- Linux-kselftest-mirror - lists.linaro.org

[PATCH v6 linux-kselftest-test 0/6] kunit: support building core/tests as modules

by Alan Maguire

The current kunit execution model is to provide base kunit functionality and tests built-in to the kernel. The aim of this series is to allow building kunit itself and tests as modules. This in turn allows a simple form of selective execution; load the module you wish to test. In doing so, kunit itself (if also built as a module) will be loaded as an implicit dependency. Because this requires a core API modification - if a module delivers multiple suites, they must be declared with the kunit_test_suites() macro - we're proposing this patch set as a candidate to be applied to the test tree before too many kunit consumers appear. We attempt to deal with existing consumers in patch 3. Changes since v5: - fixed fs/ext4/Makefile to remove unneeded conditional compilation (Iurii, patch 3) - added Reviewed-by, Acked-by to patches 3, 4, 5 and 6 Changes since v4: - fixed signoff chain to use Co-developed-by: prior to Knut's signoff (Stephen, all patches) - added Reviewed-by, Tested-by for patches 1, 2, 4 and 6 - updated comment describing try-catch-impl.h (Stephen, patch 2) - fixed MODULE_LICENSEs to be GPL v2 (Stephen, patches 3, 5) - added __init to kunit_init() (Stephen, patch 5) Changes since v3: - removed symbol lookup patch for separate submission later - removed use of sysctl_hung_task_timeout_seconds (patch 4, as discussed with Brendan and Stephen) - disabled build of string-stream-test when CONFIG_KUNIT_TEST=m; this is to avoid having to deal with symbol lookup issues - changed string-stream-impl.h back to string-stream.h (Brendan) - added module build support to new list, ext4 tests Changes since v2: - moved string-stream.h header to lib/kunit/string-stream-impl.h (Brendan) (patch 1) - split out non-exported interfaces in try-catch-impl.h (Brendan) (patch 2) - added kunit_find_symbol() and KUNIT_INIT_SYMBOL to lookup non-exported symbols (patches 3, 4) - removed #ifdef MODULE around module licenses (Randy, Brendan, Andy) (patch 4) - replaced kunit_test_suite() with kunit_test_suites() rather than supporting both (Brendan) (patch 4) - lookup sysctl_hung_task_timeout_secs as kunit may be built as a module and the symbol may not be available (patch 5) Alan Maguire (6): kunit: move string-stream.h to lib/kunit kunit: hide unexported try-catch interface in try-catch-impl.h kunit: allow kunit tests to be loaded as a module kunit: remove timeout dependence on sysctl_hung_task_timeout_seconds kunit: allow kunit to be loaded as a module kunit: update documentation to describe module-based build Documentation/dev-tools/kunit/faq.rst | 3 +- Documentation/dev-tools/kunit/index.rst | 3 ++ Documentation/dev-tools/kunit/usage.rst | 16 ++++++++++ fs/ext4/Kconfig | 2 +- fs/ext4/Makefile | 3 +- fs/ext4/inode-test.c | 4 ++- include/kunit/assert.h | 3 +- include/kunit/test.h | 35 ++++++++++++++------ include/kunit/try-catch.h | 10 ------ kernel/sysctl-test.c | 4 ++- lib/Kconfig.debug | 4 +-- lib/kunit/Kconfig | 6 ++-- lib/kunit/Makefile | 14 +++++--- lib/kunit/assert.c | 10 ++++++ lib/kunit/{example-test.c => kunit-example-test.c} | 4 ++- lib/kunit/{test-test.c => kunit-test.c} | 7 ++-- lib/kunit/string-stream-test.c | 5 +-- lib/kunit/string-stream.c | 3 +- {include => lib}/kunit/string-stream.h | 0 lib/kunit/test.c | 25 ++++++++++++++- lib/kunit/try-catch-impl.h | 27 ++++++++++++++++ lib/kunit/try-catch.c | 37 +++++----------------- lib/list-test.c | 4 ++- 23 files changed, 157 insertions(+), 72 deletions(-) rename lib/kunit/{example-test.c => kunit-example-test.c} (97%) rename lib/kunit/{test-test.c => kunit-test.c} (98%) rename {include => lib}/kunit/string-stream.h (100%) create mode 100644 lib/kunit/try-catch-impl.h -- 1.8.3.1

5 years, 11 months

5
12
0 0

[PATCH AUTOSEL 4.4 2/2] rseq/selftests: Turn off timeout setting

by Sasha Levin

From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> [ Upstream commit af9cb29c5488381083b0b5ccdfb3cd931063384a ] As the rseq selftests can run for a long period of time, disable the timeout that the general selftests have. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: "Paul E. McKenney" <paulmck(a)linux.ibm.com> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "H . Peter Anvin" <hpa(a)zytor.com> Cc: Paul Turner <pjt(a)google.com> Cc: Dmitry Vyukov <dvyukov(a)google.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/rseq/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/rseq/settings diff --git a/tools/testing/selftests/rseq/settings b/tools/testing/selftests/rseq/settings new file mode 100644 index 000000000000..e7b9417537fb --- /dev/null +++ b/tools/testing/selftests/rseq/settings @@ -0,0 +1 @@ +timeout=0 -- 2.20.1

5 years, 11 months

1
0
0 0

[PATCH AUTOSEL 4.9 4/4] rseq/selftests: Turn off timeout setting

by Sasha Levin

From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> [ Upstream commit af9cb29c5488381083b0b5ccdfb3cd931063384a ] As the rseq selftests can run for a long period of time, disable the timeout that the general selftests have. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: "Paul E. McKenney" <paulmck(a)linux.ibm.com> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "H . Peter Anvin" <hpa(a)zytor.com> Cc: Paul Turner <pjt(a)google.com> Cc: Dmitry Vyukov <dvyukov(a)google.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/rseq/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/rseq/settings diff --git a/tools/testing/selftests/rseq/settings b/tools/testing/selftests/rseq/settings new file mode 100644 index 000000000000..e7b9417537fb --- /dev/null +++ b/tools/testing/selftests/rseq/settings @@ -0,0 +1 @@ +timeout=0 -- 2.20.1

5 years, 11 months

1
0
0 0

[PATCH AUTOSEL 4.14 4/4] rseq/selftests: Turn off timeout setting

by Sasha Levin

From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> [ Upstream commit af9cb29c5488381083b0b5ccdfb3cd931063384a ] As the rseq selftests can run for a long period of time, disable the timeout that the general selftests have. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: "Paul E. McKenney" <paulmck(a)linux.ibm.com> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "H . Peter Anvin" <hpa(a)zytor.com> Cc: Paul Turner <pjt(a)google.com> Cc: Dmitry Vyukov <dvyukov(a)google.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/rseq/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/rseq/settings diff --git a/tools/testing/selftests/rseq/settings b/tools/testing/selftests/rseq/settings new file mode 100644 index 000000000000..e7b9417537fb --- /dev/null +++ b/tools/testing/selftests/rseq/settings @@ -0,0 +1 @@ +timeout=0 -- 2.20.1

5 years, 11 months

1
0
0 0

[PATCH AUTOSEL 4.19 5/5] rseq/selftests: Turn off timeout setting

by Sasha Levin

From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> [ Upstream commit af9cb29c5488381083b0b5ccdfb3cd931063384a ] As the rseq selftests can run for a long period of time, disable the timeout that the general selftests have. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: "Paul E. McKenney" <paulmck(a)linux.ibm.com> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "H . Peter Anvin" <hpa(a)zytor.com> Cc: Paul Turner <pjt(a)google.com> Cc: Dmitry Vyukov <dvyukov(a)google.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/rseq/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/rseq/settings diff --git a/tools/testing/selftests/rseq/settings b/tools/testing/selftests/rseq/settings new file mode 100644 index 000000000000..e7b9417537fb --- /dev/null +++ b/tools/testing/selftests/rseq/settings @@ -0,0 +1 @@ +timeout=0 -- 2.20.1

5 years, 11 months

1
0
0 0

[PATCH AUTOSEL 4.19 4/5] selftests: firmware: Fix it to do root uid check and skip

by Sasha Levin

From: Shuah Khan <skhan(a)linuxfoundation.org> [ Upstream commit c65e41538b04e0d64a673828745a00cb68a24371 ] firmware attempts to load test modules that require root access and fail. Fix it to check for root uid and exit with skip code instead. Before this fix: selftests: firmware: fw_run_tests.sh modprobe: ERROR: could not insert 'test_firmware': Operation not permitted You must have the following enabled in your kernel: CONFIG_TEST_FIRMWARE=y CONFIG_FW_LOADER=y CONFIG_FW_LOADER_USER_HELPER=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y not ok 1 selftests: firmware: fw_run_tests.sh # SKIP With this fix: selftests: firmware: fw_run_tests.sh skip all tests: must be run as root not ok 1 selftests: firmware: fw_run_tests.sh # SKIP Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Reviwed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/firmware/fw_lib.sh | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh index 1cbb12e284a6..8a853ace55a2 100755 --- a/tools/testing/selftests/firmware/fw_lib.sh +++ b/tools/testing/selftests/firmware/fw_lib.sh @@ -28,6 +28,12 @@ test_modprobe() check_mods() { + local uid=$(id -u) + if [ $uid -ne 0 ]; then + echo "skip all tests: must be run as root" >&2 + exit $ksft_skip + fi + trap "test_modprobe" EXIT if [ ! -d $DIR ]; then modprobe test_firmware -- 2.20.1

5 years, 11 months

1
0
0 0

[PATCH AUTOSEL 5.4 09/10] rseq/selftests: Turn off timeout setting

by Sasha Levin

From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> [ Upstream commit af9cb29c5488381083b0b5ccdfb3cd931063384a ] As the rseq selftests can run for a long period of time, disable the timeout that the general selftests have. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: "Paul E. McKenney" <paulmck(a)linux.ibm.com> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "H . Peter Anvin" <hpa(a)zytor.com> Cc: Paul Turner <pjt(a)google.com> Cc: Dmitry Vyukov <dvyukov(a)google.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/rseq/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/rseq/settings diff --git a/tools/testing/selftests/rseq/settings b/tools/testing/selftests/rseq/settings new file mode 100644 index 000000000000..e7b9417537fb --- /dev/null +++ b/tools/testing/selftests/rseq/settings @@ -0,0 +1 @@ +timeout=0 -- 2.20.1

5 years, 11 months

1
0
0 0

[PATCH AUTOSEL 5.4 08/10] selftests: firmware: Fix it to do root uid check and skip

by Sasha Levin

From: Shuah Khan <skhan(a)linuxfoundation.org> [ Upstream commit c65e41538b04e0d64a673828745a00cb68a24371 ] firmware attempts to load test modules that require root access and fail. Fix it to check for root uid and exit with skip code instead. Before this fix: selftests: firmware: fw_run_tests.sh modprobe: ERROR: could not insert 'test_firmware': Operation not permitted You must have the following enabled in your kernel: CONFIG_TEST_FIRMWARE=y CONFIG_FW_LOADER=y CONFIG_FW_LOADER_USER_HELPER=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y not ok 1 selftests: firmware: fw_run_tests.sh # SKIP With this fix: selftests: firmware: fw_run_tests.sh skip all tests: must be run as root not ok 1 selftests: firmware: fw_run_tests.sh # SKIP Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Reviwed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/firmware/fw_lib.sh | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh index b879305a766d..5b8c0fedee76 100755 --- a/tools/testing/selftests/firmware/fw_lib.sh +++ b/tools/testing/selftests/firmware/fw_lib.sh @@ -34,6 +34,12 @@ test_modprobe() check_mods() { + local uid=$(id -u) + if [ $uid -ne 0 ]; then + echo "skip all tests: must be run as root" >&2 + exit $ksft_skip + fi + trap "test_modprobe" EXIT if [ ! -d $DIR ]; then modprobe test_firmware -- 2.20.1

5 years, 11 months

1
0
0 0

[GIT PULL] Kselftest fixes update for Linux 5.5-rc4

by Shuah Khan

Hi Linus, Please pull the following Kselftest update for Linux 5.5-rc4. This Kselftest update for Linux 5.5-rc4 consists of: -- rseq build failures fixes related to glibc 2.30 compatibility from Mathieu Desnoyers -- Kunit fixes and cleanups from SeongJae Park -- Fixes to filesystems/epoll, firmware, and livepatch build failures and skip handling. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 46cf053efec6a3a5f343fead837777efe8252a46: Linux 5.5-rc3 (2019-12-22 17:02:23 -0800) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-5.5-rc4 for you to fetch changes up to 2a1f40adfb54ca65dc4c93bad444dd23b800a76e: rseq/selftests: Clarify rseq_prepare_unload() helper requirements (2019-12-23 10:52:41 -0700) ---------------------------------------------------------------- linux-kselftest-5.5-rc4 This Kselftest update for Linux 5.5-rc4 consists of: -- rseq build failures fixes related to glibc 2.30 compatibility from Mathieu Desnoyers -- Kunit fixes and cleanups from SeongJae Park -- Fixes to filesystems/epoll, firmware, and livepatch build failures and skip handling. ---------------------------------------------------------------- Mathieu Desnoyers (3): rseq/selftests: Turn off timeout setting rseq/selftests: Fix: Namespace gettid() for compatibility with glibc 2.30 rseq/selftests: Clarify rseq_prepare_unload() helper requirements SeongJae Park (6): docs/kunit/start: Use in-tree 'kunit_defconfig' kunit: Remove duplicated defconfig creation kunit: Create default config in '--build_dir' kunit: Place 'test.log' under the 'build_dir' kunit: Rename 'kunitconfig' to '.kunitconfig' kunit/kunit_tool_test: Test '--build_dir' option run Shuah Khan (3): selftests: filesystems/epoll: fix build error selftests: firmware: Fix it to do root uid check and skip selftests: livepatch: Fix it to do root uid check and skip Documentation/dev-tools/kunit/start.rst | 13 +++++-------- tools/testing/kunit/kunit.py | 18 +++++++++++------- tools/testing/kunit/kunit_kernel.py | 10 +++++----- tools/testing/kunit/kunit_tool_test.py | 10 +++++++++- tools/testing/selftests/filesystems/epoll/Makefile | 2 +- tools/testing/selftests/firmware/fw_lib.sh | 6 ++++++ tools/testing/selftests/livepatch/functions.sh | 15 ++++++++++++++- tools/testing/selftests/livepatch/test-state.sh | 3 +-- tools/testing/selftests/rseq/param_test.c | 18 ++++++++++-------- tools/testing/selftests/rseq/rseq.h | 12 +++++++----- tools/testing/selftests/rseq/settings | 1 + 11 files changed, 70 insertions(+), 38 deletions(-) create mode 100644 tools/testing/selftests/rseq/settings ----------------------------------------------------------------

5 years, 11 months

2
1
0 0

[PATCH AUTOSEL 4.19 26/84] selftests: forwarding: Delete IPv6 address at the end

by Sasha Levin

From: Ido Schimmel <idosch(a)mellanox.com> [ Upstream commit 65cb13986229cec02635a1ecbcd1e2dd18353201 ] When creating the second host in h2_create(), two addresses are assigned to the interface, but only one is deleted. When running the test twice in a row the following error is observed: $ ./router_bridge_vlan.sh TEST: ping [ OK ] TEST: ping6 [ OK ] TEST: vlan [ OK ] $ ./router_bridge_vlan.sh RTNETLINK answers: File exists TEST: ping [ OK ] TEST: ping6 [ OK ] TEST: vlan [ OK ] Fix this by deleting the address during cleanup. Fixes: 5b1e7f9ebd56 ("selftests: forwarding: Test routed bridge interface") Signed-off-by: Ido Schimmel <idosch(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/net/forwarding/router_bridge_vlan.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh b/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh index fef88eb4b873..fa6a88c50750 100755 --- a/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh +++ b/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh @@ -36,7 +36,7 @@ h2_destroy() { ip -6 route del 2001:db8:1::/64 vrf v$h2 ip -4 route del 192.0.2.0/28 vrf v$h2 - simple_if_fini $h2 192.0.2.130/28 + simple_if_fini $h2 192.0.2.130/28 2001:db8:2::2/64 } router_create() -- 2.20.1

5 years, 11 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror