July 2025 - Linux-kselftest-mirror

[PATCH V9 0/7] Add NUMA mempolicy support for KVM guest-memfd

by Shivank Garg

This series introduces NUMA-aware memory placement support for KVM guests with guest_memfd memory backends. It builds upon Fuad Tabba's work that enabled host-mapping for guest_memfd memory [1]. == Background == KVM's guest-memfd memory backend currently lacks support for NUMA policy enforcement, causing guest memory allocations to be distributed across host nodes according to kernel's default behavior, irrespective of any policy specified by the VMM. This limitation arises because conventional userspace NUMA control mechanisms like mbind(2) don't work since the memory isn't directly mapped to userspace when allocations occur. Fuad's work [1] provides the necessary mmap capability, and this series leverages it to enable mbind(2). == Implementation == This series implements proper NUMA policy support for guest-memfd by: 1. Adding mempolicy-aware allocation APIs to the filemap layer. 2. Introducing custom inodes (via a dedicated slab-allocated inode cache, kvm_gmem_inode_info) to store NUMA policy and metadata for guest memory. 3. Implementing get/set_policy vm_ops in guest_memfd to support NUMA policy. With these changes, VMMs can now control guest memory placement by mapping guest_memfd file descriptor and using mbind(2) to specify: - Policy modes: default, bind, interleave, or preferred - Host NUMA nodes: List of target nodes for memory allocation These Policies affect only future allocations and do not migrate existing memory. This matches mbind(2)'s default behavior which affects only new allocations unless overridden with MPOL_MF_MOVE/MPOL_MF_MOVE_ALL flags (Not supported for guest_memfd as it is unmovable by design). == Upstream Plan == Phased approach as per David's guest_memfd extension overview [2] and community calls [3]: Phase 1 (this series): 1. Focuses on shared guest_memfd support (non-CoCo VMs). 2. Builds on Fuad's host-mapping work. Phase2 (future work): 1. NUMA support for private guest_memfd (CoCo VMs). 2. Depends on SNP in-place conversion support [4]. This series provides a clean integration path for NUMA-aware memory management for guest_memfd and lays the groundwork for future confidential computing NUMA capabilities. Please review and provide feedback! Thanks, Shivank == Changelog == - v1,v2: Extended the KVM_CREATE_GUEST_MEMFD IOCTL to pass mempolicy. - v3: Introduced fbind() syscall for VMM memory-placement configuration. - v4-v6: Current approach using shared_policy support and vm_ops (based on suggestions from David [5] and guest_memfd bi-weekly upstream call discussion [6]). - v7: Use inodes to store NUMA policy instead of file [7]. - v8: Rebase on top of Fuad's V12: Host mmaping for guest_memfd memory. - v9: Rebase on top of Fuad's V13 and incorporate review comments [1] https://lore.kernel.org/all/20250709105946.4009897-1-tabba@google.com [2] https://lore.kernel.org/all/c1c9591d-218a-495c-957b-ba356c8f8e09@redhat.com [3] https://docs.google.com/document/d/1M6766BzdY1Lhk7LiR5IqVR8B8mG3cr-cxTxOrAo… [4] https://lore.kernel.org/all/20250613005400.3694904-1-michael.roth@amd.com [5] https://lore.kernel.org/all/6fbef654-36e2-4be5-906e-2a648a845278@redhat.com [6] https://lore.kernel.org/all/2b77e055-98ac-43a1-a7ad-9f9065d7f38f@amd.com [7] https://lore.kernel.org/all/diqzbjumm167.fsf@ackerleytng-ctop.c.googlers.com Ackerley Tng (1): KVM: guest_memfd: Use guest mem inodes instead of anonymous inodes Matthew Wilcox (Oracle) (2): mm/filemap: Add NUMA mempolicy support to filemap_alloc_folio() mm/filemap: Extend __filemap_get_folio() to support NUMA memory policies Shivank Garg (4): mm/mempolicy: Export memory policy symbols KVM: guest_memfd: Add slab-allocated inode cache KVM: guest_memfd: Enforce NUMA mempolicy using shared policy KVM: guest_memfd: selftests: Add tests for mmap and NUMA policy support fs/bcachefs/fs-io-buffered.c | 2 +- fs/btrfs/compression.c | 4 +- fs/btrfs/verity.c | 2 +- fs/erofs/zdata.c | 2 +- fs/f2fs/compress.c | 2 +- include/linux/pagemap.h | 18 +- include/uapi/linux/magic.h | 1 + mm/filemap.c | 23 +- mm/mempolicy.c | 6 + mm/readahead.c | 2 +- tools/testing/selftests/kvm/Makefile.kvm | 1 + .../testing/selftests/kvm/guest_memfd_test.c | 122 ++++++++- virt/kvm/guest_memfd.c | 255 ++++++++++++++++-- virt/kvm/kvm_main.c | 7 +- virt/kvm/kvm_mm.h | 10 +- 15 files changed, 408 insertions(+), 49 deletions(-) -- 2.43.0 --- == Earlier Postings == v8: https://lore.kernel.org/all/20250618112935.7629-1-shivankg@amd.com v7: https://lore.kernel.org/all/20250408112402.181574-1-shivankg@amd.com v6: https://lore.kernel.org/all/20250226082549.6034-1-shivankg@amd.com v5: https://lore.kernel.org/all/20250219101559.414878-1-shivankg@amd.com v4: https://lore.kernel.org/all/20250210063227.41125-1-shivankg@amd.com v3: https://lore.kernel.org/all/20241105164549.154700-1-shivankg@amd.com v2: https://lore.kernel.org/all/20240919094438.10987-1-shivankg@amd.com v1: https://lore.kernel.org/all/20240916165743.201087-1-shivankg@amd.com

3 weeks, 6 days

6
23
0 0

[PATCH v3 00/13] stackleak: Support Clang stack depth tracking

by Kees Cook

v3: - split up and drop __init vs inline patches that went via arch trees - apply feedback about preferring __init to __always_inline - incorporate Ritesh Harjani's patch for __init cleanups in powerpc - wider build testing on older compilers v2: https://lore.kernel.org/lkml/20250523043251.it.550-kees@kernel.org/ v1: https://lore.kernel.org/lkml/20250507180852.work.231-kees@kernel.org/ Hi, As part of looking at what GCC plugins could be replaced with Clang implementations, this series uses the recently landed stack depth tracking callback in Clang[1] to implement the stackleak feature. Since the Clang feature is now landed, I'm moving this out of RFC to a v1. Since this touches a lot of arch-specific Makefiles, I tried to trim the CC list down to just mailing lists in those cases, otherwise the CC was giant. Thanks! -Kees [1] https://clang.llvm.org/docs/SanitizerCoverage.html#tracing-stack-depth Kees Cook (12): stackleak: Rename STACKLEAK to KSTACK_ERASE stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS x86: Handle KCOV __init vs inline mismatches arm: Handle KCOV __init vs inline mismatches arm64: Handle KCOV __init vs inline mismatches s390: Handle KCOV __init vs inline mismatches mips: Handle KCOV __init vs inline mismatch init.h: Disable sanitizer coverage for __init and __head kstack_erase: Support Clang stack depth tracking configs/hardening: Enable CONFIG_KSTACK_ERASE configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON Ritesh Harjani (IBM) (1): powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section arch/Kconfig | 4 +- arch/arm/Kconfig | 2 +- arch/arm64/Kconfig | 2 +- arch/riscv/Kconfig | 2 +- arch/s390/Kconfig | 2 +- arch/x86/Kconfig | 2 +- security/Kconfig.hardening | 45 +++++++++------- Makefile | 1 + arch/arm/boot/compressed/Makefile | 2 +- arch/arm/vdso/Makefile | 2 +- arch/arm64/kernel/pi/Makefile | 2 +- arch/arm64/kernel/vdso/Makefile | 3 +- arch/arm64/kvm/hyp/nvhe/Makefile | 2 +- arch/riscv/kernel/pi/Makefile | 2 +- arch/riscv/purgatory/Makefile | 2 +- arch/sparc/vdso/Makefile | 3 +- arch/x86/entry/vdso/Makefile | 3 +- arch/x86/purgatory/Makefile | 2 +- drivers/firmware/efi/libstub/Makefile | 8 +-- drivers/misc/lkdtm/Makefile | 2 +- kernel/Makefile | 10 ++-- lib/Makefile | 2 +- scripts/Makefile.gcc-plugins | 16 +----- scripts/Makefile.kstack_erase | 21 ++++++++ scripts/gcc-plugins/stackleak_plugin.c | 52 +++++++++---------- Documentation/admin-guide/sysctl/kernel.rst | 4 +- Documentation/arch/x86/x86_64/mm.rst | 2 +- Documentation/security/self-protection.rst | 2 +- .../zh_CN/security/self-protection.rst | 2 +- arch/arm64/include/asm/acpi.h | 2 +- arch/mips/include/asm/time.h | 2 +- arch/s390/hypfs/hypfs.h | 2 +- arch/s390/hypfs/hypfs_diag.h | 2 +- arch/x86/entry/calling.h | 4 +- arch/x86/include/asm/acpi.h | 4 +- arch/x86/include/asm/init.h | 2 +- arch/x86/include/asm/realmode.h | 2 +- include/linux/acpi.h | 4 +- include/linux/bootconfig.h | 2 +- include/linux/efi.h | 2 +- include/linux/init.h | 4 +- include/linux/{stackleak.h => kstack_erase.h} | 20 +++---- include/linux/memblock.h | 2 +- include/linux/mfd/dbx500-prcmu.h | 2 +- include/linux/sched.h | 4 +- include/linux/smp.h | 2 +- arch/arm/kernel/entry-common.S | 2 +- arch/arm64/kernel/entry.S | 2 +- arch/riscv/kernel/entry.S | 2 +- arch/s390/kernel/entry.S | 2 +- arch/arm/mm/cache-feroceon-l2.c | 2 +- arch/arm/mm/cache-tauros2.c | 2 +- arch/powerpc/mm/book3s64/hash_utils.c | 6 +-- arch/powerpc/mm/book3s64/radix_pgtable.c | 4 +- arch/s390/mm/init.c | 2 +- arch/x86/kernel/kvm.c | 2 +- arch/x86/mm/init_64.c | 2 +- drivers/clocksource/timer-orion.c | 2 +- .../lkdtm/{stackleak.c => kstack_erase.c} | 26 +++++----- drivers/soc/ti/pm33xx.c | 2 +- fs/proc/base.c | 6 +-- kernel/fork.c | 2 +- kernel/kexec_handover.c | 4 +- kernel/{stackleak.c => kstack_erase.c} | 22 ++++---- tools/objtool/check.c | 4 +- tools/testing/selftests/lkdtm/config | 2 +- MAINTAINERS | 6 ++- kernel/configs/hardening.config | 6 +++ 68 files changed, 204 insertions(+), 172 deletions(-) create mode 100644 scripts/Makefile.kstack_erase rename include/linux/{stackleak.h => kstack_erase.h} (81%) rename drivers/misc/lkdtm/{stackleak.c => kstack_erase.c} (89%) rename kernel/{stackleak.c => kstack_erase.c} (87%) -- 2.34.1

3 weeks, 6 days

9
29
0 0

[PATCH v8 00/14] riscv: add SBI FWFT misaligned exception delegation support

by Clément Léger

The SBI Firmware Feature extension allows the S-mode to request some specific features (either hardware or software) to be enabled. This series uses this extension to request misaligned access exception delegation to S-mode in order to let the kernel handle it. It also adds support for the KVM FWFT SBI extension based on the misaligned access handling infrastructure. FWFT SBI extension is part of the SBI V3.0 specifications [1]. It can be tested using the qemu provided at [2] which contains the series from [3]. Upstream kvm-unit-tests can be used inside kvm to tests the correct delegation of misaligned exceptions. Upstream OpenSBI can be used. Note: Since SBI V3.0 is not yet ratified, FWFT extension API is split between interface only and implementation, allowing to pick only the interface which do not have hard dependencies on SBI. The tests can be run using the kselftest from series [4]. $ qemu-system-riscv64 \ -cpu rv64,trap-misaligned-access=true,v=true \ -M virt \ -m 1024M \ -bios fw_dynamic.bin \ -kernel Image ... # ./misaligned TAP version 13 1..23 # Starting 23 tests from 1 test cases. # RUN global.gp_load_lh ... # OK global.gp_load_lh ok 1 global.gp_load_lh # RUN global.gp_load_lhu ... # OK global.gp_load_lhu ok 2 global.gp_load_lhu # RUN global.gp_load_lw ... # OK global.gp_load_lw ok 3 global.gp_load_lw # RUN global.gp_load_lwu ... # OK global.gp_load_lwu ok 4 global.gp_load_lwu # RUN global.gp_load_ld ... # OK global.gp_load_ld ok 5 global.gp_load_ld # RUN global.gp_load_c_lw ... # OK global.gp_load_c_lw ok 6 global.gp_load_c_lw # RUN global.gp_load_c_ld ... # OK global.gp_load_c_ld ok 7 global.gp_load_c_ld # RUN global.gp_load_c_ldsp ... # OK global.gp_load_c_ldsp ok 8 global.gp_load_c_ldsp # RUN global.gp_load_sh ... # OK global.gp_load_sh ok 9 global.gp_load_sh # RUN global.gp_load_sw ... # OK global.gp_load_sw ok 10 global.gp_load_sw # RUN global.gp_load_sd ... # OK global.gp_load_sd ok 11 global.gp_load_sd # RUN global.gp_load_c_sw ... # OK global.gp_load_c_sw ok 12 global.gp_load_c_sw # RUN global.gp_load_c_sd ... # OK global.gp_load_c_sd ok 13 global.gp_load_c_sd # RUN global.gp_load_c_sdsp ... # OK global.gp_load_c_sdsp ok 14 global.gp_load_c_sdsp # RUN global.fpu_load_flw ... # OK global.fpu_load_flw ok 15 global.fpu_load_flw # RUN global.fpu_load_fld ... # OK global.fpu_load_fld ok 16 global.fpu_load_fld # RUN global.fpu_load_c_fld ... # OK global.fpu_load_c_fld ok 17 global.fpu_load_c_fld # RUN global.fpu_load_c_fldsp ... # OK global.fpu_load_c_fldsp ok 18 global.fpu_load_c_fldsp # RUN global.fpu_store_fsw ... # OK global.fpu_store_fsw ok 19 global.fpu_store_fsw # RUN global.fpu_store_fsd ... # OK global.fpu_store_fsd ok 20 global.fpu_store_fsd # RUN global.fpu_store_c_fsd ... # OK global.fpu_store_c_fsd ok 21 global.fpu_store_c_fsd # RUN global.fpu_store_c_fsdsp ... # OK global.fpu_store_c_fsdsp ok 22 global.fpu_store_c_fsdsp # RUN global.gen_sigbus ... [12797.988647] misaligned[618]: unhandled signal 7 code 0x1 at 0x0000000000014dc0 in misaligned[4dc0,10000+76000] [12797.988990] CPU: 0 UID: 0 PID: 618 Comm: misaligned Not tainted 6.13.0-rc6-00008-g4ec4468967c9-dirty #51 [12797.989169] Hardware name: riscv-virtio,qemu (DT) [12797.989264] epc : 0000000000014dc0 ra : 0000000000014d00 sp : 00007fffe165d100 [12797.989407] gp : 000000000008f6e8 tp : 0000000000095760 t0 : 0000000000000008 [12797.989544] t1 : 00000000000965d8 t2 : 000000000008e830 s0 : 00007fffe165d160 [12797.989692] s1 : 000000000000001a a0 : 0000000000000000 a1 : 0000000000000002 [12797.989831] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffffdeadbeef [12797.989964] a5 : 000000000008ef61 a6 : 626769735f6e0000 a7 : fffffffffffff000 [12797.990094] s2 : 0000000000000001 s3 : 00007fffe165d838 s4 : 00007fffe165d848 [12797.990238] s5 : 000000000000001a s6 : 0000000000010442 s7 : 0000000000010200 [12797.990391] s8 : 000000000000003a s9 : 0000000000094508 s10: 0000000000000000 [12797.990526] s11: 0000555567460668 t3 : 00007fffe165d070 t4 : 00000000000965d0 [12797.990656] t5 : fefefefefefefeff t6 : 0000000000000073 [12797.990756] status: 0000000200004020 badaddr: 000000000008ef61 cause: 0000000000000006 [12797.990911] Code: 8793 8791 3423 fcf4 3783 fc84 c737 dead 0713 eef7 (c398) 0001 # OK global.gen_sigbus ok 23 global.gen_sigbus # PASSED: 23 / 23 tests passed. # Totals: pass:23 fail:0 xfail:0 xpass:0 skip:0 error:0 With kvm-tools: # lkvm run -k sbi.flat -m 128 Info: # lkvm run -k sbi.flat -m 128 -c 1 --name guest-97 Info: Removed ghost socket file "/root/.lkvm//guest-97.sock". ########################################################################## # kvm-unit-tests ########################################################################## ... [test messages elided] PASS: sbi: fwft: FWFT extension probing no error PASS: sbi: fwft: get/set reserved feature 0x6 error == SBI_ERR_DENIED PASS: sbi: fwft: get/set reserved feature 0x3fffffff error == SBI_ERR_DENIED PASS: sbi: fwft: get/set reserved feature 0x80000000 error == SBI_ERR_DENIED PASS: sbi: fwft: get/set reserved feature 0xbfffffff error == SBI_ERR_DENIED PASS: sbi: fwft: misaligned_deleg: Get misaligned deleg feature no error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature invalid value error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature invalid value error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value no error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value 0 PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value no error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value 1 PASS: sbi: fwft: misaligned_deleg: Verify misaligned load exception trap in supervisor SUMMARY: 50 tests, 2 unexpected failures, 12 skipped This series is available at [5]. Link: https://github.com/riscv-non-isa/riscv-sbi-doc/releases/download/vv3.0-rc2/… [1] Link: https://github.com/rivosinc/qemu/tree/dev/cleger/misaligned [2] Link: https://lore.kernel.org/all/20241211211933.198792-3-fkonrad@amd.com/T/ [3] Link: https://lore.kernel.org/linux-riscv/20250414123543.1615478-1-cleger@rivosin… [4] Link: https://github.com/rivosinc/linux/tree/dev/cleger/fwft [5] --- V8: - Move misaligned_access_speed under CONFIG_RISCV_MISALIGNED and add a separate commit for that. V7: - Fix ifdefery build problems - Move sbi_fwft_is_supported with fwft_set_req struct - Added Atish Reviewed-by - Updated KVM vcpu cfg hedeleg value in set_delegation - Changed SBI ETIME error mapping to ETIMEDOUT - Fixed a few typo reported by Alok V6: - Rename FWFT interface to remove "_local" - Fix test for MEDELEG values in KVM FWFT support - Add __init for unaligned_access_init() - Rebased on master V5: - Return ERANGE as mapping for SBI_ERR_BAD_RANGE - Removed unused sbi_fwft_get() - Fix kernel for sbi_fwft_local_set_cpumask() - Fix indentation for sbi_fwft_local_set() - Remove spurious space in kvm_sbi_fwft_ops. - Rebased on origin/master - Remove fixes commits and sent them as a separate series [4] V4: - Check SBI version 3.0 instead of 2.0 for FWFT presence - Use long for kvm_sbi_fwft operation return value - Init KVM sbi extension even if default_disabled - Remove revert_on_fail parameter for sbi_fwft_feature_set(). - Fix comments for sbi_fwft_set/get() - Only handle local features (there are no globals yet in the spec) - Add new SBI errors to sbi_err_map_linux_errno() V3: - Added comment about kvm sbi fwft supported/set/get callback requirements - Move struct kvm_sbi_fwft_feature in kvm_sbi_fwft.c - Add a FWFT interface V2: - Added Kselftest for misaligned testing - Added get_user() usage instead of __get_user() - Reenable interrupt when possible in misaligned access handling - Document that riscv supports unaligned-traps - Fix KVM extension state when an init function is present - Rework SBI misaligned accesses trap delegation code - Added support for CPU hotplugging - Added KVM SBI reset callback - Added reset for KVM SBI FWFT lock - Return SBI_ERR_DENIED_LOCKED when LOCK flag is set Clément Léger (14): riscv: sbi: add Firmware Feature (FWFT) SBI extensions definitions riscv: sbi: remove useless parenthesis riscv: sbi: add new SBI error mappings riscv: sbi: add FWFT extension interface riscv: sbi: add SBI FWFT extension calls riscv: misaligned: request misaligned exception from SBI riscv: misaligned: use on_each_cpu() for scalar misaligned access probing riscv: misaligned: declare misaligned_access_speed under CONFIG_RISCV_MISALIGNED riscv: misaligned: move emulated access uniformity check in a function riscv: misaligned: add a function to check misalign trap delegability RISC-V: KVM: add SBI extension init()/deinit() functions RISC-V: KVM: add SBI extension reset callback RISC-V: KVM: add support for FWFT SBI extension RISC-V: KVM: add support for SBI_FWFT_MISALIGNED_DELEG arch/riscv/include/asm/cpufeature.h | 14 +- arch/riscv/include/asm/kvm_host.h | 5 +- arch/riscv/include/asm/kvm_vcpu_sbi.h | 12 + arch/riscv/include/asm/kvm_vcpu_sbi_fwft.h | 29 +++ arch/riscv/include/asm/sbi.h | 60 +++++ arch/riscv/include/uapi/asm/kvm.h | 1 + arch/riscv/kernel/sbi.c | 81 ++++++- arch/riscv/kernel/traps_misaligned.c | 112 ++++++++- arch/riscv/kernel/unaligned_access_speed.c | 8 +- arch/riscv/kvm/Makefile | 1 + arch/riscv/kvm/vcpu.c | 4 +- arch/riscv/kvm/vcpu_sbi.c | 54 +++++ arch/riscv/kvm/vcpu_sbi_fwft.c | 257 +++++++++++++++++++++ arch/riscv/kvm/vcpu_sbi_sta.c | 3 +- 14 files changed, 620 insertions(+), 21 deletions(-) create mode 100644 arch/riscv/include/asm/kvm_vcpu_sbi_fwft.h create mode 100644 arch/riscv/kvm/vcpu_sbi_fwft.c -- 2.49.0

3 weeks, 6 days

9
38
0 0

[PATCH v3 0/7] selftests/mm: Fix false positives and skip unsupported tests

by Aboorva Devarajan

Hi all, This patch series addresses false positives in the generic mm selftests and skips tests that cannot run correctly due to missing features or system limitations. v2: https://lore.kernel.org/all/20250703060656.54345-1-aboorvad@linux.ibm.com/ Changes in v3: - Rebased onto the latest mm-new branch, top commit of the base is commit 0709ddf8951f ("mm: add zblock allocator"). - Minor refactor based on the review comments. - Included the tags from the previous version. --- v1: https://lore.kernel.org/all/20250616160632.35250-1-aboorvad@linux.ibm.com/ Changes in v2: - Rebased onto the mm-new branch, top commit of the base is commit 3b4a8ad89f7e ("mm: add zblock allocator"). - Split some patches for clarity. - Updated virtual_address_range test to support testing 4PB VA on PPC64. - Added proper Fixes: tags. - Included a patch to skip a failing userfaultfd test when unsupported, instead of reporting a failure. --- Please let us know if you have any further comments. Thanks, Aboorva Aboorva Devarajan (3): selftests/mm: Fix child process exit codes in ksm_functional_tests selftests/mm: Skip thuge-gen test if system is not setup properly selftests/mm: Skip hugepage-mremap test if userfaultfd unavailable Donet Tom (4): mm/selftests: Fix incorrect pointer being passed to mark_range() selftests/mm: Add support to test 4PB VA on PPC64 selftest/mm: Fix ksm_funtional_test failures mm/selftests: Fix split_huge_page_test failure on systems with 64KB page size tools/testing/selftests/mm/hugepage-mremap.c | 16 +++++++++-- .../selftests/mm/ksm_functional_tests.c | 28 +++++++++++++------ .../selftests/mm/split_huge_page_test.c | 23 +++++++++------ tools/testing/selftests/mm/thuge-gen.c | 11 +++++--- .../selftests/mm/virtual_address_range.c | 13 ++++++++- 5 files changed, 67 insertions(+), 24 deletions(-) -- 2.47.1

4 weeks, 1 day

4
20
0 0

[PATCH v19 00/27] riscv control-flow integrity for usermode

by Deepak Gupta

Basics and overview =================== Software with larger attack surfaces (e.g. network facing apps like databases, browsers or apps relying on browser runtimes) suffer from memory corruption issues which can be utilized by attackers to bend control flow of the program to eventually gain control (by making their payload executable). Attackers are able to perform such attacks by leveraging call-sites which rely on indirect calls or return sites which rely on obtaining return address from stack memory. To mitigate such attacks, risc-v extension zicfilp enforces that all indirect calls must land on a landing pad instruction `lpad` else cpu will raise software check exception (a new cpu exception cause code on riscv). Similarly for return flow, risc-v extension zicfiss extends architecture with - `sspush` instruction to push return address on a shadow stack - `sspopchk` instruction to pop return address from shadow stack and compare with input operand (i.e. return address on stack) - `sspopchk` to raise software check exception if comparision above was a mismatch - Protection mechanism using which shadow stack is not writeable via regular store instructions More information an details can be found at extensions github repo [1]. Equivalent to landing pad (zicfilp) on x86 is `ENDBRANCH` instruction in Intel CET [3] and branch target identification (BTI) [4] on arm. Similarly x86's Intel CET has shadow stack [5] and arm64 has guarded control stack (GCS) [6] which are very similar to risc-v's zicfiss shadow stack. x86 and arm64 support for user mode shadow stack is already in mainline. Kernel awareness for user control flow integrity ================================================ This series picks up Samuel Holland's envcfg changes [2] as well. So if those are being applied independently, they should be removed from this series. Enabling: In order to maintain compatibility and not break anything in user mode, kernel doesn't enable control flow integrity cpu extensions on binary by default. Instead exposes a prctl interface to enable, disable and lock the shadow stack or landing pad feature for a task. This allows userspace (loader) to enumerate if all objects in its address space are compiled with shadow stack and landing pad support and accordingly enable the feature. Additionally if a subsequent `dlopen` happens on a library, user mode can take a decision again to disable the feature (if incoming library is not compiled with support) OR terminate the task (if user mode policy is strict to have all objects in address space to be compiled with control flow integirty cpu feature). prctl to enable shadow stack results in allocating shadow stack from virtual memory and activating for user address space. x86 and arm64 are also following same direction due to similar reason(s). clone/fork: On clone and fork, cfi state for task is inherited by child. Shadow stack is part of virtual memory and is a writeable memory from kernel perspective (writeable via a restricted set of instructions aka shadow stack instructions) Thus kernel changes ensure that this memory is converted into read-only when fork/clone happens and COWed when fault is taken due to sspush, sspopchk or ssamoswap. In case `CLONE_VM` is specified and shadow stack is to be enabled, kernel will automatically allocate a shadow stack for that clone call. map_shadow_stack: x86 introduced `map_shadow_stack` system call to allow user space to explicitly map shadow stack memory in its address space. It is useful to allocate shadow for different contexts managed by a single thread (green threads or contexts) risc-v implements this system call as well. signal management: If shadow stack is enabled for a task, kernel performs an asynchronous control flow diversion to deliver the signal and eventually expects userspace to issue sigreturn so that original execution can be resumed. Even though resume context is prepared by kernel, it is in user space memory and is subject to memory corruption and corruption bugs can be utilized by attacker in this race window to perform arbitrary sigreturn and eventually bypass cfi mechanism. Another issue is how to ensure that cfi related state on sigcontext area is not trampled by legacy apps or apps compiled with old kernel headers. In order to mitigate control-flow hijacting, kernel prepares a token and place it on shadow stack before signal delivery and places address of token in sigcontext structure. During sigreturn, kernel obtains address of token from sigcontext struture, reads token from shadow stack and validates it and only then allow sigreturn to succeed. Compatiblity issue is solved by adopting dynamic sigcontext management introduced for vector extension. This series re-factor the code little bit to allow future sigcontext management easy (as proposed by Andy Chiu from SiFive) config and compilation: Introduce a new risc-v config option `CONFIG_RISCV_USER_CFI`. Selecting this config option picks the kernel support for user control flow integrity. This optin is presented only if toolchain has shadow stack and landing pad support. And is on purpose guarded by toolchain support. Reason being that eventually vDSO also needs to be compiled in with shadow stack and landing pad support. vDSO compile patches are not included as of now because landing pad labeling scheme is yet to settle for usermode runtime. To get more information on kernel interactions with respect to zicfilp and zicfiss, patch series adds documentation for `zicfilp` and `zicfiss` in following: Documentation/arch/riscv/zicfiss.rst Documentation/arch/riscv/zicfilp.rst How to test this series ======================= Toolchain --------- $ git clone git@github.com:sifive/riscv-gnu-toolchain.git -b cfi-dev $ riscv-gnu-toolchain/configure --prefix=<path-to-where-to-build> --with-arch=rv64gc_zicfilp_zicfiss --enable-linux --disable-gdb --with-extra-multilib-test="rv64gc_zicfilp_zicfiss-lp64d:-static" $ make -j$(nproc) Qemu ---- Get the lastest qemu $ cd qemu $ mkdir build $ cd build $ ../configure --target-list=riscv64-softmmu $ make -j$(nproc) Opensbi ------- $ git clone git@github.com:deepak0414/opensbi.git -b v6_cfi_spec_split_opensbi $ make CROSS_COMPILE=<your riscv toolchain> -j$(nproc) PLATFORM=generic Linux ----- Running defconfig is fine. CFI is enabled by default if the toolchain supports it. $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) defconfig $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) In case you're building your own rootfs using toolchain, please make sure you pick following patch to ensure that vDSO compiled with lpad and shadow stack. "arch/riscv: compile vdso with landing pad" Branch where above patch can be picked https://github.com/deepak0414/linux-riscv-cfi/tree/vdso_user_cfi_v6.12-rc1 Running ------- Modify your qemu command to have: -bios <path-to-cfi-opensbi>/build/platform/generic/firmware/fw_dynamic.bin -cpu rv64,zicfilp=true,zicfiss=true,zimop=true,zcmop=true vDSO related Opens (in the flux) ================================= I am listing these opens for laying out plan and what to expect in future patch sets. And of course for the sake of discussion. Shadow stack and landing pad enabling in vDSO ---------------------------------------------- vDSO must have shadow stack and landing pad support compiled in for task to have shadow stack and landing pad support. This patch series doesn't enable that (yet). Enabling shadow stack support in vDSO should be straight forward (intend to do that in next versions of patch set). Enabling landing pad support in vDSO requires some collaboration with toolchain folks to follow a single label scheme for all object binaries. This is necessary to ensure that all indirect call-sites are setting correct label and target landing pads are decorated with same label scheme. How many vDSOs --------------- Shadow stack instructions are carved out of zimop (may be operations) and if CPU doesn't implement zimop, they're illegal instructions. Kernel could be running on a CPU which may or may not implement zimop. And thus kernel will have to carry 2 different vDSOs and expose the appropriate one depending on whether CPU implements zimop or not. References ========== [1] - https://github.com/riscv/riscv-cfi [2] - https://lore.kernel.org/all/20240814081126.956287-1-samuel.holland@sifive.c… [3] - https://lwn.net/Articles/889475/ [4] - https://developer.arm.com/documentation/109576/0100/Branch-Target-Identific… [5] - https://www.intel.com/content/dam/develop/external/us/en/documents/catc17-i… [6] - https://lwn.net/Articles/940403/ To: Thomas Gleixner <tglx(a)linutronix.de> To: Ingo Molnar <mingo(a)redhat.com> To: Borislav Petkov <bp(a)alien8.de> To: Dave Hansen <dave.hansen(a)linux.intel.com> To: x86(a)kernel.org To: H. Peter Anvin <hpa(a)zytor.com> To: Andrew Morton <akpm(a)linux-foundation.org> To: Liam R. Howlett <Liam.Howlett(a)oracle.com> To: Vlastimil Babka <vbabka(a)suse.cz> To: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> To: Paul Walmsley <paul.walmsley(a)sifive.com> To: Palmer Dabbelt <palmer(a)dabbelt.com> To: Albert Ou <aou(a)eecs.berkeley.edu> To: Conor Dooley <conor(a)kernel.org> To: Rob Herring <robh(a)kernel.org> To: Krzysztof Kozlowski <krzk+dt(a)kernel.org> To: Arnd Bergmann <arnd(a)arndb.de> To: Christian Brauner <brauner(a)kernel.org> To: Peter Zijlstra <peterz(a)infradead.org> To: Oleg Nesterov <oleg(a)redhat.com> To: Eric Biederman <ebiederm(a)xmission.com> To: Kees Cook <kees(a)kernel.org> To: Jonathan Corbet <corbet(a)lwn.net> To: Shuah Khan <shuah(a)kernel.org> To: Jann Horn <jannh(a)google.com> To: Conor Dooley <conor+dt(a)kernel.org> To: Miguel Ojeda <ojeda(a)kernel.org> To: Alex Gaynor <alex.gaynor(a)gmail.com> To: Boqun Feng <boqun.feng(a)gmail.com> To: Gary Guo <gary(a)garyguo.net> To: Björn Roy Baron <bjorn3_gh(a)protonmail.com> To: Benno Lossin <benno.lossin(a)proton.me> To: Andreas Hindborg <a.hindborg(a)kernel.org> To: Alice Ryhl <aliceryhl(a)google.com> To: Trevor Gross <tmgross(a)umich.edu> Cc: linux-kernel(a)vger.kernel.org Cc: linux-fsdevel(a)vger.kernel.org Cc: linux-mm(a)kvack.org Cc: linux-riscv(a)lists.infradead.org Cc: devicetree(a)vger.kernel.org Cc: linux-arch(a)vger.kernel.org Cc: linux-doc(a)vger.kernel.org Cc: linux-kselftest(a)vger.kernel.org Cc: alistair.francis(a)wdc.com Cc: richard.henderson(a)linaro.org Cc: jim.shu(a)sifive.com Cc: andybnac(a)gmail.com Cc: kito.cheng(a)sifive.com Cc: charlie(a)rivosinc.com Cc: atishp(a)rivosinc.com Cc: evan(a)rivosinc.com Cc: cleger(a)rivosinc.com Cc: alexghiti(a)rivosinc.com Cc: samitolvanen(a)google.com Cc: broonie(a)kernel.org Cc: rick.p.edgecombe(a)intel.com Cc: rust-for-linux(a)vger.kernel.org changelog --------- v19: - riscv_nousercfi was `int`. changed it to unsigned long. Thanks to Alex Ghiti for reporting it. It was a bug. - ELP is cleared on trap entry only when CONFIG_64BIT. - restore ssp back on return to usermode was being done before `riscv_v_context_nesting_end` on trap exit path. If kernel shadow stack were enabled this would result in kernel operating on user shadow stack and panic (as I found in my testing of kcfi patch series). So fixed that. v18: - rebased on 6.16-rc1 - uprobe handling clears ELP in sstatus image in pt_regs - vdso was missing shadow stack elf note for object files. added that. Additional asm file for vdso needed the elf marker flag. toolchain should complain if `-fcf-protection=full` and marker is missing for object generated from asm file. Asked toolchain folks to fix this. Although no reason to gate the merge on that. - Split up compile options for march and fcf-protection in vdso Makefile - CONFIG_RISCV_USER_CFI option is moved under "Kernel features" menu Added `arch/riscv/configs/hardening.config` fragment which selects CONFIG_RISCV_USER_CFI v17: - fixed warnings due to empty macros in usercfi.h (reported by alexg) - fixed prefixes in commit titles reported by alexg - took below uprobe with fcfi v2 patch from Zong Li and squashed it with "riscv/traps: Introduce software check exception and uprobe handling" https://lore.kernel.org/all/20250604093403.10916-1-zong.li@sifive.com/ v16: - If FWFT is not implemented or returns error for shadow stack activation, then no_usercfi is set to disable shadow stack. Although this should be picked up by extension validation and activation. Fixed this bug for zicfilp and zicfiss both. Thanks to Charlie Jenkins for reporting this. - If toolchain doesn't support cfi, cfi kselftest shouldn't build. Suggested by Charlie Jenkins. - Default for CONFIG_RISCV_USER_CFI is set to no. Charlie/Atish suggested to keep it off till we have more hardware availibility with RVA23 profile and zimop/zcmop implemented. Else this will start breaking people's workflow - Includes the fix if "!RV64 and !SBI" then definitions for FWFT in asm-offsets.c error. v15: - Toolchain has been updated to include `-fcf-protection` flag. This exists for x86 as well. Updated kernel patches to compile vDSO and selftest to compile with `fcf-protection=full` flag. - selecting CONFIG_RISCV_USERCFI selects CONFIG_RISCV_SBI. - Patch to enable shadow stack for kernel wasn't hidden behind CONFIG_RISCV_USERCFI and CONFIG_RISCV_SBI. fixed that. v14: - rebased on top of palmer/sbi-v3. Thus dropped clement's FWFT patches Updated RISCV_ISA_EXT_XXXX in hwcap and hwprobe constants. - Took Radim's suggestions on bitfields. - Placed cfi_state at the end of thread_info block so that current situation is not disturbed with respect to member fields of thread_info in single cacheline. v13: - cpu_supports_shadow_stack/cpu_supports_indirect_br_lp_instr uses riscv_has_extension_unlikely() - uses nops(count) to create nop slide - RISCV_ACQUIRE_BARRIER is not needed in `amo_user_shstk`. Removed it - changed ternaries to simply use implicit casting to convert to bool. - kernel command line allows to disable zicfilp and zicfiss independently. updated kernel-parameters.txt. - ptrace user abi for cfi uses bitmasks instead of bitfields. Added ptrace kselftest. - cosmetic and grammatical changes to documentation. v12: - It seems like I had accidently squashed arch agnostic indirect branch tracking prctl and riscv implementation of those prctls. Split them again. - set_shstk_status/set_indir_lp_status perform CSR writes only when CPU support is available. As suggested by Zong Li. - Some minor clean up in kselftests as suggested by Zong Li. v11: - patch "arch/riscv: compile vdso with landing pad" was unconditionally selecting `_zicfilp` for vDSO compile. fixed that. Changed `lpad 1` to to `lpad 0`. v10: - dropped "mm: helper `is_shadow_stack_vma` to check shadow stack vma". This patch is not that interesting to this patch series for risc-v. There are instances in arch directories where VM_SHADOW_STACK flag is anyways used. Dropping this patch to expedite merging in riscv tree. - Took suggestions from `Clement` on "riscv: zicfiss / zicfilp enumeration" to validate presence of cfi based on config. - Added a patch for vDSO to have `lpad 0`. I had omitted this earlier to make sure we add single vdso object with cfi enabled. But a vdso object with scheme of zero labeled landing pad is least common denominator and should work with all objects of zero labeled as well as function-signature labeled objects. v9: - rebased on master (39a803b754d5 fix braino in "9p: fix ->rename_sem exclusion") - dropped "mm: Introduce ARCH_HAS_USER_SHADOW_STACK" (master has it from arm64/gcs) - dropped "prctl: arch-agnostic prctl for shadow stack" (master has it from arm64/gcs) v8: - rebased on palmer/for-next - dropped samuel holland's `envcfg` context switch patches. they are in parlmer/for-next v7: - Removed "riscv/Kconfig: enable HAVE_EXIT_THREAD for riscv" Instead using `deactivate_mm` flow to clean up. see here for more context https://lore.kernel.org/all/20230908203655.543765-1-rick.p.edgecombe@intel.… - Changed the header include in `kselftest`. Hopefully this fixes compile issue faced by Zong Li at SiFive. - Cleaned up an orphaned change to `mm/mmap.c` in below patch "riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE" - Lock interfaces for shadow stack and indirect branch tracking expect arg == 0 Any future evolution of this interface should accordingly define how arg should be setup. - `mm/map.c` has an instance of using `VM_SHADOW_STACK`. Fixed it to use helper `is_shadow_stack_vma`. - Link to v6: https://lore.kernel.org/r/20241008-v5_user_cfi_series-v6-0-60d9fe073f37@riv… v6: - Picked up Samuel Holland's changes as is with `envcfg` placed in `thread` instead of `thread_info` - fixed unaligned newline escapes in kselftest - cleaned up messages in kselftest and included test output in commit message - fixed a bug in clone path reported by Zong Li - fixed a build issue if CONFIG_RISCV_ISA_V is not selected (this was introduced due to re-factoring signal context management code) v5: - rebased on v6.12-rc1 - Fixed schema related issues in device tree file - Fixed some of the documentation related issues in zicfilp/ss.rst (style issues and added index) - added `SHADOW_STACK_SET_MARKER` so that implementation can define base of shadow stack. - Fixed warnings on definitions added in usercfi.h when CONFIG_RISCV_USER_CFI is not selected. - Adopted context header based signal handling as proposed by Andy Chiu - Added support for enabling kernel mode access to shadow stack using FWFT (https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/src/ext-firmware…) - Link to v5: https://lore.kernel.org/r/20241001-v5_user_cfi_series-v1-0-3ba65b6e550f@riv… (Note: I had an issue in my workflow due to which version number wasn't picked up correctly while sending out patches) v4: - rebased on 6.11-rc6 - envcfg: Converged with Samuel Holland's patches for envcfg management on per- thread basis. - vma_is_shadow_stack is renamed to is_vma_shadow_stack - picked up Mark Brown's `ARCH_HAS_USER_SHADOW_STACK` patch - signal context: using extended context management to maintain compatibility. - fixed `-Wmissing-prototypes` compiler warnings for prctl functions - Documentation fixes and amending typos. - Link to v4: https://lore.kernel.org/all/20240912231650.3740732-1-debug@rivosinc.com/ v3: - envcfg logic to pick up base envcfg had a bug where `ENVCFG_CBZE` could have been picked on per task basis, even though CPU didn't implement it. Fixed in this series. - dt-bindings As suggested, split into separate commit. fixed the messaging that spec is in public review - arch_is_shadow_stack change arch_is_shadow_stack changed to vma_is_shadow_stack - hwprobe zicfiss / zicfilp if present will get enumerated in hwprobe - selftests As suggested, added object and binary filenames to .gitignore Selftest binary anyways need to be compiled with cfi enabled compiler which will make sure that landing pad and shadow stack are enabled. Thus removed separate enable/disable tests. Cleaned up tests a bit. - Link to v3: https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/ v2: - Using config `CONFIG_RISCV_USER_CFI`, kernel support for riscv control flow integrity for user mode programs can be compiled in the kernel. - Enabling of control flow integrity for user programs is left to user runtime - This patch series introduces arch agnostic `prctls` to enable shadow stack and indirect branch tracking. And implements them on riscv. --- Changes in v19: - Link to v18: https://lore.kernel.org/r/20250711-v5_user_cfi_series-v18-0-a8ee62f9f38e@ri… Changes in v18: - Link to v17: https://lore.kernel.org/r/20250604-v5_user_cfi_series-v17-0-4565c2cf869f@ri… Changes in v17: - Link to v16: https://lore.kernel.org/r/20250522-v5_user_cfi_series-v16-0-64f61a35eee7@ri… Changes in v16: - Link to v15: https://lore.kernel.org/r/20250502-v5_user_cfi_series-v15-0-914966471885@ri… Changes in v15: - changelog posted just below cover letter - Link to v14: https://lore.kernel.org/r/20250429-v5_user_cfi_series-v14-0-5239410d012a@ri… Changes in v14: - changelog posted just below cover letter - Link to v13: https://lore.kernel.org/r/20250424-v5_user_cfi_series-v13-0-971437de586a@ri… Changes in v13: - changelog posted just below cover letter - Link to v12: https://lore.kernel.org/r/20250314-v5_user_cfi_series-v12-0-e51202b53138@ri… Changes in v12: - changelog posted just below cover letter - Link to v11: https://lore.kernel.org/r/20250310-v5_user_cfi_series-v11-0-86b36cbfb910@ri… Changes in v11: - changelog posted just below cover letter - Link to v10: https://lore.kernel.org/r/20250210-v5_user_cfi_series-v10-0-163dcfa31c60@ri… --- Andy Chiu (1): riscv: signal: abstract header saving for setup_sigcontext Deepak Gupta (25): mm: VM_SHADOW_STACK definition for riscv dt-bindings: riscv: zicfilp and zicfiss in dt-bindings (extensions.yaml) riscv: zicfiss / zicfilp enumeration riscv: zicfiss / zicfilp extension csr and bit definitions riscv: usercfi state for task and save/restore of CSR_SSP on trap entry/exit riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE riscv/mm: manufacture shadow stack pte riscv/mm: teach pte_mkwrite to manufacture shadow stack PTEs riscv/mm: write protect and shadow stack riscv/mm: Implement map_shadow_stack() syscall riscv/shstk: If needed allocate a new shadow stack on clone riscv: Implements arch agnostic shadow stack prctls prctl: arch-agnostic prctl for indirect branch tracking riscv: Implements arch agnostic indirect branch tracking prctls riscv/traps: Introduce software check exception and uprobe handling riscv/signal: save and restore of shadow stack for signal riscv/kernel: update __show_regs to print shadow stack register riscv/ptrace: riscv cfi status and state via ptrace and in core files riscv/hwprobe: zicfilp / zicfiss enumeration in hwprobe riscv: kernel command line option to opt out of user cfi riscv: enable kernel access to shadow stack memory via FWFT sbi call riscv: create a config for shadow stack and landing pad instr support riscv: Documentation for landing pad / indirect branch tracking riscv: Documentation for shadow stack on riscv kselftest/riscv: kselftest for user mode cfi Jim Shu (1): arch/riscv: compile vdso with landing pad and shadow stack note Documentation/admin-guide/kernel-parameters.txt | 8 + Documentation/arch/riscv/index.rst | 2 + Documentation/arch/riscv/zicfilp.rst | 115 +++++ Documentation/arch/riscv/zicfiss.rst | 179 +++++++ .../devicetree/bindings/riscv/extensions.yaml | 14 + arch/riscv/Kconfig | 21 + arch/riscv/Makefile | 5 +- arch/riscv/configs/hardening.config | 4 + arch/riscv/include/asm/asm-prototypes.h | 1 + arch/riscv/include/asm/assembler.h | 44 ++ arch/riscv/include/asm/cpufeature.h | 12 + arch/riscv/include/asm/csr.h | 16 + arch/riscv/include/asm/entry-common.h | 2 + arch/riscv/include/asm/hwcap.h | 2 + arch/riscv/include/asm/mman.h | 26 + arch/riscv/include/asm/mmu_context.h | 7 + arch/riscv/include/asm/pgtable.h | 30 +- arch/riscv/include/asm/processor.h | 1 + arch/riscv/include/asm/thread_info.h | 3 + arch/riscv/include/asm/usercfi.h | 95 ++++ arch/riscv/include/asm/vector.h | 3 + arch/riscv/include/uapi/asm/hwprobe.h | 2 + arch/riscv/include/uapi/asm/ptrace.h | 34 ++ arch/riscv/include/uapi/asm/sigcontext.h | 1 + arch/riscv/kernel/Makefile | 1 + arch/riscv/kernel/asm-offsets.c | 10 + arch/riscv/kernel/cpufeature.c | 27 + arch/riscv/kernel/entry.S | 38 ++ arch/riscv/kernel/head.S | 27 + arch/riscv/kernel/process.c | 27 +- arch/riscv/kernel/ptrace.c | 95 ++++ arch/riscv/kernel/signal.c | 148 +++++- arch/riscv/kernel/sys_hwprobe.c | 2 + arch/riscv/kernel/sys_riscv.c | 10 + arch/riscv/kernel/traps.c | 54 ++ arch/riscv/kernel/usercfi.c | 545 +++++++++++++++++++++ arch/riscv/kernel/vdso/Makefile | 11 +- arch/riscv/kernel/vdso/flush_icache.S | 4 + arch/riscv/kernel/vdso/getcpu.S | 4 + arch/riscv/kernel/vdso/rt_sigreturn.S | 4 + arch/riscv/kernel/vdso/sys_hwprobe.S | 4 + arch/riscv/kernel/vdso/vgetrandom-chacha.S | 5 +- arch/riscv/mm/init.c | 2 +- arch/riscv/mm/pgtable.c | 16 + include/linux/cpu.h | 4 + include/linux/mm.h | 7 + include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 27 + kernel/sys.c | 30 ++ tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/cfi/.gitignore | 3 + tools/testing/selftests/riscv/cfi/Makefile | 16 + tools/testing/selftests/riscv/cfi/cfi_rv_test.h | 82 ++++ tools/testing/selftests/riscv/cfi/riscv_cfi_test.c | 173 +++++++ tools/testing/selftests/riscv/cfi/shadowstack.c | 385 +++++++++++++++ tools/testing/selftests/riscv/cfi/shadowstack.h | 27 + 56 files changed, 2389 insertions(+), 30 deletions(-) --- base-commit: a2a05801de77ca5122fc34e3eb84d6359ef70389 change-id: 20240930-v5_user_cfi_series-3dc332f8f5b2 -- - debug

1 month

4
33
0 0

[PATCH 0/9] kunit: Refactor and extend KUnit's

by Marie Zhussupova

Hello! KUnit offers a parameterized testing framework, where tests can be run multiple times with different inputs. Currently, the same `struct kunit` is used for each parameter execution. After each run, the test instance gets cleaned up. This creates the following limitations: a. There is no way to store resources that are accessible across the individual parameter test executions. b. It's not possible to pass additional context besides the previous parameter to `generate_params()` to get the next parameter. c. Test users are restricted to using pre-defined static arrays of parameter objects or `generate_params()` to define their parameters. There is no flexibility to pass a custom dynamic array without using `generate_params()`, which can be complex if generating the next parameter depends on more than just the single previous parameter (e.g., two or more previous parameters). This patch series resolves these limitations by: 1. [P 1] Giving each parameterized test execution its own `struct kunit`. This aligns more with the definition of a `struct kunit` as a running instance of a test. It will also remove the need to manage state, such as resetting the `test->priv` field or the `test->status_comment` after every parameter run. 2. [P 1] Introducing a parent pointer of type `struct kunit`. Behind the scenes, a parent instance for the parameterized tests will be created. It won't be used to execute any test logic, but will instead be used as a context for shared resources. Each individual running instance of a test will now have a reference to that parent instance and thus, have access to those resources. 3. [P 2] Introducing `param_init()` and `param_exit()` functions that can set up and clean up the parent instance of the parameterized tests. They will run once before and after the parameterized series and provide a way for the user to access the parent instance to add the parameter array or any other resources to it, including custom ones to the `test->parent->priv` field or to `test->parent->resources` via the Resource API (link below). https://elixir.bootlin.com/linux/v6.16-rc7/source/include/kunit/resource.h 4. [P 3, 4 & 5] Passing the parent `struct kunit` as an additional parameter to `generate_params()`. This provides `generate_params()` with more available context, making parameter generation much more flexible. The `generate_params()` implementations in the KCSAN and drm/xe tests have been adapted to match the new function pointer signature. 5. [P 6] Introducing a `params_data` field in `struct kunit`. This will allow the parent instance of a test to have direct storage of the parameter array, enabling features like using dynamic parameter arrays or using context beyond just the previous parameter. Thank you! -Marie Marie Zhussupova (9): kunit: Add parent kunit for parameterized test context kunit: Introduce param_init/exit for parameterized test shared context management kunit: Pass additional context to generate_params for parameterized testing kcsan: test: Update parameter generator to new signature drm/xe: Update parameter generator to new signature kunit: Enable direct registration of parameter arrays to a KUnit test kunit: Add example parameterized test with shared resources and direct static parameter array setup kunit: Add example parameterized test with direct dynamic parameter array setup Documentation: kunit: Document new parameterized test features Documentation/dev-tools/kunit/usage.rst | 455 +++++++++++++++++++++++- drivers/gpu/drm/xe/tests/xe_pci.c | 2 +- include/kunit/test.h | 98 ++++- kernel/kcsan/kcsan_test.c | 2 +- lib/kunit/kunit-example-test.c | 207 +++++++++++ lib/kunit/test.c | 82 ++++- 6 files changed, 818 insertions(+), 28 deletions(-) -- 2.50.1.552.g942d659e1b-goog

1 month

7
40
0 0

[PATCH v2 00/10] rust: use `core::ffi::CStr` method names

by Tamir Duberstein

This is series 2b/5 of the migration to `core::ffi::CStr`[0]. 20250704-core-cstr-prepare-v1-0-a91524037783(a)gmail.com. This series depends on the prior series[0] and is intended to go through the rust tree to reduce the number of release cycles required to complete the work. Subsystem maintainers: I would appreciate your `Acked-by`s so that this can be taken through Miguel's tree (where the other series must go). [0] https://lore.kernel.org/all/20250704-core-cstr-prepare-v1-0-a91524037783@gm… Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v2: - Update patch title (was nova-core, now drm/panic). - Link to v1: https://lore.kernel.org/r/20250709-core-cstr-fanout-1-v1-0-fd793b3e58a2@gma… --- Tamir Duberstein (10): drm/panic: use `core::ffi::CStr` method names rust: auxiliary: use `core::ffi::CStr` method names rust: configfs: use `core::ffi::CStr` method names rust: cpufreq: use `core::ffi::CStr` method names rust: drm: use `core::ffi::CStr` method names rust: firmware: use `core::ffi::CStr` method names rust: kunit: use `core::ffi::CStr` method names rust: miscdevice: use `core::ffi::CStr` method names rust: net: use `core::ffi::CStr` method names rust: of: use `core::ffi::CStr` method names drivers/gpu/drm/drm_panic_qr.rs | 2 +- rust/kernel/auxiliary.rs | 4 ++-- rust/kernel/configfs.rs | 4 ++-- rust/kernel/cpufreq.rs | 2 +- rust/kernel/drm/device.rs | 4 ++-- rust/kernel/firmware.rs | 2 +- rust/kernel/kunit.rs | 6 +++--- rust/kernel/miscdevice.rs | 2 +- rust/kernel/net/phy.rs | 2 +- rust/kernel/of.rs | 2 +- samples/rust/rust_configfs.rs | 2 +- 11 files changed, 16 insertions(+), 16 deletions(-) --- base-commit: cc84ef3b88f407e8bd5a5f7b6906d1e69851c856 change-id: 20250709-core-cstr-fanout-1-f20611832272 prerequisite-change-id: 20250704-core-cstr-prepare-9b9e6a7bd57e:v1 prerequisite-patch-id: 83b1239d1805f206711a5a936bbb61c83227d573 prerequisite-patch-id: a0355dd0efcc945b0565dc4e5a0f42b5a3d29c7e prerequisite-patch-id: 8585bf441cfab705181f5606c63483c2e88d25aa prerequisite-patch-id: 04ec344c0bc23f90dbeac10afe26df1a86ce53ec prerequisite-patch-id: a2fc6cd05fce6d6da8d401e9f8a905bb5c0b2f27 prerequisite-patch-id: f14c099c87562069f25fb7aea6d9aae4086c49a8 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

1 month

4
15
0 0

[PATCH v2 0/8] rust: use `kernel::{fmt,prelude::fmt!}`

by Tamir Duberstein

This is series 2a/5 of the migration to `core::ffi::CStr`[0]. 20250704-core-cstr-prepare-v1-0-a91524037783(a)gmail.com. This series depends on the prior series[0] and is intended to go through the rust tree to reduce the number of release cycles required to complete the work. Subsystem maintainers: I would appreciate your `Acked-by`s so that this can be taken through Miguel's tree (where the other series must go). [0] https://lore.kernel.org/all/20250704-core-cstr-prepare-v1-0-a91524037783@gm… Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v2: - Rebase on rust-next. - Drop pin-init patch, which is no longer needed. - Link to v1: https://lore.kernel.org/r/20250709-core-cstr-fanout-1-v1-0-64308e7203fc@gma… --- Tamir Duberstein (8): gpu: nova-core: use `kernel::{fmt,prelude::fmt!}` rust: alloc: use `kernel::{fmt,prelude::fmt!}` rust: block: use `kernel::{fmt,prelude::fmt!}` rust: device: use `kernel::{fmt,prelude::fmt!}` rust: file: use `kernel::{fmt,prelude::fmt!}` rust: kunit: use `kernel::{fmt,prelude::fmt!}` rust: seq_file: use `kernel::{fmt,prelude::fmt!}` rust: sync: use `kernel::{fmt,prelude::fmt!}` drivers/block/rnull.rs | 2 +- drivers/gpu/nova-core/gpu.rs | 3 +-- drivers/gpu/nova-core/regs/macros.rs | 6 +++--- rust/kernel/alloc/kbox.rs | 2 +- rust/kernel/alloc/kvec.rs | 2 +- rust/kernel/alloc/kvec/errors.rs | 2 +- rust/kernel/block/mq.rs | 2 +- rust/kernel/block/mq/gen_disk.rs | 2 +- rust/kernel/block/mq/raw_writer.rs | 3 +-- rust/kernel/device.rs | 6 +++--- rust/kernel/fs/file.rs | 5 +++-- rust/kernel/kunit.rs | 8 ++++---- rust/kernel/seq_file.rs | 6 +++--- rust/kernel/sync/arc.rs | 2 +- scripts/rustdoc_test_gen.rs | 2 +- 15 files changed, 26 insertions(+), 27 deletions(-) --- base-commit: cc84ef3b88f407e8bd5a5f7b6906d1e69851c856 change-id: 20250709-core-cstr-fanout-1-f20611832272 prerequisite-change-id: 20250704-core-cstr-prepare-9b9e6a7bd57e:v1 prerequisite-patch-id: 83b1239d1805f206711a5a936bbb61c83227d573 prerequisite-patch-id: a0355dd0efcc945b0565dc4e5a0f42b5a3d29c7e prerequisite-patch-id: 8585bf441cfab705181f5606c63483c2e88d25aa prerequisite-patch-id: 04ec344c0bc23f90dbeac10afe26df1a86ce53ec prerequisite-patch-id: a2fc6cd05fce6d6da8d401e9f8a905bb5c0b2f27 prerequisite-patch-id: f14c099c87562069f25fb7aea6d9aae4086c49a8 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

1 month

3
13
0 0

[PATCH v7 00/30] TDX KVM selftests

by Sagi Shahar

This is v7 of the TDX selftests now that the base TDX patches have been accepted. This series is based on v6.16-rc1 No major changes from v6 asside from rebasing. Thanks, Changes from v6: - Rebased on top of v6.16-rc1 Ackerley Tng (12): KVM: selftests: Add function to allow one-to-one GVA to GPA mappings KVM: selftests: Expose function that sets up sregs based on VM's mode KVM: selftests: Store initial stack address in struct kvm_vcpu KVM: selftests: Add vCPU descriptor table initialization utility KVM: selftests: TDX: Use KVM_TDX_CAPABILITIES to validate TDs' attribute configuration KVM: selftests: TDX: Update load_td_memory_region() for VM memory backed by guest memfd KVM: selftests: Add functions to allow mapping as shared KVM: selftests: KVM: selftests: Expose new vm_vaddr_alloc_private() KVM: selftests: TDX: Add support for TDG.MEM.PAGE.ACCEPT KVM: selftests: TDX: Add support for TDG.VP.VEINFO.GET KVM: selftests: TDX: Add TDX UPM selftest KVM: selftests: TDX: Add TDX UPM selftests for implicit conversion Erdem Aktas (3): KVM: selftests: Add helper functions to create TDX VMs KVM: selftests: TDX: Add TDX lifecycle test KVM: selftests: TDX: Add TDX HLT exit test Isaku Yamahata (1): KVM: selftests: Update kvm_init_vm_address_properties() for TDX Roger Wang (1): KVM: selftests: TDX: Add TDG.VP.INFO test Ryan Afranji (2): KVM: selftests: TDX: Verify the behavior when host consumes a TD private memory KVM: selftests: TDX: Add shared memory test Sagi Shahar (10): KVM: selftests: TDX: Add report_fatal_error test KVM: selftests: TDX: Adding test case for TDX port IO KVM: selftests: TDX: Add basic TDX CPUID test KVM: selftests: TDX: Add basic TDG.VP.VMCALL<GetTdVmCallInfo> test KVM: selftests: TDX: Add TDX IO writes test KVM: selftests: TDX: Add TDX IO reads test KVM: selftests: TDX: Add TDX MSR read/write tests KVM: selftests: TDX: Add TDX MMIO reads test KVM: selftests: TDX: Add TDX MMIO writes test KVM: selftests: TDX: Add TDX CPUID TDVMCALL test Yan Zhao (1): KVM: selftests: TDX: Test LOG_DIRTY_PAGES flag to a non-GUEST_MEMFD memslot tools/testing/selftests/kvm/Makefile.kvm | 8 + .../testing/selftests/kvm/include/kvm_util.h | 36 + .../selftests/kvm/include/x86/kvm_util_arch.h | 1 + .../selftests/kvm/include/x86/processor.h | 2 + .../selftests/kvm/include/x86/tdx/td_boot.h | 83 ++ .../kvm/include/x86/tdx/td_boot_asm.h | 16 + .../selftests/kvm/include/x86/tdx/tdcall.h | 54 + .../selftests/kvm/include/x86/tdx/tdx.h | 67 + .../selftests/kvm/include/x86/tdx/tdx_util.h | 23 + .../selftests/kvm/include/x86/tdx/test_util.h | 133 ++ tools/testing/selftests/kvm/lib/kvm_util.c | 74 +- .../testing/selftests/kvm/lib/x86/processor.c | 97 +- .../selftests/kvm/lib/x86/tdx/td_boot.S | 100 ++ .../selftests/kvm/lib/x86/tdx/tdcall.S | 163 +++ tools/testing/selftests/kvm/lib/x86/tdx/tdx.c | 243 ++++ .../selftests/kvm/lib/x86/tdx/tdx_util.c | 643 +++++++++ .../selftests/kvm/lib/x86/tdx/test_util.c | 187 +++ .../selftests/kvm/x86/tdx_shared_mem_test.c | 129 ++ .../testing/selftests/kvm/x86/tdx_upm_test.c | 461 ++++++ tools/testing/selftests/kvm/x86/tdx_vm_test.c | 1254 +++++++++++++++++ 20 files changed, 3734 insertions(+), 40 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/td_boot.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/td_boot_asm.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/tdcall.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/tdx.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/tdx_util.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/test_util.h create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/td_boot.S create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdcall.S create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdx.c create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdx_util.c create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/test_util.c create mode 100644 tools/testing/selftests/kvm/x86/tdx_shared_mem_test.c create mode 100644 tools/testing/selftests/kvm/x86/tdx_upm_test.c create mode 100644 tools/testing/selftests/kvm/x86/tdx_vm_test.c -- 2.50.0.rc2.692.g299adb8693-goog

1 month

2
34
0 0

[PATCH v5] selftests: riscv: add misaligned access testing

by Clément Léger

This selftest tests all the currently emulated instructions (except for the RV32 compressed ones which are left as a future exercise for a RV32 user). For the FPU instructions, all the FPU registers are tested. Signed-off-by: Clément Léger <cleger(a)rivosinc.com> --- This commits needs [1] for the test to be passed or it will fail due to missing sign extension. Note: This test can be executed using an SBI that support FWFT or that delegates misaligned traps by default. If using QEMU, you will need the patches mentioned at [2] so that misaligned accesses will generate a trap. Note: This commit was part of a series [3] that was partially merged. Note: the remaining checkpatch errors are not applicable to this tests which is a userspace one and does not use the kernel headers. Macros with complex values can not be enclosed in do while loop since they are generating functions. Link: https://lore.kernel.org/linux-riscv/mvmikk0goil.fsf@suse.de/ [1] Link: https://lore.kernel.org/all/20241211211933.198792-1-fkonrad@amd.com/ [2] Link: https://lore.kernel.org/linux-riscv/20250422162324.956065-1-cleger@rivosinc… [3] V5: - Sign extend LWU return value - Added sign extensions tests - Tests multiples values for GP load/store V4: - Fixed a typo in test name s/load/store V3: - Fixed a segfault and a sign extension error found when compiling with -O<x>, x != 0 (Alex) - Use inline assembly to generate the sigbus and avoid GCC optimizations V2: - Fix commit description - Fix a few errors reported by checkpatch.pl --- tools/testing/selftests/riscv/Makefile | 2 +- .../selftests/riscv/misaligned/.gitignore | 1 + .../selftests/riscv/misaligned/Makefile | 12 + .../selftests/riscv/misaligned/common.S | 33 ++ .../testing/selftests/riscv/misaligned/fpu.S | 180 +++++++++++ tools/testing/selftests/riscv/misaligned/gp.S | 113 +++++++ .../selftests/riscv/misaligned/misaligned.c | 288 ++++++++++++++++++ 7 files changed, 628 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/riscv/misaligned/.gitignore create mode 100644 tools/testing/selftests/riscv/misaligned/Makefile create mode 100644 tools/testing/selftests/riscv/misaligned/common.S create mode 100644 tools/testing/selftests/riscv/misaligned/fpu.S create mode 100644 tools/testing/selftests/riscv/misaligned/gp.S create mode 100644 tools/testing/selftests/riscv/misaligned/misaligned.c diff --git a/tools/testing/selftests/riscv/Makefile b/tools/testing/selftests/riscv/Makefile index 099b8c1f46f8..95a98ceeb3b3 100644 --- a/tools/testing/selftests/riscv/Makefile +++ b/tools/testing/selftests/riscv/Makefile @@ -5,7 +5,7 @@ ARCH ?= $(shell uname -m 2>/dev/null || echo not) ifneq (,$(filter $(ARCH),riscv)) -RISCV_SUBTARGETS ?= abi hwprobe mm sigreturn vector +RISCV_SUBTARGETS ?= abi hwprobe mm sigreturn vector misaligned else RISCV_SUBTARGETS := endif diff --git a/tools/testing/selftests/riscv/misaligned/.gitignore b/tools/testing/selftests/riscv/misaligned/.gitignore new file mode 100644 index 000000000000..5eff15a1f981 --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/.gitignore @@ -0,0 +1 @@ +misaligned diff --git a/tools/testing/selftests/riscv/misaligned/Makefile b/tools/testing/selftests/riscv/misaligned/Makefile new file mode 100644 index 000000000000..1aa40110c50d --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 ARM Limited +# Originally tools/testing/arm64/abi/Makefile + +CFLAGS += -I$(top_srcdir)/tools/include + +TEST_GEN_PROGS := misaligned + +include ../../lib.mk + +$(OUTPUT)/misaligned: misaligned.c fpu.S gp.S + $(CC) -g3 -static -o$@ -march=rv64imafdc $(CFLAGS) $(LDFLAGS) $^ diff --git a/tools/testing/selftests/riscv/misaligned/common.S b/tools/testing/selftests/riscv/misaligned/common.S new file mode 100644 index 000000000000..8fa00035bd5d --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/common.S @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2025 Rivos Inc. + * + * Authors: + * Clément Léger <cleger(a)rivosinc.com> + */ + +.macro lb_sb temp, offset, src, dst + lb \temp, \offset(\src) + sb \temp, \offset(\dst) +.endm + +.macro copy_long_to temp, src, dst + lb_sb \temp, 0, \src, \dst, + lb_sb \temp, 1, \src, \dst, + lb_sb \temp, 2, \src, \dst, + lb_sb \temp, 3, \src, \dst, + lb_sb \temp, 4, \src, \dst, + lb_sb \temp, 5, \src, \dst, + lb_sb \temp, 6, \src, \dst, + lb_sb \temp, 7, \src, \dst, +.endm + +.macro sp_stack_prologue offset + addi sp, sp, -8 + sub sp, sp, \offset +.endm + +.macro sp_stack_epilogue offset + add sp, sp, \offset + addi sp, sp, 8 +.endm diff --git a/tools/testing/selftests/riscv/misaligned/fpu.S b/tools/testing/selftests/riscv/misaligned/fpu.S new file mode 100644 index 000000000000..a7ad4430a424 --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/fpu.S @@ -0,0 +1,180 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2025 Rivos Inc. + * + * Authors: + * Clément Léger <cleger(a)rivosinc.com> + */ + +#include "common.S" + +#define CASE_ALIGN 4 + +.macro fpu_load_inst fpreg, inst, precision, load_reg +.align CASE_ALIGN + \inst \fpreg, 0(\load_reg) + fmv.\precision fa0, \fpreg + j 2f +.endm + +#define flw(__fpreg) fpu_load_inst __fpreg, flw, s, a4 +#define fld(__fpreg) fpu_load_inst __fpreg, fld, d, a4 +#define c_flw(__fpreg) fpu_load_inst __fpreg, c.flw, s, a4 +#define c_fld(__fpreg) fpu_load_inst __fpreg, c.fld, d, a4 +#define c_fldsp(__fpreg) fpu_load_inst __fpreg, c.fldsp, d, sp + +.macro fpu_store_inst fpreg, inst, precision, store_reg +.align CASE_ALIGN + fmv.\precision \fpreg, fa0 + \inst \fpreg, 0(\store_reg) + j 2f +.endm + +#define fsw(__fpreg) fpu_store_inst __fpreg, fsw, s, a4 +#define fsd(__fpreg) fpu_store_inst __fpreg, fsd, d, a4 +#define c_fsw(__fpreg) fpu_store_inst __fpreg, c.fsw, s, a4 +#define c_fsd(__fpreg) fpu_store_inst __fpreg, c.fsd, d, a4 +#define c_fsdsp(__fpreg) fpu_store_inst __fpreg, c.fsdsp, d, sp + +.macro fp_test_prologue + move a4, a1 + /* + * Compute jump offset to store the correct FP register since we don't + * have indirect FP register access (or at least we don't use this + * extension so that works on all archs) + */ + sll t0, a0, CASE_ALIGN + la t2, 1f + add t0, t0, t2 + jr t0 +.align CASE_ALIGN +1: +.endm + +.macro fp_test_prologue_compressed + /* FP registers for compressed instructions starts from 8 to 16 */ + addi a0, a0, -8 + fp_test_prologue +.endm + +#define fp_test_body_compressed(__inst_func) \ + __inst_func(f8); \ + __inst_func(f9); \ + __inst_func(f10); \ + __inst_func(f11); \ + __inst_func(f12); \ + __inst_func(f13); \ + __inst_func(f14); \ + __inst_func(f15); \ +2: + +#define fp_test_body(__inst_func) \ + __inst_func(f0); \ + __inst_func(f1); \ + __inst_func(f2); \ + __inst_func(f3); \ + __inst_func(f4); \ + __inst_func(f5); \ + __inst_func(f6); \ + __inst_func(f7); \ + __inst_func(f8); \ + __inst_func(f9); \ + __inst_func(f10); \ + __inst_func(f11); \ + __inst_func(f12); \ + __inst_func(f13); \ + __inst_func(f14); \ + __inst_func(f15); \ + __inst_func(f16); \ + __inst_func(f17); \ + __inst_func(f18); \ + __inst_func(f19); \ + __inst_func(f20); \ + __inst_func(f21); \ + __inst_func(f22); \ + __inst_func(f23); \ + __inst_func(f24); \ + __inst_func(f25); \ + __inst_func(f26); \ + __inst_func(f27); \ + __inst_func(f28); \ + __inst_func(f29); \ + __inst_func(f30); \ + __inst_func(f31); \ +2: +.text + +#define __gen_test_inst(__inst, __suffix) \ +.global test_ ## __inst; \ +test_ ## __inst:; \ + fp_test_prologue ## __suffix; \ + fp_test_body ## __suffix(__inst); \ + ret + +#define gen_test_inst_compressed(__inst) \ + .option arch,+c; \ + __gen_test_inst(c_ ## __inst, _compressed) + +#define gen_test_inst(__inst) \ + .balign 16; \ + .option push; \ + .option arch,-c; \ + __gen_test_inst(__inst, ); \ + .option pop + +.macro fp_test_prologue_load_compressed_sp + copy_long_to t0, a1, sp +.endm + +.macro fp_test_epilogue_load_compressed_sp +.endm + +.macro fp_test_prologue_store_compressed_sp +.endm + +.macro fp_test_epilogue_store_compressed_sp + copy_long_to t0, sp, a1 +.endm + +#define gen_inst_compressed_sp(__inst, __type) \ + .global test_c_ ## __inst ## sp; \ + test_c_ ## __inst ## sp:; \ + sp_stack_prologue a2; \ + fp_test_prologue_## __type ## _compressed_sp; \ + fp_test_prologue_compressed; \ + fp_test_body_compressed(c_ ## __inst ## sp); \ + fp_test_epilogue_## __type ## _compressed_sp; \ + sp_stack_epilogue a2; \ + ret + +#define gen_test_load_compressed_sp(__inst) gen_inst_compressed_sp(__inst, load) +#define gen_test_store_compressed_sp(__inst) gen_inst_compressed_sp(__inst, store) + +/* + * float_fsw_reg - Set a FP register from a register containing the value + * a0 = FP register index to be set + * a1 = addr where to store register value + * a2 = address offset + * a3 = value to be store + */ +gen_test_inst(fsw) + +/* + * float_flw_reg - Get a FP register value and return it + * a0 = FP register index to be retrieved + * a1 = addr to load register from + * a2 = address offset + */ +gen_test_inst(flw) + +gen_test_inst(fsd) +#ifdef __riscv_compressed +gen_test_inst_compressed(fsd) +gen_test_store_compressed_sp(fsd) +#endif + +gen_test_inst(fld) +#ifdef __riscv_compressed +gen_test_inst_compressed(fld) +gen_test_load_compressed_sp(fld) +#endif diff --git a/tools/testing/selftests/riscv/misaligned/gp.S b/tools/testing/selftests/riscv/misaligned/gp.S new file mode 100644 index 000000000000..5abec5ccc828 --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/gp.S @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2025 Rivos Inc. + * + * Authors: + * Clément Léger <cleger(a)rivosinc.com> + */ + +#include "common.S" + +.text + +.macro __gen_test_inst inst, src_reg + \inst a2, 0(\src_reg) + move a0, a2 +.endm + +.macro gen_func_header func_name, rvc + .option arch,\rvc + .global test_\func_name + test_\func_name: +.endm + +.macro gen_test_inst inst + .option push + gen_func_header \inst, -c + __gen_test_inst \inst, a0 + .option pop + ret +.endm + +.macro gen_test_lwu + .option push + gen_func_header lwu, -c + __gen_test_inst lwu, a0 + .option pop + # RISC-V ABI states that C expect a sign extended 32 bits integer + sext.w a0, a0 + ret +.endm + +.macro __gen_test_inst_c name, src_reg + .option push + gen_func_header c_\name, +c + __gen_test_inst c.\name, \src_reg + .option pop + ret +.endm + +.macro gen_test_inst_c name + __gen_test_inst_c \name, a0 +.endm + + +.macro gen_test_inst_c_ldsp + .option push + gen_func_header c_ldsp, +c + sp_stack_prologue a1 + copy_long_to t0, a0, sp + c.ldsp a0, 0(sp) + sp_stack_epilogue a1 + .option pop + ret +.endm + +.macro lb_sp_sb_a0 reg, offset + lb_sb \reg, \offset, sp, a0 +.endm + +.macro gen_test_inst_c_sdsp + .option push + gen_func_header c_sdsp, +c + /* Misalign stack pointer */ + sp_stack_prologue a1 + /* Misalign access */ + c.sdsp a2, 0(sp) + copy_long_to t0, sp, a0 + sp_stack_epilogue a1 + .option pop + ret +.endm + + + /* + * a0 = addr to load from + * a1 = address offset + * a2 = value to be loaded + */ +gen_test_inst lh +gen_test_inst lhu +gen_test_inst lw +gen_test_lwu +gen_test_inst ld +#ifdef __riscv_compressed +gen_test_inst_c lw +gen_test_inst_c ld +gen_test_inst_c_ldsp +#endif + +/* + * a0 = addr where to store value + * a1 = address offset + * a2 = value to be stored + */ +gen_test_inst sh +gen_test_inst sw +gen_test_inst sd +#ifdef __riscv_compressed +gen_test_inst_c sw +gen_test_inst_c sd +gen_test_inst_c_sdsp +#endif + diff --git a/tools/testing/selftests/riscv/misaligned/misaligned.c b/tools/testing/selftests/riscv/misaligned/misaligned.c new file mode 100644 index 000000000000..57ddcbdc947c --- /dev/null +++ b/tools/testing/selftests/riscv/misaligned/misaligned.c @@ -0,0 +1,288 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2025 Rivos Inc. + * + * Authors: + * Clément Léger <cleger(a)rivosinc.com> + */ +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <linux/ptrace.h> +#include "../../kselftest_harness.h" + +#include <stdlib.h> +#include <stdio.h> +#include <stdint.h> +#include <float.h> +#include <errno.h> +#include <math.h> +#include <string.h> +#include <signal.h> +#include <stdbool.h> +#include <unistd.h> +#include <inttypes.h> +#include <ucontext.h> + +#include <sys/prctl.h> + +#define stringify(s) __stringify(s) +#define __stringify(s) #s + +#define U8_MAX ((u8)~0U) +#define S8_MAX ((s8)(U8_MAX >> 1)) +#define S8_MIN ((s8)(-S8_MAX - 1)) +#define U16_MAX ((u16)~0U) +#define S16_MAX ((s16)(U16_MAX >> 1)) +#define S16_MIN ((s16)(-S16_MAX - 1)) +#define U32_MAX ((u32)~0U) +#define U32_MIN ((u32)0) +#define S32_MAX ((s32)(U32_MAX >> 1)) +#define S32_MIN ((s32)(-S32_MAX - 1)) +#define U64_MAX ((u64)~0ULL) +#define S64_MAX ((s64)(U64_MAX >> 1)) +#define S64_MIN ((s64)(-S64_MAX - 1)) + +#define int16_TEST_VALUES {S16_MIN, S16_MIN/2, -1, 1, S16_MAX/2, S16_MAX} +#define int32_TEST_VALUES {S32_MIN, S32_MIN/2, -1, 1, S32_MAX/2, S32_MAX} +#define int64_TEST_VALUES {S64_MIN, S64_MIN/2, -1, 1, S64_MAX/2, S64_MAX} +#define uint16_TEST_VALUES {0, U16_MAX/2, U16_MAX} +#define uint32_TEST_VALUES {0, U32_MAX/2, U32_MAX} + +#define float_TEST_VALUES {FLT_MIN, FLT_MIN/2, FLT_MAX/2, FLT_MAX} +#define double_TEST_VALUES {DBL_MIN, DBL_MIN/2, DBL_MAX/2, DBL_MAX} + +static bool float_equal(float a, float b) +{ + float scaled_epsilon; + float difference = fabsf(a - b); + + // Scale to the largest value. + a = fabsf(a); + b = fabsf(b); + if (a > b) + scaled_epsilon = FLT_EPSILON * a; + else + scaled_epsilon = FLT_EPSILON * b; + + return difference <= scaled_epsilon; +} + +static bool double_equal(double a, double b) +{ + double scaled_epsilon; + double difference = fabsl(a - b); + + // Scale to the largest value. + a = fabs(a); + b = fabs(b); + if (a > b) + scaled_epsilon = DBL_EPSILON * a; + else + scaled_epsilon = DBL_EPSILON * b; + + return difference <= scaled_epsilon; +} + +#define fpu_load_proto(__inst, __type) \ +extern __type test_ ## __inst(unsigned long fp_reg, void *addr, unsigned long offset, __type value) + +fpu_load_proto(flw, float); +fpu_load_proto(fld, double); +fpu_load_proto(c_flw, float); +fpu_load_proto(c_fld, double); +fpu_load_proto(c_fldsp, double); + +#define fpu_store_proto(__inst, __type) \ +extern void test_ ## __inst(unsigned long fp_reg, void *addr, unsigned long offset, __type value) + +fpu_store_proto(fsw, float); +fpu_store_proto(fsd, double); +fpu_store_proto(c_fsw, float); +fpu_store_proto(c_fsd, double); +fpu_store_proto(c_fsdsp, double); + +#define gp_load_proto(__inst, __type) \ +extern __type test_ ## __inst(void *addr, unsigned long offset, __type value) + +gp_load_proto(lh, int16_t); +gp_load_proto(lhu, uint16_t); +gp_load_proto(lw, int32_t); +gp_load_proto(lwu, uint32_t); +gp_load_proto(ld, int64_t); +gp_load_proto(c_lw, int32_t); +gp_load_proto(c_ld, int64_t); +gp_load_proto(c_ldsp, int64_t); + +#define gp_store_proto(__inst, __type) \ +extern void test_ ## __inst(void *addr, unsigned long offset, __type value) + +gp_store_proto(sh, int16_t); +gp_store_proto(sw, int32_t); +gp_store_proto(sd, int64_t); +gp_store_proto(c_sw, int32_t); +gp_store_proto(c_sd, int64_t); +gp_store_proto(c_sdsp, int64_t); + +#define TEST_GP_LOAD(__inst, __type_size, __type) \ +TEST(gp_load_ ## __inst) \ +{ \ + int offset, ret, val_i; \ + uint8_t buf[16] __attribute__((aligned(16))); \ + __type ## __type_size ## _t test_val[] = __type ## __type_size ## _TEST_VALUES; \ + \ + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_NOPRINT); \ + ASSERT_EQ(ret, 0); \ + \ + for (offset = 1; offset < (__type_size) / 8; offset++) { \ + for (val_i = 0; val_i < ARRAY_SIZE(test_val); val_i++) { \ + __type ## __type_size ## _t ref_val = test_val[val_i]; \ + __type ## __type_size ## _t *ptr = \ + (__type ## __type_size ## _t *)(buf + offset); \ + memcpy(ptr, &ref_val, sizeof(ref_val)); \ + __type ## __type_size ## _t val = \ + test_ ## __inst(ptr, offset, ref_val); \ + EXPECT_EQ(ref_val, val); \ + } \ + } \ +} + +TEST_GP_LOAD(lh, 16, int) +TEST_GP_LOAD(lhu, 16, uint) +TEST_GP_LOAD(lw, 32, int) +TEST_GP_LOAD(lwu, 32, uint) +TEST_GP_LOAD(ld, 64, int) +#ifdef __riscv_compressed +TEST_GP_LOAD(c_lw, 32, int) +TEST_GP_LOAD(c_ld, 64, int) +TEST_GP_LOAD(c_ldsp, 64, int) +#endif + +#define TEST_GP_STORE(__inst, __type_size, __type) \ +TEST(gp_store_ ## __inst) \ +{ \ + int offset, ret, val_i; \ + uint8_t buf[16] __attribute__((aligned(16))); \ + __type ## __type_size ## _t test_val[] = \ + __type ## __type_size ## _TEST_VALUES; \ + \ + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_NOPRINT); \ + ASSERT_EQ(ret, 0); \ + \ + for (val_i = 0; val_i < ARRAY_SIZE(test_val); val_i++) { \ + __type ## __type_size ## _t ref_val = test_val[val_i]; \ + for (offset = 1; offset < (__type_size) / 8; offset++) { \ + __type ## __type_size ## _t val = ref_val; \ + __type ## __type_size ## _t *ptr = \ + (__type ## __type_size ## _t *)(buf + offset); \ + memset(ptr, 0, sizeof(val)); \ + test_ ## __inst(ptr, offset, val); \ + memcpy(&val, ptr, sizeof(val)); \ + EXPECT_EQ(ref_val, val); \ + } \ + } \ +} + +TEST_GP_STORE(sh, 16, int) +TEST_GP_STORE(sw, 32, int) +TEST_GP_STORE(sd, 64, int) +#ifdef __riscv_compressed +TEST_GP_STORE(c_sw, 32, int) +TEST_GP_STORE(c_sd, 64, int) +TEST_GP_STORE(c_sdsp, 64, int) +#endif + +#define __TEST_FPU_LOAD(__type, __inst, __reg_start, __reg_end) \ +TEST(fpu_load_ ## __inst) \ +{ \ + int ret, offset, fp_reg, val_i; \ + uint8_t buf[16] __attribute__((aligned(16))); \ + __type test_val[] = __type ## _TEST_VALUES; \ + \ + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_NOPRINT); \ + ASSERT_EQ(ret, 0); \ + \ + for (fp_reg = __reg_start; fp_reg < __reg_end; fp_reg++) { \ + for (offset = 1; offset < 4; offset++) { \ + for (val_i = 0; val_i < ARRAY_SIZE(test_val); val_i++) { \ + __type val, ref_val = test_val[val_i]; \ + void *load_addr = (buf + offset); \ + \ + memcpy(load_addr, &ref_val, sizeof(ref_val)); \ + val = test_ ## __inst(fp_reg, load_addr, offset, ref_val); \ + EXPECT_TRUE(__type ##_equal(val, ref_val)); \ + } \ + } \ + } \ +} + +#define TEST_FPU_LOAD(__type, __inst) \ + __TEST_FPU_LOAD(__type, __inst, 0, 32) +#define TEST_FPU_LOAD_COMPRESSED(__type, __inst) \ + __TEST_FPU_LOAD(__type, __inst, 8, 16) + +TEST_FPU_LOAD(float, flw) +TEST_FPU_LOAD(double, fld) +#ifdef __riscv_compressed +TEST_FPU_LOAD_COMPRESSED(double, c_fld) +TEST_FPU_LOAD_COMPRESSED(double, c_fldsp) +#endif + +#define __TEST_FPU_STORE(__type, __inst, __reg_start, __reg_end) \ +TEST(fpu_store_ ## __inst) \ +{ \ + int ret, offset, fp_reg, val_i; \ + uint8_t buf[16] __attribute__((aligned(16))); \ + __type test_val[] = __type ## _TEST_VALUES; \ + \ + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_NOPRINT); \ + ASSERT_EQ(ret, 0); \ + \ + for (fp_reg = __reg_start; fp_reg < __reg_end; fp_reg++) { \ + for (offset = 1; offset < 4; offset++) { \ + for (val_i = 0; val_i < ARRAY_SIZE(test_val); val_i++) { \ + __type val, ref_val = test_val[val_i]; \ + \ + void *store_addr = (buf + offset); \ + \ + test_ ## __inst(fp_reg, store_addr, offset, ref_val); \ + memcpy(&val, store_addr, sizeof(val)); \ + EXPECT_TRUE(__type ## _equal(val, ref_val)); \ + } \ + } \ + } \ +} +#define TEST_FPU_STORE(__type, __inst) \ + __TEST_FPU_STORE(__type, __inst, 0, 32) +#define TEST_FPU_STORE_COMPRESSED(__type, __inst) \ + __TEST_FPU_STORE(__type, __inst, 8, 16) + +TEST_FPU_STORE(float, fsw) +TEST_FPU_STORE(double, fsd) +#ifdef __riscv_compressed +TEST_FPU_STORE_COMPRESSED(double, c_fsd) +TEST_FPU_STORE_COMPRESSED(double, c_fsdsp) +#endif + +TEST_SIGNAL(gen_sigbus, SIGBUS) +{ + uint32_t val = 0xDEADBEEF; + uint8_t buf[16] __attribute__((aligned(16))); + int ret; + + ret = prctl(PR_SET_UNALIGN, PR_UNALIGN_SIGBUS); + ASSERT_EQ(ret, 0); + + asm volatile("sw %0, 1(%1)" : : "r"(val), "r"(buf) : "memory"); +} + +int main(int argc, char **argv) +{ + int ret, val; + + ret = prctl(PR_GET_UNALIGN, &val); + if (ret == -1 && errno == EINVAL) + ksft_exit_skip("SKIP GET_UNALIGN_CTL not supported\n"); + + exit(test_harness_run(argc, argv)); +} -- 2.43.0

1 month

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror July 2025