- Linux-kselftest-mirror - lists.linaro.org

[PATCH net-next v2] selftests: net: run groups from fcnal-test in parallel

by Jakub Kicinski

fcnal-test.sh takes almost hour and a half to finish. The tests are already grouped into ipv4, ipv6 and other. Run those groups separately. Reviewed-by: David Ahern <dsahern(a)kernel.org> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- v2: no changes, previous posting had a trivial Makefile conflict v1: https://lore.kernel.org/20250907012116.3315344-2-kuba@kernel.org --- tools/testing/selftests/net/Makefile | 4 +++- tools/testing/selftests/net/fcnal-ipv4.sh | 2 ++ tools/testing/selftests/net/fcnal-ipv6.sh | 2 ++ tools/testing/selftests/net/fcnal-other.sh | 2 ++ tools/testing/selftests/net/fcnal-test.sh | 3 +++ 5 files changed, 12 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/net/fcnal-ipv4.sh create mode 100755 tools/testing/selftests/net/fcnal-ipv6.sh create mode 100755 tools/testing/selftests/net/fcnal-other.sh diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 8c860782f9cd..8270f747ffbc 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -8,11 +8,12 @@ CFLAGS += -I../ TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh netdevice.sh \ rtnetlink.sh xfrm_policy.sh +TEST_PROGS += fcnal-ipv4.sh fcnal-ipv6.sh fcnal-other.sh TEST_PROGS += fib_tests.sh fib-onlink-tests.sh pmtu.sh udpgso.sh ip_defrag.sh TEST_PROGS += udpgso_bench.sh fib_rule_tests.sh msg_zerocopy.sh psock_snd.sh TEST_PROGS += udpgro_bench.sh udpgro.sh test_vxlan_under_vrf.sh reuseport_addr_any.sh TEST_PROGS += test_vxlan_fdb_changelink.sh so_txtime.sh ipv6_flowlabel.sh -TEST_PROGS += tcp_fastopen_backup_key.sh fcnal-test.sh l2tp.sh traceroute.sh +TEST_PROGS += tcp_fastopen_backup_key.sh l2tp.sh traceroute.sh TEST_PROGS += fin_ack_lat.sh fib_nexthop_multiprefix.sh fib_nexthops.sh fib_nexthop_nongw.sh TEST_PROGS += altnames.sh icmp.sh icmp_redirect.sh ip6_gre_headroom.sh TEST_PROGS += route_localnet.sh @@ -127,6 +128,7 @@ TEST_GEN_FILES += $(YNL_GEN_FILES) TEST_GEN_PROGS += $(YNL_GEN_PROGS) TEST_FILES := settings +TEST_FILES += fcnal-test.sh TEST_FILES += in_netns.sh lib.sh setup_loopback.sh setup_veth.sh TEST_GEN_FILES += $(patsubst %.c,%.o,$(wildcard *.bpf.c)) diff --git a/tools/testing/selftests/net/fcnal-ipv4.sh b/tools/testing/selftests/net/fcnal-ipv4.sh new file mode 100755 index 000000000000..82f9c867c3e8 --- /dev/null +++ b/tools/testing/selftests/net/fcnal-ipv4.sh @@ -0,0 +1,2 @@ +#!/bin/sh +./fcnal-test.sh -t ipv4 diff --git a/tools/testing/selftests/net/fcnal-ipv6.sh b/tools/testing/selftests/net/fcnal-ipv6.sh new file mode 100755 index 000000000000..ab1fc7aa3caf --- /dev/null +++ b/tools/testing/selftests/net/fcnal-ipv6.sh @@ -0,0 +1,2 @@ +#!/bin/sh +./fcnal-test.sh -t ipv6 diff --git a/tools/testing/selftests/net/fcnal-other.sh b/tools/testing/selftests/net/fcnal-other.sh new file mode 100755 index 000000000000..a840cf80b32e --- /dev/null +++ b/tools/testing/selftests/net/fcnal-other.sh @@ -0,0 +1,2 @@ +#!/bin/sh +./fcnal-test.sh -t other diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 0e3304d37fd0..49d85d267925 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -4272,6 +4272,7 @@ EOF TESTS_IPV4="ipv4_ping ipv4_tcp ipv4_udp ipv4_bind ipv4_runtime ipv4_netfilter" TESTS_IPV6="ipv6_ping ipv6_tcp ipv6_udp ipv6_bind ipv6_runtime ipv6_netfilter" TESTS_OTHER="use_cases" +# note: each TEST_ group needs a dedicated runner, e.g. fcnal-ipv4.sh PAUSE_ON_FAIL=no PAUSE=no @@ -4302,6 +4303,8 @@ elif [ "$TESTS" = "ipv4" ]; then TESTS="$TESTS_IPV4" elif [ "$TESTS" = "ipv6" ]; then TESTS="$TESTS_IPV6" +elif [ "$TESTS" = "other" ]; then + TESTS="$TESTS_OTHER" fi check_gen_prog "nettest" -- 2.51.0

2 months

2
1
0 0

[PATCH RFC net-next 0/5] selftests: drv-net: Convert XDP program to bpf_dynptr

by Nimrod Oren

Hi all, This series updates the drv-net XDP program used by the new xdp.py selftest to use the bpf_dynptr APIs for packet access. The selftest itself is unchanged. The original program accessed packet headers directly via ctx->data/data_end, implicitly assuming headers are always in the linear region. That assumption is incorrect for multi-buffer XDP and does not hold across all drivers. For example, mlx5 with striding RQ can leave the linear area empty, causing the multi-buffer cases to fail. Switching to bpf_xdp_load/store_bytes would work but always incurs copies. Instead, this series adopts bpf_dynptr, which provides safe, verifier-checked access across both linear and fragmented areas while avoiding copies. Amery Hung has also proposed a series [1] that addresses the same issues in the program, but through the use of bpf_xdp_pull_data. My series is not intended as a replacement for that work, but rather as an exploration of another viable solution, each of which may be preferable under different circumstances. In cases where the program does not return XDP_PASS, I believe dynptr has an advantage since it avoids an extra copy. Conversely, when the program returns XDP_PASS, bpf_xdp_pull_data may be preferable, as the copy will be performed in any case during skb creation. It may make sense to split the work into two separate programs, allowing us to test both solutions independently. Alternatively, we can consider a combined approach, where the more fitting solution is applied for each use case. I welcome feedback on which direction would be most useful. [1] https://lore.kernel.org/all/20250905173352.3759457-1-ameryhung@gmail.com/ Thanks! Nimrod Nimrod Oren (5): selftests: drv-net: Test XDP_TX with bpf_dynptr selftests: drv-net: Test XDP tail adjustment with bpf_dynptr selftests: drv-net: Test XDP head adjustment with bpf_dynptr selftests: drv-net: Adjust XDP header data with bpf_dynptr selftests: drv-net: Check XDP header data with bpf_dynptr .../selftests/net/lib/xdp_native.bpf.c | 219 ++++++++---------- 1 file changed, 96 insertions(+), 123 deletions(-) -- 2.45.0

2 months

3
7
0 0

[PATCH 0/3] selftests: drv-net: Fix issues in devlink_rate_tc_bw.py

by Carolina Jubran

This series fixes issues in devlink_rate_tc_bw.py selftest that made its checks unreliable and its documentation inconsistent with the actual configuration. Thanks Carolina Jubran (3): selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py selftests: drv-net: Relax total BW check in devlink_rate_tc_bw.py .../drivers/net/hw/devlink_rate_tc_bw.py | 102 ++++++++---------- 1 file changed, 44 insertions(+), 58 deletions(-) -- 2.38.1

2 months

3
12
0 0

[PATCH bpf-next v2] selftests/bpf: Fix incorrect array size calculation

by Jiayuan Chen

The loop in bench_sockmap_prog_destroy() has two issues: 1. Using 'sizeof(ctx.fds)' as the loop bound results in the number of bytes, not the number of file descriptors, causing the loop to iterate far more times than intended. 2. The condition 'ctx.fds[0] > 0' incorrectly checks only the first fd for all iterations, potentially leaving file descriptors unclosed. Change it to 'ctx.fds[i] > 0' to check each fd properly. These fixes ensure correct cleanup of all file descriptors when the benchmark exits. Signed-off-by: Jiayuan Chen <jiayuan.chen(a)linux.dev> Reported-by: Dan Carpenter <dan.carpenter(a)linaro.org> Closes: https://lore.kernel.org/bpf/aLqfWuRR9R_KTe5e@stanley.mountain/ --- tools/testing/selftests/bpf/benchs/bench_sockmap.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/benchs/bench_sockmap.c b/tools/testing/selftests/bpf/benchs/bench_sockmap.c index 8ebf563a67a2..cfc072aa7fff 100644 --- a/tools/testing/selftests/bpf/benchs/bench_sockmap.c +++ b/tools/testing/selftests/bpf/benchs/bench_sockmap.c @@ -10,6 +10,7 @@ #include <argp.h> #include "bench.h" #include "bench_sockmap_prog.skel.h" +#include "bpf_util.h" #define FILE_SIZE (128 * 1024) #define DATA_REPEAT_SIZE 10 @@ -124,8 +125,8 @@ static void bench_sockmap_prog_destroy(void) { int i; - for (i = 0; i < sizeof(ctx.fds); i++) { - if (ctx.fds[0] > 0) + for (i = 0; i < ARRAY_SIZE(ctx.fds); i++) { + if (ctx.fds[i] > 0) close(ctx.fds[i]); } -- 2.43.0

2 months

2
1
0 0

[PATCH net 0/2] net: dst_metadata: fix DF flag extraction on tunnel rx

by Ilya Maximets

Two patches here, first fixes the issue where tunnel core doesn't actually extract DF bit from the outer IP header, even though both OVS and TC flower allow matching on it. More details in the commit message. The second is a selftest for openvswitch that reproduces the issue, but also just adds some basic coverage for the tunnel metadata extraction and related openvswitch uAPI. Ilya Maximets (2): net: dst_metadata: fix IP_DF bit not extracted from tunnel headers selftests: openvswitch: add a simple test for tunnel metadata include/net/dst_metadata.h | 11 ++- .../selftests/net/openvswitch/openvswitch.sh | 88 +++++++++++++++++-- 2 files changed, 90 insertions(+), 9 deletions(-) -- 2.50.1

2 months

3
5
0 0

[ANNOUNCE/CFP] Kernel Testing & Dependability Micro-conference at LPC Japan 2025 CFP postponed until 30th September

by Arisu Tachibana

Hello everyone, The Call For Proposal (CFP) for the Kernel Testing & Dependability Micro-Conference at Linux Plumbers 2025 has been updated. https://lpc.events/event/19/contributions/2001/ You still have time until the 30th September for sending your CFP: https://lpc.events/event/19/abstracts/ Thanks, Arisu & Guillaume & Shuah & Sasha

2 months

1
0
0 0

[PATCH net-next v6] selftests: net: add test for ipv6 fragmentation

by Brett A C Sheffield

Add selftest for the IPv6 fragmentation regression which affected several stable kernels. Commit a18dfa9925b9 ("ipv6: save dontfrag in cork") was backported to stable without some prerequisite commits. This caused a regression when sending IPv6 UDP packets by preventing fragmentation and instead returning -1 (EMSGSIZE). Add selftest to check for this issue by attempting to send a packet larger than the interface MTU. The packet will be fragmented on a working kernel, with sendmsg(2) correctly returning the expected number of bytes sent. When the regression is present, sendmsg returns -1 and sets errno to EMSGSIZE. Link: https://lore.kernel.org/stable/aElivdUXqd1OqgMY@karahi.gladserv.com Signed-off-by: Brett A C Sheffield <bacs(a)librecast.net> Reviewed-by: Willem de Bruijn <willemb(a)google.com> --- Thanks again Willem for the review. v6 changes: - port -> network byte order - remove unecessary variable err - check return value of close() v5 changes: - disable_dad: delete - not needed for lo - main: simplify failure paths - main: char -> static char buf - setup: remove pointless return value - setup: remove unused variable fd - setup: merge with interface_up() to simplify - setup: check all system call return values - remove no longer used headers v4 changes: - fix "else should follow close brace" (checkpatch ERROR) v3 changes: - add usleep instead of busy polling on sendmsg - simplify error handling by using error() and leaving cleanup to O/S - use loopback interface - don't bother creating TAP - send to localhost (::1) v2 changes: - remove superfluous namespace calls - unshare(2) suffices - remove usleep(). Don't wait for the interface to be ready, just send, and handle the (less likely) error case by retrying. - set destination address only once - document our use of the IPv6 link-local source address - send to port 9 (DISCARD) instead of 4242 (DONT PANIC) - ensure sockets are closed on failure paths - use KSFT exit codes for clarity v5: https://lore.kernel.org/netdev/20250902142502.27278-1-bacs@librecast.net v4: https://lore.kernel.org/netdev/20250901123757.13112-1-bacs@librecast.net v3: https://lore.kernel.org/netdev/20250901112248.5218-1-bacs@librecast.net v2: https://lore.kernel.org/netdev/20250831102908.14655-1-bacs@librecast.net v1: https://lore.kernel.org/netdev/20250825092548.4436-3-bacs@librecast.net tools/testing/selftests/net/.gitignore | 1 + tools/testing/selftests/net/Makefile | 1 + .../selftests/net/ipv6_fragmentation.c | 114 ++++++++++++++++++ 3 files changed, 116 insertions(+) create mode 100644 tools/testing/selftests/net/ipv6_fragmentation.c diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index 47c293c2962f..3d4b4a53dfda 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -16,6 +16,7 @@ ip_local_port_range ipsec ipv6_flowlabel ipv6_flowlabel_mgr +ipv6_fragmentation log.txt msg_oob msg_zerocopy diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index eef0b8f8a7b0..276e0481d996 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -117,6 +117,7 @@ TEST_GEN_FILES += tfo TEST_PROGS += tfo_passive.sh TEST_PROGS += broadcast_pmtu.sh TEST_PROGS += ipv6_force_forwarding.sh +TEST_GEN_PROGS += ipv6_fragmentation TEST_PROGS += route_hint.sh # YNL files, must be before "include ..lib.mk" diff --git a/tools/testing/selftests/net/ipv6_fragmentation.c b/tools/testing/selftests/net/ipv6_fragmentation.c new file mode 100644 index 000000000000..267ef62b5c72 --- /dev/null +++ b/tools/testing/selftests/net/ipv6_fragmentation.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Author: Brett A C Sheffield <bacs(a)librecast.net> + * + * Kernel selftest for the IPv6 fragmentation regression which affected stable + * kernels: + * + * https://lore.kernel.org/stable/aElivdUXqd1OqgMY@karahi.gladserv.com + * + * Commit: a18dfa9925b9 ("ipv6: save dontfrag in cork") was backported to stable + * without some prerequisite commits. + * + * This caused a regression when sending IPv6 UDP packets by preventing + * fragmentation and instead returning -1 (EMSGSIZE). + * + * This selftest demonstrates the issue by sending an IPv6 UDP packet to + * localhost (::1) on the loopback interface from the autoconfigured link-local + * address. + * + * sendmsg(2) returns bytes sent correctly on a working kernel, and returns -1 + * (EMSGSIZE) when the regression is present. + * + * The regression was not present in the mainline kernel, but add this test to + * catch similar breakage in future. + */ + +#define _GNU_SOURCE + +#include <error.h> +#include <net/if.h> +#include <netinet/in.h> +#include <sched.h> +#include <stdio.h> +#include <sys/ioctl.h> +#include <sys/socket.h> +#include <unistd.h> +#include "../kselftest.h" + +#define MTU 1500 +#define LARGER_THAN_MTU 8192 + +static void setup(void) +{ + struct ifreq ifr = { + .ifr_name = "lo" + }; + int ctl; + + /* we need to set MTU, so do this in a namespace to play nicely */ + if (unshare(CLONE_NEWNET) == -1) + error(KSFT_FAIL, errno, "unshare"); + + ctl = socket(AF_LOCAL, SOCK_STREAM, 0); + if (ctl == -1) + error(KSFT_FAIL, errno, "socket"); + + /* ensure MTU is smaller than what we plan to send */ + ifr.ifr_mtu = MTU; + if (ioctl(ctl, SIOCSIFMTU, &ifr) == -1) + error(KSFT_FAIL, errno, "ioctl: set MTU"); + + /* bring up interface */ + if (ioctl(ctl, SIOCGIFFLAGS, &ifr) == -1) + error(KSFT_FAIL, errno, "ioctl SIOCGIFFLAGS"); + ifr.ifr_flags = ifr.ifr_flags | IFF_UP; + if (ioctl(ctl, SIOCSIFFLAGS, &ifr) == -1) + error(KSFT_FAIL, errno, "ioctl: bring interface up"); + + if (close(ctl) == -1) + error(KSFT_FAIL, errno, "close"); +} + +int main(void) +{ + struct in6_addr addr = { + .s6_addr[15] = 0x01, /* ::1 */ + }; + struct sockaddr_in6 sa = { + .sin6_family = AF_INET6, + .sin6_addr = addr, + .sin6_port = htons(9) /* port 9/udp (DISCARD) */ + }; + static char buf[LARGER_THAN_MTU] = {0}; + struct iovec iov = { .iov_base = buf, .iov_len = sizeof(buf) }; + struct msghdr msg = { + .msg_iov = &iov, + .msg_iovlen = 1, + .msg_name = (struct sockaddr *)&sa, + .msg_namelen = sizeof(sa), + }; + ssize_t rc; + int s; + + printf("Testing IPv6 fragmentation\n"); + setup(); + s = socket(AF_INET6, SOCK_DGRAM, 0); +send_again: + rc = sendmsg(s, &msg, 0); + if (rc == -1) { + /* if interface wasn't ready, try again */ + if (errno == EADDRNOTAVAIL) { + usleep(1000); + goto send_again; + } + error(KSFT_FAIL, errno, "sendmsg"); + } else if (rc != LARGER_THAN_MTU) { + error(KSFT_FAIL, errno, "sendmsg returned %zi, expected %i", + rc, LARGER_THAN_MTU); + } + printf("[PASS] sendmsg() returned %zi\n", rc); + if (close(s) == -1) + error(KSFT_FAIL, errno, "close"); + return KSFT_PASS; +} base-commit: cd8a4cfa6bb43a441901e82f5c222dddc75a18a3 -- 2.49.1

2 months

2
1
0 0

[PATCHv5 net-next 0/3] bonding: support aggregator selection based on port priority

by Hangbin Liu

This patchset introduces a new per-port bonding option: `ad_actor_port_prio`. It allows users to configure the actor's port priority, which can then be used by the bonding driver for aggregator selection based on port priority. This provides finer control over LACP aggregator choice, especially in setups with multiple eligible aggregators over 2 switches. v5: a) rename 'prio' to 'actor_port_prio' in bond_ad_select_tbl (Jay Vosburgh) b) update document description v4: a) fix actor_port_prio minimal value (Jay Vosburgh) b) fix ad_agg_selection_test comment order (Paolo Abeni) c) restruct selftest, reduce duplication (Paolo Abeni) v3: a) add comments when init slave port_priority (Jonas Gorski) b) rename ad_lacp_port_prio to lacp_port_prio (Jay Vosburgh) v2: a) set default bond option value for port priority (Nikolay Aleksandrov) b) fix __agg_ports_priority coding style (Nikolay Aleksandrov) c) fix shellcheck warns Hangbin Liu (3): bonding: add support for per-port LACP actor priority bonding: support aggregator selection based on port priority selftests: bonding: add test for LACP actor port priority Documentation/networking/bonding.rst | 25 +++- drivers/net/bonding/bond_3ad.c | 31 +++++ drivers/net/bonding/bond_netlink.c | 16 +++ drivers/net/bonding/bond_options.c | 45 +++++++- include/net/bond_3ad.h | 2 + include/net/bond_options.h | 1 + include/uapi/linux/if_link.h | 1 + .../selftests/drivers/net/bonding/Makefile | 3 +- .../drivers/net/bonding/bond_lacp_prio.sh | 108 ++++++++++++++++++ tools/testing/selftests/net/forwarding/lib.sh | 24 ---- tools/testing/selftests/net/lib.sh | 24 ++++ 11 files changed, 247 insertions(+), 33 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh -- 2.50.1

2 months

2
4
0 0

[PATCH] selftests/kselftest_harness: Add harness-selftest.expected to TEST_FILES

by Yi Lai

The harness-selftest.expected is not installed in INSTALL_PATH. Attempting to execute harness-selftest.sh shows warning: diff: ./kselftest_harness/harness-selftest.expected: No such file or directory Add harness-selftest.expected to TEST_FILES. Signed-off-by: Yi Lai <yi1.lai(a)intel.com> --- tools/testing/selftests/kselftest_harness/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/kselftest_harness/Makefile b/tools/testing/selftests/kselftest_harness/Makefile index 0617535a6ce4..d2369c01701a 100644 --- a/tools/testing/selftests/kselftest_harness/Makefile +++ b/tools/testing/selftests/kselftest_harness/Makefile @@ -2,6 +2,7 @@ TEST_GEN_PROGS_EXTENDED := harness-selftest TEST_PROGS := harness-selftest.sh +TEST_FILES := harness-selftest.expected EXTRA_CLEAN := harness-selftest.seen include ../lib.mk -- 2.43.0

2 months

4
3
0 0

[PATCH v2 0/3] Fix va_high_addr_switch.sh test failure

by Chunyu Hu

The three patches fix the va_high_addr_switch.sh test failure on x86_64. Patch 1 fixes the hugepage setup issue that nr_hugepages is reset too early in run_vmtests.sh and break the later va_high_addr_switch testing. Patch 2 adds hugepage setup in va_high_addr_switch test, so that it can still work if vm_runtests.sh changes the hugepage setup someday. Patch 3 fixes the test failure caused by the hint addr align method change in hugetlb_get_unmapped_area(). Changes in v2: - patch 1 renames nr_hugepgs_origin to orig_nr_hugepgs - add a patch 2 to setup hugeapges in va_high_addr_switch test Chunyu Hu (3): selftests/mm: fix hugepages cleanup too early selftests/mm: alloc hugepages in va_high_addr_switch test selftests/mm: fix va_high_addr_switch.sh failure on x86_64 tools/testing/selftests/mm/run_vmtests.sh | 9 ++++- .../selftests/mm/va_high_addr_switch.c | 4 +- .../selftests/mm/va_high_addr_switch.sh | 37 +++++++++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) -- 2.49.0

2 months

2
6
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror