May 2025 - Linux-kselftest-mirror

[PATCH net-next v13 0/9] Device memory TCP TX

by Mina Almasry

v13: https://lore.kernel.org/netdev/20250425204743.617260-1-almasrymina@google.c… === Changelog: - Fix unneeded error label pointed out by Christoph, and addressed nitpick. v12: https://lore.kernel.org/netdev/20250423031117.907681-1-almasrymina@google.c… ==== No changes in v12, just restored the selftests patch I accidentally dropped in v11 v11: https://lore.kernel.org/netdev/20250423031117.907681-1-almasrymina@google.c… ==== Addressed a couple of nits and collected Acked-by from Harshitha (thanks!) v10: https://lore.kernel.org/netdev/20250417231540.2780723-1-almasrymina@google.… ==== Addressed comments following conversations with Pavel, Stan, and Harshitha. Thank you guys for the reviews again. Overall minor changes: Changelog: - Check for !niov->pp in io_zcrx_recv_frag, just in case we end up with a TX niov in that path (Pavel). - Fix locking case in !netif_device_present (Jakub/Stan). v9: https://lore.kernel.org/netdev/20250415224756.152002-1-almasrymina@google.c… === Changelog: - Use priv->bindings list instead of sock_bindings_list. This was missed during the rebase as the bindings have been updated to use priv->bindings recently (thanks Stan!) v8: https://lore.kernel.org/netdev/20250308214045.1160445-1-almasrymina@google.… === Only address minor comments on V7 Changelog: - Use netdev locking instead of rtnl_locking to match rx path. - Now that iouring zcrx is in net-next, use NET_IOV_IOURING instead of NET_IOV_UNSPECIFIED. - Post send binding to net_devmem_dmabuf_bindings after it's been fully initialized (Stan). v7: https://lore.kernel.org/netdev/20250227041209.2031104-1-almasrymina@google.… === Changelog: - Check the dmabuf net_iov binding belongs to the device the TX is going out on. (Jakub) - Provide detailed inspection of callsites of __skb_frag_ref/skb_page_unref in patch 2's changelog (Jakub) v6: https://lore.kernel.org/netdev/20250222191517.743530-1-almasrymina@google.c… === v6 has no major changes. Addressed a few issues from Paolo and David, and collected Acks from Stan. Thank you everyone for the review! Changes: - retain behavior to process MSG_FASTOPEN even if the provided cmsg is invalid (Paolo). - Rework the freeing of tx_vec slightly (it now has its own err label). (Paolo). - Squash the commit that makes dmabuf unbinding scheduled work into the same one which implements the TX path so we don't run into future errors on bisecting (Paolo). - Fix/add comments to explain how dmabuf binding refcounting works (David). v5: https://lore.kernel.org/netdev/20250220020914.895431-1-almasrymina@google.c… === v5 has no major changes; it clears up the relatively minor issues pointed out to in v4, and rebases the series on top of net-next to resolve the conflict with a patch that raced to the tree. It also collects the review tags from v4. Changes: - Rebase to net-next - Fix issues in selftest (Stan). - Address comments in the devmem and netmem driver docs (Stan and Bagas) - Fix zerocopy_fill_skb_from_devmem return error code (Stan). v4: https://lore.kernel.org/netdev/20250203223916.1064540-1-almasrymina@google.… === v4 mainly addresses the critical driver support issue surfaced in v3 by Paolo and Stan. Drivers aiming to support netmem_tx should make sure not to pass the netmem dma-addrs to the dma-mapping APIs, as these dma-addrs may come from dma-bufs. Additionally other feedback from v3 is addressed. Major changes: - Add helpers to handle netmem dma-addrs. Add GVE support for netmem_tx. - Fix binding->tx_vec not being freed on error paths during the tx binding. - Add a minimal devmem_tx test to devmem.py. - Clean up everything obsolete from the cover letter (Paolo). v3: https://patchwork.kernel.org/project/netdevbpf/list/?series=929401&state=* === Address minor comments from RFCv2 and fix a few build warnings and ynl-regen issues. No major changes. RFC v2: https://patchwork.kernel.org/project/netdevbpf/list/?series=920056&state=* ======= RFC v2 addresses much of the feedback from RFC v1. I plan on sending something close to this as net-next reopens, sending it slightly early to get feedback if any. Major changes: -------------- - much improved UAPI as suggested by Stan. We now interpret the iov_base of the passed in iov from userspace as the offset into the dmabuf to send from. This removes the need to set iov.iov_base = NULL which may be confusing to users, and enables us to send multiple iovs in the same sendmsg() call. ncdevmem and the docs show a sample use of that. - Removed the duplicate dmabuf iov_iter in binding->iov_iter. I think this is good improvment as it was confusing to keep track of 2 iterators for the same sendmsg, and mistracking both iterators caused a couple of bugs reported in the last iteration that are now resolved with this streamlining. - Improved test coverage in ncdevmem. Now multiple sendmsg() are tested, and sending multiple iovs in the same sendmsg() is tested. - Fixed issue where dmabuf unmapping was happening in invalid context (Stan). ==================================================================== The TX path had been dropped from the Device Memory TCP patch series post RFCv1 [1], to make that series slightly easier to review. This series rebases the implementation of the TX path on top of the net_iov/netmem framework agreed upon and merged. The motivation for the feature is thoroughly described in the docs & cover letter of the original proposal, so I don't repeat the lengthy descriptions here, but they are available in [1]. Full outline on usage of the TX path is detailed in the documentation included with this series. Test example is available via the kselftest included in the series as well. The series is relatively small, as the TX path for this feature largely piggybacks on the existing MSG_ZEROCOPY implementation. Patch Overview: --------------- 1. Documentation & tests to give high level overview of the feature being added. 1. Add netmem refcounting needed for the TX path. 2. Devmem TX netlink API. 3. Devmem TX net stack implementation. 4. Make dma-buf unbinding scheduled work to handle TX cases where it gets freed from contexts where we can't sleep. 5. Add devmem TX documentation. 6. Add scaffolding enabling driver support for netmem_tx. Add helpers, driver feature flag, and docs to enable drivers to declare netmem_tx support. 7. Guard netmem_tx against being enabled against drivers that don't support it. 8. Add devmem_tx selftests. Add TX path to ncdevmem and add a test to devmem.py. Testing: -------- Testing is very similar to devmem TCP RX path. The ncdevmem test used for the RX path is now augemented with client functionality to test TX path. * Test Setup: Kernel: net-next with this RFC and memory provider API cherry-picked locally. Hardware: Google Cloud A3 VMs. NIC: GVE with header split & RSS & flow steering support. Performance results are not included with this version, unfortunately. I'm having issues running the dma-buf exporter driver against the upstream kernel on my test setup. The issues are specific to that dma-buf exporter and do not affect this patch series. I plan to follow up this series with perf fixes if the tests point to issues once they're up and running. Special thanks to Stan who took a stab at rebasing the TX implementation on top of the netmem/net_iov framework merged. Parts of his proposal [2] that are reused as-is are forked off into their own patches to give full credit. [1] https://lore.kernel.org/netdev/20240909054318.1809580-1-almasrymina@google.… [2] https://lore.kernel.org/netdev/20240913150913.1280238-2-sdf@fomichev.me/T/#… Cc: sdf(a)fomichev.me Cc: asml.silence(a)gmail.com Cc: dw(a)davidwei.uk Cc: Jamal Hadi Salim <jhs(a)mojatatu.com> Cc: Victor Nogueira <victor(a)mojatatu.com> Cc: Pedro Tammela <pctammela(a)mojatatu.com> Cc: Samiullah Khawaja <skhawaja(a)google.com> Cc: Kuniyuki Iwashima <kuniyu(a)amazon.com> Mina Almasry (8): netmem: add niov->type attribute to distinguish different net_iov types net: add get_netmem/put_netmem support net: devmem: Implement TX path net: add devmem TCP TX documentation net: enable driver support for netmem TX gve: add netmem TX support to GVE DQO-RDA mode net: check for driver support in netmem TX selftests: ncdevmem: Implement devmem TCP TX Stanislav Fomichev (1): net: devmem: TCP tx netlink api Documentation/netlink/specs/netdev.yaml | 12 + Documentation/networking/devmem.rst | 150 ++++++++- .../networking/net_cachelines/net_device.rst | 1 + Documentation/networking/netdev-features.rst | 5 + Documentation/networking/netmem.rst | 23 +- drivers/net/ethernet/google/gve/gve_main.c | 3 + drivers/net/ethernet/google/gve/gve_tx_dqo.c | 8 +- include/linux/netdevice.h | 2 + include/linux/skbuff.h | 17 +- include/linux/skbuff_ref.h | 4 +- include/net/netmem.h | 34 +- include/net/sock.h | 1 + include/uapi/linux/netdev.h | 1 + io_uring/zcrx.c | 3 +- net/core/datagram.c | 48 ++- net/core/dev.c | 34 +- net/core/devmem.c | 131 ++++++-- net/core/devmem.h | 83 ++++- net/core/netdev-genl-gen.c | 13 + net/core/netdev-genl-gen.h | 1 + net/core/netdev-genl.c | 80 ++++- net/core/skbuff.c | 48 ++- net/core/sock.c | 6 + net/ipv4/ip_output.c | 3 +- net/ipv4/tcp.c | 50 ++- net/ipv6/ip6_output.c | 3 +- net/vmw_vsock/virtio_transport_common.c | 5 +- tools/include/uapi/linux/netdev.h | 1 + .../selftests/drivers/net/hw/devmem.py | 26 +- .../selftests/drivers/net/hw/ncdevmem.c | 300 +++++++++++++++++- 30 files changed, 1008 insertions(+), 88 deletions(-) base-commit: 0d15a26b247d25cd012134bf8825128fedb15cc9 -- 2.49.0.901.g37484f566f-goog

4 months

3
17
0 0

[PATCH net 0/3 v4] selftests: drv: net: fix `ping.py` test failure

by Mohsin Bashir

Fix `ping.py` test failure on an ipv6 system, and appropriately handle the cases where either one of the two address families (ipv4, ipv6) is not present. Mohsin Bashir (3): selftests: drv: net: fix test failure on ipv6 sys selftests: drv: net: avoid skipping tests selftests: drv: net: add version indicator tools/testing/selftests/drivers/net/ping.py | 45 ++++++++++++--------- 1 file changed, 27 insertions(+), 18 deletions(-) -- 2.47.1

4 months

4
13
0 0

[PATCH net-next v2] selftests: iou-zcrx: Clean up build warnings for error format

by Haiyue Wang

Clean up two build warnings: [1] iou-zcrx.c: In function ‘process_recvzc’: iou-zcrx.c:263:37: warning: too many arguments for format [-Wformat-extra-args] 263 | error(1, 0, "payload mismatch at ", i); | ^~~~~~~~~~~~~~~~~~~~~~ [2] Use "%zd" for ssize_t type as better iou-zcrx.c: In function ‘run_client’: iou-zcrx.c:357:47: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=] 357 | error(1, 0, "send(): %d", sent); | ~^ ~~~~ | | | | int ssize_t {aka long int} | %ld Signed-off-by: Haiyue Wang <haiyuewa(a)163.com> --- v2: - Dont't wrap the build warning message to make scripts/checkpatch.pl happy, keep it as for readability. - Change the format for ssize_t from "%ld" to "%zd" as Simon suggested. - Change the target to net-next tree. v1: https://lore.kernel.org/netdev/20250502042240.17371-1-haiyuewa@163.com/ --- tools/testing/selftests/drivers/net/hw/iou-zcrx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/drivers/net/hw/iou-zcrx.c b/tools/testing/selftests/drivers/net/hw/iou-zcrx.c index 8aa426014c87..62456df947bc 100644 --- a/tools/testing/selftests/drivers/net/hw/iou-zcrx.c +++ b/tools/testing/selftests/drivers/net/hw/iou-zcrx.c @@ -260,7 +260,7 @@ static void process_recvzc(struct io_uring *ring, struct io_uring_cqe *cqe) for (i = 0; i < n; i++) { if (*(data + i) != payload[(received + i)]) - error(1, 0, "payload mismatch at ", i); + error(1, 0, "payload mismatch at %d", i); } received += n; @@ -354,7 +354,7 @@ static void run_client(void) chunk = min_t(ssize_t, cfg_payload_len, to_send); res = send(fd, src, chunk, 0); if (res < 0) - error(1, 0, "send(): %d", sent); + error(1, 0, "send(): %zd", sent); sent += res; to_send -= res; } -- 2.49.0

4 months

3
3
0 0

[PATCH v2 0/6] Replace CONFIG_DMABUF_SYSFS_STATS with BPF

by T.J. Mercier

Until CONFIG_DMABUF_SYSFS_STATS was added [1] it was only possible to perform per-buffer accounting with debugfs which is not suitable for production environments. Eventually we discovered the overhead with per-buffer sysfs file creation/removal was significantly impacting allocation and free times, and exacerbated kernfs lock contention. [2] dma_buf_stats_setup() is responsible for 39% of single-page buffer creation duration, or 74% of single-page dma_buf_export() duration when stressing dmabuf allocations and frees. I prototyped a change from per-buffer to per-exporter statistics with a RCU protected list of exporter allocations that accommodates most (but not all) of our use-cases and avoids almost all of the sysfs overhead. While that adds less overhead than per-buffer sysfs, and less even than the maintenance of the dmabuf debugfs_list, it's still *additional* overhead on top of the debugfs_list and doesn't give us per-buffer info. This series uses the existing dmabuf debugfs_list to implement a BPF dmabuf iterator, which adds no overhead to buffer allocation/free and provides per-buffer info. The list has been moved outside of CONFIG_DEBUG_FS scope so that it is always populated. The BPF program loaded by userspace that extracts per-buffer information gets to define its own interface which avoids the lack of ABI stability with debugfs. As this is a replacement for our use of CONFIG_DMABUF_SYSFS_STATS, the last patch is a RFC for removing it from the kernel. Please see my suggestion there regarding the timeline for that. [1] https://lore.kernel.org/linux-media/20201210044400.1080308-1-hridya@google.… [2] https://lore.kernel.org/all/20220516171315.2400578-1-tjmercier@google.com v1: https://lore.kernel.org/all/20250414225227.3642618-1-tjmercier@google.com v1 -> v2: Make the DMA buffer list independent of CONFIG_DEBUG_FS per Christian König Add CONFIG_DMA_SHARED_BUFFER check to kernel/bpf/Makefile per kernel test robot Use BTF_ID_LIST_SINGLE instead of BTF_ID_LIST_GLOBAL_SINGLE per Song Liu Fixup comment style, mixing code/declarations, and use ASSERT_OK_FD in selftest per Song Liu Add BPF_ITER_RESCHED feature to bpf_dmabuf_reg_info per Alexei Starovoitov Add open-coded iterator and selftest per Alexei Starovoitov Add a second test buffer from the system dmabuf heap to selftests Use the BPF program we'll use in production for selftest per Alexei Starovoitov https://r.android.com/c/platform/system/bpfprogs/+/3616123/2/dmabufIter.c https://r.android.com/c/platform/system/memory/libmeminfo/+/3614259/1/libdm… T.J. Mercier (6): dma-buf: Rename and expose debugfs symbols bpf: Add dmabuf iterator bpf: Add open coded dmabuf iterator selftests/bpf: Add test for dmabuf_iter selftests/bpf: Add test for open coded dmabuf_iter RFC: dma-buf: Remove DMA-BUF statistics .../ABI/testing/sysfs-kernel-dmabuf-buffers | 24 -- Documentation/driver-api/dma-buf.rst | 5 - drivers/dma-buf/Kconfig | 15 - drivers/dma-buf/Makefile | 1 - drivers/dma-buf/dma-buf-sysfs-stats.c | 202 -------------- drivers/dma-buf/dma-buf-sysfs-stats.h | 35 --- drivers/dma-buf/dma-buf.c | 58 +--- include/linux/dma-buf.h | 6 +- kernel/bpf/Makefile | 3 + kernel/bpf/dmabuf_iter.c | 177 ++++++++++++ kernel/bpf/helpers.c | 5 + .../testing/selftests/bpf/bpf_experimental.h | 5 + tools/testing/selftests/bpf/config | 3 + .../selftests/bpf/prog_tests/dmabuf_iter.c | 258 ++++++++++++++++++ .../testing/selftests/bpf/progs/dmabuf_iter.c | 91 ++++++ 15 files changed, 561 insertions(+), 327 deletions(-) delete mode 100644 Documentation/ABI/testing/sysfs-kernel-dmabuf-buffers delete mode 100644 drivers/dma-buf/dma-buf-sysfs-stats.c delete mode 100644 drivers/dma-buf/dma-buf-sysfs-stats.h create mode 100644 kernel/bpf/dmabuf_iter.c create mode 100644 tools/testing/selftests/bpf/prog_tests/dmabuf_iter.c create mode 100644 tools/testing/selftests/bpf/progs/dmabuf_iter.c base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8 -- 2.49.0.906.g1f30a19c02-goog

4 months

3
13
0 0

[PATCH net-next 0/7] selftests: mptcp: increase code coverage

by Matthieu Baerts (NGI0)

Here are various patches slightly improving MPTCP code coverage: - Patch 1: avoid a harmless 'grep: write error' warning. - Patch 2: use getaddrinfo() with IPPROTO_MPTCP in more places. - Patch 3-6: prepare and add support to get info for a specific subflow when giving the 5-tuple. - Patch 7: validate the previous patch and cover "subflow_get_info_size" in the kernel code (mptcp_diag.c). Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Gang Yan (5): selftests: mptcp: add struct params in mptcp_diag selftests: mptcp: refactor send_query parameters for code clarity selftests: mptcp: refactor NLMSG handling with 'proto' selftests: mptcp: add helpers to get subflow_info selftests: mptcp: add chk_sublfow in diag.sh Geliang Tang (1): selftests: mptcp: sockopt: use IPPROTO_MPTCP for getaddrinfo Matthieu Baerts (NGI0) (1): selftests: mptcp: info: hide 'grep: write error' warnings tools/testing/selftests/net/mptcp/diag.sh | 32 +++ tools/testing/selftests/net/mptcp/mptcp_diag.c | 228 +++++++++++++++++++--- tools/testing/selftests/net/mptcp/mptcp_inq.c | 16 +- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 7 +- tools/testing/selftests/net/mptcp/mptcp_sockopt.c | 16 +- 5 files changed, 257 insertions(+), 42 deletions(-) --- base-commit: 630cb33ccfcd04563598d0f0edd96c94ddf3352d change-id: 20250502-net-next-mptcp-sft-inc-cover-f5eda7035432 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

4 months

2
8
0 0

[PATCH AUTOSEL 5.15 083/153] selftests/net: have `gro.sh -t` return a correct exit code

by Sasha Levin

From: Kevin Krakauer <krakauer(a)google.com> [ Upstream commit 784e6abd99f24024a8998b5916795f0bec9d2fd9 ] Modify gro.sh to return a useful exit code when the -t flag is used. It formerly returned 0 no matter what. Tested: Ran `gro.sh -t large` and verified that test failures return 1. Signed-off-by: Kevin Krakauer <krakauer(a)google.com> Reviewed-by: Willem de Bruijn <willemb(a)google.com> Link: https://patch.msgid.link/20250226192725.621969-2-krakauer@google.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/net/gro.sh | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/gro.sh b/tools/testing/selftests/net/gro.sh index 342ad27f631b1..e771f5f7faa26 100755 --- a/tools/testing/selftests/net/gro.sh +++ b/tools/testing/selftests/net/gro.sh @@ -95,5 +95,6 @@ trap cleanup EXIT if [[ "${test}" == "all" ]]; then run_all_tests else - run_test "${proto}" "${test}" + exit_code=$(run_test "${proto}" "${test}") + exit $exit_code fi; -- 2.39.5

4 months

1
0
0 0

[PATCH AUTOSEL 6.1 162/212] kunit: tool: Use qboot on QEMU x86_64

by Sasha Levin

From: Brendan Jackman <jackmanb(a)google.com> [ Upstream commit 08fafac4c9f289a9d9a22d838921e4b3eb22c664 ] As noted in [0], SeaBIOS (QEMU default) makes a mess of the terminal, qboot does not. It turns out this is actually useful with kunit.py, since the user is exposed to this issue if they set --raw_output=all. qboot is also faster than SeaBIOS, but it's is marginal for this usecase. [0] https://lore.kernel.org/all/CA+i-1C0wYb-gZ8Mwh3WSVpbk-LF-Uo+njVbASJPe1WXDUR… Both SeaBIOS and qboot are x86-specific. Link: https://lore.kernel.org/r/20250124-kunit-qboot-v1-1-815e4d4c6f7c@google.com Signed-off-by: Brendan Jackman <jackmanb(a)google.com> Reviewed-by: David Gow <davidgow(a)google.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/kunit/qemu_configs/x86_64.py | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/kunit/qemu_configs/x86_64.py b/tools/testing/kunit/qemu_configs/x86_64.py index dc79490768630..4a6bf4e048f5b 100644 --- a/tools/testing/kunit/qemu_configs/x86_64.py +++ b/tools/testing/kunit/qemu_configs/x86_64.py @@ -7,4 +7,6 @@ CONFIG_SERIAL_8250_CONSOLE=y''', qemu_arch='x86_64', kernel_path='arch/x86/boot/bzImage', kernel_command_line='console=ttyS0', - extra_qemu_params=[]) + # qboot is faster than SeaBIOS and doesn't mess up + # the terminal. + extra_qemu_params=['-bios', 'qboot.rom']) -- 2.39.5

4 months

1
0
0 0

[PATCH AUTOSEL 6.1 115/212] selftests/net: have `gro.sh -t` return a correct exit code

by Sasha Levin

From: Kevin Krakauer <krakauer(a)google.com> [ Upstream commit 784e6abd99f24024a8998b5916795f0bec9d2fd9 ] Modify gro.sh to return a useful exit code when the -t flag is used. It formerly returned 0 no matter what. Tested: Ran `gro.sh -t large` and verified that test failures return 1. Signed-off-by: Kevin Krakauer <krakauer(a)google.com> Reviewed-by: Willem de Bruijn <willemb(a)google.com> Link: https://patch.msgid.link/20250226192725.621969-2-krakauer@google.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/net/gro.sh | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/gro.sh b/tools/testing/selftests/net/gro.sh index 342ad27f631b1..e771f5f7faa26 100755 --- a/tools/testing/selftests/net/gro.sh +++ b/tools/testing/selftests/net/gro.sh @@ -95,5 +95,6 @@ trap cleanup EXIT if [[ "${test}" == "all" ]]; then run_all_tests else - run_test "${proto}" "${test}" + exit_code=$(run_test "${proto}" "${test}") + exit $exit_code fi; -- 2.39.5

4 months

1
0
0 0

[PATCH AUTOSEL 6.6 259/294] bridge: mdb: Allow replace of a host-joined group

by Sasha Levin

From: Petr Machata <petrm(a)nvidia.com> [ Upstream commit d9e9f6d7b7d0c520bb87f19d2cbc57aeeb2091d5 ] Attempts to replace an MDB group membership of the host itself are currently bounced: # ip link add name br up type bridge vlan_filtering 1 # bridge mdb replace dev br port br grp 239.0.0.1 vid 2 # bridge mdb replace dev br port br grp 239.0.0.1 vid 2 Error: bridge: Group is already joined by host. A similar operation done on a member port would succeed. Ignore the check for replacement of host group memberships as well. The bit of code that this enables is br_multicast_host_join(), which, for already-joined groups only refreshes the MC group expiration timer, which is desirable; and a userspace notification, also desirable. Change a selftest that exercises this code path from expecting a rejection to expecting a pass. The rest of MDB selftests pass without modification. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> Acked-by: Nikolay Aleksandrov <razor(a)blackwall.org> Link: https://patch.msgid.link/e5c5188b9787ae806609e7ca3aa2a0a501b9b5c4.173868564… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- net/bridge/br_mdb.c | 2 +- tools/testing/selftests/net/forwarding/bridge_mdb.sh | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/bridge/br_mdb.c b/net/bridge/br_mdb.c index 7305f5f8215ca..96bea0c8408fe 100644 --- a/net/bridge/br_mdb.c +++ b/net/bridge/br_mdb.c @@ -1030,7 +1030,7 @@ static int br_mdb_add_group(const struct br_mdb_config *cfg, /* host join */ if (!port) { - if (mp->host_joined) { + if (mp->host_joined && !(cfg->nlflags & NLM_F_REPLACE)) { NL_SET_ERR_MSG_MOD(extack, "Group is already joined by host"); return -EEXIST; } diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb.sh b/tools/testing/selftests/net/forwarding/bridge_mdb.sh index a3678dfe5848a..c151374ddf040 100755 --- a/tools/testing/selftests/net/forwarding/bridge_mdb.sh +++ b/tools/testing/selftests/net/forwarding/bridge_mdb.sh @@ -149,7 +149,7 @@ cfg_test_host_common() check_err $? "Failed to add $name host entry" bridge mdb replace dev br0 port br0 grp $grp $state vid 10 &> /dev/null - check_fail $? "Managed to replace $name host entry" + check_err $? "Failed to replace $name host entry" bridge mdb del dev br0 port br0 grp $grp $state vid 10 bridge mdb get dev br0 grp $grp vid 10 &> /dev/null -- 2.39.5

4 months

1
0
0 0

[PATCH v2 0/3] selftests: ublk: more misc fixes

by Uday Shankar

Fix some more minor issues in ublk selftests. The first patch is from https://lore.kernel.org/linux-block/20250423-ublk_selftests-v1-0-7d060e260e… with a modification requested by Jens. The others are new. Signed-off-by: Uday Shankar <ushankar(a)purestorage.com> --- Changes in v2: - Use a test-specific WERROR flag instead of reusing CONFIG_WERROR from the kernel build for deciding whether or not to use -Werror for the kublk build. The default behavior is to use -Werror (Ming Lei) - Link to v1: https://lore.kernel.org/r/20250428-ublk_selftests-v1-0-5795f7b00cda@puresto… --- Uday Shankar (3): selftests: ublk: kublk: build with -Werror iff WERROR!=0 selftests: ublk: make test_generic_06 silent on success selftests: ublk: kublk: fix include path tools/testing/selftests/ublk/Makefile | 6 +++++- tools/testing/selftests/ublk/kublk.h | 1 - tools/testing/selftests/ublk/test_generic_06.sh | 2 +- 3 files changed, 6 insertions(+), 3 deletions(-) --- base-commit: 53ec1abce79c986dc59e59d0c60d00088bcdf32a change-id: 20250428-ublk_selftests-983240d3a325 Best regards, -- Uday Shankar <ushankar(a)purestorage.com>

4 months

3
5
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror May 2025