- Linux-kselftest-mirror - lists.linaro.org

[PATCH bpf-next v10 0/5] xsk: TX metadata Launch Time support

by Song Yoong Siang

This series expands the XDP TX metadata framework to allow user applications to pass per packet 64-bit launch time directly to the kernel driver, requesting launch time hardware offload support. The XDP TX metadata framework will not perform any clock conversion or packet reordering. Please note that the role of Tx metadata is just to pass the launch time, not to enable the offload feature. Users will need to enable the launch time hardware offload feature of the device by using the respective command, such as the tc-etf command. Although some devices use the tc-etf command to enable their launch time hardware offload feature, xsk packets will not go through the etf qdisc. Therefore, in my opinion, the launch time should always be based on the PTP Hardware Clock (PHC). Thus, i did not include a clock ID to indicate the clock source. To simplify the test steps, I modified the xdp_hw_metadata bpf self-test tool in such a way that it will set the launch time based on the offset provided by the user and the value of the Receive Hardware Timestamp, which is against the PHC. This will eliminate the need to discipline System Clock with the PHC and then use clock_gettime() to get the time. Please note that AF_XDP lacks a feedback mechanism to inform the application if the requested launch time is invalid. So, users are expected to familiar with the horizon of the launch time of the device they use and not request a launch time that is beyond the horizon. Otherwise, the driver might interpret the launch time incorrectly and react wrongly. For stmmac and igc, where modulo computation is used, a launch time larger than the horizon will cause the device to transmit the packet earlier that the requested launch time. Although there is no feedback mechanism for the launch time request for now, user still can check whether the requested launch time is working or not, by requesting the Transmit Completion Hardware Timestamp. v10: - use net_err_ratelimited(), instead of net_ratelimit() (Maciej) - accumulate the amount of used descs in local variable and update the igc_metadata_request::used_desc once (Maciej) - Ensure reverse christmas tree rule (Maciej) V9: https://lore.kernel.org/netdev/20250206060408.808325-1-yoong.siang.song@int… - Remove the igc_desc_unused() checking (Maciej) - Ensure that skb allocation and DMA mapping work before proceeding to fill in igc_tx_buffer info, context desc, and data desc (Maciej) - Rate limit the error messages (Maciej) - Update the comment to indicate that the 2 descriptors needed by the empty frame are already taken into consideration (Maciej) - Handle the case where the insertion of an empty frame fails and explain the reason behind (Maciej) - put self SOB tag as last tag (Maciej) V8: https://lore.kernel.org/netdev/20250205024116.798862-1-yoong.siang.song@int… - check the number of used descriptor in xsk_tx_metadata_request() by using used_desc of struct igc_metadata_request, and then decreases the budget with it (Maciej) - submit another bug fix patch to set the buffer type for empty frame (Maciej): https://lore.kernel.org/netdev/20250205023603.798819-1-yoong.siang.song@int… V7: https://lore.kernel.org/netdev/20250204004907.789330-1-yoong.siang.song@int… - split the refactoring code of igc empty packet insertion into a separate commit (Faizal) - add explanation on why the value "4" is used as igc transmit budget (Faizal) - perform a stress test by sending 1000 packets with 10ms interval and launch time set to 500us in the future (Faizal & Yong Liang) V6: https://lore.kernel.org/netdev/20250116155350.555374-1-yoong.siang.song@int… - fix selftest build errors by using asprintf() and realloc(), instead of managing the buffer sizes manually (Daniel, Stanislav) V5: https://lore.kernel.org/netdev/20250114152718.120588-1-yoong.siang.song@int… - change netdev feature name from tx-launch-time to tx-launch-time-fifo to explicitly state the FIFO behaviour (Stanislav) - improve the looping of xdp_hw_metadata app to wait for packet tx completion to be more readable by using clock_gettime() (Stanislav) - add launch time setup steps into xdp_hw_metadata app (Stanislav) V4: https://lore.kernel.org/netdev/20250106135506.9687-1-yoong.siang.song@intel… - added XDP launch time support to the igc driver (Jesper & Florian) - added per-driver launch time limitation on xsk-tx-metadata.rst (Jesper) - added explanation on FIFO behavior on xsk-tx-metadata.rst (Jakub) - added step to enable launch time in the commit message (Jesper & Willem) - explicitly documented the type of launch_time and which clock source it is against (Willem) V3: https://lore.kernel.org/netdev/20231203165129.1740512-1-yoong.siang.song@in… - renamed to use launch time (Jesper & Willem) - changed the default launch time in xdp_hw_metadata apps from 1s to 0.1s because some NICs do not support such a large future time. V2: https://lore.kernel.org/netdev/20231201062421.1074768-1-yoong.siang.song@in… - renamed to use Earliest TxTime First (Willem) - renamed to use txtime (Willem) V1: https://lore.kernel.org/netdev/20231130162028.852006-1-yoong.siang.song@int… Song Yoong Siang (5): xsk: Add launch time hardware offload support to XDP Tx metadata selftests/bpf: Add launch time request to xdp_hw_metadata net: stmmac: Add launch time support to XDP ZC igc: Refactor empty frame insertion for launch time support igc: Add launch time support to XDP ZC Documentation/netlink/specs/netdev.yaml | 4 + Documentation/networking/xsk-tx-metadata.rst | 62 +++++++ drivers/net/ethernet/intel/igc/igc.h | 1 + drivers/net/ethernet/intel/igc/igc_main.c | 143 +++++++++++---- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 + .../net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++ include/net/xdp_sock.h | 10 ++ include/net/xdp_sock_drv.h | 1 + include/uapi/linux/if_xdp.h | 10 ++ include/uapi/linux/netdev.h | 3 + net/core/netdev-genl.c | 2 + net/xdp/xsk.c | 3 + tools/include/uapi/linux/if_xdp.h | 10 ++ tools/include/uapi/linux/netdev.h | 3 + tools/testing/selftests/bpf/xdp_hw_metadata.c | 168 +++++++++++++++++- 15 files changed, 396 insertions(+), 39 deletions(-) -- 2.34.1

2 months, 1 week

3
8
0 0

[PATCH] selftests: netfilter: Fix typo in conntrack_icmp_related.sh comment

by Marcelo Moreira

Correct the typo "adress" to "address" in a comment in conntrack_icmp_related.sh to improve clarity. Signed-off-by: Marcelo Moreira <marcelomoreira1905(a)gmail.com> --- tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh index c63d840ead61..f63b7f12b36a 100755 --- a/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh +++ b/tools/testing/selftests/net/netfilter/conntrack_icmp_related.sh @@ -171,7 +171,7 @@ table inet filter { } EOF -# make sure NAT core rewrites adress of icmp error if nat is used according to +# make sure NAT core rewrites address of icmp error if nat is used according to # conntrack nat information (icmp error will be directed at nsrouter1 address, # but it needs to be routed to nsclient1 address). ip netns exec "$nsrouter1" nft -f - <<EOF -- 2.48.1

2 months, 1 week

2
1
0 0

[PATCH v7 0/3] rust: kunit: Support KUnit tests with a user-space like syntax

by David Gow

Hi all, This is v7 of the Rust/KUnit integration patch. I think all of the suggestions have at least been responded to (even if there are a few I'm leaving as either future projects or matters of taste). Hopefully this is good-to-go for 6.15, so we can start using it concurrently with making any additional improvements we may wish. This series was originally written by José Expósito, and has been modified and updated by Matt Gilbride, Miguel Ojeda, and myself. The original version can be found here: https://github.com/Rust-for-Linux/linux/pull/950 Add support for writing KUnit tests in Rust. While Rust doctests are already converted to KUnit tests and run, they're really better suited for examples, rather than as first-class unit tests. This series implements a series of direct Rust bindings for KUnit tests, as well as a new macro which allows KUnit tests to be written using a close variant of normal Rust unit test syntax. The only change required is replacing '#[cfg(test)]' with '#[kunit_tests(kunit_test_suite_name)]' An example test would look like: #[kunit_tests(rust_kernel_hid_driver)] mod tests { use super::*; use crate::{c_str, driver, hid, prelude::*}; use core::ptr; struct SimpleTestDriver; impl Driver for SimpleTestDriver { type Data = (); } #[test] fn rust_test_hid_driver_adapter() { let mut hid = bindings::hid_driver::default(); let name = c_str!("SimpleTestDriver"); static MODULE: ThisModule = unsafe { ThisModule::from_ptr(ptr::null_mut()) }; let res = unsafe { <hid::Adapter<SimpleTestDriver> as driver::DriverOps>::register(&mut hid, name, &MODULE) }; assert_eq!(res, Err(ENODEV)); // The mock returns -19 } } Please give this a go, and make sure I haven't broken it! There's almost certainly a lot of improvements which can be made -- and there's a fair case to be made for replacing some of this with generated C code which can use the C macros -- but this is hopefully an adequate implementation for now, and the interface can (with luck) remain the same even if the implementation changes. A few small notable missing features: - Attributes (like the speed of a test) are hardcoded to the default value. - Similarly, the module name attribute is hardcoded to NULL. In C, we use the KBUILD_MODNAME macro, but I couldn't find a way to use this from Rust which wasn't more ugly than just disabling it. - Assertions are not automatically rewritten to use KUnit assertions. --- Changes since v6: https://lore.kernel.org/rust-for-linux/20250214074051.1619256-1-davidgow@go… - Fixed an [allow(unused_unsafe)] which ended up in patch 2 instead of patch 1. (Thanks, Tamir!) - Doc comments now have several useful links. (Thanks, Tamir!) - Fix a potential compile error under macos. (Thanks, Tamir!) - Several small tidy-ups to limit unsafe usage. (Thanks, Tamir!) Changes since v5: https://lore.kernel.org/all/20241213081035.2069066-1-davidgow@google.com/ - Rebased against 6.14-rc1 - Fixed a bunch of warnings / clippy lints introduced in Rust 1.83 and 1.84. - No longer needs static_mut_refs / const_mut_refs, and is much cleaned up as a result. (Thanks, Miguel) - Major documentation and example fixes. (Thanks, Miguel) Changes since v4: https://lore.kernel.org/linux-kselftest/20241101064505.3820737-1-davidgow@g… - Rebased against 6.13-rc1 - Allowed an unused_unsafe warning after the behaviour of addr_of_mut!() changed in Rust 1.82. (Thanks Boqun, Miguel) - "Expect" that the sample assert_eq!(1+1, 2) produces a clippy warning due to a redundant assertion. (Thanks Boqun, Miguel) - Fix some missing safety comments, and remove some unneeded 'unsafe' blocks. (Thanks Boqun) - Fix a couple of minor rustfmt issues which were triggering checkpatch warnings. Changes since v3: https://lore.kernel.org/linux-kselftest/20241030045719.3085147-2-davidgow@g… - The kunit_unsafe_test_suite!() macro now panic!s if the suite name is too long, triggering a compile error. (Thanks, Alice!) - The #[kunit_tests()] macro now preserves span information, so errors can be better reported. (Thanks, Boqun!) - The example tests have been updated to no longer use assert_eq!() with a constant bool argument (which triggered a clippy warning now we have the span info). Changes since v2: https://lore.kernel.org/linux-kselftest/20241029092422.2884505-1-davidgow@g… - Include missing rust/macros/kunit.rs file from v2. (Thanks Boqun!) - The kunit_unsafe_test_suite!() macro will truncate the name of the suite if it is too long. (Thanks Alice!) - The proc macro now emits an error if the suite name is too long. - We no longer needlessly use UnsafeCell<> in kunit_unsafe_test_suite!(). (Thanks Alice!) Changes since v1: https://lore.kernel.org/lkml/20230720-rustbind-v1-0-c80db349e3b5@google.com… - Rebase on top of the latest rust-next (commit 718c4069896c) - Make kunit_case a const fn, rather than a macro (Thanks Boqun) - As a result, the null terminator is now created with kernel::kunit::kunit_case_null() - Use the C kunit_get_current_test() function to implement in_kunit_test(), rather than re-implementing it (less efficiently) ourselves. Changes since the GitHub PR: - Rebased on top of kselftest/kunit - Add const_mut_refs feature This may conflict with https://lore.kernel.org/lkml/20230503090708.2524310-6-nmi@metaspace.dk/ - Add rust/macros/kunit.rs to the KUnit MAINTAINERS entry --- José Expósito (3): rust: kunit: add KUnit case and suite macros rust: macros: add macro to easily run KUnit tests rust: kunit: allow to know if we are in a test MAINTAINERS | 1 + rust/kernel/kunit.rs | 199 +++++++++++++++++++++++++++++++++++++++++++ rust/macros/kunit.rs | 161 ++++++++++++++++++++++++++++++++++ rust/macros/lib.rs | 29 +++++++ 4 files changed, 390 insertions(+) create mode 100644 rust/macros/kunit.rs -- 2.48.1.601.g30ceb7b040-goog

2 months, 1 week

1
3
0 0

[PATCH] selftests/mm: Fix spelling

by Ujwal Kundur

Fix misspellings flagged by codespell. Signed-off-by: Ujwal Kundur <ujwal.kundur(a)gmail.com> --- tools/testing/selftests/mm/uffd-common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/mm/uffd-common.c b/tools/testing/selftests/mm/uffd-common.c index 717539eddf98..254409972ddb 100644 --- a/tools/testing/selftests/mm/uffd-common.c +++ b/tools/testing/selftests/mm/uffd-common.c @@ -323,7 +323,7 @@ int uffd_test_ctx_init(uint64_t features, const char **errmsg) ret = userfaultfd_open(&features); if (ret) { if (errmsg) - *errmsg = "possible lack of priviledge"; + *errmsg = "possible lack of privilege"; return ret; } @@ -348,7 +348,7 @@ int uffd_test_ctx_init(uint64_t features, const char **errmsg) /* * After initialization of area_src, we must explicitly release pages * for area_dst to make sure it's fully empty. Otherwise we could have - * some area_dst pages be errornously initialized with zero pages, + * some area_dst pages be erroneously initialized with zero pages, * hence we could hit memory corruption later in the test. * * One example is when THP is globally enabled, above allocate_area() -- 2.20.1

2 months, 1 week

1
0
0 0

[PATCH] kunit: qemu_configs: sparc: use Zilog console

by Thomas Weißschuh

The driver for the 8250 console is not used, as no port is found. Instead the prom0 bootconsole is used the whole time. The prom driver translates '\n' to '\r\n' before handing of the message off to the firmware. The firmware performs the same translation again. In the final output produced by QEMU each line ends with '\r\r\n'. This breaks the kunit parser, which can only handle '\r\n' and '\n'. Use the Zilog console instead. It works correctly, is the one documented by the QEMU manual and also saves a bit of codesize: Before=4051011, After=4023326, chg -0.68% Observed on QEMU 9.2.0. Fixes: 87c9c1631788 ("kunit: tool: add support for QEMU") Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- tools/testing/kunit/qemu_configs/sparc.py | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/kunit/qemu_configs/sparc.py b/tools/testing/kunit/qemu_configs/sparc.py index e975c4331a7c2a74f8ade61c3f31ff0d37314545..256d9573b44646533d1a6f768976628adc87921e 100644 --- a/tools/testing/kunit/qemu_configs/sparc.py +++ b/tools/testing/kunit/qemu_configs/sparc.py @@ -2,8 +2,9 @@ from ..qemu_config import QemuArchParams QEMU_ARCH = QemuArchParams(linux_arch='sparc', kconfig=''' -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y''', +CONFIG_SERIAL_SUNZILOG=y +CONFIG_SERIAL_SUNZILOG_CONSOLE=y +''', qemu_arch='sparc', kernel_path='arch/sparc/boot/zImage', kernel_command_line='console=ttyS0 mem=256M', --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250214-kunit-qemu-sparc-console-73ece282d867 Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

2 months, 1 week

2
1
0 0

[PATCH bpf-next v3 0/3] bpf: Fix array bounds error with may_goto and add selftest

by Jiayuan Chen

Syzbot caught an array out-of-bounds bug [1]. It turns out that when the BPF program runs through do_misc_fixups(), it allocates an extra 8 bytes on the call stack, which eventually causes stack_depth to exceed 512. I was able to reproduce this issue probabilistically by enabling CONFIG_UBSAN=y and disabling CONFIG_BPF_JIT_ALWAYS_ON with the selfttest I provide in second patch(although it doesn't happen every time - I didn't dig deeper into why UBSAN behaves this way). Furthermore, if I set /proc/sys/net/core/bpf_jit_enable to 0 to disable the jit, a panic occurs, and the reason is the same, that bpf_func is assigned an incorrect address. [---[ end trace ]--- [Oops: general protection fault, probably for non-canonical address 0x100f0e0e0d090808: 0000 [#1] PREEMPT SMP NOPTI [Tainted: [W]=WARN, [O]=OOT_MODULE [RIP: 0010:bpf_test_run+0x1d2/0x360 [RSP: 0018:ffffafc7955178a0 EFLAGS: 00010246 [RAX: 100f0e0e0d090808 RBX: ffff8e9fdb2c4100 RCX: 0000000000000018 [RDX: 00000000002b5b18 RSI: ffffafc780497048 RDI: ffff8ea04d601700 [RBP: ffffafc780497000 R08: ffffafc795517a0c R09: 0000000000000000 [R10: 0000000000000000 R11: fefefefefefefeff R12: ffff8ea04d601700 [R13: ffffafc795517928 R14: ffffafc795517928 R15: 0000000000000000 [CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [CR2: 00007f181c064648 CR3: 00000001aa2be003 CR4: 0000000000770ef0 [DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [PKRU: 55555554 [Call Trace: [ <TASK> [ ? die_addr+0x36/0x90 [ ? exc_general_protection+0x237/0x430 [ ? asm_exc_general_protection+0x26/0x30 [ ? bpf_test_run+0x1d2/0x360 [ ? bpf_test_run+0x10d/0x360 [ ? __link_object+0x12a/0x1e0 [ ? slab_build_skb+0x23/0x130 [ ? kmem_cache_alloc_noprof+0x2ea/0x3f0 [ ? sk_prot_alloc+0xc2/0x120 [ bpf_prog_test_run_skb+0x21b/0x590 [ __sys_bpf+0x340/0xa80 [ __x64_sys_bpf+0x1e/0x30 --- v2 -> v3: Optimized some code naming and conditional judgment logic. https://lore.kernel.org/bpf/20250213131214.164982-1-mrpre@163.com/T/ v1 -> v2: Directly reject loading programs with a stack size greater than 512 when jit disabled.(Suggested by Alexei Starovoitov) https://lore.kernel.org/bpf/20250212135251.85487-1-mrpre@163.com/T/ Jiayuan Chen (3): bpf: Fix array bounds error with may_goto selftests/bpf: Introduce __load_if_JITed annotation for tests selftests/bpf: Add selftest for may_goto kernel/bpf/core.c | 19 +++++-- kernel/bpf/verifier.c | 7 +++ tools/testing/selftests/bpf/progs/bpf_misc.h | 2 + .../selftests/bpf/progs/verifier_stack_ptr.c | 52 +++++++++++++++++++ tools/testing/selftests/bpf/test_loader.c | 26 ++++++++++ 5 files changed, 102 insertions(+), 4 deletions(-) -- 2.47.1

2 months, 1 week

2
4
0 0

[PATCH] selftests: mptcp: connect: Use more formal wording in error message

by Marcelo Moreira

Update error message in mptcp_connect.sh to use a more formal and consistent wording. The phrase "not able to" was replaced with "Unable to" for better clarity. Signed-off-by: Marcelo Moreira <marcelomoreira1905(a)gmail.com> --- tools/testing/selftests/net/mptcp/mptcp_connect.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh index 5e3c56253274..bdc9c22af6be 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh @@ -261,8 +261,8 @@ check_mptcp_disabled() # mainly to cover more code if ! ip netns exec ${disabled_ns} sysctl net.mptcp >/dev/null; then - mptcp_lib_pr_fail "not able to list net.mptcp sysctl knobs" - mptcp_lib_result_fail "not able to list net.mptcp sysctl knobs" + mptcp_lib_pr_fail "Unable to list net.mptcp sysctl knobs" + mptcp_lib_result_fail "Unable to list net.mptcp sysctl knobs" ret=${KSFT_FAIL} return 1 fi -- 2.48.1

2 months, 1 week

1
0
0 0

[PATCH] Adds colors to kselftest output

by Marcelo Moreira

This commit improves the readability of kselftest results by adding ANSI color codes to the [ OK ] and FAIL messages. Signed-off-by: Marcelo Moreira <marcelomoreira1905(a)gmail.com> --- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh index 051e289d7967..7b55855ff788 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh @@ -83,7 +83,7 @@ mptcp_lib_print_err() { # shellcheck disable=SC2120 # parameters are optional mptcp_lib_pr_ok() { - mptcp_lib_print_ok "[ OK ]${1:+ ${*}}" + mptcp_lib_print_ok "\033[32m[ OK ]\033[0m${1:+ ${*}}" } mptcp_lib_pr_skip() { @@ -97,7 +97,7 @@ mptcp_lib_pr_fail() { title="IGNO" cmt=" (flaky)" else - title="FAIL" + title="\033[31mFAIL\033[0m" fi mptcp_lib_print_err "[${title}]${cmt}${1:+ ${*}}" -- 2.48.1

2 months, 1 week

3
3
0 0

[PATCH v3 0/2] printf: convert self-test to KUnit

by Tamir Duberstein

This is one of just 3 remaining "Test Module" kselftests (the others being bitmap and scanf), the rest having been converted to KUnit. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 printf I have also sent out a series converting scanf[0]. Link: https://lore.kernel.org/all/20250204-scanf-kunit-convert-v3-0-386d7c3ee714@… [0] Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v3: - Remove extraneous trailing newlines from failure messages. - Replace `pr_warn` with `kunit_warn`. - Drop arch changes. - Remove KUnit boilerplate from CONFIG_PRINTF_KUNIT_TEST help text. - Restore `total_tests` counting. - Remove tc_fail macro in last patch. - Link to v2: https://lore.kernel.org/r/20250207-printf-kunit-convert-v2-0-057b23860823@g… Changes in v2: - Incorporate code review from prior work[0] by Arpitha Raghunandan. - Link to v1: https://lore.kernel.org/r/20250204-printf-kunit-convert-v1-0-ecf1b846a4de@g… Link: https://lore.kernel.org/lkml/20200817043028.76502-1-98.arpi@gmail.com/t/#u [0] --- Tamir Duberstein (2): printf: convert self-test to KUnit printf: break kunit into test cases Documentation/core-api/printk-formats.rst | 2 +- MAINTAINERS | 2 +- lib/Kconfig.debug | 12 +- lib/Makefile | 2 +- lib/{test_printf.c => printf_kunit.c} | 429 +++++++++++++----------------- tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/printf.sh | 4 - 7 files changed, 192 insertions(+), 260 deletions(-) --- base-commit: a64dcfb451e254085a7daee5fe51bf22959d52d3 change-id: 20250131-printf-kunit-convert-fd4012aa2ec6 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 1 week

4
7
0 0

[PATCH 1/2] misc: pci_endpoint_test: Give disabled BARs a distinct error code

by Niklas Cassel

The current code returns -ENOMEM if test->bar[barno] is NULL. There can be two reasons why test->bar[barno] is NULL: 1) The pci_ioremap_bar() call in pci_endpoint_test_probe() failed. 2) The BAR was skipped, because it is disabled by the endpoint. Many PCI endpoint controller drivers will disable all BARs in their init function. A disabled BAR will have a size of 0. A PCI endpoint function driver will be able to enable any BAR that is not marked as BAR_RESERVED (which means that the BAR should not be touched by the EPF driver). Thus, perform check if the size is 0, before checking if test->bar[barno] is NULL, such that we can return different errors. This will allow the selftests to return SKIP instead of FAIL for disabled BARs. Signed-off-by: Niklas Cassel <cassel(a)kernel.org> --- Hello PCI maintainers. This patch might give a trivial conflict with: https://lore.kernel.org/linux-pci/20250123095906.3578241-2-cassel@kernel.or… because the context lines (lines that haven't been changed) might be different. If there is a conflict, simply look at this patch by itself, and resolution should be trivial. drivers/misc/pci_endpoint_test.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index d5ac71a49386..b95980b29eb9 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -292,11 +292,13 @@ static int pci_endpoint_test_bar(struct pci_endpoint_test *test, void *read_buf __free(kfree) = NULL; struct pci_dev *pdev = test->pdev; + bar_size = pci_resource_len(pdev, barno); + if (!bar_size) + return -ENODATA; + if (!test->bar[barno]) return -ENOMEM; - bar_size = pci_resource_len(pdev, barno); - if (barno == test->test_reg_bar) bar_size = 0x4; -- 2.48.1

2 months, 1 week

2
7
0 0

[PATCH net-next v2 5/5] selftests: test_vxlan_fdb_changelink: Add a test for MC remote change

by Petr Machata

Changes to MC remote need to be reflected in actual group memberships. Add a test to verify that it is the case. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor(a)blackwall.org> --- Notes: CC: Simon Horman <horms(a)kernel.org> CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org .../net/test_vxlan_fdb_changelink.sh | 76 +++++++++++++++++++ 1 file changed, 76 insertions(+) diff --git a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh index 6f2bca4b346c..062f957950af 100755 --- a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh +++ b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh @@ -3,6 +3,7 @@ ALL_TESTS=" test_set_remote + test_change_mc_remote " source lib.sh @@ -31,6 +32,81 @@ test_set_remote() log_test 'FDB default-remote handling across "ip link set"' } +fmt_remote() +{ + local addr=$1; shift + + if [[ $addr == 224.* ]]; then + echo "group $addr" + else + echo "remote $addr" + fi +} + +change_remote() +{ + local remote=$1; shift + + ip link set dev vx type vxlan $(fmt_remote $remote) dev v1 +} + +check_membership() +{ + local check_vec=("$@") + + local memberships + memberships=$( + netstat -n --groups | + sed -n '/^v1\b/p' | + grep -o '[^ ]*$' + ) + check_err $? "Couldn't obtain group memberships" + + local item + for item in "${check_vec[@]}"; do + eval "local $item" + echo "$memberships" | grep -q "\b$group\b" + check_err_fail $fail $? "$group is_ex reported in IGMP query response" + done +} + +test_change_mc_remote() +{ + check_command netstat || return + + ip_link_add v1 up type veth peer name v2 + ip_link_set_up v2 + + RET=0 + + ip_link_add vx up type vxlan dstport 4789 \ + local 192.0.2.1 $(fmt_remote 224.1.1.1) dev v1 vni 1000 + + check_membership "group=224.1.1.1 fail=0" \ + "group=224.1.1.2 fail=1" \ + "group=224.1.1.3 fail=1" + + log_test "MC group report after VXLAN creation" + + RET=0 + + change_remote 224.1.1.2 + check_membership "group=224.1.1.1 fail=1" \ + "group=224.1.1.2 fail=0" \ + "group=224.1.1.3 fail=1" + + log_test "MC group report after changing VXLAN remote MC->MC" + + RET=0 + + change_remote 192.0.2.2 + check_membership "group=224.1.1.1 fail=1" \ + "group=224.1.1.2 fail=1" \ + "group=224.1.1.3 fail=1" + + log_test "MC group report after changing VXLAN remote MC->UC" +} + trap defer_scopes_cleanup EXIT tests_run -- 2.47.0

2 months, 1 week

1
0
0 0

[PATCH net-next v2 4/5] selftests: test_vxlan_fdb_changelink: Convert to lib.sh

by Petr Machata

Instead of inlining equivalents, use lib.sh-provided primitives. Use defer to manage vx lifetime. This will make it easier to extend the test in the next patch. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor(a)blackwall.org> --- Notes: CC: Simon Horman <horms(a)kernel.org> CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org .../net/test_vxlan_fdb_changelink.sh | 39 ++++++++++++------- 1 file changed, 24 insertions(+), 15 deletions(-) diff --git a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh index 2d442cdab11e..6f2bca4b346c 100755 --- a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh +++ b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh @@ -1,29 +1,38 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -# Check FDB default-remote handling across "ip link set". +ALL_TESTS=" + test_set_remote +" +source lib.sh check_remotes() { local what=$1; shift local N=$(bridge fdb sh dev vx | grep 00:00:00:00:00:00 | wc -l) - echo -ne "expected two remotes after $what\t" - if [[ $N != 2 ]]; then - echo "[FAIL]" - EXIT_STATUS=1 - else - echo "[ OK ]" - fi + ((N == 2)) + check_err $? "expected 2 remotes after $what, got $N" } -ip link add name vx up type vxlan id 2000 dstport 4789 -bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent -bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent -check_remotes "fdb append" +# Check FDB default-remote handling across "ip link set". +test_set_remote() +{ + RET=0 -ip link set dev vx type vxlan remote 192.0.2.30 -check_remotes "link set" + ip_link_add vx up type vxlan id 2000 dstport 4789 + bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent + bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent + check_remotes "fdb append" + + ip link set dev vx type vxlan remote 192.0.2.30 + check_remotes "link set" + + log_test 'FDB default-remote handling across "ip link set"' +} + +trap defer_scopes_cleanup EXIT + +tests_run -ip link del dev vx exit $EXIT_STATUS -- 2.47.0

2 months, 1 week

1
0
0 0

[PATCH net-next v2 3/5] selftests: forwarding: lib: Move require_command to net, generalize

by Petr Machata

This helper could be useful to more than just forwarding tests. Move it upstairs and port over to log_test_skip(). Split the function into two parts: the bit that actually checks and reports skip, which is in a new function check_command(). And a bit that exits the test script if the check fails. This allows users consistent checking behavior while giving an option to bail out from a single test without bailing out of the whole script. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor(a)blackwall.org> --- Notes: CC: Simon Horman <horms(a)kernel.org> CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org tools/testing/selftests/net/forwarding/lib.sh | 10 ---------- tools/testing/selftests/net/lib.sh | 19 +++++++++++++++++++ 2 files changed, 19 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 8de80acf249e..508f3c700d71 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -291,16 +291,6 @@ if [[ "$CHECK_TC" = "yes" ]]; then check_tc_version fi -require_command() -{ - local cmd=$1; shift - - if [[ ! -x "$(command -v "$cmd")" ]]; then - echo "SKIP: $cmd not installed" - exit $ksft_skip - fi -} - # IPv6 support was added in v3.0 check_mtools_version() { diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index 0bd9a038a1f0..975be4fdbcdb 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -450,6 +450,25 @@ kill_process() { kill $pid && wait $pid; } 2>/dev/null } +check_command() +{ + local cmd=$1; shift + + if [[ ! -x "$(command -v "$cmd")" ]]; then + log_test_skip "$cmd not installed" + return $EXIT_STATUS + fi +} + +require_command() +{ + local cmd=$1; shift + + if ! check_command "$cmd"; then + exit $EXIT_STATUS + fi +} + ip_link_add() { local name=$1; shift -- 2.47.0

2 months, 1 week

1
0
0 0

[PATCH v7 0/3] scanf: convert self-test to KUnit

by Tamir Duberstein

This is one of just 3 remaining "Test Module" kselftests (the others being bitmap and printf), the rest having been converted to KUnit. In addition to the enclosed patch, please consider this an RFC on the removal of the "Test Module" kselftest machinery. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 scanf Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v7: - Remove redundant debug logs. (Petr Mladek) - Drop Petr's Acked-by. - Use original test assertions as KUNIT_*_EQ_MSG produces hard-to-parse messages. The new failure output is: vsscanf("0 1e 3e43 31f0 0 0 5797 9c70", "%1hx %2hx %4hx %4hx %1hx %1hx %4hx %4hx", ...) expected 837828163 got 1044578334 not ok 1 " " # numbers_list_field_width_val_width: ASSERTION FAILED at lib/scanf_kunit.c:92 vsscanf("dc2:1c:0:3531:2621:5172:1:7", "%3hx:%2hx:%1hx:%4hx:%4hx:%4hx:%1hx:%1hx", ...) expected 892403712 got 28 not ok 2 ":" # numbers_list_field_width_val_width: ASSERTION FAILED at lib/scanf_kunit.c:92 vsscanf("e083,8f6e,b,70ca,1,1,aab1,10e4", "%4hx,%4hx,%1hx,%4hx,%1hx,%1hx,%4hx,%4hx", ...) expected 1892286475 got 757614 not ok 3 "," # numbers_list_field_width_val_width: ASSERTION FAILED at lib/scanf_kunit.c:92 vsscanf("2e72-8435-1-2fc-7cbd-c2f1-7158-2b41", "%4hx-%4hx-%1hx-%3hx-%4hx-%4hx-%4hx-%4hx", ...) expected 50069505 got 99381 not ok 4 "-" # numbers_list_field_width_val_width: ASSERTION FAILED at lib/scanf_kunit.c:92 vsscanf("403/0/17/1/11e7/1/1fe8/34ba", "%3hx/%1hx/%2hx/%1hx/%4hx/%1hx/%4hx/%4hx", ...) expected 65559 got 1507328 not ok 5 "/" # numbers_list_field_width_val_width: pass:0 fail:5 skip:0 total:5 not ok 4 numbers_list_field_width_val_width # numbers_slice: ASSERTION FAILED at lib/scanf_kunit.c:92 vsscanf("3c87eac0f4afa1f9231da52", "%1hx%4hx%4hx%4hx%1hx%4hx%4hx%1hx", ...) expected 1257942031 got 2886715518 - Link to v6: https://lore.kernel.org/r/20250210-scanf-kunit-convert-v6-0-4d583d07f92d@gm… Changes in v6: - s/at boot/at runtime/ for consistency with the printf series. - Go back to kmalloc. (Geert Uytterhoeven) - Link to v5: https://lore.kernel.org/r/20250210-scanf-kunit-convert-v5-0-8e64f3a7de99@gm… Changes in v5: - Remove extraneous trailing newlines from failure messages. - Replace `pr_debug` with `kunit_printk`. - Use static char arrays instead of kmalloc. - Drop KUnit boilerplate from CONFIG_SCANF_KUNIT_TEST help text. - Drop arch changes. - Link to v4: https://lore.kernel.org/r/20250207-scanf-kunit-convert-v4-0-a23e2afaede8@gm… Changes in v4: - Bake `test` into various macros, greatly reducing diff noise. - Revert control flow changes. - Link to v3: https://lore.kernel.org/r/20250204-scanf-kunit-convert-v3-0-386d7c3ee714@gm… Changes in v3: - Reduce diff noise in lib/Makefile. (Petr Mladek) - Split `scanf_test` into a few test cases. New output: : =================== scanf (10 subtests) ==================== : [PASSED] numbers_simple : ====================== numbers_list ======================= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ================== [PASSED] numbers_list =================== : ============ numbers_list_field_width_typemax ============= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======== [PASSED] numbers_list_field_width_typemax ========= : =========== numbers_list_field_width_val_width ============ : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======= [PASSED] numbers_list_field_width_val_width ======== : [PASSED] numbers_slice : [PASSED] numbers_prefix_overflow : [PASSED] test_simple_strtoull : [PASSED] test_simple_strtoll : [PASSED] test_simple_strtoul : [PASSED] test_simple_strtol : ====================== [PASSED] scanf ====================== : ============================================================ : Testing complete. Ran 22 tests: passed: 22 : Elapsed time: 5.517s total, 0.001s configuring, 5.440s building, 0.067s running - Link to v2: https://lore.kernel.org/r/20250203-scanf-kunit-convert-v2-1-277a618d804e@gm… Changes in v2: - Rename lib/{test_scanf.c => scanf_kunit.c}. (Andy Shevchenko) - Link to v1: https://lore.kernel.org/r/20250131-scanf-kunit-convert-v1-1-0976524f0eba@gm… --- Tamir Duberstein (3): scanf: remove redundant debug logs scanf: convert self-test to KUnit scanf: break kunit into test cases MAINTAINERS | 2 +- lib/Kconfig.debug | 12 +- lib/Makefile | 2 +- lib/{test_scanf.c => scanf_kunit.c} | 270 +++++++++++++++++------------------ tools/testing/selftests/lib/Makefile | 2 +- tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/scanf.sh | 4 - 7 files changed, 143 insertions(+), 150 deletions(-) --- base-commit: a64dcfb451e254085a7daee5fe51bf22959d52d3 change-id: 20250131-scanf-kunit-convert-f70dc33bb34c Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 1 week

3
18
0 0

[PATCH][next] KVM: selftests: Fix spelling mistake "Unabled" -> "Unable"

by Colin Ian King

There is a spelling mistake in a TEST_FAIL message. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/kvm/lib/kvm_util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/lib/kvm_util.c b/tools/testing/selftests/kvm/lib/kvm_util.c index b1c3c7260902..279ad8946040 100644 --- a/tools/testing/selftests/kvm/lib/kvm_util.c +++ b/tools/testing/selftests/kvm/lib/kvm_util.c @@ -2283,7 +2283,7 @@ void kvm_get_stat(struct kvm_binary_stats *stats, const char *name, return; } - TEST_FAIL("Unabled to find stat '%s'", name); + TEST_FAIL("Unable to find stat '%s'", name); } __weak void kvm_arch_vm_post_create(struct kvm_vm *vm) -- 2.47.2

2 months, 1 week

2
1
0 0

[PATCH net-next v19 00/26] Introducing OpenVPN Data Channel Offload

by Antonio Quartulli

All minor and major reported problems have been finally addressed. Big thanks to Sabrina, who took the time to guide me through converting the peer socket to an RCU pointer. This patchset comes with an extra patch for .mailmap to remove my @openvpn.net address from the file, otherwise git won't allow me to send patches from this address. Notable changes since v18: * ovpnstruct.h renamed to ovpnpriv.h to reflect new struct name * removed peers release upon NETDEV_DOWN * moved netdev_put() to after call_rcu() in ovpn_peer_release() * removed DEBUG_NET_WARN_ON_ONCE in case of mismatching peer in peer_del_p2p() * turned peer->sock into RCU pointer to be able to guarantee its validity in every context (thanks Sabrina for this!) ** the point above forced various socket handling functions to change into using a properly dereferenced RCU pointer instead of accessing peer->sock directly * ensured peer->sock is NULLified upon release so that other contexts have a way to check if the member carries a valid pointer or not * fixed ovpn_opcode_from_skb()'s comment about accessing 4 bytes (not 1) * improved ovpn_udp_encap_recv()'s comment wrt various packet types * ensured that 'iv' in ovpn_aead_crypt/decrypt() is malloc'd and carried in the skb's cb for async crypto usage * added missing ovpn_crypto_key_slot_put() in ovpn_encrypt_one() error path * TCP TX work item moved from ovpn_peer to ovpn_socket to ensure it stays alive along with the socket (peer may disappear earlier during release) * pulled 4 bytes (instead of 1) before calling ovpn_opcode_from_skb() in ovpn_tcp_rcv() * added missing kfree_skb() in ovpn_tcp_socket_detach() * moved call to ovpn_mp_alloc() to ndo_init() to ensure it could always be rolled back in case of register_netdevice() failure * splitted by_vpn_addr hashtables into by_vpn_addr4 and by_vpn_addr6 so that peers assigned a v4 or a v6 can be hashed separately. This avoids hash_entry offset mix ups during entries iterations * changed ovpn_nl_attr_sockaddr_remote() into returning just bool * added a few more consistency checks in peer_new/peer_set * added completion member to peer to signal when socket detachment has finished and thus allow peer_del call to happily terminate (thanks Sabrina again!) * extended selftest script with "peer removal during traffic exchange" Please note that some patches were already reviewed/tested by a few people. These patches have retained the tags as they have hardly been touched. The latest code can also be found at: https://github.com/OpenVPN/linux-kernel-ovpn NOTE: TCP tests are still showing the following warning while running iperf. I have analysed the report several times, but it definitely looks like a false positive to me, so nothing to worry about. Basically the lockdep engine gets confused thinking that we are acquiring the lock twice on the same sock, but actually: 1) the kernel is first locking the 'iperf' (user) TCP socket; 2) ovpn is later locking the underlying TCP trasport socket. So there is NO risk of deadlock (and indeed nothing hangs), but I couldn't find a way to make the warning go away. Here it is: [ 1056.319348] ============================================ [ 1056.319740] WARNING: possible recursive locking detected [ 1056.319740] 6.14.0-rc1-00217-g30aa34e21028-dirty #111 Tainted: G O [ 1056.319740] -------------------------------------------- [ 1056.319740] iperf3/1438 is trying to acquire lock: [ 1056.319740] ffff88811ea10218 (slock-AF_INET){+.-.}-{3:3}, at: ovpn_tcp_send_skb+0xef/0x490 [ovpn] [ 1056.319740] but task is already holding lock: [ 1056.319740] ffff8881112b1c98 (slock-AF_INET){+.-.}-{3:3}, at: tcp_delack_timer+0xaa/0x2e0 [ 1056.319740] other info that might help us debug this: [ 1056.319740] Possible unsafe locking scenario: [ 1056.319740] CPU0 [ 1056.319740] ---- [ 1056.319740] lock(slock-AF_INET); [ 1056.319740] lock(slock-AF_INET); [ 1056.319740] *** DEADLOCK *** [ 1056.319740] May be due to missing lock nesting notation [ 1056.319740] 6 locks held by iperf3/1438: [ 1056.319740] #0: ffffc90000400c28 ((&icsk->icsk_delack_timer)){+.-.}-{0:0}, at: call_timer_fn+0x102/0x230 [ 1056.319740] #1: ffff8881112b1c98 (slock-AF_INET){+.-.}-{3:3}, at: tcp_delack_timer+0xaa/0x2e0 [ 1056.319740] #2: ffffffff85ef2b20 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x68/0x1190 [ 1056.319740] #3: ffffffff85ef2b20 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0x2d4/0x1bb0 [ 1056.319740] #4: ffffffff85ef2ac0 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x1fc/0xee0 [ 1056.319740] #5: ffffffff85ef2b20 (rcu_read_lock){....}-{1:3}, at: ovpn_encrypt_post+0x168/0x5d0 [ovpn] [ 1056.319740] stack backtrace: [ 1056.319740] CPU: 4 UID: 0 PID: 1438 Comm: iperf3 Tainted: G O 6.14.0-rc1-00217-g30aa34e21028-dirty #111 [ 1056.319740] Tainted: [O]=OOT_MODULE [ 1056.319740] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-20240910_120124-localhost 04/01/2014 [ 1056.319740] Call Trace: [ 1056.319740] <IRQ> [ 1056.319740] dump_stack_lvl+0x75/0xb0 [ 1056.319740] dump_stack+0x14/0x16 [ 1056.319740] print_deadlock_bug.cold+0xbd/0xc7 [ 1056.319740] validate_chain+0x6db/0xe00 [ 1056.319740] ? kfree_sensitive+0x63/0x70 [ 1056.319740] ? check_prev_add+0xa60/0xa60 [ 1056.319740] ? mark_lock+0x34/0x2d0 [ 1056.319740] ? check_wait_context.isra.0+0x245/0x6a0 [ 1056.319740] __lock_acquire+0x6ed/0x1000 [ 1056.319740] lock_acquire+0x182/0x3c0 [ 1056.319740] ? ovpn_tcp_send_skb+0xef/0x490 [ovpn] [ 1056.319740] ? __lock_acquire+0x1000/0x1000 [ 1056.319740] ? ovpn_encrypt_post+0x168/0x5d0 [ovpn] [ 1056.319740] ? __lock_acquire+0x1000/0x1000 [ 1056.319740] ? __kasan_slab_free+0x47/0x50 [ 1056.319740] _raw_spin_lock+0x36/0x50 [ 1056.319740] ? ovpn_tcp_send_skb+0xef/0x490 [ovpn] [ 1056.319740] ovpn_tcp_send_skb+0xef/0x490 [ovpn] [ 1056.319740] ovpn_encrypt_post+0x388/0x5d0 [ovpn] [ 1056.319740] ovpn_send+0x2a9/0x720 [ovpn] [ 1056.319740] ? ovpn_encrypt_post+0x5d0/0x5d0 [ovpn] [ 1056.319740] ovpn_net_xmit+0x5e1/0xa40 [ovpn] [ 1056.319740] ? ovpn_send+0x720/0x720 [ovpn] [ 1056.319740] dev_hard_start_xmit+0x1c4/0x350 [ 1056.319740] __dev_queue_xmit+0x477/0xee0 [ 1056.319740] ? netdev_core_pick_tx+0x2b0/0x2b0 [ 1056.319740] ? selinux_ip_postroute_compat+0x460/0x460 [ 1056.319740] neigh_direct_output+0x17/0x20 [ 1056.319740] ip_finish_output2+0x6fd/0x1bb0 [ 1056.319740] ? ip_fragment.constprop.0+0x220/0x220 [ 1056.319740] ? ip_frag_next+0xcf0/0xcf0 [ 1056.319740] __ip_finish_output+0x2f4/0x530 [ 1056.319740] ip_output+0x166/0x560 [ 1056.319740] ? __ip_local_out+0x44d/0x800 [ 1056.319740] ? ip_finish_output+0x20/0x20 [ 1056.319740] ? __ip_finish_output+0x530/0x530 [ 1056.319740] ? __kasan_check_write+0x18/0x20 [ 1056.319740] __ip_queue_xmit+0x6ec/0x1190 [ 1056.319740] ip_queue_xmit+0x4e/0x70 [ 1056.319740] __tcp_transmit_skb+0x17ce/0x3480 [ 1056.319740] ? __tcp_select_window+0x1700/0x1700 [ 1056.319740] ? __build_skb_around+0x23d/0x350 [ 1056.319740] __tcp_send_ack+0x393/0x700 [ 1056.319740] tcp_send_ack+0x43/0x50 [ 1056.319740] tcp_delack_timer_handler+0x2b2/0x440 [ 1056.319740] ? tcp_clamp_probe0_to_user_timeout+0x110/0x110 [ 1056.319740] tcp_delack_timer+0x1c9/0x2e0 [ 1056.319740] ? call_timer_fn+0x102/0x230 [ 1056.319740] ? tcp_delack_timer_handler+0x440/0x440 [ 1056.319740] call_timer_fn+0x151/0x230 [ 1056.319740] ? call_timer_fn+0x102/0x230 [ 1056.319740] ? trace_timer_expire_entry+0x1e0/0x1e0 [ 1056.319740] __run_timers+0x62f/0x950 [ 1056.319740] ? tcp_delack_timer_handler+0x440/0x440 [ 1056.319740] ? call_timer_fn+0x230/0x230 [ 1056.319740] ? __kasan_check_write+0x18/0x20 [ 1056.319740] ? trace_irq_disable+0x160/0x1e0 [ 1056.319740] run_timer_softirq+0x156/0x260 [ 1056.319740] ? __run_timers+0x950/0x950 [ 1056.319740] handle_softirqs+0x208/0x5d0 [ 1056.319740] ? trace_softirq_exit+0x1d0/0x1d0 [ 1056.319740] ? trace_preempt_on+0x21/0x30 [ 1056.319740] __irq_exit_rcu+0xc5/0x100 [ 1056.319740] irq_exit_rcu+0x12/0x20 [ 1056.319740] sysvec_apic_timer_interrupt+0x84/0xb0 [ 1056.319740] </IRQ> [ 1056.319740] <TASK> [ 1056.319740] asm_sysvec_apic_timer_interrupt+0x1f/0x30 [ 1056.319740] RIP: 0010:acpi_pm_read+0x14/0x20 [ 1056.319740] Code: dd 7a 04 31 f6 48 89 e5 ff d0 5d c3 c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 0f 1f 44 00 00 55 8b 15 10 cc 2c 03 48 89 e5 ed <25> ff ff ff 00 5d c3 0f 1f 44 00 00 f3 0f 1e fa 0f 1f 44 00 00 8b [ 1056.319740] RSP: 0018:ffffc90002277bf8 EFLAGS: 00000246 [ 1056.319740] RAX: 000000000097dc75 RBX: dffffc0000000000 RCX: ffffffff817c4b93 [ 1056.319740] RDX: 0000000000000608 RSI: 0000000000000000 RDI: ffffffff868a5960 [ 1056.319740] RBP: ffffc90002277bf8 R08: 0000000000000001 R09: 0000000000000000 [ 1056.319740] R10: 0000000000000001 R11: 0000000000000000 R12: fffff5200044ef8e [ 1056.319740] R13: ffffc90002277c70 R14: 0000000000034608 R15: ffffffff868a5960 [ 1056.319740] ? __x64_sys_gettimeofday+0xc3/0x1a0 [ 1056.319740] ktime_get_real_ts64+0xcd/0x2d0 [ 1056.319740] __x64_sys_gettimeofday+0xc3/0x1a0 [ 1056.319740] ? put_itimerspec64+0x190/0x190 [ 1056.319740] x64_sys_call+0x1741/0x17d0 [ 1056.319740] do_syscall_64+0xd9/0x1b0 [ 1056.319740] ? syscall_exit_to_user_mode+0xd4/0x1e0 [ 1056.319740] ? do_syscall_64+0xe6/0x1b0 [ 1056.319740] ? syscall_exit_to_user_mode+0xd4/0x1e0 [ 1056.319740] ? do_syscall_64+0xe6/0x1b0 [ 1056.319740] ? __might_fault+0xb9/0x120 [ 1056.319740] ? __might_fault+0xee/0x120 [ 1056.319740] ? syscall_exit_to_user_mode+0xd4/0x1e0 [ 1056.319740] ? do_syscall_64+0xe6/0x1b0 [ 1056.319740] ? syscall_exit_to_user_mode+0xd4/0x1e0 [ 1056.319740] ? do_syscall_64+0xe6/0x1b0 [ 1056.319740] ? do_syscall_64+0xe6/0x1b0 [ 1056.319740] ? do_syscall_64+0xe6/0x1b0 [ 1056.319740] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 1056.319740] RIP: 0033:0x7fa5fb82dabb [ 1056.319740] Code: e8 26 89 c0 48 89 47 08 48 85 f6 75 1e 31 c0 c3 81 3d 59 b5 ff ff ff ff ff 7f 74 76 f3 90 e9 3c ff ff ff b8 60 00 00 00 0f 05 <c3> 81 3d 3e b5 ff ff ff ff ff 7f 48 8d 15 33 b5 ff ff 48 8d 05 2c [ 1056.319740] RSP: 002b:00007ffd9d3763b8 EFLAGS: 00000297 ORIG_RAX: 0000000000000060 [ 1056.319740] RAX: ffffffffffffffda RBX: 000055a374dfb260 RCX: 00007fa5fb82dabb [ 1056.319740] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffd9d3763c0 [ 1056.319740] RBP: 00007ffd9d3763d0 R08: 0000000000000000 R09: 0000000000034608 [ 1056.319740] R10: 00007fa5fb829000 R11: 0000000000000297 R12: 00007ffd9d376450 [ 1056.319740] R13: 00007ffd9d3763c0 R14: 0000000000000001 R15: 0000000000000001 [ 1056.319740] </TASK> Thanks a lot! Best Regards, Antonio Quartulli OpenVPN Inc. --- Antonio Quartulli (26): net: introduce OpenVPN Data Channel Offload (ovpn) ovpn: add basic netlink support ovpn: add basic interface creation/destruction/management routines ovpn: keep carrier always on for MP interfaces ovpn: introduce the ovpn_peer object ovpn: introduce the ovpn_socket object ovpn: implement basic TX path (UDP) ovpn: implement basic RX path (UDP) ovpn: implement packet processing ovpn: store tunnel and transport statistics ipv6: export inet6_stream_ops via EXPORT_SYMBOL_GPL ovpn: implement TCP transport skb: implement skb_send_sock_locked_with_flags() ovpn: add support for MSG_NOSIGNAL in tcp_sendmsg ovpn: implement multi-peer support ovpn: implement peer lookup logic ovpn: implement keepalive mechanism ovpn: add support for updating local UDP endpoint ovpn: add support for peer floating ovpn: implement peer add/get/dump/delete via netlink ovpn: implement key add/get/del/swap via netlink ovpn: kill key and notify userspace in case of IV exhaustion ovpn: notify userspace when a peer is deleted ovpn: add basic ethtool support testing/selftests: add test tool and scripts for ovpn module mailmap: remove unwanted entry for Antonio Quartulli .mailmap | 1 - Documentation/netlink/specs/ovpn.yaml | 372 +++ Documentation/netlink/specs/rt_link.yaml | 16 + MAINTAINERS | 11 + drivers/net/Kconfig | 15 + drivers/net/Makefile | 1 + drivers/net/ovpn/Makefile | 22 + drivers/net/ovpn/bind.c | 55 + drivers/net/ovpn/bind.h | 101 + drivers/net/ovpn/crypto.c | 211 ++ drivers/net/ovpn/crypto.h | 145 ++ drivers/net/ovpn/crypto_aead.c | 408 ++++ drivers/net/ovpn/crypto_aead.h | 33 + drivers/net/ovpn/io.c | 462 ++++ drivers/net/ovpn/io.h | 34 + drivers/net/ovpn/main.c | 346 +++ drivers/net/ovpn/main.h | 14 + drivers/net/ovpn/netlink-gen.c | 213 ++ drivers/net/ovpn/netlink-gen.h | 41 + drivers/net/ovpn/netlink.c | 1248 ++++++++++ drivers/net/ovpn/netlink.h | 18 + drivers/net/ovpn/ovpnpriv.h | 57 + drivers/net/ovpn/peer.c | 1273 +++++++++++ drivers/net/ovpn/peer.h | 164 ++ drivers/net/ovpn/pktid.c | 129 ++ drivers/net/ovpn/pktid.h | 87 + drivers/net/ovpn/proto.h | 118 + drivers/net/ovpn/skb.h | 61 + drivers/net/ovpn/socket.c | 223 ++ drivers/net/ovpn/socket.h | 51 + drivers/net/ovpn/stats.c | 21 + drivers/net/ovpn/stats.h | 47 + drivers/net/ovpn/tcp.c | 557 +++++ drivers/net/ovpn/tcp.h | 34 + drivers/net/ovpn/udp.c | 421 ++++ drivers/net/ovpn/udp.h | 24 + include/linux/skbuff.h | 2 + include/uapi/linux/if_link.h | 15 + include/uapi/linux/ovpn.h | 111 + include/uapi/linux/udp.h | 1 + net/core/skbuff.c | 18 +- net/ipv6/af_inet6.c | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/net/ovpn/.gitignore | 2 + tools/testing/selftests/net/ovpn/Makefile | 17 + tools/testing/selftests/net/ovpn/config | 10 + tools/testing/selftests/net/ovpn/data64.key | 5 + tools/testing/selftests/net/ovpn/ovpn-cli.c | 2377 ++++++++++++++++++++ tools/testing/selftests/net/ovpn/tcp_peers.txt | 5 + .../testing/selftests/net/ovpn/test-chachapoly.sh | 9 + tools/testing/selftests/net/ovpn/test-float.sh | 9 + tools/testing/selftests/net/ovpn/test-tcp.sh | 9 + tools/testing/selftests/net/ovpn/test.sh | 192 ++ tools/testing/selftests/net/ovpn/udp_peers.txt | 5 + 54 files changed, 9817 insertions(+), 6 deletions(-) --- base-commit: 39f54262ba499d862420a97719d2f0eea0cbd394 change-id: 20241002-b4-ovpn-eeee35c694a2 Best regards, -- Antonio Quartulli <antonio(a)openvpn.net>

2 months, 1 week

4
36
0 0

[PATCH v2 00/15] riscv: add SBI FWFT misaligned exception delegation support

by Clément Léger

The SBI Firmware Feature extension allows the S-mode to request some specific features (either hardware or software) to be enabled. This series uses this extension to request misaligned access exception delegation to S-mode in order to let the kernel handle it. It also adds support for the KVM FWFT SBI extension based on the misaligned access handling infrastructure. FWFT SBI extension is part of the SBI V3.0 specifications [1]. It can be tested using the qemu provided at [2] which contains the series from [3]. kvm-unit-tests [4] can be used inside kvm to tests the correct delegation of misaligned exceptions. Upstream OpenSBI can be used. The tests can be run using the included kselftest: $ qemu-system-riscv64 \ -cpu rv64,trap-misaligned-access=true,v=true \ -M virt \ -m 1024M \ -bios fw_dynamic.bin \ -kernel Image ... # ./misaligned TAP version 13 1..23 # Starting 23 tests from 1 test cases. # RUN global.gp_load_lh ... # OK global.gp_load_lh ok 1 global.gp_load_lh # RUN global.gp_load_lhu ... # OK global.gp_load_lhu ok 2 global.gp_load_lhu # RUN global.gp_load_lw ... # OK global.gp_load_lw ok 3 global.gp_load_lw # RUN global.gp_load_lwu ... # OK global.gp_load_lwu ok 4 global.gp_load_lwu # RUN global.gp_load_ld ... # OK global.gp_load_ld ok 5 global.gp_load_ld # RUN global.gp_load_c_lw ... # OK global.gp_load_c_lw ok 6 global.gp_load_c_lw # RUN global.gp_load_c_ld ... # OK global.gp_load_c_ld ok 7 global.gp_load_c_ld # RUN global.gp_load_c_ldsp ... # OK global.gp_load_c_ldsp ok 8 global.gp_load_c_ldsp # RUN global.gp_load_sh ... # OK global.gp_load_sh ok 9 global.gp_load_sh # RUN global.gp_load_sw ... # OK global.gp_load_sw ok 10 global.gp_load_sw # RUN global.gp_load_sd ... # OK global.gp_load_sd ok 11 global.gp_load_sd # RUN global.gp_load_c_sw ... # OK global.gp_load_c_sw ok 12 global.gp_load_c_sw # RUN global.gp_load_c_sd ... # OK global.gp_load_c_sd ok 13 global.gp_load_c_sd # RUN global.gp_load_c_sdsp ... # OK global.gp_load_c_sdsp ok 14 global.gp_load_c_sdsp # RUN global.fpu_load_flw ... # OK global.fpu_load_flw ok 15 global.fpu_load_flw # RUN global.fpu_load_fld ... # OK global.fpu_load_fld ok 16 global.fpu_load_fld # RUN global.fpu_load_c_fld ... # OK global.fpu_load_c_fld ok 17 global.fpu_load_c_fld # RUN global.fpu_load_c_fldsp ... # OK global.fpu_load_c_fldsp ok 18 global.fpu_load_c_fldsp # RUN global.fpu_store_fsw ... # OK global.fpu_store_fsw ok 19 global.fpu_store_fsw # RUN global.fpu_store_fsd ... # OK global.fpu_store_fsd ok 20 global.fpu_store_fsd # RUN global.fpu_store_c_fsd ... # OK global.fpu_store_c_fsd ok 21 global.fpu_store_c_fsd # RUN global.fpu_store_c_fsdsp ... # OK global.fpu_store_c_fsdsp ok 22 global.fpu_store_c_fsdsp # RUN global.gen_sigbus ... [12797.988647] misaligned[618]: unhandled signal 7 code 0x1 at 0x0000000000014dc0 in misaligned[4dc0,10000+76000] [12797.988990] CPU: 0 UID: 0 PID: 618 Comm: misaligned Not tainted 6.13.0-rc6-00008-g4ec4468967c9-dirty #51 [12797.989169] Hardware name: riscv-virtio,qemu (DT) [12797.989264] epc : 0000000000014dc0 ra : 0000000000014d00 sp : 00007fffe165d100 [12797.989407] gp : 000000000008f6e8 tp : 0000000000095760 t0 : 0000000000000008 [12797.989544] t1 : 00000000000965d8 t2 : 000000000008e830 s0 : 00007fffe165d160 [12797.989692] s1 : 000000000000001a a0 : 0000000000000000 a1 : 0000000000000002 [12797.989831] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffffdeadbeef [12797.989964] a5 : 000000000008ef61 a6 : 626769735f6e0000 a7 : fffffffffffff000 [12797.990094] s2 : 0000000000000001 s3 : 00007fffe165d838 s4 : 00007fffe165d848 [12797.990238] s5 : 000000000000001a s6 : 0000000000010442 s7 : 0000000000010200 [12797.990391] s8 : 000000000000003a s9 : 0000000000094508 s10: 0000000000000000 [12797.990526] s11: 0000555567460668 t3 : 00007fffe165d070 t4 : 00000000000965d0 [12797.990656] t5 : fefefefefefefeff t6 : 0000000000000073 [12797.990756] status: 0000000200004020 badaddr: 000000000008ef61 cause: 0000000000000006 [12797.990911] Code: 8793 8791 3423 fcf4 3783 fc84 c737 dead 0713 eef7 (c398) 0001 # OK global.gen_sigbus ok 23 global.gen_sigbus # PASSED: 23 / 23 tests passed. # Totals: pass:23 fail:0 xfail:0 xpass:0 skip:0 error:0 With kvm-tools: # lkvm run -k sbi.flat -m 128 Info: # lkvm run -k sbi.flat -m 128 -c 1 --name guest-97 Info: Removed ghost socket file "/root/.lkvm//guest-97.sock". ########################################################################## # kvm-unit-tests ########################################################################## ... [test messages elided] PASS: sbi: fwft: FWFT extension probing no error PASS: sbi: fwft: get/set reserved feature 0x6 error == SBI_ERR_DENIED PASS: sbi: fwft: get/set reserved feature 0x3fffffff error == SBI_ERR_DENIED PASS: sbi: fwft: get/set reserved feature 0x80000000 error == SBI_ERR_DENIED PASS: sbi: fwft: get/set reserved feature 0xbfffffff error == SBI_ERR_DENIED PASS: sbi: fwft: misaligned_deleg: Get misaligned deleg feature no error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature invalid value error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature invalid value error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value no error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value 0 PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value no error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value 1 PASS: sbi: fwft: misaligned_deleg: Verify misaligned load exception trap in supervisor SUMMARY: 50 tests, 2 unexpected failures, 12 skipped This series is available at [6]. Link: https://github.com/riscv-non-isa/riscv-sbi-doc/releases/download/vv3.0-rc2/… [1] Link: https://github.com/rivosinc/qemu/tree/dev/cleger/misaligned [2] Link: https://lore.kernel.org/all/20241211211933.198792-3-fkonrad@amd.com/T/ [3] Link: https://github.com/clementleger/kvm-unit-tests/tree/dev/cleger/fwft_v1 [4] Link: https://github.com/clementleger/unaligned_test [5] Link: https://github.com/rivosinc/linux/tree/dev/cleger/fwft_v1 [6] --- V2: - Added Kselftest for misaligned testing - Added get_user() usage instead of __get_user() - Reenable interrupt when possible in misaligned access handling - Document that riscv supports unaligned-traps - Fix KVM extension state when an init function is present - Rework SBI misaligned accesses trap delegation code - Added support for CPU hotplugging - Added KVM SBI reset callback - Added reset for KVM SBI FWFT lock - Return SBI_ERR_DENIED_LOCKED when LOCK flag is set Clément Léger (15): riscv: add Firmware Feature (FWFT) SBI extensions definitions riscv: misaligned: request misaligned exception from SBI riscv: misaligned: use on_each_cpu() for scalar misaligned access probing riscv: misaligned: use correct CONFIG_ ifdef for misaligned_access_speed riscv: misaligned: move emulated access uniformity check in a function riscv: misaligned: add a function to check misalign trap delegability riscv: misaligned: factorize trap handling riscv: misaligned: enable IRQs while handling misaligned accesses riscv: misaligned: use get_user() instead of __get_user() Documentation/sysctl: add riscv to unaligned-trap supported archs selftests: riscv: add misaligned access testing RISC-V: KVM: add SBI extension init()/deinit() functions RISC-V: KVM: add SBI extension reset callback RISC-V: KVM: add support for FWFT SBI extension RISC-V: KVM: add support for SBI_FWFT_MISALIGNED_DELEG Documentation/admin-guide/sysctl/kernel.rst | 4 +- arch/riscv/include/asm/cpufeature.h | 8 +- arch/riscv/include/asm/kvm_host.h | 5 +- arch/riscv/include/asm/kvm_vcpu_sbi.h | 12 + arch/riscv/include/asm/kvm_vcpu_sbi_fwft.h | 37 +++ arch/riscv/include/asm/sbi.h | 33 +++ arch/riscv/include/uapi/asm/kvm.h | 1 + arch/riscv/kernel/traps.c | 57 ++-- arch/riscv/kernel/traps_misaligned.c | 138 +++++++++- arch/riscv/kernel/unaligned_access_speed.c | 11 +- arch/riscv/kvm/Makefile | 1 + arch/riscv/kvm/vcpu.c | 7 +- arch/riscv/kvm/vcpu_sbi.c | 58 ++++ arch/riscv/kvm/vcpu_sbi_fwft.c | 226 ++++++++++++++++ arch/riscv/kvm/vcpu_sbi_sta.c | 3 +- .../selftests/riscv/misaligned/.gitignore | 1 + .../selftests/riscv/misaligned/Makefile | 12 + .../selftests/riscv/misaligned/common.S | 33 +++ .../testing/selftests/riscv/misaligned/fpu.S | 180 +++++++++++++ tools/testing/selftests/riscv/misaligned/gp.S | 103 +++++++ .../selftests/riscv/misaligned/misaligned.c | 254 ++++++++++++++++++ 21 files changed, 1137 insertions(+), 47 deletions(-) create mode 100644 arch/riscv/include/asm/kvm_vcpu_sbi_fwft.h create mode 100644 arch/riscv/kvm/vcpu_sbi_fwft.c create mode 100644 tools/testing/selftests/riscv/misaligned/.gitignore create mode 100644 tools/testing/selftests/riscv/misaligned/Makefile create mode 100644 tools/testing/selftests/riscv/misaligned/common.S create mode 100644 tools/testing/selftests/riscv/misaligned/fpu.S create mode 100644 tools/testing/selftests/riscv/misaligned/gp.S create mode 100644 tools/testing/selftests/riscv/misaligned/misaligned.c -- 2.47.2

2 months, 1 week

3
23
0 0

[PATCH net-next v9 00/11] net: Improve netns handling in rtnetlink

by Xiao Liang

This patch series includes some netns-related improvements and fixes for rtnetlink, to make link creation more intuitive: 1) Creating link in another net namespace doesn't conflict with link names in current one. 2) Refector rtnetlink link creation. Create link in target namespace directly. So that # ip link add netns ns1 link-netns ns2 tun0 type gre ... will create tun0 in ns1, rather than create it in ns2 and move to ns1. And don't conflict with another interface named "tun0" in current netns. Patch 01 avoids link name conflict in different netns. To achieve 2), there're mainly 3 steps: - Patch 02 packs newlink() parameters into a struct, including the original "src_net" along with more netns context. No semantic changes are introduced. - Patch 03 ~ 07 converts device drivers to use the explicit netns extracted from params. - Patch 08 ~ 09 removes the old netns parameter, and converts rtnetlink to create device in target netns directly. Patch 10 ~ 11 adds some tests for link name and link netns. BTW please note there're some issues found in current code: - In amt_newlink() drivers/net/amt.c: amt->net = net; ... amt->stream_dev = dev_get_by_index(net, ... Uses net, but amt_lookup_upper_dev() only searches in dev_net. So the AMT device may not be properly deleted if it's in a different netns from lower dev. - In lowpan_newlink() in net/ieee802154/6lowpan/core.c: wdev = dev_get_by_index(dev_net(ldev), nla_get_u32(tb[IFLA_LINK])); Looks for IFLA_LINK in dev_net, but in theory the ifindex is defined in link netns. And thanks to Kuniyuki for fixing related issues in gtp and pfcp: https://lore.kernel.org/netdev/20250110014754.33847-1-kuniyu@amazon.com/ --- v9: - Change the prototype of macvlan_common_newlink(). - Minor fixes of coding style and local variables. v8: link: https://lore.kernel.org/all/20250113143719.7948-1-shaw.leon@gmail.com/ - Move dev and ext_ack out from param struct. - Validate link_net and dev_net are identical for 6lowpan. v7: link: https://lore.kernel.org/all/20250104125732.17335-1-shaw.leon@gmail.com/ - Add selftest kconfig. - Remove a duplicated test of ip6gre. v6: link: https://lore.kernel.org/all/20241218130909.2173-1-shaw.leon@gmail.com/ - Split prototype, driver and rtnetlink changes. - Add more tests for link netns. - Fix IPv6 tunnel net overwriten in ndo_init(). - Reorder variable declarations. - Exclude a ip_tunnel-specific patch. v5: link: https://lore.kernel.org/all/20241209140151.231257-1-shaw.leon@gmail.com/ - Fix function doc in batman-adv. - Include peer_net in rtnl newlink parameters. v4: link: https://lore.kernel.org/all/20241118143244.1773-1-shaw.leon@gmail.com/ - Pack newlink() parameters to a single struct. - Use ynl async_msg_queue.empty() in selftest. v3: link: https://lore.kernel.org/all/20241113125715.150201-1-shaw.leon@gmail.com/ - Drop "netns_atomic" flag and module parameter. Add netns parameter to newlink() instead, and convert drivers accordingly. - Move python NetNSEnter helper to net selftest lib. v2: link: https://lore.kernel.org/all/20241107133004.7469-1-shaw.leon@gmail.com/ - Check NLM_F_EXCL to ensure only link creation is affected. - Add self tests for link name/ifindex conflict and notifications in different netns. - Changes in dummy driver and ynl in order to add the test case. v1: link: https://lore.kernel.org/all/20241023023146.372653-1-shaw.leon@gmail.com/ Xiao Liang (11): rtnetlink: Lookup device in target netns when creating link rtnetlink: Pack newlink() params into struct net: Use link netns in newlink() of rtnl_link_ops ieee802154: 6lowpan: Validate link netns in newlink() of rtnl_link_ops net: ip_tunnel: Use link netns in newlink() of rtnl_link_ops net: ipv6: Use link netns in newlink() of rtnl_link_ops net: xfrm: Use link netns in newlink() of rtnl_link_ops rtnetlink: Remove "net" from newlink params rtnetlink: Create link directly in target net namespace selftests: net: Add python context manager for netns entering selftests: net: Add test cases for link and peer netns drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 9 +- drivers/net/amt.c | 11 +- drivers/net/bareudp.c | 9 +- drivers/net/bonding/bond_netlink.c | 6 +- drivers/net/can/dev/netlink.c | 4 +- drivers/net/can/vxcan.c | 7 +- .../ethernet/qualcomm/rmnet/rmnet_config.c | 9 +- drivers/net/geneve.c | 9 +- drivers/net/gtp.c | 10 +- drivers/net/ipvlan/ipvlan.h | 3 +- drivers/net/ipvlan/ipvlan_main.c | 8 +- drivers/net/ipvlan/ipvtap.c | 6 +- drivers/net/macsec.c | 9 +- drivers/net/macvlan.c | 21 +-- drivers/net/macvtap.c | 6 +- drivers/net/netkit.c | 14 +- drivers/net/pfcp.c | 9 +- drivers/net/ppp/ppp_generic.c | 9 +- drivers/net/team/team_core.c | 6 +- drivers/net/veth.c | 7 +- drivers/net/vrf.c | 5 +- drivers/net/vxlan/vxlan_core.c | 9 +- drivers/net/wireguard/device.c | 7 +- drivers/net/wireless/virtual/virt_wifi.c | 8 +- drivers/net/wwan/wwan_core.c | 16 +- include/linux/if_macvlan.h | 6 +- include/net/ip_tunnels.h | 5 +- include/net/rtnetlink.h | 40 ++++- net/8021q/vlan_netlink.c | 9 +- net/batman-adv/soft-interface.c | 9 +- net/bridge/br_netlink.c | 6 +- net/caif/chnl_net.c | 5 +- net/core/rtnetlink.c | 34 +++-- net/hsr/hsr_netlink.c | 12 +- net/ieee802154/6lowpan/core.c | 7 +- net/ipv4/ip_gre.c | 22 ++- net/ipv4/ip_tunnel.c | 10 +- net/ipv4/ip_vti.c | 9 +- net/ipv4/ipip.c | 9 +- net/ipv6/ip6_gre.c | 30 ++-- net/ipv6/ip6_tunnel.c | 19 ++- net/ipv6/ip6_vti.c | 15 +- net/ipv6/sit.c | 17 ++- net/xfrm/xfrm_interface_core.c | 15 +- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 5 + .../testing/selftests/net/lib/py/__init__.py | 2 +- tools/testing/selftests/net/lib/py/netns.py | 18 +++ tools/testing/selftests/net/link_netns.py | 141 ++++++++++++++++++ tools/testing/selftests/net/netns-name.sh | 10 ++ 50 files changed, 494 insertions(+), 179 deletions(-) create mode 100755 tools/testing/selftests/net/link_netns.py -- 2.48.1

2 months, 1 week

3
25
0 0

[PATCH net-next RESEND v7 0/3] netdev-genl: Add an xsk attribute to queues

by Joe Damato

Greetings: [Note: RESEND because apparently my gmail oauth2 client is breaking patches I send] Welcome to v7. Added CONFIG_XDP_SOCKETS to the selftests/driver/net kernel config in patch 3. Updated the xdp_helper.c to return -1 on AF_XDP non-existence, and updated queues.py to skip the test if AF_XDP does not exist (but fail in other failure cases). Tested on kernels with and without CONFIG_XDP_SOCKETS enabled. This is an attempt to followup on something Jakub asked me about [1], adding an xsk attribute to queues and more clearly documenting which queues are linked to NAPIs... After the RFC [2], Jakub suggested creating an empty nest for queues which have a pool, so I've adjusted this version to work that way. The nest can be extended in the future to express attributes about XSK as needed. Queues which are not used for AF_XDP do not have the xsk attribute present. I've run the included test on: - my mlx5 machine (via NETIF=) - without setting NETIF And the test seems to pass in both cases. Thanks, Joe [1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/ [2]: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ v7: - Added CONFIG_XDP_SOCKETS to selftests/driver/net/config as suggested by Stanislav. - Updated xdp_helper.c to return -1 for AF_XDP non-existence, but 1 for other failures. - Updated queues.py to mark test as skipped if AF_XDP does not exist. v6: https://lore.kernel.org/bpf/20250210193903.16235-1-jdamato@fastly.com/ - Added ifdefs for CONFIG_XDP_SOCKETS in patch 2 as Stanislav suggested. v5: https://lore.kernel.org/bpf/20250208041248.111118-1-jdamato@fastly.com/ - Removed unused ret variable from patch 2 as Simon suggested. v4: https://lore.kernel.org/lkml/20250207030916.32751-1-jdamato@fastly.com/ - Add patch 1, as suggested by Jakub, which adds an empty nest helper. - Use the helper in patch 2, which makes the code cleaner and prevents a possible bug. v3: https://lore.kernel.org/netdev/20250204191108.161046-1-jdamato@fastly.com/ - Change comment format in patch 2 to avoid kdoc warnings. No other changes. v2: https://lore.kernel.org/all/20250203185828.19334-1-jdamato@fastly.com/ - Switched from RFC to actual submission now that net-next is open - Adjusted patch 1 to include an empty nest as suggested by Jakub - Adjusted patch 2 to update the test based on changes to patch 1, and to incorporate some Python feedback from Jakub :) rfc: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ Joe Damato (3): netlink: Add nla_put_empty_nest helper netdev-genl: Add an XSK attribute to queues selftests: drv-net: Test queue xsk attribute Documentation/netlink/specs/netdev.yaml | 13 ++- include/net/netlink.h | 15 +++ include/uapi/linux/netdev.h | 6 ++ net/core/netdev-genl.c | 12 +++ tools/include/uapi/linux/netdev.h | 6 ++ .../testing/selftests/drivers/net/.gitignore | 2 + tools/testing/selftests/drivers/net/Makefile | 3 + tools/testing/selftests/drivers/net/config | 1 + tools/testing/selftests/drivers/net/queues.py | 42 +++++++- .../selftests/drivers/net/xdp_helper.c | 98 +++++++++++++++++++ 10 files changed, 194 insertions(+), 4 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/.gitignore create mode 100644 tools/testing/selftests/drivers/net/xdp_helper.c base-commit: 4079918ae720e842ed7dff65fedeb9980b374995 -- 2.43.0

2 months, 2 weeks

2
2
0 0

[PATCH bpf-next v2 0/3] bpf: Fix array bounds error with may_goto and add selftest

by Jiayuan Chen

Syzbot caught an array out-of-bounds bug [1]. It turns out that when the BPF program runs through do_misc_fixups(), it allocates an extra 8 bytes on the call stack, which eventually causes stack_depth to exceed 512. I was able to reproduce this issue probabilistically by enabling CONFIG_UBSAN=y and disabling CONFIG_BPF_JIT_ALWAYS_ON with the selfttest I provide in second patch(although it doesn't happen every time - I didn't dig deeper into why UBSAN behaves this way). Furthermore, if I set /proc/sys/net/core/bpf_jit_enable to 0 to disable the jit, a panic occurs, and the reason is the same, that bpf_func is assigned an incorrect address. [---[ end trace ]--- [Oops: general protection fault, probably for non-canonical address 0x100f0e0e0d090808: 0000 [#1] PREEMPT SMP NOPTI [Tainted: [W]=WARN, [O]=OOT_MODULE [RIP: 0010:bpf_test_run+0x1d2/0x360 [RSP: 0018:ffffafc7955178a0 EFLAGS: 00010246 [RAX: 100f0e0e0d090808 RBX: ffff8e9fdb2c4100 RCX: 0000000000000018 [RDX: 00000000002b5b18 RSI: ffffafc780497048 RDI: ffff8ea04d601700 [RBP: ffffafc780497000 R08: ffffafc795517a0c R09: 0000000000000000 [R10: 0000000000000000 R11: fefefefefefefeff R12: ffff8ea04d601700 [R13: ffffafc795517928 R14: ffffafc795517928 R15: 0000000000000000 [CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [CR2: 00007f181c064648 CR3: 00000001aa2be003 CR4: 0000000000770ef0 [DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [PKRU: 55555554 [Call Trace: [ <TASK> [ ? die_addr+0x36/0x90 [ ? exc_general_protection+0x237/0x430 [ ? asm_exc_general_protection+0x26/0x30 [ ? bpf_test_run+0x1d2/0x360 [ ? bpf_test_run+0x10d/0x360 [ ? __link_object+0x12a/0x1e0 [ ? slab_build_skb+0x23/0x130 [ ? kmem_cache_alloc_noprof+0x2ea/0x3f0 [ ? sk_prot_alloc+0xc2/0x120 [ bpf_prog_test_run_skb+0x21b/0x590 [ __sys_bpf+0x340/0xa80 [ __x64_sys_bpf+0x1e/0x30 --- v1 -> v2: Directly reject loading programs with a stack size greater than 512 when jit disabled.(Suggested by Alexei Starovoitov) https://lore.kernel.org/bpf/20250212135251.85487-1-mrpre@163.com/T/#u --- Jiayuan Chen (3): bpf: Fix array bounds error with may_goto selftests/bpf: Allow the program to select specific modes for testing selftests/bpf: Add selftest for may_goto kernel/bpf/core.c | 18 +++++-- kernel/bpf/verifier.c | 7 +++ tools/testing/selftests/bpf/progs/bpf_misc.h | 2 + .../selftests/bpf/progs/verifier_stack_ptr.c | 50 +++++++++++++++++++ tools/testing/selftests/bpf/test_loader.c | 27 ++++++++++ 5 files changed, 100 insertions(+), 4 deletions(-) -- 2.47.1

2 months, 2 weeks

2
9
0 0

[PATCH v1] selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB

by Mickaël Salaün

Since commit 5155cbcdbf03 ("af_unix: Add a prompt to CONFIG_AF_UNIX_OOB"), the Landlock selftests's configuration is not enough to build a minimal kernel. Because scoped_signal_test checks with the MSG_OOB flag, we need to enable CONFIG_AF_UNIX_OOB for tests: # RUN fown.no_sandbox.sigurg_socket ... # scoped_signal_test.c:420:sigurg_socket:Expected 1 (1) == send(client_socket, ".", 1, MSG_OOB) (-1) # sigurg_socket: Test terminated by assertion # FAIL fown.no_sandbox.sigurg_socket ... Cc: Florent Revest <revest(a)chromium.org> Cc: Günther Noack <gnoack(a)google.com> Signed-off-by: Mickaël Salaün <mic(a)digikod.net> --- tools/testing/selftests/landlock/config | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/landlock/config b/tools/testing/selftests/landlock/config index 29af19c4e9f9..361f94f8cb0d 100644 --- a/tools/testing/selftests/landlock/config +++ b/tools/testing/selftests/landlock/config @@ -1,3 +1,4 @@ +CONFIG_AF_UNIX_OOB=y CONFIG_CGROUPS=y CONFIG_CGROUP_SCHED=y CONFIG_INET=y -- 2.48.1

2 months, 2 weeks

2
1
0 0

Re: [PATCH v2 6/6] selftests/mm: remove local __NR_* definitions

by John Hubbard

On 2/13/25 3:32 AM, Li Wang wrote: > Hi John, > > On Thu, Feb 13, 2025 at 6:31 AM John Hubbard <jhubbard(a)nvidia.com <mailto:jhubbard@nvidia.com>> wrote: > > On 2/12/25 12:34 PM, Dave Hansen wrote: > > Hi John, > > > > On 6/13/24 19:30, John Hubbard wrote: > >> --- a/tools/testing/selftests/mm/protection_keys.c > >> +++ b/tools/testing/selftests/mm/protection_keys.c > >> @@ -42,7 +42,7 @@ > >> #include <sys/wait.h> > >> #include <sys/stat.h> > >> #include <fcntl.h> > >> -#include <unistd.h> > >> +#include <linux/unistd.h> > >> #include <sys/ptrace.h> > >> #include <setjmp.h> > > > > I'm not quite sure how but this broke the protection_keys.c selftest for > > me. Before this commit (a5c6bc590094a1a73cf6fa3f505e1945d2bf2461) things > > are fine. But after, I get: > > > > running PKEY tests for unsupported CPU/OS > > > > The "unsupported" test just makes a pkey_alloc() syscall. It's probably > > calling the wrong syscall number or something. > > > > I think it's still broken in mainline. What's the right fix? > > omg I think this is an asm-generic include mistake, I'll check > on it in an hour or so, in more depth. > > > I just found that mlock2_() return a wrong valuein mlock2-test, > I guess that was caused by including the wrong header file > <asm-generic/unistd.h>,which might define a different syscall > number than what the kernel uses on the test system. Agreed. > > Shouldn't we make use of <unistd.h> directly? Well, yes and no. For now, there appear to be two commits involved in causing these problems, and the __NR_* parts need to be reverted. I'll explain more when I post later today, but for the moment, the first, mseal- related commit below has some hints about how we got here: 504d8a5e0fd4 selftests/mm: mseal, self_elf: fix missing __NR_mseal a5c6bc590094 selftests/mm: remove local __NR_* definitions thanks, -- John Hubbard

2 months, 2 weeks

1
0
0 0

[PATCH v2 0/2] tools: Unify top-level quiet infrastructure

by Charlie Jenkins

The quiet infrastructure was moved out of Makefile.build to accomidate the new syscall table generation scripts in perf. Syscall table generation wanted to also be able to be quiet, so instead of again copying the code to set the quiet variables, the code was moved into Makefile.perf to be used globally. This was not the right solution. It should have been moved even further upwards in the call chain. Makefile.include is imported in many files so this seems like a proper place to put it. Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> --- Changes in v2: - Fix spacing around Q= (Andrii) - Link to v1: https://lore.kernel.org/r/20250203-quiet_tools-v1-0-d25c8956e59a@rivosinc.c… --- Charlie Jenkins (2): tools: Unify top-level quiet infrastructure tools: Remove redundant quiet setup tools/arch/arm64/tools/Makefile | 6 ----- tools/bpf/Makefile | 6 ----- tools/bpf/bpftool/Documentation/Makefile | 6 ----- tools/bpf/bpftool/Makefile | 6 ----- tools/bpf/resolve_btfids/Makefile | 2 -- tools/bpf/runqslower/Makefile | 5 +--- tools/build/Makefile | 8 +----- tools/lib/bpf/Makefile | 13 ---------- tools/lib/perf/Makefile | 13 ---------- tools/lib/thermal/Makefile | 13 ---------- tools/objtool/Makefile | 6 ----- tools/perf/Makefile.perf | 41 ------------------------------- tools/scripts/Makefile.include | 31 ++++++++++++++++++++++- tools/testing/selftests/bpf/Makefile.docs | 6 ----- tools/testing/selftests/hid/Makefile | 2 -- tools/thermal/lib/Makefile | 13 ---------- tools/tracing/latency/Makefile | 6 ----- tools/tracing/rtla/Makefile | 6 ----- tools/verification/rv/Makefile | 6 ----- 19 files changed, 32 insertions(+), 163 deletions(-) --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250203-quiet_tools-9a6ea9d65a19 -- - Charlie

2 months, 2 weeks

3
6
0 0

[PATCH v2] rseq/selftests: Fix riscv rseq_offset_deref_addv inline asm

by Stafford Horne

When working on OpenRISC support for restartable sequences I noticed and fixed these two issues with the riscv support bits. 1 The 'inc' argument to RSEQ_ASM_OP_R_DEREF_ADDV was being implicitly passed to the macro. Fix this by adding 'inc' to the list of macro arguments. 2 The inline asm input constraints for 'inc' and 'off' use "er", The riscv gcc port does not have an "e" constraint, this looks to be copied from the x86 port. Fix this by just using an "r" constraint. I have compile tested this only for riscv. However, the same fixes I use in the OpenRISC rseq selftests and everything passes with no issues. Fixes: 171586a6ab66 ("selftests/rseq: riscv: Template memory ordering and percpu access mode") Signed-off-by: Stafford Horne <shorne(a)gmail.com> Tested-by: Charlie Jenkins <charlie(a)rivosinc.com> Reviewed-by: Charlie Jenkins <charlie(a)rivosinc.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Acked-by: Shuah Khan <skhan(a)linuxfoundation.org> --- Since v1: - Added Fixes, Tested-by, Reviewed-by etc. tools/testing/selftests/rseq/rseq-riscv-bits.h | 6 +++--- tools/testing/selftests/rseq/rseq-riscv.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq-riscv-bits.h b/tools/testing/selftests/rseq/rseq-riscv-bits.h index de31a0143139..f02f411d550d 100644 --- a/tools/testing/selftests/rseq/rseq-riscv-bits.h +++ b/tools/testing/selftests/rseq/rseq-riscv-bits.h @@ -243,7 +243,7 @@ int RSEQ_TEMPLATE_IDENTIFIER(rseq_offset_deref_addv)(intptr_t *ptr, off_t off, i #ifdef RSEQ_COMPARE_TWICE RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, "%l[error1]") #endif - RSEQ_ASM_OP_R_DEREF_ADDV(ptr, off, 3) + RSEQ_ASM_OP_R_DEREF_ADDV(ptr, off, inc, 3) RSEQ_INJECT_ASM(4) RSEQ_ASM_DEFINE_ABORT(4, abort) : /* gcc asm goto does not allow outputs */ @@ -251,8 +251,8 @@ int RSEQ_TEMPLATE_IDENTIFIER(rseq_offset_deref_addv)(intptr_t *ptr, off_t off, i [current_cpu_id] "m" (rseq_get_abi()->RSEQ_TEMPLATE_CPU_ID_FIELD), [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [ptr] "r" (ptr), - [off] "er" (off), - [inc] "er" (inc) + [off] "r" (off), + [inc] "r" (inc) RSEQ_INJECT_INPUT : "memory", RSEQ_ASM_TMP_REG_1 RSEQ_INJECT_CLOBBER diff --git a/tools/testing/selftests/rseq/rseq-riscv.h b/tools/testing/selftests/rseq/rseq-riscv.h index 37e598d0a365..67d544aaa9a3 100644 --- a/tools/testing/selftests/rseq/rseq-riscv.h +++ b/tools/testing/selftests/rseq/rseq-riscv.h @@ -158,7 +158,7 @@ do { \ "bnez " RSEQ_ASM_TMP_REG_1 ", 222b\n" \ "333:\n" -#define RSEQ_ASM_OP_R_DEREF_ADDV(ptr, off, post_commit_label) \ +#define RSEQ_ASM_OP_R_DEREF_ADDV(ptr, off, inc, post_commit_label) \ "mv " RSEQ_ASM_TMP_REG_1 ", %[" __rseq_str(ptr) "]\n" \ RSEQ_ASM_OP_R_ADD(off) \ REG_L RSEQ_ASM_TMP_REG_1 ", 0(" RSEQ_ASM_TMP_REG_1 ")\n" \ -- 2.47.0

2 months, 2 weeks

2
1
0 0

[PATCH net-next v2] selftests: net: Add support for testing SO_RCVMARK and SO_RCVPRIORITY

by Anna Emese Nyiri

Introduce tests to verify the correct functionality of the SO_RCVMARK and SO_RCVPRIORITY socket options. Key changes include: - so_rcv_listener.c: Implements a receiver application to test the correct behavior of the SO_RCVMARK and SO_RCVPRIORITY options. - test_so_rcv.sh: Provides a shell script to automate testing for these options. - Makefile: Integrates test_so_rcv.sh into the kernel selftests. v2: - Add the C part to TEST_GEN_PROGS and .gitignore. - Modify buffer space and add IPv6 testing option in so_rcv_listener.c. - Add IPv6 testing, remove unnecessary comment, add kselftest exit codes, run both binaries in a namespace, and add sleep in test_so_rcv.sh. The sleep was added to ensure that the listener process has enough time to start before the sender attempts to connect. - Rebased on net-next. v1: https://lore.kernel.org/netdev/20250129143601.16035-2-annaemesenyiri@gmail.… Suggested-by: Jakub Kicinski <kuba(a)kernel.org> Suggested-by: Ferenc Fejes <fejes(a)inf.elte.hu> Signed-off-by: Anna Emese Nyiri <annaemesenyiri(a)gmail.com> --- tools/testing/selftests/net/.gitignore | 1 + tools/testing/selftests/net/Makefile | 2 + tools/testing/selftests/net/so_rcv_listener.c | 165 ++++++++++++++++++ tools/testing/selftests/net/test_so_rcv.sh | 73 ++++++++ 4 files changed, 241 insertions(+) create mode 100644 tools/testing/selftests/net/so_rcv_listener.c create mode 100755 tools/testing/selftests/net/test_so_rcv.sh diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index 28a715a8ef2b..80dcae53ef55 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -42,6 +42,7 @@ socket so_incoming_cpu so_netns_cookie so_txtime +so_rcv_listener stress_reuseport_listen tap tcp_fastopen_backup_key diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 73ee88d6b043..fe3491dea7c5 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -33,6 +33,7 @@ TEST_PROGS += gro.sh TEST_PROGS += gre_gso.sh TEST_PROGS += cmsg_so_mark.sh TEST_PROGS += cmsg_so_priority.sh +TEST_PROGS += test_so_rcv.sh TEST_PROGS += cmsg_time.sh cmsg_ipv6.sh TEST_PROGS += netns-name.sh TEST_PROGS += nl_netdev.py @@ -89,6 +90,7 @@ TEST_GEN_FILES += sctp_hello TEST_GEN_FILES += ip_local_port_range TEST_GEN_PROGS += bind_wildcard TEST_GEN_PROGS += bind_timewait +TEST_GEN_PROGS += so_rcv_listener TEST_PROGS += test_vxlan_mdb.sh TEST_PROGS += test_bridge_neigh_suppress.sh TEST_PROGS += test_vxlan_nolocalbypass.sh diff --git a/tools/testing/selftests/net/so_rcv_listener.c b/tools/testing/selftests/net/so_rcv_listener.c new file mode 100644 index 000000000000..693fc1e3d44d --- /dev/null +++ b/tools/testing/selftests/net/so_rcv_listener.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <errno.h> +#include <netdb.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <linux/types.h> +#include <sys/socket.h> +#include <netinet/in.h> +#include <arpa/inet.h> + +#ifndef SO_RCVPRIORITY +#define SO_RCVPRIORITY 82 +#endif + +struct options { + __u32 val; + int name; + int rcvname; + const char *host; + const char *service; +} opt; + +static void __attribute__((noreturn)) usage(const char *bin) +{ + printf("Usage: %s [opts] <dst host> <dst port / service>\n", bin); + printf("Options:\n" + "\t\t-M val Test SO_RCVMARK\n" + "\t\t-P val Test SO_RCVPRIORITY\n" + ""); + exit(EXIT_FAILURE); +} + +static void parse_args(int argc, char *argv[]) +{ + int o; + + while ((o = getopt(argc, argv, "M:P:")) != -1) { + switch (o) { + case 'M': + opt.val = atoi(optarg); + opt.name = SO_MARK; + opt.rcvname = SO_RCVMARK; + break; + case 'P': + opt.val = atoi(optarg); + opt.name = SO_PRIORITY; + opt.rcvname = SO_RCVPRIORITY; + break; + default: + usage(argv[0]); + break; + } + } + + if (optind != argc - 2) + usage(argv[0]); + + opt.host = argv[optind]; + opt.service = argv[optind + 1]; +} + +int main(int argc, char *argv[]) +{ + int err = 0; + int recv_fd = -1; + int ret_value = 0; + __u32 recv_val; + struct cmsghdr *cmsg; + char cbuf[CMSG_SPACE(sizeof(__u32))]; + char recv_buf[CMSG_SPACE(sizeof(__u32))]; + struct iovec iov[1]; + struct msghdr msg; + struct sockaddr_in recv_addr4; + struct sockaddr_in6 recv_addr6; + + parse_args(argc, argv); + + int family = strchr(opt.host, ':') ? AF_INET6 : AF_INET; + + recv_fd = socket(family, SOCK_DGRAM, IPPROTO_UDP); + if (recv_fd < 0) { + perror("Can't open recv socket"); + ret_value = -errno; + goto cleanup; + } + + err = setsockopt(recv_fd, SOL_SOCKET, opt.rcvname, &opt.val, sizeof(opt.val)); + if (err < 0) { + perror("Recv setsockopt error"); + ret_value = -errno; + goto cleanup; + } + + if (family == AF_INET) { + memset(&recv_addr4, 0, sizeof(recv_addr4)); + recv_addr4.sin_family = family; + recv_addr4.sin_port = htons(atoi(opt.service)); + + if (inet_pton(family, opt.host, &recv_addr4.sin_addr) <= 0) { + perror("Invalid IPV4 address"); + ret_value = -errno; + goto cleanup; + } + + err = bind(recv_fd, (struct sockaddr *)&recv_addr4, sizeof(recv_addr4)); + } else { + memset(&recv_addr6, 0, sizeof(recv_addr6)); + recv_addr6.sin6_family = family; + recv_addr6.sin6_port = htons(atoi(opt.service)); + + if (inet_pton(family, opt.host, &recv_addr6.sin6_addr) <= 0) { + perror("Invalid IPV6 address"); + ret_value = -errno; + goto cleanup; + } + + err = bind(recv_fd, (struct sockaddr *)&recv_addr6, sizeof(recv_addr6)); + } + + if (err < 0) { + perror("Recv bind error"); + ret_value = -errno; + goto cleanup; + } + + iov[0].iov_base = recv_buf; + iov[0].iov_len = sizeof(recv_buf); + + memset(&msg, 0, sizeof(msg)); + msg.msg_iov = iov; + msg.msg_iovlen = 1; + msg.msg_control = cbuf; + msg.msg_controllen = sizeof(cbuf); + + err = recvmsg(recv_fd, &msg, 0); + if (err < 0) { + perror("Message receive error"); + ret_value = -errno; + goto cleanup; + } + + for (cmsg = CMSG_FIRSTHDR(&msg); cmsg != NULL; cmsg = CMSG_NXTHDR(&msg, cmsg)) { + if (cmsg->cmsg_level == SOL_SOCKET && cmsg->cmsg_type == opt.name) { + recv_val = *(__u32 *)CMSG_DATA(cmsg); + printf("Received value: %u\n", recv_val); + + if (recv_val != opt.val) { + fprintf(stderr, "Error: expected value: %u, got: %u\n", + opt.val, recv_val); + ret_value = -EINVAL; + goto cleanup; + } + } + } + +cleanup: + if (recv_fd >= 0) + close(recv_fd); + + return ret_value; +} diff --git a/tools/testing/selftests/net/test_so_rcv.sh b/tools/testing/selftests/net/test_so_rcv.sh new file mode 100755 index 000000000000..d8aa4362879d --- /dev/null +++ b/tools/testing/selftests/net/test_so_rcv.sh @@ -0,0 +1,73 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source lib.sh + +HOSTS=("127.0.0.1" "::1") +PORT=1234 +TOTAL_TESTS=0 +FAILED_TESTS=0 + +declare -A TESTS=( + ["SO_RCVPRIORITY"]="-P 2" + ["SO_RCVMARK"]="-M 3" +) + +check_result() { + ((TOTAL_TESTS++)) + if [ "$1" -ne 0 ]; then + ((FAILED_TESTS++)) + fi +} + +cleanup() +{ + cleanup_ns $NS +} + +trap cleanup EXIT + +setup_ns NS + +for HOST in "${HOSTS[@]}"; do + PROTOCOL="IPv4" + if [[ "$HOST" == "::1" ]]; then + PROTOCOL="IPv6" + fi + for test_name in "${!TESTS[@]}"; do + echo "Running $test_name test, $PROTOCOL" + arg=${TESTS[$test_name]} + + ip netns exec $NS ./so_rcv_listener $arg $HOST $PORT & + LISTENER_PID=$! + + sleep 0.5 + + if ! ip netns exec $NS ./cmsg_sender $arg $HOST $PORT; then + echo "Sender failed for $test_name, $PROTOCOL" + kill "$LISTENER_PID" 2>/dev/null + wait "$LISTENER_PID" + check_result 1 + continue + fi + + wait "$LISTENER_PID" + LISTENER_EXIT_CODE=$? + + if [ "$LISTENER_EXIT_CODE" -eq 0 ]; then + echo "Rcv test OK for $test_name, $PROTOCOL" + check_result 0 + else + echo "Rcv test FAILED for $test_name, $PROTOCOL" + check_result 1 + fi + done +done + +if [ "$FAILED_TESTS" -ne 0 ]; then + echo "FAIL - $FAILED_TESTS/$TOTAL_TESTS tests failed" + exit ${KSFT_FAIL} +else + echo "OK - All $TOTAL_TESTS tests passed" + exit ${KSFT_PASS} +fi -- 2.43.0

2 months, 2 weeks

4
4
0 0

[PATCH v2 0/6] cleanups, fixes, and progress towards avoiding "make headers"

by John Hubbard

Jeff Xu, I apologize for this churn: I was forced to drop your Reviewed-by and Tested-by tags from 2 of the 3 mseal patches, because the __NR_mseal fix is completely different now. Changes since v1: a) Reworked the mseal fix to use the kernel's in-tree unistd*.h files, instead of hacking in a __NR_mseal definition directly. (Thanks to David Hildenbrand for pointing out that this needed to be done.) b) Fixed the subject line of the kvm and mdwe patch. c) Reordered the patches so as to group the mseal changes together. d) ADDED an additional patch, 6/6, to remove various __NR_xx items and checks from the mm selftests. Cover letter, updated for v2: Eventually, once the build succeeds on a sufficiently old distro, the idea is to delete $(KHDR_INCLUDES) from the selftests/mm build, and then after that, from selftests/lib.mk and all of the other selftest builds. For now, this series merely achieves a clean build of selftests/mm on a not-so-old distro: Ubuntu 23.04. In other words, after this series is applied, it is possible to delete $(KHDR_INCLUDES) from selftests/mm/Makefile and the build will still succeed. 1. Add tools/uapi/asm/unistd_[32|x32|64].h files, which include definitions of __NR_mseal, and include them (indirectly) from the files that use __NR_mseal. The new files are copied from ./usr/include/asm, which is how we have agreed to do this sort of thing, see [1]. 2. Add fs.h, similarly created: it was copied directly from a snapshot of ./usr/include/linux/fs.h after running "make headers". 3. Add a few selected prctl.h values that the ksm and mdwe tests require. 4. Factor out some common code from mseal_test.c and seal_elf.c, into a new mseal_helpers.h file. 5. Remove local __NR_* definitions and checks. [1] commit e076eaca5906 ("selftests: break the dependency upon local header files") John Hubbard (6): selftests/mm: mseal, self_elf: fix missing __NR_mseal selftests/mm: mseal, self_elf: factor out test macros and other duplicated items selftests/mm: mseal, self_elf: rename TEST_END_CHECK to REPORT_TEST_PASS selftests/mm: fix vm_util.c build failures: add snapshot of fs.h selftests/mm: kvm, mdwe fixes to avoid requiring "make headers" selftests/mm: remove local __NR_* definitions tools/include/uapi/asm/unistd_32.h | 458 ++++++++++++++++++ tools/include/uapi/asm/unistd_64.h | 380 +++++++++++++++ tools/include/uapi/asm/unistd_x32.h | 369 ++++++++++++++ tools/include/uapi/linux/fs.h | 392 +++++++++++++++ tools/testing/selftests/mm/hugepage-mremap.c | 2 +- .../selftests/mm/ksm_functional_tests.c | 8 +- tools/testing/selftests/mm/mdwe_test.c | 1 + tools/testing/selftests/mm/memfd_secret.c | 14 +- tools/testing/selftests/mm/mkdirty.c | 8 +- tools/testing/selftests/mm/mlock2.h | 1 + tools/testing/selftests/mm/mrelease_test.c | 2 +- tools/testing/selftests/mm/mseal_helpers.h | 41 ++ tools/testing/selftests/mm/mseal_test.c | 143 ++---- tools/testing/selftests/mm/pagemap_ioctl.c | 2 +- tools/testing/selftests/mm/protection_keys.c | 2 +- tools/testing/selftests/mm/seal_elf.c | 37 +- tools/testing/selftests/mm/uffd-common.c | 4 - tools/testing/selftests/mm/uffd-stress.c | 16 +- tools/testing/selftests/mm/uffd-unit-tests.c | 14 +- tools/testing/selftests/mm/vm_util.h | 15 + 20 files changed, 1717 insertions(+), 192 deletions(-) create mode 100644 tools/include/uapi/asm/unistd_32.h create mode 100644 tools/include/uapi/asm/unistd_64.h create mode 100644 tools/include/uapi/asm/unistd_x32.h create mode 100644 tools/include/uapi/linux/fs.h create mode 100644 tools/testing/selftests/mm/mseal_helpers.h base-commit: 2ccbdf43d5e758f8493a95252073cf9078a5fea5 -- 2.45.2

2 months, 2 weeks

4
22
0 0

[PATCH] selftests/vDSO: fix GNU hash table entry size for s390x

by Thomas Weißschuh

Commit 14be4e6f3522 ("selftests: vDSO: fix ELF hash table entry size for s390x") changed the type of the ELF hash table entries to 64bit on s390x. However the *GNU* hash tables entries are always 32bit. The "bucket" pointer is shared between both hash algorithms. On s390x the GNU algorithm assigns and dereferences this 64bit pointer as a 32bit pointer, leading to compiler warnings and runtime crashes. Introduce a new dedicated "gnu_bucket" pointer which is used by the GNU hash. Fixes: e0746bde6f82 ("selftests/vDSO: support DT_GNU_HASH") Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- tools/testing/selftests/vDSO/parse_vdso.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/vDSO/parse_vdso.c b/tools/testing/selftests/vDSO/parse_vdso.c index 2fe5e983cb22f1ed066d0310a54f6aef2ed77ed8..f89d052c730eb43eea28d69ca27b56e897503e16 100644 --- a/tools/testing/selftests/vDSO/parse_vdso.c +++ b/tools/testing/selftests/vDSO/parse_vdso.c @@ -53,7 +53,7 @@ static struct vdso_info /* Symbol table */ ELF(Sym) *symtab; const char *symstrings; - ELF(Word) *gnu_hash; + ELF(Word) *gnu_hash, *gnu_bucket; ELF_HASH_ENTRY *bucket, *chain; ELF_HASH_ENTRY nbucket, nchain; @@ -185,8 +185,8 @@ void vdso_init_from_sysinfo_ehdr(uintptr_t base) /* The bucket array is located after the header (4 uint32) and the bloom * filter (size_t array of gnu_hash[2] elements). */ - vdso_info.bucket = vdso_info.gnu_hash + 4 + - sizeof(size_t) / 4 * vdso_info.gnu_hash[2]; + vdso_info.gnu_bucket = vdso_info.gnu_hash + 4 + + sizeof(size_t) / 4 * vdso_info.gnu_hash[2]; } else { vdso_info.nbucket = hash[0]; vdso_info.nchain = hash[1]; @@ -268,11 +268,11 @@ void *vdso_sym(const char *version, const char *name) if (vdso_info.gnu_hash) { uint32_t h1 = gnu_hash(name), h2, *hashval; - i = vdso_info.bucket[h1 % vdso_info.nbucket]; + i = vdso_info.gnu_bucket[h1 % vdso_info.nbucket]; if (i == 0) return 0; h1 |= 1; - hashval = vdso_info.bucket + vdso_info.nbucket + + hashval = vdso_info.gnu_bucket + vdso_info.nbucket + (i - vdso_info.gnu_hash[1]); for (;; i++) { ELF(Sym) *sym = &vdso_info.symtab[i]; --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250213-selftests-vdso-s390-gnu-hash-7206671abc85 Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

2 months, 2 weeks

2
2
0 0

[PATCH v2 0/2] unicode: kunit: refactor selftest to kunit tests

by Pedro Orlando

Hey all, We are making these changes as part of a KUnit Hackathon at LKCamp [1]. This patch sets out to refactor fs/unicode/utf8-selftest.c to KUnit tests. The main benefit of this change is that we can leverage KUnit's test suite for quickly compiling and testing the functions in utf8, instead of compiling the kernel and loading the previous utf8-selftest module, as well as adopting a pattern across all kernel tests. The first commit is the refactoring itself from self test into KUnit, which kept the original test logic intact -- maintaining the purpose of the original tests -- with the added benefit of including these tests into the KUnit test suite. The second commit applies the naming style and file path conventions defined on Documentation/dev-tools/kunit/style.rst We appreciate any feedback and suggestions. :) [1] https://lkcamp.dev/about/ Co-developed-by: Pedro Orlando <porlando(a)lkcamp.dev> Signed-off-by: Pedro Orlando <porlando(a)lkcamp.dev> Co-developed-by: Danilo Pereira <dpereira(a)lkcamp.dev> Signed-off-by: Danilo Pereira <dpereira(a)lkcamp.dev> Signed-off-by: Gabriela Bittencourt <gbittencourt(a)lkcamp.dev> Gabriela Bittencourt (2): unicode: kunit: refactor selftest to kunit tests unicode: kunit: change tests filename and path fs/unicode/Kconfig | 5 +- fs/unicode/Makefile | 2 +- fs/unicode/tests/.kunitconfig | 3 + .../{utf8-selftest.c => tests/utf8_kunit.c} | 149 ++++++++---------- 4 files changed, 76 insertions(+), 83 deletions(-) create mode 100644 fs/unicode/tests/.kunitconfig rename fs/unicode/{utf8-selftest.c => tests/utf8_kunit.c} (64%) -- 2.34.1

2 months, 2 weeks

6
11
0 0

[PATCH v2 0/6] KUnit test moves / renames

by Kees Cook

Hi, This is rebased to v6.14-rc2. I'll carry it and folks can send me new tests, etc, as needed to minimize future collisions. v1: https://lore.kernel.org/lkml/20241011072509.3068328-2-davidgow@google.com/ Thanks! -Kees Bruno Sobreira França (1): lib/math: Add int_log test suite Diego Vieira (1): lib/tests/kfifo_kunit.c: add tests for the kfifo structure Gabriela Bittencourt (2): unicode: kunit: refactor selftest to kunit tests unicode: kunit: change tests filename and path Kees Cook (1): lib: Move KUnit tests into tests/ subdirectory Luis Felipe Hernandez (1): lib: math: Move KUnit tests into tests/ subdir MAINTAINERS | 19 +- fs/unicode/Kconfig | 5 +- fs/unicode/Makefile | 2 +- fs/unicode/tests/.kunitconfig | 3 + .../{utf8-selftest.c => tests/utf8_kunit.c} | 149 ++++++------ fs/unicode/utf8-norm.c | 2 +- lib/Kconfig.debug | 27 ++- lib/Makefile | 39 +-- lib/math/Makefile | 5 +- lib/math/tests/Makefile | 4 +- lib/math/tests/int_log_kunit.c | 74 ++++++ .../rational_kunit.c} | 0 lib/tests/Makefile | 41 ++++ lib/{ => tests}/bitfield_kunit.c | 0 lib/{ => tests}/checksum_kunit.c | 0 lib/{ => tests}/cmdline_kunit.c | 0 lib/{ => tests}/cpumask_kunit.c | 0 lib/{ => tests}/crc_kunit.c | 0 lib/{ => tests}/fortify_kunit.c | 0 lib/{ => tests}/hashtable_test.c | 0 lib/{ => tests}/is_signed_type_kunit.c | 0 lib/tests/kfifo_kunit.c | 224 ++++++++++++++++++ lib/{ => tests}/kunit_iov_iter.c | 0 lib/{ => tests}/list-test.c | 0 lib/{ => tests}/memcpy_kunit.c | 0 lib/{ => tests}/overflow_kunit.c | 0 lib/{ => tests}/siphash_kunit.c | 0 lib/{ => tests}/slub_kunit.c | 0 lib/{ => tests}/stackinit_kunit.c | 0 lib/{ => tests}/string_helpers_kunit.c | 0 lib/{ => tests}/string_kunit.c | 0 lib/{ => tests}/test_bits.c | 0 lib/{ => tests}/test_fprobe.c | 0 lib/{ => tests}/test_hash.c | 0 lib/{ => tests}/test_kprobes.c | 0 lib/{ => tests}/test_linear_ranges.c | 0 lib/{ => tests}/test_list_sort.c | 0 lib/{ => tests}/test_sort.c | 0 lib/{ => tests}/usercopy_kunit.c | 0 lib/{ => tests}/util_macros_kunit.c | 0 40 files changed, 458 insertions(+), 136 deletions(-) create mode 100644 fs/unicode/tests/.kunitconfig rename fs/unicode/{utf8-selftest.c => tests/utf8_kunit.c} (64%) create mode 100644 lib/math/tests/int_log_kunit.c rename lib/math/{rational-test.c => tests/rational_kunit.c} (100%) rename lib/{ => tests}/bitfield_kunit.c (100%) rename lib/{ => tests}/checksum_kunit.c (100%) rename lib/{ => tests}/cmdline_kunit.c (100%) rename lib/{ => tests}/cpumask_kunit.c (100%) rename lib/{ => tests}/crc_kunit.c (100%) rename lib/{ => tests}/fortify_kunit.c (100%) rename lib/{ => tests}/hashtable_test.c (100%) rename lib/{ => tests}/is_signed_type_kunit.c (100%) create mode 100644 lib/tests/kfifo_kunit.c rename lib/{ => tests}/kunit_iov_iter.c (100%) rename lib/{ => tests}/list-test.c (100%) rename lib/{ => tests}/memcpy_kunit.c (100%) rename lib/{ => tests}/overflow_kunit.c (100%) rename lib/{ => tests}/siphash_kunit.c (100%) rename lib/{ => tests}/slub_kunit.c (100%) rename lib/{ => tests}/stackinit_kunit.c (100%) rename lib/{ => tests}/string_helpers_kunit.c (100%) rename lib/{ => tests}/string_kunit.c (100%) rename lib/{ => tests}/test_bits.c (100%) rename lib/{ => tests}/test_fprobe.c (100%) rename lib/{ => tests}/test_hash.c (100%) rename lib/{ => tests}/test_kprobes.c (100%) rename lib/{ => tests}/test_linear_ranges.c (100%) rename lib/{ => tests}/test_list_sort.c (100%) rename lib/{ => tests}/test_sort.c (100%) rename lib/{ => tests}/usercopy_kunit.c (100%) rename lib/{ => tests}/util_macros_kunit.c (100%) -- 2.34.1

2 months, 2 weeks

4
11
0 0

[PATCH] selftests/nolibc: split up architecture list in run-tests.sh

by Thomas Weißschuh

The list is getting overly long and any modifications introduce a lot of noise and are prone to conflicts. Split the string into a bash array and break that into multiple lines. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- tools/testing/selftests/nolibc/run-tests.sh | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/nolibc/run-tests.sh b/tools/testing/selftests/nolibc/run-tests.sh index bc4e92b4f1b98278a0a72345a5cd67f1a429b6a2..6db01115276888bc89f6ec5532153c37e55c83d3 100755 --- a/tools/testing/selftests/nolibc/run-tests.sh +++ b/tools/testing/selftests/nolibc/run-tests.sh @@ -17,7 +17,16 @@ perform_download=0 test_mode=system werror=1 llvm= -archs="i386 x86_64 arm64 arm mips32le mips32be ppc ppc64 ppc64le riscv32 riscv64 s390 loongarch" +all_archs=( + i386 x86_64 + arm64 arm + mips32le mips32be + ppc ppc64 ppc64le + riscv32 riscv64 + s390 + loongarch +) +archs="${all_archs[@]}" TEMP=$(getopt -o 'j:d:c:b:a:m:pelh' -n "$0" -- "$@") --- base-commit: 665fa8dea90d9fbc0e7137c7e1315d6f7e15757e change-id: 20250211-nolibc-test-archs-a5990cfc9e52 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

2 months, 2 weeks

1
1
0 0

selftest/vDSO: vdso_test_abi tests with gcc-13 and pass with clang-19

by Naresh Kamboju

The kselftest-vDSO/vdso_test_abi test encounters failures when built and executed using GCC-13 on armv7 architecture. The issue has been observed on both TI X15 devices and QEMU-armv7. Interestingly, the same test passes without any issues when built using Clang-19.This failure is specific to GCC-13. but test case should have been failed on clang toolchain but it did not. The Clang toolchain likely defaults to the traditional 32-bit time_t on 32-bit Debian Trixie (except x86), leading to an ABI issue similar to older compilers. This is affecting compatibility. This is not a new regression, this report generated on Linux next but also seen on Linux stable tree. Test name: kselftest-vDSO/vdso_test_abi Fails: gcc-13 pass: clang-19 Arnd Bergmann investigated and proposed a patch which fixes the problem. Test regression: selftest-vDSO/vdso_test_abi: Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> # selftests: vDSO: vdso_test_abi # TAP version 13 # 1..16 # # [vDSO kselftest] VDSO_VERSION: LINUX_2.6 # # The time is 184285885525887.-5268386858514840748 # ok 1 __vdso_gettimeofday # # clock_id: CLOCK_REALTIME # # The time is 184287230099877759.-1225334784 # ok 2 __vdso_clock_gettime CLOCK_REALTIME # # The vdso resolution is 4294967296 -1225335584 # # The syscall resolution is 4294967296 -1225334784 # not ok 3 __vdso_clock_getres CLOCK_REALTIME # # clock_id: CLOCK_BOOTTIME # # The time is 3253049749439251215.-1225334784 # ok 4 __vdso_clock_gettime CLOCK_BOOTTIME # # The vdso resolution is 4294967296 -1225335584 # # The syscall resolution is 4294967296 -1225334784 # not ok 5 __vdso_clock_getres CLOCK_BOOTTIME # # clock_id: CLOCK_TAI # # The time is 184549377723756415.-1225334784 # ok 6 __vdso_clock_gettime CLOCK_TAI # # The vdso resolution is 4294967296 -1225335584 # # The syscall resolution is 4294967296 -1225334784 # not ok 7 __vdso_clock_getres CLOCK_TAI # # clock_id: CLOCK_REALTIME_COARSE # # The time is 128974845965660031.-1225334784 # ok 8 __vdso_clock_gettime CLOCK_REALTIME_COARSE # # The vdso resolution is 42949672960000000 -1225335584 # # The syscall resolution is 42949672960000000 -1225334784 # not ok 9 __vdso_clock_getres CLOCK_REALTIME_COARSE # # clock_id: CLOCK_MONOTONIC # # The time is 3253311892768162575.-1225334784 # ok 10 __vdso_clock_gettime CLOCK_MONOTONIC # # The vdso resolution is 4294967296 -1225335584 # # The syscall resolution is 4294967296 -1225334784 # not ok 11 __vdso_clock_getres CLOCK_MONOTONIC # # clock_id: CLOCK_MONOTONIC_RAW # # The time is 3253442966580101903.-1225334784 # ok 12 __vdso_clock_gettime CLOCK_MONOTONIC_RAW # # The vdso resolution is 4294967296 -1225335584 # # The syscall resolution is 4294967296 -1225334784 # not ok 13 __vdso_clock_getres CLOCK_MONOTONIC_RAW # # clock_id: CLOCK_MONOTONIC_COARSE # # The time is 3197606291493094159.-1225334784 # ok 14 __vdso_clock_gettime CLOCK_MONOTONIC_COARSE # # The vdso resolution is 42949672960000000 -1225335584 # # The syscall resolution is 42949672960000000 -1225334784 # not ok 15 __vdso_clock_getres CLOCK_MONOTONIC_COARSE # # Couldn't find __vdso_time # ok 16 # SKIP __vdso_time # # 1 skipped test(s) detected. Consider enabling relevant config options to improve coverage. # # Totals: pass:8 fail:7 xfail:0 xpass:0 skip:1 error:0 not ok 3 selftests: vDSO: vdso_test_abi # exit=1 ## Build * test log: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20241126/te… * TI x15 test log: https://lkft.validation.linaro.org/scheduler/job/8117196#L7091 * build link: https://storage.tuxsuite.com/public/linaro/lkft/builds/2spp0E2mMNQq16RHsbzL… ## Source * git tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git * git sha: df5d6180169ae06a2eac57e33b077ad6f6252440 (this not new issue) * architectures: armv7 * toolchain: gcc-13 (13.3.0) - failed * toolchain: clang ( version: 19.1.7) - pass * devices: Armv7 TI beaglebone, qemu-armv7 -- Linaro LKFT https://lkft.linaro.org

2 months, 2 weeks

2
1
0 0

[PATCH] ww_mutex: convert self-test to KUnit

by Tamir Duberstein

Convert this unit test to a KUnit test. Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 ww_mutex On success: ; [12:48:16] ================== ww_mutex (5 subtests) =================== ; [12:48:16] ======================= test_mutex ======================== ; [12:48:16] [PASSED] flags=0 ; [12:48:16] [PASSED] flags=1 ; [12:48:16] [PASSED] flags=2 ; [12:48:16] [PASSED] flags=3 ; [12:48:16] [PASSED] flags=4 ; [12:48:17] [PASSED] flags=5 ; [12:48:17] [PASSED] flags=6 ; [12:48:17] [PASSED] flags=7 ; [12:48:17] =================== [PASSED] test_mutex ==================== ; [12:48:17] ========================= test_aa ========================= ; [12:48:17] [PASSED] lock ; [12:48:17] [PASSED] trylock ; [12:48:17] ===================== [PASSED] test_aa ===================== ; [12:48:17] ======================== test_abba ======================== ; [12:48:17] [PASSED] trylock=0,resolve=0 ; [12:48:17] [PASSED] trylock=1,resolve=1 ; [12:48:17] [PASSED] trylock=0,resolve=0 ; [12:48:17] [PASSED] trylock=1,resolve=1 ; [12:48:17] ==================== [PASSED] test_abba ==================== ; [12:48:17] ======================= test_cycle ======================== ; [12:48:17] [PASSED] nthreads=2 ; [12:48:17] =================== [PASSED] test_cycle ==================== ; [12:48:21] ========================= stress ========================== ; [12:48:21] [PASSED] nlocks=16,nthreads_per_cpu=2,flags=1 ; [12:48:23] [PASSED] nlocks=16,nthreads_per_cpu=2,flags=2 ; [12:48:23] [PASSED] nlocks=2046,nthreads_per_cpu=3,flags=7 ; [12:48:23] ===================== [PASSED] stress ====================== ; [12:48:23] ==================== [PASSED] ww_mutex ===================== ; [12:48:23] ============================================================ ; [12:48:23] Testing complete. Ran 18 tests: passed: 18 On failure: --- kernel/locking/Makefile | 3 +- .../locking/{test-ww_mutex.c => ww_mutex_kunit.c} | 311 ++++++++++----------- lib/Kconfig.debug | 12 +- tools/testing/selftests/locking/ww_mutex.sh | 19 -- 4 files changed, 163 insertions(+), 182 deletions(-) diff --git a/kernel/locking/Makefile b/kernel/locking/Makefile index 0db4093d17b8..26af3e88fffa 100644 --- a/kernel/locking/Makefile +++ b/kernel/locking/Makefile @@ -30,5 +30,6 @@ obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock.o obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock_debug.o obj-$(CONFIG_QUEUED_RWLOCKS) += qrwlock.o obj-$(CONFIG_LOCK_TORTURE_TEST) += locktorture.o -obj-$(CONFIG_WW_MUTEX_SELFTEST) += test-ww_mutex.o obj-$(CONFIG_LOCK_EVENT_COUNTS) += lock_events.o + +obj-$(CONFIG_WW_MUTEX_KUNIT_TEST) += ww_mutex_kunit.o diff --git a/kernel/locking/test-ww_mutex.c b/kernel/locking/ww_mutex_kunit.c similarity index 67% rename from kernel/locking/test-ww_mutex.c rename to kernel/locking/ww_mutex_kunit.c index bcb1b9fea588..ba89a4a702f9 100644 --- a/kernel/locking/test-ww_mutex.c +++ b/kernel/locking/ww_mutex_kunit.c @@ -3,10 +3,10 @@ * Module-based API test facility for ww_mutexes */ -#include <linux/kernel.h> - +#include <kunit/test.h> #include <linux/completion.h> #include <linux/delay.h> +#include <linux/kernel.h> #include <linux/kthread.h> #include <linux/module.h> #include <linux/prandom.h> @@ -54,12 +54,39 @@ static void test_mutex_work(struct work_struct *work) ww_mutex_unlock(&mtx->mutex); } -static int __test_mutex(unsigned int flags) +static const unsigned int *gen_range( + unsigned int *storage, + const unsigned int min, + const unsigned int max, + const int *prev) +{ + if (prev != NULL) { + if (*prev >= max) + return NULL; + *storage = *prev + 1; + } else { + *storage = min; + } + return storage; +} + +static const void *test_mutex_gen_params(const void *prev, char *desc) +{ + static unsigned int storage; + const unsigned int *next = gen_range(&storage, 0, __TEST_MTX_LAST - 1, prev); + + if (next != NULL) + snprintf(desc, KUNIT_PARAM_DESC_SIZE, "flags=%x", *next); + return next; +} + +static void test_mutex(struct kunit *test) { #define TIMEOUT (HZ / 16) + const unsigned int *param = test->param_value; + const unsigned int flags = *param; struct test_mutex mtx; struct ww_acquire_ctx ctx; - int ret; ww_mutex_init(&mtx.mutex, &ww_class); if (flags & TEST_MTX_CTX) @@ -79,53 +106,42 @@ static int __test_mutex(unsigned int flags) if (flags & TEST_MTX_SPIN) { unsigned long timeout = jiffies + TIMEOUT; - ret = 0; do { if (completion_done(&mtx.done)) { - ret = -EINVAL; + KUNIT_FAIL(test, "mutual exclusion failure"); break; } cond_resched(); } while (time_before(jiffies, timeout)); } else { - ret = wait_for_completion_timeout(&mtx.done, TIMEOUT); + KUNIT_EXPECT_EQ(test, wait_for_completion_timeout(&mtx.done, TIMEOUT), 0); } ww_mutex_unlock(&mtx.mutex); if (flags & TEST_MTX_CTX) ww_acquire_fini(&ctx); - if (ret) { - pr_err("%s(flags=%x): mutual exclusion failure\n", - __func__, flags); - ret = -EINVAL; - } - flush_work(&mtx.work); destroy_work_on_stack(&mtx.work); - return ret; #undef TIMEOUT } -static int test_mutex(void) +static const void *test_aa_gen_params(const void *prev, char *desc) { - int ret; - int i; + static unsigned int storage; + const unsigned int *next = gen_range(&storage, 0, 1, prev); - for (i = 0; i < __TEST_MTX_LAST; i++) { - ret = __test_mutex(i); - if (ret) - return ret; - } - - return 0; + if (next != NULL) + snprintf(desc, KUNIT_PARAM_DESC_SIZE, *next ? "trylock" : "lock"); + return next; } -static int test_aa(bool trylock) +static void test_aa(struct kunit *test) { + const unsigned int *param = test->param_value; + const bool trylock = *param; struct ww_mutex mutex; struct ww_acquire_ctx ctx; int ret; - const char *from = trylock ? "trylock" : "lock"; ww_mutex_init(&mutex, &ww_class); ww_acquire_init(&ctx, &ww_class); @@ -133,46 +149,42 @@ static int test_aa(bool trylock) if (!trylock) { ret = ww_mutex_lock(&mutex, &ctx); if (ret) { - pr_err("%s: initial lock failed!\n", __func__); + KUNIT_FAIL(test, "initial lock failed, ret=%d", ret); goto out; } } else { ret = !ww_mutex_trylock(&mutex, &ctx); if (ret) { - pr_err("%s: initial trylock failed!\n", __func__); + KUNIT_FAIL(test, "initial trylock failed, ret=%d", ret); goto out; } } - if (ww_mutex_trylock(&mutex, NULL)) { - pr_err("%s: trylocked itself without context from %s!\n", __func__, from); + ret = ww_mutex_trylock(&mutex, NULL); + if (ret) { + KUNIT_FAIL(test, "trylocked itself without context, ret=%d", ret); ww_mutex_unlock(&mutex); - ret = -EINVAL; goto out; } - if (ww_mutex_trylock(&mutex, &ctx)) { - pr_err("%s: trylocked itself with context from %s!\n", __func__, from); + ret = ww_mutex_trylock(&mutex, &ctx); + if (ret) { + KUNIT_FAIL(test, "trylocked itself with context, ret=%d", ret); ww_mutex_unlock(&mutex); - ret = -EINVAL; goto out; } ret = ww_mutex_lock(&mutex, &ctx); if (ret != -EALREADY) { - pr_err("%s: missed deadlock for recursing, ret=%d from %s\n", - __func__, ret, from); + KUNIT_FAIL(test, "missed deadlock for recursing, ret=%d", ret); if (!ret) ww_mutex_unlock(&mutex); - ret = -EINVAL; goto out; } ww_mutex_unlock(&mutex); - ret = 0; out: ww_acquire_fini(&ctx); - return ret; } struct test_abba { @@ -217,11 +229,28 @@ static void test_abba_work(struct work_struct *work) abba->result = err; } -static int test_abba(bool trylock, bool resolve) +static const void *test_abba_gen_params(const void *prev, char *desc) { + static unsigned int storage; + const unsigned int *next = gen_range(&storage, 0b00, 0b11, prev); + + if (next != NULL) { + const bool trylock = *next & 0b01 >> 0; + const bool resolve = *next & 0b10 >> 1; + + snprintf(desc, KUNIT_PARAM_DESC_SIZE, "trylock=%d,resolve=%d", trylock, resolve); + } + return next; +} + +static void test_abba(struct kunit *test) +{ + const unsigned int *param = test->param_value; + const bool trylock = *param & 0b01 >> 0; + const bool resolve = *param & 0b10 >> 1; struct test_abba abba; struct ww_acquire_ctx ctx; - int err, ret; + int err; ww_mutex_init(&abba.a_mutex, &ww_class); ww_mutex_init(&abba.b_mutex, &ww_class); @@ -259,21 +288,17 @@ static int test_abba(bool trylock, bool resolve) flush_work(&abba.work); destroy_work_on_stack(&abba.work); - ret = 0; if (resolve) { if (err || abba.result) { - pr_err("%s: failed to resolve ABBA deadlock, A err=%d, B err=%d\n", - __func__, err, abba.result); - ret = -EINVAL; + KUNIT_FAIL(test, "failed to resolve ABBA deadlock, A err=%d, B err=%d", + err, abba.result); } } else { if (err != -EDEADLK && abba.result != -EDEADLK) { - pr_err("%s: missed ABBA deadlock, A err=%d, B err=%d\n", - __func__, err, abba.result); - ret = -EINVAL; + KUNIT_FAIL(test, "missed ABBA deadlock, A err=%d, B err=%d", + err, abba.result); } } - return ret; } struct test_cycle { @@ -314,15 +339,25 @@ static void test_cycle_work(struct work_struct *work) cycle->result = err ?: erra; } -static int __test_cycle(unsigned int nthreads) +static const void *test_cycle_gen_params(const void *prev, char *desc) { + static unsigned int storage; + const unsigned int *next = gen_range(&storage, 2, num_online_cpus(), prev); + + if (next != NULL) + snprintf(desc, KUNIT_PARAM_DESC_SIZE, "nthreads=%d", *next); + return next; +} + +static void test_cycle(struct kunit *test) +{ + const unsigned int *param = test->param_value; + const unsigned int nthreads = *param; struct test_cycle *cycles; unsigned int n, last = nthreads - 1; - int ret; - cycles = kmalloc_array(nthreads, sizeof(*cycles), GFP_KERNEL); - if (!cycles) - return -ENOMEM; + cycles = kunit_kmalloc_array(test, nthreads, sizeof(*cycles), GFP_KERNEL); + KUNIT_ASSERT_NOT_NULL(test, cycles); for (n = 0; n < nthreads; n++) { struct test_cycle *cycle = &cycles[n]; @@ -348,41 +383,24 @@ static int __test_cycle(unsigned int nthreads) flush_workqueue(wq); - ret = 0; for (n = 0; n < nthreads; n++) { struct test_cycle *cycle = &cycles[n]; if (!cycle->result) continue; - pr_err("cyclic deadlock not resolved, ret[%d/%d] = %d\n", - n, nthreads, cycle->result); - ret = -EINVAL; + KUNIT_FAIL(test, "cyclic deadlock not resolved, ret[%d/%d] = %d", + n, nthreads, cycle->result); break; } for (n = 0; n < nthreads; n++) ww_mutex_destroy(&cycles[n].a_mutex); - kfree(cycles); - return ret; -} - -static int test_cycle(unsigned int ncpus) -{ - unsigned int n; - int ret; - - for (n = 2; n <= ncpus + 1; n++) { - ret = __test_cycle(n); - if (ret) - return ret; - } - - return 0; } struct stress { struct work_struct work; + struct kunit *test; struct ww_mutex *locks; unsigned long timeout; int nlocks; @@ -401,12 +419,12 @@ static inline u32 prandom_u32_below(u32 ceil) return ret; } -static int *get_random_order(int count) +static int *get_random_order(struct kunit *test, int count) { int *order; int n, r; - order = kmalloc_array(count, sizeof(*order), GFP_KERNEL); + order = kunit_kmalloc_array(test, count, sizeof(*order), GFP_KERNEL); if (!order) return order; @@ -435,7 +453,7 @@ static void stress_inorder_work(struct work_struct *work) struct ww_acquire_ctx ctx; int *order; - order = get_random_order(nlocks); + order = get_random_order(stress->test, nlocks); if (!order) return; @@ -472,13 +490,10 @@ static void stress_inorder_work(struct work_struct *work) ww_acquire_fini(&ctx); if (err) { - pr_err_once("stress (%s) failed with %d\n", - __func__, err); + KUNIT_FAIL(stress->test, "lock[%d] failed, err=%d", n, err); break; } } while (!time_after(jiffies, stress->timeout)); - - kfree(order); } struct reorder_lock { @@ -495,19 +510,16 @@ static void stress_reorder_work(struct work_struct *work) int *order; int n, err; - order = get_random_order(stress->nlocks); - if (!order) - return; + order = get_random_order(stress->test, stress->nlocks); + KUNIT_ASSERT_NOT_NULL(stress->test, order); for (n = 0; n < stress->nlocks; n++) { - ll = kmalloc(sizeof(*ll), GFP_KERNEL); - if (!ll) - goto out; + ll = kunit_kmalloc(stress->test, sizeof(*ll), GFP_KERNEL); + KUNIT_ASSERT_NOT_NULL(stress->test, ll); ll->lock = &stress->locks[order[n]]; list_add(&ll->link, &locks); } - kfree(order); order = NULL; do { @@ -523,8 +535,7 @@ static void stress_reorder_work(struct work_struct *work) ww_mutex_unlock(ln->lock); if (err != -EDEADLK) { - pr_err_once("stress (%s) failed with %d\n", - __func__, err); + KUNIT_FAIL(stress->test, "lock failed, err=%d", err); break; } @@ -538,11 +549,6 @@ static void stress_reorder_work(struct work_struct *work) ww_acquire_fini(&ctx); } while (!time_after(jiffies, stress->timeout)); - -out: - list_for_each_entry_safe(ll, ln, &locks, link) - kfree(ll); - kfree(order); } static void stress_one_work(struct work_struct *work) @@ -558,8 +564,7 @@ static void stress_one_work(struct work_struct *work) dummy_load(stress); ww_mutex_unlock(lock); } else { - pr_err_once("stress (%s) failed with %d\n", - __func__, err); + KUNIT_FAIL(stress->test, "lock failed, err=%d", err); break; } } while (!time_after(jiffies, stress->timeout)); @@ -570,22 +575,41 @@ static void stress_one_work(struct work_struct *work) #define STRESS_ONE BIT(2) #define STRESS_ALL (STRESS_INORDER | STRESS_REORDER | STRESS_ONE) -static int stress(int nlocks, int nthreads, unsigned int flags) +struct stress_case { + int nlocks; + int nthreads_per_cpu; + unsigned int flags; +}; + +static const struct stress_case stress_cases[] = { + { 16, 2, STRESS_INORDER }, + { 16, 2, STRESS_REORDER }, + { 2046, hweight32(STRESS_ALL), STRESS_ALL }, +}; + +static void stress_case_to_desc(const struct stress_case *param, char *desc) { + snprintf(desc, KUNIT_PARAM_DESC_SIZE, "nlocks=%d,nthreads_per_cpu=%d,flags=%x", + param->nlocks, param->nthreads_per_cpu, param->flags); +} + +KUNIT_ARRAY_PARAM(stress_cases, stress_cases, stress_case_to_desc); + +static void stress(struct kunit *test) +{ + const struct stress_case *param = test->param_value; + const int nlocks = param->nlocks; + int nthreads = param->nthreads_per_cpu * num_online_cpus(); + const unsigned int flags = param->flags; struct ww_mutex *locks; struct stress *stress_array; int n, count; - locks = kmalloc_array(nlocks, sizeof(*locks), GFP_KERNEL); - if (!locks) - return -ENOMEM; + locks = kunit_kmalloc_array(test, nlocks, sizeof(*locks), GFP_KERNEL); + KUNIT_ASSERT_NOT_NULL(test, locks); - stress_array = kmalloc_array(nthreads, sizeof(*stress_array), - GFP_KERNEL); - if (!stress_array) { - kfree(locks); - return -ENOMEM; - } + stress_array = kunit_kmalloc_array(test, nthreads, sizeof(*stress_array), GFP_KERNEL); + KUNIT_ASSERT_NOT_NULL(test, stress_array); for (n = 0; n < nlocks; n++) ww_mutex_init(&locks[n], &ww_class); @@ -617,6 +641,7 @@ static int stress(int nlocks, int nthreads, unsigned int flags) stress = &stress_array[count++]; INIT_WORK(&stress->work, fn); + stress->test = test; stress->locks = locks; stress->nlocks = nlocks; stress->timeout = jiffies + 2*HZ; @@ -629,70 +654,42 @@ static int stress(int nlocks, int nthreads, unsigned int flags) for (n = 0; n < nlocks; n++) ww_mutex_destroy(&locks[n]); - kfree(stress_array); - kfree(locks); - - return 0; } -static int __init test_ww_mutex_init(void) +static int ww_mutex_suite_init(struct kunit_suite *suite) { - int ncpus = num_online_cpus(); - int ret, i; - - printk(KERN_INFO "Beginning ww mutex selftests\n"); - - prandom_seed_state(&rng, get_random_u64()); - wq = alloc_workqueue("test-ww_mutex", WQ_UNBOUND, 0); if (!wq) return -ENOMEM; - ret = test_mutex(); - if (ret) - return ret; - - ret = test_aa(false); - if (ret) - return ret; - - ret = test_aa(true); - if (ret) - return ret; - - for (i = 0; i < 4; i++) { - ret = test_abba(i & 1, i & 2); - if (ret) - return ret; - } - - ret = test_cycle(ncpus); - if (ret) - return ret; - - ret = stress(16, 2*ncpus, STRESS_INORDER); - if (ret) - return ret; - - ret = stress(16, 2*ncpus, STRESS_REORDER); - if (ret) - return ret; - - ret = stress(2046, hweight32(STRESS_ALL)*ncpus, STRESS_ALL); - if (ret) - return ret; + prandom_seed_state(&rng, get_random_u64()); - printk(KERN_INFO "All ww mutex selftests passed\n"); return 0; } -static void __exit test_ww_mutex_exit(void) +static void ww_mutex_suite_exit(struct kunit_suite *suite) { - destroy_workqueue(wq); + if (wq) + destroy_workqueue(wq); } -module_init(test_ww_mutex_init); -module_exit(test_ww_mutex_exit); +static struct kunit_case ww_mutex_cases[] = { + KUNIT_CASE_PARAM(test_mutex, test_mutex_gen_params), + KUNIT_CASE_PARAM(test_aa, test_aa_gen_params), + KUNIT_CASE_PARAM(test_abba, test_abba_gen_params), + KUNIT_CASE_PARAM(test_cycle, test_cycle_gen_params), + KUNIT_CASE_PARAM_ATTR(stress, stress_cases_gen_params, {.speed = KUNIT_SPEED_SLOW}), + {}, +}; + +static struct kunit_suite ww_mutex_suite = { + .name = "ww_mutex", + .suite_init = ww_mutex_suite_init, + .suite_exit = ww_mutex_suite_exit, + .test_cases = ww_mutex_cases, +}; + +kunit_test_suite(ww_mutex_suite); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Intel Corporation"); diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 1af972a92d06..a7edcbdc1428 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -1586,16 +1586,18 @@ config LOCK_TORTURE_TEST Say M if you want these torture tests to build as a module. Say N if you are unsure. -config WW_MUTEX_SELFTEST - tristate "Wait/wound mutex selftests" +config WW_MUTEX_KUNIT_TEST + tristate "KUnit test for wait/wound mutex" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS help - This option provides a kernel module that runs tests on the - on the struct ww_mutex locking API. + This option provides a KUnit test that exercises the struct + ww_mutex locking API. It is recommended to enable DEBUG_WW_MUTEX_SLOWPATH in conjunction with this test harness. - Say M if you want these self tests to build as a module. + Say M if you want these tests to build as a module. Say N if you are unsure. config SCF_TORTURE_TEST diff --git a/tools/testing/selftests/locking/ww_mutex.sh b/tools/testing/selftests/locking/ww_mutex.sh deleted file mode 100755 index 91e4ac7566af..000000000000 --- a/tools/testing/selftests/locking/ww_mutex.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0 - -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - -# Runs API tests for struct ww_mutex (Wait/Wound mutexes) -if ! /sbin/modprobe -q -n test-ww_mutex; then - echo "ww_mutex: module test-ww_mutex is not found [SKIP]" - exit $ksft_skip -fi - -if /sbin/modprobe -q test-ww_mutex; then - /sbin/modprobe -q -r test-ww_mutex - echo "locking/ww_mutex: ok" -else - echo "locking/ww_mutex: [FAIL]" - exit 1 -fi --- base-commit: a64dcfb451e254085a7daee5fe51bf22959d52d3 change-id: 20250208-ww_mutex-kunit-convert-71842a7a6be2 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

4
6
0 0

[PATCH net-next v7 3/3] selftests: drv-net: Test queue xsk attribute

by Joe Damato

Test that queues which are used for AF_XDP have the xsk nest attribute. The attribute is currently empty, but its existence means the AF_XDP is being used for the queue. Enable CONFIG_XDP_SOCKETS for selftests/drivers/net tests, as well. Signed-off-by: Joe Damato <jdamato(a)fastly.com> Suggested-by: Jakub Kicinski <kuba(a)kernel.org> --- v7: - Added CONFIG_XDP_SOCKETS=y to selftests/drivers/net/config. - Updated xdp_helper to return -1 on AF_XDP non-existence, 1 for other failures. - Updated queues.py to skip if AF_XDP does not not exist, fail otherwise. v3: - Change comment style of helper C program to avoid kdoc warnings as suggested by Jakub. No other changes. v2: - Updated the Python test after changes to patch 1 which expose an empty nest - Updated Python test with general Python coding feedback .../testing/selftests/drivers/net/.gitignore | 2 + tools/testing/selftests/drivers/net/Makefile | 3 + tools/testing/selftests/drivers/net/config | 1 + tools/testing/selftests/drivers/net/queues.py | 42 +++++++- .../selftests/drivers/net/xdp_helper.c | 98 +++++++++++++++++++ 5 files changed, 143 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/.gitignore create mode 100644 tools/testing/selftests/drivers/net/xdp_helper.c diff --git a/tools/testing/selftests/drivers/net/.gitignore b/tools/testing/selftests/drivers/net/.gitignore new file mode 100644 index 000000000000..ec746f374e85 --- /dev/null +++ b/tools/testing/selftests/drivers/net/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +xdp_helper diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index 28b6d47f812d..68127c449c24 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -1,10 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 +CFLAGS += $(KHDR_INCLUDES) TEST_INCLUDES := $(wildcard lib/py/*.py) \ $(wildcard lib/sh/*.sh) \ ../../net/net_helper.sh \ ../../net/lib.sh \ +TEST_GEN_PROGS := xdp_helper + TEST_PROGS := \ netcons_basic.sh \ netcons_fragmented_msg.sh \ diff --git a/tools/testing/selftests/drivers/net/config b/tools/testing/selftests/drivers/net/config index a2d8af60876d..f27172ddee0a 100644 --- a/tools/testing/selftests/drivers/net/config +++ b/tools/testing/selftests/drivers/net/config @@ -4,3 +4,4 @@ CONFIG_CONFIGFS_FS=y CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETCONSOLE_EXTENDED_LOG=y +CONFIG_XDP_SOCKETS=y diff --git a/tools/testing/selftests/drivers/net/queues.py b/tools/testing/selftests/drivers/net/queues.py index 38303da957ee..5fdfebc6415f 100755 --- a/tools/testing/selftests/drivers/net/queues.py +++ b/tools/testing/selftests/drivers/net/queues.py @@ -2,13 +2,16 @@ # SPDX-License-Identifier: GPL-2.0 from lib.py import ksft_disruptive, ksft_exit, ksft_run -from lib.py import ksft_eq, ksft_raises, KsftSkipEx +from lib.py import ksft_eq, ksft_raises, KsftSkipEx, KsftFailEx from lib.py import EthtoolFamily, NetdevFamily, NlError from lib.py import NetDrvEnv from lib.py import cmd, defer, ip import errno import glob - +import os +import socket +import struct +import subprocess def sys_get_queues(ifname, qtype='rx') -> int: folders = glob.glob(f'/sys/class/net/{ifname}/queues/{qtype}-*') @@ -21,6 +24,39 @@ def nl_get_queues(cfg, nl, qtype='rx'): return len([q for q in queues if q['type'] == qtype]) return None +def check_xdp(cfg, nl, xdp_queue_id=0) -> None: + test_dir = os.path.dirname(os.path.realpath(__file__)) + xdp = subprocess.Popen([f"{test_dir}/xdp_helper", f"{cfg.ifindex}", f"{xdp_queue_id}"], + stdin=subprocess.PIPE, stdout=subprocess.PIPE, bufsize=1, + text=True) + defer(xdp.kill) + + stdout, stderr = xdp.communicate(timeout=10) + rx = tx = False + + if xdp.returncode == 255: + raise KsftSkipEx('AF_XDP unsupported') + elif xdp.returncode > 0: + raise KsftFailEx('unable to create AF_XDP socket') + + queues = nl.queue_get({'ifindex': cfg.ifindex}, dump=True) + if not queues: + raise KsftSkipEx("Netlink reports no queues") + + for q in queues: + if q['id'] == 0: + if q['type'] == 'rx': + rx = True + if q['type'] == 'tx': + tx = True + + ksft_eq(q['xsk'], {}) + else: + if 'xsk' in q: + _fail("Check failed: xsk attribute set.") + + ksft_eq(rx, True) + ksft_eq(tx, True) def get_queues(cfg, nl) -> None: snl = NetdevFamily(recv_size=4096) @@ -81,7 +117,7 @@ def check_down(cfg, nl) -> None: def main() -> None: with NetDrvEnv(__file__, queue_count=100) as cfg: - ksft_run([get_queues, addremove_queues, check_down], args=(cfg, NetdevFamily())) + ksft_run([get_queues, addremove_queues, check_down, check_xdp], args=(cfg, NetdevFamily())) ksft_exit() diff --git a/tools/testing/selftests/drivers/net/xdp_helper.c b/tools/testing/selftests/drivers/net/xdp_helper.c new file mode 100644 index 000000000000..2a40cc35d800 --- /dev/null +++ b/tools/testing/selftests/drivers/net/xdp_helper.c @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <errno.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <sys/mman.h> +#include <sys/socket.h> +#include <linux/if_xdp.h> +#include <linux/if_link.h> +#include <net/if.h> +#include <inttypes.h> + +#define UMEM_SZ (1U << 16) +#define NUM_DESC (UMEM_SZ / 2048) + +/* this is a simple helper program that creates an XDP socket and does the + * minimum necessary to get bind() to succeed. + * + * this test program is not intended to actually process packets, but could be + * extended in the future if that is actually needed. + * + * it is used by queues.py to ensure the xsk netlinux attribute is set + * correctly. + */ +int main(int argc, char **argv) +{ + struct xdp_umem_reg umem_reg = { 0 }; + struct sockaddr_xdp sxdp = { 0 }; + int num_desc = NUM_DESC; + void *umem_area; + int ifindex; + int sock_fd; + int queue; + char byte; + + if (argc != 3) { + fprintf(stderr, "Usage: %s ifindex queue_id", argv[0]); + return 1; + } + + sock_fd = socket(AF_XDP, SOCK_RAW, 0); + if (sock_fd < 0) { + perror("socket creation failed"); + /* if the kernel doesnt support AF_XDP, let the test program + * know with -1. All other error paths return 1. + */ + if (errno == EAFNOSUPPORT) + return -1; + return 1; + } + + ifindex = atoi(argv[1]); + queue = atoi(argv[2]); + + umem_area = mmap(NULL, UMEM_SZ, PROT_READ | PROT_WRITE, MAP_PRIVATE | + MAP_ANONYMOUS, -1, 0); + if (umem_area == MAP_FAILED) { + perror("mmap failed"); + return 1; + } + + umem_reg.addr = (uintptr_t)umem_area; + umem_reg.len = UMEM_SZ; + umem_reg.chunk_size = 2048; + umem_reg.headroom = 0; + + setsockopt(sock_fd, SOL_XDP, XDP_UMEM_REG, &umem_reg, + sizeof(umem_reg)); + setsockopt(sock_fd, SOL_XDP, XDP_UMEM_FILL_RING, &num_desc, + sizeof(num_desc)); + setsockopt(sock_fd, SOL_XDP, XDP_UMEM_COMPLETION_RING, &num_desc, + sizeof(num_desc)); + setsockopt(sock_fd, SOL_XDP, XDP_RX_RING, &num_desc, sizeof(num_desc)); + + sxdp.sxdp_family = AF_XDP; + sxdp.sxdp_ifindex = ifindex; + sxdp.sxdp_queue_id = queue; + sxdp.sxdp_flags = 0; + + if (bind(sock_fd, (struct sockaddr *)&sxdp, sizeof(sxdp)) != 0) { + munmap(umem_area, UMEM_SZ); + perror("bind failed"); + close(sock_fd); + return 1; + } + + /* give the parent program some data when the socket is ready*/ + fprintf(stdout, "%d\n", sock_fd); + + /* parent program will write a byte to stdin when its ready for this + * helper to exit + */ + read(STDIN_FILENO, &byte, 1); + + close(sock_fd); + return 0; +} -- 2.43.0

2 months, 2 weeks

1
0
0 0

[PATCH net-next v7 0/3] netdev-genl: Add an xsk attribute to queues

by Joe Damato

Greetings: Welcome to v7. Added CONFIG_XDP_SOCKETS to the selftests/driver/net kernel config in patch 3. Updated the xdp_helper.c to return -1 on AF_XDP non-existence, and updated queues.py to skip the test if AF_XDP does not exist (but fail in other failure cases). Tested on kernels with and without CONFIG_XDP_SOCKETS enabled. This is an attempt to followup on something Jakub asked me about [1], adding an xsk attribute to queues and more clearly documenting which queues are linked to NAPIs... After the RFC [2], Jakub suggested creating an empty nest for queues which have a pool, so I've adjusted this version to work that way. The nest can be extended in the future to express attributes about XSK as needed. Queues which are not used for AF_XDP do not have the xsk attribute present. I've run the included test on: - my mlx5 machine (via NETIF=) - without setting NETIF And the test seems to pass in both cases. Thanks, Joe [1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/ [2]: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ v7: - Added CONFIG_XDP_SOCKETS to selftests/driver/net/config as suggested by Stanislav. - Updated xdp_helper.c to return -1 for AF_XDP non-existence, but 1 for other failures. - Updated queues.py to mark test as skipped if AF_XDP does not exist. v6: https://lore.kernel.org/bpf/20250210193903.16235-1-jdamato@fastly.com/ - Added ifdefs for CONFIG_XDP_SOCKETS in patch 2 as Stanislav suggested. v5: https://lore.kernel.org/bpf/20250208041248.111118-1-jdamato@fastly.com/ - Removed unused ret variable from patch 2 as Simon suggested. v4: https://lore.kernel.org/lkml/20250207030916.32751-1-jdamato@fastly.com/ - Add patch 1, as suggested by Jakub, which adds an empty nest helper. - Use the helper in patch 2, which makes the code cleaner and prevents a possible bug. v3: https://lore.kernel.org/netdev/20250204191108.161046-1-jdamato@fastly.com/ - Change comment format in patch 2 to avoid kdoc warnings. No other changes. v2: https://lore.kernel.org/all/20250203185828.19334-1-jdamato@fastly.com/ - Switched from RFC to actual submission now that net-next is open - Adjusted patch 1 to include an empty nest as suggested by Jakub - Adjusted patch 2 to update the test based on changes to patch 1, and to incorporate some Python feedback from Jakub :) rfc: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ Joe Damato (3): netlink: Add nla_put_empty_nest helper netdev-genl: Add an XSK attribute to queues selftests: drv-net: Test queue xsk attribute Documentation/netlink/specs/netdev.yaml | 13 ++- include/net/netlink.h | 15 +++ include/uapi/linux/netdev.h | 6 ++ net/core/netdev-genl.c | 12 +++ tools/include/uapi/linux/netdev.h | 6 ++ .../testing/selftests/drivers/net/.gitignore | 2 + tools/testing/selftests/drivers/net/Makefile | 3 + tools/testing/selftests/drivers/net/config | 1 + tools/testing/selftests/drivers/net/queues.py | 42 +++++++- .../selftests/drivers/net/xdp_helper.c | 98 +++++++++++++++++++ 10 files changed, 194 insertions(+), 4 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/.gitignore create mode 100644 tools/testing/selftests/drivers/net/xdp_helper.c base-commit: 4e41231249f4083a095085ff86e317e29313c2c3 -- 2.43.0

2 months, 2 weeks

1
0
0 0

[PATCH net-next v6 0/3] netdev-genl: Add an xsk attribute to queues

by Joe Damato

Greetings Welcome to v6. Added ifdefs to patch 2 and built with CONFIG_XDP_SOCKETS both enabled and disabled to confirm it builds cleanly. No other changes. This is an attempt to followup on something Jakub asked me about [1], adding an xsk attribute to queues and more clearly documenting which queues are linked to NAPIs... After the RFC [2], Jakub suggested creating an empty nest for queues which have a pool, so I've adjusted this version to work that way. The nest can be extended in the future to express attributes about XSK as needed. Queues which are not used for AF_XDP do not have the xsk attribute present. I've run the included test on: - my mlx5 machine (via NETIF=) - without setting NETIF And the test seems to pass in both cases. Thanks, Joe [1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/ [2]: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ v6: - Added ifdefs for CONFIG_XDP_SOCKETS in patch 2 as Stanislav suggested. v5: https://lore.kernel.org/bpf/20250208041248.111118-1-jdamato@fastly.com/ - Removed unused ret variable from patch 2 as Simon suggested. v4: https://lore.kernel.org/lkml/20250207030916.32751-1-jdamato@fastly.com/ - Add patch 1, as suggested by Jakub, which adds an empty nest helper. - Use the helper in patch 2, which makes the code cleaner and prevents a possible bug. v3: https://lore.kernel.org/netdev/20250204191108.161046-1-jdamato@fastly.com/ - Change comment format in patch 2 to avoid kdoc warnings. No other changes. v2: https://lore.kernel.org/all/20250203185828.19334-1-jdamato@fastly.com/ - Switched from RFC to actual submission now that net-next is open - Adjusted patch 1 to include an empty nest as suggested by Jakub - Adjusted patch 2 to update the test based on changes to patch 1, and to incorporate some Python feedback from Jakub :) rfc: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ Joe Damato (3): netlink: Add nla_put_empty_nest helper netdev-genl: Add an XSK attribute to queues selftests: drv-net: Test queue xsk attribute Documentation/netlink/specs/netdev.yaml | 13 ++- include/net/netlink.h | 15 ++++ include/uapi/linux/netdev.h | 6 ++ net/core/netdev-genl.c | 12 +++ tools/include/uapi/linux/netdev.h | 6 ++ .../testing/selftests/drivers/net/.gitignore | 2 + tools/testing/selftests/drivers/net/Makefile | 3 + tools/testing/selftests/drivers/net/queues.py | 35 +++++++- .../selftests/drivers/net/xdp_helper.c | 89 +++++++++++++++++++ 9 files changed, 178 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/.gitignore create mode 100644 tools/testing/selftests/drivers/net/xdp_helper.c base-commit: 39f54262ba499d862420a97719d2f0eea0cbd394 -- 2.43.0

2 months, 2 weeks

4
9
0 0

[PATCH v5 1/2] selftests/futex: Add ASSERT_ macros

by André Almeida

Create ASSERT_{EQ, NE, TRUE, FALSE} macros to make test creation easier. Signed-off-by: André Almeida <andrealmeid(a)igalia.com> --- .../testing/selftests/futex/include/logging.h | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/tools/testing/selftests/futex/include/logging.h b/tools/testing/selftests/futex/include/logging.h index 874c69ce5cce..a19755622a87 100644 --- a/tools/testing/selftests/futex/include/logging.h +++ b/tools/testing/selftests/futex/include/logging.h @@ -23,6 +23,44 @@ #include <linux/futex.h> #include "kselftest.h" +#define ASSERT_EQ(var, value) \ +do { \ + if (var != value) { \ + ksft_test_result_fail("%s: expected %ld, but %s has %ld\n", \ + __func__, (long) value, #var, \ + (long) var); \ + return; \ + } \ +} while (0) + +#define ASSERT_NE(var, value) \ +do { \ + if (var == value) { \ + ksft_test_result_fail("%s: expected not %ld, but %s has %ld\n", \ + __func__, (long) value, #var, \ + (long) var); \ + return; \ + } \ +} while (0) + +#define ASSERT_TRUE(var) \ +do { \ + if ((var) == 0) { \ + ksft_test_result_fail("%s: expected %s to be true\n", \ + __func__, #var); \ + return; \ + } \ +} while (0) + +#define ASSERT_FALSE(var) \ +do { \ + if (var) { \ + ksft_test_result_fail("%s: expected %s to be false\n", \ + __func__, #var); \ + return; \ + } \ +} while (0) + /* * Define PASS, ERROR, and FAIL strings with and without color escape * sequences, default to no color. -- 2.48.1

2 months, 2 weeks

1
1
0 0

[PATCH 0/2] kunit: qemu_configs: Add MIPS configurations

by Thomas Weißschuh

Add basic support to run various MIPS variants via kunit_tool using the virtualized malta platform. Various kunit tests from drivers/firmware/cirrus/ are failing on MIPS. They are fixed in [0]. [0] https://lore.kernel.org/lkml/20250211-cs_dsp-kunit-strings-v1-1-d9bc2035d15… Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- Thomas Weißschuh (2): MIPS: mm: Avoid blocking DMA zone with memory map memblock allocation kunit: qemu_configs: Add MIPS configurations arch/mips/mm/init.c | 2 ++ tools/testing/kunit/qemu_configs/mips.py | 18 ++++++++++++++++++ tools/testing/kunit/qemu_configs/mips64.py | 19 +++++++++++++++++++ tools/testing/kunit/qemu_configs/mips64el.py | 19 +++++++++++++++++++ tools/testing/kunit/qemu_configs/mipsel.py | 18 ++++++++++++++++++ 5 files changed, 76 insertions(+) --- base-commit: 6e24361511062dba8c5f7e59d51b29cdfa859523 change-id: 20241014-kunit-mips-e4fe1c265ed7 Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

2 months, 2 weeks

1
2
0 0

[PATCH 0/2] printf: convert self-test to KUnit

by Tamir Duberstein

This is one of just 3 remaining "Test Module" kselftests (the others being bitmap and scanf), the rest having been converted to KUnit. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 printf I have also sent out a series converting scanf[0]. Link: https://lore.kernel.org/all/20250204-scanf-kunit-convert-v3-0-386d7c3ee714@… [0] Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Tamir Duberstein (2): printf: convert self-test to KUnit printf: break kunit into test cases Documentation/core-api/printk-formats.rst | 2 +- MAINTAINERS | 2 +- arch/m68k/configs/amiga_defconfig | 1 - arch/m68k/configs/apollo_defconfig | 1 - arch/m68k/configs/atari_defconfig | 1 - arch/m68k/configs/bvme6000_defconfig | 1 - arch/m68k/configs/hp300_defconfig | 1 - arch/m68k/configs/mac_defconfig | 1 - arch/m68k/configs/multi_defconfig | 1 - arch/m68k/configs/mvme147_defconfig | 1 - arch/m68k/configs/mvme16x_defconfig | 1 - arch/m68k/configs/q40_defconfig | 1 - arch/m68k/configs/sun3_defconfig | 1 - arch/m68k/configs/sun3x_defconfig | 1 - arch/powerpc/configs/ppc64_defconfig | 1 - lib/Kconfig.debug | 20 +- lib/Makefile | 2 +- lib/printf_kunit.c | 757 ++++++++++++++++++++++++++ lib/test_printf.c | 863 ------------------------------ tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/printf.sh | 4 - 21 files changed, 777 insertions(+), 887 deletions(-) --- base-commit: a86bf2283d2c9769205407e2b54777c03d012939 change-id: 20250131-printf-kunit-convert-fd4012aa2ec6 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

4
14
0 0

[PATCH] selftests: timers: Improve clarity in time difference message

by Rohit Yadav

Signed-off-by: Rohit Yadav <rohityadavconnect(a)gmail.com> --- tools/testing/selftests/timers/posix_timers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/timers/posix_timers.c b/tools/testing/selftests/timers/posix_timers.c index 9814b3a1c77d..f6e3730c63b5 100644 --- a/tools/testing/selftests/timers/posix_timers.c +++ b/tools/testing/selftests/timers/posix_timers.c @@ -88,7 +88,7 @@ static int check_diff(struct timeval start, struct timeval end) diff += (end.tv_sec - start.tv_sec) * USEC_PER_SEC; if (llabs(diff - DELAY * USEC_PER_SEC) > USEC_PER_SEC / 2) { - printf("Diff too high: %lld..", diff); + printf("Time difference too high: %lld\n", diff); return -1; } -- 2.43.0

2 months, 2 weeks

1
0
0 0

[PATCH v2 1/2] selftests/bpf: Define SYS_PREFIX for powerpc

by Saket Kumar Bhaskar

Since commit 7e92e01b7245 ("powerpc: Provide syscall wrapper") landed in v6.1, syscall wrapper is enabled on powerpc. Commit 94746890202c ("powerpc: Don't add __powerpc_ prefix to syscall entry points") , that drops the prefix to syscall entry points, also landed in the same release. So, add the missing empty SYS_PREFIX prefix definition for powerpc, to fix some fentry and kprobe selftests. Signed-off-by: Saket Kumar Bhaskar <skb99(a)linux.ibm.com> --- tools/testing/selftests/bpf/progs/bpf_misc.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/selftests/bpf/progs/bpf_misc.h b/tools/testing/selftests/bpf/progs/bpf_misc.h index f45f4352f..02c9f7964 100644 --- a/tools/testing/selftests/bpf/progs/bpf_misc.h +++ b/tools/testing/selftests/bpf/progs/bpf_misc.h @@ -172,6 +172,9 @@ #elif defined(__TARGET_ARCH_riscv) #define SYSCALL_WRAPPER 1 #define SYS_PREFIX "__riscv_" +#elif defined(__TARGET_ARCH_powerpc) +#define SYSCALL_WRAPPER 1 +#define SYS_PREFIX "" #else #define SYSCALL_WRAPPER 0 #define SYS_PREFIX "__se_" -- 2.43.5

2 months, 2 weeks

3
4
0 0

[PATCH v2] blackhole_dev: convert self-test to KUnit

by Tamir Duberstein

Convert this very simple smoke test to a KUnit test. Add a missing `htons` call that was spotted[0] by kernel test robot <lkp(a)intel.com> after initial conversion to KUnit. Link: https://lore.kernel.org/oe-kbuild-all/202502090223.qCYMBjWT-lkp@intel.com/ [0] Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 --kconfig_add CONFIG_NET=y blackholedev --- Changes in v2: - Add missing `htons` call. (kernel test robot <lkp(a)intel.com>) - Link to v1: https://lore.kernel.org/r/20250207-blackholedev-kunit-convert-v1-1-8ef0dc1f… --- lib/Kconfig.debug | 20 ++++----- lib/Makefile | 2 +- ...{test_blackhole_dev.c => blackhole_dev_kunit.c} | 47 ++++++++-------------- tools/testing/selftests/net/Makefile | 2 +- tools/testing/selftests/net/test_blackhole_dev.sh | 11 ----- 5 files changed, 29 insertions(+), 53 deletions(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 1af972a92d06..238321830993 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2557,15 +2557,6 @@ config TEST_BPF If unsure, say N. -config TEST_BLACKHOLE_DEV - tristate "Test blackhole netdev functionality" - depends on m && NET - help - This builds the "test_blackhole_dev" module that validates the - data path through this blackhole netdev. - - If unsure, say N. - config FIND_BIT_BENCHMARK tristate "Test find_bit functions" help @@ -2888,6 +2879,17 @@ config USERCOPY_KUNIT_TEST on the copy_to/from_user infrastructure, making sure basic user/kernel boundary testing is working. +config BLACKHOLE_DEV_KUNIT_TEST + tristate "Test blackhole netdev functionality" if !KUNIT_ALL_TESTS + depends on NET + depends on KUNIT + default KUNIT_ALL_TESTS + help + This builds the "blackhole_dev_kunit" module that validates the + data path through this blackhole netdev. + + If unsure, say N. + config TEST_UDELAY tristate "udelay test driver" help diff --git a/lib/Makefile b/lib/Makefile index d5cfc7afbbb8..19ff6993c2bc 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -102,7 +102,6 @@ obj-$(CONFIG_TEST_RUNTIME) += tests/ obj-$(CONFIG_TEST_DEBUG_VIRTUAL) += test_debug_virtual.o obj-$(CONFIG_TEST_MEMCAT_P) += test_memcat_p.o obj-$(CONFIG_TEST_OBJAGG) += test_objagg.o -obj-$(CONFIG_TEST_BLACKHOLE_DEV) += test_blackhole_dev.o obj-$(CONFIG_TEST_MEMINIT) += test_meminit.o obj-$(CONFIG_TEST_LOCKUP) += test_lockup.o obj-$(CONFIG_TEST_HMM) += test_hmm.o @@ -393,6 +392,7 @@ obj-$(CONFIG_FORTIFY_KUNIT_TEST) += fortify_kunit.o obj-$(CONFIG_CRC_KUNIT_TEST) += crc_kunit.o obj-$(CONFIG_SIPHASH_KUNIT_TEST) += siphash_kunit.o obj-$(CONFIG_USERCOPY_KUNIT_TEST) += usercopy_kunit.o +obj-$(CONFIG_BLACKHOLE_DEV_KUNIT_TEST) += blackhole_dev_kunit.o obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o diff --git a/lib/test_blackhole_dev.c b/lib/blackhole_dev_kunit.c similarity index 68% rename from lib/test_blackhole_dev.c rename to lib/blackhole_dev_kunit.c index ec290ac2a0d9..06834ab35f43 100644 --- a/lib/test_blackhole_dev.c +++ b/lib/blackhole_dev_kunit.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * This module tests the blackhole_dev that is created during the + * This tests the blackhole_dev that is created during the * net subsystem initialization. The test this module performs is * by injecting an skb into the stack with skb->dev as the * blackhole_dev and expects kernel to behave in a sane manner @@ -9,9 +9,8 @@ * Copyright (c) 2018, Mahesh Bandewar <maheshb(a)google.com> */ -#include <linux/init.h> +#include <kunit/test.h> #include <linux/module.h> -#include <linux/printk.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/udp.h> @@ -25,17 +24,15 @@ #define UDP_PORT 1234 -static int __init test_blackholedev_init(void) +static void test_blackholedev(struct kunit *test) { struct ipv6hdr *ip6h; struct sk_buff *skb; struct udphdr *uh; int data_len; - int ret; skb = alloc_skb(SKB_SIZE, GFP_KERNEL); - if (!skb) - return -ENOMEM; + KUNIT_ASSERT_NOT_NULL(test, skb); /* Reserve head-room for the headers */ skb_reserve(skb, HEAD_SIZE); @@ -55,7 +52,7 @@ static int __init test_blackholedev_init(void) ip6h = (struct ipv6hdr *)skb_push(skb, sizeof(struct ipv6hdr)); skb_set_network_header(skb, 0); ip6h->hop_limit = 32; - ip6h->payload_len = data_len + sizeof(struct udphdr); + ip6h->payload_len = htons(data_len + sizeof(struct udphdr)); ip6h->nexthdr = IPPROTO_UDP; ip6h->saddr = in6addr_loopback; ip6h->daddr = in6addr_loopback; @@ -68,32 +65,20 @@ static int __init test_blackholedev_init(void) skb->dev = blackhole_netdev; /* Now attempt to send the packet */ - ret = dev_queue_xmit(skb); - - switch (ret) { - case NET_XMIT_SUCCESS: - pr_warn("dev_queue_xmit() returned NET_XMIT_SUCCESS\n"); - break; - case NET_XMIT_DROP: - pr_warn("dev_queue_xmit() returned NET_XMIT_DROP\n"); - break; - case NET_XMIT_CN: - pr_warn("dev_queue_xmit() returned NET_XMIT_CN\n"); - break; - default: - pr_err("dev_queue_xmit() returned UNKNOWN(%d)\n", ret); - } - - return 0; + KUNIT_EXPECT_EQ(test, dev_queue_xmit(skb), NET_XMIT_SUCCESS); } -static void __exit test_blackholedev_exit(void) -{ - pr_warn("test_blackholedev module terminating.\n"); -} +static struct kunit_case blackholedev_cases[] = { + KUNIT_CASE(test_blackholedev), + {}, +}; + +static struct kunit_suite blackholedev_suite = { + .name = "blackholedev", + .test_cases = blackholedev_cases, +}; -module_init(test_blackholedev_init); -module_exit(test_blackholedev_exit); +kunit_test_suite(blackholedev_suite); MODULE_AUTHOR("Mahesh Bandewar <maheshb(a)google.com>"); MODULE_DESCRIPTION("module test of the blackhole_dev"); diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 73ee88d6b043..afa4bcdc5833 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -7,7 +7,7 @@ CFLAGS += -I../../../../usr/include/ $(KHDR_INCLUDES) CFLAGS += -I../ TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh netdevice.sh \ - rtnetlink.sh xfrm_policy.sh test_blackhole_dev.sh + rtnetlink.sh xfrm_policy.sh TEST_PROGS += fib_tests.sh fib-onlink-tests.sh pmtu.sh udpgso.sh ip_defrag.sh TEST_PROGS += udpgso_bench.sh fib_rule_tests.sh msg_zerocopy.sh psock_snd.sh TEST_PROGS += udpgro_bench.sh udpgro.sh test_vxlan_under_vrf.sh reuseport_addr_any.sh diff --git a/tools/testing/selftests/net/test_blackhole_dev.sh b/tools/testing/selftests/net/test_blackhole_dev.sh deleted file mode 100755 index 3119b80e711f..000000000000 --- a/tools/testing/selftests/net/test_blackhole_dev.sh +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0 -# Runs blackhole-dev test using blackhole-dev kernel module - -if /sbin/modprobe -q test_blackhole_dev ; then - /sbin/modprobe -q -r test_blackhole_dev; - echo "test_blackhole_dev: ok"; -else - echo "test_blackhole_dev: [FAIL]"; - exit 1; -fi --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250207-blackholedev-kunit-convert-9a52a1a1a032 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

2
2
0 0

[PATCH v4] selftests: tpm2: test_smoke: use POSIX-conformant expression operator

by Ahmed Salem

Use POSIX-conformant expression operator symbol '='. The use of the non POSIX-conformant symbol '==' would work in bash, but not in sh where the unexpected operator error would result in test_smoke.sh being skipped. Instead of changing the shebang to use bash, which may not be available on all systems, use the POSIX-conformant expression symbol '=' to test for equality. Without this patch: =================== # make -j8 TARGETS=tpm2 kselftest # selftests: tpm2: test_smoke.sh # ./test_smoke.sh: 9: [: 2: unexpected operator ok 1 selftests: tpm2: test_smoke.sh # SKIP With this patch: ================ # make -j8 TARGETS=tpm2 kselftest # selftests: tpm2: test_smoke.sh # Ran 9 tests in 9.236s ok 1 selftests: tpm2: test_smoke.sh Signed-off-by: Ahmed Salem <x0rw3ll(a)gmail.com> --- Changes in v4: - Include relevant parts of the script showing the issue before and after the patch Changes in v3: - Reword mistaken commit message Changes in v2: - Remove snippets pinpointing the issue from commit message tools/testing/selftests/tpm2/test_smoke.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh index 168f4b166234..3a60e6c6f5c9 100755 --- a/tools/testing/selftests/tpm2/test_smoke.sh +++ b/tools/testing/selftests/tpm2/test_smoke.sh @@ -6,6 +6,6 @@ ksft_skip=4 [ -e /dev/tpm0 ] || exit $ksft_skip read tpm_version < /sys/class/tpm/tpm0/tpm_version_major -[ "$tpm_version" == 2 ] || exit $ksft_skip +[ "$tpm_version" = 2 ] || exit $ksft_skip python3 -m unittest -v tpm2_tests.SmokeTest 2>&1 base-commit: 34c26c5e1cb0cc7f54c1b89c6e9168cad8ffb580 -- 2.47.2

2 months, 2 weeks

2
1
0 0

[PATCH v3] selftests: tpm2: test_smoke: use POSIX-conformant expression operator

by Ahmed Salem

Use POSIX-conformant operator symbol '='. Signed-off-by: Ahmed Salem <x0rw3ll(a)gmail.com> --- Apologies for my previous mistakes. Changes in v3: - Reword mistaken commit message Changes in v2: - Remove snippets pinpointing the issue from commit message tools/testing/selftests/tpm2/test_smoke.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh index 168f4b166234..3a60e6c6f5c9 100755 --- a/tools/testing/selftests/tpm2/test_smoke.sh +++ b/tools/testing/selftests/tpm2/test_smoke.sh @@ -6,6 +6,6 @@ ksft_skip=4 [ -e /dev/tpm0 ] || exit $ksft_skip read tpm_version < /sys/class/tpm/tpm0/tpm_version_major -[ "$tpm_version" == 2 ] || exit $ksft_skip +[ "$tpm_version" = 2 ] || exit $ksft_skip python3 -m unittest -v tpm2_tests.SmokeTest 2>&1 -- 2.47.2

2 months, 2 weeks

2
3
0 0

[PATCH bpf-next v1 0/2] selftests: fix two small compilation errors

by Jason Xing

Fix them separately in each patch. Jason Xing (2): bpf: changes_pkt_data: correct the 'main' error bpf: sockopt_sk: fix 'undeclared' definition error .../selftests/bpf/prog_tests/changes_pkt_data.c | 12 ++++++------ tools/testing/selftests/bpf/prog_tests/sockopt_sk.c | 2 +- 2 files changed, 7 insertions(+), 7 deletions(-) -- 2.43.5

2 months, 2 weeks

3
11
0 0

[PATCH] selftests: net: fix grammar in reuseaddr_ports_exhausted.c log message

by Pranav Tyagi

This patch fixes a grammatical error in a test log message in reuseaddr_ports_exhausted.c for better clarity as a part of lfx application tasks Signed-off-by: Pranav Tyagi <pranav.tyagi03(a)gmail.com> --- tools/testing/selftests/net/reuseaddr_ports_exhausted.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/reuseaddr_ports_exhausted.c b/tools/testing/selftests/net/reuseaddr_ports_exhausted.c index 066efd30e294..7b9bf8a7bbe1 100644 --- a/tools/testing/selftests/net/reuseaddr_ports_exhausted.c +++ b/tools/testing/selftests/net/reuseaddr_ports_exhausted.c @@ -112,7 +112,7 @@ TEST(reuseaddr_ports_exhausted_reusable_same_euid) ASSERT_NE(-1, fd[0]) TH_LOG("failed to bind."); if (opts->reuseport[0] && opts->reuseport[1]) { - EXPECT_EQ(-1, fd[1]) TH_LOG("should fail to bind because both sockets succeed to be listened."); + EXPECT_EQ(-1, fd[1]) TH_LOG("should fail to bind because both sockets successfully listened."); } else { EXPECT_NE(-1, fd[1]) TH_LOG("should succeed to bind to connect to different destinations."); } -- 2.47.1

2 months, 2 weeks

2
1
0 0

[PATCH v5 0/2] lib/prime_numbers: convert self-test to KUnit

by Tamir Duberstein

This is a clear example of a unit test. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 math-prime_numbers On success: ; [08:51:41] ============== math-prime_numbers (1 subtest) ============== ; [08:51:41] [PASSED] prime_numbers_test ; [08:51:41] =============== [PASSED] math-prime_numbers ================ ; [08:51:41] ============================================================ ; [08:51:41] Testing complete. Ran 1 tests: passed: 1 On failure: ; [08:50:19] ============== math-prime_numbers (1 subtest) ============== ; [08:50:19] # prime_numbers_test: ASSERTION FAILED at lib/math/tests/prime_numbers_kunit.c:28 ; [08:50:19] Expected slow == fast, but ; [08:50:19] slow == 0 (0x0) ; [08:50:19] fast == 1 (0x1) ; [08:50:19] is-prime(2) ; [08:50:19] [FAILED] prime_numbers_test ; [08:50:19] # module: prime_numbers_kunit ; [08:50:19] # math-prime_numbers: primes.{last=61, .sz=64, .primes[]=...x28208a20a08a28ac} = 2-3,5,7,11,13,17,19,23,29,31,37,41,43,47,53,59,61 ; [08:50:19] =============== [FAILED] math-prime_numbers ================ ; [08:50:19] ============================================================ ; [08:50:19] Testing complete. Ran 1 tests: failed: 1 Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v5: - Rebase against mm/mm-everything. - Correctly EXPORT_SYMBOL(with_primes). - Link to v4: https://lore.kernel.org/r/20250208-prime_numbers-kunit-convert-v4-0-76e36bc… Apologies for the churn. Changes in v4: - Use `#if IS_ENABLED` to handle `CONFIG_PRIME_NUMBERS_KUNIT_TEST=m`. (Andrew Morton) - Link to v3: https://lore.kernel.org/r/20250208-prime_numbers-kunit-convert-v3-0-8ffd581… Changes in v3: - Remove `selftest_max` again; snuck into v2. - Restore `#include <linux/slab.h>`. - Sending v3 early because kernel test robot is sad. - Link to v2: https://lore.kernel.org/r/20250208-prime_numbers-kunit-convert-v2-0-8631194… Changes in v2: - Keep all the details hidden in prime_numbers.c; expose `with_primes` for debug logging in the test. (David Gow) - Link to v1: https://lore.kernel.org/r/20250207-prime_numbers-kunit-convert-v1-0-6067f2b… --- Tamir Duberstein (2): lib/math: Hook up tests/Makefile lib/prime_numbers: convert self-test to KUnit lib/Kconfig.debug | 14 +++++ lib/math/Makefile | 5 +- lib/math/prime_numbers.c | 87 +++++----------------------- lib/math/prime_numbers_private.h | 17 ++++++ lib/math/tests/Makefile | 1 + lib/math/tests/prime_numbers_kunit.c | 59 +++++++++++++++++++ tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/prime_numbers.sh | 4 -- 8 files changed, 108 insertions(+), 80 deletions(-) --- base-commit: feb950f421d199acfe2503302f49632abfcf8663 change-id: 20250207-prime_numbers-kunit-convert-71c9b3c1d1d4 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

2
8
0 0

[PATCH v6 0/2] scanf: convert self-test to KUnit

by Tamir Duberstein

This is one of just 3 remaining "Test Module" kselftests (the others being bitmap and printf), the rest having been converted to KUnit. In addition to the enclosed patch, please consider this an RFC on the removal of the "Test Module" kselftest machinery. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 scanf Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v6: - s/at boot/at runtime/ for consistency with the printf series. - Go back to kmalloc. (Geert Uytterhoeven) - Link to v5: https://lore.kernel.org/r/20250210-scanf-kunit-convert-v5-0-8e64f3a7de99@gm… Changes in v5: - Remove extraneous trailing newlines from failure messages. - Replace `pr_debug` with `kunit_printk`. - Use static char arrays instead of kmalloc. - Drop KUnit boilerplate from CONFIG_SCANF_KUNIT_TEST help text. - Drop arch changes. - Link to v4: https://lore.kernel.org/r/20250207-scanf-kunit-convert-v4-0-a23e2afaede8@gm… Changes in v4: - Bake `test` into various macros, greatly reducing diff noise. - Revert control flow changes. - Link to v3: https://lore.kernel.org/r/20250204-scanf-kunit-convert-v3-0-386d7c3ee714@gm… Changes in v3: - Reduce diff noise in lib/Makefile. (Petr Mladek) - Split `scanf_test` into a few test cases. New output: : =================== scanf (10 subtests) ==================== : [PASSED] numbers_simple : ====================== numbers_list ======================= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ================== [PASSED] numbers_list =================== : ============ numbers_list_field_width_typemax ============= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======== [PASSED] numbers_list_field_width_typemax ========= : =========== numbers_list_field_width_val_width ============ : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======= [PASSED] numbers_list_field_width_val_width ======== : [PASSED] numbers_slice : [PASSED] numbers_prefix_overflow : [PASSED] test_simple_strtoull : [PASSED] test_simple_strtoll : [PASSED] test_simple_strtoul : [PASSED] test_simple_strtol : ====================== [PASSED] scanf ====================== : ============================================================ : Testing complete. Ran 22 tests: passed: 22 : Elapsed time: 5.517s total, 0.001s configuring, 5.440s building, 0.067s running - Link to v2: https://lore.kernel.org/r/20250203-scanf-kunit-convert-v2-1-277a618d804e@gm… Changes in v2: - Rename lib/{test_scanf.c => scanf_kunit.c}. (Andy Shevchenko) - Link to v1: https://lore.kernel.org/r/20250131-scanf-kunit-convert-v1-1-0976524f0eba@gm… --- Tamir Duberstein (2): scanf: convert self-test to KUnit scanf: break kunit into test cases MAINTAINERS | 2 +- lib/Kconfig.debug | 12 +- lib/Makefile | 2 +- lib/{test_scanf.c => scanf_kunit.c} | 274 +++++++++++++++++------------------ tools/testing/selftests/lib/Makefile | 2 +- tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/scanf.sh | 4 - 7 files changed, 145 insertions(+), 152 deletions(-) --- base-commit: a64dcfb451e254085a7daee5fe51bf22959d52d3 change-id: 20250131-scanf-kunit-convert-f70dc33bb34c Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

3
10
0 0

[PATCH] blackhole_dev: convert self-test to KUnit

by Tamir Duberstein

Convert this very simple smoke test to a KUnit test. Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 --kconfig_add CONFIG_NET=y blackholedev --- lib/Kconfig.debug | 20 +++++----- lib/Makefile | 2 +- ...{test_blackhole_dev.c => blackhole_dev_kunit.c} | 45 ++++++++-------------- tools/testing/selftests/net/Makefile | 2 +- tools/testing/selftests/net/test_blackhole_dev.sh | 11 ------ 5 files changed, 28 insertions(+), 52 deletions(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 1af972a92d06..238321830993 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2557,15 +2557,6 @@ config TEST_BPF If unsure, say N. -config TEST_BLACKHOLE_DEV - tristate "Test blackhole netdev functionality" - depends on m && NET - help - This builds the "test_blackhole_dev" module that validates the - data path through this blackhole netdev. - - If unsure, say N. - config FIND_BIT_BENCHMARK tristate "Test find_bit functions" help @@ -2888,6 +2879,17 @@ config USERCOPY_KUNIT_TEST on the copy_to/from_user infrastructure, making sure basic user/kernel boundary testing is working. +config BLACKHOLE_DEV_KUNIT_TEST + tristate "Test blackhole netdev functionality" if !KUNIT_ALL_TESTS + depends on NET + depends on KUNIT + default KUNIT_ALL_TESTS + help + This builds the "blackhole_dev_kunit" module that validates the + data path through this blackhole netdev. + + If unsure, say N. + config TEST_UDELAY tristate "udelay test driver" help diff --git a/lib/Makefile b/lib/Makefile index d5cfc7afbbb8..19ff6993c2bc 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -102,7 +102,6 @@ obj-$(CONFIG_TEST_RUNTIME) += tests/ obj-$(CONFIG_TEST_DEBUG_VIRTUAL) += test_debug_virtual.o obj-$(CONFIG_TEST_MEMCAT_P) += test_memcat_p.o obj-$(CONFIG_TEST_OBJAGG) += test_objagg.o -obj-$(CONFIG_TEST_BLACKHOLE_DEV) += test_blackhole_dev.o obj-$(CONFIG_TEST_MEMINIT) += test_meminit.o obj-$(CONFIG_TEST_LOCKUP) += test_lockup.o obj-$(CONFIG_TEST_HMM) += test_hmm.o @@ -393,6 +392,7 @@ obj-$(CONFIG_FORTIFY_KUNIT_TEST) += fortify_kunit.o obj-$(CONFIG_CRC_KUNIT_TEST) += crc_kunit.o obj-$(CONFIG_SIPHASH_KUNIT_TEST) += siphash_kunit.o obj-$(CONFIG_USERCOPY_KUNIT_TEST) += usercopy_kunit.o +obj-$(CONFIG_BLACKHOLE_DEV_KUNIT_TEST) += blackhole_dev_kunit.o obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o diff --git a/lib/test_blackhole_dev.c b/lib/blackhole_dev_kunit.c similarity index 70% rename from lib/test_blackhole_dev.c rename to lib/blackhole_dev_kunit.c index ec290ac2a0d9..f8f5184d5b43 100644 --- a/lib/test_blackhole_dev.c +++ b/lib/blackhole_dev_kunit.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * This module tests the blackhole_dev that is created during the + * This tests the blackhole_dev that is created during the * net subsystem initialization. The test this module performs is * by injecting an skb into the stack with skb->dev as the * blackhole_dev and expects kernel to behave in a sane manner @@ -9,9 +9,8 @@ * Copyright (c) 2018, Mahesh Bandewar <maheshb(a)google.com> */ -#include <linux/init.h> +#include <kunit/test.h> #include <linux/module.h> -#include <linux/printk.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/udp.h> @@ -25,17 +24,15 @@ #define UDP_PORT 1234 -static int __init test_blackholedev_init(void) +static void test_blackholedev(struct kunit *test) { struct ipv6hdr *ip6h; struct sk_buff *skb; struct udphdr *uh; int data_len; - int ret; skb = alloc_skb(SKB_SIZE, GFP_KERNEL); - if (!skb) - return -ENOMEM; + KUNIT_ASSERT_NOT_NULL(test, skb); /* Reserve head-room for the headers */ skb_reserve(skb, HEAD_SIZE); @@ -68,32 +65,20 @@ static int __init test_blackholedev_init(void) skb->dev = blackhole_netdev; /* Now attempt to send the packet */ - ret = dev_queue_xmit(skb); - - switch (ret) { - case NET_XMIT_SUCCESS: - pr_warn("dev_queue_xmit() returned NET_XMIT_SUCCESS\n"); - break; - case NET_XMIT_DROP: - pr_warn("dev_queue_xmit() returned NET_XMIT_DROP\n"); - break; - case NET_XMIT_CN: - pr_warn("dev_queue_xmit() returned NET_XMIT_CN\n"); - break; - default: - pr_err("dev_queue_xmit() returned UNKNOWN(%d)\n", ret); - } - - return 0; + KUNIT_EXPECT_EQ(test, dev_queue_xmit(skb), NET_XMIT_SUCCESS); } -static void __exit test_blackholedev_exit(void) -{ - pr_warn("test_blackholedev module terminating.\n"); -} +static struct kunit_case blackholedev_cases[] = { + KUNIT_CASE(test_blackholedev), + {}, +}; + +static struct kunit_suite blackholedev_suite = { + .name = "blackholedev", + .test_cases = blackholedev_cases, +}; -module_init(test_blackholedev_init); -module_exit(test_blackholedev_exit); +kunit_test_suite(blackholedev_suite); MODULE_AUTHOR("Mahesh Bandewar <maheshb(a)google.com>"); MODULE_DESCRIPTION("module test of the blackhole_dev"); diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 73ee88d6b043..afa4bcdc5833 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -7,7 +7,7 @@ CFLAGS += -I../../../../usr/include/ $(KHDR_INCLUDES) CFLAGS += -I../ TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh netdevice.sh \ - rtnetlink.sh xfrm_policy.sh test_blackhole_dev.sh + rtnetlink.sh xfrm_policy.sh TEST_PROGS += fib_tests.sh fib-onlink-tests.sh pmtu.sh udpgso.sh ip_defrag.sh TEST_PROGS += udpgso_bench.sh fib_rule_tests.sh msg_zerocopy.sh psock_snd.sh TEST_PROGS += udpgro_bench.sh udpgro.sh test_vxlan_under_vrf.sh reuseport_addr_any.sh diff --git a/tools/testing/selftests/net/test_blackhole_dev.sh b/tools/testing/selftests/net/test_blackhole_dev.sh deleted file mode 100755 index 3119b80e711f..000000000000 --- a/tools/testing/selftests/net/test_blackhole_dev.sh +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0 -# Runs blackhole-dev test using blackhole-dev kernel module - -if /sbin/modprobe -q test_blackhole_dev ; then - /sbin/modprobe -q -r test_blackhole_dev; - echo "test_blackhole_dev: ok"; -else - echo "test_blackhole_dev: [FAIL]"; - exit 1; -fi --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250207-blackholedev-kunit-convert-9a52a1a1a032 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

3
4
0 0

[RFC PATCH v1 0/1] refactor mseal_test

by jeffxu＠chromium.org

From: Jeff Xu <jeffxu(a)chromium.org> This change creates the initial version of memorysealing.c. The introduction of memorysealing.c, which replaces mseal_test.c and uses the kselftest_harness, aims to initiate a discussion on using the selftest harness for memory sealing tests. Upon approval of this approach, the migration of tests from mseal_test.c to memorysealing.c can be implemented in a step-by-step manner. This tests addresses following feedbacks from previous reviews: 1> Use kselftest_harness instead of custom macro, such as EXPECT_XX, ASSERT_XX, etc. (Lorenzo Stoakes, Mark Brown, etc) [1] 2> Use MAP_FAILED to check the return of mmap (Lorenzo Stoakes). 3> Adding a check for vma size and prot bits. The discussion for this can be found in [2] [3], here is a brief summary: This is to follow up on Pedro’s in-loop change (from can_modify_mm to can_modify_vma). When mseal_test is initially created, they have a common pattern: setup memory layout, seal the memory, perform a few mm-api steps, verify return code (not zero). Because of the nature of out-of-loop, it is sufficient to just verify the error code in a few cases. With Pedro's in-loop change, the sealing check happens later in the stack, thus there are more things and scenarios to verify. And there were feedbacks to me that mseal_test should be extensive enough to discover all regressions. Hence I'm adding check for vma size and prot bits. In this change: we created two fixtures: Fixture basic: This creates a single VMA, the VMA has a PROT_NONE page at each end to prevent auto-merging. Fixture wo_vma: Two VMAs back to end, a PROT_NONE page at each end to prevent auto-merging. In addition, I add one test (mprotec) in each fixture for discussion. [1] https://lore.kernel.org/all/20240830180237.1220027-5-jeffxu@chromium.org/ [2] https://lore.kernel.org/all/CABi2SkUgDZtJtRJe+J9UNdtZn=EQzZcbMB685P=1rR7DUh… [3] https://lore.kernel.org/all/2qywbjb5ebtgwkh354w3lj3vhaothvubjokxq5fhyri5jee… Jeff Xu (1): selftest/mm: refactor mseal_test tools/testing/selftests/mm/.gitignore | 1 + tools/testing/selftests/mm/Makefile | 1 + tools/testing/selftests/mm/memorysealing.c | 182 +++++++++++++++++++++ tools/testing/selftests/mm/memorysealing.h | 116 +++++++++++++ tools/testing/selftests/mm/mseal_test.c | 67 +------- 5 files changed, 301 insertions(+), 66 deletions(-) create mode 100644 tools/testing/selftests/mm/memorysealing.c create mode 100644 tools/testing/selftests/mm/memorysealing.h -- 2.47.1.613.gc27f4b7a9f-goog

2 months, 2 weeks

3
5
0 0

[PATCH v1] kbuild: Allow building of samples with UML

by Mickaël Salaün

It's useful to build samples/* with UML and the only blocker is the artificial incompatibility with CONFIG_HEADERS_INSTALL. Allow the headers_install target with ARCH=um, which then allow building samples (and tests using them) with UML too: printf 'CONFIG_SAMPLES=y\nCONFIG_HEADERS_INSTALL=y\nCONFIG_SAMPLE_LANDLOCK=y\n' >.config make ARCH=um olddefconfig headers_install make ARCH=um samples/landlock/ Cc: Anton Ivanov <anton.ivanov(a)cambridgegreys.com> Cc: Johannes Berg <johannes(a)sipsolutions.net> Cc: Masahiro Yamada <masahiroy(a)kernel.org> Cc: Nathan Chancellor <nathan(a)kernel.org> Cc: Nicolas Schier <nicolas(a)fjasle.eu> Cc: Richard Weinberger <richard(a)nod.at> Fixes: 1b620d539ccc ("kbuild: disable header exports for UML in a straightforward way") Signed-off-by: Mickaël Salaün <mic(a)digikod.net> --- Makefile | 1 - lib/Kconfig.debug | 1 - 2 files changed, 2 deletions(-) diff --git a/Makefile b/Makefile index e5b8a8832c0c..6e2cce16a2a3 100644 --- a/Makefile +++ b/Makefile @@ -1355,7 +1355,6 @@ hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj PHONY += headers headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts - $(if $(filter um, $(SRCARCH)), $(error Headers not exportable for UML)) $(Q)$(MAKE) $(hdr-inst)=include/uapi $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index f3d723705879..fac1208f48e4 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -473,7 +473,6 @@ config READABLE_ASM config HEADERS_INSTALL bool "Install uapi headers to usr/include" - depends on !UML help This option will install uapi headers (headers exported to user-space) into the usr/include directory for use during the kernel build. -- 2.47.1

2 months, 2 weeks

4
3
0 0

[PATCH net-next, v8 1/2] netlink: support dumping IPv4 multicast addresses

by Yuyang Huang

Extended RTM_GETMULTICAST to support dumping joined IPv4 multicast addresses, in addition to the existing IPv6 functionality. This allows userspace applications to retrieve both IPv4 and IPv6 multicast addresses through similar netlink command and then monitor future changes by registering to RTNLGRP_IPV4_MCADDR and RTNLGRP_IPV6_MCADDR. Cc: Maciej Żenczykowski <maze(a)google.com> Cc: Lorenzo Colitti <lorenzo(a)google.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: Yuyang Huang <yuyanghuang(a)google.com> --- Changelog since v7: - Move igmp_internal.h to net/ipv4. Changelog since v6: - Move `inet_fill_args` and `inet_fill_ifmcaddr` from igmp.h to igmp_internal.h to avoid exposing these two definitions kernel wide. Changelog since v5: - Move the test case to a separate patch. - Refactor the code to remove the dependency on `enum addr_type_t type`. - Return error if `fillargs->event` is not set properly. - Return -EINVAL in an unreachable code path. Changelog since v4: - Fixes a bug where fillargs->event was not initialized in the code path for dumping ifaddr. - Fixes a bug where reply messages contain the wrong sequence number. - Minor style fixes. - Adds a ynl selftest. Changelog since v3: - Refactor in_dev_dump_addr() to break down the logic into two separate functions to simplify the logic. Changelog since v2: - Fix checkpatch.pl warnings. - Remove one redundant EXPORT_SYMBOL(). Changelog since v1: - Minor style fixes. - Use for_each_pmc_rcu() instead of for_each_pmc_rtnl(). net/ipv4/devinet.c | 77 ++++++++++++++++++++++++++++++++-------- net/ipv4/igmp.c | 14 +++++--- net/ipv4/igmp_internal.h | 17 +++++++++ 3 files changed, 90 insertions(+), 18 deletions(-) create mode 100644 net/ipv4/igmp_internal.h diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index c8b3cf5fba4c..f51e026d7a84 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -46,6 +46,7 @@ #include <linux/notifier.h> #include <linux/inetdevice.h> #include <linux/igmp.h> +#include "igmp_internal.h" #include <linux/slab.h> #include <linux/hash.h> #ifdef CONFIG_SYSCTL @@ -107,15 +108,6 @@ static const struct nla_policy ifa_ipv4_policy[IFA_MAX+1] = { [IFA_PROTO] = { .type = NLA_U8 }, }; -struct inet_fill_args { - u32 portid; - u32 seq; - int event; - unsigned int flags; - int netnsid; - int ifindex; -}; - #define IN4_ADDR_HSIZE_SHIFT 8 #define IN4_ADDR_HSIZE (1U << IN4_ADDR_HSIZE_SHIFT) @@ -1846,9 +1838,38 @@ static int inet_valid_dump_ifaddr_req(const struct nlmsghdr *nlh, return 0; } -static int in_dev_dump_addr(struct in_device *in_dev, struct sk_buff *skb, - struct netlink_callback *cb, int *s_ip_idx, - struct inet_fill_args *fillargs) +static int in_dev_dump_ifmcaddr(struct in_device *in_dev, struct sk_buff *skb, + struct netlink_callback *cb, int *s_ip_idx, + struct inet_fill_args *fillargs) +{ + struct ip_mc_list *im; + int ip_idx = 0; + int err; + + for (im = rcu_dereference(in_dev->mc_list); + im; + im = rcu_dereference(im->next_rcu)) { + if (ip_idx < *s_ip_idx) { + ip_idx++; + continue; + } + err = inet_fill_ifmcaddr(skb, in_dev->dev, im, fillargs); + if (err < 0) + goto done; + + nl_dump_check_consistent(cb, nlmsg_hdr(skb)); + ip_idx++; + } + err = 0; + ip_idx = 0; +done: + *s_ip_idx = ip_idx; + return err; +} + +static int in_dev_dump_ifaddr(struct in_device *in_dev, struct sk_buff *skb, + struct netlink_callback *cb, int *s_ip_idx, + struct inet_fill_args *fillargs) { struct in_ifaddr *ifa; int ip_idx = 0; @@ -1874,6 +1895,21 @@ static int in_dev_dump_addr(struct in_device *in_dev, struct sk_buff *skb, return err; } +static int in_dev_dump_addr(struct in_device *in_dev, struct sk_buff *skb, + struct netlink_callback *cb, int *s_ip_idx, + struct inet_fill_args *fillargs) +{ + switch (fillargs->event) { + case RTM_NEWADDR: + return in_dev_dump_ifaddr(in_dev, skb, cb, s_ip_idx, fillargs); + case RTM_GETMULTICAST: + return in_dev_dump_ifmcaddr(in_dev, skb, cb, s_ip_idx, + fillargs); + default: + return -EINVAL; + } +} + /* Combine dev_addr_genid and dev_base_seq to detect changes. */ static u32 inet_base_seq(const struct net *net) @@ -1889,13 +1925,14 @@ static u32 inet_base_seq(const struct net *net) return res; } -static int inet_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb) +static int inet_dump_addr(struct sk_buff *skb, struct netlink_callback *cb, + int event) { const struct nlmsghdr *nlh = cb->nlh; struct inet_fill_args fillargs = { .portid = NETLINK_CB(cb->skb).portid, .seq = nlh->nlmsg_seq, - .event = RTM_NEWADDR, + .event = event, .flags = NLM_F_MULTI, .netnsid = -1, }; @@ -1949,6 +1986,16 @@ static int inet_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb) return err; } +static int inet_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb) +{ + return inet_dump_addr(skb, cb, RTM_NEWADDR); +} + +static int inet_dump_ifmcaddr(struct sk_buff *skb, struct netlink_callback *cb) +{ + return inet_dump_addr(skb, cb, RTM_GETMULTICAST); +} + static void rtmsg_ifa(int event, struct in_ifaddr *ifa, struct nlmsghdr *nlh, u32 portid) { @@ -2845,6 +2892,8 @@ static const struct rtnl_msg_handler devinet_rtnl_msg_handlers[] __initconst = { {.protocol = PF_INET, .msgtype = RTM_GETNETCONF, .doit = inet_netconf_get_devconf, .dumpit = inet_netconf_dump_devconf, .flags = RTNL_FLAG_DOIT_UNLOCKED | RTNL_FLAG_DUMP_UNLOCKED}, + {.owner = THIS_MODULE, .protocol = PF_INET, .msgtype = RTM_GETMULTICAST, + .dumpit = inet_dump_ifmcaddr, .flags = RTNL_FLAG_DUMP_UNLOCKED}, }; void __init devinet_init(void) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 3da126cea884..2c394c364cb9 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -81,6 +81,7 @@ #include <linux/skbuff.h> #include <linux/inetdevice.h> #include <linux/igmp.h> +#include "igmp_internal.h" #include <linux/if_arp.h> #include <linux/rtnetlink.h> #include <linux/times.h> @@ -1432,14 +1433,16 @@ static void ip_mc_hash_remove(struct in_device *in_dev, *mc_hash = im->next_hash; } -static int inet_fill_ifmcaddr(struct sk_buff *skb, struct net_device *dev, - const struct ip_mc_list *im, int event) +int inet_fill_ifmcaddr(struct sk_buff *skb, struct net_device *dev, + const struct ip_mc_list *im, + struct inet_fill_args *args) { struct ifa_cacheinfo ci; struct ifaddrmsg *ifm; struct nlmsghdr *nlh; - nlh = nlmsg_put(skb, 0, 0, event, sizeof(struct ifaddrmsg), 0); + nlh = nlmsg_put(skb, args->portid, args->seq, args->event, + sizeof(struct ifaddrmsg), args->flags); if (!nlh) return -EMSGSIZE; @@ -1468,6 +1471,9 @@ static int inet_fill_ifmcaddr(struct sk_buff *skb, struct net_device *dev, static void inet_ifmcaddr_notify(struct net_device *dev, const struct ip_mc_list *im, int event) { + struct inet_fill_args fillargs = { + .event = event, + }; struct net *net = dev_net(dev); struct sk_buff *skb; int err = -ENOMEM; @@ -1479,7 +1485,7 @@ static void inet_ifmcaddr_notify(struct net_device *dev, if (!skb) goto error; - err = inet_fill_ifmcaddr(skb, dev, im, event); + err = inet_fill_ifmcaddr(skb, dev, im, &fillargs); if (err < 0) { WARN_ON_ONCE(err == -EMSGSIZE); nlmsg_free(skb); diff --git a/net/ipv4/igmp_internal.h b/net/ipv4/igmp_internal.h new file mode 100644 index 000000000000..0a1bcc8ec8e1 --- /dev/null +++ b/net/ipv4/igmp_internal.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _LINUX_IGMP_INTERNAL_H +#define _LINUX_IGMP_INTERNAL_H + +struct inet_fill_args { + u32 portid; + u32 seq; + int event; + unsigned int flags; + int netnsid; + int ifindex; +}; + +int inet_fill_ifmcaddr(struct sk_buff *skb, struct net_device *dev, + const struct ip_mc_list *im, + struct inet_fill_args *args); +#endif -- 2.48.1.502.g6dc24dfdaf-goog

2 months, 2 weeks

3
5
0 0

[PATCH net-next v4 00/17] Some pktgen fixes/improvments

by Peter Seiderer

hile taking a look at '[PATCH net] pktgen: Avoid out-of-range in get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds access in get_imix_entries' ([2], [3]) and doing some tests and code review I detected that the /proc/net/pktgen/... parsing logic does not honour the user given buffer bounds (resulting in out-of-bounds access). This can be observed e.g. by the following simple test (sometimes the old/'longer' previous value is re-read from the buffer): $ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0 $ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 123 max_pkt_size: 0 Result: OK: min_pkt_size=123 So fix the out-of-bounds access (and some minor findings) and add a simple proc_net_pktgen selftest... Regards, Peter Changes v3 -> v4: - add rev-by Simon Horman - new patch 'net: pktgen: use defines for the various dec/hex number parsing digits lengths' (suggested by Simon Horman) - replace C99 comment (suggested by Paolo Abeni) - drop available characters check in strn_len() (suggested by Paolo Abeni) - factored out patch 'net: pktgen: align some variable declarations to the most common pattern' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: remove extra tmp variable (re-use len instead)' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: remove some superfluous variable initializing' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: fix mpls maximum labels list parsing' (suggested by Paolo Abeni) - factored out 'net: pktgen: hex32_arg/num_arg error out in case no characters are available' (suggested by Paolo Abeni) - factored out 'net: pktgen: num_arg error out in case no valid character is parsed' (suggested by Paolo Abeni) Changes v2 -> v3: - new patch: 'net: pktgen: fix ctrl interface command parsing' - new patch: 'net: pktgen: fix mpls reset parsing' - tools/testing/selftests/net/proc_net_pktgen.c: - fix typo in change description ('v1 -> v1' and tyop) - rename some vars to better match usage add_loopback_0 -> thr_cmd_add_loopback_0 rm_loopback_0 -> thr_cmd_rm_loopback_0 wrong_ctrl_cmd -> wrong_thr_cmd legacy_ctrl_cmd -> legacy_thr_cmd ctrl_fd -> thr_fd - add ctrl interface tests Changes v1 -> v2: - new patch: 'net: pktgen: fix hex32_arg parsing for short reads' - new patch: 'net: pktgen: fix 'rate 0' error handling (return -EINVAL)' - new patch: 'net: pktgen: fix 'ratep 0' error handling (return -EINVAL)' - net/core/pktgen.c: additional fix get_imix_entries() and get_labels() - tools/testing/selftests/net/proc_net_pktgen.c: - fix tyop not vs. nod (suggested by Jakub Kicinski) - fix misaligned line (suggested by Jakub Kicinski) - enable fomerly commented out CONFIG_XFRM dependent test (command spi), as CONFIG_XFRM is enabled via tools/testing/selftests/net/config CONFIG_XFRM_INTERFACE/CONFIG_XFRM_USER (suggestex by Jakub Kicinski) - add CONFIG_NET_PKTGEN=m to tools/testing/selftests/net/config (suggested by Jakub Kicinski) - add modprobe pktgen to FIXTURE_SETUP() (suggested by Jakub Kicinski) - fix some checkpatch warnings (Missing a blank line after declarations) - shrink line length by re-naming some variables (command -> cmd, device -> dev) - add 'rate 0' testcase - add 'ratep 0' testcase [1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@re… [2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/ [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Peter Seiderer (17): net: pktgen: replace ENOTSUPP with EOPNOTSUPP net: pktgen: enable 'param=value' parsing net: pktgen: fix hex32_arg parsing for short reads net: pktgen: fix 'rate 0' error handling (return -EINVAL) net: pktgen: fix 'ratep 0' error handling (return -EINVAL) net: pktgen: fix ctrl interface command parsing net: pktgen: fix access outside of user given buffer in pktgen_thread_write() net: pktgen: use defines for the various dec/hex number parsing digits lengths net: pktgen: align some variable declarations to the most common pattern net: pktgen: remove extra tmp variable (re-use len instead) net: pktgen: remove some superfluous variable initializing net: pktgen: fix mpls maximum labels list parsing net: pktgen: fix access outside of user given buffer in pktgen_if_write() net: pktgen: hex32_arg/num_arg error out in case no characters are available net: pktgen: num_arg error out in case no valid character is parsed net: pktgen: fix mpls reset parsing selftest: net: add proc_net_pktgen net/core/pktgen.c | 268 +++++--- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 1 + tools/testing/selftests/net/proc_net_pktgen.c | 650 ++++++++++++++++++ 4 files changed, 828 insertions(+), 92 deletions(-) create mode 100644 tools/testing/selftests/net/proc_net_pktgen.c -- 2.48.1

2 months, 2 weeks

2
28
0 0

[PATCH net-next 1/2] selftests: drv-net: factor out a DrvEnv base class

by Jakub Kicinski

We have separate Env classes for local tests and tests with a remote endpoint. Make it easier to share the code by creating a base class. Make env loading a method of this class. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- .../selftests/drivers/net/lib/py/env.py | 59 +++++++++++-------- 1 file changed, 33 insertions(+), 26 deletions(-) diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py index 987e452d3a45..2f17880e411d 100644 --- a/tools/testing/selftests/drivers/net/lib/py/env.py +++ b/tools/testing/selftests/drivers/net/lib/py/env.py @@ -10,38 +10,46 @@ from lib.py import NetNS, NetdevSimDev from .remote import Remote -def _load_env_file(src_path): - env = os.environ.copy() +class NetDrvEnvBase: + """ + Base class for a NIC / host envirnoments + """ + def __init__(self, src_path): + self.src_path = src_path + self.env = self._load_env_file() - src_dir = Path(src_path).parent.resolve() - if not (src_dir / "net.config").exists(): + def _load_env_file(self): + env = os.environ.copy() + + src_dir = Path(self.src_path).parent.resolve() + if not (src_dir / "net.config").exists(): + return ksft_setup(env) + + with open((src_dir / "net.config").as_posix(), 'r') as fp: + for line in fp.readlines(): + full_file = line + # Strip comments + pos = line.find("#") + if pos >= 0: + line = line[:pos] + line = line.strip() + if not line: + continue + pair = line.split('=', maxsplit=1) + if len(pair) != 2: + raise Exception("Can't parse configuration line:", full_file) + env[pair[0]] = pair[1] return ksft_setup(env) - with open((src_dir / "net.config").as_posix(), 'r') as fp: - for line in fp.readlines(): - full_file = line - # Strip comments - pos = line.find("#") - if pos >= 0: - line = line[:pos] - line = line.strip() - if not line: - continue - pair = line.split('=', maxsplit=1) - if len(pair) != 2: - raise Exception("Can't parse configuration line:", full_file) - env[pair[0]] = pair[1] - return ksft_setup(env) - -class NetDrvEnv: +class NetDrvEnv(NetDrvEnvBase): """ Class for a single NIC / host env, with no remote end """ def __init__(self, src_path, **kwargs): - self._ns = None + super().__init__(src_path) - self.env = _load_env_file(src_path) + self._ns = None if 'NETIF' in self.env: self.dev = ip("link show dev " + self.env['NETIF'], json=True)[0] @@ -68,7 +76,7 @@ from .remote import Remote self._ns = None -class NetDrvEpEnv: +class NetDrvEpEnv(NetDrvEnvBase): """ Class for an environment with a local device and "remote endpoint" which can be used to send traffic in. @@ -82,8 +90,7 @@ from .remote import Remote nsim_v6_pfx = "2001:db8::" def __init__(self, src_path, nsim_test=None): - - self.env = _load_env_file(src_path) + super().__init__(src_path) self._stats_settle_time = None -- 2.48.1

2 months, 2 weeks

3
4
0 0

[PATCH net-next] selftests: drv-net: remove an unnecessary libmnl include

by Jakub Kicinski

ncdevmem doesn't need libmnl, remove the unnecessary include. Since YNL doesn't depend on libmnl either, any more, it's actually possible to build selftests without having libmnl installed. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: almasrymina(a)google.com CC: sdf(a)fomichev.me CC: jdamato(a)fastly.com CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/drivers/net/hw/ncdevmem.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/drivers/net/hw/ncdevmem.c b/tools/testing/selftests/drivers/net/hw/ncdevmem.c index 19a6969643f4..2bf14ac2b8c6 100644 --- a/tools/testing/selftests/drivers/net/hw/ncdevmem.c +++ b/tools/testing/selftests/drivers/net/hw/ncdevmem.c @@ -50,7 +50,6 @@ #include <linux/memfd.h> #include <linux/dma-buf.h> #include <linux/udmabuf.h> -#include <libmnl/libmnl.h> #include <linux/types.h> #include <linux/netlink.h> #include <linux/genetlink.h> -- 2.48.1

2 months, 2 weeks

4
3
0 0

[PATCH net-next v6 0/7] tun: Unify vnet implementation

by Akihiko Odaki

When I implemented virtio's hash-related features to tun/tap [1], I found tun/tap does not fill the entire region reserved for the virtio header, leaving some uninitialized hole in the middle of the buffer after read()/recvmesg(). This series fills the uninitialized hole. More concretely, the num_buffers field will be initialized with 1, and the other fields will be inialized with 0. Setting the num_buffers field to 1 is mandated by virtio 1.0 [2]. The change to virtio header is preceded by another change that refactors tun and tap to unify their virtio-related code. [1]: https://lore.kernel.org/r/20241008-rss-v5-0-f3cf68df005d@daynix.com [2]: https://lore.kernel.org/r/20241227084256-mutt-send-email-mst@kernel.org/ Signed-off-by: Akihiko Odaki <akihiko.odaki(a)daynix.com> --- Changes in v6: - Added an intermediate variable in tun_vnet_legacy_is_little_endian() to reduce a complexity of an expression. - Noted that functions are renamed in the message of patch "tun: Extract the vnet handling code". - Used clamp() in patch "tap: Keep hdr_len in tap_get_user()". - Link to v5: https://lore.kernel.org/r/20250205-tun-v5-0-15d0b32e87fa@daynix.com Changes in v5: - s/vnet_hdr_len_sz/vnet_hdr_sz/ for patch "tun: Decouple vnet handling" (Willem de Bruijn) - Changed to inline vnet implementations to TUN and TAP. - Dropped patch "tun: Avoid double-tracking iov_iter length changes" and "tap: Avoid double-tracking iov_iter length changes". - Link to v4: https://lore.kernel.org/r/20250120-tun-v4-0-ee81dda03d7f@daynix.com Changes in v4: - s/sz/vnet_hdr_len_sz/ for patch "tun: Decouple vnet handling" (Willem de Bruijn) - Reverted to add CONFIG_TUN_VNET. - Link to v3: https://lore.kernel.org/r/20250116-tun-v3-0-c6b2871e97f7@daynix.com Changes in v3: - Dropped changes to fill the vnet header. - Splitted patch "tun: Unify vnet implementation". - Reverted spurious changes in patch "tun: Unify vnet implementation". - Merged tun_vnet.c into TAP. - Link to v2: https://lore.kernel.org/r/20250109-tun-v2-0-388d7d5a287a@daynix.com Changes in v2: - Fixed num_buffers endian. - Link to v1: https://lore.kernel.org/r/20250108-tun-v1-0-67d784b34374@daynix.com --- Akihiko Odaki (7): tun: Refactor CONFIG_TUN_VNET_CROSS_LE tun: Keep hdr_len in tun_get_user() tun: Decouple vnet from tun_struct tun: Decouple vnet handling tun: Extract the vnet handling code tap: Keep hdr_len in tap_get_user() tap: Use tun's vnet-related code MAINTAINERS | 2 +- drivers/net/tap.c | 166 +++++------------------------------------- drivers/net/tun.c | 193 ++++++------------------------------------------- drivers/net/tun_vnet.h | 185 +++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 229 insertions(+), 317 deletions(-) --- base-commit: a32e14f8aef69b42826cf0998b068a43d486a9e9 change-id: 20241230-tun-66e10a49b0c7 Best regards, -- Akihiko Odaki <akihiko.odaki(a)daynix.com>

2 months, 2 weeks

3
10
0 0

[PATCH v2 RESEND] selftests: tpm2: test_smoke: use POSIX-conformant expression operator

by Ahmed Salem

Use POSIX-conformant operator symbol '=='. Signed-off-by: Ahmed Salem <x0rw3ll(a)gmail.com> --- Changes in v2: - Remove snippets pinpointing the issue from commit message tools/testing/selftests/tpm2/test_smoke.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh index 168f4b166234..3a60e6c6f5c9 100755 --- a/tools/testing/selftests/tpm2/test_smoke.sh +++ b/tools/testing/selftests/tpm2/test_smoke.sh @@ -6,6 +6,6 @@ ksft_skip=4 [ -e /dev/tpm0 ] || exit $ksft_skip read tpm_version < /sys/class/tpm/tpm0/tpm_version_major -[ "$tpm_version" == 2 ] || exit $ksft_skip +[ "$tpm_version" = 2 ] || exit $ksft_skip python3 -m unittest -v tpm2_tests.SmokeTest 2>&1 -- 2.47.2

2 months, 2 weeks

1
0
0 0

[PATCH AUTOSEL 6.12 19/19] selftests: always check mask returned by statmount(2)

by Sasha Levin

From: Miklos Szeredi <mszeredi(a)redhat.com> [ Upstream commit 2cc02059fbc79306b53a44b1f1a4444aa3c76598 ] STATMOUNT_MNT_OPTS can actually be missing if there are no options. This is a change of behavior since 75ead69a7173 ("fs: don't let statmount return empty strings"). The other checks shouldn't actually trigger, but add them for correctness and for easier debugging if the test fails. Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> Link: https://lore.kernel.org/r/20250129160641.35485-1-mszeredi@redhat.com Signed-off-by: Christian Brauner <brauner(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../filesystems/statmount/statmount_test.c | 22 ++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/filesystems/statmount/statmount_test.c b/tools/testing/selftests/filesystems/statmount/statmount_test.c index c773334bbcc95..550e5d762c23f 100644 --- a/tools/testing/selftests/filesystems/statmount/statmount_test.c +++ b/tools/testing/selftests/filesystems/statmount/statmount_test.c @@ -383,6 +383,10 @@ static void test_statmount_mnt_point(void) return; } + if (!(sm->mask & STATMOUNT_MNT_POINT)) { + ksft_test_result_fail("missing STATMOUNT_MNT_POINT in mask\n"); + return; + } if (strcmp(sm->str + sm->mnt_point, "/") != 0) { ksft_test_result_fail("unexpected mount point: '%s' != '/'\n", sm->str + sm->mnt_point); @@ -408,6 +412,10 @@ static void test_statmount_mnt_root(void) strerror(errno)); return; } + if (!(sm->mask & STATMOUNT_MNT_ROOT)) { + ksft_test_result_fail("missing STATMOUNT_MNT_ROOT in mask\n"); + return; + } mnt_root = sm->str + sm->mnt_root; last_root = strrchr(mnt_root, '/'); if (last_root) @@ -437,6 +445,10 @@ static void test_statmount_fs_type(void) strerror(errno)); return; } + if (!(sm->mask & STATMOUNT_FS_TYPE)) { + ksft_test_result_fail("missing STATMOUNT_FS_TYPE in mask\n"); + return; + } fs_type = sm->str + sm->fs_type; for (s = known_fs; s != NULL; s++) { if (strcmp(fs_type, *s) == 0) @@ -464,6 +476,11 @@ static void test_statmount_mnt_opts(void) return; } + if (!(sm->mask & STATMOUNT_MNT_BASIC)) { + ksft_test_result_fail("missing STATMOUNT_MNT_BASIC in mask\n"); + return; + } + while (getline(&line, &len, f_mountinfo) != -1) { int i; char *p, *p2; @@ -514,7 +531,10 @@ static void test_statmount_mnt_opts(void) if (p2) *p2 = '\0'; - statmount_opts = sm->str + sm->mnt_opts; + if (sm->mask & STATMOUNT_MNT_OPTS) + statmount_opts = sm->str + sm->mnt_opts; + else + statmount_opts = ""; if (strcmp(statmount_opts, p) != 0) ksft_test_result_fail( "unexpected mount options: '%s' != '%s'\n", -- 2.39.5

2 months, 2 weeks

1
0
0 0

[PATCH AUTOSEL 6.13 21/21] selftests: always check mask returned by statmount(2)

by Sasha Levin

From: Miklos Szeredi <mszeredi(a)redhat.com> [ Upstream commit 2cc02059fbc79306b53a44b1f1a4444aa3c76598 ] STATMOUNT_MNT_OPTS can actually be missing if there are no options. This is a change of behavior since 75ead69a7173 ("fs: don't let statmount return empty strings"). The other checks shouldn't actually trigger, but add them for correctness and for easier debugging if the test fails. Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> Link: https://lore.kernel.org/r/20250129160641.35485-1-mszeredi@redhat.com Signed-off-by: Christian Brauner <brauner(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../filesystems/statmount/statmount_test.c | 22 ++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/filesystems/statmount/statmount_test.c b/tools/testing/selftests/filesystems/statmount/statmount_test.c index 8eb6aa606a0d5..46d289611ce86 100644 --- a/tools/testing/selftests/filesystems/statmount/statmount_test.c +++ b/tools/testing/selftests/filesystems/statmount/statmount_test.c @@ -383,6 +383,10 @@ static void test_statmount_mnt_point(void) return; } + if (!(sm->mask & STATMOUNT_MNT_POINT)) { + ksft_test_result_fail("missing STATMOUNT_MNT_POINT in mask\n"); + return; + } if (strcmp(sm->str + sm->mnt_point, "/") != 0) { ksft_test_result_fail("unexpected mount point: '%s' != '/'\n", sm->str + sm->mnt_point); @@ -408,6 +412,10 @@ static void test_statmount_mnt_root(void) strerror(errno)); return; } + if (!(sm->mask & STATMOUNT_MNT_ROOT)) { + ksft_test_result_fail("missing STATMOUNT_MNT_ROOT in mask\n"); + return; + } mnt_root = sm->str + sm->mnt_root; last_root = strrchr(mnt_root, '/'); if (last_root) @@ -437,6 +445,10 @@ static void test_statmount_fs_type(void) strerror(errno)); return; } + if (!(sm->mask & STATMOUNT_FS_TYPE)) { + ksft_test_result_fail("missing STATMOUNT_FS_TYPE in mask\n"); + return; + } fs_type = sm->str + sm->fs_type; for (s = known_fs; s != NULL; s++) { if (strcmp(fs_type, *s) == 0) @@ -464,6 +476,11 @@ static void test_statmount_mnt_opts(void) return; } + if (!(sm->mask & STATMOUNT_MNT_BASIC)) { + ksft_test_result_fail("missing STATMOUNT_MNT_BASIC in mask\n"); + return; + } + while (getline(&line, &len, f_mountinfo) != -1) { int i; char *p, *p2; @@ -514,7 +531,10 @@ static void test_statmount_mnt_opts(void) if (p2) *p2 = '\0'; - statmount_opts = sm->str + sm->mnt_opts; + if (sm->mask & STATMOUNT_MNT_OPTS) + statmount_opts = sm->str + sm->mnt_opts; + else + statmount_opts = ""; if (strcmp(statmount_opts, p) != 0) ksft_test_result_fail( "unexpected mount options: '%s' != '%s'\n", -- 2.39.5

2 months, 2 weeks

1
0
0 0

[PATCH] selftests: tpm2: test_smoke: use POSIX-conformant expression operator

by Ahmed Salem

test_smoke.sh:9: expression uses non POSIX-conformant operator symbol '==', resulting in skipping the remaining tests. This patch ensures the use of POSIX-conformant operator symbol '='. w/o this patch for test_smoke.sh ================================ $ sudo make -j8 TARGETS=tpm2 kselftest make[3]: Nothing to be done for 'all'. TAP version 13 1..3 # timeout set to 600 # selftests: tpm2: test_smoke.sh # ./test_smoke.sh: 9: [: 2: unexpected operator ok 1 selftests: tpm2: test_smoke.sh # SKIP # timeout set to 600 # selftests: tpm2: test_space.sh # test_flush_context (tpm2_tests.SpaceTest.test_flush_context) ... ok # test_get_handles (tpm2_tests.SpaceTest.test_get_handles) ... ok # test_invalid_cc (tpm2_tests.SpaceTest.test_invalid_cc) ... ok # test_make_two_spaces (tpm2_tests.SpaceTest.test_make_two_spaces) ... ok # # ---------------------------------------------------------------------- # Ran 4 tests in 8.647s # # OK ok 2 selftests: tpm2: test_space.sh # timeout set to 600 # selftests: tpm2: test_async.sh # test_async (tpm2_tests.AsyncTest.test_async) ... ok # test_flush_invalid_context (tpm2_tests.AsyncTest.test_flush_invalid_context) ... ok # # ---------------------------------------------------------------------- # Ran 2 tests in 0.005s # # OK ok 3 selftests: tpm2: test_async.sh with this patch for test_smoke.sh ================================= $ sudo make -j8 TARGETS=tpm2 kselftest make[3]: Nothing to be done for 'all'. TAP version 13 1..3 # timeout set to 600 # selftests: tpm2: test_smoke.sh # test_read_partial_overwrite (tpm2_tests.SmokeTest.test_read_partial_overwrite) ... ok # test_read_partial_resp (tpm2_tests.SmokeTest.test_read_partial_resp) ... ok # test_seal_with_auth (tpm2_tests.SmokeTest.test_seal_with_auth) ... ok # test_seal_with_policy (tpm2_tests.SmokeTest.test_seal_with_policy) ... ok # test_seal_with_too_long_auth (tpm2_tests.SmokeTest.test_seal_with_too_long_auth) ... ok # test_send_two_cmds (tpm2_tests.SmokeTest.test_send_two_cmds) ... ok # test_too_short_cmd (tpm2_tests.SmokeTest.test_too_short_cmd) ... ok # test_unseal_with_wrong_auth (tpm2_tests.SmokeTest.test_unseal_with_wrong_auth) ... ok # test_unseal_with_wrong_policy (tpm2_tests.SmokeTest.test_unseal_with_wrong_policy) ... ok # # ---------------------------------------------------------------------- # Ran 9 tests in 9.278s # # OK ok 1 selftests: tpm2: test_smoke.sh # timeout set to 600 # selftests: tpm2: test_space.sh # test_flush_context (tpm2_tests.SpaceTest.test_flush_context) ... ok # test_get_handles (tpm2_tests.SpaceTest.test_get_handles) ... ok # test_invalid_cc (tpm2_tests.SpaceTest.test_invalid_cc) ... ok # test_make_two_spaces (tpm2_tests.SpaceTest.test_make_two_spaces) ... ok # # ---------------------------------------------------------------------- # Ran 4 tests in 8.701s # # OK ok 2 selftests: tpm2: test_space.sh # timeout set to 600 # selftests: tpm2: test_async.sh # test_async (tpm2_tests.AsyncTest.test_async) ... ok # test_flush_invalid_context (tpm2_tests.AsyncTest.test_flush_invalid_context) ... ok # # ---------------------------------------------------------------------- # Ran 2 tests in 0.004s # # OK ok 3 selftests: tpm2: test_async.sh Signed-off-by: Ahmed Salem <x0rw3ll(a)gmail.com> --- tools/testing/selftests/tpm2/test_smoke.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh index 168f4b166234..3a60e6c6f5c9 100755 --- a/tools/testing/selftests/tpm2/test_smoke.sh +++ b/tools/testing/selftests/tpm2/test_smoke.sh @@ -6,6 +6,6 @@ ksft_skip=4 [ -e /dev/tpm0 ] || exit $ksft_skip read tpm_version < /sys/class/tpm/tpm0/tpm_version_major -[ "$tpm_version" == 2 ] || exit $ksft_skip +[ "$tpm_version" = 2 ] || exit $ksft_skip python3 -m unittest -v tpm2_tests.SmokeTest 2>&1 -- 2.47.2

2 months, 2 weeks

2
2
0 0

[PATCH net-next v5 0/8] netconsole: Add support for CPU population

by Breno Leitao

The current implementation of netconsole sends all log messages in parallel, which can lead to an intermixed and interleaved output on the receiving side. This makes it challenging to demultiplex the messages and attribute them to their originating CPUs. As a result, users and developers often struggle to effectively analyze and debug the parallel log output received through netconsole. Example of a message got from produciton hosts: ------------[ cut here ]------------ ------------[ cut here ]------------ refcount_t: saturated; leaking memory. WARNING: CPU: 2 PID: 1613668 at lib/refcount.c:22 refcount_warn_saturate+0x5e/0xe0 refcount_t: addition on 0; use-after-free. WARNING: CPU: 26 PID: 4139916 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0xe0 Modules linked in: bpf_preload(E) vhost_net(E) tun(E) vhost(E) This series of patches introduces a new feature to the netconsole subsystem that allows the automatic population of the CPU number in the userdata field for each log message. This enhancement provides several benefits: * Improved demultiplexing of parallel log output: When multiple CPUs are sending messages concurrently, the added CPU number in the userdata makes it easier to differentiate and attribute the messages to their originating CPUs. * Better visibility into message sources: The CPU number information gives users and developers more insight into which specific CPU a particular log message came from, which can be valuable for debugging and analysis. The changes in this series are as follows Patches:: Patch "consolidate send buffers into netconsole_target struct" ================================================= Move the static buffers to netconsole target, from static declaration in send_msg_no_fragmentation() and send_msg_fragmented(). Patch "netconsole: Rename userdata to extradata" ================================================= Create the a concept of extradata, which encompasses the concept of userdata and the upcoming sysdatao Sysdata is a new concept being added, which is basically fields that are populated by the kernel. At this time only the CPU#, but, there is a desire to add current task name, kernel release version, etc. Patch "netconsole: Helper to count number of used entries" =========================================================== Create a simple helper to count number of entries in extradata. I am separating this in a function since it will need to count userdata and sysdata. For instance, when the user adds an extra userdata, we need to check if there is space, counting the previous data entries (from userdata and cpu data) Patch "Introduce configfs helpers for sysdata features" ====================================================== Create the concept of sysdata feature in the netconsole target, and create the configfs helpers to enable the bit in nt->sysdata Patch "Include sysdata in extradata entry count" ================================================ Add the concept of sysdata when counting for available space in the buffer. This will protect users from creating new userdata/sysdata if there is no more space Patch "netconsole: add support for sysdata and CPU population" =============================================================== This is the core patch. Basically add a new option to enable automatic CPU number population in the netconsole userdata Provides a new "cpu_nr" sysfs attribute to control this feature Patch "netconsole: selftest: test CPU number auto-population" ============================================================= Expands the existing netconsole selftest to verify the CPU number auto-population functionality Ensures the received netconsole messages contain the expected "cpu=<CPU>" entry in the message. Test different permutation with userdata Patch "netconsole: docs: Add documentation for CPU number auto-population" ============================================================================= Updates the netconsole documentation to explain the new CPU number auto-population feature Provides instructions on how to enable and use the feature I believe these changes will be a valuable addition to the netconsole subsystem, enhancing its usefulness for kernel developers and users. PS: This patchset is on top of the patch that created netcons_fragmented_msg selftest: https://lore.kernel.org/all/20250203-netcons_frag_msgs-v1-1-5bc6bedf2ac0@de… Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Changes in v5: - Fixed a kernel doc syntax syntax (Simon) - Link to v4: https://lore.kernel.org/r/20250204-netcon_cpu-v4-0-9480266ef556@debian.org Changes in v4: - Fixed Kernel doc for netconsole_target (Simon) - Fixed a typo in disable_sysdata_feature (Simon) - Improved sysdata_cpu_nr_show() to return !! in a bit-wise operation - Link to v3: https://lore.kernel.org/r/20250124-netcon_cpu-v3-0-12a0d286ba1d@debian.org Changes in v3: - Moved the buffer into netconsole_target, avoiding static functions in the send path (Jakub). - Fix a documentation error (Randy Dunlap) - Created a function that handle all the extradata, consolidating it in a single place (Jakub) - Split the patch even more, trying to simplify the review. - Link to v2: https://lore.kernel.org/r/20250115-netcon_cpu-v2-0-95971b44dc56@debian.org Changes in v2: - Create the concept of extradata and sysdata. This will make the design easier to understand, and the code easier to read. * Basically extradata encompasses userdata and the new sysdata. Userdata originates from user, and sysdata originates in kernel. - Improved the test to send from a very specific CPU, which can be checked to be correct on the other side, as suggested by Jakub. - Fixed a bug where CPU # was populated at the wrong place - Link to v1: https://lore.kernel.org/r/20241113-netcon_cpu-v1-0-d187bf7c0321@debian.org --- Breno Leitao (8): netconsole: consolidate send buffers into netconsole_target struct netconsole: Rename userdata to extradata netconsole: Helper to count number of used entries netconsole: Introduce configfs helpers for sysdata features netconsole: Include sysdata in extradata entry count netconsole: add support for sysdata and CPU population netconsole: selftest: test for sysdata CPU netconsole: docs: Add documentation for CPU number auto-population Documentation/networking/netconsole.rst | 45 ++++ drivers/net/netconsole.c | 261 ++++++++++++++++----- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 17 ++ .../selftests/drivers/net/netcons_sysdata.sh | 167 +++++++++++++ 5 files changed, 427 insertions(+), 64 deletions(-) --- base-commit: 09717c28b76c30b1dc8c261c855ffb2406abab2e change-id: 20241108-netcon_cpu-ce3917e88f4b Best regards, -- Breno Leitao <leitao(a)debian.org>

2 months, 2 weeks

3
12
0 0

[RFC PATCH v2 0/4] PMU partitioning driver support

by Colton Lewis

This series introduces support in the ARM PMUv3 driver for partitioning PMU counters into two separate ranges by taking advantage of the MDCR_EL2.HPMN register field. The advantage of a partitioned PMU would be to allow KVM guests direct access to a subset of PMU functionality, greatly reducing the overhead of performance monitoring in guests. While this feature could be accepted on its own merits, practically there is a lot more to be done before it will be fully useful, so I'm sending as an RFC for now. v2: * Rebase to v6.14-rc1, and take into account Oliver's debug cleanup changing some KVM handling of MDCR_EL2. * Reorder patches to put related things closer together for easier reading. * Ensure driver compiles for 32-bit ARM by defining 32-bit access to MDCR_EL2 correctly, which is called HDCR there. These will not be called due to the below requirement for VHE mode but a functionally correct definition seemed preferable to making it a no op. * Rename parameter to reserved_host_counters to better reflect underlying hardware semantics and ensure host counters are easier to preserve. * Document parameter with MODULE_PARM_DESC * Restrict partitioning to VHE mode only. Using HPMN restricts the host counters to EL2 access only. Trying to make this work for the driver running at EL1 would require hypercalls for every access of those registers and a lot of additional handling at the KVM level. This would defeat the whole purpose of having the feature at all. Define has_vhe() on 32-bit arm to always return false. * While Rob asked about making the parameter configurable at run time rather than boot time through sysfs, that is potentially very tricky because it is only safe to reprogram HPMN when we are certain no one, host or guest, is using any counters that might change ownership. If this is determined to be worthwhile, it should come after getting the core infrastructure right. * While Marc asked about reusing the sysreg masks instead of redefining them for MDCR_EL2, that doesn't work because sysreg masks are only defined for arm64. I'm not sure how to avoid the duplication. * Wrap code for determining if a counter index belongs to the host or guest partition in functions * Typo fixes and additional testing v1: https://lore.kernel.org/kvm/20250127222031.3078945-1-coltonlewis@google.com/ Colton Lewis (4): perf: arm_pmuv3: Generalize counter bitmasks perf: arm_pmuv3: Introduce module param to partition the PMU perf: arm_pmuv3: Keep out of guest counter partition KVM: arm64: Make guests see only counters they can access arch/arm/include/asm/arm_pmuv3.h | 13 ++ arch/arm64/include/asm/arm_pmuv3.h | 10 ++ arch/arm64/kvm/debug.c | 3 +- arch/arm64/kvm/pmu-emul.c | 8 +- drivers/perf/arm_pmuv3.c | 117 ++++++++++++++++-- include/linux/perf/arm_pmu.h | 2 + include/linux/perf/arm_pmuv3.h | 34 ++++- .../selftests/kvm/arm64/vpmu_counter_access.c | 2 +- 8 files changed, 168 insertions(+), 21 deletions(-) base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b -- 2.48.1.502.g6dc24dfdaf-goog

2 months, 2 weeks

2
8
0 0

[PATCH RFC net-next v1 0/5] Device memory TCP TX

by Mina Almasry

The TX path had been dropped from the Device Memory TCP patch series post RFCv1 [1], to make that series slightly easier to review. This series rebases the implementation of the TX path on top of the net_iov/netmem framework agreed upon and merged. The motivation for the feature is thoroughly described in the docs & cover letter of the original proposal, so I don't repeat the lengthy descriptions here, but they are available in [1]. Sending this series as RFC as the winder closure is immenient. I plan on reposting as non-RFC once the tree re-opens, addressing any feedback I receive in the meantime. Full outline on usage of the TX path is detailed in the documentation added in the first patch. Test example is available via the kselftest included in the series as well. The series is relatively small, as the TX path for this feature largely piggybacks on the existing MSG_ZEROCOPY implementation. Patch Overview: --------------- 1. Documentation & tests to give high level overview of the feature being added. 2. Add netmem refcounting needed for the TX path. 3. Devmem TX netlink API. 4. Devmem TX net stack implementation. Testing: -------- Testing is very similar to devmem TCP RX path. The ncdevmem test used for the RX path is now augemented with client functionality to test TX path. * Test Setup: Kernel: net-next with this RFC and memory provider API cherry-picked locally. Hardware: Google Cloud A3 VMs. NIC: GVE with header split & RSS & flow steering support. Performance results are not included with this version, unfortunately. I'm having issues running the dma-buf exporter driver against the upstream kernel on my test setup. The issues are specific to that dma-buf exporter and do not affect this patch series. I plan to follow up this series with perf fixes if the tests point to issues once they're up and running. Special thanks to Stan who took a stab at rebasing the TX implementation on top of the netmem/net_iov framework merged. Parts of his proposal [2] that are reused as-is are forked off into their own patches to give full credit. [1] https://lore.kernel.org/netdev/20240909054318.1809580-1-almasrymina@google.… [2] https://lore.kernel.org/netdev/20240913150913.1280238-2-sdf@fomichev.me/T/#… Cc: sdf(a)fomichev.me Cc: asml.silence(a)gmail.com Cc: dw(a)davidwei.uk Mina Almasry (4): net: add devmem TCP TX documentation selftests: ncdevmem: Implement devmem TCP TX net: add get_netmem/put_netmem support net: devmem: Implement TX path Stanislav Fomichev (1): net: devmem TCP tx netlink api Documentation/netlink/specs/netdev.yaml | 12 + Documentation/networking/devmem.rst | 140 +++++++++- include/linux/skbuff.h | 13 +- include/linux/skbuff_ref.h | 4 +- include/net/netmem.h | 3 + include/net/sock.h | 2 + include/uapi/linux/netdev.h | 1 + include/uapi/linux/uio.h | 5 + net/core/datagram.c | 40 ++- net/core/devmem.c | 101 ++++++- net/core/devmem.h | 51 +++- net/core/netdev-genl-gen.c | 13 + net/core/netdev-genl-gen.h | 1 + net/core/netdev-genl.c | 67 ++++- net/core/skbuff.c | 38 ++- net/core/sock.c | 9 + net/ipv4/tcp.c | 36 ++- net/vmw_vsock/virtio_transport_common.c | 4 +- tools/include/uapi/linux/netdev.h | 1 + .../selftests/drivers/net/hw/ncdevmem.c | 261 +++++++++++++++++- 20 files changed, 764 insertions(+), 38 deletions(-) -- 2.47.1.613.gc27f4b7a9f-goog

2 months, 2 weeks

5
25
0 0

[PATCH v10 00/27] riscv control-flow integrity for usermode

by Deepak Gupta

Basics and overview =================== Software with larger attack surfaces (e.g. network facing apps like databases, browsers or apps relying on browser runtimes) suffer from memory corruption issues which can be utilized by attackers to bend control flow of the program to eventually gain control (by making their payload executable). Attackers are able to perform such attacks by leveraging call-sites which rely on indirect calls or return sites which rely on obtaining return address from stack memory. To mitigate such attacks, risc-v extension zicfilp enforces that all indirect calls must land on a landing pad instruction `lpad` else cpu will raise software check exception (a new cpu exception cause code on riscv). Similarly for return flow, risc-v extension zicfiss extends architecture with - `sspush` instruction to push return address on a shadow stack - `sspopchk` instruction to pop return address from shadow stack and compare with input operand (i.e. return address on stack) - `sspopchk` to raise software check exception if comparision above was a mismatch - Protection mechanism using which shadow stack is not writeable via regular store instructions More information an details can be found at extensions github repo [1]. Equivalent to landing pad (zicfilp) on x86 is `ENDBRANCH` instruction in Intel CET [3] and branch target identification (BTI) [4] on arm. Similarly x86's Intel CET has shadow stack [5] and arm64 has guarded control stack (GCS) [6] which are very similar to risc-v's zicfiss shadow stack. x86 and arm64 support for user mode shadow stack is already in mainline. Kernel awareness for user control flow integrity ================================================ This series picks up Samuel Holland's envcfg changes [2] as well. So if those are being applied independently, they should be removed from this series. Enabling: In order to maintain compatibility and not break anything in user mode, kernel doesn't enable control flow integrity cpu extensions on binary by default. Instead exposes a prctl interface to enable, disable and lock the shadow stack or landing pad feature for a task. This allows userspace (loader) to enumerate if all objects in its address space are compiled with shadow stack and landing pad support and accordingly enable the feature. Additionally if a subsequent `dlopen` happens on a library, user mode can take a decision again to disable the feature (if incoming library is not compiled with support) OR terminate the task (if user mode policy is strict to have all objects in address space to be compiled with control flow integirty cpu feature). prctl to enable shadow stack results in allocating shadow stack from virtual memory and activating for user address space. x86 and arm64 are also following same direction due to similar reason(s). clone/fork: On clone and fork, cfi state for task is inherited by child. Shadow stack is part of virtual memory and is a writeable memory from kernel perspective (writeable via a restricted set of instructions aka shadow stack instructions) Thus kernel changes ensure that this memory is converted into read-only when fork/clone happens and COWed when fault is taken due to sspush, sspopchk or ssamoswap. In case `CLONE_VM` is specified and shadow stack is to be enabled, kernel will automatically allocate a shadow stack for that clone call. map_shadow_stack: x86 introduced `map_shadow_stack` system call to allow user space to explicitly map shadow stack memory in its address space. It is useful to allocate shadow for different contexts managed by a single thread (green threads or contexts) risc-v implements this system call as well. signal management: If shadow stack is enabled for a task, kernel performs an asynchronous control flow diversion to deliver the signal and eventually expects userspace to issue sigreturn so that original execution can be resumed. Even though resume context is prepared by kernel, it is in user space memory and is subject to memory corruption and corruption bugs can be utilized by attacker in this race window to perform arbitrary sigreturn and eventually bypass cfi mechanism. Another issue is how to ensure that cfi related state on sigcontext area is not trampled by legacy apps or apps compiled with old kernel headers. In order to mitigate control-flow hijacting, kernel prepares a token and place it on shadow stack before signal delivery and places address of token in sigcontext structure. During sigreturn, kernel obtains address of token from sigcontext struture, reads token from shadow stack and validates it and only then allow sigreturn to succeed. Compatiblity issue is solved by adopting dynamic sigcontext management introduced for vector extension. This series re-factor the code little bit to allow future sigcontext management easy (as proposed by Andy Chiu from SiFive) config and compilation: Introduce a new risc-v config option `CONFIG_RISCV_USER_CFI`. Selecting this config option picks the kernel support for user control flow integrity. This optin is presented only if toolchain has shadow stack and landing pad support. And is on purpose guarded by toolchain support. Reason being that eventually vDSO also needs to be compiled in with shadow stack and landing pad support. vDSO compile patches are not included as of now because landing pad labeling scheme is yet to settle for usermode runtime. To get more information on kernel interactions with respect to zicfilp and zicfiss, patch series adds documentation for `zicfilp` and `zicfiss` in following: Documentation/arch/riscv/zicfiss.rst Documentation/arch/riscv/zicfilp.rst How to test this series ======================= Toolchain --------- $ git clone git@github.com:sifive/riscv-gnu-toolchain.git -b cfi-dev $ riscv-gnu-toolchain/configure --prefix=<path-to-where-to-build> --with-arch=rv64gc_zicfilp_zicfiss --enable-linux --disable-gdb --with-extra-multilib-test="rv64gc_zicfilp_zicfiss-lp64d:-static" $ make -j$(nproc) Qemu ---- Get the lastest qemu $ cd qemu $ mkdir build $ cd build $ ../configure --target-list=riscv64-softmmu $ make -j$(nproc) Opensbi ------- $ git clone git@github.com:deepak0414/opensbi.git -b v6_cfi_spec_split_opensbi $ make CROSS_COMPILE=<your riscv toolchain> -j$(nproc) PLATFORM=generic Linux ----- Running defconfig is fine. CFI is enabled by default if the toolchain supports it. $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) defconfig $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) In case you're building your own rootfs using toolchain, please make sure you pick following patch to ensure that vDSO compiled with lpad and shadow stack. "arch/riscv: compile vdso with landing pad" Branch where above patch can be picked https://github.com/deepak0414/linux-riscv-cfi/tree/vdso_user_cfi_v6.12-rc1 Running ------- Modify your qemu command to have: -bios <path-to-cfi-opensbi>/build/platform/generic/firmware/fw_dynamic.bin -cpu rv64,zicfilp=true,zicfiss=true,zimop=true,zcmop=true vDSO related Opens (in the flux) ================================= I am listing these opens for laying out plan and what to expect in future patch sets. And of course for the sake of discussion. Shadow stack and landing pad enabling in vDSO ---------------------------------------------- vDSO must have shadow stack and landing pad support compiled in for task to have shadow stack and landing pad support. This patch series doesn't enable that (yet). Enabling shadow stack support in vDSO should be straight forward (intend to do that in next versions of patch set). Enabling landing pad support in vDSO requires some collaboration with toolchain folks to follow a single label scheme for all object binaries. This is necessary to ensure that all indirect call-sites are setting correct label and target landing pads are decorated with same label scheme. How many vDSOs --------------- Shadow stack instructions are carved out of zimop (may be operations) and if CPU doesn't implement zimop, they're illegal instructions. Kernel could be running on a CPU which may or may not implement zimop. And thus kernel will have to carry 2 different vDSOs and expose the appropriate one depending on whether CPU implements zimop or not. References ========== [1] - https://github.com/riscv/riscv-cfi [2] - https://lore.kernel.org/all/20240814081126.956287-1-samuel.holland@sifive.c… [3] - https://lwn.net/Articles/889475/ [4] - https://developer.arm.com/documentation/109576/0100/Branch-Target-Identific… [5] - https://www.intel.com/content/dam/develop/external/us/en/documents/catc17-i… [6] - https://lwn.net/Articles/940403/ --- changelog --------- v10: - dropped "mm: helper `is_shadow_stack_vma` to check shadow stack vma". This patch is not that interesting to this patch series for risc-v. There are instances in arch directories where VM_SHADOW_STACK flag is anyways used. Dropping this patch to expedite merging in riscv tree. - Took suggestions from `Clement` on "riscv: zicfiss / zicfilp enumeration" to validate presence of cfi based on config. - Added a patch for vDSO to have `lpad 0`. I had omitted this earlier to make sure we add single vdso object with cfi enabled. But a vdso object with scheme of zero labeled landing pad is least common denominator and should work with all objects of zero labeled as well as function-signature labeled objects. v9: - rebased on master (39a803b754d5 fix braino in "9p: fix ->rename_sem exclusion") - dropped "mm: Introduce ARCH_HAS_USER_SHADOW_STACK" (master has it from arm64/gcs) - dropped "prctl: arch-agnostic prctl for shadow stack" (master has it from arm64/gcs) v8: - rebased on palmer/for-next - dropped samuel holland's `envcfg` context switch patches. they are in parlmer/for-next v7: - Removed "riscv/Kconfig: enable HAVE_EXIT_THREAD for riscv" Instead using `deactivate_mm` flow to clean up. see here for more context https://lore.kernel.org/all/20230908203655.543765-1-rick.p.edgecombe@intel.… - Changed the header include in `kselftest`. Hopefully this fixes compile issue faced by Zong Li at SiFive. - Cleaned up an orphaned change to `mm/mmap.c` in below patch "riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE" - Lock interfaces for shadow stack and indirect branch tracking expect arg == 0 Any future evolution of this interface should accordingly define how arg should be setup. - `mm/map.c` has an instance of using `VM_SHADOW_STACK`. Fixed it to use helper `is_shadow_stack_vma`. - Link to v6: https://lore.kernel.org/r/20241008-v5_user_cfi_series-v6-0-60d9fe073f37@riv… v6: - Picked up Samuel Holland's changes as is with `envcfg` placed in `thread` instead of `thread_info` - fixed unaligned newline escapes in kselftest - cleaned up messages in kselftest and included test output in commit message - fixed a bug in clone path reported by Zong Li - fixed a build issue if CONFIG_RISCV_ISA_V is not selected (this was introduced due to re-factoring signal context management code) v5: - rebased on v6.12-rc1 - Fixed schema related issues in device tree file - Fixed some of the documentation related issues in zicfilp/ss.rst (style issues and added index) - added `SHADOW_STACK_SET_MARKER` so that implementation can define base of shadow stack. - Fixed warnings on definitions added in usercfi.h when CONFIG_RISCV_USER_CFI is not selected. - Adopted context header based signal handling as proposed by Andy Chiu - Added support for enabling kernel mode access to shadow stack using FWFT (https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/src/ext-firmware…) - Link to v5: https://lore.kernel.org/r/20241001-v5_user_cfi_series-v1-0-3ba65b6e550f@riv… (Note: I had an issue in my workflow due to which version number wasn't picked up correctly while sending out patches) v4: - rebased on 6.11-rc6 - envcfg: Converged with Samuel Holland's patches for envcfg management on per- thread basis. - vma_is_shadow_stack is renamed to is_vma_shadow_stack - picked up Mark Brown's `ARCH_HAS_USER_SHADOW_STACK` patch - signal context: using extended context management to maintain compatibility. - fixed `-Wmissing-prototypes` compiler warnings for prctl functions - Documentation fixes and amending typos. - Link to v4: https://lore.kernel.org/all/20240912231650.3740732-1-debug@rivosinc.com/ v3: - envcfg logic to pick up base envcfg had a bug where `ENVCFG_CBZE` could have been picked on per task basis, even though CPU didn't implement it. Fixed in this series. - dt-bindings As suggested, split into separate commit. fixed the messaging that spec is in public review - arch_is_shadow_stack change arch_is_shadow_stack changed to vma_is_shadow_stack - hwprobe zicfiss / zicfilp if present will get enumerated in hwprobe - selftests As suggested, added object and binary filenames to .gitignore Selftest binary anyways need to be compiled with cfi enabled compiler which will make sure that landing pad and shadow stack are enabled. Thus removed separate enable/disable tests. Cleaned up tests a bit. - Link to v3: https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/ v2: - Using config `CONFIG_RISCV_USER_CFI`, kernel support for riscv control flow integrity for user mode programs can be compiled in the kernel. - Enabling of control flow integrity for user programs is left to user runtime - This patch series introduces arch agnostic `prctls` to enable shadow stack and indirect branch tracking. And implements them on riscv. --- --- Andy Chiu (1): riscv: signal: abstract header saving for setup_sigcontext Clément Léger (1): riscv: Add Firmware Feature SBI extensions definitions Deepak Gupta (24): mm: VM_SHADOW_STACK definition for riscv dt-bindings: riscv: zicfilp and zicfiss in dt-bindings (extensions.yaml) riscv: zicfiss / zicfilp enumeration riscv: zicfiss / zicfilp extension csr and bit definitions riscv: usercfi state for task and save/restore of CSR_SSP on trap entry/exit riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE riscv mm: manufacture shadow stack pte riscv mmu: teach pte_mkwrite to manufacture shadow stack PTEs riscv mmu: write protect and shadow stack riscv/mm: Implement map_shadow_stack() syscall riscv/shstk: If needed allocate a new shadow stack on clone riscv: Implements arch agnostic shadow stack prctls prctl: arch-agnostic prctl for indirect branch tracking riscv/traps: Introduce software check exception riscv/signal: save and restore of shadow stack for signal riscv/kernel: update __show_regs to print shadow stack register riscv/ptrace: riscv cfi status and state via ptrace and in core files riscv/hwprobe: zicfilp / zicfiss enumeration in hwprobe riscv: enable kernel access to shadow stack memory via FWFT sbi call riscv: kernel command line option to opt out of user cfi riscv: create a config for shadow stack and landing pad instr support riscv: Documentation for landing pad / indirect branch tracking riscv: Documentation for shadow stack on riscv kselftest/riscv: kselftest for user mode cfi Jim Shu (1): arch/riscv: compile vdso with landing pad Documentation/arch/riscv/index.rst | 2 + Documentation/arch/riscv/zicfilp.rst | 115 +++++ Documentation/arch/riscv/zicfiss.rst | 176 +++++++ .../devicetree/bindings/riscv/extensions.yaml | 14 + arch/riscv/Kconfig | 20 + arch/riscv/Makefile | 7 +- arch/riscv/include/asm/asm-prototypes.h | 1 + arch/riscv/include/asm/assembler.h | 44 ++ arch/riscv/include/asm/cpufeature.h | 13 + arch/riscv/include/asm/csr.h | 16 + arch/riscv/include/asm/entry-common.h | 2 + arch/riscv/include/asm/hwcap.h | 2 + arch/riscv/include/asm/mman.h | 25 + arch/riscv/include/asm/mmu_context.h | 7 + arch/riscv/include/asm/pgtable.h | 30 +- arch/riscv/include/asm/processor.h | 2 + arch/riscv/include/asm/sbi.h | 26 + arch/riscv/include/asm/thread_info.h | 3 + arch/riscv/include/asm/usercfi.h | 89 ++++ arch/riscv/include/asm/vector.h | 3 + arch/riscv/include/uapi/asm/hwprobe.h | 2 + arch/riscv/include/uapi/asm/ptrace.h | 22 + arch/riscv/include/uapi/asm/sigcontext.h | 1 + arch/riscv/kernel/Makefile | 1 + arch/riscv/kernel/asm-offsets.c | 8 + arch/riscv/kernel/cpufeature.c | 13 + arch/riscv/kernel/entry.S | 31 +- arch/riscv/kernel/head.S | 12 + arch/riscv/kernel/process.c | 26 +- arch/riscv/kernel/ptrace.c | 83 ++++ arch/riscv/kernel/signal.c | 142 +++++- arch/riscv/kernel/sys_hwprobe.c | 2 + arch/riscv/kernel/sys_riscv.c | 10 + arch/riscv/kernel/traps.c | 43 ++ arch/riscv/kernel/usercfi.c | 524 +++++++++++++++++++++ arch/riscv/kernel/vdso/Makefile | 8 + arch/riscv/kernel/vdso/flush_icache.S | 4 + arch/riscv/kernel/vdso/getcpu.S | 4 + arch/riscv/kernel/vdso/rt_sigreturn.S | 4 + arch/riscv/kernel/vdso/sys_hwprobe.S | 4 + arch/riscv/mm/init.c | 2 +- arch/riscv/mm/pgtable.c | 17 + include/linux/cpu.h | 4 + include/linux/mm.h | 7 + include/uapi/linux/elf.h | 1 + include/uapi/linux/prctl.h | 27 ++ kernel/sys.c | 30 ++ tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/cfi/.gitignore | 3 + tools/testing/selftests/riscv/cfi/Makefile | 10 + tools/testing/selftests/riscv/cfi/cfi_rv_test.h | 84 ++++ tools/testing/selftests/riscv/cfi/riscv_cfi_test.c | 78 +++ tools/testing/selftests/riscv/cfi/shadowstack.c | 375 +++++++++++++++ tools/testing/selftests/riscv/cfi/shadowstack.h | 37 ++ 54 files changed, 2189 insertions(+), 29 deletions(-) --- base-commit: 39a803b754d5224a3522016b564113ee1e4091b2 change-id: 20240930-v5_user_cfi_series-3dc332f8f5b2 -- - debug

2 months, 2 weeks

1
27
0 0

[PATCH v5 0/2] scanf: convert self-test to KUnit

by Tamir Duberstein

This is one of just 3 remaining "Test Module" kselftests (the others being bitmap and printf), the rest having been converted to KUnit. In addition to the enclosed patch, please consider this an RFC on the removal of the "Test Module" kselftest machinery. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 scanf Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v5: - Remove extraneous trailing newlines from failure messages. - Replace `pr_debug` with `kunit_printk`. - Use static char arrays instead of kmalloc. - Drop KUnit boilerplate from CONFIG_SCANF_KUNIT_TEST help text. - Drop arch changes. - Link to v4: https://lore.kernel.org/r/20250207-scanf-kunit-convert-v4-0-a23e2afaede8@gm… Changes in v4: - Bake `test` into various macros, greatly reducing diff noise. - Revert control flow changes. - Link to v3: https://lore.kernel.org/r/20250204-scanf-kunit-convert-v3-0-386d7c3ee714@gm… Changes in v3: - Reduce diff noise in lib/Makefile. (Petr Mladek) - Split `scanf_test` into a few test cases. New output: : =================== scanf (10 subtests) ==================== : [PASSED] numbers_simple : ====================== numbers_list ======================= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ================== [PASSED] numbers_list =================== : ============ numbers_list_field_width_typemax ============= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======== [PASSED] numbers_list_field_width_typemax ========= : =========== numbers_list_field_width_val_width ============ : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======= [PASSED] numbers_list_field_width_val_width ======== : [PASSED] numbers_slice : [PASSED] numbers_prefix_overflow : [PASSED] test_simple_strtoull : [PASSED] test_simple_strtoll : [PASSED] test_simple_strtoul : [PASSED] test_simple_strtol : ====================== [PASSED] scanf ====================== : ============================================================ : Testing complete. Ran 22 tests: passed: 22 : Elapsed time: 5.517s total, 0.001s configuring, 5.440s building, 0.067s running - Link to v2: https://lore.kernel.org/r/20250203-scanf-kunit-convert-v2-1-277a618d804e@gm… Changes in v2: - Rename lib/{test_scanf.c => scanf_kunit.c}. (Andy Shevchenko) - Link to v1: https://lore.kernel.org/r/20250131-scanf-kunit-convert-v1-1-0976524f0eba@gm… --- Tamir Duberstein (2): scanf: convert self-test to KUnit scanf: break kunit into test cases MAINTAINERS | 2 +- lib/Kconfig.debug | 12 +- lib/Makefile | 2 +- lib/{test_scanf.c => scanf_kunit.c} | 278 ++++++++++++++++------------------- tools/testing/selftests/lib/Makefile | 2 +- tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/scanf.sh | 4 - 7 files changed, 138 insertions(+), 163 deletions(-) --- base-commit: a64dcfb451e254085a7daee5fe51bf22959d52d3 change-id: 20250131-scanf-kunit-convert-f70dc33bb34c Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

2
5
0 0

[PATCH v6 3/3] rseq/selftests: Add test for mm_cid compaction

by Gabriele Monaco

A task in the kernel (task_mm_cid_work) runs somewhat periodically to compact the mm_cid for each process. Add a test to validate that it runs correctly and timely. The test spawns 1 thread pinned to each CPU, then each thread, including the main one, runs in short bursts for some time. During this period, the mm_cids should be spanning all numbers between 0 and nproc. At the end of this phase, a thread with high enough mm_cid (>= nproc/2) is selected to be the new leader, all other threads terminate. After some time, the only running thread should see 0 as mm_cid, if that doesn't happen, the compaction mechanism didn't work and the test fails. The test never fails if only 1 core is available, in which case, we cannot test anything as the only available mm_cid is 0. Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Signed-off-by: Gabriele Monaco <gmonaco(a)redhat.com> --- tools/testing/selftests/rseq/.gitignore | 1 + tools/testing/selftests/rseq/Makefile | 2 +- .../selftests/rseq/mm_cid_compaction_test.c | 200 ++++++++++++++++++ 3 files changed, 202 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/rseq/mm_cid_compaction_test.c diff --git a/tools/testing/selftests/rseq/.gitignore b/tools/testing/selftests/rseq/.gitignore index 16496de5f6ce4..2c89f97e4f737 100644 --- a/tools/testing/selftests/rseq/.gitignore +++ b/tools/testing/selftests/rseq/.gitignore @@ -3,6 +3,7 @@ basic_percpu_ops_test basic_percpu_ops_mm_cid_test basic_test basic_rseq_op_test +mm_cid_compaction_test param_test param_test_benchmark param_test_compare_twice diff --git a/tools/testing/selftests/rseq/Makefile b/tools/testing/selftests/rseq/Makefile index 5a3432fceb586..ce1b38f46a355 100644 --- a/tools/testing/selftests/rseq/Makefile +++ b/tools/testing/selftests/rseq/Makefile @@ -16,7 +16,7 @@ OVERRIDE_TARGETS = 1 TEST_GEN_PROGS = basic_test basic_percpu_ops_test basic_percpu_ops_mm_cid_test param_test \ param_test_benchmark param_test_compare_twice param_test_mm_cid \ - param_test_mm_cid_benchmark param_test_mm_cid_compare_twice + param_test_mm_cid_benchmark param_test_mm_cid_compare_twice mm_cid_compaction_test TEST_GEN_PROGS_EXTENDED = librseq.so diff --git a/tools/testing/selftests/rseq/mm_cid_compaction_test.c b/tools/testing/selftests/rseq/mm_cid_compaction_test.c new file mode 100644 index 0000000000000..7ddde3b657dd6 --- /dev/null +++ b/tools/testing/selftests/rseq/mm_cid_compaction_test.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: LGPL-2.1 +#define _GNU_SOURCE +#include <assert.h> +#include <pthread.h> +#include <sched.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <stddef.h> + +#include "../kselftest.h" +#include "rseq.h" + +#define VERBOSE 0 +#define printf_verbose(fmt, ...) \ + do { \ + if (VERBOSE) \ + printf(fmt, ##__VA_ARGS__); \ + } while (0) + +/* 0.5 s */ +#define RUNNER_PERIOD 500000 +/* Number of runs before we terminate or get the token */ +#define THREAD_RUNS 5 + +/* + * Number of times we check that the mm_cid were compacted. + * Checks are repeated every RUNNER_PERIOD. + */ +#define MM_CID_COMPACT_TIMEOUT 10 + +struct thread_args { + int cpu; + int num_cpus; + pthread_mutex_t *token; + pthread_barrier_t *barrier; + pthread_t *tinfo; + struct thread_args *args_head; +}; + +static void __noreturn *thread_runner(void *arg) +{ + struct thread_args *args = arg; + int i, ret, curr_mm_cid; + cpu_set_t cpumask; + + CPU_ZERO(&cpumask); + CPU_SET(args->cpu, &cpumask); + ret = pthread_setaffinity_np(pthread_self(), sizeof(cpumask), &cpumask); + if (ret) { + errno = ret; + perror("Error: failed to set affinity"); + abort(); + } + pthread_barrier_wait(args->barrier); + + for (i = 0; i < THREAD_RUNS; i++) + usleep(RUNNER_PERIOD); + curr_mm_cid = rseq_current_mm_cid(); + /* + * We select one thread with high enough mm_cid to be the new leader. + * All other threads (including the main thread) will terminate. + * After some time, the mm_cid of the only remaining thread should + * converge to 0, if not, the test fails. + */ + if (curr_mm_cid >= args->num_cpus / 2 && + !pthread_mutex_trylock(args->token)) { + printf_verbose( + "cpu%d has mm_cid=%d and will be the new leader.\n", + sched_getcpu(), curr_mm_cid); + for (i = 0; i < args->num_cpus; i++) { + if (args->tinfo[i] == pthread_self()) + continue; + ret = pthread_join(args->tinfo[i], NULL); + if (ret) { + errno = ret; + perror("Error: failed to join thread"); + abort(); + } + } + pthread_barrier_destroy(args->barrier); + free(args->tinfo); + free(args->token); + free(args->barrier); + free(args->args_head); + + for (i = 0; i < MM_CID_COMPACT_TIMEOUT; i++) { + curr_mm_cid = rseq_current_mm_cid(); + printf_verbose("run %d: mm_cid=%d on cpu%d.\n", i, + curr_mm_cid, sched_getcpu()); + if (curr_mm_cid == 0) + exit(EXIT_SUCCESS); + usleep(RUNNER_PERIOD); + } + exit(EXIT_FAILURE); + } + printf_verbose("cpu%d has mm_cid=%d and is going to terminate.\n", + sched_getcpu(), curr_mm_cid); + pthread_exit(NULL); +} + +int test_mm_cid_compaction(void) +{ + cpu_set_t affinity; + int i, j, ret = 0, num_threads; + pthread_t *tinfo; + pthread_mutex_t *token; + pthread_barrier_t *barrier; + struct thread_args *args; + + sched_getaffinity(0, sizeof(affinity), &affinity); + num_threads = CPU_COUNT(&affinity); + tinfo = calloc(num_threads, sizeof(*tinfo)); + if (!tinfo) { + perror("Error: failed to allocate tinfo"); + return -1; + } + args = calloc(num_threads, sizeof(*args)); + if (!args) { + perror("Error: failed to allocate args"); + ret = -1; + goto out_free_tinfo; + } + token = malloc(sizeof(*token)); + if (!token) { + perror("Error: failed to allocate token"); + ret = -1; + goto out_free_args; + } + barrier = malloc(sizeof(*barrier)); + if (!barrier) { + perror("Error: failed to allocate barrier"); + ret = -1; + goto out_free_token; + } + if (num_threads == 1) { + fprintf(stderr, "Cannot test on a single cpu. " + "Skipping mm_cid_compaction test.\n"); + /* only skipping the test, this is not a failure */ + goto out_free_barrier; + } + pthread_mutex_init(token, NULL); + ret = pthread_barrier_init(barrier, NULL, num_threads); + if (ret) { + errno = ret; + perror("Error: failed to initialise barrier"); + goto out_free_barrier; + } + for (i = 0, j = 0; i < CPU_SETSIZE && j < num_threads; i++) { + if (!CPU_ISSET(i, &affinity)) + continue; + args[j].num_cpus = num_threads; + args[j].tinfo = tinfo; + args[j].token = token; + args[j].barrier = barrier; + args[j].cpu = i; + args[j].args_head = args; + if (!j) { + /* The first thread is the main one */ + tinfo[0] = pthread_self(); + ++j; + continue; + } + ret = pthread_create(&tinfo[j], NULL, thread_runner, &args[j]); + if (ret) { + errno = ret; + perror("Error: failed to create thread"); + abort(); + } + ++j; + } + printf_verbose("Started %d threads.\n", num_threads); + + /* Also main thread will terminate if it is not selected as leader */ + thread_runner(&args[0]); + + /* only reached in case of errors */ +out_free_barrier: + free(barrier); +out_free_token: + free(token); +out_free_args: + free(args); +out_free_tinfo: + free(tinfo); + + return ret; +} + +int main(int argc, char **argv) +{ + if (!rseq_mm_cid_available()) { + fprintf(stderr, "Error: rseq_mm_cid unavailable\n"); + return -1; + } + if (test_mm_cid_compaction()) + return -1; + return 0; +} -- 2.48.1

2 months, 2 weeks

1
0
0 0

[PATCH v2 0/2] printf: convert self-test to KUnit

by Tamir Duberstein

This is one of just 3 remaining "Test Module" kselftests (the others being bitmap and scanf), the rest having been converted to KUnit. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 printf I have also sent out a series converting scanf[0]. Link: https://lore.kernel.org/all/20250204-scanf-kunit-convert-v3-0-386d7c3ee714@… [0] Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v2: - Incorporate code review from prior work[0] by Arpitha Raghunandan. - Link to v1: https://lore.kernel.org/r/20250204-printf-kunit-convert-v1-0-ecf1b846a4de@g… Link: https://lore.kernel.org/lkml/20200817043028.76502-1-98.arpi@gmail.com/t/#u [0] --- Tamir Duberstein (2): printf: convert self-test to KUnit printf: break kunit into test cases Documentation/core-api/printk-formats.rst | 2 +- MAINTAINERS | 2 +- arch/m68k/configs/amiga_defconfig | 1 - arch/m68k/configs/apollo_defconfig | 1 - arch/m68k/configs/atari_defconfig | 1 - arch/m68k/configs/bvme6000_defconfig | 1 - arch/m68k/configs/hp300_defconfig | 1 - arch/m68k/configs/mac_defconfig | 1 - arch/m68k/configs/multi_defconfig | 1 - arch/m68k/configs/mvme147_defconfig | 1 - arch/m68k/configs/mvme16x_defconfig | 1 - arch/m68k/configs/q40_defconfig | 1 - arch/m68k/configs/sun3_defconfig | 1 - arch/m68k/configs/sun3x_defconfig | 1 - arch/powerpc/configs/ppc64_defconfig | 1 - lib/Kconfig.debug | 20 +- lib/Makefile | 2 +- lib/{test_printf.c => printf_kunit.c} | 400 ++++++++++++------------------ tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/printf.sh | 4 - 20 files changed, 182 insertions(+), 262 deletions(-) --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250131-printf-kunit-convert-fd4012aa2ec6 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

3
7
0 0

[PATCH v5 0/7] ptrace: introduce PTRACE_SET_SYSCALL_INFO API

by Dmitry V. Levin

PTRACE_SET_SYSCALL_INFO is a generic ptrace API that complements PTRACE_GET_SYSCALL_INFO by letting the ptracer modify details of system calls the tracee is blocked in. This API allows ptracers to obtain and modify system call details in a straightforward and architecture-agnostic way, providing a consistent way of manipulating the system call number and arguments across architectures. As in case of PTRACE_GET_SYSCALL_INFO, PTRACE_SET_SYSCALL_INFO also does not aim to address numerous architecture-specific system call ABI peculiarities, like differences in the number of system call arguments for such system calls as pread64 and preadv. The current implementation supports changing only those bits of system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. Support of changing additional details returned by PTRACE_GET_SYSCALL_INFO, such as instruction pointer and stack pointer, could be added later if needed, by using struct ptrace_syscall_info.flags to specify the additional details that should be set. Currently, "flags" and "reserved" fields of struct ptrace_syscall_info must be initialized with zeroes; "arch", "instruction_pointer", and "stack_pointer" fields are currently ignored. PTRACE_SET_SYSCALL_INFO currently supports only PTRACE_SYSCALL_INFO_ENTRY, PTRACE_SYSCALL_INFO_EXIT, and PTRACE_SYSCALL_INFO_SECCOMP operations. Other operations could be added later if needed. Ideally, PTRACE_SET_SYSCALL_INFO should have been introduced along with PTRACE_GET_SYSCALL_INFO, but it didn't happen. The last straw that convinced me to implement PTRACE_SET_SYSCALL_INFO was apparent failure to provide an API of changing the first system call argument on riscv architecture [1]. ptrace(2) man page: long ptrace(enum __ptrace_request request, pid_t pid, void *addr, void *data); ... PTRACE_SET_SYSCALL_INFO Modify information about the system call that caused the stop. The "data" argument is a pointer to struct ptrace_syscall_info that specifies the system call information to be set. The "addr" argument should be set to sizeof(struct ptrace_syscall_info)). [1] https://lore.kernel.org/all/59505464-c84a-403d-972f-d4b2055eeaac@gmail.com/ Notes: v5: * ptrace: Extend the commit message to say that the new API does not aim to address numerous architecture-specific syscall ABI peculiarities * selftests: Add a workaround for s390 16-bit syscall numbers * Add more Acked-by * v4: https://lore.kernel.org/all/20250203065849.GA14120@strace.io/ v4: * Split out syscall_set_return_value() for hexagon into a separate patch * s390: Change the style of syscall_set_arguments() implementation as requested * Add more Reviewed-by * v3: https://lore.kernel.org/all/20250128091445.GA8257@strace.io/ v3: * powerpc: Submit syscall_set_return_value() fix for "sc" case separately * mips: Do not introduce erroneous argument truncation on mips n32, add a detailed description to the commit message of the mips_get_syscall_arg() change * ptrace: Add explicit padding to the end of struct ptrace_syscall_info, simplify obtaining of user ptrace_syscall_info, do not introduce PTRACE_SYSCALL_INFO_SIZE_VER0 * ptrace: Change the return type of ptrace_set_syscall_info_* functions from "unsigned long" to "int" * ptrace: Add -ERANGE check to ptrace_set_syscall_info_exit(), add comments to -ERANGE checks * ptrace: Update comments about supported syscall stops * selftests: Extend set_syscall_info test, fix for mips n32 * Add Tested-by and Reviewed-by v2: * Add patch to fix syscall_set_return_value() on powerpc * Add patch to fix mips_get_syscall_arg() on mips * Add syscall_set_return_value() implementation on hexagon * Add syscall_set_return_value() invocation to syscall_set_nr() on arm and arm64. * Fix syscall_set_nr() and mips_set_syscall_arg() on mips * Add a comment to syscall_set_nr() on arc, powerpc, s390, sh, and sparc * Remove redundant ptrace_syscall_info.op assignments in ptrace_get_syscall_info_* * Minor style tweaks in ptrace_get_syscall_info_op() * Remove syscall_set_return_value() invocation from ptrace_set_syscall_info_entry() * Skip syscall_set_arguments() invocation in case of syscall number -1 in ptrace_set_syscall_info_entry() * Split ptrace_syscall_info.reserved into ptrace_syscall_info.reserved and ptrace_syscall_info.flags * Use __kernel_ulong_t instead of unsigned long in set_syscall_info test Dmitry V. Levin (7): mips: fix mips_get_syscall_arg() for o32 hexagon: add syscall_set_return_value() syscall.h: add syscall_set_arguments() syscall.h: introduce syscall_set_nr() ptrace_get_syscall_info: factor out ptrace_get_syscall_info_op ptrace: introduce PTRACE_SET_SYSCALL_INFO request selftests/ptrace: add a test case for PTRACE_SET_SYSCALL_INFO arch/arc/include/asm/syscall.h | 25 + arch/arm/include/asm/syscall.h | 37 ++ arch/arm64/include/asm/syscall.h | 29 + arch/csky/include/asm/syscall.h | 13 + arch/hexagon/include/asm/syscall.h | 21 + arch/loongarch/include/asm/syscall.h | 15 + arch/m68k/include/asm/syscall.h | 7 + arch/microblaze/include/asm/syscall.h | 7 + arch/mips/include/asm/syscall.h | 70 ++- arch/nios2/include/asm/syscall.h | 16 + arch/openrisc/include/asm/syscall.h | 13 + arch/parisc/include/asm/syscall.h | 19 + arch/powerpc/include/asm/syscall.h | 20 + arch/riscv/include/asm/syscall.h | 16 + arch/s390/include/asm/syscall.h | 21 + arch/sh/include/asm/syscall_32.h | 24 + arch/sparc/include/asm/syscall.h | 22 + arch/um/include/asm/syscall-generic.h | 19 + arch/x86/include/asm/syscall.h | 43 ++ arch/xtensa/include/asm/syscall.h | 18 + include/asm-generic/syscall.h | 30 + include/uapi/linux/ptrace.h | 7 +- kernel/ptrace.c | 179 +++++- tools/testing/selftests/ptrace/Makefile | 2 +- .../selftests/ptrace/set_syscall_info.c | 519 ++++++++++++++++++ 25 files changed, 1145 insertions(+), 47 deletions(-) create mode 100644 tools/testing/selftests/ptrace/set_syscall_info.c -- ldv

2 months, 2 weeks

1
0
0 0

[PATCH v9 00/26] riscv control-flow integrity for usermode

by Deepak Gupta

Basics and overview =================== Software with larger attack surfaces (e.g. network facing apps like databases, browsers or apps relying on browser runtimes) suffer from memory corruption issues which can be utilized by attackers to bend control flow of the program to eventually gain control (by making their payload executable). Attackers are able to perform such attacks by leveraging call-sites which rely on indirect calls or return sites which rely on obtaining return address from stack memory. To mitigate such attacks, risc-v extension zicfilp enforces that all indirect calls must land on a landing pad instruction `lpad` else cpu will raise software check exception (a new cpu exception cause code on riscv). Similarly for return flow, risc-v extension zicfiss extends architecture with - `sspush` instruction to push return address on a shadow stack - `sspopchk` instruction to pop return address from shadow stack and compare with input operand (i.e. return address on stack) - `sspopchk` to raise software check exception if comparision above was a mismatch - Protection mechanism using which shadow stack is not writeable via regular store instructions More information an details can be found at extensions github repo [1]. Equivalent to landing pad (zicfilp) on x86 is `ENDBRANCH` instruction in Intel CET [3] and branch target identification (BTI) [4] on arm. Similarly x86's Intel CET has shadow stack [5] and arm64 has guarded control stack (GCS) [6] which are very similar to risc-v's zicfiss shadow stack. x86 and arm64 support for user mode shadow stack is already in mainline. Kernel awareness for user control flow integrity ================================================ This series picks up Samuel Holland's envcfg changes [2] as well. So if those are being applied independently, they should be removed from this series. Enabling: In order to maintain compatibility and not break anything in user mode, kernel doesn't enable control flow integrity cpu extensions on binary by default. Instead exposes a prctl interface to enable, disable and lock the shadow stack or landing pad feature for a task. This allows userspace (loader) to enumerate if all objects in its address space are compiled with shadow stack and landing pad support and accordingly enable the feature. Additionally if a subsequent `dlopen` happens on a library, user mode can take a decision again to disable the feature (if incoming library is not compiled with support) OR terminate the task (if user mode policy is strict to have all objects in address space to be compiled with control flow integirty cpu feature). prctl to enable shadow stack results in allocating shadow stack from virtual memory and activating for user address space. x86 and arm64 are also following same direction due to similar reason(s). clone/fork: On clone and fork, cfi state for task is inherited by child. Shadow stack is part of virtual memory and is a writeable memory from kernel perspective (writeable via a restricted set of instructions aka shadow stack instructions) Thus kernel changes ensure that this memory is converted into read-only when fork/clone happens and COWed when fault is taken due to sspush, sspopchk or ssamoswap. In case `CLONE_VM` is specified and shadow stack is to be enabled, kernel will automatically allocate a shadow stack for that clone call. map_shadow_stack: x86 introduced `map_shadow_stack` system call to allow user space to explicitly map shadow stack memory in its address space. It is useful to allocate shadow for different contexts managed by a single thread (green threads or contexts) risc-v implements this system call as well. signal management: If shadow stack is enabled for a task, kernel performs an asynchronous control flow diversion to deliver the signal and eventually expects userspace to issue sigreturn so that original execution can be resumed. Even though resume context is prepared by kernel, it is in user space memory and is subject to memory corruption and corruption bugs can be utilized by attacker in this race window to perform arbitrary sigreturn and eventually bypass cfi mechanism. Another issue is how to ensure that cfi related state on sigcontext area is not trampled by legacy apps or apps compiled with old kernel headers. In order to mitigate control-flow hijacting, kernel prepares a token and place it on shadow stack before signal delivery and places address of token in sigcontext structure. During sigreturn, kernel obtains address of token from sigcontext struture, reads token from shadow stack and validates it and only then allow sigreturn to succeed. Compatiblity issue is solved by adopting dynamic sigcontext management introduced for vector extension. This series re-factor the code little bit to allow future sigcontext management easy (as proposed by Andy Chiu from SiFive) config and compilation: Introduce a new risc-v config option `CONFIG_RISCV_USER_CFI`. Selecting this config option picks the kernel support for user control flow integrity. This optin is presented only if toolchain has shadow stack and landing pad support. And is on purpose guarded by toolchain support. Reason being that eventually vDSO also needs to be compiled in with shadow stack and landing pad support. vDSO compile patches are not included as of now because landing pad labeling scheme is yet to settle for usermode runtime. To get more information on kernel interactions with respect to zicfilp and zicfiss, patch series adds documentation for `zicfilp` and `zicfiss` in following: Documentation/arch/riscv/zicfiss.rst Documentation/arch/riscv/zicfilp.rst How to test this series ======================= Toolchain --------- $ git clone git@github.com:sifive/riscv-gnu-toolchain.git -b cfi-dev $ riscv-gnu-toolchain/configure --prefix=<path-to-where-to-build> --with-arch=rv64gc_zicfilp_zicfiss --enable-linux --disable-gdb --with-extra-multilib-test="rv64gc_zicfilp_zicfiss-lp64d:-static" $ make -j$(nproc) Qemu ---- Get the lastest qemu $ cd qemu $ mkdir build $ cd build $ ../configure --target-list=riscv64-softmmu $ make -j$(nproc) Opensbi ------- $ git clone git@github.com:deepak0414/opensbi.git -b v6_cfi_spec_split_opensbi $ make CROSS_COMPILE=<your riscv toolchain> -j$(nproc) PLATFORM=generic Linux ----- Running defconfig is fine. CFI is enabled by default if the toolchain supports it. $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) defconfig $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) In case you're building your own rootfs using toolchain, please make sure you pick following patch to ensure that vDSO compiled with lpad and shadow stack. "arch/riscv: compile vdso with landing pad" Branch where above patch can be picked https://github.com/deepak0414/linux-riscv-cfi/tree/vdso_user_cfi_v6.12-rc1 Running ------- Modify your qemu command to have: -bios <path-to-cfi-opensbi>/build/platform/generic/firmware/fw_dynamic.bin -cpu rv64,zicfilp=true,zicfiss=true,zimop=true,zcmop=true vDSO related Opens (in the flux) ================================= I am listing these opens for laying out plan and what to expect in future patch sets. And of course for the sake of discussion. Shadow stack and landing pad enabling in vDSO ---------------------------------------------- vDSO must have shadow stack and landing pad support compiled in for task to have shadow stack and landing pad support. This patch series doesn't enable that (yet). Enabling shadow stack support in vDSO should be straight forward (intend to do that in next versions of patch set). Enabling landing pad support in vDSO requires some collaboration with toolchain folks to follow a single label scheme for all object binaries. This is necessary to ensure that all indirect call-sites are setting correct label and target landing pads are decorated with same label scheme. How many vDSOs --------------- Shadow stack instructions are carved out of zimop (may be operations) and if CPU doesn't implement zimop, they're illegal instructions. Kernel could be running on a CPU which may or may not implement zimop. And thus kernel will have to carry 2 different vDSOs and expose the appropriate one depending on whether CPU implements zimop or not. References ========== [1] - https://github.com/riscv/riscv-cfi [2] - https://lore.kernel.org/all/20240814081126.956287-1-samuel.holland@sifive.c… [3] - https://lwn.net/Articles/889475/ [4] - https://developer.arm.com/documentation/109576/0100/Branch-Target-Identific… [5] - https://www.intel.com/content/dam/develop/external/us/en/documents/catc17-i… [6] - https://lwn.net/Articles/940403/ --- changelog --------- v9: - rebased on master (39a803b754d5 fix braino in "9p: fix ->rename_sem exclusion") - dropped "mm: Introduce ARCH_HAS_USER_SHADOW_STACK" (master has it from arm64/gcs) - dropped "prctl: arch-agnostic prctl for shadow stack" (master has it from arm64/gcs) v8: - rebased on palmer/for-next - dropped samuel holland's `envcfg` context switch patches. they are in parlmer/for-next v7: - Removed "riscv/Kconfig: enable HAVE_EXIT_THREAD for riscv" Instead using `deactivate_mm` flow to clean up. see here for more context https://lore.kernel.org/all/20230908203655.543765-1-rick.p.edgecombe@intel.… - Changed the header include in `kselftest`. Hopefully this fixes compile issue faced by Zong Li at SiFive. - Cleaned up an orphaned change to `mm/mmap.c` in below patch "riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE" - Lock interfaces for shadow stack and indirect branch tracking expect arg == 0 Any future evolution of this interface should accordingly define how arg should be setup. - `mm/map.c` has an instance of using `VM_SHADOW_STACK`. Fixed it to use helper `is_shadow_stack_vma`. - Link to v6: https://lore.kernel.org/r/20241008-v5_user_cfi_series-v6-0-60d9fe073f37@riv… v6: - Picked up Samuel Holland's changes as is with `envcfg` placed in `thread` instead of `thread_info` - fixed unaligned newline escapes in kselftest - cleaned up messages in kselftest and included test output in commit message - fixed a bug in clone path reported by Zong Li - fixed a build issue if CONFIG_RISCV_ISA_V is not selected (this was introduced due to re-factoring signal context management code) v5: - rebased on v6.12-rc1 - Fixed schema related issues in device tree file - Fixed some of the documentation related issues in zicfilp/ss.rst (style issues and added index) - added `SHADOW_STACK_SET_MARKER` so that implementation can define base of shadow stack. - Fixed warnings on definitions added in usercfi.h when CONFIG_RISCV_USER_CFI is not selected. - Adopted context header based signal handling as proposed by Andy Chiu - Added support for enabling kernel mode access to shadow stack using FWFT (https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/src/ext-firmware…) - Link to v5: https://lore.kernel.org/r/20241001-v5_user_cfi_series-v1-0-3ba65b6e550f@riv… (Note: I had an issue in my workflow due to which version number wasn't picked up correctly while sending out patches) v4: - rebased on 6.11-rc6 - envcfg: Converged with Samuel Holland's patches for envcfg management on per- thread basis. - vma_is_shadow_stack is renamed to is_vma_shadow_stack - picked up Mark Brown's `ARCH_HAS_USER_SHADOW_STACK` patch - signal context: using extended context management to maintain compatibility. - fixed `-Wmissing-prototypes` compiler warnings for prctl functions - Documentation fixes and amending typos. - Link to v4: https://lore.kernel.org/all/20240912231650.3740732-1-debug@rivosinc.com/ v3: - envcfg logic to pick up base envcfg had a bug where `ENVCFG_CBZE` could have been picked on per task basis, even though CPU didn't implement it. Fixed in this series. - dt-bindings As suggested, split into separate commit. fixed the messaging that spec is in public review - arch_is_shadow_stack change arch_is_shadow_stack changed to vma_is_shadow_stack - hwprobe zicfiss / zicfilp if present will get enumerated in hwprobe - selftests As suggested, added object and binary filenames to .gitignore Selftest binary anyways need to be compiled with cfi enabled compiler which will make sure that landing pad and shadow stack are enabled. Thus removed separate enable/disable tests. Cleaned up tests a bit. - Link to v3: https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/ v2: - Using config `CONFIG_RISCV_USER_CFI`, kernel support for riscv control flow integrity for user mode programs can be compiled in the kernel. - Enabling of control flow integrity for user programs is left to user runtime - This patch series introduces arch agnostic `prctls` to enable shadow stack and indirect branch tracking. And implements them on riscv. --- Changes in v9: - EDITME: describe what is new in this series revision. - EDITME: use bulletpoints and terse descriptions. - Link to v8: https://lore.kernel.org/r/20241111-v5_user_cfi_series-v8-0-dce14aa30207@riv… Changes in v8: - EDITME: describe what is new in this series revision. - EDITME: use bulletpoints and terse descriptions. - Link to v7: https://lore.kernel.org/r/20241029-v5_user_cfi_series-v7-0-2727ce9936cb@riv… --- Andy Chiu (1): riscv: signal: abstract header saving for setup_sigcontext Clément Léger (1): riscv: Add Firmware Feature SBI extensions definitions Deepak Gupta (24): mm: helper `is_shadow_stack_vma` to check shadow stack vma dt-bindings: riscv: zicfilp and zicfiss in dt-bindings (extensions.yaml) riscv: zicfiss / zicfilp enumeration riscv: zicfiss / zicfilp extension csr and bit definitions riscv: usercfi state for task and save/restore of CSR_SSP on trap entry/exit riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE riscv mm: manufacture shadow stack pte riscv mmu: teach pte_mkwrite to manufacture shadow stack PTEs riscv mmu: write protect and shadow stack riscv/mm: Implement map_shadow_stack() syscall riscv/shstk: If needed allocate a new shadow stack on clone riscv: Implements arch agnostic shadow stack prctls prctl: arch-agnostic prctl for indirect branch tracking riscv/traps: Introduce software check exception riscv/signal: save and restore of shadow stack for signal riscv/kernel: update __show_regs to print shadow stack register riscv/ptrace: riscv cfi status and state via ptrace and in core files riscv/hwprobe: zicfilp / zicfiss enumeration in hwprobe riscv: enable kernel access to shadow stack memory via FWFT sbi call riscv: kernel command line option to opt out of user cfi riscv: create a config for shadow stack and landing pad instr support riscv: Documentation for landing pad / indirect branch tracking riscv: Documentation for shadow stack on riscv kselftest/riscv: kselftest for user mode cfi Documentation/arch/riscv/index.rst | 2 + Documentation/arch/riscv/zicfilp.rst | 115 +++++ Documentation/arch/riscv/zicfiss.rst | 176 +++++++ .../devicetree/bindings/riscv/extensions.yaml | 14 + arch/riscv/Kconfig | 20 + arch/riscv/include/asm/asm-prototypes.h | 1 + arch/riscv/include/asm/cpufeature.h | 13 + arch/riscv/include/asm/csr.h | 16 + arch/riscv/include/asm/entry-common.h | 2 + arch/riscv/include/asm/hwcap.h | 2 + arch/riscv/include/asm/mman.h | 25 + arch/riscv/include/asm/mmu_context.h | 7 + arch/riscv/include/asm/pgtable.h | 30 +- arch/riscv/include/asm/processor.h | 2 + arch/riscv/include/asm/sbi.h | 26 + arch/riscv/include/asm/thread_info.h | 3 + arch/riscv/include/asm/usercfi.h | 89 ++++ arch/riscv/include/asm/vector.h | 3 + arch/riscv/include/uapi/asm/hwprobe.h | 2 + arch/riscv/include/uapi/asm/ptrace.h | 22 + arch/riscv/include/uapi/asm/sigcontext.h | 1 + arch/riscv/kernel/Makefile | 1 + arch/riscv/kernel/asm-offsets.c | 8 + arch/riscv/kernel/cpufeature.c | 2 + arch/riscv/kernel/entry.S | 31 +- arch/riscv/kernel/head.S | 12 + arch/riscv/kernel/process.c | 26 +- arch/riscv/kernel/ptrace.c | 83 ++++ arch/riscv/kernel/signal.c | 142 +++++- arch/riscv/kernel/sys_hwprobe.c | 2 + arch/riscv/kernel/sys_riscv.c | 10 + arch/riscv/kernel/traps.c | 43 ++ arch/riscv/kernel/usercfi.c | 524 +++++++++++++++++++++ arch/riscv/mm/init.c | 2 +- arch/riscv/mm/pgtable.c | 17 + include/linux/cpu.h | 4 + include/uapi/linux/elf.h | 1 + include/uapi/linux/prctl.h | 27 ++ kernel/sys.c | 30 ++ mm/gup.c | 2 +- mm/mmap.c | 2 +- mm/vma.h | 10 +- tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/cfi/.gitignore | 3 + tools/testing/selftests/riscv/cfi/Makefile | 10 + tools/testing/selftests/riscv/cfi/cfi_rv_test.h | 84 ++++ tools/testing/selftests/riscv/cfi/riscv_cfi_test.c | 78 +++ tools/testing/selftests/riscv/cfi/shadowstack.c | 375 +++++++++++++++ tools/testing/selftests/riscv/cfi/shadowstack.h | 37 ++ 49 files changed, 2106 insertions(+), 33 deletions(-) --- base-commit: 39a803b754d5224a3522016b564113ee1e4091b2 change-id: 20240930-v5_user_cfi_series-3dc332f8f5b2 -- - debug

2 months, 2 weeks

4
37
0 0

Re: [PATCH 0/6] KUnit test moves / renames

by Stephen Rothwell

Hi all, On Mon, 10 Feb 2025 04:43:28 +0530 Shuah Khan <skhan(a)linuxfoundation.org> wrote: > > On Sun, Feb 9, 2025, 2:44 AM Kees Cook <kees(a)kernel.org> wrote: > > > On Fri, Oct 11, 2024 at 07:53:43AM -0600, Shuah Khan wrote: > > > On 10/11/24 01:25, David Gow wrote: > > > > As discussed in [1], the KUnit test naming scheme has changed to avoid > > > > name conflicts (and tab-completion woes) with the files being tested. > > > > These renames and moves have caused a nasty set of merge conflicts, so > > > > this series collates and rebases them all to be applied via > > > > mm-nonmm-unstable alongside any lib/ changes[2]. > > > > Shall I carry this in the hardening tree? I didn't see it land in the > > merge window, and I still don't see it in -next? > > > > My thinking was that this series would go through Andrew's tree to avoid > conflicts. Please take it through yours. If they have been rebased onto mm-nonmm-unstable, then they really need to go through Andrew' tree (since mm-nonmm-unstable gets rebased often). -- Cheers, Stephen Rothwell

2 months, 2 weeks

1
0
0 0

[PATCH RFCv2 00/13] iommu: Add MSI mapping support with nested SMMU

by Nicolin Chen

[ Background ] On ARM GIC systems and others, the target address of the MSI is translated by the IOMMU. For GIC, the MSI address page is called "ITS" page. When the IOMMU is disabled, the MSI address is programmed to the physical location of the GIC ITS page (e.g. 0x20200000). When the IOMMU is enabled, the ITS page is behind the IOMMU, so the MSI address is programmed to an allocated IO virtual address (a.k.a IOVA), e.g. 0xFFFF0000, which must be mapped to the physical ITS page: IOVA (0xFFFF0000) ===> PA (0x20200000). When a 2-stage translation is enabled, IOVA will be still used to program the MSI address, though the mappings will be in two stages: IOVA (0xFFFF0000) ===> IPA (e.g. 0x80900000) ===> PA (0x20200000) (IPA stands for Intermediate Physical Address). If the device that generates MSI is attached to an IOMMU_DOMAIN_DMA, the IOVA is dynamically allocated from the top of the IOVA space. If attached to an IOMMU_DOMAIN_UNMANAGED (e.g. a VFIO passthrough device), the IOVA is fixed to an MSI window reported by the IOMMU driver via IOMMU_RESV_SW_MSI, which is hardwired to MSI_IOVA_BASE (IOVA==0x8000000) for ARM IOMMUs. So far, this IOMMU_RESV_SW_MSI works well as kernel is entirely in charge of the IOMMU translation (1-stage translation), since the IOVA for the ITS page is fixed and known by kernel. However, with virtual machine enabling a nested IOMMU translation (2-stage), a guest kernel directly controls the stage-1 translation with an IOMMU_DOMAIN_DMA, mapping a vITS page (at an IPA 0x80900000) onto its own IOVA space (e.g. 0xEEEE0000). Then, the host kernel can't know that guest-level IOVA to program the MSI address. There have been two approaches to solve this problem: 1. Create an identity mapping in the stage-1. VMM could insert a few RMRs (Reserved Memory Regions) in guest's IORT. Then the guest kernel would fetch these RMR entries from the IORT and create an IOMMU_RESV_DIRECT region per iommu group for a direct mapping. Eventually, the mappings would look like: IOVA (0x8000000) === IPA (0x8000000) ===> 0x20200000 This requires an IOMMUFD ioctl for kernel and VMM to agree on the IPA. 2. Forward the guest-level MSI IOVA captured by VMM to the host-level GIC driver, to program the correct MSI IOVA. Forward the VMM-defined vITS page location (IPA) to the kernel for the stage-2 mapping. Eventually: IOVA (0xFFFF0000) ===> IPA (0x80900000) ===> PA (0x20200000) This requires a VFIO ioctl (for IOVA) and an IOMMUFD ioctl (for IPA). Worth mentioning that when Eric Auger was working on the same topic with the VFIO iommu uAPI, he had the approach (2) first, and then switched to the approach (1), suggested by Jean-Philippe for reduction of complexity. The approach (1) basically feels like the existing VFIO passthrough that has a 1-stage mapping for the unmanaged domain, yet only by shifting the MSI mapping from stage 1 (guest-has-no-iommu case) to stage 2 (guest-has- iommu case). So, it could reuse the existing IOMMU_RESV_SW_MSI piece, by sharing the same idea of "VMM leaving everything to the kernel". The approach (2) is an ideal solution, yet it requires additional effort for kernel to be aware of the 1-stage gIOVA(s) and 2-stage IPAs for vITS page(s), which demands VMM to closely cooperate. * It also brings some complicated use cases to the table where the host or/and guest system(s) has/have multiple ITS pages. [ Execution ] Though these two approaches feel very different on the surface, they can share some underlying common infrastructure. Currently, only one pair of sw_msi functions (prepare/compose) are provided by dma-iommu for irqchip drivers to directly use. There could be different versions of functions from different domain owners: for existing VFIO passthrough cases and in- kernel DMA domain cases, reuse the existing dma-iommu's version of sw_msi functions; for nested translation use cases, there can be another version of sw_msi functions to handle mapping and msi_msg(s) differently. To support both approaches, in this series - Get rid of the duplication in the "compose" function - Introduce a function pointer for the previously "prepare" function - Allow different domain owners to set their own "sw_msi" implementations - Implement an iommufd_sw_msi function to additionally support a nested translation use case using the approach (2), i.e. the RMR solution - Add a pair of IOMMUFD options for a SW_MSI window for kernel and VMM to agree on (for approach 1) - Add a new VFIO ioctl to set the MSI(x) vector(s) for iommufd_sw_msi() to update the msi_desc structure accordingly (for approach 2) A missing piece - Potentially another IOMMUFD_CMD_IOAS_MAP_MSI ioctl for VMM to map the IPAs of the vITS page(s) in the stage-2 io page table. (for approach 2) (in this RFC, conveniently reuse the new IOMMUFD SW_MSI options to set the vITS page's IPA, which works finely in a single-vITS-page case.) This is a joint effort that includes Jason's rework in irq/iommu/iommufd base level and my additional patches on top of that for new uAPIs. This series is on github: https://github.com/nicolinc/iommufd/commits/iommufd_msi-rfcv2 Pairing QEMU branch for testing (approach 1): https://github.com/nicolinc/qemu/commits/wip/for_iommufd_msi-rfcv2-rmr Pairing QEMU branch for testing (approach 2): https://github.com/nicolinc/qemu/commits/wip/for_iommufd_msi-rfcv2-vits Changelog v2 * Rebase on v6.13-rc6 * Drop all the irq/pci patches and rework the compose function instead * Add a new sw_msi op to iommu_domain for a per type implementation and let iommufd core has its own implementation to support both approaches * Add RMR-solution (approach 1) support since it is straightforward and have been used in some out-of-tree projects widely v1 https://lore.kernel.org/kvm/cover.1731130093.git.nicolinc@nvidia.com/ Thanks! Nicolin Jason Gunthorpe (5): genirq/msi: Store the IOMMU IOVA directly in msi_desc instead of iommu_cookie genirq/msi: Rename iommu_dma_compose_msi_msg() to msi_msg_set_msi_addr() iommu: Make iommu_dma_prepare_msi() into a generic operation irqchip: Have CONFIG_IRQ_MSI_IOMMU be selected by the irqchips that need it iommufd: Implement sw_msi support natively Nicolin Chen (8): iommu: Turn fault_data to iommufd private pointer iommufd: Make attach_handle generic iommu: Turn iova_cookie to dma-iommu private pointer iommufd: Add IOMMU_OPTION_SW_MSI_START/SIZE ioctls iommufd/selftes: Add coverage for IOMMU_OPTION_SW_MSI_START/SIZE iommufd/device: Allow setting IOVAs for MSI(x) vectors vfio-iommufd: Provide another layer of msi_iova helpers vfio/pci: Allow preset MSI IOVAs via VFIO_IRQ_SET_ACTION_PREPARE drivers/iommu/Kconfig | 1 - drivers/irqchip/Kconfig | 4 + kernel/irq/Kconfig | 1 + drivers/iommu/iommufd/iommufd_private.h | 69 ++-- include/linux/iommu.h | 58 ++-- include/linux/iommufd.h | 6 + include/linux/msi.h | 43 ++- include/linux/vfio.h | 25 ++ include/uapi/linux/iommufd.h | 18 +- include/uapi/linux/vfio.h | 8 +- drivers/iommu/dma-iommu.c | 63 ++-- drivers/iommu/iommu.c | 29 ++ drivers/iommu/iommufd/device.c | 312 ++++++++++++++++-- drivers/iommu/iommufd/fault.c | 122 +------ drivers/iommu/iommufd/hw_pagetable.c | 5 +- drivers/iommu/iommufd/io_pagetable.c | 4 +- drivers/iommu/iommufd/ioas.c | 34 ++ drivers/iommu/iommufd/main.c | 15 + drivers/irqchip/irq-gic-v2m.c | 5 +- drivers/irqchip/irq-gic-v3-its.c | 13 +- drivers/irqchip/irq-gic-v3-mbi.c | 12 +- drivers/irqchip/irq-ls-scfg-msi.c | 5 +- drivers/vfio/iommufd.c | 27 ++ drivers/vfio/pci/vfio_pci_intrs.c | 46 +++ drivers/vfio/vfio_main.c | 3 + tools/testing/selftests/iommu/iommufd.c | 53 +++ .../selftests/iommu/iommufd_fail_nth.c | 14 + 27 files changed, 712 insertions(+), 283 deletions(-) -- 2.43.0

2 months, 2 weeks

10
63
0 0

[PATCH v2 0/2] tools/nolibc: add support for directory access

by Thomas Weißschuh

Add support opendir(), readdir_r(), closedir() and friends. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Changes in v2: - Move definitions to dirent.h - Reserve space for the trailing NULL byte of d_name - Implement readdir_r() instead of readdir() - Expand commit message - Link to v1: https://lore.kernel.org/r/20250130-nolibc-dir-v1-0-ea9950b52e29@weissschuh.… --- Thomas Weißschuh (2): tools/nolibc: add support for sys_llseek() tools/nolibc: add support for directory access tools/include/nolibc/Makefile | 1 + tools/include/nolibc/dirent.h | 98 ++++++++++++++++++++++++++++ tools/include/nolibc/nolibc.h | 1 + tools/include/nolibc/sys.h | 29 +++++++- tools/testing/selftests/nolibc/nolibc-test.c | 39 +++++++++++ 5 files changed, 167 insertions(+), 1 deletion(-) --- base-commit: c1f4a7a84037249d086a4114c0c4332a260e9091 change-id: 20250130-nolibc-dir-980c2e2b661a Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

2 months, 2 weeks

2
3
0 0

[PATCH] selftests: mm: Fixed typo

by Eric Salem

Fixed misspelling. Signed-off-by: Eric Salem <ericsalem(a)gmail.com> --- tools/testing/selftests/mm/uffd-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/uffd-common.c b/tools/testing/selftests/mm/uffd-common.c index 717539eddf98..f23c57d9d1bd 100644 --- a/tools/testing/selftests/mm/uffd-common.c +++ b/tools/testing/selftests/mm/uffd-common.c @@ -323,7 +323,7 @@ int uffd_test_ctx_init(uint64_t features, const char **errmsg) ret = userfaultfd_open(&features); if (ret) { if (errmsg) - *errmsg = "possible lack of priviledge"; + *errmsg = "possible lack of privilege"; return ret; } -- 2.48.1

2 months, 2 weeks

1
0
0 0

[PATCH v4 0/2] lib/prime_numbers: convert self-test to KUnit

by Tamir Duberstein

This is a clear example of a unit test. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 math-prime_numbers On success: ; [08:51:41] ============== math-prime_numbers (1 subtest) ============== ; [08:51:41] [PASSED] prime_numbers_test ; [08:51:41] =============== [PASSED] math-prime_numbers ================ ; [08:51:41] ============================================================ ; [08:51:41] Testing complete. Ran 1 tests: passed: 1 On failure: ; [08:50:19] ============== math-prime_numbers (1 subtest) ============== ; [08:50:19] # prime_numbers_test: ASSERTION FAILED at lib/math/tests/prime_numbers_kunit.c:28 ; [08:50:19] Expected slow == fast, but ; [08:50:19] slow == 0 (0x0) ; [08:50:19] fast == 1 (0x1) ; [08:50:19] is-prime(2) ; [08:50:19] [FAILED] prime_numbers_test ; [08:50:19] # module: prime_numbers_kunit ; [08:50:19] # math-prime_numbers: primes.{last=61, .sz=64, .primes[]=...x28208a20a08a28ac} = 2-3,5,7,11,13,17,19,23,29,31,37,41,43,47,53,59,61 ; [08:50:19] =============== [FAILED] math-prime_numbers ================ ; [08:50:19] ============================================================ ; [08:50:19] Testing complete. Ran 1 tests: failed: 1 Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v4: - Use `#if IS_ENABLED` to handle `CONFIG_PRIME_NUMBERS_KUNIT_TEST=m`. (Andrew Morton) - Link to v3: https://lore.kernel.org/r/20250208-prime_numbers-kunit-convert-v3-0-8ffd581… Changes in v3: - Remove `selftest_max` again; snuck into v2. - Restore `#include <linux/slab.h>`. - Sending v3 early because kernel test robot is sad. - Link to v2: https://lore.kernel.org/r/20250208-prime_numbers-kunit-convert-v2-0-8631194… Changes in v2: - Keep all the details hidden in prime_numbers.c; expose `with_primes` for debug logging in the test. (David Gow) - Link to v1: https://lore.kernel.org/r/20250207-prime_numbers-kunit-convert-v1-0-6067f2b… --- Tamir Duberstein (2): lib/math: Hook up tests/Makefile lib/prime_numbers: convert self-test to KUnit lib/Kconfig.debug | 14 +++++ lib/math/Makefile | 4 +- lib/math/prime_numbers.c | 76 ++++------------------------ lib/math/prime_numbers_private.h | 17 +++++++ lib/math/tests/Makefile | 1 + lib/math/tests/prime_numbers_kunit.c | 59 +++++++++++++++++++++ tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/prime_numbers.sh | 4 -- 8 files changed, 102 insertions(+), 74 deletions(-) --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250207-prime_numbers-kunit-convert-71c9b3c1d1d4 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

1
2
0 0

[PATCH v3 0/2] lib/prime_numbers: convert self-test to KUnit

by Tamir Duberstein

This is a clear example of a unit test. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 math-prime_numbers On success: ; [08:51:41] ============== math-prime_numbers (1 subtest) ============== ; [08:51:41] [PASSED] prime_numbers_test ; [08:51:41] =============== [PASSED] math-prime_numbers ================ ; [08:51:41] ============================================================ ; [08:51:41] Testing complete. Ran 1 tests: passed: 1 On failure: ; [08:50:19] ============== math-prime_numbers (1 subtest) ============== ; [08:50:19] # prime_numbers_test: ASSERTION FAILED at lib/math/tests/prime_numbers_kunit.c:28 ; [08:50:19] Expected slow == fast, but ; [08:50:19] slow == 0 (0x0) ; [08:50:19] fast == 1 (0x1) ; [08:50:19] is-prime(2) ; [08:50:19] [FAILED] prime_numbers_test ; [08:50:19] # module: prime_numbers_kunit ; [08:50:19] # math-prime_numbers: primes.{last=61, .sz=64, .primes[]=...x28208a20a08a28ac} = 2-3,5,7,11,13,17,19,23,29,31,37,41,43,47,53,59,61 ; [08:50:19] =============== [FAILED] math-prime_numbers ================ ; [08:50:19] ============================================================ ; [08:50:19] Testing complete. Ran 1 tests: failed: 1 Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v3: - Remove `selftest_max` again; snuck into v2. - Restore `#include <linux/slab.h>`. - Sending v3 early because kernel test robot is sad. - Link to v2: https://lore.kernel.org/r/20250208-prime_numbers-kunit-convert-v2-0-8631194… Changes in v2: - Keep all the details hidden in prime_numbers.c; expose `with_primes` for debug logging in the test. (David Gow) - Link to v1: https://lore.kernel.org/r/20250207-prime_numbers-kunit-convert-v1-0-6067f2b… --- Tamir Duberstein (2): lib/math: Hook up tests/Makefile lib/prime_numbers: convert self-test to KUnit lib/Kconfig.debug | 14 +++++ lib/math/Makefile | 4 +- lib/math/prime_numbers.c | 76 ++++------------------------ lib/math/prime_numbers_private.h | 17 +++++++ lib/math/tests/Makefile | 1 + lib/math/tests/prime_numbers_kunit.c | 59 +++++++++++++++++++++ tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/prime_numbers.sh | 4 -- 8 files changed, 102 insertions(+), 74 deletions(-) --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250207-prime_numbers-kunit-convert-71c9b3c1d1d4 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

2
4
0 0

[PATCH v2 0/2] lib/prime_numbers: convert self-test to KUnit

by Tamir Duberstein

This is a clear example of a unit test. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 math-prime_numbers On success: ; [08:51:41] ============== math-prime_numbers (1 subtest) ============== ; [08:51:41] [PASSED] prime_numbers_test ; [08:51:41] =============== [PASSED] math-prime_numbers ================ ; [08:51:41] ============================================================ ; [08:51:41] Testing complete. Ran 1 tests: passed: 1 On failure: ; [08:50:19] ============== math-prime_numbers (1 subtest) ============== ; [08:50:19] # prime_numbers_test: ASSERTION FAILED at lib/math/tests/prime_numbers_kunit.c:28 ; [08:50:19] Expected slow == fast, but ; [08:50:19] slow == 0 (0x0) ; [08:50:19] fast == 1 (0x1) ; [08:50:19] is-prime(2) ; [08:50:19] [FAILED] prime_numbers_test ; [08:50:19] # module: prime_numbers_kunit ; [08:50:19] # math-prime_numbers: primes.{last=61, .sz=64, .primes[]=...x28208a20a08a28ac} = 2-3,5,7,11,13,17,19,23,29,31,37,41,43,47,53,59,61 ; [08:50:19] =============== [FAILED] math-prime_numbers ================ ; [08:50:19] ============================================================ ; [08:50:19] Testing complete. Ran 1 tests: failed: 1 Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v2: - Keep all the details hidden in prime_numbers.c; expose `with_primes` for debug logging in the test. (David Gow) - Link to v1: https://lore.kernel.org/r/20250207-prime_numbers-kunit-convert-v1-0-6067f2b… --- Tamir Duberstein (2): lib/math: Hook up tests/Makefile lib/prime_numbers: convert self-test to KUnit lib/Kconfig.debug | 14 +++++ lib/math/Makefile | 4 +- lib/math/prime_numbers.c | 82 ++++------------------------ lib/math/prime_numbers_private.h | 17 ++++++ lib/math/tests/Makefile | 1 + lib/math/tests/prime_numbers_kunit.c | 59 ++++++++++++++++++++ tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/prime_numbers.sh | 4 -- 8 files changed, 104 insertions(+), 78 deletions(-) --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250207-prime_numbers-kunit-convert-71c9b3c1d1d4 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

2
6
0 0

Re: The business loan-

by David Song

Hello, My name is David Song, at AA4 FS, we are a consultancy and brokerage Firm specializing in Growth Financial Loan and joint partnership venture. We specialize in investments in all Private and public sectors in a broad range of areas within our Financial Investment Services. We are experts in financial and operational management, due diligence and capital planning in all markets and industries. Our Investors wish to invest in any viable Project presented by your Management after reviews on your Business Project Presentation Plan. We look forward to your Swift response. We also offer commission to consultants and brokers for any partnership referrals. Regards, David Song Senior Broker AA4 Financial Services 13 Wonersh Way, Cheam, Sutton, Surrey, SM2 7LX Email: dsong(a)aa4financialservice.com

2 months, 2 weeks

1
0
0 0

[PATCH 0/6] KUnit test moves / renames

by David Gow

As discussed in [1], the KUnit test naming scheme has changed to avoid name conflicts (and tab-completion woes) with the files being tested. These renames and moves have caused a nasty set of merge conflicts, so this series collates and rebases them all to be applied via mm-nonmm-unstable alongside any lib/ changes[2]. Thanks to everyone whose patches appear here, and everyone who reviewed on the original series. I hope I didn't break them too much during the rebase! Link: https://lore.kernel.org/lkml/20240720165441.it.320-kees@kernel.org/ [1] Link: https://lore.kernel.org/lkml/CABVgOSmbSzcGUi=E4piSojh3A4_0GjE0fAYbqKjtYGbE9… [2] --- Bruno Sobreira França (1): lib/math: Add int_log test suite Diego Vieira (1): lib/tests/kfifo_kunit.c: add tests for the kfifo structure Gabriela Bittencourt (2): unicode: kunit: refactor selftest to kunit tests unicode: kunit: change tests filename and path Kees Cook (1): lib: Move KUnit tests into tests/ subdirectory Luis Felipe Hernandez (1): lib: math: Move kunit tests into tests/ subdir MAINTAINERS | 19 +- arch/m68k/configs/amiga_defconfig | 2 +- arch/m68k/configs/apollo_defconfig | 2 +- arch/m68k/configs/atari_defconfig | 2 +- arch/m68k/configs/bvme6000_defconfig | 2 +- arch/m68k/configs/hp300_defconfig | 2 +- arch/m68k/configs/mac_defconfig | 2 +- arch/m68k/configs/multi_defconfig | 2 +- arch/m68k/configs/mvme147_defconfig | 2 +- arch/m68k/configs/mvme16x_defconfig | 2 +- arch/m68k/configs/q40_defconfig | 2 +- arch/m68k/configs/sun3_defconfig | 2 +- arch/m68k/configs/sun3x_defconfig | 2 +- arch/powerpc/configs/ppc64_defconfig | 2 +- fs/unicode/Kconfig | 5 +- fs/unicode/Makefile | 2 +- fs/unicode/tests/.kunitconfig | 3 + .../{utf8-selftest.c => tests/utf8_kunit.c} | 149 ++++++------ fs/unicode/utf8-norm.c | 2 +- lib/Kconfig.debug | 31 ++- lib/Makefile | 36 +-- lib/math/Makefile | 5 +- lib/math/tests/Makefile | 6 +- .../{test_div64.c => tests/div64_kunit.c} | 0 lib/math/tests/int_log_kunit.c | 75 ++++++ .../mul_u64_u64_div_u64_kunit.c} | 2 +- .../rational_kunit.c} | 0 lib/tests/Makefile | 39 +++ lib/{ => tests}/bitfield_kunit.c | 0 lib/{ => tests}/checksum_kunit.c | 0 lib/{ => tests}/cmdline_kunit.c | 0 lib/{ => tests}/cpumask_kunit.c | 0 lib/{ => tests}/fortify_kunit.c | 0 lib/{ => tests}/hashtable_test.c | 0 lib/{ => tests}/is_signed_type_kunit.c | 0 lib/tests/kfifo_kunit.c | 224 ++++++++++++++++++ lib/{ => tests}/kunit_iov_iter.c | 0 lib/{ => tests}/list-test.c | 0 lib/{ => tests}/memcpy_kunit.c | 0 lib/{ => tests}/overflow_kunit.c | 0 lib/{ => tests}/siphash_kunit.c | 0 lib/{ => tests}/slub_kunit.c | 0 lib/{ => tests}/stackinit_kunit.c | 0 lib/{ => tests}/string_helpers_kunit.c | 0 lib/{ => tests}/string_kunit.c | 0 lib/{ => tests}/test_bits.c | 0 lib/{ => tests}/test_fprobe.c | 0 lib/{ => tests}/test_hash.c | 0 lib/{ => tests}/test_kprobes.c | 0 lib/{ => tests}/test_linear_ranges.c | 0 lib/{ => tests}/test_list_sort.c | 0 lib/{ => tests}/test_sort.c | 0 lib/{ => tests}/usercopy_kunit.c | 0 53 files changed, 474 insertions(+), 150 deletions(-) create mode 100644 fs/unicode/tests/.kunitconfig rename fs/unicode/{utf8-selftest.c => tests/utf8_kunit.c} (64%) rename lib/math/{test_div64.c => tests/div64_kunit.c} (100%) create mode 100644 lib/math/tests/int_log_kunit.c rename lib/math/{test_mul_u64_u64_div_u64.c => tests/mul_u64_u64_div_u64_kunit.c} (98%) rename lib/math/{rational-test.c => tests/rational_kunit.c} (100%) create mode 100644 lib/tests/Makefile rename lib/{ => tests}/bitfield_kunit.c (100%) rename lib/{ => tests}/checksum_kunit.c (100%) rename lib/{ => tests}/cmdline_kunit.c (100%) rename lib/{ => tests}/cpumask_kunit.c (100%) rename lib/{ => tests}/fortify_kunit.c (100%) rename lib/{ => tests}/hashtable_test.c (100%) rename lib/{ => tests}/is_signed_type_kunit.c (100%) create mode 100644 lib/tests/kfifo_kunit.c rename lib/{ => tests}/kunit_iov_iter.c (100%) rename lib/{ => tests}/list-test.c (100%) rename lib/{ => tests}/memcpy_kunit.c (100%) rename lib/{ => tests}/overflow_kunit.c (100%) rename lib/{ => tests}/siphash_kunit.c (100%) rename lib/{ => tests}/slub_kunit.c (100%) rename lib/{ => tests}/stackinit_kunit.c (100%) rename lib/{ => tests}/string_helpers_kunit.c (100%) rename lib/{ => tests}/string_kunit.c (100%) rename lib/{ => tests}/test_bits.c (100%) rename lib/{ => tests}/test_fprobe.c (100%) rename lib/{ => tests}/test_hash.c (100%) rename lib/{ => tests}/test_kprobes.c (100%) rename lib/{ => tests}/test_linear_ranges.c (100%) rename lib/{ => tests}/test_list_sort.c (100%) rename lib/{ => tests}/test_sort.c (100%) rename lib/{ => tests}/usercopy_kunit.c (100%) -- 2.47.0.rc1.288.g06298d1525-goog

2 months, 2 weeks

10
24
0 0

[PATCH v14 00/15] PCI: EP: Add RC-to-EP doorbell with platform MSI controller

by Frank Li

┌────────────┐ ┌───────────────────────────────────┐ ┌────────────────┐ │ │ │ │ │ │ │ │ │ PCI Endpoint │ │ PCI Host │ │ │ │ │ │ │ │ │◄──┤ 1.platform_msi_domain_alloc_irqs()│ │ │ │ │ │ │ │ │ │ MSI ├──►│ 2.write_msi_msg() ├──►├─BAR<n> │ │ Controller │ │ update doorbell register address│ │ │ │ │ │ for BAR │ │ │ │ │ │ │ │ 3. Write BAR<n>│ │ │◄──┼───────────────────────────────────┼───┤ │ │ │ │ │ │ │ │ ├──►│ 4.Irq Handle │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ └────────────┘ └───────────────────────────────────┘ └────────────────┘ This patches based on old https://lore.kernel.org/imx/20221124055036.1630573-1-Frank.Li@nxp.com/ Original patch only target to vntb driver. But actually it is common method. This patches add new API to pci-epf-core, so any EP driver can use it. Previous v2 discussion here. https://lore.kernel.org/imx/20230911220920.1817033-1-Frank.Li@nxp.com/ Changes in v14: Marc Zyngier raised concerns about adding DOMAIN_BUS_DEVICE_PCI_EP_MSI. As a result, the approach has been reverted to the v9 method. However, there are several improvements: MSI now supports msi-map in addition to msi-parent. - The struct device: id is used as the endpoint function (EPF) device identity to map to the stream ID (sideband information). - The EPC device tree source (DTS) utilizes msi-map to provide such information. - The EPF device's of_node is set to the EPC controller’s node. This approach is commonly used for multi-function device (MFD) platform child devices, allowing them to inherit properties from the MFD device’s DTS, such as reset-cells and gpio-cells. This method is well-suited for the current case, as the EPF is inherently created/binded to the EPC and should inherit the EPC’s DTS node properties. Additionally: Since the basic IMX95 LUT support has already been merged into the mainline, a DTS and driver increment patch is added to complete the solution. The patch is rebased onto the latest linux-next tree and aligned with the new pcitest framework. - Link to v13: https://lore.kernel.org/r/20241218-ep-msi-v13-0-646e2192dc24@nxp.com Changes in v13: - Change to use DOMAIN_BUS_PCI_DEVICE_EP_MSI - Change request id as func | vfunc << 3 - Remove IRQ_DOMAIN_MSI_IMMUTABLE Thomas Gleixner: I hope capture all your points in review comments. If missed, let me know. - Link to v12: https://lore.kernel.org/r/20241211-ep-msi-v12-0-33d4532fa520@nxp.com Changes in v12: - Change to use IRQ_DOMAIN_MSI_IMMUTABLE and add help function irq_domain_msi_is_immuatble(). - split PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check to 3 patches - Link to v11: https://lore.kernel.org/r/20241209-ep-msi-v11-0-7434fa8397bd@nxp.com Changes in v11: - Change to use MSI_FLAG_MSG_IMMUTABLE - Link to v10: https://lore.kernel.org/r/20241204-ep-msi-v10-0-87c378dbcd6d@nxp.com Changes in v10: Thomas Gleixner: There are big change in pci-ep-msi.c. I am sure if go on the corrent path. The key improvement is remove only 1 function devices's limitation. I use new patch for imutable check, which relative additional feature compared to base enablement patch. - Remove patch Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all() - Add new patch irqchip/gic-v3-its: Avoid overwriting msi_prepare callback if provided by msi_domain_info - Remove only support 1 endpoint function limiation. - Create one MSI domain for each endpoint function devices. - Use "msi-map" in pci ep controler node, instead of of msi-parent. first argument is (func_no << 8 | vfunc_no) - Link to v9: https://lore.kernel.org/r/20241203-ep-msi-v9-0-a60dbc3f15dd@nxp.com Changes in v9 - Add patch platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all() - Remove patch PCI: endpoint: Add pci_epc_get_fn() API for customizable filtering - Remove API pci_epf_align_inbound_addr_lo_hi - Move doorbell_alloc in to doorbell_enable function. - Link to v8: https://lore.kernel.org/r/20241116-ep-msi-v8-0-6f1f68ffd1bb@nxp.com Changes in v8: - update helper function name to pci_epf_align_inbound_addr() - Link to v7: https://lore.kernel.org/r/20241114-ep-msi-v7-0-d4ac7aafbd2c@nxp.com Changes in v7: - Add helper function pci_epf_align_addr(); - Link to v6: https://lore.kernel.org/r/20241112-ep-msi-v6-0-45f9722e3c2a@nxp.com Changes in v6: - change doorbell_addr to doorbell_offset - use round_down() - add Niklas's test by tag - rebase to pci/endpoint - Link to v5: https://lore.kernel.org/r/20241108-ep-msi-v5-0-a14951c0d007@nxp.com Changes in v5: - Move request_irq to epf test function driver for more flexiable user case - Add fixed size bar handler - Some minor improvememtn to see each patches's changelog. - Link to v4: https://lore.kernel.org/r/20241031-ep-msi-v4-0-717da2d99b28@nxp.com Changes in v4: - Remove patch genirq/msi: Add cleanup guard define for msi_lock_descs()/msi_unlock_descs() - Use new method to avoid compatible problem. Add new command DOORBELL_ENABLE and DOORBELL_DISABLE. pcitest -B send DOORBELL_ENABLE first, EP test function driver try to remap one of BAR_N (except test register bar) to ITS MSI MMIO space. Old driver don't support new command, so failure return, not side effect. After test, DOORBELL_DISABLE command send out to recover original map, so pcitest bar test can pass as normal. - Other detail change see each patches's change log - Link to v3: https://lore.kernel.org/r/20241015-ep-msi-v3-0-cedc89a16c1a@nxp.com Change from v2 to v3 - Fixed manivannan's comments - Move common part to pci-ep-msi.c and pci-ep-msi.h - rebase to 6.12-rc1 - use RevID to distingiush old version mkdir /sys/kernel/config/pci_ep/functions/pci_epf_test/func1 echo 16 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/msi_interrupts echo 0x080c > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/deviceid echo 0x1957 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/vendorid echo 1 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/revid ^^^^^^ to enable platform msi support. ln -s /sys/kernel/config/pci_ep/functions/pci_epf_test/func1 /sys/kernel/config/pci_ep/controllers/4c380000.pcie-ep - use new device ID, which identify support doorbell to avoid broken compatility. Enable doorbell support only for PCI_DEVICE_ID_IMX8_DB, while other devices keep the same behavior as before. EP side RC with old driver RC with new driver PCI_DEVICE_ID_IMX8_DB no probe doorbell enabled Other device ID doorbell disabled* doorbell disabled* * Behavior remains unchanged. Change from v1 to v2 - Add missed patch for endpont/pci-epf-test.c - Move alloc and free to epc driver from epf. - Provide general help function for EPC driver to alloc platform msi irq. - Fixed manivannan's comments. Signed-off-by: Frank Li <Frank.Li(a)nxp.com> --- Frank Li (15): platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all() irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable() irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask PCI: endpoint: Set ID and of_node for function driver PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment PCI: endpoint: pci-epf-test: Add doorbell test support misc: pci_endpoint_test: Add doorbell test case selftests: pci_endpoint: Add doorbell test case pci: imx6: Add helper function imx_pcie_add_lut_by_rid() pci: imx6: Add LUT setting for MSI/IOMMU in Endpoint mode arm64: dts: imx95: Add msi-map for pci-ep device arm64: dts: imx95-19x19-evk: Add PCIe1 endpoint function overlay file arch/arm64/boot/dts/freescale/Makefile | 3 + .../dts/freescale/imx95-19x19-evk-pcie1-ep.dtso | 21 ++++ arch/arm64/boot/dts/freescale/imx95.dtsi | 1 + drivers/base/platform-msi.c | 1 + drivers/irqchip/irq-gic-v3-its-msi-parent.c | 8 ++ drivers/irqchip/irq-gic-v3-its.c | 2 +- drivers/misc/pci_endpoint_test.c | 81 +++++++++++++ drivers/pci/controller/dwc/pci-imx6.c | 25 ++-- drivers/pci/endpoint/Makefile | 2 +- drivers/pci/endpoint/functions/pci-epf-test.c | 132 +++++++++++++++++++++ drivers/pci/endpoint/pci-ep-msi.c | 89 ++++++++++++++ drivers/pci/endpoint/pci-epf-core.c | 48 ++++++++ include/linux/irqdomain.h | 7 ++ include/linux/pci-ep-msi.h | 26 ++++ include/linux/pci-epf.h | 21 ++++ include/uapi/linux/pcitest.h | 1 + .../selftests/pci_endpoint/pci_endpoint_test.c | 25 ++++ 17 files changed, 483 insertions(+), 10 deletions(-) --- base-commit: 00f3246adeeacbda0bd0b303604e46eb59c32e6e change-id: 20241010-ep-msi-8b4cab33b1be Best regards, --- Frank Li <Frank.Li(a)nxp.com>

2 months, 2 weeks

2
18
0 0

[PATCH 0/2] lib/prime_numbers: convert self-test to KUnit

by Tamir Duberstein

This is a clear example of a unit test. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 math-prime_numbers ; KTAP version 1 ; 1..1 ; KTAP version 1 ; # Subtest: math-prime_numbers ; # module: prime_numbers_kunit ; 1..1 ; # prime_numbers_test: prime_numbers_test(65536) passed, last prime was 65521 ; # prime_numbers_test: primes.{last=61, .sz=64, .primes[]=...x28208a20a08a28ac} = 2-3,5,7,11,13,17,19,23,29,31,37,41,43,47,53,59,61 ; ; ok 1 prime_numbers_test ; ok 1 math-prime_numbers Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Tamir Duberstein (2): lib/math: Hook up tests/Makefile lib/prime_numbers: convert self-test to KUnit lib/Kconfig.debug | 14 +++ lib/math/Makefile | 4 +- lib/math/prime_numbers.c | 151 +-------------------------- lib/math/prime_numbers_private.h | 64 ++++++++++++ lib/math/tests/Makefile | 1 + lib/math/tests/prime_numbers_kunit.c | 92 ++++++++++++++++ tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/prime_numbers.sh | 4 - 8 files changed, 175 insertions(+), 156 deletions(-) --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250207-prime_numbers-kunit-convert-71c9b3c1d1d4 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

2
4
0 0

[PATCH net-next v5 0/3] netdev-genl: Add an xsk attribute to queues

by Joe Damato

Greetings Welcome to v5. No functional changes; removed an unused variable from patch 2. This is an attempt to followup on something Jakub asked me about [1], adding an xsk attribute to queues and more clearly documenting which queues are linked to NAPIs... After the RFC [2], Jakub suggested creating an empty nest for queues which have a pool, so I've adjusted this version to work that way. The nest can be extended in the future to express attributes about XSK as needed. Queues which are not used for AF_XDP do not have the xsk attribute present. I've run the included test on: - my mlx5 machine (via NETIF=) - without setting NETIF And the test seems to pass in both cases. Thanks, Joe [1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/ [2]: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ v5: - Removed unused ret variable from patch 2 as Simon suggested. v4: https://lore.kernel.org/lkml/20250207030916.32751-1-jdamato@fastly.com/ - Add patch 1, as suggested by Jakub, which adds an empty nest helper. - Use the helper in patch 2, which makes the code cleaner and prevents a possible bug. v3: https://lore.kernel.org/netdev/20250204191108.161046-1-jdamato@fastly.com/ - Change comment format in patch 2 to avoid kdoc warnings. No other changes. v2: https://lore.kernel.org/all/20250203185828.19334-1-jdamato@fastly.com/ - Switched from RFC to actual submission now that net-next is open - Adjusted patch 1 to include an empty nest as suggested by Jakub - Adjusted patch 2 to update the test based on changes to patch 1, and to incorporate some Python feedback from Jakub :) rfc: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ Joe Damato (3): netlink: Add nla_put_empty_nest helper netdev-genl: Add an XSK attribute to queues selftests: drv-net: Test queue xsk attribute Documentation/netlink/specs/netdev.yaml | 13 ++- include/net/netlink.h | 15 ++++ include/uapi/linux/netdev.h | 6 ++ net/core/netdev-genl.c | 11 +++ tools/include/uapi/linux/netdev.h | 6 ++ .../testing/selftests/drivers/net/.gitignore | 2 + tools/testing/selftests/drivers/net/Makefile | 3 + tools/testing/selftests/drivers/net/queues.py | 35 +++++++- .../selftests/drivers/net/xdp_helper.c | 89 +++++++++++++++++++ 9 files changed, 177 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/.gitignore create mode 100644 tools/testing/selftests/drivers/net/xdp_helper.c base-commit: 233a2b1480a0bdf6b40d4debf58a07084e9921ff -- 2.43.0

2 months, 2 weeks

1
1
0 0

[PATCH bpf-next] selftests/bpf: Remove with_addr.sh and with_tunnels.sh

by Bastien Curutchet (eBPF Foundation)

Those two scripts were used by test_flow_dissector.sh to setup/cleanup the network topology before/after the tests. test_flow_dissector.sh have been deleted by commit 63b37657c5fd ("selftests/bpf: remove test_flow_dissector.sh") so they aren't used anywhere now. Remove the two unused scripts and their Makefile entries. Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com> --- tools/testing/selftests/bpf/Makefile | 4 +-- tools/testing/selftests/bpf/with_addr.sh | 54 ----------------------------- tools/testing/selftests/bpf/with_tunnels.sh | 36 ------------------- 3 files changed, 2 insertions(+), 92 deletions(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 6722080b2107a56c1500bab4d7b638f5bcde2a82..e9dfd96fa48c98a736c7b39356757b1b3680220a 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -117,8 +117,8 @@ TEST_PROGS := test_kmod.sh \ test_xsk.sh \ test_xdp_features.sh -TEST_PROGS_EXTENDED := with_addr.sh \ - with_tunnels.sh ima_setup.sh verify_sig_setup.sh \ +TEST_PROGS_EXTENDED := \ + ima_setup.sh verify_sig_setup.sh \ test_xdp_vlan.sh test_bpftool.py TEST_KMODS := bpf_testmod.ko bpf_test_no_cfi.ko bpf_test_modorder_x.ko \ diff --git a/tools/testing/selftests/bpf/with_addr.sh b/tools/testing/selftests/bpf/with_addr.sh deleted file mode 100755 index ffcd3953f94cf2301f0e5158d141ccb48b2fb1c0..0000000000000000000000000000000000000000 --- a/tools/testing/selftests/bpf/with_addr.sh +++ /dev/null @@ -1,54 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -# add private ipv4 and ipv6 addresses to loopback - -readonly V6_INNER='100::a/128' -readonly V4_INNER='192.168.0.1/32' - -if getopts ":s" opt; then - readonly SIT_DEV_NAME='sixtofourtest0' - readonly V6_SIT='2::/64' - readonly V4_SIT='172.17.0.1/32' - shift -fi - -fail() { - echo "error: $*" 1>&2 - exit 1 -} - -setup() { - ip -6 addr add "${V6_INNER}" dev lo || fail 'failed to setup v6 address' - ip -4 addr add "${V4_INNER}" dev lo || fail 'failed to setup v4 address' - - if [[ -n "${V6_SIT}" ]]; then - ip link add "${SIT_DEV_NAME}" type sit remote any local any \ - || fail 'failed to add sit' - ip link set dev "${SIT_DEV_NAME}" up \ - || fail 'failed to bring sit device up' - ip -6 addr add "${V6_SIT}" dev "${SIT_DEV_NAME}" \ - || fail 'failed to setup v6 SIT address' - ip -4 addr add "${V4_SIT}" dev "${SIT_DEV_NAME}" \ - || fail 'failed to setup v4 SIT address' - fi - - sleep 2 # avoid race causing bind to fail -} - -cleanup() { - if [[ -n "${V6_SIT}" ]]; then - ip -4 addr del "${V4_SIT}" dev "${SIT_DEV_NAME}" - ip -6 addr del "${V6_SIT}" dev "${SIT_DEV_NAME}" - ip link del "${SIT_DEV_NAME}" - fi - - ip -4 addr del "${V4_INNER}" dev lo - ip -6 addr del "${V6_INNER}" dev lo -} - -trap cleanup EXIT - -setup -"$@" -exit "$?" diff --git a/tools/testing/selftests/bpf/with_tunnels.sh b/tools/testing/selftests/bpf/with_tunnels.sh deleted file mode 100755 index e24949ed3a20813e34bd69bdd634b0f32b7a26e9..0000000000000000000000000000000000000000 --- a/tools/testing/selftests/bpf/with_tunnels.sh +++ /dev/null @@ -1,36 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -# setup tunnels for flow dissection test - -readonly SUFFIX="test_$(mktemp -u XXXX)" -CONFIG="remote 127.0.0.2 local 127.0.0.1 dev lo" - -setup() { - ip link add "ipip_${SUFFIX}" type ipip ${CONFIG} - ip link add "gre_${SUFFIX}" type gre ${CONFIG} - ip link add "sit_${SUFFIX}" type sit ${CONFIG} - - echo "tunnels before test:" - ip tunnel show - - ip link set "ipip_${SUFFIX}" up - ip link set "gre_${SUFFIX}" up - ip link set "sit_${SUFFIX}" up -} - - -cleanup() { - ip tunnel del "ipip_${SUFFIX}" - ip tunnel del "gre_${SUFFIX}" - ip tunnel del "sit_${SUFFIX}" - - echo "tunnels after test:" - ip tunnel show -} - -trap cleanup EXIT - -setup -"$@" -exit "$?" --- base-commit: ab4839cd3b4d65bffd574035a02568809c54a5b6 change-id: 20250130-with-388b72afcbc0 Best regards, -- Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com>

2 months, 2 weeks

2
1
0 0

[PATCH v2 bpf 0/2] bpf: skip non exist keys in

by Yan Zhai

generic_map_lookup_batch The generic_map_lookup_batch currently returns EINTR if it fails with ENOENT and retries several times on bpf_map_copy_value. The next batch would start from the same location, presuming it's a transient issue. This is incorrect if a map can actually have "holes", i.e. "get_next_key" can return a key that does not point to a valid value. At least the array of maps type may contain such holes legitly. Right now these holes show up, generic batch lookup cannot proceed any more. It will always fail with EINTR errors. This patch fixes this behavior by skipping the non-existing key, and does not return EINTR any more. V1->V2: split the fix and selftests; fixed a few selftests issues. V1: https://lore.kernel.org/bpf/Z6OYbS4WqQnmzi2z@debian.debian/ Yan Zhai (2): bpf: skip non exist keys in generic_map_lookup_batch selftests: bpf: test batch lookup on array of maps with holes kernel/bpf/syscall.c | 16 ++--- .../bpf/map_tests/map_in_map_batch_ops.c | 62 +++++++++++++------ 2 files changed, 49 insertions(+), 29 deletions(-) -- 2.39.5

2 months, 2 weeks

3
5
0 0

[PATCH bpf-next v2 0/3] bpf: Some fixes for nullness elision

by Daniel Xu

Two fixes for nullness elision. See commits for more details. === Changelog === Changes from v1: * Reword commit message in patch 1 * Add tags Daniel Xu (3): bpf: verifier: Do not extract constant map keys for irrelevant maps bpf: selftests: Test constant key extraction on irrelevant maps bpf: verifier: Disambiguate get_constant_map_key() errors kernel/bpf/verifier.c | 29 ++++++++++++++----- .../bpf/progs/verifier_array_access.c | 15 ++++++++++ 2 files changed, 36 insertions(+), 8 deletions(-) -- 2.47.1

2 months, 2 weeks

2
2
0 0

[PATCH 00/21] bcachefs: eytzinger code

by Andreas Gruenbacher

Kent, to continue our discussion from last November, I've gone through more parts of the eytzinger code and as a result, here are some patches for you to consider. What I've not looked at are the eytzinger_to_inorder and inorder_to_eytzinger functions, as well as the implementation of sort. Those functions could use a bit more documentation, but the code iself looks reasonable. Shuah, I've also had a quick look at converting the tests into kernel selftests, but that hasn't gone very far because of the lack of support for basic functions like __fls(), __ffs(), ffz(), and rounddown_pow_of_two() in selftests. Are there any plans for making those kinds of primitives generally available to selftests? Thanks, Andreas Andreas Gruenbacher (21): bcachefs: remove dead code in is_aligned bcachefs: bch2_blacklist_entries_gc cleanup bcachefs: Run the eytzinger tests on modprobe bcachefs: EYTZINGER_DEBUG fix bcachefs: eytzinger self tests: eytzinger0_for_each loop cleanups bcachefs: eytzinger self tests: missing newline termination bcachefs: eytzinger self tests: fix cmp_u16 typo bcachefs: eytzinger[01]_test improvement bcachefs: eytzinger0_find_test improvement bcachefs: add eytzinger0_for_each_prev bcachefs: improve the eytzinger0_find_le tests bcachefs: convert eytzinger0_find to be 1-based bcachefs: convert eytzinger0_find_le to be 1-based bcachefs: simplify eytzinger0_find_le bcachefs: add eytzinger0_find_gt tests bcachefs: implement eytzinger0_find_gt directly bcachefs: add eytzinger0_find_ge tests bcachefs: implement eytzinger0_find_ge directly bcachefs: convert eytzinger sort to be 1-based (1) bcachefs: convert eytzinger sort to be 1-based (2) bcachefs: eytzinger1_{next,prev} cleanup fs/bcachefs/eytzinger.c | 89 +++++++------- fs/bcachefs/eytzinger.h | 99 +++++++-------- fs/bcachefs/journal_seq_blacklist.c | 7 +- fs/bcachefs/super.c | 5 + fs/bcachefs/util.c | 183 +++++++++++++++++++++------- fs/bcachefs/util.h | 4 + 6 files changed, 240 insertions(+), 147 deletions(-) -- 2.48.1

2 months, 2 weeks

3
36
0 0

[PATCH net-next 2/7] selftests: net-drv: test adding flow rule to invalid RSS context

by Jakub Kicinski

Check that adding Rx flow steering rules pointing to an RSS context which does not exist is prevented. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: willemb(a)google.com CC: linux-kselftest(a)vger.kernel.org --- .../selftests/drivers/net/hw/rss_ctx.py | 27 ++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/drivers/net/hw/rss_ctx.py b/tools/testing/selftests/drivers/net/hw/rss_ctx.py index 319aaa004c40..7e5f4602e6b3 100755 --- a/tools/testing/selftests/drivers/net/hw/rss_ctx.py +++ b/tools/testing/selftests/drivers/net/hw/rss_ctx.py @@ -4,7 +4,8 @@ import datetime import random import re -from lib.py import ksft_run, ksft_pr, ksft_exit, ksft_eq, ksft_ne, ksft_ge, ksft_lt, ksft_true +from lib.py import ksft_run, ksft_pr, ksft_exit +from lib.py import ksft_eq, ksft_ne, ksft_ge, ksft_in, ksft_lt, ksft_true, ksft_raises from lib.py import NetDrvEpEnv from lib.py import EthtoolFamily, NetdevFamily from lib.py import KsftSkipEx, KsftFailEx @@ -649,6 +650,29 @@ from lib.py import ethtool, ip, defer, GenerateTraffic, CmdExitFailure test_rss_context_overlap(cfg, True) +def test_flow_add_context_missing(cfg): + """ + Test that we are not allowed to add a rule pointing to an RSS context + which was never created. + """ + + require_ntuple(cfg) + + # Find a context which doesn't exist + for ctx_id in range(1, 100): + try: + get_rss(cfg, context=ctx_id) + except CmdExitFailure: + break + + with ksft_raises(CmdExitFailure) as cm: + flow = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port 1234 context {ctx_id}" + ntuple_id = ethtool_create(cfg, "-N", flow) + ethtool(f"-N {cfg.ifname} delete {ntuple_id}") + if cm.exception: + ksft_in('Invalid argument', cm.exception.cmd.stderr) + + def test_delete_rss_context_busy(cfg): """ Test that deletion returns -EBUSY when an rss context is being used @@ -726,6 +750,7 @@ from lib.py import ethtool, ip, defer, GenerateTraffic, CmdExitFailure test_rss_context_dump, test_rss_context_queue_reconfigure, test_rss_context_overlap, test_rss_context_overlap2, test_rss_context_out_of_order, test_rss_context4_create_with_cfg, + test_flow_add_context_missing, test_delete_rss_context_busy, test_rss_ntuple_addition], args=(cfg, )) ksft_exit() -- 2.48.1

2 months, 2 weeks

3
2
0 0

[PATCH] kselftest/arm64: Fix uninitialized variable warning in FPMR test

by Breno Leitao

Fix compiler warning about potentially uninitialized orig_fpmr variable: testcases/fpmr_siginfo.c: In function ‘fpmr_present’: testcases/fpmr_siginfo.c:68:25: warning: ‘orig_fpmr’ may be used uninitialized in this function [-Wmaybe-uninitialized] fprintf(stderr, "FPMR in frame is %llx, was %llx\n", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ fpmr_ctx->fpmr, orig_fpmr); ~~~~~~~~~~~~~~~~~~~~~~~~~~ Initialize orig_fpmr to 0 to resolve the warning. Signed-off-by: Breno Leitao <leitao(a)debian.org> --- tools/testing/selftests/arm64/signal/testcases/fpmr_siginfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/arm64/signal/testcases/fpmr_siginfo.c b/tools/testing/selftests/arm64/signal/testcases/fpmr_siginfo.c index e9d24685e74194fc4ed1aebdcfd4c6edd3488e1b..26818860b223d367955d96e12d423fadc304700b 100644 --- a/tools/testing/selftests/arm64/signal/testcases/fpmr_siginfo.c +++ b/tools/testing/selftests/arm64/signal/testcases/fpmr_siginfo.c @@ -40,10 +40,10 @@ int fpmr_present(struct tdescr *td, siginfo_t *si, ucontext_t *uc) { struct _aarch64_ctx *head = GET_BUF_RESV_HEAD(context); struct fpmr_context *fpmr_ctx; + __u64 orig_fpmr = 0; size_t offset; bool in_sigframe; bool have_fpmr; - __u64 orig_fpmr; have_fpmr = getauxval(AT_HWCAP2) & HWCAP2_FPMR; if (have_fpmr) --- base-commit: 0d5248724ed8bc68c867c4c65dda625277f68fbc change-id: 20250207-arm_fix_selftest-ee29dbc33a06 Best regards, -- Breno Leitao <leitao(a)debian.org>

2 months, 2 weeks

2
3
0 0

[PATCH v5 0/5] arm64: Support 2024 dpISA extensions

by Mark Brown

The 2024 architecture release includes a number of data processing extensions, mostly SVE and SME additions with a few others. These are all very straightforward extensions which add instructions but no architectural state so only need hwcaps and exposing of the ID registers to KVM guests and userspace. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v5: - Rebase onto arm64/for-next/cpufeature, which incorporates most of the sysreg updates from earlier versions. - Remove SF8MM8 and SF8MM4 register defintitions which were removed from the ISA in the 2024-12 XML release, along with their associated hwcaps. - Incorporate Marc's fix for SVE hwcaps on SME only systems and update the hwcaps for the newly added features to follow the same pattern. - Link to v4: https://lore.kernel.org/r/20241211-arm64-2024-dpisa-v4-0-0fd403876df2@kerne… Changes in v4: - Fix encodings for ID_AA64ISAR3_EL1. - Link to v3: https://lore.kernel.org/r/20241203-arm64-2024-dpisa-v3-0-a6c78b1aa297@kerne… Changes in v3: - Commit log update for the hwcap test. - Link to v2: https://lore.kernel.org/r/20241030-arm64-2024-dpisa-v2-0-b6601a15d2a5@kerne… Changes in v2: - Filter KVM guest visible bitfields in ID_AA64ISAR3_EL1 to only those we make writeable. - Link to v1: https://lore.kernel.org/r/20241028-arm64-2024-dpisa-v1-0-a38d08b008a8@kerne… --- Marc Zyngier (1): arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented Mark Brown (4): arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12 arm64/hwcap: Describe 2024 dpISA extensions to userspace KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1 kselftest/arm64: Add 2024 dpISA extensions to hwcap test Documentation/arch/arm64/elf_hwcaps.rst | 89 +++++++++-- arch/arm64/include/asm/hwcap.h | 15 ++ arch/arm64/include/uapi/asm/hwcap.h | 15 ++ arch/arm64/kernel/cpufeature.c | 71 +++++++-- arch/arm64/kernel/cpuinfo.c | 15 ++ arch/arm64/kvm/sys_regs.c | 6 +- arch/arm64/tools/sysreg | 26 +++- tools/testing/selftests/arm64/abi/hwcap.c | 235 +++++++++++++++++++++++++++++- 8 files changed, 441 insertions(+), 31 deletions(-) --- base-commit: d66e21d59ed0e043e68ef8c6541c1e9f1a962614 change-id: 20241008-arm64-2024-dpisa-8091074a7f48 Best regards, -- Mark Brown <broonie(a)kernel.org>

2 months, 2 weeks

4
9
0 0

[PATCH net-next 4/4] selftests: test_vxlan_fdb_changelink: Add a test for MC remote change

by Petr Machata

Changes to MC remote need to be reflected in actual group memberships. Add a test to verify that it is the case. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> --- Notes: CC: Simon Horman <horms(a)kernel.org> CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org .../net/test_vxlan_fdb_changelink.sh | 76 +++++++++++++++++++ 1 file changed, 76 insertions(+) diff --git a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh index 6f2bca4b346c..062f957950af 100755 --- a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh +++ b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh @@ -3,6 +3,7 @@ ALL_TESTS=" test_set_remote + test_change_mc_remote " source lib.sh @@ -31,6 +32,81 @@ test_set_remote() log_test 'FDB default-remote handling across "ip link set"' } +fmt_remote() +{ + local addr=$1; shift + + if [[ $addr == 224.* ]]; then + echo "group $addr" + else + echo "remote $addr" + fi +} + +change_remote() +{ + local remote=$1; shift + + ip link set dev vx type vxlan $(fmt_remote $remote) dev v1 +} + +check_membership() +{ + local check_vec=("$@") + + local memberships + memberships=$( + netstat -n --groups | + sed -n '/^v1\b/p' | + grep -o '[^ ]*$' + ) + check_err $? "Couldn't obtain group memberships" + + local item + for item in "${check_vec[@]}"; do + eval "local $item" + echo "$memberships" | grep -q "\b$group\b" + check_err_fail $fail $? "$group is_ex reported in IGMP query response" + done +} + +test_change_mc_remote() +{ + check_command netstat || return + + ip_link_add v1 up type veth peer name v2 + ip_link_set_up v2 + + RET=0 + + ip_link_add vx up type vxlan dstport 4789 \ + local 192.0.2.1 $(fmt_remote 224.1.1.1) dev v1 vni 1000 + + check_membership "group=224.1.1.1 fail=0" \ + "group=224.1.1.2 fail=1" \ + "group=224.1.1.3 fail=1" + + log_test "MC group report after VXLAN creation" + + RET=0 + + change_remote 224.1.1.2 + check_membership "group=224.1.1.1 fail=1" \ + "group=224.1.1.2 fail=0" \ + "group=224.1.1.3 fail=1" + + log_test "MC group report after changing VXLAN remote MC->MC" + + RET=0 + + change_remote 192.0.2.2 + check_membership "group=224.1.1.1 fail=1" \ + "group=224.1.1.2 fail=1" \ + "group=224.1.1.3 fail=1" + + log_test "MC group report after changing VXLAN remote MC->UC" +} + trap defer_scopes_cleanup EXIT tests_run -- 2.47.0

2 months, 2 weeks

1
0
0 0

[PATCH net-next 3/4] selftests: test_vxlan_fdb_changelink: Convert to lib.sh

by Petr Machata

Instead of inlining equivalents, use lib.sh-provided primitives. Use defer to manage vx lifetime. This will make it easier to extend the test in the next patch. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> --- Notes: CC: Simon Horman <horms(a)kernel.org> CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org .../net/test_vxlan_fdb_changelink.sh | 39 ++++++++++++------- 1 file changed, 24 insertions(+), 15 deletions(-) diff --git a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh index 2d442cdab11e..6f2bca4b346c 100755 --- a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh +++ b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh @@ -1,29 +1,38 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -# Check FDB default-remote handling across "ip link set". +ALL_TESTS=" + test_set_remote +" +source lib.sh check_remotes() { local what=$1; shift local N=$(bridge fdb sh dev vx | grep 00:00:00:00:00:00 | wc -l) - echo -ne "expected two remotes after $what\t" - if [[ $N != 2 ]]; then - echo "[FAIL]" - EXIT_STATUS=1 - else - echo "[ OK ]" - fi + ((N == 2)) + check_err $? "expected 2 remotes after $what, got $N" } -ip link add name vx up type vxlan id 2000 dstport 4789 -bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent -bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent -check_remotes "fdb append" +# Check FDB default-remote handling across "ip link set". +test_set_remote() +{ + RET=0 -ip link set dev vx type vxlan remote 192.0.2.30 -check_remotes "link set" + ip_link_add vx up type vxlan id 2000 dstport 4789 + bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent + bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent + check_remotes "fdb append" + + ip link set dev vx type vxlan remote 192.0.2.30 + check_remotes "link set" + + log_test 'FDB default-remote handling across "ip link set"' +} + +trap defer_scopes_cleanup EXIT + +tests_run -ip link del dev vx exit $EXIT_STATUS -- 2.47.0

2 months, 2 weeks

1
0
0 0

[PATCH net-next 2/4] selftests: forwarding: lib: Move require_command to net, generalize

by Petr Machata

This helper could be useful to more than just forwarding tests. Move it upstairs and port over to log_test_skip(). Split the function into two parts: the bit that actually checks and reports skip, which is in a new function check_command(). And a bit that exits the test script if the check fails. This allows users consistent checking behavior while giving an option to bail out from a single test without bailing out of the whole script. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> --- Notes: CC: Simon Horman <horms(a)kernel.org> CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org tools/testing/selftests/net/forwarding/lib.sh | 10 ---------- tools/testing/selftests/net/lib.sh | 19 +++++++++++++++++++ 2 files changed, 19 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 8de80acf249e..508f3c700d71 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -291,16 +291,6 @@ if [[ "$CHECK_TC" = "yes" ]]; then check_tc_version fi -require_command() -{ - local cmd=$1; shift - - if [[ ! -x "$(command -v "$cmd")" ]]; then - echo "SKIP: $cmd not installed" - exit $ksft_skip - fi -} - # IPv6 support was added in v3.0 check_mtools_version() { diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index 0bd9a038a1f0..975be4fdbcdb 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -450,6 +450,25 @@ kill_process() { kill $pid && wait $pid; } 2>/dev/null } +check_command() +{ + local cmd=$1; shift + + if [[ ! -x "$(command -v "$cmd")" ]]; then + log_test_skip "$cmd not installed" + return $EXIT_STATUS + fi +} + +require_command() +{ + local cmd=$1; shift + + if ! check_command "$cmd"; then + exit $EXIT_STATUS + fi +} + ip_link_add() { local name=$1; shift -- 2.47.0

2 months, 2 weeks

1
0
0 0

[PATCH] selftests: net: fix grammar in reuseaddr_ports_exhausted.c log message

by Pranav Tyagi

This patch fixes a grammatical error in a test log message in reuseaddr_ports_exhausted.c for better clarity as a part of lfx application tasks Signed-off-by: Pranav Tyagi <pranav.tyagi03(a)gmail.com> --- tools/testing/selftests/net/reuseaddr_ports_exhausted.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/reuseaddr_ports_exhausted.c b/tools/testing/selftests/net/reuseaddr_ports_exhausted.c index 066efd30e294..7b9bf8a7bbe1 100644 --- a/tools/testing/selftests/net/reuseaddr_ports_exhausted.c +++ b/tools/testing/selftests/net/reuseaddr_ports_exhausted.c @@ -112,7 +112,7 @@ TEST(reuseaddr_ports_exhausted_reusable_same_euid) ASSERT_NE(-1, fd[0]) TH_LOG("failed to bind."); if (opts->reuseport[0] && opts->reuseport[1]) { - EXPECT_EQ(-1, fd[1]) TH_LOG("should fail to bind because both sockets succeed to be listened."); + EXPECT_EQ(-1, fd[1]) TH_LOG("should fail to bind because both sockets successfully listened."); } else { EXPECT_NE(-1, fd[1]) TH_LOG("should succeed to bind to connect to different destinations."); } -- 2.47.1

2 months, 2 weeks

1
0
0 0

[PATCH v6 0/7] Buddy allocator like (or non-uniform) folio split

by Zi Yan

Hi all, This patchset adds a new buddy allocator like (or non-uniform) large folio split to reduce the total number of after-split folios, the amount of memory needed for multi-index xarray split, and keep more large folios after a split. It is on top of mm-everything-2025-02-01-05-58. It is ready to be merged. Instead of duplicating existing split_huge_page*() code, __folio_split() is introduced as the shared backend code for both split_huge_page_to_list_to_order() and folio_split(). __folio_split() can support both uniform split and buddy allocator like (or non-uniform) split. All existing split_huge_page*() users can be gradually converted to use folio_split() if possible. In this patchset, I converted truncate_inode_partial_folio() to use folio_split(). xfstests quick group passed for both tmpfs and xfs. Changelog === From V5[7]: 1. Split shmem to any lower order patches are in mm tree, so dropped from this series. 2. Rename split_folio_at() to try_folio_split() to clarify that non-uniform split will not be used if it is not supported. From V4[6]: 1. Enabled shmem support in both uniform and buddy allocator like split and added selftests for it. 2. Added functions to check if uniform split and buddy allocator like split are supported for the given folio and order. 3. Made truncate fall back to uniform split if buddy allocator split is not supported (CONFIG_READ_ONLY_THP_FOR_FS and FS without large folio). 4. Added the missing folio_clear_has_hwpoisoned() to __split_unmapped_folio(). From V3[5]: 1. Used xas_split_alloc(GFP_NOWAIT) instead of xas_nomem(), since extra operations inside xas_split_alloc() are needed for correctness. 2. Enabled folio_split() for shmem and no issue was found with xfstests quick test group. 3. Split both ends of a truncate range in truncate_inode_partial_folio() to avoid wasting memory in shmem truncate (per David Hildenbrand). 4. Removed page_in_folio_offset() since page_folio() does the same thing. 5. Finished truncate related tests from xfstests quick test group on XFS and tmpfs without issues. 6. Disabled buddy allocator like split on CONFIG_READ_ONLY_THP_FOR_FS and FS without large folio. This check was missed in the prior versions. From V2[3]: 1. Incorporated all the feedback from Kirill[4]. 2. Used GFP_NOWAIT for xas_nomem(). 3. Tested the code path when xas_nomem() fails. 4. Added selftests for folio_split(). 5. Fixed no THP config build error. From V1[2]: 1. Split the original patch 1 into multiple ones for easy review (per Kirill). 2. Added xas_destroy() to avoid memory leak. 3. Fixed nr_dropped not used error (per kernel test robot). 4. Added proper error handling when xas_nomem() fails to allocate memory for xas_split() during buddy allocator like split. From RFC[1]: 1. Merged backend code of split_huge_page_to_list_to_order() and folio_split(). The same code is used for both uniform split and buddy allocator like split. 2. Use xas_nomem() instead of xas_split_alloc() for folio_split(). 3. folio_split() now leaves the first after-split folio unlocked, instead of the one containing the given page, since the caller of truncate_inode_partial_folio() locks and unlocks the first folio. 4. Extended split_huge_page debugfs to use folio_split(). 5. Added truncate_inode_partial_folio() as first user of folio_split(). Design === folio_split() splits a large folio in the same way as buddy allocator splits a large free page for allocation. The purpose is to minimize the number of folios after the split. For example, if user wants to free the 3rd subpage in a order-9 folio, folio_split() will split the order-9 folio as: O-0, O-0, O-0, O-0, O-2, O-3, O-4, O-5, O-6, O-7, O-8 if it is anon O-1, O-0, O-0, O-2, O-3, O-4, O-5, O-6, O-7, O-9 if it is pagecache Since anon folio does not support order-1 yet. The split process is similar to existing approach: 1. Unmap all page mappings (split PMD mappings if exist); 2. Split meta data like memcg, page owner, page alloc tag; 3. Copy meta data in struct folio to sub pages, but instead of spliting the whole folio into multiple smaller ones with the same order in a shot, this approach splits the folio iteratively. Taking the example above, this approach first splits the original order-9 into two order-8, then splits left part of order-8 to two order-7 and so on; 4. Post-process split folios, like write mapping->i_pages for pagecache, adjust folio refcounts, add split folios to corresponding list; 5. Remap split folios 6. Unlock split folios. __split_unmapped_folio() and __split_folio_to_order() replace __split_huge_page() and __split_huge_page_tail() respectively. __split_unmapped_folio() uses different approaches to perform uniform split and buddy allocator like split: 1. uniform split: one single call to __split_folio_to_order() is used to uniformly split the given folio. All resulting folios are put back to the list after split. The folio containing the given page is left to caller to unlock and others are unlocked. 2. buddy allocator like (or non-uniform) split: (old_order - new_order) calls to __split_folio_to_order() are used to split the given folio at order N to order N-1. After each call, the target folio is changed to the one containing the page, which is given as a folio_split() parameter. After each call, folios not containing the page are put back to the list. The folio containing the page is put back to the list when its order is new_order. All folios are unlocked except the first folio, which is left to caller to unlock. Patch Overview === 1. Patch 1 added __split_unmapped_folio() and __split_folio_to_order() to prepare for moving to new backend split code. 2. Patch 2 moved common code in split_huge_page_to_list_to_order() to __folio_split(). 3. Patch 3 added new folio_split() and made split_huge_page_to_list_to_order() share the new __split_unmapped_folio() with folio_split(). 4. Patch 4 removed no longer used __split_huge_page() and __split_huge_page_tail(). 5. Patch 5 added a new in_folio_offset to split_huge_page debugfs for folio_split() test. 6. Patch 6 used try_folio_split() for truncate operation. 7. Patch 7 added folio_split() tests. Any comments and/or suggestions are welcome. Thanks. [1] https://lore.kernel.org/linux-mm/20241008223748.555845-1-ziy@nvidia.com/ [2] https://lore.kernel.org/linux-mm/20241028180932.1319265-1-ziy@nvidia.com/ [3] https://lore.kernel.org/linux-mm/20241101150357.1752726-1-ziy@nvidia.com/ [4] https://lore.kernel.org/linux-mm/e6ppwz5t4p4kvir6eqzoto4y5fmdjdxdyvxvtw43nc… [5] https://lore.kernel.org/linux-mm/20241205001839.2582020-1-ziy@nvidia.com/ [6] https://lore.kernel.org/linux-mm/20250106165513.104899-1-ziy@nvidia.com/ [7] https://lore.kernel.org/linux-mm/20250116211042.741543-1-ziy@nvidia.com/ Zi Yan (7): mm/huge_memory: add two new (not yet used) functions for folio_split() mm/huge_memory: move folio split common code to __folio_split() mm/huge_memory: add buddy allocator like folio_split() mm/huge_memory: remove the old, unused __split_huge_page() mm/huge_memory: add folio_split() to debugfs testing interface. mm/truncate: use buddy allocator like folio split for truncate operation. selftests/mm: add tests for folio_split(), buddy allocator like split. include/linux/huge_mm.h | 36 + mm/huge_memory.c | 749 ++++++++++++------ mm/truncate.c | 31 +- .../selftests/mm/split_huge_page_test.c | 34 +- 4 files changed, 582 insertions(+), 268 deletions(-) -- 2.47.2

2 months, 2 weeks

3
12
0 0

[PATCH v4 0/2] scanf: convert self-test to KUnit

by Tamir Duberstein

This is one of just 3 remaining "Test Module" kselftests (the others being bitmap and printf), the rest having been converted to KUnit. In addition to the enclosed patch, please consider this an RFC on the removal of the "Test Module" kselftest machinery. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 scanf Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v4: - Bake `test` into various macros, greatly reducing diff noise. - Revert control flow changes. - Link to v3: https://lore.kernel.org/r/20250204-scanf-kunit-convert-v3-0-386d7c3ee714@gm… Changes in v3: - Reduce diff noise in lib/Makefile. (Petr Mladek) - Split `scanf_test` into a few test cases. New output: : =================== scanf (10 subtests) ==================== : [PASSED] numbers_simple : ====================== numbers_list ======================= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ================== [PASSED] numbers_list =================== : ============ numbers_list_field_width_typemax ============= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======== [PASSED] numbers_list_field_width_typemax ========= : =========== numbers_list_field_width_val_width ============ : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======= [PASSED] numbers_list_field_width_val_width ======== : [PASSED] numbers_slice : [PASSED] numbers_prefix_overflow : [PASSED] test_simple_strtoull : [PASSED] test_simple_strtoll : [PASSED] test_simple_strtoul : [PASSED] test_simple_strtol : ====================== [PASSED] scanf ====================== : ============================================================ : Testing complete. Ran 22 tests: passed: 22 : Elapsed time: 5.517s total, 0.001s configuring, 5.440s building, 0.067s running - Link to v2: https://lore.kernel.org/r/20250203-scanf-kunit-convert-v2-1-277a618d804e@gm… Changes in v2: - Rename lib/{test_scanf.c => scanf_kunit.c}. (Andy Shevchenko) - Link to v1: https://lore.kernel.org/r/20250131-scanf-kunit-convert-v1-1-0976524f0eba@gm… --- Tamir Duberstein (2): scanf: convert self-test to KUnit scanf: break kunit into test cases MAINTAINERS | 2 +- arch/m68k/configs/amiga_defconfig | 1 - arch/m68k/configs/apollo_defconfig | 1 - arch/m68k/configs/atari_defconfig | 1 - arch/m68k/configs/bvme6000_defconfig | 1 - arch/m68k/configs/hp300_defconfig | 1 - arch/m68k/configs/mac_defconfig | 1 - arch/m68k/configs/multi_defconfig | 1 - arch/m68k/configs/mvme147_defconfig | 1 - arch/m68k/configs/mvme16x_defconfig | 1 - arch/m68k/configs/q40_defconfig | 1 - arch/m68k/configs/sun3_defconfig | 1 - arch/m68k/configs/sun3x_defconfig | 1 - arch/powerpc/configs/ppc64_defconfig | 1 - lib/Kconfig.debug | 20 ++- lib/Makefile | 2 +- lib/{test_scanf.c => scanf_kunit.c} | 260 +++++++++++++++++------------------ tools/testing/selftests/lib/Makefile | 2 +- tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/scanf.sh | 4 - 20 files changed, 149 insertions(+), 155 deletions(-) --- base-commit: a86bf2283d2c9769205407e2b54777c03d012939 change-id: 20250131-scanf-kunit-convert-f70dc33bb34c Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 2 weeks

1
3
0 0

[PATCH net-next v18 00/25] Introducing OpenVPN Data Channel Offload

by Antonio Quartulli

Notable changes since v17: * fixed netdevice_tracker pointer assignment in netlink post_doit (triggered by kernel test robot on m86k) * renamed nla_get_uint() to ovpn_nla_get_uint() in ovpn-cli.c to avoid clashes with libnl-3.11.0 FTR, here are the notable changes since v16: * fixed usage of netdev tracker by removing dev_tracker member from ovpn_priv and adding it to ovpn_peer and ovpn_socket as those are the objects really holding a ref to the netdev * switched ovpn_get_dev_from_attrs() to GFP_ATOMIC to prevent sleep under rcu_read_lock * allocated netdevice_tracker in ovpn_nl_pre_doit() [stored in user_ptr[1]] to keep track of the netdev reference held during netlink handler calls * moved whole socket detaching routine to worker. This way the code is allowed to sleep and in turn it can be executed under lock_sock. This lock allows us to happily coordinate concurrent attach/detach calls. (note: lock is acquired everytime the refcnt for the socket is decremented, because this guarantees us that setting the refcnt to 0 and detaching the socket will happen atomically) * dropped kref_put_sock()/refcount handler as it's not required anymore, thanks to the point above * re-arranged ovpn_socket_new() in order to simplify error path by first allocating the new ovpn_sock and then attaching Please note that some patches were already reviewed/tested by a few people. iThese patches have retained the tags as they have hardly been touched. The latest code can also be found at: https://github.com/OpenVPN/linux-kernel-ovpn Thanks a lot! Best Regards, Antonio Quartulli OpenVPN Inc. --- Antonio Quartulli (25): net: introduce OpenVPN Data Channel Offload (ovpn) ovpn: add basic netlink support ovpn: add basic interface creation/destruction/management routines ovpn: keep carrier always on for MP interfaces ovpn: introduce the ovpn_peer object ovpn: introduce the ovpn_socket object ovpn: implement basic TX path (UDP) ovpn: implement basic RX path (UDP) ovpn: implement packet processing ovpn: store tunnel and transport statistics ipv6: export inet6_stream_ops via EXPORT_SYMBOL_GPL ovpn: implement TCP transport skb: implement skb_send_sock_locked_with_flags() ovpn: add support for MSG_NOSIGNAL in tcp_sendmsg ovpn: implement multi-peer support ovpn: implement peer lookup logic ovpn: implement keepalive mechanism ovpn: add support for updating local UDP endpoint ovpn: add support for peer floating ovpn: implement peer add/get/dump/delete via netlink ovpn: implement key add/get/del/swap via netlink ovpn: kill key and notify userspace in case of IV exhaustion ovpn: notify userspace when a peer is deleted ovpn: add basic ethtool support testing/selftests: add test tool and scripts for ovpn module Documentation/netlink/specs/ovpn.yaml | 372 +++ Documentation/netlink/specs/rt_link.yaml | 16 + MAINTAINERS | 11 + drivers/net/Kconfig | 15 + drivers/net/Makefile | 1 + drivers/net/ovpn/Makefile | 22 + drivers/net/ovpn/bind.c | 55 + drivers/net/ovpn/bind.h | 101 + drivers/net/ovpn/crypto.c | 211 ++ drivers/net/ovpn/crypto.h | 145 ++ drivers/net/ovpn/crypto_aead.c | 382 ++++ drivers/net/ovpn/crypto_aead.h | 33 + drivers/net/ovpn/io.c | 446 ++++ drivers/net/ovpn/io.h | 34 + drivers/net/ovpn/main.c | 350 +++ drivers/net/ovpn/main.h | 14 + drivers/net/ovpn/netlink-gen.c | 213 ++ drivers/net/ovpn/netlink-gen.h | 41 + drivers/net/ovpn/netlink.c | 1183 ++++++++++ drivers/net/ovpn/netlink.h | 18 + drivers/net/ovpn/ovpnstruct.h | 54 + drivers/net/ovpn/peer.c | 1269 +++++++++++ drivers/net/ovpn/peer.h | 164 ++ drivers/net/ovpn/pktid.c | 129 ++ drivers/net/ovpn/pktid.h | 87 + drivers/net/ovpn/proto.h | 118 + drivers/net/ovpn/skb.h | 60 + drivers/net/ovpn/socket.c | 204 ++ drivers/net/ovpn/socket.h | 49 + drivers/net/ovpn/stats.c | 21 + drivers/net/ovpn/stats.h | 47 + drivers/net/ovpn/tcp.c | 565 +++++ drivers/net/ovpn/tcp.h | 33 + drivers/net/ovpn/udp.c | 421 ++++ drivers/net/ovpn/udp.h | 22 + include/linux/skbuff.h | 2 + include/uapi/linux/if_link.h | 15 + include/uapi/linux/ovpn.h | 111 + include/uapi/linux/udp.h | 1 + net/core/skbuff.c | 18 +- net/ipv6/af_inet6.c | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/net/ovpn/.gitignore | 2 + tools/testing/selftests/net/ovpn/Makefile | 17 + tools/testing/selftests/net/ovpn/config | 10 + tools/testing/selftests/net/ovpn/data64.key | 5 + tools/testing/selftests/net/ovpn/ovpn-cli.c | 2367 ++++++++++++++++++++ tools/testing/selftests/net/ovpn/tcp_peers.txt | 5 + .../testing/selftests/net/ovpn/test-chachapoly.sh | 9 + tools/testing/selftests/net/ovpn/test-float.sh | 9 + tools/testing/selftests/net/ovpn/test-tcp.sh | 9 + tools/testing/selftests/net/ovpn/test.sh | 185 ++ tools/testing/selftests/net/ovpn/udp_peers.txt | 5 + 53 files changed, 9673 insertions(+), 5 deletions(-) --- base-commit: 7d0da8f862340c5f42f0062b8560b8d0971a6ac4 change-id: 20241002-b4-ovpn-eeee35c694a2 Best regards, -- Antonio Quartulli <antonio(a)openvpn.net>

2 months, 2 weeks

3
70
0 0

[PATCHv2 net 0/2] bonding: fix incorrect mac address setting

by Hangbin Liu

The mac address on backup slave should be convert from Solicited-Node Multicast address, not from bonding unicast target address. v2: fix patch 01's subject Hangbin Liu (2): bonding: fix incorrect MAC address setting to receive NS messages selftests: bonding: fix incorrect mac address drivers/net/bonding/bond_options.c | 4 +++- tools/testing/selftests/drivers/net/bonding/bond_options.sh | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) -- 2.46.0

2 months, 2 weeks

2
4
0 0

[PATCH bpf-next v1] selftests/bpf: correct the check of join cgroup

by Jason Xing

Use ASSERT_OK_FD to check the return value of join cgroup, or else this test will pass even if the fd < 0. ASSERT_OK_FD can print the error message to the console. Link: https://lore.kernel.org/all/6d62bd77-6733-40c7-b240-a1aeff55566c@linux.dev/ Suggested-by: Martin KaFai Lau <martin.lau(a)kernel.org> Signed-off-by: Jason Xing <kerneljasonxing(a)gmail.com> --- tools/testing/selftests/bpf/prog_tests/setget_sockopt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/setget_sockopt.c b/tools/testing/selftests/bpf/prog_tests/setget_sockopt.c index e12255121c15..e4dac529d424 100644 --- a/tools/testing/selftests/bpf/prog_tests/setget_sockopt.c +++ b/tools/testing/selftests/bpf/prog_tests/setget_sockopt.c @@ -202,7 +202,7 @@ static void test_nonstandard_opt(int family) void test_setget_sockopt(void) { cg_fd = test__join_cgroup(CG_NAME); - if (cg_fd < 0) + if (!ASSERT_OK_FD(cg_fd, "join cgroup")) return; if (create_netns()) -- 2.43.5

2 months, 3 weeks

3
2
0 0

[PATCH bpf] bpf: skip non existing key in generic_map_lookup_batch

by Yan Zhai

The generic_map_lookup_batch currently returns EINTR if it fails with ENOENT and retries several times on bpf_map_copy_value. The next batch would start from the same location, presuming it's a transient issue. This is incorrect if a map can actually have "holes", i.e. "get_next_key" can return a key that does not point to a valid value. At least the array of maps type may contain such holes legitly. Right now these holes show up, generic batch lookup cannot proceed any more. It will always fail with EINTR errors. Rather, do not retry in generic_map_lookup_batch. If it finds a non existing element, skip to the next key. Fixes: cb4d03ab499d ("bpf: Add generic support for lookup batch op") Closes: https://lore.kernel.org/bpf/Z6JXtA1M5jAZx8xD@debian.debian/ Signed-off-by: Yan Zhai <yan(a)cloudflare.com> --- kernel/bpf/syscall.c | 16 ++---- .../bpf/map_tests/map_in_map_batch_ops.c | 54 ++++++++++++++----- 2 files changed, 45 insertions(+), 25 deletions(-) diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index c420edbfb7c8..5691fc0d370d 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -1979,7 +1979,7 @@ int generic_map_lookup_batch(struct bpf_map *map, void __user *values = u64_to_user_ptr(attr->batch.values); void __user *keys = u64_to_user_ptr(attr->batch.keys); void *buf, *buf_prevkey, *prev_key, *key, *value; - int err, retry = MAP_LOOKUP_RETRIES; + int err; u32 value_size, cp, max_count; if (attr->batch.elem_flags & ~BPF_F_LOCK) @@ -2026,14 +2026,8 @@ int generic_map_lookup_batch(struct bpf_map *map, err = bpf_map_copy_value(map, key, value, attr->batch.elem_flags); - if (err == -ENOENT) { - if (retry) { - retry--; - continue; - } - err = -EINTR; - break; - } + if (err == -ENOENT) + goto next_key; if (err) goto free_buf; @@ -2048,12 +2042,12 @@ int generic_map_lookup_batch(struct bpf_map *map, goto free_buf; } + cp++; +next_key: if (!prev_key) prev_key = buf_prevkey; swap(prev_key, key); - retry = MAP_LOOKUP_RETRIES; - cp++; cond_resched(); } diff --git a/tools/testing/selftests/bpf/map_tests/map_in_map_batch_ops.c b/tools/testing/selftests/bpf/map_tests/map_in_map_batch_ops.c index 66191ae9863c..b38be71f06be 100644 --- a/tools/testing/selftests/bpf/map_tests/map_in_map_batch_ops.c +++ b/tools/testing/selftests/bpf/map_tests/map_in_map_batch_ops.c @@ -120,11 +120,12 @@ static void validate_fetch_results(int outer_map_fd, static void fetch_and_validate(int outer_map_fd, struct bpf_map_batch_opts *opts, - __u32 batch_size, bool delete_entries) + __u32 batch_size, bool delete_entries, + bool has_holes) { + int err, max_entries = OUTER_MAP_ENTRIES - !!has_holes; __u32 *fetched_keys, *fetched_values, total_fetched = 0; __u32 batch_key = 0, fetch_count, step_size; - int err, max_entries = OUTER_MAP_ENTRIES; __u32 value_size = sizeof(__u32); /* Total entries needs to be fetched */ @@ -135,9 +136,9 @@ static void fetch_and_validate(int outer_map_fd, "error=%s\n", strerror(errno)); for (step_size = batch_size; - step_size <= max_entries; + step_size < max_entries + batch_size; /* allow read partial */ step_size += batch_size) { - fetch_count = step_size; + fetch_count = batch_size; err = delete_entries ? bpf_map_lookup_and_delete_batch(outer_map_fd, total_fetched ? &batch_key : NULL, @@ -184,18 +185,19 @@ static void fetch_and_validate(int outer_map_fd, } static void _map_in_map_batch_ops(enum bpf_map_type outer_map_type, - enum bpf_map_type inner_map_type) + enum bpf_map_type inner_map_type, + bool has_holes) { + __u32 max_entries = OUTER_MAP_ENTRIES - !!has_holes; __u32 *outer_map_keys, *inner_map_fds; - __u32 max_entries = OUTER_MAP_ENTRIES; LIBBPF_OPTS(bpf_map_batch_opts, opts); __u32 value_size = sizeof(__u32); int batch_size[2] = {5, 10}; __u32 map_index, op_index; int outer_map_fd, ret; - outer_map_keys = calloc(max_entries, value_size); - inner_map_fds = calloc(max_entries, value_size); + outer_map_keys = calloc(OUTER_MAP_ENTRIES, value_size); + inner_map_fds = calloc(OUTER_MAP_ENTRIES, value_size); CHECK((!outer_map_keys || !inner_map_fds), "Memory allocation failed for outer_map_keys or inner_map_fds", "error=%s\n", strerror(errno)); @@ -209,6 +211,24 @@ static void _map_in_map_batch_ops(enum bpf_map_type outer_map_type, ((outer_map_type == BPF_MAP_TYPE_ARRAY_OF_MAPS) ? 9 : 1000) - map_index; + /* This condition is only meaningful for array of maps. + * + * max_entries == OUTER_MAP_ENTRIES - 1 if it is true. Say + * max_entries is short for n, then outer_map_keys looks like: + * + * [n, n-1, ... 2, 1] + * + * We change it to + * + * [n, n-1, ... 2, 0] + * + * So it will leave key 1 as a hole. It will serve to test the + * correctness when batch on an array: a "non-exist" key might be + * actually allocated and returned from key iteration. + */ + if (has_holes) + outer_map_keys[max_entries - 1]--; + /* batch operation - map_update */ ret = bpf_map_update_batch(outer_map_fd, outer_map_keys, inner_map_fds, &max_entries, &opts); @@ -219,12 +239,14 @@ static void _map_in_map_batch_ops(enum bpf_map_type outer_map_type, /* batch operation - map_lookup */ for (op_index = 0; op_index < 2; ++op_index) fetch_and_validate(outer_map_fd, &opts, - batch_size[op_index], false); + batch_size[op_index], false, + has_holes); /* batch operation - map_lookup_delete */ if (outer_map_type == BPF_MAP_TYPE_HASH_OF_MAPS) fetch_and_validate(outer_map_fd, &opts, - max_entries, true /*delete*/); + max_entries, true /*delete*/, + has_holes); /* close all map fds */ for (map_index = 0; map_index < max_entries; map_index++) @@ -237,16 +259,20 @@ static void _map_in_map_batch_ops(enum bpf_map_type outer_map_type, void test_map_in_map_batch_ops_array(void) { - _map_in_map_batch_ops(BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_ARRAY); + _map_in_map_batch_ops(BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_ARRAY, false); printf("%s:PASS with inner ARRAY map\n", __func__); - _map_in_map_batch_ops(BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_HASH); + _map_in_map_batch_ops(BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_HASH, false); printf("%s:PASS with inner HASH map\n", __func__); + _map_in_map_batch_ops(BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_ARRAY, true); + printf("%s:PASS with inner ARRAY map with holes\n", __func__); + _map_in_map_batch_ops(BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_HASH, true); + printf("%s:PASS with inner HASH map with holes\n", __func__); } void test_map_in_map_batch_ops_hash(void) { - _map_in_map_batch_ops(BPF_MAP_TYPE_HASH_OF_MAPS, BPF_MAP_TYPE_ARRAY); + _map_in_map_batch_ops(BPF_MAP_TYPE_HASH_OF_MAPS, BPF_MAP_TYPE_ARRAY, false); printf("%s:PASS with inner ARRAY map\n", __func__); - _map_in_map_batch_ops(BPF_MAP_TYPE_HASH_OF_MAPS, BPF_MAP_TYPE_HASH); + _map_in_map_batch_ops(BPF_MAP_TYPE_HASH_OF_MAPS, BPF_MAP_TYPE_HASH, false); printf("%s:PASS with inner HASH map\n", __func__); } -- 2.30.2

2 months, 3 weeks

2
3
0 0

[PATCH v2] wireguard: selftests: Cleanup CONFIG_UBSAN_SANITIZE_ALL

by WangYuli

Commit 918327e9b7ff ("ubsan: Remove CONFIG_UBSAN_SANITIZE_ALL") removed the CONFIG_UBSAN_SANITIZE_ALL configuration option. Eliminate invalid configurations to improve code readability. Reviewed-by: Simon Horman <horms(a)kernel.org> Signed-off-by: WangYuli <wangyuli(a)uniontech.com> --- Changelog: *v1->v2: Add Simon Horman's "Reviewed-by" tag. --- tools/testing/selftests/wireguard/qemu/debug.config | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/wireguard/qemu/debug.config b/tools/testing/selftests/wireguard/qemu/debug.config index 139fd9aa8b12..828f14300d0a 100644 --- a/tools/testing/selftests/wireguard/qemu/debug.config +++ b/tools/testing/selftests/wireguard/qemu/debug.config @@ -22,7 +22,6 @@ CONFIG_HAVE_ARCH_KASAN=y CONFIG_KASAN=y CONFIG_KASAN_INLINE=y CONFIG_UBSAN=y -CONFIG_UBSAN_SANITIZE_ALL=y CONFIG_DEBUG_KMEMLEAK=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUG_SHIRQ=y -- 2.47.2

2 months, 3 weeks

1
0
0 0

[PATCH net-next v4 0/3] netdev-genl: Add an xsk attribute to queues

by Joe Damato

Greetings: Welcome to v4. Small functional change, which makes the code cleaner (see changelog) and tests pass on my machine with mlx5 and netdevsim. This is an attempt to followup on something Jakub asked me about [1], adding an xsk attribute to queues and more clearly documenting which queues are linked to NAPIs... After the RFC [2], Jakub suggested creating an empty nest for queues which have a pool, so I've adjusted this version to work that way. The nest can be extended in the future to express attributes about XSK as needed. Queues which are not used for AF_XDP do not have the xsk attribute present. I've run the included test on: - my mlx5 machine (via NETIF=) - without setting NETIF And the test seems to pass in both cases. Thanks, Joe [1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/ [2]: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ v4: - Add patch 1, as suggested by Jakub, which adds an empty nest helper. - Use the helper in patch 2, which makes the code cleaner and prevents a possible bug. v3: https://lore.kernel.org/netdev/20250204191108.161046-1-jdamato@fastly.com/ - Change comment format in patch 2 to avoid kdoc warnings. No other changes. v2: https://lore.kernel.org/all/20250203185828.19334-1-jdamato@fastly.com/ - Switched from RFC to actual submission now that net-next is open - Adjusted patch 1 to include an empty nest as suggested by Jakub - Adjusted patch 2 to update the test based on changes to patch 1, and to incorporate some Python feedback from Jakub :) rfc: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ Joe Damato (3): netlink: Add nla_put_empty_nest helper netdev-genl: Add an XSK attribute to queues selftests: drv-net: Test queue xsk attribute Documentation/netlink/specs/netdev.yaml | 13 ++- include/net/netlink.h | 15 ++++ include/uapi/linux/netdev.h | 6 ++ net/core/netdev-genl.c | 12 +++ tools/include/uapi/linux/netdev.h | 6 ++ .../testing/selftests/drivers/net/.gitignore | 2 + tools/testing/selftests/drivers/net/Makefile | 3 + tools/testing/selftests/drivers/net/queues.py | 35 +++++++- .../selftests/drivers/net/xdp_helper.c | 89 +++++++++++++++++++ 9 files changed, 178 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/.gitignore create mode 100644 tools/testing/selftests/drivers/net/xdp_helper.c base-commit: f3eba8edd885db439f4bfaa2cf9d766bad1ae6c5 -- 2.43.0

2 months, 3 weeks

1
1
0 0

[PATCH RFT v14 0/8] fork: Support shadow stacks in clone3()

by Mark Brown

The kernel has recently added support for shadow stacks, currently x86 only using their CET feature but both arm64 and RISC-V have equivalent features (GCS and Zicfiss respectively), I am actively working on GCS[1]. With shadow stacks the hardware maintains an additional stack containing only the return addresses for branch instructions which is not generally writeable by userspace and ensures that any returns are to the recorded addresses. This provides some protection against ROP attacks and making it easier to collect call stacks. These shadow stacks are allocated in the address space of the userspace process. Our API for shadow stacks does not currently offer userspace any flexiblity for managing the allocation of shadow stacks for newly created threads, instead the kernel allocates a new shadow stack with the same size as the normal stack whenever a thread is created with the feature enabled. The stacks allocated in this way are freed by the kernel when the thread exits or shadow stacks are disabled for the thread. This lack of flexibility and control isn't ideal, in the vast majority of cases the shadow stack will be over allocated and the implicit allocation and deallocation is not consistent with other interfaces. As far as I can tell the interface is done in this manner mainly because the shadow stack patches were in development since before clone3() was implemented. Since clone3() is readily extensible let's add support for specifying a shadow stack when creating a new thread or process, keeping the current implicit allocation behaviour if one is not specified either with clone3() or through the use of clone(). The user must provide a shadow stack pointer, this must point to memory mapped for use as a shadow stackby map_shadow_stack() with an architecture specified shadow stack token at the top of the stack. Please note that the x86 portions of this code are build tested only, I don't appear to have a system that can run CET available to me. [1] https://lore.kernel.org/linux-arm-kernel/20241001-arm64-gcs-v13-0-222b78d87… Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v14: - Rebase onto v6.14-rc1. - Link to v13: https://lore.kernel.org/r/20241203-clone3-shadow-stack-v13-0-93b89a81a5ed@k… Changes in v13: - Rebase onto v6.13-rc1. - Link to v12: https://lore.kernel.org/r/20241031-clone3-shadow-stack-v12-0-7183eb8bee17@k… Changes in v12: - Add the regular prctl() to the userspace API document since arm64 support is queued in -next. - Link to v11: https://lore.kernel.org/r/20241005-clone3-shadow-stack-v11-0-2a6a2bd6d651@k… Changes in v11: - Rebase onto arm64 for-next/gcs, which is based on v6.12-rc1, and integrate arm64 support. - Rework the interface to specify a shadow stack pointer rather than a base and size like we do for the regular stack. - Link to v10: https://lore.kernel.org/r/20240821-clone3-shadow-stack-v10-0-06e8797b9445@k… Changes in v10: - Integrate fixes & improvements for the x86 implementation from Rick Edgecombe. - Require that the shadow stack be VM_WRITE. - Require that the shadow stack base and size be sizeof(void *) aligned. - Clean up trailing newline. - Link to v9: https://lore.kernel.org/r/20240819-clone3-shadow-stack-v9-0-962d74f99464@ke… Changes in v9: - Pull token validation earlier and report problems with an error return to parent rather than signal delivery to the child. - Verify that the top of the supplied shadow stack is VM_SHADOW_STACK. - Rework token validation to only do the page mapping once. - Drop no longer needed support for testing for signals in selftest. - Fix typo in comments. - Link to v8: https://lore.kernel.org/r/20240808-clone3-shadow-stack-v8-0-0acf37caf14c@ke… Changes in v8: - Fix token verification with user specified shadow stack. - Don't track user managed shadow stacks for child processes. - Link to v7: https://lore.kernel.org/r/20240731-clone3-shadow-stack-v7-0-a9532eebfb1d@ke… Changes in v7: - Rebase onto v6.11-rc1. - Typo fixes. - Link to v6: https://lore.kernel.org/r/20240623-clone3-shadow-stack-v6-0-9ee7783b1fb9@ke… Changes in v6: - Rebase onto v6.10-rc3. - Ensure we don't try to free the parent shadow stack in error paths of x86 arch code. - Spelling fixes in userspace API document. - Additional cleanups and improvements to the clone3() tests to support the shadow stack tests. - Link to v5: https://lore.kernel.org/r/20240203-clone3-shadow-stack-v5-0-322c69598e4b@ke… Changes in v5: - Rebase onto v6.8-rc2. - Rework ABI to have the user allocate the shadow stack memory with map_shadow_stack() and a token. - Force inlining of the x86 shadow stack enablement. - Move shadow stack enablement out into a shared header for reuse by other tests. - Link to v4: https://lore.kernel.org/r/20231128-clone3-shadow-stack-v4-0-8b28ffe4f676@ke… Changes in v4: - Formatting changes. - Use a define for minimum shadow stack size and move some basic validation to fork.c. - Link to v3: https://lore.kernel.org/r/20231120-clone3-shadow-stack-v3-0-a7b8ed3e2acc@ke… Changes in v3: - Rebase onto v6.7-rc2. - Remove stale shadow_stack in internal kargs. - If a shadow stack is specified unconditionally use it regardless of CLONE_ parameters. - Force enable shadow stacks in the selftest. - Update changelogs for RISC-V feature rename. - Link to v2: https://lore.kernel.org/r/20231114-clone3-shadow-stack-v2-0-b613f8681155@ke… Changes in v2: - Rebase onto v6.7-rc1. - Remove ability to provide preallocated shadow stack, just specify the desired size. - Link to v1: https://lore.kernel.org/r/20231023-clone3-shadow-stack-v1-0-d867d0b5d4d0@ke… --- Mark Brown (8): arm64/gcs: Return a success value from gcs_alloc_thread_stack() Documentation: userspace-api: Add shadow stack API documentation selftests: Provide helper header for shadow stack testing fork: Add shadow stack support to clone3() selftests/clone3: Remove redundant flushes of output streams selftests/clone3: Factor more of main loop into test_clone3() selftests/clone3: Allow tests to flag if -E2BIG is a valid error code selftests/clone3: Test shadow stack support Documentation/userspace-api/index.rst | 1 + Documentation/userspace-api/shadow_stack.rst | 44 +++++ arch/arm64/include/asm/gcs.h | 8 +- arch/arm64/kernel/process.c | 8 +- arch/arm64/mm/gcs.c | 62 +++++- arch/x86/include/asm/shstk.h | 11 +- arch/x86/kernel/process.c | 2 +- arch/x86/kernel/shstk.c | 57 +++++- include/asm-generic/cacheflush.h | 11 ++ include/linux/sched/task.h | 17 ++ include/uapi/linux/sched.h | 10 +- kernel/fork.c | 96 +++++++-- tools/testing/selftests/clone3/clone3.c | 226 ++++++++++++++++++---- tools/testing/selftests/clone3/clone3_selftests.h | 65 ++++++- tools/testing/selftests/ksft_shstk.h | 98 ++++++++++ 15 files changed, 635 insertions(+), 81 deletions(-) --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20231019-clone3-shadow-stack-15d40d2bf536 Best regards, -- Mark Brown <broonie(a)kernel.org>

2 months, 3 weeks

2
9
0 0

[PATCH bpf-next v9 0/5] xsk: TX metadata Launch Time support

by Song Yoong Siang

This series expands the XDP TX metadata framework to allow user applications to pass per packet 64-bit launch time directly to the kernel driver, requesting launch time hardware offload support. The XDP TX metadata framework will not perform any clock conversion or packet reordering. Please note that the role of Tx metadata is just to pass the launch time, not to enable the offload feature. Users will need to enable the launch time hardware offload feature of the device by using the respective command, such as the tc-etf command. Although some devices use the tc-etf command to enable their launch time hardware offload feature, xsk packets will not go through the etf qdisc. Therefore, in my opinion, the launch time should always be based on the PTP Hardware Clock (PHC). Thus, i did not include a clock ID to indicate the clock source. To simplify the test steps, I modified the xdp_hw_metadata bpf self-test tool in such a way that it will set the launch time based on the offset provided by the user and the value of the Receive Hardware Timestamp, which is against the PHC. This will eliminate the need to discipline System Clock with the PHC and then use clock_gettime() to get the time. Please note that AF_XDP lacks a feedback mechanism to inform the application if the requested launch time is invalid. So, users are expected to familiar with the horizon of the launch time of the device they use and not request a launch time that is beyond the horizon. Otherwise, the driver might interpret the launch time incorrectly and react wrongly. For stmmac and igc, where modulo computation is used, a launch time larger than the horizon will cause the device to transmit the packet earlier that the requested launch time. Although there is no feedback mechanism for the launch time request for now, user still can check whether the requested launch time is working or not, by requesting the Transmit Completion Hardware Timestamp. V9: - Remove the igc_desc_unused() checking (Maciej) - Ensure that skb allocation and DMA mapping work before proceeding to fill in igc_tx_buffer info, context desc, and data desc (Maciej) - Rate limit the error messages (Maciej) - Update the comment to indicate that the 2 descriptors needed by the empty frame are already taken into consideration (Maciej) - Handle the case where the insertion of an empty frame fails and explain the reason behind (Maciej) - put self SOB tag as last tag (Maciej) V8: https://lore.kernel.org/netdev/20250205024116.798862-1-yoong.siang.song@int… - check the number of used descriptor in xsk_tx_metadata_request() by using used_desc of struct igc_metadata_request, and then decreases the budget with it (Maciej) - submit another bug fix patch to set the buffer type for empty frame (Maciej): https://lore.kernel.org/netdev/20250205023603.798819-1-yoong.siang.song@int… V7: https://lore.kernel.org/netdev/20250204004907.789330-1-yoong.siang.song@int… - split the refactoring code of igc empty packet insertion into a separate commit (Faizal) - add explanation on why the value "4" is used as igc transmit budget (Faizal) - perform a stress test by sending 1000 packets with 10ms interval and launch time set to 500us in the future (Faizal & Yong Liang) V6: https://lore.kernel.org/netdev/20250116155350.555374-1-yoong.siang.song@int… - fix selftest build errors by using asprintf() and realloc(), instead of managing the buffer sizes manually (Daniel, Stanislav) V5: https://lore.kernel.org/netdev/20250114152718.120588-1-yoong.siang.song@int… - change netdev feature name from tx-launch-time to tx-launch-time-fifo to explicitly state the FIFO behaviour (Stanislav) - improve the looping of xdp_hw_metadata app to wait for packet tx completion to be more readable by using clock_gettime() (Stanislav) - add launch time setup steps into xdp_hw_metadata app (Stanislav) V4: https://lore.kernel.org/netdev/20250106135506.9687-1-yoong.siang.song@intel… - added XDP launch time support to the igc driver (Jesper & Florian) - added per-driver launch time limitation on xsk-tx-metadata.rst (Jesper) - added explanation on FIFO behavior on xsk-tx-metadata.rst (Jakub) - added step to enable launch time in the commit message (Jesper & Willem) - explicitly documented the type of launch_time and which clock source it is against (Willem) V3: https://lore.kernel.org/netdev/20231203165129.1740512-1-yoong.siang.song@in… - renamed to use launch time (Jesper & Willem) - changed the default launch time in xdp_hw_metadata apps from 1s to 0.1s because some NICs do not support such a large future time. V2: https://lore.kernel.org/netdev/20231201062421.1074768-1-yoong.siang.song@in… - renamed to use Earliest TxTime First (Willem) - renamed to use txtime (Willem) V1: https://lore.kernel.org/netdev/20231130162028.852006-1-yoong.siang.song@int… Song Yoong Siang (5): xsk: Add launch time hardware offload support to XDP Tx metadata selftests/bpf: Add launch time request to xdp_hw_metadata net: stmmac: Add launch time support to XDP ZC igc: Refactor empty frame insertion for launch time support igc: Add launch time support to XDP ZC Documentation/netlink/specs/netdev.yaml | 4 + Documentation/networking/xsk-tx-metadata.rst | 62 +++++++ drivers/net/ethernet/intel/igc/igc.h | 1 + drivers/net/ethernet/intel/igc/igc_main.c | 141 +++++++++++---- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 + .../net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++ include/net/xdp_sock.h | 10 ++ include/net/xdp_sock_drv.h | 1 + include/uapi/linux/if_xdp.h | 10 ++ include/uapi/linux/netdev.h | 3 + net/core/netdev-genl.c | 2 + net/xdp/xsk.c | 3 + tools/include/uapi/linux/if_xdp.h | 10 ++ tools/include/uapi/linux/netdev.h | 3 + tools/testing/selftests/bpf/xdp_hw_metadata.c | 168 +++++++++++++++++- 15 files changed, 394 insertions(+), 39 deletions(-) -- 2.34.1

2 months, 3 weeks

2
8
0 0

[PATCH net-next v5 0/7] tun: Unify vnet implementation

by Akihiko Odaki

When I implemented virtio's hash-related features to tun/tap [1], I found tun/tap does not fill the entire region reserved for the virtio header, leaving some uninitialized hole in the middle of the buffer after read()/recvmesg(). This series fills the uninitialized hole. More concretely, the num_buffers field will be initialized with 1, and the other fields will be inialized with 0. Setting the num_buffers field to 1 is mandated by virtio 1.0 [2]. The change to virtio header is preceded by another change that refactors tun and tap to unify their virtio-related code. [1]: https://lore.kernel.org/r/20241008-rss-v5-0-f3cf68df005d@daynix.com [2]: https://lore.kernel.org/r/20241227084256-mutt-send-email-mst@kernel.org/ Signed-off-by: Akihiko Odaki <akihiko.odaki(a)daynix.com> --- Changes in v5: - s/vnet_hdr_len_sz/vnet_hdr_sz/ for patch "tun: Decouple vnet handling" (Willem de Bruijn) - Changed to inline vnet implementations to TUN and TAP. - Dropped patch "tun: Avoid double-tracking iov_iter length changes" and "tap: Avoid double-tracking iov_iter length changes". - Link to v4: https://lore.kernel.org/r/20250120-tun-v4-0-ee81dda03d7f@daynix.com Changes in v4: - s/sz/vnet_hdr_len_sz/ for patch "tun: Decouple vnet handling" (Willem de Bruijn) - Reverted to add CONFIG_TUN_VNET. - Link to v3: https://lore.kernel.org/r/20250116-tun-v3-0-c6b2871e97f7@daynix.com Changes in v3: - Dropped changes to fill the vnet header. - Splitted patch "tun: Unify vnet implementation". - Reverted spurious changes in patch "tun: Unify vnet implementation". - Merged tun_vnet.c into TAP. - Link to v2: https://lore.kernel.org/r/20250109-tun-v2-0-388d7d5a287a@daynix.com Changes in v2: - Fixed num_buffers endian. - Link to v1: https://lore.kernel.org/r/20250108-tun-v1-0-67d784b34374@daynix.com --- Akihiko Odaki (7): tun: Refactor CONFIG_TUN_VNET_CROSS_LE tun: Keep hdr_len in tun_get_user() tun: Decouple vnet from tun_struct tun: Decouple vnet handling tun: Extract the vnet handling code tap: Keep hdr_len in tap_get_user() tap: Use tun's vnet-related code MAINTAINERS | 2 +- drivers/net/tap.c | 168 ++++++------------------------------------ drivers/net/tun.c | 193 ++++++------------------------------------------- drivers/net/tun_vnet.h | 184 ++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 231 insertions(+), 316 deletions(-) --- base-commit: a32e14f8aef69b42826cf0998b068a43d486a9e9 change-id: 20241230-tun-66e10a49b0c7 Best regards, -- Akihiko Odaki <akihiko.odaki(a)daynix.com>

2 months, 3 weeks

2
16
0 0

[PATCH net-next, v7 1/2] netlink: support dumping IPv4 multicast addresses

by Yuyang Huang

Extended RTM_GETMULTICAST to support dumping joined IPv4 multicast addresses, in addition to the existing IPv6 functionality. This allows userspace applications to retrieve both IPv4 and IPv6 multicast addresses through similar netlink command and then monitor future changes by registering to RTNLGRP_IPV4_MCADDR and RTNLGRP_IPV6_MCADDR. Cc: Maciej Żenczykowski <maze(a)google.com> Cc: Lorenzo Colitti <lorenzo(a)google.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: Yuyang Huang <yuyanghuang(a)google.com> --- Changelog since v6: - Move `inet_fill_args` and `inet_fill_ifmcaddr` from igmp.h to igmp_internal.h to avoid exposing these two definitions kernel wide. Changelog since v5: - Move the test case to a separate patch. - Refactor the code to remove the dependency on `enum addr_type_t type`. - Return error if `fillargs->event` is not set properly. - Return -EINVAL in an unreachable code path. Changelog since v4: - Fixes a bug where fillargs->event was not initialized in the code path for dumping ifaddr. - Fixes a bug where reply messages contain the wrong sequence number. - Minor style fixes. - Adds a ynl selftest. Changelog since v3: - Refactor in_dev_dump_addr() to break down the logic into two separate functions to simplify the logic. Changelog since v2: - Fix checkpatch.pl warnings. - Remove one redundant EXPORT_SYMBOL(). Changelog since v1: - Minor style fixes. - Use for_each_pmc_rcu() instead of for_each_pmc_rtnl(). include/linux/igmp_internal.h | 17 ++++++++ net/ipv4/devinet.c | 77 ++++++++++++++++++++++++++++------- net/ipv4/igmp.c | 14 +++++-- 3 files changed, 90 insertions(+), 18 deletions(-) create mode 100644 include/linux/igmp_internal.h diff --git a/include/linux/igmp_internal.h b/include/linux/igmp_internal.h new file mode 100644 index 000000000000..0a1bcc8ec8e1 --- /dev/null +++ b/include/linux/igmp_internal.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _LINUX_IGMP_INTERNAL_H +#define _LINUX_IGMP_INTERNAL_H + +struct inet_fill_args { + u32 portid; + u32 seq; + int event; + unsigned int flags; + int netnsid; + int ifindex; +}; + +int inet_fill_ifmcaddr(struct sk_buff *skb, struct net_device *dev, + const struct ip_mc_list *im, + struct inet_fill_args *args); +#endif diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index c8b3cf5fba4c..5292202fd1ea 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -46,6 +46,7 @@ #include <linux/notifier.h> #include <linux/inetdevice.h> #include <linux/igmp.h> +#include <linux/igmp_internal.h> #include <linux/slab.h> #include <linux/hash.h> #ifdef CONFIG_SYSCTL @@ -107,15 +108,6 @@ static const struct nla_policy ifa_ipv4_policy[IFA_MAX+1] = { [IFA_PROTO] = { .type = NLA_U8 }, }; -struct inet_fill_args { - u32 portid; - u32 seq; - int event; - unsigned int flags; - int netnsid; - int ifindex; -}; - #define IN4_ADDR_HSIZE_SHIFT 8 #define IN4_ADDR_HSIZE (1U << IN4_ADDR_HSIZE_SHIFT) @@ -1846,9 +1838,38 @@ static int inet_valid_dump_ifaddr_req(const struct nlmsghdr *nlh, return 0; } -static int in_dev_dump_addr(struct in_device *in_dev, struct sk_buff *skb, - struct netlink_callback *cb, int *s_ip_idx, - struct inet_fill_args *fillargs) +static int in_dev_dump_ifmcaddr(struct in_device *in_dev, struct sk_buff *skb, + struct netlink_callback *cb, int *s_ip_idx, + struct inet_fill_args *fillargs) +{ + struct ip_mc_list *im; + int ip_idx = 0; + int err; + + for (im = rcu_dereference(in_dev->mc_list); + im; + im = rcu_dereference(im->next_rcu)) { + if (ip_idx < *s_ip_idx) { + ip_idx++; + continue; + } + err = inet_fill_ifmcaddr(skb, in_dev->dev, im, fillargs); + if (err < 0) + goto done; + + nl_dump_check_consistent(cb, nlmsg_hdr(skb)); + ip_idx++; + } + err = 0; + ip_idx = 0; +done: + *s_ip_idx = ip_idx; + return err; +} + +static int in_dev_dump_ifaddr(struct in_device *in_dev, struct sk_buff *skb, + struct netlink_callback *cb, int *s_ip_idx, + struct inet_fill_args *fillargs) { struct in_ifaddr *ifa; int ip_idx = 0; @@ -1874,6 +1895,21 @@ static int in_dev_dump_addr(struct in_device *in_dev, struct sk_buff *skb, return err; } +static int in_dev_dump_addr(struct in_device *in_dev, struct sk_buff *skb, + struct netlink_callback *cb, int *s_ip_idx, + struct inet_fill_args *fillargs) +{ + switch (fillargs->event) { + case RTM_NEWADDR: + return in_dev_dump_ifaddr(in_dev, skb, cb, s_ip_idx, fillargs); + case RTM_GETMULTICAST: + return in_dev_dump_ifmcaddr(in_dev, skb, cb, s_ip_idx, + fillargs); + default: + return -EINVAL; + } +} + /* Combine dev_addr_genid and dev_base_seq to detect changes. */ static u32 inet_base_seq(const struct net *net) @@ -1889,13 +1925,14 @@ static u32 inet_base_seq(const struct net *net) return res; } -static int inet_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb) +static int inet_dump_addr(struct sk_buff *skb, struct netlink_callback *cb, + int event) { const struct nlmsghdr *nlh = cb->nlh; struct inet_fill_args fillargs = { .portid = NETLINK_CB(cb->skb).portid, .seq = nlh->nlmsg_seq, - .event = RTM_NEWADDR, + .event = event, .flags = NLM_F_MULTI, .netnsid = -1, }; @@ -1949,6 +1986,16 @@ static int inet_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb) return err; } +static int inet_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb) +{ + return inet_dump_addr(skb, cb, RTM_NEWADDR); +} + +static int inet_dump_ifmcaddr(struct sk_buff *skb, struct netlink_callback *cb) +{ + return inet_dump_addr(skb, cb, RTM_GETMULTICAST); +} + static void rtmsg_ifa(int event, struct in_ifaddr *ifa, struct nlmsghdr *nlh, u32 portid) { @@ -2845,6 +2892,8 @@ static const struct rtnl_msg_handler devinet_rtnl_msg_handlers[] __initconst = { {.protocol = PF_INET, .msgtype = RTM_GETNETCONF, .doit = inet_netconf_get_devconf, .dumpit = inet_netconf_dump_devconf, .flags = RTNL_FLAG_DOIT_UNLOCKED | RTNL_FLAG_DUMP_UNLOCKED}, + {.owner = THIS_MODULE, .protocol = PF_INET, .msgtype = RTM_GETMULTICAST, + .dumpit = inet_dump_ifmcaddr, .flags = RTNL_FLAG_DUMP_UNLOCKED}, }; void __init devinet_init(void) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 3da126cea884..ac3c45bdbdf0 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -81,6 +81,7 @@ #include <linux/skbuff.h> #include <linux/inetdevice.h> #include <linux/igmp.h> +#include <linux/igmp_internal.h> #include <linux/if_arp.h> #include <linux/rtnetlink.h> #include <linux/times.h> @@ -1432,14 +1433,16 @@ static void ip_mc_hash_remove(struct in_device *in_dev, *mc_hash = im->next_hash; } -static int inet_fill_ifmcaddr(struct sk_buff *skb, struct net_device *dev, - const struct ip_mc_list *im, int event) +int inet_fill_ifmcaddr(struct sk_buff *skb, struct net_device *dev, + const struct ip_mc_list *im, + struct inet_fill_args *args) { struct ifa_cacheinfo ci; struct ifaddrmsg *ifm; struct nlmsghdr *nlh; - nlh = nlmsg_put(skb, 0, 0, event, sizeof(struct ifaddrmsg), 0); + nlh = nlmsg_put(skb, args->portid, args->seq, args->event, + sizeof(struct ifaddrmsg), args->flags); if (!nlh) return -EMSGSIZE; @@ -1468,6 +1471,9 @@ static int inet_fill_ifmcaddr(struct sk_buff *skb, struct net_device *dev, static void inet_ifmcaddr_notify(struct net_device *dev, const struct ip_mc_list *im, int event) { + struct inet_fill_args fillargs = { + .event = event, + }; struct net *net = dev_net(dev); struct sk_buff *skb; int err = -ENOMEM; @@ -1479,7 +1485,7 @@ static void inet_ifmcaddr_notify(struct net_device *dev, if (!skb) goto error; - err = inet_fill_ifmcaddr(skb, dev, im, event); + err = inet_fill_ifmcaddr(skb, dev, im, &fillargs); if (err < 0) { WARN_ON_ONCE(err == -EMSGSIZE); nlmsg_free(skb); -- 2.48.1.362.g079036d154-goog

2 months, 3 weeks

2
5
0 0

[PATCH net-next v4 0/8] netconsole: Add support for CPU population

by Breno Leitao

The current implementation of netconsole sends all log messages in parallel, which can lead to an intermixed and interleaved output on the receiving side. This makes it challenging to demultiplex the messages and attribute them to their originating CPUs. As a result, users and developers often struggle to effectively analyze and debug the parallel log output received through netconsole. Example of a message got from produciton hosts: ------------[ cut here ]------------ ------------[ cut here ]------------ refcount_t: saturated; leaking memory. WARNING: CPU: 2 PID: 1613668 at lib/refcount.c:22 refcount_warn_saturate+0x5e/0xe0 refcount_t: addition on 0; use-after-free. WARNING: CPU: 26 PID: 4139916 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0xe0 Modules linked in: bpf_preload(E) vhost_net(E) tun(E) vhost(E) This series of patches introduces a new feature to the netconsole subsystem that allows the automatic population of the CPU number in the userdata field for each log message. This enhancement provides several benefits: * Improved demultiplexing of parallel log output: When multiple CPUs are sending messages concurrently, the added CPU number in the userdata makes it easier to differentiate and attribute the messages to their originating CPUs. * Better visibility into message sources: The CPU number information gives users and developers more insight into which specific CPU a particular log message came from, which can be valuable for debugging and analysis. The changes in this series are as follows Patches:: Patch "consolidate send buffers into netconsole_target struct" ================================================= Move the static buffers to netconsole target, from static declaration in send_msg_no_fragmentation() and send_msg_fragmented(). Patch "netconsole: Rename userdata to extradata" ================================================= Create the a concept of extradata, which encompasses the concept of userdata and the upcoming sysdatao Sysdata is a new concept being added, which is basically fields that are populated by the kernel. At this time only the CPU#, but, there is a desire to add current task name, kernel release version, etc. Patch "netconsole: Helper to count number of used entries" =========================================================== Create a simple helper to count number of entries in extradata. I am separating this in a function since it will need to count userdata and sysdata. For instance, when the user adds an extra userdata, we need to check if there is space, counting the previous data entries (from userdata and cpu data) Patch "Introduce configfs helpers for sysdata features" ====================================================== Create the concept of sysdata feature in the netconsole target, and create the configfs helpers to enable the bit in nt->sysdata Patch "Include sysdata in extradata entry count" ================================================ Add the concept of sysdata when counting for available space in the buffer. This will protect users from creating new userdata/sysdata if there is no more space Patch "netconsole: add support for sysdata and CPU population" =============================================================== This is the core patch. Basically add a new option to enable automatic CPU number population in the netconsole userdata Provides a new "cpu_nr" sysfs attribute to control this feature Patch "netconsole: selftest: test CPU number auto-population" ============================================================= Expands the existing netconsole selftest to verify the CPU number auto-population functionality Ensures the received netconsole messages contain the expected "cpu=<CPU>" entry in the message. Test different permutation with userdata Patch "netconsole: docs: Add documentation for CPU number auto-population" ============================================================================= Updates the netconsole documentation to explain the new CPU number auto-population feature Provides instructions on how to enable and use the feature I believe these changes will be a valuable addition to the netconsole subsystem, enhancing its usefulness for kernel developers and users. PS: This patchset is on top of the patch that created netcons_fragmented_msg selftest: https://lore.kernel.org/all/20250203-netcons_frag_msgs-v1-1-5bc6bedf2ac0@de… Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Changes in v4: - Fixed Kernel doc for netconsole_target (Simon) - Fixed a typo in disable_sysdata_feature (Simon) - Improved sysdata_cpu_nr_show() to return !! in a bit-wise operation - Link to v3: https://lore.kernel.org/r/20250124-netcon_cpu-v3-0-12a0d286ba1d@debian.org Changes in v3: - Moved the buffer into netconsole_target, avoiding static functions in the send path (Jakub). - Fix a documentation error (Randy Dunlap) - Created a function that handle all the extradata, consolidating it in a single place (Jakub) - Split the patch even more, trying to simplify the review. - Link to v2: https://lore.kernel.org/r/20250115-netcon_cpu-v2-0-95971b44dc56@debian.org Changes in v2: - Create the concept of extradata and sysdata. This will make the design easier to understand, and the code easier to read. * Basically extradata encompasses userdata and the new sysdata. Userdata originates from user, and sysdata originates in kernel. - Improved the test to send from a very specific CPU, which can be checked to be correct on the other side, as suggested by Jakub. - Fixed a bug where CPU # was populated at the wrong place - Link to v1: https://lore.kernel.org/r/20241113-netcon_cpu-v1-0-d187bf7c0321@debian.org --- Breno Leitao (8): netconsole: consolidate send buffers into netconsole_target struct netconsole: Rename userdata to extradata netconsole: Helper to count number of used entries netconsole: Introduce configfs helpers for sysdata features netconsole: Include sysdata in extradata entry count netconsole: add support for sysdata and CPU population netconsole: selftest: test for sysdata CPU netconsole: docs: Add documentation for CPU number auto-population Documentation/networking/netconsole.rst | 45 ++++ drivers/net/netconsole.c | 261 ++++++++++++++++----- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 17 ++ .../selftests/drivers/net/netcons_sysdata.sh | 167 +++++++++++++ 5 files changed, 427 insertions(+), 64 deletions(-) --- base-commit: 145702ca2544bf82c6b244a49163f603fbe746f4 change-id: 20241108-netcon_cpu-ce3917e88f4b Best regards, -- Breno Leitao <leitao(a)debian.org>

2 months, 3 weeks

2
11
0 0

[PATCH v2 0/2] tools/nolibc: support for 32-bit s390

by Thomas Weißschuh

Support for 32-bit s390 is very easy to implement and useful for testing. For example I used to test some generic compat_ptr() logic, which is only testable on 32-bit s390. The series depends on my other series "selftests/nolibc: test kernel configuration cleanups". (It's not a hard dependency, only a minor diff conflict) Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Changes in v2: - Rebase unto nolibc-next - Use 96 bytes of stack frame size - Pick up Ack from Willy - Link to v1: https://lore.kernel.org/r/20250122-nolibc-s390-v1-0-8c765f00e871@weissschuh… --- Thomas Weißschuh (2): selftests/nolibc: rename s390 to s390x tools/nolibc: add support for 32-bit s390 tools/include/nolibc/arch-s390.h | 5 +++++ tools/include/nolibc/arch.h | 2 +- tools/testing/selftests/nolibc/Makefile | 10 ++++++++-- tools/testing/selftests/nolibc/run-tests.sh | 7 ++++++- 4 files changed, 20 insertions(+), 4 deletions(-) --- base-commit: c1f4a7a84037249d086a4114c0c4332a260e9091 change-id: 20250122-nolibc-s390-e57141682c88 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

2 months, 3 weeks

1
2
0 0

[PATCH bpf-next v8 0/5] xsk: TX metadata Launch Time support

by Song Yoong Siang

This series expands the XDP TX metadata framework to allow user applications to pass per packet 64-bit launch time directly to the kernel driver, requesting launch time hardware offload support. The XDP TX metadata framework will not perform any clock conversion or packet reordering. Please note that the role of Tx metadata is just to pass the launch time, not to enable the offload feature. Users will need to enable the launch time hardware offload feature of the device by using the respective command, such as the tc-etf command. Although some devices use the tc-etf command to enable their launch time hardware offload feature, xsk packets will not go through the etf qdisc. Therefore, in my opinion, the launch time should always be based on the PTP Hardware Clock (PHC). Thus, i did not include a clock ID to indicate the clock source. To simplify the test steps, I modified the xdp_hw_metadata bpf self-test tool in such a way that it will set the launch time based on the offset provided by the user and the value of the Receive Hardware Timestamp, which is against the PHC. This will eliminate the need to discipline System Clock with the PHC and then use clock_gettime() to get the time. Please note that AF_XDP lacks a feedback mechanism to inform the application if the requested launch time is invalid. So, users are expected to familiar with the horizon of the launch time of the device they use and not request a launch time that is beyond the horizon. Otherwise, the driver might interpret the launch time incorrectly and react wrongly. For stmmac and igc, where modulo computation is used, a launch time larger than the horizon will cause the device to transmit the packet earlier that the requested launch time. Although there is no feedback mechanism for the launch time request for now, user still can check whether the requested launch time is working or not, by requesting the Transmit Completion Hardware Timestamp. V8: - check the number of used descriptor in xsk_tx_metadata_request() by using used_desc of struct igc_metadata_request, and then decreases the budget with it (Maciej) V7: https://lore.kernel.org/netdev/20250204004907.789330-1-yoong.siang.song@int… - split the refactoring code of igc empty packet insertion into a separate commit (Faizal) - add explanation on why the value "4" is used as igc transmit budget (Faizal) - perform a stress test by sending 1000 packets with 10ms interval and launch time set to 500us in the future (Faizal & Yong Liang) V6: https://lore.kernel.org/netdev/20250116155350.555374-1-yoong.siang.song@int… - fix selftest build errors by using asprintf() and realloc(), instead of managing the buffer sizes manually (Daniel, Stanislav) V5: https://lore.kernel.org/netdev/20250114152718.120588-1-yoong.siang.song@int… - change netdev feature name from tx-launch-time to tx-launch-time-fifo to explicitly state the FIFO behaviour (Stanislav) - improve the looping of xdp_hw_metadata app to wait for packet tx completion to be more readable by using clock_gettime() (Stanislav) - add launch time setup steps into xdp_hw_metadata app (Stanislav) V4: https://lore.kernel.org/netdev/20250106135506.9687-1-yoong.siang.song@intel… - added XDP launch time support to the igc driver (Jesper & Florian) - added per-driver launch time limitation on xsk-tx-metadata.rst (Jesper) - added explanation on FIFO behavior on xsk-tx-metadata.rst (Jakub) - added step to enable launch time in the commit message (Jesper & Willem) - explicitly documented the type of launch_time and which clock source it is against (Willem) V3: https://lore.kernel.org/netdev/20231203165129.1740512-1-yoong.siang.song@in… - renamed to use launch time (Jesper & Willem) - changed the default launch time in xdp_hw_metadata apps from 1s to 0.1s because some NICs do not support such a large future time. V2: https://lore.kernel.org/netdev/20231201062421.1074768-1-yoong.siang.song@in… - renamed to use Earliest TxTime First (Willem) - renamed to use txtime (Willem) V1: https://lore.kernel.org/netdev/20231130162028.852006-1-yoong.siang.song@int… Song Yoong Siang (5): xsk: Add launch time hardware offload support to XDP Tx metadata selftests/bpf: Add launch time request to xdp_hw_metadata net: stmmac: Add launch time support to XDP ZC igc: Refactor empty packet insertion into a reusable function igc: Add launch time support to XDP ZC Documentation/netlink/specs/netdev.yaml | 4 + Documentation/networking/xsk-tx-metadata.rst | 62 +++++++ drivers/net/ethernet/intel/igc/igc.h | 1 + drivers/net/ethernet/intel/igc/igc_main.c | 94 +++++++--- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 + .../net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++ include/net/xdp_sock.h | 10 ++ include/net/xdp_sock_drv.h | 1 + include/uapi/linux/if_xdp.h | 10 ++ include/uapi/linux/netdev.h | 3 + net/core/netdev-genl.c | 2 + net/xdp/xsk.c | 3 + tools/include/uapi/linux/if_xdp.h | 10 ++ tools/include/uapi/linux/netdev.h | 3 + tools/testing/selftests/bpf/xdp_hw_metadata.c | 168 +++++++++++++++++- 15 files changed, 359 insertions(+), 27 deletions(-) -- 2.34.1

2 months, 3 weeks

3
9
0 0

[PATCH net-next] selftests: net: suppress ReST file generation when building selftests

by Jakub Kicinski

Some selftests need libynl.a. When building it try to skip generating the ReST documentation, libynl.a does not depend on them. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: donald.hunter(a)gmail.com CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/ynl.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/ynl.mk b/tools/testing/selftests/net/ynl.mk index 12e7cae251be..e907c2751956 100644 --- a/tools/testing/selftests/net/ynl.mk +++ b/tools/testing/selftests/net/ynl.mk @@ -27,7 +27,8 @@ YNL_GENS_HASH := $(shell echo $(YNL_GENS) | sha1sum | cut -c1-8) $(OUTPUT)/libynl.a: $(YNL_SPECS) $(OUTPUT)/.libynl-$(YNL_GENS_HASH).sig $(Q)rm -f $(top_srcdir)/tools/net/ynl/libynl.a - $(Q)$(MAKE) -C $(top_srcdir)/tools/net/ynl GENS="$(YNL_GENS)" libynl.a + $(Q)$(MAKE) -C $(top_srcdir)/tools/net/ynl \ + GENS="$(YNL_GENS)" RSTS="" libynl.a $(Q)cp $(top_srcdir)/tools/net/ynl/libynl.a $(OUTPUT)/libynl.a EXTRA_CLEAN += \ -- 2.48.1

2 months, 3 weeks

3
2
0 0

[PATCH net] selftests: mptcp: connect: -f: no reconnect

by Matthieu Baerts (NGI0)

The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE by closing the connection with unread bytes in the receive queue. The xdisconnect() helper was used to stop the connection, but it does more than that: it will shut it down, then wait before reconnecting to the same address. This causes the mptcp_join's "fastclose test" to fail all the time. This failure is due to a recent change, with commit 218cc166321f ("selftests: mptcp: avoid spurious errors on disconnect"), but that went unnoticed because the test is currently ignored. The recent modification only shown an existing issue: xdisconnect() doesn't need to be used here, only the shutdown() part is needed. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable(a)vger.kernel.org Reviewed-by: Mat Martineau <martineau(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Notes: - The failure was not clearly visible on NIPA, because the results for the two impacted sub-tests are currently ignored (unstable). Still, it looks important to fix that, as this will help when the tests will be improved not to be unstable any more. --- tools/testing/selftests/net/mptcp/mptcp_connect.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.c b/tools/testing/selftests/net/mptcp/mptcp_connect.c index 414addef9a4514c489ecd09249143fe0ce2af649..d240d02fa443a1cd802f0e705ab36db5c22063a8 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_connect.c +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.c @@ -1302,7 +1302,7 @@ int main_loop(void) return ret; if (cfg_truncate > 0) { - xdisconnect(fd); + shutdown(fd, SHUT_WR); } else if (--cfg_repeat > 0) { xdisconnect(fd); --- base-commit: 4241a702e0d0c2ca9364cfac08dbf134264962de change-id: 20250204-net-mptcp-sft-conn-f-d1c14274ba66 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

2 months, 3 weeks

2
1
0 0

[PATCH] selftests/dma: Fix bad array reference.

by Liu Ye

dir[directions] should be directions[dir] to correctly index the directions array. Signed-off-by: Liu Ye <liuye(a)kylinos.cn> --- tools/testing/selftests/dma/dma_map_benchmark.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/dma/dma_map_benchmark.c b/tools/testing/selftests/dma/dma_map_benchmark.c index b12f1f9babf8..b925756373ce 100644 --- a/tools/testing/selftests/dma/dma_map_benchmark.c +++ b/tools/testing/selftests/dma/dma_map_benchmark.c @@ -118,7 +118,7 @@ int main(int argc, char **argv) } printf("dma mapping benchmark: threads:%d seconds:%d node:%d dir:%s granule: %d\n", - threads, seconds, node, dir[directions], granule); + threads, seconds, node, directions[dir], granule); printf("average map latency(us):%.1f standard deviation:%.1f\n", map.avg_map_100ns/10.0, map.map_stddev/10.0); printf("average unmap latency(us):%.1f standard deviation:%.1f\n", -- 2.25.1

2 months, 3 weeks

1
0
0 0

[PATCH] selftests: bpf: Support dynamic linking LLVM if static not available

by Daniel Xu

Since 67ab80a01886 ("selftests/bpf: Prefer static linking for LLVM libraries"), only statically linking test_progs is supported. However, some distros only provide a dynamically linkable LLVM. This commit adds a fallback for dynamically linking LLVM if static linking is not available. If both options are available, static linking is chosen. Signed-off-by: Daniel Xu <dxu(a)dxuuu.xyz> --- tools/testing/selftests/bpf/Makefile | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 6722080b2107..da514030a153 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -184,9 +184,14 @@ ifeq ($(feature-llvm),1) LLVM_CONFIG_LIB_COMPONENTS := mcdisassembler all-targets # both llvm-config and lib.mk add -D_GNU_SOURCE, which ends up as conflict LLVM_CFLAGS += $(filter-out -D_GNU_SOURCE,$(shell $(LLVM_CONFIG) --cflags)) - LLVM_LDLIBS += $(shell $(LLVM_CONFIG) --link-static --libs $(LLVM_CONFIG_LIB_COMPONENTS)) - LLVM_LDLIBS += $(shell $(LLVM_CONFIG) --link-static --system-libs $(LLVM_CONFIG_LIB_COMPONENTS)) - LLVM_LDLIBS += -lstdc++ + # Prefer linking statically if it's available, otherwise fallback to shared + ifeq ($(shell $(LLVM_CONFIG) --link-static --libs &> /dev/null && echo static),static) + LLVM_LDLIBS += $(shell $(LLVM_CONFIG) --link-static --libs $(LLVM_CONFIG_LIB_COMPONENTS)) + LLVM_LDLIBS += $(shell $(LLVM_CONFIG) --link-static --system-libs $(LLVM_CONFIG_LIB_COMPONENTS)) + LLVM_LDLIBS += -lstdc++ + else + LLVM_LDLIBS += $(shell $(LLVM_CONFIG) --link-shared --libs $(LLVM_CONFIG_LIB_COMPONENTS)) + endif LLVM_LDFLAGS += $(shell $(LLVM_CONFIG) --ldflags) endif -- 2.47.1

2 months, 3 weeks

5
7
0 0

[PATCH] selftests: pidfd: Fix compiling errors and warning

by I Hsin Cheng

When compiling selftests files under tools/testing/selftests/pidfd/ , some compiling errors and warnings will pop out as the following. CC pidfd_fdinfo_test pidfd_fdinfo_test.c: In function ‘child_fdinfo_nspid_test’: pidfd_fdinfo_test.c:231:13: warning: implicit declaration of function \ ‘mount’ [-Wimplicit-function-declaration] 231 | r = mount(NULL, "/", NULL, MS_REC | MS_PRIVATE, 0); | ^~~~~ pidfd_fdinfo_test.c:231:36: error: ‘MS_REC’ undeclared \ (first use in this function) 231 | r = mount(NULL, "/", NULL, MS_REC | MS_PRIVATE, 0); | ^~~~~~ pidfd_fdinfo_test.c:231:36: note: each undeclared identifier is \ reported only once for each function it appears in pidfd_fdinfo_test.c:231:45: error: ‘MS_PRIVATE’ undeclared \ (first use in this function); did you mean ‘MAP_PRIVATE’? 231 | r = mount(NULL, "/", NULL, MS_REC | MS_PRIVATE, 0); | ^~~~~~~~~~ | MAP_PRIVATE pidfd_fdinfo_test.c:237:15: warning: implicit declaration of function \ ‘umount2’; did you mean ‘SYS_umount2’? \ [-Wimplicit-function-declaration] 237 | (void)umount2("/proc", MNT_DETACH); | ^~~~~~~ | SYS_umount2 pidfd_fdinfo_test.c:237:32: error: ‘MNT_DETACH’ undeclared \ (first use in this function) 237 | (void)umount2("/proc", MNT_DETACH); | ^~~~~~~~~~ make: *** [../lib.mk:222: \ ~/linux/tools/testing/selftests/pidfd/pidfd_fdinfo_test] Error 1 Solve these errors and warnings by including header file <sys/mount.h>. Signed-off-by: I Hsin Cheng <richard120310(a)gmail.com> --- tools/testing/selftests/pidfd/pidfd_fdinfo_test.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c index f062a986e..f718aac75 100644 --- a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c +++ b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c @@ -13,6 +13,7 @@ #include <syscall.h> #include <sys/wait.h> #include <sys/mman.h> +#include <sys/mount.h> #include "pidfd.h" #include "../kselftest.h" -- 2.43.0

2 months, 3 weeks

2
2
0 0

[PATCH 6.13 580/623] selftests/rseq: Fix handling of glibc without rseq support

by Greg Kroah-Hartman

6.13-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> commit 336d02bc4c6bec5c3d933e5d470a94970f830957 upstream. When porting librseq commit: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") from librseq to the kernel selftests, the following line was missed at the end of rseq_init(): rseq_size = get_rseq_kernel_feature_size(); which effectively leaves rseq_size initialized to -1U when glibc does not have rseq support. glibc supports rseq from version 2.35 onwards. In a following librseq commit commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") to mimic the libc behavior, a new approach is taken: don't set the feature size in 'rseq_size' until at least one thread has successfully registered. This allows using 'rseq_size' in fast-paths to test for both registration status and available features. The caveat is that on libc either all threads are registered or none are, while with bare librseq it is the responsability of the user to register all threads using rseq. This combines the changes from the following librseq git commits: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") Fixes: a0cc649353bb ("selftests/rseq: Fix mm_cid test failure") Reported-by: Raghavendra Rao Ananta <rananta(a)google.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Raghavendra Rao Ananta <rananta(a)google.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Carlos O'Donell <carlos(a)redhat.com> Cc: Florian Weimer <fweimer(a)redhat.com> Cc: Michael Jeanson <mjeanson(a)efficios.com> Cc: linux-kselftest(a)vger.kernel.org Cc: stable(a)vger.kernel.org Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/rseq/rseq.c | 32 +++++++++++++++++++++++++------- tools/testing/selftests/rseq/rseq.h | 9 ++++++++- 2 files changed, 33 insertions(+), 8 deletions(-) --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -61,7 +61,6 @@ unsigned int rseq_size = -1U; unsigned int rseq_flags; static int rseq_ownership; -static int rseq_reg_success; /* At least one rseq registration has succeded. */ /* Allocate a large area for the TLS. */ #define RSEQ_THREAD_AREA_ALLOC_SIZE 1024 @@ -152,14 +151,27 @@ int rseq_register_current_thread(void) } rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { - if (RSEQ_READ_ONCE(rseq_reg_success)) { + /* + * After at least one thread has registered successfully + * (rseq_size > 0), the registration of other threads should + * never fail. + */ + if (RSEQ_READ_ONCE(rseq_size) > 0) { /* Incoherent success/failure within process. */ abort(); } return -1; } assert(rseq_current_cpu_raw() >= 0); - RSEQ_WRITE_ONCE(rseq_reg_success, 1); + + /* + * The first thread to register sets the rseq_size to mimic the libc + * behavior. + */ + if (RSEQ_READ_ONCE(rseq_size) == 0) { + RSEQ_WRITE_ONCE(rseq_size, get_rseq_kernel_feature_size()); + } + return 0; } @@ -235,12 +247,18 @@ void rseq_init(void) return; } rseq_ownership = 1; - if (!rseq_available()) { - rseq_size = 0; - return; - } + + /* Calculate the offset of the rseq area from the thread pointer. */ rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); + + /* rseq flags are deprecated, always set to 0. */ rseq_flags = 0; + + /* + * Set the size to 0 until at least one thread registers to mimic the + * libc behavior. + */ + rseq_size = 0; } static __attribute__((destructor)) --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -60,7 +60,14 @@ extern ptrdiff_t rseq_offset; /* - * Size of the registered rseq area. 0 if the registration was + * The rseq ABI is composed of extensible feature fields. The extensions + * are done by appending additional fields at the end of the structure. + * The rseq_size defines the size of the active feature set which can be + * used by the application for the current rseq registration. Features + * starting at offset >= rseq_size are inactive and should not be used. + * + * The rseq_size is the intersection between the available allocation + * size for the rseq area and the feature size supported by the kernel. * unsuccessful. */ extern unsigned int rseq_size;

2 months, 3 weeks

1
0
0 0

[PATCH 6.12 546/590] selftests/rseq: Fix handling of glibc without rseq support

by Greg Kroah-Hartman

6.12-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> commit 336d02bc4c6bec5c3d933e5d470a94970f830957 upstream. When porting librseq commit: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") from librseq to the kernel selftests, the following line was missed at the end of rseq_init(): rseq_size = get_rseq_kernel_feature_size(); which effectively leaves rseq_size initialized to -1U when glibc does not have rseq support. glibc supports rseq from version 2.35 onwards. In a following librseq commit commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") to mimic the libc behavior, a new approach is taken: don't set the feature size in 'rseq_size' until at least one thread has successfully registered. This allows using 'rseq_size' in fast-paths to test for both registration status and available features. The caveat is that on libc either all threads are registered or none are, while with bare librseq it is the responsability of the user to register all threads using rseq. This combines the changes from the following librseq git commits: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") Fixes: a0cc649353bb ("selftests/rseq: Fix mm_cid test failure") Reported-by: Raghavendra Rao Ananta <rananta(a)google.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Raghavendra Rao Ananta <rananta(a)google.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Carlos O'Donell <carlos(a)redhat.com> Cc: Florian Weimer <fweimer(a)redhat.com> Cc: Michael Jeanson <mjeanson(a)efficios.com> Cc: linux-kselftest(a)vger.kernel.org Cc: stable(a)vger.kernel.org Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/rseq/rseq.c | 32 +++++++++++++++++++++++++------- tools/testing/selftests/rseq/rseq.h | 9 ++++++++- 2 files changed, 33 insertions(+), 8 deletions(-) --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -61,7 +61,6 @@ unsigned int rseq_size = -1U; unsigned int rseq_flags; static int rseq_ownership; -static int rseq_reg_success; /* At least one rseq registration has succeded. */ /* Allocate a large area for the TLS. */ #define RSEQ_THREAD_AREA_ALLOC_SIZE 1024 @@ -152,14 +151,27 @@ int rseq_register_current_thread(void) } rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { - if (RSEQ_READ_ONCE(rseq_reg_success)) { + /* + * After at least one thread has registered successfully + * (rseq_size > 0), the registration of other threads should + * never fail. + */ + if (RSEQ_READ_ONCE(rseq_size) > 0) { /* Incoherent success/failure within process. */ abort(); } return -1; } assert(rseq_current_cpu_raw() >= 0); - RSEQ_WRITE_ONCE(rseq_reg_success, 1); + + /* + * The first thread to register sets the rseq_size to mimic the libc + * behavior. + */ + if (RSEQ_READ_ONCE(rseq_size) == 0) { + RSEQ_WRITE_ONCE(rseq_size, get_rseq_kernel_feature_size()); + } + return 0; } @@ -235,12 +247,18 @@ void rseq_init(void) return; } rseq_ownership = 1; - if (!rseq_available()) { - rseq_size = 0; - return; - } + + /* Calculate the offset of the rseq area from the thread pointer. */ rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); + + /* rseq flags are deprecated, always set to 0. */ rseq_flags = 0; + + /* + * Set the size to 0 until at least one thread registers to mimic the + * libc behavior. + */ + rseq_size = 0; } static __attribute__((destructor)) --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -60,7 +60,14 @@ extern ptrdiff_t rseq_offset; /* - * Size of the registered rseq area. 0 if the registration was + * The rseq ABI is composed of extensible feature fields. The extensions + * are done by appending additional fields at the end of the structure. + * The rseq_size defines the size of the active feature set which can be + * used by the application for the current rseq registration. Features + * starting at offset >= rseq_size are inactive and should not be used. + * + * The rseq_size is the intersection between the available allocation + * size for the rseq area and the feature size supported by the kernel. * unsuccessful. */ extern unsigned int rseq_size;

2 months, 3 weeks

1
0
0 0

[PATCH 6.6 372/393] selftests/rseq: Fix handling of glibc without rseq support

by Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> commit 336d02bc4c6bec5c3d933e5d470a94970f830957 upstream. When porting librseq commit: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") from librseq to the kernel selftests, the following line was missed at the end of rseq_init(): rseq_size = get_rseq_kernel_feature_size(); which effectively leaves rseq_size initialized to -1U when glibc does not have rseq support. glibc supports rseq from version 2.35 onwards. In a following librseq commit commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") to mimic the libc behavior, a new approach is taken: don't set the feature size in 'rseq_size' until at least one thread has successfully registered. This allows using 'rseq_size' in fast-paths to test for both registration status and available features. The caveat is that on libc either all threads are registered or none are, while with bare librseq it is the responsability of the user to register all threads using rseq. This combines the changes from the following librseq git commits: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") Fixes: a0cc649353bb ("selftests/rseq: Fix mm_cid test failure") Reported-by: Raghavendra Rao Ananta <rananta(a)google.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Raghavendra Rao Ananta <rananta(a)google.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Carlos O'Donell <carlos(a)redhat.com> Cc: Florian Weimer <fweimer(a)redhat.com> Cc: Michael Jeanson <mjeanson(a)efficios.com> Cc: linux-kselftest(a)vger.kernel.org Cc: stable(a)vger.kernel.org Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/rseq/rseq.c | 32 ++++++++++++++++++++++------- tools/testing/selftests/rseq/rseq.h | 9 +++++++- 2 files changed, 33 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq.c b/tools/testing/selftests/rseq/rseq.c index 5b9772cdf265..f6156790c3b4 100644 --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -61,7 +61,6 @@ unsigned int rseq_size = -1U; unsigned int rseq_flags; static int rseq_ownership; -static int rseq_reg_success; /* At least one rseq registration has succeded. */ /* Allocate a large area for the TLS. */ #define RSEQ_THREAD_AREA_ALLOC_SIZE 1024 @@ -152,14 +151,27 @@ int rseq_register_current_thread(void) } rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { - if (RSEQ_READ_ONCE(rseq_reg_success)) { + /* + * After at least one thread has registered successfully + * (rseq_size > 0), the registration of other threads should + * never fail. + */ + if (RSEQ_READ_ONCE(rseq_size) > 0) { /* Incoherent success/failure within process. */ abort(); } return -1; } assert(rseq_current_cpu_raw() >= 0); - RSEQ_WRITE_ONCE(rseq_reg_success, 1); + + /* + * The first thread to register sets the rseq_size to mimic the libc + * behavior. + */ + if (RSEQ_READ_ONCE(rseq_size) == 0) { + RSEQ_WRITE_ONCE(rseq_size, get_rseq_kernel_feature_size()); + } + return 0; } @@ -235,12 +247,18 @@ void rseq_init(void) return; } rseq_ownership = 1; - if (!rseq_available()) { - rseq_size = 0; - return; - } + + /* Calculate the offset of the rseq area from the thread pointer. */ rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); + + /* rseq flags are deprecated, always set to 0. */ rseq_flags = 0; + + /* + * Set the size to 0 until at least one thread registers to mimic the + * libc behavior. + */ + rseq_size = 0; } static __attribute__((destructor)) diff --git a/tools/testing/selftests/rseq/rseq.h b/tools/testing/selftests/rseq/rseq.h index 4e217b620e0c..062d10925a10 100644 --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -60,7 +60,14 @@ extern ptrdiff_t rseq_offset; /* - * Size of the registered rseq area. 0 if the registration was + * The rseq ABI is composed of extensible feature fields. The extensions + * are done by appending additional fields at the end of the structure. + * The rseq_size defines the size of the active feature set which can be + * used by the application for the current rseq registration. Features + * starting at offset >= rseq_size are inactive and should not be used. + * + * The rseq_size is the intersection between the available allocation + * size for the rseq area and the feature size supported by the kernel. * unsuccessful. */ extern unsigned int rseq_size; -- 2.48.1

2 months, 3 weeks

1
0
0 0

[PATCH net-next v3 00/10] Some pktgen fixes/improvments

by Peter Seiderer

While taking a look at '[PATCH net] pktgen: Avoid out-of-range in get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds access in get_imix_entries' ([2], [3]) and doing some tests and code review I detected that the /proc/net/pktgen/... parsing logic does not honour the user given buffer bounds (resulting in out-of-bounds access). This can be observed e.g. by the following simple test (sometimes the old/'longer' previous value is re-read from the buffer): $ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0 $ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 123 max_pkt_size: 0 Result: OK: min_pkt_size=123 So fix the out-of-bounds access (and some minor findings) and add a simple proc_net_pktgen selftest... Regards, Peter Changes v2 -> v3: - new patch: 'net: pktgen: fix ctrl interface command parsing' - new patch: 'net: pktgen: fix mpls reset parsing' - tools/testing/selftests/net/proc_net_pktgen.c: - fix typo in change description ('v1 -> v1' and tyop) - rename some vars to better match usage add_loopback_0 -> thr_cmd_add_loopback_0 rm_loopback_0 -> thr_cmd_rm_loopback_0 wrong_ctrl_cmd -> wrong_thr_cmd legacy_ctrl_cmd -> legacy_thr_cmd ctrl_fd -> thr_fd - add ctrl interface tests Changes v1 -> v2: - new patch: 'net: pktgen: fix hex32_arg parsing for short reads' - new patch: 'net: pktgen: fix 'rate 0' error handling (return -EINVAL)' - new patch: 'net: pktgen: fix 'ratep 0' error handling (return -EINVAL)' - net/core/pktgen.c: additional fix get_imix_entries() and get_labels() - tools/testing/selftests/net/proc_net_pktgen.c: - fix tyop not vs. nod (suggested by Jakub Kicinski) - fix misaligned line (suggested by Jakub Kicinski) - enable fomerly commented out CONFIG_XFRM dependent test (command spi), as CONFIG_XFRM is enabled via tools/testing/selftests/net/config CONFIG_XFRM_INTERFACE/CONFIG_XFRM_USER (suggestex by Jakub Kicinski) - add CONFIG_NET_PKTGEN=m to tools/testing/selftests/net/config (suggested by Jakub Kicinski) - add modprobe pktgen to FIXTURE_SETUP() (suggested by Jakub Kicinski) - fix some checkpatch warnings (Missing a blank line after declarations) - shrink line length by re-naming some variables (command -> cmd, device -> dev) - add 'rate 0' testcase - add 'ratep 0' testcase [1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@re… [2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/ [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Peter Seiderer (10): net: pktgen: replace ENOTSUPP with EOPNOTSUPP net: pktgen: enable 'param=value' parsing net: pktgen: fix hex32_arg parsing for short reads net: pktgen: fix 'rate 0' error handling (return -EINVAL) net: pktgen: fix 'ratep 0' error handling (return -EINVAL) net: pktgen: fix ctrl interface command parsing net: pktgen: fix access outside of user given buffer in pktgen_thread_write() net: pktgen: fix access outside of user given buffer in pktgen_if_write() net: pktgen: fix mpls reset parsing selftest: net: add proc_net_pktgen net/core/pktgen.c | 257 ++++--- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 1 + tools/testing/selftests/net/proc_net_pktgen.c | 650 ++++++++++++++++++ 4 files changed, 819 insertions(+), 90 deletions(-) create mode 100644 tools/testing/selftests/net/proc_net_pktgen.c -- 2.48.1

2 months, 3 weeks

3
23
0 0

[PATCH] selftests/mm: Fix thuge-gen test name uniqueness

by Mark Brown

The thuge-gen test_mmap() and test_shmget() tests are repeatedly run for a variety of sizes but always report the result of their test with the same name, meaning that automated sysetms running the tests are unable to distinguish between the various tests. Add the supplied sizes to the logged test names to distinguish between runs. Fixes: b38bd9b2c448 ("selftests/mm: thuge-gen: conform to TAP format output") Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/mm/thuge-gen.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/mm/thuge-gen.c b/tools/testing/selftests/mm/thuge-gen.c index e4370b79b62ffb133056eb843cdd1eaeba6503df..cd5174d735be405220d99ae796a3768f53df6ea4 100644 --- a/tools/testing/selftests/mm/thuge-gen.c +++ b/tools/testing/selftests/mm/thuge-gen.c @@ -127,7 +127,7 @@ void test_mmap(unsigned long size, unsigned flags) show(size); ksft_test_result(size == getpagesize() || (before - after) == NUM_PAGES, - "%s mmap\n", __func__); + "%s mmap %lu\n", __func__, size); if (munmap(map, size * NUM_PAGES)) ksft_exit_fail_msg("%s: unmap %s\n", __func__, strerror(errno)); @@ -165,7 +165,7 @@ void test_shmget(unsigned long size, unsigned flags) show(size); ksft_test_result(size == getpagesize() || (before - after) == NUM_PAGES, - "%s: mmap\n", __func__); + "%s: mmap %lu\n", __func__, size); if (shmdt(map)) ksft_exit_fail_msg("%s: shmdt: %s\n", __func__, strerror(errno)); } --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250204-kselftest-mm-fix-dups-076a48577184 Best regards, -- Mark Brown <broonie(a)kernel.org>

2 months, 3 weeks

3
3
0 0

[PATCH] selftests: pidfd: Fix compiling warning of pidfs_setns

by I Hsin Cheng

In the compilation of pidfs_setns_test.c , a warning as the following will pop out. pidfd_setns_test.c: In function ‘current_nsset_setup’: pidfd_setns_test.c:173:54: warning: implicit declaration of function \ ‘ioctl’ [-Wimplicit-function-declaration] 173 | self->child_pidfd_derived_nsfds[i] = \ ioctl(self->pidfd, info->pidfd_ioctl, 0); It's caused by wrong import of header file <linux/ioctl.h>, fix it to <sys/ioctl.h>. Signed-off-by: I Hsin Cheng <richard120310(a)gmail.com> --- tools/testing/selftests/pidfd/pidfd_setns_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/pidfd/pidfd_setns_test.c b/tools/testing/selftests/pidfd/pidfd_setns_test.c index 7c2a43491..3ed42f1eb 100644 --- a/tools/testing/selftests/pidfd/pidfd_setns_test.c +++ b/tools/testing/selftests/pidfd/pidfd_setns_test.c @@ -16,7 +16,7 @@ #include <unistd.h> #include <sys/socket.h> #include <sys/stat.h> -#include <linux/ioctl.h> +#include <sys/ioctl.h> #include "pidfd.h" #include "../clone3/clone3_selftests.h" -- 2.43.0

2 months, 3 weeks

2
1
0 0

[PATCH net 0/2] bonding: fix incorrect mac address setting

by Hangbin Liu

The mac address on backup slave should be convert from Solicited-Node Multicast address, not from bonding unicast target address. Hangbin Liu (2): bonding: fix incorrect MAC address setting to receive NA messages selftests: bonding: fix incorrect mac address drivers/net/bonding/bond_options.c | 4 +++- tools/testing/selftests/drivers/net/bonding/bond_options.sh | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) -- 2.39.5 (Apple Git-154)

2 months, 3 weeks

1
3
0 0

[PATCH 0/2] tools/nolibc: support for 32-bit s390

by Thomas Weißschuh

Support for 32-bit s390 is very easy to implement and useful for testing. For example I used to test some generic compat_ptr() logic, which is only testable on 32-bit s390. The series depends on my other series "selftests/nolibc: test kernel configuration cleanups". (It's not a hard dependency, only a minor diff conflict) Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Thomas Weißschuh (2): selftests/nolibc: rename s390 to s390x tools/nolibc: add support for 32-bit s390 tools/include/nolibc/arch-s390.h | 5 +++++ tools/include/nolibc/arch.h | 2 +- tools/testing/selftests/nolibc/Makefile | 10 ++++++++-- tools/testing/selftests/nolibc/run-tests.sh | 8 +++++++- 4 files changed, 21 insertions(+), 4 deletions(-) --- base-commit: 0597614d84c8593ba906418bf3c0c0de1e02e82a change-id: 20250122-nolibc-s390-e57141682c88 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

2 months, 3 weeks

3
4
0 0

[PATCH net-next] netconsole: selftest: Add test for fragmented messages

by Breno Leitao

Add a new selftest to verify netconsole's handling of messages that exceed the packet size limit and require fragmentation. The test sends messages with varying sizes and userdata, validating that: 1. Large messages are correctly fragmented and reassembled 2. Userdata fields are properly preserved across fragments 3. Messages work correctly with and without kernel release version appending The test creates a networking environment using netdevsim, sends messages through /dev/kmsg, and verifies the received fragments maintain message integrity. Signed-off-by: Breno Leitao <leitao(a)debian.org> Reviewed-by: Simon Horman <horms(a)kernel.org> --- Changes compared to RFC - Removed the long-line comment (Simon) - Added Simon's reviwed-by tag. - Link to v1: https://lore.kernel.org/r/20250131-netcons_frag_msgs-v1-1-0de83bf2a7e6@debi… --- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 7 ++ .../drivers/net/netcons_fragmented_msg.sh | 122 +++++++++++++++++++++ 3 files changed, 130 insertions(+) diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index 137470bdee0c7fd2517bd1baafc12d575de4b4ac..c7f1c443f2af091aa13f67dd1df9ae05d7a43f40 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -7,6 +7,7 @@ TEST_INCLUDES := $(wildcard lib/py/*.py) \ TEST_PROGS := \ netcons_basic.sh \ + netcons_fragmented_msg.sh \ netcons_overflow.sh \ ping.py \ queues.py \ diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh index 3acaba41ac7b21aa2fd8457ed640a5ac8a41bc12..0c262b123fdd3082c40b2bd899ec626d223226ed 100644 --- a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh +++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh @@ -110,6 +110,13 @@ function create_dynamic_target() { echo 1 > "${NETCONS_PATH}"/enabled } +# Do not append the release to the header of the message +function disable_release_append() { + echo 0 > "${NETCONS_PATH}"/enabled + echo 0 > "${NETCONS_PATH}"/release + echo 1 > "${NETCONS_PATH}"/enabled +} + function cleanup() { local NSIM_DEV_SYS_DEL="/sys/bus/netdevsim/del_device" diff --git a/tools/testing/selftests/drivers/net/netcons_fragmented_msg.sh b/tools/testing/selftests/drivers/net/netcons_fragmented_msg.sh new file mode 100755 index 0000000000000000000000000000000000000000..4a71e01a230c75c14147a9937920fe0b68a0926a --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_fragmented_msg.sh @@ -0,0 +1,122 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# Test netconsole's message fragmentation functionality. +# +# When a message exceeds the maximum packet size, netconsole splits it into +# multiple fragments for transmission. This test verifies: +# - Correct fragmentation of large messages +# - Proper reassembly of fragments at the receiver +# - Preservation of userdata across fragments +# - Behavior with and without kernel release version appending +# +# Author: Breno Leitao <leitao(a)debian.org> + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +source "${SCRIPTDIR}"/lib/sh/lib_netcons.sh + +modprobe netdevsim 2> /dev/null || true +modprobe netconsole 2> /dev/null || true + +# The content of kmsg will be save to the following file +OUTPUT_FILE="/tmp/${TARGET}" + +# set userdata to a long value. In this case, it is "1-2-3-4...50-" +USERDATA_VALUE=$(printf -- '%.2s-' {1..60}) + +# Convert the header string in a regexp, so, we can remove +# the second header as well. +# A header looks like "13,468,514729715,-,ncfrag=0/1135;". If +# release is appended, you might find something like:L +# "6.13.0-04048-g4f561a87745a,13,468,514729715,-,ncfrag=0/1135;" +function header_to_regex() { + # header is everything before ; + local HEADER="${1}" + REGEX=$(echo "${HEADER}" | cut -d'=' -f1) + echo "${REGEX}=[0-9]*\/[0-9]*;" +} + +# We have two headers in the message. Remove both to get the full message, +# and extract the full message. +function extract_msg() { + local MSGFILE="${1}" + # Extract the header, which is the very first thing that arrives in the + # first list. + HEADER=$(sed -n '1p' "${MSGFILE}" | cut -d';' -f1) + HEADER_REGEX=$(header_to_regex "${HEADER}") + + # Remove the two headers from the received message + # This will return the message without any header, similarly to what + # was sent. + sed "s/""${HEADER_REGEX}""//g" "${MSGFILE}" +} + +# Validate the message, which has two messages glued together. +# unwrap them to make sure all the characters were transmitted. +# File will look like the following: +# 13,468,514729715,-,ncfrag=0/1135;<message> +# key=<part of key>-13,468,514729715,-,ncfrag=967/1135;<rest of the key> +function validate_fragmented_result() { + # Discard the netconsole headers, and assemble the full message + RCVMSG=$(extract_msg "${1}") + + # check for the main message + if ! echo "${RCVMSG}" | grep -q "${MSG}"; then + echo "Message body doesn't match." >&2 + echo "msg received=" "${RCVMSG}" >&2 + exit "${ksft_fail}" + fi + + # check userdata + if ! echo "${RCVMSG}" | grep -q "${USERDATA_VALUE}"; then + echo "message userdata doesn't match" >&2 + echo "msg received=" "${RCVMSG}" >&2 + exit "${ksft_fail}" + fi + # test passed. hooray +} + +# Check for basic system dependency and exit if not found +check_for_dependencies +# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5) +echo "6 5" > /proc/sys/kernel/printk +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup EXIT +# Create one namespace and two interfaces +set_network +# Create a dynamic target for netconsole +create_dynamic_target +# Set userdata "key" with the "value" value +set_user_data + + +# TEST 1: Send message and userdata. They will fragment +# ======= +MSG=$(printf -- 'MSG%.3s=' {1..150}) + +# Listen for netconsole port inside the namespace and destination interface +listen_port_and_save_to "${OUTPUT_FILE}" & +# Wait for socat to start and listen to the port. +wait_local_port_listen "${NAMESPACE}" "${PORT}" udp +# Send the message +echo "${MSG}: ${TARGET}" > /dev/kmsg +# Wait until socat saves the file to disk +busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" +# Check if the message was not corrupted +validate_fragmented_result "${OUTPUT_FILE}" + +# TEST 2: Test with smaller message, and without release appended +# ======= +MSG=$(printf -- 'FOOBAR%.3s=' {1..100}) +# Let's disable release and test again. +disable_release_append + +listen_port_and_save_to "${OUTPUT_FILE}" & +wait_local_port_listen "${NAMESPACE}" "${PORT}" udp +echo "${MSG}: ${TARGET}" > /dev/kmsg +busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" +validate_fragmented_result "${OUTPUT_FILE}" +exit "${ksft_pass}" --- base-commit: 0ad9617c78acbc71373fb341a6f75d4012b01d69 change-id: 20250129-netcons_frag_msgs-91506d136f50 Best regards, -- Breno Leitao <leitao(a)debian.org>

2 months, 3 weeks

2
1
0 0

[PATCH] selftests/cgroup: use bash in test_cpuset_v1_hp.sh

by Bharadwaj Raju

The script uses non-POSIX features like `[[` for conditionals and hence does not work when run with a POSIX /bin/sh. Change the shebang to /bin/bash instead, like the other tests in cgroup. Signed-off-by: Bharadwaj Raju <bharadwaj.raju777(a)gmail.com> --- tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh b/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh index 3f45512fb512..7406c24be1ac 100755 --- a/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh +++ b/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh @@ -1,4 +1,4 @@ -#!/bin/sh +#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # # Test the special cpuset v1 hotplug case where a cpuset become empty of -- 2.43.0

2 months, 3 weeks

2
1
0 0

[PATCH v3 0/2] EDITME: cover title for scanf-kunit-convert

by Tamir Duberstein

This is one of just 3 remaining "Test Module" kselftests (the others being bitmap and printf), the rest having been converted to KUnit. In addition to the enclosed patch, please consider this an RFC on the removal of the "Test Module" kselftest machinery. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 scanf Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v3: - Reduce diff noise in lib/Makefile. (Petr Mladek) - Split `scanf_test` into a few test cases. New output: : =================== scanf (10 subtests) ==================== : [PASSED] numbers_simple : ====================== numbers_list ======================= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ================== [PASSED] numbers_list =================== : ============ numbers_list_field_width_typemax ============= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======== [PASSED] numbers_list_field_width_typemax ========= : =========== numbers_list_field_width_val_width ============ : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======= [PASSED] numbers_list_field_width_val_width ======== : [PASSED] numbers_slice : [PASSED] numbers_prefix_overflow : [PASSED] test_simple_strtoull : [PASSED] test_simple_strtoll : [PASSED] test_simple_strtoul : [PASSED] test_simple_strtol : ====================== [PASSED] scanf ====================== : ============================================================ : Testing complete. Ran 22 tests: passed: 22 : Elapsed time: 5.517s total, 0.001s configuring, 5.440s building, 0.067s running - Link to v2: https://lore.kernel.org/r/20250203-scanf-kunit-convert-v2-1-277a618d804e@gm… Changes in v2: - Rename lib/{test_scanf.c => scanf_kunit.c}. (Andy Shevchenko) - Link to v1: https://lore.kernel.org/r/20250131-scanf-kunit-convert-v1-1-0976524f0eba@gm… --- Tamir Duberstein (2): scanf: convert self-test to KUnit scanf: break kunit into test cases MAINTAINERS | 2 +- arch/m68k/configs/amiga_defconfig | 1 - arch/m68k/configs/apollo_defconfig | 1 - arch/m68k/configs/atari_defconfig | 1 - arch/m68k/configs/bvme6000_defconfig | 1 - arch/m68k/configs/hp300_defconfig | 1 - arch/m68k/configs/mac_defconfig | 1 - arch/m68k/configs/multi_defconfig | 1 - arch/m68k/configs/mvme147_defconfig | 1 - arch/m68k/configs/mvme16x_defconfig | 1 - arch/m68k/configs/q40_defconfig | 1 - arch/m68k/configs/sun3_defconfig | 1 - arch/m68k/configs/sun3x_defconfig | 1 - arch/powerpc/configs/ppc64_defconfig | 1 - lib/Kconfig.debug | 20 +- lib/Makefile | 2 +- lib/scanf_kunit.c | 800 ++++++++++++++++++++++++++++++++++ lib/test_scanf.c | 814 ----------------------------------- tools/testing/selftests/lib/Makefile | 2 +- tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/scanf.sh | 4 - 21 files changed, 820 insertions(+), 838 deletions(-) --- base-commit: a86bf2283d2c9769205407e2b54777c03d012939 change-id: 20250131-scanf-kunit-convert-f70dc33bb34c Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 3 weeks

1
3
0 0

[PATCH v2] scanf: convert self-test to KUnit

by Tamir Duberstein

Convert the scanf() self-test to a KUnit test. In the interest of keeping the patch reasonably-sized this doesn't refactor the tests into proper parameterized tests - it's all one big test case. Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> Acked-by: Geert Uytterhoeven <geert(a)linux-m68k.org> # m68k --- This is one of just 3 remaining "Test Module" kselftests (the others being bitmap and printf), the rest having been converted to KUnit. In addition to the enclosed patch, please consider this an RFC on the removal of the "Test Module" kselftest machinery. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 scanf --- Changes in v2: - Rename lib/{test_scanf.c => scanf_kunit.c}. (Andy Shevchenko) - Link to v1: https://lore.kernel.org/r/20250131-scanf-kunit-convert-v1-1-0976524f0eba@gm… --- MAINTAINERS | 2 +- arch/m68k/configs/amiga_defconfig | 1 - arch/m68k/configs/apollo_defconfig | 1 - arch/m68k/configs/atari_defconfig | 1 - arch/m68k/configs/bvme6000_defconfig | 1 - arch/m68k/configs/hp300_defconfig | 1 - arch/m68k/configs/mac_defconfig | 1 - arch/m68k/configs/multi_defconfig | 1 - arch/m68k/configs/mvme147_defconfig | 1 - arch/m68k/configs/mvme16x_defconfig | 1 - arch/m68k/configs/q40_defconfig | 1 - arch/m68k/configs/sun3_defconfig | 1 - arch/m68k/configs/sun3x_defconfig | 1 - arch/powerpc/configs/ppc64_defconfig | 1 - lib/Kconfig.debug | 20 +- lib/Makefile | 4 +- lib/{test_scanf.c => scanf_kunit.c} | 704 +++++++++++++++++------------------ tools/testing/selftests/lib/Makefile | 2 +- tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/scanf.sh | 4 - 20 files changed, 360 insertions(+), 390 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ab7463b2f165..7c6eb5dc0470 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -25358,8 +25358,8 @@ R: Sergey Senozhatsky <senozhatsky(a)chromium.org> S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux.git F: Documentation/core-api/printk-formats.rst +F: lib/scanf_kunit.c F: lib/test_printf.c -F: lib/test_scanf.c F: lib/vsprintf.c VT1211 HARDWARE MONITOR DRIVER diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index dbf2ea561c85..e85a4b3a9847 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -623,7 +623,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index b0fd199cc0a4..232b885cc26e 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -580,7 +580,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index bb5b2d3b6c10..228af5b4cd42 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -600,7 +600,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 8315a13bab73..cbc59aed3d97 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -572,7 +572,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 350370657e5f..8d3787b8fe6d 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -582,7 +582,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index f942b4755702..a68893d83361 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -599,7 +599,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index b1eaad02efab..9a17526cefd2 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -686,7 +686,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 6309a4442bb3..5cf2e2860044 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -572,7 +572,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 3feb0731f814..eb395749bc75 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -573,7 +573,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index ea04b1b0da7d..8891f12c2a18 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -589,7 +589,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index f52d9af92153..a49ff5330e5b 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -569,7 +569,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index f348447824da..3022ff492136 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -570,7 +570,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 465eb96c755e..819387cbbe69 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -445,7 +445,6 @@ CONFIG_STRING_SELFTEST=m CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 1af972a92d06..716c4ef857bb 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2427,6 +2427,23 @@ config ASYNC_RAID6_TEST config TEST_HEXDUMP tristate "Test functions located in the hexdump module at runtime" +config SCANF_KUNIT_TEST + tristate "KUnit test scanf() family of functions at runtime" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + help + Enable this option to test the scanf functions at boot. + + KUnit tests run during boot and output the results to the debug log + in TAP format (http://testanything.org/). Only useful for kernel devs + running the KUnit test harness, and not intended for inclusion into a + production build. + + For more information on KUnit and unit tests in general please refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + + If unsure, say N. + config STRING_KUNIT_TEST tristate "KUnit test string functions at runtime" if !KUNIT_ALL_TESTS depends on KUNIT @@ -2443,9 +2460,6 @@ config TEST_KSTRTOX config TEST_PRINTF tristate "Test printf() family of functions at runtime" -config TEST_SCANF - tristate "Test scanf() family of functions at runtime" - config TEST_BITMAP tristate "Test bitmap_*() family of functions at runtime" help diff --git a/lib/Makefile b/lib/Makefile index d5cfc7afbbb8..a53cf6dd1505 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -85,7 +85,6 @@ obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o obj-$(CONFIG_TEST_DYNAMIC_DEBUG) += test_dynamic_debug.o obj-$(CONFIG_TEST_PRINTF) += test_printf.o -obj-$(CONFIG_TEST_SCANF) += test_scanf.o obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o ifeq ($(CONFIG_CC_IS_CLANG)$(CONFIG_KASAN),yy) @@ -373,8 +372,9 @@ CFLAGS_bitfield_kunit.o := $(DISABLE_STRUCTLEAK_PLUGIN) obj-$(CONFIG_BITFIELD_KUNIT) += bitfield_kunit.o obj-$(CONFIG_CHECKSUM_KUNIT) += checksum_kunit.o obj-$(CONFIG_UTIL_MACROS_KUNIT) += util_macros_kunit.o -obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o obj-$(CONFIG_HASHTABLE_KUNIT_TEST) += hashtable_test.o +obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o +obj-$(CONFIG_SCANF_KUNIT_TEST) += scanf_kunit.o obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o obj-$(CONFIG_BITS_TEST) += test_bits.o obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o diff --git a/lib/test_scanf.c b/lib/scanf_kunit.c similarity index 30% rename from lib/test_scanf.c rename to lib/scanf_kunit.c index 44f8508c9d88..70364ce20ec3 100644 --- a/lib/test_scanf.c +++ b/lib/scanf_kunit.c @@ -5,8 +5,8 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <kunit/test.h> #include <linux/bitops.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/overflow.h> @@ -15,148 +15,123 @@ #include <linux/slab.h> #include <linux/string.h> -#include "../tools/testing/selftests/kselftest_module.h" - #define BUF_SIZE 1024 -KSTM_MODULE_GLOBALS(); -static char *test_buffer __initdata; -static char *fmt_buffer __initdata; -static struct rnd_state rnd_state __initdata; +static char *test_buffer; +static char *fmt_buffer; +static struct rnd_state rnd_state; -typedef int (*check_fn)(const void *check_data, const char *string, +typedef void (*check_fn)(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap); -static void __scanf(4, 6) __init -_test(check_fn fn, const void *check_data, const char *string, const char *fmt, +static void __scanf(5, 7) +_test(struct kunit *test, check_fn fn, const void *check_data, const char *string, const char *fmt, int n_args, ...) { va_list ap, ap_copy; - int ret; - - total_tests++; va_start(ap, n_args); va_copy(ap_copy, ap); - ret = vsscanf(string, fmt, ap_copy); + KUNIT_EXPECT_EQ_MSG(test, vsscanf(string, fmt, ap_copy), n_args, + "vsscanf(\"%s\", \"%s\", ...)", string, fmt); va_end(ap_copy); - if (ret != n_args) { - pr_warn("vsscanf(\"%s\", \"%s\", ...) returned %d expected %d\n", - string, fmt, ret, n_args); - goto fail; - } - - ret = (*fn)(check_data, string, fmt, n_args, ap); - if (ret) - goto fail; - - va_end(ap); - - return; - -fail: - failed_tests++; + (*fn)(test, check_data, string, fmt, n_args, ap); va_end(ap); } -#define _check_numbers_template(arg_fmt, expect, str, fmt, n_args, ap) \ +#define _check_numbers_template(test, arg_fmt, expect, str, fmt, n_args, ap) \ do { \ pr_debug("\"%s\", \"%s\" ->\n", str, fmt); \ for (; n_args > 0; n_args--, expect++) { \ typeof(*expect) got = *va_arg(ap, typeof(expect)); \ pr_debug("\t" arg_fmt "\n", got); \ - if (got != *expect) { \ - pr_warn("vsscanf(\"%s\", \"%s\", ...) expected " arg_fmt " got " arg_fmt "\n", \ - str, fmt, *expect, got); \ - return 1; \ - } \ + KUNIT_EXPECT_EQ_MSG(test, got, *expect, "vsscanf(\"%s\", \"%s\", ...)", str, fmt); \ } \ - return 0; \ } while (0) -static int __init check_ull(const void *check_data, const char *string, +static void check_ull(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const unsigned long long *pval = check_data; - _check_numbers_template("%llu", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%llu", pval, string, fmt, n_args, ap); } -static int __init check_ll(const void *check_data, const char *string, +static void check_ll(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const long long *pval = check_data; - _check_numbers_template("%lld", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%lld", pval, string, fmt, n_args, ap); } -static int __init check_ulong(const void *check_data, const char *string, +static void check_ulong(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const unsigned long *pval = check_data; - _check_numbers_template("%lu", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%lu", pval, string, fmt, n_args, ap); } -static int __init check_long(const void *check_data, const char *string, +static void check_long(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const long *pval = check_data; - _check_numbers_template("%ld", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%ld", pval, string, fmt, n_args, ap); } -static int __init check_uint(const void *check_data, const char *string, +static void check_uint(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const unsigned int *pval = check_data; - _check_numbers_template("%u", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%u", pval, string, fmt, n_args, ap); } -static int __init check_int(const void *check_data, const char *string, +static void check_int(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const int *pval = check_data; - _check_numbers_template("%d", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%d", pval, string, fmt, n_args, ap); } -static int __init check_ushort(const void *check_data, const char *string, +static void check_ushort(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const unsigned short *pval = check_data; - _check_numbers_template("%hu", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%hu", pval, string, fmt, n_args, ap); } -static int __init check_short(const void *check_data, const char *string, +static void check_short(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const short *pval = check_data; - _check_numbers_template("%hd", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%hd", pval, string, fmt, n_args, ap); } -static int __init check_uchar(const void *check_data, const char *string, +static void check_uchar(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const unsigned char *pval = check_data; - _check_numbers_template("%hhu", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%hhu", pval, string, fmt, n_args, ap); } -static int __init check_char(const void *check_data, const char *string, +static void check_char(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const signed char *pval = check_data; - _check_numbers_template("%hhd", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%hhd", pval, string, fmt, n_args, ap); } /* Selection of interesting numbers to test, copied from test-kstrtox.c */ -static const unsigned long long numbers[] __initconst = { +static const unsigned long long numbers[] = { 0x0ULL, 0x1ULL, 0x7fULL, @@ -190,76 +165,76 @@ static const unsigned long long numbers[] __initconst = { : ((unsigned long long)(val) <= type_max(T))) -#define test_one_number(T, gen_fmt, scan_fmt, val, fn) \ -do { \ - const T expect_val = (T)(val); \ - T result = ~expect_val; /* should be overwritten */ \ - \ - snprintf(test_buffer, BUF_SIZE, gen_fmt, expect_val); \ - _test(fn, &expect_val, test_buffer, "%" scan_fmt, 1, &result); \ +#define test_one_number(test, T, gen_fmt, scan_fmt, val, fn) \ +do { \ + const T expect_val = (T)(val); \ + T result = ~expect_val; /* should be overwritten */ \ + \ + snprintf(test_buffer, BUF_SIZE, gen_fmt, expect_val); \ + _test(test, fn, &expect_val, test_buffer, "%" scan_fmt, 1, &result); \ } while (0) -#define simple_numbers_loop(T, gen_fmt, scan_fmt, fn) \ +#define simple_numbers_loop(test, T, gen_fmt, scan_fmt, fn) \ do { \ int i; \ \ for (i = 0; i < ARRAY_SIZE(numbers); i++) { \ if (value_representable_in_type(T, numbers[i])) \ - test_one_number(T, gen_fmt, scan_fmt, \ + test_one_number(test, T, gen_fmt, scan_fmt, \ numbers[i], fn); \ \ if (value_representable_in_type(T, -numbers[i])) \ - test_one_number(T, gen_fmt, scan_fmt, \ + test_one_number(test, T, gen_fmt, scan_fmt, \ -numbers[i], fn); \ } \ } while (0) -static void __init numbers_simple(void) -{ - simple_numbers_loop(unsigned long long, "%llu", "llu", check_ull); - simple_numbers_loop(long long, "%lld", "lld", check_ll); - simple_numbers_loop(long long, "%lld", "lli", check_ll); - simple_numbers_loop(unsigned long long, "%llx", "llx", check_ull); - simple_numbers_loop(long long, "%llx", "llx", check_ll); - simple_numbers_loop(long long, "0x%llx", "lli", check_ll); - simple_numbers_loop(unsigned long long, "0x%llx", "llx", check_ull); - simple_numbers_loop(long long, "0x%llx", "llx", check_ll); - - simple_numbers_loop(unsigned long, "%lu", "lu", check_ulong); - simple_numbers_loop(long, "%ld", "ld", check_long); - simple_numbers_loop(long, "%ld", "li", check_long); - simple_numbers_loop(unsigned long, "%lx", "lx", check_ulong); - simple_numbers_loop(long, "%lx", "lx", check_long); - simple_numbers_loop(long, "0x%lx", "li", check_long); - simple_numbers_loop(unsigned long, "0x%lx", "lx", check_ulong); - simple_numbers_loop(long, "0x%lx", "lx", check_long); - - simple_numbers_loop(unsigned int, "%u", "u", check_uint); - simple_numbers_loop(int, "%d", "d", check_int); - simple_numbers_loop(int, "%d", "i", check_int); - simple_numbers_loop(unsigned int, "%x", "x", check_uint); - simple_numbers_loop(int, "%x", "x", check_int); - simple_numbers_loop(int, "0x%x", "i", check_int); - simple_numbers_loop(unsigned int, "0x%x", "x", check_uint); - simple_numbers_loop(int, "0x%x", "x", check_int); - - simple_numbers_loop(unsigned short, "%hu", "hu", check_ushort); - simple_numbers_loop(short, "%hd", "hd", check_short); - simple_numbers_loop(short, "%hd", "hi", check_short); - simple_numbers_loop(unsigned short, "%hx", "hx", check_ushort); - simple_numbers_loop(short, "%hx", "hx", check_short); - simple_numbers_loop(short, "0x%hx", "hi", check_short); - simple_numbers_loop(unsigned short, "0x%hx", "hx", check_ushort); - simple_numbers_loop(short, "0x%hx", "hx", check_short); - - simple_numbers_loop(unsigned char, "%hhu", "hhu", check_uchar); - simple_numbers_loop(signed char, "%hhd", "hhd", check_char); - simple_numbers_loop(signed char, "%hhd", "hhi", check_char); - simple_numbers_loop(unsigned char, "%hhx", "hhx", check_uchar); - simple_numbers_loop(signed char, "%hhx", "hhx", check_char); - simple_numbers_loop(signed char, "0x%hhx", "hhi", check_char); - simple_numbers_loop(unsigned char, "0x%hhx", "hhx", check_uchar); - simple_numbers_loop(signed char, "0x%hhx", "hhx", check_char); +static void numbers_simple(struct kunit *test) +{ + simple_numbers_loop(test, unsigned long long, "%llu", "llu", check_ull); + simple_numbers_loop(test, long long, "%lld", "lld", check_ll); + simple_numbers_loop(test, long long, "%lld", "lli", check_ll); + simple_numbers_loop(test, unsigned long long, "%llx", "llx", check_ull); + simple_numbers_loop(test, long long, "%llx", "llx", check_ll); + simple_numbers_loop(test, long long, "0x%llx", "lli", check_ll); + simple_numbers_loop(test, unsigned long long, "0x%llx", "llx", check_ull); + simple_numbers_loop(test, long long, "0x%llx", "llx", check_ll); + + simple_numbers_loop(test, unsigned long, "%lu", "lu", check_ulong); + simple_numbers_loop(test, long, "%ld", "ld", check_long); + simple_numbers_loop(test, long, "%ld", "li", check_long); + simple_numbers_loop(test, unsigned long, "%lx", "lx", check_ulong); + simple_numbers_loop(test, long, "%lx", "lx", check_long); + simple_numbers_loop(test, long, "0x%lx", "li", check_long); + simple_numbers_loop(test, unsigned long, "0x%lx", "lx", check_ulong); + simple_numbers_loop(test, long, "0x%lx", "lx", check_long); + + simple_numbers_loop(test, unsigned int, "%u", "u", check_uint); + simple_numbers_loop(test, int, "%d", "d", check_int); + simple_numbers_loop(test, int, "%d", "i", check_int); + simple_numbers_loop(test, unsigned int, "%x", "x", check_uint); + simple_numbers_loop(test, int, "%x", "x", check_int); + simple_numbers_loop(test, int, "0x%x", "i", check_int); + simple_numbers_loop(test, unsigned int, "0x%x", "x", check_uint); + simple_numbers_loop(test, int, "0x%x", "x", check_int); + + simple_numbers_loop(test, unsigned short, "%hu", "hu", check_ushort); + simple_numbers_loop(test, short, "%hd", "hd", check_short); + simple_numbers_loop(test, short, "%hd", "hi", check_short); + simple_numbers_loop(test, unsigned short, "%hx", "hx", check_ushort); + simple_numbers_loop(test, short, "%hx", "hx", check_short); + simple_numbers_loop(test, short, "0x%hx", "hi", check_short); + simple_numbers_loop(test, unsigned short, "0x%hx", "hx", check_ushort); + simple_numbers_loop(test, short, "0x%hx", "hx", check_short); + + simple_numbers_loop(test, unsigned char, "%hhu", "hhu", check_uchar); + simple_numbers_loop(test, signed char, "%hhd", "hhd", check_char); + simple_numbers_loop(test, signed char, "%hhd", "hhi", check_char); + simple_numbers_loop(test, unsigned char, "%hhx", "hhx", check_uchar); + simple_numbers_loop(test, signed char, "%hhx", "hhx", check_char); + simple_numbers_loop(test, signed char, "0x%hhx", "hhi", check_char); + simple_numbers_loop(test, unsigned char, "0x%hhx", "hhx", check_uchar); + simple_numbers_loop(test, signed char, "0x%hhx", "hhx", check_char); } /* @@ -267,14 +242,14 @@ static void __init numbers_simple(void) * the raw prandom*() functions (Not mathematically rigorous!!). * Variabilty of length and value is more important than perfect randomness. */ -static u32 __init next_test_random(u32 max_bits) +static u32 next_test_random(u32 max_bits) { u32 n_bits = hweight32(prandom_u32_state(&rnd_state)) % (max_bits + 1); return prandom_u32_state(&rnd_state) & GENMASK(n_bits, 0); } -static unsigned long long __init next_test_random_ull(void) +static unsigned long long next_test_random_ull(void) { u32 rand1 = prandom_u32_state(&rnd_state); u32 n_bits = (hweight32(rand1) * 3) % 64; @@ -311,7 +286,7 @@ do { \ * updating buf_pos and returning the number of characters appended. * On error buf_pos is not changed and return value is 0. */ -static int __init __printf(4, 5) +static int __printf(4, 5) append_fmt(char *buf, int *buf_pos, int buf_len, const char *val_fmt, ...) { va_list ap; @@ -333,7 +308,7 @@ append_fmt(char *buf, int *buf_pos, int buf_len, const char *val_fmt, ...) * Convenience function to append the field delimiter string * to both the value string and format string buffers. */ -static void __init append_delim(char *str_buf, int *str_buf_pos, int str_buf_len, +static void append_delim(char *str_buf, int *str_buf_pos, int str_buf_len, char *fmt_buf, int *fmt_buf_pos, int fmt_buf_len, const char *delim_str) { @@ -341,15 +316,15 @@ static void __init append_delim(char *str_buf, int *str_buf_pos, int str_buf_len append_fmt(fmt_buf, fmt_buf_pos, fmt_buf_len, delim_str); } -#define test_array_8(fn, check_data, string, fmt, arr) \ +#define test_array_8(test, fn, check_data, string, fmt, arr) \ do { \ BUILD_BUG_ON(ARRAY_SIZE(arr) != 8); \ - _test(fn, check_data, string, fmt, 8, \ + _test(test, fn, check_data, string, fmt, 8, \ &(arr)[0], &(arr)[1], &(arr)[2], &(arr)[3], \ &(arr)[4], &(arr)[5], &(arr)[6], &(arr)[7]); \ } while (0) -#define numbers_list_8(T, gen_fmt, field_sep, scan_fmt, fn) \ +#define numbers_list_8(test, T, gen_fmt, field_sep, scan_fmt, fn) \ do { \ int i, pos = 0, fmt_pos = 0; \ T expect[8], result[8]; \ @@ -366,18 +341,18 @@ do { \ append_fmt(fmt_buffer, &fmt_pos, BUF_SIZE, "%%%s", scan_fmt); \ } \ \ - test_array_8(fn, expect, test_buffer, fmt_buffer, result); \ + test_array_8(test, fn, expect, test_buffer, fmt_buffer, result); \ } while (0) -#define numbers_list_fix_width(T, gen_fmt, field_sep, width, scan_fmt, fn) \ +#define numbers_list_fix_width(test, T, gen_fmt, field_sep, width, scan_fmt, fn)\ do { \ char full_fmt[16]; \ \ snprintf(full_fmt, sizeof(full_fmt), "%u%s", width, scan_fmt); \ - numbers_list_8(T, gen_fmt, field_sep, full_fmt, fn); \ + numbers_list_8(test, T, gen_fmt, field_sep, full_fmt, fn); \ } while (0) -#define numbers_list_val_width(T, gen_fmt, field_sep, scan_fmt, fn) \ +#define numbers_list_val_width(test, T, gen_fmt, field_sep, scan_fmt, fn) \ do { \ int i, val_len, pos = 0, fmt_pos = 0; \ T expect[8], result[8]; \ @@ -395,201 +370,201 @@ do { \ "%%%u%s", val_len, scan_fmt); \ } \ \ - test_array_8(fn, expect, test_buffer, fmt_buffer, result); \ + test_array_8(test, fn, expect, test_buffer, fmt_buffer, result); \ } while (0) -static void __init numbers_list_ll(const char *delim) +static void numbers_list_ll(struct kunit *test, const char *delim) { - numbers_list_8(unsigned long long, "%llu", delim, "llu", check_ull); - numbers_list_8(long long, "%lld", delim, "lld", check_ll); - numbers_list_8(long long, "%lld", delim, "lli", check_ll); - numbers_list_8(unsigned long long, "%llx", delim, "llx", check_ull); - numbers_list_8(unsigned long long, "0x%llx", delim, "llx", check_ull); - numbers_list_8(long long, "0x%llx", delim, "lli", check_ll); + numbers_list_8(test, unsigned long long, "%llu", delim, "llu", check_ull); + numbers_list_8(test, long long, "%lld", delim, "lld", check_ll); + numbers_list_8(test, long long, "%lld", delim, "lli", check_ll); + numbers_list_8(test, unsigned long long, "%llx", delim, "llx", check_ull); + numbers_list_8(test, unsigned long long, "0x%llx", delim, "llx", check_ull); + numbers_list_8(test, long long, "0x%llx", delim, "lli", check_ll); } -static void __init numbers_list_l(const char *delim) +static void numbers_list_l(struct kunit *test, const char *delim) { - numbers_list_8(unsigned long, "%lu", delim, "lu", check_ulong); - numbers_list_8(long, "%ld", delim, "ld", check_long); - numbers_list_8(long, "%ld", delim, "li", check_long); - numbers_list_8(unsigned long, "%lx", delim, "lx", check_ulong); - numbers_list_8(unsigned long, "0x%lx", delim, "lx", check_ulong); - numbers_list_8(long, "0x%lx", delim, "li", check_long); + numbers_list_8(test, unsigned long, "%lu", delim, "lu", check_ulong); + numbers_list_8(test, long, "%ld", delim, "ld", check_long); + numbers_list_8(test, long, "%ld", delim, "li", check_long); + numbers_list_8(test, unsigned long, "%lx", delim, "lx", check_ulong); + numbers_list_8(test, unsigned long, "0x%lx", delim, "lx", check_ulong); + numbers_list_8(test, long, "0x%lx", delim, "li", check_long); } -static void __init numbers_list_d(const char *delim) +static void numbers_list_d(struct kunit *test, const char *delim) { - numbers_list_8(unsigned int, "%u", delim, "u", check_uint); - numbers_list_8(int, "%d", delim, "d", check_int); - numbers_list_8(int, "%d", delim, "i", check_int); - numbers_list_8(unsigned int, "%x", delim, "x", check_uint); - numbers_list_8(unsigned int, "0x%x", delim, "x", check_uint); - numbers_list_8(int, "0x%x", delim, "i", check_int); + numbers_list_8(test, unsigned int, "%u", delim, "u", check_uint); + numbers_list_8(test, int, "%d", delim, "d", check_int); + numbers_list_8(test, int, "%d", delim, "i", check_int); + numbers_list_8(test, unsigned int, "%x", delim, "x", check_uint); + numbers_list_8(test, unsigned int, "0x%x", delim, "x", check_uint); + numbers_list_8(test, int, "0x%x", delim, "i", check_int); } -static void __init numbers_list_h(const char *delim) +static void numbers_list_h(struct kunit *test, const char *delim) { - numbers_list_8(unsigned short, "%hu", delim, "hu", check_ushort); - numbers_list_8(short, "%hd", delim, "hd", check_short); - numbers_list_8(short, "%hd", delim, "hi", check_short); - numbers_list_8(unsigned short, "%hx", delim, "hx", check_ushort); - numbers_list_8(unsigned short, "0x%hx", delim, "hx", check_ushort); - numbers_list_8(short, "0x%hx", delim, "hi", check_short); + numbers_list_8(test, unsigned short, "%hu", delim, "hu", check_ushort); + numbers_list_8(test, short, "%hd", delim, "hd", check_short); + numbers_list_8(test, short, "%hd", delim, "hi", check_short); + numbers_list_8(test, unsigned short, "%hx", delim, "hx", check_ushort); + numbers_list_8(test, unsigned short, "0x%hx", delim, "hx", check_ushort); + numbers_list_8(test, short, "0x%hx", delim, "hi", check_short); } -static void __init numbers_list_hh(const char *delim) +static void numbers_list_hh(struct kunit *test, const char *delim) { - numbers_list_8(unsigned char, "%hhu", delim, "hhu", check_uchar); - numbers_list_8(signed char, "%hhd", delim, "hhd", check_char); - numbers_list_8(signed char, "%hhd", delim, "hhi", check_char); - numbers_list_8(unsigned char, "%hhx", delim, "hhx", check_uchar); - numbers_list_8(unsigned char, "0x%hhx", delim, "hhx", check_uchar); - numbers_list_8(signed char, "0x%hhx", delim, "hhi", check_char); + numbers_list_8(test, unsigned char, "%hhu", delim, "hhu", check_uchar); + numbers_list_8(test, signed char, "%hhd", delim, "hhd", check_char); + numbers_list_8(test, signed char, "%hhd", delim, "hhi", check_char); + numbers_list_8(test, unsigned char, "%hhx", delim, "hhx", check_uchar); + numbers_list_8(test, unsigned char, "0x%hhx", delim, "hhx", check_uchar); + numbers_list_8(test, signed char, "0x%hhx", delim, "hhi", check_char); } -static void __init numbers_list(const char *delim) +static void numbers_list(struct kunit *test, const char *delim) { - numbers_list_ll(delim); - numbers_list_l(delim); - numbers_list_d(delim); - numbers_list_h(delim); - numbers_list_hh(delim); + numbers_list_ll(test, delim); + numbers_list_l(test, delim); + numbers_list_d(test, delim); + numbers_list_h(test, delim); + numbers_list_hh(test, delim); } -static void __init numbers_list_field_width_ll(const char *delim) +static void numbers_list_field_width_ll(struct kunit *test, const char *delim) { - numbers_list_fix_width(unsigned long long, "%llu", delim, 20, "llu", check_ull); - numbers_list_fix_width(long long, "%lld", delim, 20, "lld", check_ll); - numbers_list_fix_width(long long, "%lld", delim, 20, "lli", check_ll); - numbers_list_fix_width(unsigned long long, "%llx", delim, 16, "llx", check_ull); - numbers_list_fix_width(unsigned long long, "0x%llx", delim, 18, "llx", check_ull); - numbers_list_fix_width(long long, "0x%llx", delim, 18, "lli", check_ll); + numbers_list_fix_width(test, unsigned long long, "%llu", delim, 20, "llu", check_ull); + numbers_list_fix_width(test, long long, "%lld", delim, 20, "lld", check_ll); + numbers_list_fix_width(test, long long, "%lld", delim, 20, "lli", check_ll); + numbers_list_fix_width(test, unsigned long long, "%llx", delim, 16, "llx", check_ull); + numbers_list_fix_width(test, unsigned long long, "0x%llx", delim, 18, "llx", check_ull); + numbers_list_fix_width(test, long long, "0x%llx", delim, 18, "lli", check_ll); } -static void __init numbers_list_field_width_l(const char *delim) +static void numbers_list_field_width_l(struct kunit *test, const char *delim) { #if BITS_PER_LONG == 64 - numbers_list_fix_width(unsigned long, "%lu", delim, 20, "lu", check_ulong); - numbers_list_fix_width(long, "%ld", delim, 20, "ld", check_long); - numbers_list_fix_width(long, "%ld", delim, 20, "li", check_long); - numbers_list_fix_width(unsigned long, "%lx", delim, 16, "lx", check_ulong); - numbers_list_fix_width(unsigned long, "0x%lx", delim, 18, "lx", check_ulong); - numbers_list_fix_width(long, "0x%lx", delim, 18, "li", check_long); + numbers_list_fix_width(test, unsigned long, "%lu", delim, 20, "lu", check_ulong); + numbers_list_fix_width(test, long, "%ld", delim, 20, "ld", check_long); + numbers_list_fix_width(test, long, "%ld", delim, 20, "li", check_long); + numbers_list_fix_width(test, unsigned long, "%lx", delim, 16, "lx", check_ulong); + numbers_list_fix_width(test, unsigned long, "0x%lx", delim, 18, "lx", check_ulong); + numbers_list_fix_width(test, long, "0x%lx", delim, 18, "li", check_long); #else - numbers_list_fix_width(unsigned long, "%lu", delim, 10, "lu", check_ulong); - numbers_list_fix_width(long, "%ld", delim, 11, "ld", check_long); - numbers_list_fix_width(long, "%ld", delim, 11, "li", check_long); - numbers_list_fix_width(unsigned long, "%lx", delim, 8, "lx", check_ulong); - numbers_list_fix_width(unsigned long, "0x%lx", delim, 10, "lx", check_ulong); - numbers_list_fix_width(long, "0x%lx", delim, 10, "li", check_long); + numbers_list_fix_width(test, unsigned long, "%lu", delim, 10, "lu", check_ulong); + numbers_list_fix_width(test, long, "%ld", delim, 11, "ld", check_long); + numbers_list_fix_width(test, long, "%ld", delim, 11, "li", check_long); + numbers_list_fix_width(test, unsigned long, "%lx", delim, 8, "lx", check_ulong); + numbers_list_fix_width(test, unsigned long, "0x%lx", delim, 10, "lx", check_ulong); + numbers_list_fix_width(test, long, "0x%lx", delim, 10, "li", check_long); #endif } -static void __init numbers_list_field_width_d(const char *delim) +static void numbers_list_field_width_d(struct kunit *test, const char *delim) { - numbers_list_fix_width(unsigned int, "%u", delim, 10, "u", check_uint); - numbers_list_fix_width(int, "%d", delim, 11, "d", check_int); - numbers_list_fix_width(int, "%d", delim, 11, "i", check_int); - numbers_list_fix_width(unsigned int, "%x", delim, 8, "x", check_uint); - numbers_list_fix_width(unsigned int, "0x%x", delim, 10, "x", check_uint); - numbers_list_fix_width(int, "0x%x", delim, 10, "i", check_int); + numbers_list_fix_width(test, unsigned int, "%u", delim, 10, "u", check_uint); + numbers_list_fix_width(test, int, "%d", delim, 11, "d", check_int); + numbers_list_fix_width(test, int, "%d", delim, 11, "i", check_int); + numbers_list_fix_width(test, unsigned int, "%x", delim, 8, "x", check_uint); + numbers_list_fix_width(test, unsigned int, "0x%x", delim, 10, "x", check_uint); + numbers_list_fix_width(test, int, "0x%x", delim, 10, "i", check_int); } -static void __init numbers_list_field_width_h(const char *delim) +static void numbers_list_field_width_h(struct kunit *test, const char *delim) { - numbers_list_fix_width(unsigned short, "%hu", delim, 5, "hu", check_ushort); - numbers_list_fix_width(short, "%hd", delim, 6, "hd", check_short); - numbers_list_fix_width(short, "%hd", delim, 6, "hi", check_short); - numbers_list_fix_width(unsigned short, "%hx", delim, 4, "hx", check_ushort); - numbers_list_fix_width(unsigned short, "0x%hx", delim, 6, "hx", check_ushort); - numbers_list_fix_width(short, "0x%hx", delim, 6, "hi", check_short); + numbers_list_fix_width(test, unsigned short, "%hu", delim, 5, "hu", check_ushort); + numbers_list_fix_width(test, short, "%hd", delim, 6, "hd", check_short); + numbers_list_fix_width(test, short, "%hd", delim, 6, "hi", check_short); + numbers_list_fix_width(test, unsigned short, "%hx", delim, 4, "hx", check_ushort); + numbers_list_fix_width(test, unsigned short, "0x%hx", delim, 6, "hx", check_ushort); + numbers_list_fix_width(test, short, "0x%hx", delim, 6, "hi", check_short); } -static void __init numbers_list_field_width_hh(const char *delim) +static void numbers_list_field_width_hh(struct kunit *test, const char *delim) { - numbers_list_fix_width(unsigned char, "%hhu", delim, 3, "hhu", check_uchar); - numbers_list_fix_width(signed char, "%hhd", delim, 4, "hhd", check_char); - numbers_list_fix_width(signed char, "%hhd", delim, 4, "hhi", check_char); - numbers_list_fix_width(unsigned char, "%hhx", delim, 2, "hhx", check_uchar); - numbers_list_fix_width(unsigned char, "0x%hhx", delim, 4, "hhx", check_uchar); - numbers_list_fix_width(signed char, "0x%hhx", delim, 4, "hhi", check_char); + numbers_list_fix_width(test, unsigned char, "%hhu", delim, 3, "hhu", check_uchar); + numbers_list_fix_width(test, signed char, "%hhd", delim, 4, "hhd", check_char); + numbers_list_fix_width(test, signed char, "%hhd", delim, 4, "hhi", check_char); + numbers_list_fix_width(test, unsigned char, "%hhx", delim, 2, "hhx", check_uchar); + numbers_list_fix_width(test, unsigned char, "0x%hhx", delim, 4, "hhx", check_uchar); + numbers_list_fix_width(test, signed char, "0x%hhx", delim, 4, "hhi", check_char); } /* * List of numbers separated by delim. Each field width specifier is the * maximum possible digits for the given type and base. */ -static void __init numbers_list_field_width_typemax(const char *delim) +static void numbers_list_field_width_typemax(struct kunit *test, const char *delim) { - numbers_list_field_width_ll(delim); - numbers_list_field_width_l(delim); - numbers_list_field_width_d(delim); - numbers_list_field_width_h(delim); - numbers_list_field_width_hh(delim); + numbers_list_field_width_ll(test, delim); + numbers_list_field_width_l(test, delim); + numbers_list_field_width_d(test, delim); + numbers_list_field_width_h(test, delim); + numbers_list_field_width_hh(test, delim); } -static void __init numbers_list_field_width_val_ll(const char *delim) +static void numbers_list_field_width_val_ll(struct kunit *test, const char *delim) { - numbers_list_val_width(unsigned long long, "%llu", delim, "llu", check_ull); - numbers_list_val_width(long long, "%lld", delim, "lld", check_ll); - numbers_list_val_width(long long, "%lld", delim, "lli", check_ll); - numbers_list_val_width(unsigned long long, "%llx", delim, "llx", check_ull); - numbers_list_val_width(unsigned long long, "0x%llx", delim, "llx", check_ull); - numbers_list_val_width(long long, "0x%llx", delim, "lli", check_ll); + numbers_list_val_width(test, unsigned long long, "%llu", delim, "llu", check_ull); + numbers_list_val_width(test, long long, "%lld", delim, "lld", check_ll); + numbers_list_val_width(test, long long, "%lld", delim, "lli", check_ll); + numbers_list_val_width(test, unsigned long long, "%llx", delim, "llx", check_ull); + numbers_list_val_width(test, unsigned long long, "0x%llx", delim, "llx", check_ull); + numbers_list_val_width(test, long long, "0x%llx", delim, "lli", check_ll); } -static void __init numbers_list_field_width_val_l(const char *delim) +static void numbers_list_field_width_val_l(struct kunit *test, const char *delim) { - numbers_list_val_width(unsigned long, "%lu", delim, "lu", check_ulong); - numbers_list_val_width(long, "%ld", delim, "ld", check_long); - numbers_list_val_width(long, "%ld", delim, "li", check_long); - numbers_list_val_width(unsigned long, "%lx", delim, "lx", check_ulong); - numbers_list_val_width(unsigned long, "0x%lx", delim, "lx", check_ulong); - numbers_list_val_width(long, "0x%lx", delim, "li", check_long); + numbers_list_val_width(test, unsigned long, "%lu", delim, "lu", check_ulong); + numbers_list_val_width(test, long, "%ld", delim, "ld", check_long); + numbers_list_val_width(test, long, "%ld", delim, "li", check_long); + numbers_list_val_width(test, unsigned long, "%lx", delim, "lx", check_ulong); + numbers_list_val_width(test, unsigned long, "0x%lx", delim, "lx", check_ulong); + numbers_list_val_width(test, long, "0x%lx", delim, "li", check_long); } -static void __init numbers_list_field_width_val_d(const char *delim) +static void numbers_list_field_width_val_d(struct kunit *test, const char *delim) { - numbers_list_val_width(unsigned int, "%u", delim, "u", check_uint); - numbers_list_val_width(int, "%d", delim, "d", check_int); - numbers_list_val_width(int, "%d", delim, "i", check_int); - numbers_list_val_width(unsigned int, "%x", delim, "x", check_uint); - numbers_list_val_width(unsigned int, "0x%x", delim, "x", check_uint); - numbers_list_val_width(int, "0x%x", delim, "i", check_int); + numbers_list_val_width(test, unsigned int, "%u", delim, "u", check_uint); + numbers_list_val_width(test, int, "%d", delim, "d", check_int); + numbers_list_val_width(test, int, "%d", delim, "i", check_int); + numbers_list_val_width(test, unsigned int, "%x", delim, "x", check_uint); + numbers_list_val_width(test, unsigned int, "0x%x", delim, "x", check_uint); + numbers_list_val_width(test, int, "0x%x", delim, "i", check_int); } -static void __init numbers_list_field_width_val_h(const char *delim) +static void numbers_list_field_width_val_h(struct kunit *test, const char *delim) { - numbers_list_val_width(unsigned short, "%hu", delim, "hu", check_ushort); - numbers_list_val_width(short, "%hd", delim, "hd", check_short); - numbers_list_val_width(short, "%hd", delim, "hi", check_short); - numbers_list_val_width(unsigned short, "%hx", delim, "hx", check_ushort); - numbers_list_val_width(unsigned short, "0x%hx", delim, "hx", check_ushort); - numbers_list_val_width(short, "0x%hx", delim, "hi", check_short); + numbers_list_val_width(test, unsigned short, "%hu", delim, "hu", check_ushort); + numbers_list_val_width(test, short, "%hd", delim, "hd", check_short); + numbers_list_val_width(test, short, "%hd", delim, "hi", check_short); + numbers_list_val_width(test, unsigned short, "%hx", delim, "hx", check_ushort); + numbers_list_val_width(test, unsigned short, "0x%hx", delim, "hx", check_ushort); + numbers_list_val_width(test, short, "0x%hx", delim, "hi", check_short); } -static void __init numbers_list_field_width_val_hh(const char *delim) +static void numbers_list_field_width_val_hh(struct kunit *test, const char *delim) { - numbers_list_val_width(unsigned char, "%hhu", delim, "hhu", check_uchar); - numbers_list_val_width(signed char, "%hhd", delim, "hhd", check_char); - numbers_list_val_width(signed char, "%hhd", delim, "hhi", check_char); - numbers_list_val_width(unsigned char, "%hhx", delim, "hhx", check_uchar); - numbers_list_val_width(unsigned char, "0x%hhx", delim, "hhx", check_uchar); - numbers_list_val_width(signed char, "0x%hhx", delim, "hhi", check_char); + numbers_list_val_width(test, unsigned char, "%hhu", delim, "hhu", check_uchar); + numbers_list_val_width(test, signed char, "%hhd", delim, "hhd", check_char); + numbers_list_val_width(test, signed char, "%hhd", delim, "hhi", check_char); + numbers_list_val_width(test, unsigned char, "%hhx", delim, "hhx", check_uchar); + numbers_list_val_width(test, unsigned char, "0x%hhx", delim, "hhx", check_uchar); + numbers_list_val_width(test, signed char, "0x%hhx", delim, "hhi", check_char); } /* * List of numbers separated by delim. Each field width specifier is the * exact length of the corresponding value digits in the string being scanned. */ -static void __init numbers_list_field_width_val_width(const char *delim) +static void numbers_list_field_width_val_width(struct kunit *test, const char *delim) { - numbers_list_field_width_val_ll(delim); - numbers_list_field_width_val_l(delim); - numbers_list_field_width_val_d(delim); - numbers_list_field_width_val_h(delim); - numbers_list_field_width_val_hh(delim); + numbers_list_field_width_val_ll(test, delim); + numbers_list_field_width_val_l(test, delim); + numbers_list_field_width_val_d(test, delim); + numbers_list_field_width_val_h(test, delim); + numbers_list_field_width_val_hh(test, delim); } /* @@ -598,67 +573,67 @@ static void __init numbers_list_field_width_val_width(const char *delim) * of digits. For example the hex values c0,3,bf01,303 would have a * string representation of "c03bf01303" and extracted with "%2x%1x%4x%3x". */ -static void __init numbers_slice(void) +static void numbers_slice(struct kunit *test) { - numbers_list_field_width_val_width(""); + numbers_list_field_width_val_width(test, ""); } -#define test_number_prefix(T, str, scan_fmt, expect0, expect1, n_args, fn) \ +#define test_number_prefix(test, T, str, scan_fmt, expect0, expect1, n_args, fn)\ do { \ const T expect[2] = { expect0, expect1 }; \ T result[2] = { (T)~expect[0], (T)~expect[1] }; \ \ - _test(fn, &expect, str, scan_fmt, n_args, &result[0], &result[1]); \ + _test(test, fn, &expect, str, scan_fmt, n_args, &result[0], &result[1]);\ } while (0) /* * Number prefix is >= field width. * Expected behaviour is derived from testing userland sscanf. */ -static void __init numbers_prefix_overflow(void) +static void numbers_prefix_overflow(struct kunit *test) { /* * Negative decimal with a field of width 1, should quit scanning * and return 0. */ - test_number_prefix(long long, "-1 1", "%1lld %lld", 0, 0, 0, check_ll); - test_number_prefix(long, "-1 1", "%1ld %ld", 0, 0, 0, check_long); - test_number_prefix(int, "-1 1", "%1d %d", 0, 0, 0, check_int); - test_number_prefix(short, "-1 1", "%1hd %hd", 0, 0, 0, check_short); - test_number_prefix(signed char, "-1 1", "%1hhd %hhd", 0, 0, 0, check_char); - - test_number_prefix(long long, "-1 1", "%1lli %lli", 0, 0, 0, check_ll); - test_number_prefix(long, "-1 1", "%1li %li", 0, 0, 0, check_long); - test_number_prefix(int, "-1 1", "%1i %i", 0, 0, 0, check_int); - test_number_prefix(short, "-1 1", "%1hi %hi", 0, 0, 0, check_short); - test_number_prefix(signed char, "-1 1", "%1hhi %hhi", 0, 0, 0, check_char); + test_number_prefix(test, long long, "-1 1", "%1lld %lld", 0, 0, 0, check_ll); + test_number_prefix(test, long, "-1 1", "%1ld %ld", 0, 0, 0, check_long); + test_number_prefix(test, int, "-1 1", "%1d %d", 0, 0, 0, check_int); + test_number_prefix(test, short, "-1 1", "%1hd %hd", 0, 0, 0, check_short); + test_number_prefix(test, signed char, "-1 1", "%1hhd %hhd", 0, 0, 0, check_char); + + test_number_prefix(test, long long, "-1 1", "%1lli %lli", 0, 0, 0, check_ll); + test_number_prefix(test, long, "-1 1", "%1li %li", 0, 0, 0, check_long); + test_number_prefix(test, int, "-1 1", "%1i %i", 0, 0, 0, check_int); + test_number_prefix(test, short, "-1 1", "%1hi %hi", 0, 0, 0, check_short); + test_number_prefix(test, signed char, "-1 1", "%1hhi %hhi", 0, 0, 0, check_char); /* * 0x prefix in a field of width 1: 0 is a valid digit so should * convert. Next field scan starts at the 'x' which isn't a digit so * scan quits with one field converted. */ - test_number_prefix(unsigned long long, "0xA7", "%1llx%llx", 0, 0, 1, check_ull); - test_number_prefix(unsigned long, "0xA7", "%1lx%lx", 0, 0, 1, check_ulong); - test_number_prefix(unsigned int, "0xA7", "%1x%x", 0, 0, 1, check_uint); - test_number_prefix(unsigned short, "0xA7", "%1hx%hx", 0, 0, 1, check_ushort); - test_number_prefix(unsigned char, "0xA7", "%1hhx%hhx", 0, 0, 1, check_uchar); - test_number_prefix(long long, "0xA7", "%1lli%llx", 0, 0, 1, check_ll); - test_number_prefix(long, "0xA7", "%1li%lx", 0, 0, 1, check_long); - test_number_prefix(int, "0xA7", "%1i%x", 0, 0, 1, check_int); - test_number_prefix(short, "0xA7", "%1hi%hx", 0, 0, 1, check_short); - test_number_prefix(char, "0xA7", "%1hhi%hhx", 0, 0, 1, check_char); + test_number_prefix(test, unsigned long long, "0xA7", "%1llx%llx", 0, 0, 1, check_ull); + test_number_prefix(test, unsigned long, "0xA7", "%1lx%lx", 0, 0, 1, check_ulong); + test_number_prefix(test, unsigned int, "0xA7", "%1x%x", 0, 0, 1, check_uint); + test_number_prefix(test, unsigned short, "0xA7", "%1hx%hx", 0, 0, 1, check_ushort); + test_number_prefix(test, unsigned char, "0xA7", "%1hhx%hhx", 0, 0, 1, check_uchar); + test_number_prefix(test, long long, "0xA7", "%1lli%llx", 0, 0, 1, check_ll); + test_number_prefix(test, long, "0xA7", "%1li%lx", 0, 0, 1, check_long); + test_number_prefix(test, int, "0xA7", "%1i%x", 0, 0, 1, check_int); + test_number_prefix(test, short, "0xA7", "%1hi%hx", 0, 0, 1, check_short); + test_number_prefix(test, char, "0xA7", "%1hhi%hhx", 0, 0, 1, check_char); /* * 0x prefix in a field of width 2 using %x conversion: first field * converts to 0. Next field scan starts at the character after "0x". * Both fields will convert. */ - test_number_prefix(unsigned long long, "0xA7", "%2llx%llx", 0, 0xa7, 2, check_ull); - test_number_prefix(unsigned long, "0xA7", "%2lx%lx", 0, 0xa7, 2, check_ulong); - test_number_prefix(unsigned int, "0xA7", "%2x%x", 0, 0xa7, 2, check_uint); - test_number_prefix(unsigned short, "0xA7", "%2hx%hx", 0, 0xa7, 2, check_ushort); - test_number_prefix(unsigned char, "0xA7", "%2hhx%hhx", 0, 0xa7, 2, check_uchar); + test_number_prefix(test, unsigned long long, "0xA7", "%2llx%llx", 0, 0xa7, 2, check_ull); + test_number_prefix(test, unsigned long, "0xA7", "%2lx%lx", 0, 0xa7, 2, check_ulong); + test_number_prefix(test, unsigned int, "0xA7", "%2x%x", 0, 0xa7, 2, check_uint); + test_number_prefix(test, unsigned short, "0xA7", "%2hx%hx", 0, 0xa7, 2, check_ushort); + test_number_prefix(test, unsigned char, "0xA7", "%2hhx%hhx", 0, 0xa7, 2, check_uchar); /* * 0x prefix in a field of width 2 using %i conversion: first field @@ -666,124 +641,112 @@ static void __init numbers_prefix_overflow(void) * which will convert if can be interpreted as decimal but will fail * if it contains any hex digits (since no 0x prefix). */ - test_number_prefix(long long, "0x67", "%2lli%lli", 0, 67, 2, check_ll); - test_number_prefix(long, "0x67", "%2li%li", 0, 67, 2, check_long); - test_number_prefix(int, "0x67", "%2i%i", 0, 67, 2, check_int); - test_number_prefix(short, "0x67", "%2hi%hi", 0, 67, 2, check_short); - test_number_prefix(char, "0x67", "%2hhi%hhi", 0, 67, 2, check_char); - - test_number_prefix(long long, "0xA7", "%2lli%lli", 0, 0, 1, check_ll); - test_number_prefix(long, "0xA7", "%2li%li", 0, 0, 1, check_long); - test_number_prefix(int, "0xA7", "%2i%i", 0, 0, 1, check_int); - test_number_prefix(short, "0xA7", "%2hi%hi", 0, 0, 1, check_short); - test_number_prefix(char, "0xA7", "%2hhi%hhi", 0, 0, 1, check_char); -} - -#define _test_simple_strtoxx(T, fn, gen_fmt, expect, base) \ -do { \ - T got; \ - char *endp; \ - int len; \ - bool fail = false; \ - \ - total_tests++; \ - len = snprintf(test_buffer, BUF_SIZE, gen_fmt, expect); \ - got = (fn)(test_buffer, &endp, base); \ - pr_debug(#fn "(\"%s\", %d) -> " gen_fmt "\n", test_buffer, base, got); \ - if (got != (expect)) { \ - fail = true; \ - pr_warn(#fn "(\"%s\", %d): got " gen_fmt " expected " gen_fmt "\n", \ - test_buffer, base, got, expect); \ - } else if (endp != test_buffer + len) { \ - fail = true; \ - pr_warn(#fn "(\"%s\", %d) startp=0x%px got endp=0x%px expected 0x%px\n", \ - test_buffer, base, test_buffer, \ - test_buffer + len, endp); \ - } \ - \ - if (fail) \ - failed_tests++; \ + test_number_prefix(test, long long, "0x67", "%2lli%lli", 0, 67, 2, check_ll); + test_number_prefix(test, long, "0x67", "%2li%li", 0, 67, 2, check_long); + test_number_prefix(test, int, "0x67", "%2i%i", 0, 67, 2, check_int); + test_number_prefix(test, short, "0x67", "%2hi%hi", 0, 67, 2, check_short); + test_number_prefix(test, char, "0x67", "%2hhi%hhi", 0, 67, 2, check_char); + + test_number_prefix(test, long long, "0xA7", "%2lli%lli", 0, 0, 1, check_ll); + test_number_prefix(test, long, "0xA7", "%2li%li", 0, 0, 1, check_long); + test_number_prefix(test, int, "0xA7", "%2i%i", 0, 0, 1, check_int); + test_number_prefix(test, short, "0xA7", "%2hi%hi", 0, 0, 1, check_short); + test_number_prefix(test, char, "0xA7", "%2hhi%hhi", 0, 0, 1, check_char); +} + +#define _test_simple_strtoxx(test, T, fn, gen_fmt, expect, base) \ +do { \ + T got; \ + char *endp; \ + int len; \ + \ + len = snprintf(test_buffer, BUF_SIZE, gen_fmt, expect); \ + got = (fn)(test_buffer, &endp, base); \ + pr_debug(#fn "(\"%s\", %d) -> " gen_fmt "\n", test_buffer, base, got); \ + KUNIT_EXPECT_EQ_MSG(test, got, expect, #fn "(\"%s\", %d)", test_buffer, base); \ + KUNIT_EXPECT_PTR_EQ_MSG(test, endp, test_buffer + len, \ + #fn "(\"%s\", %d)", test_buffer, base); \ } while (0) -#define test_simple_strtoxx(T, fn, gen_fmt, base) \ +#define test_simple_strtoxx(test, T, fn, gen_fmt, base) \ do { \ int i; \ \ for (i = 0; i < ARRAY_SIZE(numbers); i++) { \ - _test_simple_strtoxx(T, fn, gen_fmt, (T)numbers[i], base); \ + _test_simple_strtoxx(test, T, fn, gen_fmt, (T)numbers[i], base);\ \ if (is_signed_type(T)) \ - _test_simple_strtoxx(T, fn, gen_fmt, \ + _test_simple_strtoxx(test, T, fn, gen_fmt, \ -(T)numbers[i], base); \ } \ } while (0) -static void __init test_simple_strtoull(void) +static void test_simple_strtoull(struct kunit *test) { - test_simple_strtoxx(unsigned long long, simple_strtoull, "%llu", 10); - test_simple_strtoxx(unsigned long long, simple_strtoull, "%llu", 0); - test_simple_strtoxx(unsigned long long, simple_strtoull, "%llx", 16); - test_simple_strtoxx(unsigned long long, simple_strtoull, "0x%llx", 16); - test_simple_strtoxx(unsigned long long, simple_strtoull, "0x%llx", 0); + test_simple_strtoxx(test, unsigned long long, simple_strtoull, "%llu", 10); + test_simple_strtoxx(test, unsigned long long, simple_strtoull, "%llu", 0); + test_simple_strtoxx(test, unsigned long long, simple_strtoull, "%llx", 16); + test_simple_strtoxx(test, unsigned long long, simple_strtoull, "0x%llx", 16); + test_simple_strtoxx(test, unsigned long long, simple_strtoull, "0x%llx", 0); } -static void __init test_simple_strtoll(void) +static void test_simple_strtoll(struct kunit *test) { - test_simple_strtoxx(long long, simple_strtoll, "%lld", 10); - test_simple_strtoxx(long long, simple_strtoll, "%lld", 0); - test_simple_strtoxx(long long, simple_strtoll, "%llx", 16); - test_simple_strtoxx(long long, simple_strtoll, "0x%llx", 16); - test_simple_strtoxx(long long, simple_strtoll, "0x%llx", 0); + test_simple_strtoxx(test, long long, simple_strtoll, "%lld", 10); + test_simple_strtoxx(test, long long, simple_strtoll, "%lld", 0); + test_simple_strtoxx(test, long long, simple_strtoll, "%llx", 16); + test_simple_strtoxx(test, long long, simple_strtoll, "0x%llx", 16); + test_simple_strtoxx(test, long long, simple_strtoll, "0x%llx", 0); } -static void __init test_simple_strtoul(void) +static void test_simple_strtoul(struct kunit *test) { - test_simple_strtoxx(unsigned long, simple_strtoul, "%lu", 10); - test_simple_strtoxx(unsigned long, simple_strtoul, "%lu", 0); - test_simple_strtoxx(unsigned long, simple_strtoul, "%lx", 16); - test_simple_strtoxx(unsigned long, simple_strtoul, "0x%lx", 16); - test_simple_strtoxx(unsigned long, simple_strtoul, "0x%lx", 0); + test_simple_strtoxx(test, unsigned long, simple_strtoul, "%lu", 10); + test_simple_strtoxx(test, unsigned long, simple_strtoul, "%lu", 0); + test_simple_strtoxx(test, unsigned long, simple_strtoul, "%lx", 16); + test_simple_strtoxx(test, unsigned long, simple_strtoul, "0x%lx", 16); + test_simple_strtoxx(test, unsigned long, simple_strtoul, "0x%lx", 0); } -static void __init test_simple_strtol(void) +static void test_simple_strtol(struct kunit *test) { - test_simple_strtoxx(long, simple_strtol, "%ld", 10); - test_simple_strtoxx(long, simple_strtol, "%ld", 0); - test_simple_strtoxx(long, simple_strtol, "%lx", 16); - test_simple_strtoxx(long, simple_strtol, "0x%lx", 16); - test_simple_strtoxx(long, simple_strtol, "0x%lx", 0); + test_simple_strtoxx(test, long, simple_strtol, "%ld", 10); + test_simple_strtoxx(test, long, simple_strtol, "%ld", 0); + test_simple_strtoxx(test, long, simple_strtol, "%lx", 16); + test_simple_strtoxx(test, long, simple_strtol, "0x%lx", 16); + test_simple_strtoxx(test, long, simple_strtol, "0x%lx", 0); } /* Selection of common delimiters/separators between numbers in a string. */ -static const char * const number_delimiters[] __initconst = { +static const char * const number_delimiters[] = { " ", ":", ",", "-", "/", }; -static void __init test_numbers(void) +static void test_numbers(struct kunit *test) { int i; /* String containing only one number. */ - numbers_simple(); + numbers_simple(test); /* String with multiple numbers separated by delimiter. */ for (i = 0; i < ARRAY_SIZE(number_delimiters); i++) { - numbers_list(number_delimiters[i]); + numbers_list(test, number_delimiters[i]); /* Field width may be longer than actual field digits. */ - numbers_list_field_width_typemax(number_delimiters[i]); + numbers_list_field_width_typemax(test, number_delimiters[i]); /* Each field width exactly length of actual field digits. */ - numbers_list_field_width_val_width(number_delimiters[i]); + numbers_list_field_width_val_width(test, number_delimiters[i]); } /* Slice continuous sequence of digits using field widths. */ - numbers_slice(); + numbers_slice(test); - numbers_prefix_overflow(); + numbers_prefix_overflow(test); } -static void __init selftest(void) +static void scanf_test(struct kunit *test) { test_buffer = kmalloc(BUF_SIZE, GFP_KERNEL); if (!test_buffer) @@ -797,18 +760,29 @@ static void __init selftest(void) prandom_seed_state(&rnd_state, 3141592653589793238ULL); - test_numbers(); + test_numbers(test); - test_simple_strtoull(); - test_simple_strtoll(); - test_simple_strtoul(); - test_simple_strtol(); + test_simple_strtoull(test); + test_simple_strtoll(test); + test_simple_strtoul(test); + test_simple_strtol(test); kfree(fmt_buffer); kfree(test_buffer); } -KSTM_MODULE_LOADERS(test_scanf); +static struct kunit_case scanf_test_cases[] = { + KUNIT_CASE(scanf_test), + {} +}; + +static struct kunit_suite scanf_test_suite = { + .name = "scanf", + .test_cases = scanf_test_cases, +}; + +kunit_test_suite(scanf_test_suite); + MODULE_AUTHOR("Richard Fitzgerald <rf(a)opensource.cirrus.com>"); MODULE_DESCRIPTION("Test cases for sscanf facility"); MODULE_LICENSE("GPL v2"); diff --git a/tools/testing/selftests/lib/Makefile b/tools/testing/selftests/lib/Makefile index c52fe3ad8e98..4afda556151f 100644 --- a/tools/testing/selftests/lib/Makefile +++ b/tools/testing/selftests/lib/Makefile @@ -4,5 +4,5 @@ # No binaries, but make sure arg-less "make" doesn't trigger "run_tests" all: -TEST_PROGS := printf.sh bitmap.sh prime_numbers.sh scanf.sh +TEST_PROGS := printf.sh bitmap.sh prime_numbers.sh include ../lib.mk diff --git a/tools/testing/selftests/lib/config b/tools/testing/selftests/lib/config index dc15aba8d0a3..80b55a504868 100644 --- a/tools/testing/selftests/lib/config +++ b/tools/testing/selftests/lib/config @@ -1,5 +1,4 @@ CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_PRIME_NUMBERS=m CONFIG_TEST_BITOPS=m diff --git a/tools/testing/selftests/lib/scanf.sh b/tools/testing/selftests/lib/scanf.sh deleted file mode 100755 index b59b8ba561c3..000000000000 --- a/tools/testing/selftests/lib/scanf.sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0 -# Tests the scanf infrastructure using test_scanf kernel module. -$(dirname $0)/../kselftest/module.sh "scanf" test_scanf --- base-commit: 18fe18c99c8d90d77c7ed6b42f48fa5b4e5c99c3 change-id: 20250131-scanf-kunit-convert-f70dc33bb34c Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 3 weeks

2
5
0 0

[PATCH net-next v3 0/2] netdevgenl: Add an xsk attribute to queues

by Joe Damato

Greetings: Welcome to v3. No functional changes, see changelog below. This is an attempt to followup on something Jakub asked me about [1], adding an xsk attribute to queues and more clearly documenting which queues are linked to NAPIs... After the RFC [2], Jakub suggested creating an empty nest for queues which have a pool, so I've adjusted this version to work that way. The nest can be extended in the future to express attributes about XSK as needed. Queues which are not used for AF_XDP do not have the xsk attribute present. I've run the included test on: - my mlx5 machine (via NETIF=) - without setting NETIF And the test seems to pass in both cases. Thanks, Joe [1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/ [2]: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ v3: - Change comment format in patch 2 to avoid kdoc warnings. No other changes. v2: https://lore.kernel.org/all/20250203185828.19334-1-jdamato@fastly.com/ - Switched from RFC to actual submission now that net-next is open - Adjusted patch 1 to include an empty nest as suggested by Jakub - Adjusted patch 2 to update the test based on changes to patch 1, and to incorporate some Python feedback from Jakub :) rfc: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ Joe Damato (2): netdev-genl: Add an XSK attribute to queues selftests: drv-net: Test queue xsk attribute Documentation/netlink/specs/netdev.yaml | 13 ++- include/uapi/linux/netdev.h | 6 ++ net/core/netdev-genl.c | 11 +++ tools/include/uapi/linux/netdev.h | 6 ++ .../testing/selftests/drivers/net/.gitignore | 2 + tools/testing/selftests/drivers/net/Makefile | 3 + tools/testing/selftests/drivers/net/queues.py | 35 +++++++- .../selftests/drivers/net/xdp_helper.c | 89 +++++++++++++++++++ 8 files changed, 162 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/.gitignore create mode 100644 tools/testing/selftests/drivers/net/xdp_helper.c base-commit: c2933b2befe25309f4c5cfbea0ca80909735fd76 -- 2.43.0

2 months, 3 weeks

1
1
0 0

Previous Message

by Allen Cheng

Good day, I sent you a message a few hours ago but no reply yet, or you didn't receive it? Kindly read my letter and reply back. I want to make an inquiry Thanks. Dr.Allen Cheng Human Resource Manager | Product Research Assistant FC Industrial Laboratories Ltd

2 months, 3 weeks

1
0
0 0

[PATCH] selftests: net: fix grammar in reuseaddr_ports_exhausted.c log message

by Pranav Tyagi

This patch fixes a grammatical error in a test log message in reuseaddr_ports_exhausted.c for better clarity as a part of lfx application tasks Signed-off-by: Pranav Tyagi <pranav.tyagi03(a)gmail.com> --- tools/testing/selftests/net/reuseaddr_ports_exhausted.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/reuseaddr_ports_exhausted.c b/tools/testing/selftests/net/reuseaddr_ports_exhausted.c index 066efd30e294..7b9bf8a7bbe1 100644 --- a/tools/testing/selftests/net/reuseaddr_ports_exhausted.c +++ b/tools/testing/selftests/net/reuseaddr_ports_exhausted.c @@ -112,7 +112,7 @@ TEST(reuseaddr_ports_exhausted_reusable_same_euid) ASSERT_NE(-1, fd[0]) TH_LOG("failed to bind."); if (opts->reuseport[0] && opts->reuseport[1]) { - EXPECT_EQ(-1, fd[1]) TH_LOG("should fail to bind because both sockets succeed to be listened."); + EXPECT_EQ(-1, fd[1]) TH_LOG("should fail to bind because both sockets successfully listened."); } else { EXPECT_NE(-1, fd[1]) TH_LOG("should succeed to bind to connect to different destinations."); } -- 2.47.1

2 months, 3 weeks

1
0
0 0

[PATCH] KVM: selftests: Fix spelling mistake "initally" -> "initially"

by Colin Ian King

There is a spelling mistake in a literal string and in the function test_get_inital_dirty. Fix them. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/kvm/s390/cmma_test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/s390/cmma_test.c b/tools/testing/selftests/kvm/s390/cmma_test.c index e32dd59703a0..85cc8c18d6e7 100644 --- a/tools/testing/selftests/kvm/s390/cmma_test.c +++ b/tools/testing/selftests/kvm/s390/cmma_test.c @@ -444,7 +444,7 @@ static void assert_no_pages_cmma_dirty(struct kvm_vm *vm) ); } -static void test_get_inital_dirty(void) +static void test_get_initial_dirty(void) { struct kvm_vm *vm = create_vm_two_memslots(); struct kvm_vcpu *vcpu; @@ -651,7 +651,7 @@ struct testdef { } testlist[] = { { "migration mode and dirty tracking", test_migration_mode }, { "GET_CMMA_BITS: basic calls", test_get_cmma_basic }, - { "GET_CMMA_BITS: all pages are dirty initally", test_get_inital_dirty }, + { "GET_CMMA_BITS: all pages are dirty initially", test_get_initial_dirty }, { "GET_CMMA_BITS: holes are skipped", test_get_skip_holes }, }; -- 2.47.2

2 months, 3 weeks

3
2
0 0

[PATCH bpf-next v7 0/5] xsk: TX metadata Launch Time support

by Song Yoong Siang

This series expands the XDP TX metadata framework to allow user applications to pass per packet 64-bit launch time directly to the kernel driver, requesting launch time hardware offload support. The XDP TX metadata framework will not perform any clock conversion or packet reordering. Please note that the role of Tx metadata is just to pass the launch time, not to enable the offload feature. Users will need to enable the launch time hardware offload feature of the device by using the respective command, such as the tc-etf command. Although some devices use the tc-etf command to enable their launch time hardware offload feature, xsk packets will not go through the etf qdisc. Therefore, in my opinion, the launch time should always be based on the PTP Hardware Clock (PHC). Thus, i did not include a clock ID to indicate the clock source. To simplify the test steps, I modified the xdp_hw_metadata bpf self-test tool in such a way that it will set the launch time based on the offset provided by the user and the value of the Receive Hardware Timestamp, which is against the PHC. This will eliminate the need to discipline System Clock with the PHC and then use clock_gettime() to get the time. Please note that AF_XDP lacks a feedback mechanism to inform the application if the requested launch time is invalid. So, users are expected to familiar with the horizon of the launch time of the device they use and not request a launch time that is beyond the horizon. Otherwise, the driver might interpret the launch time incorrectly and react wrongly. For stmmac and igc, where modulo computation is used, a launch time larger than the horizon will cause the device to transmit the packet earlier that the requested launch time. Although there is no feedback mechanism for the launch time request for now, user still can check whether the requested launch time is working or not, by requesting the Transmit Completion Hardware Timestamp. V7: - split the refactoring code of igc empty packet insertion into a separate commit (Faizal) - add explanation on why the value "4" is used as igc transmit budget (Faizal) - perform a stress test by sending 1000 packets with 10ms interval and launch time set to 500us in the future (Faizal & Yong Liang) V6: https://lore.kernel.org/netdev/20250116155350.555374-1-yoong.siang.song@int… - fix selftest build errors by using asprintf() and realloc(), instead of managing the buffer sizes manually (Daniel, Stanislav) V5: https://lore.kernel.org/netdev/20250114152718.120588-1-yoong.siang.song@int… - change netdev feature name from tx-launch-time to tx-launch-time-fifo to explicitly state the FIFO behaviour (Stanislav) - improve the looping of xdp_hw_metadata app to wait for packet tx completion to be more readable by using clock_gettime() (Stanislav) - add launch time setup steps into xdp_hw_metadata app (Stanislav) V4: https://lore.kernel.org/netdev/20250106135506.9687-1-yoong.siang.song@intel… - added XDP launch time support to the igc driver (Jesper & Florian) - added per-driver launch time limitation on xsk-tx-metadata.rst (Jesper) - added explanation on FIFO behavior on xsk-tx-metadata.rst (Jakub) - added step to enable launch time in the commit message (Jesper & Willem) - explicitly documented the type of launch_time and which clock source it is against (Willem) V3: https://lore.kernel.org/netdev/20231203165129.1740512-1-yoong.siang.song@in… - renamed to use launch time (Jesper & Willem) - changed the default launch time in xdp_hw_metadata apps from 1s to 0.1s because some NICs do not support such a large future time. V2: https://lore.kernel.org/netdev/20231201062421.1074768-1-yoong.siang.song@in… - renamed to use Earliest TxTime First (Willem) - renamed to use txtime (Willem) V1: https://lore.kernel.org/netdev/20231130162028.852006-1-yoong.siang.song@int… Song Yoong Siang (5): xsk: Add launch time hardware offload support to XDP Tx metadata selftests/bpf: Add launch time request to xdp_hw_metadata net: stmmac: Add launch time support to XDP ZC igc: Refactor empty packet insertion into a reusable function igc: Add launch time support to XDP ZC Documentation/netlink/specs/netdev.yaml | 4 + Documentation/networking/xsk-tx-metadata.rst | 62 +++++++ drivers/net/ethernet/intel/igc/igc_main.c | 84 ++++++--- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 + .../net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++ include/net/xdp_sock.h | 10 ++ include/net/xdp_sock_drv.h | 1 + include/uapi/linux/if_xdp.h | 10 ++ include/uapi/linux/netdev.h | 3 + net/core/netdev-genl.c | 2 + net/xdp/xsk.c | 3 + tools/include/uapi/linux/if_xdp.h | 10 ++ tools/include/uapi/linux/netdev.h | 3 + tools/testing/selftests/bpf/xdp_hw_metadata.c | 168 +++++++++++++++++- 14 files changed, 348 insertions(+), 27 deletions(-) -- 2.34.1

2 months, 3 weeks

5
18
0 0

[PATCH Linux-6.12.y 1/1] selftests/mm: build with -O2

by Yifei Liu

From: Kevin Brodsky <kevin.brodsky(a)arm.com> [ Upstream commit 46036188ea1f5266df23a6149dea0df1c77cd1c7 ] The mm kselftests are currently built with no optimisation (-O0). It's unclear why, and besides being obviously suboptimal, this also prevents the pkeys tests from working as intended. Let's build all the tests with -O2. [kevin.brodsky(a)arm.com: silence unused-result warnings] Link: https://lkml.kernel.org/r/20250107170110.2819685-1-kevin.brodsky@arm.com Link: https://lkml.kernel.org/r/20241209095019.1732120-6-kevin.brodsky@arm.com Signed-off-by: Kevin Brodsky <kevin.brodsky(a)arm.com> Cc: Aruna Ramakrishna <aruna.ramakrishna(a)oracle.com> Cc: Catalin Marinas <catalin.marinas(a)arm.com> Cc: Dave Hansen <dave.hansen(a)linux.intel.com> Cc: Joey Gouly <joey.gouly(a)arm.com> Cc: Keith Lucas <keith.lucas(a)oracle.com> Cc: Ryan Roberts <ryan.roberts(a)arm.com> Cc: Shuah Khan <shuah(a)kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> (cherry picked from commit 46036188ea1f5266df23a6149dea0df1c77cd1c7) [Yifei: This commit also fix the failure of pkey_sighandler_tests_64, which is also in linux-6.12.y, thus backport this commit] Signed-off-by: Yifei Liu <yifei.l.liu(a)oracle.com> --- tools/testing/selftests/mm/Makefile | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index 02e1204971b0..c0138cb19705 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -33,9 +33,16 @@ endif # LDLIBS. MAKEFLAGS += --no-builtin-rules -CFLAGS = -Wall -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES) $(TOOLS_INCLUDES) +CFLAGS = -Wall -O2 -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES) $(TOOLS_INCLUDES) LDLIBS = -lrt -lpthread -lm +# Some distributions (such as Ubuntu) configure GCC so that _FORTIFY_SOURCE is +# automatically enabled at -O1 or above. This triggers various unused-result +# warnings where functions such as read() or write() are called and their +# return value is not checked. Disable _FORTIFY_SOURCE to silence those +# warnings. +CFLAGS += -U_FORTIFY_SOURCE + TEST_GEN_FILES = cow TEST_GEN_FILES += compaction_test TEST_GEN_FILES += gup_longterm -- 2.46.0

2 months, 3 weeks

2
1
0 0

[PATCH] bpf: Fix mix-up of 4096 and page size.

by Saket Kumar Bhaskar

For platforms on powerpc architecture with a default page size greater than 4096, there was an inconsistency in fragment size calculation. This caused the BPF selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow to fail on powerpc. The issue occurred because the fragment buffer size in bpf_prog_test_run_xdp() was set to 4096, while the actual data size in the fragment within the shared skb was checked against PAGE_SIZE (65536 on powerpc) in min_t, causing it to exceed 4096 and be set accordingly. This discrepancy led to an overflow when bpf_xdp_frags_increase_tail() checked for tailroom, as skb_frag_size(frag) could be greater than rxq->frag_size (when PAGE_SIZE > 4096). This commit updates the page size references to 4096 to ensure consistency and prevent overflow issues in fragment size calculations. Fixes: 1c1949982524 ("bpf: introduce frags support to bpf_prog_test_run_xdp()") Signed-off-by: Saket Kumar Bhaskar <skb99(a)linux.ibm.com> --- net/bpf/test_run.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c index 501ec4249..eb5476184 100644 --- a/net/bpf/test_run.c +++ b/net/bpf/test_run.c @@ -124,7 +124,7 @@ struct xdp_test_data { * must be updated accordingly this gets changed, otherwise BPF selftests * will fail. */ -#define TEST_XDP_FRAME_SIZE (PAGE_SIZE - sizeof(struct xdp_page_head)) +#define TEST_XDP_FRAME_SIZE (4096 - sizeof(struct xdp_page_head)) #define TEST_XDP_MAX_BATCH 256 static void xdp_test_run_init_page(netmem_ref netmem, void *arg) @@ -660,7 +660,7 @@ static void *bpf_test_init(const union bpf_attr *kattr, u32 user_size, void __user *data_in = u64_to_user_ptr(kattr->test.data_in); void *data; - if (size < ETH_HLEN || size > PAGE_SIZE - headroom - tailroom) + if (size < ETH_HLEN || size > 4096 - headroom - tailroom) return ERR_PTR(-EINVAL); if (user_size > size) @@ -1297,7 +1297,7 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr, frag = &sinfo->frags[sinfo->nr_frags++]; data_len = min_t(u32, kattr->test.data_size_in - size, - PAGE_SIZE); + 4096); skb_frag_fill_page_desc(frag, page, 0, data_len); if (copy_from_user(page_address(page), data_in + size, -- 2.43.5

2 months, 3 weeks

3
4
0 0

[PATCH][next] KVM: selftests: Fix spelling mistake "initally" -> "initially"

by Colin Ian King

There is a spelling mistake in a literal string. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/kvm/s390/cmma_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/s390/cmma_test.c b/tools/testing/selftests/kvm/s390/cmma_test.c index e32dd59703a0..7fbbe8b912b6 100644 --- a/tools/testing/selftests/kvm/s390/cmma_test.c +++ b/tools/testing/selftests/kvm/s390/cmma_test.c @@ -651,7 +651,7 @@ struct testdef { } testlist[] = { { "migration mode and dirty tracking", test_migration_mode }, { "GET_CMMA_BITS: basic calls", test_get_cmma_basic }, - { "GET_CMMA_BITS: all pages are dirty initally", test_get_inital_dirty }, + { "GET_CMMA_BITS: all pages are dirty initially", test_get_inital_dirty }, { "GET_CMMA_BITS: holes are skipped", test_get_skip_holes }, }; -- 2.47.2

2 months, 3 weeks

2
1
0 0

[PATCH net-next v2 0/2] netdevgenl: Add an xsk attribute to queues

by Joe Damato

Greetings: This is an attempt to followup on something Jakub asked me about [1], adding an xsk attribute to queues and more clearly documenting which queues are linked to NAPIs... After the RFC [2], Jakub suggested creating an empty nest for queues which have a pool, so I've adjusted this version to work that way. The nest can be extended in the future to express attributes about XSK as needed. Queues which are not used for AF_XDP do not have the xsk attribute present. I've run the included test on: - my mlx5 machine (via NETIF=) - without setting NETIF And the test seems to pass in both cases. Thanks, Joe [1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/ [2]: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ v2: - Switched from RFC to actual submission now that net-next is open - Adjusted patch 1 to include an empty nest as suggested by Jakub - Adjusted patch 2 to update the test based on changes to patch 1, and to incorporate some Python feedback from Jakub :) rfc: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ Joe Damato (2): netdev-genl: Add an XSK attribute to queues selftests: drv-net: Test queue xsk attribute Documentation/netlink/specs/netdev.yaml | 13 ++- include/uapi/linux/netdev.h | 6 ++ net/core/netdev-genl.c | 11 +++ tools/include/uapi/linux/netdev.h | 6 ++ .../testing/selftests/drivers/net/.gitignore | 2 + tools/testing/selftests/drivers/net/Makefile | 3 + tools/testing/selftests/drivers/net/queues.py | 35 +++++++- .../selftests/drivers/net/xdp_helper.c | 90 +++++++++++++++++++ 8 files changed, 163 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/.gitignore create mode 100644 tools/testing/selftests/drivers/net/xdp_helper.c base-commit: c2933b2befe25309f4c5cfbea0ca80909735fd76 -- 2.25.1

2 months, 3 weeks

2
2
0 0

[PATCH AUTOSEL 6.1 2/2] selftests: gpio: gpio-sim: Fix missing chip disablements

by Sasha Levin

From: Koichiro Den <koichiro.den(a)canonical.com> [ Upstream commit f8524ac33cd452aef5384504b3264db6039a455e ] Since upstream commit 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on"), rmdir for an active virtual devices been prohibited. Update gpio-sim selftest to align with the change. Reported-by: kernel test robot <oliver.sang(a)intel.com> Closes: https://lore.kernel.org/oe-lkp/202501221006.a1ca5dfa-lkp@intel.com Signed-off-by: Koichiro Den <koichiro.den(a)canonical.com> Link: https://lore.kernel.org/r/20250122043309.304621-1-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/gpio/gpio-sim.sh | 31 +++++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/gpio/gpio-sim.sh b/tools/testing/selftests/gpio/gpio-sim.sh index bf67b23ed29ac..46101a800bebf 100755 --- a/tools/testing/selftests/gpio/gpio-sim.sh +++ b/tools/testing/selftests/gpio/gpio-sim.sh @@ -46,12 +46,6 @@ remove_chip() { rmdir $CONFIGFS_DIR/$CHIP || fail "Unable to remove the chip" } -configfs_cleanup() { - for CHIP in `ls $CONFIGFS_DIR/`; do - remove_chip $CHIP - done -} - create_chip() { local CHIP=$1 @@ -105,6 +99,13 @@ disable_chip() { echo 0 > $CONFIGFS_DIR/$CHIP/live || fail "Unable to disable the chip" } +configfs_cleanup() { + for CHIP in `ls $CONFIGFS_DIR/`; do + disable_chip $CHIP + remove_chip $CHIP + done +} + configfs_chip_name() { local CHIP=$1 local BANK=$2 @@ -181,6 +182,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/bank/chip_name` || fail "chip_name doesn't work" +disable_chip chip remove_chip chip echo "1.2. chip_name returns 'none' if the chip is still pending" @@ -195,6 +197,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/dev_name` || fail "dev_name doesn't work" +disable_chip chip remove_chip chip echo "2. Creating and configuring simulated chips" @@ -204,6 +207,7 @@ create_chip chip create_bank chip bank enable_chip chip test "`get_chip_num_lines chip bank`" = "1" || fail "default number of lines is not 1" +disable_chip chip remove_chip chip echo "2.2. Number of lines can be specified" @@ -212,6 +216,7 @@ create_bank chip bank set_num_lines chip bank 16 enable_chip chip test "`get_chip_num_lines chip bank`" = "16" || fail "number of lines is not 16" +disable_chip chip remove_chip chip echo "2.3. Label can be set" @@ -220,6 +225,7 @@ create_bank chip bank set_label chip bank foobar enable_chip chip test "`get_chip_label chip bank`" = "foobar" || fail "label is incorrect" +disable_chip chip remove_chip chip echo "2.4. Label can be left empty" @@ -227,6 +233,7 @@ create_chip chip create_bank chip bank enable_chip chip test -z "`cat $CONFIGFS_DIR/chip/bank/label`" || fail "label is not empty" +disable_chip chip remove_chip chip echo "2.5. Line names can be configured" @@ -238,6 +245,7 @@ set_line_name chip bank 2 bar enable_chip chip test "`get_line_name chip bank 0`" = "foo" || fail "line name is incorrect" test "`get_line_name chip bank 2`" = "bar" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.6. Line config can remain unused if offset is greater than number of lines" @@ -248,6 +256,7 @@ set_line_name chip bank 5 foobar enable_chip chip test "`get_line_name chip bank 0`" = "" || fail "line name is incorrect" test "`get_line_name chip bank 1`" = "" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.7. Line configfs directory names are sanitized" @@ -267,6 +276,7 @@ for CHIP in $CHIPS; do enable_chip $CHIP done for CHIP in $CHIPS; do + disable_chip $CHIP remove_chip $CHIP done @@ -278,6 +288,7 @@ echo foobar > $CONFIGFS_DIR/chip/bank/label 2> /dev/null && \ fail "Setting label of a live chip should fail" echo 8 > $CONFIGFS_DIR/chip/bank/num_lines 2> /dev/null && \ fail "Setting number of lines of a live chip should fail" +disable_chip chip remove_chip chip echo "2.10. Can't create line items when chip is live" @@ -285,6 +296,7 @@ create_chip chip create_bank chip bank enable_chip chip mkdir $CONFIGFS_DIR/chip/bank/line0 2> /dev/null && fail "Creating line item should fail" +disable_chip chip remove_chip chip echo "2.11. Probe errors are propagated to user-space" @@ -316,6 +328,7 @@ mkdir -p $CONFIGFS_DIR/chip/bank/line4/hog enable_chip chip $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 4 2> /dev/null && \ fail "Setting the value of a hogged line shouldn't succeed" +disable_chip chip remove_chip chip echo "3. Controlling simulated chips" @@ -331,6 +344,7 @@ test "$?" = "1" || fail "pull set incorrectly" sysfs_set_pull chip bank 0 pull-down $BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip bank` 1 test "$?" = "0" || fail "pull set incorrectly" +disable_chip chip remove_chip chip echo "3.2. Pull can be read from sysfs" @@ -344,6 +358,7 @@ SYSFS_PATH=/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull test `cat $SYSFS_PATH` = "pull-down" || fail "reading the pull failed" sysfs_set_pull chip bank 0 pull-up test `cat $SYSFS_PATH` = "pull-up" || fail "reading the pull failed" +disable_chip chip remove_chip chip echo "3.3. Incorrect input in sysfs is rejected" @@ -355,6 +370,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull" echo foobar > $SYSFS_PATH 2> /dev/null && fail "invalid input not detected" +disable_chip chip remove_chip chip echo "3.4. Can't write to value" @@ -365,6 +381,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" echo 1 > $SYSFS_PATH 2> /dev/null && fail "writing to 'value' succeeded unexpectedly" +disable_chip chip remove_chip chip echo "4. Simulated GPIO chips are functional" @@ -382,6 +399,7 @@ $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 0 & sleep 0.1 # FIXME Any better way? test `cat $SYSFS_PATH` = "1" || fail "incorrect value read from sysfs" kill $! +disable_chip chip remove_chip chip echo "4.2. Bias settings work correctly" @@ -394,6 +412,7 @@ CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" $BASE_DIR/gpio-mockup-cdev -b pull-up /dev/`configfs_chip_name chip bank` 0 test `cat $SYSFS_PATH` = "1" || fail "bias setting does not work" +disable_chip chip remove_chip chip echo "GPIO $MODULE test PASS" -- 2.39.5

2 months, 3 weeks

1
0
0 0

[PATCH AUTOSEL 6.6 2/3] selftests: gpio: gpio-sim: Fix missing chip disablements

by Sasha Levin

From: Koichiro Den <koichiro.den(a)canonical.com> [ Upstream commit f8524ac33cd452aef5384504b3264db6039a455e ] Since upstream commit 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on"), rmdir for an active virtual devices been prohibited. Update gpio-sim selftest to align with the change. Reported-by: kernel test robot <oliver.sang(a)intel.com> Closes: https://lore.kernel.org/oe-lkp/202501221006.a1ca5dfa-lkp@intel.com Signed-off-by: Koichiro Den <koichiro.den(a)canonical.com> Link: https://lore.kernel.org/r/20250122043309.304621-1-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/gpio/gpio-sim.sh | 31 +++++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/gpio/gpio-sim.sh b/tools/testing/selftests/gpio/gpio-sim.sh index 6fb66a687f173..bbc29ed9c60a9 100755 --- a/tools/testing/selftests/gpio/gpio-sim.sh +++ b/tools/testing/selftests/gpio/gpio-sim.sh @@ -46,12 +46,6 @@ remove_chip() { rmdir $CONFIGFS_DIR/$CHIP || fail "Unable to remove the chip" } -configfs_cleanup() { - for CHIP in `ls $CONFIGFS_DIR/`; do - remove_chip $CHIP - done -} - create_chip() { local CHIP=$1 @@ -105,6 +99,13 @@ disable_chip() { echo 0 > $CONFIGFS_DIR/$CHIP/live || fail "Unable to disable the chip" } +configfs_cleanup() { + for CHIP in `ls $CONFIGFS_DIR/`; do + disable_chip $CHIP + remove_chip $CHIP + done +} + configfs_chip_name() { local CHIP=$1 local BANK=$2 @@ -181,6 +182,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/bank/chip_name` || fail "chip_name doesn't work" +disable_chip chip remove_chip chip echo "1.2. chip_name returns 'none' if the chip is still pending" @@ -195,6 +197,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/dev_name` || fail "dev_name doesn't work" +disable_chip chip remove_chip chip echo "2. Creating and configuring simulated chips" @@ -204,6 +207,7 @@ create_chip chip create_bank chip bank enable_chip chip test "`get_chip_num_lines chip bank`" = "1" || fail "default number of lines is not 1" +disable_chip chip remove_chip chip echo "2.2. Number of lines can be specified" @@ -212,6 +216,7 @@ create_bank chip bank set_num_lines chip bank 16 enable_chip chip test "`get_chip_num_lines chip bank`" = "16" || fail "number of lines is not 16" +disable_chip chip remove_chip chip echo "2.3. Label can be set" @@ -220,6 +225,7 @@ create_bank chip bank set_label chip bank foobar enable_chip chip test "`get_chip_label chip bank`" = "foobar" || fail "label is incorrect" +disable_chip chip remove_chip chip echo "2.4. Label can be left empty" @@ -227,6 +233,7 @@ create_chip chip create_bank chip bank enable_chip chip test -z "`cat $CONFIGFS_DIR/chip/bank/label`" || fail "label is not empty" +disable_chip chip remove_chip chip echo "2.5. Line names can be configured" @@ -238,6 +245,7 @@ set_line_name chip bank 2 bar enable_chip chip test "`get_line_name chip bank 0`" = "foo" || fail "line name is incorrect" test "`get_line_name chip bank 2`" = "bar" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.6. Line config can remain unused if offset is greater than number of lines" @@ -248,6 +256,7 @@ set_line_name chip bank 5 foobar enable_chip chip test "`get_line_name chip bank 0`" = "" || fail "line name is incorrect" test "`get_line_name chip bank 1`" = "" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.7. Line configfs directory names are sanitized" @@ -267,6 +276,7 @@ for CHIP in $CHIPS; do enable_chip $CHIP done for CHIP in $CHIPS; do + disable_chip $CHIP remove_chip $CHIP done @@ -278,6 +288,7 @@ echo foobar > $CONFIGFS_DIR/chip/bank/label 2> /dev/null && \ fail "Setting label of a live chip should fail" echo 8 > $CONFIGFS_DIR/chip/bank/num_lines 2> /dev/null && \ fail "Setting number of lines of a live chip should fail" +disable_chip chip remove_chip chip echo "2.10. Can't create line items when chip is live" @@ -285,6 +296,7 @@ create_chip chip create_bank chip bank enable_chip chip mkdir $CONFIGFS_DIR/chip/bank/line0 2> /dev/null && fail "Creating line item should fail" +disable_chip chip remove_chip chip echo "2.11. Probe errors are propagated to user-space" @@ -316,6 +328,7 @@ mkdir -p $CONFIGFS_DIR/chip/bank/line4/hog enable_chip chip $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 4 2> /dev/null && \ fail "Setting the value of a hogged line shouldn't succeed" +disable_chip chip remove_chip chip echo "3. Controlling simulated chips" @@ -331,6 +344,7 @@ test "$?" = "1" || fail "pull set incorrectly" sysfs_set_pull chip bank 0 pull-down $BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip bank` 1 test "$?" = "0" || fail "pull set incorrectly" +disable_chip chip remove_chip chip echo "3.2. Pull can be read from sysfs" @@ -344,6 +358,7 @@ SYSFS_PATH=/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull test `cat $SYSFS_PATH` = "pull-down" || fail "reading the pull failed" sysfs_set_pull chip bank 0 pull-up test `cat $SYSFS_PATH` = "pull-up" || fail "reading the pull failed" +disable_chip chip remove_chip chip echo "3.3. Incorrect input in sysfs is rejected" @@ -355,6 +370,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull" echo foobar > $SYSFS_PATH 2> /dev/null && fail "invalid input not detected" +disable_chip chip remove_chip chip echo "3.4. Can't write to value" @@ -365,6 +381,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" echo 1 > $SYSFS_PATH 2> /dev/null && fail "writing to 'value' succeeded unexpectedly" +disable_chip chip remove_chip chip echo "4. Simulated GPIO chips are functional" @@ -382,6 +399,7 @@ $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 0 & sleep 0.1 # FIXME Any better way? test `cat $SYSFS_PATH` = "1" || fail "incorrect value read from sysfs" kill $! +disable_chip chip remove_chip chip echo "4.2. Bias settings work correctly" @@ -394,6 +412,7 @@ CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" $BASE_DIR/gpio-mockup-cdev -b pull-up /dev/`configfs_chip_name chip bank` 0 test `cat $SYSFS_PATH` = "1" || fail "bias setting does not work" +disable_chip chip remove_chip chip echo "GPIO $MODULE test PASS" -- 2.39.5

2 months, 3 weeks

1
0
0 0

[PATCH AUTOSEL 6.12 3/4] selftests: gpio: gpio-sim: Fix missing chip disablements

by Sasha Levin

From: Koichiro Den <koichiro.den(a)canonical.com> [ Upstream commit f8524ac33cd452aef5384504b3264db6039a455e ] Since upstream commit 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on"), rmdir for an active virtual devices been prohibited. Update gpio-sim selftest to align with the change. Reported-by: kernel test robot <oliver.sang(a)intel.com> Closes: https://lore.kernel.org/oe-lkp/202501221006.a1ca5dfa-lkp@intel.com Signed-off-by: Koichiro Den <koichiro.den(a)canonical.com> Link: https://lore.kernel.org/r/20250122043309.304621-1-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/gpio/gpio-sim.sh | 31 +++++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/gpio/gpio-sim.sh b/tools/testing/selftests/gpio/gpio-sim.sh index 6fb66a687f173..bbc29ed9c60a9 100755 --- a/tools/testing/selftests/gpio/gpio-sim.sh +++ b/tools/testing/selftests/gpio/gpio-sim.sh @@ -46,12 +46,6 @@ remove_chip() { rmdir $CONFIGFS_DIR/$CHIP || fail "Unable to remove the chip" } -configfs_cleanup() { - for CHIP in `ls $CONFIGFS_DIR/`; do - remove_chip $CHIP - done -} - create_chip() { local CHIP=$1 @@ -105,6 +99,13 @@ disable_chip() { echo 0 > $CONFIGFS_DIR/$CHIP/live || fail "Unable to disable the chip" } +configfs_cleanup() { + for CHIP in `ls $CONFIGFS_DIR/`; do + disable_chip $CHIP + remove_chip $CHIP + done +} + configfs_chip_name() { local CHIP=$1 local BANK=$2 @@ -181,6 +182,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/bank/chip_name` || fail "chip_name doesn't work" +disable_chip chip remove_chip chip echo "1.2. chip_name returns 'none' if the chip is still pending" @@ -195,6 +197,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/dev_name` || fail "dev_name doesn't work" +disable_chip chip remove_chip chip echo "2. Creating and configuring simulated chips" @@ -204,6 +207,7 @@ create_chip chip create_bank chip bank enable_chip chip test "`get_chip_num_lines chip bank`" = "1" || fail "default number of lines is not 1" +disable_chip chip remove_chip chip echo "2.2. Number of lines can be specified" @@ -212,6 +216,7 @@ create_bank chip bank set_num_lines chip bank 16 enable_chip chip test "`get_chip_num_lines chip bank`" = "16" || fail "number of lines is not 16" +disable_chip chip remove_chip chip echo "2.3. Label can be set" @@ -220,6 +225,7 @@ create_bank chip bank set_label chip bank foobar enable_chip chip test "`get_chip_label chip bank`" = "foobar" || fail "label is incorrect" +disable_chip chip remove_chip chip echo "2.4. Label can be left empty" @@ -227,6 +233,7 @@ create_chip chip create_bank chip bank enable_chip chip test -z "`cat $CONFIGFS_DIR/chip/bank/label`" || fail "label is not empty" +disable_chip chip remove_chip chip echo "2.5. Line names can be configured" @@ -238,6 +245,7 @@ set_line_name chip bank 2 bar enable_chip chip test "`get_line_name chip bank 0`" = "foo" || fail "line name is incorrect" test "`get_line_name chip bank 2`" = "bar" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.6. Line config can remain unused if offset is greater than number of lines" @@ -248,6 +256,7 @@ set_line_name chip bank 5 foobar enable_chip chip test "`get_line_name chip bank 0`" = "" || fail "line name is incorrect" test "`get_line_name chip bank 1`" = "" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.7. Line configfs directory names are sanitized" @@ -267,6 +276,7 @@ for CHIP in $CHIPS; do enable_chip $CHIP done for CHIP in $CHIPS; do + disable_chip $CHIP remove_chip $CHIP done @@ -278,6 +288,7 @@ echo foobar > $CONFIGFS_DIR/chip/bank/label 2> /dev/null && \ fail "Setting label of a live chip should fail" echo 8 > $CONFIGFS_DIR/chip/bank/num_lines 2> /dev/null && \ fail "Setting number of lines of a live chip should fail" +disable_chip chip remove_chip chip echo "2.10. Can't create line items when chip is live" @@ -285,6 +296,7 @@ create_chip chip create_bank chip bank enable_chip chip mkdir $CONFIGFS_DIR/chip/bank/line0 2> /dev/null && fail "Creating line item should fail" +disable_chip chip remove_chip chip echo "2.11. Probe errors are propagated to user-space" @@ -316,6 +328,7 @@ mkdir -p $CONFIGFS_DIR/chip/bank/line4/hog enable_chip chip $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 4 2> /dev/null && \ fail "Setting the value of a hogged line shouldn't succeed" +disable_chip chip remove_chip chip echo "3. Controlling simulated chips" @@ -331,6 +344,7 @@ test "$?" = "1" || fail "pull set incorrectly" sysfs_set_pull chip bank 0 pull-down $BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip bank` 1 test "$?" = "0" || fail "pull set incorrectly" +disable_chip chip remove_chip chip echo "3.2. Pull can be read from sysfs" @@ -344,6 +358,7 @@ SYSFS_PATH=/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull test `cat $SYSFS_PATH` = "pull-down" || fail "reading the pull failed" sysfs_set_pull chip bank 0 pull-up test `cat $SYSFS_PATH` = "pull-up" || fail "reading the pull failed" +disable_chip chip remove_chip chip echo "3.3. Incorrect input in sysfs is rejected" @@ -355,6 +370,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull" echo foobar > $SYSFS_PATH 2> /dev/null && fail "invalid input not detected" +disable_chip chip remove_chip chip echo "3.4. Can't write to value" @@ -365,6 +381,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" echo 1 > $SYSFS_PATH 2> /dev/null && fail "writing to 'value' succeeded unexpectedly" +disable_chip chip remove_chip chip echo "4. Simulated GPIO chips are functional" @@ -382,6 +399,7 @@ $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 0 & sleep 0.1 # FIXME Any better way? test `cat $SYSFS_PATH` = "1" || fail "incorrect value read from sysfs" kill $! +disable_chip chip remove_chip chip echo "4.2. Bias settings work correctly" @@ -394,6 +412,7 @@ CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" $BASE_DIR/gpio-mockup-cdev -b pull-up /dev/`configfs_chip_name chip bank` 0 test `cat $SYSFS_PATH` = "1" || fail "bias setting does not work" +disable_chip chip remove_chip chip echo "GPIO $MODULE test PASS" -- 2.39.5

2 months, 3 weeks

1
0
0 0

[PATCH AUTOSEL 6.13 4/5] selftests: gpio: gpio-sim: Fix missing chip disablements

by Sasha Levin

From: Koichiro Den <koichiro.den(a)canonical.com> [ Upstream commit f8524ac33cd452aef5384504b3264db6039a455e ] Since upstream commit 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on"), rmdir for an active virtual devices been prohibited. Update gpio-sim selftest to align with the change. Reported-by: kernel test robot <oliver.sang(a)intel.com> Closes: https://lore.kernel.org/oe-lkp/202501221006.a1ca5dfa-lkp@intel.com Signed-off-by: Koichiro Den <koichiro.den(a)canonical.com> Link: https://lore.kernel.org/r/20250122043309.304621-1-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/gpio/gpio-sim.sh | 31 +++++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/gpio/gpio-sim.sh b/tools/testing/selftests/gpio/gpio-sim.sh index 6fb66a687f173..bbc29ed9c60a9 100755 --- a/tools/testing/selftests/gpio/gpio-sim.sh +++ b/tools/testing/selftests/gpio/gpio-sim.sh @@ -46,12 +46,6 @@ remove_chip() { rmdir $CONFIGFS_DIR/$CHIP || fail "Unable to remove the chip" } -configfs_cleanup() { - for CHIP in `ls $CONFIGFS_DIR/`; do - remove_chip $CHIP - done -} - create_chip() { local CHIP=$1 @@ -105,6 +99,13 @@ disable_chip() { echo 0 > $CONFIGFS_DIR/$CHIP/live || fail "Unable to disable the chip" } +configfs_cleanup() { + for CHIP in `ls $CONFIGFS_DIR/`; do + disable_chip $CHIP + remove_chip $CHIP + done +} + configfs_chip_name() { local CHIP=$1 local BANK=$2 @@ -181,6 +182,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/bank/chip_name` || fail "chip_name doesn't work" +disable_chip chip remove_chip chip echo "1.2. chip_name returns 'none' if the chip is still pending" @@ -195,6 +197,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/dev_name` || fail "dev_name doesn't work" +disable_chip chip remove_chip chip echo "2. Creating and configuring simulated chips" @@ -204,6 +207,7 @@ create_chip chip create_bank chip bank enable_chip chip test "`get_chip_num_lines chip bank`" = "1" || fail "default number of lines is not 1" +disable_chip chip remove_chip chip echo "2.2. Number of lines can be specified" @@ -212,6 +216,7 @@ create_bank chip bank set_num_lines chip bank 16 enable_chip chip test "`get_chip_num_lines chip bank`" = "16" || fail "number of lines is not 16" +disable_chip chip remove_chip chip echo "2.3. Label can be set" @@ -220,6 +225,7 @@ create_bank chip bank set_label chip bank foobar enable_chip chip test "`get_chip_label chip bank`" = "foobar" || fail "label is incorrect" +disable_chip chip remove_chip chip echo "2.4. Label can be left empty" @@ -227,6 +233,7 @@ create_chip chip create_bank chip bank enable_chip chip test -z "`cat $CONFIGFS_DIR/chip/bank/label`" || fail "label is not empty" +disable_chip chip remove_chip chip echo "2.5. Line names can be configured" @@ -238,6 +245,7 @@ set_line_name chip bank 2 bar enable_chip chip test "`get_line_name chip bank 0`" = "foo" || fail "line name is incorrect" test "`get_line_name chip bank 2`" = "bar" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.6. Line config can remain unused if offset is greater than number of lines" @@ -248,6 +256,7 @@ set_line_name chip bank 5 foobar enable_chip chip test "`get_line_name chip bank 0`" = "" || fail "line name is incorrect" test "`get_line_name chip bank 1`" = "" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.7. Line configfs directory names are sanitized" @@ -267,6 +276,7 @@ for CHIP in $CHIPS; do enable_chip $CHIP done for CHIP in $CHIPS; do + disable_chip $CHIP remove_chip $CHIP done @@ -278,6 +288,7 @@ echo foobar > $CONFIGFS_DIR/chip/bank/label 2> /dev/null && \ fail "Setting label of a live chip should fail" echo 8 > $CONFIGFS_DIR/chip/bank/num_lines 2> /dev/null && \ fail "Setting number of lines of a live chip should fail" +disable_chip chip remove_chip chip echo "2.10. Can't create line items when chip is live" @@ -285,6 +296,7 @@ create_chip chip create_bank chip bank enable_chip chip mkdir $CONFIGFS_DIR/chip/bank/line0 2> /dev/null && fail "Creating line item should fail" +disable_chip chip remove_chip chip echo "2.11. Probe errors are propagated to user-space" @@ -316,6 +328,7 @@ mkdir -p $CONFIGFS_DIR/chip/bank/line4/hog enable_chip chip $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 4 2> /dev/null && \ fail "Setting the value of a hogged line shouldn't succeed" +disable_chip chip remove_chip chip echo "3. Controlling simulated chips" @@ -331,6 +344,7 @@ test "$?" = "1" || fail "pull set incorrectly" sysfs_set_pull chip bank 0 pull-down $BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip bank` 1 test "$?" = "0" || fail "pull set incorrectly" +disable_chip chip remove_chip chip echo "3.2. Pull can be read from sysfs" @@ -344,6 +358,7 @@ SYSFS_PATH=/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull test `cat $SYSFS_PATH` = "pull-down" || fail "reading the pull failed" sysfs_set_pull chip bank 0 pull-up test `cat $SYSFS_PATH` = "pull-up" || fail "reading the pull failed" +disable_chip chip remove_chip chip echo "3.3. Incorrect input in sysfs is rejected" @@ -355,6 +370,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull" echo foobar > $SYSFS_PATH 2> /dev/null && fail "invalid input not detected" +disable_chip chip remove_chip chip echo "3.4. Can't write to value" @@ -365,6 +381,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" echo 1 > $SYSFS_PATH 2> /dev/null && fail "writing to 'value' succeeded unexpectedly" +disable_chip chip remove_chip chip echo "4. Simulated GPIO chips are functional" @@ -382,6 +399,7 @@ $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 0 & sleep 0.1 # FIXME Any better way? test `cat $SYSFS_PATH` = "1" || fail "incorrect value read from sysfs" kill $! +disable_chip chip remove_chip chip echo "4.2. Bias settings work correctly" @@ -394,6 +412,7 @@ CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" $BASE_DIR/gpio-mockup-cdev -b pull-up /dev/`configfs_chip_name chip bank` 0 test `cat $SYSFS_PATH` = "1" || fail "bias setting does not work" +disable_chip chip remove_chip chip echo "GPIO $MODULE test PASS" -- 2.39.5

2 months, 3 weeks

1
0
0 0

[RFC PATCH 0/4] PMU partitioning driver support

by Colton Lewis

This series introduces support in the ARM PMUv3 driver for partitioning PMU counters into two separate ranges by taking advantage of the MDCR_EL2.HPMN register field. The advantage of a partitioned PMU would be to allow KVM guests direct access to a subset of PMU functionality, greatly reducing the overhead of performance monitoring in guests. While this series could be accepted on its own merits, practically there is a lot more to be done before it will be fully useful, so I'm sending as an RFC for now. This patch is based on v6.13-rc7. It needs a small additional change after Oliver's Debug cleanups series going into 6.14, specifically this patch [1], because it changes kvm_arm_setup_mdcr_el2() to initialize HPMN from a cached value read early in the boot process instead of reading from the register. The only sensible way I can see to deal with this is returning to reading the register. [1] https://lore.kernel.org/kvmarm/20241219224116.3941496-3-oliver.upton@linux.… Colton Lewis (4): perf: arm_pmuv3: Introduce module param to partition the PMU KVM: arm64: Make guests see only counters they can access perf: arm_pmuv3: Generalize counter bitmasks perf: arm_pmuv3: Keep out of guest counter partition arch/arm/include/asm/arm_pmuv3.h | 10 ++ arch/arm64/include/asm/arm_pmuv3.h | 10 ++ arch/arm64/kvm/pmu-emul.c | 8 +- drivers/perf/arm_pmuv3.c | 113 ++++++++++++++++-- include/linux/perf/arm_pmu.h | 2 + include/linux/perf/arm_pmuv3.h | 34 +++++- .../kvm/aarch64/vpmu_counter_access.c | 2 +- 7 files changed, 160 insertions(+), 19 deletions(-) base-commit: 5bc55a333a2f7316b58edc7573e8e893f7acb532 -- 2.48.1.262.g85cc9f2d1e-goog

2 months, 3 weeks

4
14
0 0

Re: [PATCH 2/3] KVM: x86: Add support for VMware guest specific hypercalls

by Doug Covelli

On Wed, Nov 13, 2024 at 2:31 AM Paolo Bonzini <pbonzini(a)redhat.com> wrote: > > > > Il mar 12 nov 2024, 21:44 Doug Covelli <doug.covelli(a)broadcom.com> ha scritto: >> >> > Split irqchip should be the best tradeoff. Without it, moves from cr8 >> > stay in the kernel, but moves to cr8 always go to userspace with a >> > KVM_EXIT_SET_TPR exit. You also won't be able to use Intel >> > flexpriority (in-processor accelerated TPR) because KVM does not know >> > which bits are set in IRR. So it will be *really* every move to cr8 >> > that goes to userspace. >> >> Sorry to hijack this thread but is there a technical reason not to allow CR8 >> based accesses to the TPR (not MMIO accesses) when the in-kernel local APIC is >> not in use? > > > No worries, you're not hijacking :) The only reason is that it would be more code for a seldom used feature and anyway with worse performance. (To be clear, CR8 based accesses are allowed, but stores cause an exit in order to check the new TPR against IRR. That's because KVM's API does not have an equivalent of the TPR threshold as you point out below). I have not really looked at the code but it seems like it could also simplify things as CR8 would be handled more uniformly regardless of who is virtualizing the local APIC. >> Also I could not find these documented anywhere but with MSFT's APIC our monitor >> relies on extensions for trapping certain events such as INIT/SIPI plus LINT0 >> and SVR writes: >> >> UINT64 X64ApicInitSipiExitTrap : 1; // WHvRunVpExitReasonX64ApicInitSipiTrap >> UINT64 X64ApicWriteLint0ExitTrap : 1; // WHvRunVpExitReasonX64ApicWriteTrap >> UINT64 X64ApicWriteLint1ExitTrap : 1; // WHvRunVpExitReasonX64ApicWriteTrap >> UINT64 X64ApicWriteSvrExitTrap : 1; // WHvRunVpExitReasonX64ApicWriteTrap > > > There's no need for this in KVM's in-kernel APIC model. INIT and SIPI are handled in the hypervisor and you can get the current state of APs via KVM_GET_MPSTATE. LINT0 and LINT1 are injected with KVM_INTERRUPT and KVM_NMI respectively, and they obey IF/PPR and NMI blocking respectively, plus the interrupt shadow; so there's no need for userspace to know when LINT0/LINT1 themselves change. The spurious interrupt vector register is also handled completely in kernel. I realize that KVM can handle LINT0/SVR updates themselves but our interrupt subsystem relies on knowing the current values of these registers even when not virtualizing the local APIC. I suppose we could use KVM_GET_LAPIC to sync things up on demand but that seems like it might nor be great from a performance point of view. >> I did not see any similar functionality for KVM. Does anything like that exist? >> In any case we would be happy to add support for handling CR8 accesses w/o >> exiting w/o the in-kernel APIC along with some sort of a way to configure the >> TPR threshold if folks are not opposed to that. > > > As far I know everybody who's using KVM (whether proprietary or open source) has had no need for that, so I don't think it's a good idea to make the API more complex. Performance of Windows guests is going to be bad anyway with userspace APIC. From what I have seen the exit cost with KVM is significantly lower than with WHP/Hyper-V. I don't think performance of Windows guests with userspace APIC emulation would be bad if CR8 exits could be avoided (Linux guests perf isn't bad from what I have observed and the main difference is the astronomical number of CR8 exits). It seems like it would be pretty decent although I agree if you want the absolute best performance then you would want to use the in kernel APIC to speed up handling of ICR/EOI writes but those are relatively infrequent compared to CR8 accesses . Anyway I just saw Sean's response while writing this and it seems he is not in favor of avoiding CR8 exits w/o the in kernel APIC either so I suppose we will have to look into making use of the in kernel APIC. Doug > Paolo > >> Doug >> >> > > For now I think it makes sense to handle BDOOR_CMD_GET_VCPU_INFO at userlevel >> > > like we do on Windows and macOS. >> > > >> > > BDOOR_CMD_GETTIME/BDOOR_CMD_GETTIMEFULL are similar with the former being >> > > deprecated in favor of the latter. Both do essentially the same thing which is >> > > to return the host OS's time - on Linux this is obtained via gettimeofday. I >> > > believe this is mainly used by tools to fix up the VM's time when resuming from >> > > suspend. I think it is fine to continue handling these at userlevel. >> > >> > As long as the TSC is not involved it should be okay. >> > >> > Paolo >> > >> > > > >> Anyway, one question apart from this: is the API the same for the I/O >> > > > >> port and hypercall backdoors? >> > > > > >> > > > > Yeah the calls and arguments are the same. The hypercall based >> > > > > interface is an attempt to modernize the backdoor since as you pointed >> > > > > out the I/O based interface is kind of hacky as it bypasses the normal >> > > > > checks for an I/O port access at CPL3. It would be nice to get rid of >> > > > > it but unfortunately I don't think that will happen in the foreseeable >> > > > > future as there are a lot of existing VMs out there with older SW that >> > > > > still uses this interface. >> > > > >> > > > Yeah, but I think it still justifies that the KVM_ENABLE_CAP API can >> > > > enable the hypercall but not the I/O port. >> > > > >> > > > Paolo >> > >> >> -- >> This electronic communication and the information and any files transmitted >> with it, or attached to it, are confidential and are intended solely for >> the use of the individual or entity to whom it is addressed and may contain >> information that is confidential, legally privileged, protected by privacy >> laws, or otherwise restricted from disclosure to anyone else. If you are >> not the intended recipient or the person responsible for delivering the >> e-mail to the intended recipient, you are hereby notified that any use, >> copying, distributing, dissemination, forwarding, printing, or copying of >> this e-mail is strictly prohibited. If you received this e-mail in error, >> please return the e-mail to the sender, delete it from your computer, and >> destroy any printed copy of it. >> -- This electronic communication and the information and any files transmitted with it, or attached to it, are confidential and are intended solely for the use of the individual or entity to whom it is addressed and may contain information that is confidential, legally privileged, protected by privacy laws, or otherwise restricted from disclosure to anyone else. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, you are hereby notified that any use, copying, distributing, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If you received this e-mail in error, please return the e-mail to the sender, delete it from your computer, and destroy any printed copy of it.

2 months, 3 weeks

3
12
0 0

[PATCH 0/6] selftests/nolibc: wire up riscv32

by Thomas Weißschuh

Nolibc has support for riscv32. But the testsuite did not allow to test it so far. Add a test configuration. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Thomas Weißschuh (6): tools/nolibc: add support for waitid() selftests/nolibc: use waitid() over waitpid() selftests/nolibc: use a pipe to in vfprintf tests selftests/nolibc: skip tests for unimplemented syscalls selftests/nolibc: rename riscv to riscv64 selftests/nolibc: add configurations for riscv32 tools/include/nolibc/sys.h | 18 ++++++++++++ tools/testing/selftests/nolibc/Makefile | 11 +++++++ tools/testing/selftests/nolibc/nolibc-test.c | 44 ++++++++++++++++------------ tools/testing/selftests/nolibc/run-tests.sh | 2 +- 4 files changed, 56 insertions(+), 19 deletions(-) --- base-commit: 499551201b5f4fd3c0618a3e95e3d0d15ea18f31 change-id: 20241219-nolibc-rv32-cff8a3e22394 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

2 months, 3 weeks

4
12
0 0

[PATCH bpf-next 0/3] bpf: Some fixes for nullness elision

by Daniel Xu

Two fixes for nullness elision. See commits for more details. Daniel Xu (3): bpf: verifier: Do not extract constant map keys for irrelevant maps bpf: selftests: Test constant key extraction on irrelevant maps bpf: verifier: Disambiguate get_constant_map_key() errors kernel/bpf/verifier.c | 29 ++++++++++++++----- .../bpf/progs/verifier_array_access.c | 15 ++++++++++ 2 files changed, 36 insertions(+), 8 deletions(-) -- 2.47.1

2 months, 3 weeks

2
2
0 0

[PATCH RFC net-next] netconsole: selftest: Add test for fragmented messages

by Breno Leitao

Add a new selftest to verify netconsole's handling of messages that exceed the packet size limit and require fragmentation. The test sends messages with varying sizes and userdata, validating that: 1. Large messages are correctly fragmented and reassembled 2. Userdata fields are properly preserved across fragments 3. Messages work correctly with and without kernel release version appending The test creates a networking environment using netdevsim, sends messages through /dev/kmsg, and verifies the received fragments maintain message integrity. Signed-off-by: Breno Leitao <leitao(a)debian.org> --- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 7 ++ .../drivers/net/netcons_fragmented_msg.sh | 122 +++++++++++++++++++++ 3 files changed, 130 insertions(+) diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index 137470bdee0c7fd2517bd1baafc12d575de4b4ac..c7f1c443f2af091aa13f67dd1df9ae05d7a43f40 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -7,6 +7,7 @@ TEST_INCLUDES := $(wildcard lib/py/*.py) \ TEST_PROGS := \ netcons_basic.sh \ + netcons_fragmented_msg.sh \ netcons_overflow.sh \ ping.py \ queues.py \ diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh index 3acaba41ac7b21aa2fd8457ed640a5ac8a41bc12..0c262b123fdd3082c40b2bd899ec626d223226ed 100644 --- a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh +++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh @@ -110,6 +110,13 @@ function create_dynamic_target() { echo 1 > "${NETCONS_PATH}"/enabled } +# Do not append the release to the header of the message +function disable_release_append() { + echo 0 > "${NETCONS_PATH}"/enabled + echo 0 > "${NETCONS_PATH}"/release + echo 1 > "${NETCONS_PATH}"/enabled +} + function cleanup() { local NSIM_DEV_SYS_DEL="/sys/bus/netdevsim/del_device" diff --git a/tools/testing/selftests/drivers/net/netcons_fragmented_msg.sh b/tools/testing/selftests/drivers/net/netcons_fragmented_msg.sh new file mode 100755 index 0000000000000000000000000000000000000000..d175d5b9db662ab9a6ee203794569cc620801a4f --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_fragmented_msg.sh @@ -0,0 +1,122 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# Test netconsole's message fragmentation functionality. +# +# When a message exceeds the maximum packet size, netconsole splits it into +# multiple fragments for transmission. This test verifies: +# - Correct fragmentation of large messages +# - Proper reassembly of fragments at the receiver +# - Preservation of userdata across fragments +# - Behavior with and without kernel release version appending +# +# Author: Breno Leitao <leitao(a)debian.org> + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +source "${SCRIPTDIR}"/lib/sh/lib_netcons.sh + +modprobe netdevsim 2> /dev/null || true +modprobe netconsole 2> /dev/null || true + +# The content of kmsg will be save to the following file +OUTPUT_FILE="/tmp/${TARGET}" + +# set userdata to a long value. In this case, it is "1-2-3-4...50-" +USERDATA_VALUE=$(printf -- '%.2s-' {1..60}) + +# Convert the header string in a regexp, so, we can remove +# the second header as well. +# A header looks like "13,468,514729715,-,ncfrag=0/1135;". If +# release is appended, you might find something like:L +# "6.13.0-04048-g4f561a87745a,13,468,514729715,-,ncfrag=0/1135;" +function header_to_regex() { + # header is everything before ; + local HEADER="${1}" + REGEX=$(echo "${HEADER}" | cut -d'=' -f1) + echo "${REGEX}=[0-9]*\/[0-9]*;" +} + +# We have two headers in the message. Remove both to get the full message, +# and extract the full message. +function extract_msg() { + local MSGFILE="${1}" + # Extract the header, which is the very first thing that arrives in the + # first list. + HEADER=$(sed -n '1p' "${MSGFILE}" | cut -d';' -f1) + HEADER_REGEX=$(header_to_regex "${HEADER}") + + # Remove the two headers from the received message + # This will return the message without any header, similarly to what + # was sent. + sed "s/""${HEADER_REGEX}""//g" "${MSGFILE}" +} + +# Validate the message, which has two messages glued together. +# unwrap them to make sure all the characters were transmitted. +# File will look like the following: +# 13,468,514729715,-,ncfrag=0/1135;MSG1=MSG2=MSG3=MSG4=MSG5=MSG6=MSG7=MSG8=MSG9=MSG10=MSG11=MSG12=MSG13=MSG14=MSG15=MSG16=MSG17=MSG18=MSG19=MSG20=MSG21=MSG22=MSG23=MSG24=MSG25=MSG26=MSG27=MSG28=MSG29=MSG30=MSG31=MSG32=MSG33=MSG34=MSG35=MSG36=MSG37=MSG38=MSG39=MSG40=MSG41=MSG42=MSG43=MSG44=MSG45=MSG46=MSG47=MSG48=MSG49=MSG50=MSG51=MSG52=MSG53=MSG54=MSG55=MSG56=MSG57=MSG58=MSG59=MSG60=MSG61=MSG62=MSG63=MSG64=MSG65=MSG66=MSG67=MSG68=MSG69=MSG70=MSG71=MSG72=MSG73=MSG74=MSG75=MSG76=MSG77=MSG78=MSG79=MSG80=MSG81=MSG82=MSG83=MSG84=MSG85=MSG86=MSG87=MSG88=MSG89=MSG90=MSG91=MSG92=MSG93=MSG94=MSG95=MSG96=MSG97=MSG98=MSG99=MSG100=MSG101=MSG102=MSG103=MSG104=MSG105=MSG106=MSG107=MSG108=MSG109=MSG110=MSG111=MSG112=MSG113=MSG114=MSG115=MSG116=MSG117=MSG118=MSG119=MSG120=MSG121=MSG122=MSG123=MSG124=MSG125=MSG126=MSG127=MSG128=MSG129=MSG130=MSG131=MSG132=MSG133=MSG134=MSG135=MSG136=MSG137=MSG138=MSG139=MSG140=MSG141=MSG142=MSG143=MSG144=MSG145=MSG146=MSG147=MSG148=MSG149=MSG150=: netcons_nzmJQ +# key=1-2-13,468,514729715,-,ncfrag=967/1135;3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28-29-30-31-32-33-34-35-36-37-38-39-40-41-42-43-44-45-46-47-48-49-50-51-52-53-54-55-56-57-58-59-60- +function validate_fragmented_result() { + # Discard the netconsole headers, and assemble the full message + RCVMSG=$(extract_msg "${1}") + + # check for the main message + if ! echo "${RCVMSG}" | grep -q "${MSG}"; then + echo "Message body doesn't match." >&2 + echo "msg received=" "${RCVMSG}" >&2 + exit "${ksft_fail}" + fi + + # check userdata + if ! echo "${RCVMSG}" | grep -q "${USERDATA_VALUE}"; then + echo "message userdata doesn't match" >&2 + echo "msg received=" "${RCVMSG}" >&2 + exit "${ksft_fail}" + fi + # test passed. hooray +} + +# Check for basic system dependency and exit if not found +check_for_dependencies +# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5) +echo "6 5" > /proc/sys/kernel/printk +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup EXIT +# Create one namespace and two interfaces +set_network +# Create a dynamic target for netconsole +create_dynamic_target +# Set userdata "key" with the "value" value +set_user_data + + +# TEST 1: Send message and userdata. They will fragment +# ======= +MSG=$(printf -- 'MSG%.3s=' {1..150}) + +# Listen for netconsole port inside the namespace and destination interface +listen_port_and_save_to "${OUTPUT_FILE}" & +# Wait for socat to start and listen to the port. +wait_local_port_listen "${NAMESPACE}" "${PORT}" udp +# Send the message +echo "${MSG}: ${TARGET}" > /dev/kmsg +# Wait until socat saves the file to disk +busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" +# Check if the message was not corrupted +validate_fragmented_result "${OUTPUT_FILE}" + +# TEST 2: Test with smaller message, and without release appended +# ======= +MSG=$(printf -- 'FOOBAR%.3s=' {1..100}) +# Let's disable release and test again. +disable_release_append + +listen_port_and_save_to "${OUTPUT_FILE}" & +wait_local_port_listen "${NAMESPACE}" "${PORT}" udp +echo "${MSG}: ${TARGET}" > /dev/kmsg +busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" +validate_fragmented_result "${OUTPUT_FILE}" +exit "${ksft_pass}" --- base-commit: 0ad9617c78acbc71373fb341a6f75d4012b01d69 change-id: 20250129-netcons_frag_msgs-91506d136f50 Best regards, -- Breno Leitao <leitao(a)debian.org>

2 months, 3 weeks

2
4
0 0

[PATCH bpf-next v4 00/14] selftests/bpf: Migrate test_xdp_redirect_multi.sh to test_progs

by Bastien Curutchet (eBPF Foundation)

Hi all, This patch series continues the work to migrate the *.sh tests into prog_tests framework. test_xdp_redirect_multi.sh tests the XDP redirections done through bpf_redirect_map(). This is already partly covered by test_xdp_veth.c that already tests map redirections at XDP level. What isn't covered yet by test_xdp_veth is the use of the broadcast flags (BPF_F_BROADCAST or BPF_F_EXCLUDE_INGRESS) and XDP egress programs. Hence, this patch series add test cases to test_xdp_veth.c to get rid of the test_xdp_redirect_multi.sh: - PATCH 1 Add an helper to generate unique names - PATCH 2 to 9 rework test_xdp_veth to make it more generic and allow to configure different test cases - PATCH 10 adds test cases for 'classic' bpf_redirect_map() - PATCH 11 and 12 cover the broadcast flags - PATCH 13 covers the XDP egress programs - PATCH 14 removes test_xdp_redirect_multi.sh Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com> --- Changes in v4: - Remove the NO_IP #define - append_tid() takes string's size as input to ensure there is enough space to fit the thread ID at the end - Fix PATCH 12's commit log - Link to v3: https://lore.kernel.org/r/20250128-redirect-multi-v3-0-c1ce69997c01@bootlin… Changes in v3: - Add append_tid() helper and use unique names to allow parallel testing - Check create_network()'s return value through ASSERT_OK() - Remove check_ping() and unused defines - Change next_veth type (from string to int) - Link to v2: https://lore.kernel.org/r/20250121-redirect-multi-v2-0-fc9cacabc6b2@bootlin… Changes in v2: - Use serial_test_* to avoid conflict between tests - Link to v1: https://lore.kernel.org/r/20250121-redirect-multi-v1-0-b215e35ff505@bootlin… --- Bastien Curutchet (eBPF Foundation) (14): selftests/bpf: helpers: Add append_tid() selftests/bpf: test_xdp_veth: Remove unused defines selftests/bpf: test_xdp_veth: Remove unecessarry check_ping() selftests/bpf: test_xdp_veth: Use int to describe next veth selftests/bpf: test_xdp_veth: Split network configuration selftests/bpf: test_xdp_veth: Rename config[] selftests/bpf: test_xdp_veth: Add prog_config[] table selftests/bpf: test_xdp_veth: Add XDP flags to prog_configuration selftests/bpf: test_xdp_veth: Use unique names selftests/bpf: test_xdp_veth: Add new test cases for XDP flags selftests/bpf: Optionally select broadcasting flags selftests/bpf: test_xdp_veth: Add XDP broadcast redirection tests selftests/bpf: test_xdp_veth: Add XDP program on egress test selftests/bpf: Remove test_xdp_redirect_multi.sh tools/testing/selftests/bpf/Makefile | 2 - tools/testing/selftests/bpf/network_helpers.c | 17 + tools/testing/selftests/bpf/network_helpers.h | 12 + .../selftests/bpf/prog_tests/test_xdp_veth.c | 588 ++++++++++++++++----- .../testing/selftests/bpf/progs/xdp_redirect_map.c | 89 ++++ .../selftests/bpf/progs/xdp_redirect_multi_kern.c | 41 +- .../selftests/bpf/test_xdp_redirect_multi.sh | 214 -------- tools/testing/selftests/bpf/xdp_redirect_multi.c | 226 -------- 8 files changed, 615 insertions(+), 574 deletions(-) --- base-commit: 421ec9c8f46a25743870a8cbaff76de293752e00 change-id: 20250103-redirect-multi-245d6eafb5d1 Best regards, -- Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com>

2 months, 3 weeks

3
16
0 0

[PATCH v4 0/7] ptrace: introduce PTRACE_SET_SYSCALL_INFO API

by Dmitry V. Levin

PTRACE_SET_SYSCALL_INFO is a generic ptrace API that complements PTRACE_GET_SYSCALL_INFO by letting the ptracer modify details of system calls the tracee is blocked in. This API allows ptracers to obtain and modify system call details in a straightforward and architecture-agnostic way. Current implementation supports changing only those bits of system call information that are used by strace, namely, syscall number, syscall arguments, and syscall return value. Support of changing additional details returned by PTRACE_GET_SYSCALL_INFO, such as instruction pointer and stack pointer, could be added later if needed, by using struct ptrace_syscall_info.flags to specify the additional details that should be set. Currently, "flags" and "reserved" fields of struct ptrace_syscall_info must be initialized with zeroes; "arch", "instruction_pointer", and "stack_pointer" fields are ignored. PTRACE_SET_SYSCALL_INFO currently supports only PTRACE_SYSCALL_INFO_ENTRY, PTRACE_SYSCALL_INFO_EXIT, and PTRACE_SYSCALL_INFO_SECCOMP operations. Other operations could be added later if needed. Ideally, PTRACE_SET_SYSCALL_INFO should have been introduced along with PTRACE_GET_SYSCALL_INFO, but it didn't happen. The last straw that convinced me to implement PTRACE_SET_SYSCALL_INFO was apparent failure to provide an API of changing the first system call argument on riscv architecture [1]. ptrace(2) man page: long ptrace(enum __ptrace_request request, pid_t pid, void *addr, void *data); ... PTRACE_SET_SYSCALL_INFO Modify information about the system call that caused the stop. The "data" argument is a pointer to struct ptrace_syscall_info that specifies the system call information to be set. The "addr" argument should be set to sizeof(struct ptrace_syscall_info)). [1] https://lore.kernel.org/all/59505464-c84a-403d-972f-d4b2055eeaac@gmail.com/ Notes: v4: * Split out syscall_set_return_value() for hexagon into a separate patch * s390: Change the style of syscall_set_arguments() implementation as requested * Add more Reviewed-by * v3: https://lore.kernel.org/all/20250128091445.GA8257@strace.io/ v3: * powerpc: Submit syscall_set_return_value() fix for "sc" case separately * mips: Do not introduce erroneous argument truncation on mips n32, add a detailed description to the commit message of the mips_get_syscall_arg() change * ptrace: Add explicit padding to the end of struct ptrace_syscall_info, simplify obtaining of user ptrace_syscall_info, do not introduce PTRACE_SYSCALL_INFO_SIZE_VER0 * ptrace: Change the return type of ptrace_set_syscall_info_* functions from "unsigned long" to "int" * ptrace: Add -ERANGE check to ptrace_set_syscall_info_exit(), add comments to -ERANGE checks * ptrace: Update comments about supported syscall stops * selftests: Extend set_syscall_info test, fix for mips n32 * Add Tested-by and Reviewed-by v2: * Add patch to fix syscall_set_return_value() on powerpc * Add patch to fix mips_get_syscall_arg() on mips * Add syscall_set_return_value() implementation on hexagon * Add syscall_set_return_value() invocation to syscall_set_nr() on arm and arm64. * Fix syscall_set_nr() and mips_set_syscall_arg() on mips * Add a comment to syscall_set_nr() on arc, powerpc, s390, sh, and sparc * Remove redundant ptrace_syscall_info.op assignments in ptrace_get_syscall_info_* * Minor style tweaks in ptrace_get_syscall_info_op() * Remove syscall_set_return_value() invocation from ptrace_set_syscall_info_entry() * Skip syscall_set_arguments() invocation in case of syscall number -1 in ptrace_set_syscall_info_entry() * Split ptrace_syscall_info.reserved into ptrace_syscall_info.reserved and ptrace_syscall_info.flags * Use __kernel_ulong_t instead of unsigned long in set_syscall_info test v1: Dmitry V. Levin (7): mips: fix mips_get_syscall_arg() for o32 hexagon: add syscall_set_return_value() syscall.h: add syscall_set_arguments() syscall.h: introduce syscall_set_nr() ptrace_get_syscall_info: factor out ptrace_get_syscall_info_op ptrace: introduce PTRACE_SET_SYSCALL_INFO request selftests/ptrace: add a test case for PTRACE_SET_SYSCALL_INFO arch/arc/include/asm/syscall.h | 25 + arch/arm/include/asm/syscall.h | 37 ++ arch/arm64/include/asm/syscall.h | 29 + arch/csky/include/asm/syscall.h | 13 + arch/hexagon/include/asm/syscall.h | 21 + arch/loongarch/include/asm/syscall.h | 15 + arch/m68k/include/asm/syscall.h | 7 + arch/microblaze/include/asm/syscall.h | 7 + arch/mips/include/asm/syscall.h | 70 ++- arch/nios2/include/asm/syscall.h | 16 + arch/openrisc/include/asm/syscall.h | 13 + arch/parisc/include/asm/syscall.h | 19 + arch/powerpc/include/asm/syscall.h | 20 + arch/riscv/include/asm/syscall.h | 16 + arch/s390/include/asm/syscall.h | 21 + arch/sh/include/asm/syscall_32.h | 24 + arch/sparc/include/asm/syscall.h | 22 + arch/um/include/asm/syscall-generic.h | 19 + arch/x86/include/asm/syscall.h | 43 ++ arch/xtensa/include/asm/syscall.h | 18 + include/asm-generic/syscall.h | 30 + include/uapi/linux/ptrace.h | 7 +- kernel/ptrace.c | 179 +++++- tools/testing/selftests/ptrace/Makefile | 2 +- .../selftests/ptrace/set_syscall_info.c | 514 ++++++++++++++++++ 25 files changed, 1140 insertions(+), 47 deletions(-) create mode 100644 tools/testing/selftests/ptrace/set_syscall_info.c -- ldv

2 months, 3 weeks

2
2
0 0

[PATCH v3 net] udp: gso: do not drop small packets when PMTU reduces

by Yan Zhai

Commit 4094871db1d6 ("udp: only do GSO if # of segs > 1") avoided GSO for small packets. But the kernel currently dismisses GSO requests only after checking MTU/PMTU on gso_size. This means any packets, regardless of their payload sizes, could be dropped when PMTU becomes smaller than requested gso_size. We encountered this issue in production and it caused a reliability problem that new QUIC connection cannot be established before PMTU cache expired, while non GSO sockets still worked fine at the same time. Ideally, do not check any GSO related constraints when payload size is smaller than requested gso_size, and return EMSGSIZE instead of EINVAL on MTU/PMTU check failure to be more specific on the error cause. Fixes: 4094871db1d6 ("udp: only do GSO if # of segs > 1") Signed-off-by: Yan Zhai <yan(a)cloudflare.com> Suggested-by: Willem de Bruijn <willemdebruijn.kernel(a)gmail.com> --- v2->v3: simplify the code; adding two test cases v1->v2: add a missing MTU check when fall back to no GSO mode; Fixed up commit message to be more precise. v2: https://lore.kernel.org/netdev/Z5swit7ykNRbJFMS@debian.debian/T/#u v1: https://lore.kernel.org/all/Z5cgWh%2F6bRQm9vVU@debian.debian/ --- net/ipv4/udp.c | 4 ++-- net/ipv6/udp.c | 4 ++-- tools/testing/selftests/net/udpgso.c | 26 ++++++++++++++++++++++++++ 3 files changed, 30 insertions(+), 4 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index c472c9a57cf6..a9bb9ce5438e 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1141,9 +1141,9 @@ static int udp_send_skb(struct sk_buff *skb, struct flowi4 *fl4, const int hlen = skb_network_header_len(skb) + sizeof(struct udphdr); - if (hlen + cork->gso_size > cork->fragsize) { + if (hlen + min(datalen, cork->gso_size) > cork->fragsize) { kfree_skb(skb); - return -EINVAL; + return -EMSGSIZE; } if (datalen > cork->gso_size * UDP_MAX_SEGMENTS) { kfree_skb(skb); diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 6671daa67f4f..c6ea438b5c75 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1389,9 +1389,9 @@ static int udp_v6_send_skb(struct sk_buff *skb, struct flowi6 *fl6, const int hlen = skb_network_header_len(skb) + sizeof(struct udphdr); - if (hlen + cork->gso_size > cork->fragsize) { + if (hlen + min(datalen, cork->gso_size) > cork->fragsize) { kfree_skb(skb); - return -EINVAL; + return -EMSGSIZE; } if (datalen > cork->gso_size * UDP_MAX_SEGMENTS) { kfree_skb(skb); diff --git a/tools/testing/selftests/net/udpgso.c b/tools/testing/selftests/net/udpgso.c index 3f2fca02fec5..36ff28af4b19 100644 --- a/tools/testing/selftests/net/udpgso.c +++ b/tools/testing/selftests/net/udpgso.c @@ -102,6 +102,19 @@ struct testcase testcases_v4[] = { .gso_len = CONST_MSS_V4, .r_num_mss = 1, }, + { + /* datalen <= MSS < gso_len: will fall back to no GSO */ + .tlen = CONST_MSS_V4, + .gso_len = CONST_MSS_V4 + 1, + .r_num_mss = 0, + .r_len_last = CONST_MSS_V4, + }, + { + /* MSS < datalen < gso_len: fail */ + .tlen = CONST_MSS_V4 + 1, + .gso_len = CONST_MSS_V4 + 2, + .tfail = true, + }, { /* send a single MSS + 1B */ .tlen = CONST_MSS_V4 + 1, @@ -205,6 +218,19 @@ struct testcase testcases_v6[] = { .gso_len = CONST_MSS_V6, .r_num_mss = 1, }, + { + /* datalen <= MSS < gso_len: will fall back to no GSO */ + .tlen = CONST_MSS_V6, + .gso_len = CONST_MSS_V6 + 1, + .r_num_mss = 0, + .r_len_last = CONST_MSS_V6, + }, + { + /* MSS < datalen < gso_len: fail */ + .tlen = CONST_MSS_V6 + 1, + .gso_len = CONST_MSS_V6 + 2, + .tfail = true + }, { /* send a single MSS + 1B */ .tlen = CONST_MSS_V6 + 1, -- 2.30.2

2 months, 3 weeks

3
2
0 0

[PATCH] scanf: convert self-test to KUnit

by Tamir Duberstein

Convert the scanf() self-test to a KUnit test. In the interest of keeping the patch reasonably-sized this doesn't rename the file in accordance with usual kunit conventions nor does it refactor the tests into proper parameterized tests - it's all one big test case. Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- This is one of just 3 remaining "Test Module" kselftests (the others being bitmap and printf), the rest having been converted to KUnit. In addition to the enclosed patch, please consider this an RFC on the removal of the "Test Module" kselftest machinery. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 scanf --- arch/m68k/configs/amiga_defconfig | 1 - arch/m68k/configs/apollo_defconfig | 1 - arch/m68k/configs/atari_defconfig | 1 - arch/m68k/configs/bvme6000_defconfig | 1 - arch/m68k/configs/hp300_defconfig | 1 - arch/m68k/configs/mac_defconfig | 1 - arch/m68k/configs/multi_defconfig | 1 - arch/m68k/configs/mvme147_defconfig | 1 - arch/m68k/configs/mvme16x_defconfig | 1 - arch/m68k/configs/q40_defconfig | 1 - arch/m68k/configs/sun3_defconfig | 1 - arch/m68k/configs/sun3x_defconfig | 1 - arch/powerpc/configs/ppc64_defconfig | 1 - lib/Kconfig.debug | 20 +- lib/Makefile | 2 +- lib/test_scanf.c | 704 +++++++++++++++++------------------ tools/testing/selftests/lib/Makefile | 2 +- tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/scanf.sh | 4 - 19 files changed, 358 insertions(+), 388 deletions(-) diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index dbf2ea561c85..e85a4b3a9847 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -623,7 +623,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index b0fd199cc0a4..232b885cc26e 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -580,7 +580,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index bb5b2d3b6c10..228af5b4cd42 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -600,7 +600,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 8315a13bab73..cbc59aed3d97 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -572,7 +572,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 350370657e5f..8d3787b8fe6d 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -582,7 +582,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index f942b4755702..a68893d83361 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -599,7 +599,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index b1eaad02efab..9a17526cefd2 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -686,7 +686,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 6309a4442bb3..5cf2e2860044 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -572,7 +572,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 3feb0731f814..eb395749bc75 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -573,7 +573,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index ea04b1b0da7d..8891f12c2a18 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -589,7 +589,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index f52d9af92153..a49ff5330e5b 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -569,7 +569,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index f348447824da..3022ff492136 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -570,7 +570,6 @@ CONFIG_ASYNC_RAID6_TEST=m CONFIG_TEST_HEXDUMP=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 465eb96c755e..819387cbbe69 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -445,7 +445,6 @@ CONFIG_STRING_SELFTEST=m CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_TEST_UUID=m CONFIG_TEST_XARRAY=m diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 1af972a92d06..716c4ef857bb 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2427,6 +2427,23 @@ config ASYNC_RAID6_TEST config TEST_HEXDUMP tristate "Test functions located in the hexdump module at runtime" +config SCANF_KUNIT_TEST + tristate "KUnit test scanf() family of functions at runtime" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + help + Enable this option to test the scanf functions at boot. + + KUnit tests run during boot and output the results to the debug log + in TAP format (http://testanything.org/). Only useful for kernel devs + running the KUnit test harness, and not intended for inclusion into a + production build. + + For more information on KUnit and unit tests in general please refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + + If unsure, say N. + config STRING_KUNIT_TEST tristate "KUnit test string functions at runtime" if !KUNIT_ALL_TESTS depends on KUNIT @@ -2443,9 +2460,6 @@ config TEST_KSTRTOX config TEST_PRINTF tristate "Test printf() family of functions at runtime" -config TEST_SCANF - tristate "Test scanf() family of functions at runtime" - config TEST_BITMAP tristate "Test bitmap_*() family of functions at runtime" help diff --git a/lib/Makefile b/lib/Makefile index d5cfc7afbbb8..8f1cf22bd83b 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -52,6 +52,7 @@ obj-y += bcd.o sort.o parser.o debug_locks.o random32.o \ percpu-refcount.o rhashtable.o base64.o \ once.o refcount.o rcuref.o usercopy.o errseq.o bucket_locks.o \ generic-radix-tree.o bitmap-str.o +obj-$(CONFIG_SCANF_KUNIT_TEST) += test_scanf.o obj-$(CONFIG_STRING_KUNIT_TEST) += string_kunit.o obj-y += string_helpers.o obj-$(CONFIG_STRING_HELPERS_KUNIT_TEST) += string_helpers_kunit.o @@ -85,7 +86,6 @@ obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o obj-$(CONFIG_TEST_DYNAMIC_DEBUG) += test_dynamic_debug.o obj-$(CONFIG_TEST_PRINTF) += test_printf.o -obj-$(CONFIG_TEST_SCANF) += test_scanf.o obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o ifeq ($(CONFIG_CC_IS_CLANG)$(CONFIG_KASAN),yy) diff --git a/lib/test_scanf.c b/lib/test_scanf.c index 44f8508c9d88..70364ce20ec3 100644 --- a/lib/test_scanf.c +++ b/lib/test_scanf.c @@ -5,8 +5,8 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <kunit/test.h> #include <linux/bitops.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/overflow.h> @@ -15,148 +15,123 @@ #include <linux/slab.h> #include <linux/string.h> -#include "../tools/testing/selftests/kselftest_module.h" - #define BUF_SIZE 1024 -KSTM_MODULE_GLOBALS(); -static char *test_buffer __initdata; -static char *fmt_buffer __initdata; -static struct rnd_state rnd_state __initdata; +static char *test_buffer; +static char *fmt_buffer; +static struct rnd_state rnd_state; -typedef int (*check_fn)(const void *check_data, const char *string, +typedef void (*check_fn)(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap); -static void __scanf(4, 6) __init -_test(check_fn fn, const void *check_data, const char *string, const char *fmt, +static void __scanf(5, 7) +_test(struct kunit *test, check_fn fn, const void *check_data, const char *string, const char *fmt, int n_args, ...) { va_list ap, ap_copy; - int ret; - - total_tests++; va_start(ap, n_args); va_copy(ap_copy, ap); - ret = vsscanf(string, fmt, ap_copy); + KUNIT_EXPECT_EQ_MSG(test, vsscanf(string, fmt, ap_copy), n_args, + "vsscanf(\"%s\", \"%s\", ...)", string, fmt); va_end(ap_copy); - if (ret != n_args) { - pr_warn("vsscanf(\"%s\", \"%s\", ...) returned %d expected %d\n", - string, fmt, ret, n_args); - goto fail; - } - - ret = (*fn)(check_data, string, fmt, n_args, ap); - if (ret) - goto fail; - - va_end(ap); - - return; - -fail: - failed_tests++; + (*fn)(test, check_data, string, fmt, n_args, ap); va_end(ap); } -#define _check_numbers_template(arg_fmt, expect, str, fmt, n_args, ap) \ +#define _check_numbers_template(test, arg_fmt, expect, str, fmt, n_args, ap) \ do { \ pr_debug("\"%s\", \"%s\" ->\n", str, fmt); \ for (; n_args > 0; n_args--, expect++) { \ typeof(*expect) got = *va_arg(ap, typeof(expect)); \ pr_debug("\t" arg_fmt "\n", got); \ - if (got != *expect) { \ - pr_warn("vsscanf(\"%s\", \"%s\", ...) expected " arg_fmt " got " arg_fmt "\n", \ - str, fmt, *expect, got); \ - return 1; \ - } \ + KUNIT_EXPECT_EQ_MSG(test, got, *expect, "vsscanf(\"%s\", \"%s\", ...)", str, fmt); \ } \ - return 0; \ } while (0) -static int __init check_ull(const void *check_data, const char *string, +static void check_ull(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const unsigned long long *pval = check_data; - _check_numbers_template("%llu", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%llu", pval, string, fmt, n_args, ap); } -static int __init check_ll(const void *check_data, const char *string, +static void check_ll(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const long long *pval = check_data; - _check_numbers_template("%lld", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%lld", pval, string, fmt, n_args, ap); } -static int __init check_ulong(const void *check_data, const char *string, +static void check_ulong(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const unsigned long *pval = check_data; - _check_numbers_template("%lu", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%lu", pval, string, fmt, n_args, ap); } -static int __init check_long(const void *check_data, const char *string, +static void check_long(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const long *pval = check_data; - _check_numbers_template("%ld", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%ld", pval, string, fmt, n_args, ap); } -static int __init check_uint(const void *check_data, const char *string, +static void check_uint(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const unsigned int *pval = check_data; - _check_numbers_template("%u", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%u", pval, string, fmt, n_args, ap); } -static int __init check_int(const void *check_data, const char *string, +static void check_int(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const int *pval = check_data; - _check_numbers_template("%d", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%d", pval, string, fmt, n_args, ap); } -static int __init check_ushort(const void *check_data, const char *string, +static void check_ushort(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const unsigned short *pval = check_data; - _check_numbers_template("%hu", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%hu", pval, string, fmt, n_args, ap); } -static int __init check_short(const void *check_data, const char *string, +static void check_short(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const short *pval = check_data; - _check_numbers_template("%hd", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%hd", pval, string, fmt, n_args, ap); } -static int __init check_uchar(const void *check_data, const char *string, +static void check_uchar(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const unsigned char *pval = check_data; - _check_numbers_template("%hhu", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%hhu", pval, string, fmt, n_args, ap); } -static int __init check_char(const void *check_data, const char *string, +static void check_char(struct kunit *test, const void *check_data, const char *string, const char *fmt, int n_args, va_list ap) { const signed char *pval = check_data; - _check_numbers_template("%hhd", pval, string, fmt, n_args, ap); + _check_numbers_template(test, "%hhd", pval, string, fmt, n_args, ap); } /* Selection of interesting numbers to test, copied from test-kstrtox.c */ -static const unsigned long long numbers[] __initconst = { +static const unsigned long long numbers[] = { 0x0ULL, 0x1ULL, 0x7fULL, @@ -190,76 +165,76 @@ static const unsigned long long numbers[] __initconst = { : ((unsigned long long)(val) <= type_max(T))) -#define test_one_number(T, gen_fmt, scan_fmt, val, fn) \ -do { \ - const T expect_val = (T)(val); \ - T result = ~expect_val; /* should be overwritten */ \ - \ - snprintf(test_buffer, BUF_SIZE, gen_fmt, expect_val); \ - _test(fn, &expect_val, test_buffer, "%" scan_fmt, 1, &result); \ +#define test_one_number(test, T, gen_fmt, scan_fmt, val, fn) \ +do { \ + const T expect_val = (T)(val); \ + T result = ~expect_val; /* should be overwritten */ \ + \ + snprintf(test_buffer, BUF_SIZE, gen_fmt, expect_val); \ + _test(test, fn, &expect_val, test_buffer, "%" scan_fmt, 1, &result); \ } while (0) -#define simple_numbers_loop(T, gen_fmt, scan_fmt, fn) \ +#define simple_numbers_loop(test, T, gen_fmt, scan_fmt, fn) \ do { \ int i; \ \ for (i = 0; i < ARRAY_SIZE(numbers); i++) { \ if (value_representable_in_type(T, numbers[i])) \ - test_one_number(T, gen_fmt, scan_fmt, \ + test_one_number(test, T, gen_fmt, scan_fmt, \ numbers[i], fn); \ \ if (value_representable_in_type(T, -numbers[i])) \ - test_one_number(T, gen_fmt, scan_fmt, \ + test_one_number(test, T, gen_fmt, scan_fmt, \ -numbers[i], fn); \ } \ } while (0) -static void __init numbers_simple(void) -{ - simple_numbers_loop(unsigned long long, "%llu", "llu", check_ull); - simple_numbers_loop(long long, "%lld", "lld", check_ll); - simple_numbers_loop(long long, "%lld", "lli", check_ll); - simple_numbers_loop(unsigned long long, "%llx", "llx", check_ull); - simple_numbers_loop(long long, "%llx", "llx", check_ll); - simple_numbers_loop(long long, "0x%llx", "lli", check_ll); - simple_numbers_loop(unsigned long long, "0x%llx", "llx", check_ull); - simple_numbers_loop(long long, "0x%llx", "llx", check_ll); - - simple_numbers_loop(unsigned long, "%lu", "lu", check_ulong); - simple_numbers_loop(long, "%ld", "ld", check_long); - simple_numbers_loop(long, "%ld", "li", check_long); - simple_numbers_loop(unsigned long, "%lx", "lx", check_ulong); - simple_numbers_loop(long, "%lx", "lx", check_long); - simple_numbers_loop(long, "0x%lx", "li", check_long); - simple_numbers_loop(unsigned long, "0x%lx", "lx", check_ulong); - simple_numbers_loop(long, "0x%lx", "lx", check_long); - - simple_numbers_loop(unsigned int, "%u", "u", check_uint); - simple_numbers_loop(int, "%d", "d", check_int); - simple_numbers_loop(int, "%d", "i", check_int); - simple_numbers_loop(unsigned int, "%x", "x", check_uint); - simple_numbers_loop(int, "%x", "x", check_int); - simple_numbers_loop(int, "0x%x", "i", check_int); - simple_numbers_loop(unsigned int, "0x%x", "x", check_uint); - simple_numbers_loop(int, "0x%x", "x", check_int); - - simple_numbers_loop(unsigned short, "%hu", "hu", check_ushort); - simple_numbers_loop(short, "%hd", "hd", check_short); - simple_numbers_loop(short, "%hd", "hi", check_short); - simple_numbers_loop(unsigned short, "%hx", "hx", check_ushort); - simple_numbers_loop(short, "%hx", "hx", check_short); - simple_numbers_loop(short, "0x%hx", "hi", check_short); - simple_numbers_loop(unsigned short, "0x%hx", "hx", check_ushort); - simple_numbers_loop(short, "0x%hx", "hx", check_short); - - simple_numbers_loop(unsigned char, "%hhu", "hhu", check_uchar); - simple_numbers_loop(signed char, "%hhd", "hhd", check_char); - simple_numbers_loop(signed char, "%hhd", "hhi", check_char); - simple_numbers_loop(unsigned char, "%hhx", "hhx", check_uchar); - simple_numbers_loop(signed char, "%hhx", "hhx", check_char); - simple_numbers_loop(signed char, "0x%hhx", "hhi", check_char); - simple_numbers_loop(unsigned char, "0x%hhx", "hhx", check_uchar); - simple_numbers_loop(signed char, "0x%hhx", "hhx", check_char); +static void numbers_simple(struct kunit *test) +{ + simple_numbers_loop(test, unsigned long long, "%llu", "llu", check_ull); + simple_numbers_loop(test, long long, "%lld", "lld", check_ll); + simple_numbers_loop(test, long long, "%lld", "lli", check_ll); + simple_numbers_loop(test, unsigned long long, "%llx", "llx", check_ull); + simple_numbers_loop(test, long long, "%llx", "llx", check_ll); + simple_numbers_loop(test, long long, "0x%llx", "lli", check_ll); + simple_numbers_loop(test, unsigned long long, "0x%llx", "llx", check_ull); + simple_numbers_loop(test, long long, "0x%llx", "llx", check_ll); + + simple_numbers_loop(test, unsigned long, "%lu", "lu", check_ulong); + simple_numbers_loop(test, long, "%ld", "ld", check_long); + simple_numbers_loop(test, long, "%ld", "li", check_long); + simple_numbers_loop(test, unsigned long, "%lx", "lx", check_ulong); + simple_numbers_loop(test, long, "%lx", "lx", check_long); + simple_numbers_loop(test, long, "0x%lx", "li", check_long); + simple_numbers_loop(test, unsigned long, "0x%lx", "lx", check_ulong); + simple_numbers_loop(test, long, "0x%lx", "lx", check_long); + + simple_numbers_loop(test, unsigned int, "%u", "u", check_uint); + simple_numbers_loop(test, int, "%d", "d", check_int); + simple_numbers_loop(test, int, "%d", "i", check_int); + simple_numbers_loop(test, unsigned int, "%x", "x", check_uint); + simple_numbers_loop(test, int, "%x", "x", check_int); + simple_numbers_loop(test, int, "0x%x", "i", check_int); + simple_numbers_loop(test, unsigned int, "0x%x", "x", check_uint); + simple_numbers_loop(test, int, "0x%x", "x", check_int); + + simple_numbers_loop(test, unsigned short, "%hu", "hu", check_ushort); + simple_numbers_loop(test, short, "%hd", "hd", check_short); + simple_numbers_loop(test, short, "%hd", "hi", check_short); + simple_numbers_loop(test, unsigned short, "%hx", "hx", check_ushort); + simple_numbers_loop(test, short, "%hx", "hx", check_short); + simple_numbers_loop(test, short, "0x%hx", "hi", check_short); + simple_numbers_loop(test, unsigned short, "0x%hx", "hx", check_ushort); + simple_numbers_loop(test, short, "0x%hx", "hx", check_short); + + simple_numbers_loop(test, unsigned char, "%hhu", "hhu", check_uchar); + simple_numbers_loop(test, signed char, "%hhd", "hhd", check_char); + simple_numbers_loop(test, signed char, "%hhd", "hhi", check_char); + simple_numbers_loop(test, unsigned char, "%hhx", "hhx", check_uchar); + simple_numbers_loop(test, signed char, "%hhx", "hhx", check_char); + simple_numbers_loop(test, signed char, "0x%hhx", "hhi", check_char); + simple_numbers_loop(test, unsigned char, "0x%hhx", "hhx", check_uchar); + simple_numbers_loop(test, signed char, "0x%hhx", "hhx", check_char); } /* @@ -267,14 +242,14 @@ static void __init numbers_simple(void) * the raw prandom*() functions (Not mathematically rigorous!!). * Variabilty of length and value is more important than perfect randomness. */ -static u32 __init next_test_random(u32 max_bits) +static u32 next_test_random(u32 max_bits) { u32 n_bits = hweight32(prandom_u32_state(&rnd_state)) % (max_bits + 1); return prandom_u32_state(&rnd_state) & GENMASK(n_bits, 0); } -static unsigned long long __init next_test_random_ull(void) +static unsigned long long next_test_random_ull(void) { u32 rand1 = prandom_u32_state(&rnd_state); u32 n_bits = (hweight32(rand1) * 3) % 64; @@ -311,7 +286,7 @@ do { \ * updating buf_pos and returning the number of characters appended. * On error buf_pos is not changed and return value is 0. */ -static int __init __printf(4, 5) +static int __printf(4, 5) append_fmt(char *buf, int *buf_pos, int buf_len, const char *val_fmt, ...) { va_list ap; @@ -333,7 +308,7 @@ append_fmt(char *buf, int *buf_pos, int buf_len, const char *val_fmt, ...) * Convenience function to append the field delimiter string * to both the value string and format string buffers. */ -static void __init append_delim(char *str_buf, int *str_buf_pos, int str_buf_len, +static void append_delim(char *str_buf, int *str_buf_pos, int str_buf_len, char *fmt_buf, int *fmt_buf_pos, int fmt_buf_len, const char *delim_str) { @@ -341,15 +316,15 @@ static void __init append_delim(char *str_buf, int *str_buf_pos, int str_buf_len append_fmt(fmt_buf, fmt_buf_pos, fmt_buf_len, delim_str); } -#define test_array_8(fn, check_data, string, fmt, arr) \ +#define test_array_8(test, fn, check_data, string, fmt, arr) \ do { \ BUILD_BUG_ON(ARRAY_SIZE(arr) != 8); \ - _test(fn, check_data, string, fmt, 8, \ + _test(test, fn, check_data, string, fmt, 8, \ &(arr)[0], &(arr)[1], &(arr)[2], &(arr)[3], \ &(arr)[4], &(arr)[5], &(arr)[6], &(arr)[7]); \ } while (0) -#define numbers_list_8(T, gen_fmt, field_sep, scan_fmt, fn) \ +#define numbers_list_8(test, T, gen_fmt, field_sep, scan_fmt, fn) \ do { \ int i, pos = 0, fmt_pos = 0; \ T expect[8], result[8]; \ @@ -366,18 +341,18 @@ do { \ append_fmt(fmt_buffer, &fmt_pos, BUF_SIZE, "%%%s", scan_fmt); \ } \ \ - test_array_8(fn, expect, test_buffer, fmt_buffer, result); \ + test_array_8(test, fn, expect, test_buffer, fmt_buffer, result); \ } while (0) -#define numbers_list_fix_width(T, gen_fmt, field_sep, width, scan_fmt, fn) \ +#define numbers_list_fix_width(test, T, gen_fmt, field_sep, width, scan_fmt, fn)\ do { \ char full_fmt[16]; \ \ snprintf(full_fmt, sizeof(full_fmt), "%u%s", width, scan_fmt); \ - numbers_list_8(T, gen_fmt, field_sep, full_fmt, fn); \ + numbers_list_8(test, T, gen_fmt, field_sep, full_fmt, fn); \ } while (0) -#define numbers_list_val_width(T, gen_fmt, field_sep, scan_fmt, fn) \ +#define numbers_list_val_width(test, T, gen_fmt, field_sep, scan_fmt, fn) \ do { \ int i, val_len, pos = 0, fmt_pos = 0; \ T expect[8], result[8]; \ @@ -395,201 +370,201 @@ do { \ "%%%u%s", val_len, scan_fmt); \ } \ \ - test_array_8(fn, expect, test_buffer, fmt_buffer, result); \ + test_array_8(test, fn, expect, test_buffer, fmt_buffer, result); \ } while (0) -static void __init numbers_list_ll(const char *delim) +static void numbers_list_ll(struct kunit *test, const char *delim) { - numbers_list_8(unsigned long long, "%llu", delim, "llu", check_ull); - numbers_list_8(long long, "%lld", delim, "lld", check_ll); - numbers_list_8(long long, "%lld", delim, "lli", check_ll); - numbers_list_8(unsigned long long, "%llx", delim, "llx", check_ull); - numbers_list_8(unsigned long long, "0x%llx", delim, "llx", check_ull); - numbers_list_8(long long, "0x%llx", delim, "lli", check_ll); + numbers_list_8(test, unsigned long long, "%llu", delim, "llu", check_ull); + numbers_list_8(test, long long, "%lld", delim, "lld", check_ll); + numbers_list_8(test, long long, "%lld", delim, "lli", check_ll); + numbers_list_8(test, unsigned long long, "%llx", delim, "llx", check_ull); + numbers_list_8(test, unsigned long long, "0x%llx", delim, "llx", check_ull); + numbers_list_8(test, long long, "0x%llx", delim, "lli", check_ll); } -static void __init numbers_list_l(const char *delim) +static void numbers_list_l(struct kunit *test, const char *delim) { - numbers_list_8(unsigned long, "%lu", delim, "lu", check_ulong); - numbers_list_8(long, "%ld", delim, "ld", check_long); - numbers_list_8(long, "%ld", delim, "li", check_long); - numbers_list_8(unsigned long, "%lx", delim, "lx", check_ulong); - numbers_list_8(unsigned long, "0x%lx", delim, "lx", check_ulong); - numbers_list_8(long, "0x%lx", delim, "li", check_long); + numbers_list_8(test, unsigned long, "%lu", delim, "lu", check_ulong); + numbers_list_8(test, long, "%ld", delim, "ld", check_long); + numbers_list_8(test, long, "%ld", delim, "li", check_long); + numbers_list_8(test, unsigned long, "%lx", delim, "lx", check_ulong); + numbers_list_8(test, unsigned long, "0x%lx", delim, "lx", check_ulong); + numbers_list_8(test, long, "0x%lx", delim, "li", check_long); } -static void __init numbers_list_d(const char *delim) +static void numbers_list_d(struct kunit *test, const char *delim) { - numbers_list_8(unsigned int, "%u", delim, "u", check_uint); - numbers_list_8(int, "%d", delim, "d", check_int); - numbers_list_8(int, "%d", delim, "i", check_int); - numbers_list_8(unsigned int, "%x", delim, "x", check_uint); - numbers_list_8(unsigned int, "0x%x", delim, "x", check_uint); - numbers_list_8(int, "0x%x", delim, "i", check_int); + numbers_list_8(test, unsigned int, "%u", delim, "u", check_uint); + numbers_list_8(test, int, "%d", delim, "d", check_int); + numbers_list_8(test, int, "%d", delim, "i", check_int); + numbers_list_8(test, unsigned int, "%x", delim, "x", check_uint); + numbers_list_8(test, unsigned int, "0x%x", delim, "x", check_uint); + numbers_list_8(test, int, "0x%x", delim, "i", check_int); } -static void __init numbers_list_h(const char *delim) +static void numbers_list_h(struct kunit *test, const char *delim) { - numbers_list_8(unsigned short, "%hu", delim, "hu", check_ushort); - numbers_list_8(short, "%hd", delim, "hd", check_short); - numbers_list_8(short, "%hd", delim, "hi", check_short); - numbers_list_8(unsigned short, "%hx", delim, "hx", check_ushort); - numbers_list_8(unsigned short, "0x%hx", delim, "hx", check_ushort); - numbers_list_8(short, "0x%hx", delim, "hi", check_short); + numbers_list_8(test, unsigned short, "%hu", delim, "hu", check_ushort); + numbers_list_8(test, short, "%hd", delim, "hd", check_short); + numbers_list_8(test, short, "%hd", delim, "hi", check_short); + numbers_list_8(test, unsigned short, "%hx", delim, "hx", check_ushort); + numbers_list_8(test, unsigned short, "0x%hx", delim, "hx", check_ushort); + numbers_list_8(test, short, "0x%hx", delim, "hi", check_short); } -static void __init numbers_list_hh(const char *delim) +static void numbers_list_hh(struct kunit *test, const char *delim) { - numbers_list_8(unsigned char, "%hhu", delim, "hhu", check_uchar); - numbers_list_8(signed char, "%hhd", delim, "hhd", check_char); - numbers_list_8(signed char, "%hhd", delim, "hhi", check_char); - numbers_list_8(unsigned char, "%hhx", delim, "hhx", check_uchar); - numbers_list_8(unsigned char, "0x%hhx", delim, "hhx", check_uchar); - numbers_list_8(signed char, "0x%hhx", delim, "hhi", check_char); + numbers_list_8(test, unsigned char, "%hhu", delim, "hhu", check_uchar); + numbers_list_8(test, signed char, "%hhd", delim, "hhd", check_char); + numbers_list_8(test, signed char, "%hhd", delim, "hhi", check_char); + numbers_list_8(test, unsigned char, "%hhx", delim, "hhx", check_uchar); + numbers_list_8(test, unsigned char, "0x%hhx", delim, "hhx", check_uchar); + numbers_list_8(test, signed char, "0x%hhx", delim, "hhi", check_char); } -static void __init numbers_list(const char *delim) +static void numbers_list(struct kunit *test, const char *delim) { - numbers_list_ll(delim); - numbers_list_l(delim); - numbers_list_d(delim); - numbers_list_h(delim); - numbers_list_hh(delim); + numbers_list_ll(test, delim); + numbers_list_l(test, delim); + numbers_list_d(test, delim); + numbers_list_h(test, delim); + numbers_list_hh(test, delim); } -static void __init numbers_list_field_width_ll(const char *delim) +static void numbers_list_field_width_ll(struct kunit *test, const char *delim) { - numbers_list_fix_width(unsigned long long, "%llu", delim, 20, "llu", check_ull); - numbers_list_fix_width(long long, "%lld", delim, 20, "lld", check_ll); - numbers_list_fix_width(long long, "%lld", delim, 20, "lli", check_ll); - numbers_list_fix_width(unsigned long long, "%llx", delim, 16, "llx", check_ull); - numbers_list_fix_width(unsigned long long, "0x%llx", delim, 18, "llx", check_ull); - numbers_list_fix_width(long long, "0x%llx", delim, 18, "lli", check_ll); + numbers_list_fix_width(test, unsigned long long, "%llu", delim, 20, "llu", check_ull); + numbers_list_fix_width(test, long long, "%lld", delim, 20, "lld", check_ll); + numbers_list_fix_width(test, long long, "%lld", delim, 20, "lli", check_ll); + numbers_list_fix_width(test, unsigned long long, "%llx", delim, 16, "llx", check_ull); + numbers_list_fix_width(test, unsigned long long, "0x%llx", delim, 18, "llx", check_ull); + numbers_list_fix_width(test, long long, "0x%llx", delim, 18, "lli", check_ll); } -static void __init numbers_list_field_width_l(const char *delim) +static void numbers_list_field_width_l(struct kunit *test, const char *delim) { #if BITS_PER_LONG == 64 - numbers_list_fix_width(unsigned long, "%lu", delim, 20, "lu", check_ulong); - numbers_list_fix_width(long, "%ld", delim, 20, "ld", check_long); - numbers_list_fix_width(long, "%ld", delim, 20, "li", check_long); - numbers_list_fix_width(unsigned long, "%lx", delim, 16, "lx", check_ulong); - numbers_list_fix_width(unsigned long, "0x%lx", delim, 18, "lx", check_ulong); - numbers_list_fix_width(long, "0x%lx", delim, 18, "li", check_long); + numbers_list_fix_width(test, unsigned long, "%lu", delim, 20, "lu", check_ulong); + numbers_list_fix_width(test, long, "%ld", delim, 20, "ld", check_long); + numbers_list_fix_width(test, long, "%ld", delim, 20, "li", check_long); + numbers_list_fix_width(test, unsigned long, "%lx", delim, 16, "lx", check_ulong); + numbers_list_fix_width(test, unsigned long, "0x%lx", delim, 18, "lx", check_ulong); + numbers_list_fix_width(test, long, "0x%lx", delim, 18, "li", check_long); #else - numbers_list_fix_width(unsigned long, "%lu", delim, 10, "lu", check_ulong); - numbers_list_fix_width(long, "%ld", delim, 11, "ld", check_long); - numbers_list_fix_width(long, "%ld", delim, 11, "li", check_long); - numbers_list_fix_width(unsigned long, "%lx", delim, 8, "lx", check_ulong); - numbers_list_fix_width(unsigned long, "0x%lx", delim, 10, "lx", check_ulong); - numbers_list_fix_width(long, "0x%lx", delim, 10, "li", check_long); + numbers_list_fix_width(test, unsigned long, "%lu", delim, 10, "lu", check_ulong); + numbers_list_fix_width(test, long, "%ld", delim, 11, "ld", check_long); + numbers_list_fix_width(test, long, "%ld", delim, 11, "li", check_long); + numbers_list_fix_width(test, unsigned long, "%lx", delim, 8, "lx", check_ulong); + numbers_list_fix_width(test, unsigned long, "0x%lx", delim, 10, "lx", check_ulong); + numbers_list_fix_width(test, long, "0x%lx", delim, 10, "li", check_long); #endif } -static void __init numbers_list_field_width_d(const char *delim) +static void numbers_list_field_width_d(struct kunit *test, const char *delim) { - numbers_list_fix_width(unsigned int, "%u", delim, 10, "u", check_uint); - numbers_list_fix_width(int, "%d", delim, 11, "d", check_int); - numbers_list_fix_width(int, "%d", delim, 11, "i", check_int); - numbers_list_fix_width(unsigned int, "%x", delim, 8, "x", check_uint); - numbers_list_fix_width(unsigned int, "0x%x", delim, 10, "x", check_uint); - numbers_list_fix_width(int, "0x%x", delim, 10, "i", check_int); + numbers_list_fix_width(test, unsigned int, "%u", delim, 10, "u", check_uint); + numbers_list_fix_width(test, int, "%d", delim, 11, "d", check_int); + numbers_list_fix_width(test, int, "%d", delim, 11, "i", check_int); + numbers_list_fix_width(test, unsigned int, "%x", delim, 8, "x", check_uint); + numbers_list_fix_width(test, unsigned int, "0x%x", delim, 10, "x", check_uint); + numbers_list_fix_width(test, int, "0x%x", delim, 10, "i", check_int); } -static void __init numbers_list_field_width_h(const char *delim) +static void numbers_list_field_width_h(struct kunit *test, const char *delim) { - numbers_list_fix_width(unsigned short, "%hu", delim, 5, "hu", check_ushort); - numbers_list_fix_width(short, "%hd", delim, 6, "hd", check_short); - numbers_list_fix_width(short, "%hd", delim, 6, "hi", check_short); - numbers_list_fix_width(unsigned short, "%hx", delim, 4, "hx", check_ushort); - numbers_list_fix_width(unsigned short, "0x%hx", delim, 6, "hx", check_ushort); - numbers_list_fix_width(short, "0x%hx", delim, 6, "hi", check_short); + numbers_list_fix_width(test, unsigned short, "%hu", delim, 5, "hu", check_ushort); + numbers_list_fix_width(test, short, "%hd", delim, 6, "hd", check_short); + numbers_list_fix_width(test, short, "%hd", delim, 6, "hi", check_short); + numbers_list_fix_width(test, unsigned short, "%hx", delim, 4, "hx", check_ushort); + numbers_list_fix_width(test, unsigned short, "0x%hx", delim, 6, "hx", check_ushort); + numbers_list_fix_width(test, short, "0x%hx", delim, 6, "hi", check_short); } -static void __init numbers_list_field_width_hh(const char *delim) +static void numbers_list_field_width_hh(struct kunit *test, const char *delim) { - numbers_list_fix_width(unsigned char, "%hhu", delim, 3, "hhu", check_uchar); - numbers_list_fix_width(signed char, "%hhd", delim, 4, "hhd", check_char); - numbers_list_fix_width(signed char, "%hhd", delim, 4, "hhi", check_char); - numbers_list_fix_width(unsigned char, "%hhx", delim, 2, "hhx", check_uchar); - numbers_list_fix_width(unsigned char, "0x%hhx", delim, 4, "hhx", check_uchar); - numbers_list_fix_width(signed char, "0x%hhx", delim, 4, "hhi", check_char); + numbers_list_fix_width(test, unsigned char, "%hhu", delim, 3, "hhu", check_uchar); + numbers_list_fix_width(test, signed char, "%hhd", delim, 4, "hhd", check_char); + numbers_list_fix_width(test, signed char, "%hhd", delim, 4, "hhi", check_char); + numbers_list_fix_width(test, unsigned char, "%hhx", delim, 2, "hhx", check_uchar); + numbers_list_fix_width(test, unsigned char, "0x%hhx", delim, 4, "hhx", check_uchar); + numbers_list_fix_width(test, signed char, "0x%hhx", delim, 4, "hhi", check_char); } /* * List of numbers separated by delim. Each field width specifier is the * maximum possible digits for the given type and base. */ -static void __init numbers_list_field_width_typemax(const char *delim) +static void numbers_list_field_width_typemax(struct kunit *test, const char *delim) { - numbers_list_field_width_ll(delim); - numbers_list_field_width_l(delim); - numbers_list_field_width_d(delim); - numbers_list_field_width_h(delim); - numbers_list_field_width_hh(delim); + numbers_list_field_width_ll(test, delim); + numbers_list_field_width_l(test, delim); + numbers_list_field_width_d(test, delim); + numbers_list_field_width_h(test, delim); + numbers_list_field_width_hh(test, delim); } -static void __init numbers_list_field_width_val_ll(const char *delim) +static void numbers_list_field_width_val_ll(struct kunit *test, const char *delim) { - numbers_list_val_width(unsigned long long, "%llu", delim, "llu", check_ull); - numbers_list_val_width(long long, "%lld", delim, "lld", check_ll); - numbers_list_val_width(long long, "%lld", delim, "lli", check_ll); - numbers_list_val_width(unsigned long long, "%llx", delim, "llx", check_ull); - numbers_list_val_width(unsigned long long, "0x%llx", delim, "llx", check_ull); - numbers_list_val_width(long long, "0x%llx", delim, "lli", check_ll); + numbers_list_val_width(test, unsigned long long, "%llu", delim, "llu", check_ull); + numbers_list_val_width(test, long long, "%lld", delim, "lld", check_ll); + numbers_list_val_width(test, long long, "%lld", delim, "lli", check_ll); + numbers_list_val_width(test, unsigned long long, "%llx", delim, "llx", check_ull); + numbers_list_val_width(test, unsigned long long, "0x%llx", delim, "llx", check_ull); + numbers_list_val_width(test, long long, "0x%llx", delim, "lli", check_ll); } -static void __init numbers_list_field_width_val_l(const char *delim) +static void numbers_list_field_width_val_l(struct kunit *test, const char *delim) { - numbers_list_val_width(unsigned long, "%lu", delim, "lu", check_ulong); - numbers_list_val_width(long, "%ld", delim, "ld", check_long); - numbers_list_val_width(long, "%ld", delim, "li", check_long); - numbers_list_val_width(unsigned long, "%lx", delim, "lx", check_ulong); - numbers_list_val_width(unsigned long, "0x%lx", delim, "lx", check_ulong); - numbers_list_val_width(long, "0x%lx", delim, "li", check_long); + numbers_list_val_width(test, unsigned long, "%lu", delim, "lu", check_ulong); + numbers_list_val_width(test, long, "%ld", delim, "ld", check_long); + numbers_list_val_width(test, long, "%ld", delim, "li", check_long); + numbers_list_val_width(test, unsigned long, "%lx", delim, "lx", check_ulong); + numbers_list_val_width(test, unsigned long, "0x%lx", delim, "lx", check_ulong); + numbers_list_val_width(test, long, "0x%lx", delim, "li", check_long); } -static void __init numbers_list_field_width_val_d(const char *delim) +static void numbers_list_field_width_val_d(struct kunit *test, const char *delim) { - numbers_list_val_width(unsigned int, "%u", delim, "u", check_uint); - numbers_list_val_width(int, "%d", delim, "d", check_int); - numbers_list_val_width(int, "%d", delim, "i", check_int); - numbers_list_val_width(unsigned int, "%x", delim, "x", check_uint); - numbers_list_val_width(unsigned int, "0x%x", delim, "x", check_uint); - numbers_list_val_width(int, "0x%x", delim, "i", check_int); + numbers_list_val_width(test, unsigned int, "%u", delim, "u", check_uint); + numbers_list_val_width(test, int, "%d", delim, "d", check_int); + numbers_list_val_width(test, int, "%d", delim, "i", check_int); + numbers_list_val_width(test, unsigned int, "%x", delim, "x", check_uint); + numbers_list_val_width(test, unsigned int, "0x%x", delim, "x", check_uint); + numbers_list_val_width(test, int, "0x%x", delim, "i", check_int); } -static void __init numbers_list_field_width_val_h(const char *delim) +static void numbers_list_field_width_val_h(struct kunit *test, const char *delim) { - numbers_list_val_width(unsigned short, "%hu", delim, "hu", check_ushort); - numbers_list_val_width(short, "%hd", delim, "hd", check_short); - numbers_list_val_width(short, "%hd", delim, "hi", check_short); - numbers_list_val_width(unsigned short, "%hx", delim, "hx", check_ushort); - numbers_list_val_width(unsigned short, "0x%hx", delim, "hx", check_ushort); - numbers_list_val_width(short, "0x%hx", delim, "hi", check_short); + numbers_list_val_width(test, unsigned short, "%hu", delim, "hu", check_ushort); + numbers_list_val_width(test, short, "%hd", delim, "hd", check_short); + numbers_list_val_width(test, short, "%hd", delim, "hi", check_short); + numbers_list_val_width(test, unsigned short, "%hx", delim, "hx", check_ushort); + numbers_list_val_width(test, unsigned short, "0x%hx", delim, "hx", check_ushort); + numbers_list_val_width(test, short, "0x%hx", delim, "hi", check_short); } -static void __init numbers_list_field_width_val_hh(const char *delim) +static void numbers_list_field_width_val_hh(struct kunit *test, const char *delim) { - numbers_list_val_width(unsigned char, "%hhu", delim, "hhu", check_uchar); - numbers_list_val_width(signed char, "%hhd", delim, "hhd", check_char); - numbers_list_val_width(signed char, "%hhd", delim, "hhi", check_char); - numbers_list_val_width(unsigned char, "%hhx", delim, "hhx", check_uchar); - numbers_list_val_width(unsigned char, "0x%hhx", delim, "hhx", check_uchar); - numbers_list_val_width(signed char, "0x%hhx", delim, "hhi", check_char); + numbers_list_val_width(test, unsigned char, "%hhu", delim, "hhu", check_uchar); + numbers_list_val_width(test, signed char, "%hhd", delim, "hhd", check_char); + numbers_list_val_width(test, signed char, "%hhd", delim, "hhi", check_char); + numbers_list_val_width(test, unsigned char, "%hhx", delim, "hhx", check_uchar); + numbers_list_val_width(test, unsigned char, "0x%hhx", delim, "hhx", check_uchar); + numbers_list_val_width(test, signed char, "0x%hhx", delim, "hhi", check_char); } /* * List of numbers separated by delim. Each field width specifier is the * exact length of the corresponding value digits in the string being scanned. */ -static void __init numbers_list_field_width_val_width(const char *delim) +static void numbers_list_field_width_val_width(struct kunit *test, const char *delim) { - numbers_list_field_width_val_ll(delim); - numbers_list_field_width_val_l(delim); - numbers_list_field_width_val_d(delim); - numbers_list_field_width_val_h(delim); - numbers_list_field_width_val_hh(delim); + numbers_list_field_width_val_ll(test, delim); + numbers_list_field_width_val_l(test, delim); + numbers_list_field_width_val_d(test, delim); + numbers_list_field_width_val_h(test, delim); + numbers_list_field_width_val_hh(test, delim); } /* @@ -598,67 +573,67 @@ static void __init numbers_list_field_width_val_width(const char *delim) * of digits. For example the hex values c0,3,bf01,303 would have a * string representation of "c03bf01303" and extracted with "%2x%1x%4x%3x". */ -static void __init numbers_slice(void) +static void numbers_slice(struct kunit *test) { - numbers_list_field_width_val_width(""); + numbers_list_field_width_val_width(test, ""); } -#define test_number_prefix(T, str, scan_fmt, expect0, expect1, n_args, fn) \ +#define test_number_prefix(test, T, str, scan_fmt, expect0, expect1, n_args, fn)\ do { \ const T expect[2] = { expect0, expect1 }; \ T result[2] = { (T)~expect[0], (T)~expect[1] }; \ \ - _test(fn, &expect, str, scan_fmt, n_args, &result[0], &result[1]); \ + _test(test, fn, &expect, str, scan_fmt, n_args, &result[0], &result[1]);\ } while (0) /* * Number prefix is >= field width. * Expected behaviour is derived from testing userland sscanf. */ -static void __init numbers_prefix_overflow(void) +static void numbers_prefix_overflow(struct kunit *test) { /* * Negative decimal with a field of width 1, should quit scanning * and return 0. */ - test_number_prefix(long long, "-1 1", "%1lld %lld", 0, 0, 0, check_ll); - test_number_prefix(long, "-1 1", "%1ld %ld", 0, 0, 0, check_long); - test_number_prefix(int, "-1 1", "%1d %d", 0, 0, 0, check_int); - test_number_prefix(short, "-1 1", "%1hd %hd", 0, 0, 0, check_short); - test_number_prefix(signed char, "-1 1", "%1hhd %hhd", 0, 0, 0, check_char); - - test_number_prefix(long long, "-1 1", "%1lli %lli", 0, 0, 0, check_ll); - test_number_prefix(long, "-1 1", "%1li %li", 0, 0, 0, check_long); - test_number_prefix(int, "-1 1", "%1i %i", 0, 0, 0, check_int); - test_number_prefix(short, "-1 1", "%1hi %hi", 0, 0, 0, check_short); - test_number_prefix(signed char, "-1 1", "%1hhi %hhi", 0, 0, 0, check_char); + test_number_prefix(test, long long, "-1 1", "%1lld %lld", 0, 0, 0, check_ll); + test_number_prefix(test, long, "-1 1", "%1ld %ld", 0, 0, 0, check_long); + test_number_prefix(test, int, "-1 1", "%1d %d", 0, 0, 0, check_int); + test_number_prefix(test, short, "-1 1", "%1hd %hd", 0, 0, 0, check_short); + test_number_prefix(test, signed char, "-1 1", "%1hhd %hhd", 0, 0, 0, check_char); + + test_number_prefix(test, long long, "-1 1", "%1lli %lli", 0, 0, 0, check_ll); + test_number_prefix(test, long, "-1 1", "%1li %li", 0, 0, 0, check_long); + test_number_prefix(test, int, "-1 1", "%1i %i", 0, 0, 0, check_int); + test_number_prefix(test, short, "-1 1", "%1hi %hi", 0, 0, 0, check_short); + test_number_prefix(test, signed char, "-1 1", "%1hhi %hhi", 0, 0, 0, check_char); /* * 0x prefix in a field of width 1: 0 is a valid digit so should * convert. Next field scan starts at the 'x' which isn't a digit so * scan quits with one field converted. */ - test_number_prefix(unsigned long long, "0xA7", "%1llx%llx", 0, 0, 1, check_ull); - test_number_prefix(unsigned long, "0xA7", "%1lx%lx", 0, 0, 1, check_ulong); - test_number_prefix(unsigned int, "0xA7", "%1x%x", 0, 0, 1, check_uint); - test_number_prefix(unsigned short, "0xA7", "%1hx%hx", 0, 0, 1, check_ushort); - test_number_prefix(unsigned char, "0xA7", "%1hhx%hhx", 0, 0, 1, check_uchar); - test_number_prefix(long long, "0xA7", "%1lli%llx", 0, 0, 1, check_ll); - test_number_prefix(long, "0xA7", "%1li%lx", 0, 0, 1, check_long); - test_number_prefix(int, "0xA7", "%1i%x", 0, 0, 1, check_int); - test_number_prefix(short, "0xA7", "%1hi%hx", 0, 0, 1, check_short); - test_number_prefix(char, "0xA7", "%1hhi%hhx", 0, 0, 1, check_char); + test_number_prefix(test, unsigned long long, "0xA7", "%1llx%llx", 0, 0, 1, check_ull); + test_number_prefix(test, unsigned long, "0xA7", "%1lx%lx", 0, 0, 1, check_ulong); + test_number_prefix(test, unsigned int, "0xA7", "%1x%x", 0, 0, 1, check_uint); + test_number_prefix(test, unsigned short, "0xA7", "%1hx%hx", 0, 0, 1, check_ushort); + test_number_prefix(test, unsigned char, "0xA7", "%1hhx%hhx", 0, 0, 1, check_uchar); + test_number_prefix(test, long long, "0xA7", "%1lli%llx", 0, 0, 1, check_ll); + test_number_prefix(test, long, "0xA7", "%1li%lx", 0, 0, 1, check_long); + test_number_prefix(test, int, "0xA7", "%1i%x", 0, 0, 1, check_int); + test_number_prefix(test, short, "0xA7", "%1hi%hx", 0, 0, 1, check_short); + test_number_prefix(test, char, "0xA7", "%1hhi%hhx", 0, 0, 1, check_char); /* * 0x prefix in a field of width 2 using %x conversion: first field * converts to 0. Next field scan starts at the character after "0x". * Both fields will convert. */ - test_number_prefix(unsigned long long, "0xA7", "%2llx%llx", 0, 0xa7, 2, check_ull); - test_number_prefix(unsigned long, "0xA7", "%2lx%lx", 0, 0xa7, 2, check_ulong); - test_number_prefix(unsigned int, "0xA7", "%2x%x", 0, 0xa7, 2, check_uint); - test_number_prefix(unsigned short, "0xA7", "%2hx%hx", 0, 0xa7, 2, check_ushort); - test_number_prefix(unsigned char, "0xA7", "%2hhx%hhx", 0, 0xa7, 2, check_uchar); + test_number_prefix(test, unsigned long long, "0xA7", "%2llx%llx", 0, 0xa7, 2, check_ull); + test_number_prefix(test, unsigned long, "0xA7", "%2lx%lx", 0, 0xa7, 2, check_ulong); + test_number_prefix(test, unsigned int, "0xA7", "%2x%x", 0, 0xa7, 2, check_uint); + test_number_prefix(test, unsigned short, "0xA7", "%2hx%hx", 0, 0xa7, 2, check_ushort); + test_number_prefix(test, unsigned char, "0xA7", "%2hhx%hhx", 0, 0xa7, 2, check_uchar); /* * 0x prefix in a field of width 2 using %i conversion: first field @@ -666,124 +641,112 @@ static void __init numbers_prefix_overflow(void) * which will convert if can be interpreted as decimal but will fail * if it contains any hex digits (since no 0x prefix). */ - test_number_prefix(long long, "0x67", "%2lli%lli", 0, 67, 2, check_ll); - test_number_prefix(long, "0x67", "%2li%li", 0, 67, 2, check_long); - test_number_prefix(int, "0x67", "%2i%i", 0, 67, 2, check_int); - test_number_prefix(short, "0x67", "%2hi%hi", 0, 67, 2, check_short); - test_number_prefix(char, "0x67", "%2hhi%hhi", 0, 67, 2, check_char); - - test_number_prefix(long long, "0xA7", "%2lli%lli", 0, 0, 1, check_ll); - test_number_prefix(long, "0xA7", "%2li%li", 0, 0, 1, check_long); - test_number_prefix(int, "0xA7", "%2i%i", 0, 0, 1, check_int); - test_number_prefix(short, "0xA7", "%2hi%hi", 0, 0, 1, check_short); - test_number_prefix(char, "0xA7", "%2hhi%hhi", 0, 0, 1, check_char); -} - -#define _test_simple_strtoxx(T, fn, gen_fmt, expect, base) \ -do { \ - T got; \ - char *endp; \ - int len; \ - bool fail = false; \ - \ - total_tests++; \ - len = snprintf(test_buffer, BUF_SIZE, gen_fmt, expect); \ - got = (fn)(test_buffer, &endp, base); \ - pr_debug(#fn "(\"%s\", %d) -> " gen_fmt "\n", test_buffer, base, got); \ - if (got != (expect)) { \ - fail = true; \ - pr_warn(#fn "(\"%s\", %d): got " gen_fmt " expected " gen_fmt "\n", \ - test_buffer, base, got, expect); \ - } else if (endp != test_buffer + len) { \ - fail = true; \ - pr_warn(#fn "(\"%s\", %d) startp=0x%px got endp=0x%px expected 0x%px\n", \ - test_buffer, base, test_buffer, \ - test_buffer + len, endp); \ - } \ - \ - if (fail) \ - failed_tests++; \ + test_number_prefix(test, long long, "0x67", "%2lli%lli", 0, 67, 2, check_ll); + test_number_prefix(test, long, "0x67", "%2li%li", 0, 67, 2, check_long); + test_number_prefix(test, int, "0x67", "%2i%i", 0, 67, 2, check_int); + test_number_prefix(test, short, "0x67", "%2hi%hi", 0, 67, 2, check_short); + test_number_prefix(test, char, "0x67", "%2hhi%hhi", 0, 67, 2, check_char); + + test_number_prefix(test, long long, "0xA7", "%2lli%lli", 0, 0, 1, check_ll); + test_number_prefix(test, long, "0xA7", "%2li%li", 0, 0, 1, check_long); + test_number_prefix(test, int, "0xA7", "%2i%i", 0, 0, 1, check_int); + test_number_prefix(test, short, "0xA7", "%2hi%hi", 0, 0, 1, check_short); + test_number_prefix(test, char, "0xA7", "%2hhi%hhi", 0, 0, 1, check_char); +} + +#define _test_simple_strtoxx(test, T, fn, gen_fmt, expect, base) \ +do { \ + T got; \ + char *endp; \ + int len; \ + \ + len = snprintf(test_buffer, BUF_SIZE, gen_fmt, expect); \ + got = (fn)(test_buffer, &endp, base); \ + pr_debug(#fn "(\"%s\", %d) -> " gen_fmt "\n", test_buffer, base, got); \ + KUNIT_EXPECT_EQ_MSG(test, got, expect, #fn "(\"%s\", %d)", test_buffer, base); \ + KUNIT_EXPECT_PTR_EQ_MSG(test, endp, test_buffer + len, \ + #fn "(\"%s\", %d)", test_buffer, base); \ } while (0) -#define test_simple_strtoxx(T, fn, gen_fmt, base) \ +#define test_simple_strtoxx(test, T, fn, gen_fmt, base) \ do { \ int i; \ \ for (i = 0; i < ARRAY_SIZE(numbers); i++) { \ - _test_simple_strtoxx(T, fn, gen_fmt, (T)numbers[i], base); \ + _test_simple_strtoxx(test, T, fn, gen_fmt, (T)numbers[i], base);\ \ if (is_signed_type(T)) \ - _test_simple_strtoxx(T, fn, gen_fmt, \ + _test_simple_strtoxx(test, T, fn, gen_fmt, \ -(T)numbers[i], base); \ } \ } while (0) -static void __init test_simple_strtoull(void) +static void test_simple_strtoull(struct kunit *test) { - test_simple_strtoxx(unsigned long long, simple_strtoull, "%llu", 10); - test_simple_strtoxx(unsigned long long, simple_strtoull, "%llu", 0); - test_simple_strtoxx(unsigned long long, simple_strtoull, "%llx", 16); - test_simple_strtoxx(unsigned long long, simple_strtoull, "0x%llx", 16); - test_simple_strtoxx(unsigned long long, simple_strtoull, "0x%llx", 0); + test_simple_strtoxx(test, unsigned long long, simple_strtoull, "%llu", 10); + test_simple_strtoxx(test, unsigned long long, simple_strtoull, "%llu", 0); + test_simple_strtoxx(test, unsigned long long, simple_strtoull, "%llx", 16); + test_simple_strtoxx(test, unsigned long long, simple_strtoull, "0x%llx", 16); + test_simple_strtoxx(test, unsigned long long, simple_strtoull, "0x%llx", 0); } -static void __init test_simple_strtoll(void) +static void test_simple_strtoll(struct kunit *test) { - test_simple_strtoxx(long long, simple_strtoll, "%lld", 10); - test_simple_strtoxx(long long, simple_strtoll, "%lld", 0); - test_simple_strtoxx(long long, simple_strtoll, "%llx", 16); - test_simple_strtoxx(long long, simple_strtoll, "0x%llx", 16); - test_simple_strtoxx(long long, simple_strtoll, "0x%llx", 0); + test_simple_strtoxx(test, long long, simple_strtoll, "%lld", 10); + test_simple_strtoxx(test, long long, simple_strtoll, "%lld", 0); + test_simple_strtoxx(test, long long, simple_strtoll, "%llx", 16); + test_simple_strtoxx(test, long long, simple_strtoll, "0x%llx", 16); + test_simple_strtoxx(test, long long, simple_strtoll, "0x%llx", 0); } -static void __init test_simple_strtoul(void) +static void test_simple_strtoul(struct kunit *test) { - test_simple_strtoxx(unsigned long, simple_strtoul, "%lu", 10); - test_simple_strtoxx(unsigned long, simple_strtoul, "%lu", 0); - test_simple_strtoxx(unsigned long, simple_strtoul, "%lx", 16); - test_simple_strtoxx(unsigned long, simple_strtoul, "0x%lx", 16); - test_simple_strtoxx(unsigned long, simple_strtoul, "0x%lx", 0); + test_simple_strtoxx(test, unsigned long, simple_strtoul, "%lu", 10); + test_simple_strtoxx(test, unsigned long, simple_strtoul, "%lu", 0); + test_simple_strtoxx(test, unsigned long, simple_strtoul, "%lx", 16); + test_simple_strtoxx(test, unsigned long, simple_strtoul, "0x%lx", 16); + test_simple_strtoxx(test, unsigned long, simple_strtoul, "0x%lx", 0); } -static void __init test_simple_strtol(void) +static void test_simple_strtol(struct kunit *test) { - test_simple_strtoxx(long, simple_strtol, "%ld", 10); - test_simple_strtoxx(long, simple_strtol, "%ld", 0); - test_simple_strtoxx(long, simple_strtol, "%lx", 16); - test_simple_strtoxx(long, simple_strtol, "0x%lx", 16); - test_simple_strtoxx(long, simple_strtol, "0x%lx", 0); + test_simple_strtoxx(test, long, simple_strtol, "%ld", 10); + test_simple_strtoxx(test, long, simple_strtol, "%ld", 0); + test_simple_strtoxx(test, long, simple_strtol, "%lx", 16); + test_simple_strtoxx(test, long, simple_strtol, "0x%lx", 16); + test_simple_strtoxx(test, long, simple_strtol, "0x%lx", 0); } /* Selection of common delimiters/separators between numbers in a string. */ -static const char * const number_delimiters[] __initconst = { +static const char * const number_delimiters[] = { " ", ":", ",", "-", "/", }; -static void __init test_numbers(void) +static void test_numbers(struct kunit *test) { int i; /* String containing only one number. */ - numbers_simple(); + numbers_simple(test); /* String with multiple numbers separated by delimiter. */ for (i = 0; i < ARRAY_SIZE(number_delimiters); i++) { - numbers_list(number_delimiters[i]); + numbers_list(test, number_delimiters[i]); /* Field width may be longer than actual field digits. */ - numbers_list_field_width_typemax(number_delimiters[i]); + numbers_list_field_width_typemax(test, number_delimiters[i]); /* Each field width exactly length of actual field digits. */ - numbers_list_field_width_val_width(number_delimiters[i]); + numbers_list_field_width_val_width(test, number_delimiters[i]); } /* Slice continuous sequence of digits using field widths. */ - numbers_slice(); + numbers_slice(test); - numbers_prefix_overflow(); + numbers_prefix_overflow(test); } -static void __init selftest(void) +static void scanf_test(struct kunit *test) { test_buffer = kmalloc(BUF_SIZE, GFP_KERNEL); if (!test_buffer) @@ -797,18 +760,29 @@ static void __init selftest(void) prandom_seed_state(&rnd_state, 3141592653589793238ULL); - test_numbers(); + test_numbers(test); - test_simple_strtoull(); - test_simple_strtoll(); - test_simple_strtoul(); - test_simple_strtol(); + test_simple_strtoull(test); + test_simple_strtoll(test); + test_simple_strtoul(test); + test_simple_strtol(test); kfree(fmt_buffer); kfree(test_buffer); } -KSTM_MODULE_LOADERS(test_scanf); +static struct kunit_case scanf_test_cases[] = { + KUNIT_CASE(scanf_test), + {} +}; + +static struct kunit_suite scanf_test_suite = { + .name = "scanf", + .test_cases = scanf_test_cases, +}; + +kunit_test_suite(scanf_test_suite); + MODULE_AUTHOR("Richard Fitzgerald <rf(a)opensource.cirrus.com>"); MODULE_DESCRIPTION("Test cases for sscanf facility"); MODULE_LICENSE("GPL v2"); diff --git a/tools/testing/selftests/lib/Makefile b/tools/testing/selftests/lib/Makefile index c52fe3ad8e98..4afda556151f 100644 --- a/tools/testing/selftests/lib/Makefile +++ b/tools/testing/selftests/lib/Makefile @@ -4,5 +4,5 @@ # No binaries, but make sure arg-less "make" doesn't trigger "run_tests" all: -TEST_PROGS := printf.sh bitmap.sh prime_numbers.sh scanf.sh +TEST_PROGS := printf.sh bitmap.sh prime_numbers.sh include ../lib.mk diff --git a/tools/testing/selftests/lib/config b/tools/testing/selftests/lib/config index dc15aba8d0a3..80b55a504868 100644 --- a/tools/testing/selftests/lib/config +++ b/tools/testing/selftests/lib/config @@ -1,5 +1,4 @@ CONFIG_TEST_PRINTF=m -CONFIG_TEST_SCANF=m CONFIG_TEST_BITMAP=m CONFIG_PRIME_NUMBERS=m CONFIG_TEST_BITOPS=m diff --git a/tools/testing/selftests/lib/scanf.sh b/tools/testing/selftests/lib/scanf.sh deleted file mode 100755 index b59b8ba561c3..000000000000 --- a/tools/testing/selftests/lib/scanf.sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0 -# Tests the scanf infrastructure using test_scanf kernel module. -$(dirname $0)/../kselftest/module.sh "scanf" test_scanf --- base-commit: 18fe18c99c8d90d77c7ed6b42f48fa5b4e5c99c3 change-id: 20250131-scanf-kunit-convert-f70dc33bb34c Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

2 months, 3 weeks

3
9
0 0

[PATCH 0/2] tools/nolibc: add support for directory access

by Thomas Weißschuh

Add support opendir(), readdir(), closedir() and friends. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Thomas Weißschuh (2): tools/nolibc: add support for sys_llseek() tools/nolibc: add support for directory access tools/include/nolibc/stdio.h | 76 ++++++++++++++++++++++++++++ tools/include/nolibc/sys.h | 29 ++++++++++- tools/include/nolibc/types.h | 5 ++ tools/testing/selftests/nolibc/nolibc-test.c | 37 ++++++++++++++ 4 files changed, 146 insertions(+), 1 deletion(-) --- base-commit: d3d90cc2891c9cf4ecba7b85c0af716ab755c7e5 change-id: 20250130-nolibc-dir-980c2e2b661a Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

2 months, 3 weeks

2
6
0 0

[PATCH net-next 0/1] selftests: net: Add support for testing SO_RCVMARK and SO_RCVPRIORITY

by Anna Emese Nyiri

After submitting the patch implementing the SO_RCVPRIORITY socket option (https://lore.kernel.org/netdev/20241213084457.45120-5-annaemesenyiri@gmail.…), it was requested to include a test for the functionality. As a first step, write a test that also validates the SO_RCVMARK value, since no existing test covers it. If this combined test is not suitable, I will provide a standalone test specifically for SO_RCVPRIORITY and submit it separately. Anna Emese Nyiri (1): add support for testing SO_RCVMARK and SO_RCVPRIORITY tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/so_rcv_listener.c | 147 ++++++++++++++++++ tools/testing/selftests/net/test_so_rcv.sh | 56 +++++++ 3 files changed, 204 insertions(+) create mode 100644 tools/testing/selftests/net/so_rcv_listener.c create mode 100755 tools/testing/selftests/net/test_so_rcv.sh -- 2.43.0

2 months, 3 weeks

5
6
0 0

[PATCH bpf-next v7 0/5] Support eliding map lookup nullness

by Daniel Xu

This patch allows progs to elide a null check on statically known map lookup keys. In other words, if the verifier can statically prove that the lookup will be in-bounds, allow the prog to drop the null check. This is useful for two reasons: 1. Large numbers of nullness checks (especially when they cannot fail) unnecessarily pushes prog towards BPF_COMPLEXITY_LIMIT_JMP_SEQ. 2. It forms a tighter contract between programmer and verifier. For (1), bpftrace is starting to make heavier use of percpu scratch maps. As a result, for user scripts with large number of unrolled loops, we are starting to hit jump complexity verification errors. These percpu lookups cannot fail anyways, as we only use static key values. Eliding nullness probably results in less work for verifier as well. For (2), percpu scratch maps are often used as a larger stack, as the currrent stack is limited to 512 bytes. In these situations, it is desirable for the programmer to express: "this lookup should never fail, and if it does, it means I messed up the code". By omitting the null check, the programmer can "ask" the verifier to double check the logic. === Changelog === Changes in v7: * Use more accurate frame number when marking precise * Add test for non-stack key * Test for marking stack slot precise Changes in v6: * Use is_spilled_scalar_reg() helper and remove unnecessary comment * Add back deleted selftest with different helper to dirty dst buffer * Check size of spill is exactly key_size and update selftests * Read slot_type from correct offset into the spi * Rewrite selftests in C where possible * Mark constant map keys as precise Changes in v5: * Dropped all acks * Use s64 instead of long for const_map_key * Ensure stack slot contains spilled reg before accessing spilled_ptr * Ensure spilled reg is a scalar before accessing tnum const value * Fix verifier selftest for 32-bit write to write at 8 byte alignment to ensure spill is tracked * Introduce more precise tracking of helper stack accesses * Do constant map key extraction as part of helper argument processing and then remove duplicated stack checks * Use ret_flag instead of regs[BPF_REG_0].type * Handle STACK_ZERO * Fix bug in bpf_load_hdr_opt() arg annotation Changes in v4: * Only allow for CAP_BPF * Add test for stack growing upwards * Improve comment about stack growing upwards Changes in v3: * Check if stack is (erroneously) growing upwards * Mention in commit message why existing tests needed change Changes in v2: * Added a check for when R2 is not a ptr to stack * Added a check for when stack is uninitialized (no stack slot yet) * Updated existing tests to account for null elision * Added test case for when R2 can be both const and non-const Daniel Xu (5): bpf: verifier: Add missing newline on verbose() call bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write bpf: verifier: Refactor helper access type tracking bpf: verifier: Support eliding map lookup nullness bpf: selftests: verifier: Add nullness elision tests kernel/bpf/verifier.c | 139 ++++++++++--- net/core/filter.c | 2 +- .../testing/selftests/bpf/progs/dynptr_fail.c | 6 +- tools/testing/selftests/bpf/progs/iters.c | 14 +- .../selftests/bpf/progs/map_kptr_fail.c | 2 +- .../selftests/bpf/progs/test_global_func10.c | 2 +- .../selftests/bpf/progs/uninit_stack.c | 5 +- .../bpf/progs/verifier_array_access.c | 188 ++++++++++++++++++ .../bpf/progs/verifier_basic_stack.c | 2 +- .../selftests/bpf/progs/verifier_const_or.c | 4 +- .../progs/verifier_helper_access_var_len.c | 12 +- .../selftests/bpf/progs/verifier_int_ptr.c | 2 +- .../selftests/bpf/progs/verifier_map_in_map.c | 2 +- .../selftests/bpf/progs/verifier_mtu.c | 2 +- .../selftests/bpf/progs/verifier_raw_stack.c | 4 +- .../selftests/bpf/progs/verifier_unpriv.c | 2 +- .../selftests/bpf/progs/verifier_var_off.c | 8 +- tools/testing/selftests/bpf/verifier/calls.c | 2 +- .../testing/selftests/bpf/verifier/map_kptr.c | 2 +- 19 files changed, 331 insertions(+), 69 deletions(-) -- 2.47.1

2 months, 3 weeks

4
11
0 0

[PATCH] selftests/vDSO: Fix undefined CLONE_NEWTIME by including

by Purva Yeshi

Fix the build failure caused by the undefined `CLONE_NEWTIME`. Include the `linux/sched.h` header file where the function is defined to ensure successful compilation of the selftests. Signed-off-by: Purva Yeshi <purvayeshi550(a)gmail.com> --- tools/testing/selftests/vDSO/vdso_test_getrandom.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/vDSO/vdso_test_getrandom.c b/tools/testing/selftests/vDSO/vdso_test_getrandom.c index 95057f7567db..b2c9cf15878b 100644 --- a/tools/testing/selftests/vDSO/vdso_test_getrandom.c +++ b/tools/testing/selftests/vDSO/vdso_test_getrandom.c @@ -29,6 +29,8 @@ #include "vdso_config.h" #include "vdso_call.h" +#include <linux/sched.h> + #ifndef timespecsub #define timespecsub(tsp, usp, vsp) \ do { \ -- 2.34.1

2 months, 3 weeks

2
5
0 0

[PATCH v2 0/5] selftests/nolibc: test kernel configuration cleanups

by Thomas Weißschuh

A few cleanups and optimizations for the management of the kernel configuration. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Changes in v2: - Rebase on current torvalds/master - Call "make defconfig" separately - Link to v1: https://lore.kernel.org/r/20250122-nolibc-config-v1-0-a697db968b49@weisssch… --- Thomas Weißschuh (5): selftests/nolibc: drop custom EXTRACONFIG functionality selftests/nolibc: drop call to prepare target selftests/nolibc: drop call to mrproper target selftests/nolibc: execute defconfig before other targets selftests/nolibc: always keep test kernel configuration up to date tools/testing/selftests/nolibc/Makefile | 17 +++++------------ tools/testing/selftests/nolibc/run-tests.sh | 7 +++---- 2 files changed, 8 insertions(+), 16 deletions(-) --- base-commit: 21266b8df5224c4f677acf9f353eecc9094731f0 change-id: 20250122-nolibc-config-d639e1612c93 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

2 months, 3 weeks

2
12
0 0

[PATCH 00/16] selftest/mm: Remove warnings found by adding compiler flags

by Muhammad Usama Anjum

Recently, I reviewed a patch on the mm/kselftest mailing list about a test which had obvious type mismatch fix in it. It was strange why that wasn't caught during development and when patch was accepted. This led me to discover that those extra compiler options to catch these warnings aren't being used. When I added them, I found tens of warnings in just mm suite. In this series, I'm fixing those warnings. The last check adds the compiler flags with which the warnings have been caught. Muhammad Usama Anjum (16): selftests/mm: remove argc and argv unused parameters selftests/mm: Fix unused parameter warnings selftests/mm: Fix unused parameter warnings selftests/mm: Fix type mismatch warnings selftests/mm: kselftest_harness: Fix warnings selftests/mm: cow: remove unused variables and fix type mismatch errors selftests/mm: hmm-tests: Remove always false expressions selftests/mm: guard-pages: Fix type mismatch warnings selftests/mm: hugetlb-madvise: fix type mismatch issues selftests/mm: hugepage-vmemmap: fix type mismatch warnings selftests/mm: hugetlb-read-hwpoison: Fix type mismatch warnings selftests/mm: khugepaged: Fix type mismatch warnings selftests/mm: protection_keys: Fix variables types mismatch warnings selftests/mm: thuge-gen: Fix type mismatch warnings selftests/mm: uffd-*: Fix all type mismatch warnings selftests/mm: Makefile: Add the compiler flags tools/testing/selftests/kselftest_harness.h | 6 +- tools/testing/selftests/mm/Makefile | 1 + tools/testing/selftests/mm/compaction_test.c | 4 +- tools/testing/selftests/mm/cow.c | 48 ++++++++------- tools/testing/selftests/mm/droppable.c | 2 +- tools/testing/selftests/mm/guard-pages.c | 4 +- tools/testing/selftests/mm/gup_longterm.c | 5 +- tools/testing/selftests/mm/hmm-tests.c | 4 +- tools/testing/selftests/mm/hugepage-vmemmap.c | 5 +- tools/testing/selftests/mm/hugetlb-madvise.c | 4 +- .../selftests/mm/hugetlb-read-hwpoison.c | 6 +- .../selftests/mm/hugetlb-soft-offline.c | 2 +- tools/testing/selftests/mm/hugetlb_dio.c | 2 +- .../selftests/mm/hugetlb_fault_after_madv.c | 6 +- .../selftests/mm/hugetlb_madv_vs_map.c | 8 +-- tools/testing/selftests/mm/khugepaged.c | 16 ++--- .../selftests/mm/ksm_functional_tests.c | 6 +- tools/testing/selftests/mm/ksm_tests.c | 17 +++--- tools/testing/selftests/mm/madv_populate.c | 2 +- tools/testing/selftests/mm/map_populate.c | 2 +- tools/testing/selftests/mm/memfd_secret.c | 6 +- .../testing/selftests/mm/mlock-random-test.c | 6 +- tools/testing/selftests/mm/mlock2-tests.c | 2 +- tools/testing/selftests/mm/on-fault-limit.c | 2 +- tools/testing/selftests/mm/pkey-x86.h | 4 +- .../selftests/mm/pkey_sighandler_tests.c | 21 ++++--- tools/testing/selftests/mm/protection_keys.c | 34 ++++++----- tools/testing/selftests/mm/soft-dirty.c | 8 +-- .../selftests/mm/split_huge_page_test.c | 4 +- tools/testing/selftests/mm/thuge-gen.c | 10 ++-- tools/testing/selftests/mm/uffd-common.c | 24 ++++---- tools/testing/selftests/mm/uffd-common.h | 2 +- tools/testing/selftests/mm/uffd-stress.c | 4 +- tools/testing/selftests/mm/uffd-unit-tests.c | 58 +++++++++---------- tools/testing/selftests/mm/uffd-wp-mremap.c | 2 +- .../selftests/mm/virtual_address_range.c | 2 +- 36 files changed, 180 insertions(+), 159 deletions(-) -- 2.39.5

2 months, 3 weeks

6
25
0 0

[PATCH RFC net-next v2 0/6] Device memory TCP TX

by Mina Almasry

RFC v2: https://patchwork.kernel.org/project/netdevbpf/list/?series=920056&state=* ======= RFC v2 addresses much of the feedback from RFC v1. I plan on sending something close to this as net-next reopens, sending it slightly early to get feedback if any. Major changes: -------------- - much improved UAPI as suggested by Stan. We now interpret the iov_base of the passed in iov from userspace as the offset into the dmabuf to send from. This removes the need to set iov.iov_base = NULL which may be confusing to users, and enables us to send multiple iovs in the same sendmsg() call. ncdevmem and the docs show a sample use of that. - Removed the duplicate dmabuf iov_iter in binding->iov_iter. I think this is good improvment as it was confusing to keep track of 2 iterators for the same sendmsg, and mistracking both iterators caused a couple of bugs reported in the last iteration that are now resolved with this streamlining. - Improved test coverage in ncdevmem. Now muliple sendmsg() are tested, and sending multiple iovs in the same sendmsg() is tested. - Fixed issue where dmabuf unmapping was happening in invalid context (Stan). ==================================================================== The TX path had been dropped from the Device Memory TCP patch series post RFCv1 [1], to make that series slightly easier to review. This series rebases the implementation of the TX path on top of the net_iov/netmem framework agreed upon and merged. The motivation for the feature is thoroughly described in the docs & cover letter of the original proposal, so I don't repeat the lengthy descriptions here, but they are available in [1]. Sending this series as RFC as the winder closure is immenient. I plan on reposting as non-RFC once the tree re-opens, addressing any feedback I receive in the meantime. Full outline on usage of the TX path is detailed in the documentation added in the first patch. Test example is available via the kselftest included in the series as well. The series is relatively small, as the TX path for this feature largely piggybacks on the existing MSG_ZEROCOPY implementation. Patch Overview: --------------- 1. Documentation & tests to give high level overview of the feature being added. 2. Add netmem refcounting needed for the TX path. 3. Devmem TX netlink API. 4. Devmem TX net stack implementation. Testing: -------- Testing is very similar to devmem TCP RX path. The ncdevmem test used for the RX path is now augemented with client functionality to test TX path. * Test Setup: Kernel: net-next with this RFC and memory provider API cherry-picked locally. Hardware: Google Cloud A3 VMs. NIC: GVE with header split & RSS & flow steering support. Performance results are not included with this version, unfortunately. I'm having issues running the dma-buf exporter driver against the upstream kernel on my test setup. The issues are specific to that dma-buf exporter and do not affect this patch series. I plan to follow up this series with perf fixes if the tests point to issues once they're up and running. Special thanks to Stan who took a stab at rebasing the TX implementation on top of the netmem/net_iov framework merged. Parts of his proposal [2] that are reused as-is are forked off into their own patches to give full credit. [1] https://lore.kernel.org/netdev/20240909054318.1809580-1-almasrymina@google.… [2] https://lore.kernel.org/netdev/20240913150913.1280238-2-sdf@fomichev.me/T/#… Cc: sdf(a)fomichev.me Cc: asml.silence(a)gmail.com Cc: dw(a)davidwei.uk Cc: Jamal Hadi Salim <jhs(a)mojatatu.com> Cc: Victor Nogueira <victor(a)mojatatu.com> Cc: Pedro Tammela <pctammela(a)mojatatu.com> Mina Almasry (5): net: add devmem TCP TX documentation selftests: ncdevmem: Implement devmem TCP TX net: add get_netmem/put_netmem support net: devmem: Implement TX path net: devmem: make dmabuf unbinding scheduled work Stanislav Fomichev (1): net: devmem: TCP tx netlink api Documentation/netlink/specs/netdev.yaml | 12 + Documentation/networking/devmem.rst | 144 ++++++++- include/linux/skbuff.h | 15 +- include/linux/skbuff_ref.h | 4 +- include/net/netmem.h | 3 + include/net/sock.h | 1 + include/uapi/linux/netdev.h | 1 + include/uapi/linux/uio.h | 6 +- net/core/datagram.c | 41 ++- net/core/devmem.c | 110 ++++++- net/core/devmem.h | 70 ++++- net/core/netdev-genl-gen.c | 13 + net/core/netdev-genl-gen.h | 1 + net/core/netdev-genl.c | 67 ++++- net/core/skbuff.c | 36 ++- net/core/sock.c | 8 + net/ipv4/tcp.c | 36 ++- net/vmw_vsock/virtio_transport_common.c | 3 +- tools/include/uapi/linux/netdev.h | 1 + .../selftests/drivers/net/hw/ncdevmem.c | 276 +++++++++++++++++- 20 files changed, 802 insertions(+), 46 deletions(-) -- 2.48.1.362.g079036d154-goog

2 months, 3 weeks

3
16
0 0

[PATCH RFC net-next v3 0/8] netconsole: Add support for CPU population

by Breno Leitao

The current implementation of netconsole sends all log messages in parallel, which can lead to an intermixed and interleaved output on the receiving side. This makes it challenging to demultiplex the messages and attribute them to their originating CPUs. As a result, users and developers often struggle to effectively analyze and debug the parallel log output received through netconsole. Example of a message got from produciton hosts: ------------[ cut here ]------------ ------------[ cut here ]------------ refcount_t: saturated; leaking memory. WARNING: CPU: 2 PID: 1613668 at lib/refcount.c:22 refcount_warn_saturate+0x5e/0xe0 refcount_t: addition on 0; use-after-free. WARNING: CPU: 26 PID: 4139916 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0xe0 Modules linked in: bpf_preload(E) vhost_net(E) tun(E) vhost(E) This series of patches introduces a new feature to the netconsole subsystem that allows the automatic population of the CPU number in the userdata field for each log message. This enhancement provides several benefits: * Improved demultiplexing of parallel log output: When multiple CPUs are sending messages concurrently, the added CPU number in the userdata makes it easier to differentiate and attribute the messages to their originating CPUs. * Better visibility into message sources: The CPU number information gives users and developers more insight into which specific CPU a particular log message came from, which can be valuable for debugging and analysis. The changes in this series are as follows Patches:: Patch "consolidate send buffers into netconsole_target struct" ================================================= Move the static buffers to netconsole target, from static declaration in send_msg_no_fragmentation() and send_msg_fragmented(). Patch "netconsole: Rename userdata to extradata" ================================================= Create the a concept of extradata, which encompasses the concept of userdata and the upcoming sysdatao Sysdata is a new concept being added, which is basically fields that are populated by the kernel. At this time only the CPU#, but, there is a desire to add current task name, kernel release version, etc. Patch "netconsole: Helper to count number of used entries" =========================================================== Create a simple helper to count number of entries in extradata. I am separating this in a function since it will need to count userdata and sysdata. For instance, when the user adds an extra userdata, we need to check if there is space, counting the previous data entries (from userdata and cpu data) Patch "Introduce configfs helpers for sysdata features" ====================================================== Create the concept of sysdata feature in the netconsole target, and create the configfs helpers to enable the bit in nt->sysdata Patch "Include sysdata in extradata entry count" ================================================ Add the concept of sysdata when counting for available space in the buffer. This will protect users from creating new userdata/sysdata if there is no more space Patch "netconsole: add support for sysdata and CPU population" =============================================================== This is the core patch. Basically add a new option to enable automatic CPU number population in the netconsole userdata Provides a new "cpu_nr" sysfs attribute to control this feature Patch "netconsole: selftest: test CPU number auto-population" ============================================================= Expands the existing netconsole selftest to verify the CPU number auto-population functionality Ensures the received netconsole messages contain the expected "cpu=<CPU>" entry in the message. Test different permutation with userdata Patch "netconsole: docs: Add documentation for CPU number auto-population" ============================================================================= Updates the netconsole documentation to explain the new CPU number auto-population feature Provides instructions on how to enable and use the feature I believe these changes will be a valuable addition to the netconsole subsystem, enhancing its usefulness for kernel developers and users. Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Changes in v3: - Moved the buffer into netconsole_target, avoiding static functions in the send path (Jakub). - Fix a documentation error (Randy Dunlap) - Created a function that handle all the extradata, consolidating it in a single place (Jakub) - Split the patch even more, trying to simplify the review. - Link to v2: https://lore.kernel.org/r/20250115-netcon_cpu-v2-0-95971b44dc56@debian.org Changes in v2: - Create the concept of extradata and sysdata. This will make the design easier to understand, and the code easier to read. * Basically extradata encompasses userdata and the new sysdata. Userdata originates from user, and sysdata originates in kernel. - Improved the test to send from a very specific CPU, which can be checked to be correct on the other side, as suggested by Jakub. - Fixed a bug where CPU # was populated at the wrong place - Link to v1: https://lore.kernel.org/r/20241113-netcon_cpu-v1-0-d187bf7c0321@debian.org --- Breno Leitao (8): netconsole: consolidate send buffers into netconsole_target struct netconsole: Rename userdata to extradata netconsole: Helper to count number of used entries netconsole: Introduce configfs helpers for sysdata features netconsole: Include sysdata in extradata entry count netconsole: add support for sysdata and CPU population netconsole: selftest: test for sysdata CPU netconsole: docs: Add documentation for CPU number auto-population Documentation/networking/netconsole.rst | 45 ++++ drivers/net/netconsole.c | 260 ++++++++++++++++----- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 17 ++ .../selftests/drivers/net/netcons_sysdata.sh | 167 +++++++++++++ 5 files changed, 426 insertions(+), 64 deletions(-) --- base-commit: fa10c9f5aa705deb43fd65623508074bee942764 change-id: 20241108-netcon_cpu-ce3917e88f4b Best regards, -- Breno Leitao <leitao(a)debian.org>

2 months, 3 weeks

3
22
0 0

[PATCH] kunit: tool: Use qboot on QEMU x86_64

by Brendan Jackman

As noted in [0], SeaBIOS (QEMU default) makes a mess of the terminal, qboot does not. It turns out this is actually useful with kunit.py, since the user is exposed to this issue if they set --raw_output=all. qboot is also faster than SeaBIOS, but it's is marginal for this usecase. [0] https://lore.kernel.org/all/CA+i-1C0wYb-gZ8Mwh3WSVpbk-LF-Uo+njVbASJPe1WXDUR… Both SeaBIOS and qboot are x86-specific. Signed-off-by: Brendan Jackman <jackmanb(a)google.com> --- tools/testing/kunit/qemu_configs/x86_64.py | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/kunit/qemu_configs/x86_64.py b/tools/testing/kunit/qemu_configs/x86_64.py index dc794907686304b325dbe180149169dd79bcd44f..4a6bf4e048f5b05c889e3b9b03046f14cc9b0bcc 100644 --- a/tools/testing/kunit/qemu_configs/x86_64.py +++ b/tools/testing/kunit/qemu_configs/x86_64.py @@ -7,4 +7,6 @@ CONFIG_SERIAL_8250_CONSOLE=y''', qemu_arch='x86_64', kernel_path='arch/x86/boot/bzImage', kernel_command_line='console=ttyS0', - extra_qemu_params=[]) + # qboot is faster than SeaBIOS and doesn't mess up + # the terminal. + extra_qemu_params=['-bios', 'qboot.rom']) --- base-commit: 8ea24baaaa869adeb39c6b9ce7542657a7251b56 change-id: 20250124-kunit-qboot-5201945f7e86 Best regards, -- Brendan Jackman <jackmanb(a)google.com>

2 months, 3 weeks

2
2
0 0

[PATCH bpf-next v2 0/7] bpf: Add probe_read_{kernel,user}_dynptr and copy_from_user_dynptr

by Levi Zim via B4 Relay

This series introduce the dynptr counterpart of the bpf_probe_read_{kernel,user} helpers and bpf_copy_from_user helper. These helpers are helpful for reading variable-length data from kernel memory into dynptr without going through an intermediate buffer. Link: https://lore.kernel.org/bpf/MEYP282MB2312CFCE5F7712FDE313215AC64D2@MEYP282M… Suggested-by: Andrii Nakryiko <andrii.nakryiko(a)gmail.com> Signed-off-by: Levi Zim <rsworktech(a)outlook.com> --- Changes in v2: - Add missing bpf-next prefix. I forgot it in the initial series. Sorry about that. - Link to v1: https://lore.kernel.org/r/20250125-bpf_dynptr_probe-v1-0-c3cb121f6951@outlo… --- Levi Zim (7): bpf: Implement bpf_probe_read_kernel_dynptr helper bpf: Implement bpf_probe_read_user_dynptr helper bpf: Implement bpf_copy_from_user_dynptr helper tools headers UAPI: Update tools's copy of bpf.h header selftests/bpf: probe_read_kernel_dynptr test selftests/bpf: probe_read_user_dynptr test selftests/bpf: copy_from_user_dynptr test include/linux/bpf.h | 3 + include/uapi/linux/bpf.h | 49 ++++++++++ kernel/bpf/helpers.c | 53 ++++++++++- kernel/trace/bpf_trace.c | 72 ++++++++++++++ tools/include/uapi/linux/bpf.h | 49 ++++++++++ tools/testing/selftests/bpf/prog_tests/dynptr.c | 45 ++++++++- tools/testing/selftests/bpf/progs/dynptr_success.c | 106 +++++++++++++++++++++ 7 files changed, 374 insertions(+), 3 deletions(-) --- base-commit: d0d106a2bd21499901299160744e5fe9f4c83ddb change-id: 20250124-bpf_dynptr_probe-ab483c554f1a Best regards, -- Levi Zim <rsworktech(a)outlook.com>

2 months, 4 weeks

6
20
0 0

[PATCH v2 net] udp: gso: do not drop small packets when PMTU reduces

by Yan Zhai

Commit 4094871db1d6 ("udp: only do GSO if # of segs > 1") avoided GSO for small packets. But the kernel currently dismisses GSO requests only after checking MTU/PMTU on gso_size. This means any packets, regardless of their payload sizes, could be dropped when PMTU becomes smaller than requested gso_size. We encountered this issue in production and it caused a reliability problem that new QUIC connection cannot be established before PMTU cache expired, while non GSO sockets still worked fine at the same time. Ideally, do not check any GSO related constraints when payload size is smaller than requested gso_size, and return EMSGSIZE instead of EINVAL on MTU/PMTU check failure to be more specific on the error cause. Fixes: 4094871db1d6 ("udp: only do GSO if # of segs > 1") Signed-off-by: Yan Zhai <yan(a)cloudflare.com> -- v1->v2: add a missing MTU check when fall back to no GSO mode suggested by Willem de Bruijn <willemdebruijn.kernel(a)gmail.com>; Fixed up commit message to be more precise. v1: https://lore.kernel.org/all/Z5cgWh%2F6bRQm9vVU@debian.debian/ --- net/ipv4/udp.c | 28 +++++++++++++++++++--------- net/ipv6/udp.c | 28 +++++++++++++++++++--------- tools/testing/selftests/net/udpgso.c | 14 ++++++++++++++ 3 files changed, 52 insertions(+), 18 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index c472c9a57cf6..0b5010238d05 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1141,9 +1141,20 @@ static int udp_send_skb(struct sk_buff *skb, struct flowi4 *fl4, const int hlen = skb_network_header_len(skb) + sizeof(struct udphdr); + if (datalen <= cork->gso_size) { + /* + * check MTU again: it's skipped previously when + * gso_size != 0 + */ + if (hlen + datalen > cork->fragsize) { + kfree_skb(skb); + return -EMSGSIZE; + } + goto no_gso; + } if (hlen + cork->gso_size > cork->fragsize) { kfree_skb(skb); - return -EINVAL; + return -EMSGSIZE; } if (datalen > cork->gso_size * UDP_MAX_SEGMENTS) { kfree_skb(skb); @@ -1158,17 +1169,16 @@ static int udp_send_skb(struct sk_buff *skb, struct flowi4 *fl4, return -EIO; } - if (datalen > cork->gso_size) { - skb_shinfo(skb)->gso_size = cork->gso_size; - skb_shinfo(skb)->gso_type = SKB_GSO_UDP_L4; - skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(datalen, - cork->gso_size); + skb_shinfo(skb)->gso_size = cork->gso_size; + skb_shinfo(skb)->gso_type = SKB_GSO_UDP_L4; + skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(datalen, + cork->gso_size); - /* Don't checksum the payload, skb will get segmented */ - goto csum_partial; - } + /* Don't checksum the payload, skb will get segmented */ + goto csum_partial; } +no_gso: if (is_udplite) /* UDP-Lite */ csum = udplite_csum(skb); diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 6671daa67f4f..d97befa7f80d 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1389,9 +1389,20 @@ static int udp_v6_send_skb(struct sk_buff *skb, struct flowi6 *fl6, const int hlen = skb_network_header_len(skb) + sizeof(struct udphdr); + if (datalen <= cork->gso_size) { + /* + * check MTU again: it's skipped previously when + * gso_size != 0 + */ + if (hlen + datalen > cork->fragsize) { + kfree_skb(skb); + return -EMSGSIZE; + } + goto no_gso; + } if (hlen + cork->gso_size > cork->fragsize) { kfree_skb(skb); - return -EINVAL; + return -EMSGSIZE; } if (datalen > cork->gso_size * UDP_MAX_SEGMENTS) { kfree_skb(skb); @@ -1406,17 +1417,16 @@ static int udp_v6_send_skb(struct sk_buff *skb, struct flowi6 *fl6, return -EIO; } - if (datalen > cork->gso_size) { - skb_shinfo(skb)->gso_size = cork->gso_size; - skb_shinfo(skb)->gso_type = SKB_GSO_UDP_L4; - skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(datalen, - cork->gso_size); + skb_shinfo(skb)->gso_size = cork->gso_size; + skb_shinfo(skb)->gso_type = SKB_GSO_UDP_L4; + skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(datalen, + cork->gso_size); - /* Don't checksum the payload, skb will get segmented */ - goto csum_partial; - } + /* Don't checksum the payload, skb will get segmented */ + goto csum_partial; } +no_gso: if (is_udplite) csum = udplite_csum(skb); else if (udp_get_no_check6_tx(sk)) { /* UDP csum disabled */ diff --git a/tools/testing/selftests/net/udpgso.c b/tools/testing/selftests/net/udpgso.c index 3f2fca02fec5..fb73f1c331fb 100644 --- a/tools/testing/selftests/net/udpgso.c +++ b/tools/testing/selftests/net/udpgso.c @@ -102,6 +102,13 @@ struct testcase testcases_v4[] = { .gso_len = CONST_MSS_V4, .r_num_mss = 1, }, + { + /* datalen <= MSS < gso_len: will fall back to no GSO */ + .tlen = CONST_MSS_V4, + .gso_len = CONST_MSS_V4 + 1, + .r_num_mss = 0, + .r_len_last = CONST_MSS_V4, + }, { /* send a single MSS + 1B */ .tlen = CONST_MSS_V4 + 1, @@ -205,6 +212,13 @@ struct testcase testcases_v6[] = { .gso_len = CONST_MSS_V6, .r_num_mss = 1, }, + { + /* datalen <= MSS < gso_len: will fall back to no GSO */ + .tlen = CONST_MSS_V6, + .gso_len = CONST_MSS_V6 + 1, + .r_num_mss = 0, + .r_len_last = CONST_MSS_V6, + }, { /* send a single MSS + 1B */ .tlen = CONST_MSS_V6 + 1, -- 2.30.2

2 months, 4 weeks

2
2
0 0

[RFC net-next 0/2] netdevgenl: Add an xsk attribute to queues

by Joe Damato

Greetings: This is an attempt to followup on something Jakub asked me about [1], adding an xsk attribute to queues and more clearly documenting which queues are linked to NAPIs... But: 1. I couldn't pick a good "thing" to expose as "xsk", so I chose 0 or 1. Happy to take suggestions on what might be better to expose for the xsk queue attribute. 2. I create a silly C helper program to create an XDP socket in order to add a new test to queues.py. I'm not particularly good at python programming, so there's probably a better way to do this. Notably, python does not seem to have a socket.AF_XDP, so I needed the C helper to make a socket and bind it to a queue to perform the test. Tested this on my mlx5 machine and the test seems to pass. Happy to take any suggestions / feedback on this one; sorry in advance if I missed many obvious better ways to do things. Thanks, Joe [1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/ Joe Damato (2): netdev-genl: Add an XSK attribute to queues selftests: drv-net: Test queue xsk attribute Documentation/netlink/specs/netdev.yaml | 10 ++- include/uapi/linux/netdev.h | 1 + net/core/netdev-genl.c | 6 ++ tools/include/uapi/linux/netdev.h | 1 + tools/testing/selftests/drivers/.gitignore | 1 + tools/testing/selftests/drivers/net/Makefile | 3 + tools/testing/selftests/drivers/net/queues.py | 32 ++++++- .../selftests/drivers/net/xdp_helper.c | 90 +++++++++++++++++++ 8 files changed, 141 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/xdp_helper.c base-commit: 0ad9617c78acbc71373fb341a6f75d4012b01d69 -- 2.25.1

2 months, 4 weeks

2
4
0 0

[PATCH v11 00/14] riscv: Add support for xtheadvector

by Charlie Jenkins

xtheadvector is a custom extension that is based upon riscv vector version 0.7.1 [1]. All of the vector routines have been modified to support this alternative vector version based upon whether xtheadvector was determined to be supported at boot. vlenb is not supported on the existing xtheadvector hardware, so a devicetree property thead,vlenb is added to provide the vlenb to Linux. There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is used to request which thead vendor extensions are supported on the current platform. This allows future vendors to allocate hwprobe keys for their vendor. Support for xtheadvector is also added to the vector kselftests. Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> [1] https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361… --- This series is a continuation of a different series that was fragmented into two other series in an attempt to get part of it merged in the 6.10 merge window. The split-off series did not get merged due to a NAK on the series that added the generic riscv,vlenb devicetree entry. This series has converted riscv,vlenb to thead,vlenb to remedy this issue. The original series is titled "riscv: Support vendor extensions and xtheadvector" [3]. I have tested this with an Allwinner Nezha board. I used SkiffOS [1] to manage building the image, but upgraded the U-Boot version to Samuel Holland's more up-to-date version [2] and changed out the device tree used by U-Boot with the device trees that are present in upstream linux and this series. Thank you Samuel for all of the work you did to make this task possible. [1] https://github.com/skiffos/SkiffOS/tree/master/configs/allwinner/nezha [2] https://github.com/smaeul/u-boot/commit/2e89b706f5c956a70c989cd31665f1429e9… [3] https://lore.kernel.org/all/20240503-dev-charlie-support_thead_vector_6_9-v… [4] https://lore.kernel.org/lkml/20240719-support_vendor_extensions-v3-4-0af758… --- Changes in v11: - Fix an issue where the mitigation was not being properly skipped when requested - Fix vstate_discard issue - Fix issue when -1 was passed into __riscv_isa_vendor_extension_available() - Remove some artifacts from being placed in the test directory - Link to v10: https://lore.kernel.org/r/20240911-xtheadvector-v10-0-8d3930091246@rivosinc… Changes in v10: - In DT probing disable vector with new function to clear vendor extension bits for xtheadvector - Add ghostwrite mitigations for c9xx CPUs. This disables xtheadvector unless mitigations=off is set as a kernel boot arg - Link to v9: https://lore.kernel.org/r/20240806-xtheadvector-v9-0-62a56d2da5d0@rivosinc.… Changes in v9: - Rebase onto palmer's for-next - Fix sparse error in arch/riscv/kernel/vendor_extensions/thead.c - Fix maybe-uninitialized warning in arch/riscv/include/asm/vendor_extensions/vendor_hwprobe.h - Wrap some long lines - Link to v8: https://lore.kernel.org/r/20240724-xtheadvector-v8-0-cf043168e137@rivosinc.… Changes in v8: - Rebase onto palmer's for-next - Link to v7: https://lore.kernel.org/r/20240724-xtheadvector-v7-0-b741910ada3e@rivosinc.… Changes in v7: - Add defs for has_xtheadvector_no_alternatives() and has_xtheadvector() when vector disabled. (Palmer) - Link to v6: https://lore.kernel.org/r/20240722-xtheadvector-v6-0-c9af0130fa00@rivosinc.… Changes in v6: - Fix return type of is_vector_supported()/is_xthead_supported() to be bool - Link to v5: https://lore.kernel.org/r/20240719-xtheadvector-v5-0-4b485fc7d55f@rivosinc.… Changes in v5: - Rebase on for-next - Link to v4: https://lore.kernel.org/r/20240702-xtheadvector-v4-0-2bad6820db11@rivosinc.… Changes in v4: - Replace inline asm with C (Samuel) - Rename VCSRs to CSRs (Samuel) - Replace .insn directives with .4byte directives - Link to v3: https://lore.kernel.org/r/20240619-xtheadvector-v3-0-bff39eb9668e@rivosinc.… Changes in v3: - Add back Heiko's signed-off-by (Conor) - Mark RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 as a bitmask - Link to v2: https://lore.kernel.org/r/20240610-xtheadvector-v2-0-97a48613ad64@rivosinc.… Changes in v2: - Removed extraneous references to "riscv,vlenb" (Jess) - Moved declaration of "thead,vlenb" into cpus.yaml and added restriction that it's only applicable to thead cores (Conor) - Check CONFIG_RISCV_ISA_XTHEADVECTOR instead of CONFIG_RISCV_ISA_V for thead,vlenb (Jess) - Fix naming of hwprobe variables (Evan) - Link to v1: https://lore.kernel.org/r/20240609-xtheadvector-v1-0-3fe591d7f109@rivosinc.… --- Charlie Jenkins (13): dt-bindings: riscv: Add xtheadvector ISA extension description dt-bindings: cpus: add a thead vlen register length property riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree riscv: Add thead and xtheadvector as a vendor extension riscv: vector: Use vlenb from DT for thead riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT riscv: Add xtheadvector instruction definitions riscv: vector: Support xtheadvector save/restore riscv: hwprobe: Add thead vendor extension probing riscv: hwprobe: Document thead vendor extensions and xtheadvector extension selftests: riscv: Fix vector tests selftests: riscv: Support xtheadvector in vector tests riscv: Add ghostwrite vulnerability Heiko Stuebner (1): RISC-V: define the elements of the VCSR vector CSR Documentation/arch/riscv/hwprobe.rst | 10 + Documentation/devicetree/bindings/riscv/cpus.yaml | 19 ++ .../devicetree/bindings/riscv/extensions.yaml | 10 + arch/riscv/Kconfig.errata | 11 + arch/riscv/Kconfig.vendor | 26 ++ arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 3 +- arch/riscv/errata/thead/errata.c | 28 ++ arch/riscv/include/asm/bugs.h | 22 ++ arch/riscv/include/asm/cpufeature.h | 2 + arch/riscv/include/asm/csr.h | 15 + arch/riscv/include/asm/errata_list.h | 3 +- arch/riscv/include/asm/hwprobe.h | 3 +- arch/riscv/include/asm/switch_to.h | 2 +- arch/riscv/include/asm/vector.h | 222 +++++++++++---- arch/riscv/include/asm/vendor_extensions/thead.h | 47 ++++ .../include/asm/vendor_extensions/thead_hwprobe.h | 19 ++ .../include/asm/vendor_extensions/vendor_hwprobe.h | 37 +++ arch/riscv/include/uapi/asm/hwprobe.h | 3 +- arch/riscv/include/uapi/asm/vendor/thead.h | 3 + arch/riscv/kernel/Makefile | 2 + arch/riscv/kernel/bugs.c | 60 ++++ arch/riscv/kernel/cpufeature.c | 59 +++- arch/riscv/kernel/kernel_mode_vector.c | 8 +- arch/riscv/kernel/process.c | 4 +- arch/riscv/kernel/signal.c | 6 +- arch/riscv/kernel/sys_hwprobe.c | 5 + arch/riscv/kernel/vector.c | 24 +- arch/riscv/kernel/vendor_extensions.c | 10 + arch/riscv/kernel/vendor_extensions/Makefile | 2 + arch/riscv/kernel/vendor_extensions/thead.c | 29 ++ .../riscv/kernel/vendor_extensions/thead_hwprobe.c | 19 ++ drivers/base/cpu.c | 3 + include/linux/cpu.h | 1 + tools/testing/selftests/riscv/vector/.gitignore | 3 +- tools/testing/selftests/riscv/vector/Makefile | 17 +- .../selftests/riscv/vector/v_exec_initval_nolibc.c | 94 +++++++ tools/testing/selftests/riscv/vector/v_helpers.c | 68 +++++ tools/testing/selftests/riscv/vector/v_helpers.h | 8 + tools/testing/selftests/riscv/vector/v_initval.c | 22 ++ .../selftests/riscv/vector/v_initval_nolibc.c | 68 ----- .../selftests/riscv/vector/vstate_exec_nolibc.c | 20 +- .../testing/selftests/riscv/vector/vstate_prctl.c | 305 +++++++++++++-------- 42 files changed, 1051 insertions(+), 271 deletions(-) --- base-commit: 0eb512779d642b21ced83778287a0f7a3ca8f2a1 change-id: 20240530-xtheadvector-833d3d17b423 -- - Charlie

2 months, 4 weeks

3
22
0 0

[PATCH bpf-next/net v2 0/7] bpf: Add mptcp_subflow bpf_iter support

by Matthieu Baerts (NGI0)

Here is a series from Geliang, adding mptcp_subflow bpf_iter support. We are working on extending MPTCP with BPF, e.g. to control the path manager -- in charge of the creation, deletion, and announcements of subflows (paths) -- and the packet scheduler -- in charge of selecting which available path the next data will be sent to. These extensions need to iterate over the list of subflows attached to an MPTCP connection, and do some specific actions via some new kfunc that will be added later on. This preparation work is split in different patches: - Patch 1: extend bpf_skc_to_mptcp_sock() to be called with msk. - Patch 2: allow using skc_to_mptcp_sock() in CGroup sockopt hooks. - Patch 3: register some "basic" MPTCP kfunc. - Patch 4: add mptcp_subflow bpf_iter support. Note that previous versions of this single patch have already been shared to the BPF mailing list. The changelog has been kept with a comment, but the version number has been reset to avoid confusions. - Patch 5: add kfunc to make sure the msk is valid - Patch 6: add more MPTCP endpoints in the selftests, in order to create more than 2 subflows. - Patch 7: add a very simple test validating mptcp_subflow bpf_iter support. This test could be written without the new bpf_iter, but it is there only to make sure this specific feature works as expected. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Changes in v2: - Patches 1-2: new ones. - Patch 3: remove two kfunc, more restrictions. (Martin) - Patch 4: add BUILD_BUG_ON(), more restrictions. (Martin) - Patch 7: adaptations due to modifications in patches 1-4. - Link to v1: https://lore.kernel.org/r/20241108-bpf-next-net-mptcp-bpf_iter-subflows-v1-… --- Geliang Tang (7): bpf: Extend bpf_skc_to_mptcp_sock to MPTCP sock bpf: Allow use of skc_to_mptcp_sock in cg_sockopt bpf: Register mptcp common kfunc set bpf: Add mptcp_subflow bpf_iter bpf: Acquire and release mptcp socket selftests/bpf: More endpoints for endpoint_init selftests/bpf: Add mptcp_subflow bpf_iter subtest include/net/mptcp.h | 4 +- kernel/bpf/cgroup.c | 2 + net/core/filter.c | 2 +- net/mptcp/bpf.c | 113 +++++++++++++++++- tools/testing/selftests/bpf/bpf_experimental.h | 8 ++ tools/testing/selftests/bpf/prog_tests/mptcp.c | 129 ++++++++++++++++++++- tools/testing/selftests/bpf/progs/mptcp_bpf.h | 9 ++ .../testing/selftests/bpf/progs/mptcp_bpf_iters.c | 63 ++++++++++ 8 files changed, 318 insertions(+), 12 deletions(-) --- base-commit: dad704ebe38642cd405e15b9c51263356391355c change-id: 20241108-bpf-next-net-mptcp-bpf_iter-subflows-027f6d87770e Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

2 months, 4 weeks

3
13
0 0

[PATCH] udp: gso: fix MTU check for small packets

by Yan Zhai

Commit 4094871db1d6 ("udp: only do GSO if # of segs > 1") avoided GSO for small packets. But the kernel currently dismisses GSO requests only after checking MTU on gso_size. This means any packets, regardless of their payload sizes, would be dropped when MTU is smaller than requested gso_size. Meanwhile, EINVAL would be returned in this case, making it very misleading to debug. Ideally, do not check any GSO related constraints when payload size is smaller than requested gso_size, and return EMSGSIZE on MTU check failure consistently for all packets to ease debugging. Fixes: 4094871db1d6 ("udp: only do GSO if # of segs > 1") Signed-off-by: Yan Zhai <yan(a)cloudflare.com> --- net/ipv4/udp.c | 18 ++++++++---------- net/ipv6/udp.c | 18 ++++++++---------- tools/testing/selftests/net/udpgso.c | 14 ++++++++++++++ 3 files changed, 30 insertions(+), 20 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index c472c9a57cf6..9aed1b4a871f 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1137,13 +1137,13 @@ static int udp_send_skb(struct sk_buff *skb, struct flowi4 *fl4, uh->len = htons(len); uh->check = 0; - if (cork->gso_size) { + if (cork->gso_size && datalen > cork->gso_size) { const int hlen = skb_network_header_len(skb) + sizeof(struct udphdr); if (hlen + cork->gso_size > cork->fragsize) { kfree_skb(skb); - return -EINVAL; + return -EMSGSIZE; } if (datalen > cork->gso_size * UDP_MAX_SEGMENTS) { kfree_skb(skb); @@ -1158,15 +1158,13 @@ static int udp_send_skb(struct sk_buff *skb, struct flowi4 *fl4, return -EIO; } - if (datalen > cork->gso_size) { - skb_shinfo(skb)->gso_size = cork->gso_size; - skb_shinfo(skb)->gso_type = SKB_GSO_UDP_L4; - skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(datalen, - cork->gso_size); + skb_shinfo(skb)->gso_size = cork->gso_size; + skb_shinfo(skb)->gso_type = SKB_GSO_UDP_L4; + skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(datalen, + cork->gso_size); - /* Don't checksum the payload, skb will get segmented */ - goto csum_partial; - } + /* Don't checksum the payload, skb will get segmented */ + goto csum_partial; } if (is_udplite) /* UDP-Lite */ diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 6671daa67f4f..6cdc8ce4c6f9 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1385,13 +1385,13 @@ static int udp_v6_send_skb(struct sk_buff *skb, struct flowi6 *fl6, uh->len = htons(len); uh->check = 0; - if (cork->gso_size) { + if (cork->gso_size && datalen > cork->gso_size) { const int hlen = skb_network_header_len(skb) + sizeof(struct udphdr); if (hlen + cork->gso_size > cork->fragsize) { kfree_skb(skb); - return -EINVAL; + return -EMSGSIZE; } if (datalen > cork->gso_size * UDP_MAX_SEGMENTS) { kfree_skb(skb); @@ -1406,15 +1406,13 @@ static int udp_v6_send_skb(struct sk_buff *skb, struct flowi6 *fl6, return -EIO; } - if (datalen > cork->gso_size) { - skb_shinfo(skb)->gso_size = cork->gso_size; - skb_shinfo(skb)->gso_type = SKB_GSO_UDP_L4; - skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(datalen, - cork->gso_size); + skb_shinfo(skb)->gso_size = cork->gso_size; + skb_shinfo(skb)->gso_type = SKB_GSO_UDP_L4; + skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(datalen, + cork->gso_size); - /* Don't checksum the payload, skb will get segmented */ - goto csum_partial; - } + /* Don't checksum the payload, skb will get segmented */ + goto csum_partial; } if (is_udplite) diff --git a/tools/testing/selftests/net/udpgso.c b/tools/testing/selftests/net/udpgso.c index 3f2fca02fec5..fb73f1c331fb 100644 --- a/tools/testing/selftests/net/udpgso.c +++ b/tools/testing/selftests/net/udpgso.c @@ -102,6 +102,13 @@ struct testcase testcases_v4[] = { .gso_len = CONST_MSS_V4, .r_num_mss = 1, }, + { + /* datalen <= MSS < gso_len: will fall back to no GSO */ + .tlen = CONST_MSS_V4, + .gso_len = CONST_MSS_V4 + 1, + .r_num_mss = 0, + .r_len_last = CONST_MSS_V4, + }, { /* send a single MSS + 1B */ .tlen = CONST_MSS_V4 + 1, @@ -205,6 +212,13 @@ struct testcase testcases_v6[] = { .gso_len = CONST_MSS_V6, .r_num_mss = 1, }, + { + /* datalen <= MSS < gso_len: will fall back to no GSO */ + .tlen = CONST_MSS_V6, + .gso_len = CONST_MSS_V6 + 1, + .r_num_mss = 0, + .r_len_last = CONST_MSS_V6, + }, { /* send a single MSS + 1B */ .tlen = CONST_MSS_V6 + 1, -- 2.30.2

2 months, 4 weeks

2
7
0 0

[PATCH v4 0/9] mm: workingset reporting

by Yuanchu Xie

This patch series provides workingset reporting of user pages in lruvecs, of which coldness can be tracked by accessed bits and fd references. However, the concept of workingset applies generically to all types of memory, which could be kernel slab caches, discardable userspace caches (databases), or CXL.mem. Therefore, data sources might come from slab shrinkers, device drivers, or the userspace. Another interesting idea might be hugepage workingset, so that we can measure the proportion of hugepages backing cold memory. However, with architectures like arm, there may be too many hugepage sizes leading to a combinatorial explosion when exporting stats to the userspace. Nonetheless, the kernel should provide a set of workingset interfaces that is generic enough to accommodate the various use cases, and extensible to potential future use cases. Use cases ========== Job scheduling On overcommitted hosts, workingset information improves efficiency and reliability by allowing the job scheduler to have better stats on the exact memory requirements of each job. This can manifest in efficiency by landing more jobs on the same host or NUMA node. On the other hand, the job scheduler can also ensure each node has a sufficient amount of memory and does not enter direct reclaim or the kernel OOM path. With workingset information and job priority, the userspace OOM killing or proactive reclaim policy can kick in before the system is under memory pressure. If the job shape is very different from the machine shape, knowing the workingset per-node can also help inform page allocation policies. Proactive reclaim Workingset information allows the a container manager to proactively reclaim memory while not impacting a job's performance. While PSI may provide a reactive measure of when a proactive reclaim has reclaimed too much, workingset reporting allows the policy to be more accurate and flexible. Ballooning (similar to proactive reclaim) The last patch of the series extends the virtio-balloon device to report the guest workingset. Balloon policies benefit from workingset to more precisely determine the size of the memory balloon. On end-user devices where memory is scarce and overcommitted, the balloon sizing in multiple VMs running on the same device can be orchestrated with workingset reports from each one. On the server side, workingset reporting allows the balloon controller to inflate the balloon without causing too much file cache to be reclaimed in the guest. Promotion/Demotion If different mechanisms are used for promition and demotion, workingset information can help connect the two and avoid pages being migrated back and forth. For example, given a promotion hot page threshold defined in reaccess distance of N seconds (promote pages accessed more often than every N seconds). The threshold N should be set so that ~80% (e.g.) of pages on the fast memory node passes the threshold. This calculation can be done with workingset reports. To be directly useful for promotion policies, the workingset report interfaces need to be extended to report hotness and gather hotness information from the devices[1]. [1] https://www.opencompute.org/documents/ocp-cms-hotness-tracking-requirements… Sysfs and Cgroup Interfaces ========== The interfaces are detailed in the patches that introduce them. The main idea here is we break down the workingset per-node per-memcg into time intervals (ms), e.g. 1000 anon=137368 file=24530 20000 anon=34342 file=0 30000 anon=353232 file=333608 40000 anon=407198 file=206052 9223372036854775807 anon=4925624 file=892892 Implementation ========== The reporting of user pages is based off of MGLRU, and therefore requires CONFIG_LRU_GEN=y. We would benefit from more MGLRU generations for a more fine-grained workingset report, but we can already gather a lot of data with just four generations. The workingset reporting mechanism is gated behind CONFIG_WORKINGSET_REPORT, and the aging thread is behind CONFIG_WORKINGSET_REPORT_AGING. Benchmarks ========== Ghait Ouled Amar Ben Cheikh has implemented a simple policy and ran Linux compile and redis benchmarks from openbenchmarking.org. The policy and runner is referred to as WMO (Workload Memory Optimization). The results were based on v3 of the series, but v4 doesn't change the core of the working set reporting and just adds the ballooning counterpart. The timed Linux kernel compilation benchmark shows improvements in peak memory usage with a policy of "swap out all bytes colder than 10 seconds every 40 seconds". A swapfile is configured on SSD. -------------------------------------------- peak memory usage (with WMO): 4982.61328 MiB peak memory usage (control): 9569.1367 MiB peak memory reduction: 47.9% -------------------------------------------- Benchmark | Experimental |Control | Experimental_Std_Dev | Control_Std_Dev Timed Linux Kernel Compilation - allmodconfig (sec) | 708.486 (95.91%) | 679.499 (100%) | 0.6% | 0.1% -------------------------------------------- Seconds, fewer is better The redis benchmark shows employs the same policy: -------------------------------------------- peak memory usage (with WMO): 375.9023 MiB peak memory usage (control): 509.765 MiB peak memory reduction: 26% -------------------------------------------- Benchmark | Experimental | Control | Experimental_Std_Dev | Control_Std_Dev Redis - LPOP (Reqs/sec) | 2023130 (98.22%) | 2059849 (100%) | 1.2% | 2% Redis - SADD (Reqs/sec) | 2539662 (98.63%) | 2574811 (100%) | 2.3% | 1.4% Redis - LPUSH (Reqs/sec)| 2024880 (100%) | 2000884 (98.81%) | 1.1% | 0.8% Redis - GET (Reqs/sec) | 2835764 (100%) | 2763722 (97.46%) | 2.7% | 1.6% Redis - SET (Reqs/sec) | 2340723 (100%) | 2327372 (99.43%) | 2.4% | 1.8% -------------------------------------------- Reqs/sec, more is better The detailed report and benchmarking results are in Ghait's repo: https://github.com/miloudi98/WMO Changelog ========== Changes from PATCH v3 -> v4: - Added documentation for cgroup-v2 (Waiman Long) - Fixed types in documentation (Randy Dunlap) - Added implementation for the ballooning use case - Added detailed description of benchmark results (Andrew Morton) Changes from PATCH v2 -> v3: - Fixed typos in commit messages and documentation (Lance Yang, Randy Dunlap) - Split out the force_scan patch to be reviewed separately - Added benchmarks from Ghait Ouled Amar Ben Cheikh - Fixed reported compile error without CONFIG_MEMCG Changes from PATCH v1 -> v2: - Updated selftest to use ksft_test_result_code instead of switch-case (Muhammad Usama Anjum) - Included more use cases in the cover letter (Huang, Ying) - Added documentation for sysfs and memcg interfaces - Added an aging-specific struct lru_gen_mm_walk in struct pglist_data to avoid allocating for each lruvec. [v1] https://lore.kernel.org/linux-mm/20240504073011.4000534-1-yuanchu@google.co… [v2] https://lore.kernel.org/linux-mm/20240604020549.1017540-1-yuanchu@google.co… [v3] https://lore.kernel.org/linux-mm/20240813165619.748102-1-yuanchu@google.com/ Yuanchu Xie (9): mm: aggregate workingset information into histograms mm: use refresh interval to rate-limit workingset report aggregation mm: report workingset during memory pressure driven scanning mm: extend workingset reporting to memcgs mm: add kernel aging thread for workingset reporting selftest: test system-wide workingset reporting Docs/admin-guide/mm/workingset_report: document sysfs and memcg interfaces Docs/admin-guide/cgroup-v2: document workingset reporting virtio-balloon: add workingset reporting Documentation/admin-guide/cgroup-v2.rst | 35 + Documentation/admin-guide/mm/index.rst | 1 + .../admin-guide/mm/workingset_report.rst | 105 +++ drivers/base/node.c | 6 + drivers/virtio/virtio_balloon.c | 390 ++++++++++- include/linux/balloon_compaction.h | 1 + include/linux/memcontrol.h | 21 + include/linux/mmzone.h | 13 + include/linux/workingset_report.h | 167 +++++ include/uapi/linux/virtio_balloon.h | 30 + mm/Kconfig | 15 + mm/Makefile | 2 + mm/internal.h | 19 + mm/memcontrol.c | 162 ++++- mm/mm_init.c | 2 + mm/mmzone.c | 2 + mm/vmscan.c | 56 +- mm/workingset_report.c | 653 ++++++++++++++++++ mm/workingset_report_aging.c | 127 ++++ tools/testing/selftests/mm/.gitignore | 1 + tools/testing/selftests/mm/Makefile | 3 + tools/testing/selftests/mm/run_vmtests.sh | 5 + .../testing/selftests/mm/workingset_report.c | 306 ++++++++ .../testing/selftests/mm/workingset_report.h | 39 ++ .../selftests/mm/workingset_report_test.c | 330 +++++++++ 25 files changed, 2482 insertions(+), 9 deletions(-) create mode 100644 Documentation/admin-guide/mm/workingset_report.rst create mode 100644 include/linux/workingset_report.h create mode 100644 mm/workingset_report.c create mode 100644 mm/workingset_report_aging.c create mode 100644 tools/testing/selftests/mm/workingset_report.c create mode 100644 tools/testing/selftests/mm/workingset_report.h create mode 100644 tools/testing/selftests/mm/workingset_report_test.c -- 2.47.0.338.g60cca15819-goog

2 months, 4 weeks

6
20
0 0

[PATCH bpf v9 0/5] bpf: fix wrong copied_seq calculation and add tests

by Jiayuan Chen

A previous commit described in this topic http://lore.kernel.org/bpf/20230523025618.113937-9-john.fastabend@gmail.com directly updated 'sk->copied_seq' in the tcp_eat_skb() function when the action of a BPF program was SK_REDIRECT. For other actions, like SK_PASS, the update logic for 'sk->copied_seq' was moved to tcp_bpf_recvmsg_parser() to ensure the accuracy of the 'fionread' feature. That commit works for a single stream_verdict scenario, as it also modified 'sk_data_ready->sk_psock_verdict_data_ready->tcp_read_skb' to remove updating 'sk->copied_seq'. However, for programs where both stream_parser and stream_verdict are active (strparser purpose), tcp_read_sock() was used instead of tcp_read_skb() (sk_data_ready->strp_data_ready->tcp_read_sock). tcp_read_sock() now still updates 'sk->copied_seq', leading to duplicated updates. In summary, for strparser + SK_PASS, copied_seq is redundantly calculated in both tcp_read_sock() and tcp_bpf_recvmsg_parser(). The issue causes incorrect copied_seq calculations, which prevent correct data reads from the recv() interface in user-land. Also we added test cases for bpf + strparser and separated them from sockmap_basic, as strparser has more encapsulation and parsing capabilities compared to sockmap. --- V8 -> v9 https://lore.kernel.org/bpf/20250121050707.55523-1-mrpre@163.com/ Fixed some issues suggested by Jakub Sitnicki. V7 -> V8 https://lore.kernel.org/bpf/20250116140531.108636-1-mrpre@163.com/ Avoid using add read_sock to psock. (Jakub Sitnicki) Avoid using warpper function to check whether strparser is supported. V3 -> V7: https://lore.kernel.org/bpf/20250109094402.50838-1-mrpre@163.com/ https://lore.kernel.org/bpf/20241218053408.437295-1-mrpre@163.com/ Avoid introducing new proto_ops. (Jakub Sitnicki). Add more edge test cases for strparser + bpf. Fix patchwork fail of test cases code. Fix psock fetch without rcu lock. Move code of modifying to tcp_bpf.c. V1 -> V3: https://lore.kernel.org/bpf/20241209152740.281125-1-mrpre@163.com/ Fix patchwork fail by adding Fixes tag. Save skb data offset for ENOMEM. (John Fastabend) --- Jiayuan Chen (5): strparser: add read_sock callback bpf: fix wrong copied_seq calculation bpf: disable non stream socket for strparser selftests/bpf: fix invalid flag of recv() selftests/bpf: add strparser test for bpf Documentation/networking/strparser.rst | 9 +- include/linux/skmsg.h | 2 + include/net/strparser.h | 2 + include/net/tcp.h | 8 + net/core/skmsg.c | 7 + net/core/sock_map.c | 5 +- net/ipv4/tcp.c | 29 +- net/ipv4/tcp_bpf.c | 36 ++ net/strparser/strparser.c | 11 +- .../selftests/bpf/prog_tests/sockmap_basic.c | 59 +-- .../selftests/bpf/prog_tests/sockmap_strp.c | 454 ++++++++++++++++++ .../selftests/bpf/progs/test_sockmap_strp.c | 53 ++ 12 files changed, 610 insertions(+), 65 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/sockmap_strp.c create mode 100644 tools/testing/selftests/bpf/progs/test_sockmap_strp.c -- 2.43.5

2 months, 4 weeks

4
13
0 0

[PATCH 0/6] Address some issues related to Python version

by Mauro Carvalho Chehab

This series remove compatibility with Python 2.x from scripts that have some backward compatibility logic on it. The rationale is that, since commit 627395716cc3 ("docs: document python version used for compilation"), the minimal Python version was set to 3.x. Also, Python 2.x is EOL since Jan, 2020. Patch 1: fix a script that was compatible only with Python 2.x; Patches 2-4: remove backward-compat code; Patches 5-6 solves forward-compat with modern Python which warns about using raw strings without using "r" format. Mauro Carvalho Chehab (6): docs: trace: decode_msr.py: make it compatible with python 3 tools: perf: exported-sql-viewer: drop support for Python 2 tools: perf: tools: perf: exported-sql-viewer: drop support for Python 2 tools: perf: task-analyzer: drop support for Python 2 tools: selftests/bpf: test_bpftool_synctypes: escape raw symbols comedi: convert_csv_to_c.py: use r-string for a regex expression Documentation/trace/postprocess/decode_msr.py | 2 +- .../ni_routing/tools/convert_csv_to_c.py | 2 +- .../scripts/python/exported-sql-viewer.py | 5 ++-- tools/perf/scripts/python/task-analyzer.py | 23 ++++---------- tools/perf/tests/shell/lib/attr.py | 6 +--- .../selftests/bpf/test_bpftool_synctypes.py | 30 +++++++++---------- 6 files changed, 25 insertions(+), 43 deletions(-) -- 2.48.1

2 months, 4 weeks

2
2
0 0

[PATCH v3 0/6] ptrace: introduce PTRACE_SET_SYSCALL_INFO API

by Dmitry V. Levin

PTRACE_SET_SYSCALL_INFO is a generic ptrace API that complements PTRACE_GET_SYSCALL_INFO by letting the ptracer modify details of system calls the tracee is blocked in. This API allows ptracers to obtain and modify system call details in a straightforward and architecture-agnostic way. Current implementation supports changing only those bits of system call information that are used by strace, namely, syscall number, syscall arguments, and syscall return value. Support of changing additional details returned by PTRACE_GET_SYSCALL_INFO, such as instruction pointer and stack pointer, could be added later if needed, by using struct ptrace_syscall_info.flags to specify the additional details that should be set. Currently, "flags", "reserved", and "seccomp.reserved2" fields of struct ptrace_syscall_info must be initialized with zeroes; "arch", "instruction_pointer", and "stack_pointer" fields are ignored. PTRACE_SET_SYSCALL_INFO currently supports only PTRACE_SYSCALL_INFO_ENTRY, PTRACE_SYSCALL_INFO_EXIT, and PTRACE_SYSCALL_INFO_SECCOMP operations. Other operations could be added later if needed. Ideally, PTRACE_SET_SYSCALL_INFO should have been introduced along with PTRACE_GET_SYSCALL_INFO, but it didn't happen. The last straw that convinced me to implement PTRACE_SET_SYSCALL_INFO was apparent failure to provide an API of changing the first system call argument on riscv architecture [1]. ptrace(2) man page: long ptrace(enum __ptrace_request request, pid_t pid, void *addr, void *data); ... PTRACE_SET_SYSCALL_INFO Modify information about the system call that caused the stop. The "data" argument is a pointer to struct ptrace_syscall_info that specifies the system call information to be set. The "addr" argument should be set to sizeof(struct ptrace_syscall_info)). [1] https://lore.kernel.org/all/59505464-c84a-403d-972f-d4b2055eeaac@gmail.com/ Notes: v3: * powerpc: Submit syscall_set_return_value fix for "sc" case separately * mips: Do not introduce erroneous argument truncation on mips n32, add a detailed description to the commit message of the mips_get_syscall_arg change * ptrace: Add explicit padding to the end of struct ptrace_syscall_info, simplify obtaining of user ptrace_syscall_info, do not introduce PTRACE_SYSCALL_INFO_SIZE_VER0 * ptrace: Change the return type of ptrace_set_syscall_info_* functions from "unsigned long" to "int" * ptrace: Add -ERANGE check to ptrace_set_syscall_info_exit, add comments to -ERANGE checks * ptrace: Update comments about supported syscall stops * selftests: Extend set_syscall_info test, fix for mips n32 * Add Tested-by and Reviewed-by v2: * Add patch to fix syscall_set_return_value() on powerpc * Add patch to fix mips_get_syscall_arg() on mips * Add syscall_set_return_value() implementation on hexagon * Add syscall_set_return_value() invocation to syscall_set_nr() on arm and arm64. * Fix syscall_set_nr() and mips_set_syscall_arg() on mips * Add a comment to syscall_set_nr() on arc, powerpc, s390, sh, and sparc * Remove redundant ptrace_syscall_info.op assignments in ptrace_get_syscall_info_* * Minor style tweaks in ptrace_get_syscall_info_op() * Remove syscall_set_return_value() invocation from ptrace_set_syscall_info_entry() * Skip syscall_set_arguments() invocation in case of syscall number -1 in ptrace_set_syscall_info_entry() * Split ptrace_syscall_info.reserved into ptrace_syscall_info.reserved and ptrace_syscall_info.flags * Use __kernel_ulong_t instead of unsigned long in set_syscall_info test Dmitry V. Levin (6): mips: fix mips_get_syscall_arg() for o32 syscall.h: add syscall_set_arguments() and syscall_set_return_value() syscall.h: introduce syscall_set_nr() ptrace_get_syscall_info: factor out ptrace_get_syscall_info_op ptrace: introduce PTRACE_SET_SYSCALL_INFO request selftests/ptrace: add a test case for PTRACE_SET_SYSCALL_INFO arch/arc/include/asm/syscall.h | 25 + arch/arm/include/asm/syscall.h | 37 ++ arch/arm64/include/asm/syscall.h | 29 + arch/csky/include/asm/syscall.h | 13 + arch/hexagon/include/asm/syscall.h | 21 + arch/loongarch/include/asm/syscall.h | 15 + arch/m68k/include/asm/syscall.h | 7 + arch/microblaze/include/asm/syscall.h | 7 + arch/mips/include/asm/syscall.h | 70 ++- arch/nios2/include/asm/syscall.h | 16 + arch/openrisc/include/asm/syscall.h | 13 + arch/parisc/include/asm/syscall.h | 19 + arch/powerpc/include/asm/syscall.h | 20 + arch/riscv/include/asm/syscall.h | 16 + arch/s390/include/asm/syscall.h | 24 + arch/sh/include/asm/syscall_32.h | 24 + arch/sparc/include/asm/syscall.h | 22 + arch/um/include/asm/syscall-generic.h | 19 + arch/x86/include/asm/syscall.h | 43 ++ arch/xtensa/include/asm/syscall.h | 18 + include/asm-generic/syscall.h | 30 + include/uapi/linux/ptrace.h | 7 +- kernel/ptrace.c | 179 +++++- tools/testing/selftests/ptrace/Makefile | 2 +- .../selftests/ptrace/set_syscall_info.c | 514 ++++++++++++++++++ 25 files changed, 1143 insertions(+), 47 deletions(-) create mode 100644 tools/testing/selftests/ptrace/set_syscall_info.c -- ldv

2 months, 4 weeks

2
2
0 0

[PATCH v3 0/9] x86/module: rework ROX cache to avoid writable copy

by Mike Rapoport

From: "Mike Rapoport (Microsoft)" <rppt(a)kernel.org> Hi, Following Peter's comments [1] these patches rework handling of ROX caches for module text allocations. Instead of using a writable copy that really complicates alternatives patching, temporarily remap parts of a large ROX page as RW for the time of module formation and then restore it's ROX protections when the module is ready. To keep the ROX memory mapped with large pages, make set_memory_rox() capable of restoring large pages (more details are in patch 3). Since this is really about x86, I believe this should go in via tip tree. The patches also available in git https://git.kernel.org/rppt/h/execmem/x86-rox/v10 v3 changes: * instead of adding a new module state handle ROX restoration locally in load_module() as Petr suggested v2: https://lore.kernel.org/all/20250121095739.986006-1-rppt@kernel.org * only collapse large mappings in set_memory_rox() * simplify RW <-> ROX remapping * don't remove ROX cache pages from the direct map (patch 4) v1: https://lore.kernel.org/all/20241227072825.1288491-1-rppt@kernel.org [1] https://lore.kernel.org/all/20241209083818.GK8562@noisy.programming.kicks-a… Kirill A. Shutemov (1): x86/mm/pat: restore large ROX pages after fragmentation Mike Rapoport (Microsoft) (8): x86/mm/pat: cpa-test: fix length for CPA_ARRAY test x86/mm/pat: drop duplicate variable in cpa_flush() execmem: don't remove ROX cache from the direct map execmem: add API for temporal remapping as RW and restoring ROX afterwards module: switch to execmem API for remapping as RW and restoring ROX Revert "x86/module: prepare module loading for ROX allocations of text" module: drop unused module_writable_address() x86: re-enable EXECMEM_ROX support arch/um/kernel/um_arch.c | 11 +- arch/x86/Kconfig | 1 + arch/x86/entry/vdso/vma.c | 3 +- arch/x86/include/asm/alternative.h | 14 +- arch/x86/include/asm/pgtable_types.h | 2 + arch/x86/kernel/alternative.c | 181 +++++++++------------- arch/x86/kernel/ftrace.c | 30 ++-- arch/x86/kernel/module.c | 45 ++---- arch/x86/mm/pat/cpa-test.c | 2 +- arch/x86/mm/pat/set_memory.c | 220 ++++++++++++++++++++++++++- include/linux/execmem.h | 31 ++++ include/linux/module.h | 16 -- include/linux/moduleloader.h | 4 - include/linux/vm_event_item.h | 2 + kernel/module/main.c | 78 +++------- kernel/module/strict_rwx.c | 9 +- mm/execmem.c | 39 +++-- mm/vmstat.c | 2 + 18 files changed, 422 insertions(+), 268 deletions(-) base-commit: ffd294d346d185b70e28b1a28abe367bbfe53c04 -- 2.45.2

2 months, 4 weeks

4
14
0 0

[PATCH v5 0/9] Basic SEV-SNP Selftests

by Pratik R. Sampat

This patch series extends the sev_init2 and the sev_smoke test to exercise the SEV-SNP VM launch workflow. Primarily, it introduces the architectural defines, its support in the SEV library and extends the tests to interact with the SEV-SNP ioctl() wrappers. Patch 1 - Do not advertize SNP on incompatible firmware Patch 2 - Remove SEV support on platform init failure Patch 3 - SNP test for KVM_SEV_INIT2 Patch 4 - Add VMGEXIT helper Patch 5 - Introduce SEV+ VM type check Patch 6 - SNP iotcl() plumbing for the SEV library Patch 7 - Force set GUEST_MEMFD for SNP Patch 8 - Cleanups of smoke test - Decouple policy from type Patch 9 - SNP smoke test The series is based on git.kernel.org/pub/scm/virt/kvm/kvm.git next v4..v5: * Introduced a check to disable advertising support for SEV, SEV-ES and SNP when platform initialization fails (Nikunj) * Remove the redundant SNP check within is_sev_vm() (Nikunj) * Cleanup of the encrypt_region flow for better readability (Nikunj) * Refactor paths to use the canonical $(ARCH) to rebase for kvm/next v3..v4: https://lore.kernel.org/kvm/20241114234104.128532-1-pratikrajesh.sampat@amd… * Remove SNP FW API version check in the test and ensure the KVM capability advertizes the presence of the feature. Retain the minimum version definitions to exercise these API versions in the smoke test * Retained only the SNP smoke test and SNP_INIT2 test * The SNP architectural defined merged with SNP_INIT2 test patch * SNP shutdown merged with SNP smoke test patch * Add SEV VM type check to abstract comparisons and reduce clutter * Define a SNP default policy which sets bits based on the presence of SMT * Decouple privatization and encryption for it to be SNP agnostic * Assert for only positive tests using vm_ioctl() * Dropped tested-by tags In summary - based on comments from Sean, I have primarily reduced the scope of this patch series to focus on breaking down the SNP smoke test patch (v3 - patch2) to first introduce SEV-SNP support and use this interface to extend the sev_init2 and the sev_smoke test. The rest of the v3 patchset that introduces ioctl, pre fault, fallocate and negative tests, will be re-worked and re-introduced subsequently in future patch series post addressing the issues discussed. v2..v3: https://lore.kernel.org/kvm/20240905124107.6954-1-pratikrajesh.sampat@amd.c… * Remove the assignments for the prefault and fallocate test type enums. * Fix error message for sev launch measure and finish. * Collect tested-by tags [Peter, Srikanth] Pratik R. Sampat (9): KVM: SEV: Disable SEV-SNP on FW validation failure KVM: SEV: Disable SEV on platform init failure KVM: selftests: SEV-SNP test for KVM_SEV_INIT2 KVM: selftests: Add VMGEXIT helper KVM: selftests: Introduce SEV VM type check KVM: selftests: Add library support for interacting with SNP KVM: selftests: Force GUEST_MEMFD flag for SNP VM type KVM: selftests: Abstractions for SEV to decouple policy from type KVM: selftests: Add a basic SEV-SNP smoke test arch/x86/kvm/svm/sev.c | 6 +- drivers/crypto/ccp/sev-dev.c | 16 +++ include/linux/psp-sev.h | 6 ++ .../selftests/kvm/include/x86/processor.h | 1 + tools/testing/selftests/kvm/include/x86/sev.h | 55 ++++++++++- tools/testing/selftests/kvm/lib/kvm_util.c | 7 +- .../testing/selftests/kvm/lib/x86/processor.c | 4 +- tools/testing/selftests/kvm/lib/x86/sev.c | 99 ++++++++++++++++++- .../selftests/kvm/x86/sev_init2_tests.c | 13 +++ .../selftests/kvm/x86/sev_smoke_test.c | 96 ++++++++++++++---- 10 files changed, 272 insertions(+), 31 deletions(-) -- 2.43.0

2 months, 4 weeks

6
16
0 0

[PATCH] selftests: Fix typos and grammar in multiple test files

by Miguel García

Signed-off-by: Miguel García <miguelgarciaroman8(a)gmail.com> --- tools/testing/selftests/alsa/mixer-test.c | 2 +- tools/testing/selftests/arm64/gcs/libc-gcs.c | 2 +- tools/testing/selftests/cgroup/test_cpuset.c | 2 +- tools/testing/selftests/mm/gup_longterm.c | 2 +- tools/testing/selftests/mm/mseal_test.c | 2 +- tools/testing/selftests/mm/protection_keys.c | 4 ++-- tools/testing/selftests/mm/test_vmalloc.sh | 2 +- tools/testing/selftests/mount_setattr/mount_setattr_test.c | 2 +- .../pmu/event_code_tests/group_constraint_thresh_sel_test.c | 4 ++-- tools/testing/selftests/safesetid/safesetid-test.c | 2 +- 10 files changed, 12 insertions(+), 12 deletions(-) diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c index 2a4b2662035e..dc7b290fc4ad 100644 --- a/tools/testing/selftests/alsa/mixer-test.c +++ b/tools/testing/selftests/alsa/mixer-test.c @@ -685,7 +685,7 @@ static int write_and_verify(struct ctl_data *ctl, } /* - * Use the libray to compare values, if there's a mismatch + * Use the library to compare values, if there's a mismatch * carry on and try to provide a more useful diagnostic than * just "mismatch". */ diff --git a/tools/testing/selftests/arm64/gcs/libc-gcs.c b/tools/testing/selftests/arm64/gcs/libc-gcs.c index 17b2fabfec38..482e1c634a65 100644 --- a/tools/testing/selftests/arm64/gcs/libc-gcs.c +++ b/tools/testing/selftests/arm64/gcs/libc-gcs.c @@ -129,7 +129,7 @@ TEST(gcs_find_terminator) * We can access a GCS via ptrace * * This could usefully have a fixture but note that each test is - * fork()ed into a new child whcih causes issues. Might be better to + * fork()ed into a new child which causes issues. Might be better to * lift at least some of this out into a separate, non-harness, test * program. */ diff --git a/tools/testing/selftests/cgroup/test_cpuset.c b/tools/testing/selftests/cgroup/test_cpuset.c index 4034d14ba69a..3f802e3e8480 100644 --- a/tools/testing/selftests/cgroup/test_cpuset.c +++ b/tools/testing/selftests/cgroup/test_cpuset.c @@ -160,7 +160,7 @@ static int test_cpuset_perms_object_deny(const char *root) } /* - * Migrate a process between parent and child implicitely + * Migrate a process between parent and child implicitly * Implicit migration happens when a controller is enabled/disabled. * */ diff --git a/tools/testing/selftests/mm/gup_longterm.c b/tools/testing/selftests/mm/gup_longterm.c index 9423ad439a61..d2dc3b59a084 100644 --- a/tools/testing/selftests/mm/gup_longterm.c +++ b/tools/testing/selftests/mm/gup_longterm.c @@ -154,7 +154,7 @@ static void do_test(int fd, size_t size, enum test_type type, bool shared) /* * R/O pinning or pinning in a private mapping is always * expected to work. Otherwise, we expect long-term R/W pinning - * to only succeed for special fielesystems. + * to only succeed for special filesystems. */ should_work = !shared || !rw || fs_supports_writable_longterm_pinning(fs_type); diff --git a/tools/testing/selftests/mm/mseal_test.c b/tools/testing/selftests/mm/mseal_test.c index 01675c412b2a..2ec2c5aea44a 100644 --- a/tools/testing/selftests/mm/mseal_test.c +++ b/tools/testing/selftests/mm/mseal_test.c @@ -732,7 +732,7 @@ static void test_seal_mprotect_two_vma_with_split(bool seal) else FAIL_TEST_IF_FALSE(!ret); - /* the fouth page is not sealed. */ + /* the fourth page is not sealed. */ ret = sys_mprotect(ptr + 3 * page_size, page_size, PROT_READ | PROT_WRITE); FAIL_TEST_IF_FALSE(!ret); diff --git a/tools/testing/selftests/mm/protection_keys.c b/tools/testing/selftests/mm/protection_keys.c index 4990f7ab4cb7..fcac7bb26b7a 100644 --- a/tools/testing/selftests/mm/protection_keys.c +++ b/tools/testing/selftests/mm/protection_keys.c @@ -900,7 +900,7 @@ void expected_pkey_fault(int pkey) #if defined(__i386__) || defined(__x86_64__) /* arch */ /* - * The signal handler shold have cleared out PKEY register to let the + * The signal handler should have cleared out PKEY register to let the * test program continue. We now have to restore it. */ if (__read_pkey_reg() != 0) @@ -1372,7 +1372,7 @@ void test_ptrace_of_child(int *ptr, u16 pkey) long ret; int status; /* - * This is the "control" for our little expermient. Make sure + * This is the "control" for our little experiment. Make sure * we can always access it when ptracing. */ int *plain_ptr_unaligned = malloc(HPAGE_SIZE); diff --git a/tools/testing/selftests/mm/test_vmalloc.sh b/tools/testing/selftests/mm/test_vmalloc.sh index d73b846736f1..2d4b3e0a6a17 100755 --- a/tools/testing/selftests/mm/test_vmalloc.sh +++ b/tools/testing/selftests/mm/test_vmalloc.sh @@ -21,7 +21,7 @@ ksft_skip=4 # # Static templates for performance, stressing and smoke tests. -# Also it is possible to pass any supported parameters manualy. +# Also it is possible to pass any supported parameters manually. # PERF_PARAM="sequential_test_order=1 test_repeat_count=3" SMOKE_PARAM="test_loop_count=10000 test_repeat_count=10" diff --git a/tools/testing/selftests/mount_setattr/mount_setattr_test.c b/tools/testing/selftests/mount_setattr/mount_setattr_test.c index 70f65eb320a7..a6d9f7bd1443 100644 --- a/tools/testing/selftests/mount_setattr/mount_setattr_test.c +++ b/tools/testing/selftests/mount_setattr/mount_setattr_test.c @@ -682,7 +682,7 @@ TEST_F(mount_setattr, mount_has_writers) ASSERT_GE(fd, 0); /* - * We're holding a fd open to a mount somwhere in the middle so this + * We're holding a fd open to a mount somewhere in the middle so this * needs to fail somewhere in the middle. After this the mount options * need to be unchanged. */ diff --git a/tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_thresh_sel_test.c b/tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_thresh_sel_test.c index 50a8cd843ce7..1b1336c1ddb1 100644 --- a/tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_thresh_sel_test.c +++ b/tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_thresh_sel_test.c @@ -34,7 +34,7 @@ static int group_constraint_thresh_sel(void) /* Check for platform support for the test */ SKIP_IF(platform_check_for_tests()); - /* Init the events for the group contraint thresh select test */ + /* Init the events for the group constraint thresh select test */ event_init(&leader, EventCode_1); FAIL_IF(event_open(&leader)); @@ -45,7 +45,7 @@ static int group_constraint_thresh_sel(void) event_close(&event); - /* Init the event for the group contraint thresh select test */ + /* Init the event for the group constraint thresh select test */ event_init(&event, EventCode_3); /* Expected to succeed as sibling and leader event request same thresh_sel bits */ diff --git a/tools/testing/selftests/safesetid/safesetid-test.c b/tools/testing/selftests/safesetid/safesetid-test.c index eb9bf0aee951..80f736d545a9 100644 --- a/tools/testing/selftests/safesetid/safesetid-test.c +++ b/tools/testing/selftests/safesetid/safesetid-test.c @@ -19,7 +19,7 @@ /* * NOTES about this test: - * - requries libcap-dev to be installed on test system + * - requires libcap-dev to be installed on test system * - requires securityfs to me mounted at /sys/kernel/security, e.g.: * mount -n -t securityfs -o nodev,noexec,nosuid securityfs /sys/kernel/security * - needs CONFIG_SECURITYFS and CONFIG_SAFESETID to be enabled -- 2.34.1

2 months, 4 weeks

1
0
0 0

[PATCH AUTOSEL 6.12 4/8] kunit: platform: Resolve 'struct completion' warning

by Sasha Levin

From: Brian Norris <briannorris(a)chromium.org> [ Upstream commit 7687c66c18c66d4ccd9949c6f641c0e7b5773483 ] If the <kunit/platform_device.h> header is included in a test without certain other headers, it produces compiler warnings like: In file included from [...] ../include/kunit/platform_device.h:15:57: warning: ‘struct completion’ declared inside parameter list will not be visible outside of this definition or declaration 15 | struct completion *x); | ^~~~~~~~~~ Add a 'struct completion' forward declaration to resolve this. Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412241958.dbAImJsA-lkp@intel.com/ Signed-off-by: Brian Norris <briannorris(a)chromium.org> Reviewed-by: David Gow <davidgow(a)google.com> Link: https://lore.kernel.org/r/20241213180841.3023843-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- include/kunit/platform_device.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/kunit/platform_device.h b/include/kunit/platform_device.h index 0fc0999d2420a..f8236a8536f7e 100644 --- a/include/kunit/platform_device.h +++ b/include/kunit/platform_device.h @@ -2,6 +2,7 @@ #ifndef _KUNIT_PLATFORM_DRIVER_H #define _KUNIT_PLATFORM_DRIVER_H +struct completion; struct kunit; struct platform_device; struct platform_driver; -- 2.39.5

2 months, 4 weeks

1
0
0 0

[PATCH AUTOSEL 6.13 4/8] kunit: platform: Resolve 'struct completion' warning

by Sasha Levin

From: Brian Norris <briannorris(a)chromium.org> [ Upstream commit 7687c66c18c66d4ccd9949c6f641c0e7b5773483 ] If the <kunit/platform_device.h> header is included in a test without certain other headers, it produces compiler warnings like: In file included from [...] ../include/kunit/platform_device.h:15:57: warning: ‘struct completion’ declared inside parameter list will not be visible outside of this definition or declaration 15 | struct completion *x); | ^~~~~~~~~~ Add a 'struct completion' forward declaration to resolve this. Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412241958.dbAImJsA-lkp@intel.com/ Signed-off-by: Brian Norris <briannorris(a)chromium.org> Reviewed-by: David Gow <davidgow(a)google.com> Link: https://lore.kernel.org/r/20241213180841.3023843-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- include/kunit/platform_device.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/kunit/platform_device.h b/include/kunit/platform_device.h index 0fc0999d2420a..f8236a8536f7e 100644 --- a/include/kunit/platform_device.h +++ b/include/kunit/platform_device.h @@ -2,6 +2,7 @@ #ifndef _KUNIT_PLATFORM_DRIVER_H #define _KUNIT_PLATFORM_DRIVER_H +struct completion; struct kunit; struct platform_device; struct platform_driver; -- 2.39.5

2 months, 4 weeks

1
0
0 0

[PATCH v2 0/5] kci-gitlab: Introducing GitLab-CI Pipeline for Kernel Testing

by Vignesh Raman

This patch series introduces "kci-gitlab," a GitLab CI pipeline specifically designed for kernel testing. It provides kernel developers with an integrated, efficient, and flexible testing framework using GitLab's CI/CD capabilities. This patch includes a .gitlab-ci file in the tools/ci/gitlab-ci/ folder, along with additional YAML and script files, to define a basic test pipeline triggered by code pushes to a GitLab-CI instance. The initial version implements: - Static checks: Includes checkpatch and smatch for code validation. - Build tests: Covers various architectures and configurations. - Boot tests: Utilizes virtme for basic boot testing. Additionally, it introduces a flexible "scenarios" mechanism to support subsystem-specific extensions. This series also introduces a drm scenario that adds a job to run IGT tests for vkms. This scenario includes helper scripts to build deqp-runner and IGT, leveraging approaches from the drm-ci/mesa-ci project. We are working towards creating a generic, upstream GitLab-CI pipeline (kci-gitlab) that will replace DRM-CI [1]. The proposed GitLab-CI pipeline is designed with a distributed infrastructure model, making it possible to run on any gitLab instance. We plan to leverage KernelCI [2] as the backend, utilizing its hardware, rootfs, test plans, and KCIDB [3] integration. For an example of a fully executed pipeline with drm scenario set, including documentation generation, see: https://gitlab.freedesktop.org/vigneshraman/kernel/-/pipelines/1350262 Please refer to the documentation included in the patch, or check the rendered version, here: https://vigneshraman.pages.freedesktop.org/-/kernel/-/jobs/69787927/artifac… Differences from v1 to v2: - moved to tools/ci as suggested by Linus on the previous version - add arm64 containers for native compilation - added boot tests using virtme: this is the base structure for boot tests, next steps would be adding other tests such as kselftests/kunit tests - added DRM scenario testing on vkms: this should replace current vkms test in drm-ci. This work shows how a test scenario can be used by different subsystems to add their tests. - update documentation For more details on the motivation behind this work, please refer to the cover letter of v1: https://patchwork.kernel.org/project/linux-kselftest/cover/20240228225527.1… [1] https://www.collabora.com/news-and-blog/blog/2024/02/08/drm-ci-a-gitlab-ci-… [2] https://kernelci.org/ [3] https://docs.kernelci.org/kcidb/ Helen Koike (3): kci-gitlab: Introducing GitLab-CI Pipeline for Kernel Testing kci-gitlab: Add documentation kci-gitlab: docs: Add images Vignesh Raman (2): MAINTAINERS: Add an entry for ci automated testing kci-gitlab: Add drm scenario Documentation/ci/gitlab-ci/gitlab-ci.rst | 471 ++++++++++ .../ci/gitlab-ci/images/drm-vkms.png | Bin 0 -> 73810 bytes .../ci/gitlab-ci/images/job-matrix.png | Bin 0 -> 20000 bytes .../gitlab-ci/images/new-project-runner.png | Bin 0 -> 607737 bytes .../ci/gitlab-ci/images/pipelines-on-push.png | Bin 0 -> 532143 bytes .../ci/gitlab-ci/images/the-pipeline.png | Bin 0 -> 62464 bytes .../ci/gitlab-ci/images/variables.png | Bin 0 -> 277518 bytes Documentation/index.rst | 7 + MAINTAINERS | 10 + tools/ci/gitlab-ci/arm_cross_compile.yml | 9 + tools/ci/gitlab-ci/arm_native_compile.yml | 20 + tools/ci/gitlab-ci/bootstrap-gitlab-runner.sh | 55 ++ tools/ci/gitlab-ci/build.yml | 43 + tools/ci/gitlab-ci/cache.yml | 24 + tools/ci/gitlab-ci/ci-scripts/build-docs.sh | 35 + tools/ci/gitlab-ci/ci-scripts/build-kernel.sh | 43 + .../ci/gitlab-ci/ci-scripts/ici-functions.sh | 106 +++ .../ci/gitlab-ci/ci-scripts/install-smatch.sh | 13 + .../ci-scripts/parse_commit_message.sh | 27 + .../ci/gitlab-ci/ci-scripts/run-checkpatch.sh | 20 + tools/ci/gitlab-ci/ci-scripts/run-smatch.sh | 45 + tools/ci/gitlab-ci/ci-scripts/run-virtme.sh | 52 ++ tools/ci/gitlab-ci/ci-scripts/test-boot.sh | 14 + tools/ci/gitlab-ci/container.yml | 114 +++ tools/ci/gitlab-ci/docker-compose.yaml | 18 + tools/ci/gitlab-ci/gitlab-ci.yml | 72 ++ tools/ci/gitlab-ci/scenarios.yml | 15 + .../scenarios/drm/build-deqp-runner.sh | 42 + tools/ci/gitlab-ci/scenarios/drm/build-igt.sh | 80 ++ .../ci/gitlab-ci/scenarios/drm/build-rust.sh | 42 + .../scenarios/drm/create-cross-file.sh | 65 ++ tools/ci/gitlab-ci/scenarios/drm/drm.yml | 44 + .../scenarios/drm/prepare-container.sh | 18 + tools/ci/gitlab-ci/scenarios/drm/run-igt.sh | 83 ++ tools/ci/gitlab-ci/scenarios/drm/test.yml | 32 + .../scenarios/drm/xfails/vkms-none-fails.txt | 22 + .../scenarios/drm/xfails/vkms-none-flakes.txt | 90 ++ .../scenarios/drm/xfails/vkms-none-skips.txt | 812 ++++++++++++++++++ .../scenarios/file-systems/file-systems.yml | 11 + tools/ci/gitlab-ci/scenarios/media/media.yml | 11 + .../gitlab-ci/scenarios/network/network.yml | 11 + tools/ci/gitlab-ci/static-checks.yml | 21 + tools/ci/gitlab-ci/test.yml | 16 + 43 files changed, 2613 insertions(+) create mode 100644 Documentation/ci/gitlab-ci/gitlab-ci.rst create mode 100644 Documentation/ci/gitlab-ci/images/drm-vkms.png create mode 100644 Documentation/ci/gitlab-ci/images/job-matrix.png create mode 100644 Documentation/ci/gitlab-ci/images/new-project-runner.png create mode 100644 Documentation/ci/gitlab-ci/images/pipelines-on-push.png create mode 100644 Documentation/ci/gitlab-ci/images/the-pipeline.png create mode 100644 Documentation/ci/gitlab-ci/images/variables.png create mode 100644 tools/ci/gitlab-ci/arm_cross_compile.yml create mode 100644 tools/ci/gitlab-ci/arm_native_compile.yml create mode 100755 tools/ci/gitlab-ci/bootstrap-gitlab-runner.sh create mode 100644 tools/ci/gitlab-ci/build.yml create mode 100644 tools/ci/gitlab-ci/cache.yml create mode 100755 tools/ci/gitlab-ci/ci-scripts/build-docs.sh create mode 100755 tools/ci/gitlab-ci/ci-scripts/build-kernel.sh create mode 100644 tools/ci/gitlab-ci/ci-scripts/ici-functions.sh create mode 100755 tools/ci/gitlab-ci/ci-scripts/install-smatch.sh create mode 100755 tools/ci/gitlab-ci/ci-scripts/parse_commit_message.sh create mode 100755 tools/ci/gitlab-ci/ci-scripts/run-checkpatch.sh create mode 100755 tools/ci/gitlab-ci/ci-scripts/run-smatch.sh create mode 100755 tools/ci/gitlab-ci/ci-scripts/run-virtme.sh create mode 100755 tools/ci/gitlab-ci/ci-scripts/test-boot.sh create mode 100644 tools/ci/gitlab-ci/container.yml create mode 100644 tools/ci/gitlab-ci/docker-compose.yaml create mode 100644 tools/ci/gitlab-ci/gitlab-ci.yml create mode 100644 tools/ci/gitlab-ci/scenarios.yml create mode 100755 tools/ci/gitlab-ci/scenarios/drm/build-deqp-runner.sh create mode 100755 tools/ci/gitlab-ci/scenarios/drm/build-igt.sh create mode 100755 tools/ci/gitlab-ci/scenarios/drm/build-rust.sh create mode 100755 tools/ci/gitlab-ci/scenarios/drm/create-cross-file.sh create mode 100644 tools/ci/gitlab-ci/scenarios/drm/drm.yml create mode 100755 tools/ci/gitlab-ci/scenarios/drm/prepare-container.sh create mode 100755 tools/ci/gitlab-ci/scenarios/drm/run-igt.sh create mode 100644 tools/ci/gitlab-ci/scenarios/drm/test.yml create mode 100644 tools/ci/gitlab-ci/scenarios/drm/xfails/vkms-none-fails.txt create mode 100644 tools/ci/gitlab-ci/scenarios/drm/xfails/vkms-none-flakes.txt create mode 100644 tools/ci/gitlab-ci/scenarios/drm/xfails/vkms-none-skips.txt create mode 100644 tools/ci/gitlab-ci/scenarios/file-systems/file-systems.yml create mode 100644 tools/ci/gitlab-ci/scenarios/media/media.yml create mode 100644 tools/ci/gitlab-ci/scenarios/network/network.yml create mode 100644 tools/ci/gitlab-ci/static-checks.yml create mode 100644 tools/ci/gitlab-ci/test.yml -- 2.43.0

2 months, 4 weeks

12
40
0 0

[PATCH bpf-next v3 00/14] selftests/bpf: Migrate test_xdp_redirect_multi.sh to test_progs

by Bastien Curutchet (eBPF Foundation)

Hi all, This patch series continues the work to migrate the *.sh tests into prog_tests framework. test_xdp_redirect_multi.sh tests the XDP redirections done through bpf_redirect_map(). This is already partly covered by test_xdp_veth.c that already tests map redirections at XDP level. What isn't covered yet by test_xdp_veth is the use of the broadcast flags (BPF_F_BROADCAST or BPF_F_EXCLUDE_INGRESS) and XDP egress programs. Hence, this patch series add test cases to test_xdp_veth.c to get rid of the test_xdp_redirect_multi.sh: - PATCH 1 Add an helper to generate unique names - PATCH 2 to 9 rework test_xdp_veth to make it more generic and allow to configure different test cases - PATCH 10 adds test cases for 'classic' bpf_redirect_map() - PATCH 11 and 12 cover the broadcast flags - PATCH 13 covers the XDP egress programs - PATCH 14 removes test_xdp_redirect_multi.sh Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com> --- Changes in v3: - Add append_tid() helper and use unique names to allow parallel testing - Check create_network()'s return value through ASSERT_OK() - Remove check_ping() and unused defines - Change next_veth type (from string to int) - Link to v2: https://lore.kernel.org/r/20250121-redirect-multi-v2-0-fc9cacabc6b2@bootlin… Changes in v2: - Use serial_test_* to avoid conflict between tests - Link to v1: https://lore.kernel.org/r/20250121-redirect-multi-v1-0-b215e35ff505@bootlin… --- Bastien Curutchet (eBPF Foundation) (14): selftests/bpf: helpers: Add append_tid() selftests/bpf: test_xdp_veth: Remove unused defines selftests/bpf: test_xdp_veth: Remove unecessarry check_ping() selftests/bpf: test_xdp_veth: Use int to describe next veth selftests/bpf: test_xdp_veth: Split network configuration selftests/bpf: test_xdp_veth: Rename config[] selftests/bpf: test_xdp_veth: Add prog_config[] table selftests/bpf: test_xdp_veth: Add XDP flags to prog_configuration selftests/bpf: test_xdp_veth: Use unique names selftests/bpf: test_xdp_veth: Add new test cases for XDP flags selftests/bpf: Optionally select broadcasting flags selftests/bpf: test_xdp_veth: Add XDP broadcast redirection tests selftests/bpf: test_xdp_veth: Add XDP program on egress test selftests/bpf: Remove test_xdp_redirect_multi.sh tools/testing/selftests/bpf/Makefile | 2 - tools/testing/selftests/bpf/network_helpers.c | 11 + tools/testing/selftests/bpf/network_helpers.h | 10 + .../selftests/bpf/prog_tests/test_xdp_veth.c | 589 ++++++++++++++++----- .../testing/selftests/bpf/progs/xdp_redirect_map.c | 89 ++++ .../selftests/bpf/progs/xdp_redirect_multi_kern.c | 41 +- .../selftests/bpf/test_xdp_redirect_multi.sh | 214 -------- tools/testing/selftests/bpf/xdp_redirect_multi.c | 226 -------- 8 files changed, 608 insertions(+), 574 deletions(-) --- base-commit: e65d1a6e096af0648ffdbc9d7e8bd7a44dcc700b change-id: 20250103-redirect-multi-245d6eafb5d1 Best regards, -- Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com>

2 months, 4 weeks

3
19
0 0

[PATCH bpf v1] selftests/bpf: Fix runqslower cross-endian build

by Tony Ambardar

From: Tony Ambardar <tony.ambardar(a)gmail.com> The runqslower binary from a cross-endian build currently fails to run because the included skeleton has host endianness. Fix this by passing the target BPF endianness to the runqslower sub-make. Fixes: 5a63c33d6f00 ("selftests/bpf: Support cross-endian building") Signed-off-by: Tony Ambardar <tony.ambardar(a)gmail.com> --- tools/bpf/runqslower/Makefile | 3 ++- tools/testing/selftests/bpf/Makefile | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/bpf/runqslower/Makefile b/tools/bpf/runqslower/Makefile index c4f1f1735af6..5613b5736d93 100644 --- a/tools/bpf/runqslower/Makefile +++ b/tools/bpf/runqslower/Makefile @@ -6,6 +6,7 @@ OUTPUT ?= $(abspath .output)/ BPFTOOL_OUTPUT := $(OUTPUT)bpftool/ DEFAULT_BPFTOOL := $(BPFTOOL_OUTPUT)bootstrap/bpftool BPFTOOL ?= $(DEFAULT_BPFTOOL) +BPF_TARGET_ENDIAN ?= --target=bpf LIBBPF_SRC := $(abspath ../../lib/bpf) BPFOBJ_OUTPUT := $(OUTPUT)libbpf/ BPFOBJ := $(BPFOBJ_OUTPUT)libbpf.a @@ -63,7 +64,7 @@ $(OUTPUT)/%.skel.h: $(OUTPUT)/%.bpf.o | $(BPFTOOL) $(QUIET_GEN)$(BPFTOOL) gen skeleton $< > $@ $(OUTPUT)/%.bpf.o: %.bpf.c $(BPFOBJ) | $(OUTPUT) - $(QUIET_GEN)$(CLANG) -g -O2 --target=bpf $(INCLUDES) \ + $(QUIET_GEN)$(CLANG) -g -O2 $(BPF_TARGET_ENDIAN) $(INCLUDES) \ -c $(filter %.c,$^) -o $@ && \ $(LLVM_STRIP) -g $@ diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 87551628e112..6722080b2107 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -306,6 +306,7 @@ $(OUTPUT)/runqslower: $(BPFOBJ) | $(DEFAULT_BPFTOOL) $(RUNQSLOWER_OUTPUT) BPFTOOL_OUTPUT=$(HOST_BUILD_DIR)/bpftool/ \ BPFOBJ_OUTPUT=$(BUILD_DIR)/libbpf/ \ BPFOBJ=$(BPFOBJ) BPF_INCLUDE=$(INCLUDE_DIR) \ + BPF_TARGET_ENDIAN=$(BPF_TARGET_ENDIAN) \ EXTRA_CFLAGS='-g $(OPT_FLAGS) $(SAN_CFLAGS) $(EXTRA_CFLAGS)' \ EXTRA_LDFLAGS='$(SAN_LDFLAGS) $(EXTRA_LDFLAGS)' && \ cp $(RUNQSLOWER_OUTPUT)runqslower $@ -- 2.34.1

3 months

2
1
0 0

[PATCH v6] Kunit to check the longest symbol length

by Sergio González Collado

The longest length of a symbol (KSYM_NAME_LEN) was increased to 512 in the reference [1]. This patch adds kunit test suite to check the longest symbol length. These tests verify that the longest symbol length defined is supported. This test can also help other efforts for longer symbol length, like [2]. The test suite defines one symbol with the longest possible length. The first test verify that functions with names of the created symbol, can be called or not. The second test, verify that the symbols are created (or not) in the kernel symbol table. [1] https://lore.kernel.org/lkml/20220802015052.10452-6-ojeda@kernel.org/ [2] https://lore.kernel.org/lkml/20240605032120.3179157-1-song@kernel.org/ Tested-by: Martin Rodriguez Reboredo <yakoyoku(a)gmail.com> Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sergio González Collado <sergio.collado(a)gmail.com> Link: https://github.com/Rust-for-Linux/linux/issues/504 --- V5 -> V6: remove tests with symbols of length KSYM_NAME_LEN+1 --- V4 -> V5: fixed typo, added improved description --- V3 -> V4: add x86 mantainers, add new reference. --- V2 -> V3: updated base and added MODULE_DESCRIPTION() and MODULE_AUTHOR() --- V1 -> V2: corrected CI tests. Added fix proposed at [3] [3] https://lore.kernel.org/lkml/Y9ES4UKl%2F+DtvAVS@gmail.com/T/#m3ef0e12bb834d… The test execution should result in something like: ``` [20:04:35] =============== longest-symbol (4 subtests) ================ [20:04:35] [PASSED] test_longest_symbol [20:04:35] [PASSED] test_longest_symbol_kallsyms [20:04:35] ================= [PASSED] longest-symbol ================== [20:04:35] ============================================================ [20:04:35] Testing complete. Ran 4 tests: passed: 4 ``` --- arch/x86/tools/insn_decoder_test.c | 3 +- lib/Kconfig.debug | 9 ++++ lib/Makefile | 2 + lib/longest_symbol_kunit.c | 84 ++++++++++++++++++++++++++++++ 4 files changed, 97 insertions(+), 1 deletion(-) create mode 100644 lib/longest_symbol_kunit.c diff --git a/arch/x86/tools/insn_decoder_test.c b/arch/x86/tools/insn_decoder_test.c index 472540aeabc2..3bde35ea4188 100644 --- a/arch/x86/tools/insn_decoder_test.c +++ b/arch/x86/tools/insn_decoder_test.c @@ -10,6 +10,7 @@ #include <assert.h> #include <unistd.h> #include <stdarg.h> +#include <linux/kallsysms.h> #define unlikely(cond) (cond) @@ -106,7 +107,7 @@ static void parse_args(int argc, char **argv) } } -#define BUFSIZE 256 +#define BUFSIZE (256 + KSYM_NAME_LEN) int main(int argc, char **argv) { diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 5f1874622175..4c3a61862281 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2828,6 +2828,15 @@ config FORTIFY_KUNIT_TEST by the str*() and mem*() family of functions. For testing runtime traps of FORTIFY_SOURCE, see LKDTM's "FORTIFY_*" tests. +config LONGEST_SYM_KUNIT_TEST + tristate "Test the longest symbol possible" if !KUNIT_ALL_TESTS + depends on KUNIT && KPROBES + default KUNIT_ALL_TESTS + help + Tests the longest symbol possible + + If unsure, say N. + config HW_BREAKPOINT_KUNIT_TEST bool "Test hw_breakpoint constraints accounting" if !KUNIT_ALL_TESTS depends on HAVE_HW_BREAKPOINT diff --git a/lib/Makefile b/lib/Makefile index d5cfc7afbbb8..e8fec9defec2 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -393,6 +393,8 @@ obj-$(CONFIG_FORTIFY_KUNIT_TEST) += fortify_kunit.o obj-$(CONFIG_CRC_KUNIT_TEST) += crc_kunit.o obj-$(CONFIG_SIPHASH_KUNIT_TEST) += siphash_kunit.o obj-$(CONFIG_USERCOPY_KUNIT_TEST) += usercopy_kunit.o +obj-$(CONFIG_LONGEST_SYM_KUNIT_TEST) += longest_symbol_kunit.o +CFLAGS_longest_symbol_kunit.o += $(call cc-disable-warning, missing-prototypes) obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o diff --git a/lib/longest_symbol_kunit.c b/lib/longest_symbol_kunit.c new file mode 100644 index 000000000000..38ae117647e4 --- /dev/null +++ b/lib/longest_symbol_kunit.c @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Test the longest symbol length. Execute with: + * ./tools/testing/kunit/kunit.py run longest-symbol + * --arch=x86_64 --kconfig_add CONFIG_KPROBES=y --kconfig_add CONFIG_MODULES=y + * --kconfig_add CONFIG_RETPOLINE=n --kconfig_add CONFIG_CFI_CLANG=n + * --kconfig_add CONFIG_MITIGATION_RETPOLINE=n + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <kunit/test.h> +#include <linux/stringify.h> +#include <linux/kprobes.h> +#include <linux/kallsyms.h> + +#define DI(name) s##name##name +#define DDI(name) DI(n##name##name) +#define DDDI(name) DDI(n##name##name) +#define DDDDI(name) DDDI(n##name##name) +#define DDDDDI(name) DDDDI(n##name##name) + +#define PLUS1(name) __PASTE(name, e) + +/*Generate a symbol whose name length is 511 */ +#define LONGEST_SYM_NAME DDDDDI(g1h2i3j4k5l6m7n) + +#define RETURN_LONGEST_SYM 0xAAAAA + +noinline int LONGEST_SYM_NAME(void); +noinline int LONGEST_SYM_NAME(void) +{ + return RETURN_LONGEST_SYM; +} + +_Static_assert(sizeof(__stringify(LONGEST_SYM_NAME)) == KSYM_NAME_LEN, +"Incorrect symbol length found. Expected KSYM_NAME_LEN: " +__stringify(KSYM_NAME) ", but found: " +__stringify(sizeof(LONGEST_SYM_NAME))); + +static void test_longest_symbol(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, RETURN_LONGEST_SYM, LONGEST_SYM_NAME()); +}; + +static void test_longest_symbol_kallsyms(struct kunit *test) +{ + unsigned long (*kallsyms_lookup_name)(const char *name); + static int (*longest_sym)(void); + + struct kprobe kp = { + .symbol_name = "kallsyms_lookup_name", + }; + + if (register_kprobe(&kp) < 0) { + pr_info("%s: kprobe not registered\n", __func__); + KUNIT_FAIL(test, "test_longest_symbol kallsysms: kprobe not registered\n"); + return; + } + + kunit_warn(test, "test_longest_symbol kallsyms: kprobe registered\n"); + kallsyms_lookup_name = (unsigned long (*)(const char *name))kp.addr; + unregister_kprobe(&kp); + + longest_sym = + (void *) kallsyms_lookup_name(__stringify(LONGEST_SYM_NAME)); + KUNIT_EXPECT_EQ(test, RETURN_LONGEST_SYM, longest_sym()); +}; + +static struct kunit_case longest_symbol_test_cases[] = { + KUNIT_CASE(test_longest_symbol), + KUNIT_CASE(test_longest_symbol_kallsyms), + {} +}; + +static struct kunit_suite longest_symbol_test_suite = { + .name = "longest-symbol", + .test_cases = longest_symbol_test_cases, +}; +kunit_test_suite(longest_symbol_test_suite); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Test the longest symbol length"); +MODULE_AUTHOR("Sergio González Collado"); -- 2.39.2

3 months

3
5
0 0

[PATCH] KVM: s390: selftests: Streamline uc_skey test to issue iske after sske

by Christoph Schlameuss

In some rare situations a non default storage key is already set on the memory used by the test. Within normal VMs the key is reset / zapped when the memory is added to the VM. This is not the case for ucontrol VMs. With the initial iske check removed this test case can work in all situations. The function of the iske instruction is still validated by the remaining code. Fixes: 0185fbc6a2d3 ("KVM: s390: selftests: Add uc_skey VM test case") Signed-off-by: Christoph Schlameuss <schlameuss(a)linux.ibm.com> --- .../selftests/kvm/s390/ucontrol_test.c | 24 +++++-------------- 1 file changed, 6 insertions(+), 18 deletions(-) diff --git a/tools/testing/selftests/kvm/s390/ucontrol_test.c b/tools/testing/selftests/kvm/s390/ucontrol_test.c index 135ee22856cf..d1080020a243 100644 --- a/tools/testing/selftests/kvm/s390/ucontrol_test.c +++ b/tools/testing/selftests/kvm/s390/ucontrol_test.c @@ -88,10 +88,6 @@ asm("test_skey_asm:\n" " ahi %r0,1\n" " st %r1,0(%r5,%r6)\n" - " iske %r1,%r6\n" - " ahi %r0,1\n" - " diag 0,0,0x44\n" - " sske %r1,%r6\n" " xgr %r1,%r1\n" " iske %r1,%r6\n" @@ -596,7 +592,9 @@ TEST_F(uc_kvm, uc_skey) ASSERT_EQ(true, uc_handle_exit(self)); ASSERT_EQ(1, sync_regs->gprs[0]); - /* ISKE */ + /* SSKE + ISKE */ + sync_regs->gprs[1] = skeyvalue; + run->kvm_dirty_regs |= KVM_SYNC_GPRS; ASSERT_EQ(0, uc_run_once(self)); /* @@ -608,21 +606,11 @@ TEST_F(uc_kvm, uc_skey) TEST_ASSERT_EQ(0, sie_block->ictl & (ICTL_ISKE | ICTL_SSKE | ICTL_RRBE)); TEST_ASSERT_EQ(KVM_EXIT_S390_SIEIC, self->run->exit_reason); TEST_ASSERT_EQ(ICPT_INST, sie_block->icptcode); - TEST_REQUIRE(sie_block->ipa != 0xb229); + TEST_REQUIRE(sie_block->ipa != 0xb22b); - /* ISKE contd. */ + /* SSKE + ISKE contd. */ ASSERT_EQ(false, uc_handle_exit(self)); ASSERT_EQ(2, sync_regs->gprs[0]); - /* assert initial skey (ACC = 0, R & C = 1) */ - ASSERT_EQ(0x06, sync_regs->gprs[1]); - uc_assert_diag44(self); - - /* SSKE + ISKE */ - sync_regs->gprs[1] = skeyvalue; - run->kvm_dirty_regs |= KVM_SYNC_GPRS; - ASSERT_EQ(0, uc_run_once(self)); - ASSERT_EQ(false, uc_handle_exit(self)); - ASSERT_EQ(3, sync_regs->gprs[0]); ASSERT_EQ(skeyvalue, sync_regs->gprs[1]); uc_assert_diag44(self); @@ -631,7 +619,7 @@ TEST_F(uc_kvm, uc_skey) run->kvm_dirty_regs |= KVM_SYNC_GPRS; ASSERT_EQ(0, uc_run_once(self)); ASSERT_EQ(false, uc_handle_exit(self)); - ASSERT_EQ(4, sync_regs->gprs[0]); + ASSERT_EQ(3, sync_regs->gprs[0]); /* assert R reset but rest of skey unchanged */ ASSERT_EQ(skeyvalue & 0xfa, sync_regs->gprs[1]); ASSERT_EQ(0, sync_regs->gprs[1] & 0x04); -- 2.48.1

3 months

1
0
0 0

[PATCH v5 0/3] Add support for the Idle HLT intercept feature

by Manali Shukla

The upcoming new Idle HLT Intercept feature allows for the HLT instruction execution by a vCPU to be intercepted by the hypervisor only if there are no pending V_INTR and V_NMI events for the vCPU. When the vCPU is expected to service the pending V_INTR and V_NMI events, the Idle HLT intercept won’t trigger. The feature allows the hypervisor to determine if the vCPU is actually idle and reduces wasteful VMEXITs. The Idle HLT intercept feature is used for enlightened guests who wish to securely handle the events. When an enlightened guest does a HLT while an interrupt is pending, hypervisor will not have a way to figure out whether the guest needs to be re-entered or not. The Idle HLT intercept feature allows the HLT execution only if there are no pending V_INTR and V_NMI events. Presence of the Idle HLT Intercept feature is indicated via CPUID function Fn8000_000A_EDX[30]. Document for the Idle HLT intercept feature is available at [1]. This series is based on kvm-x86/next (13e98294d7ce) + [2] + [3]. Testing Done: - Tested the functionality for the Idle HLT intercept feature using selftest ipi_hlt_test. - Tested on normal, SEV, SEV-ES, SEV-SNP guest for the Idle HLT intercept functionality. - Tested the Idle HLT intercept functionality on nested guest. v4 -> v5 - Incorporated Sean's review comments on nested Idle HLT intercept support. - Make svm_idle_hlt_test independent of the Idle HLT to run on all hardware. v3 -> v4 - Drop the patches to add vcpu_get_stat() into a new series [2]. - Added nested Idle HLT intercept support. v2 -> v3 - Incorporated Andrew's suggestion to structure vcpu_stat_types in a way that each architecture can share the generic types and also provide its own. v1 -> v2 - Done changes in svm_idle_hlt_test based on the review comments from Sean. - Added an enum based approach to get binary stats in vcpu_get_stat() which doesn't use string to get stat data based on the comments from Sean. - Added safe_halt() and cli() helpers based on the comments from Sean. [1]: AMD64 Architecture Programmer's Manual Pub. 24593, April 2024, Vol 2, 15.9 Instruction Intercepts (Table 15-7: IDLE_HLT). https://bugzilla.kernel.org/attachment.cgi?id=306250 [2]: https://lore.kernel.org/kvm/20241220013906.3518334-1-seanjc@google.com/T/#u [3]: https://lore.kernel.org/kvm/20241220012617.3513898-1-seanjc@google.com/T/#u --- V4: https://lore.kernel.org/kvm/20241022054810.23369-1-manali.shukla@amd.com/ V3: https://lore.kernel.org/kvm/20240528041926.3989-4-manali.shukla@amd.com/T/ V2: https://lore.kernel.org/kvm/20240501145433.4070-1-manali.shukla@amd.com/ V1: https://lore.kernel.org/kvm/20240307054623.13632-1-manali.shukla@amd.com/ Manali Shukla (3): x86/cpufeatures: Add CPUID feature bit for Idle HLT intercept KVM: SVM: Add Idle HLT intercept support KVM: selftests: Add self IPI HLT test arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/svm.h | 1 + arch/x86/include/uapi/asm/svm.h | 2 + arch/x86/kvm/svm/svm.c | 13 ++- tools/testing/selftests/kvm/Makefile.kvm | 1 + .../selftests/kvm/include/x86/processor.h | 1 + tools/testing/selftests/kvm/ipi_hlt_test.c | 85 +++++++++++++++++++ 7 files changed, 101 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/kvm/ipi_hlt_test.c base-commit: 13e98294d7cec978e31138d16824f50556a62d17 prerequisite-patch-id: cb345fc0d814a351df2b5788b76eee0eef9de549 prerequisite-patch-id: 71806f400cffe09f47d6231cb072cbdbd540de1b prerequisite-patch-id: 9ea0412aab7ecd8555fcee3e9609dbfe8456d47b prerequisite-patch-id: 3504df50cdd33958456f2e56139d76867273525c prerequisite-patch-id: 674e56729a56cc487cb85be1a64ef561eb7bac8a prerequisite-patch-id: 48e87354f9d6e6bd121ca32ab73cd0d7f1dce74f prerequisite-patch-id: 74daffd7677992995f37e5a5cb784b8d4357e342 prerequisite-patch-id: 509018dc2fc1657debc641544e86f5a92d04bc1a prerequisite-patch-id: 4a50c6a4dc3b3c8c8c640a86072faafb7bae4384 -- 2.34.1

3 months

3
8
0 0

[PATCH net v3] bonding: Correctly support GSO ESP offload

by Cosmin Ratiu

The referenced fix is incomplete. It correctly computes bond_dev->gso_partial_features across slaves, but unfortunately netdev_fix_features discards gso_partial_features from the feature set if NETIF_F_GSO_PARTIAL isn't set in bond_dev->features. This is visible with ethtool -k bond0 | grep esp: tx-esp-segmentation: off [requested on] esp-hw-offload: on esp-tx-csum-hw-offload: on This patch reworks the bonding GSO offload support by: - making aggregating gso_partial_features across slaves similar to the other feature sets (this part is a no-op). - advertising the default partial gso features on empty bond devs, same as with other feature sets (also a no-op). - adding NETIF_F_GSO_PARTIAL to hw_enc_features filtered across slaves. - adding NETIF_F_GSO_PARTIAL to features in bond_setup() With all of these, 'ethtool -k bond0 | grep esp' now reports: tx-esp-segmentation: on esp-hw-offload: on esp-tx-csum-hw-offload: on Fixes: 4861333b4217 ("bonding: add ESP offload features when slaves support") Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> Signed-off-by: Cosmin Ratiu <cratiu(a)nvidia.com> --- drivers/net/bonding/bond_main.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 7b78c2bada81..e45bba240cbc 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1538,17 +1538,20 @@ static netdev_features_t bond_fix_features(struct net_device *dev, NETIF_F_HIGHDMA | NETIF_F_LRO) #define BOND_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ - NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE) + NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE | \ + NETIF_F_GSO_PARTIAL) #define BOND_MPLS_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ NETIF_F_GSO_SOFTWARE) +#define BOND_GSO_PARTIAL_FEATURES (NETIF_F_GSO_ESP) + static void bond_compute_features(struct bonding *bond) { + netdev_features_t gso_partial_features = BOND_GSO_PARTIAL_FEATURES; unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM; - netdev_features_t gso_partial_features = NETIF_F_GSO_ESP; netdev_features_t vlan_features = BOND_VLAN_FEATURES; netdev_features_t enc_features = BOND_ENC_FEATURES; #ifdef CONFIG_XFRM_OFFLOAD @@ -1582,8 +1585,9 @@ static void bond_compute_features(struct bonding *bond) BOND_XFRM_FEATURES); #endif /* CONFIG_XFRM_OFFLOAD */ - if (slave->dev->hw_enc_features & NETIF_F_GSO_PARTIAL) - gso_partial_features &= slave->dev->gso_partial_features; + gso_partial_features = netdev_increment_features(gso_partial_features, + slave->dev->gso_partial_features, + BOND_GSO_PARTIAL_FEATURES); mpls_features = netdev_increment_features(mpls_features, slave->dev->mpls_features, @@ -1598,12 +1602,8 @@ static void bond_compute_features(struct bonding *bond) } bond_dev->hard_header_len = max_hard_header_len; - if (gso_partial_features & NETIF_F_GSO_ESP) - bond_dev->gso_partial_features |= NETIF_F_GSO_ESP; - else - bond_dev->gso_partial_features &= ~NETIF_F_GSO_ESP; - done: + bond_dev->gso_partial_features = gso_partial_features; bond_dev->vlan_features = vlan_features; bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL | NETIF_F_HW_VLAN_CTAG_TX | @@ -6046,6 +6046,7 @@ void bond_setup(struct net_device *bond_dev) bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL; bond_dev->features |= bond_dev->hw_features; bond_dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX; + bond_dev->features |= NETIF_F_GSO_PARTIAL; #ifdef CONFIG_XFRM_OFFLOAD bond_dev->hw_features |= BOND_XFRM_FEATURES; /* Only enable XFRM features if this is an active-backup config */ -- 2.45.0

3 months

4
4
0 0

[PATCH v7] Kunit to check the longest symbol length

by Sergio González Collado

The longest length of a symbol (KSYM_NAME_LEN) was increased to 512 in the reference [1]. This patch adds kunit test suite to check the longest symbol length. These tests verify that the longest symbol length defined is supported. This test can also help other efforts for longer symbol length, like [2]. The test suite defines one symbol with the longest possible length. The first test verify that functions with names of the created symbol, can be called or not. The second test, verify that the symbols are created (or not) in the kernel symbol table. [1] https://lore.kernel.org/lkml/20220802015052.10452-6-ojeda@kernel.org/ [2] https://lore.kernel.org/lkml/20240605032120.3179157-1-song@kernel.org/ Tested-by: Martin Rodriguez Reboredo <yakoyoku(a)gmail.com> Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> Reviewed-by: Rae Moar <rmoar(a)google.com> Signed-off-by: Sergio González Collado <sergio.collado(a)gmail.com> Link: https://github.com/Rust-for-Linux/linux/issues/504 --- V6 -> V7: rebased --- V5 -> V6: remove tests with symbols of length KSYM_NAME_LEN+1 --- V4 -> V5: fixed typo, added improved description --- V3 -> V4: add x86 mantainers, add new reference. --- V2 -> V3: updated base and added MODULE_DESCRIPTION() and MODULE_AUTHOR() --- V1 -> V2: corrected CI tests. Added fix proposed at [3] [3] https://lore.kernel.org/lkml/Y9ES4UKl%2F+DtvAVS@gmail.com/T/#m3ef0e12bb834d… The test execution should result in something like: ``` --- arch/x86/tools/insn_decoder_test.c | 3 +- lib/Kconfig.debug | 9 ++++ lib/Makefile | 2 + lib/longest_symbol_kunit.c | 84 ++++++++++++++++++++++++++++++ 4 files changed, 97 insertions(+), 1 deletion(-) create mode 100644 lib/longest_symbol_kunit.c diff --git a/arch/x86/tools/insn_decoder_test.c b/arch/x86/tools/insn_decoder_test.c index 472540aeabc2..3bde35ea4188 100644 --- a/arch/x86/tools/insn_decoder_test.c +++ b/arch/x86/tools/insn_decoder_test.c @@ -10,6 +10,7 @@ #include <assert.h> #include <unistd.h> #include <stdarg.h> +#include <linux/kallsysms.h> #define unlikely(cond) (cond) @@ -106,7 +107,7 @@ static void parse_args(int argc, char **argv) } } -#define BUFSIZE 256 +#define BUFSIZE (256 + KSYM_NAME_LEN) int main(int argc, char **argv) { diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 775966cf6114..9bab160efa4a 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2852,6 +2852,15 @@ config FORTIFY_KUNIT_TEST by the str*() and mem*() family of functions. For testing runtime traps of FORTIFY_SOURCE, see LKDTM's "FORTIFY_*" tests. +config LONGEST_SYM_KUNIT_TEST + tristate "Test the longest symbol possible" if !KUNIT_ALL_TESTS + depends on KUNIT && KPROBES + default KUNIT_ALL_TESTS + help + Tests the longest symbol possible + + If unsure, say N. + config HW_BREAKPOINT_KUNIT_TEST bool "Test hw_breakpoint constraints accounting" if !KUNIT_ALL_TESTS depends on HAVE_HW_BREAKPOINT diff --git a/lib/Makefile b/lib/Makefile index f1c6e9d76a7c..33b5ef908764 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -393,6 +393,8 @@ obj-$(CONFIG_FORTIFY_KUNIT_TEST) += fortify_kunit.o obj-$(CONFIG_CRC_KUNIT_TEST) += crc_kunit.o obj-$(CONFIG_SIPHASH_KUNIT_TEST) += siphash_kunit.o obj-$(CONFIG_USERCOPY_KUNIT_TEST) += usercopy_kunit.o +obj-$(CONFIG_LONGEST_SYM_KUNIT_TEST) += longest_symbol_kunit.o +CFLAGS_longest_symbol_kunit.o += $(call cc-disable-warning, missing-prototypes) obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o diff --git a/lib/longest_symbol_kunit.c b/lib/longest_symbol_kunit.c new file mode 100644 index 000000000000..38ae117647e4 --- /dev/null +++ b/lib/longest_symbol_kunit.c @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Test the longest symbol length. Execute with: + * ./tools/testing/kunit/kunit.py run longest-symbol + * --arch=x86_64 --kconfig_add CONFIG_KPROBES=y --kconfig_add CONFIG_MODULES=y + * --kconfig_add CONFIG_RETPOLINE=n --kconfig_add CONFIG_CFI_CLANG=n + * --kconfig_add CONFIG_MITIGATION_RETPOLINE=n + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <kunit/test.h> +#include <linux/stringify.h> +#include <linux/kprobes.h> +#include <linux/kallsyms.h> + +#define DI(name) s##name##name +#define DDI(name) DI(n##name##name) +#define DDDI(name) DDI(n##name##name) +#define DDDDI(name) DDDI(n##name##name) +#define DDDDDI(name) DDDDI(n##name##name) + +#define PLUS1(name) __PASTE(name, e) + +/*Generate a symbol whose name length is 511 */ +#define LONGEST_SYM_NAME DDDDDI(g1h2i3j4k5l6m7n) + +#define RETURN_LONGEST_SYM 0xAAAAA + +noinline int LONGEST_SYM_NAME(void); +noinline int LONGEST_SYM_NAME(void) +{ + return RETURN_LONGEST_SYM; +} + +_Static_assert(sizeof(__stringify(LONGEST_SYM_NAME)) == KSYM_NAME_LEN, +"Incorrect symbol length found. Expected KSYM_NAME_LEN: " +__stringify(KSYM_NAME) ", but found: " +__stringify(sizeof(LONGEST_SYM_NAME))); + +static void test_longest_symbol(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, RETURN_LONGEST_SYM, LONGEST_SYM_NAME()); +}; + +static void test_longest_symbol_kallsyms(struct kunit *test) +{ + unsigned long (*kallsyms_lookup_name)(const char *name); + static int (*longest_sym)(void); + + struct kprobe kp = { + .symbol_name = "kallsyms_lookup_name", + }; + + if (register_kprobe(&kp) < 0) { + pr_info("%s: kprobe not registered\n", __func__); + KUNIT_FAIL(test, "test_longest_symbol kallsysms: kprobe not registered\n"); + return; + } + + kunit_warn(test, "test_longest_symbol kallsyms: kprobe registered\n"); + kallsyms_lookup_name = (unsigned long (*)(const char *name))kp.addr; + unregister_kprobe(&kp); + + longest_sym = + (void *) kallsyms_lookup_name(__stringify(LONGEST_SYM_NAME)); + KUNIT_EXPECT_EQ(test, RETURN_LONGEST_SYM, longest_sym()); +}; + +static struct kunit_case longest_symbol_test_cases[] = { + KUNIT_CASE(test_longest_symbol), + KUNIT_CASE(test_longest_symbol_kallsyms), + {} +}; + +static struct kunit_suite longest_symbol_test_suite = { + .name = "longest-symbol", + .test_cases = longest_symbol_test_cases, +}; +kunit_test_suite(longest_symbol_test_suite); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Test the longest symbol length"); +MODULE_AUTHOR("Sergio González Collado"); base-commit: 6d61a53dd6f55405ebcaea6ee38d1ab5a8856c2c -- 2.39.2

3 months

1
0
0 0

[PATCH Linux-6.12.y 1/1] selftests/mm: build with -O2

by Yifei Liu

From: Kevin Brodsky <kevin.brodsky(a)arm.com> [ Upstream commit 46036188ea1f5266df23a6149dea0df1c77cd1c7 ] The mm kselftests are currently built with no optimisation (-O0). It's unclear why, and besides being obviously suboptimal, this also prevents the pkeys tests from working as intended. Let's build all the tests with -O2. [kevin.brodsky(a)arm.com: silence unused-result warnings] Link: https://lkml.kernel.org/r/20250107170110.2819685-1-kevin.brodsky@arm.com Link: https://lkml.kernel.org/r/20241209095019.1732120-6-kevin.brodsky@arm.com Signed-off-by: Kevin Brodsky <kevin.brodsky(a)arm.com> Cc: Aruna Ramakrishna <aruna.ramakrishna(a)oracle.com> Cc: Catalin Marinas <catalin.marinas(a)arm.com> Cc: Dave Hansen <dave.hansen(a)linux.intel.com> Cc: Joey Gouly <joey.gouly(a)arm.com> Cc: Keith Lucas <keith.lucas(a)oracle.com> Cc: Ryan Roberts <ryan.roberts(a)arm.com> Cc: Shuah Khan <shuah(a)kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> (cherry picked from commit 46036188ea1f5266df23a6149dea0df1c77cd1c7) [Yifei: This commit also fix the failure of pkey_sighandler_tests_64, which is also in linux-6.12.y, thus backport this commit] Signed-off-by: Yifei Liu <yifei.l.liu(a)oracle.com> --- tools/testing/selftests/mm/Makefile | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index 02e1204971b0..c0138cb19705 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -33,9 +33,16 @@ endif # LDLIBS. MAKEFLAGS += --no-builtin-rules -CFLAGS = -Wall -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES) $(TOOLS_INCLUDES) +CFLAGS = -Wall -O2 -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES) $(TOOLS_INCLUDES) LDLIBS = -lrt -lpthread -lm +# Some distributions (such as Ubuntu) configure GCC so that _FORTIFY_SOURCE is +# automatically enabled at -O1 or above. This triggers various unused-result +# warnings where functions such as read() or write() are called and their +# return value is not checked. Disable _FORTIFY_SOURCE to silence those +# warnings. +CFLAGS += -U_FORTIFY_SOURCE + TEST_GEN_FILES = cow TEST_GEN_FILES += compaction_test TEST_GEN_FILES += gup_longterm -- 2.46.0

3 months

1
0
0 0

[PATCH net] selftests: net/{lib,openvswitch}: extend CFLAGS to keep options from environment

by Jan Stancek

Package build environments like Fedora rpmbuild introduced hardening options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS and LDFLAGS. Some Makefiles currently override CFLAGS but not LDFLAGS, which leads to a mismatch and build failure, for example: /usr/bin/ld: /tmp/ccd2apay.o: relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIE /usr/bin/ld: failed to set dynamic section sizes: bad value collect2: error: ld returned 1 exit status make[1]: *** [../../lib.mk:222: tools/testing/selftests/net/lib/csum] Error 1 openvswitch/Makefile CFLAGS currently do not appear to be used, but fix it anyway for the case when new tests are introduced in future. Fixes: 1d0dc857b5d8 ("selftests: drv-net: add checksum tests") Signed-off-by: Jan Stancek <jstancek(a)redhat.com> --- tools/testing/selftests/net/lib/Makefile | 2 +- tools/testing/selftests/net/openvswitch/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/lib/Makefile b/tools/testing/selftests/net/lib/Makefile index 18b9443454a9..578de40cc5e3 100644 --- a/tools/testing/selftests/net/lib/Makefile +++ b/tools/testing/selftests/net/lib/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -CFLAGS = -Wall -Wl,--no-as-needed -O2 -g +CFLAGS += -Wall -Wl,--no-as-needed -O2 -g CFLAGS += -I../../../../../usr/include/ $(KHDR_INCLUDES) # Additional include paths needed by kselftest.h CFLAGS += -I../../ diff --git a/tools/testing/selftests/net/openvswitch/Makefile b/tools/testing/selftests/net/openvswitch/Makefile index 2f1508abc826..1567a549ba34 100644 --- a/tools/testing/selftests/net/openvswitch/Makefile +++ b/tools/testing/selftests/net/openvswitch/Makefile @@ -2,7 +2,7 @@ top_srcdir = ../../../../.. -CFLAGS = -Wall -Wl,--no-as-needed -O2 -g -I$(top_srcdir)/usr/include $(KHDR_INCLUDES) +CFLAGS += -Wall -Wl,--no-as-needed -O2 -g -I$(top_srcdir)/usr/include $(KHDR_INCLUDES) TEST_PROGS := openvswitch.sh -- 2.43.0

3 months

4
4
0 0

[PATCH net] net: netdevsim: try to close UDP port harness races

by Jakub Kicinski

syzbot discovered that we remove the debugfs files after we free the netdev. Try to clean up the relevant dir while the device is still around. Reported-by: syzbot+2e5de9e3ab986b71d2bf(a)syzkaller.appspotmail.com Fixes: 424be63ad831 ("netdevsim: add UDP tunnel port offload support") Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org --- drivers/net/netdevsim/netdevsim.h | 1 + drivers/net/netdevsim/udp_tunnels.c | 23 +++++++++++-------- .../drivers/net/netdevsim/udp_tunnel_nic.sh | 16 ++++++------- 3 files changed, 23 insertions(+), 17 deletions(-) diff --git a/drivers/net/netdevsim/netdevsim.h b/drivers/net/netdevsim/netdevsim.h index dcf073bc4802..96d54c08043d 100644 --- a/drivers/net/netdevsim/netdevsim.h +++ b/drivers/net/netdevsim/netdevsim.h @@ -134,6 +134,7 @@ struct netdevsim { u32 sleep; u32 __ports[2][NSIM_UDP_TUNNEL_N_PORTS]; u32 (*ports)[NSIM_UDP_TUNNEL_N_PORTS]; + struct dentry *ddir; struct debugfs_u32_array dfs_ports[2]; } udp_ports; diff --git a/drivers/net/netdevsim/udp_tunnels.c b/drivers/net/netdevsim/udp_tunnels.c index 02dc3123eb6c..640b4983a9a0 100644 --- a/drivers/net/netdevsim/udp_tunnels.c +++ b/drivers/net/netdevsim/udp_tunnels.c @@ -112,9 +112,11 @@ nsim_udp_tunnels_info_reset_write(struct file *file, const char __user *data, struct net_device *dev = file->private_data; struct netdevsim *ns = netdev_priv(dev); - memset(ns->udp_ports.ports, 0, sizeof(ns->udp_ports.__ports)); rtnl_lock(); - udp_tunnel_nic_reset_ntf(dev); + if (dev->reg_state == NETREG_REGISTERED) { + memset(ns->udp_ports.ports, 0, sizeof(ns->udp_ports.__ports)); + udp_tunnel_nic_reset_ntf(dev); + } rtnl_unlock(); return count; @@ -144,23 +146,23 @@ int nsim_udp_tunnels_info_create(struct nsim_dev *nsim_dev, else ns->udp_ports.ports = nsim_dev->udp_ports.__ports; - debugfs_create_u32("udp_ports_inject_error", 0600, - ns->nsim_dev_port->ddir, + ns->udp_ports.ddir = debugfs_create_dir("udp_ports", + ns->nsim_dev_port->ddir); + + debugfs_create_u32("inject_error", 0600, ns->udp_ports.ddir, &ns->udp_ports.inject_error); ns->udp_ports.dfs_ports[0].array = ns->udp_ports.ports[0]; ns->udp_ports.dfs_ports[0].n_elements = NSIM_UDP_TUNNEL_N_PORTS; - debugfs_create_u32_array("udp_ports_table0", 0400, - ns->nsim_dev_port->ddir, + debugfs_create_u32_array("table0", 0400, ns->udp_ports.ddir, &ns->udp_ports.dfs_ports[0]); ns->udp_ports.dfs_ports[1].array = ns->udp_ports.ports[1]; ns->udp_ports.dfs_ports[1].n_elements = NSIM_UDP_TUNNEL_N_PORTS; - debugfs_create_u32_array("udp_ports_table1", 0400, - ns->nsim_dev_port->ddir, + debugfs_create_u32_array("table1", 0400, ns->udp_ports.ddir, &ns->udp_ports.dfs_ports[1]); - debugfs_create_file("udp_ports_reset", 0200, ns->nsim_dev_port->ddir, + debugfs_create_file("reset", 0200, ns->udp_ports.ddir, dev, &nsim_udp_tunnels_info_reset_fops); /* Note: it's not normal to allocate the info struct like this! @@ -196,6 +198,9 @@ int nsim_udp_tunnels_info_create(struct nsim_dev *nsim_dev, void nsim_udp_tunnels_info_destroy(struct net_device *dev) { + struct netdevsim *ns = netdev_priv(dev); + + debugfs_remove_recursive(ns->udp_ports.ddir); kfree(dev->udp_tunnel_nic_info); dev->udp_tunnel_nic_info = NULL; } diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh index 384cfa3d38a6..92c2f0376c08 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh @@ -142,7 +142,7 @@ function pre_ethtool { } function check_table { - local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1 + local path=$NSIM_DEV_DFS/ports/$port/udp_ports/table$1 local -n expected=$2 local last=$3 @@ -212,7 +212,7 @@ function check_tables { } function print_table { - local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1 + local path=$NSIM_DEV_DFS/ports/$port/udp_ports/table$1 read -a have < $path tree $NSIM_DEV_DFS/ @@ -641,7 +641,7 @@ for port in 0 1; do NSIM_NETDEV=`get_netdev_name old_netdevs` ip link set dev $NSIM_NETDEV up - echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error + echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports/inject_error msg="1 - create VxLANs v6" exp0=( 0 0 0 0 ) @@ -663,7 +663,7 @@ for port in 0 1; do new_geneve gnv0 20000 msg="2 - destroy GENEVE" - echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error + echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports/inject_error exp1=( `mke 20000 2` 0 0 0 ) del_dev gnv0 @@ -764,7 +764,7 @@ for port in 0 1; do msg="create VxLANs v4" new_vxlan vxlan0 10000 $NSIM_NETDEV - echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset check_tables msg="NIC device goes down" @@ -775,7 +775,7 @@ for port in 0 1; do fi check_tables - echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset check_tables msg="NIC device goes up again" @@ -789,7 +789,7 @@ for port in 0 1; do del_dev vxlan0 check_tables - echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset check_tables msg="destroy NIC" @@ -896,7 +896,7 @@ msg="vacate VxLAN in overflow table" exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` ) del_dev vxlan2 -echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset +echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset check_tables msg="tunnels destroyed 2" -- 2.48.1

3 months

3
2
0 0

[PATCH bpf-next v6 0/4] xsk: TX metadata Launch Time support

by Song Yoong Siang

This series expands the XDP TX metadata framework to allow user applications to pass per packet 64-bit launch time directly to the kernel driver, requesting launch time hardware offload support. The XDP TX metadata framework will not perform any clock conversion or packet reordering. Please note that the role of Tx metadata is just to pass the launch time, not to enable the offload feature. Users will need to enable the launch time hardware offload feature of the device by using the respective command, such as the tc-etf command. Although some devices use the tc-etf command to enable their launch time hardware offload feature, xsk packets will not go through the etf qdisc. Therefore, in my opinion, the launch time should always be based on the PTP Hardware Clock (PHC). Thus, i did not include a clock ID to indicate the clock source. To simplify the test steps, I modified the xdp_hw_metadata bpf self-test tool in such a way that it will set the launch time based on the offset provided by the user and the value of the Receive Hardware Timestamp, which is against the PHC. This will eliminate the need to discipline System Clock with the PHC and then use clock_gettime() to get the time. Please note that AF_XDP lacks a feedback mechanism to inform the application if the requested launch time is invalid. So, users are expected to familiar with the horizon of the launch time of the device they use and not request a launch time that is beyond the horizon. Otherwise, the driver might interpret the launch time incorrectly and react wrongly. For stmmac and igc, where modulo computation is used, a launch time larger than the horizon will cause the device to transmit the packet earlier that the requested launch time. Although there is no feedback mechanism for the launch time request for now, user still can check whether the requested launch time is working or not, by requesting the Transmit Completion Hardware Timestamp. Changes since v1: - renamed to use Earliest TxTime First (Willem) - renamed to use txtime (Willem) Changes since v2: - renamed to use launch time (Jesper & Willem) - changed the default launch time in xdp_hw_metadata apps from 1s to 0.1s because some NICs do not support such a large future time. Changes since v3: - added XDP launch time support to the igc driver (Jesper & Florian) - added per-driver launch time limitation on xsk-tx-metadata.rst (Jesper) - added explanation on FIFO behavior on xsk-tx-metadata.rst (Jakub) - added step to enable launch time in the commit message (Jesper & Willem) - explicitly documented the type of launch_time and which clock source it is against (Willem) Changes since v4: - change netdev feature name from tx-launch-time to tx-launch-time-fifo to explicitly state the FIFO behaviour (Stanislav) - improve the looping of xdp_hw_metadata app to wait for packet tx completion to be more readable by using clock_gettime() (Stanislav) - add launch time setup steps into xdp_hw_metadata app (Stanislav) Changes since v5: - fix selftest build errors by using asprintf() and realloc() instead of managing the buffer sizes manually (Daniel, Stanislav) v1: https://patchwork.kernel.org/project/netdevbpf/cover/20231130162028.852006-… v2: https://patchwork.kernel.org/project/netdevbpf/cover/20231201062421.1074768… v3: https://patchwork.kernel.org/project/netdevbpf/cover/20231203165129.1740512… v4: https://patchwork.kernel.org/project/netdevbpf/cover/20250106135506.9687-1-… v5: https://patchwork.kernel.org/project/netdevbpf/cover/20250114152718.120588-… Song Yoong Siang (4): xsk: Add launch time hardware offload support to XDP Tx metadata selftests/bpf: Add launch time request to xdp_hw_metadata net: stmmac: Add launch time support to XDP ZC igc: Add launch time support to XDP ZC Documentation/netlink/specs/netdev.yaml | 4 + Documentation/networking/xsk-tx-metadata.rst | 62 +++++++ drivers/net/ethernet/intel/igc/igc_main.c | 78 +++++--- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 + .../net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++ include/net/xdp_sock.h | 10 ++ include/net/xdp_sock_drv.h | 1 + include/uapi/linux/if_xdp.h | 10 ++ include/uapi/linux/netdev.h | 3 + net/core/netdev-genl.c | 2 + net/xdp/xsk.c | 3 + tools/include/uapi/linux/if_xdp.h | 10 ++ tools/include/uapi/linux/netdev.h | 3 + tools/testing/selftests/bpf/xdp_hw_metadata.c | 168 +++++++++++++++++- 14 files changed, 342 insertions(+), 27 deletions(-) -- 2.34.1

3 months

9
17
0 0

[PATCH] firmware: cs_dsp: FW_CS_DSP_KUNIT_TEST should not select REGMAP

by Geert Uytterhoeven

Enabling a (modular) test should not silently enable additional kernel functionality, as that may increase the attack vector of a product. Fix this by making FW_CS_DSP_KUNIT_TEST (and FW_CS_DSP_KUNIT_TEST_UTILS) depend on REGMAP instead of selecting it. After this, one can safely enable CONFIG_KUNIT_ALL_TESTS=m to build modules for all appropriate tests for ones system, without pulling in extra unwanted functionality, while still allowing a tester to manually enable REGMAP_BUILD and this test suite on a system where REGMAP is not enabled by default. Fixes: dd0b6b1f29b92202 ("firmware: cs_dsp: Add KUnit testing of bin file download") Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> --- See also commits 70a640c0efa76674 ("regmap: REGMAP_KUNIT should not select REGMAP") and 47ee108a113c72e ("regmap: Provide user selectable option to enable regmap"). BTW, what's the point in having separate FW_CS_DSP_KUNIT_TEST and FW_CS_DSP_KUNIT_TEST_UTILS symbols? They are always enabled or disabled together. --- drivers/firmware/cirrus/Kconfig | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/firmware/cirrus/Kconfig b/drivers/firmware/cirrus/Kconfig index ee09269c63b51173..0a883091259a2c11 100644 --- a/drivers/firmware/cirrus/Kconfig +++ b/drivers/firmware/cirrus/Kconfig @@ -6,15 +6,13 @@ config FW_CS_DSP config FW_CS_DSP_KUNIT_TEST_UTILS tristate - depends on KUNIT - select REGMAP + depends on KUNIT && REGMAP select FW_CS_DSP config FW_CS_DSP_KUNIT_TEST tristate "KUnit tests for Cirrus Logic cs_dsp" if !KUNIT_ALL_TESTS - depends on KUNIT + depends on KUNIT && REGMAP default KUNIT_ALL_TESTS - select REGMAP select FW_CS_DSP select FW_CS_DSP_KUNIT_TEST_UTILS help -- 2.43.0

3 months

2
1
0 0

[PATCH v2] selftests: tpm2: create a dedicated .gitignore

by Khaled Elnaggar

Create a dedicated .gitignore for the tpm2 tests. Move tpm2 related entries from parent directory's .gitignore. Signed-off-by: Khaled Elnaggar <khaledelnaggarlinux(a)gmail.com> --- Hello, as per Shuah's review, instead of adding another entry at selftests/.gitignore, I created the dedicated .gitignore for tpm2 tests. Aside: CCing linux-kernel-mentees as I am working on the mentorship application tasks. Thanks Changes in v2: - Created a dedicated .gitignore --- tools/testing/selftests/.gitignore | 1 - tools/testing/selftests/tpm2/.gitignore | 4 ++++ 2 files changed, 4 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/tpm2/.gitignore diff --git a/tools/testing/selftests/.gitignore b/tools/testing/selftests/.gitignore index cb24124ac5b9..674aaa02e396 100644 --- a/tools/testing/selftests/.gitignore +++ b/tools/testing/selftests/.gitignore @@ -4,7 +4,6 @@ gpiogpio-hammer gpioinclude/ gpiolsgpio kselftest_install/ -tpm2/SpaceTest.log # Python bytecode and cache __pycache__/ diff --git a/tools/testing/selftests/tpm2/.gitignore b/tools/testing/selftests/tpm2/.gitignore new file mode 100644 index 000000000000..910bbdbb336a --- /dev/null +++ b/tools/testing/selftests/tpm2/.gitignore @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +AsyncTest.log +SpaceTest.log + -- 2.45.2

3 months

2
11
0 0

[PATCH v6 0/3] selftests/lam: get_user additions and LAM enabled check

by Maciej Wieczor-Retman

Changes in v6: - Move la57 check to using mmap(). - Merge kernel_has_lam() and cpu_has_lam() into lam_is_available() since the syscall (if CONFIG_ADDRESS_MASKING is set) and cpuid check provides the same information. Recent change in how get_user() handles pointers [1] has a specific case for LAM. It assigns a different bitmask that's later used to check whether a pointer comes from userland in get_user(). While currently commented out (until LASS [2] is merged into the kernel) it's worth making changes to the LAM selftest ahead of time. Modify cpu_has_la57() so it provides current paging level information instead of the cpuid one. Add test case to LAM that utilizes a ioctl (FIOASYNC) syscall which uses get_user() in its implementation. Execute the syscall with differently tagged pointers to verify that valid user pointers are passing through and invalid kernel/non-canonical pointers are not. Also to avoid unhelpful test failures add a check in main() to skip running tests if LAM was not compiled into the kernel. Code was tested on a Sierra Forest Xeon machine that's LAM capable. The test was ran without issues with both the LAM lines from [1] untouched and commented out. The test was also ran without issues with LAM_SUP both enabled and disabled. 4/5 level pagetables code paths were also successfully tested in Simics on a 5-level capable machine. [1] https://lore.kernel.org/all/20241024013214.129639-1-torvalds@linux-foundati… [2] https://lore.kernel.org/all/20241028160917.1380714-1-alexander.shishkin@lin… Previous series entries: [v1] https://lore.kernel.org/all/20241029141421.715686-1-maciej.wieczor-retman@i… [v2] https://lore.kernel.org/all/20241121090651.254054-1-maciej.wieczor-retman@i… [v3] https://lore.kernel.org/all/20241122085521.270802-1-maciej.wieczor-retman@i… [v4] https://lore.kernel.org/all/cover.1732627541.git.maciej.wieczor-retman@inte… [v5] https://lore.kernel.org/all/cover.1732728879.git.maciej.wieczor-retman@inte… Maciej Wieczor-Retman (3): selftests/lam: Move cpu_has_la57() to use cpuinfo flag selftests/lam: Skip test if LAM is disabled selftests/lam: Test get_user() LAM pointer handling tools/testing/selftests/x86/lam.c | 147 +++++++++++++++++++++++++++--- 1 file changed, 136 insertions(+), 11 deletions(-) -- 2.47.1

3 months

1
3
0 0

[PATCH 1/2] selftests/bpf: Define SYS_PREFIX for powerpc

by Saket Kumar Bhaskar

Since commit 7e92e01b7245 ("powerpc: Provide syscall wrapper") landed in v6.1, syscall wrapper is enabled on powerpc. Commit 94746890202c ("powerpc: Don't add __powerpc_ prefix to syscall entry points"), that drops the prefix to syscall entry points, also landed in the same release. So, add the missing empty SYS_PREFIX prefix definition for powerpc, to fix some fentry and kprobe selftests. Signed-off-by: Saket Kumar Bhaskar <skb99(a)linux.ibm.com> --- tools/testing/selftests/bpf/progs/bpf_misc.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/selftests/bpf/progs/bpf_misc.h b/tools/testing/selftests/bpf/progs/bpf_misc.h index f45f4352f..02c9f7964 100644 --- a/tools/testing/selftests/bpf/progs/bpf_misc.h +++ b/tools/testing/selftests/bpf/progs/bpf_misc.h @@ -172,6 +172,9 @@ #elif defined(__TARGET_ARCH_riscv) #define SYSCALL_WRAPPER 1 #define SYS_PREFIX "__riscv_" +#elif defined(__TARGET_ARCH_powerpc) +#define SYSCALL_WRAPPER 1 +#define SYS_PREFIX "" #else #define SYSCALL_WRAPPER 0 #define SYS_PREFIX "__se_" -- 2.43.5

3 months

2
3
0 0

[PATCH v2] selftests: livepatch: handle PRINTK_CALLER in check_result()

by Madhavan Srinivasan

Some arch configs (like ppc64) enable CONFIG_PRINTK_CALLER, which adds the caller id as part of the dmesg. With recent util-linux's update 467a5b3192f16 ('dmesg: add caller_id support') the standard "dmesg" has been enhanced to print PRINTK_CALLER fields. Due to this, even though the expected vs observed are same, end testcase results are failed. -% insmod test_modules/test_klp_livepatch.ko -livepatch: enabling patch 'test_klp_livepatch' -livepatch: 'test_klp_livepatch': initializing patching transition -livepatch: 'test_klp_livepatch': starting patching transition -livepatch: 'test_klp_livepatch': completing patching transition -livepatch: 'test_klp_livepatch': patching complete -% echo 0 > /sys/kernel/livepatch/test_klp_livepatch/enabled -livepatch: 'test_klp_livepatch': initializing unpatching transition -livepatch: 'test_klp_livepatch': starting unpatching transition -livepatch: 'test_klp_livepatch': completing unpatching transition -livepatch: 'test_klp_livepatch': unpatching complete -% rmmod test_klp_livepatch +[ T3659] % insmod test_modules/test_klp_livepatch.ko +[ T3682] livepatch: enabling patch 'test_klp_livepatch' +[ T3682] livepatch: 'test_klp_livepatch': initializing patching transition +[ T3682] livepatch: 'test_klp_livepatch': starting patching transition +[ T826] livepatch: 'test_klp_livepatch': completing patching transition +[ T826] livepatch: 'test_klp_livepatch': patching complete +[ T3659] % echo 0 > /sys/kernel/livepatch/test_klp_livepatch/enabled +[ T3659] livepatch: 'test_klp_livepatch': initializing unpatching transition +[ T3659] livepatch: 'test_klp_livepatch': starting unpatching transition +[ T789] livepatch: 'test_klp_livepatch': completing unpatching transition +[ T789] livepatch: 'test_klp_livepatch': unpatching complete +[ T3659] % rmmod test_klp_livepatch ERROR: livepatch kselftest(s) failed not ok 1 selftests: livepatch: test-livepatch.sh # exit=1 Currently the check_result() handles the "[time]" removal from the dmesg. Enhance the check to also handle removal of "[Thread Id]" or "[CPU Id]". Signed-off-by: Madhavan Srinivasan <maddy(a)linux.ibm.com> --- Changelog v1: - Modified commit message to include util-linux commit that updated dmesg to support printing of PRINTK_CALLER fields. - Updated the check to include "CPU Id" along with "Thread Id" tools/testing/selftests/livepatch/functions.sh | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/livepatch/functions.sh b/tools/testing/selftests/livepatch/functions.sh index e5d06fb40233..15601402dee6 100644 --- a/tools/testing/selftests/livepatch/functions.sh +++ b/tools/testing/selftests/livepatch/functions.sh @@ -306,7 +306,8 @@ function check_result { result=$(dmesg | awk -v last_dmesg="$LAST_DMESG" 'p; $0 == last_dmesg { p=1 }' | \ grep -e 'livepatch:' -e 'test_klp' | \ grep -v '$tainting\|taints$ kernel' | \ - sed 's/^\[[ 0-9.]*\] //') + sed 's/^\[[ 0-9.]*\] //' | \ + sed 's/^\[[ ]*[CT][0-9]*\] //') if [[ "$expect" == "$result" ]] ; then echo "ok" -- 2.47.0

3 months

3
4
0 0

[PATCH AUTOSEL 6.13 02/16] bpf: Improve verifier log for resource leak on exit

by Sasha Levin

From: Kumar Kartikeya Dwivedi <memxor(a)gmail.com> [ Upstream commit cbd8730aea8d79cda6b0f3c18b406dfdef0c1b80 ] The verifier log when leaking resources on BPF_EXIT may be a bit confusing, as it's a problem only when finally existing from the main prog, not from any of the subprogs. Hence, update the verifier error string and the corresponding selftests matching on it. Acked-by: Eduard Zingerman <eddyz87(a)gmail.com> Suggested-by: Eduard Zingerman <eddyz87(a)gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor(a)gmail.com> Link: https://lore.kernel.org/r/20241204030400.208005-6-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- kernel/bpf/verifier.c | 2 +- .../testing/selftests/bpf/progs/exceptions_fail.c | 4 ++-- tools/testing/selftests/bpf/progs/preempt_lock.c | 14 +++++++------- .../selftests/bpf/progs/verifier_spin_lock.c | 2 +- 4 files changed, 11 insertions(+), 11 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 77f56674aaa99..4f02345b764fd 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -18803,7 +18803,7 @@ static int do_check(struct bpf_verifier_env *env) * match caller reference state when it exits. */ err = check_resource_leak(env, exception_exit, !env->cur_state->curframe, - "BPF_EXIT instruction"); + "BPF_EXIT instruction in main prog"); if (err) return err; diff --git a/tools/testing/selftests/bpf/progs/exceptions_fail.c b/tools/testing/selftests/bpf/progs/exceptions_fail.c index fe0f3fa5aab68..8a0fdff899271 100644 --- a/tools/testing/selftests/bpf/progs/exceptions_fail.c +++ b/tools/testing/selftests/bpf/progs/exceptions_fail.c @@ -131,7 +131,7 @@ int reject_subprog_with_lock(void *ctx) } SEC("?tc") -__failure __msg("BPF_EXIT instruction cannot be used inside bpf_rcu_read_lock-ed region") +__failure __msg("BPF_EXIT instruction in main prog cannot be used inside bpf_rcu_read_lock-ed region") int reject_with_rcu_read_lock(void *ctx) { bpf_rcu_read_lock(); @@ -147,7 +147,7 @@ __noinline static int throwing_subprog(struct __sk_buff *ctx) } SEC("?tc") -__failure __msg("BPF_EXIT instruction cannot be used inside bpf_rcu_read_lock-ed region") +__failure __msg("BPF_EXIT instruction in main prog cannot be used inside bpf_rcu_read_lock-ed region") int reject_subprog_with_rcu_read_lock(void *ctx) { bpf_rcu_read_lock(); diff --git a/tools/testing/selftests/bpf/progs/preempt_lock.c b/tools/testing/selftests/bpf/progs/preempt_lock.c index 885377e836077..5269571cf7b57 100644 --- a/tools/testing/selftests/bpf/progs/preempt_lock.c +++ b/tools/testing/selftests/bpf/progs/preempt_lock.c @@ -6,7 +6,7 @@ #include "bpf_experimental.h" SEC("?tc") -__failure __msg("BPF_EXIT instruction cannot be used inside bpf_preempt_disable-ed region") +__failure __msg("BPF_EXIT instruction in main prog cannot be used inside bpf_preempt_disable-ed region") int preempt_lock_missing_1(struct __sk_buff *ctx) { bpf_preempt_disable(); @@ -14,7 +14,7 @@ int preempt_lock_missing_1(struct __sk_buff *ctx) } SEC("?tc") -__failure __msg("BPF_EXIT instruction cannot be used inside bpf_preempt_disable-ed region") +__failure __msg("BPF_EXIT instruction in main prog cannot be used inside bpf_preempt_disable-ed region") int preempt_lock_missing_2(struct __sk_buff *ctx) { bpf_preempt_disable(); @@ -23,7 +23,7 @@ int preempt_lock_missing_2(struct __sk_buff *ctx) } SEC("?tc") -__failure __msg("BPF_EXIT instruction cannot be used inside bpf_preempt_disable-ed region") +__failure __msg("BPF_EXIT instruction in main prog cannot be used inside bpf_preempt_disable-ed region") int preempt_lock_missing_3(struct __sk_buff *ctx) { bpf_preempt_disable(); @@ -33,7 +33,7 @@ int preempt_lock_missing_3(struct __sk_buff *ctx) } SEC("?tc") -__failure __msg("BPF_EXIT instruction cannot be used inside bpf_preempt_disable-ed region") +__failure __msg("BPF_EXIT instruction in main prog cannot be used inside bpf_preempt_disable-ed region") int preempt_lock_missing_3_minus_2(struct __sk_buff *ctx) { bpf_preempt_disable(); @@ -55,7 +55,7 @@ static __noinline void preempt_enable(void) } SEC("?tc") -__failure __msg("BPF_EXIT instruction cannot be used inside bpf_preempt_disable-ed region") +__failure __msg("BPF_EXIT instruction in main prog cannot be used inside bpf_preempt_disable-ed region") int preempt_lock_missing_1_subprog(struct __sk_buff *ctx) { preempt_disable(); @@ -63,7 +63,7 @@ int preempt_lock_missing_1_subprog(struct __sk_buff *ctx) } SEC("?tc") -__failure __msg("BPF_EXIT instruction cannot be used inside bpf_preempt_disable-ed region") +__failure __msg("BPF_EXIT instruction in main prog cannot be used inside bpf_preempt_disable-ed region") int preempt_lock_missing_2_subprog(struct __sk_buff *ctx) { preempt_disable(); @@ -72,7 +72,7 @@ int preempt_lock_missing_2_subprog(struct __sk_buff *ctx) } SEC("?tc") -__failure __msg("BPF_EXIT instruction cannot be used inside bpf_preempt_disable-ed region") +__failure __msg("BPF_EXIT instruction in main prog cannot be used inside bpf_preempt_disable-ed region") int preempt_lock_missing_2_minus_1_subprog(struct __sk_buff *ctx) { preempt_disable(); diff --git a/tools/testing/selftests/bpf/progs/verifier_spin_lock.c b/tools/testing/selftests/bpf/progs/verifier_spin_lock.c index 3f679de73229f..25599eac9a702 100644 --- a/tools/testing/selftests/bpf/progs/verifier_spin_lock.c +++ b/tools/testing/selftests/bpf/progs/verifier_spin_lock.c @@ -187,7 +187,7 @@ l0_%=: r6 = r0; \ SEC("cgroup/skb") __description("spin_lock: test6 missing unlock") -__failure __msg("BPF_EXIT instruction cannot be used inside bpf_spin_lock-ed region") +__failure __msg("BPF_EXIT instruction in main prog cannot be used inside bpf_spin_lock-ed region") __failure_unpriv __msg_unpriv("") __naked void spin_lock_test6_missing_unlock(void) { -- 2.39.5

3 months

1
0
0 0

[PATCH AUTOSEL 5.10 12/12] selftests/net/ipsec: Fix Null pointer dereference in rtattr_pack()

by Sasha Levin

From: Liu Ye <liuye(a)kylinos.cn> [ Upstream commit 3a0b7fa095212b51ed63892540c4f249991a2d74 ] Address Null pointer dereference / undefined behavior in rtattr_pack (note that size is 0 in the bad case). Flagged by cppcheck as: tools/testing/selftests/net/ipsec.c:230:25: warning: Possible null pointer dereference: payload [nullPointer] memcpy(RTA_DATA(attr), payload, size); ^ tools/testing/selftests/net/ipsec.c:1618:54: note: Calling function 'rtattr_pack', 4th argument 'NULL' value is 0 if (rtattr_pack(&req.nh, sizeof(req), XFRMA_IF_ID, NULL, 0)) { ^ tools/testing/selftests/net/ipsec.c:230:25: note: Null pointer dereference memcpy(RTA_DATA(attr), payload, size); ^ Signed-off-by: Liu Ye <liuye(a)kylinos.cn> Link: https://patch.msgid.link/20250116013037.29470-1-liuye@kylinos.cn Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/net/ipsec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/ipsec.c b/tools/testing/selftests/net/ipsec.c index 03b048b668315..38f0de299605a 100644 --- a/tools/testing/selftests/net/ipsec.c +++ b/tools/testing/selftests/net/ipsec.c @@ -189,7 +189,8 @@ static int rtattr_pack(struct nlmsghdr *nh, size_t req_sz, attr->rta_len = RTA_LENGTH(size); attr->rta_type = rta_type; - memcpy(RTA_DATA(attr), payload, size); + if (payload) + memcpy(RTA_DATA(attr), payload, size); return 0; } -- 2.39.5

3 months

1
0
0 0

[PATCH AUTOSEL 5.15 14/14] selftests/net/ipsec: Fix Null pointer dereference in rtattr_pack()

by Sasha Levin

From: Liu Ye <liuye(a)kylinos.cn> [ Upstream commit 3a0b7fa095212b51ed63892540c4f249991a2d74 ] Address Null pointer dereference / undefined behavior in rtattr_pack (note that size is 0 in the bad case). Flagged by cppcheck as: tools/testing/selftests/net/ipsec.c:230:25: warning: Possible null pointer dereference: payload [nullPointer] memcpy(RTA_DATA(attr), payload, size); ^ tools/testing/selftests/net/ipsec.c:1618:54: note: Calling function 'rtattr_pack', 4th argument 'NULL' value is 0 if (rtattr_pack(&req.nh, sizeof(req), XFRMA_IF_ID, NULL, 0)) { ^ tools/testing/selftests/net/ipsec.c:230:25: note: Null pointer dereference memcpy(RTA_DATA(attr), payload, size); ^ Signed-off-by: Liu Ye <liuye(a)kylinos.cn> Link: https://patch.msgid.link/20250116013037.29470-1-liuye@kylinos.cn Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/net/ipsec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/ipsec.c b/tools/testing/selftests/net/ipsec.c index c5be3f390849b..ae3da27b00973 100644 --- a/tools/testing/selftests/net/ipsec.c +++ b/tools/testing/selftests/net/ipsec.c @@ -189,7 +189,8 @@ static int rtattr_pack(struct nlmsghdr *nh, size_t req_sz, attr->rta_len = RTA_LENGTH(size); attr->rta_type = rta_type; - memcpy(RTA_DATA(attr), payload, size); + if (payload) + memcpy(RTA_DATA(attr), payload, size); return 0; } -- 2.39.5

3 months

1
0
0 0

[PATCH AUTOSEL 6.1 17/17] selftests/net/ipsec: Fix Null pointer dereference in rtattr_pack()

by Sasha Levin

From: Liu Ye <liuye(a)kylinos.cn> [ Upstream commit 3a0b7fa095212b51ed63892540c4f249991a2d74 ] Address Null pointer dereference / undefined behavior in rtattr_pack (note that size is 0 in the bad case). Flagged by cppcheck as: tools/testing/selftests/net/ipsec.c:230:25: warning: Possible null pointer dereference: payload [nullPointer] memcpy(RTA_DATA(attr), payload, size); ^ tools/testing/selftests/net/ipsec.c:1618:54: note: Calling function 'rtattr_pack', 4th argument 'NULL' value is 0 if (rtattr_pack(&req.nh, sizeof(req), XFRMA_IF_ID, NULL, 0)) { ^ tools/testing/selftests/net/ipsec.c:230:25: note: Null pointer dereference memcpy(RTA_DATA(attr), payload, size); ^ Signed-off-by: Liu Ye <liuye(a)kylinos.cn> Link: https://patch.msgid.link/20250116013037.29470-1-liuye@kylinos.cn Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/net/ipsec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/ipsec.c b/tools/testing/selftests/net/ipsec.c index be4a30a0d02ae..9b44a091802cb 100644 --- a/tools/testing/selftests/net/ipsec.c +++ b/tools/testing/selftests/net/ipsec.c @@ -227,7 +227,8 @@ static int rtattr_pack(struct nlmsghdr *nh, size_t req_sz, attr->rta_len = RTA_LENGTH(size); attr->rta_type = rta_type; - memcpy(RTA_DATA(attr), payload, size); + if (payload) + memcpy(RTA_DATA(attr), payload, size); return 0; } -- 2.39.5

3 months

1
0
0 0

[PATCH AUTOSEL 6.6 19/19] selftests/net/ipsec: Fix Null pointer dereference in rtattr_pack()

by Sasha Levin

From: Liu Ye <liuye(a)kylinos.cn> [ Upstream commit 3a0b7fa095212b51ed63892540c4f249991a2d74 ] Address Null pointer dereference / undefined behavior in rtattr_pack (note that size is 0 in the bad case). Flagged by cppcheck as: tools/testing/selftests/net/ipsec.c:230:25: warning: Possible null pointer dereference: payload [nullPointer] memcpy(RTA_DATA(attr), payload, size); ^ tools/testing/selftests/net/ipsec.c:1618:54: note: Calling function 'rtattr_pack', 4th argument 'NULL' value is 0 if (rtattr_pack(&req.nh, sizeof(req), XFRMA_IF_ID, NULL, 0)) { ^ tools/testing/selftests/net/ipsec.c:230:25: note: Null pointer dereference memcpy(RTA_DATA(attr), payload, size); ^ Signed-off-by: Liu Ye <liuye(a)kylinos.cn> Link: https://patch.msgid.link/20250116013037.29470-1-liuye@kylinos.cn Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/net/ipsec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/ipsec.c b/tools/testing/selftests/net/ipsec.c index be4a30a0d02ae..9b44a091802cb 100644 --- a/tools/testing/selftests/net/ipsec.c +++ b/tools/testing/selftests/net/ipsec.c @@ -227,7 +227,8 @@ static int rtattr_pack(struct nlmsghdr *nh, size_t req_sz, attr->rta_len = RTA_LENGTH(size); attr->rta_type = rta_type; - memcpy(RTA_DATA(attr), payload, size); + if (payload) + memcpy(RTA_DATA(attr), payload, size); return 0; } -- 2.39.5

3 months

1
0
0 0

[PATCH AUTOSEL 6.12 28/29] selftests/net/ipsec: Fix Null pointer dereference in rtattr_pack()

by Sasha Levin

From: Liu Ye <liuye(a)kylinos.cn> [ Upstream commit 3a0b7fa095212b51ed63892540c4f249991a2d74 ] Address Null pointer dereference / undefined behavior in rtattr_pack (note that size is 0 in the bad case). Flagged by cppcheck as: tools/testing/selftests/net/ipsec.c:230:25: warning: Possible null pointer dereference: payload [nullPointer] memcpy(RTA_DATA(attr), payload, size); ^ tools/testing/selftests/net/ipsec.c:1618:54: note: Calling function 'rtattr_pack', 4th argument 'NULL' value is 0 if (rtattr_pack(&req.nh, sizeof(req), XFRMA_IF_ID, NULL, 0)) { ^ tools/testing/selftests/net/ipsec.c:230:25: note: Null pointer dereference memcpy(RTA_DATA(attr), payload, size); ^ Signed-off-by: Liu Ye <liuye(a)kylinos.cn> Link: https://patch.msgid.link/20250116013037.29470-1-liuye@kylinos.cn Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/net/ipsec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/ipsec.c b/tools/testing/selftests/net/ipsec.c index be4a30a0d02ae..9b44a091802cb 100644 --- a/tools/testing/selftests/net/ipsec.c +++ b/tools/testing/selftests/net/ipsec.c @@ -227,7 +227,8 @@ static int rtattr_pack(struct nlmsghdr *nh, size_t req_sz, attr->rta_len = RTA_LENGTH(size); attr->rta_type = rta_type; - memcpy(RTA_DATA(attr), payload, size); + if (payload) + memcpy(RTA_DATA(attr), payload, size); return 0; } -- 2.39.5

3 months

1
0
0 0

[PATCH AUTOSEL 6.13 34/35] selftests/net/ipsec: Fix Null pointer dereference in rtattr_pack()

by Sasha Levin

From: Liu Ye <liuye(a)kylinos.cn> [ Upstream commit 3a0b7fa095212b51ed63892540c4f249991a2d74 ] Address Null pointer dereference / undefined behavior in rtattr_pack (note that size is 0 in the bad case). Flagged by cppcheck as: tools/testing/selftests/net/ipsec.c:230:25: warning: Possible null pointer dereference: payload [nullPointer] memcpy(RTA_DATA(attr), payload, size); ^ tools/testing/selftests/net/ipsec.c:1618:54: note: Calling function 'rtattr_pack', 4th argument 'NULL' value is 0 if (rtattr_pack(&req.nh, sizeof(req), XFRMA_IF_ID, NULL, 0)) { ^ tools/testing/selftests/net/ipsec.c:230:25: note: Null pointer dereference memcpy(RTA_DATA(attr), payload, size); ^ Signed-off-by: Liu Ye <liuye(a)kylinos.cn> Link: https://patch.msgid.link/20250116013037.29470-1-liuye@kylinos.cn Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/net/ipsec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/ipsec.c b/tools/testing/selftests/net/ipsec.c index be4a30a0d02ae..9b44a091802cb 100644 --- a/tools/testing/selftests/net/ipsec.c +++ b/tools/testing/selftests/net/ipsec.c @@ -227,7 +227,8 @@ static int rtattr_pack(struct nlmsghdr *nh, size_t req_sz, attr->rta_len = RTA_LENGTH(size); attr->rta_type = rta_type; - memcpy(RTA_DATA(attr), payload, size); + if (payload) + memcpy(RTA_DATA(attr), payload, size); return 0; } -- 2.39.5

3 months

1
0
0 0

[PATCH 0/7] bpf: Add probe_read_{kernel,user}_dynptr and copy_from_user_dynptr

by Levi Zim via B4 Relay

This series introduce the dynptr counterpart of the bpf_probe_read_{kernel,user} helpers and bpf_copy_from_user helper. These helpers are helpful for reading variable-length data from kernel memory into dynptr without going through an intermediate buffer. Link: https://lore.kernel.org/bpf/MEYP282MB2312CFCE5F7712FDE313215AC64D2@MEYP282M… Suggested-by: Andrii Nakryiko <andrii.nakryiko(a)gmail.com> Signed-off-by: Levi Zim <rsworktech(a)outlook.com> --- Levi Zim (7): bpf: Implement bpf_probe_read_kernel_dynptr helper bpf: Implement bpf_probe_read_user_dynptr helper bpf: Implement bpf_copy_from_user_dynptr helper tools headers UAPI: Update tools's copy of bpf.h header selftests/bpf: probe_read_kernel_dynptr test selftests/bpf: probe_read_user_dynptr test selftests/bpf: copy_from_user_dynptr test include/linux/bpf.h | 3 + include/uapi/linux/bpf.h | 49 ++++++++++ kernel/bpf/helpers.c | 53 ++++++++++- kernel/trace/bpf_trace.c | 72 ++++++++++++++ tools/include/uapi/linux/bpf.h | 49 ++++++++++ tools/testing/selftests/bpf/prog_tests/dynptr.c | 45 ++++++++- tools/testing/selftests/bpf/progs/dynptr_success.c | 106 +++++++++++++++++++++ 7 files changed, 374 insertions(+), 3 deletions(-) --- base-commit: d0d106a2bd21499901299160744e5fe9f4c83ddb change-id: 20250124-bpf_dynptr_probe-ab483c554f1a Best regards, -- Levi Zim <rsworktech(a)outlook.com>

3 months

1
7
0 0

[PATCHv2 net] Bonding: Fix support for gso_partial_features

by Hangbin Liu

The fixed commit adds NETIF_F_GSO_ESP bit for bonding gso_partial_features. However, if we don't set the dev NETIF_F_GSO_PARTIAL bit, the later netdev_change_features() -> netdev_fix_features() will remove the NETIF_F_GSO_ESP bit from the dev features. This causes ethtool to show that the bond does not support tx-esp-segmentation. For example # ethtool -k bond0 | grep esp tx-esp-segmentation: off [requested on] esp-hw-offload: on esp-tx-csum-hw-offload: on Add the NETIF_F_GSO_PARTIAL bit to bond dev features when set gso_partial_features to fix this issue. Fixes: 4861333b4217 ("bonding: add ESP offload features when slaves support") Reported-by: Liang Li <liali(a)redhat.com> Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- v2: remove NETIF_F_GSO_PARTIAL bit if not set gso_partial_features. The issue is reported internally, so there is no Closes tag. BTW, I saw some drivers set NETIF_F_GSO_PARTIAL on dev->features. Some other drivers set NETIF_F_GSO_PARTIAL on dev->hw_enc_features. I haven't see a doc about where we should set. So I just set it on dev->features. --- drivers/net/bonding/bond_main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 7b78c2bada81..09d5a8433d86 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1598,10 +1598,13 @@ static void bond_compute_features(struct bonding *bond) } bond_dev->hard_header_len = max_hard_header_len; - if (gso_partial_features & NETIF_F_GSO_ESP) + if (gso_partial_features & NETIF_F_GSO_ESP) { bond_dev->gso_partial_features |= NETIF_F_GSO_ESP; - else + bond_dev->features |= NETIF_F_GSO_PARTIAL; + } else { bond_dev->gso_partial_features &= ~NETIF_F_GSO_ESP; + bond_dev->features &= ~NETIF_F_GSO_PARTIAL; + } done: bond_dev->vlan_features = vlan_features; -- 2.39.5 (Apple Git-154)

3 months

3
5
0 0

[PATCH v5 0/3] selftests/lam: get_user additions and LAM enabled check

by Maciej Wieczor-Retman

Recent change in how get_user() handles pointers [1] has a specific case for LAM. It assigns a different bitmask that's later used to check whether a pointer comes from userland in get_user(). While currently commented out (until LASS [2] is merged into the kernel) it's worth making changes to the LAM selftest ahead of time. Modify cpu_has_la57() so it provides current paging level information instead of the cpuid one. Add test case to LAM that utilizes a ioctl (FIOASYNC) syscall which uses get_user() in its implementation. Execute the syscall with differently tagged pointers to verify that valid user pointers are passing through and invalid kernel/non-canonical pointers are not. Also to avoid unhelpful test failures add a check in main() to skip running tests if LAM was not compiled into the kernel. Code was tested on a Sierra Forest Xeon machine that's LAM capable. The test was ran without issues with both the LAM lines from [1] untouched and commented out. The test was also ran without issues with LAM_SUP both enabled and disabled. 4/5 level pagetables code paths were also successfully tested in Simics on a 5-level capable machine. [1] https://lore.kernel.org/all/20241024013214.129639-1-torvalds@linux-foundati… [2] https://lore.kernel.org/all/20241028160917.1380714-1-alexander.shishkin@lin… Maciej Wieczor-Retman (3): selftests/lam: Move cpu_has_la57() to use cpuinfo flag selftests/lam: Skip test if LAM is disabled selftests/lam: Test get_user() LAM pointer handling tools/testing/selftests/x86/lam.c | 120 ++++++++++++++++++++++++++++-- 1 file changed, 115 insertions(+), 5 deletions(-) -- 2.47.1

3 months

3
13
0 0

[PATCH net-next v2 0/5] netconsole: Add support for CPU population

by Breno Leitao

The current implementation of netconsole sends all log messages in parallel, which can lead to an intermixed and interleaved output on the receiving side. This makes it challenging to demultiplex the messages and attribute them to their originating CPUs. As a result, users and developers often struggle to effectively analyze and debug the parallel log output received through netconsole. Example of a message got from produciton hosts: ------------[ cut here ]------------ ------------[ cut here ]------------ refcount_t: saturated; leaking memory. WARNING: CPU: 2 PID: 1613668 at lib/refcount.c:22 refcount_warn_saturate+0x5e/0xe0 refcount_t: addition on 0; use-after-free. WARNING: CPU: 26 PID: 4139916 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0xe0 Modules linked in: bpf_preload(E) vhost_net(E) tun(E) vhost(E) This series of patches introduces a new feature to the netconsole subsystem that allows the automatic population of the CPU number in the userdata field for each log message. This enhancement provides several benefits: * Improved demultiplexing of parallel log output: When multiple CPUs are sending messages concurrently, the added CPU number in the userdata makes it easier to differentiate and attribute the messages to their originating CPUs. * Better visibility into message sources: The CPU number information gives users and developers more insight into which specific CPU a particular log message came from, which can be valuable for debugging and analysis. The changes in this series are as follows: Patch 1: netconsole: Rename userdata to extradata ================================================= Create the a concept of extradata, which encompasses the concept of userdata and the upcoming sysdatao Sysdata is a new concept being added, which is basically fields that are populated by the kernel. At this time only the CPU#, but, there is a desire to add current task name, kernel release version, etc. Patch 2: netconsole: Helper to count number of used entries =========================================================== Create a simple helper to count number of entries in extradata. I am separating this in a function since it will need to count userdata and sysdata. For instance, when the user adds an extra userdata, we need to check if there is space, counting the previous data entries (from userdata and cpu data) Patch 3: netconsole: add support for sysdata and CPU population =============================================================== This is the core patch. Basically add a new option to enable automatic CPU number population in the netconsole userdata Provides a new "cpu_nr" sysfs attribute to control this feature Patch 4: "netconsole: selftest: test CPU number auto-population" ============================================================= Expands the existing netconsole selftest to verify the CPU number auto-population functionality Ensures the received netconsole messages contain the expected "cpu=<CPU>" entry in the message. Test different permutation with userdata Patch 5: "netconsole: docs: Add documentation for CPU number auto-population" ============================================================================= Updates the netconsole documentation to explain the new CPU number auto-population feature Provides instructions on how to enable and use the feature I believe these changes will be a valuable addition to the netconsole subsystem, enhancing its usefulness for kernel developers and users. Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Changes in v2: - Create the concept of extradata and sysdata. This will make the design easier to understand, and the code easier to read. * Basically extradata encompasses userdata and the new sysdata. Userdata originates from user, and sysdata originates in kernel. - Improved the test to send from a very specific CPU, which can be checked to be correct on the other side, as suggested by Jakub. - Fixed a bug where CPU # was populated at the wrong place - Link to v1: https://lore.kernel.org/r/20241113-netcon_cpu-v1-0-d187bf7c0321@debian.org --- Breno Leitao (5): netconsole: Rename userdata to extradata netconsole: Helper to count number of used entries netconsole: add support for sysdata and CPU population netconsole: selftest: test for sysdata CPU netconsole: docs: Add documentation for CPU number auto-population Documentation/networking/netconsole.rst | 45 +++++ drivers/net/netconsole.c | 223 ++++++++++++++++----- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 17 ++ .../selftests/drivers/net/netcons_sysdata.sh | 166 +++++++++++++++ 5 files changed, 407 insertions(+), 45 deletions(-) --- base-commit: 7b24f164cf005b9649138ef6de94aaac49c9f3d1 change-id: 20241108-netcon_cpu-ce3917e88f4b Best regards, -- Breno Leitao <leitao(a)debian.org>

3 months

3
13
0 0

[PATCH v2 00/10] x86/module: rework ROX cache to avoid writable copy

by Mike Rapoport

From: "Mike Rapoport (Microsoft)" <rppt(a)kernel.org> Hi, Following Peter's comments [1] these patches rework handling of ROX caches for module text allocations. Instead of using a writable copy that really complicates alternatives patching, temporarily remap parts of a large ROX page as RW for the time of module formation and then restore it's ROX protections when the module is ready. To keep the ROX memory mapped with large pages, make set_memory_rox() capable of restoring large pages (more details are in patch 3). Since this is really about x86, I believe this should go in via tip tree. The patches also available in git https://git.kernel.org/rppt/h/execmem/x86-rox/v9 v2 changes: * only collapse large mappings in set_memory_rox() * simplify RW <-> ROX remapping * don't remove ROX cache pages from the direct map (patch 4) v1: https://lore.kernel.org/all/20241227072825.1288491-1-rppt@kernel.org [1] https://lore.kernel.org/all/20241209083818.GK8562@noisy.programming.kicks-a… Kirill A. Shutemov (1): x86/mm/pat: restore large ROX pages after fragmentation Mike Rapoport (Microsoft) (9): x86/mm/pat: cpa-test: fix length for CPA_ARRAY test x86/mm/pat: drop duplicate variable in cpa_flush() execmem: don't remove ROX cache from the direct map execmem: add API for temporal remapping as RW and restoring ROX afterwards module: introduce MODULE_STATE_GONE module: switch to execmem API for remapping as RW and restoring ROX Revert "x86/module: prepare module loading for ROX allocations of text" module: drop unused module_writable_address() x86: re-enable EXECMEM_ROX support arch/um/kernel/um_arch.c | 11 +- arch/x86/Kconfig | 1 + arch/x86/entry/vdso/vma.c | 3 +- arch/x86/include/asm/alternative.h | 14 +- arch/x86/include/asm/pgtable_types.h | 2 + arch/x86/kernel/alternative.c | 181 ++++++-------- arch/x86/kernel/ftrace.c | 30 ++- arch/x86/kernel/module.c | 45 ++-- arch/x86/mm/pat/cpa-test.c | 2 +- arch/x86/mm/pat/set_memory.c | 220 +++++++++++++++++- include/linux/execmem.h | 31 +++ include/linux/module.h | 22 +- include/linux/moduleloader.h | 4 - include/linux/vm_event_item.h | 2 + kernel/module/kallsyms.c | 8 +- kernel/module/kdb.c | 2 +- kernel/module/main.c | 86 ++----- kernel/module/procfs.c | 2 +- kernel/module/strict_rwx.c | 9 +- kernel/tracepoint.c | 2 + lib/kunit/test.c | 2 + mm/execmem.c | 39 ++-- mm/vmstat.c | 2 + samples/livepatch/livepatch-callbacks-demo.c | 1 + .../test_modules/test_klp_callbacks_demo.c | 1 + .../test_modules/test_klp_callbacks_demo2.c | 1 + .../livepatch/test_modules/test_klp_state.c | 1 + .../livepatch/test_modules/test_klp_state2.c | 1 + 28 files changed, 442 insertions(+), 283 deletions(-) base-commit: ffd294d346d185b70e28b1a28abe367bbfe53c04 -- 2.45.2

3 months

4
16
0 0

[PATCH net v2] bonding: Correctly support GSO ESP offload

by Cosmin Ratiu

The referenced fix is incomplete. It correctly computes bond_dev->gso_partial_features across slaves, but unfortunately netdev_fix_features discards gso_partial_features from the feature set if NETIF_F_GSO_PARTIAL isn't set in bond_dev->features. This is visible with ethtool -k bond0 | grep esp: tx-esp-segmentation: off [requested on] esp-hw-offload: on esp-tx-csum-hw-offload: on This patch reworks the bonding GSO offload support by: - making aggregating gso_partial_features across slaves similar to the other feature sets (this part is a no-op). - advertising the default partial gso features on empty bond devs, same as with other feature sets (also a no-op). - adding NETIF_F_GSO_PARTIAL to hw_enc_features filtered across slaves. - adding NETIF_F_GSO_PARTIAL to features in bond_setup() With all of these, 'ethtool -k bond0 | grep esp' now reports: tx-esp-segmentation: on esp-hw-offload: on esp-tx-csum-hw-offload: on Fixes: 4861333b4217 ("bonding: add ESP offload features when slaves support") Signed-off-by: Cosmin Ratiu <cratiu(a)nvidia.com> --- drivers/net/bonding/bond_main.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 7b78c2bada81..e45bba240cbc 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1538,17 +1538,20 @@ static netdev_features_t bond_fix_features(struct net_device *dev, NETIF_F_HIGHDMA | NETIF_F_LRO) #define BOND_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ - NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE) + NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE | \ + NETIF_F_GSO_PARTIAL) #define BOND_MPLS_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ NETIF_F_GSO_SOFTWARE) +#define BOND_GSO_PARTIAL_FEATURES (NETIF_F_GSO_ESP) + static void bond_compute_features(struct bonding *bond) { + netdev_features_t gso_partial_features = BOND_GSO_PARTIAL_FEATURES; unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM; - netdev_features_t gso_partial_features = NETIF_F_GSO_ESP; netdev_features_t vlan_features = BOND_VLAN_FEATURES; netdev_features_t enc_features = BOND_ENC_FEATURES; #ifdef CONFIG_XFRM_OFFLOAD @@ -1582,8 +1585,9 @@ static void bond_compute_features(struct bonding *bond) BOND_XFRM_FEATURES); #endif /* CONFIG_XFRM_OFFLOAD */ - if (slave->dev->hw_enc_features & NETIF_F_GSO_PARTIAL) - gso_partial_features &= slave->dev->gso_partial_features; + gso_partial_features = netdev_increment_features(gso_partial_features, + slave->dev->gso_partial_features, + BOND_GSO_PARTIAL_FEATURES); mpls_features = netdev_increment_features(mpls_features, slave->dev->mpls_features, @@ -1598,12 +1602,8 @@ static void bond_compute_features(struct bonding *bond) } bond_dev->hard_header_len = max_hard_header_len; - if (gso_partial_features & NETIF_F_GSO_ESP) - bond_dev->gso_partial_features |= NETIF_F_GSO_ESP; - else - bond_dev->gso_partial_features &= ~NETIF_F_GSO_ESP; - done: + bond_dev->gso_partial_features = gso_partial_features; bond_dev->vlan_features = vlan_features; bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL | NETIF_F_HW_VLAN_CTAG_TX | @@ -6046,6 +6046,7 @@ void bond_setup(struct net_device *bond_dev) bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL; bond_dev->features |= bond_dev->hw_features; bond_dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX; + bond_dev->features |= NETIF_F_GSO_PARTIAL; #ifdef CONFIG_XFRM_OFFLOAD bond_dev->hw_features |= BOND_XFRM_FEATURES; /* Only enable XFRM features if this is an active-backup config */ -- 2.45.0

3 months

2
3
0 0

[PATCH bpf-next v2 00/10] selftests/bpf: Migrate test_xdp_redirect_multi.sh to test_progs

by Bastien Curutchet (eBPF Foundation)

Hi all, This patch series continues the work to migrate the *.sh tests into prog_tests framework. test_xdp_redirect_multi.sh tests the XDP redirections done through bpf_redirect_map(). This is already partly covered by test_xdp_veth.c that already tests map redirections at XDP level. What isn't covered yet by test_xdp_veth is the use of the broadcast flags (BPF_F_BROADCAST or BPF_F_EXCLUDE_INGRESS) and XDP egress programs. Hence, this patch series add test cases to test_xdp_veth.c to get rid of the test_xdp_redirect_multi.sh: - PATCH 1 to 5 rework test_xdp_veth to make it more generic and allow to configure different test cases - PATCH 6 adds test cases for 'classic' bpf_redirect_map() - PATCH 7 & 8 covers the broadcast flags - PATCH 9 covers the XDP egress programs - PATCH 10 removes test_xdp_redirect_multi.sh Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com> --- Changes in v2: - Use serial_test_* to avoid conflict between tests - Link to v1: https://lore.kernel.org/r/20250121-redirect-multi-v1-0-b215e35ff505@bootlin… --- Bastien Curutchet (eBPF Foundation) (10): selftests/bpf: test_xdp_veth: Split network configuration selftests/bpf: Remove unused argument selftests/bpf: test_xdp_veth: Rename config[] selftests/bpf: test_xdp_veth: Add prog_config[] table selftests/bpf: test_xdp_veth: Add XDP flags to prog_configuration selftests/bpf: test_xdp_veth: Add new test cases for XDP flags selftests/bpf: Optionally select broadcasting flags selftests/bpf: test_xdp_veth: Add XDP broadcast redirection tests selftests/bpf: test_xdp_veth: Add XDP program on egress test selftests/bpf: Remove test_xdp_redirect_multi.sh tools/testing/selftests/bpf/Makefile | 2 - .../selftests/bpf/prog_tests/test_xdp_veth.c | 534 +++++++++++++++++---- .../testing/selftests/bpf/progs/xdp_redirect_map.c | 89 ++++ .../selftests/bpf/progs/xdp_redirect_multi_kern.c | 41 +- .../selftests/bpf/test_xdp_redirect_multi.sh | 214 --------- tools/testing/selftests/bpf/xdp_redirect_multi.c | 226 --------- 6 files changed, 553 insertions(+), 553 deletions(-) --- base-commit: 349e0551b929b4712b4d6127f67dfa41ed48d5a2 change-id: 20250103-redirect-multi-245d6eafb5d1 Best regards, -- Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com>

3 months

3
12
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror