September 2025 - Linux-kselftest-mirror

[PATCH 0/2] Fix va_high_addr_switch.sh test failure

by Chunyu Hu

The two patches fix the va_high_addr_switch.sh test failure on x86_64. Patch 1 fixes the hugepages setup issue that nr_hugepages is reset too early in run_vmtests.sh and break the later va_high_addr_switch testing. Patch 2 fixes the test failure caused by the hint addr align method change in hugetlb_get_unmapped_area(). Chunyu Hu (2): selftests/mm: fix hugepages cleanup too early selftests/mm: fix va_high_addr_switch.sh failure on x86_64 tools/testing/selftests/mm/run_vmtests.sh | 9 +++++++-- tools/testing/selftests/mm/va_high_addr_switch.c | 4 ++-- 2 files changed, 9 insertions(+), 4 deletions(-) -- 2.49.0

3 weeks, 4 days

2
5
0 0

[PATCH] selftests/powerpc/pmu/: Add check_extended_reg_test to .gitignore

by Gopi Krishna Menon

Add the check_extended_reg_test binary to .gitignore to avoid accidentally staging the build artifact. Signed-off-by: Gopi Krishna Menon <krishnagopi487(a)gmail.com> --- tools/testing/selftests/powerpc/pmu/sampling_tests/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/powerpc/pmu/sampling_tests/.gitignore b/tools/testing/selftests/powerpc/pmu/sampling_tests/.gitignore index f93b4c7c3a8a..ea29228334e8 100644 --- a/tools/testing/selftests/powerpc/pmu/sampling_tests/.gitignore +++ b/tools/testing/selftests/powerpc/pmu/sampling_tests/.gitignore @@ -1,5 +1,6 @@ bhrb_filter_map_test bhrb_no_crash_wo_pmu_test +check_extended_reg_test intr_regs_no_crash_wo_pmu_test mmcr0_cc56run_test mmcr0_exceptionbits_test -- 2.43.0

3 weeks, 4 days

1
0
0 0

[bpf-next v2 0/5] powerpc64/bpf: Add support for bpf arena and arena atomics

by Saket Kumar Bhaskar

This patch series introduces support for the PROBE_MEM32, bpf_addr_space_cast and PROBE_ATOMIC instructions in the powerpc BPF JIT, facilitating the implementation of BPF arena and arena atomics. The last patch in the series has fix for arena spinlock selftest failure. All selftests related to bpf_arena, bpf_arena_atomic(except load_acquire/store_release) enablement are passing: # ./test_progs -t arena_list #5/1 arena_list/arena_list_1:OK #5/2 arena_list/arena_list_1000:OK #5 arena_list:OK Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED # ./test_progs -t arena_htab #4/1 arena_htab/arena_htab_llvm:OK #4/2 arena_htab/arena_htab_asm:OK #4 arena_htab:OK Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED # ./test_progs -t verifier_arena #464/1 verifier_arena/basic_alloc1:OK #464/2 verifier_arena/basic_alloc2:OK #464/3 verifier_arena/basic_alloc3:OK #464/4 verifier_arena/iter_maps1:OK #464/5 verifier_arena/iter_maps2:OK #464/6 verifier_arena/iter_maps3:OK #464 verifier_arena:OK #465/1 verifier_arena_large/big_alloc1:OK #465/2 verifier_arena_large/big_alloc2:OK #465 verifier_arena_large:OK Summary: 2/8 PASSED, 0 SKIPPED, 0 FAILED # ./test_progs -t arena_atomics #3/1 arena_atomics/add:OK #3/2 arena_atomics/sub:OK #3/3 arena_atomics/and:OK #3/4 arena_atomics/or:OK #3/5 arena_atomics/xor:OK #3/6 arena_atomics/cmpxchg:OK #3/7 arena_atomics/xchg:OK #3/8 arena_atomics/uaf:OK #3/9 arena_atomics/load_acquire:SKIP #3/10 arena_atomics/store_release:SKIP #3 arena_atomics:OK (SKIP: 2/10) Summary: 1/8 PASSED, 2 SKIPPED, 0 FAILED All selftests related to arena_spin_lock are passing: # ./test_progs -t arena_spin_lock #6/1 arena_spin_lock/arena_spin_lock_1:OK #6/2 arena_spin_lock/arena_spin_lock_1000:OK #6/3 arena_spin_lock/arena_spin_lock_50000:OK #6 arena_spin_lock:OK Summary: 1/3 PASSED, 0 SKIPPED, 0 FAILED Changes since v1: Addressed comments from Chris: * Squashed introduction of bpf_jit_emit_probe_mem_store() and its usage in one patch. * Defined and used PPC_RAW_RLDICL_DOT to avoid the CMPDI. * Removed conditional statement for fixup[0] = PPC_RAW_LI(dst_reg, 0); * Indicated this change is limited to powerpc64 in subject. Addressed comments from Alexei: * Removed skel->rodata->nr_cpus = get_nprocs() and its usage to get currently online cpus(as it needs to be updated from userspace). Saket Kumar Bhaskar (5): powerpc64/bpf: Implement PROBE_MEM32 pseudo instructions powerpc64/bpf: Implement bpf_addr_space_cast instruction powerpc64/bpf: Introduce bpf_jit_emit_atomic_ops() to emit atomic instructions powerpc64/bpf: Implement PROBE_ATOMIC instructions selftests/bpf: Fix arena_spin_lock selftest failure arch/powerpc/include/asm/ppc-opcode.h | 1 + arch/powerpc/net/bpf_jit.h | 6 +- arch/powerpc/net/bpf_jit_comp.c | 32 +- arch/powerpc/net/bpf_jit_comp32.c | 2 +- arch/powerpc/net/bpf_jit_comp64.c | 401 +++++++++++++----- .../bpf/prog_tests/arena_spin_lock.c | 13 + .../selftests/bpf/progs/arena_spin_lock.c | 5 +- 7 files changed, 347 insertions(+), 113 deletions(-) -- 2.43.5

3 weeks, 4 days

3
10
0 0

[PATCH v3 0/3] KVM: riscv: selftests: Enable supported test cases

by dayss1224＠gmail.com

From: Dong Yang <dayss1224(a)gmail.com> Add supported KVM test cases and fix the compilation dependencies. --- Changes in v3: - Reorder patches to fix build dependencies - Sort common supported test cases alphabetically - Move ucall_common.h include from common header to specific source files Changes in v2: - Delete some repeat KVM test cases on riscv - Add missing headers to fix the build for new RISC-V KVM selftests Dong Yang (1): KVM: riscv: selftests: Add missing headers for new testcases Quan Zhou (2): KVM: riscv: selftests: Use the existing RISCV_FENCE macro in `rseq-riscv.h` KVM: riscv: selftests: Add common supported test cases tools/testing/selftests/kvm/Makefile.kvm | 6 ++++++ tools/testing/selftests/kvm/access_tracking_perf_test.c | 1 + tools/testing/selftests/kvm/include/riscv/processor.h | 1 + .../selftests/kvm/memslot_modification_stress_test.c | 1 + tools/testing/selftests/kvm/memslot_perf_test.c | 1 + tools/testing/selftests/rseq/rseq-riscv.h | 3 +-- 6 files changed, 11 insertions(+), 2 deletions(-) -- 2.34.1

3 weeks, 4 days

4
6
0 0

[PATCH net-next] selftest: netcons: create a torture test

by Breno Leitao

Create a netconsole test that puts a lot of pressure on the netconsole list manipulation. Do it by creating dynamic targets and deleting targets while messages are being sent. Also put interface down while the messages are being sent, as creating parallel targets. The code launches three background jobs on distinct schedules: * Toggle netcons target every 30 iterations * create and delete random_target every 50 iterations * toggle iface every 70 iterations This creates multiple concurrency sources that interact with netconsole states. This is good practice to simulate stress, and exercise netpoll and netconsole locks. This test already found an issue as reported in [1] Link: https://lore.kernel.org/all/20250901-netpoll_memleak-v1-1-34a181977dfc@debi… [1] Signed-off-by: Breno Leitao <leitao(a)debian.org> --- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/netcons_torture.sh | 133 +++++++++++++++++++++ 2 files changed, 134 insertions(+) diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index 984ece05f7f92..2b253b1ff4f38 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -17,6 +17,7 @@ TEST_PROGS := \ netcons_fragmented_msg.sh \ netcons_overflow.sh \ netcons_sysdata.sh \ + netcons_torture.sh \ netpoll_basic.py \ ping.py \ queues.py \ diff --git a/tools/testing/selftests/drivers/net/netcons_torture.sh b/tools/testing/selftests/drivers/net/netcons_torture.sh new file mode 100755 index 0000000000000..d41884c83cab3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_torture.sh @@ -0,0 +1,133 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# Repeatedly send kernel messages, toggles netconsole targets on and off, +# creates and deletes targets in parallel, and toggles the source interface to +# simulate stress conditions. +# +# This test aims verify the robustness of netconsole under dynamic +# configurations and concurrent operations. +# +# The major goal is to run this test with LOCKDEP, Kmemleak and KASAN to make +# sure no issues is reported. +# +# Author: Breno Leitao <leitao(a)debian.org> + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +source "${SCRIPTDIR}"/lib/sh/lib_netcons.sh + +# Number of times the main loop run +ITERATIONS=${1:-1000} + +# Only test extended format +FORMAT="extended" +# And ipv6 only +IP_VERSION="ipv6" + +# Create, enable and delete some targets. +create_and_delete_random_target() { + COUNT=1 + RND_PREFIX=$(mktemp -u netcons_rnd_XXXX_) + + if [ -d "${NETCONS_CONFIGFS}/${RND_PREFIX}${COUNT}" ] || \ + [ -d "${NETCONS_CONFIGFS}/${RND_PREFIX}0" ]; then + echo "Function didn't finish yet, skipping it." >&2 + return + fi + + # enable COUNT targets + for i in $(seq 0 ${COUNT}) + do + RND_TARGET="${RND_PREFIX}"${i} + RND_TARGET_PATH="${NETCONS_CONFIGFS}"/"${RND_TARGET}" + + # Basic population so the target can come up + mkdir "${RND_TARGET_PATH}" + echo "${DSTIP}" > "${RND_TARGET_PATH}"/remote_ip + echo "${SRCIP}" > "${RND_TARGET_PATH}"/local_ip + echo "${DSTMAC}" > "${RND_TARGET_PATH}"/remote_mac + echo "${SRCIF}" > "${RND_TARGET_PATH}"/dev_name + + echo 1 > "${RND_TARGET_PATH}"/enabled + done + + echo "netconsole selftest: ${COUNT} additional target was created" > /dev/kmsg + # disable them all + for i in $(seq 0 ${COUNT}) + do + RND_TARGET="${RND_PREFIX}"${i} + RND_TARGET_PATH="${NETCONS_CONFIGFS}"/"${RND_TARGET}" + echo 0 > "${RND_TARGET_PATH}"/enabled + rmdir "${RND_TARGET_PATH}" + done +} + +# Disable and enable the target mid-air, while messages +# are being transmitted. +toggle_netcons_target() { + for i in $(seq 2) + do + if [ ! -d "${NETCONS_PATH}" ] + then + break + fi + echo 0 > "${NETCONS_PATH}"/enabled 2> /dev/null || true + # Try to enable a bit harder, given it might fail to enable + # Write to `enabled` might fail depending on the lock, which is + # highly contentious here + for _ in $(seq 5) + do + echo 1 > "${NETCONS_PATH}"/enabled 2> /dev/null || true + done + done +} + +toggle_iface(){ + ip link set "${SRCIF}" down + ip link set "${SRCIF}" up +} + +# Start here + +modprobe netdevsim 2> /dev/null || true +modprobe netconsole 2> /dev/null || true + +# Check for basic system dependency and exit if not found +check_for_dependencies +# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5) +echo "6 5" > /proc/sys/kernel/printk +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup EXIT +# Create one namespace and two interfaces +set_network "${IP_VERSION}" +# Create a dynamic target for netconsole +create_dynamic_target "${FORMAT}" + +for i in $(seq "$ITERATIONS") +do + for _ in $(seq 10) + do + echo "${MSG}: ${TARGET} ${i}" > /dev/kmsg + wait + done + + if (( i % 30 == 0 )); then + toggle_netcons_target & + fi + + if (( i % 50 == 0 )); then + # create some targets, enable them, send msg and disable + # all in a parallel thread + create_and_delete_random_target & + fi + + if (( i % 70 == 0 )); then + toggle_iface & + fi +done +wait + +exit "${ksft_pass}" --- base-commit: 2fd4161d0d2547650d9559d57fc67b4e0a26a9e3 change-id: 20250902-netconsole_torture-8fc23f0aca99 Best regards, -- Breno Leitao <leitao(a)debian.org>

3 weeks, 4 days

2
2
0 0

[PATCH 0/8] riscv: add initial support for hardware breakpoints

by Jesse Taube

This patchset adds initial support for hardware breakpoints and watchpoints to the RISC-V architecture. The framework is built on top of perf subsystem and SBI debug trigger extension. Currently following features are not supported and are in works: - icount for single stepping - Virtualization of debug triggers - kernel space debug triggers The SBI debug trigger extension can be found at: https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/src/ext-debug-tr… The Sdtrig ISA is part of RISC-V debug specification which can be found at: https://github.com/riscv/riscv-debug-spec based off the original RFC by Himanshu Chauhan here: https://lore.kernel.org/lkml/20240222125059.13331-1-hchauhan@ventanamicro.c… Second RFC by Jesse Taube here: https://lore.kernel.org/lkml/20250722173829.984082-1-jesse@rivosinc.com/ Himanshu Chauhan (2): riscv: Add SBI debug trigger extension and function ids riscv: Introduce support for hardware break/watchpoints Jesse Taube (6): riscv: Add insn.c, consolidate instruction decoding riscv: insn: Add get_insn_nofault riscv: hw_breakpoint: Use icount for single stepping riscv: ptrace: Add hw breakpoint support riscv: ptrace: Add hw breakpoint regset selftests: riscv: Add test for hardware breakpoints arch/riscv/Kconfig | 2 + arch/riscv/include/asm/bug.h | 12 - arch/riscv/include/asm/hw_breakpoint.h | 59 ++ arch/riscv/include/asm/insn.h | 132 ++- arch/riscv/include/asm/kdebug.h | 3 +- arch/riscv/include/asm/processor.h | 4 + arch/riscv/include/asm/sbi.h | 33 +- arch/riscv/include/uapi/asm/ptrace.h | 9 + arch/riscv/kernel/Makefile | 2 + arch/riscv/kernel/hw_breakpoint.c | 763 ++++++++++++++++++ arch/riscv/kernel/insn.c | 165 ++++ arch/riscv/kernel/kgdb.c | 102 +-- arch/riscv/kernel/probes/kprobes.c | 1 + arch/riscv/kernel/process.c | 4 + arch/riscv/kernel/ptrace.c | 169 ++++ arch/riscv/kernel/traps.c | 11 +- arch/riscv/kernel/traps_misaligned.c | 93 +-- include/uapi/linux/elf.h | 2 + tools/include/uapi/linux/elf.h | 1 + tools/perf/tests/tests.h | 3 +- tools/testing/selftests/riscv/Makefile | 2 +- .../selftests/riscv/breakpoints/.gitignore | 1 + .../selftests/riscv/breakpoints/Makefile | 13 + .../riscv/breakpoints/breakpoint_test.c | 246 ++++++ 24 files changed, 1641 insertions(+), 191 deletions(-) create mode 100644 arch/riscv/include/asm/hw_breakpoint.h create mode 100644 arch/riscv/kernel/hw_breakpoint.c create mode 100644 arch/riscv/kernel/insn.c create mode 100644 tools/testing/selftests/riscv/breakpoints/.gitignore create mode 100644 tools/testing/selftests/riscv/breakpoints/Makefile create mode 100644 tools/testing/selftests/riscv/breakpoints/breakpoint_test.c -- 2.43.0

3 weeks, 4 days

5
14
0 0

[PATCH v9 00/19] TDX KVM selftests

by Sagi Shahar

This is v9 of the TDX selftests. Thanks everyone for the thorough review on v8 [1]. I tried addressing all the comments. I'm terribly sorry if I missed something. The original v8 series [1] was split to make reviewing the test framework changes easier. This series includes the original patches up to the TDX lifecycle test which is the first TDX selftest in the series. This series is based on v6.17-rc2 Changes from v8: - Rebased on top of v6.17-rc2 - Drop several patches which are no longer needed now that TDX support is integrated into the common flow. - Split several patches to make reviewing easier. - Massive refactor compared to v8 to pull TDX special handling into __vm_create() and vm_vcpu_add() instead of creating separate functions for TDX. - Use kbuild to expose values from c to assembly code. - Move setup of the reset vectors to c code as suggested by Sean. - Drop redundant cpuid masking functions which are no longer necessary. - Initialize TDX protected pages one at a time instead of allocating large chinks of memory. - Add UCALL support for TDX to align with the rest of the selftests. - Minor fixes to kselftest_harness.h and virt_map() that were identified as part of this work. [1] https://lore.kernel.org/lkml/20250807201628.1185915-1-sagis@google.com/ Ackerley Tng (2): KVM: selftests: Add helpers to init TDX memory and finalize VM KVM: selftests: Add ucall support for TDX Erdem Aktas (2): KVM: selftests: Add TDX boot code KVM: selftests: Add support for TDX TDCALL from guest Isaku Yamahata (2): KVM: selftests: Update kvm_init_vm_address_properties() for TDX KVM: selftests: TDX: Use KVM_TDX_CAPABILITIES to validate TDs' attribute configuration Sagi Shahar (13): KVM: selftests: Include overflow.h instead of redefining is_signed_type() KVM: selftests: Allocate pgd in virt_map() as necessary KVM: selftests: Expose functions to get default sregs values KVM: selftests: Expose function to allocate guest vCPU stack KVM: selftests: Expose segment definitons to assembly files KVM: selftests: Add kbuild definitons KVM: selftests: Define structs to pass parameters to TDX boot code KVM: selftests: Set up TDX boot code region KVM: selftests: Set up TDX boot parameters region KVM: selftests: Add helper to initialize TDX VM KVM: selftests: Hook TDX support to vm and vcpu creation KVM: selftests: Add wrapper for TDX MMIO from guest KVM: selftests: Add TDX lifecycle test tools/include/linux/kbuild.h | 18 + tools/testing/selftests/kselftest_harness.h | 3 +- tools/testing/selftests/kvm/Makefile.kvm | 32 ++ .../selftests/kvm/include/x86/processor.h | 8 + .../selftests/kvm/include/x86/processor_asm.h | 12 + .../selftests/kvm/include/x86/tdx/td_boot.h | 81 ++++ .../kvm/include/x86/tdx/td_boot_asm.h | 16 + .../selftests/kvm/include/x86/tdx/tdcall.h | 34 ++ .../selftests/kvm/include/x86/tdx/tdx.h | 14 + .../selftests/kvm/include/x86/tdx/tdx_util.h | 86 ++++ .../testing/selftests/kvm/include/x86/ucall.h | 4 +- tools/testing/selftests/kvm/lib/kvm_util.c | 25 +- .../testing/selftests/kvm/lib/x86/processor.c | 122 ++++-- .../selftests/kvm/lib/x86/tdx/td_boot.S | 60 +++ .../kvm/lib/x86/tdx/td_boot_offsets.c | 21 + .../selftests/kvm/lib/x86/tdx/tdcall.S | 93 +++++ .../kvm/lib/x86/tdx/tdcall_offsets.c | 16 + tools/testing/selftests/kvm/lib/x86/tdx/tdx.c | 22 + .../selftests/kvm/lib/x86/tdx/tdx_util.c | 391 ++++++++++++++++++ tools/testing/selftests/kvm/lib/x86/ucall.c | 45 +- tools/testing/selftests/kvm/x86/tdx_vm_test.c | 31 ++ 21 files changed, 1095 insertions(+), 39 deletions(-) create mode 100644 tools/include/linux/kbuild.h create mode 100644 tools/testing/selftests/kvm/include/x86/processor_asm.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/td_boot.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/td_boot_asm.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/tdcall.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/tdx.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/tdx_util.h create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/td_boot.S create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/td_boot_offsets.c create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdcall.S create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdcall_offsets.c create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdx.c create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdx_util.c create mode 100644 tools/testing/selftests/kvm/x86/tdx_vm_test.c -- 2.51.0.rc1.193.gad69d77794-goog

3 weeks, 4 days

6
62
0 0

[PATCH net-next] selftests: net: Add tests to verify team driver option set and get.

by Marc Harvey

There are currently no kernel tests that verify setting and getting options of the team driver. In the future, options may be added that implicitly change other options, which will make it useful to have tests like these that show nothing breaks. There will be a follow up patch to this that adds new "rx_enabled" and "tx_enabled" options, which will implicitly affect the "enabled" option value and vice versa. The tests use teamnl to first set options to specific values and then gets them to compare to the set values. Signed-off-by: Marc Harvey <marcharvey(a)google.com> --- .../selftests/drivers/net/team/Makefile | 6 +- .../selftests/drivers/net/team/options.sh | 194 ++++++++++++++++++ 2 files changed, 198 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/team/options.sh diff --git a/tools/testing/selftests/drivers/net/team/Makefile b/tools/testing/selftests/drivers/net/team/Makefile index eaf6938f100e..8b00b70ce67f 100644 --- a/tools/testing/selftests/drivers/net/team/Makefile +++ b/tools/testing/selftests/drivers/net/team/Makefile @@ -1,11 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for net selftests -TEST_PROGS := dev_addr_lists.sh propagation.sh +TEST_PROGS := dev_addr_lists.sh propagation.sh options.sh TEST_INCLUDES := \ ../bonding/lag_lib.sh \ ../../../net/forwarding/lib.sh \ - ../../../net/lib.sh + ../../../net/lib.sh \ + ../../../net/in_netns.sh \ + ../../../net/lib/sh/defer.sh \ include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/net/team/options.sh b/tools/testing/selftests/drivers/net/team/options.sh new file mode 100755 index 000000000000..b9c7aa357ad5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/team/options.sh @@ -0,0 +1,194 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# These tests verify basic set and get functionality of the team +# driver options over netlink. + +# Run in private netns. +test_dir="$(dirname "$0")" +if [[ $# -eq 0 ]]; then + "${test_dir}"/../../../net/in_netns.sh "$0" __subprocess + exit $? +fi + +ALL_TESTS=" + team_test_options +" + +source "${test_dir}/../../../net/lib.sh" + +TEAM_PORT="team0" +MEMBER_PORT="dummy0" + +setup() +{ + ip link add name "${MEMBER_PORT}" type dummy + ip link add name "${TEAM_PORT}" type team +} + +get_and_check_value() +{ + local option_name="$1" + local expected_value="$2" + local port_flag="$3" + + local value_from_get + + value_from_get=$(teamnl "${TEAM_PORT}" getoption "${option_name}" \ + "${port_flag}") + if [[ $? != 0 ]]; then + echo "Could not get option '${option_name}'" >&2 + return 1 + fi + + if [[ "${value_from_get}" != "${expected_value}" ]]; then + echo "Incorrect value for option '${option_name}'" >&2 + echo "get (${value_from_get}) != set (${expected_value})" >&2 + return 1 + fi +} + +set_and_check_get() +{ + local option_name="$1" + local option_value="$2" + local port_flag="$3" + + local value_from_get + + teamnl "${TEAM_PORT}" setoption "${option_name}" "${option_value}" \ + "${port_flag}" + if [[ $? != 0 ]]; then + echo "'setoption ${option_name} ${option_value}' failed" >&2 + return 1 + fi + + get_and_check_value "${option_name}" "${option_value}" "${port_flag}" + return $? +} + +# Get a "port flag" to pass to the `teamnl` command. +# E.g. $?="dummy0" -> "port=dummy0", +# $?="" -> "" +get_port_flag() +{ + local port_name="$1" + + if [[ -n "${port_name}" ]]; then + echo "--port=${port_name}" + fi +} + +attach_port_if_specified() +{ + local port_name="${1}" + + if [[ -n "${port_name}" ]]; then + ip link set dev "${port_name}" master "${TEAM_PORT}" + return $? + fi +} + +detach_port_if_specified() +{ + local port_name="${1}" + + if [[ -n "${port_name}" ]]; then + ip link set dev "${port_name}" nomaster + return $? + fi +} + +####################################### +# Test that an option's get value matches its set value. +# Globals: +# RET - Used by testing infra like `check_err`. +# EXIT_STATUS - Used by `log_test` to whole script exit value. +# Arguments: +# option_name - The name of the option. +# value_1 - The first value to try setting. +# value_2 - The second value to try setting. +# port_name - The (optional) name of the attached port. +####################################### +team_test_option() +{ + local option_name="$1" + local value_1="$2" + local value_2="$3" + local possible_values="$2 $3 $2" + local port_name="$4" + local port_flag + + RET=0 + + echo "Setting '${option_name}' to '${value_1}' and '${value_2}'" + + attach_port_if_specified "${port_name}" + check_err $? "Couldn't attach ${port_name} to master" + port_flag=$(get_port_flag "${port_name}") + + # Set and get both possible values. + for value in ${possible_values}; do + set_and_check_get "${option_name}" "${value}" "${port_flag}" + check_err $? "Failed to set '${option_name}' to '${value}'" + done + + detach_port_if_specified "${port_name}" + check_err $? "Couldn't detach ${port_name} from its master" + + log_test "Set + Get '${option_name}' test" +} + +####################################### +# Test that getting a non-existant option fails. +# Globals: +# RET - Used by testing infra like `check_err`. +# EXIT_STATUS - Used by `log_test` to whole script exit value. +# Arguments: +# option_name - The name of the option. +# port_name - The (optional) name of the attached port. +####################################### +team_test_get_option_fails() +{ + local option_name="$1" + local port_name="$2" + local port_flag + + RET=0 + + attach_port_if_specified "${port_name}" + check_err $? "Couldn't attach ${port_name} to master" + port_flag=$(get_port_flag "${port_name}") + + # Just confirm that getting the value fails. + teamnl "${TEAM_PORT}" getoption "${option_name}" "${port_flag}" + check_fail $? "Shouldn't be able to get option '${option_name}'" + + detach_port_if_specified "${port_name}" + + log_test "Get '${option_name}' fails" +} + +team_test_options() +{ + # Wrong option name behavior. + team_test_get_option_fails fake_option1 + team_test_get_option_fails fake_option2 "${MEMBER_PORT}" + + # Correct set and get behavior. + team_test_option mode activebackup loadbalance + team_test_option notify_peers_count 0 5 + team_test_option notify_peers_interval 0 5 + team_test_option mcast_rejoin_count 0 5 + team_test_option mcast_rejoin_interval 0 5 + team_test_option enabled true false "${MEMBER_PORT}" + team_test_option user_linkup true false "${MEMBER_PORT}" + team_test_option user_linkup_enabled true false "${MEMBER_PORT}" + team_test_option priority 10 20 "${MEMBER_PORT}" + team_test_option queue_id 0 1 "${MEMBER_PORT}" +} + +require_command teamnl +setup +tests_run +exit "${EXIT_STATUS}" -- 2.51.0.355.g5224444f11-goog

3 weeks, 5 days

3
4
0 0

[PATCH bpf-next v3 0/3] selftests/bpf: benchmark all symbols for kprobe-multi

by Menglong Dong

Add the benchmark testcase "kprobe-multi-all", which will hook all the kernel functions during the testing. This series is separated out from [1]. Changes since V2: * add some comment to attach_ksyms_all, which notes that don't run the testing on a debug kernel Changes since V1: * introduce trace_blacklist instead of copy-pasting strcmp in the 2nd patch * use fprintf() instead of printf() in 3rd patch Link: https://lore.kernel.org/bpf/20250817024607.296117-1-dongml2@chinatelecom.cn/ [1] Menglong Dong (3): selftests/bpf: move get_ksyms and get_addrs to trace_helpers.c selftests/bpf: skip recursive functions for kprobe_multi selftests/bpf: add benchmark testing for kprobe-multi-all tools/testing/selftests/bpf/bench.c | 4 + .../selftests/bpf/benchs/bench_trigger.c | 61 +++++ .../selftests/bpf/benchs/run_bench_trigger.sh | 4 +- .../bpf/prog_tests/kprobe_multi_test.c | 220 +--------------- .../selftests/bpf/progs/trigger_bench.c | 12 + tools/testing/selftests/bpf/trace_helpers.c | 234 ++++++++++++++++++ tools/testing/selftests/bpf/trace_helpers.h | 3 + 7 files changed, 319 insertions(+), 219 deletions(-) -- 2.51.0

3 weeks, 5 days

3
5
0 0

[PATCH] selftests/bpf: Upon failures, exit with code 1 in test_xsk.sh

by Ricardo B. Marlière

Currently, even if some subtests fails, the end result will still yield "ok 1 selftests: bpf: test_xsk.sh". Fix it by exiting with 1 if there are any failures. Signed-off-by: Ricardo B. Marlière <rbm(a)suse.com> --- tools/testing/selftests/bpf/test_xsk.sh | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh index 65aafe0003db054e9dfd156092fed53b07be06a0..62db060298a4a3b4391ee4cfa50557cf4a62d3d5 100755 --- a/tools/testing/selftests/bpf/test_xsk.sh +++ b/tools/testing/selftests/bpf/test_xsk.sh @@ -241,4 +241,6 @@ done if [ $failures -eq 0 ]; then echo "All tests successful!" +else + exit 1 fi --- base-commit: 5b6d6fe1ca7b712c74f78426bb23c465fd34b322 change-id: 20250828-selftests-bpf-test_xsk_ret-1eb27dbac071 Best regards, -- Ricardo B. Marlière <rbm(a)suse.com>

3 weeks, 5 days

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror September 2025