. The first vnic_info is always allocated when interface is up, but the second is allocated only when ntuple is enabled. (ethtool -K eth0 ntuple <on | off>). Currently, the bnxt_queue_{start | stop}() access vnic_info[BNXT_VNIC_NTUPLE] regardless of whether ntuple is enabled or not. So kernel panic occurs. This patch make the bnxt_queue_{start | stop}() use bp->nr_vnics instead of BNXT_VNIC_NTUPLE. The fourth patch fixes a warning due to checksum state. The bnxt_rx_pkt() checks whether skb->ip_summed is not CHECKSUM_NONE before updating ip_summed. if ip_summed is not CHECKSUM_NONE, it WARNS about it. However, the bnxt_xdp_build_skb() is called in XDP-MB-PASS path and it updates ip_summed earlier than bnxt_rx_pkt(). So, in the XDP-MB-PASS path, the bnxt_rx_pkt() always warns about checksum. Updating ip_summed at the bnxt_xdp_build_skb() is unnecessary and duplicate, so it is removed. The fifth patch makes net_devmem_unbind_dmabuf() ignore -ENETDOWN. When devmem socket is closed, net_devmem_unbind_dmabuf() is called to unbind/release resources. If interface is down, the driver returns -ENETDOWN. The -ENETDOWN return value is not an actual error, because the interface will release resources when the interface is down. So, net_devmem_unbind_dmabuf() needs to ignore -ENETDOWN. The last patch adds XDP testcases to tools/testing/selftests/drivers/net/ping.py. v2: - Do not use num_frags in the bnxt_xdp_build_skb(). (1/6) - Add Review tags from Somnath and Jakub. (2/6) - Add new patch for fixing checksum warning. (4/6) - Add new patch for fixing warning in net_devmem_unbind_dmabuf(). (5/6) - Add new XDP testcases to ping.py (6/6) Taehee Yoo (6): eth: bnxt: fix truesize for mb-xdp-pass case eth: bnxt: return fail if interface is down in bnxt_queue_mem_alloc() eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic eth: bnxt: do not update checksum in bnxt_xdp_build_skb() net: devmem: do not WARN conditionally after netdev_rx_queue_restart() selftests: drv-net: add xdp cases for ping.py drivers/net/ethernet/broadcom/bnxt/bnxt.c | 36 ++-- drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c | 18 +- drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.h | 6 +- net/core/devmem.c | 4 +- tools/testing/selftests/drivers/net/ping.py | 200 ++++++++++++++++-- .../testing/selftests/net/lib/xdp_dummy.bpf.c | 6 + 6 files changed, 221 insertions(+), 49 deletions(-) -- 2.34.1

7 months, 1 week

3
9
0 0

[PATCHv4 net 0/3] bond: fix xfrm offload issues

by Hangbin Liu

The first patch fixes the incorrect locks using in bond driver. The second patch fixes the xfrm offload feature during setup active-backup mode. The third patch add a ipsec offload testing. v4: hold xs->lock for bond_ipsec_{del, add}_sa_all (Cosmin Ratiu) use the defer helpers in lib.sh for selftest (Petr Machata) v3: move the ipsec deletion to bond_ipsec_free_sa (Cosmin Ratiu) v2: do not turn carrier on if bond change link failed (Nikolay Aleksandrov) move the mutex lock to a work queue (Cosmin Ratiu) Hangbin Liu (3): bonding: move IPsec deletion to bond_ipsec_free_sa bonding: fix xfrm offload feature setup on active-backup mode selftests: bonding: add ipsec offload test drivers/net/bonding/bond_main.c | 55 +++++-- drivers/net/bonding/bond_netlink.c | 16 +- include/net/bonding.h | 1 + .../selftests/drivers/net/bonding/Makefile | 3 +- .../drivers/net/bonding/bond_ipsec_offload.sh | 154 ++++++++++++++++++ .../selftests/drivers/net/bonding/config | 4 + 6 files changed, 208 insertions(+), 25 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_ipsec_offload.sh -- 2.46.0

7 months, 1 week

4
13
0 0

[PATCH net-next v2 1/2] selftests: drv-net: add path helper for net/lib

by Jakub Kicinski

Looks like a lot of users of recently added env.rpath() actually want to access stuff under net/lib. Add another helper. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- tools/testing/selftests/drivers/net/hds.py | 2 +- tools/testing/selftests/drivers/net/hw/csum.py | 2 +- tools/testing/selftests/drivers/net/lib/py/env.py | 7 +++++++ 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/drivers/net/hds.py b/tools/testing/selftests/drivers/net/hds.py index 7cc74faed743..def44c10349a 100755 --- a/tools/testing/selftests/drivers/net/hds.py +++ b/tools/testing/selftests/drivers/net/hds.py @@ -20,7 +20,7 @@ from lib.py import defer, ethtool, ip def _xdp_onoff(cfg): - prog = cfg.rpath("../../net/lib/xdp_dummy.bpf.o") + prog = cfg.lpath("xdp_dummy.bpf.o") ip("link set dev %s xdp obj %s sec xdp" % (cfg.ifname, prog)) ip("link set dev %s xdp off" % cfg.ifname) diff --git a/tools/testing/selftests/drivers/net/hw/csum.py b/tools/testing/selftests/drivers/net/hw/csum.py index 701aca1361e0..49ec98aef579 100755 --- a/tools/testing/selftests/drivers/net/hw/csum.py +++ b/tools/testing/selftests/drivers/net/hw/csum.py @@ -88,7 +88,7 @@ from lib.py import bkg, cmd, wait_port_listen with NetDrvEpEnv(__file__, nsim_test=False) as cfg: check_nic_features(cfg) - cfg.bin_local = cfg.rpath("../../../net/lib/csum") + cfg.bin_local = cfg.lpath("csum") cfg.bin_remote = cfg.remote.deploy(cfg.bin_local) cases = [] diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py index fd4d674e6c72..2a1f8bd0ec19 100644 --- a/tools/testing/selftests/drivers/net/lib/py/env.py +++ b/tools/testing/selftests/drivers/net/lib/py/env.py @@ -30,6 +30,13 @@ from .remote import Remote src_dir = Path(self.src_path).parent.resolve() return (src_dir / path).as_posix() + def lpath(self, path): + """ + Similar to rpath, but for files in net/lib TARGET. + """ + lib_dir = (Path(__file__).parent / "../../../../net/lib").resolve() + return (lib_dir / path).as_posix() + def _load_env_file(self): env = os.environ.copy() -- 2.48.1

7 months, 1 week

3
7
0 0

[PATCH net-next] selftests: openvswitch: don't hardcode the drop reason subsys

by Jakub Kicinski

WiFi removed one of their subsys entries from drop reasons, in commit 286e69677065 ("wifi: mac80211: Drop cooked monitor support") SKB_DROP_REASON_SUBSYS_OPENVSWITCH is now 2 not 3. The drop reasons are not uAPI, read the correct value from debug info. We need to enable vmlinux BTF, otherwise pahole needs a few GB of memory to decode the enum name. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: pshelar(a)ovn.org CC: aconole(a)redhat.com CC: amorenoz(a)redhat.com CC: linux-kselftest(a)vger.kernel.org CC: dev(a)openvswitch.org --- tools/testing/selftests/net/config | 2 ++ .../testing/selftests/net/openvswitch/openvswitch.sh | 11 ++++++++--- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config index 5b9baf708950..3365bcc35304 100644 --- a/tools/testing/selftests/net/config +++ b/tools/testing/selftests/net/config @@ -18,6 +18,8 @@ CONFIG_DUMMY=y CONFIG_BRIDGE_VLAN_FILTERING=y CONFIG_BRIDGE=y CONFIG_CRYPTO_CHACHA20POLY1305=m +CONFIG_DEBUG_INFO_BTF=y +CONFIG_DEBUG_INFO_BTF_MODULES=n CONFIG_VLAN_8021Q=y CONFIG_GENEVE=m CONFIG_IFB=y diff --git a/tools/testing/selftests/net/openvswitch/openvswitch.sh b/tools/testing/selftests/net/openvswitch/openvswitch.sh index 960e1ab4dd04..3c8d3455d8e7 100755 --- a/tools/testing/selftests/net/openvswitch/openvswitch.sh +++ b/tools/testing/selftests/net/openvswitch/openvswitch.sh @@ -330,6 +330,11 @@ test_psample() { # - drop packets and verify the right drop reason is reported test_drop_reason() { which perf >/dev/null 2>&1 || return $ksft_skip + which pahole >/dev/null 2>&1 || return $ksft_skip + + ovs_drop_subsys=$(pahole -C skb_drop_reason_subsys | + awk '/OPENVSWITCH/ { print $3; }' | + tr -d ,) sbx_add "test_drop_reason" || return $? @@ -373,7 +378,7 @@ test_drop_reason() { "in_port(2),eth(),eth_type(0x0800),ipv4(src=172.31.110.20,proto=1),icmp()" 'drop' ovs_drop_record_and_run "test_drop_reason" ip netns exec client ping -c 2 172.31.110.20 - ovs_drop_reason_count 0x30001 # OVS_DROP_FLOW_ACTION + ovs_drop_reason_count 0x${ovs_drop_subsys}0001 # OVS_DROP_FLOW_ACTION if [[ "$?" -ne "2" ]]; then info "Did not detect expected drops: $?" return 1 @@ -390,7 +395,7 @@ test_drop_reason() { ovs_drop_record_and_run \ "test_drop_reason" ip netns exec client nc -i 1 -zuv 172.31.110.20 6000 - ovs_drop_reason_count 0x30004 # OVS_DROP_EXPLICIT_ACTION_ERROR + ovs_drop_reason_count 0x${ovs_drop_subsys}0004 # OVS_DROP_EXPLICIT_ACTION_ERROR if [[ "$?" -ne "1" ]]; then info "Did not detect expected explicit error drops: $?" return 1 @@ -398,7 +403,7 @@ test_drop_reason() { ovs_drop_record_and_run \ "test_drop_reason" ip netns exec client nc -i 1 -zuv 172.31.110.20 7000 - ovs_drop_reason_count 0x30003 # OVS_DROP_EXPLICIT_ACTION + ovs_drop_reason_count 0x${ovs_drop_subsys}0003 # OVS_DROP_EXPLICIT_ACTION if [[ "$?" -ne "1" ]]; then info "Did not detect expected explicit drops: $?" return 1 -- 2.48.1

7 months, 1 week

4
3
0 0

[PATCH net-next 1/2] selftests: net: fix error message in bpf_offload

by Jakub Kicinski

We hit a following exception on timeout, nmaps is never set: Test bpftool bound info reporting (own ns)... Traceback (most recent call last): File "/home/virtme/testing-1/tools/testing/selftests/net/./bpf_offload.py", line 1128, in <module> check_dev_info(False, "") File "/home/virtme/testing-1/tools/testing/selftests/net/./bpf_offload.py", line 583, in check_dev_info maps = bpftool_map_list_wait(expected=2, ns=ns) File "/home/virtme/testing-1/tools/testing/selftests/net/./bpf_offload.py", line 215, in bpftool_map_list_wait raise Exception("Time out waiting for map counts to stabilize want %d, have %d" % (expected, nmaps)) NameError: name 'nmaps' is not defined Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org CC: bpf(a)vger.kernel.org --- tools/testing/selftests/net/bpf_offload.py | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/bpf_offload.py b/tools/testing/selftests/net/bpf_offload.py index fd0d959914e4..4a9be8c49561 100755 --- a/tools/testing/selftests/net/bpf_offload.py +++ b/tools/testing/selftests/net/bpf_offload.py @@ -207,9 +207,11 @@ netns = [] # net namespaces to be removed raise Exception("Time out waiting for program counts to stabilize want %d, have %d" % (expected, nprogs)) def bpftool_map_list_wait(expected=0, n_retry=20, ns=""): + nmaps = None for i in range(n_retry): maps = bpftool_map_list(ns=ns) - if len(maps) == expected: + nmaps = len(maps) + if nmaps == expected: return maps time.sleep(0.05) raise Exception("Time out waiting for map counts to stabilize want %d, have %d" % (expected, nmaps)) -- 2.48.1

7 months, 1 week

3
4
0 0

[PATCH net-next v6 0/8] Device memory TCP TX

by Mina Almasry

v6: https://lore.kernel.org/netdev/20250222191517.743530-1-almasrymina@google.c… === v6 has no major changes. Addressed a few issues from Paolo and David, and collected Acks from Stan. Thank you everyone for the review! Changes: - retain behavior to process MSG_FASTOPEN even if the provided cmsg is invalid (Paolo). - Rework the freeing of tx_vec slightly (it now has its own err label). (Paolo). - Squash the commit that makes dmabuf unbinding scheduled work into the same one which implements the TX path so we don't run into future errors on bisecting (Paolo). - Fix/add comments to explain how dmabuf binding refcounting works (David). v5: https://lore.kernel.org/netdev/20250220020914.895431-1-almasrymina@google.c… === v5 has no major changes; it clears up the relatively minor issues pointed out to in v4, and rebases the series on top of net-next to resolve the conflict with a patch that raced to the tree. It also collects the review tags from v4. Changes: - Rebase to net-next - Fix issues in selftest (Stan). - Address comments in the devmem and netmem driver docs (Stan and Bagas) - Fix zerocopy_fill_skb_from_devmem return error code (Stan). v4: https://lore.kernel.org/netdev/20250203223916.1064540-1-almasrymina@google.… === v4 mainly addresses the critical driver support issue surfaced in v3 by Paolo and Stan. Drivers aiming to support netmem_tx should make sure not to pass the netmem dma-addrs to the dma-mapping APIs, as these dma-addrs may come from dma-bufs. Additionally other feedback from v3 is addressed. Major changes: - Add helpers to handle netmem dma-addrs. Add GVE support for netmem_tx. - Fix binding->tx_vec not being freed on error paths during the tx binding. - Add a minimal devmem_tx test to devmem.py. - Clean up everything obsolete from the cover letter (Paolo). v3: https://patchwork.kernel.org/project/netdevbpf/list/?series=929401&state=* === Address minor comments from RFCv2 and fix a few build warnings and ynl-regen issues. No major changes. RFC v2: https://patchwork.kernel.org/project/netdevbpf/list/?series=920056&state=* ======= RFC v2 addresses much of the feedback from RFC v1. I plan on sending something close to this as net-next reopens, sending it slightly early to get feedback if any. Major changes: -------------- - much improved UAPI as suggested by Stan. We now interpret the iov_base of the passed in iov from userspace as the offset into the dmabuf to send from. This removes the need to set iov.iov_base = NULL which may be confusing to users, and enables us to send multiple iovs in the same sendmsg() call. ncdevmem and the docs show a sample use of that. - Removed the duplicate dmabuf iov_iter in binding->iov_iter. I think this is good improvment as it was confusing to keep track of 2 iterators for the same sendmsg, and mistracking both iterators caused a couple of bugs reported in the last iteration that are now resolved with this streamlining. - Improved test coverage in ncdevmem. Now multiple sendmsg() are tested, and sending multiple iovs in the same sendmsg() is tested. - Fixed issue where dmabuf unmapping was happening in invalid context (Stan). ==================================================================== The TX path had been dropped from the Device Memory TCP patch series post RFCv1 [1], to make that series slightly easier to review. This series rebases the implementation of the TX path on top of the net_iov/netmem framework agreed upon and merged. The motivation for the feature is thoroughly described in the docs & cover letter of the original proposal, so I don't repeat the lengthy descriptions here, but they are available in [1]. Full outline on usage of the TX path is detailed in the documentation included with this series. Test example is available via the kselftest included in the series as well. The series is relatively small, as the TX path for this feature largely piggybacks on the existing MSG_ZEROCOPY implementation. Patch Overview: --------------- 1. Documentation & tests to give high level overview of the feature being added. 1. Add netmem refcounting needed for the TX path. 2. Devmem TX netlink API. 3. Devmem TX net stack implementation. 4. Make dma-buf unbinding scheduled work to handle TX cases where it gets freed from contexts where we can't sleep. 5. Add devmem TX documentation. 6. Add scaffolding enabling driver support for netmem_tx. Add helpers, driver feature flag, and docs to enable drivers to declare netmem_tx support. 7. Guard netmem_tx against being enabled against drivers that don't support it. 8. Add devmem_tx selftests. Add TX path to ncdevmem and add a test to devmem.py. Testing: -------- Testing is very similar to devmem TCP RX path. The ncdevmem test used for the RX path is now augemented with client functionality to test TX path. * Test Setup: Kernel: net-next with this RFC and memory provider API cherry-picked locally. Hardware: Google Cloud A3 VMs. NIC: GVE with header split & RSS & flow steering support. Performance results are not included with this version, unfortunately. I'm having issues running the dma-buf exporter driver against the upstream kernel on my test setup. The issues are specific to that dma-buf exporter and do not affect this patch series. I plan to follow up this series with perf fixes if the tests point to issues once they're up and running. Special thanks to Stan who took a stab at rebasing the TX implementation on top of the netmem/net_iov framework merged. Parts of his proposal [2] that are reused as-is are forked off into their own patches to give full credit. [1] https://lore.kernel.org/netdev/20240909054318.1809580-1-almasrymina@google.… [2] https://lore.kernel.org/netdev/20240913150913.1280238-2-sdf@fomichev.me/T/#… Cc: sdf(a)fomichev.me Cc: asml.silence(a)gmail.com Cc: dw(a)davidwei.uk Cc: Jamal Hadi Salim <jhs(a)mojatatu.com> Cc: Victor Nogueira <victor(a)mojatatu.com> Cc: Pedro Tammela <pctammela(a)mojatatu.com> Cc: Samiullah Khawaja <skhawaja(a)google.com> Mina Almasry (7): net: add get_netmem/put_netmem support net: devmem: Implement TX path net: add devmem TCP TX documentation net: enable driver support for netmem TX gve: add netmem TX support to GVE DQO-RDA mode net: check for driver support in netmem TX selftests: ncdevmem: Implement devmem TCP TX Stanislav Fomichev (1): net: devmem: TCP tx netlink api Documentation/netlink/specs/netdev.yaml | 12 + Documentation/networking/devmem.rst | 150 ++++++++- .../networking/net_cachelines/net_device.rst | 1 + Documentation/networking/netdev-features.rst | 5 + Documentation/networking/netmem.rst | 23 +- drivers/net/ethernet/google/gve/gve_main.c | 4 + drivers/net/ethernet/google/gve/gve_tx_dqo.c | 8 +- include/linux/netdevice.h | 2 + include/linux/skbuff.h | 17 +- include/linux/skbuff_ref.h | 4 +- include/net/netmem.h | 23 ++ include/net/sock.h | 1 + include/uapi/linux/netdev.h | 1 + net/core/datagram.c | 48 ++- net/core/dev.c | 3 + net/core/devmem.c | 115 ++++++- net/core/devmem.h | 77 ++++- net/core/netdev-genl-gen.c | 13 + net/core/netdev-genl-gen.h | 1 + net/core/netdev-genl.c | 73 ++++- net/core/skbuff.c | 48 ++- net/core/sock.c | 6 + net/ipv4/ip_output.c | 3 +- net/ipv4/tcp.c | 50 ++- net/ipv6/ip6_output.c | 3 +- net/vmw_vsock/virtio_transport_common.c | 5 +- tools/include/uapi/linux/netdev.h | 1 + .../selftests/drivers/net/hw/devmem.py | 26 +- .../selftests/drivers/net/hw/ncdevmem.c | 300 +++++++++++++++++- 29 files changed, 950 insertions(+), 73 deletions(-) base-commit: 80c4a0015ce249cf0917a04dbb3cc652a6811079 -- 2.48.1.658.g4767266eb4-goog

7 months, 1 week

6
24
0 0

[PATCH] selftests/bpf: Move test_lwt_ip_encap to test_progs

by Bastien Curutchet (eBPF Foundation)

test_lwt_ip_encap.sh isn't used by the BPF CI. Add a new file in the test_progs framework to migrate the tests done by test_lwt_ip_encap.sh. It uses the same network topology and the same BPF programs located in progs/test_lwt_ip_encap.c. Rework the GSO part to avoid using nc and dd. Remove test_lwt_ip_encap.sh and its Makefile entry. Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com> --- tools/testing/selftests/bpf/Makefile | 3 +- .../selftests/bpf/prog_tests/lwt_ip_encap.c | 540 +++++++++++++++++++++ tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 476 ------------------ 3 files changed, 541 insertions(+), 478 deletions(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index e6a02d5b87d123cef7e6b41bfbc96d34083f38e1..df4814b5200a5a0e732b19ab3a5975957fb7cbc9 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -95,7 +95,7 @@ TEST_GEN_PROGS += test_progs-cpuv4 TEST_INST_SUBDIRS += cpuv4 endif -TEST_GEN_FILES = test_lwt_ip_encap.bpf.o test_tc_edt.bpf.o +TEST_GEN_FILES = test_tc_edt.bpf.o TEST_FILES = xsk_prereqs.sh $(wildcard progs/btf_dump_test_case_*.c) # Order correspond to 'make run_tests' order @@ -104,7 +104,6 @@ TEST_PROGS := test_kmod.sh \ test_lirc_mode2.sh \ test_xdp_vlan_mode_generic.sh \ test_xdp_vlan_mode_native.sh \ - test_lwt_ip_encap.sh \ test_tc_tunnel.sh \ test_tc_edt.sh \ test_xdping.sh \ diff --git a/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c b/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c new file mode 100644 index 0000000000000000000000000000000000000000..61fcded43b46cab7775237c6d85de07b5df7d87e --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c @@ -0,0 +1,540 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <netinet/in.h> + +#include "network_helpers.h" +#include "test_progs.h" + +#define BPF_FILE "test_lwt_ip_encap.bpf.o" + +#define NETNS_NAME_SIZE 32 +#define NETNS_BASE "ns-lwt-ip-encap" + +#define IP4_ADDR_1 "172.16.1.100" +#define IP4_ADDR_2 "172.16.2.100" +#define IP4_ADDR_3 "172.16.3.100" +#define IP4_ADDR_4 "172.16.4.100" +#define IP4_ADDR_5 "172.16.5.100" +#define IP4_ADDR_6 "172.16.6.100" +#define IP4_ADDR_7 "172.16.7.100" +#define IP4_ADDR_8 "172.16.8.100" +#define IP4_ADDR_GRE "172.16.16.100" + +#define IP4_ADDR_SRC IP4_ADDR_1 +#define IP4_ADDR_DST IP4_ADDR_4 + +#define IP6_ADDR_1 "fb01::1" +#define IP6_ADDR_2 "fb02::1" +#define IP6_ADDR_3 "fb03::1" +#define IP6_ADDR_4 "fb04::1" +#define IP6_ADDR_5 "fb05::1" +#define IP6_ADDR_6 "fb06::1" +#define IP6_ADDR_7 "fb07::1" +#define IP6_ADDR_8 "fb08::1" +#define IP6_ADDR_GRE "fb10::1" + +#define IP6_ADDR_SRC IP6_ADDR_1 +#define IP6_ADDR_DST IP6_ADDR_4 + +/* Setup/topology: + * + * NS1 NS2 NS3 + * veth1 <---> veth2 veth3 <---> veth4 (the top route) + * veth5 <---> veth6 veth7 <---> veth8 (the bottom route) + * + * Each vethN gets IP[4|6]_ADDR_N address. + * + * IP*_ADDR_SRC = IP*_ADDR_1 + * IP*_ADDR_DST = IP*_ADDR_4 + * + * All tests test pings from IP*_ADDR__SRC to IP*_ADDR_DST. + * + * By default, routes are configured to allow packets to go + * IP*_ADDR_1 <=> IP*_ADDR_2 <=> IP*_ADDR_3 <=> IP*_ADDR_4 (the top route). + * + * A GRE device is installed in NS3 with IP*_ADDR_GRE, and + * NS1/NS2 are configured to route packets to IP*_ADDR_GRE via IP*_ADDR_8 + * (the bottom route). + * + * Tests: + * + * 1. Routes NS2->IP*_ADDR_DST are brought down, so the only way a ping + * from IP*_ADDR_SRC to IP*_ADDR_DST can work is via IP*_ADDR_GRE. + * + * 2a. In an egress test, a bpf LWT_XMIT program is installed on veth1 + * that encaps the packets with an IP/GRE header to route to IP*_ADDR_GRE. + * + * ping: SRC->[encap at veth1:egress]->GRE:decap->DST + * ping replies go DST->SRC directly + * + * 2b. In an ingress test, a bpf LWT_IN program is installed on veth2 + * that encaps the packets with an IP/GRE header to route to IP*_ADDR_GRE. + * + * ping: SRC->[encap at veth2:ingress]->GRE:decap->DST + * ping replies go DST->SRC directly + */ + +static int create_ns(char *name, size_t name_sz) +{ + if (!name) + goto fail; + + if (!ASSERT_OK(append_tid(name, name_sz), "append TID")) + goto fail; + + SYS(fail, "ip netns add %s", name); + + /* rp_filter gets confused by what these tests are doing, so disable it */ + SYS(fail, "ip netns exec %s sysctl -wq net.ipv4.conf.all.rp_filter=0", name); + SYS(fail, "ip netns exec %s sysctl -wq net.ipv4.conf.default.rp_filter=0", name); + /* Disable IPv6 DAD because it sometimes takes too long and fails tests */ + SYS(fail, "ip netns exec %s sysctl -wq net.ipv6.conf.all.accept_dad=0", name); + SYS(fail, "ip netns exec %s sysctl -wq net.ipv6.conf.default.accept_dad=0", name); + + return 0; +fail: + return -1; +} + +static int set_top_addr(const char *ns1, const char *ns2, const char *ns3) +{ + SYS(fail, "ip -n %s a add %s/24 dev veth1", ns1, IP4_ADDR_1); + SYS(fail, "ip -n %s a add %s/24 dev veth2", ns2, IP4_ADDR_2); + SYS(fail, "ip -n %s a add %s/24 dev veth3", ns2, IP4_ADDR_3); + SYS(fail, "ip -n %s a add %s/24 dev veth4", ns3, IP4_ADDR_4); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth1", ns1, IP6_ADDR_1); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth2", ns2, IP6_ADDR_2); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth3", ns2, IP6_ADDR_3); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth4", ns3, IP6_ADDR_4); + + SYS(fail, "ip -n %s link set dev veth1 up", ns1); + SYS(fail, "ip -n %s link set dev veth2 up", ns2); + SYS(fail, "ip -n %s link set dev veth3 up", ns2); + SYS(fail, "ip -n %s link set dev veth4 up", ns3); + + return 0; +fail: + return 1; +} + +static int set_bottom_addr(const char *ns1, const char *ns2, const char *ns3) +{ + SYS(fail, "ip -n %s a add %s/24 dev veth5", ns1, IP4_ADDR_5); + SYS(fail, "ip -n %s a add %s/24 dev veth6", ns2, IP4_ADDR_6); + SYS(fail, "ip -n %s a add %s/24 dev veth7", ns2, IP4_ADDR_7); + SYS(fail, "ip -n %s a add %s/24 dev veth8", ns3, IP4_ADDR_8); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth5", ns1, IP6_ADDR_5); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth6", ns2, IP6_ADDR_6); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth7", ns2, IP6_ADDR_7); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth8", ns3, IP6_ADDR_8); + + SYS(fail, "ip -n %s link set dev veth5 up", ns1); + SYS(fail, "ip -n %s link set dev veth6 up", ns2); + SYS(fail, "ip -n %s link set dev veth7 up", ns2); + SYS(fail, "ip -n %s link set dev veth8 up", ns3); + + return 0; +fail: + return 1; +} + +static int configure_vrf(const char *ns1, const char *ns2) +{ + if (!ns1 || !ns2) + goto fail; + + SYS(fail, "ip -n %s link add red type vrf table 1001", ns1); + SYS(fail, "ip -n %s link set red up", ns1); + SYS(fail, "ip -n %s route add table 1001 unreachable default metric 8192", ns1); + SYS(fail, "ip -n %s -6 route add table 1001 unreachable default metric 8192", ns1); + SYS(fail, "ip -n %s link set veth1 vrf red", ns1); + SYS(fail, "ip -n %s link set veth5 vrf red", ns1); + + SYS(fail, "ip -n %s link add red type vrf table 1001", ns2); + SYS(fail, "ip -n %s link set red up", ns2); + SYS(fail, "ip -n %s route add table 1001 unreachable default metric 8192", ns2); + SYS(fail, "ip -n %s -6 route add table 1001 unreachable default metric 8192", ns2); + SYS(fail, "ip -n %s link set veth2 vrf red", ns2); + SYS(fail, "ip -n %s link set veth3 vrf red", ns2); + SYS(fail, "ip -n %s link set veth6 vrf red", ns2); + SYS(fail, "ip -n %s link set veth7 vrf red", ns2); + + return 0; +fail: + return -1; +} + +static int configure_ns1(const char *ns1, const char *vrf) +{ + struct nstoken *nstoken = NULL; + + if (!ns1 || !vrf) + goto fail; + + nstoken = open_netns(ns1); + if (!ASSERT_OK_PTR(nstoken, "open ns1")) + goto fail; + + /* Top route */ + SYS(fail, "ip route add %s/32 dev veth1 %s", IP4_ADDR_2, vrf); + SYS(fail, "ip route add default dev veth1 via %s %s", IP4_ADDR_2, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth1 %s", IP6_ADDR_2, vrf); + SYS(fail, "ip -6 route add default dev veth1 via %s %s", IP6_ADDR_2, vrf); + /* Bottom route */ + SYS(fail, "ip route add %s/32 dev veth5 %s", IP4_ADDR_6, vrf); + SYS(fail, "ip route add %s/32 dev veth5 via %s %s", IP4_ADDR_7, IP4_ADDR_6, vrf); + SYS(fail, "ip route add %s/32 dev veth5 via %s %s", IP4_ADDR_8, IP4_ADDR_6, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth5 %s", IP6_ADDR_6, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth5 via %s %s", IP6_ADDR_7, IP6_ADDR_6, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth5 via %s %s", IP6_ADDR_8, IP6_ADDR_6, vrf); + + close_netns(nstoken); + return 0; +fail: + close_netns(nstoken); + return -1; +} + +static int configure_ns2(const char *ns2, const char *vrf) +{ + struct nstoken *nstoken = NULL; + + if (!ns2 || !vrf) + goto fail; + + nstoken = open_netns(ns2); + if (!ASSERT_OK_PTR(nstoken, "open ns2")) + goto fail; + + SYS(fail, "ip netns exec %s sysctl -wq net.ipv4.ip_forward=1", ns2); + SYS(fail, "ip netns exec %s sysctl -wq net.ipv6.conf.all.forwarding=1", ns2); + + /* Top route */ + SYS(fail, "ip route add %s/32 dev veth2 %s", IP4_ADDR_1, vrf); + SYS(fail, "ip route add %s/32 dev veth3 %s", IP4_ADDR_4, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth2 %s", IP6_ADDR_1, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth3 %s", IP6_ADDR_4, vrf); + /* Bottom route */ + SYS(fail, "ip route add %s/32 dev veth6 %s", IP4_ADDR_5, vrf); + SYS(fail, "ip route add %s/32 dev veth7 %s", IP4_ADDR_8, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth6 %s", IP6_ADDR_5, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth7 %s", IP6_ADDR_8, vrf); + + close_netns(nstoken); + return 0; +fail: + close_netns(nstoken); + return -1; +} + +static int configure_ns3(const char *ns3) +{ + struct nstoken *nstoken = NULL; + + if (!ns3) + goto fail; + + nstoken = open_netns(ns3); + if (!ASSERT_OK_PTR(nstoken, "open ns3")) + goto fail; + + /* Top route */ + SYS(fail, "ip route add %s/32 dev veth4", IP4_ADDR_3); + SYS(fail, "ip route add %s/32 dev veth4 via %s", IP4_ADDR_1, IP4_ADDR_3); + SYS(fail, "ip route add %s/32 dev veth4 via %s", IP4_ADDR_2, IP4_ADDR_3); + SYS(fail, "ip -6 route add %s/128 dev veth4", IP6_ADDR_3); + SYS(fail, "ip -6 route add %s/128 dev veth4 via %s", IP6_ADDR_1, IP6_ADDR_3); + SYS(fail, "ip -6 route add %s/128 dev veth4 via %s", IP6_ADDR_2, IP6_ADDR_3); + /* Bottom route */ + SYS(fail, "ip route add %s/32 dev veth8", IP4_ADDR_7); + SYS(fail, "ip route add %s/32 dev veth8 via %s", IP4_ADDR_5, IP4_ADDR_7); + SYS(fail, "ip route add %s/32 dev veth8 via %s", IP4_ADDR_6, IP4_ADDR_7); + SYS(fail, "ip -6 route add %s/128 dev veth8", IP6_ADDR_7); + SYS(fail, "ip -6 route add %s/128 dev veth8 via %s", IP6_ADDR_5, IP6_ADDR_7); + SYS(fail, "ip -6 route add %s/128 dev veth8 via %s", IP6_ADDR_6, IP6_ADDR_7); + + /* Configure IPv4 GRE device */ + SYS(fail, "ip tunnel add gre_dev mode gre remote %s local %s ttl 255", + IP4_ADDR_1, IP4_ADDR_GRE); + SYS(fail, "ip link set gre_dev up"); + SYS(fail, "ip a add %s dev gre_dev", IP4_ADDR_GRE); + + /* Configure IPv6 GRE device */ + SYS(fail, "ip tunnel add gre6_dev mode ip6gre remote %s local %s ttl 255", + IP6_ADDR_1, IP6_ADDR_GRE); + SYS(fail, "ip link set gre6_dev up"); + SYS(fail, "ip a add %s dev gre6_dev", IP6_ADDR_GRE); + + close_netns(nstoken); + return 0; +fail: + close_netns(nstoken); + return -1; +} + +static int setup_network(char *ns1, char *ns2, char *ns3, const char *vrf) +{ + if (!ns1 || !ns2 || !ns3 || !vrf) + goto fail; + + SYS(fail, "ip -n %s link add veth1 type veth peer name veth2 netns %s", ns1, ns2); + SYS(fail, "ip -n %s link add veth3 type veth peer name veth4 netns %s", ns2, ns3); + SYS(fail, "ip -n %s link add veth5 type veth peer name veth6 netns %s", ns1, ns2); + SYS(fail, "ip -n %s link add veth7 type veth peer name veth8 netns %s", ns2, ns3); + + if (vrf[0]) { + if (!ASSERT_OK(configure_vrf(ns1, ns2), "configure vrf")) + goto fail; + } + if (!ASSERT_OK(set_top_addr(ns1, ns2, ns3), "set top addresses")) + goto fail; + + if (!ASSERT_OK(set_bottom_addr(ns1, ns2, ns3), "set bottom addresses")) + goto fail; + + if (!ASSERT_OK(configure_ns1(ns1, vrf), "configure ns1 routes")) + goto fail; + + if (!ASSERT_OK(configure_ns2(ns2, vrf), "configure ns2 routes")) + goto fail; + + if (!ASSERT_OK(configure_ns3(ns3), "configure ns3 routes")) + goto fail; + + /* Link bottom route to the GRE tunnels */ + SYS(fail, "ip -n %s route add %s/32 dev veth5 via %s %s", + ns1, IP4_ADDR_GRE, IP4_ADDR_6, vrf); + SYS(fail, "ip -n %s route add %s/32 dev veth7 via %s %s", + ns2, IP4_ADDR_GRE, IP4_ADDR_8, vrf); + SYS(fail, "ip -n %s -6 route add %s/128 dev veth5 via %s %s", + ns1, IP6_ADDR_GRE, IP6_ADDR_6, vrf); + SYS(fail, "ip -n %s -6 route add %s/128 dev veth7 via %s %s", + ns2, IP6_ADDR_GRE, IP6_ADDR_8, vrf); + + return 0; +fail: + return -1; +} + +int remove_routes_to_gredev(const char *ns1, const char *ns2, const char *vrf) +{ + SYS(fail, "ip -n %s route del %s dev veth5 %s", ns1, IP4_ADDR_GRE, vrf); + SYS(fail, "ip -n %s route del %s dev veth7 %s", ns2, IP4_ADDR_GRE, vrf); + SYS(fail, "ip -n %s -6 route del %s/128 dev veth5 %s", ns1, IP6_ADDR_GRE, vrf); + SYS(fail, "ip -n %s -6 route del %s/128 dev veth7 %s", ns2, IP6_ADDR_GRE, vrf); + + return 0; +fail: + return -1; +} + +int add_unreachable_routes_to_gredev(const char *ns1, const char *ns2, const char *vrf) +{ + SYS(fail, "ip -n %s route add unreachable %s/32 %s", ns1, IP4_ADDR_GRE, vrf); + SYS(fail, "ip -n %s route add unreachable %s/32 %s", ns2, IP4_ADDR_GRE, vrf); + SYS(fail, "ip -n %s -6 route add unreachable %s/128 %s", ns1, IP6_ADDR_GRE, vrf); + SYS(fail, "ip -n %s -6 route add unreachable %s/128 %s", ns2, IP6_ADDR_GRE, vrf); + + return 0; +fail: + return -1; +} + +#define GSO_SIZE 5000 +#define GSO_TCP_PORT 9000 +/* This tests the fix from commit ea0371f78799 ("net: fix GSO in bpf_lwt_push_ip_encap") */ +static int test_gso_fix(const char *ns1, const char *ns3, int family) +{ + const char *ip_addr = family == AF_INET ? IP4_ADDR_DST : IP6_ADDR_DST; + char gso_packet[GSO_SIZE] = {}; + struct nstoken *nstoken = NULL; + int sfd, cfd, afd; + ssize_t bytes; + int ret = -1; + + if (!ns1 || !ns3) + return ret; + + nstoken = open_netns(ns3); + if (!ASSERT_OK_PTR(nstoken, "open ns3")) + return ret; + + sfd = start_server_str(family, SOCK_STREAM, ip_addr, GSO_TCP_PORT, NULL); + if (!ASSERT_OK_FD(sfd, "start server")) + goto close_netns; + + close_netns(nstoken); + + nstoken = open_netns(ns1); + if (!ASSERT_OK_PTR(nstoken, "open ns1")) + goto close_server; + + cfd = connect_to_addr_str(family, SOCK_STREAM, ip_addr, GSO_TCP_PORT, NULL); + if (!ASSERT_OK_FD(cfd, "connect to server")) + goto close_server; + + close_netns(nstoken); + nstoken = NULL; + + afd = accept(sfd, NULL, NULL); + if (!ASSERT_OK_FD(afd, "accept")) + goto close_client; + + /* Send a packet larger than MTU */ + bytes = send(cfd, gso_packet, GSO_SIZE, 0); + if (!ASSERT_EQ(bytes, GSO_SIZE, "send packet")) + goto close_accept; + + /* Verify we received all expected bytes */ + bytes = read(afd, gso_packet, GSO_SIZE); + if (!ASSERT_EQ(bytes, GSO_SIZE, "receive packet")) + goto close_accept; + + ret = 0; + +close_accept: + close(afd); +close_client: + close(cfd); +close_server: + close(sfd); +close_netns: + close_netns(nstoken); + + return ret; +} + +static int check_ping_ok(const char *ns1) +{ + SYS(fail, "ip netns exec %s ping -c 1 -W1 -I veth1 %s > /dev/null", ns1, IP4_ADDR_DST); + SYS(fail, "ip netns exec %s ping6 -c 1 -W1 -I veth1 %s > /dev/null", ns1, IP6_ADDR_DST); + return 0; +fail: + return -1; +} + +static int check_ping_fails(const char *ns1) +{ + int ret; + + ret = SYS_NOFAIL("ip netns exec %s ping -c 1 -W1 -I veth1 %s", ns1, IP4_ADDR_DST); + if (!ret) + return -1; + + ret = SYS_NOFAIL("ip netns exec %s ping6 -c 1 -W1 -I veth1 %s", ns1, IP6_ADDR_DST); + if (!ret) + return -1; + + return 0; +} + +#define EGRESS true +#define INGRESS false +#define IPV4_ENCAP true +#define IPV6_ENCAP false +static void lwt_ip_encap(bool ipv4_encap, bool egress, const char *vrf) +{ + char ns1[NETNS_NAME_SIZE] = NETNS_BASE "-1-"; + char ns2[NETNS_NAME_SIZE] = NETNS_BASE "-2-"; + char ns3[NETNS_NAME_SIZE] = NETNS_BASE "-3-"; + char *sec = ipv4_encap ? "encap_gre" : "encap_gre6"; + + if (!vrf) + return; + + if (!ASSERT_OK(create_ns(ns1, NETNS_NAME_SIZE), "create ns1")) + goto out; + if (!ASSERT_OK(create_ns(ns2, NETNS_NAME_SIZE), "create ns2")) + goto out; + if (!ASSERT_OK(create_ns(ns3, NETNS_NAME_SIZE), "create ns3")) + goto out; + + if (!ASSERT_OK(setup_network(ns1, ns2, ns3, vrf), "setup network")) + goto out; + + /* By default, pings work */ + if (!ASSERT_OK(check_ping_ok(ns1), "ping OK")) + goto out; + + /* Remove NS2->DST routes, ping fails */ + SYS(out, "ip -n %s route del %s/32 dev veth3 %s", ns2, IP4_ADDR_DST, vrf); + SYS(out, "ip -n %s -6 route del %s/128 dev veth3 %s", ns2, IP6_ADDR_DST, vrf); + if (!ASSERT_OK(check_ping_fails(ns1), "ping expected fail")) + goto out; + + /* Install replacement routes (LWT/eBPF), pings succeed */ + if (egress) { + SYS(out, "ip -n %s route add %s encap bpf xmit obj %s sec %s dev veth1 %s", + ns1, IP4_ADDR_DST, BPF_FILE, sec, vrf); + SYS(out, "ip -n %s -6 route add %s encap bpf xmit obj %s sec %s dev veth1 %s", + ns1, IP6_ADDR_DST, BPF_FILE, sec, vrf); + } else { + SYS(out, "ip -n %s route add %s encap bpf in obj %s sec %s dev veth2 %s", + ns2, IP4_ADDR_DST, BPF_FILE, sec, vrf); + SYS(out, "ip -n %s -6 route add %s encap bpf in obj %s sec %s dev veth2 %s", + ns2, IP6_ADDR_DST, BPF_FILE, sec, vrf); + } + + if (!ASSERT_OK(check_ping_ok(ns1), "ping OK")) + goto out; + + /* Skip GSO tests with VRF: VRF routing needs properly assigned + * source IP/device, which is easy to do with ping but hard with TCP. + */ + if (egress && !vrf[0]) { + if (!ASSERT_OK(test_gso_fix(ns1, ns3, AF_INET), "test GSO")) + goto out; + } + + /* Negative test: remove routes to GRE devices: ping fails */ + if (!ASSERT_OK(remove_routes_to_gredev(ns1, ns2, vrf), "remove routes to gredev")) + goto out; + if (!ASSERT_OK(check_ping_fails(ns1), "ping expected fail")) + goto out; + + /* Another negative test */ + if (!ASSERT_OK(add_unreachable_routes_to_gredev(ns1, ns2, vrf), + "add unreachable routes")) + goto out; + ASSERT_OK(check_ping_fails(ns1), "ping expected fail"); + +out: + SYS_NOFAIL("ip netns del %s", ns1); + SYS_NOFAIL("ip netns del %s", ns2); + SYS_NOFAIL("ip netns del %s", ns3); +} + +void test_lwt_ip_encap_vrf_ipv6(void) +{ + if (test__start_subtest("egress")) + lwt_ip_encap(IPV6_ENCAP, EGRESS, "vrf red"); + + if (test__start_subtest("ingress")) + lwt_ip_encap(IPV6_ENCAP, INGRESS, "vrf red"); +} + +void test_lwt_ip_encap_vrf_ipv4(void) +{ + if (test__start_subtest("egress")) + lwt_ip_encap(IPV4_ENCAP, EGRESS, "vrf red"); + + if (test__start_subtest("ingress")) + lwt_ip_encap(IPV4_ENCAP, INGRESS, "vrf red"); +} + +void test_lwt_ip_encap_ipv6(void) +{ + if (test__start_subtest("egress")) + lwt_ip_encap(IPV6_ENCAP, EGRESS, ""); + + if (test__start_subtest("ingress")) + lwt_ip_encap(IPV6_ENCAP, INGRESS, ""); +} + +void test_lwt_ip_encap_ipv4(void) +{ + if (test__start_subtest("egress")) + lwt_ip_encap(IPV4_ENCAP, EGRESS, ""); + + if (test__start_subtest("ingress")) + lwt_ip_encap(IPV4_ENCAP, INGRESS, ""); +} diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh deleted file mode 100755 index 1e565f47aca940d8dc7235d823c48537d7a708b8..0000000000000000000000000000000000000000 --- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh +++ /dev/null @@ -1,476 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -# Setup/topology: -# -# NS1 NS2 NS3 -# veth1 <---> veth2 veth3 <---> veth4 (the top route) -# veth5 <---> veth6 veth7 <---> veth8 (the bottom route) -# -# each vethN gets IPv[4|6]_N address -# -# IPv*_SRC = IPv*_1 -# IPv*_DST = IPv*_4 -# -# all tests test pings from IPv*_SRC to IPv*_DST -# -# by default, routes are configured to allow packets to go -# IP*_1 <=> IP*_2 <=> IP*_3 <=> IP*_4 (the top route) -# -# a GRE device is installed in NS3 with IPv*_GRE, and -# NS1/NS2 are configured to route packets to IPv*_GRE via IP*_8 -# (the bottom route) -# -# Tests: -# -# 1. routes NS2->IPv*_DST are brought down, so the only way a ping -# from IP*_SRC to IP*_DST can work is via IPv*_GRE -# -# 2a. in an egress test, a bpf LWT_XMIT program is installed on veth1 -# that encaps the packets with an IP/GRE header to route to IPv*_GRE -# -# ping: SRC->[encap at veth1:egress]->GRE:decap->DST -# ping replies go DST->SRC directly -# -# 2b. in an ingress test, a bpf LWT_IN program is installed on veth2 -# that encaps the packets with an IP/GRE header to route to IPv*_GRE -# -# ping: SRC->[encap at veth2:ingress]->GRE:decap->DST -# ping replies go DST->SRC directly - -BPF_FILE="test_lwt_ip_encap.bpf.o" -if [[ $EUID -ne 0 ]]; then - echo "This script must be run as root" - echo "FAIL" - exit 1 -fi - -readonly NS1="ns1-$(mktemp -u XXXXXX)" -readonly NS2="ns2-$(mktemp -u XXXXXX)" -readonly NS3="ns3-$(mktemp -u XXXXXX)" - -readonly IPv4_1="172.16.1.100" -readonly IPv4_2="172.16.2.100" -readonly IPv4_3="172.16.3.100" -readonly IPv4_4="172.16.4.100" -readonly IPv4_5="172.16.5.100" -readonly IPv4_6="172.16.6.100" -readonly IPv4_7="172.16.7.100" -readonly IPv4_8="172.16.8.100" -readonly IPv4_GRE="172.16.16.100" - -readonly IPv4_SRC=$IPv4_1 -readonly IPv4_DST=$IPv4_4 - -readonly IPv6_1="fb01::1" -readonly IPv6_2="fb02::1" -readonly IPv6_3="fb03::1" -readonly IPv6_4="fb04::1" -readonly IPv6_5="fb05::1" -readonly IPv6_6="fb06::1" -readonly IPv6_7="fb07::1" -readonly IPv6_8="fb08::1" -readonly IPv6_GRE="fb10::1" - -readonly IPv6_SRC=$IPv6_1 -readonly IPv6_DST=$IPv6_4 - -TEST_STATUS=0 -TESTS_SUCCEEDED=0 -TESTS_FAILED=0 - -TMPFILE="" - -process_test_results() -{ - if [[ "${TEST_STATUS}" -eq 0 ]] ; then - echo "PASS" - TESTS_SUCCEEDED=$((TESTS_SUCCEEDED+1)) - else - echo "FAIL" - TESTS_FAILED=$((TESTS_FAILED+1)) - fi -} - -print_test_summary_and_exit() -{ - echo "passed tests: ${TESTS_SUCCEEDED}" - echo "failed tests: ${TESTS_FAILED}" - if [ "${TESTS_FAILED}" -eq "0" ] ; then - exit 0 - else - exit 1 - fi -} - -setup() -{ - set -e # exit on error - TEST_STATUS=0 - - # create devices and namespaces - ip netns add "${NS1}" - ip netns add "${NS2}" - ip netns add "${NS3}" - - # rp_filter gets confused by what these tests are doing, so disable it - ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS1} sysctl -wq net.ipv4.conf.default.rp_filter=0 - ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0 - ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0 - - # disable IPv6 DAD because it sometimes takes too long and fails tests - ip netns exec ${NS1} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS3} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS1} sysctl -wq net.ipv6.conf.default.accept_dad=0 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.default.accept_dad=0 - ip netns exec ${NS3} sysctl -wq net.ipv6.conf.default.accept_dad=0 - - ip link add veth1 type veth peer name veth2 - ip link add veth3 type veth peer name veth4 - ip link add veth5 type veth peer name veth6 - ip link add veth7 type veth peer name veth8 - - ip netns exec ${NS2} sysctl -wq net.ipv4.ip_forward=1 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.forwarding=1 - - ip link set veth1 netns ${NS1} - ip link set veth2 netns ${NS2} - ip link set veth3 netns ${NS2} - ip link set veth4 netns ${NS3} - ip link set veth5 netns ${NS1} - ip link set veth6 netns ${NS2} - ip link set veth7 netns ${NS2} - ip link set veth8 netns ${NS3} - - if [ ! -z "${VRF}" ] ; then - ip -netns ${NS1} link add red type vrf table 1001 - ip -netns ${NS1} link set red up - ip -netns ${NS1} route add table 1001 unreachable default metric 8192 - ip -netns ${NS1} -6 route add table 1001 unreachable default metric 8192 - ip -netns ${NS1} link set veth1 vrf red - ip -netns ${NS1} link set veth5 vrf red - - ip -netns ${NS2} link add red type vrf table 1001 - ip -netns ${NS2} link set red up - ip -netns ${NS2} route add table 1001 unreachable default metric 8192 - ip -netns ${NS2} -6 route add table 1001 unreachable default metric 8192 - ip -netns ${NS2} link set veth2 vrf red - ip -netns ${NS2} link set veth3 vrf red - ip -netns ${NS2} link set veth6 vrf red - ip -netns ${NS2} link set veth7 vrf red - fi - - # configure addesses: the top route (1-2-3-4) - ip -netns ${NS1} addr add ${IPv4_1}/24 dev veth1 - ip -netns ${NS2} addr add ${IPv4_2}/24 dev veth2 - ip -netns ${NS2} addr add ${IPv4_3}/24 dev veth3 - ip -netns ${NS3} addr add ${IPv4_4}/24 dev veth4 - ip -netns ${NS1} -6 addr add ${IPv6_1}/128 nodad dev veth1 - ip -netns ${NS2} -6 addr add ${IPv6_2}/128 nodad dev veth2 - ip -netns ${NS2} -6 addr add ${IPv6_3}/128 nodad dev veth3 - ip -netns ${NS3} -6 addr add ${IPv6_4}/128 nodad dev veth4 - - # configure addresses: the bottom route (5-6-7-8) - ip -netns ${NS1} addr add ${IPv4_5}/24 dev veth5 - ip -netns ${NS2} addr add ${IPv4_6}/24 dev veth6 - ip -netns ${NS2} addr add ${IPv4_7}/24 dev veth7 - ip -netns ${NS3} addr add ${IPv4_8}/24 dev veth8 - ip -netns ${NS1} -6 addr add ${IPv6_5}/128 nodad dev veth5 - ip -netns ${NS2} -6 addr add ${IPv6_6}/128 nodad dev veth6 - ip -netns ${NS2} -6 addr add ${IPv6_7}/128 nodad dev veth7 - ip -netns ${NS3} -6 addr add ${IPv6_8}/128 nodad dev veth8 - - ip -netns ${NS1} link set dev veth1 up - ip -netns ${NS2} link set dev veth2 up - ip -netns ${NS2} link set dev veth3 up - ip -netns ${NS3} link set dev veth4 up - ip -netns ${NS1} link set dev veth5 up - ip -netns ${NS2} link set dev veth6 up - ip -netns ${NS2} link set dev veth7 up - ip -netns ${NS3} link set dev veth8 up - - # configure routes: IP*_SRC -> veth1/IP*_2 (= top route) default; - # the bottom route to specific bottom addresses - - # NS1 - # top route - ip -netns ${NS1} route add ${IPv4_2}/32 dev veth1 ${VRF} - ip -netns ${NS1} route add default dev veth1 via ${IPv4_2} ${VRF} # go top by default - ip -netns ${NS1} -6 route add ${IPv6_2}/128 dev veth1 ${VRF} - ip -netns ${NS1} -6 route add default dev veth1 via ${IPv6_2} ${VRF} # go top by default - # bottom route - ip -netns ${NS1} route add ${IPv4_6}/32 dev veth5 ${VRF} - ip -netns ${NS1} route add ${IPv4_7}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS1} route add ${IPv4_8}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_6}/128 dev veth5 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_7}/128 dev veth5 via ${IPv6_6} ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_8}/128 dev veth5 via ${IPv6_6} ${VRF} - - # NS2 - # top route - ip -netns ${NS2} route add ${IPv4_1}/32 dev veth2 ${VRF} - ip -netns ${NS2} route add ${IPv4_4}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_1}/128 dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_4}/128 dev veth3 ${VRF} - # bottom route - ip -netns ${NS2} route add ${IPv4_5}/32 dev veth6 ${VRF} - ip -netns ${NS2} route add ${IPv4_8}/32 dev veth7 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_5}/128 dev veth6 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_8}/128 dev veth7 ${VRF} - - # NS3 - # top route - ip -netns ${NS3} route add ${IPv4_3}/32 dev veth4 - ip -netns ${NS3} route add ${IPv4_1}/32 dev veth4 via ${IPv4_3} - ip -netns ${NS3} route add ${IPv4_2}/32 dev veth4 via ${IPv4_3} - ip -netns ${NS3} -6 route add ${IPv6_3}/128 dev veth4 - ip -netns ${NS3} -6 route add ${IPv6_1}/128 dev veth4 via ${IPv6_3} - ip -netns ${NS3} -6 route add ${IPv6_2}/128 dev veth4 via ${IPv6_3} - # bottom route - ip -netns ${NS3} route add ${IPv4_7}/32 dev veth8 - ip -netns ${NS3} route add ${IPv4_5}/32 dev veth8 via ${IPv4_7} - ip -netns ${NS3} route add ${IPv4_6}/32 dev veth8 via ${IPv4_7} - ip -netns ${NS3} -6 route add ${IPv6_7}/128 dev veth8 - ip -netns ${NS3} -6 route add ${IPv6_5}/128 dev veth8 via ${IPv6_7} - ip -netns ${NS3} -6 route add ${IPv6_6}/128 dev veth8 via ${IPv6_7} - - # configure IPv4 GRE device in NS3, and a route to it via the "bottom" route - ip -netns ${NS3} tunnel add gre_dev mode gre remote ${IPv4_1} local ${IPv4_GRE} ttl 255 - ip -netns ${NS3} link set gre_dev up - ip -netns ${NS3} addr add ${IPv4_GRE} dev gre_dev - ip -netns ${NS1} route add ${IPv4_GRE}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS2} route add ${IPv4_GRE}/32 dev veth7 via ${IPv4_8} ${VRF} - - - # configure IPv6 GRE device in NS3, and a route to it via the "bottom" route - ip -netns ${NS3} -6 tunnel add name gre6_dev mode ip6gre remote ${IPv6_1} local ${IPv6_GRE} ttl 255 - ip -netns ${NS3} link set gre6_dev up - ip -netns ${NS3} -6 addr add ${IPv6_GRE} nodad dev gre6_dev - ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8} ${VRF} - - TMPFILE=$(mktemp /tmp/test_lwt_ip_encap.XXXXXX) - - sleep 1 # reduce flakiness - set +e -} - -cleanup() -{ - if [ -f ${TMPFILE} ] ; then - rm ${TMPFILE} - fi - - ip netns del ${NS1} 2> /dev/null - ip netns del ${NS2} 2> /dev/null - ip netns del ${NS3} 2> /dev/null -} - -trap cleanup EXIT - -remove_routes_to_gredev() -{ - ip -netns ${NS1} route del ${IPv4_GRE} dev veth5 ${VRF} - ip -netns ${NS2} route del ${IPv4_GRE} dev veth7 ${VRF} - ip -netns ${NS1} -6 route del ${IPv6_GRE}/128 dev veth5 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_GRE}/128 dev veth7 ${VRF} -} - -add_unreachable_routes_to_gredev() -{ - ip -netns ${NS1} route add unreachable ${IPv4_GRE}/32 ${VRF} - ip -netns ${NS2} route add unreachable ${IPv4_GRE}/32 ${VRF} - ip -netns ${NS1} -6 route add unreachable ${IPv6_GRE}/128 ${VRF} - ip -netns ${NS2} -6 route add unreachable ${IPv6_GRE}/128 ${VRF} -} - -test_ping() -{ - local readonly PROTO=$1 - local readonly EXPECTED=$2 - local RET=0 - - if [ "${PROTO}" == "IPv4" ] ; then - ip netns exec ${NS1} ping -c 1 -W 1 -I veth1 ${IPv4_DST} 2>&1 > /dev/null - RET=$? - elif [ "${PROTO}" == "IPv6" ] ; then - ip netns exec ${NS1} ping6 -c 1 -W 1 -I veth1 ${IPv6_DST} 2>&1 > /dev/null - RET=$? - else - echo " test_ping: unknown PROTO: ${PROTO}" - TEST_STATUS=1 - fi - - if [ "0" != "${RET}" ]; then - RET=1 - fi - - if [ "${EXPECTED}" != "${RET}" ] ; then - echo " test_ping failed: expected: ${EXPECTED}; got ${RET}" - TEST_STATUS=1 - fi -} - -test_gso() -{ - local readonly PROTO=$1 - local readonly PKT_SZ=5000 - local IP_DST="" - : > ${TMPFILE} # trim the capture file - - # check that nc is present - command -v nc >/dev/null 2>&1 || \ - { echo >&2 "nc is not available: skipping TSO tests"; return; } - - # listen on port 9000, capture TCP into $TMPFILE - if [ "${PROTO}" == "IPv4" ] ; then - IP_DST=${IPv4_DST} - ip netns exec ${NS3} bash -c \ - "nc -4 -l -p 9000 > ${TMPFILE} &" - elif [ "${PROTO}" == "IPv6" ] ; then - IP_DST=${IPv6_DST} - ip netns exec ${NS3} bash -c \ - "nc -6 -l -p 9000 > ${TMPFILE} &" - RET=$? - else - echo " test_gso: unknown PROTO: ${PROTO}" - TEST_STATUS=1 - fi - sleep 1 # let nc start listening - - # send a packet larger than MTU - ip netns exec ${NS1} bash -c \ - "dd if=/dev/zero bs=$PKT_SZ count=1 > /dev/tcp/${IP_DST}/9000 2>/dev/null" - sleep 2 # let the packet get delivered - - # verify we received all expected bytes - SZ=$(stat -c %s ${TMPFILE}) - if [ "$SZ" != "$PKT_SZ" ] ; then - echo " test_gso failed: ${PROTO}" - TEST_STATUS=1 - fi -} - -test_egress() -{ - local readonly ENCAP=$1 - echo "starting egress ${ENCAP} encap test ${VRF}" - setup - - # by default, pings work - test_ping IPv4 0 - test_ping IPv6 0 - - # remove NS2->DST routes, ping fails - ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF} - test_ping IPv4 1 - test_ping IPv6 1 - - # install replacement routes (LWT/eBPF), pings succeed - if [ "${ENCAP}" == "IPv4" ] ; then - ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre dev veth1 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre dev veth1 ${VRF} - elif [ "${ENCAP}" == "IPv6" ] ; then - ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF} - else - echo " unknown encap ${ENCAP}" - TEST_STATUS=1 - fi - test_ping IPv4 0 - test_ping IPv6 0 - - # skip GSO tests with VRF: VRF routing needs properly assigned - # source IP/device, which is easy to do with ping and hard with dd/nc. - if [ -z "${VRF}" ] ; then - test_gso IPv4 - test_gso IPv6 - fi - - # a negative test: remove routes to GRE devices: ping fails - remove_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - # another negative test - add_unreachable_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - cleanup - process_test_results -} - -test_ingress() -{ - local readonly ENCAP=$1 - echo "starting ingress ${ENCAP} encap test ${VRF}" - setup - - # need to wait a bit for IPv6 to autoconf, otherwise - # ping6 sometimes fails with "unable to bind to address" - - # by default, pings work - test_ping IPv4 0 - test_ping IPv6 0 - - # remove NS2->DST routes, pings fail - ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF} - test_ping IPv4 1 - test_ping IPv6 1 - - # install replacement routes (LWT/eBPF), pings succeed - if [ "${ENCAP}" == "IPv4" ] ; then - ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre dev veth2 ${VRF} - elif [ "${ENCAP}" == "IPv6" ] ; then - ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF} - else - echo "FAIL: unknown encap ${ENCAP}" - TEST_STATUS=1 - fi - test_ping IPv4 0 - test_ping IPv6 0 - - # a negative test: remove routes to GRE devices: ping fails - remove_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - # another negative test - add_unreachable_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - cleanup - process_test_results -} - -VRF="" -test_egress IPv4 -test_egress IPv6 -test_ingress IPv4 -test_ingress IPv6 - -VRF="vrf red" -test_egress IPv4 -test_egress IPv6 -test_ingress IPv4 -test_ingress IPv6 - -print_test_summary_and_exit --- base-commit: 5fd21aaac37919abc5c5d0df1eb06a9f02518f27 change-id: 20250206-lwt_ip-b6a91d2787bf Best regards, -- Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com>

7 months, 1 week

2
1
0 0

[PATCH] selftests/nolibc: stop testing constructor order

by Thomas Weißschuh

The execution order of constructors in undefined and depends on the toolchain. While recent toolchains seems to have a stable order, it doesn't work for older ones and may also change at any time. Stop validating the order and instead only validate that all constructors are executed. Reported-by: Willy Tarreau <w(a)1wt.eu> Closes: https://lore.kernel.org/lkml/20250301110735.GA18621@1wt.eu/ Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- tools/testing/selftests/nolibc/nolibc-test-linkage.c | 6 +++--- tools/testing/selftests/nolibc/nolibc-test.c | 8 ++++---- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/nolibc/nolibc-test-linkage.c b/tools/testing/selftests/nolibc/nolibc-test-linkage.c index 5ff4c8a1db2a46cf3f8cb55bdabaa5e8819b344c..a7ca8325863face9cd4134a717fe4c7761bdeb7f 100644 --- a/tools/testing/selftests/nolibc/nolibc-test-linkage.c +++ b/tools/testing/selftests/nolibc/nolibc-test-linkage.c @@ -11,16 +11,16 @@ void *linkage_test_errno_addr(void) return &errno; } -int linkage_test_constructor_test_value; +int linkage_test_constructor_test_value = 0; __attribute__((constructor)) static void constructor1(void) { - linkage_test_constructor_test_value = 2; + linkage_test_constructor_test_value |= 1 << 0; } __attribute__((constructor)) static void constructor2(void) { - linkage_test_constructor_test_value *= 3; + linkage_test_constructor_test_value |= 1 << 1; } diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index a5abf16dbfe0f2aed286964fdfc391bc6201ef3b..5884a891c491544050fc35b07322c73a1a9dbaf3 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -692,14 +692,14 @@ int expect_strtox(int llen, void *func, const char *input, int base, intmax_t ex __attribute__((constructor)) static void constructor1(void) { - constructor_test_value = 1; + constructor_test_value |= 1 << 0; } __attribute__((constructor)) static void constructor2(int argc, char **argv, char **envp) { if (argc && argv && envp) - constructor_test_value *= 2; + constructor_test_value |= 1 << 1; } int run_startup(int min, int max) @@ -738,9 +738,9 @@ int run_startup(int min, int max) CASE_TEST(environ_HOME); EXPECT_PTRNZ(1, getenv("HOME")); break; CASE_TEST(auxv_addr); EXPECT_PTRGT(test_auxv != (void *)-1, test_auxv, brk); break; CASE_TEST(auxv_AT_UID); EXPECT_EQ(1, getauxval(AT_UID), getuid()); break; - CASE_TEST(constructor); EXPECT_EQ(is_nolibc, constructor_test_value, 2); break; + CASE_TEST(constructor); EXPECT_EQ(is_nolibc, constructor_test_value, 0x3); break; CASE_TEST(linkage_errno); EXPECT_PTREQ(1, linkage_test_errno_addr(), &errno); break; - CASE_TEST(linkage_constr); EXPECT_EQ(is_nolibc, linkage_test_constructor_test_value, 6); break; + CASE_TEST(linkage_constr); EXPECT_EQ(1, linkage_test_constructor_test_value, 0x3); break; case __LINE__: return ret; /* must be last */ /* note: do not set any defaults so as to permit holes above */ --- base-commit: 6e406202a44a1a37176da0333cec10d5320c4b33 change-id: 20250306-nolibc-constructor-order-6921e8c93591 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

7 months, 1 week

2
1
0 0

[PATCH v2] selftests: livepatch: test if ftrace can trace a livepatched function

by Filipe Xavier

This new test makes sure that ftrace can trace a function that was introduced by a livepatch. Signed-off-by: Filipe Xavier <felipeaggger(a)gmail.com> --- Changes in v2: - functions.sh: added reset tracing on push and pop_config. - test-ftrace.sh: enabled tracing_on before test init. - nitpick: added double quotations on filenames and fixed some wording. - Link to v1: https://lore.kernel.org/r/20250102-ftrace-selftest-livepatch-v1-1-84880baef… --- tools/testing/selftests/livepatch/functions.sh | 14 ++++++++++ tools/testing/selftests/livepatch/test-ftrace.sh | 33 ++++++++++++++++++++++++ 2 files changed, 47 insertions(+) diff --git a/tools/testing/selftests/livepatch/functions.sh b/tools/testing/selftests/livepatch/functions.sh index e5d06fb402335d85959bafe099087effc6ddce12..e6c13514002dae5f8d7461f90b8241ab43024ea4 100644 --- a/tools/testing/selftests/livepatch/functions.sh +++ b/tools/testing/selftests/livepatch/functions.sh @@ -62,6 +62,9 @@ function push_config() { awk -F'[: ]' '{print "file " $1 " line " $2 " " $4}') FTRACE_ENABLED=$(sysctl --values kernel.ftrace_enabled) KPROBE_ENABLED=$(cat "$SYSFS_KPROBES_DIR/enabled") + TRACING_ON=$(cat "$SYSFS_DEBUG_DIR/tracing/tracing_on") + CURRENT_TRACER=$(cat "$SYSFS_DEBUG_DIR/tracing/current_tracer") + FTRACE_FILTER=$(cat "$SYSFS_DEBUG_DIR/tracing/set_ftrace_filter") } function pop_config() { @@ -74,6 +77,17 @@ function pop_config() { if [[ -n "$KPROBE_ENABLED" ]]; then echo "$KPROBE_ENABLED" > "$SYSFS_KPROBES_DIR/enabled" fi + if [[ -n "$TRACING_ON" ]]; then + echo "$TRACING_ON" > "$SYSFS_DEBUG_DIR/tracing/tracing_on" + fi + if [[ -n "$CURRENT_TRACER" ]]; then + echo "$CURRENT_TRACER" > "$SYSFS_DEBUG_DIR/tracing/current_tracer" + fi + if [[ "$FTRACE_FILTER" == *"#"* ]]; then + echo > "$SYSFS_DEBUG_DIR/tracing/set_ftrace_filter" + elif [[ -n "$FTRACE_FILTER" ]]; then + echo "$FTRACE_FILTER" > "$SYSFS_DEBUG_DIR/tracing/set_ftrace_filter" + fi } function set_dynamic_debug() { diff --git a/tools/testing/selftests/livepatch/test-ftrace.sh b/tools/testing/selftests/livepatch/test-ftrace.sh index fe14f248913acbec46fb6c0fec38a2fc84209d39..66af5d726c52e48e5177804e182b4ff31784d5ac 100755 --- a/tools/testing/selftests/livepatch/test-ftrace.sh +++ b/tools/testing/selftests/livepatch/test-ftrace.sh @@ -61,4 +61,37 @@ livepatch: '$MOD_LIVEPATCH': unpatching complete % rmmod $MOD_LIVEPATCH" +# - verify livepatch can load +# - check if traces have a patched function +# - unload livepatch and reset trace + +start_test "trace livepatched function and check that the live patch remains in effect" + +TRACE_FILE="$SYSFS_DEBUG_DIR/tracing/trace" +FUNCTION_NAME="livepatch_cmdline_proc_show" + +load_lp $MOD_LIVEPATCH + +echo 1 > "$SYSFS_DEBUG_DIR/tracing/tracing_on" +echo $FUNCTION_NAME > "$SYSFS_DEBUG_DIR/tracing/set_ftrace_filter" +echo "function" > "$SYSFS_DEBUG_DIR/tracing/current_tracer" +echo "" > "$TRACE_FILE" + +if [[ "$(cat /proc/cmdline)" != "$MOD_LIVEPATCH: this has been live patched" ]] ; then + echo -e "FAIL\n\n" + die "livepatch kselftest(s) failed" +fi + +grep -q $FUNCTION_NAME "$TRACE_FILE" +FOUND=$? + +disable_lp $MOD_LIVEPATCH +unload_lp $MOD_LIVEPATCH + +if [ "$FOUND" -eq 1 ]; then + echo -e "FAIL\n\n" + die "livepatch kselftest(s) failed" +fi + + exit 0 --- base-commit: fc033cf25e612e840e545f8d5ad2edd6ba613ed5 change-id: 20250101-ftrace-selftest-livepatch-161fb77dbed8 Best regards, -- Filipe Xavier <felipeaggger(a)gmail.com>

7 months, 1 week

4
4
0 0

[PATCH v3 1/5] tools/nolibc: add support for openat(2)

by Louis Taylor

openat is useful to avoid needing to construct relative paths, so expose a wrapper for using it directly. Signed-off-by: Louis Taylor <louis(a)kragniz.eu> --- tools/include/nolibc/sys.h | 25 ++++++++++++++++++++ tools/testing/selftests/nolibc/nolibc-test.c | 17 +++++++++++++ 2 files changed, 42 insertions(+) diff --git a/tools/include/nolibc/sys.h b/tools/include/nolibc/sys.h index 8f44c33b1213..3cd938f9abda 100644 --- a/tools/include/nolibc/sys.h +++ b/tools/include/nolibc/sys.h @@ -765,6 +765,31 @@ int mount(const char *src, const char *tgt, return __sysret(sys_mount(src, tgt, fst, flags, data)); } +/* + * int openat(int dirfd, const char *path, int flags[, mode_t mode]); + */ + +static __attribute__((unused)) +int sys_openat(int dirfd, const char *path, int flags, mode_t mode) +{ + return my_syscall4(__NR_openat, dirfd, path, flags, mode); +} + +static __attribute__((unused)) +int openat(int dirfd, const char *path, int flags, ...) +{ + mode_t mode = 0; + + if (flags & O_CREAT) { + va_list args; + + va_start(args, flags); + mode = va_arg(args, mode_t); + va_end(args); + } + + return __sysret(sys_openat(dirfd, path, flags, mode)); +} /* * int open(const char *path, int flags[, mode_t mode]); diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index 79c3e6a845f3..e8faddcecf9d 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -1028,6 +1028,22 @@ int test_rlimit(void) return 0; } +int test_openat(void) +{ + int dev, null; + + dev = openat(AT_FDCWD, "/dev", O_DIRECTORY); + if (dev < 0) + return -1; + + null = openat(dev, "null", O_RDONLY); + close(dev); + if (null < 0) + return -1; + + close(null); + return 0; +} /* Run syscall tests between IDs <min> and <max>. * Return 0 on success, non-zero on failure. @@ -1116,6 +1132,7 @@ int run_syscall(int min, int max) CASE_TEST(mmap_munmap_good); EXPECT_SYSZR(1, test_mmap_munmap()); break; CASE_TEST(open_tty); EXPECT_SYSNE(1, tmp = open("/dev/null", 0), -1); if (tmp != -1) close(tmp); break; CASE_TEST(open_blah); EXPECT_SYSER(1, tmp = open("/proc/self/blah", 0), -1, ENOENT); if (tmp != -1) close(tmp); break; + CASE_TEST(openat_dir); EXPECT_SYSZR(1, test_openat()); break; CASE_TEST(pipe); EXPECT_SYSZR(1, test_pipe()); break; CASE_TEST(poll_null); EXPECT_SYSZR(1, poll(NULL, 0, 0)); break; CASE_TEST(poll_stdout); EXPECT_SYSNE(1, ({ struct pollfd fds = { 1, POLLOUT, 0}; poll(&fds, 1, 0); }), -1); break; -- 2.45.2

7 months, 1 week

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror March 2025