April 2025 - Linux-kselftest-mirror

[PATCH v4 net-next 00/15] AccECN protocol patch series

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Plese find the v4: v4 (18-Apr-2025) - Fix 32-bit ARM assertion for alignment reuirement (Simon Horman <horms(a)kernel.org>) v3 (14-Apr-2025) - Fix patch apply issue in v2 (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Mar-2025) - Add one missing patch from previous AccECN protocol preparation patch series to this patch series The full patch series can be found in https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28 Best regards, Chia-Yu Chia-Yu Chang (1): tcp: accecn: AccECN option failure handling Ilpo Järvinen (14): tcp: reorganize SYN ECN code tcp: fast path functions later tcp: AccECN core tcp: accecn: AccECN negotiation tcp: accecn: add AccECN rx byte counters tcp: accecn: AccECN needs to know delivered bytes tcp: allow embedding leftover into option padding tcp: sack option handling improvements tcp: accecn: AccECN option tcp: accecn: AccECN option send control tcp: accecn: AccECN option ceb/cep heuristic tcp: accecn: AccECN ACE field multi-wrap heuristic tcp: accecn: try to fit AccECN option with SACK tcp: try to avoid safer when ACKs are thinned include/linux/tcp.h | 27 +- include/net/netns/ipv4.h | 2 + include/net/tcp.h | 198 +++++++++++-- include/uapi/linux/tcp.h | 7 + net/ipv4/syncookies.c | 3 + net/ipv4/sysctl_net_ipv4.c | 19 ++ net/ipv4/tcp.c | 26 +- net/ipv4/tcp_input.c | 591 +++++++++++++++++++++++++++++++++++-- net/ipv4/tcp_ipv4.c | 5 +- net/ipv4/tcp_minisocks.c | 92 +++++- net/ipv4/tcp_output.c | 302 +++++++++++++++++-- net/ipv6/syncookies.c | 1 + net/ipv6/tcp_ipv6.c | 1 + 13 files changed, 1178 insertions(+), 96 deletions(-) -- 2.34.1

6 months

4
21
0 0

[PATCH v11 net-next 0/5] DUALPI2 patch

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find the reposted DualPI2 patch v11. v11 (15-Apr-2025) - Replace hstimer_init with hstimer_setup in sch_dualpi2.c v10 (25-Mar-2025) - Remove leftover include in include/linux/netdevice.h and anonimous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Use kfree_skb_reason() and add SKB_DROP_REASON_DUALPI2_STEP_DROP drop reason (Paolo Abeni <pabeni(a)redhat.com>) - Split sch_dualpi2.c into 3 patches (and overall 5 patches): Struct definition & parsing, Dump stats & configuration, Enqueue/Dequeue (Paolo Abeni <pabeni(a)redhat.com>) v9 (16-Mar-2025) - Fix mem_usage error in previous version - Add min_qlen_step to dualpi2 attribute as the minimum queue length in number of packets in the L-queue to start step threshold marking. In previous versions, this value was fixed to 2, so only when the queue length of the L queue was greater or equal to 2 packets step threshold was applied to mark packets in the L-queue. This will cause larger queuing delays for L4S traffic at low rates (<20Mbps). So we parameterize it and change the default value to 0. Comparison of tcp_1down run 'HTB 20Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 11.55 11.70 ms 350 TCP upload avg : 18.96 N/A Mbits/s 350 TCP upload sum : 18.96 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 10.81 10.70 ms 350 TCP upload avg : 18.91 N/A Mbits/s 350 TCP upload sum : 18.91 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 12.61 12.80 ms 350 TCP upload avg : 9.48 N/A Mbits/s 350 TCP upload sum : 9.48 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.06 10.80 ms 350 TCP upload avg : 9.43 N/A Mbits/s 350 TCP upload sum : 9.43 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 40.86 37.45 ms 350 TCP upload avg : 0.88 N/A Mbits/s 350 TCP upload sum : 0.88 N/A Mbits/s 350 TCP upload::1 : 0.88 0.97 Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.07 10.40 ms 350 TCP upload avg : 0.55 N/A Mbits/s 350 TCP upload sum : 0.55 N/A Mbits/s 350 TCP upload::1 : 0.55 0.59 Mbits/s 350 v8 (11-Mar-2025) - Fix warning messages in v7 v7 (07-Mar-2025) - Separate into 3 patches to avoid mixing changes of documentation, selftest, and code. (Cong Wang <xiyou.wangcong(a)gmail.com>) v6 (04-Mar-2025) - Add modprobe for dulapi2 in tc-testing script tc-testing/tdc.sh (Jakub Kicinski <kuba(a)kernel.org>) - Update test cases in dualpi2.json - Update commit message v5 (22-Feb-2025) - A comparison was done between MQ + DUALPI2, MQ + FQ_PIE, MQ + FQ_CODEL: Unshaped 1gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 - Summary of tcp_4down run 'MQ + FQ_PIE' avg median # data pts Ping (ms) ICMP : 1.21 1.37 ms 350 TCP download avg : 235.42 N/A Mbits/s 350 TCP download sum : 941.61 N/A Mbits/s 350 TCP download::1 : 232.54 233.13 Mbits/s 350 TCP download::2 : 232.52 232.80 Mbits/s 350 TCP download::3 : 233.14 233.78 Mbits/s 350 TCP download::4 : 243.41 241.48 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2' avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 Unshaped 1gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 Unshaped 10gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 0.22 0.23 ms 350 TCP download avg : 2354.08 N/A Mbits/s 350 TCP download sum : 9416.31 N/A Mbits/s 350 TCP download::1 : 2353.65 2352.81 Mbits/s 350 TCP download::2 : 2354.54 2354.21 Mbits/s 350 TCP download::3 : 2353.56 2353.78 Mbits/s 350 TCP download::4 : 2354.56 2354.45 Mbits/s 350 - Summary of tcp_4down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 0.20 0.19 ms 350 TCP download avg : 2354.76 N/A Mbits/s 350 TCP download sum : 9419.04 N/A Mbits/s 350 TCP download::1 : 2354.77 2353.89 Mbits/s 350 TCP download::2 : 2353.41 2354.29 Mbits/s 350 TCP download::3 : 2356.18 2354.19 Mbits/s 350 TCP download::4 : 2354.68 2353.15 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 0.24 0.24 ms 350 TCP download avg : 2354.11 N/A Mbits/s 350 TCP download sum : 9416.43 N/A Mbits/s 350 TCP download::1 : 2354.75 2353.93 Mbits/s 350 TCP download::2 : 2353.15 2353.75 Mbits/s 350 TCP download::3 : 2353.49 2353.72 Mbits/s 350 TCP download::4 : 2355.04 2353.73 Mbits/s 350 Unshaped 10gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 7.57 8.69 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9467.82 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 7.82 8.91 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9468.42 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 6.87 7.93 ms 350 TCP download avg : 73.95 N/A Mbits/s 350 TCP download sum : 9465.87 N/A Mbits/s 350 From the results shown above, we see small differences between combinations. - Update commit message to include results of no_split_gso and split_gso (Dave Taht <dave.taht(a)gmail.com> and Paolo Abeni <pabeni(a)redhat.com>) - Add memlimit in dualpi2 attribute, and add memory_used, max_memory_used, memory_limit in dualpi2 stats (Dave Taht <dave.taht(a)gmail.com>) - Update note in sch_dualpi2.c related to BBRv3 status (Dave Taht <dave.taht(a)gmail.com>) - Update license identifier (Dave Taht <dave.taht(a)gmail.com>) - Add selftest in tools/testing/selftests/tc-testing (Cong Wang <xiyou.wangcong(a)gmail.com>) - Use netlink policies for parameter checks (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Modify texts & fix typos in Documentation/netlink/specs/tc.yaml (Dave Taht <dave.taht(a)gmail.com>) - Add dscsriptions of packet counter statistics and reset function of sch_dualpi2.c - Fix step_thresh in packets - Update code comments in sch_dualpi2.c v4 (22-Oct-2024) - Update statement in Kconfig for DualPI2 (Stephen Hemminger <stephen(a)networkplumber.org>) - Put a blank line after #define in sch_dualpi2.c (Stephen Hemminger <stephen(a)networkplumber.org>) - Fix line length warning v3 (19-Oct-2024) - Fix compilaiton error - Update Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Oct-2024) - Add Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) - Use dualpi2 instead of skb prefix (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Replace nla_parse_nested_deprecated with nla_parse_nested (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Fix line length warning For more details of DualPI2, plesae refer IETF RFC9332 (https://datatracker.ietf.org/doc/html/rfc9332). Best regards, Chia-Yu Chia-Yu Chang (4): Documentation: netlink: specs: tc: Add DualPI2 specification selftests/tc-testing: Add selftests for qdisc DualPI2 sched: Struct definition and parsing of dualpi2 qdisc sched: Dump configuration and statistics of dualpi2 qdisc Koen De Schepper (1): sched: Add enqueue/dequeue of dualpi2 qdisc Documentation/netlink/specs/tc.yaml | 144 +++ include/net/dropreason-core.h | 6 + include/uapi/linux/pkt_sched.h | 39 + net/sched/Kconfig | 12 + net/sched/Makefile | 1 + net/sched/sch_dualpi2.c | 1091 +++++++++++++++++ tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/dualpi2.json | 149 +++ tools/testing/selftests/tc-testing/tdc.sh | 1 + 9 files changed, 1444 insertions(+) create mode 100644 net/sched/sch_dualpi2.c create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/dualpi2.json -- 2.34.1

6 months

5
17
0 0

[PATCH v2] lib: PRIME_NUMBERS_KUNIT_TEST should not select PRIME_NUMBERS

by Geert Uytterhoeven

Enabling a (modular) test should not silently enable additional kernel functionality, as that may increase the attack vector of a product. Fix this by making PRIME_NUMBERS_KUNIT_TEST depend on PRIME_NUMBERS instead of selecting it. After this, one can safely enable CONFIG_KUNIT_ALL_TESTS=m to build modules for all appropriate tests for ones system, without pulling in extra unwanted functionality, while still allowing a tester to manually enable PRIME_NUMBERS and this test suite on a system where PRIME_NUMBERS is not enabled by default. Resurrect CONFIG_PRIME_NUMBERS=m in tools/testing/selftests/lib/config for the latter use case. Fixes: 313b38a6ecb46db4 ("lib/prime_numbers: convert self-test to KUnit") Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> Acked-by: Tamir Duberstein <tamird(a)gmail.com> --- v2: - Add Acked-by, - Resurrect CONFIG_PRIME_NUMBERS=m in tools/testing/selftests/lib/config. --- lib/Kconfig.debug | 2 +- tools/testing/selftests/lib/config | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 4060a89866626c0a..51722f5d041970aa 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -3326,7 +3326,7 @@ config GCD_KUNIT_TEST config PRIME_NUMBERS_KUNIT_TEST tristate "Prime number generator test" if !KUNIT_ALL_TESTS depends on KUNIT - select PRIME_NUMBERS + depends on PRIME_NUMBERS default KUNIT_ALL_TESTS help This option enables the KUnit test suite for the {is,next}_prime_number diff --git a/tools/testing/selftests/lib/config b/tools/testing/selftests/lib/config index 81a1f64a22e860a6..377b3699ff312933 100644 --- a/tools/testing/selftests/lib/config +++ b/tools/testing/selftests/lib/config @@ -1,2 +1,3 @@ CONFIG_TEST_BITMAP=m +CONFIG_PRIME_NUMBERS=m CONFIG_TEST_BITOPS=m -- 2.43.0

6 months

3
4
0 0

[PATCH v9 0/6] rust: reduce `as` casts, enable related lints

by Tamir Duberstein

This started with a patch that enabled `clippy::ptr_as_ptr`. Benno Lossin suggested I also look into `clippy::ptr_cast_constness` and I discovered `clippy::as_ptr_cast_mut`. This series now enables all 3 lints. It also enables `clippy::as_underscore` which ensures other pointer casts weren't missed. As a later addition, `clippy::cast_lossless` and `clippy::ref_as_ptr` are also enabled. This series depends on "rust: retain pointer mut-ness in `container_of!`"[1]. Link: https://lore.kernel.org/all/20250409-container-of-mutness-v1-1-64f472b94534… [1] Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v9: - Replace ref-to-ptr coercion using `let` bindings with `core::ptr::from_{ref,mut}`. (Boqun Feng). - Link to v8: https://lore.kernel.org/r/20250409-ptr-as-ptr-v8-0-3738061534ef@gmail.com Changes in v8: - Use coercion to go ref -> ptr. - rustfmt. - Rebase on v6.15-rc1. - Extract first commit to its own series as it is shared with other series. - Link to v7: https://lore.kernel.org/r/20250325-ptr-as-ptr-v7-0-87ab452147b9@gmail.com Changes in v7: - Add patch to enable `clippy::ref_as_ptr`. - Link to v6: https://lore.kernel.org/r/20250324-ptr-as-ptr-v6-0-49d1b7fd4290@gmail.com Changes in v6: - Drop strict provenance patch. - Fix URLs in doc comments. - Add patch to enable `clippy::cast_lossless`. - Rebase on rust-next. - Link to v5: https://lore.kernel.org/r/20250317-ptr-as-ptr-v5-0-5b5f21fa230a@gmail.com Changes in v5: - Use `pointer::addr` in OF. (Boqun Feng) - Add documentation on stubs. (Benno Lossin) - Mark stubs `#[inline]`. - Pick up Alice's RB on a shared commit from https://lore.kernel.org/all/Z9f-3Aj3_FWBZRrm@google.com/. - Link to v4: https://lore.kernel.org/r/20250315-ptr-as-ptr-v4-0-b2d72c14dc26@gmail.com Changes in v4: - Add missing SoB. (Benno Lossin) - Use `without_provenance_mut` in alloc. (Boqun Feng) - Limit strict provenance lints to the `kernel` crate to avoid complex logic in the build system. This can be revisited on MSRV >= 1.84.0. - Rebase on rust-next. - Link to v3: https://lore.kernel.org/r/20250314-ptr-as-ptr-v3-0-e7ba61048f4a@gmail.com Changes in v3: - Fixed clippy warning in rust/kernel/firmware.rs. (kernel test robot) Link: https://lore.kernel.org/all/202503120332.YTCpFEvv-lkp@intel.com/ - s/as u64/as bindings::phys_addr_t/g. (Benno Lossin) - Use strict provenance APIs and enable lints. (Benno Lossin) - Link to v2: https://lore.kernel.org/r/20250309-ptr-as-ptr-v2-0-25d60ad922b7@gmail.com Changes in v2: - Fixed typo in first commit message. - Added additional patches, converted to series. - Link to v1: https://lore.kernel.org/r/20250307-ptr-as-ptr-v1-1-582d06514c98@gmail.com --- Tamir Duberstein (6): rust: enable `clippy::ptr_as_ptr` lint rust: enable `clippy::ptr_cast_constness` lint rust: enable `clippy::as_ptr_cast_mut` lint rust: enable `clippy::as_underscore` lint rust: enable `clippy::cast_lossless` lint rust: enable `clippy::ref_as_ptr` lint Makefile | 6 ++++++ drivers/gpu/drm/drm_panic_qr.rs | 2 +- rust/bindings/lib.rs | 3 +++ rust/kernel/alloc/allocator_test.rs | 2 +- rust/kernel/alloc/kvec.rs | 4 ++-- rust/kernel/block/mq/operations.rs | 2 +- rust/kernel/block/mq/request.rs | 6 +++--- rust/kernel/device.rs | 4 ++-- rust/kernel/device_id.rs | 4 ++-- rust/kernel/devres.rs | 19 ++++++++++--------- rust/kernel/dma.rs | 6 +++--- rust/kernel/error.rs | 2 +- rust/kernel/firmware.rs | 3 ++- rust/kernel/fs/file.rs | 2 +- rust/kernel/io.rs | 18 +++++++++--------- rust/kernel/kunit.rs | 11 +++++++---- rust/kernel/list/impl_list_item_mod.rs | 2 +- rust/kernel/miscdevice.rs | 2 +- rust/kernel/net/phy.rs | 4 ++-- rust/kernel/of.rs | 6 +++--- rust/kernel/pci.rs | 11 +++++++---- rust/kernel/platform.rs | 4 +++- rust/kernel/print.rs | 6 +++--- rust/kernel/seq_file.rs | 2 +- rust/kernel/str.rs | 14 +++++++------- rust/kernel/sync/poll.rs | 2 +- rust/kernel/time/hrtimer/pin.rs | 2 +- rust/kernel/time/hrtimer/pin_mut.rs | 2 +- rust/kernel/uaccess.rs | 4 ++-- rust/kernel/workqueue.rs | 12 ++++++------ rust/uapi/lib.rs | 3 +++ 31 files changed, 96 insertions(+), 74 deletions(-) --- base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8 change-id: 20250307-ptr-as-ptr-21b1867fc4d4 prerequisite-change-id: 20250409-container-of-mutness-b153dab4388d:v1 prerequisite-patch-id: 53d5889db599267f87642bb0ae3063c29bc24863 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

6 months

3
23
0 0

[PATCH v7 0/2] memcg: Fix test_memcg_min/low test failures

by Waiman Long

v7: - Skip the vmscan change as the mem_cgroup_usage() check for now as it is currently redundant. v6: - The memcg_test_low failure is indeed due to the memory_recursiveprot mount option which is enabled by default in systemd cgroup v2 setting. So adopt Michal's suggestion to adjust the low event checking according to whether memory_recursiveprot is enabled or not. v5: - Use mem_cgroup_usage() in patch 1 as originally suggested by Johannes. The test_memcontrol selftest consistently fails its test_memcg_low sub-test (with memory_recursiveprot enabled) and sporadically fails its test_memcg_min sub-test. This patchset fixes the test_memcg_min and test_memcg_low failures by adjusting the test_memcontrol selftest to fix these test failures. Waiman Long (2): selftests: memcg: Allow low event with no memory.low and memory_recursiveprot on selftests: memcg: Increase error tolerance of child memory.current check in test_memcg_protection() .../selftests/cgroup/test_memcontrol.c | 20 ++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) -- 2.49.0

6 months

3
5
0 0

[PATCH 0/4] mm: permit guard regions for file-backed/shmem mappings

by Lorenzo Stoakes

The guard regions feature was initially implemented to support anonymous mappings only, excluding shmem. This was done such as to introduce the feature carefully and incrementally and to be conservative when considering the various caveats and corner cases that are applicable to file-backed mappings but not to anonymous ones. Now this feature has landed in 6.13, it is time to revisit this and to extend this functionality to file-backed and shmem mappings. In order to make this maximally useful, and since one may map file-backed mappings read-only (for instance ELF images), we also remove the restriction on read-only mappings and permit the establishment of guard regions in any non-hugetlb, non-mlock()'d mapping. It is permissible to permit the establishment of guard regions in read-only mappings because the guard regions only reduce access to the mapping, and when removed simply reinstate the existing attributes of the underlying VMA, meaning no access violations can occur. While the change in kernel code introduced in this series is small, the majority of the effort here is spent in extending the testing to assert that the feature works correctly across numerous file-backed mapping scenarios. Every single guard region self-test performed against anonymous memory (which is relevant and not anon-only) has now been updated to also be performed against shmem and a mapping of a file in the working directory. This confirms that all cases also function correctly for file-backed guard regions. In addition a number of other tests are added for specific file-backed mapping scenarios. There are a number of other concerns that one might have with regard to guard regions, addressed below: Readahead ~~~~~~~~~ Readahead is a process through which the page cache is populated on the assumption that sequential reads will occur, thus amortising I/O and, through a clever use of the PG_readahead folio flag establishing during major fault and checked upon minor fault, provides for asynchronous I/O to occur as dat is processed, reducing I/O stalls as data is faulted in. Guard regions do not alter this mechanism which operations at the folio and fault level, but do of course prevent the faulting of folios that would otherwise be mapped. In the instance of a major fault prior to a guard region, synchronous readahead will occur including populating folios in the page cache which the guard regions will, in the case of the mapping in question, prevent access to. In addition, if PG_readahead is placed in a folio that is now inaccessible, this will prevent asynchronous readahead from occurring as it would otherwise do. However, there are mechanisms for heuristically resetting this within readahead regardless, which will 'recover' correct readahead behaviour. Readahead presumes sequential data access, the presence of a guard region clearly indicates that, at least in the guard region, no such sequential access will occur, as it cannot occur there. So this should have very little impact on any real workload. The far more important point is as to whether readahead causes incorrect or inappropriate mapping of ranges disallowed by the presence of guard regions - this is not the case, as readahead does not 'pre-fault' memory in this fashion. At any rate, any mechanism which would attempt to do so would hit the usual page fault paths, which correctly handle PTE markers as with anonymous mappings. Fault-Around ~~~~~~~~~~~~ The fault-around logic, in a similar vein to readahead, attempts to improve efficiency with regard to file-backed memory mappings, however it differs in that it does not try to fetch folios into the page cache that are about to be accessed, but rather pre-maps a range of folios around the faulting address. Guard regions making use of PTE markers makes this relatively trivial, as this case is already handled - see filemap_map_folio_range() and filemap_map_order0_folio() - in both instances, the solution is to simply keep the established page table mappings and let the fault handler take care of PTE markers, as per the comment: /* * NOTE: If there're PTE markers, we'll leave them to be * handled in the specific fault path, and it'll prohibit * the fault-around logic. */ This works, as establishing guard regions results in page table mappings with PTE markers, and clearing them removes them. Truncation ~~~~~~~~~~ File truncation will not eliminate existing guard regions, as the truncation operation will ultimately zap the range via unmap_mapping_range(), which specifically excludes PTE markers. Zapping ~~~~~~~ Zapping is, as with anonymous mappings, handled by zap_nonpresent_ptes(), which specifically deals with guard entries, leaving them intact except in instances such as process teardown or munmap() where they need to be removed. Reclaim ~~~~~~~ When reclaim is performed on file-backed folios, it ultimately invokes try_to_unmap_one() via the rmap. If the folio is non-large, then map_pte() will ultimately abort the operation for the guard region mapping. If large, then check_pte() will determine that this is a non-device private entry/device-exclusive entry 'swap' PTE and thus abort the operation in that instance. Therefore, no odd things happen in the instance of reclaim being attempted upon a file-backed guard region. Hole Punching ~~~~~~~~~~~~~ This updates the page cache and ultimately invokes unmap_mapping_range(), which explicitly leaves PTE markers in place. Because the establishment of guard regions zapped any existing mappings to file-backed folios, once the guard regions are removed then the hole-punched region will be faulted in as usual and everything will behave as expected. Lorenzo Stoakes (4): mm: allow guard regions in file-backed and read-only mappings selftests/mm: rename guard-pages to guard-regions tools/selftests: expand all guard region tests to file-backed tools/selftests: add file/shmem-backed mapping guard region tests mm/madvise.c | 8 +- tools/testing/selftests/mm/.gitignore | 2 +- tools/testing/selftests/mm/Makefile | 2 +- .../mm/{guard-pages.c => guard-regions.c} | 921 ++++++++++++++++-- 4 files changed, 821 insertions(+), 112 deletions(-) rename tools/testing/selftests/mm/{guard-pages.c => guard-regions.c} (58%) -- 2.48.1

6 months

7
63
0 0

Re: [PATCH bpf-next v2 05/11] bpf, arm64, powerpc: Add bpf_jit_bypass_spec_v1/v4()

by Luis Gerhorst

kernel test robot <lkp(a)intel.com> writes: > All warnings (new ones prefixed by >>): > >>> kernel/bpf/core.c:3037:13: warning: no previous prototype for 'bpf_jit_bypass_spec_v1' [-Wmissing-prototypes] > 3037 | bool __weak bpf_jit_bypass_spec_v1(void) > | ^~~~~~~~~~~~~~~~~~~~~~ >>> kernel/bpf/core.c:3042:13: warning: no previous prototype for 'bpf_jit_bypass_spec_v4' [-Wmissing-prototypes] > 3042 | bool __weak bpf_jit_bypass_spec_v4(void) > | ^~~~~~~~~~~~~~~~~~~~~~ That's because the prototypes in include/linux/bpf.h were in the #ifdef CONFIG_BPF_SYSCALL. I fixed this for v3 by moving the prototypes out of the ifdef.

6 months

1
0
0 0

[PATCH bpf-next v2 0/9] selftests/bpf: Test sockmap/sockhash redirection

by Michal Luczaj

The idea behind this series is to comprehensively test the BPF redirection: BPF_MAP_TYPE_SOCKMAP, BPF_MAP_TYPE_SOCKHASH x sk_msg-to-egress, sk_msg-to-ingress, sk_skb-to-egress, sk_skb-to-ingress x AF_INET, SOCK_STREAM, AF_INET6, SOCK_STREAM, AF_INET, SOCK_DGRAM, AF_INET6, SOCK_DGRAM, AF_UNIX, SOCK_STREAM, AF_UNIX, SOCK_DGRAM, AF_VSOCK, SOCK_STREAM, AF_VSOCK, SOCK_SEQPACKET New module is introduced, sockmap_redir: all supported and unsupported redirect combinations are tested for success and failure respectively. Code is pretty much stolen/adapted from Jakub Sitnicki's sockmap_redir_matrix.c [1]. Usage: $ cd tools/testing/selftests/bpf $ make $ sudo ./test_progs -t sockmap_redir ... Summary: 1/576 PASSED, 0 SKIPPED, 0 FAILED [1]: https://github.com/jsitnicki/sockmap-redir-matrix/blob/main/sockmap_redir_m… Changes in v2: - Verify that the unsupported redirect combos do fail [Jakub] - Dedup tests in sockmap_listen - Cosmetic changes and code reordering - Link to v1: https://lore.kernel.org/bpf/42939687-20f9-4a45-b7c2-342a0e11a014@rbox.co/ Suggested-by: Jakub Sitnicki <jakub(a)cloudflare.com> Signed-off-by: Michal Luczaj <mhal(a)rbox.co> --- Michal Luczaj (9): selftests/bpf: Support af_unix SOCK_DGRAM socket pair creation selftests/bpf: Add socket_kind_to_str() to socket_helpers selftests/bpf: Add u32()/u64() to sockmap_helpers selftests/bpf: Allow setting BPF_F_INGRESS in prog_msg_verdict() selftests/bpf: Add selftest for sockmap/hashmap redirection selftests/bpf: sockmap_listen cleanup: Drop af_vsock redir tests selftests/bpf: sockmap_listen cleanup: Drop af_unix redir tests selftests/bpf: sockmap_listen cleanup: Drop af_inet SOCK_DGRAM redir tests docs/bpf: sockmap: Add a missing comma Documentation/bpf/map_sockmap.rst | 2 +- .../selftests/bpf/prog_tests/socket_helpers.h | 84 +++- .../selftests/bpf/prog_tests/sockmap_helpers.h | 25 +- .../selftests/bpf/prog_tests/sockmap_listen.c | 459 +------------------- .../selftests/bpf/prog_tests/sockmap_redir.c | 461 +++++++++++++++++++++ .../selftests/bpf/progs/test_sockmap_listen.c | 6 +- 6 files changed, 558 insertions(+), 479 deletions(-) --- base-commit: a27a97f713947b20ba91b23a3ef77fa92d74171b change-id: 20240922-selftests-sockmap-redir-5d839396c75e Best regards, -- Michal Luczaj <mhal(a)rbox.co>

6 months, 1 week

4
21
0 0

[PATCH v9 0/5] KVM: selftests: Add LoongArch support

by Bibo Mao

--- Changes in v9: 1. Add vm mode VM_MODE_P47V47_16K, LoongArch VM uses this mode by default, rather than VM_MODE_P36V47_16K. 2. Refresh some spelling issues in changelog. Changes in v8: 1. Porting patch based on the latest version. 2. For macro PC_OFFSET_EXREGS, offsetof() method is used for C header file, still hardcoded definition for assemble language. Changes in v7: 1. Refine code to add LoongArch support in test case set_memory_region_test. Changes in v6: 1. Refresh the patch based on latest kernel 6.8-rc1, add LoongArch support about testcase set_memory_region_test. 2. Add hardware_disable_test test case. 3. Drop modification about macro DEFAULT_GUEST_TEST_MEM, it is problem of LoongArch binutils, this issue is raised to LoongArch binutils owners. Changes in v5: 1. In LoongArch kvm self tests, the DEFAULT_GUEST_TEST_MEM could be 0x130000000, it is different from the default value in memstress.h. So we Move the definition of DEFAULT_GUEST_TEST_MEM into LoongArch ucall.h, and add 'ifndef' condition for DEFAULT_GUEST_TEST_MEM in memstress.h. Changes in v4: 1. Remove the based-on flag, as the LoongArch KVM patch series have been accepted by Linux kernel, so this can be applied directly in kernel. Changes in v3: 1. Improve implementation of LoongArch VM page walk. 2. Add exception handler for LoongArch. 3. Add dirty_log_test, dirty_log_perf_test, guest_print_test test cases for LoongArch. 4. Add __ASSEMBLER__ macro to distinguish asm file and c file. 5. Move ucall_arch_do_ucall to the header file and make it as static inline to avoid function calls. 6. Change the DEFAULT_GUEST_TEST_MEM base addr for LoongArch. Changes in v2: 1. We should use ".balign 4096" to align the assemble code with 4K in exception.S instead of "align 12". 2. LoongArch only supports 3 or 4 levels page tables, so we remove the hanlders for 2-levels page table. 3. Remove the DEFAULT_LOONGARCH_GUEST_STACK_VADDR_MIN and use the common DEFAULT_GUEST_STACK_VADDR_MIN to allocate stack memory in guest. 4. Reorganize the test cases supported by LoongArch. 5. Fix some code comments. 6. Add kvm_binary_stats_test test case into LoongArch KVM selftests. --- Bibo Mao (5): KVM: selftests: Add VM_MODE_P47V47_16K vm mode KVM: selftests: Add KVM selftests header files for LoongArch KVM: selftests: Add core KVM selftests support for LoongArch KVM: selftests: Add ucall test support for LoongArch KVM: selftests: Add test cases for LoongArch tools/testing/selftests/kvm/Makefile | 2 +- tools/testing/selftests/kvm/Makefile.kvm | 18 + .../testing/selftests/kvm/include/kvm_util.h | 6 + .../kvm/include/loongarch/kvm_util_arch.h | 7 + .../kvm/include/loongarch/processor.h | 138 +++++++ .../selftests/kvm/include/loongarch/ucall.h | 20 + tools/testing/selftests/kvm/lib/kvm_util.c | 3 + .../selftests/kvm/lib/loongarch/exception.S | 59 +++ .../selftests/kvm/lib/loongarch/processor.c | 347 ++++++++++++++++++ .../selftests/kvm/lib/loongarch/ucall.c | 38 ++ .../selftests/kvm/set_memory_region_test.c | 2 +- 11 files changed, 638 insertions(+), 2 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/loongarch/kvm_util_arch.h create mode 100644 tools/testing/selftests/kvm/include/loongarch/processor.h create mode 100644 tools/testing/selftests/kvm/include/loongarch/ucall.h create mode 100644 tools/testing/selftests/kvm/lib/loongarch/exception.S create mode 100644 tools/testing/selftests/kvm/lib/loongarch/processor.c create mode 100644 tools/testing/selftests/kvm/lib/loongarch/ucall.c base-commit: 8ffd015db85fea3e15a77027fda6c02ced4d2444 -- 2.39.3

6 months, 1 week

3
9
0 0

[PATCH 12/14] torture: Add testing of RCU's Rust bindings to torture.sh

by Joel Fernandes

From: "Paul E. McKenney" <paulmck(a)kernel.org> This commit adds a --do-rcu-rust parameter to torture.sh, which invokes a rust_doctests_kernel kunit run. Note that kunit wants a clean source tree, so this runs "make mrproper", which might come as a surprise to some users. Should there be a --mrproper parameter to torture.sh to make the user explicitly ask for it? Co-developed-by: Boqun Feng <boqun.feng(a)gmail.com> Signed-off-by: Boqun Feng <boqun.feng(a)gmail.com> Signed-off-by: Paul E. McKenney <paulmck(a)kernel.org> Signed-off-by: Joel Fernandes <joelagnelf(a)nvidia.com> --- .../selftests/rcutorture/bin/torture.sh | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/tools/testing/selftests/rcutorture/bin/torture.sh b/tools/testing/selftests/rcutorture/bin/torture.sh index 475f758f6216..e03fdaca89b3 100755 --- a/tools/testing/selftests/rcutorture/bin/torture.sh +++ b/tools/testing/selftests/rcutorture/bin/torture.sh @@ -59,6 +59,7 @@ do_clocksourcewd=yes do_rt=yes do_rcutasksflavors=yes do_srcu_lockdep=yes +do_rcu_rust=no # doyesno - Helper function for yes/no arguments function doyesno () { @@ -89,6 +90,7 @@ usage () { echo " --do-rcutorture / --do-no-rcutorture / --no-rcutorture" echo " --do-refscale / --do-no-refscale / --no-refscale" echo " --do-rt / --do-no-rt / --no-rt" + echo " --do-rcu-rust / --do-no-rcu-rust / --no-rcu-rust" echo " --do-scftorture / --do-no-scftorture / --no-scftorture" echo " --do-srcu-lockdep / --do-no-srcu-lockdep / --no-srcu-lockdep" echo " --duration [ <minutes> | <hours>h | <days>d ]" @@ -191,6 +193,9 @@ do --do-rt|--do-no-rt|--no-rt) do_rt=`doyesno "$1" --do-rt` ;; + --do-rcu-rust|--do-no-rcu-rust|--no-rcu-rust) + do_rcu_rust=`doyesno "$1" --do-rcu-rust` + ;; --do-scftorture|--do-no-scftorture|--no-scftorture) do_scftorture=`doyesno "$1" --do-scftorture` ;; @@ -485,6 +490,46 @@ then torture_set "rcurttorture-exp" tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration "$duration_rcutorture" --configs "TREE03" --kconfig "CONFIG_PREEMPT_RT=y CONFIG_EXPERT=y CONFIG_HZ_PERIODIC=n CONFIG_NO_HZ_FULL=y CONFIG_RCU_NOCB_CPU=y" --trust-make fi +if test "$do_rcu_rust" = "yes" +then + echo " --- do-rcu-rust:" Start `date` | tee -a $T/log + rrdir="tools/testing/selftests/rcutorture/res/$ds/results-rcu-rust" + mkdir -p "$rrdir" + echo " --- make LLVM=1 rustavailable " | tee -a $rrdir/log > $rrdir/rustavailable.out + make LLVM=1 rustavailable > $T/rustavailable.out 2>&1 + retcode=$? + echo $retcode > $rrdir/rustavailable.exitcode + cat $T/rustavailable.out | tee -a $rrdir/log >> $rrdir/rustavailable.out 2>&1 + buildphase=rustavailable + if test "$retcode" -eq 0 + then + echo " --- Running 'make mrproper' in order to run kunit." | tee -a $rrdir/log > $rrdir/mrproper.out + make mrproper > $rrdir/mrproper.out 2>&1 + retcode=$? + echo $retcode > $rrdir/mrproper.exitcode + buildphase=mrproper + fi + if test "$retcode" -eq 0 + then + echo " --- Running rust_doctests_kernel." | tee -a $rrdir/log > $rrdir/rust_doctests_kernel.out + ./tools/testing/kunit/kunit.py run --make_options LLVM=1 --make_options CLIPPY=1 --arch arm64 --kconfig_add CONFIG_SMP=y --kconfig_add CONFIG_WERROR=y --kconfig_add CONFIG_RUST=y rust_doctests_kernel >> $rrdir/rust_doctests_kernel.out 2>&1 + # @@@ Remove "--arch arm64" in order to test on native architecture? + # @@@ Analyze $rrdir/rust_doctests_kernel.out contents? + retcode=$? + echo $retcode > $rrdir/rust_doctests_kernel.exitcode + buildphase=rust_doctests_kernel + fi + if test "$retcode" -eq 0 + then + echo "rcu-rust($retcode)" $rrdir >> $T/successes + echo Success >> $rrdir/log + else + echo "rcu-rust($retcode)" $rrdir >> $T/failures + echo " --- rcu-rust Test summary:" >> $rrdir/log + echo " --- Summary: Exit code $retcode from $buildphase, see $rrdir/$buildphase.out" >> $rrdir/log + fi +fi + if test "$do_srcu_lockdep" = "yes" then echo " --- do-srcu-lockdep:" Start `date` | tee -a $T/log -- 2.43.0

6 months, 1 week

3
9
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror April 2025