May 2025 - Linux-kselftest-mirror

[PATCH v7 net-next 00/15] AccECN protocol patch series

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find the v7: v7 (14-May-2025) - Modify group sizes of tcp_sock_write_txrx and tcp_sock_write_rx in #3 based on pahole results (Paolo Abeni <pabeni(a)redhat.com>) - Fix the issue in #4 and #5 where the RFC3168 ECN behavior in tcp_ecn_send() is changed (Paolo Abeni <pabeni(a)redhat.com>) - Modify group size of tcp_sock_write_txrx in #4 and #6 based on pahole results (Paolo Abeni <pabeni(a)redhat.com>) - Update commit message for #9 to explain the increase in tcp_sock_write_rx group size - Modify group size of tcp_sock_write_tx in #10 based on pahole results v6 (09-May-2025) - Add #3 to utilize exisintg holes of tcp_sock_write_txrx group for later patches (#4, #9, #10) with new u8 members (Paolo Abeni <pabeni(a)redhat.com>) - Add pahole outcomes before and after commit in #4, #5, #6, #9, #10, #15 (Paolo Abeni <pabeni(a)redhat.com>) - Define new helper function tcp_send_ack_reflect_ect() for sending ACK with reflected ECT in #5 (Paolo Abeni <pabeni(a)redhat.com>) - Add comments for function tcp_ecn_rcv_synack() in #5 (Paolo Abeni <pabeni(a)redhat.com>) - Add enum/define to be used by sysctl_tcp_ecn in #5, sysctl_tcp_ecn_option in #9, and sysctl_tcp_ecn_option_beacon in #10 (Paolo Abeni <pabeni(a)redhat.com>) - Move accecn_fail_mode and saw_accecn_opt in #5 and #11 to use exisintg holes of tcp_sock (Paolo Abeni <pabeni(a)redhat.com>) - Change data type of new members of tcp_request_sock and move them to the end of struct in #5 and #11 (Paolo Abeni <pabeni(a)redhat.com>) - Move new members of tcp_info to the end of struct in #6 (Paolo Abeni <pabeni(a)redhat.com>) - Merge previous #7 into #9 (Paolo Abeni <pabeni(a)redhat.com>) - Mask ecnfield with INET_ECN_MASK to remove WARN_ONCE in #9 (Paolo Abeni <pabeni(a)redhat.com>) - Reduce the indentation levels for reabability in #9 and #10 (Paolo Abeni <pabeni(a)redhat.com>) - Move delivered_ecn_bytes to the RX group in #9, accecn_opt_tstamp to the TX group in #10, pkts_acked_ewma to the RX group in #15 (Paolo Abeni <pabeni(a)redhat.com>) - Add changes in Documentation/networking/net_cachelines/tcp_sock.rst for new tcp_sock members in #3, #5, #6, #9, #10, #15 v5 (22-Apr-2025) - Further fix for 32-bit ARM alignment in tcp.c (Simon Horman <horms(a)kernel.org>) v4 (18-Apr-2025) - Fix 32-bit ARM assertion for alignment requirement (Simon Horman <horms(a)kernel.org>) v3 (14-Apr-2025) - Fix patch apply issue in v2 (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Mar-2025) - Add one missing patch from the previous AccECN protocol preparation patch series to this patch series. The full patch series can be found in https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28 Best regards, Chia-Yu Chia-Yu Chang (2): tcp: reorganize tcp_sock_write_txrx group for variables later tcp: accecn: AccECN option failure handling Ilpo Järvinen (13): tcp: reorganize SYN ECN code tcp: fast path functions later tcp: AccECN core tcp: accecn: AccECN negotiation tcp: accecn: add AccECN rx byte counters tcp: accecn: AccECN needs to know delivered bytes tcp: sack option handling improvements tcp: accecn: AccECN option tcp: accecn: AccECN option send control tcp: accecn: AccECN option ceb/cep heuristic tcp: accecn: AccECN ACE field multi-wrap heuristic tcp: accecn: try to fit AccECN option with SACK tcp: try to avoid safer when ACKs are thinned .../networking/net_cachelines/tcp_sock.rst | 14 + include/linux/tcp.h | 34 +- include/net/netns/ipv4.h | 2 + include/net/tcp.h | 221 ++++++- include/uapi/linux/tcp.h | 7 + net/ipv4/syncookies.c | 3 + net/ipv4/sysctl_net_ipv4.c | 19 + net/ipv4/tcp.c | 30 +- net/ipv4/tcp_input.c | 608 +++++++++++++++++- net/ipv4/tcp_ipv4.c | 7 +- net/ipv4/tcp_minisocks.c | 92 ++- net/ipv4/tcp_output.c | 296 ++++++++- net/ipv6/syncookies.c | 1 + net/ipv6/tcp_ipv6.c | 1 + 14 files changed, 1237 insertions(+), 98 deletions(-) -- 2.34.1

4 months, 3 weeks

4
25
0 0

[PATCH v3] kselftest: x86: Improve MOV SS test result message

by Brigham Campbell

Make test result message more descriptive and grammatically correct. Signed-off-by: Brigham Campbell <me(a)brighamcampbell.com> --- No changes in v3. I'm resending this patch to adjust patch format suggestions made by Shuah. tools/testing/selftests/x86/mov_ss_trap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/x86/mov_ss_trap.c b/tools/testing/selftests/x86/mov_ss_trap.c index f22cb6b382f9..d80033c0d7eb 100644 --- a/tools/testing/selftests/x86/mov_ss_trap.c +++ b/tools/testing/selftests/x86/mov_ss_trap.c @@ -269,6 +269,6 @@ int main() ); } - printf("[OK]\tI aten't dead\n"); + printf("[OK]\tkernel handled MOV SS without crashing test\n"); return 0; } -- 2.49.0

4 months, 3 weeks

1
0
0 0

[PATCH net-next v2 0/8] Devmem TCP minor cleanups and ksft improvements

by Mina Almasry

v2: https://lore.kernel.org/netdev/20250519023517.4062941-1-almasrymina@google.… Changelog: - Collect acks and tested-bys (Thanks!) - Drop the patch that removed ksft_disruptive. That seems to not have any relation to behavior when test fails. - Address comments. --- Minor cleanups to the devmem tcp code, and not-so-minor improvements to the ksft. For the cleanups: - Address comment from Paolo post-merge. - Fix whitespace. - Add improvement dropped from Taehee's fix patch. For the ksft: - Add support for ipv4 environment. - Add support for drivers that are limited to 5-tuple flow steering. - Improve test by sending 1K data instead of just "hello\nworld" Cc: sdf(a)fomichev.me Cc: ap420073(a)gmail.com Cc: praan(a)google.com Cc: shivajikant(a)google.com Mina Almasry (8): net: devmem: move list_add to net_devmem_bind_dmabuf. page_pool: fix ugly page_pool formatting net: devmem: preserve sockc_err net: devmem: ksft: add ipv4 support net: devmem: ksft: add exit_wait to make rx test pass net: devmem: ksft: add 5 tuple FS support net: devmem: ksft: upgrade rx test to send 1K data net: devmem: ncdevmem: remove unused variable net/core/devmem.c | 5 +++- net/core/devmem.h | 5 +++- net/core/netdev-genl.c | 8 ++----- net/core/page_pool.c | 4 ++-- net/ipv4/tcp.c | 24 ++++++++----------- .../selftests/drivers/net/hw/devmem.py | 18 +++++++------- .../selftests/drivers/net/hw/ncdevmem.c | 16 ++++++++++--- 7 files changed, 44 insertions(+), 36 deletions(-) base-commit: ea15e046263b19e91ffd827645ae5dfa44ebd044 -- 2.49.0.1151.ga128411c76-goog

4 months, 3 weeks

3
14
0 0

[PATCH v17 net-next 0/5] DUALPI2 patch

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find the DualPI2 patch v17. This patch serise adds DualPI Improved with a Square (DualPI2) with following features: * Supports congestion controls that comply with the Prague requirements in RFC9331 (e.g. TCP-Prague) * Coupled dual-queue that separates the L4S traffic in a low latency queue (L-queue), without harming remaining traffic that is scheduled in classic queue (C-queue) due to congestion-coupling using PI2 as defined in RFC9332 * Configurable overload strategies * Use of sojourn time to reliably estimate queue delay * Supports ECN L4S-identifier (IP.ECN==0b*1) to classify traffic into respective queues For more details of DualPI2, please refer IETF RFC9332 (https://datatracker.ietf.org/doc/html/rfc9332). Best regards, Chia-Yu --- v17 (25-May-2025) - Replace 0xffffffff with U32_MAX (Paolo Abeni <pabeni(a)redhat.com>) - Use helper function qdisc_dequeue_internal() and add new helper function skb_apply_step() (Paolo Abeni <pabeni(a)redhat.com>) - Add s64 casting when calculating the delta of the PI controller (Paolo Abeni <pabeni(a)redhat.com>) - Change the drop reason into SKB_DROP_REASON_QDISC_CONGESTED for drop_early (Paolo Abeni <pabeni(a)redhat.com>) - Modify the condition to remove the original skb when enqueuing multiple GSO segments (Paolo Abeni <pabeni(a)redhat.com>) - Add READ_ONCE() in dualpi2_dump_stat() (Paolo Abeni <pabeni(a)redhat.com>) - Add comments, brackets, and brackets for readability (Paolo Abeni <pabeni(a)redhat.com>) v16 (16-MAy-2025) - Add qdisc_lock() to dualpi2_timer() in dualpi2_timer (Paolo Abeni <pabeni(a)redhat.com>) - Introduce convert_ns_to_usec() to convert usec to nsec without overflow in #1 (Paolo Abeni <pabeni(a)redhat.com>) - Update convert_us_tonsec() to convert nsec to usec without overflow in #2 (Paolo Abeni <pabeni(a)redhat.com>) - Add more descriptions with respect to DualPI2 in the cover ltter and add changelog in each patch (Paolo Abeni <pabeni(a)redhat.com>) v15 (09-May-2025) - Add enum of TCA_DUALPI2_ECN_MASK_CLA_ECT to remove potential leakeage in #1 (Simon Horman <horms(a)kernel.org>) - Fix one typo in comment of #2 - Update tc.yaml in #5 to aligh with the updated enum of pkt_sched.h v14 (05-May-2025) - Modify tc.yaml: (1) Replace flags with enum and remove enum-as-flags, (2) Remove credit-queue in xstats, and (3) Change attribute types (Donald Hunter <donald.hun - Add enum and fix the ordering of variables in pkt_sched.h to align with the modified tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Add validators for DROP_OVERLOAD, DROP_EARLY, ECN_MASK, and SPLIT_GSO in sch_dualpi2.c (Donald Hunter <donald.hunter(a)gmail.com>) - Update dualpi2.json to align with the updated variable order in pkt_sched.h - Reorder patches (Donald Hunter <donald.hunter(a)gmail.com>) v13 (26-Apr-2025) - Use dashes in member names to follow YNL conventions in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Define enumerations separately for flags of drop-early, drop-overload, ecn-mask, credit-queue in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Change the types of split-gso and step-packets into flag in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Revert to u32/u8 types for tc-dualpi2-xstats members in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Add new test cases in tc-tests/qdiscs/dualpi2.json to cover all dualpi2 parameters (Donald Hunter <donald.hunter(a)gmail.com>) - Change the type of TCA_DUALPI2_STEP_PACKETS into NLA_FLAG (Donald Hunter <donald.hunter(a)gmail.com>) v12 (22-Apr-2025) - Remove anonymous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Replace u32/u8 with uint and s32 with int in tc spec document (Paolo Abeni <pabeni(a)redhat.com>) - Introduce get_memory_limit function to handle potential overflow when multipling limit with MTU (Paolo Abeni <pabeni(a)redhat.com>) - Double the packet length to further include packet overhead in memory_limit (Paolo Abeni <pabeni(a)redhat.com>) - Remove the check of qdisc_qlen(sch) when calling qdisc_tree_reduce_backlog (Paolo Abeni <pabeni(a)redhat.com>) v11 (15-Apr-2025) - Replace hstimer_init with hstimer_setup in sch_dualpi2.c v10 (25-Mar-2025) - Remove leftover include in include/linux/netdevice.h and anonymous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Use kfree_skb_reason() and add SKB_DROP_REASON_DUALPI2_STEP_DROP drop reason (Paolo Abeni <pabeni(a)redhat.com>) - Split sch_dualpi2.c into 3 patches (and overall 5 patches): Struct definition & parsing, Dump stats & configuration, Enqueue/Dequeue (Paolo Abeni <pabeni(a)redhat.com>) v9 (16-Mar-2025) - Fix mem_usage error in previous version - Add min_qlen_step to the dualpi2 attribute as the minimum queue length in number of packets in the L-queue to start step threshold marking. In previous versions, this value was fixed to 2, so the step threshold was applied to mark packets in the L queue only when the queue length of the L queue was greater than or equal to 2 packets. This will cause larger queuing delays for L4S traffic at low rates (<20Mbps). So we parameterize it and change the default value to 0. Comparison of tcp_1down run 'HTB 20Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 11.55 11.70 ms 350 TCP upload avg : 18.96 N/A Mbits/s 350 TCP upload sum : 18.96 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 10.81 10.70 ms 350 TCP upload avg : 18.91 N/A Mbits/s 350 TCP upload sum : 18.91 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 12.61 12.80 ms 350 TCP upload avg : 9.48 N/A Mbits/s 350 TCP upload sum : 9.48 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.06 10.80 ms 350 TCP upload avg : 9.43 N/A Mbits/s 350 TCP upload sum : 9.43 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 40.86 37.45 ms 350 TCP upload avg : 0.88 N/A Mbits/s 350 TCP upload sum : 0.88 N/A Mbits/s 350 TCP upload::1 : 0.88 0.97 Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.07 10.40 ms 350 TCP upload avg : 0.55 N/A Mbits/s 350 TCP upload sum : 0.55 N/A Mbits/s 350 TCP upload::1 : 0.55 0.59 Mbits/s 350 v8 (11-Mar-2025) - Fix warning messages in v7 v7 (07-Mar-2025) - Separate into 3 patches to avoid mixing changes of documentation, selftest, and code. (Cong Wang <xiyou.wangcong(a)gmail.com>) v6 (04-Mar-2025) - Add modprobe for dulapi2 in tc-testing script tc-testing/tdc.sh (Jakub Kicinski <kuba(a)kernel.org>) - Update test cases in dualpi2.json - Update commit message v5 (22-Feb-2025) - A comparison was done between MQ + DUALPI2, MQ + FQ_PIE, MQ + FQ_CODEL: Unshaped 1gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 - Summary of tcp_4down run 'MQ + FQ_PIE' avg median # data pts Ping (ms) ICMP : 1.21 1.37 ms 350 TCP download avg : 235.42 N/A Mbits/s 350 TCP download sum : 941.61 N/A Mbits/s 350 TCP download::1 : 232.54 233.13 Mbits/s 350 TCP download::2 : 232.52 232.80 Mbits/s 350 TCP download::3 : 233.14 233.78 Mbits/s 350 TCP download::4 : 243.41 241.48 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2' avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 Unshaped 1gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 Unshaped 10gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 0.22 0.23 ms 350 TCP download avg : 2354.08 N/A Mbits/s 350 TCP download sum : 9416.31 N/A Mbits/s 350 TCP download::1 : 2353.65 2352.81 Mbits/s 350 TCP download::2 : 2354.54 2354.21 Mbits/s 350 TCP download::3 : 2353.56 2353.78 Mbits/s 350 TCP download::4 : 2354.56 2354.45 Mbits/s 350 - Summary of tcp_4down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 0.20 0.19 ms 350 TCP download avg : 2354.76 N/A Mbits/s 350 TCP download sum : 9419.04 N/A Mbits/s 350 TCP download::1 : 2354.77 2353.89 Mbits/s 350 TCP download::2 : 2353.41 2354.29 Mbits/s 350 TCP download::3 : 2356.18 2354.19 Mbits/s 350 TCP download::4 : 2354.68 2353.15 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 0.24 0.24 ms 350 TCP download avg : 2354.11 N/A Mbits/s 350 TCP download sum : 9416.43 N/A Mbits/s 350 TCP download::1 : 2354.75 2353.93 Mbits/s 350 TCP download::2 : 2353.15 2353.75 Mbits/s 350 TCP download::3 : 2353.49 2353.72 Mbits/s 350 TCP download::4 : 2355.04 2353.73 Mbits/s 350 Unshaped 10gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 7.57 8.69 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9467.82 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 7.82 8.91 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9468.42 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 6.87 7.93 ms 350 TCP download avg : 73.95 N/A Mbits/s 350 TCP download sum : 9465.87 N/A Mbits/s 350 From the results shown above, we see small differences between combinations. - Update commit message to include results of no_split_gso and split_gso (Dave Taht <dave.taht(a)gmail.com> and Paolo Abeni <pabeni(a)redhat.com>) - Add memlimit in the dualpi2 attribute, and add memory_used, max_memory_used, memory_limit in dualpi2 stats (Dave Taht <dave.taht(a)gmail.com>) - Update note in sch_dualpi2.c related to BBRv3 status (Dave Taht <dave.taht(a)gmail.com>) - Update license identifier (Dave Taht <dave.taht(a)gmail.com>) - Add selftest in tools/testing/selftests/tc-testing (Cong Wang <xiyou.wangcong(a)gmail.com>) - Use netlink policies for parameter checks (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Modify texts & fix typos in Documentation/netlink/specs/tc.yaml (Dave Taht <dave.taht(a)gmail.com>) - Add descriptions of packet counter statistics and the reset function of sch_dualpi2.c - Fix step_thresh in packets - Update code comments in sch_dualpi2.c v4 (22-Oct-2024) - Update statement in Kconfig for DualPI2 (Stephen Hemminger <stephen(a)networkplumber.org>) - Put a blank line after #define in sch_dualpi2.c (Stephen Hemminger <stephen(a)networkplumber.org>) - Fix line length warning. v3 (19-Oct-2024) - Fix compilaiton error - Update Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Oct-2024) - Add Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) - Use dualpi2 instead of skb prefix (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Replace nla_parse_nested_deprecated with nla_parse_nested (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Fix line length warning --- Chia-Yu Chang (4): sched: Struct definition and parsing of dualpi2 qdisc sched: Dump configuration and statistics of dualpi2 qdisc selftests/tc-testing: Add selftests for qdisc DualPI2 Documentation: netlink: specs: tc: Add DualPI2 specification Koen De Schepper (1): sched: Add enqueue/dequeue of dualpi2 qdisc Documentation/netlink/specs/tc.yaml | 156 +++ include/net/dropreason-core.h | 6 + include/uapi/linux/pkt_sched.h | 68 + net/sched/Kconfig | 12 + net/sched/Makefile | 1 + net/sched/sch_dualpi2.c | 1146 +++++++++++++++++ tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/dualpi2.json | 254 ++++ tools/testing/selftests/tc-testing/tdc.sh | 1 + 9 files changed, 1645 insertions(+) create mode 100644 net/sched/sch_dualpi2.c create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/dualpi2.json -- 2.34.1

4 months, 3 weeks

2
6
0 0

[PATCH net-next 1/3] net: devmem: support single IOV with sendmsg

by Stanislav Fomichev

sendmsg() with a single iov becomes ITER_UBUF, sendmsg() with multiple iovs becomes ITER_IOVEC. iter_iov_len does not return correct value for UBUF, so teach to treat UBUF differently. Cc: Al Viro <viro(a)zeniv.linux.org.uk> Cc: Pavel Begunkov <asml.silence(a)gmail.com> Cc: Mina Almasry <almasrymina(a)google.com> Fixes: bd61848900bf ("net: devmem: Implement TX path") Signed-off-by: Stanislav Fomichev <stfomichev(a)gmail.com> --- include/linux/uio.h | 8 +++++++- net/core/datagram.c | 3 ++- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/include/linux/uio.h b/include/linux/uio.h index 49ece9e1888f..393d0622cc28 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -99,7 +99,13 @@ static inline const struct iovec *iter_iov(const struct iov_iter *iter) } #define iter_iov_addr(iter) (iter_iov(iter)->iov_base + (iter)->iov_offset) -#define iter_iov_len(iter) (iter_iov(iter)->iov_len - (iter)->iov_offset) + +static inline size_t iter_iov_len(const struct iov_iter *i) +{ + if (i->iter_type == ITER_UBUF) + return i->count; + return iter_iov(i)->iov_len - i->iov_offset; +} static inline enum iter_type iov_iter_type(const struct iov_iter *i) { diff --git a/net/core/datagram.c b/net/core/datagram.c index 9ef5442536f5..c44f1d2b70a4 100644 --- a/net/core/datagram.c +++ b/net/core/datagram.c @@ -706,7 +706,8 @@ zerocopy_fill_skb_from_devmem(struct sk_buff *skb, struct iov_iter *from, * iov_addrs are interpreted as an offset in bytes into the dma-buf to * send from. We do not support other iter types. */ - if (iov_iter_type(from) != ITER_IOVEC) + if (iov_iter_type(from) != ITER_IOVEC && + iov_iter_type(from) != ITER_UBUF) return -EFAULT; while (length && iov_iter_count(from)) { -- 2.49.0

4 months, 3 weeks

4
12
0 0

[PATCHv2 net-next] selftests: net: move wait_local_port_listen to lib.sh

by Hangbin Liu

The function wait_local_port_listen() is the only function defined in net_helper.sh. Since some tests source both lib.sh and net_helper.sh, we can simplify the setup by moving wait_local_port_listen() to lib.sh. With this change, net_helper.sh becomes redundant and can be removed. Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- v2: remove net_helper in selftests/drivers (Matthieu Baerts) --- tools/testing/selftests/drivers/net/Makefile | 1 - .../drivers/net/lib/sh/lib_netcons.sh | 1 - .../selftests/drivers/net/netdevsim/peer.sh | 2 +- tools/testing/selftests/net/Makefile | 2 +- tools/testing/selftests/net/busy_poll_test.sh | 2 +- .../net/ipv6_route_update_soft_lockup.sh | 1 - tools/testing/selftests/net/lib.sh | 21 ++++++++++++++++ tools/testing/selftests/net/mptcp/Makefile | 2 +- .../testing/selftests/net/mptcp/mptcp_lib.sh | 1 - tools/testing/selftests/net/net_helper.sh | 25 ------------------- tools/testing/selftests/net/pmtu.sh | 1 - tools/testing/selftests/net/udpgro.sh | 2 +- tools/testing/selftests/net/udpgro_bench.sh | 2 +- tools/testing/selftests/net/udpgro_frglist.sh | 2 +- tools/testing/selftests/net/udpgro_fwd.sh | 2 +- 15 files changed, 29 insertions(+), 38 deletions(-) delete mode 100644 tools/testing/selftests/net/net_helper.sh diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index 17db31aa58c9..be780bcb73a3 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -3,7 +3,6 @@ CFLAGS += $(KHDR_INCLUDES) TEST_INCLUDES := $(wildcard lib/py/*.py) \ $(wildcard lib/sh/*.sh) \ - ../../net/net_helper.sh \ ../../net/lib.sh \ TEST_GEN_FILES := \ diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh index 3c96b022954d..29b01b8e2215 100644 --- a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh +++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh @@ -33,7 +33,6 @@ NSIM_DEV_SYS_NEW="/sys/bus/netdevsim/new_device" # Used to create and delete namespaces source "${LIBDIR}"/../../../../net/lib.sh -source "${LIBDIR}"/../../../../net/net_helper.sh # Create netdevsim interfaces create_ifaces() { diff --git a/tools/testing/selftests/drivers/net/netdevsim/peer.sh b/tools/testing/selftests/drivers/net/netdevsim/peer.sh index aed62d9e6c0a..1bb46ec435d4 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/peer.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/peer.sh @@ -1,7 +1,7 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0-only -source ../../../net/net_helper.sh +source ../../../net/lib.sh NSIM_DEV_1_ID=$((256 + RANDOM % 256)) NSIM_DEV_1_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_DEV_1_ID diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 70a38f485d4d..ea84b88bcb30 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -115,7 +115,7 @@ YNL_GEN_FILES := busy_poller netlink-dumps TEST_GEN_FILES += $(YNL_GEN_FILES) TEST_FILES := settings -TEST_FILES += in_netns.sh lib.sh net_helper.sh setup_loopback.sh setup_veth.sh +TEST_FILES += in_netns.sh lib.sh setup_loopback.sh setup_veth.sh TEST_GEN_FILES += $(patsubst %.c,%.o,$(wildcard *.bpf.c)) diff --git a/tools/testing/selftests/net/busy_poll_test.sh b/tools/testing/selftests/net/busy_poll_test.sh index 7db292ec4884..7d2d40812074 100755 --- a/tools/testing/selftests/net/busy_poll_test.sh +++ b/tools/testing/selftests/net/busy_poll_test.sh @@ -1,6 +1,6 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -source net_helper.sh +source lib.sh NSIM_SV_ID=$((256 + RANDOM % 256)) NSIM_SV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_SV_ID diff --git a/tools/testing/selftests/net/ipv6_route_update_soft_lockup.sh b/tools/testing/selftests/net/ipv6_route_update_soft_lockup.sh index a6b2b1f9c641..c6866e42f95c 100755 --- a/tools/testing/selftests/net/ipv6_route_update_soft_lockup.sh +++ b/tools/testing/selftests/net/ipv6_route_update_soft_lockup.sh @@ -69,7 +69,6 @@ # which can affect the conditions needed to trigger a soft lockup. source lib.sh -source net_helper.sh TEST_DURATION=300 ROUTING_TABLE_REFRESH_PERIOD=0.01 diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index 7962da06f816..006fdadcc4b9 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -595,3 +595,24 @@ bridge_vlan_add() bridge vlan add "$@" defer bridge vlan del "$@" } + +wait_local_port_listen() +{ + local listener_ns="${1}" + local port="${2}" + local protocol="${3}" + local pattern + local i + + pattern=":$(printf "%04X" "${port}") " + + # for tcp protocol additionally check the socket state + [ ${protocol} = "tcp" ] && pattern="${pattern}0A" + for i in $(seq 10); do + if ip netns exec "${listener_ns}" awk '{print $2" "$4}' \ + /proc/net/"${protocol}"* | grep -q "${pattern}"; then + break + fi + sleep 0.1 + done +} diff --git a/tools/testing/selftests/net/mptcp/Makefile b/tools/testing/selftests/net/mptcp/Makefile index 340e1a777e16..e47788bfa671 100644 --- a/tools/testing/selftests/net/mptcp/Makefile +++ b/tools/testing/selftests/net/mptcp/Makefile @@ -11,7 +11,7 @@ TEST_GEN_FILES = mptcp_connect pm_nl_ctl mptcp_sockopt mptcp_inq mptcp_diag TEST_FILES := mptcp_lib.sh settings -TEST_INCLUDES := ../lib.sh $(wildcard ../lib/sh/*.sh) ../net_helper.sh +TEST_INCLUDES := ../lib.sh $(wildcard ../lib/sh/*.sh) EXTRA_CLEAN := *.pcap diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh index 55212188871e..09cd24b2ae46 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh @@ -2,7 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 . "$(dirname "${0}")/../lib.sh" -. "$(dirname "${0}")/../net_helper.sh" readonly KSFT_PASS=0 readonly KSFT_FAIL=1 diff --git a/tools/testing/selftests/net/net_helper.sh b/tools/testing/selftests/net/net_helper.sh deleted file mode 100644 index 6596fe03c77f..000000000000 --- a/tools/testing/selftests/net/net_helper.sh +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -# Helper functions - -wait_local_port_listen() -{ - local listener_ns="${1}" - local port="${2}" - local protocol="${3}" - local pattern - local i - - pattern=":$(printf "%04X" "${port}") " - - # for tcp protocol additionally check the socket state - [ ${protocol} = "tcp" ] && pattern="${pattern}0A" - for i in $(seq 10); do - if ip netns exec "${listener_ns}" awk '{print $2" "$4}' \ - /proc/net/"${protocol}"* | grep -q "${pattern}"; then - break - fi - sleep 0.1 - done -} diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh index 66be7699c72c..88e914c4eef9 100755 --- a/tools/testing/selftests/net/pmtu.sh +++ b/tools/testing/selftests/net/pmtu.sh @@ -205,7 +205,6 @@ # Check that PMTU exceptions are created for both paths. source lib.sh -source net_helper.sh PAUSE_ON_FAIL=no VERBOSE=0 diff --git a/tools/testing/selftests/net/udpgro.sh b/tools/testing/selftests/net/udpgro.sh index d5ffd8c9172e..1dc337c709f8 100755 --- a/tools/testing/selftests/net/udpgro.sh +++ b/tools/testing/selftests/net/udpgro.sh @@ -3,7 +3,7 @@ # # Run a series of udpgro functional tests. -source net_helper.sh +source lib.sh readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)" diff --git a/tools/testing/selftests/net/udpgro_bench.sh b/tools/testing/selftests/net/udpgro_bench.sh index 815fad8c53a8..54fa4821bc5e 100755 --- a/tools/testing/selftests/net/udpgro_bench.sh +++ b/tools/testing/selftests/net/udpgro_bench.sh @@ -3,7 +3,7 @@ # # Run a series of udpgro benchmarks -source net_helper.sh +source lib.sh readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)" diff --git a/tools/testing/selftests/net/udpgro_frglist.sh b/tools/testing/selftests/net/udpgro_frglist.sh index 5f3d1a110d11..9a2cfec1153e 100755 --- a/tools/testing/selftests/net/udpgro_frglist.sh +++ b/tools/testing/selftests/net/udpgro_frglist.sh @@ -3,7 +3,7 @@ # # Run a series of udpgro benchmarks -source net_helper.sh +source lib.sh readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)" diff --git a/tools/testing/selftests/net/udpgro_fwd.sh b/tools/testing/selftests/net/udpgro_fwd.sh index f22f6c66997e..a39fdc4aa2ff 100755 --- a/tools/testing/selftests/net/udpgro_fwd.sh +++ b/tools/testing/selftests/net/udpgro_fwd.sh @@ -1,7 +1,7 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -source net_helper.sh +source lib.sh BPF_FILE="lib/xdp_dummy.bpf.o" readonly BASE="ns-$(mktemp -u XXXXXX)" -- 2.46.0

4 months, 3 weeks

3
2
0 0

[PATCH] selftests: net: fix spelling and grammar mistakes

by Praveen Balakrishnan

Fix several spelling and grammatical mistakes in output messages from the net selftests to improve readability. Only the message strings for the test output have been modified. No changes to the functional logic of the tests have been made. Signed-off-by: Praveen Balakrishnan <praveen.balakrishnan(a)magd.ox.ac.uk> --- .../testing/selftests/net/netfilter/conntrack_vrf.sh | 4 ++-- tools/testing/selftests/net/openvswitch/ovs-dpctl.py | 2 +- tools/testing/selftests/net/rps_default_mask.sh | 12 ++++++------ 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/net/netfilter/conntrack_vrf.sh b/tools/testing/selftests/net/netfilter/conntrack_vrf.sh index e95ecb37c2b1..806d2bfbd6e7 100755 --- a/tools/testing/selftests/net/netfilter/conntrack_vrf.sh +++ b/tools/testing/selftests/net/netfilter/conntrack_vrf.sh @@ -236,9 +236,9 @@ EOF ip netns exec "$ns1" ping -q -w 1 -c 1 "$DUMMYNET".2 > /dev/null if ip netns exec "$ns0" nft list counter t fibcount | grep -q "packets 1"; then - echo "PASS: fib lookup returned exepected output interface" + echo "PASS: fib lookup returned expected output interface" else - echo "FAIL: fib lookup did not return exepected output interface" + echo "FAIL: fib lookup did not return expected output interface" ret=1 return fi diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py index 8a0396bfaf99..b521e0dea506 100644 --- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py +++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py @@ -1877,7 +1877,7 @@ class OvsPacket(GenericNetlinkSocket): elif msg["cmd"] == OvsPacket.OVS_PACKET_CMD_EXECUTE: up.execute(msg) else: - print("Unkonwn cmd: %d" % msg["cmd"]) + print("Unknown cmd: %d" % msg["cmd"]) except NetlinkError as ne: raise ne diff --git a/tools/testing/selftests/net/rps_default_mask.sh b/tools/testing/selftests/net/rps_default_mask.sh index 4287a8529890..b200019b3c80 100755 --- a/tools/testing/selftests/net/rps_default_mask.sh +++ b/tools/testing/selftests/net/rps_default_mask.sh @@ -54,16 +54,16 @@ cleanup echo 1 > /proc/sys/net/core/rps_default_mask setup -chk_rps "changing rps_default_mask dont affect existing devices" "" lo $INITIAL_RPS_DEFAULT_MASK +chk_rps "changing rps_default_mask doesn't affect existing devices" "" lo $INITIAL_RPS_DEFAULT_MASK echo 3 > /proc/sys/net/core/rps_default_mask -chk_rps "changing rps_default_mask dont affect existing netns" $NETNS lo 0 +chk_rps "changing rps_default_mask doesn't affect existing netns" $NETNS lo 0 ip link add name $VETH type veth peer netns $NETNS name $VETH ip link set dev $VETH up ip -n $NETNS link set dev $VETH up -chk_rps "changing rps_default_mask affect newly created devices" "" $VETH 3 -chk_rps "changing rps_default_mask don't affect newly child netns[II]" $NETNS $VETH 0 +chk_rps "changing rps_default_mask affects newly created devices" "" $VETH 3 +chk_rps "changing rps_default_mask doesn't affect newly child netns[II]" $NETNS $VETH 0 ip link del dev $VETH ip netns del $NETNS @@ -72,8 +72,8 @@ chk_rps "rps_default_mask is 0 by default in child netns" "$NETNS" lo 0 ip netns exec $NETNS sysctl -qw net.core.rps_default_mask=1 ip link add name $VETH type veth peer netns $NETNS name $VETH -chk_rps "changing rps_default_mask in child ns don't affect the main one" "" lo $INITIAL_RPS_DEFAULT_MASK +chk_rps "changing rps_default_mask in child ns doesn't affect the main one" "" lo $INITIAL_RPS_DEFAULT_MASK chk_rps "changing rps_default_mask in child ns affects new childns devices" $NETNS $VETH 1 -chk_rps "changing rps_default_mask in child ns don't affect existing devices" $NETNS lo 0 +chk_rps "changing rps_default_mask in child ns doesn't affect existing devices" $NETNS lo 0 exit $ret -- 2.39.5

4 months, 3 weeks

5
5
0 0

[PATCH net-next v8] selftests/vsock: add initial vmtest.sh for vsock

by Bobby Eshleman

This commit introduces a new vmtest.sh runner for vsock. It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H, H2G, and loopback. The testing tools from tools/testing/vsock/ are reused. Currently, only vsock_test is used. VMCI and hyperv support is included in the config file to be built with the -b option, though not used in the tests. Only tested on x86. To run: $ make -C tools/testing/selftests TARGETS=vsock $ tools/testing/selftests/vsock/vmtest.sh or $ make -C tools/testing/selftests TARGETS=vsock run_tests Example runs (after make -C tools/testing/selftests TARGETS=vsock): $ ./tools/testing/selftests/vsock/vmtest.sh 1..3 ok 0 vm_server_host_client ok 1 vm_client_host_server ok 2 vm_loopback SUMMARY: PASS=3 SKIP=0 FAIL=0 Log: /tmp/vsock_vmtest_m7DI.log $ ./tools/testing/selftests/vsock/vmtest.sh vm_loopback 1..1 ok 0 vm_loopback SUMMARY: PASS=1 SKIP=0 FAIL=0 Log: /tmp/vsock_vmtest_a1IO.log $ mkdir -p ~/scratch $ make -C tools/testing/selftests install TARGETS=vsock INSTALL_PATH=~/scratch [... omitted ...] $ cd ~/scratch $ ./run_kselftest.sh TAP version 13 1..1 # timeout set to 300 # selftests: vsock: vmtest.sh # 1..3 # ok 0 vm_server_host_client # ok 1 vm_client_host_server # ok 2 vm_loopback # SUMMARY: PASS=3 SKIP=0 FAIL=0 # Log: /tmp/vsock_vmtest_svEl.log ok 1 selftests: vsock: vmtest.sh Future work can include vsock_diag_test. Because vsock requires a VM to test anything other than loopback, this patch adds vmtest.sh as a kselftest itself. This is different than other systems that have a "vmtest.sh", where it is used as a utility script to spin up a VM to run the selftests as a guest (but isn't hooked into kselftest). Signed-off-by: Bobby Eshleman <bobbyeshleman(a)gmail.com> --- Changes in v8: - remove NIPA comment from commit msg - remove tap_* functions and TAP_PREFIX - add -b for building kernel - Link to v7: https://lore.kernel.org/r/20250515-vsock-vmtest-v7-1-ba6fa86d6c2c@gmail.com Changes in v7: - fix exit code bug when ran is kselftest: use cnt_total instead of KSFT_NUM_TESTS - updated commit message with updated output - updated commit message with commands for installing/running as kselftest - Link to v6: https://lore.kernel.org/r/20250515-vsock-vmtest-v6-1-9af1cc023900@gmail.com Changes in v6: - add make cmd in commit message in vmtest.sh example (Stefano) - check nonzero size of QEMU_PIDFILE using -s conditional (Stefano) - display log file path after tests so it is easier to find amongst other random names - cleanup qemu pidfile if qemu is unable to remove it - make oops/warning failures more obvious with 'FAIL' prefix in log (simply saying 'detected' wasn't clear enough to identify failing condition) - Link to v5: https://lore.kernel.org/r/20250513-vsock-vmtest-v5-1-4e75c4a45ceb@gmail.com Changes in v5: - make log file a tmpfile (Paolo) - make sure both default and user defined QEMU gets handled by the dependency check (Paolo) - increased VM boot up timeout from 1m to 3m for slow hosts (Paolo) - rename vm_setup -> vm_start (Paolo) - derive wait_for_listener from selftests/net/net_helper.sh to removes ss usage - Remove unused 'unset IFS' line (Paolo) - leave space after variable declarations (Paolo) - make QEMU_PIDFILE a tmp file (Paolo) - make everything readonly that is only read (Paolo) - source ktap_helpers.sh for KSFT_PASS and friends (Paolo) - don't check for timeout util (Paolo) - add missing usage string for -q qemu arg - add tap prefix to SUMMARY line since it isn't part of TAP protocol - exit with the correct status code based on failure/pass counts - Link to v4: https://lore.kernel.org/r/20250507-vsock-vmtest-v4-1-6e2a97262cd6@gmail.com Changes in v4: - do not use special tab delimiter for help string parsing (Stefano + Paolo) - fix paths for when installing kselftest and running out-of-tree (Paolo) - change vng to using running kernel instead of compiled kernel (Paolo) - use multi-line string for QEMU_OPTS (Stefano) - change timeout to 300s (Paolo) - skip if tools are not found and use kselftests status codes (Paolo) - remove build from vmtest.sh (Paolo) - change 2222 -> SSH_HOST_PORT (Stefano) - add tap-format output - add vmtest.log to gitignore - check for vsock_test binary and remind user to build it if missing - create a proper build in makefile - style fixes - add ssh, timeout, and pkill to dependency check, just in case - fix numerical comparison in conditionals - check qemu pidfile exists before proceeding (avoid wasting time waiting for ssh) - fix tracking of pass/fail bug - fix stderr redirection bug - Link to v3: https://lore.kernel.org/r/20250428-vsock-vmtest-v3-1-181af6163f3e@gmail.com Changes in v3: - use common conditional syntax for checking variables - use return value instead of global rc - fix typo TEST_HOST_LISTENER_PORT -> TEST_HOST_PORT_LISTENER - use SIGTERM instead of SIGKILL on cleanup - use peer-cid=1 for loopback - change sleep delay times into globals - fix test_vm_loopback logging - add test selection in arguments - make QEMU an argument - check that vng binary is on path - use QEMU variable - change <tab><backslash> to <space><backslash> - fix hardcoded file paths - add comment in commit msg about script that vmtest.sh was based off of - Add tools/testing/selftest/vsock/Makefile for kselftest - Link to v2: https://lore.kernel.org/r/20250417-vsock-vmtest-v2-1-3901a27331e8@gmail.com Changes in v2: - add kernel oops and warnings checker - change testname variable to use FUNCNAME - fix spacing in test_vm_server_host_client - add -s skip build option to vmtest.sh - add test_vm_loopback - pass port to vm_wait_for_listener - fix indentation in vmtest.sh - add vmci and hyperv to config - changed whitespace from tabs to spaces in help string - Link to v1: https://lore.kernel.org/r/20250410-vsock-vmtest-v1-1-f35a81dab98c@gmail.com --- MAINTAINERS | 1 + tools/testing/selftests/vsock/.gitignore | 2 + tools/testing/selftests/vsock/Makefile | 16 ++ tools/testing/selftests/vsock/config | 114 ++++++++ tools/testing/selftests/vsock/settings | 1 + tools/testing/selftests/vsock/vmtest.sh | 460 +++++++++++++++++++++++++++++++ 6 files changed, 594 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 657a67f9031ef7798c19ac63e6383d4cb18a9e1f..3fbdd7bbfce7196a3cc7db70203317c6bd0e51fd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -25751,6 +25751,7 @@ F: include/uapi/linux/vm_sockets.h F: include/uapi/linux/vm_sockets_diag.h F: include/uapi/linux/vsockmon.h F: net/vmw_vsock/ +F: tools/testing/selftests/vsock/ F: tools/testing/vsock/ VMALLOC diff --git a/tools/testing/selftests/vsock/.gitignore b/tools/testing/selftests/vsock/.gitignore new file mode 100644 index 0000000000000000000000000000000000000000..9c5bf379480f829a14713d5f5dc7d525bc272e84 --- /dev/null +++ b/tools/testing/selftests/vsock/.gitignore @@ -0,0 +1,2 @@ +vmtest.log +vsock_test diff --git a/tools/testing/selftests/vsock/Makefile b/tools/testing/selftests/vsock/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..7ab4970e5e8a019be33f96a36f95c00573d7bfcf --- /dev/null +++ b/tools/testing/selftests/vsock/Makefile @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 + +CURDIR := $(abspath .) +TOOLSDIR := $(abspath ../../..) + +$(OUTPUT)/vsock_test: $(TOOLSDIR)/testing/vsock/vsock_test + install -m 755 $< $@ + +$(TOOLSDIR)/testing/vsock/vsock_test: + $(MAKE) -C $(TOOLSDIR)/testing/vsock vsock_test + +TEST_PROGS += vmtest.sh +TEST_GEN_FILES := vsock_test + +include ../lib.mk + diff --git a/tools/testing/selftests/vsock/config b/tools/testing/selftests/vsock/config new file mode 100644 index 0000000000000000000000000000000000000000..3bffaaf98fff92dc0e3bc1286afa3d8d5d52f4c7 --- /dev/null +++ b/tools/testing/selftests/vsock/config @@ -0,0 +1,114 @@ +CONFIG_BLK_DEV_INITRD=y +CONFIG_BPF=y +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT=y +CONFIG_HAVE_EBPF_JIT=y +CONFIG_BPF_EVENTS=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_DYNAMIC_FTRACE=y +CONFIG_HAVE_KPROBES=y +CONFIG_KPROBES=y +CONFIG_KPROBE_EVENTS=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_UPROBES=y +CONFIG_UPROBE_EVENTS=y +CONFIG_DEBUG_FS=y +CONFIG_FW_CFG_SYSFS=y +CONFIG_FW_CFG_SYSFS_CMDLINE=y +CONFIG_DRM=y +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_DRM_VIRTIO_GPU_KMS=y +CONFIG_DRM_BOCHS=y +CONFIG_VIRTIO_IOMMU=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_PCI=y +CONFIG_SND_INTEL8X0=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SECURITYFS=y +CONFIG_CGROUP_BPF=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y +CONFIG_FUSE_FS=y +CONFIG_SERIO=y +CONFIG_PCI=y +CONFIG_INPUT=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_X86_VERBOSE_BOOTUP=y +CONFIG_VGA_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_VESA=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_KVM_GUEST=y +CONFIG_KVM=y +CONFIG_KVM_INTEL=y +CONFIG_KVM_AMD=y +CONFIG_VSOCKETS=y +CONFIG_VSOCKETS_DIAG=y +CONFIG_VSOCKETS_LOOPBACK=y +CONFIG_VMWARE_VMCI_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS_COMMON=y +CONFIG_HYPERV_VSOCKETS=y +CONFIG_VMWARE_VMCI=y +CONFIG_VHOST_VSOCK=y +CONFIG_HYPERV=y +CONFIG_UEVENT_HELPER=n +CONFIG_VIRTIO=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_NET=y +CONFIG_NET_CORE=y +CONFIG_NETDEVICES=y +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_INET=y +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +CONFIG_9P_FS=y +CONFIG_VIRTIO_NET=y +CONFIG_CMDLINE_OVERRIDE=n +CONFIG_BINFMT_SCRIPT=y +CONFIG_SHMEM=y +CONFIG_TMPFS=y +CONFIG_UNIX=y +CONFIG_MODULE_SIG_FORCE=n +CONFIG_DEVTMPFS=y +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_UNIX98_PTYS=y +CONFIG_EARLY_PRINTK=y +CONFIG_INOTIFY_USER=y +CONFIG_BLOCK=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_SCSI=y +CONFIG_SCSI_VIRTIO=y +CONFIG_BLK_DEV_SD=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +CONFIG_I6300ESB_WDT=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_OVERLAY_FS=y +CONFIG_DAX=y +CONFIG_DAX_DRIVER=y +CONFIG_FS_DAX=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_ZONE_DEVICE=y +CONFIG_FUSE_FS=y +CONFIG_VIRTIO_FS=y +CONFIG_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS=y diff --git a/tools/testing/selftests/vsock/settings b/tools/testing/selftests/vsock/settings new file mode 100644 index 0000000000000000000000000000000000000000..694d70710ff08ac9fc91e9ecb5dbdadcf051f019 --- /dev/null +++ b/tools/testing/selftests/vsock/settings @@ -0,0 +1 @@ +timeout=300 diff --git a/tools/testing/selftests/vsock/vmtest.sh b/tools/testing/selftests/vsock/vmtest.sh new file mode 100755 index 0000000000000000000000000000000000000000..d083c444dd8e3a5893f7795ae5e5d90fdede6325 --- /dev/null +++ b/tools/testing/selftests/vsock/vmtest.sh @@ -0,0 +1,460 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2025 Meta Platforms, Inc. and affiliates +# +# Dependencies: +# * virtme-ng +# * busybox-static (used by virtme-ng) +# * qemu (used by virtme-ng) + +readonly SCRIPT_DIR="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)" +readonly KERNEL_CHECKOUT=$(realpath "${SCRIPT_DIR}"/../../../../) + +source "${SCRIPT_DIR}"/../kselftest/ktap_helpers.sh + +readonly VSOCK_TEST="${SCRIPT_DIR}"/vsock_test +readonly TEST_GUEST_PORT=51000 +readonly TEST_HOST_PORT=50000 +readonly TEST_HOST_PORT_LISTENER=50001 +readonly SSH_GUEST_PORT=22 +readonly SSH_HOST_PORT=2222 +readonly VSOCK_CID=1234 +readonly WAIT_PERIOD=3 +readonly WAIT_PERIOD_MAX=60 +readonly WAIT_TOTAL=$(( WAIT_PERIOD * WAIT_PERIOD_MAX )) +readonly QEMU_PIDFILE=$(mktemp /tmp/qemu_vsock_vmtest_XXXX.pid) + +# virtme-ng offers a netdev for ssh when using "--ssh", but we also need a +# control port forwarded for vsock_test. Because virtme-ng doesn't support +# adding an additional port to forward to the device created from "--ssh" and +# virtme-init mistakenly sets identical IPs to the ssh device and additional +# devices, we instead opt out of using --ssh, add the device manually, and also +# add the kernel cmdline options that virtme-init uses to setup the interface. +readonly QEMU_TEST_PORT_FWD="hostfwd=tcp::${TEST_HOST_PORT}-:${TEST_GUEST_PORT}" +readonly QEMU_SSH_PORT_FWD="hostfwd=tcp::${SSH_HOST_PORT}-:${SSH_GUEST_PORT}" +readonly QEMU_OPTS="\ + -netdev user,id=n0,${QEMU_TEST_PORT_FWD},${QEMU_SSH_PORT_FWD} \ + -device virtio-net-pci,netdev=n0 \ + -device vhost-vsock-pci,guest-cid=${VSOCK_CID} \ + --pidfile ${QEMU_PIDFILE} \ +" +readonly KERNEL_CMDLINE="virtme.dhcp net.ifnames=0 biosdevname=0 virtme.ssh virtme_ssh_user=$USER" +readonly LOG=$(mktemp /tmp/vsock_vmtest_XXXX.log) +readonly TEST_NAMES=(vm_server_host_client vm_client_host_server vm_loopback) +readonly TEST_DESCS=( + "Run vsock_test in server mode on the VM and in client mode on the host." + "Run vsock_test in client mode on the VM and in server mode on the host." + "Run vsock_test using the loopback transport in the VM." +) + +VERBOSE=0 + +usage() { + local name + local desc + local i + + echo + echo "$0 [OPTIONS] [TEST]..." + echo "If no TEST argument is given, all tests will be run." + echo + echo "Options" + echo " -b: build the kernel from the current source tree and use it for guest VMs" + echo " -q: set the path to or name of qemu binary" + echo " -v: verbose output" + echo + echo "Available tests" + + for ((i = 0; i < ${#TEST_NAMES[@]}; i++)); do + name=${TEST_NAMES[${i}]} + desc=${TEST_DESCS[${i}]} + printf "\t%-35s%-35s\n" "${name}" "${desc}" + done + echo + + exit 1 +} + +die() { + echo "$*" >&2 + exit "${KSFT_FAIL}" +} + +vm_ssh() { + ssh -q -o UserKnownHostsFile=/dev/null -p ${SSH_HOST_PORT} localhost "$@" + return $? +} + +cleanup() { + if [[ -s "${QEMU_PIDFILE}" ]]; then + pkill -SIGTERM -F "${QEMU_PIDFILE}" > /dev/null 2>&1 + fi + + # If failure occurred during or before qemu start up, then we need + # to clean this up ourselves. + if [[ -e "${QEMU_PIDFILE}" ]]; then + rm "${QEMU_PIDFILE}" + fi +} + +check_args() { + local found + + for arg in "$@"; do + found=0 + for name in "${TEST_NAMES[@]}"; do + if [[ "${name}" = "${arg}" ]]; then + found=1 + break + fi + done + + if [[ "${found}" -eq 0 ]]; then + echo "${arg} is not an available test" >&2 + usage + fi + done + + for arg in "$@"; do + if ! command -v > /dev/null "test_${arg}"; then + echo "Test ${arg} not found" >&2 + usage + fi + done +} + +check_deps() { + for dep in vng ${QEMU} busybox pkill ssh; do + if [[ ! -x $(command -v "${dep}") ]]; then + echo -e "skip: dependency ${dep} not found!\n" + exit "${KSFT_SKIP}" + fi + done + + if [[ ! -x $(command -v "${VSOCK_TEST}") ]]; then + printf "skip: %s not found!" "${VSOCK_TEST}" + printf " Please build the kselftest vsock target.\n" + exit "${KSFT_SKIP}" + fi +} + +handle_build() { + if [[ ! "${BUILD}" -eq 1 ]]; then + return + fi + + if [[ ! -d "${KERNEL_CHECKOUT}" ]]; then + echo "-b requires vmtest.sh called from the kernel source tree" >&2 + exit 1 + fi + + pushd "${KERNEL_CHECKOUT}" &>/dev/null + + if ! vng --kconfig --config "${SCRIPT_DIR}"/config; then + die "failed to generate .config for kernel source tree (${KERNEL_CHECKOUT})" + fi + + if ! make -j$(nproc); then + die "failed to build kernel from source tree (${KERNEL_CHECKOUT})" + fi + + popd &>/dev/null +} + +vm_start() { + local logfile=/dev/null + local verbose_opt="" + local kernel_opt="" + local qemu + + qemu=$(command -v "${QEMU}") + + if [[ "${VERBOSE}" -eq 1 ]]; then + verbose_opt="--verbose" + logfile=/dev/stdout + fi + + if [[ "${BUILD}" -eq 1 ]]; then + kernel_opt="${KERNEL_CHECKOUT}" + fi + + vng \ + --run \ + ${kernel_opt} \ + ${verbose_opt} \ + --qemu-opts="${QEMU_OPTS}" \ + --qemu="${qemu}" \ + --user root \ + --append "${KERNEL_CMDLINE}" \ + --rw &> ${logfile} & + + if ! timeout ${WAIT_TOTAL} \ + bash -c 'while [[ ! -s '"${QEMU_PIDFILE}"' ]]; do sleep 1; done; exit 0'; then + die "failed to boot VM" + fi +} + +vm_wait_for_ssh() { + local i + + i=0 + while true; do + if [[ ${i} -gt ${WAIT_PERIOD_MAX} ]]; then + die "Timed out waiting for guest ssh" + fi + if vm_ssh -- true; then + break + fi + i=$(( i + 1 )) + sleep ${WAIT_PERIOD} + done +} + +# derived from selftests/net/net_helper.sh +wait_for_listener() +{ + local port=$1 + local interval=$2 + local max_intervals=$3 + local protocol=tcp + local pattern + local i + + pattern=":$(printf "%04X" "${port}") " + + # for tcp protocol additionally check the socket state + [ "${protocol}" = "tcp" ] && pattern="${pattern}0A" + for i in $(seq "${max_intervals}"); do + if awk '{print $2" "$4}' /proc/net/"${protocol}"* | \ + grep -q "${pattern}"; then + break + fi + sleep "${interval}" + done +} + +vm_wait_for_listener() { + local port=$1 + + vm_ssh <<EOF +$(declare -f wait_for_listener) +wait_for_listener ${port} ${WAIT_PERIOD} ${WAIT_PERIOD_MAX} +EOF +} + +host_wait_for_listener() { + wait_for_listener "${TEST_HOST_PORT_LISTENER}" "${WAIT_PERIOD}" "${WAIT_PERIOD_MAX}" +} + +__log_stdin() { + cat | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }' +} + +__log_args() { + echo "$*" | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }' +} + +log() { + local prefix="$1" + + shift + local redirect= + if [[ ${VERBOSE} -eq 0 ]]; then + redirect=/dev/null + else + redirect=/dev/stdout + fi + + if [[ "$#" -eq 0 ]]; then + __log_stdin | tee -a "${LOG}" > ${redirect} + else + __log_args "$@" | tee -a "${LOG}" > ${redirect} + fi +} + +log_setup() { + log "setup" "$@" +} + +log_host() { + local testname=$1 + + shift + log "test:${testname}:host" "$@" +} + +log_guest() { + local testname=$1 + + shift + log "test:${testname}:guest" "$@" +} + +test_vm_server_host_client() { + local testname="${FUNCNAME[0]#test_}" + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=server \ + --control-port="${TEST_GUEST_PORT}" \ + --peer-cid=2 \ + 2>&1 | log_guest "${testname}" & + + vm_wait_for_listener "${TEST_GUEST_PORT}" + + ${VSOCK_TEST} \ + --mode=client \ + --control-host=127.0.0.1 \ + --peer-cid="${VSOCK_CID}" \ + --control-port="${TEST_HOST_PORT}" 2>&1 | log_host "${testname}" + + return $? +} + +test_vm_client_host_server() { + local testname="${FUNCNAME[0]#test_}" + + ${VSOCK_TEST} \ + --mode "server" \ + --control-port "${TEST_HOST_PORT_LISTENER}" \ + --peer-cid "${VSOCK_CID}" 2>&1 | log_host "${testname}" & + + host_wait_for_listener + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=client \ + --control-host=10.0.2.2 \ + --peer-cid=2 \ + --control-port="${TEST_HOST_PORT_LISTENER}" 2>&1 | log_guest "${testname}" + + return $? +} + +test_vm_loopback() { + local testname="${FUNCNAME[0]#test_}" + local port=60000 # non-forwarded local port + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=server \ + --control-port="${port}" \ + --peer-cid=1 2>&1 | log_guest "${testname}" & + + vm_wait_for_listener "${port}" + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=client \ + --control-host="127.0.0.1" \ + --control-port="${port}" \ + --peer-cid=1 2>&1 | log_guest "${testname}" + + return $? +} + +run_test() { + local host_oops_cnt_before + local host_warn_cnt_before + local vm_oops_cnt_before + local vm_warn_cnt_before + local host_oops_cnt_after + local host_warn_cnt_after + local vm_oops_cnt_after + local vm_warn_cnt_after + local name + local rc + + host_oops_cnt_before=$(dmesg | grep -c -i 'Oops') + host_warn_cnt_before=$(dmesg --level=warn | wc -l) + vm_oops_cnt_before=$(vm_ssh -- dmesg | grep -c -i 'Oops') + vm_warn_cnt_before=$(vm_ssh -- dmesg --level=warn | wc -l) + + name=$(echo "${1}" | awk '{ print $1 }') + eval test_"${name}" + rc=$? + + host_oops_cnt_after=$(dmesg | grep -i 'Oops' | wc -l) + if [[ ${host_oops_cnt_after} -gt ${host_oops_cnt_before} ]]; then + echo "FAIL: kernel oops detected on host" | log_host "${name}" + rc=$KSFT_FAIL + fi + + host_warn_cnt_after=$(dmesg --level=warn | wc -l) + if [[ ${host_warn_cnt_after} -gt ${host_warn_cnt_before} ]]; then + echo "FAIL: kernel warning detected on host" | log_host "${name}" + rc=$KSFT_FAIL + fi + + vm_oops_cnt_after=$(vm_ssh -- dmesg | grep -i 'Oops' | wc -l) + if [[ ${vm_oops_cnt_after} -gt ${vm_oops_cnt_before} ]]; then + echo "FAIL: kernel oops detected on vm" | log_host "${name}" + rc=$KSFT_FAIL + fi + + vm_warn_cnt_after=$(vm_ssh -- dmesg --level=warn | wc -l) + if [[ ${vm_warn_cnt_after} -gt ${vm_warn_cnt_before} ]]; then + echo "FAIL: kernel warning detected on vm" | log_host "${name}" + rc=$KSFT_FAIL + fi + + return "${rc}" +} + +QEMU="qemu-system-$(uname -m)" + +while getopts :hvsq:b o +do + case $o in + v) VERBOSE=1;; + b) BUILD=1;; + q) QEMU=$OPTARG;; + h|*) usage;; + esac +done +shift $((OPTIND-1)) + +trap cleanup EXIT + +if [[ ${#} -eq 0 ]]; then + ARGS=("${TEST_NAMES[@]}") +else + ARGS=("$@") +fi + +check_args "${ARGS[@]}" +check_deps +handle_build + +echo "1..${#ARGS[@]}" + +log_setup "Booting up VM" +vm_start +vm_wait_for_ssh +log_setup "VM booted up" + +cnt_pass=0 +cnt_fail=0 +cnt_skip=0 +cnt_total=0 +for arg in "${ARGS[@]}"; do + run_test "${arg}" + rc=$? + if [[ ${rc} -eq $KSFT_PASS ]]; then + cnt_pass=$(( cnt_pass + 1 )) + echo "ok ${cnt_total} ${arg}" + elif [[ ${rc} -eq $KSFT_SKIP ]]; then + cnt_skip=$(( cnt_skip + 1 )) + echo "ok ${cnt_total} ${arg} # SKIP" + elif [[ ${rc} -eq $KSFT_FAIL ]]; then + cnt_fail=$(( cnt_fail + 1 )) + echo "not ok ${cnt_total} ${arg} # exit=$rc" + fi + cnt_total=$(( cnt_total + 1 )) +done + +echo "SUMMARY: PASS=${cnt_pass} SKIP=${cnt_skip} FAIL=${cnt_fail}" +echo "Log: ${LOG}" + +if [ $((cnt_pass + cnt_skip)) -eq ${cnt_total} ]; then + exit "$KSFT_PASS" +else + exit "$KSFT_FAIL" +fi --- base-commit: 8066e388be48f1ad62b0449dc1d31a25489fa12a change-id: 20250325-vsock-vmtest-b3a21d2102c2 Best regards, -- Bobby Eshleman <bobbyeshleman(a)gmail.com>

4 months, 3 weeks

2
4
0 0

[PATCH net-next V10 0/6] Support rate management on traffic classes in devlink and mlx5

by Tariq Toukan

Hi, This patch series by Carolina is V10 of the feature that adds rate management support on traffic classes in devlink and mlx5, see full description by Carolina below [0]. V10: - Added netdevsim selftest for tc-bw ops. - Dropped header: field as it’s unnecessary for local constants in devlink.yaml. Regards, Tariq [0] This patch series extends the devlink-rate API to support traffic class (TC) bandwidth management, enabling more granular control over traffic shaping and rate limiting across multiple TCs. The API now allows users to specify bandwidth proportions for different traffic classes in a single command. This is particularly useful for managing Enhanced Transmission Selection (ETS) for groups of Virtual Functions (VFs), allowing precise bandwidth allocation across traffic classes. Additionally the series refines the QoS handling in net/mlx5 to support TC arbitration and bandwidth management on vports and rate nodes. Discussions on traffic class shaping in net-shapers began in V5 [1], where we discussed with maintainers whether net-shapers should support traffic classes and how this could be implemented. Later, after further conversations with Paolo Abeni and Simon Horman, Cosmin provided an update [2], confirming that net-shapers' tree-based hierarchy aligns well with traffic classes when treated as distinct subsets of netdev queues. Since mlx5 enforces a 1:1 mapping between TX queues and traffic classes, this approach seems feasible, though some open questions remain regarding queue reconfiguration and certain mlx5 scheduling behaviors. Building on that discussion, Cosmin has now shared a concrete implementation plan on the netdev mailing list [3]. The plan, developed in collaboration with Paolo and Simon, outlines how net-shapers can be extended to support the same use cases currently covered by devlink-rate, with the eventual goal of aligning both and simplifying the shaping infrastructure in the kernel. This work was presented at Netdev 0x19 in Zagreb [4]. There we presented how TC scheduling is enforced in mlx5 hardware, which led to discussions on the mailing list. A summary of how things work: Classification means labeling a packet with a traffic class based on the packet's DSCP or VLAN PCP field, then treating packets with different traffic classes differently during transmit processing. In a virtualized setup, VFs are untrusted and do not control classification or shaping. Classification is done by the hardware using a prio-to-TC mapping set by the hypervisor. VFs only select which send queue to use and are expected to respect the classification logic by sending each traffic class on its dedicated queue. As stated in the net-shapers plan [3], each transmit queue should carry only a single traffic class. Mixing classes in a single queue can lead to HOL blocking. In the mlx5 implementation, if the queue used does not match the classified traffic class, the hardware moves the queue to the correct TC scheduler. This movement is not a reclassification; it’s a necessary enforcement step to ensure traffic class isolation is maintained. Extend devlink-rate API to support rate management on TCs: - devlink: Extend the devlink rate API to support traffic class bandwidth management Introduce a no-op implementation: - net/mlx5: Add no-op implementation for setting tc-bw on rate objects Add support for enabling and disabling TC QoS on vports and nodes: - net/mlx5: Add support for setting tc-bw on nodes - net/mlx5: Add traffic class scheduling support for vport QoS Support for setting tc-bw on rate objects: - net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw [1] https://lore.kernel.org/netdev/20241204220931.254964-1-tariqt@nvidia.com/ [2] https://lore.kernel.org/netdev/67df1a562614b553dcab043f347a0d7c5393ff83.cam… [3] https://lore.kernel.org/netdev/d9831d0c940a7b77419abe7c7330e822bbfd1cfb.cam… [4] https://netdevconf.info/0x19/sessions/talk/optimizing-bandwidth-allocation-… Carolina Jubran (6): devlink: Extend devlink rate API with traffic classes bandwidth management selftest: netdevsim: Add devlink rate tc-bw test net/mlx5: Add no-op implementation for setting tc-bw on rate objects net/mlx5: Add support for setting tc-bw on nodes net/mlx5: Add traffic class scheduling support for vport QoS net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw Documentation/netlink/specs/devlink.yaml | 35 +- .../networking/devlink/devlink-port.rst | 7 + .../net/ethernet/mellanox/mlx5/core/devlink.c | 2 + .../net/ethernet/mellanox/mlx5/core/esw/qos.c | 1007 ++++++++++++++++- .../net/ethernet/mellanox/mlx5/core/esw/qos.h | 8 + .../net/ethernet/mellanox/mlx5/core/eswitch.h | 14 +- drivers/net/netdevsim/dev.c | 43 + drivers/net/netdevsim/netdevsim.h | 1 + include/net/devlink.h | 6 + include/uapi/linux/devlink.h | 9 + net/devlink/netlink_gen.c | 15 +- net/devlink/netlink_gen.h | 1 + net/devlink/rate.c | 127 +++ .../drivers/net/netdevsim/devlink.sh | 51 + 14 files changed, 1289 insertions(+), 37 deletions(-) base-commit: f685204c57e87d2a88b159c7525426d70ee745c9 -- 2.31.1

4 months, 3 weeks

5
15
0 0

[PATCH] rust: kunit: use crate-level mapping for `c_void`

by Jesung Yang

Use `kernel::ffi::c_void` instead of `core::ffi::c_void` for consistency and to centralize abstraction. Since `kernel::ffi::c_void` is a transparent wrapper around `core::ffi::c_void`, both are functionally equivalent. However, using `kernel::ffi::c_void` improves consistency across the kernel's Rust code and provides a unified reference point in case the definition ever needs to change, even if such a change is unlikely. Signed-off-by: Jesung Yang <y.j3ms.n(a)gmail.com> --- rust/kernel/kunit.rs | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/rust/kernel/kunit.rs b/rust/kernel/kunit.rs index 81833a687b75..bd6fc712dd79 100644 --- a/rust/kernel/kunit.rs +++ b/rust/kernel/kunit.rs @@ -6,7 +6,8 @@ //! //! Reference: <https://docs.kernel.org/dev-tools/kunit/index.html> -use core::{ffi::c_void, fmt}; +use core::fmt; +use kernel::ffi::c_void; /// Prints a KUnit error-level message. /// -- 2.39.5

4 months, 3 weeks

3
5
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror May 2025