- Linux-kselftest-mirror - lists.linaro.org

[REGRESSION] 5.16rc1: SA_IMMUTABLE breaks debuggers

by Kyle Huey

rr, a userspace record and replay debugger[0], is completely broken on 5.16rc1. I bisected this to 00b06da29cf9dc633cdba87acd3f57f4df3fd5c7. That patch makes two changes, it blocks sigaction from changing signal handlers once the kernel has decided to force the program to take a signal and it also stops notifying ptracers of the signal in the same circumstances. The latter behavior is just wrong. There's no reason that ptrace should not be able to observe and even change (non-SIGKILL) forced signals. It should be reverted. This behavior change is also observable in gdb. If you take a program that sets SIGSYS to SIG_IGN and then raises a SIGSYS via SECCOMP_RET_TRAP and run it under gdb on a good kernel gdb will stop when the SIGSYS is raised, let you inspect program state, etc. After the SA_IMMUTABLE change gdb won't stop until the program has already died of SIGSYS. - Kyle [0] https://rr-project.org/

3 years, 10 months

5
29
0 0

[PATCH bpf] selfetests/bpf: Adapt vmtest.sh to s390 libbpf CI changes

by Ilya Leoshkevich

[1] added s390 support to libbpf CI and added an ${ARCH} prefix to a number of paths and identifiers in libbpf GitHub repo, which vmtest.sh relies upon. Update these and make use of the new s390 support. [1] https://github.com/libbpf/libbpf/pull/204 Co-developed-by: Andrii Nakryiko <andrii(a)kernel.org> Signed-off-by: Andrii Nakryiko <andrii(a)kernel.org> Signed-off-by: Ilya Leoshkevich <iii(a)linux.ibm.com> --- tools/testing/selftests/bpf/vmtest.sh | 46 ++++++++++++++++++--------- 1 file changed, 31 insertions(+), 15 deletions(-) diff --git a/tools/testing/selftests/bpf/vmtest.sh b/tools/testing/selftests/bpf/vmtest.sh index 027198768fad..5e43c79ddc6e 100755 --- a/tools/testing/selftests/bpf/vmtest.sh +++ b/tools/testing/selftests/bpf/vmtest.sh @@ -4,17 +4,34 @@ set -u set -e -# This script currently only works for x86_64, as -# it is based on the VM image used by the BPF CI which is -# x86_64. -QEMU_BINARY="${QEMU_BINARY:="qemu-system-x86_64"}" -X86_BZIMAGE="arch/x86/boot/bzImage" +# This script currently only works for x86_64 and s390x, as +# it is based on the VM image used by the BPF CI, which is +# available only for these architectures. +ARCH="$(uname -m)" +case "${ARCH}" in +s390x) + QEMU_BINARY=qemu-system-s390x + QEMU_CONSOLE="ttyS1" + QEMU_FLAGS=(-smp 2) + BZIMAGE="arch/s390/boot/compressed/vmlinux" + ;; +x86_64) + QEMU_BINARY=qemu-system-x86_64 + QEMU_CONSOLE="ttyS0,115200" + QEMU_FLAGS=(-cpu host -smp 8) + BZIMAGE="arch/x86/boot/bzImage" + ;; +*) + echo "Unsupported architecture" + exit 1 + ;; +esac DEFAULT_COMMAND="./test_progs" MOUNT_DIR="mnt" ROOTFS_IMAGE="root.img" OUTPUT_DIR="$HOME/.bpf_selftests" -KCONFIG_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/con…" -KCONFIG_API_URL="https://api.github.com/repos/libbpf/libbpf/contents/travis-ci/vmtest/config…" +KCONFIG_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/con…" +KCONFIG_API_URL="https://api.github.com/repos/libbpf/libbpf/contents/travis-ci/vmtest/config…" INDEX_URL="https://raw.githubusercontent.com/libbpf/libbpf/master/travis-ci/vmtest/con…" NUM_COMPILE_JOBS="$(nproc)" LOG_FILE_BASE="$(date +"bpf_selftests.%Y-%m-%d_%H-%M-%S")" @@ -85,7 +102,7 @@ newest_rootfs_version() { { for file in "${!URLS[@]}"; do - if [[ $file =~ ^libbpf-vmtest-rootfs-(.*)\.tar\.zst$ ]]; then + if [[ $file =~ ^"${ARCH}"/libbpf-vmtest-rootfs-(.*)\.tar\.zst$ ]]; then echo "${BASH_REMATCH[1]}" fi done @@ -102,7 +119,7 @@ download_rootfs() exit 1 fi - download "libbpf-vmtest-rootfs-$rootfsversion.tar.zst" | + download "${ARCH}/libbpf-vmtest-rootfs-$rootfsversion.tar.zst" | zstd -d | sudo tar -C "$dir" -x } @@ -224,13 +241,12 @@ EOF -nodefaults \ -display none \ -serial mon:stdio \ - -cpu host \ + "${qemu_flags[@]}" \ -enable-kvm \ - -smp 8 \ -m 4G \ -drive file="${rootfs_img}",format=raw,index=1,media=disk,if=virtio,cache=none \ -kernel "${kernel_bzimage}" \ - -append "root=/dev/vda rw console=ttyS0,115200" + -append "root=/dev/vda rw console=${QEMU_CONSOLE}" } copy_logs() @@ -282,7 +298,7 @@ main() local kernel_checkout=$(realpath "${script_dir}"/../../../../) # By default the script searches for the kernel in the checkout directory but # it also obeys environment variables O= and KBUILD_OUTPUT= - local kernel_bzimage="${kernel_checkout}/${X86_BZIMAGE}" + local kernel_bzimage="${kernel_checkout}/${BZIMAGE}" local command="${DEFAULT_COMMAND}" local update_image="no" local exit_command="poweroff -f" @@ -337,13 +353,13 @@ main() if is_rel_path "${O}"; then O="$(realpath "${PWD}/${O}")" fi - kernel_bzimage="${O}/${X86_BZIMAGE}" + kernel_bzimage="${O}/${BZIMAGE}" make_command="${make_command} O=${O}" elif [[ "${KBUILD_OUTPUT:=""}" != "" ]]; then if is_rel_path "${KBUILD_OUTPUT}"; then KBUILD_OUTPUT="$(realpath "${PWD}/${KBUILD_OUTPUT}")" fi - kernel_bzimage="${KBUILD_OUTPUT}/${X86_BZIMAGE}" + kernel_bzimage="${KBUILD_OUTPUT}/${BZIMAGE}" make_command="${make_command} KBUILD_OUTPUT=${KBUILD_OUTPUT}" fi -- 2.31.1

3 years, 10 months

4
3
0 0

Re: Re: [PATCH 5.10 000/578] 5.10.80-rc2 review

by Naresh Kamboju

+ Kernel Selftest + Anders Hi Tim, Thanks for your email. On Wed, 17 Nov 2021 at 20:07, Tim Lewis <elatllat(a)gmail.com> wrote: > > > No regressions on arm64, arm, x86_64, and i386. > > I got > proc-uptime-001: proc-uptime-001.c:39: main: Assertion `i1 >= i0' failed. It is a known intermittent failure due to test running more than expected time and runner script killed it. I have noticed intermittent failures on slow devices. You can see the history of the test case on Linux next here intermittently failing. I do compare between the stable-rc branches, Linux mainline and next. https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20210924/te… > I don't see proc-uptime-001 on > https://github.com/Linaro/test-definitions/blob/master/automated/linux/ksel… We will add this as known intermittent failure. It would be great if we report this to the test author and ask them to review the test case for the reason for long run time on slow devices. > > my proc-uptime-001 history In general when a test fails, Please re-run the test independently for 10 times or more on the same kernel / device before we report it as regression. > 5.10.80-rc2-dirty:not ok 10 selftests: proc: proc-uptime-001 # exit=134 exit=134 which means Aborted. When the test runs more than X time (45 sec i guess) the script will be killed by the runner script. > 5.10.80-rc1-dirty:ok 10 selftests: proc: proc-uptime-001 This test log details gives more insight that the test was timeout and Aborted. Test output log: -------------------- # selftests: proc: proc-uptime-001 [ 43.200262] audit: type=1701 audit(1618432600.255:6): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=11758 comm=\"proc-uptime-001\" exe=\"/opt/kselftest_intree/proc/proc-uptime-001\" sig=6 res=1 # proc-uptime-001: proc-uptime-001.c:39: main: Assertion `i1 >= i0' failed. # /usr/bin/tim[ 43.224097] audit: type=1701 audit(1618432600.259:7): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=11756 comm=\"timeout\" exe=\"/usr/bin/timeout.coreutils\" sig=6 res=1 eout: the monitored command dumped core # ./kselftest/runner.sh: line 33: 11756 Aborted /usr/bin/timeout --foreground \"$kselftest_timeout\" \"$1\" not ok 11 selftests: proc: proc-uptime-001 # exit=134 However, It is good to find that system running slowly. - Naresh

3 years, 10 months

2
1
0 0

[PATCH bpf] selftests: bpf: check map in map pruning

by Lorenz Bauer

Ensure that two registers with a map_value loaded from a nested map are considered equivalent for the purpose of state pruning and don't cause the verifier to revisit a pruning point. This uses a rather crude match on the number of insns visited by the verifier, which might change in the future. I've therefore tried to keep the code as "unpruneable" as possible by having the code paths only converge on the second to last instruction. Should you require to adjust the test in the future, reducing the number of processed instructions should always be safe. Increasing them could cause another regression, so proceed with caution. Suggested-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Lorenz Bauer <lmb(a)cloudflare.com> Link: https://lore.kernel.org/bpf/CACAyw99hVEJFoiBH_ZGyy=+oO-jyydoz6v1DeKPKs2HVsU… --- .../selftests/bpf/verifier/map_in_map.c | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/tools/testing/selftests/bpf/verifier/map_in_map.c b/tools/testing/selftests/bpf/verifier/map_in_map.c index 2798927ee9ff..f46c7121e216 100644 --- a/tools/testing/selftests/bpf/verifier/map_in_map.c +++ b/tools/testing/selftests/bpf/verifier/map_in_map.c @@ -18,6 +18,39 @@ .fixup_map_in_map = { 3 }, .result = ACCEPT, }, +{ + "map in map state pruning", + .insns = { + BPF_ST_MEM(0, BPF_REG_10, -4, 0), + BPF_MOV64_REG(BPF_REG_6, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_6, -4), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_6), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), + BPF_EXIT_INSN(), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_6), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 11), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_6), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), + BPF_EXIT_INSN(), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_6), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), + BPF_EXIT_INSN(), + BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_in_map = { 4, 14 }, + .flags = BPF_F_TEST_STATE_FREQ, + .result = VERBOSE_ACCEPT, + .errstr = "processed 25 insns", +}, { "invalid inner map pointer", .insns = { -- 2.32.0

3 years, 10 months

6
9
0 0

[PATCH] selftests/bpf: fix array_size.cocci warning:

by Guo Zhengkui

Use ARRAY_SIZE() because it uses __must_be_array(arr) to make sure arr is really an array. Signed-off-by: Guo Zhengkui <guozhengkui(a)vivo.com> --- .../testing/selftests/bpf/prog_tests/cgroup_attach_override.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/cgroup_attach_override.c b/tools/testing/selftests/bpf/prog_tests/cgroup_attach_override.c index 356547e849e2..1921c5040d8c 100644 --- a/tools/testing/selftests/bpf/prog_tests/cgroup_attach_override.c +++ b/tools/testing/selftests/bpf/prog_tests/cgroup_attach_override.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 +#include <linux/kernel.h> #include <test_progs.h> #include "cgroup_helpers.h" @@ -16,10 +17,9 @@ static int prog_load(int verdict) BPF_MOV64_IMM(BPF_REG_0, verdict), /* r0 = verdict */ BPF_EXIT_INSN(), }; - size_t insns_cnt = sizeof(prog) / sizeof(struct bpf_insn); return bpf_test_load_program(BPF_PROG_TYPE_CGROUP_SKB, - prog, insns_cnt, "GPL", 0, + prog, ARRAY_SIZE(prog), "GPL", 0, bpf_log_buf, BPF_LOG_BUF_SIZE); } -- 2.20.1

3 years, 10 months

2
2
0 0

[PATCH v2] ipv4/raw: support binding to nonlocal addresses

by Riccardo Paolo Bestetti

Add support to inet v4 raw sockets for binding to nonlocal addresses through the IP_FREEBIND and IP_TRANSPARENT socket options, as well as the ipv4.ip_nonlocal_bind kernel parameter. Add helper function to inet_sock.h to check for bind address validity on the base of the address type and whether nonlocal address are enabled for the socket via any of the sockopts/sysctl, deduplicating checks in ipv4/ping.c, ipv4/af_inet.c, ipv6/af_inet6.c (for mapped v4->v6 addresses), and ipv4/raw.c. Add test cases with IP[V6]_FREEBIND verifying that both v4 and v6 raw sockets support binding to nonlocal addresses after the change. Add necessary support for the test cases to nettest. Signed-off-by: Riccardo Paolo Bestetti <pbl(a)bestov.io> --- Responding to review by David Ahern (21 March 2021), Thank you for your review. > Please add test cases to ipv4_addr_bind and ipv6_addr_bind in > tools/testing/selftests/net/fcnal-test.sh. The latter will verify if > IPv6 works the same or needs a change. I have added the tests for both v4 and v6. IPv6 raw sockets already supported the functionality (under the IPV6_* sockopts), and the (new) related tests pass, confirming this. I have not added negative tests (i.e. checking that the same addresses /fail/ to bind without the necessary flags) because I haven't seen such tests for other features. If you feel that's needed, I can look into it. > Also, this check duplicates the ones in __inet_bind and __inet6_bind; it > would be good to use an inline helper to reduce the duplication. Done. The same check was also duplicated in net/ipv4/ping.c, as detailed in the commit message. I have also deduplicated that, if it should have been left alone I'll quickly fire up a v3 and revert that. Sorry for the delay with v2, had a busy year. include/net/inet_sock.h | 12 +++++++ net/ipv4/af_inet.c | 7 ++-- net/ipv4/ping.c | 14 +++----- net/ipv4/raw.c | 13 ++++---- net/ipv6/af_inet6.c | 7 ++-- tools/testing/selftests/net/fcnal-test.sh | 40 +++++++++++++++++++++++ tools/testing/selftests/net/nettest.c | 33 ++++++++++++++++++- 7 files changed, 100 insertions(+), 26 deletions(-) diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h index 89163ef8cf4b..13b05d116f6b 100644 --- a/include/net/inet_sock.h +++ b/include/net/inet_sock.h @@ -373,4 +373,16 @@ static inline bool inet_can_nonlocal_bind(struct net *net, inet->freebind || inet->transparent; } +static inline bool inet_addr_valid_or_nonlocal(struct net *net, + struct inet_sock *inet, + __be32 addr, + int addr_type) +{ + return inet_can_nonlocal_bind(net, inet) || + addr == htonl(INADDR_ANY) || + addr_type == RTN_LOCAL || + addr_type == RTN_MULTICAST || + addr_type == RTN_BROADCAST; +} + #endif /* _INET_SOCK_H */ diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 1d816a5fd3eb..fb5cf3623e03 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -492,11 +492,8 @@ int __inet_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len, * is temporarily down) */ err = -EADDRNOTAVAIL; - if (!inet_can_nonlocal_bind(net, inet) && - addr->sin_addr.s_addr != htonl(INADDR_ANY) && - chk_addr_ret != RTN_LOCAL && - chk_addr_ret != RTN_MULTICAST && - chk_addr_ret != RTN_BROADCAST) + if (!inet_addr_valid_or_nonlocal(net, inet, addr->sin_addr.s_addr, + chk_addr_ret)) goto out; snum = ntohs(addr->sin_port); diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index 1e44a43acfe2..e540b0dcf085 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -311,15 +311,11 @@ static int ping_check_bind_addr(struct sock *sk, struct inet_sock *isk, pr_debug("ping_check_bind_addr(sk=%p,addr=%pI4,port=%d)\n", sk, &addr->sin_addr.s_addr, ntohs(addr->sin_port)); - if (addr->sin_addr.s_addr == htonl(INADDR_ANY)) - chk_addr_ret = RTN_LOCAL; - else - chk_addr_ret = inet_addr_type(net, addr->sin_addr.s_addr); - - if ((!inet_can_nonlocal_bind(net, isk) && - chk_addr_ret != RTN_LOCAL) || - chk_addr_ret == RTN_MULTICAST || - chk_addr_ret == RTN_BROADCAST) + chk_addr_ret = inet_addr_type(net, addr->sin_addr.s_addr); + + if (!inet_addr_valid_or_nonlocal(net, inet_sk(sk), + addr->sin_addr.s_addr, + chk_addr_ret)) return -EADDRNOTAVAIL; #if IS_ENABLED(CONFIG_IPV6) diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index bb446e60cf58..fa60517372b5 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -717,6 +717,7 @@ static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) { struct inet_sock *inet = inet_sk(sk); struct sockaddr_in *addr = (struct sockaddr_in *) uaddr; + struct net *net = sock_net(sk); u32 tb_id = RT_TABLE_LOCAL; int ret = -EINVAL; int chk_addr_ret; @@ -725,16 +726,16 @@ static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) goto out; if (sk->sk_bound_dev_if) - tb_id = l3mdev_fib_table_by_index(sock_net(sk), - sk->sk_bound_dev_if) ? : tb_id; + tb_id = l3mdev_fib_table_by_index(net, + sk->sk_bound_dev_if) ? : tb_id; - chk_addr_ret = inet_addr_type_table(sock_net(sk), addr->sin_addr.s_addr, - tb_id); + chk_addr_ret = inet_addr_type_table(net, addr->sin_addr.s_addr, tb_id); ret = -EADDRNOTAVAIL; - if (addr->sin_addr.s_addr && chk_addr_ret != RTN_LOCAL && - chk_addr_ret != RTN_MULTICAST && chk_addr_ret != RTN_BROADCAST) + if (!inet_addr_valid_or_nonlocal(net, inet, addr->sin_addr.s_addr, + chk_addr_ret)) goto out; + inet->inet_rcv_saddr = inet->inet_saddr = addr->sin_addr.s_addr; if (chk_addr_ret == RTN_MULTICAST || chk_addr_ret == RTN_BROADCAST) inet->inet_saddr = 0; /* Use device */ diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index b5878bb8e419..0c557edbbd20 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -337,11 +337,8 @@ static int __inet6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len, chk_addr_ret = inet_addr_type_dev_table(net, dev, v4addr); rcu_read_unlock(); - if (!inet_can_nonlocal_bind(net, inet) && - v4addr != htonl(INADDR_ANY) && - chk_addr_ret != RTN_LOCAL && - chk_addr_ret != RTN_MULTICAST && - chk_addr_ret != RTN_BROADCAST) { + if (!inet_addr_valid_or_nonlocal(net, inet, v4addr, + chk_addr_ret)) { err = -EADDRNOTAVAIL; goto out; } diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 3313566ce906..7caa4f0e067d 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -66,6 +66,10 @@ NSB_LO_IP=172.16.2.2 NSA_LO_IP6=2001:db8:2::1 NSB_LO_IP6=2001:db8:2::2 +# non-local addresses for freebind tests +NL_IP=172.17.1.1 +NL_IP6=2001:db8:4::1 + MD5_PW=abc123 MD5_WRONG_PW=abc1234 @@ -316,6 +320,9 @@ addr2str() ${NSB_LO_IP6}) echo "ns-B loopback IPv6";; ${NSB_LINKIP6}|${NSB_LINKIP6}%*) echo "ns-B IPv6 LLA";; + ${NL_IP}) echo "nonlocal IP";; + ${NL_IP6}) echo "nonlocal IPv6";; + ${VRF_IP}) echo "VRF IP";; ${VRF_IP6}) echo "VRF IPv6";; @@ -1767,6 +1774,14 @@ ipv4_addr_bind_novrf() log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind" done + # + # raw socket with nonlocal bind + # + a=${NL_IP} + log_start + run_cmd nettest -s -R -P icmp -f -l ${a} -I ${NSA_DEV} -b + log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after device bind" + # # tcp sockets # @@ -1815,6 +1830,14 @@ ipv4_addr_bind_vrf() run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 1 "Raw socket bind to out of scope address after VRF bind" + # + # raw socket with nonlocal bind + # + a=${NL_IP} + log_start + run_cmd nettest -s -R -P icmp -f -l ${a} -I ${VRF} -b + log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after VRF bind" + # # tcp sockets # @@ -1965,6 +1988,7 @@ ipv4_rt() a=${NSA_IP} log_start + run_cmd nettest ${varg} -s & sleep 1 run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & @@ -3402,6 +3426,14 @@ ipv6_addr_bind_novrf() log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind" done + # + # raw socket with nonlocal bind + # + a=${NL_IP6} + log_start + run_cmd nettest -6 -s -R -P icmp -f -l ${a} -I ${NSA_DEV} -b + log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address" + # # tcp sockets # @@ -3443,6 +3475,14 @@ ipv6_addr_bind_vrf() run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 1 "Raw socket bind to invalid local address after vrf bind" + # + # raw socket with nonlocal bind + # + a=${NL_IP6} + log_start + run_cmd nettest -6 -s -R -P icmp -f -l ${a} -I ${VRF} -b + log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after VRF bind" + # # tcp sockets # diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c index b599003eb5ba..d9a6fd2cd9d3 100644 --- a/tools/testing/selftests/net/nettest.c +++ b/tools/testing/selftests/net/nettest.c @@ -85,6 +85,7 @@ struct sock_args { int version; /* AF_INET/AF_INET6 */ int use_setsockopt; + int use_freebind; int use_cmsg; const char *dev; const char *server_dev; @@ -514,6 +515,29 @@ static int set_membership(int sd, uint32_t grp, uint32_t addr, int ifindex) return 0; } +static int set_freebind(int sd, int version) +{ + unsigned int one = 1; + int rc = 0; + + switch (version) { + case AF_INET: + if (setsockopt(sd, SOL_IP, IP_FREEBIND, &one, sizeof(one))) { + log_err_errno("setsockopt(IP_FREEBIND)"); + rc = -1; + } + break; + case AF_INET6: + if (setsockopt(sd, SOL_IPV6, IPV6_FREEBIND, &one, sizeof(one))) { + log_err_errno("setsockopt(IPV6_FREEBIND"); + rc = -1; + } + break; + } + + return rc; +} + static int set_broadcast(int sd) { unsigned int one = 1; @@ -1419,6 +1443,9 @@ static int lsock_init(struct sock_args *args) set_unicast_if(sd, args->ifindex, args->version)) goto err; + if (args->use_freebind && set_freebind(sd, args->version)) + goto err; + if (bind_socket(sd, args)) goto err; @@ -1827,7 +1854,7 @@ static int ipc_parent(int cpid, int fd, struct sock_args *args) return client_status; } -#define GETOPT_STR "sr:l:c:p:t:g:P:DRn:M:X:m:d:I:BN:O:SCi6xL:0:1:2:3:Fbq" +#define GETOPT_STR "sr:l:c:p:t:g:P:DRn:M:X:m:d:I:BN:O:SCi6xL:0:1:2:3:Fbqf" #define OPT_FORCE_BIND_KEY_IFINDEX 1001 #define OPT_NO_BIND_KEY_IFINDEX 1002 @@ -1864,6 +1891,7 @@ static void print_usage(char *prog) " -I dev bind socket to given device name - server mode\n" " -S use setsockopt (IP_UNICAST_IF or IP_MULTICAST_IF)\n" " to set device binding\n" + " -f bind socket with the IP[V6]_FREEBIND option\n" " -C use cmsg and IP_PKTINFO to specify device binding\n" "\n" " -L len send random message of given length\n" @@ -1999,6 +2027,9 @@ int main(int argc, char *argv[]) case 'S': args.use_setsockopt = 1; break; + case 'f': + args.use_freebind = 1; + break; case 'C': args.use_cmsg = 1; break; -- 2.33.1

3 years, 10 months

4
7
0 0

[PATCH] selftests/resctrl: Skip MBM&CMT tests when Intel Sub-NUMA

by Shaopeng Tan

From: "Tan, Shaopeng" <tan.shaopeng(a)jp.fujitsu.com> When the Intel Sub-NUMA Clustering(SNC) feature is enabled, the CMT and MBM counters may not be accurate. In this case, skip MBM&CMT tests. Signed-off-by: Shaopeng Tan <tan.shaopeng(a)jp.fujitsu.com> --- Hello, According to the Intel RDT reference Manual, when the sub-numa clustering feature is enabled, the CMT and MBM counters may not be accurate. When running CMT tests and MBM tests on Intel processor, the result is "not ok". So, fix it to skip the CMT & MBM test When the Intel Sub-NUMA Clustering(SNC) feature is enabled. Thanks, tools/testing/selftests/resctrl/resctrl.h | 1 + tools/testing/selftests/resctrl/resctrl_tests.c | 51 +++++++++++++++++++++++++ tools/testing/selftests/resctrl/resctrlfs.c | 26 +++++++++++++ 3 files changed, 78 insertions(+) diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h index 1ad10c4..8e82ce3 100644 --- a/tools/testing/selftests/resctrl/resctrl.h +++ b/tools/testing/selftests/resctrl/resctrl.h @@ -85,6 +85,7 @@ struct resctrl_val_param { int validate_bw_report_request(char *bw_report); bool validate_resctrl_feature_request(const char *resctrl_val); char *fgrep(FILE *inf, const char *str); +char *fgrep_last_match_line(FILE *inf, const char *str); int taskset_benchmark(pid_t bm_pid, int cpu_no); void run_benchmark(int signum, siginfo_t *info, void *ucontext); int write_schemata(char *ctrlgrp, char *schemata, int cpu_no, diff --git a/tools/testing/selftests/resctrl/resctrl_tests.c b/tools/testing/selftests/resctrl/resctrl_tests.c index 973f09a..122aab6 100644 --- a/tools/testing/selftests/resctrl/resctrl_tests.c +++ b/tools/testing/selftests/resctrl/resctrl_tests.c @@ -8,12 +8,15 @@ * Sai Praneeth Prakhya <sai.praneeth.prakhya(a)intel.com>, * Fenghua Yu <fenghua.yu(a)intel.com> */ +#include <numa.h> +#include <string.h> #include "resctrl.h" #define BENCHMARK_ARGS 64 #define BENCHMARK_ARG_SIZE 64 bool is_amd; +bool sub_numa_cluster_enable; void detect_amd(void) { @@ -34,6 +37,35 @@ void detect_amd(void) fclose(inf); } +void check_sub_numa_cluster(void) +{ + FILE *inf = fopen("/proc/cpuinfo", "r"); + char *res, *s; + int socket_num = 0; + int numa_nodes = 0; + + if (!inf) + return; + + res = fgrep_last_match_line(inf, "physical id"); + + if (res) { + s = strpbrk(res, "1234567890"); + socket_num = atoi(s) + 1; + free(res); + } + fclose(inf); + + numa_nodes = numa_max_node() + 1; + + /* + * when the Sub-NUMA Clustering(SNC) feature is enabled, + * the number of numa nodes is twice the number of sockets. + */ + if (numa_nodes == (2 * socket_num)) + sub_numa_cluster_enable = true; +} + static void cmd_help(void) { printf("usage: resctrl_tests [-h] [-b \"benchmark_cmd [options]\"] [-t test list] [-n no_of_bits]\n"); @@ -61,6 +93,13 @@ static void run_mbm_test(bool has_ben, char **benchmark_cmd, int span, ksft_print_msg("Starting MBM BW change ...\n"); + /* when the Sub-NUMA Clustering(SNC) feature is enabled, + * the CMT and MBM counters may not be accurate + */ + if (sub_numa_cluster_enable) { + ksft_test_result_skip("Sub-NUMA Clustering(SNC) feature is enabled, the MBM counters may not be accurate.\n"); + return; + } if (!validate_resctrl_feature_request(MBM_STR)) { ksft_test_result_skip("Hardware does not support MBM or MBM is disabled\n"); return; @@ -97,6 +136,14 @@ static void run_cmt_test(bool has_ben, char **benchmark_cmd, int cpu_no) int res; ksft_print_msg("Starting CMT test ...\n"); + + /* when the Sub-NUMA Clustering(SNC) feature is enabled, + * the CMT and MBM counters may not be accurate + */ + if (sub_numa_cluster_enable) { + ksft_test_result_skip("Sub-NUMA Clustering(SNC) feature is enabled, the CMT counters may not be accurate.\n"); + return; + } if (!validate_resctrl_feature_request(CMT_STR)) { ksft_test_result_skip("Hardware does not support CMT or CMT is disabled\n"); return; @@ -210,6 +257,10 @@ int main(int argc, char **argv) /* Detect AMD vendor */ detect_amd(); + /* check whether sub numa clustering is enable or not */ + if (!is_amd) + check_sub_numa_cluster(); + if (has_ben) { /* Extract benchmark command from command line. */ for (i = ben_ind; i < argc; i++) { diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c index 5f5a166..1908ecb 100644 --- a/tools/testing/selftests/resctrl/resctrlfs.c +++ b/tools/testing/selftests/resctrl/resctrlfs.c @@ -606,6 +606,32 @@ char *fgrep(FILE *inf, const char *str) } /* + * Find the last matched line. + * Return a pointer to the string of the matched line, + * else retuen NULL if no matched line + */ +char *fgrep_last_match_line(FILE *inf, const char *str) +{ + char line[256]; + char result_line[256]; + int slen = strlen(str); + + while (!feof(inf)) { + if (!fgets(line, 256, inf)) + break; + if (strncmp(line, str, slen)) + continue; + + strcpy(result_line, line); + } + + if (strlen(result_line) >= slen) + return strdup(result_line); + + return NULL; +} + +/* * validate_resctrl_feature_request - Check if requested feature is valid. * @resctrl_val: Requested feature * -- 1.8.3.1

3 years, 10 months

3
3
0 0

Re: [PATCH v2] ipv4/raw: support binding to nonlocal addresses

by Jakub Kicinski

On Mon, 15 Nov 2021 00:09:44 +0100 Riccardo Paolo Bestetti wrote: > Add support to inet v4 raw sockets for binding to nonlocal addresses > through the IP_FREEBIND and IP_TRANSPARENT socket options, as well as > the ipv4.ip_nonlocal_bind kernel parameter. FWIW this patch did not make it to patchwork or any of the mailing lists. Not immediately obvious why. Can you try re-sending?

3 years, 10 months

2
1
0 0

[PATCH 1/3] selftests/tc-testing: add exit code

by Li Zhijian

Mark the summary result as FAIL to prevent from confusing the selftest framework if some of them are failed. Previously, the selftest framework always treats it as *ok* even though some of them are failed actually. That's because the script tdc.sh always return 0. # All test results: # # 1..97 # ok 1 83be - Create FQ-PIE with invalid number of flows # ok 2 8b6e - Create RED with no flags [...snip] # ok 6 5f15 - Create RED with flags ECN, harddrop # ok 7 53e8 - Create RED with flags ECN, nodrop # ok 8 d091 - Fail to create RED with only nodrop flag # ok 9 af8e - Create RED with flags ECN, nodrop, harddrop # not ok 10 ce7d - Add mq Qdisc to multi-queue device (4 queues) # Could not match regex pattern. Verify command output: # qdisc mq 1: root # qdisc fq_codel 0: parent 1:4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 # qdisc fq_codel 0: parent 1:3 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 [...snip] # ok 96 6979 - Change quantum of a strict ETS band # ok 97 9a7d - Change ETS strict band without quantum # # # # ok 1 selftests: tc-testing: tdc.sh <<< summary result CC: Philip Li <philip.li(a)intel.com> Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Li Zhijian <zhijianx.li(a)intel.com> --- tools/testing/selftests/tc-testing/tdc.py | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/tc-testing/tdc.py b/tools/testing/selftests/tc-testing/tdc.py index a3e43189d940..29832fce66ac 100755 --- a/tools/testing/selftests/tc-testing/tdc.py +++ b/tools/testing/selftests/tc-testing/tdc.py @@ -716,6 +716,7 @@ def set_operation_mode(pm, parser, args, remaining): list_test_cases(alltests) exit(0) + exit_code = 0 # KSFT_PASS if len(alltests): req_plugins = pm.get_required_plugins(alltests) try: @@ -724,6 +725,8 @@ def set_operation_mode(pm, parser, args, remaining): print('The following plugins were not found:') print('{}'.format(pde.missing_pg)) catresults = test_runner(pm, args, alltests) + if catresults.count_failures() != 0 + exit_code = 1 # KSFT_FAIL if args.format == 'none': print('Test results output suppression requested\n') else: @@ -748,6 +751,8 @@ def set_operation_mode(pm, parser, args, remaining): gid=int(os.getenv('SUDO_GID'))) else: print('No tests found\n') + exit_code = 4 # KSFT_SKIP + exit(exit_code) def main(): """ @@ -767,8 +772,5 @@ def main(): set_operation_mode(pm, parser, args, remaining) - exit(0) - - if __name__ == "__main__": main() -- 2.32.0

3 years, 10 months

1
3
0 0

[PATCH v3 net-next 0/6] Add RTNL interface for SyncE

by Maciej Machnikowski

Synchronous Ethernet networks use a physical layer clock to syntonize the frequency across different network elements. Basic SyncE node defined in the ITU-T G.8264 consist of an Ethernet Equipment Clock (EEC) and have the ability to recover synchronization from the synchronization inputs - either traffic interfaces or external frequency sources. The EEC can synchronize its frequency (syntonize) to any of those sources. It is also able to select synchronization source through priority tables and synchronization status messaging. It also provides neccessary filtering and holdover capabilities This patch series introduces basic interface for reading the Ethernet Equipment Clock (EEC) state on a SyncE capable device. This state gives information about the source of the syntonization signal (ether my port, or any external one) and the state of EEC. This interface is required\ to implement Synchronization Status Messaging on upper layers. v3: - remove RTM_GETRCLKRANGE - return state of all possible pins in the RTM_GETRCLKSTATE - clarify documentation v2: - improved documentation - fixed kdoc warning RFC history: v2: - removed whitespace changes - fix issues reported by test robot v3: - Changed naming from SyncE to EEC - Clarify cover letter and commit message for patch 1 v4: - Removed sync_source and pin_idx info - Changed one structure to attributes - Added EEC_SRC_PORT flag to indicate that the EEC is synchronized to the recovered clock of a port that returns the state v5: - add EEC source as an optiona attribute - implement support for recovered clocks - align states returned by EEC to ITU-T G.781 v6: - fix EEC clock state reporting - add documentation - fix descriptions in code comments Maciej Machnikowski (6): ice: add support detecting features based on netlist rtnetlink: Add new RTM_GETEECSTATE message to get SyncE status ice: add support for reading SyncE DPLL state rtnetlink: Add support for SyncE recovered clock configuration ice: add support for SyncE recovered clocks docs: net: Add description of SyncE interfaces Documentation/networking/synce.rst | 124 ++++++++++ drivers/net/ethernet/intel/ice/ice.h | 7 + .../net/ethernet/intel/ice/ice_adminq_cmd.h | 94 +++++++- drivers/net/ethernet/intel/ice/ice_common.c | 224 ++++++++++++++++++ drivers/net/ethernet/intel/ice/ice_common.h | 20 +- drivers/net/ethernet/intel/ice/ice_devids.h | 3 + drivers/net/ethernet/intel/ice/ice_lib.c | 6 +- drivers/net/ethernet/intel/ice/ice_main.c | 137 +++++++++++ drivers/net/ethernet/intel/ice/ice_ptp.c | 34 +++ drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 49 ++++ drivers/net/ethernet/intel/ice/ice_ptp_hw.h | 22 ++ drivers/net/ethernet/intel/ice/ice_type.h | 1 + include/linux/netdevice.h | 33 +++ include/uapi/linux/if_link.h | 49 ++++ include/uapi/linux/rtnetlink.h | 16 +- net/core/rtnetlink.c | 189 +++++++++++++++ security/selinux/nlmsgtab.c | 5 +- 17 files changed, 1005 insertions(+), 8 deletions(-) create mode 100644 Documentation/networking/synce.rst -- 2.26.3

3 years, 10 months

6
17
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror