- Linux-kselftest-mirror - lists.linaro.org

[PATCH v1 00/17] kunit: introduce KUnit, the Linux kernel unit testing framework

by Brendan Higgins

This patch set proposes KUnit, a lightweight unit testing and mocking framework for the Linux kernel. Unlike Autotest and kselftest, KUnit is a true unit testing framework; it does not require installing the kernel on a test machine or in a VM and does not require tests to be written in userspace running on a host kernel. Additionally, KUnit is fast: From invocation to completion KUnit can run several dozen tests in under a second. Currently, the entire KUnit test suite for KUnit runs in under a second from the initial invocation (build time excluded). KUnit is heavily inspired by JUnit, Python's unittest.mock, and Googletest/Googlemock for C++. KUnit provides facilities for defining unit test cases, grouping related test cases into test suites, providing common infrastructure for running tests, mocking, spying, and much more. ## What's so special about unit testing? A unit test is supposed to test a single unit of code in isolation, hence the name. There should be no dependencies outside the control of the test; this means no external dependencies, which makes tests orders of magnitudes faster. Likewise, since there are no external dependencies, there are no hoops to jump through to run the tests. Additionally, this makes unit tests deterministic: a failing unit test always indicates a problem. Finally, because unit tests necessarily have finer granularity, they are able to test all code paths easily solving the classic problem of difficulty in exercising error handling code. ## Is KUnit trying to replace other testing frameworks for the kernel? No. Most existing tests for the Linux kernel are end-to-end tests, which have their place. A well tested system has lots of unit tests, a reasonable number of integration tests, and some end-to-end tests. KUnit is just trying to address the unit test space which is currently not being addressed. ## More information on KUnit There is a bunch of documentation near the end of this patch set that describes how to use KUnit and best practices for writing unit tests. For convenience I am hosting the compiled docs here: https://google.github.io/kunit-docs/third_party/kernel/docs/ Additionally for convenience, I have applied these patches to a branch: https://kunit.googlesource.com/linux/+/kunit/rfc/v5.1-rc2/v1 The repo may be cloned with: git clone https://kunit.googlesource.com/linux This patchset is on the kunit/rfc/v5.1-rc2/v1 branch. ## Changes Since Last Version Last version was RFC v4. It seemed we were pretty much done with the RFC phase, so I started the numbering over again. Sorry if anyone finds that confusing. - Reduced usage of object oriented style of member functions as suggested by Frank. - Did a bunch of heavy clean up of the kunit_abort stuff as suggested by Frank and Stephen: - Biggest change was to reduce the usage of direct calls of member functions. - Added a better explanation of what abort is for and further explained the rationale for KUNIT_ASSERT_* vs. KUNIT_EXPECT_* - Dropped BUG() usage - Also moved try_catch interface to a new file since it seemed obscured by being mixed in with the code that used it. - Fixed some other minor issues pointed out by Stephen. - Updated email address of one of the contributors. - Dropped DT unittest port since it seemed like there was a lot more discussion to be had: it wasn't ready to leave the RFC phase. Instead, I added a KUnit test written by Iurii for PROC SYSCTL that was requested by Luis some time ago. For reference, RFC v4 can be found here: https://lkml.org/lkml/2019/2/14/1144 -- 2.21.0.392.gf8f6787159e-goog

6 years, 4 months

2
21
0 0

[PATCH v2 0/8] selftests: Move test output to diagnostic lines

by Kees Cook

This refactors the selftest Makefiles to extract the test running logic to be reused between "run_tests" and "emit_tests", while also fixing up the test output to be TAP version 13 compliant: - added "plan" line - fixed result line syntax - moved all test output to be "# "-prefixed as TAP "diagnostic" lines The prefixing code includes a fallback mode for limited execution environments. Additionally, the plan lines are fixed for all callers of kselftest.h. -Kees v2: - fix external make variable "summary=1" through-out series (shuah) - fix plan line output for all kselftest.h users Kees Cook (8): selftests: Extract single-test shell logic from lib.mk selftests: Use runner.sh for emit targets selftests: Extract logic for multiple test runs selftests: Add plan line and fix result line syntax selftests: Distinguish between missing and non-executable selftests: Move test output to diagnostic lines selftests: Remove KSFT_TAP_LEVEL selftests: Add test plan API to kselftest.h and adjust callers tools/testing/selftests/.gitignore | 1 - tools/testing/selftests/Makefile | 24 ++---- .../selftests/breakpoints/breakpoint_test.c | 15 +++- .../breakpoints/breakpoint_test_arm64.c | 3 +- .../breakpoints/step_after_suspend_test.c | 8 ++ .../selftests/capabilities/test_execve.c | 6 +- .../futex/functional/futex_requeue_pi.c | 1 + .../futex_requeue_pi_mismatched_ops.c | 1 + .../futex_requeue_pi_signal_restart.c | 1 + .../futex_wait_private_mapped_file.c | 1 + .../futex/functional/futex_wait_timeout.c | 1 + .../futex_wait_uninitialized_heap.c | 1 + .../futex/functional/futex_wait_wouldblock.c | 1 + tools/testing/selftests/kselftest.h | 17 +++- tools/testing/selftests/kselftest/prefix.pl | 23 +++++ tools/testing/selftests/kselftest/runner.sh | 86 +++++++++++++++++++ tools/testing/selftests/lib.mk | 64 +++----------- .../selftests/membarrier/membarrier_test.c | 1 + tools/testing/selftests/pidfd/pidfd_test.c | 1 + tools/testing/selftests/sigaltstack/sas.c | 1 + tools/testing/selftests/sync/sync_test.c | 1 + 21 files changed, 178 insertions(+), 80 deletions(-) create mode 100755 tools/testing/selftests/kselftest/prefix.pl create mode 100644 tools/testing/selftests/kselftest/runner.sh -- 2.17.1

6 years, 4 months

2
16
0 0

[PATCH 0/2] seccomp: Make NEW_LISTENER and TSYNC flags exclusive

by Kees Cook

This is just sending out the tweaked fix from Tycho and the selftest changes needed to support it. I intend to send this to Linus directly after it's been in -next for a few days for v5.1 fixes. Thanks! -Kees Kees Cook (1): selftests/seccomp: Prepare for exclusive seccomp flags Tycho Andersen (1): seccomp: Make NEW_LISTENER and TSYNC flags exclusive kernel/seccomp.c | 17 ++++++++-- tools/testing/selftests/seccomp/seccomp_bpf.c | 34 ++++++++++++++----- 2 files changed, 40 insertions(+), 11 deletions(-) -- 2.17.1

6 years, 4 months

3
5
0 0

[PATCH bpf-next v4 5/5] selftests: bpf: test writable buffers in raw tps

by Matt Mullins

This tests that: * a BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE cannot be attached if it uses either: * a variable offset to the tracepoint buffer, or * an offset beyond the size of the tracepoint buffer * a tracer can modify the buffer provided when attached to a writable tracepoint in bpf_prog_test_run Signed-off-by: Matt Mullins <mmullins(a)fb.com> --- include/trace/events/bpf_test_run.h | 50 ++++++++++++ net/bpf/test_run.c | 4 + .../raw_tp_writable_reject_nbd_invalid.c | 42 ++++++++++ .../bpf/prog_tests/raw_tp_writable_test_run.c | 80 +++++++++++++++++++ .../selftests/bpf/verifier/raw_tp_writable.c | 34 ++++++++ 5 files changed, 210 insertions(+) create mode 100644 include/trace/events/bpf_test_run.h create mode 100644 tools/testing/selftests/bpf/prog_tests/raw_tp_writable_reject_nbd_invalid.c create mode 100644 tools/testing/selftests/bpf/prog_tests/raw_tp_writable_test_run.c create mode 100644 tools/testing/selftests/bpf/verifier/raw_tp_writable.c diff --git a/include/trace/events/bpf_test_run.h b/include/trace/events/bpf_test_run.h new file mode 100644 index 000000000000..265447e3f71a --- /dev/null +++ b/include/trace/events/bpf_test_run.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM bpf_test_run + +#if !defined(_TRACE_BPF_TEST_RUN_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_BPF_TEST_RUN_H + +#include <linux/tracepoint.h> + +DECLARE_EVENT_CLASS(bpf_test_finish, + + TP_PROTO(int *err), + + TP_ARGS(err), + + TP_STRUCT__entry( + __field(int, err) + ), + + TP_fast_assign( + __entry->err = *err; + ), + + TP_printk("bpf_test_finish with err=%d", __entry->err) +); + +#ifdef DEFINE_EVENT_WRITABLE +#undef BPF_TEST_RUN_DEFINE_EVENT +#define BPF_TEST_RUN_DEFINE_EVENT(template, call, proto, args, size) \ + DEFINE_EVENT_WRITABLE(template, call, PARAMS(proto), \ + PARAMS(args), size) +#else +#undef BPF_TEST_RUN_DEFINE_EVENT +#define BPF_TEST_RUN_DEFINE_EVENT(template, call, proto, args, size) \ + DEFINE_EVENT(template, call, PARAMS(proto), PARAMS(args)) +#endif + +BPF_TEST_RUN_DEFINE_EVENT(bpf_test_finish, bpf_test_finish, + + TP_PROTO(int *err), + + TP_ARGS(err), + + sizeof(int) +); + +#endif + +/* This part must be outside protection */ +#include <trace/define_trace.h> diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c index fab142b796ef..25e757102595 100644 --- a/net/bpf/test_run.c +++ b/net/bpf/test_run.c @@ -13,6 +13,9 @@ #include <net/sock.h> #include <net/tcp.h> +#define CREATE_TRACE_POINTS +#include <trace/events/bpf_test_run.h> + static int bpf_test_run(struct bpf_prog *prog, void *ctx, u32 repeat, u32 *retval, u32 *time) { @@ -100,6 +103,7 @@ static int bpf_test_finish(const union bpf_attr *kattr, if (err != -ENOSPC) err = 0; out: + trace_bpf_test_finish(&err); return err; } diff --git a/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_reject_nbd_invalid.c b/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_reject_nbd_invalid.c new file mode 100644 index 000000000000..9807336a3016 --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_reject_nbd_invalid.c @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <test_progs.h> +#include <linux/nbd.h> + +void test_raw_tp_writable_reject_nbd_invalid(void) +{ + __u32 duration = 0; + char error[4096]; + int bpf_fd = -1, tp_fd = -1; + + const struct bpf_insn program[] = { + /* r6 is our tp buffer */ + BPF_LDX_MEM(BPF_DW, BPF_REG_6, BPF_REG_1, 0), + /* one byte beyond the end of the nbd_request struct */ + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_6, + sizeof(struct nbd_request)), + BPF_EXIT_INSN(), + }; + + struct bpf_load_program_attr load_attr = { + .prog_type = BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + .license = "GPL v2", + .insns = program, + .insns_cnt = sizeof(program) / sizeof(struct bpf_insn), + .log_level = 2, + }; + + bpf_fd = bpf_load_program_xattr(&load_attr, error, sizeof(error)); + if (CHECK(bpf_fd < 0, "bpf_raw_tracepoint_writable load", + "failed: %d errno %d\n", bpf_fd, errno)) + return; + + tp_fd = bpf_raw_tracepoint_open("nbd_send_request", bpf_fd); + if (CHECK(tp_fd >= 0, "bpf_raw_tracepoint_writable open", + "erroneously succeeded\n")) + goto out_bpffd; + + close(tp_fd); +out_bpffd: + close(bpf_fd); +} diff --git a/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_test_run.c b/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_test_run.c new file mode 100644 index 000000000000..5c45424cac5f --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_test_run.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <test_progs.h> +#include <linux/nbd.h> + +void test_raw_tp_writable_test_run(void) +{ + __u32 duration = 0; + char error[4096]; + + const struct bpf_insn trace_program[] = { + BPF_LDX_MEM(BPF_DW, BPF_REG_6, BPF_REG_1, 0), + BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_6, 0), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_STX_MEM(BPF_W, BPF_REG_6, BPF_REG_0, 0), + BPF_EXIT_INSN(), + }; + + struct bpf_load_program_attr load_attr = { + .prog_type = BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + .license = "GPL v2", + .insns = trace_program, + .insns_cnt = sizeof(trace_program) / sizeof(struct bpf_insn), + .log_level = 2, + }; + + int bpf_fd = bpf_load_program_xattr(&load_attr, error, sizeof(error)); + if (CHECK(bpf_fd < 0, "bpf_raw_tracepoint_writable loaded", + "failed: %d errno %d\n", bpf_fd, errno)) + return; + + const struct bpf_insn skb_program[] = { + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }; + + struct bpf_load_program_attr skb_load_attr = { + .prog_type = BPF_PROG_TYPE_SOCKET_FILTER, + .license = "GPL v2", + .insns = skb_program, + .insns_cnt = sizeof(skb_program) / sizeof(struct bpf_insn), + }; + + int filter_fd = + bpf_load_program_xattr(&skb_load_attr, error, sizeof(error)); + if (CHECK(filter_fd < 0, "test_program_loaded", "failed: %d errno %d\n", + filter_fd, errno)) + goto out_bpffd; + + int tp_fd = bpf_raw_tracepoint_open("bpf_test_finish", bpf_fd); + if (CHECK(tp_fd < 0, "bpf_raw_tracepoint_writable opened", + "failed: %d errno %d\n", tp_fd, errno)) + goto out_filterfd; + + char test_skb[128] = { + 0, + }; + + __u32 prog_ret; + int err = bpf_prog_test_run(filter_fd, 1, test_skb, sizeof(test_skb), 0, + 0, &prog_ret, 0); + CHECK(err != 42, "test_run", + "tracepoint did not modify return value\n"); + CHECK(prog_ret != 0, "test_run_ret", + "socket_filter did not return 0\n"); + + close(tp_fd); + + err = bpf_prog_test_run(filter_fd, 1, test_skb, sizeof(test_skb), 0, 0, + &prog_ret, 0); + CHECK(err != 0, "test_run_notrace", + "test_run failed with %d errno %d\n", err, errno); + CHECK(prog_ret != 0, "test_run_ret_notrace", + "socket_filter did not return 0\n"); + +out_filterfd: + close(filter_fd); +out_bpffd: + close(bpf_fd); +} diff --git a/tools/testing/selftests/bpf/verifier/raw_tp_writable.c b/tools/testing/selftests/bpf/verifier/raw_tp_writable.c new file mode 100644 index 000000000000..95b5d70a1dc1 --- /dev/null +++ b/tools/testing/selftests/bpf/verifier/raw_tp_writable.c @@ -0,0 +1,34 @@ +{ + "raw_tracepoint_writable: reject variable offset", + .insns = { + /* r6 is our tp buffer */ + BPF_LDX_MEM(BPF_DW, BPF_REG_6, BPF_REG_1, 0), + + BPF_LD_MAP_FD(BPF_REG_1, 0), + /* move the key (== 0) to r10-8 */ + BPF_MOV32_IMM(BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_2, BPF_REG_0, 0), + /* lookup in the map */ + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, + BPF_FUNC_map_lookup_elem), + + /* exit clean if null */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), + BPF_EXIT_INSN(), + + /* shift the buffer pointer to a variable location */ + BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_0, 0), + BPF_ALU64_REG(BPF_ADD, BPF_REG_6, BPF_REG_0), + /* clobber whatever's there */ + BPF_MOV64_IMM(BPF_REG_7, 4242), + BPF_STX_MEM(BPF_DW, BPF_REG_6, BPF_REG_7, 0), + + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_hash_8b = { 1, }, + .prog_type = BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + .errstr = "R6 invalid variable buffer offset: off=0, var_off=(0x0; 0xffffffff)", +}, -- 2.17.1

6 years, 4 months

2
1
0 0

[RFC PATCH for 5.2 08/10] rseq/selftests: aarch64 code signature: handle big-endian environment

by Mathieu Desnoyers

Handle compiling with -mbig-endian on aarch64, which generates binaries with mixed code vs data endianness (little endian code, big endian data). Else mismatch between code endianness for the generated signatures and data endianness for the RSEQ_SIG parameter passed to the rseq registration will trigger application segmentation faults when the kernel try to abort rseq critical sections. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> CC: Peter Zijlstra <peterz(a)infradead.org> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Joel Fernandes <joelaf(a)google.com> CC: Catalin Marinas <catalin.marinas(a)arm.com> CC: Dave Watson <davejwatson(a)fb.com> CC: Will Deacon <will.deacon(a)arm.com> CC: Shuah Khan <shuah(a)kernel.org> CC: Andi Kleen <andi(a)firstfloor.org> CC: linux-kselftest(a)vger.kernel.org CC: "H . Peter Anvin" <hpa(a)zytor.com> CC: Chris Lameter <cl(a)linux.com> CC: Russell King <linux(a)arm.linux.org.uk> CC: Michael Kerrisk <mtk.manpages(a)gmail.com> CC: "Paul E . McKenney" <paulmck(a)linux.vnet.ibm.com> CC: Paul Turner <pjt(a)google.com> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: Josh Triplett <josh(a)joshtriplett.org> CC: Steven Rostedt <rostedt(a)goodmis.org> CC: Ben Maurer <bmaurer(a)fb.com> CC: linux-api(a)vger.kernel.org CC: Andy Lutomirski <luto(a)amacapital.net> CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Linus Torvalds <torvalds(a)linux-foundation.org> --- tools/testing/selftests/rseq/rseq-arm64.h | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq-arm64.h b/tools/testing/selftests/rseq/rseq-arm64.h index b41a2a48e965..200dae9e4208 100644 --- a/tools/testing/selftests/rseq/rseq-arm64.h +++ b/tools/testing/selftests/rseq/rseq-arm64.h @@ -6,7 +6,20 @@ * (C) Copyright 2018 - Will Deacon <will.deacon(a)arm.com> */ -#define RSEQ_SIG 0xd428bc00 /* BRK #0x45E0 */ +/* + * aarch64 -mbig-endian generates mixed endianness code vs data: + * little-endian code and big-endian data. Ensure the RSEQ_SIG signature + * matches code endianness. + */ +#define RSEQ_SIG_CODE 0xd428bc00 /* BRK #0x45E0. */ + +#ifdef __AARCH64EB__ +#define RSEQ_SIG_DATA 0x00bc28d4 /* BRK #0x45E0. */ +#else +#define RSEQ_SIG_DATA RSEQ_SIG_CODE +#endif + +#define RSEQ_SIG RSEQ_SIG_DATA #define rseq_smp_mb() __asm__ __volatile__ ("dmb ish" ::: "memory") #define rseq_smp_rmb() __asm__ __volatile__ ("dmb ishld" ::: "memory") @@ -121,7 +134,7 @@ do { \ #define RSEQ_ASM_DEFINE_ABORT(label, abort_label) \ " b 222f\n" \ - " .inst " __rseq_str(RSEQ_SIG) "\n" \ + " .inst " __rseq_str(RSEQ_SIG_CODE) "\n" \ __rseq_str(label) ":\n" \ " b %l[" __rseq_str(abort_label) "]\n" \ "222:\n" -- 2.11.0

6 years, 4 months

3
7
0 0

[RFC PATCH for 5.2 07/10] rseq/selftests: arm: use udf instruction for RSEQ_SIG

by Mathieu Desnoyers

Use udf as the guard instruction for the restartable sequence abort handler. Previously, the chosen signature was not a valid instruction, based on the assumption that it could always sit in a literal pool. However, there are compilation environments in which literal pools are not availble, for instance execute-only code. Therefore, we need to choose a signature value that is also a valid instruction. Handle compiling with -mbig-endian on ARMv6+, which generates binaries with mixed code vs data endianness (little endian code, big endian data). Else mismatch between code endianness for the generated signatures and data endianness for the RSEQ_SIG parameter passed to the rseq registration will trigger application segmentation faults when the kernel try to abort rseq critical sections. Prior to ARMv6, -mbig-endian generates big-endian code and data, so endianness should not be reversed in that case. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> CC: Peter Zijlstra <peterz(a)infradead.org> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Joel Fernandes <joelaf(a)google.com> CC: Catalin Marinas <catalin.marinas(a)arm.com> CC: Dave Watson <davejwatson(a)fb.com> CC: Will Deacon <will.deacon(a)arm.com> CC: Shuah Khan <shuah(a)kernel.org> CC: Andi Kleen <andi(a)firstfloor.org> CC: linux-kselftest(a)vger.kernel.org CC: "H . Peter Anvin" <hpa(a)zytor.com> CC: Chris Lameter <cl(a)linux.com> CC: Russell King <linux(a)arm.linux.org.uk> CC: Michael Kerrisk <mtk.manpages(a)gmail.com> CC: "Paul E . McKenney" <paulmck(a)linux.vnet.ibm.com> CC: Paul Turner <pjt(a)google.com> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: Josh Triplett <josh(a)joshtriplett.org> CC: Steven Rostedt <rostedt(a)goodmis.org> CC: Ben Maurer <bmaurer(a)fb.com> CC: linux-api(a)vger.kernel.org CC: Andy Lutomirski <luto(a)amacapital.net> CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Linus Torvalds <torvalds(a)linux-foundation.org> --- tools/testing/selftests/rseq/rseq-arm.h | 52 +++++++++++++++++++++++++++++++-- 1 file changed, 50 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq-arm.h b/tools/testing/selftests/rseq/rseq-arm.h index 5f262c54364f..e8ccfc37d685 100644 --- a/tools/testing/selftests/rseq/rseq-arm.h +++ b/tools/testing/selftests/rseq/rseq-arm.h @@ -5,7 +5,54 @@ * (C) Copyright 2016-2018 - Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> */ -#define RSEQ_SIG 0x53053053 +/* + * RSEQ_SIG uses the udf A32 instruction with an uncommon immediate operand + * value 0x5de3. This traps if user-space reaches this instruction by mistake, + * and the uncommon operand ensures the kernel does not move the instruction + * pointer to attacker-controlled code on rseq abort. + * + * The instruction pattern in the A32 instruction set is: + * + * e7f5def3 udf #24035 ; 0x5de3 + * + * This translates to the following instruction pattern in the T16 instruction + * set: + * + * little endian: + * def3 udf #243 ; 0xf3 + * e7f5 b.n <7f5> + * + * pre-ARMv6 big endian code: + * e7f5 b.n <7f5> + * def3 udf #243 ; 0xf3 + * + * ARMv6+ -mbig-endian generates mixed endianness code vs data: little-endian + * code and big-endian data. Ensure the RSEQ_SIG data signature matches code + * endianness. Prior to ARMv6, -mbig-endian generates big-endian code and data + * (which match), so there is no need to reverse the endianness of the data + * representation of the signature. However, the choice between BE32 and BE8 + * is done by the linker, so we cannot know whether code and data endianness + * will be mixed before the linker is invoked. + */ + +#define RSEQ_SIG_CODE 0xe7f5def3 + +#ifndef __ASSEMBLER__ + +#define RSEQ_SIG_DATA \ + ({ \ + int sig; \ + asm volatile ( "b 2f\n\t" \ + "1: .inst " __rseq_str(RSEQ_SIG_CODE) "\n\t" \ + "2:\n\t" \ + "ldr %[sig], 1b\n\t" \ + : [sig] "=r" (sig)); \ + sig; \ + }) + +#define RSEQ_SIG RSEQ_SIG_DATA + +#endif #define rseq_smp_mb() __asm__ __volatile__ ("dmb" ::: "memory", "cc") #define rseq_smp_rmb() __asm__ __volatile__ ("dmb" ::: "memory", "cc") @@ -78,7 +125,8 @@ do { \ __rseq_str(table_label) ":\n\t" \ ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \ - ".word " __rseq_str(RSEQ_SIG) "\n\t" \ + ".arm\n\t" \ + ".inst " __rseq_str(RSEQ_SIG_CODE) "\n\t" \ __rseq_str(label) ":\n\t" \ teardown \ "b %l[" __rseq_str(abort_label) "]\n\t" -- 2.11.0

6 years, 4 months

1
0
0 0

[RFC PATCH for 5.2 05/10] rseq/selftests: x86: use ud1 instruction as RSEQ_SIG opcode

by Mathieu Desnoyers

Use ud1 as the guard instruction for the restartable sequence abort handler. Its benefit compared to nopl is to trap execution if the program ends up trying to execute it by mistake, which makes debugging easier. The 4-byte signature per se is unchanged (it is the instruction operand). Only the opcode is changed from nopl to ud1. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Suggested-by: Peter Zijlstra <peterz(a)infradead.org> CC: Peter Zijlstra <peterz(a)infradead.org> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Joel Fernandes <joelaf(a)google.com> CC: Catalin Marinas <catalin.marinas(a)arm.com> CC: Dave Watson <davejwatson(a)fb.com> CC: Will Deacon <will.deacon(a)arm.com> CC: Shuah Khan <shuah(a)kernel.org> CC: Andi Kleen <andi(a)firstfloor.org> CC: linux-kselftest(a)vger.kernel.org CC: "H . Peter Anvin" <hpa(a)zytor.com> CC: Chris Lameter <cl(a)linux.com> CC: Russell King <linux(a)arm.linux.org.uk> CC: Michael Kerrisk <mtk.manpages(a)gmail.com> CC: "Paul E . McKenney" <paulmck(a)linux.vnet.ibm.com> CC: Paul Turner <pjt(a)google.com> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: Josh Triplett <josh(a)joshtriplett.org> CC: Steven Rostedt <rostedt(a)goodmis.org> CC: Ben Maurer <bmaurer(a)fb.com> CC: linux-api(a)vger.kernel.org CC: Andy Lutomirski <luto(a)amacapital.net> CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Linus Torvalds <torvalds(a)linux-foundation.org> --- tools/testing/selftests/rseq/rseq-x86.h | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq-x86.h b/tools/testing/selftests/rseq/rseq-x86.h index 03095236f6fa..b2da6004fe30 100644 --- a/tools/testing/selftests/rseq/rseq-x86.h +++ b/tools/testing/selftests/rseq/rseq-x86.h @@ -7,6 +7,13 @@ #include <stdint.h> +/* + * RSEQ_SIG is used with the following reserved undefined instructions, which + * trap in user-space: + * + * x86-32: 0f b9 3d 53 30 05 53 ud1 0x53053053,%edi + * x86-64: 0f b9 3d 53 30 05 53 ud1 0x53053053(%rip),%edi + */ #define RSEQ_SIG 0x53053053 /* @@ -88,8 +95,8 @@ do { \ #define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \ ".pushsection __rseq_failure, \"ax\"\n\t" \ - /* Disassembler-friendly signature: nopl <sig>(%rip). */\ - ".byte 0x0f, 0x1f, 0x05\n\t" \ + /* Disassembler-friendly signature: ud1 <sig>(%rip),%edi. */ \ + ".byte 0x0f, 0xb9, 0x3d\n\t" \ ".long " __rseq_str(RSEQ_SIG) "\n\t" \ __rseq_str(label) ":\n\t" \ teardown \ @@ -609,8 +616,8 @@ do { \ #define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \ ".pushsection __rseq_failure, \"ax\"\n\t" \ - /* Disassembler-friendly signature: nopl <sig>. */ \ - ".byte 0x0f, 0x1f, 0x05\n\t" \ + /* Disassembler-friendly signature: ud1 <sig>,%edi. */ \ + ".byte 0x0f, 0xb9, 0x3d\n\t" \ ".long " __rseq_str(RSEQ_SIG) "\n\t" \ __rseq_str(label) ":\n\t" \ teardown \ -- 2.11.0

6 years, 4 months

1
0
0 0

[RFC PATCH for 5.2 04/10] rseq/selftests: s390: use jg instruction for jumps outside of the asm

by Mathieu Desnoyers

The branch target range of the "j" instruction is 64K, which is not enough for the general case. Suggested-by: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Joel Fernandes <joelaf(a)google.com> CC: Peter Zijlstra <peterz(a)infradead.org> CC: Catalin Marinas <catalin.marinas(a)arm.com> CC: Dave Watson <davejwatson(a)fb.com> CC: Will Deacon <will.deacon(a)arm.com> CC: Shuah Khan <shuah(a)kernel.org> CC: Andi Kleen <andi(a)firstfloor.org> CC: linux-kselftest(a)vger.kernel.org CC: "H . Peter Anvin" <hpa(a)zytor.com> CC: Chris Lameter <cl(a)linux.com> CC: Russell King <linux(a)arm.linux.org.uk> CC: Michael Kerrisk <mtk.manpages(a)gmail.com> CC: "Paul E . McKenney" <paulmck(a)linux.vnet.ibm.com> CC: Paul Turner <pjt(a)google.com> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: Josh Triplett <josh(a)joshtriplett.org> CC: Steven Rostedt <rostedt(a)goodmis.org> CC: Ben Maurer <bmaurer(a)fb.com> CC: linux-api(a)vger.kernel.org CC: Andy Lutomirski <luto(a)amacapital.net> CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Linus Torvalds <torvalds(a)linux-foundation.org> --- tools/testing/selftests/rseq/rseq-s390.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq-s390.h b/tools/testing/selftests/rseq/rseq-s390.h index fbb97815d71c..7c4f3a70b6c7 100644 --- a/tools/testing/selftests/rseq/rseq-s390.h +++ b/tools/testing/selftests/rseq/rseq-s390.h @@ -117,14 +117,14 @@ do { \ ".long " __rseq_str(RSEQ_SIG) "\n\t" \ __rseq_str(label) ":\n\t" \ teardown \ - "j %l[" __rseq_str(abort_label) "]\n\t" \ + "jg %l[" __rseq_str(abort_label) "]\n\t" \ ".popsection\n\t" #define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \ ".pushsection __rseq_failure, \"ax\"\n\t" \ __rseq_str(label) ":\n\t" \ teardown \ - "j %l[" __rseq_str(cmpfail_label) "]\n\t" \ + "jg %l[" __rseq_str(cmpfail_label) "]\n\t" \ ".popsection\n\t" static inline __attribute__((always_inline)) -- 2.11.0

6 years, 4 months

1
0
0 0

[RFC PATCH for 5.2 02/10] rseq/selftests: Introduce __rseq_cs_ptr_array, rename __rseq_table to __rseq_cs

by Mathieu Desnoyers

The entries within __rseq_table are aligned on 32 bytes due to linux/rseq.h struct rseq_cs uapi requirements, but the start of the __rseq_table section is not guaranteed to be 32-byte aligned. It can cause padding to be added at the start of the section, which makes it hard to use as an array of items by debuggers. Considering that __rseq_table does not really consist of a table due to the presence of padding, rename this section to __rseq_cs. Create a new __rseq_cs_ptr_array section which contains 64-bit packed pointers to entries within the __rseq_cs section. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Joel Fernandes <joelaf(a)google.com> CC: Peter Zijlstra <peterz(a)infradead.org> CC: Catalin Marinas <catalin.marinas(a)arm.com> CC: Dave Watson <davejwatson(a)fb.com> CC: Will Deacon <will.deacon(a)arm.com> CC: Shuah Khan <shuah(a)kernel.org> CC: Andi Kleen <andi(a)firstfloor.org> CC: linux-kselftest(a)vger.kernel.org CC: "H . Peter Anvin" <hpa(a)zytor.com> CC: Chris Lameter <cl(a)linux.com> CC: Russell King <linux(a)arm.linux.org.uk> CC: Michael Kerrisk <mtk.manpages(a)gmail.com> CC: "Paul E . McKenney" <paulmck(a)linux.vnet.ibm.com> CC: Paul Turner <pjt(a)google.com> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: Josh Triplett <josh(a)joshtriplett.org> CC: Steven Rostedt <rostedt(a)goodmis.org> CC: Ben Maurer <bmaurer(a)fb.com> CC: linux-api(a)vger.kernel.org CC: Andy Lutomirski <luto(a)amacapital.net> CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Linus Torvalds <torvalds(a)linux-foundation.org> --- tools/testing/selftests/rseq/rseq-arm.h | 32 +++++++++++++++++-------------- tools/testing/selftests/rseq/rseq-arm64.h | 9 ++++++--- tools/testing/selftests/rseq/rseq-mips.h | 32 +++++++++++++++++-------------- tools/testing/selftests/rseq/rseq-ppc.h | 22 +++++++++++++-------- tools/testing/selftests/rseq/rseq-s390.h | 18 +++++++++++------ tools/testing/selftests/rseq/rseq-x86.h | 19 ++++++++++++------ 6 files changed, 81 insertions(+), 51 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq-arm.h b/tools/testing/selftests/rseq/rseq-arm.h index 17e8d231943a..5f262c54364f 100644 --- a/tools/testing/selftests/rseq/rseq-arm.h +++ b/tools/testing/selftests/rseq/rseq-arm.h @@ -30,24 +30,28 @@ do { \ #include "rseq-skip.h" #else /* !RSEQ_SKIP_FASTPATH */ -#define __RSEQ_ASM_DEFINE_TABLE(version, flags, start_ip, \ +#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, start_ip, \ post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ + __rseq_str(label) ":\n\t" \ ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".word " __rseq_str(label) "b, 0x0\n\t" \ ".popsection\n\t" -#define RSEQ_ASM_DEFINE_TABLE(start_ip, post_commit_ip, abort_ip) \ - __RSEQ_ASM_DEFINE_TABLE(0x0, 0x0, start_ip, \ +#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ + __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) /* * Exit points of a rseq critical section consist of all instructions outside * of the critical section where a critical section can either branch to or * reach through the normal course of its execution. The abort IP and the - * post-commit IP are already part of the __rseq_table section and should not - * be explicitly defined as additional exit points. Knowing all exit points is + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is * useful to assist debuggers stepping over the critical section. */ #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ @@ -99,7 +103,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) @@ -166,7 +170,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) @@ -237,7 +241,7 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) #endif @@ -292,7 +296,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) @@ -367,7 +371,7 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) @@ -443,7 +447,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) @@ -527,7 +531,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) @@ -651,7 +655,7 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) diff --git a/tools/testing/selftests/rseq/rseq-arm64.h b/tools/testing/selftests/rseq/rseq-arm64.h index 2079f71e0ca2..b41a2a48e965 100644 --- a/tools/testing/selftests/rseq/rseq-arm64.h +++ b/tools/testing/selftests/rseq/rseq-arm64.h @@ -82,13 +82,16 @@ do { \ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, start_ip, \ post_commit_offset, abort_ip) \ - " .pushsection __rseq_table, \"aw\"\n" \ + " .pushsection __rseq_cs, \"aw\"\n" \ " .balign 32\n" \ __rseq_str(label) ":\n" \ " .long " __rseq_str(version) ", " __rseq_str(flags) "\n" \ " .quad " __rseq_str(start_ip) ", " \ __rseq_str(post_commit_offset) ", " \ __rseq_str(abort_ip) "\n" \ + " .popsection\n\t" \ + " .pushsection __rseq_cs_ptr_array, \"aw\"\n" \ + " .quad " __rseq_str(label) "b\n" \ " .popsection\n" #define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ @@ -99,8 +102,8 @@ do { \ * Exit points of a rseq critical section consist of all instructions outside * of the critical section where a critical section can either branch to or * reach through the normal course of its execution. The abort IP and the - * post-commit IP are already part of the __rseq_table section and should not - * be explicitly defined as additional exit points. Knowing all exit points is + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is * useful to assist debuggers stepping over the critical section. */ #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ diff --git a/tools/testing/selftests/rseq/rseq-mips.h b/tools/testing/selftests/rseq/rseq-mips.h index 25d10ff54769..fe3eabcdcbe5 100644 --- a/tools/testing/selftests/rseq/rseq-mips.h +++ b/tools/testing/selftests/rseq/rseq-mips.h @@ -54,26 +54,30 @@ do { \ # error unsupported _MIPS_SZLONG #endif -#define __RSEQ_ASM_DEFINE_TABLE(version, flags, start_ip, \ +#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, start_ip, \ post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ + __rseq_str(label) ":\n\t" \ ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \ LONG " " U32_U64_PAD(__rseq_str(post_commit_offset)) "\n\t" \ LONG " " U32_U64_PAD(__rseq_str(abort_ip)) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(label) "b") "\n\t" \ ".popsection\n\t" -#define RSEQ_ASM_DEFINE_TABLE(start_ip, post_commit_ip, abort_ip) \ - __RSEQ_ASM_DEFINE_TABLE(0x0, 0x0, start_ip, \ +#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ + __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) /* * Exit points of a rseq critical section consist of all instructions outside * of the critical section where a critical section can either branch to or * reach through the normal course of its execution. The abort IP and the - * post-commit IP are already part of the __rseq_table section and should not - * be explicitly defined as additional exit points. Knowing all exit points is + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is * useful to assist debuggers stepping over the critical section. */ #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ @@ -127,7 +131,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) @@ -192,7 +196,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) @@ -261,7 +265,7 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) #endif @@ -316,7 +320,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) @@ -389,7 +393,7 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) @@ -463,7 +467,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) @@ -543,7 +547,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) @@ -664,7 +668,7 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) diff --git a/tools/testing/selftests/rseq/rseq-ppc.h b/tools/testing/selftests/rseq/rseq-ppc.h index 24f95649d71e..9df18487fa9f 100644 --- a/tools/testing/selftests/rseq/rseq-ppc.h +++ b/tools/testing/selftests/rseq/rseq-ppc.h @@ -33,8 +33,8 @@ do { \ #else /* !RSEQ_SKIP_FASTPATH */ /* - * The __rseq_table section can be used by debuggers to better handle - * single-stepping through the restartable critical sections. + * The __rseq_cs_ptr_array and __rseq_cs sections can be used by debuggers to + * better handle single-stepping through the restartable critical sections. */ #ifdef __PPC64__ @@ -46,11 +46,14 @@ do { \ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ __rseq_str(label) ":\n\t" \ ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".quad " __rseq_str(label) "b\n\t" \ ".popsection\n\t" #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ @@ -67,8 +70,8 @@ do { \ * Exit points of a rseq critical section consist of all instructions outside * of the critical section where a critical section can either branch to or * reach through the normal course of its execution. The abort IP and the - * post-commit IP are already part of the __rseq_table section and should not - * be explicitly defined as additional exit points. Knowing all exit points is + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is * useful to assist debuggers stepping over the critical section. */ #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ @@ -85,20 +88,23 @@ do { \ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ __rseq_str(label) ":\n\t" \ ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ /* 32-bit only supported on BE */ \ ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".long 0x0, " __rseq_str(label) "b\n\t" \ ".popsection\n\t" /* * Exit points of a rseq critical section consist of all instructions outside * of the critical section where a critical section can either branch to or * reach through the normal course of its execution. The abort IP and the - * post-commit IP are already part of the __rseq_table section and should not - * be explicitly defined as additional exit points. Knowing all exit points is + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is * useful to assist debuggers stepping over the critical section. */ #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ diff --git a/tools/testing/selftests/rseq/rseq-s390.h b/tools/testing/selftests/rseq/rseq-s390.h index b8b5b6f900af..fbb97815d71c 100644 --- a/tools/testing/selftests/rseq/rseq-s390.h +++ b/tools/testing/selftests/rseq/rseq-s390.h @@ -37,19 +37,22 @@ do { \ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ __rseq_str(label) ":\n\t" \ ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".quad " __rseq_str(label) "b\n\t" \ ".popsection\n\t" /* * Exit points of a rseq critical section consist of all instructions outside * of the critical section where a critical section can either branch to or * reach through the normal course of its execution. The abort IP and the - * post-commit IP are already part of the __rseq_table section and should not - * be explicitly defined as additional exit points. Knowing all exit points is + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is * useful to assist debuggers stepping over the critical section. */ #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ @@ -61,19 +64,22 @@ do { \ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ __rseq_str(label) ":\n\t" \ ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".long 0x0, " __rseq_str(label) "b\n\t" \ ".popsection\n\t" /* * Exit points of a rseq critical section consist of all instructions outside * of the critical section where a critical section can either branch to or * reach through the normal course of its execution. The abort IP and the - * post-commit IP are already part of the __rseq_table section and should not - * be explicitly defined as additional exit points. Knowing all exit points is + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is * useful to assist debuggers stepping over the critical section. */ #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ diff --git a/tools/testing/selftests/rseq/rseq-x86.h b/tools/testing/selftests/rseq/rseq-x86.h index 0668608d3674..03095236f6fa 100644 --- a/tools/testing/selftests/rseq/rseq-x86.h +++ b/tools/testing/selftests/rseq/rseq-x86.h @@ -47,13 +47,17 @@ do { \ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ __rseq_str(label) ":\n\t" \ ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".quad " __rseq_str(label) "b\n\t" \ ".popsection\n\t" + #define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) @@ -62,8 +66,8 @@ do { \ * Exit points of a rseq critical section consist of all instructions outside * of the critical section where a critical section can either branch to or * reach through the normal course of its execution. The abort IP and the - * post-commit IP are already part of the __rseq_table section and should not - * be explicitly defined as additional exit points. Knowing all exit points is + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is * useful to assist debuggers stepping over the critical section. */ #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ @@ -566,11 +570,14 @@ do { \ */ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ __rseq_str(label) ":\n\t" \ ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".long " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".long " __rseq_str(label) "b, 0x0\n\t" \ ".popsection\n\t" #define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ @@ -581,8 +588,8 @@ do { \ * Exit points of a rseq critical section consist of all instructions outside * of the critical section where a critical section can either branch to or * reach through the normal course of its execution. The abort IP and the - * post-commit IP are already part of the __rseq_table section and should not - * be explicitly defined as additional exit points. Knowing all exit points is + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is * useful to assist debuggers stepping over the critical section. */ #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ -- 2.11.0

6 years, 4 months

1
0
0 0

[RFC PATCH for 5.2 01/10] rseq/selftests: Add __rseq_exit_point_array section for debuggers

by Mathieu Desnoyers

Knowing all exit points is useful to assist debuggers stepping over the rseq critical sections without requiring them to disassemble the content of the critical section to figure out the exit points. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Joel Fernandes <joelaf(a)google.com> CC: Peter Zijlstra <peterz(a)infradead.org> CC: Catalin Marinas <catalin.marinas(a)arm.com> CC: Dave Watson <davejwatson(a)fb.com> CC: Will Deacon <will.deacon(a)arm.com> CC: Shuah Khan <shuah(a)kernel.org> CC: Andi Kleen <andi(a)firstfloor.org> CC: linux-kselftest(a)vger.kernel.org CC: "H . Peter Anvin" <hpa(a)zytor.com> CC: Chris Lameter <cl(a)linux.com> CC: Russell King <linux(a)arm.linux.org.uk> CC: Michael Kerrisk <mtk.manpages(a)gmail.com> CC: "Paul E . McKenney" <paulmck(a)linux.vnet.ibm.com> CC: Paul Turner <pjt(a)google.com> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: Josh Triplett <josh(a)joshtriplett.org> CC: Steven Rostedt <rostedt(a)goodmis.org> CC: Ben Maurer <bmaurer(a)fb.com> CC: linux-api(a)vger.kernel.org CC: Andy Lutomirski <luto(a)amacapital.net> CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Linus Torvalds <torvalds(a)linux-foundation.org> --- tools/testing/selftests/rseq/rseq-arm.h | 52 +++++++++++++++++ tools/testing/selftests/rseq/rseq-arm64.h | 52 +++++++++++++++++ tools/testing/selftests/rseq/rseq-mips.h | 53 +++++++++++++++++ tools/testing/selftests/rseq/rseq-ppc.h | 66 ++++++++++++++++++++++ tools/testing/selftests/rseq/rseq-s390.h | 55 ++++++++++++++++++ tools/testing/selftests/rseq/rseq-x86.h | 94 +++++++++++++++++++++++++++++++ 6 files changed, 372 insertions(+) diff --git a/tools/testing/selftests/rseq/rseq-arm.h b/tools/testing/selftests/rseq/rseq-arm.h index 3cea19877227..17e8d231943a 100644 --- a/tools/testing/selftests/rseq/rseq-arm.h +++ b/tools/testing/selftests/rseq/rseq-arm.h @@ -42,6 +42,19 @@ do { \ __RSEQ_ASM_DEFINE_TABLE(0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_table section and should not + * be explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + ".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) ", 0x0\n\t" \ + ".popsection\n\t" + #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ "adr r0, " __rseq_str(cs_label) "\n\t" \ @@ -87,6 +100,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -149,6 +167,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -215,6 +238,9 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -267,6 +293,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -337,6 +368,11 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -408,6 +444,12 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -486,6 +528,11 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif "str %[src], %[rseq_scratch0]\n\t" "str %[dst], %[rseq_scratch1]\n\t" "str %[len], %[rseq_scratch2]\n\t" @@ -605,6 +652,11 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif "str %[src], %[rseq_scratch0]\n\t" "str %[dst], %[rseq_scratch1]\n\t" "str %[len], %[rseq_scratch2]\n\t" diff --git a/tools/testing/selftests/rseq/rseq-arm64.h b/tools/testing/selftests/rseq/rseq-arm64.h index 954f34671ca6..2079f71e0ca2 100644 --- a/tools/testing/selftests/rseq/rseq-arm64.h +++ b/tools/testing/selftests/rseq/rseq-arm64.h @@ -95,6 +95,19 @@ do { \ __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_table section and should not + * be explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + " .pushsection __rseq_exit_point_array, \"aw\"\n" \ + " .quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n" \ + " .popsection\n" + #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ " adrp " RSEQ_ASM_TMP_REG ", " __rseq_str(cs_label) "\n" \ @@ -182,6 +195,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -231,6 +249,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -282,6 +305,9 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -325,6 +351,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -379,6 +410,11 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -433,6 +469,12 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error3]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -490,6 +532,11 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -545,6 +592,11 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) diff --git a/tools/testing/selftests/rseq/rseq-mips.h b/tools/testing/selftests/rseq/rseq-mips.h index 7f48ecf46994..25d10ff54769 100644 --- a/tools/testing/selftests/rseq/rseq-mips.h +++ b/tools/testing/selftests/rseq/rseq-mips.h @@ -68,6 +68,20 @@ do { \ __RSEQ_ASM_DEFINE_TABLE(0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_table section and should not + * be explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(exit_ip)) "\n\t" \ + ".popsection\n\t" + #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ LONG_LA " $4, " __rseq_str(cs_label) "\n\t" \ @@ -114,6 +128,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -174,6 +193,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -238,6 +262,9 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -290,6 +317,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -358,6 +390,11 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -427,6 +464,12 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -501,6 +544,11 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif LONG_S " %[src], %[rseq_scratch0]\n\t" LONG_S " %[dst], %[rseq_scratch1]\n\t" LONG_S " %[len], %[rseq_scratch2]\n\t" @@ -617,6 +665,11 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif LONG_S " %[src], %[rseq_scratch0]\n\t" LONG_S " %[dst], %[rseq_scratch1]\n\t" LONG_S " %[len], %[rseq_scratch2]\n\t" diff --git a/tools/testing/selftests/rseq/rseq-ppc.h b/tools/testing/selftests/rseq/rseq-ppc.h index 52630c9f42be..24f95649d71e 100644 --- a/tools/testing/selftests/rseq/rseq-ppc.h +++ b/tools/testing/selftests/rseq/rseq-ppc.h @@ -63,6 +63,19 @@ do { \ "std %%r17, %[" __rseq_str(rseq_cs) "]\n\t" \ __rseq_str(label) ":\n\t" +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_table section and should not + * be explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + ".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \ + ".popsection\n\t" + #else /* #ifdef __PPC64__ */ #define STORE_WORD "stw " @@ -80,6 +93,20 @@ do { \ ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) "\n\t" \ ".popsection\n\t" +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_table section and should not + * be explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + /* 32-bit only supported on BE */ \ + ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) "\n\t" \ + ".popsection\n\t" + #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ "lis %%r17, (" __rseq_str(cs_label) ")@ha\n\t" \ @@ -169,6 +196,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) /* cmp cpuid */ @@ -224,6 +256,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) /* cmp cpuid */ @@ -286,6 +323,9 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) /* cmp cpuid */ @@ -337,6 +377,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) /* cmp cpuid */ @@ -400,6 +445,11 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) /* cmp cpuid */ @@ -465,6 +515,12 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) /* cmp cpuid */ @@ -532,6 +588,11 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* setup for mempcy */ "mr %%r19, %[len]\n\t" "mr %%r20, %[src]\n\t" @@ -601,6 +662,11 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* setup for mempcy */ "mr %%r19, %[len]\n\t" "mr %%r20, %[src]\n\t" diff --git a/tools/testing/selftests/rseq/rseq-s390.h b/tools/testing/selftests/rseq/rseq-s390.h index 1069e85258ce..b8b5b6f900af 100644 --- a/tools/testing/selftests/rseq/rseq-s390.h +++ b/tools/testing/selftests/rseq/rseq-s390.h @@ -44,6 +44,19 @@ do { \ ".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \ ".popsection\n\t" +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_table section and should not + * be explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + ".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \ + ".popsection\n\t" + #elif __s390__ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ @@ -55,6 +68,19 @@ do { \ ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) "\n\t" \ ".popsection\n\t" +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_table section and should not + * be explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) "\n\t" \ + ".popsection\n\t" + #define LONG_L "l" #define LONG_S "st" #define LONG_LT_R "ltr" @@ -102,6 +128,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -160,6 +191,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -220,6 +256,9 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -268,6 +307,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -339,6 +383,12 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -407,6 +457,11 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif LONG_S " %[src], %[rseq_scratch0]\n\t" LONG_S " %[dst], %[rseq_scratch1]\n\t" LONG_S " %[len], %[rseq_scratch2]\n\t" diff --git a/tools/testing/selftests/rseq/rseq-x86.h b/tools/testing/selftests/rseq/rseq-x86.h index a5341044a2f5..0668608d3674 100644 --- a/tools/testing/selftests/rseq/rseq-x86.h +++ b/tools/testing/selftests/rseq/rseq-x86.h @@ -58,6 +58,19 @@ do { \ __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_table section and should not + * be explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + ".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \ + ".popsection\n\t" + #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ "leaq " __rseq_str(cs_label) "(%%rip), %%rax\n\t" \ @@ -93,6 +106,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) @@ -149,6 +167,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) @@ -207,6 +230,9 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) @@ -251,6 +277,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) @@ -320,6 +351,12 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) @@ -386,6 +423,11 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif "movq %[src], %[rseq_scratch0]\n\t" "movq %[dst], %[rseq_scratch1]\n\t" "movq %[len], %[rseq_scratch2]\n\t" @@ -535,6 +577,19 @@ do { \ __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_table section and should not + * be explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + ".long " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) ", 0x0\n\t" \ + ".popsection\n\t" + #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ "movl $" __rseq_str(cs_label) ", " __rseq_str(rseq_cs) "\n\t" \ @@ -569,6 +624,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) @@ -625,6 +685,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) @@ -683,6 +748,9 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) @@ -727,6 +795,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) @@ -788,6 +861,11 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) @@ -852,6 +930,12 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) @@ -920,6 +1004,11 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif "movl %[src], %[rseq_scratch0]\n\t" "movl %[dst], %[rseq_scratch1]\n\t" "movl %[len], %[rseq_scratch2]\n\t" @@ -1027,6 +1116,11 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif "movl %[src], %[rseq_scratch0]\n\t" "movl %[dst], %[rseq_scratch1]\n\t" "movl %[len], %[rseq_scratch2]\n\t" -- 2.11.0

6 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror