April 2025 - Linux-kselftest-mirror

[PATCH net-next v2 0/6] xfrm & bonding: Correct use of xso.real_dev

by Cosmin Ratiu

This patch series was motivated by fixing a few bugs in the bonding driver related to xfrm state migration on device failover. struct xfrm_dev_offload has two net_device pointers: dev and real_dev. The first one is the device the xfrm_state is offloaded on and the second one is used by the bonding driver to manage the underlying device xfrm_states are actually offloaded on. When bonding isn't used, the two pointers are the same. This causes confusion in drivers: Which device pointer should they use? If they want to support bonding, they need to only use real_dev and never look at dev. Furthermore, real_dev is used without proper locking from multiple code paths and changing it is dangerous. See commit [1] for example. This patch series clears things out by removing all uses of real_dev from outside the bonding driver. Then, the bonding driver is refactored to fix a couple of long standing races and the original bug which motivated this patch series. [1] commit f8cde9805981 ("bonding: fix xfrm real_dev null pointer dereference") v1 -> v2: Added missing kdoc for various functions. Made bond_ipsec_del_sa() use xso.real_dev instead of curr_active_slave. Cosmin Ratiu (6): Cleaning up unnecessary uses of xso.real_dev: net/mlx5: Avoid using xso.real_dev unnecessarily xfrm: Use xdo.dev instead of xdo.real_dev xfrm: Remove unneeded device check from validate_xmit_xfrm Refactoring device operations to get an explicit device pointer: xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free} Fixing a bonding xfrm state migration bug: bonding: Mark active offloaded xfrm_states Fixing long standing races in bonding: bonding: Fix multiple long standing offload races Documentation/networking/xfrm_device.rst | 10 +- drivers/net/bonding/bond_main.c | 113 +++++++++--------- .../net/ethernet/chelsio/cxgb4/cxgb4_main.c | 20 ++-- .../inline_crypto/ch_ipsec/chcr_ipsec.c | 18 ++- .../net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 41 ++++--- drivers/net/ethernet/intel/ixgbevf/ipsec.c | 21 ++-- .../marvell/octeontx2/nic/cn10k_ipsec.c | 18 +-- .../mellanox/mlx5/core/en_accel/ipsec.c | 28 ++--- .../mellanox/mlx5/core/en_accel/ipsec.h | 1 + .../net/ethernet/netronome/nfp/crypto/ipsec.c | 11 +- drivers/net/netdevsim/ipsec.c | 15 ++- include/linux/netdevice.h | 10 +- include/net/xfrm.h | 8 ++ net/xfrm/xfrm_device.c | 13 +- net/xfrm/xfrm_state.c | 16 +-- 15 files changed, 182 insertions(+), 161 deletions(-) -- 2.45.0

2 weeks, 4 days

3
11
0 0

[PATCH v2 00/32] kselftest harness and nolibc compatibility

by Thomas Weißschuh

Nolibc is useful for selftests as the test programs can be very small, and compiled with just a kernel crosscompiler, without userspace support. Currently nolibc is only usable with kselftest.h, not the more convenient to use kselftest_harness.h This series provides this compatibility by adding new features to nolibc and removing the usage of problematic features from the harness. The first half of the series are changes to the harness, the second one are for nolibc. Both parts are very independent and should go through different trees. The last patch is not meant to be applied and serves as test that everything works together correctly. Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- Changes in v2: - Rebase unto v6.15-rc1 - Rename internal nolibc symbols - Handle edge case of waitpid(INT_MIN) == ESRCH - Fix arm configurations for final testing patch - Clean up global getopt.h variable declarations - Add Acks from Willy - Link to v1: https://lore.kernel.org/r/20250304-nolibc-kselftest-harness-v1-0-adca7cd231… --- Thomas Weißschuh (32): selftests: harness: Add harness selftest selftests: harness: Use C89 comment style selftests: harness: Ignore unused variant argument warning selftests: harness: Mark functions without prototypes static selftests: harness: Remove inline qualifier for wrappers selftests: harness: Remove dependency on libatomic selftests: harness: Implement test timeouts through pidfd selftests: harness: Don't set setup_completed for fixtureless tests selftests: harness: Always provide "self" and "variant" selftests: harness: Move teardown conditional into test metadata selftests: harness: Add teardown callback to test metadata selftests: harness: Stop using setjmp()/longjmp() selftests: harness: Guard includes on nolibc tools/nolibc: handle intmax_t/uintmax_t in printf tools/nolibc: use intmax definitions from compiler tools/nolibc: use pselect6_time64 if available tools/nolibc: use ppoll_time64 if available tools/nolibc: add tolower() and toupper() tools/nolibc: add _exit() tools/nolibc: add setpgrp() tools/nolibc: implement waitpid() in terms of waitid() Revert "selftests/nolibc: use waitid() over waitpid()" tools/nolibc: add dprintf() and vdprintf() tools/nolibc: add getopt() tools/nolibc: allow different write callbacks in printf tools/nolibc: allow limiting of printf destination size tools/nolibc: add snprintf() and friends selftests/nolibc: use snprintf() for printf tests selftests/nolibc: rename vfprintf test suite selftests/nolibc: add test for snprintf() truncation tools/nolibc: implement width padding in printf() HACK: selftests/nolibc: demonstrate usage of the kselftest harness tools/include/nolibc/Makefile | 1 + tools/include/nolibc/getopt.h | 101 ++ tools/include/nolibc/nolibc.h | 1 + tools/include/nolibc/stdint.h | 4 +- tools/include/nolibc/stdio.h | 127 +- tools/include/nolibc/string.h | 17 + tools/include/nolibc/sys.h | 105 +- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/kselftest/.gitignore | 1 + tools/testing/selftests/kselftest/Makefile | 6 + .../testing/selftests/kselftest/harness-selftest.c | 129 ++ .../selftests/kselftest/harness-selftest.expected | 62 + .../selftests/kselftest/harness-selftest.sh | 14 + tools/testing/selftests/kselftest_harness.h | 181 +- tools/testing/selftests/nolibc/Makefile | 13 +- tools/testing/selftests/nolibc/harness-selftest.c | 1 + tools/testing/selftests/nolibc/nolibc-test.c | 1729 +------------------- tools/testing/selftests/nolibc/run-tests.sh | 2 +- 18 files changed, 635 insertions(+), 1860 deletions(-) --- base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8 change-id: 20250130-nolibc-kselftest-harness-8b2c8cac43bf Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

2 weeks, 4 days

2
37
0 0

[PATCH] firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version

by Richard Fitzgerald

Call cs_dsp_mock_xm_header_get_fw_version() to get the firmware version from the dummy XM header data in cs_dsp_bin_err_test_common_init(). Make the same change to cs_dsp_bin_test_common_init() and remove the cs_dsp_mock_xm_header_get_fw_version_from_regmap() function. The code in cs_dsp_test_bin.c was correctly calling cs_dsp_mock_xm_header_get_fw_version_from_regmap() to fetch the fw version from a dummy header it wrote to XM registers. However in cs_dsp_test_bin_error.c the test doesn't stuff a dummy header into XM, it populates it the normal way using a wmfw file. It should have called cs_dsp_mock_xm_header_get_fw_version() to get the data from its blob buffer, but was calling cs_dsp_mock_xm_header_get_fw_version_from_regmap(). As nothing had been written to the registers this returned the value of uninitialized data. The only other use of cs_dsp_mock_xm_header_get_fw_version_from_regmap() was cs_dsp_test_bin.c, but it doesn't need to use it. It already has a blob buffer containing the dummy XM header so it can use cs_dsp_mock_xm_header_get_fw_version() to read from that. Fixes: cd8c058499b6 ("firmware: cs_dsp: Add KUnit testing of bin error cases") Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- .../cirrus/test/cs_dsp_mock_mem_maps.c | 30 ------------------- .../firmware/cirrus/test/cs_dsp_test_bin.c | 2 +- .../cirrus/test/cs_dsp_test_bin_error.c | 2 +- .../linux/firmware/cirrus/cs_dsp_test_utils.h | 1 - 4 files changed, 2 insertions(+), 33 deletions(-) diff --git a/drivers/firmware/cirrus/test/cs_dsp_mock_mem_maps.c b/drivers/firmware/cirrus/test/cs_dsp_mock_mem_maps.c index 161272e47bda..73412bcef50c 100644 --- a/drivers/firmware/cirrus/test/cs_dsp_mock_mem_maps.c +++ b/drivers/firmware/cirrus/test/cs_dsp_mock_mem_maps.c @@ -461,36 +461,6 @@ unsigned int cs_dsp_mock_xm_header_get_alg_base_in_words(struct cs_dsp_test *pri } EXPORT_SYMBOL_NS_GPL(cs_dsp_mock_xm_header_get_alg_base_in_words, "FW_CS_DSP_KUNIT_TEST_UTILS"); -/** - * cs_dsp_mock_xm_header_get_fw_version_from_regmap() - Firmware version. - * - * @priv: Pointer to struct cs_dsp_test. - * - * Return: Firmware version word value. - */ -unsigned int cs_dsp_mock_xm_header_get_fw_version_from_regmap(struct cs_dsp_test *priv) -{ - unsigned int xm = cs_dsp_mock_base_addr_for_mem(priv, WMFW_ADSP2_XM); - union { - struct wmfw_id_hdr adsp2; - struct wmfw_v3_id_hdr halo; - } hdr; - - switch (priv->dsp->type) { - case WMFW_ADSP2: - regmap_raw_read(priv->dsp->regmap, xm, &hdr.adsp2, sizeof(hdr.adsp2)); - return be32_to_cpu(hdr.adsp2.ver); - case WMFW_HALO: - regmap_raw_read(priv->dsp->regmap, xm, &hdr.halo, sizeof(hdr.halo)); - return be32_to_cpu(hdr.halo.ver); - default: - KUNIT_FAIL(priv->test, NULL); - return 0; - } -} -EXPORT_SYMBOL_NS_GPL(cs_dsp_mock_xm_header_get_fw_version_from_regmap, - "FW_CS_DSP_KUNIT_TEST_UTILS"); - /** * cs_dsp_mock_xm_header_get_fw_version() - Firmware version. * diff --git a/drivers/firmware/cirrus/test/cs_dsp_test_bin.c b/drivers/firmware/cirrus/test/cs_dsp_test_bin.c index 1e161bbc5b4a..163b7faecff4 100644 --- a/drivers/firmware/cirrus/test/cs_dsp_test_bin.c +++ b/drivers/firmware/cirrus/test/cs_dsp_test_bin.c @@ -2198,7 +2198,7 @@ static int cs_dsp_bin_test_common_init(struct kunit *test, struct cs_dsp *dsp) priv->local->bin_builder = cs_dsp_mock_bin_init(priv, 1, - cs_dsp_mock_xm_header_get_fw_version_from_regmap(priv)); + cs_dsp_mock_xm_header_get_fw_version(xm_hdr)); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->local->bin_builder); /* We must provide a dummy wmfw to load */ diff --git a/drivers/firmware/cirrus/test/cs_dsp_test_bin_error.c b/drivers/firmware/cirrus/test/cs_dsp_test_bin_error.c index 8748874f0552..a7ec956d2724 100644 --- a/drivers/firmware/cirrus/test/cs_dsp_test_bin_error.c +++ b/drivers/firmware/cirrus/test/cs_dsp_test_bin_error.c @@ -451,7 +451,7 @@ static int cs_dsp_bin_err_test_common_init(struct kunit *test, struct cs_dsp *ds local->bin_builder = cs_dsp_mock_bin_init(priv, 1, - cs_dsp_mock_xm_header_get_fw_version_from_regmap(priv)); + cs_dsp_mock_xm_header_get_fw_version(local->xm_header)); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, local->bin_builder); /* Init cs_dsp */ diff --git a/include/linux/firmware/cirrus/cs_dsp_test_utils.h b/include/linux/firmware/cirrus/cs_dsp_test_utils.h index 4f87a908ab4f..ecd821ed8064 100644 --- a/include/linux/firmware/cirrus/cs_dsp_test_utils.h +++ b/include/linux/firmware/cirrus/cs_dsp_test_utils.h @@ -104,7 +104,6 @@ unsigned int cs_dsp_mock_num_dsp_words_to_num_packed_regs(unsigned int num_dsp_w unsigned int cs_dsp_mock_xm_header_get_alg_base_in_words(struct cs_dsp_test *priv, unsigned int alg_id, int mem_type); -unsigned int cs_dsp_mock_xm_header_get_fw_version_from_regmap(struct cs_dsp_test *priv); unsigned int cs_dsp_mock_xm_header_get_fw_version(struct cs_dsp_mock_xm_header *header); void cs_dsp_mock_xm_header_drop_from_regmap_cache(struct cs_dsp_test *priv); int cs_dsp_mock_xm_header_write_to_regmap(struct cs_dsp_mock_xm_header *header); -- 2.39.5

2 weeks, 4 days

2
1
0 0

[PATCH v3 2/2] rcutorture: Fix issue with re-using old images on ARM64

by Joel Fernandes

On ARM64, when running with --configs '36*SRCU-P', I noticed that only 1 instance instead of 36 for starting. Fix it by checking for Image files, instead of bzImage which ARM does not seem to have. With this I see all 36 instances running at the same time in the batch. Signed-off-by: Joel Fernandes <joelagnelf(a)nvidia.com> --- tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh index ad79784e552d..957800c9ffba 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh @@ -73,7 +73,7 @@ config_override_param "$config_dir/CFcommon.$(uname -m)" KcList \ cp $T/KcList $resdir/ConfigFragment base_resdir=`echo $resdir | sed -e 's/\.[0-9]\+$//'` -if test "$base_resdir" != "$resdir" && test -f $base_resdir/bzImage && test -f $base_resdir/vmlinux +if test "$base_resdir" != "$resdir" && (test -f $base_resdir/bzImage || test -f $base_resdir/Image) && test -f $base_resdir/vmlinux then # Rerunning previous test, so use that test's kernel. QEMU="`identify_qemu $base_resdir/vmlinux`" -- 2.43.0

2 weeks, 4 days

1
0
0 0

[PATCH bpf-next v1 0/4] bpf, sockmap: Fix data loss and panic issues

by Jiayuan Chen

I was writing a benchmark based on sockmap + TCP and discovered several issues: 1. When EAGAIN occurs, the direction of skb is incorrect, causing data loss when retry. 2. When sending partial data, the offset is not recorded, leading to duplicate data being sent when retry. 3. An unexpected BUG_ON() judgment in skb_linearize is triggered. 4. The memory of psock->ingress_skb is not limited by the socket buffer and memcg. Issues 1, 2, and 3 are described in each patch's commit message. Regarding issue 4, this patchset does not cover it as it is difficult to handle in practice, and I am still working on it. Here is a brief description of the issue: When using sockmap to skb/stream redirect, if the receiving end does not perform read operations, all data will be buffered in ingress_skb. For example: ''' // set memory limit to 50G cgcreate -g memory:myGroup cgset -r memory.max="5000M" myGroup // start benchmark and disable consumer from reading cgexec -g "memory:myGroup" ./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --delay-consumer=-1 -d 100 Iter 0 ( 29.179us): Send Speed 2668.548 MB/s (20360.406 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 1 ( -7.237us): Send Speed 2694.467 MB/s (20557.149 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 2 ( -1.918us): Send Speed 2693.404 MB/s (20548.039 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 3 ( -0.684us): Send Speed 2693.138 MB/s (20548.014 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 4 ( 7.879us): Send Speed 2698.620 MB/s (20588.838 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 5 ( -3.224us): Send Speed 2696.553 MB/s (20573.066 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 6 ( -5.409us): Send Speed 2699.705 MB/s (20597.111 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 7 ( -0.439us): Send Speed 2699.691 MB/s (20597.009 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) ... // memory usage are not limited cat /proc/slabinfo | grep skb skbuff_small_head 11824024 11824024 704 46 8 : tunables 0 0 0 : slabdata 257044 257044 0 skbuff_fclone_cache 11822080 11822080 512 32 4 : tunables 0 0 0 : slabdata 369440 369440 0 ''' Thus, a simple socket in a large file upload/download model can eat the entire OS memory. We must charge the skb memory to psock->sk, and if we do not want losing skb, we need to feedback the error info to read_sock/read_skb when the enqueue operation of psock->ingress_skb fails. --- My another patch related to stability also requires maintainers to spare some time from their busy schedules for review. https://lore.kernel.org/bpf/20250317092257.68760-1-jiayuan.chen@linux.dev/T… Jiayuan Chen (4): bpf, sockmap: Fix data lost during EAGAIN retries bpf, sockmap: fix duplicated data transmission bpf, sockmap: Fix panic when calling skb_linearize selftest/bpf/benchs: Add benchmark for sockmap usage net/core/skmsg.c | 48 +- tools/testing/selftests/bpf/Makefile | 2 + tools/testing/selftests/bpf/bench.c | 4 + .../selftests/bpf/benchs/bench_sockmap.c | 599 ++++++++++++++++++ .../selftests/bpf/progs/bench_sockmap_prog.c | 65 ++ 5 files changed, 697 insertions(+), 21 deletions(-) create mode 100644 tools/testing/selftests/bpf/benchs/bench_sockmap.c create mode 100644 tools/testing/selftests/bpf/progs/bench_sockmap_prog.c -- 2.47.1

2 weeks, 5 days

3
6
0 0

[PATCH bpf-next v4 0/3] bpf: Fix use-after-free of sockmap

by Jiayuan Chen

Syzkaller reported this issue [1]. The current sockmap has a dependency on sk_socket in both read and write stages, but there is a possibility that sk->sk_socket is released during the process, leading to panic situations. For a detailed reproduction, please refer to the description in the v2: https://lore.kernel.org/bpf/20250228055106.58071-1-jiayuan.chen@linux.dev/ The corresponding fix approaches are described in the commit messages of each patch. By the way, the current sockmap lacks statistical information, especially global statistics, such as the number of successful or failed rx and tx operations. These statistics cannot be obtained from the socket interface itself. These data will be of great help in troubleshooting issues and observing sockmap behavior. If the maintainer/reviewer does not object, I think we can provide these statistical information in the future, either through proc/trace/bpftool. [1] https://syzkaller.appspot.com/bug?extid=dd90a702f518e0eac072 --- v3 -> v4: 1. Rebase on -rc. 2. Incorporated valuable feedback from the v3 thread into the commit message, making it easier to review. https://lore.kernel.org/all/20250317092257.68760-3-jiayuan.chen@linux.dev/ v2 -> v3: 1. Michal Luczaj reported similar race issue under sockmap sending path. 2. Rcu lock is conflict with mutex_lock in unix socket read implementation. https://lore.kernel.org/bpf/20250228055106.58071-1-jiayuan.chen@linux.dev/ v1 -> v2: 1. Add Fixes tag. 2. Extend selftest of edge case for TCP/UDP sockets. 3. Add Reviewed-by and Acked-by tag. https://lore.kernel.org/bpf/20250226132242.52663-1-jiayuan.chen@linux.dev/T… Jiayuan Chen (3): bpf, sockmap: avoid using sk_socket after free when sending bpf, sockmap: avoid using sk_socket after free when reading selftests/bpf: Add edge case tests for sockmap net/core/skmsg.c | 22 ++++++- .../selftests/bpf/prog_tests/socket_helpers.h | 13 +++- .../selftests/bpf/prog_tests/sockmap_basic.c | 60 +++++++++++++++++++ 3 files changed, 91 insertions(+), 4 deletions(-) -- 2.47.1

2 weeks, 5 days

2
4
0 0

[PATCH bpf-next v2 0/2] bpf: fix ktls panic with sockmap and add tests

by Jiayuan Chen

We can reproduce the issue using the existing test program: './test_sockmap --ktls' Or use the selftest I provided, which will cause a panic: ------------[ cut here ]------------ kernel BUG at lib/iov_iter.c:629! PKRU: 55555554 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? iov_iter_revert+0x178/0x180 ? iov_iter_revert+0x178/0x180 ? do_error_trap+0x7d/0x110 ? iov_iter_revert+0x178/0x180 ? exc_invalid_op+0x50/0x70 ? iov_iter_revert+0x178/0x180 ? asm_exc_invalid_op+0x1a/0x20 ? iov_iter_revert+0x178/0x180 ? iov_iter_revert+0x5c/0x180 tls_sw_sendmsg_locked.isra.0+0x794/0x840 tls_sw_sendmsg+0x52/0x80 ? inet_sendmsg+0x1f/0x70 __sys_sendto+0x1cd/0x200 ? find_held_lock+0x2b/0x80 ? syscall_trace_enter+0x140/0x270 ? __lock_release.isra.0+0x5e/0x170 ? find_held_lock+0x2b/0x80 ? syscall_trace_enter+0x140/0x270 ? lockdep_hardirqs_on_prepare+0xda/0x190 ? ktime_get_coarse_real_ts64+0xc2/0xd0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x90/0x170 1. It looks like the issue started occurring after bpf being introduced to ktls and later the addition of assertions to iov_iter has caused a panic. If my fix tag is incorrect, please assist me in correcting the fix tag. 2. I make minimal changes for now, it's enough to make ktls work correctly. --- v1->v2: Added more content to the commit message https://lore.kernel.org/all/20250123171552.57345-1-mrpre@163.com/#r --- Jiayuan Chen (2): bpf: fix ktls panic with sockmap selftests/bpf: add ktls selftest net/tls/tls_sw.c | 8 +- .../selftests/bpf/prog_tests/sockmap_ktls.c | 174 +++++++++++++++++- .../selftests/bpf/progs/test_sockmap_ktls.c | 26 +++ 3 files changed, 205 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/bpf/progs/test_sockmap_ktls.c -- 2.47.1

2 weeks, 5 days

3
4
0 0

[PATCH] selftests/bpf: Fix bpf_nf selftest failure

by Saket Kumar Bhaskar

For systems with missing iptables-legacy tool, this selftest fails. Add check to find if iptables-legacy tool is available and skip the test if the tool is missing. Fixes: de9c8d848d90 ("selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test") Signed-off-by: Saket Kumar Bhaskar <skb99(a)linux.ibm.com> --- tools/testing/selftests/bpf/prog_tests/bpf_nf.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_nf.c b/tools/testing/selftests/bpf/prog_tests/bpf_nf.c index dbd13f8e42a7..dd6512fa652b 100644 --- a/tools/testing/selftests/bpf/prog_tests/bpf_nf.c +++ b/tools/testing/selftests/bpf/prog_tests/bpf_nf.c @@ -63,6 +63,12 @@ static void test_bpf_nf_ct(int mode) .repeat = 1, ); + if (SYS_NOFAIL("iptables-legacy --version")) { + fprintf(stdout, "Missing required iptables-legacy tool\n"); + test__skip(); + return; + } + skel = test_bpf_nf__open_and_load(); if (!ASSERT_OK_PTR(skel, "test_bpf_nf__open_and_load")) return; -- 2.43.5

2 weeks, 5 days

2
1
0 0

[PATCH] selftests/bpf: close the file descriptor to avoid resource leaks

by Malaya Kumar Rout

Static Analyis for bench_htab_mem.c with cppcheck:error tools/testing/selftests/bpf/benchs/bench_htab_mem.c:284:3: error: Resource leak: fd [resourceLeak] tools/testing/selftests/bpf/prog_tests/sk_assign.c:41:3: error: Resource leak: tc [resourceLeak] fix the issue by closing the file descriptor (fd & tc) when read & fgets operation fails. Signed-off-by: Malaya Kumar Rout <malayarout91(a)gmail.com> --- tools/testing/selftests/bpf/benchs/bench_htab_mem.c | 1 + tools/testing/selftests/bpf/prog_tests/sk_assign.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/benchs/bench_htab_mem.c b/tools/testing/selftests/bpf/benchs/bench_htab_mem.c index 926ee822143e..59746fd2c23a 100644 --- a/tools/testing/selftests/bpf/benchs/bench_htab_mem.c +++ b/tools/testing/selftests/bpf/benchs/bench_htab_mem.c @@ -281,6 +281,7 @@ static void htab_mem_read_mem_cgrp_file(const char *name, unsigned long *value) got = read(fd, buf, sizeof(buf) - 1); if (got <= 0) { *value = 0; + close(fd); return; } buf[got] = 0; diff --git a/tools/testing/selftests/bpf/prog_tests/sk_assign.c b/tools/testing/selftests/bpf/prog_tests/sk_assign.c index 0b9bd1d6f7cc..10a0ab954b8a 100644 --- a/tools/testing/selftests/bpf/prog_tests/sk_assign.c +++ b/tools/testing/selftests/bpf/prog_tests/sk_assign.c @@ -37,8 +37,10 @@ configure_stack(void) tc = popen("tc -V", "r"); if (CHECK_FAIL(!tc)) return false; - if (CHECK_FAIL(!fgets(tc_version, sizeof(tc_version), tc))) + if (CHECK_FAIL(!fgets(tc_version, sizeof(tc_version), tc))) { + pclose(tc); return false; + } if (strstr(tc_version, ", libbpf ")) prog = "test_sk_assign_libbpf.bpf.o"; else -- 2.43.0

2 weeks, 5 days

5
10
0 0

[GIT PULL] Kselftest fixes update for Linux 6.15-rc2

by Shuah Khan

Hi Linus, Please pull the following kselftest fixes update for Linux 6.15-rc2 Fixes tpm2, futex, and mincore tests. Creates a dedicated .gitignore for tpm2 Details: selftests: tpm2: test_smoke: use POSIX-conformant expression operator selftests/futex: futex_waitv wouldblock test should fail selftests: tpm2: create a dedicated .gitignore selftests/mincore: Allow read-ahead pages to reach the end of the file diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 0af2f6be1b4281385b618cb86ad946eded089ac8: Linux 6.15-rc1 (2025-04-06 13:11:33 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux_kselftest-fixes-6.15-rc2 for you to fetch changes up to 197c1eaa7ba633a482ed7588eea6fd4aa57e08d4: selftests/mincore: Allow read-ahead pages to reach the end of the file (2025-04-08 17:08:50 -0600) ---------------------------------------------------------------- linux_kselftest-fixes-6.15-rc2 Fixes tpm2, futex, and mincore tests. Creates a dedicated .gitignore for tpm2 Details: selftests: tpm2: test_smoke: use POSIX-conformant expression operator selftests/futex: futex_waitv wouldblock test should fail selftests: tpm2: create a dedicated .gitignore selftests/mincore: Allow read-ahead pages to reach the end of the file ---------------------------------------------------------------- Ahmed Salem (1): selftests: tpm2: test_smoke: use POSIX-conformant expression operator Edward Liaw (1): selftests/futex: futex_waitv wouldblock test should fail Khaled Elnaggar (1): selftests: tpm2: create a dedicated .gitignore Qiuxu Zhuo (1): selftests/mincore: Allow read-ahead pages to reach the end of the file tools/testing/selftests/.gitignore | 1 - tools/testing/selftests/futex/functional/futex_wait_wouldblock.c | 2 +- tools/testing/selftests/mincore/mincore_selftest.c | 3 --- tools/testing/selftests/tpm2/.gitignore | 3 +++ tools/testing/selftests/tpm2/test_smoke.sh | 2 +- 5 files changed, 5 insertions(+), 6 deletions(-) create mode 100644 tools/testing/selftests/tpm2/.gitignore ----------------------------------------------------------------

2 weeks, 5 days

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror April 2025