- Linux-kselftest-mirror - lists.linaro.org

[PATCH v9 15/30] tracing: selftests: Add trace remote tests

by Vincent Donnefort

Exercise the tracefs interface for trace remote with a set of tests to check: * loading/unloading (unloading.tc) * reset (reset.tc) * size changes (buffer_size.tc) * consuming read (trace_pipe.tc) * non-consuming read (trace.tc) Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Vincent Donnefort <vdonnefort(a)google.com> diff --git a/tools/testing/selftests/ftrace/test.d/remotes/buffer_size.tc b/tools/testing/selftests/ftrace/test.d/remotes/buffer_size.tc new file mode 100644 index 000000000000..1a43280ffa97 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/buffer_size.tc @@ -0,0 +1,25 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote buffer size +# requires: remotes/test + +. $TEST_DIR/remotes/functions + +test_buffer_size() +{ + echo 0 > tracing_on + assert_unloaded + + echo 4096 > buffer_size_kb + echo 1 > tracing_on + assert_loaded + + echo 0 > tracing_on + echo 7 > buffer_size_kb +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + setup_remote_test + test_buffer_size +fi diff --git a/tools/testing/selftests/ftrace/test.d/remotes/functions b/tools/testing/selftests/ftrace/test.d/remotes/functions new file mode 100644 index 000000000000..97a09d564a34 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/functions @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 + +setup_remote() +{ + local name=$1 + + [ -e $TRACING_DIR/remotes/$name/write_event ] || exit_unresolved + + cd remotes/$name/ + echo 0 > tracing_on + clear_trace + echo 7 > buffer_size_kb + echo 0 > events/enable + echo 1 > events/$name/selftest/enable + echo 1 > tracing_on +} + +setup_remote_test() +{ + [ -d $TRACING_DIR/remotes/test/ ] || modprobe remote_test || exit_unresolved + + setup_remote "test" +} + +assert_loaded() +{ + grep -q "(loaded)" buffer_size_kb +} + +assert_unloaded() +{ + grep -q "(unloaded)" buffer_size_kb +} + +dump_trace_pipe() +{ + output=$(mktemp $TMPDIR/remote_test.XXXXXX) + cat trace_pipe > $output & + pid=$! + sleep 1 + kill -1 $pid + + echo $output +} + +check_trace() +{ + start_id="$1" + end_id="$2" + file="$3" + + # Ensure the file is not empty + test -n "$(head $file)" + + prev_ts=0 + id=0 + + # Only keep <timestamp> <id> + tmp=$(mktemp $TMPDIR/remote_test.XXXXXX) + sed -e 's/\[[0-9]*\]\s*$[0-9]*.[0-9]*$: [a-z]* id=$[0-9]*$/\1 \2/' $file > $tmp + + while IFS= read -r line; do + ts=$(echo $line | cut -d ' ' -f 1) + id=$(echo $line | cut -d ' ' -f 2) + + test $(echo "$ts>$prev_ts" | bc) -eq 1 + test $id -eq $start_id + + prev_ts=$ts + start_id=$((start_id + 1)) + done < $tmp + + test $id -eq $end_id + rm $tmp +} + +get_cpu_ids() +{ + sed -n 's/^processor\s*:\s*$[0-9]\+$.*/\1/p' /proc/cpuinfo +} + +get_page_size() { + sed -ne 's/^.*data.*size:$[0-9][0-9]*$.*/\1/p' events/header_page +} + +get_selftest_event_size() { + sed -ne 's/^.*field:.*;.*size:$[0-9][0-9]*$;.*/\1/p' events/*/selftest/format | awk '{s+=$1} END {print s}' +} diff --git a/tools/testing/selftests/ftrace/test.d/remotes/reset.tc b/tools/testing/selftests/ftrace/test.d/remotes/reset.tc new file mode 100644 index 000000000000..4d176349b2bc --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/reset.tc @@ -0,0 +1,90 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote reset +# requires: remotes/test + +. $TEST_DIR/remotes/functions + +check_reset() +{ + write_event_path="write_event" + taskset="" + + clear_trace + + # Is the buffer empty? + output=$(dump_trace_pipe) + test $(wc -l $output | cut -d ' ' -f1) -eq 0 + + if $(echo $(pwd) | grep -q "per_cpu/cpu"); then + write_event_path="../../write_event" + cpu_id=$(echo $(pwd) | sed -e 's/.*per_cpu\/cpu//') + taskset="taskset -c $cpu_id" + fi + rm $output + + # Can we properly write a new event? + $taskset echo 7890 > $write_event_path + output=$(dump_trace_pipe) + test $(wc -l $output | cut -d ' ' -f1) -eq 1 + grep -q "id=7890" $output + rm $output +} + +test_global_interface() +{ + output=$(mktemp $TMPDIR/remote_test.XXXXXX) + + # Confidence check + echo 123456 > write_event + output=$(dump_trace_pipe) + grep -q "id=123456" $output + rm $output + + # Reset single event + echo 1 > write_event + check_reset + + # Reset lost events + for i in $(seq 1 10000); do + echo 1 > write_event + done + check_reset +} + +test_percpu_interface() +{ + [ "$(get_cpu_ids | wc -l)" -ge 2 ] || return 0 + + for cpu in $(get_cpu_ids); do + taskset -c $cpu echo 1 > write_event + done + + check_non_empty=0 + for cpu in $(get_cpu_ids); do + cd per_cpu/cpu$cpu/ + + if [ $check_non_empty -eq 0 ]; then + check_reset + check_non_empty=1 + else + # Check we have only reset 1 CPU + output=$(dump_trace_pipe) + test $(wc -l $output | cut -d ' ' -f1) -eq 1 + rm $output + fi + cd - + done +} + +test_reset() +{ + test_global_interface + test_percpu_interface +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + setup_remote_test + test_reset +fi diff --git a/tools/testing/selftests/ftrace/test.d/remotes/trace.tc b/tools/testing/selftests/ftrace/test.d/remotes/trace.tc new file mode 100644 index 000000000000..081133ec45ff --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/trace.tc @@ -0,0 +1,127 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote non-consuming read +# requires: remotes/test + +. $TEST_DIR/remotes/functions + +test_trace() +{ + echo 0 > tracing_on + assert_unloaded + + echo 7 > buffer_size_kb + echo 1 > tracing_on + assert_loaded + + # Simple test: Emit few events and try to read them + for i in $(seq 1 8); do + echo $i > write_event + done + + check_trace 1 8 trace + + # + # Test interaction with consuming read + # + + cat trace_pipe > /dev/null & + pid=$! + + sleep 1 + kill $pid + + test $(wc -l < trace) -eq 0 + + for i in $(seq 16 32); do + echo $i > write_event + done + + check_trace 16 32 trace + + # + # Test interaction with reset + # + + echo 0 > trace + + test $(wc -l < trace) -eq 0 + + for i in $(seq 1 8); do + echo $i > write_event + done + + check_trace 1 8 trace + + # + # Test interaction with lost events + # + + # Ensure the writer is not on the reader page by reloading the buffer + echo 0 > tracing_on + echo 0 > trace + assert_unloaded + echo 1 > tracing_on + assert_loaded + + # Ensure ring-buffer overflow by emitting events from the same CPU + for cpu in $(get_cpu_ids); do + break + done + + events_per_page=$(($(get_page_size) / $(get_selftest_event_size))) # Approx: does not take TS into account + nr_events=$(($events_per_page * 2)) + for i in $(seq 1 $nr_events); do + taskset -c $cpu echo $i > write_event + done + + id=$(sed -n -e '1s/\[[0-9]*\]\s*[0-9]*.[0-9]*: [a-z]* id=$[0-9]*$/\1/p' trace) + test $id -ne 1 + + check_trace $id $nr_events trace + + # + # Test per-CPU interface + # + echo 0 > trace + + for cpu in $(get_cpu_ids) ; do + taskset -c $cpu echo $cpu > write_event + done + + for cpu in $(get_cpu_ids); do + cd per_cpu/cpu$cpu/ + + check_trace $cpu $cpu trace + + cd - > /dev/null + done + + # + # Test with hotplug + # + + [ "$(get_cpu_ids | wc -l)" -ge 2 ] || return 0 + + echo 0 > trace + + for cpu in $(get_cpu_ids); do + echo 0 > /sys/devices/system/cpu/cpu$cpu/online + break + done + + for i in $(seq 1 8); do + echo $i > write_event + done + + check_trace 1 8 trace + + echo 1 > /sys/devices/system/cpu/cpu$cpu/online +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + + setup_remote_test + test_trace +fi diff --git a/tools/testing/selftests/ftrace/test.d/remotes/trace_pipe.tc b/tools/testing/selftests/ftrace/test.d/remotes/trace_pipe.tc new file mode 100644 index 000000000000..d28eaee10c7c --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/trace_pipe.tc @@ -0,0 +1,127 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote consuming read +# requires: remotes/test + +. $TEST_DIR/remotes/functions + +test_trace_pipe() +{ + echo 0 > tracing_on + assert_unloaded + + # Emit events from the same CPU + for cpu in $(get_cpu_ids); do + break + done + + # + # Simple test: Emit enough events to fill few pages + # + + echo 1024 > buffer_size_kb + echo 1 > tracing_on + assert_loaded + + events_per_page=$(($(get_page_size) / $(get_selftest_event_size))) + nr_events=$(($events_per_page * 4)) + + output=$(mktemp $TMPDIR/remote_test.XXXXXX) + + cat trace_pipe > $output & + pid=$! + + for i in $(seq 1 $nr_events); do + taskset -c $cpu echo $i > write_event + done + + echo 0 > tracing_on + sleep 1 + kill $pid + + check_trace 1 $nr_events $output + + rm $output + + # + # Test interaction with lost events + # + + assert_unloaded + echo 7 > buffer_size_kb + echo 1 > tracing_on + assert_loaded + + nr_events=$((events_per_page * 2)) + for i in $(seq 1 $nr_events); do + taskset -c $cpu echo $i > write_event + done + + output=$(dump_trace_pipe) + + lost_events=$(sed -n -e '1s/CPU:.*\[LOST $[0-9]*$ EVENTS\]/\1/p' $output) + test -n "$lost_events" + + id=$(sed -n -e '2s/\[[0-9]*\]\s*[0-9]*.[0-9]*: [a-z]* id=$[0-9]*$/\1/p' $output) + test "$id" -eq $(($lost_events + 1)) + + # Drop [LOST EVENTS] line + sed -i '1d' $output + + check_trace $id $nr_events $output + + rm $output + + # + # Test per-CPU interface + # + + echo 0 > trace + echo 1 > tracing_on + + for cpu in $(get_cpu_ids); do + taskset -c $cpu echo $cpu > write_event + done + + for cpu in $(get_cpu_ids); do + cd per_cpu/cpu$cpu/ + output=$(dump_trace_pipe) + + check_trace $cpu $cpu $output + + rm $output + cd - > /dev/null + done + + # + # Test interaction with hotplug + # + + [ "$(get_cpu_ids | wc -l)" -ge 2 ] || return 0 + + echo 0 > trace + + for cpu in $(get_cpu_ids); do + echo 0 > /sys/devices/system/cpu/cpu$cpu/online + break + done + + for i in $(seq 1 8); do + echo $i > write_event + done + + output=$(dump_trace_pipe) + + check_trace 1 8 $output + + rm $output + + echo 1 > /sys/devices/system/cpu/cpu$cpu/online +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + + setup_remote_test + test_trace_pipe +fi diff --git a/tools/testing/selftests/ftrace/test.d/remotes/unloading.tc b/tools/testing/selftests/ftrace/test.d/remotes/unloading.tc new file mode 100644 index 000000000000..cac2190183f6 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/unloading.tc @@ -0,0 +1,41 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote unloading +# requires: remotes/test + +. $TEST_DIR/remotes/functions + +test_unloading() +{ + # No reader, writing + assert_loaded + + # No reader, no writing + echo 0 > tracing_on + assert_unloaded + + # 1 reader, no writing + cat trace_pipe & + pid=$! + sleep 1 + assert_loaded + kill $pid + assert_unloaded + + # No reader, no writing, events + echo 1 > tracing_on + echo 1 > write_event + echo 0 > tracing_on + assert_loaded + + # Test reset + clear_trace + assert_unloaded +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + + setup_remote_test + test_unloading +fi -- 2.52.0.107.ga0afd4fd5b-goog

1 week, 5 days

1
0
0 0

[PATCH net-next V3 0/6] selftests: drv-net: Fix issues in devlink_rate_tc_bw.py

by Carolina Jubran

Hi, This series fixes issues in the devlink_rate_tc_bw.py selftest and introduces a new Iperf3Runner that helps with measurement handling. Thanks, Carolina V3: - Replace generic Exception with specific exception types in load.py. V2: - Insert the test in the correct sorted position. Carolina Jubran (6): selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS selftests: drv-net: introduce Iperf3Runner for measurement use cases selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py .../testing/selftests/drivers/net/hw/Makefile | 1 + .../drivers/net/hw/devlink_rate_tc_bw.py | 174 ++++++++---------- .../drivers/net/hw/lib/py/__init__.py | 5 +- .../selftests/drivers/net/lib/py/__init__.py | 5 +- .../selftests/drivers/net/lib/py/load.py | 84 ++++++++- 5 files changed, 157 insertions(+), 112 deletions(-) -- 2.38.1

1 week, 6 days

2
7
0 0

[PATCH net-next 1/2] selftests: drv-net: gro: improve feature config

by Jakub Kicinski

We'll need to do a lot more feature handling to test HW-GRO and LRO. Clean up the feature handling for SW GRO a bit to let the next commit focus on the new test cases, only. Make sure HW GRO-like features are not enabled for the SW tests. Be more careful about changing features as "nothing changed" situations may result in non-zero error code from ethtool. Don't disable TSO on the local interface (receiver) when running over netdevsim, we just want GSO to break up the segments on the sender. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/drivers/net/gro.py | 38 ++++++++++++++++++++-- 1 file changed, 35 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/drivers/net/gro.py b/tools/testing/selftests/drivers/net/gro.py index ba83713bf7b5..6d633bdc7e67 100755 --- a/tools/testing/selftests/drivers/net/gro.py +++ b/tools/testing/selftests/drivers/net/gro.py @@ -20,7 +20,7 @@ coalescing behavior. import os from lib.py import ksft_run, ksft_exit, ksft_pr from lib.py import NetDrvEpEnv, KsftXfailEx -from lib.py import cmd, defer, bkg, ip +from lib.py import cmd, defer, bkg, ethtool, ip from lib.py import ksft_variants @@ -70,6 +70,27 @@ from lib.py import ksft_variants defer(ip, f"link set dev {dev['ifname']} mtu {dev['mtu']}", host=host) +def _set_ethtool_feat(dev, current, feats, host=None): + s2n = {True: "on", False: "off"} + + new = ["-K", dev] + old = ["-K", dev] + no_change = True + for name, state in feats.items(): + new += [name, s2n[state]] + old += [name, s2n[not state]] + + if current[name]["active"] != state: + no_change = False + if current[name]["fixed"]: + raise KsftXfailEx(f"Device does not support {name}") + if no_change: + return + + ethtool(" ".join(new), host=host) + defer(ethtool, " ".join(old), host=host) + + def _setup(cfg, test_name): """ Setup hardware loopback mode for GRO testing. """ @@ -77,6 +98,11 @@ from lib.py import ksft_variants cfg.bin_local = cfg.test_dir / "gro" cfg.bin_remote = cfg.remote.deploy(cfg.bin_local) + if not hasattr(cfg, "feat"): + cfg.feat = ethtool(f"-k {cfg.ifname}", json=True)[0] + cfg.remote_feat = ethtool(f"-k {cfg.remote_ifname}", + host=cfg.remote, json=True)[0] + # "large" test needs at least 4k MTU if test_name == "large": _set_mtu_restore(cfg.dev, 4096, None) @@ -88,15 +114,21 @@ from lib.py import ksft_variants _write_defer_restore(cfg, flush_path, "200000", defer_undo=True) _write_defer_restore(cfg, irq_path, "10", defer_undo=True) + _set_ethtool_feat(cfg.ifname, cfg.feat, + {"generic-receive-offload": True, + "rx-gro-hw": False, + "large-receive-offload": False}) + try: # Disable TSO for local tests cfg.require_nsim() # will raise KsftXfailEx if not running on nsim - cmd(f"ethtool -K {cfg.ifname} gro on tso off") - cmd(f"ethtool -K {cfg.remote_ifname} gro on tso off", host=cfg.remote) + _set_ethtool_feat(cfg.remote_ifname, cfg.remote_feat, {"tso": False}, + host=cfg.remote) except KsftXfailEx: pass + def _gro_variants(): """Generator that yields all combinations of protocol and test types.""" -- 2.51.1

1 week, 6 days

2
8
0 0

[PATCH net-next] selftests: net: py: handle interrupt during cleanup

by Jakub Kicinski

Following up on the old discussion [1]. Let the BaseExceptions out of defer()'ed cleanup. And handle it in the main loop. This allows us to exit the tests if user hit Ctrl-C during defer(). Link: https://lore.kernel.org/20251119063228.3adfd743@kernel.org # [1] Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: willemb(a)google.com CC: petrm(a)nvidia.com CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/lib/py/ksft.py | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/lib/py/ksft.py b/tools/testing/selftests/net/lib/py/ksft.py index ebd82940ee50..531e7fa1b3ea 100644 --- a/tools/testing/selftests/net/lib/py/ksft.py +++ b/tools/testing/selftests/net/lib/py/ksft.py @@ -163,7 +163,7 @@ KSFT_DISRUPTIVE = True entry = global_defer_queue.pop() try: entry.exec_only() - except BaseException: + except Exception: ksft_pr(f"Exception while handling defer / cleanup (callback {i} of {qlen_start})!") tb = traceback.format_exc() for line in tb.strip().split('\n'): @@ -333,7 +333,21 @@ KsftCaseFunction = namedtuple("KsftCaseFunction", KSFT_RESULT = False cnt_key = 'fail' - ksft_flush_defer() + try: + ksft_flush_defer() + except BaseException as e: + tb = traceback.format_exc() + for line in tb.strip().split('\n'): + ksft_pr("Exception|", line) + if isinstance(e, KeyboardInterrupt): + ksft_pr() + ksft_pr("WARN: defer() interrupted, cleanup may be incomplete.") + ksft_pr(" Attempting to finish cleanup before exiting.") + ksft_pr(" Interrupt again to exit immediately.") + ksft_pr() + stop = True + # Flush was interrupted, try to finish the job best we can + ksft_flush_defer() if not cnt_key: cnt_key = 'pass' if KSFT_RESULT else 'fail' -- 2.51.1

1 week, 6 days

4
3
0 0

[PATCH net-next] selftests: netconsole: remove log noise due to socat exit

by Andre Carvalho

This removes some noise that can be distracting while looking at selftests by redirecting socat stderr to /dev/null. Before this commit, netcons_basic would output: Running with target mode: basic (ipv6) 2025/11/29 12:08:03 socat[259] W exiting on signal 15 2025/11/29 12:08:03 socat[271] W exiting on signal 15 basic : ipv6 : Test passed Running with target mode: basic (ipv4) 2025/11/29 12:08:05 socat[329] W exiting on signal 15 2025/11/29 12:08:05 socat[322] W exiting on signal 15 basic : ipv4 : Test passed Running with target mode: extended (ipv6) 2025/11/29 12:08:08 socat[386] W exiting on signal 15 2025/11/29 12:08:08 socat[386] W exiting on signal 15 2025/11/29 12:08:08 socat[380] W exiting on signal 15 extended : ipv6 : Test passed Running with target mode: extended (ipv4) 2025/11/29 12:08:10 socat[440] W exiting on signal 15 2025/11/29 12:08:10 socat[435] W exiting on signal 15 2025/11/29 12:08:10 socat[435] W exiting on signal 15 extended : ipv4 : Test passed After these changes, output looks like: Running with target mode: basic (ipv6) basic : ipv6 : Test passed Running with target mode: basic (ipv4) basic : ipv4 : Test passed Running with target mode: extended (ipv6) extended : ipv6 : Test passed Running with target mode: extended (ipv4) extended : ipv4 : Test passed Signed-off-by: Andre Carvalho <asantostc(a)gmail.com> --- tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh index 87f89fd92f8c..ae8abff4be40 100644 --- a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh +++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh @@ -249,7 +249,7 @@ function listen_port_and_save_to() { # Just wait for 2 seconds timeout 2 ip netns exec "${NAMESPACE}" \ - socat "${SOCAT_MODE}":"${PORT}",fork "${OUTPUT}" + socat "${SOCAT_MODE}":"${PORT}",fork "${OUTPUT}" 2> /dev/null } # Only validate that the message arrived properly --- base-commit: ff736a286116d462a4067ba258fa351bc0b4ed80 change-id: 20251129-netcons-socat-noise-00e7ccf29560 Best regards, -- Andre Carvalho <asantostc(a)gmail.com>

1 week, 6 days

3
2
0 0

[PATCH net-next] selftests: net: add a hint about MACAddressPolicy=persistent

by Jakub Kicinski

New NIPA installation had been reporting a few flaky tests. arp_ndisc_evict_nocarrier is most flaky of them all. I suspect that the flakiness is due to udev swapping the MAC addresses on the interfaces. Extend the message in arp_ndisc_evict_nocarrier to hint at this potential issue. Having the neigh get fail right after ping is rather unusual, unless udev changes the MAC addr causing a flush in the meantime. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh b/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh index 92eb880c52f2..00758f00efbf 100755 --- a/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh +++ b/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh @@ -75,7 +75,7 @@ setup_v4() { ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 if [ $? -ne 0 ]; then cleanup_v4 - echo "failed" + echo "failed; is the system using MACAddressPolicy=persistent ?" exit 1 fi -- 2.51.1

1 week, 6 days

2
1
0 0

[PATCH v12 00/23] TDX KVM selftests

by Sagi Shahar

This is v12 of the TDX selftests. This series is based on v6.18-rc3 Changes from v11 [1]: - Rebased on top of v6.18-rc3. - Hook vm_tdx_finalize() into kvm_arch_vm_finalize_vcpus instead of calling it as part of vm_tdx_create_with_one_vcpu. See "KVM: selftests: Finalize TD memory as part of kvm_arch_vm_finalize_vcpus" which was added to this series. - Replaced vm_tdx_create_with_one_vcpu with vm_create_shape_with_one_vcpu following Sean's patch to simplify creating VM shapes. [1] https://lore.kernel.org/lkml/20250925172851.606193-1-sagis@google.com/ Ackerley Tng (2): KVM: selftests: Add helpers to init TDX memory and finalize VM KVM: selftests: Add ucall support for TDX Erdem Aktas (2): KVM: selftests: Add TDX boot code KVM: selftests: Add support for TDX TDCALL from guest Isaku Yamahata (2): KVM: selftests: Update kvm_init_vm_address_properties() for TDX KVM: selftests: TDX: Use KVM_TDX_CAPABILITIES to validate TDs' attribute configuration Sagi Shahar (16): KVM: selftests: Allocate pgd in virt_map() as necessary KVM: selftests: Expose functions to get default sregs values KVM: selftests: Expose function to allocate guest vCPU stack KVM: selftests: Expose segment definitons to assembly files KVM: selftests: Add kbuild definitons KVM: selftests: Define structs to pass parameters to TDX boot code KVM: selftests: Set up TDX boot code region KVM: selftests: Set up TDX boot parameters region KVM: selftests: Add helper to initialize TDX VM KVM: selftests: Call TDX init when creating a new TDX vm KVM: selftests: Setup memory regions for TDX on vm creation KVM: selftests: Call KVM_TDX_INIT_VCPU when creating a new TDX vcpu KVM: selftests: Set entry point for TDX guest code KVM: selftests: Finalize TD memory as part of kvm_arch_vm_finalize_vcpus KVM: selftests: Add wrapper for TDX MMIO from guest KVM: selftests: Add TDX lifecycle test Sean Christopherson (1): KVM: selftests: Add macros so simplify creating VM shapes for non-default types tools/include/linux/kbuild.h | 18 + tools/testing/selftests/kvm/Makefile.kvm | 32 ++ .../testing/selftests/kvm/include/kvm_util.h | 14 + .../selftests/kvm/include/ucall_common.h | 1 + .../selftests/kvm/include/x86/processor.h | 40 +++ .../selftests/kvm/include/x86/processor_asm.h | 12 + tools/testing/selftests/kvm/include/x86/sev.h | 2 - .../selftests/kvm/include/x86/tdx/td_boot.h | 74 ++++ .../kvm/include/x86/tdx/td_boot_asm.h | 16 + .../selftests/kvm/include/x86/tdx/tdcall.h | 34 ++ .../selftests/kvm/include/x86/tdx/tdx.h | 14 + .../selftests/kvm/include/x86/tdx/tdx_util.h | 84 +++++ .../testing/selftests/kvm/include/x86/ucall.h | 6 - tools/testing/selftests/kvm/lib/kvm_util.c | 10 +- .../testing/selftests/kvm/lib/x86/processor.c | 99 ++++-- tools/testing/selftests/kvm/lib/x86/sev.c | 16 - .../selftests/kvm/lib/x86/tdx/td_boot.S | 60 ++++ .../kvm/lib/x86/tdx/td_boot_offsets.c | 21 ++ .../selftests/kvm/lib/x86/tdx/tdcall.S | 93 +++++ .../kvm/lib/x86/tdx/tdcall_offsets.c | 16 + tools/testing/selftests/kvm/lib/x86/tdx/tdx.c | 23 ++ .../selftests/kvm/lib/x86/tdx/tdx_util.c | 330 ++++++++++++++++++ tools/testing/selftests/kvm/lib/x86/ucall.c | 46 ++- .../selftests/kvm/x86/sev_smoke_test.c | 40 +-- tools/testing/selftests/kvm/x86/tdx_vm_test.c | 33 ++ 25 files changed, 1056 insertions(+), 78 deletions(-) create mode 100644 tools/include/linux/kbuild.h create mode 100644 tools/testing/selftests/kvm/include/x86/processor_asm.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/td_boot.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/td_boot_asm.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/tdcall.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/tdx.h create mode 100644 tools/testing/selftests/kvm/include/x86/tdx/tdx_util.h create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/td_boot.S create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/td_boot_offsets.c create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdcall.S create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdcall_offsets.c create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdx.c create mode 100644 tools/testing/selftests/kvm/lib/x86/tdx/tdx_util.c create mode 100644 tools/testing/selftests/kvm/x86/tdx_vm_test.c -- 2.51.1.851.g4ebd6896fd-goog

1 week, 6 days

5
70
0 0

[PATCH] lib/test_vmalloc.c: Minor fixes to test_vmalloc.c

by Audra Mitchell

If PAGE_SIZE is larger than 4k and if you have a system with a large number of CPUs, this test can require a very large amount of memory leading to oom-killer firing. Given the type of allocation, the kernel won't have anything to kill, causing the system to stall. Add a parameter to the test_vmalloc driver to represent the number of times a percpu object will be allocated. Calculate this in test_vmalloc.sh to be 90% of available memory or the current default of 35000, whichever is smaller. Signed-off-by: Audra Mitchell <audra(a)redhat.com> --- lib/test_vmalloc.c | 11 +++++--- tools/testing/selftests/mm/test_vmalloc.sh | 31 +++++++++++++++++++--- 2 files changed, 35 insertions(+), 7 deletions(-) diff --git a/lib/test_vmalloc.c b/lib/test_vmalloc.c index 2815658ccc37..67e53cd6b619 100644 --- a/lib/test_vmalloc.c +++ b/lib/test_vmalloc.c @@ -57,6 +57,9 @@ __param(int, run_test_mask, 7, /* Add a new test case description here. */ ); +__param(int, nr_pcpu_objects, 35000, + "Number of pcpu objects to allocate for pcpu_alloc_test"); + /* * This is for synchronization of setup phase. */ @@ -292,24 +295,24 @@ pcpu_alloc_test(void) size_t size, align; int i; - pcpu = vmalloc(sizeof(void __percpu *) * 35000); + pcpu = vmalloc(sizeof(void __percpu *) * nr_pcpu_objects); if (!pcpu) return -1; - for (i = 0; i < 35000; i++) { + for (i = 0; i < nr_pcpu_objects; i++) { size = get_random_u32_inclusive(1, PAGE_SIZE / 4); /* * Maximum PAGE_SIZE */ - align = 1 << get_random_u32_inclusive(1, 11); + align = 1 << get_random_u32_inclusive(1, PAGE_SHIFT - 1); pcpu[i] = __alloc_percpu(size, align); if (!pcpu[i]) rv = -1; } - for (i = 0; i < 35000; i++) + for (i = 0; i < nr_pcpu_objects; i++) free_percpu(pcpu[i]); vfree(pcpu); diff --git a/tools/testing/selftests/mm/test_vmalloc.sh b/tools/testing/selftests/mm/test_vmalloc.sh index d39096723fca..b23d705bf570 100755 --- a/tools/testing/selftests/mm/test_vmalloc.sh +++ b/tools/testing/selftests/mm/test_vmalloc.sh @@ -13,6 +13,9 @@ TEST_NAME="vmalloc" DRIVER="test_${TEST_NAME}" NUM_CPUS=`grep -c ^processor /proc/cpuinfo` +# Default number of times we allocate percpu objects: +NR_PCPU_OBJECTS=35000 + # 1 if fails exitcode=1 @@ -27,6 +30,8 @@ PERF_PARAM="sequential_test_order=1 test_repeat_count=3" SMOKE_PARAM="test_loop_count=10000 test_repeat_count=10" STRESS_PARAM="nr_threads=$NUM_CPUS test_repeat_count=20" +PCPU_OBJ_PARAM="nr_pcpu_objects=$NR_PCPU_OBJECTS" + check_test_requirements() { uid=$(id -u) @@ -47,12 +52,30 @@ check_test_requirements() fi } +check_memory_requirement() +{ + # The pcpu_alloc_test allocates nr_pcpu_objects per cpu. If the + # PAGE_SIZE is on the larger side it is easier to set a value + # that can cause oom events during testing. Since we are + # testing the functionality of vmalloc and not the oom-killer, + # calculate what is 90% of available memory and divide it by + # the number of online CPUs. + pages=$(($(getconf _AVPHYS_PAGES) * 90 / 100 / $NUM_CPUS)) + + if (($pages < $NR_PCPU_OBJECTS)); then + echo "Updated nr_pcpu_objects to 90% of available memory." + echo "nr_pcpu_objects is now set to: $pages." + PCPU_OBJ_PARAM="nr_pcpu_objects=$pages" + fi +} + run_performance_check() { echo "Run performance tests to evaluate how fast vmalloc allocation is." echo "It runs all test cases on one single CPU with sequential order." - modprobe $DRIVER $PERF_PARAM > /dev/null 2>&1 + check_memory_requirement + modprobe $DRIVER $PERF_PARAM $PCPU_OBJ_PARAM > /dev/null 2>&1 echo "Done." echo "Check the kernel message buffer to see the summary." } @@ -63,7 +86,8 @@ run_stability_check() echo "available test cases are run by NUM_CPUS workers simultaneously." echo "It will take time, so be patient." - modprobe $DRIVER $STRESS_PARAM > /dev/null 2>&1 + check_memory_requirement + modprobe $DRIVER $STRESS_PARAM $PCPU_OBJ_PARAM > /dev/null 2>&1 echo "Done." echo "Check the kernel ring buffer to see the summary." } @@ -74,7 +98,8 @@ run_smoke_check() echo "Please check $0 output how it can be used" echo "for deep performance analysis as well as stress testing." - modprobe $DRIVER $SMOKE_PARAM > /dev/null 2>&1 + check_memory_requirement + modprobe $DRIVER $SMOKE_PARAM $PCPU_OBJ_PARAM > /dev/null 2>&1 echo "Done." echo "Check the kernel ring buffer to see the summary." } -- 2.51.0

1 week, 6 days

1
0
0 0

[PATCH RFC nf-next 0/4] Add IP6IP6 flowtable SW acceleration

by Lorenzo Bianconi

Introduce SW acceleration for IP6IP6 tunnels in the netfilter flowtable infrastructure. --- Lorenzo Bianconi (4): netfilter: Introduce tunnel metadata info in nf_flowtable_ctx struct netfilter: flowtable: Add IP6IP6 rx sw acceleration netfilter: flowtable: Add IP6IP6 tx sw acceleration selftests: netfilter: nft_flowtable.sh: Add IP6IP6 flowtable selftest net/ipv6/ip6_tunnel.c | 27 +++ net/netfilter/nf_flow_table_ip.c | 239 ++++++++++++++++++--- .../selftests/net/netfilter/nft_flowtable.sh | 62 +++++- 3 files changed, 285 insertions(+), 43 deletions(-) --- base-commit: 0177f0f07886e54e12c6f18fa58f63e63ddd3c58 change-id: 20251201-flowtable-offload-ip6ip6-578b61067648 Best regards, -- Lorenzo Bianconi <lorenzo(a)kernel.org>

1 week, 6 days

2
5
0 0

[PATCH v1 0/6] seccomp: support nested listeners

by Alexander Mikhalitsyn

Dear friends, this patch series adds support for nested seccomp listeners. It allows container runtimes and other sandboxing software to install seccomp listeners on top of existing ones, which is useful for nested LXC containers and other similar use-cases. I decided to go with conservative approach and limit the maximum number of nested listeners to 8 per seccomp filter chain (MAX_LISTENERS_PER_PATH). This is done to avoid dynamic memory allocations in the very hot __seccomp_filter() function, where we use a preallocated static array on the stack to track matched listeners. 8 nested listeners should be enough for almost any practical scenarios. Expecting potential discussions around this patch series, I'm going to present a talk at LPC 2025 about the design and implementation details of this feature [1]. Git tree (based on for-next/seccomp): v1: https://github.com/mihalicyn/linux/commits/seccomp.mult.listeners.v1 current: https://github.com/mihalicyn/linux/commits/seccomp.mult.listeners Link: https://lpc.events/event/19/contributions/2241/ [1] Cc: linux-doc(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-kselftest(a)vger.kernel.org Cc: bpf(a)vger.kernel.org Cc: Kees Cook <kees(a)kernel.org> Cc: Andy Lutomirski <luto(a)amacapital.net> Cc: Will Drewry <wad(a)chromium.org> Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: Shuah Khan <shuah(a)kernel.org> Cc: Tycho Andersen <tycho(a)tycho.pizza> Cc: Andrei Vagin <avagin(a)gmail.com> Cc: Christian Brauner <brauner(a)kernel.org> Cc: Stéphane Graber <stgraber(a)stgraber.org> Alexander Mikhalitsyn (6): seccomp: remove unused argument from seccomp_do_user_notification seccomp: prepare seccomp_run_filters() to support more than one listener seccomp: limit number of listeners in seccomp tree seccomp: handle multiple listeners case seccomp: relax has_duplicate_listeners check tools/testing/selftests/seccomp: test nested listeners .../userspace-api/seccomp_filter.rst | 6 + include/linux/seccomp.h | 3 +- include/uapi/linux/seccomp.h | 13 +- kernel/seccomp.c | 99 +++++++++-- tools/include/uapi/linux/seccomp.h | 13 +- tools/testing/selftests/seccomp/seccomp_bpf.c | 162 ++++++++++++++++++ 6 files changed, 269 insertions(+), 27 deletions(-) -- 2.43.0

1 week, 6 days

1
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror