September 2025 - Linux-kselftest-mirror

[PATCH net 0/3] mptcp: misc fixes for v6.17-rc6

by Matthieu Baerts (NGI0)

Here are various unrelated fixes: - Patch 1: Fix a wrong attribute type in the MPTCP Netlink specs. A fix for v6.7. - Patch 2: Avoid mentioning a deprecated MPTCP sysctl knob in the doc. A fix for v6.15. - Patch 3: Handle new warnings from ShellCheck v0.11.0. This prevents some warnings reported by some CIs. If it is not a good material for 'net', please drop it and I can resend it later, targeting 'net-next'. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Matthieu Baerts (NGI0) (3): netlink: specs: mptcp: fix if-idx attribute type doc: mptcp: net.mptcp.pm_type is deprecated selftests: mptcp: shellcheck: support v0.11.0 Documentation/netlink/specs/mptcp_pm.yaml | 2 +- Documentation/networking/mptcp.rst | 8 ++++---- tools/testing/selftests/net/mptcp/diag.sh | 2 +- tools/testing/selftests/net/mptcp/mptcp_connect.sh | 2 +- tools/testing/selftests/net/mptcp/mptcp_join.sh | 2 +- tools/testing/selftests/net/mptcp/mptcp_sockopt.sh | 2 +- tools/testing/selftests/net/mptcp/pm_netlink.sh | 5 +++-- tools/testing/selftests/net/mptcp/simult_flows.sh | 2 +- tools/testing/selftests/net/mptcp/userspace_pm.sh | 2 +- 9 files changed, 14 insertions(+), 13 deletions(-) --- base-commit: e2a10daba84968f6b5777d150985fd7d6abc9c84 change-id: 20250908-net-mptcp-misc-fixes-6-17-rc5-7550f5f90b66 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

2 weeks, 5 days

6
10
0 0

[PATCH 0/7] KVM: x86: Improve the handling of debug exceptions during instruction emulation

by Hou Wenlong

During my testing, I found that guest debugging with 'DR6.BD' does not work in instruction emulation, as the current code only considers the guest's DR7. Upon reviewing the code, I also observed that the checks for the userspace guest debugging feature and the guest's own debugging feature are repeated in different places during instruction emulation, but the overall logic is the same. If guest debugging is enabled, it needs to exit to userspace; otherwise, a #DB exception needs to be injected into the guest. Therefore, as suggested by Jiangshan Lai, some cleanup has been done for #DB handling in instruction emulation in this patchset. A new function named 'kvm_inject_emulated_db()' is introduced to consolidate all the checking logic. Moreover, I hope we can make the #DB interception path use the same function as well. Additionally, when I looked into the single-step #DB handling in instruction emulation, I noticed that the interrupt shadow is toggled, but it is not considered in the single-step #DB injection. This oversight causes VM entry to fail on VMX (due to pending debug exceptions checking) or breaks the 'MOV SS' suppressed #DB. For the latter, I have kept the behavior for now in my patchset, as I need some suggestions. Hou Wenlong (7): KVM: x86: Set guest DR6 by kvm_queue_exception_p() in instruction emulation KVM: x86: Check guest debug in DR access instruction emulation KVM: x86: Only check effective code breakpoint in emulation KVM: x86: Consolidate KVM_GUESTDBG_SINGLESTEP check into the kvm_inject_emulated_db() KVM: VMX: Set 'BS' bit in pending debug exceptions during instruction emulation KVM: selftests: Verify guest debug DR7.GD checking during instruction emulation KVM: selftests: Verify 'BS' bit checking in pending debug exception during VM entry arch/x86/include/asm/kvm-x86-ops.h | 1 + arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/emulate.c | 14 +-- arch/x86/kvm/kvm_emulate.h | 7 +- arch/x86/kvm/vmx/main.c | 9 ++ arch/x86/kvm/vmx/vmx.c | 14 ++- arch/x86/kvm/vmx/x86_ops.h | 1 + arch/x86/kvm/x86.c | 109 +++++++++++------- arch/x86/kvm/x86.h | 7 ++ .../selftests/kvm/include/x86/processor.h | 3 +- tools/testing/selftests/kvm/x86/debug_regs.c | 64 +++++++++- 11 files changed, 167 insertions(+), 63 deletions(-) base-commit: ecbcc2461839e848970468b44db32282e5059925 -- 2.31.1

2 weeks, 6 days

1
2
0 0

[PATCH net-next v2] selftests: net: replace sleeps in fcnal-test with waits

by Jakub Kicinski

fcnal-test.sh already includes lib.sh, use relevant helpers instead of sleeping. The first chunk is replacing sleep after killing background commands. All remaining ones replace sleep after starting nettest as a server with wait_local_port_listen. Reviewed-by: David Ahern <dsahern(a)kernel.org> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- v2: no changes, previous posting had a trivial Makefile conflict v1: https://lore.kernel.org/20250907012116.3315344-1-kuba@kernel.org --- tools/testing/selftests/net/fcnal-test.sh | 430 +++++++++++----------- 1 file changed, 215 insertions(+), 215 deletions(-) diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 4fcc38907e48..0e3304d37fd0 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -189,7 +189,7 @@ show_hint() kill_procs() { killall nettest ping ping6 >/dev/null 2>&1 - sleep 1 + slowwait 2 sh -c 'test -z "$(pgrep '"'^(nettest|ping|ping6)$'"')"' } set_ping_group() @@ -875,7 +875,7 @@ ipv4_tcp_md5_novrf() # basic use case log_start run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: Single address config" @@ -883,7 +883,7 @@ ipv4_tcp_md5_novrf() log_start show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: Server no config, client uses password" @@ -891,7 +891,7 @@ ipv4_tcp_md5_novrf() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: Client uses wrong password" @@ -899,7 +899,7 @@ ipv4_tcp_md5_novrf() log_start show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -s -M ${MD5_PW} -m ${NSB_LO_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: Client address does not match address configured with password" @@ -910,7 +910,7 @@ ipv4_tcp_md5_novrf() # client in prefix log_start run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: Prefix config" @@ -918,7 +918,7 @@ ipv4_tcp_md5_novrf() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: Prefix config, client uses wrong password" @@ -926,7 +926,7 @@ ipv4_tcp_md5_novrf() log_start show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -c ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: Prefix config, client address not in configured prefix" } @@ -943,7 +943,7 @@ ipv4_tcp_md5() # basic use case log_start run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config" @@ -951,7 +951,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since server does not have MD5 auth" run_cmd nettest -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Server no config, client uses password" @@ -959,7 +959,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Client uses wrong password" @@ -967,7 +967,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since server config differs from client" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Client address does not match address configured with password" @@ -978,7 +978,7 @@ ipv4_tcp_md5() # client in prefix log_start run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config" @@ -986,7 +986,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password" @@ -994,7 +994,7 @@ ipv4_tcp_md5() log_start show_hint "Should timeout since client address is outside of prefix" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -c ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix" @@ -1005,14 +1005,14 @@ ipv4_tcp_md5() log_start run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF" log_start run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF" @@ -1020,7 +1020,7 @@ ipv4_tcp_md5() show_hint "Should timeout since client in default VRF uses VRF password" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw" @@ -1028,21 +1028,21 @@ ipv4_tcp_md5() show_hint "Should timeout since client in VRF uses default VRF password" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw" log_start run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF" log_start run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF" @@ -1050,7 +1050,7 @@ ipv4_tcp_md5() show_hint "Should timeout since client in default VRF uses VRF password" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw" @@ -1058,7 +1058,7 @@ ipv4_tcp_md5() show_hint "Should timeout since client in VRF uses default VRF password" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} & run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw" @@ -1082,14 +1082,14 @@ test_ipv4_md5_vrf__vrf_server__no_bind_ifindex() log_start show_hint "Simulates applications using VRF without TCP_MD5SIG_FLAG_IFINDEX" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} --no-bind-key-ifindex & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: VRF-bound server, unbound key accepts connection" log_start show_hint "Binding both the socket and the key is not required but it works" run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} --force-bind-key-ifindex & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: VRF-bound server, bound key accepts connection" } @@ -1103,25 +1103,25 @@ test_ipv4_md5_vrf__global_server__bind_ifindex0() log_start run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --force-bind-key-ifindex & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Global server, Key bound to ifindex=0 rejects VRF connection" log_start run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --force-bind-key-ifindex & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Global server, key bound to ifindex=0 accepts non-VRF connection" log_start run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --no-bind-key-ifindex & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Global server, key not bound to ifindex accepts VRF connection" log_start run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} --no-bind-key-ifindex & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Global server, key not bound to ifindex accepts non-VRF connection" @@ -1193,7 +1193,7 @@ ipv4_tcp_novrf() do log_start run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Global server" done @@ -1201,7 +1201,7 @@ ipv4_tcp_novrf() a=${NSA_IP} log_start run_cmd nettest -s -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Device server" @@ -1221,13 +1221,13 @@ ipv4_tcp_novrf() do log_start run_cmd_nsb nettest -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -r ${a} -0 ${NSA_IP} log_test_addr ${a} $? 0 "Client" log_start run_cmd_nsb nettest -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 0 "Client, device bind" @@ -1249,7 +1249,7 @@ ipv4_tcp_novrf() do log_start run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -0 ${a} -1 ${a} log_test_addr ${a} $? 0 "Global server, local connection" done @@ -1257,7 +1257,7 @@ ipv4_tcp_novrf() a=${NSA_IP} log_start run_cmd nettest -s -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, unbound client, local connection" @@ -1266,7 +1266,7 @@ ipv4_tcp_novrf() log_start show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope" run_cmd nettest -s -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} log_test_addr ${a} $? 1 "Device server, unbound client, local connection" done @@ -1274,7 +1274,7 @@ ipv4_tcp_novrf() a=${NSA_IP} log_start run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -0 ${a} -d ${NSA_DEV} log_test_addr ${a} $? 0 "Global server, device client, local connection" @@ -1283,7 +1283,7 @@ ipv4_tcp_novrf() log_start show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 1 "Global server, device client, local connection" done @@ -1291,7 +1291,7 @@ ipv4_tcp_novrf() a=${NSA_IP} log_start run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -d ${NSA_DEV} -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local connection" @@ -1323,19 +1323,19 @@ ipv4_tcp_vrf() log_start show_hint "Should fail 'Connection refused' since global server with VRF is disabled" run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 1 "Global server" log_start run_cmd nettest -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "VRF server" log_start run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Device server" @@ -1352,7 +1352,7 @@ ipv4_tcp_vrf() log_start show_hint "Should fail 'Connection refused' since global server with VRF is disabled" run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 1 "Global server, local connection" @@ -1374,14 +1374,14 @@ ipv4_tcp_vrf() log_start show_hint "client socket should be bound to VRF" run_cmd nettest -s -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Global server" log_start show_hint "client socket should be bound to VRF" run_cmd nettest -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "VRF server" @@ -1396,7 +1396,7 @@ ipv4_tcp_vrf() log_start show_hint "client socket should be bound to device" run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 0 "Device server" @@ -1406,7 +1406,7 @@ ipv4_tcp_vrf() log_start show_hint "Should fail 'Connection refused' since client is not bound to VRF" run_cmd nettest -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} log_test_addr ${a} $? 1 "Global server, local connection" done @@ -1418,13 +1418,13 @@ ipv4_tcp_vrf() do log_start run_cmd_nsb nettest -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -r ${a} -d ${VRF} log_test_addr ${a} $? 0 "Client, VRF bind" log_start run_cmd_nsb nettest -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 0 "Client, device bind" @@ -1443,7 +1443,7 @@ ipv4_tcp_vrf() do log_start run_cmd nettest -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -d ${VRF} -0 ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local connection" done @@ -1451,26 +1451,26 @@ ipv4_tcp_vrf() a=${NSA_IP} log_start run_cmd nettest -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "VRF server, device client, local connection" log_start show_hint "Should fail 'No route to host' since client is out of VRF scope" run_cmd nettest -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} log_test_addr ${a} $? 1 "VRF server, unbound client, local connection" log_start run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -d ${VRF} -0 ${a} log_test_addr ${a} $? 0 "Device server, VRF client, local connection" log_start run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local connection" } @@ -1509,7 +1509,7 @@ ipv4_udp_novrf() do log_start run_cmd nettest -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Global server" @@ -1522,7 +1522,7 @@ ipv4_udp_novrf() a=${NSA_IP} log_start run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Device server" @@ -1533,31 +1533,31 @@ ipv4_udp_novrf() do log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -D -r ${a} -0 ${NSA_IP} log_test_addr ${a} $? 0 "Client" log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP} log_test_addr ${a} $? 0 "Client, device bind" log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP} log_test_addr ${a} $? 0 "Client, device send via cmsg" log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP} log_test_addr ${a} $? 0 "Client, device bind via IP_UNICAST_IF" log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP} -U log_test_addr ${a} $? 0 "Client, device bind via IP_UNICAST_IF, with connect()" @@ -1580,7 +1580,7 @@ ipv4_udp_novrf() do log_start run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} -0 ${a} -1 ${a} log_test_addr ${a} $? 0 "Global server, local connection" done @@ -1588,7 +1588,7 @@ ipv4_udp_novrf() a=${NSA_IP} log_start run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} log_test_addr ${a} $? 0 "Device server, unbound client, local connection" @@ -1597,7 +1597,7 @@ ipv4_udp_novrf() log_start show_hint "Should fail 'Connection refused' since address is out of device scope" run_cmd nettest -s -D -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} log_test_addr ${a} $? 1 "Device server, unbound client, local connection" done @@ -1605,25 +1605,25 @@ ipv4_udp_novrf() a=${NSA_IP} log_start run_cmd nettest -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Global server, device client, local connection" log_start run_cmd nettest -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -C -r ${a} log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection" log_start run_cmd nettest -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -S -r ${a} log_test_addr ${a} $? 0 "Global server, device client via IP_UNICAST_IF, local connection" log_start run_cmd nettest -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -S -r ${a} -U log_test_addr ${a} $? 0 "Global server, device client via IP_UNICAST_IF, local connection, with connect()" @@ -1636,28 +1636,28 @@ ipv4_udp_novrf() log_start show_hint "Should fail since addresses on loopback are out of device scope" run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 2 "Global server, device client, local connection" log_start show_hint "Should fail since addresses on loopback are out of device scope" run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection" log_start show_hint "Should fail since addresses on loopback are out of device scope" run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection" log_start show_hint "Should fail since addresses on loopback are out of device scope" run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -U log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection, with connect()" @@ -1667,7 +1667,7 @@ ipv4_udp_novrf() a=${NSA_IP} log_start run_cmd nettest -D -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local conn" @@ -1709,19 +1709,19 @@ ipv4_udp_vrf() log_start show_hint "Fails because ingress is in a VRF and global server is disabled" run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 1 "Global server" log_start run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "VRF server" log_start run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Enslaved device server" @@ -1733,7 +1733,7 @@ ipv4_udp_vrf() log_start show_hint "Should fail 'Connection refused' since global server is out of scope" run_cmd nettest -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 1 "Global server, VRF client, local connection" done @@ -1741,26 +1741,26 @@ ipv4_udp_vrf() a=${NSA_IP} log_start run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" log_start run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "VRF server, enslaved device client, local connection" a=${NSA_IP} log_start run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn" log_start run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn" @@ -1775,19 +1775,19 @@ ipv4_udp_vrf() do log_start run_cmd nettest -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Global server" log_start run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "VRF server" log_start run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -D -r ${a} log_test_addr ${a} $? 0 "Enslaved device server" @@ -1802,13 +1802,13 @@ ipv4_udp_vrf() # log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -d ${VRF} -D -r ${NSB_IP} -1 ${NSA_IP} log_test $? 0 "VRF client" log_start run_cmd_nsb nettest -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -d ${NSA_DEV} -D -r ${NSB_IP} -1 ${NSA_IP} log_test $? 0 "Enslaved device client" @@ -1829,31 +1829,31 @@ ipv4_udp_vrf() a=${NSA_IP} log_start run_cmd nettest -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Global server, VRF client, local conn" log_start run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" log_start run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "VRF server, device client, local conn" log_start run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn" log_start run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn" @@ -1861,7 +1861,7 @@ ipv4_udp_vrf() do log_start run_cmd nettest -D -s -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Global server, VRF client, local conn" done @@ -1870,7 +1870,7 @@ ipv4_udp_vrf() do log_start run_cmd nettest -s -D -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" done @@ -2093,7 +2093,7 @@ ipv4_rt() do log_start run_cmd nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2107,7 +2107,7 @@ ipv4_rt() do log_start run_cmd nettest ${varg} -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2120,7 +2120,7 @@ ipv4_rt() a=${NSA_IP} log_start run_cmd nettest ${varg} -s -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2134,7 +2134,7 @@ ipv4_rt() # log_start run_cmd_nsb nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest ${varg} -d ${VRF} -r ${NSB_IP} & sleep 3 run_cmd ip link del ${VRF} @@ -2145,7 +2145,7 @@ ipv4_rt() log_start run_cmd_nsb nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${NSB_IP} & sleep 3 run_cmd ip link del ${VRF} @@ -2161,7 +2161,7 @@ ipv4_rt() do log_start run_cmd nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${VRF} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2175,7 +2175,7 @@ ipv4_rt() do log_start run_cmd nettest ${varg} -I ${VRF} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${VRF} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2189,7 +2189,7 @@ ipv4_rt() log_start run_cmd nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2200,7 +2200,7 @@ ipv4_rt() log_start run_cmd nettest ${varg} -I ${VRF} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2211,7 +2211,7 @@ ipv4_rt() log_start run_cmd nettest ${varg} -I ${NSA_DEV} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -2561,7 +2561,7 @@ ipv6_tcp_md5_novrf() # basic use case log_start run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: Single address config" @@ -2569,7 +2569,7 @@ ipv6_tcp_md5_novrf() log_start show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: Server no config, client uses password" @@ -2577,7 +2577,7 @@ ipv6_tcp_md5_novrf() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: Client uses wrong password" @@ -2585,7 +2585,7 @@ ipv6_tcp_md5_novrf() log_start show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_LO_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: Client address does not match address configured with password" @@ -2596,7 +2596,7 @@ ipv6_tcp_md5_novrf() # client in prefix log_start run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: Prefix config" @@ -2604,7 +2604,7 @@ ipv6_tcp_md5_novrf() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: Prefix config, client uses wrong password" @@ -2612,7 +2612,7 @@ ipv6_tcp_md5_novrf() log_start show_hint "Should timeout due to MD5 mismatch" run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -c ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: Prefix config, client address not in configured prefix" } @@ -2629,7 +2629,7 @@ ipv6_tcp_md5() # basic use case log_start run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config" @@ -2637,7 +2637,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since server does not have MD5 auth" run_cmd nettest -6 -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Server no config, client uses password" @@ -2645,7 +2645,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Client uses wrong password" @@ -2653,7 +2653,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since server config differs from client" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Client address does not match address configured with password" @@ -2664,7 +2664,7 @@ ipv6_tcp_md5() # client in prefix log_start run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config" @@ -2672,7 +2672,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since client uses wrong password" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password" @@ -2680,7 +2680,7 @@ ipv6_tcp_md5() log_start show_hint "Should timeout since client address is outside of prefix" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -c ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix" @@ -2691,14 +2691,14 @@ ipv6_tcp_md5() log_start run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF" log_start run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF" @@ -2706,7 +2706,7 @@ ipv6_tcp_md5() show_hint "Should timeout since client in default VRF uses VRF password" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw" @@ -2714,21 +2714,21 @@ ipv6_tcp_md5() show_hint "Should timeout since client in VRF uses default VRF password" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw" log_start run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF" log_start run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF" @@ -2736,7 +2736,7 @@ ipv6_tcp_md5() show_hint "Should timeout since client in default VRF uses VRF password" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW} log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw" @@ -2744,7 +2744,7 @@ ipv6_tcp_md5() show_hint "Should timeout since client in VRF uses default VRF password" run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} & run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW} log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw" @@ -2772,7 +2772,7 @@ ipv6_tcp_novrf() do log_start run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Global server" done @@ -2793,7 +2793,7 @@ ipv6_tcp_novrf() do log_start run_cmd_nsb nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 0 "Client" done @@ -2802,7 +2802,7 @@ ipv6_tcp_novrf() do log_start run_cmd_nsb nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 0 "Client, device bind" done @@ -2822,7 +2822,7 @@ ipv6_tcp_novrf() do log_start run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 0 "Global server, local connection" done @@ -2830,7 +2830,7 @@ ipv6_tcp_novrf() a=${NSA_IP6} log_start run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, unbound client, local connection" @@ -2839,7 +2839,7 @@ ipv6_tcp_novrf() log_start show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope" run_cmd nettest -6 -s -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 1 "Device server, unbound client, local connection" done @@ -2847,7 +2847,7 @@ ipv6_tcp_novrf() a=${NSA_IP6} log_start run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "Global server, device client, local connection" @@ -2856,7 +2856,7 @@ ipv6_tcp_novrf() log_start show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope" run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 1 "Global server, device client, local connection" done @@ -2865,7 +2865,7 @@ ipv6_tcp_novrf() do log_start run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Device server, device client, local conn" done @@ -2898,7 +2898,7 @@ ipv6_tcp_vrf() log_start show_hint "Should fail 'Connection refused' since global server with VRF is disabled" run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 1 "Global server" done @@ -2907,7 +2907,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "VRF server" done @@ -2916,7 +2916,7 @@ ipv6_tcp_vrf() a=${NSA_LINKIP6}%${NSB_DEV} log_start run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "VRF server" @@ -2924,7 +2924,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Device server" done @@ -2943,7 +2943,7 @@ ipv6_tcp_vrf() log_start show_hint "Should fail 'Connection refused' since global server with VRF is disabled" run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 1 "Global server, local connection" @@ -2964,7 +2964,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Global server" done @@ -2973,7 +2973,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "VRF server" done @@ -2982,13 +2982,13 @@ ipv6_tcp_vrf() a=${NSA_LINKIP6}%${NSB_DEV} log_start run_cmd nettest -6 -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Global server" log_start run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "VRF server" @@ -2996,7 +2996,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 0 "Device server" done @@ -3016,7 +3016,7 @@ ipv6_tcp_vrf() log_start show_hint "Fails 'Connection refused' since client is not in VRF" run_cmd nettest -6 -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 1 "Global server, local connection" done @@ -3029,7 +3029,7 @@ ipv6_tcp_vrf() do log_start run_cmd_nsb nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -6 -r ${a} -d ${VRF} log_test_addr ${a} $? 0 "Client, VRF bind" done @@ -3038,7 +3038,7 @@ ipv6_tcp_vrf() log_start show_hint "Fails since VRF device does not allow linklocal addresses" run_cmd_nsb nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -6 -r ${a} -d ${VRF} log_test_addr ${a} $? 1 "Client, VRF bind" @@ -3046,7 +3046,7 @@ ipv6_tcp_vrf() do log_start run_cmd_nsb nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 0 "Client, device bind" done @@ -3071,7 +3071,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local connection" done @@ -3079,7 +3079,7 @@ ipv6_tcp_vrf() a=${NSA_IP6} log_start run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "VRF server, device client, local connection" @@ -3087,13 +3087,13 @@ ipv6_tcp_vrf() log_start show_hint "Should fail since unbound client is out of VRF scope" run_cmd nettest -6 -s -I ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} log_test_addr ${a} $? 1 "VRF server, unbound client, local connection" log_start run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a} log_test_addr ${a} $? 0 "Device server, VRF client, local connection" @@ -3101,7 +3101,7 @@ ipv6_tcp_vrf() do log_start run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local connection" done @@ -3141,13 +3141,13 @@ ipv6_udp_novrf() do log_start run_cmd nettest -6 -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Global server" log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Device server" done @@ -3155,7 +3155,7 @@ ipv6_udp_novrf() a=${NSA_LO_IP6} log_start run_cmd nettest -6 -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Global server" @@ -3165,7 +3165,7 @@ ipv6_udp_novrf() #log_start #show_hint "Should fail since loopback address is out of scope" #run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - #sleep 1 + wait_local_port_listen ${NSA} 12345 udp #run_cmd_nsb nettest -6 -D -r ${a} #log_test_addr ${a} $? 1 "Device server" @@ -3185,25 +3185,25 @@ ipv6_udp_novrf() do log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -r ${a} -0 ${NSA_IP6} log_test_addr ${a} $? 0 "Client" log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP6} log_test_addr ${a} $? 0 "Client, device bind" log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP6} log_test_addr ${a} $? 0 "Client, device send via cmsg" log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP6} log_test_addr ${a} $? 0 "Client, device bind via IPV6_UNICAST_IF" @@ -3225,7 +3225,7 @@ ipv6_udp_novrf() do log_start run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} -0 ${a} -1 ${a} log_test_addr ${a} $? 0 "Global server, local connection" done @@ -3233,7 +3233,7 @@ ipv6_udp_novrf() a=${NSA_IP6} log_start run_cmd nettest -6 -s -D -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Device server, unbound client, local connection" @@ -3242,7 +3242,7 @@ ipv6_udp_novrf() log_start show_hint "Should fail 'Connection refused' since address is out of device scope" run_cmd nettest -6 -s -D -I ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} log_test_addr ${a} $? 1 "Device server, local connection" done @@ -3250,19 +3250,19 @@ ipv6_udp_novrf() a=${NSA_IP6} log_start run_cmd nettest -6 -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Global server, device client, local connection" log_start run_cmd nettest -6 -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -C -r ${a} log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection" log_start run_cmd nettest -6 -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -S -r ${a} log_test_addr ${a} $? 0 "Global server, device client via IPV6_UNICAST_IF, local connection" @@ -3271,28 +3271,28 @@ ipv6_udp_novrf() log_start show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} log_test_addr ${a} $? 1 "Global server, device client, local connection" log_start show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -C log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection" log_start show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection" log_start show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S -U log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection, with connect()" done @@ -3300,7 +3300,7 @@ ipv6_udp_novrf() a=${NSA_IP6} log_start run_cmd nettest -6 -D -s -I ${NSA_DEV} -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} -0 ${a} log_test_addr ${a} $? 0 "Device server, device client, local conn" @@ -3314,7 +3314,7 @@ ipv6_udp_novrf() run_cmd_nsb ip -6 ro add ${NSA_IP6}/128 dev ${NSB_DEV} log_start run_cmd nettest -6 -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${NSA_IP6} log_test $? 0 "UDP in - LLA to GUA" @@ -3338,7 +3338,7 @@ ipv6_udp_vrf() log_start show_hint "Should fail 'Connection refused' since global server is disabled" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 1 "Global server" done @@ -3347,7 +3347,7 @@ ipv6_udp_vrf() do log_start run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "VRF server" done @@ -3356,7 +3356,7 @@ ipv6_udp_vrf() do log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Enslaved device server" done @@ -3378,7 +3378,7 @@ ipv6_udp_vrf() log_start show_hint "Should fail 'Connection refused' since global server is disabled" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 1 "Global server, VRF client, local conn" done @@ -3387,7 +3387,7 @@ ipv6_udp_vrf() do log_start run_cmd nettest -6 -D -I ${VRF} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" done @@ -3396,25 +3396,25 @@ ipv6_udp_vrf() log_start show_hint "Should fail 'Connection refused' since global server is disabled" run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 1 "Global server, device client, local conn" log_start run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "VRF server, device client, local conn" log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn" log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn" @@ -3429,7 +3429,7 @@ ipv6_udp_vrf() do log_start run_cmd nettest -6 -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Global server" done @@ -3438,7 +3438,7 @@ ipv6_udp_vrf() do log_start run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "VRF server" done @@ -3447,7 +3447,7 @@ ipv6_udp_vrf() do log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${a} log_test_addr ${a} $? 0 "Enslaved device server" done @@ -3465,7 +3465,7 @@ ipv6_udp_vrf() # log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${NSB_IP6} log_test $? 0 "VRF client" @@ -3476,7 +3476,7 @@ ipv6_udp_vrf() log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_IP6} log_test $? 0 "Enslaved device client" @@ -3491,13 +3491,13 @@ ipv6_udp_vrf() a=${NSA_IP6} log_start run_cmd nettest -6 -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Global server, VRF client, local conn" #log_start run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" @@ -3505,13 +3505,13 @@ ipv6_udp_vrf() a=${VRF_IP6} log_start run_cmd nettest -6 -D -s -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Global server, VRF client, local conn" log_start run_cmd nettest -6 -D -I ${VRF} -s -3 ${VRF} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" @@ -3527,25 +3527,25 @@ ipv6_udp_vrf() a=${NSA_IP6} log_start run_cmd nettest -6 -D -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Global server, device client, local conn" log_start run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "VRF server, device client, local conn" log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${VRF} -r ${a} log_test_addr ${a} $? 0 "Device server, VRF client, local conn" log_start run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} log_test_addr ${a} $? 0 "Device server, device client, local conn" @@ -3557,7 +3557,7 @@ ipv6_udp_vrf() # link local addresses log_start run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -d ${NSB_DEV} -r ${NSA_LINKIP6} log_test $? 0 "Global server, linklocal IP" @@ -3568,7 +3568,7 @@ ipv6_udp_vrf() log_start run_cmd_nsb nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_LINKIP6} log_test $? 0 "Enslaved device client, linklocal IP" @@ -3579,7 +3579,7 @@ ipv6_udp_vrf() log_start run_cmd nettest -6 -D -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSA_LINKIP6} log_test $? 0 "Enslaved device client, local conn - linklocal IP" @@ -3592,7 +3592,7 @@ ipv6_udp_vrf() run_cmd_nsb ip -6 ro add ${NSA_IP6}/128 dev ${NSB_DEV} log_start run_cmd nettest -6 -s -D & - sleep 1 + wait_local_port_listen ${NSA} 12345 udp run_cmd_nsb nettest -6 -D -r ${NSA_IP6} log_test $? 0 "UDP in - LLA to GUA" @@ -3771,7 +3771,7 @@ ipv6_rt() do log_start run_cmd nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3785,7 +3785,7 @@ ipv6_rt() do log_start run_cmd nettest ${varg} -I ${VRF} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3799,7 +3799,7 @@ ipv6_rt() do log_start run_cmd nettest ${varg} -I ${NSA_DEV} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${varg} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3814,7 +3814,7 @@ ipv6_rt() # log_start run_cmd_nsb nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest ${varg} -d ${VRF} -r ${NSB_IP6} & sleep 3 run_cmd ip link del ${VRF} @@ -3825,7 +3825,7 @@ ipv6_rt() log_start run_cmd_nsb nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSB} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${NSB_IP6} & sleep 3 run_cmd ip link del ${VRF} @@ -3842,7 +3842,7 @@ ipv6_rt() do log_start run_cmd nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${VRF} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3856,7 +3856,7 @@ ipv6_rt() do log_start run_cmd nettest ${varg} -I ${VRF} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${VRF} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3869,7 +3869,7 @@ ipv6_rt() a=${NSA_IP6} log_start run_cmd nettest ${varg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3880,7 +3880,7 @@ ipv6_rt() log_start run_cmd nettest ${varg} -I ${VRF} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3891,7 +3891,7 @@ ipv6_rt() log_start run_cmd nettest ${varg} -I ${NSA_DEV} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & sleep 3 run_cmd ip link del ${VRF} @@ -3950,7 +3950,7 @@ netfilter_tcp_reset() do log_start run_cmd nettest -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -r ${a} log_test_addr ${a} $? 1 "Global server, reject with TCP-reset on Rx" done @@ -3968,7 +3968,7 @@ netfilter_icmp() do log_start run_cmd nettest ${arg} -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest ${arg} -r ${a} log_test_addr ${a} $? 1 "Global ${stype} server, Rx reject icmp-port-unreach" done @@ -4007,7 +4007,7 @@ netfilter_tcp6_reset() do log_start run_cmd nettest -6 -s & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 -r ${a} log_test_addr ${a} $? 1 "Global server, reject with TCP-reset on Rx" done @@ -4025,7 +4025,7 @@ netfilter_icmp6() do log_start run_cmd nettest -6 -s ${arg} & - sleep 1 + wait_local_port_listen ${NSA} 12345 tcp run_cmd_nsb nettest -6 ${arg} -r ${a} log_test_addr ${a} $? 1 "Global ${stype} server, Rx reject icmp-port-unreach" done @@ -4221,12 +4221,12 @@ use_case_snat_on_vrf() run_cmd ip6tables -t nat -A POSTROUTING -p tcp -m tcp --dport ${port} -j SNAT --to-source ${NSA_LO_IP6} -o ${VRF} run_cmd_nsb nettest -s -l ${NSB_IP} -p ${port} & - sleep 1 + wait_local_port_listen ${NSB} ${port} tcp run_cmd nettest -d ${VRF} -r ${NSB_IP} -p ${port} log_test $? 0 "IPv4 TCP connection over VRF with SNAT" run_cmd_nsb nettest -6 -s -l ${NSB_IP6} -p ${port} & - sleep 1 + wait_local_port_listen ${NSB} ${port} tcp run_cmd nettest -6 -d ${VRF} -r ${NSB_IP6} -p ${port} log_test $? 0 "IPv6 TCP connection over VRF with SNAT" -- 2.51.0

2 weeks, 6 days

2
5
0 0

[PATCHv2 1/2] bonding: don't set oif to bond dev when getting NS target destination

by Hangbin Liu

Unlike IPv4, IPv6 routing strictly requires the source address to be valid on the outgoing interface. If the NS target is set to a remote VLAN interface, and the source address is also configured on a VLAN over a bond interface, setting the oif to the bond device will fail to retrieve the correct destination route. Fix this by not setting the oif to the bond device when retrieving the NS target destination. This allows the correct destination device (the VLAN interface) to be determined, so that bond_verify_device_path can return the proper VLAN tags for sending NS messages. Reported-by: David Wilder <wilder(a)us.ibm.com> Closes: https://lore.kernel.org/netdev/aGOKggdfjv0cApTO@fedora/ Suggested-by: Jay Vosburgh <jv(a)jvosburgh.net> Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- v2: split the patch into 2 parts, the kernel change and test update (Jay Vosburgh) --- drivers/net/bonding/bond_main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 257333c88710..30cf97f4e814 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3355,7 +3355,6 @@ static void bond_ns_send_all(struct bonding *bond, struct slave *slave) /* Find out through which dev should the packet go */ memset(&fl6, 0, sizeof(struct flowi6)); fl6.daddr = targets[i]; - fl6.flowi6_oif = bond->dev->ifindex; dst = ip6_route_output(dev_net(bond->dev), NULL, &fl6); if (dst->error) { -- 2.50.1

2 weeks, 6 days

4
6
0 0

Re: [PATCH net-next 0/3] mptcp: make ADD_ADDR retransmission timeout adaptive

by patchwork-bot+netdevbpf＠kernel.org

Hello: This series was applied to netdev/net-next.git (main) by Jakub Kicinski <kuba(a)kernel.org>: On Sun, 07 Sep 2025 17:32:41 +0200 you wrote: > Currently, the MPTCP ADD_ADDR notifications are retransmitted after a > fixed timeout controlled by the net.mptcp.add_addr_timeout sysctl knob, > if the corresponding "echo" packets are not received before. This can be > too slow (or too quick), especially with a too cautious default value > set to 2 minutes. > > - Patch 1: make ADD_ADDR retransmission timeout adaptive, using the > TCP's retransmission timeout. The corresponding sysctl knob is now > used as a maximum value. > > [...] Here is the summary with links: - [net-next,1/3] mptcp: make ADD_ADDR retransmission timeout adaptive https://git.kernel.org/netdev/net-next/c/30549eebc4d8 - [net-next,2/3] selftests: mptcp: join: tolerate more ADD_ADDR https://git.kernel.org/netdev/net-next/c/63c31d42cf6f - [net-next,3/3] selftests: mptcp: join: allow more time to send ADD_ADDR https://git.kernel.org/netdev/net-next/c/e2cda6343bfe You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html

2 weeks, 6 days

1
0
0 0

[PATCH net 1/2] bonding: set random address only when slaves already exist

by Hangbin Liu

Commit 5c3bf6cba791 ("bonding: assign random address if device address is same as bond") fixed an issue where, after releasing the first slave and re-adding it to the bond with fail_over_mac=follow, both the active and backup slaves could end up with duplicate MAC addresses. To avoid this, the new slave was assigned a random address. However, if this happens when adding the very first slave, the bond’s hardware address is set to match the slave’s. Later, during the fail_over_mac=follow check, the slave’s MAC is randomized because it naturally matches the bond, which is incorrect. The issue is normally hidden since the first slave usually becomes the active one, which restores the bond's MAC address. However, if another slave is selected as the initial active interface, the issue becomes visible. Fix this by assigning a random address only when slaves already exist in the bond. Fixes: 5c3bf6cba791 ("bonding: assign random address if device address is same as bond") Reported-by: Qiuling Ren <qren(a)redhat.com> Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- drivers/net/bonding/bond_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 257333c88710..8832bc9f107b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2132,6 +2132,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, memcpy(ss.__data, bond_dev->dev_addr, bond_dev->addr_len); } else if (bond->params.fail_over_mac == BOND_FOM_FOLLOW && BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP && + bond_has_slaves(bond) && memcmp(slave_dev->dev_addr, bond_dev->dev_addr, bond_dev->addr_len) == 0) { /* Set slave to random address to avoid duplicate mac * address in later fail over. -- 2.50.1

2 weeks, 6 days

2
6
0 0

[PATCH net-next] selftests: net: speed up pmtu.sh by avoiding unnecessary cleanup

by Jakub Kicinski

The pmtu test takes nearly an hour when run on a debug kernel (10min on a normal kernel, so the debug slow down is quite significant). NIPA tries to ensure all results are delivered by a certain deadline so this prevents it from retrying the test in case of a flake. Looks like one of the slowest operations in the test is calling out to ./openvswitch/ovs-dpctl.py to remove potential leftover OvS interfaces. Check whether the interfaces exist in the first place in sysfs, since it can be done directly in bash it is very fast. This should save us around 20-30% of the test runtime. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- tools/testing/selftests/net/pmtu.sh | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh index 88e914c4eef9..a3323c21f001 100755 --- a/tools/testing/selftests/net/pmtu.sh +++ b/tools/testing/selftests/net/pmtu.sh @@ -1089,10 +1089,11 @@ cleanup() { cleanup_all_ns - ip link del veth_A-C 2>/dev/null - ip link del veth_A-R1 2>/dev/null - cleanup_del_ovs_internal - cleanup_del_ovs_vswitchd + [ -e "/sys/class/net/veth_A-C" ] && ip link del veth_A-C + [ -e "/sys/class/net/veth_A-R1" ] && ip link del veth_A-R1 + [ -e "/sys/class/net/ovs_br0" ] && cleanup_del_ovs_internal + [ -e "/sys/class/net/ovs_br0" ] && cleanup_del_ovs_vswitchd + rm -f "$tmpoutfile" } -- 2.51.0

2 weeks, 6 days

3
2
0 0

[PATCH net-next v2] selftests: net: run groups from fcnal-test in parallel

by Jakub Kicinski

fcnal-test.sh takes almost hour and a half to finish. The tests are already grouped into ipv4, ipv6 and other. Run those groups separately. Reviewed-by: David Ahern <dsahern(a)kernel.org> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- v2: no changes, previous posting had a trivial Makefile conflict v1: https://lore.kernel.org/20250907012116.3315344-2-kuba@kernel.org --- tools/testing/selftests/net/Makefile | 4 +++- tools/testing/selftests/net/fcnal-ipv4.sh | 2 ++ tools/testing/selftests/net/fcnal-ipv6.sh | 2 ++ tools/testing/selftests/net/fcnal-other.sh | 2 ++ tools/testing/selftests/net/fcnal-test.sh | 3 +++ 5 files changed, 12 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/net/fcnal-ipv4.sh create mode 100755 tools/testing/selftests/net/fcnal-ipv6.sh create mode 100755 tools/testing/selftests/net/fcnal-other.sh diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 8c860782f9cd..8270f747ffbc 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -8,11 +8,12 @@ CFLAGS += -I../ TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh netdevice.sh \ rtnetlink.sh xfrm_policy.sh +TEST_PROGS += fcnal-ipv4.sh fcnal-ipv6.sh fcnal-other.sh TEST_PROGS += fib_tests.sh fib-onlink-tests.sh pmtu.sh udpgso.sh ip_defrag.sh TEST_PROGS += udpgso_bench.sh fib_rule_tests.sh msg_zerocopy.sh psock_snd.sh TEST_PROGS += udpgro_bench.sh udpgro.sh test_vxlan_under_vrf.sh reuseport_addr_any.sh TEST_PROGS += test_vxlan_fdb_changelink.sh so_txtime.sh ipv6_flowlabel.sh -TEST_PROGS += tcp_fastopen_backup_key.sh fcnal-test.sh l2tp.sh traceroute.sh +TEST_PROGS += tcp_fastopen_backup_key.sh l2tp.sh traceroute.sh TEST_PROGS += fin_ack_lat.sh fib_nexthop_multiprefix.sh fib_nexthops.sh fib_nexthop_nongw.sh TEST_PROGS += altnames.sh icmp.sh icmp_redirect.sh ip6_gre_headroom.sh TEST_PROGS += route_localnet.sh @@ -127,6 +128,7 @@ TEST_GEN_FILES += $(YNL_GEN_FILES) TEST_GEN_PROGS += $(YNL_GEN_PROGS) TEST_FILES := settings +TEST_FILES += fcnal-test.sh TEST_FILES += in_netns.sh lib.sh setup_loopback.sh setup_veth.sh TEST_GEN_FILES += $(patsubst %.c,%.o,$(wildcard *.bpf.c)) diff --git a/tools/testing/selftests/net/fcnal-ipv4.sh b/tools/testing/selftests/net/fcnal-ipv4.sh new file mode 100755 index 000000000000..82f9c867c3e8 --- /dev/null +++ b/tools/testing/selftests/net/fcnal-ipv4.sh @@ -0,0 +1,2 @@ +#!/bin/sh +./fcnal-test.sh -t ipv4 diff --git a/tools/testing/selftests/net/fcnal-ipv6.sh b/tools/testing/selftests/net/fcnal-ipv6.sh new file mode 100755 index 000000000000..ab1fc7aa3caf --- /dev/null +++ b/tools/testing/selftests/net/fcnal-ipv6.sh @@ -0,0 +1,2 @@ +#!/bin/sh +./fcnal-test.sh -t ipv6 diff --git a/tools/testing/selftests/net/fcnal-other.sh b/tools/testing/selftests/net/fcnal-other.sh new file mode 100755 index 000000000000..a840cf80b32e --- /dev/null +++ b/tools/testing/selftests/net/fcnal-other.sh @@ -0,0 +1,2 @@ +#!/bin/sh +./fcnal-test.sh -t other diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 0e3304d37fd0..49d85d267925 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -4272,6 +4272,7 @@ EOF TESTS_IPV4="ipv4_ping ipv4_tcp ipv4_udp ipv4_bind ipv4_runtime ipv4_netfilter" TESTS_IPV6="ipv6_ping ipv6_tcp ipv6_udp ipv6_bind ipv6_runtime ipv6_netfilter" TESTS_OTHER="use_cases" +# note: each TEST_ group needs a dedicated runner, e.g. fcnal-ipv4.sh PAUSE_ON_FAIL=no PAUSE=no @@ -4302,6 +4303,8 @@ elif [ "$TESTS" = "ipv4" ]; then TESTS="$TESTS_IPV4" elif [ "$TESTS" = "ipv6" ]; then TESTS="$TESTS_IPV6" +elif [ "$TESTS" = "other" ]; then + TESTS="$TESTS_OTHER" fi check_gen_prog "nettest" -- 2.51.0

2 weeks, 6 days

2
1
0 0

[PATCH nf-next v6 0/2] Add IPIP flowtable SW acceleratio

by Lorenzo Bianconi

Introduce SW acceleration for IPIP tunnels in the netfilter flowtable infrastructure. --- Changes in v6: - Rebase on top of nf-next main branch - Link to v5: https://lore.kernel.org/r/20250721-nf-flowtable-ipip-v5-0-0865af9e58c6@kern… Changes in v5: - Rely on __ipv4_addr_hash() to compute the hash used as encap ID - Remove unnecessary pskb_may_pull() in nf_flow_tuple_encap() - Add nf_flow_ip4_ecanp_pop utility routine - Link to v4: https://lore.kernel.org/r/20250718-nf-flowtable-ipip-v4-0-f8bb1c18b986@kern… Changes in v4: - Use the hash value of the saddr, daddr and protocol of outer IP header as encapsulation id. - Link to v3: https://lore.kernel.org/r/20250703-nf-flowtable-ipip-v3-0-880afd319b9f@kern… Changes in v3: - Add outer IP header sanity checks - target nf-next tree instead of net-next - Link to v2: https://lore.kernel.org/r/20250627-nf-flowtable-ipip-v2-0-c713003ce75b@kern… Changes in v2: - Introduce IPIP flowtable selftest - Link to v1: https://lore.kernel.org/r/20250623-nf-flowtable-ipip-v1-1-2853596e3941@kern… --- Lorenzo Bianconi (2): net: netfilter: Add IPIP flowtable SW acceleration selftests: netfilter: nft_flowtable.sh: Add IPIP flowtable selftest include/linux/netdevice.h | 1 + net/ipv4/ipip.c | 28 +++++++++++ net/netfilter/nf_flow_table_ip.c | 56 +++++++++++++++++++++- net/netfilter/nft_flow_offload.c | 1 + .../selftests/net/netfilter/nft_flowtable.sh | 40 ++++++++++++++++ 5 files changed, 124 insertions(+), 2 deletions(-) --- base-commit: bab3ce404553de56242d7b09ad7ea5b70441ea41 change-id: 20250623-nf-flowtable-ipip-1b3d7b08d067 Best regards, -- Lorenzo Bianconi <lorenzo(a)kernel.org>

2 weeks, 6 days

2
4
0 0

[PATCH RFC net-next 0/5] selftests: drv-net: Convert XDP program to bpf_dynptr

by Nimrod Oren

Hi all, This series updates the drv-net XDP program used by the new xdp.py selftest to use the bpf_dynptr APIs for packet access. The selftest itself is unchanged. The original program accessed packet headers directly via ctx->data/data_end, implicitly assuming headers are always in the linear region. That assumption is incorrect for multi-buffer XDP and does not hold across all drivers. For example, mlx5 with striding RQ can leave the linear area empty, causing the multi-buffer cases to fail. Switching to bpf_xdp_load/store_bytes would work but always incurs copies. Instead, this series adopts bpf_dynptr, which provides safe, verifier-checked access across both linear and fragmented areas while avoiding copies. Amery Hung has also proposed a series [1] that addresses the same issues in the program, but through the use of bpf_xdp_pull_data. My series is not intended as a replacement for that work, but rather as an exploration of another viable solution, each of which may be preferable under different circumstances. In cases where the program does not return XDP_PASS, I believe dynptr has an advantage since it avoids an extra copy. Conversely, when the program returns XDP_PASS, bpf_xdp_pull_data may be preferable, as the copy will be performed in any case during skb creation. It may make sense to split the work into two separate programs, allowing us to test both solutions independently. Alternatively, we can consider a combined approach, where the more fitting solution is applied for each use case. I welcome feedback on which direction would be most useful. [1] https://lore.kernel.org/all/20250905173352.3759457-1-ameryhung@gmail.com/ Thanks! Nimrod Nimrod Oren (5): selftests: drv-net: Test XDP_TX with bpf_dynptr selftests: drv-net: Test XDP tail adjustment with bpf_dynptr selftests: drv-net: Test XDP head adjustment with bpf_dynptr selftests: drv-net: Adjust XDP header data with bpf_dynptr selftests: drv-net: Check XDP header data with bpf_dynptr .../selftests/net/lib/xdp_native.bpf.c | 219 ++++++++---------- 1 file changed, 96 insertions(+), 123 deletions(-) -- 2.45.0

2 weeks, 6 days

3
7
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror September 2025