July 2025 - Linux-kselftest-mirror

[RFC Patch 0/2] selftests/mm: assert rmap behave as expected

by Wei Yang

As David suggested, currently we don't have a high level test case to verify the behavior of rmap. This patch set introduce the verification on rmap by migration. Patch 1 is a preparation to move ksm related operation into vm_util. Patch 2 is the new test case. Currently it covers following four scenarios: * anonymous page * shmem page * pagecache page * ksm page Wei Yang (2): selftests/mm: put general ksm operation into vm_util selftests/mm: assert rmap behave as expected MAINTAINERS | 1 + tools/testing/selftests/mm/.gitignore | 1 + tools/testing/selftests/mm/Makefile | 3 + .../selftests/mm/ksm_functional_tests.c | 76 +-- tools/testing/selftests/mm/rmap.c | 466 ++++++++++++++++++ tools/testing/selftests/mm/run_vmtests.sh | 4 + tools/testing/selftests/mm/vm_util.c | 71 +++ tools/testing/selftests/mm/vm_util.h | 7 + 8 files changed, 563 insertions(+), 66 deletions(-) create mode 100644 tools/testing/selftests/mm/rmap.c -- 2.34.1

1 month, 4 weeks

2
8
0 0

[PATCH 0/2] selftests/fchmodat2: Error handling and general cleanups

by Mark Brown

I looked at the fchmodat2() tests since I've been experiencing some random intermittent segfaults with them in my test systems, while doing so I noticed these two issues. Unfortunately I didn't figure out the original yet, unless I managed to fix it unwittingly. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Mark Brown (2): selftests/fchmodat2: Clean up temporary files and directories selftests/fchmodat2: Use ksft_finished() tools/testing/selftests/fchmodat2/fchmodat2_test.c | 166 ++++++++++++++------- 1 file changed, 112 insertions(+), 54 deletions(-) --- base-commit: d7b8f8e20813f0179d8ef519541a3527e7661d3a change-id: 20250711-selftests-fchmodat2-c30374c376f8 Best regards, -- Mark Brown <broonie(a)kernel.org>

1 month, 4 weeks

1
2
0 0

[PATCH v2 0/4] signal handling support for nolibc

by Benjamin Berg

From: Benjamin Berg <benjamin.berg(a)intel.com> Hi, This patchset adds signal handling to nolibc. Initially, I would like to use this for tests. But in the long run, the goal is to use nolibc for the UML kernel itself. In both cases, signal handling will be needed. v2 contains some bugfixes and has a better test coverage. Also addressed are various review comments. Benjamin Benjamin Berg (4): selftests/nolibc: fix EXPECT_NZ macro selftests/nolibc: validate order of constructor calls tools/nolibc: add more generic bitmask macros for FD_* tools/nolibc: add signal support tools/include/nolibc/arch-arm.h | 7 + tools/include/nolibc/arch-arm64.h | 3 + tools/include/nolibc/arch-loongarch.h | 3 + tools/include/nolibc/arch-m68k.h | 10 ++ tools/include/nolibc/arch-mips.h | 3 + tools/include/nolibc/arch-powerpc.h | 8 + tools/include/nolibc/arch-riscv.h | 3 + tools/include/nolibc/arch-s390.h | 8 +- tools/include/nolibc/arch-sh.h | 5 + tools/include/nolibc/arch-sparc.h | 47 ++++++ tools/include/nolibc/arch-x86.h | 13 ++ tools/include/nolibc/signal.h | 103 ++++++++++++ tools/include/nolibc/sys.h | 2 +- tools/include/nolibc/time.h | 3 +- tools/include/nolibc/types.h | 81 ++++++---- .../selftests/nolibc/nolibc-test-linkage.c | 17 +- tools/testing/selftests/nolibc/nolibc-test.c | 150 +++++++++++++++++- 17 files changed, 422 insertions(+), 44 deletions(-) -- 2.50.0

1 month, 4 weeks

3
12
0 0

[PATCH net-next v6 0/3] selftest: net: Add selftest for netpoll

by Breno Leitao

I am submitting a new selftest for the netpoll subsystem specifically targeting the case where the RX is polling in the TX path, which is a case that we don't have any test in the tree today. This is done when netpoll_poll_dev() called, and this test creates a scenario when that is probably. The test does the following: 1) Configuring a single RX/TX queue to increase contention on the interface. 2) Generating background traffic to saturate the network, mimicking real-world congestion. 3) Sending netconsole messages to trigger netpoll polling and monitor its behavior. 4) Using dynamic netconsole targets via configfs, with the ability to delete and recreate targets during the test. 5) Running bpftrace in parallel to verify that netpoll_poll_dev() is called when expected. If it is called, then the test passes, otherwise the test is marked as skipped. In order to achieve it, I stole Jakub's bpftrace helper from [1], and did some small changes that I found useful to use the helper. So, this patchset basically contains: 1) The code stolen from Jakub 2) Improvements on bpftrace() helper 3) The selftest itself Link: https://lore.kernel.org/all/20250421222827.283737-22-kuba@kernel.org/ [1] --- Changes in v6: - Remove the network toggled (Jakub) - Set ringsize and queue size (Jakub) - Some other general improvements (Jakub) - Link to v5: https://lore.kernel.org/r/20250709-netpoll_test-v5-0-b3737895affe@debian.org Changes in v5: - Rebased on top of net-next. - Calling bpftrace_stop using the defer helper. (Willem) - Link to v4: https://lore.kernel.org/r/20250702-netpoll_test-v4-0-cec227e85639@debian.org Changes in v4: - Make the test XFail if it doesn't hit the function we are looking for - Toggle the interface while the traffic is flowing. - Bumped the number of messages from 10 to 40 per iterations. * This is hitting ~15 times per run on my vng test. - Decreased the time from 15 seconds to 10 seconds, given that if it didn't hit the function in 10 seconds, 5 seconds extra will not help. - Link to v3: https://lore.kernel.org/r/20250627-netpoll_test-v3-0-575bd200c8a9@debian.org Changes in v3: - Make pylint happy (Simon) - Remove the unnecessary patch in bpftrace to raise an exception when it fails. (Jakub) - Improved the bpftrace code (Willem) - Stop sending messages if bpftrace is not alive anymore. - Link to v2: https://lore.kernel.org/r/20250625-netpoll_test-v2-0-47d27775222c@debian.org Changes in v2: - Stole Jakub's helper to run bpftrace - Removed the DEBUG option and moved logs to logging - Change the code to have a higher chance of calling netpoll_poll_dev(). In my current configuration, it is hitting multiple times during the test. - Save and restore TX/RX queue size (Jakub) - Link to v1: https://lore.kernel.org/r/20250620-netpoll_test-v1-1-5068832f72fc@debian.org --- Breno Leitao (2): selftests: drv-net: Strip '@' prefix from bpftrace map keys selftests: net: add netpoll basic functionality test Jakub Kicinski (1): selftests: drv-net: add helper/wrapper for bpftrace tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/py/__init__.py | 3 +- .../testing/selftests/drivers/net/netpoll_basic.py | 411 +++++++++++++++++++++ tools/testing/selftests/net/lib/py/utils.py | 35 ++ 4 files changed, 449 insertions(+), 1 deletion(-) --- base-commit: 0f26870a989bf69957ed69d10c7ffc57ca5a7f52 change-id: 20250612-netpoll_test-a1324d2057c8 Best regards, -- Breno Leitao <leitao(a)debian.org>

1 month, 4 weeks

2
5
0 0

[PATCH v22 net-next 0/6] DUALPI2 patch

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find the DualPI2 patch v22. This patch serise adds DualPI Improved with a Square (DualPI2) with following features: * Supports congestion controls that comply with the Prague requirements in RFC9331 (e.g. TCP-Prague) * Coupled dual-queue that separates the L4S traffic in a low latency queue (L-queue), without harming remaining traffic that is scheduled in classic queue (C-queue) due to congestion-coupling using PI2 as defined in RFC9332 * Configurable overload strategies * Use of sojourn time to reliably estimate queue delay * Supports ECN L4S-identifier (IP.ECN==0b*1) to classify traffic into respective queues For more details of DualPI2, please refer IETF RFC9332 (https://datatracker.ietf.org/doc/html/rfc9332). Best regards, Chia-Yu --- v22 (11-Jul-2025) - Fix the issue when user provides an empty TCA_OPTIONS with no nested attributes (Paolo Abeni <pabeni(a)redhat.com>, Jakub Kicinski <kuba(a)kernel.org>) v21 (02-Jul-2025) - Replace STEP_THRESH and STEP_PACKETS with STEP_THRESH_PKTS and STEP_THRESH_US (Jakub Kicinski <kuba(a)kernel.org>) - Move READ_ONCE and WRITE_ONCE to later DualPI2 patches (Jakub Kicinski <kuba(a)kernel.org>) - Replace NLA_POLICY_FULL_RANGE with NLA_POLICY_RANGE (Jakub Kicinski <kuba(a)kernel.org>) - Set extra error message for dualpi2_change (Jakub Kicinski <kuba(a)kernel.org>) - Drop redundant else for better readability (Paolo Abeni <pabeni(a)redhat.com>) - Replace step-thresh and step-packets with step-thresh-pkts and step-thresh-us (Jakub Kicinski <kuba(a)kernel.org>) - Remove redundant name-prefix and simplify entries of dualpi2 enums (Jakub Kicinski <kuba(a)kernel.org>) - Fix some typos and format issues of dualpi2 attributes v20 (21-Jun-2025) - Add one more commit to fix warning and style check on tdc.sh reported by shellcheck - Remove double-prefixed of "tc_tc_dualpi2_attrs" in tc-user.h (Donald Hunter <donald.hunter(a)gmail.com>) v19 (14-Jun-2025) - Fix one typo in the comment of #1 (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) - Update commit message of #4 (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) - Wrap long lines of Documentation/netlink/specs/tc.yaml to within 80 characters (Jakub Kicinski <kuba(a)kernel.org>) v18 (13-Jun-2025) - Add the num of enum used by DualPI2 and fix name and name-prefix of DualPI2 enum and attribute - Replace from_timer() with timer_container_of() (Pedro Tammela <pctammela(a)mojatatu.com>) v17 (25-May-2025, Resent at 11-Jun-2025) - Replace 0xffffffff with U32_MAX (Paolo Abeni <pabeni(a)redhat.com>) - Use helper function qdisc_dequeue_internal() and add new helper function skb_apply_step() (Paolo Abeni <pabeni(a)redhat.com>) - Add s64 casting when calculating the delta of the PI controller (Paolo Abeni <pabeni(a)redhat.com>) - Change the drop reason into SKB_DROP_REASON_QDISC_CONGESTED for drop_early (Paolo Abeni <pabeni(a)redhat.com>) - Modify the condition to remove the original skb when enqueuing multiple GSO segments (Paolo Abeni <pabeni(a)redhat.com>) - Add READ_ONCE() in dualpi2_dump_stat() (Paolo Abeni <pabeni(a)redhat.com>) - Add comments, brackets, and brackets for readability (Paolo Abeni <pabeni(a)redhat.com>) v16 (16-MAy-2025) - Add qdisc_lock() to dualpi2_timer() in dualpi2_timer (Paolo Abeni <pabeni(a)redhat.com>) - Introduce convert_ns_to_usec() to convert usec to nsec without overflow in #1 (Paolo Abeni <pabeni(a)redhat.com>) - Update convert_us_tonsec() to convert nsec to usec without overflow in #2 (Paolo Abeni <pabeni(a)redhat.com>) - Add more descriptions with respect to DualPI2 in the cover ltter and add changelog in each patch (Paolo Abeni <pabeni(a)redhat.com>) v15 (09-May-2025) - Add enum of TCA_DUALPI2_ECN_MASK_CLA_ECT to remove potential leakeage in #1 (Simon Horman <horms(a)kernel.org>) - Fix one typo in comment of #2 - Update tc.yaml in #5 to aligh with the updated enum of pkt_sched.h v14 (05-May-2025) - Modify tc.yaml: (1) Replace flags with enum and remove enum-as-flags, (2) Remove credit-queue in xstats, and (3) Change attribute types (Donald Hunter <donald.hun - Add enum and fix the ordering of variables in pkt_sched.h to align with the modified tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Add validators for DROP_OVERLOAD, DROP_EARLY, ECN_MASK, and SPLIT_GSO in sch_dualpi2.c (Donald Hunter <donald.hunter(a)gmail.com>) - Update dualpi2.json to align with the updated variable order in pkt_sched.h - Reorder patches (Donald Hunter <donald.hunter(a)gmail.com>) v13 (26-Apr-2025) - Use dashes in member names to follow YNL conventions in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Define enumerations separately for flags of drop-early, drop-overload, ecn-mask, credit-queue in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Change the types of split-gso and step-packets into flag in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Revert to u32/u8 types for tc-dualpi2-xstats members in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Add new test cases in tc-tests/qdiscs/dualpi2.json to cover all dualpi2 parameters (Donald Hunter <donald.hunter(a)gmail.com>) - Change the type of TCA_DUALPI2_STEP_PACKETS into NLA_FLAG (Donald Hunter <donald.hunter(a)gmail.com>) v12 (22-Apr-2025) - Remove anonymous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Replace u32/u8 with uint and s32 with int in tc spec document (Paolo Abeni <pabeni(a)redhat.com>) - Introduce get_memory_limit function to handle potential overflow when multipling limit with MTU (Paolo Abeni <pabeni(a)redhat.com>) - Double the packet length to further include packet overhead in memory_limit (Paolo Abeni <pabeni(a)redhat.com>) - Remove the check of qdisc_qlen(sch) when calling qdisc_tree_reduce_backlog (Paolo Abeni <pabeni(a)redhat.com>) v11 (15-Apr-2025) - Replace hstimer_init with hstimer_setup in sch_dualpi2.c v10 (25-Mar-2025) - Remove leftover include in include/linux/netdevice.h and anonymous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Use kfree_skb_reason() and add SKB_DROP_REASON_DUALPI2_STEP_DROP drop reason (Paolo Abeni <pabeni(a)redhat.com>) - Split sch_dualpi2.c into 3 patches (and overall 5 patches): Struct definition & parsing, Dump stats & configuration, Enqueue/Dequeue (Paolo Abeni <pabeni(a)redhat.com>) v9 (16-Mar-2025) - Fix mem_usage error in previous version - Add min_qlen_step to the dualpi2 attribute as the minimum queue length in number of packets in the L-queue to start step threshold marking. In previous versions, this value was fixed to 2, so the step threshold was applied to mark packets in the L queue only when the queue length of the L queue was greater than or equal to 2 packets. This will cause larger queuing delays for L4S traffic at low rates (<20Mbps). So we parameterize it and change the default value to 0. Comparison of tcp_1down run 'HTB 20Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 11.55 11.70 ms 350 TCP upload avg : 18.96 N/A Mbits/s 350 TCP upload sum : 18.96 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 10.81 10.70 ms 350 TCP upload avg : 18.91 N/A Mbits/s 350 TCP upload sum : 18.91 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 12.61 12.80 ms 350 TCP upload avg : 9.48 N/A Mbits/s 350 TCP upload sum : 9.48 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.06 10.80 ms 350 TCP upload avg : 9.43 N/A Mbits/s 350 TCP upload sum : 9.43 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 40.86 37.45 ms 350 TCP upload avg : 0.88 N/A Mbits/s 350 TCP upload sum : 0.88 N/A Mbits/s 350 TCP upload::1 : 0.88 0.97 Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.07 10.40 ms 350 TCP upload avg : 0.55 N/A Mbits/s 350 TCP upload sum : 0.55 N/A Mbits/s 350 TCP upload::1 : 0.55 0.59 Mbits/s 350 v8 (11-Mar-2025) - Fix warning messages in v7 v7 (07-Mar-2025) - Separate into 3 patches to avoid mixing changes of documentation, selftest, and code. (Cong Wang <xiyou.wangcong(a)gmail.com>) v6 (04-Mar-2025) - Add modprobe for dulapi2 in tc-testing script tc-testing/tdc.sh (Jakub Kicinski <kuba(a)kernel.org>) - Update test cases in dualpi2.json - Update commit message v5 (22-Feb-2025) - A comparison was done between MQ + DUALPI2, MQ + FQ_PIE, MQ + FQ_CODEL: Unshaped 1gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 - Summary of tcp_4down run 'MQ + FQ_PIE' avg median # data pts Ping (ms) ICMP : 1.21 1.37 ms 350 TCP download avg : 235.42 N/A Mbits/s 350 TCP download sum : 941.61 N/A Mbits/s 350 TCP download::1 : 232.54 233.13 Mbits/s 350 TCP download::2 : 232.52 232.80 Mbits/s 350 TCP download::3 : 233.14 233.78 Mbits/s 350 TCP download::4 : 243.41 241.48 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2' avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 Unshaped 1gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 Unshaped 10gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 0.22 0.23 ms 350 TCP download avg : 2354.08 N/A Mbits/s 350 TCP download sum : 9416.31 N/A Mbits/s 350 TCP download::1 : 2353.65 2352.81 Mbits/s 350 TCP download::2 : 2354.54 2354.21 Mbits/s 350 TCP download::3 : 2353.56 2353.78 Mbits/s 350 TCP download::4 : 2354.56 2354.45 Mbits/s 350 - Summary of tcp_4down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 0.20 0.19 ms 350 TCP download avg : 2354.76 N/A Mbits/s 350 TCP download sum : 9419.04 N/A Mbits/s 350 TCP download::1 : 2354.77 2353.89 Mbits/s 350 TCP download::2 : 2353.41 2354.29 Mbits/s 350 TCP download::3 : 2356.18 2354.19 Mbits/s 350 TCP download::4 : 2354.68 2353.15 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 0.24 0.24 ms 350 TCP download avg : 2354.11 N/A Mbits/s 350 TCP download sum : 9416.43 N/A Mbits/s 350 TCP download::1 : 2354.75 2353.93 Mbits/s 350 TCP download::2 : 2353.15 2353.75 Mbits/s 350 TCP download::3 : 2353.49 2353.72 Mbits/s 350 TCP download::4 : 2355.04 2353.73 Mbits/s 350 Unshaped 10gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 7.57 8.69 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9467.82 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 7.82 8.91 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9468.42 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 6.87 7.93 ms 350 TCP download avg : 73.95 N/A Mbits/s 350 TCP download sum : 9465.87 N/A Mbits/s 350 From the results shown above, we see small differences between combinations. - Update commit message to include results of no_split_gso and split_gso (Dave Taht <dave.taht(a)gmail.com> and Paolo Abeni <pabeni(a)redhat.com>) - Add memlimit in the dualpi2 attribute, and add memory_used, max_memory_used, memory_limit in dualpi2 stats (Dave Taht <dave.taht(a)gmail.com>) - Update note in sch_dualpi2.c related to BBRv3 status (Dave Taht <dave.taht(a)gmail.com>) - Update license identifier (Dave Taht <dave.taht(a)gmail.com>) - Add selftest in tools/testing/selftests/tc-testing (Cong Wang <xiyou.wangcong(a)gmail.com>) - Use netlink policies for parameter checks (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Modify texts & fix typos in Documentation/netlink/specs/tc.yaml (Dave Taht <dave.taht(a)gmail.com>) - Add descriptions of packet counter statistics and the reset function of sch_dualpi2.c - Fix step_thresh in packets - Update code comments in sch_dualpi2.c v4 (22-Oct-2024) - Update statement in Kconfig for DualPI2 (Stephen Hemminger <stephen(a)networkplumber.org>) - Put a blank line after #define in sch_dualpi2.c (Stephen Hemminger <stephen(a)networkplumber.org>) - Fix line length warning. v3 (19-Oct-2024) - Fix compilaiton error - Update Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Oct-2024) - Add Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) - Use dualpi2 instead of skb prefix (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Replace nla_parse_nested_deprecated with nla_parse_nested (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Fix line length warning --- Chia-Yu Chang (5): sched: Struct definition and parsing of dualpi2 qdisc sched: Dump configuration and statistics of dualpi2 qdisc selftests/tc-testing: Fix warning and style check on tdc.sh selftests/tc-testing: Add selftests for qdisc DualPI2 Documentation: netlink: specs: tc: Add DualPI2 specification Koen De Schepper (1): sched: Add enqueue/dequeue of dualpi2 qdisc Documentation/netlink/specs/tc.yaml | 151 ++- include/net/dropreason-core.h | 6 + include/uapi/linux/pkt_sched.h | 68 + net/sched/Kconfig | 12 + net/sched/Makefile | 1 + net/sched/sch_dualpi2.c | 1171 +++++++++++++++++ tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/dualpi2.json | 254 ++++ tools/testing/selftests/tc-testing/tdc.sh | 6 +- 9 files changed, 1665 insertions(+), 5 deletions(-) create mode 100644 net/sched/sch_dualpi2.c create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/dualpi2.json -- 2.34.1

1 month, 4 weeks

3
8
0 0

[PATCH net-next V3 0/4] selftests: drv-net: Test XDP native support

by Mohsin Bashir

This patch series add tests to validate XDP native support for PASS, DROP, ABORT, and TX actions, as well as headroom and tailroom adjustment. For adjustment tests, validate support for both the extension and shrinking cases across various packet sizes and offset values. The pass criteria for head/tail adjustment tests require that at-least one adjustment value works for at-least one packet size. This ensure that the variability in maximum supported head/tail adjustment offset across different drivers is being incorporated. The results reported in this series are based on fbnic. However, the series is tested against multiple other drivers including netdevism. Note: The XDP support for fbnic will be added later. --- Change-log: V3: P1: Remove exception handling upon xdp attachment failure for better debuggability P4: Handle the bound issue with the use of bpf_xdp_load_bytes() V2: https://lore.kernel.org/netdev/20250710184351.63797-1-mohsin.bashr@gmail.com V1: https://lore.kernel.org/netdev/20250709173707.3177206-1-mohsin.bashr@gmail.… Mohsin Bashir (4): selftests: drv-net: Test XDP_PASS/DROP support selftests: drv-net: Test XDP_TX support selftests: drv-net: Test tail-adjustment support selftests: drv-net: Test head-adjustment support tools/testing/selftests/drivers/net/Makefile | 1 + tools/testing/selftests/drivers/net/xdp.py | 656 ++++++++++++++++++ .../selftests/net/lib/xdp_native.bpf.c | 538 ++++++++++++++ 3 files changed, 1195 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/xdp.py create mode 100644 tools/testing/selftests/net/lib/xdp_native.bpf.c -- 2.47.1

1 month, 4 weeks

3
10
0 0

[PATCH 0/2] tools/nolibc: add x32 support

by Thomas Weißschuh

Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Thomas Weißschuh (2): tools/nolibc: define time_t in terms of __kernel_old_time_t selftests/nolibc: add x32 test configuration tools/include/nolibc/std.h | 4 +++- tools/testing/selftests/nolibc/Makefile.nolibc | 12 ++++++++++++ tools/testing/selftests/nolibc/run-tests.sh | 7 ++++++- 3 files changed, 21 insertions(+), 2 deletions(-) --- base-commit: 750aef513c610a37a13732ec64902428b839715e change-id: 20250712-nolibc-x32-796a9da4c9ed Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

1 month, 4 weeks

2
3
0 0

[PATCH v2 0/4] HID: core: fix __hid_request when no report ID is used

by Benjamin Tissoires

New version (unchanged for patches 1-3), with a test added so we can detect this. Followup of https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@ro… This initial series attempt at fixing the various bugs discovered by Alan regarding __hid_request(). Syzbot managed to create a report descriptor which presents a feature request of size 0 (still trying to extract it) and this exposed the fact that __hid_request() was incorrectly handling the case when the report ID is not used. Send a first batch of fixes now so we get the feedback from syzbot ASAP. Note: in the series, I also mentioned that the report of size 0 should be stripped out of the HID device, but I'm not entirely sure this would be a good idea in the end. Signed-off-by: Benjamin Tissoires <bentiss(a)kernel.org> --- Changes in v2: - added Tested-by from syzbot (https://lore.kernel.org/r/686e9113.050a0220.385921.0008.GAE@google.com) - added a python test for it - Link to v1: https://lore.kernel.org/r/20250709-report-size-null-v1-0-194912215cbc@kerne… --- Benjamin Tissoires (4): HID: core: ensure the allocated report buffer can contain the reserved report ID HID: core: ensure __hid_request reserves the report ID as the first byte HID: core: do not bypass hid_hw_raw_request selftests/hid: add a test case for the recent syzbot underflow drivers/hid/hid-core.c | 19 +++++-- tools/testing/selftests/hid/tests/test_mouse.py | 70 +++++++++++++++++++++++++ 2 files changed, 84 insertions(+), 5 deletions(-) --- base-commit: 1f988d0788f50d8464f957e793fab356e2937369 change-id: 20250709-report-size-null-37619ea20288 Best regards, -- Benjamin Tissoires <bentiss(a)kernel.org>

1 month, 4 weeks

1
7
0 0

[PATCH v4 00/15] kunit: Introduce UAPI testing framework

by Thomas Weißschuh

Currently testing of userspace and in-kernel API use two different frameworks. kselftests for the userspace ones and Kunit for the in-kernel ones. Besides their different scopes, both have different strengths and limitations: Kunit: * Tests are normal kernel code. * They use the regular kernel toolchain. * They can be packaged and distributed as modules conveniently. Kselftests: * Tests are normal userspace code * They need a userspace toolchain. A kernel cross toolchain is likely not enough. * A fair amout of userland is required to run the tests, which means a full distro or handcrafted rootfs. * There is no way to conveniently package and run kselftests with a given kernel image. * The kselftests makefiles are not as powerful as regular kbuild. For example they are missing proper header dependency tracking or more complex compiler option modifications. Therefore kunit is much easier to run against different kernel configurations and architectures. This series aims to combine kselftests and kunit, avoiding both their limitations. It works by compiling the userspace kselftests as part of the regular kernel build, embedding them into the kunit kernel or module and executing them from there. If the kernel toolchain is not fit to produce userspace because of a missing libc, the kernel's own nolibc can be used instead. The structured TAP output from the kselftest is integrated into the kunit KTAP output transparently, the kunit parser can parse the combined logs together. Further room for improvements: * Call each test in its completely dedicated namespace * Handle additional test files besides the test executable through archives. CPIO, cramfs, etc. * Compatibility with kselftest_harness.h (in progress) * Expose the blobs in debugfs * Provide some convience wrappers around compat userprogs * Figure out a migration path/coexistence solution for kunit UAPI and tools/testing/selftests/ Output from the kunit example testcase, note the output of "example_uapi_tests". $ ./tools/testing/kunit/kunit.py run --kunitconfig lib/kunit example ... Running tests with: $ .kunit/linux kunit.filter_glob=example kunit.enable=1 mem=1G console=tty kunit_shutdown=halt [11:53:53] ================== example (10 subtests) =================== [11:53:53] [PASSED] example_simple_test [11:53:53] [SKIPPED] example_skip_test [11:53:53] [SKIPPED] example_mark_skipped_test [11:53:53] [PASSED] example_all_expect_macros_test [11:53:53] [PASSED] example_static_stub_test [11:53:53] [PASSED] example_static_stub_using_fn_ptr_test [11:53:53] [PASSED] example_priv_test [11:53:53] =================== example_params_test =================== [11:53:53] [SKIPPED] example value 3 [11:53:53] [PASSED] example value 2 [11:53:53] [PASSED] example value 1 [11:53:53] [SKIPPED] example value 0 [11:53:53] =============== [PASSED] example_params_test =============== [11:53:53] [PASSED] example_slow_test [11:53:53] ======================= (4 subtests) ======================= [11:53:53] [PASSED] procfs [11:53:53] [PASSED] userspace test 2 [11:53:53] [SKIPPED] userspace test 3: some reason [11:53:53] [PASSED] userspace test 4 [11:53:53] ================ [PASSED] example_uapi_test ================ [11:53:53] ===================== [PASSED] example ===================== [11:53:53] ============================================================ [11:53:53] Testing complete. Ran 16 tests: passed: 11, skipped: 5 [11:53:53] Elapsed time: 67.543s total, 1.823s configuring, 65.655s building, 0.058s running Based on v6.16-rc1. Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- Changes in v4: - Move Kconfig.nolibc from tools/ to init/ - Drop generic userprogs nolibc integration - Drop generic blob framework - Pick up review tags from David - Extend new kunit TAP parser tests - Add MAINTAINERS entry - Allow CONFIG_KUNIT_UAPI=m - Split /proc validation into dedicated UAPI test - Trim recipient list a bit - Use KUNIT_FAIL_AND_ABORT() over KUNIT_FAIL() - Link to v3: https://lore.kernel.org/r/20250611-kunit-kselftests-v3-0-55e3d148cbc6@linut… Changes in v3: - Reintroduce CONFIG_CC_CAN_LINK_STATIC - Enable CONFIG_ARCH_HAS_NOLIBC for m68k and SPARC - Properly handle 'clean' target for userprogs - Use ramfs over tmpfs to reduce dependencies - Inherit userprogs byte order and ABI from kernel - Drop now unnecessary "#ifndef NOLIBC" - Pick up review tags - Drop usage of __private in blob.h, sparse complains and it is not really necessary - Fix execution on loongarch when using clang - Drop userprogs libgcc handling, it was ugly and is not yet necessary - Link to v2: https://lore.kernel.org/r/20250407-kunit-kselftests-v2-0-454114e287fd@linut… Changes in v2: - Rebase onto v6.15-rc1 - Add documentation and kernel docs - Resolve invalid kconfig breakages - Drop already applied patch "kbuild: implement CONFIG_HEADERS_INSTALL for Usermode Linux" - Drop userprogs CONFIG_WERROR integration, it doesn't need to be part of this series - Replace patch prefix "kconfig" with "kbuild" - Rename kunit_uapi_run_executable() to kunit_uapi_run_kselftest() - Generate private, conflict-free symbols in the blob framework - Handle kselftest exit codes - Handle SIGABRT - Forward output also to kunit debugfs log - Install a fd=0 stdin filedescriptor - Link to v1: https://lore.kernel.org/r/20250217-kunit-kselftests-v1-0-42b4524c3b0a@linut… --- Thomas Weißschuh (15): kbuild: userprogs: avoid duplication of flags inherited from kernel kbuild: userprogs: also inherit byte order and ABI from kernel kbuild: doc: add label for userprogs section init: re-add CONFIG_CC_CAN_LINK_STATIC init: add nolibc build support fs,fork,exit: export symbols necessary for KUnit UAPI support kunit: tool: Add test for nested test result reporting kunit: tool: Don't overwrite test status based on subtest counts kunit: tool: Parse skipped tests from kselftest.h kunit: Always descend into kunit directory during build kunit: qemu_configs: loongarch: Enable LSX/LSAX kunit: Introduce UAPI testing framework kunit: uapi: Add example for UAPI tests kunit: uapi: Introduce preinit executable kunit: uapi: Validate usability of /proc Documentation/dev-tools/kunit/api/index.rst | 5 + Documentation/dev-tools/kunit/api/uapi.rst | 14 + Documentation/kbuild/makefiles.rst | 2 + MAINTAINERS | 11 + Makefile | 7 +- fs/exec.c | 2 + fs/file.c | 1 + fs/filesystems.c | 2 + fs/fs_struct.c | 1 + fs/pipe.c | 2 + include/kunit/uapi.h | 77 ++++++ init/Kconfig | 7 + init/Kconfig.nolibc | 15 + init/Makefile.nolibc | 13 + kernel/exit.c | 3 + kernel/fork.c | 2 + lib/Makefile | 4 - lib/kunit/Kconfig | 14 + lib/kunit/Makefile | 27 +- lib/kunit/kunit-example-test.c | 15 + lib/kunit/kunit-example-uapi.c | 22 ++ lib/kunit/kunit-test-uapi.c | 51 ++++ lib/kunit/kunit-test.c | 23 +- lib/kunit/kunit-uapi.c | 305 +++++++++++++++++++++ lib/kunit/uapi-preinit.c | 63 +++++ tools/testing/kunit/kunit_parser.py | 13 +- tools/testing/kunit/kunit_tool_test.py | 11 + tools/testing/kunit/qemu_configs/loongarch.py | 2 + .../test_is_test_passed-failure-nested.log | 10 + .../test_data/test_is_test_passed-kselftest.log | 3 +- 30 files changed, 714 insertions(+), 13 deletions(-) --- base-commit: 9d5898b413d17510b2a41664a42390a2c79f8bf4 change-id: 20241015-kunit-kselftests-56273bc40442 Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

2 months

7
37
0 0

[PATCH net-next v5 0/3] selftest: net: Add selftest for netpoll

by Breno Leitao

I am submitting a new selftest for the netpoll subsystem specifically targeting the case where the RX is polling in the TX path, which is a case that we don't have any test in the tree today. This is done when netpoll_poll_dev() called, and this test creates a scenario when that is probably. The test does the following: 1) Configuring a single RX/TX queue to increase contention on the interface. 2) Generating background traffic to saturate the network, mimicking real-world congestion. 3) Sending netconsole messages to trigger netpoll polling and monitor its behavior. 4) Using dynamic netconsole targets via configfs, with the ability to delete and recreate targets during the test. 5) Running bpftrace in parallel to verify that netpoll_poll_dev() is called when expected. If it is called, then the test passes, otherwise the test is marked as skipped. In order to achieve it, I stole Jakub's bpftrace helper from [1], and did some small changes that I found useful to use the helper. So, this patchset basically contains: 1) The code stolen from Jakub 2) Improvements on bpftrace() helper 3) The selftest itself Link: https://lore.kernel.org/all/20250421222827.283737-22-kuba@kernel.org/ [1] --- Changes in v5: - Rebased on top of net-next. - Calling bpftrace_stop using the defer helper. (Willem) - Link to v4: https://lore.kernel.org/r/20250702-netpoll_test-v4-0-cec227e85639@debian.org Changes in v4: - Make the test XFail if it doesn't hit the function we are looking for - Toggle the interface while the traffic is flowing. - Bumped the number of messages from 10 to 40 per iterations. * This is hitting ~15 times per run on my vng test. - Decreased the time from 15 seconds to 10 seconds, given that if it didn't hit the function in 10 seconds, 5 seconds extra will not help. - Link to v3: https://lore.kernel.org/r/20250627-netpoll_test-v3-0-575bd200c8a9@debian.org Changes in v3: - Make pylint happy (Simon) - Remove the unnecessary patch in bpftrace to raise an exception when it fails. (Jakub) - Improved the bpftrace code (Willem) - Stop sending messages if bpftrace is not alive anymore. - Link to v2: https://lore.kernel.org/r/20250625-netpoll_test-v2-0-47d27775222c@debian.org Changes in v2: - Stole Jakub's helper to run bpftrace - Removed the DEBUG option and moved logs to logging - Change the code to have a higher chance of calling netpoll_poll_dev(). In my current configuration, it is hitting multiple times during the test. - Save and restore TX/RX queue size (Jakub) - Link to v1: https://lore.kernel.org/r/20250620-netpoll_test-v1-1-5068832f72fc@debian.org --- Breno Leitao (2): selftests: drv-net: Strip '@' prefix from bpftrace map keys selftests: net: add netpoll basic functionality test Jakub Kicinski (1): selftests: drv-net: add helper/wrapper for bpftrace tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/py/__init__.py | 3 +- .../testing/selftests/drivers/net/netpoll_basic.py | 366 +++++++++++++++++++++ tools/testing/selftests/net/lib/py/utils.py | 35 ++ 4 files changed, 404 insertions(+), 1 deletion(-) --- base-commit: 0234362d0af4649bc2ff745e94d06d0c6f0a46ce change-id: 20250612-netpoll_test-a1324d2057c8 Best regards, -- Breno Leitao <leitao(a)debian.org>

2 months

2
6
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror July 2025