- Linux-kselftest-mirror - lists.linaro.org

Re: [PATCH v1] kbuild: fix sub directory output build of kselftests

by Shuah Khan

On 6/27/22 11:45 AM, Masahiro Yamada wrote: > On Tue, Jun 28, 2022 at 1:54 AM Shuah Khan <skhan(a)linuxfoundation.org> wrote: >> >> On 6/27/22 1:02 AM, Muhammad Usama Anjum wrote: >>> Build of kselftests fail if kernel's top most Makefile is used for >>> running or building kselftests with separate output directory which is >>> sub-directory. srctree is set to .. erroneously. >>> >>> make kselftest-all O=/linux_mainline/build >>> Makefile:1080: ../scripts/Makefile.extrawarn: No such file or directory >>> >>> make kselftest-all O=build >>> Makefile:1080: ../scripts/Makefile.extrawarn: No such file or directory >>> >>> Fix this by comparing abs_srctree with CURDIR instead of abs_objtree. >>> CURDIR changes based on from where the command has been run and it sets >>> the srctree correctly. >>> >>> Fixes: 25b146c5b8cee("kbuild: allow Kbuild to start from any directory") >>> Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> >>> --- >>> Changes in V2: >>> - Correct the bugfix instead of workaround >>> >>> V1: https://lore.kernel.org/lkml/20220223191016.1658728-1-usama.anjum@collabora… >>> --- >>> Makefile | 4 ++-- >>> 1 file changed, 2 insertions(+), 2 deletions(-) >>> >>> diff --git a/Makefile b/Makefile >>> index e66358b64ede..4090d7afcda4 100644 >>> --- a/Makefile >>> +++ b/Makefile >>> @@ -238,12 +238,12 @@ ifeq ($(need-sub-make),) >>> # so that IDEs/editors are able to understand relative filenames. >>> MAKEFLAGS += --no-print-directory >>> >>> -ifeq ($(abs_srctree),$(abs_objtree)) >>> +ifeq ($(abs_srctree),$(CURDIR)) >>> # building in the source tree >>> srctree := . >>> building_out_of_srctree := >>> else >>> - ifeq ($(abs_srctree)/,$(dir $(abs_objtree))) >>> + ifeq ($(abs_srctree)/,$(dir $(CURDIR))) >>> # building in a subdirectory of the source tree >>> srctree := .. >>> else >>> >> >> Please resend cc'ing linux-kselftest >> >> thanks, >> -- Shuah > > > Please do not send this any more. > This part is good as is. > + linux-kselftest(a)vger.kernel.org The reason I suggested resending cc'ing linux-kselftest is because this fixes a kselftest problem. I am assuming this patch will go through kbuild Acked-by: Shuah Khan <skhan(a)linuxfoundation.org> thanks, -- Shuah

2 years, 10 months

3
2
0 0

[PATCH v11 0/8] cgroup/cpuset: cpu partition code enhancements

by Waiman Long

v11: - Fix incorrect spacing in patch 7 and include documentation suggestions by Michal. - Move partition_is_populated() check to the last one in list of conditions to be checked. v10: - Relax constraints for changes made to "cpuset.cpus" and "cpuset.cpus.partition" as suggested. Now almost all changes are allowed. - Add patch 1 to signal that we may need to do additional work in the future to relax the constraint that tasks' cpumask may need some adjustment if child partitions are present. - Add patch 2 for miscellaneous cleanups. This patchset include the following enhancements to the cpuset v2 partition code. 1) Allow partitions that have no task to have empty effective cpus. 2) Relax the constraints on what changes are allowed in cpuset.cpus and cpuset.cpus.partition. However, the partition remain invalid until the constraints of a valid partition root is satisfied. 3) Add a new "isolated" partition type for partitions with no load balancing which is available in v1 but not yet in v2. 4) Allow the reading of cpuset.cpus.partition to include a reason string as to why the partition remain invalid. In addition, the cgroup-v2.rst documentation file is updated and a self test is added to verify the correctness the partition code. The code diff from v10 is listed below. Waiman Long (8): cgroup/cpuset: Add top_cpuset check in update_tasks_cpumask() cgroup/cpuset: Miscellaneous cleanups & add helper functions cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective cgroup/cpuset: Relax constraints to partition & cpus changes cgroup/cpuset: Add a new isolated cpus.partition type cgroup/cpuset: Show invalid partition reason string cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst kselftest/cgroup: Add cpuset v2 partition root state test Documentation/admin-guide/cgroup-v2.rst | 149 ++-- kernel/cgroup/cpuset.c | 718 +++++++++++------- tools/testing/selftests/cgroup/Makefile | 5 +- .../selftests/cgroup/test_cpuset_prs.sh | 674 ++++++++++++++++ tools/testing/selftests/cgroup/wait_inotify.c | 87 +++ 5 files changed, 1304 insertions(+), 329 deletions(-) create mode 100755 tools/testing/selftests/cgroup/test_cpuset_prs.sh create mode 100644 tools/testing/selftests/cgroup/wait_inotify.c -- diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index 94e1e3771830..9184a09e0fc9 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -2130,10 +2130,10 @@ Cpuset Interface Files CPUs should be carefully distributed and bound to each of the individual CPUs for optimal performance. - The value shown in "cpuset.cpus.effective" of a partition root is - the CPUs that the parent partition root can dedicate to the new - partition root. They are subtracted from "cpuset.cpus.effective" - of the parent and may be different from "cpuset.cpus" + The value shown in "cpuset.cpus.effective" of a partition root + is the CPUs that the partition root can dedicate to a potential + new child partition root. The new child subtracts available + CPUs from its parent "cpuset.cpus.effective". A partition root ("root" or "isolated") can be in one of the two possible states - valid or invalid. An invalid partition @@ -2165,24 +2165,28 @@ Cpuset Interface Files 2) The parent cgroup is a valid partition root. 3) The "cpuset.cpus" is not empty and must contain at least one of the CPUs from parent's "cpuset.cpus", i.e. they overlap. - 4) The "cpuset.cpus.effective" must be a subset of "cpuset.cpus" - and cannot be empty unless there is no task associated with - this partition. + 4) The "cpuset.cpus.effective" must be a subset of "cpuset.cpus" + and cannot be empty unless there is no task associated with + this partition. External events like hotplug or changes to "cpuset.cpus" can cause a valid partition root to become invalid and vice versa. Note that a task cannot be moved to a cgroup with empty "cpuset.cpus.effective". - For a valid partition root or an invalid partition root with - the exclusivity rule enabled, changes made to "cpuset.cpus" - that violate the exclusivity rule will not be allowed. + For a valid partition root or an invalid partition root with + the exclusivity rule enabled, changes made to "cpuset.cpus" + that violate the exclusivity rule will not be allowed. A valid non-root parent partition may distribute out all its CPUs to its child partitions when there is no task associated with it. - Care must be taken to change a valid partition root to "member" - as all its child partitions, if present, will become invalid. + Care must be taken to change a valid partition root to + "member" as all its child partitions, if present, will become + invalid causing disruption to tasks running in those child + partitions. These inactivated partitions could be recovered if + their parent is switched back to a partition root with a proper + set of "cpuset.cpus". Poll and inotify events are triggered whenever the state of "cpuset.cpus.partition" changes. That includes changes caused diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c index 90ee0e4d8d7e..261974f5bb3c 100644 --- a/kernel/cgroup/cpuset.c +++ b/kernel/cgroup/cpuset.c @@ -1283,9 +1283,12 @@ static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs, * invalid to valid violates the exclusivity rule. * * The partcmd_enable and partcmd_disable commands are used by - * update_prstate(). The partcmd_update command is used by - * update_cpumasks_hier() with newmask NULL and update_cpumask() with - * newmask set. + * update_prstate(). An error code may be returned and the caller will check + * for error. + * + * The partcmd_update command is used by update_cpumasks_hier() with newmask + * NULL and update_cpumask() with newmask set. The callers won't check for + * error and so partition_root_state and prs_error will be updated directly. */ static int update_parent_subparts_cpumask(struct cpuset *cs, int cmd, struct cpumask *newmask, @@ -1326,8 +1329,8 @@ static int update_parent_subparts_cpumask(struct cpuset *cs, int cmd, * A parent can be left with no CPU as long as there is no * task directly associated with the parent partition. */ - if (partition_is_populated(parent, cs) && - !cpumask_intersects(cs->cpus_allowed, parent->effective_cpus)) + if (!cpumask_intersects(cs->cpus_allowed, parent->effective_cpus) && + partition_is_populated(parent, cs)) return PERR_NOCPUS; cpumask_copy(tmp->addmask, cs->cpus_allowed); @@ -1361,9 +1364,10 @@ static int update_parent_subparts_cpumask(struct cpuset *cs, int cmd, * Make partition invalid if parent's effective_cpus could * become empty and there are tasks in the parent. */ - if (adding && partition_is_populated(parent, cs) && + if (adding && cpumask_subset(parent->effective_cpus, tmp->addmask) && - !cpumask_intersects(tmp->delmask, cpu_active_mask)) { + !cpumask_intersects(tmp->delmask, cpu_active_mask) && + partition_is_populated(parent, cs)) { part_error = PERR_NOCPUS; adding = false; deleting = cpumask_and(tmp->delmask, cs->cpus_allowed, @@ -1749,13 +1753,13 @@ static int update_cpumask(struct cpuset *cs, struct cpuset *trialcs, /* * Make sure that subparts_cpus, if not empty, is a subset of - * cpus_allowed. Clear subparts_cpus if there is an error or + * cpus_allowed. Clear subparts_cpus if partition not valid or * empty effective cpus with tasks. */ if (cs->nr_subparts_cpus) { - if (cs->prs_err || - (partition_is_populated(cs, NULL) && - cpumask_subset(trialcs->effective_cpus, cs->subparts_cpus))) { + if (!is_partition_valid(cs) || + (cpumask_subset(trialcs->effective_cpus, cs->subparts_cpus) && + partition_is_populated(cs, NULL))) { cs->nr_subparts_cpus = 0; cpumask_clear(cs->subparts_cpus); } else {

2 years, 10 months

5
35
0 0

Re: [PATCH net-next v1 1/1] net: bridge: ensure that link-local traffic cannot unlock a locked port

by Nikolay Aleksandrov

On 30/06/2022 14:16, Hans Schultz wrote: > This patch is related to the patch set > "Add support for locked bridge ports (for 802.1X)" > Link: https://lore.kernel.org/netdev/20220223101650.1212814-1-schultz.hans+netdev… > > This patch makes the locked port feature work with learning turned on, > which is enabled with the command: > > bridge link set dev DEV learning on > > Without this patch, link local traffic (01:80:c2) like EAPOL packets will > create a fdb entry when ingressing on a locked port with learning turned > on, thus unintentionally opening up the port for traffic for the said MAC. > > Some switchcore features like Mac-Auth and refreshing of FDB entries, > require learning enables on some switchcores, f.ex. the mv88e6xxx family. > Other features may apply too. > > Since many switchcores trap or mirror various multicast packets to the > CPU, link local traffic will unintentionally unlock the port for the > SA mac in question unless prevented by this patch. > > Signed-off-by: Hans Schultz <hans(a)kapio-technology.com> > --- > net/bridge/br_input.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c > index 68b3e850bcb9..a3ce0a151817 100644 > --- a/net/bridge/br_input.c > +++ b/net/bridge/br_input.c > @@ -215,6 +215,7 @@ static void __br_handle_local_finish(struct sk_buff *skb) > if ((p->flags & BR_LEARNING) && > nbp_state_should_learn(p) && > !br_opt_get(p->br, BROPT_NO_LL_LEARN) && > + !(p->flags & BR_PORT_LOCKED) && > br_should_learn(p, skb, &vid)) > br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, 0); > } LGTM, thanks! Acked-by: Nikolay Aleksandrov <razor(a)blackwall.org>

2 years, 10 months

1
0
0 0

Re: [PATCH net-next v1 1/1] net: bridge: ensure that multicast packets cannot unlock a locked port

by Nikolay Aleksandrov

On 30/06/2022 13:05, Hans Schultz wrote: > This makes it possible to use the locked port feature with learning > turned on which is needed for various driver features. > > Signed-off-by: Hans Schultz <hans(a)kapio-technology.com> > --- > net/bridge/br_input.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c > index 68b3e850bcb9..a3ce0a151817 100644 > --- a/net/bridge/br_input.c > +++ b/net/bridge/br_input.c > @@ -215,6 +215,7 @@ static void __br_handle_local_finish(struct sk_buff *skb) > if ((p->flags & BR_LEARNING) && > nbp_state_should_learn(p) && > !br_opt_get(p->br, BROPT_NO_LL_LEARN) && > + !(p->flags & BR_PORT_LOCKED) && > br_should_learn(p, skb, &vid)) > br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, 0); > } hmm this is called for link-local traffic (01:80:c2), the title is misleading please include the real traffic type because it doesn't concern mcast Also please include the long explanation from the 0 patch in this one and drop the cover letter, it's good to have the info. Thanks, Nik

2 years, 10 months

1
0
0 0

[PATCH] selftests net: fix kselftest net fatal error

by Coleman Dietsch

The incorrect path is causing the following error when trying to run net kselftests: In file included from bpf/nat6to4.c:43: ../../../lib/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found ^~~~~~~~~~~~~~~~~~~ 1 error generated. Signed-off-by: Coleman Dietsch <dietschc(a)csp.edu> --- tools/testing/selftests/net/bpf/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/bpf/Makefile b/tools/testing/selftests/net/bpf/Makefile index 8a69c91fcca0..8ccaf8732eb2 100644 --- a/tools/testing/selftests/net/bpf/Makefile +++ b/tools/testing/selftests/net/bpf/Makefile @@ -2,7 +2,7 @@ CLANG ?= clang CCINCLUDE += -I../../bpf -CCINCLUDE += -I../../../lib +CCINCLUDE += -I../../../../lib CCINCLUDE += -I../../../../../usr/include/ TEST_CUSTOM_PROGS = $(OUTPUT)/bpf/nat6to4.o -- 2.34.1

2 years, 10 months

2
1
0 0

[PATCH] tools: Strong conversion of void type pointer could be removed

by Li kunyu

The void pointer argument does not require a cast assignment because it is the address passed. Signed-off-by: Li kunyu <kunyu(a)nfschina.com> --- tools/testing/selftests/x86/fsgsbase.c | 2 +- tools/testing/selftests/x86/test_vsyscall.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/x86/fsgsbase.c b/tools/testing/selftests/x86/fsgsbase.c index 8c780cce941d..5d99261317e1 100644 --- a/tools/testing/selftests/x86/fsgsbase.c +++ b/tools/testing/selftests/x86/fsgsbase.c @@ -63,7 +63,7 @@ static void clearhandler(int sig) static void sigsegv(int sig, siginfo_t *si, void *ctx_void) { - ucontext_t *ctx = (ucontext_t*)ctx_void; + ucontext_t *ctx = ctx_void; if (!want_segv) { clearhandler(SIGSEGV); diff --git a/tools/testing/selftests/x86/test_vsyscall.c b/tools/testing/selftests/x86/test_vsyscall.c index 5b45e6986aea..2416941a0952 100644 --- a/tools/testing/selftests/x86/test_vsyscall.c +++ b/tools/testing/selftests/x86/test_vsyscall.c @@ -184,7 +184,7 @@ static volatile unsigned long segv_err; static void sigsegv(int sig, siginfo_t *info, void *ctx_void) { - ucontext_t *ctx = (ucontext_t *)ctx_void; + ucontext_t *ctx = ctx_void; segv_err = ctx->uc_mcontext.gregs[REG_ERR]; siglongjmp(jmpbuf, 1); -- 2.18.2

2 years, 10 months

2
3
0 0

[PATCH net 2/2] selftest: tun: add test for NAPI dismantle

by Jakub Kicinski

Being lazy does not pay, add the test for various ordering of tun queue close / detach / destroy. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/Makefile | 2 +- tools/testing/selftests/net/tun.c | 162 +++++++++++++++++++++++++++ 2 files changed, 163 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/net/tun.c diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 7ea54af55490..ddad703ace34 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -54,7 +54,7 @@ TEST_GEN_FILES += ipsec TEST_GEN_FILES += ioam6_parser TEST_GEN_FILES += gro TEST_GEN_PROGS = reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa -TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls +TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls tun TEST_GEN_FILES += toeplitz TEST_GEN_FILES += cmsg_sender TEST_GEN_FILES += stress_reuseport_listen diff --git a/tools/testing/selftests/net/tun.c b/tools/testing/selftests/net/tun.c new file mode 100644 index 000000000000..fa83918b62d1 --- /dev/null +++ b/tools/testing/selftests/net/tun.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0 + +#define _GNU_SOURCE + +#include <errno.h> +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <linux/if.h> +#include <linux/if_tun.h> +#include <linux/netlink.h> +#include <linux/rtnetlink.h> +#include <sys/ioctl.h> +#include <sys/socket.h> + +#include "../kselftest_harness.h" + +static int tun_attach(int fd, char *dev) +{ + struct ifreq ifr; + + memset(&ifr, 0, sizeof(ifr)); + strcpy(ifr.ifr_name, dev); + ifr.ifr_flags = IFF_ATTACH_QUEUE; + + return ioctl(fd, TUNSETQUEUE, (void *) &ifr); +} + +static int tun_detach(int fd, char *dev) +{ + struct ifreq ifr; + + memset(&ifr, 0, sizeof(ifr)); + strcpy(ifr.ifr_name, dev); + ifr.ifr_flags = IFF_DETACH_QUEUE; + + return ioctl(fd, TUNSETQUEUE, (void *) &ifr); +} + +static int tun_alloc(char *dev) +{ + struct ifreq ifr; + int fd, err; + + fd = open("/dev/net/tun", O_RDWR); + if (fd < 0) { + fprintf(stderr, "can't open tun: %s\n", strerror(errno)); + return fd; + } + + memset(&ifr, 0, sizeof(ifr)); + strcpy(ifr.ifr_name, dev); + ifr.ifr_flags = IFF_TAP | IFF_NAPI | IFF_MULTI_QUEUE; + + err = ioctl(fd, TUNSETIFF, (void *) &ifr); + if (err < 0) { + fprintf(stderr, "can't TUNSETIFF: %s\n", strerror(errno)); + close(fd); + return err; + } + strcpy(dev, ifr.ifr_name); + return fd; +} + +static int tun_delete(char *dev) +{ + struct { + struct nlmsghdr nh; + struct ifinfomsg ifm; + unsigned char data[64]; + } req; + struct rtattr *rta; + int ret, rtnl; + + rtnl = socket(AF_NETLINK, SOCK_DGRAM, NETLINK_ROUTE); + if (rtnl < 0) { + fprintf(stderr, "can't open rtnl: %s\n", strerror(errno)); + return 1; + } + + memset(&req, 0, sizeof(req)); + req.nh.nlmsg_len = NLMSG_ALIGN(NLMSG_LENGTH(sizeof(req.ifm))); + req.nh.nlmsg_flags = NLM_F_REQUEST; + req.nh.nlmsg_type = RTM_DELLINK; + + req.ifm.ifi_family = AF_UNSPEC; + + rta = (struct rtattr *)(((char *)&req) + NLMSG_ALIGN(req.nh.nlmsg_len)); + rta->rta_type = IFLA_IFNAME; + rta->rta_len = RTA_LENGTH(IFNAMSIZ); + req.nh.nlmsg_len += rta->rta_len; + memcpy(RTA_DATA(rta), dev, IFNAMSIZ); + + ret = send(rtnl, &req, req.nh.nlmsg_len, 0); + if (ret < 0) + fprintf(stderr, "can't send: %s\n", strerror(errno)); + ret = (unsigned int)ret != req.nh.nlmsg_len; + + close(rtnl); + return ret; +} + +FIXTURE(tun) +{ + char ifname[IFNAMSIZ]; + int fd, fd2; +}; + +FIXTURE_SETUP(tun) +{ + memset(self->ifname, 0, sizeof(self->ifname)); + + self->fd = tun_alloc(self->ifname); + ASSERT_GE(self->fd, 0); + + self->fd2 = tun_alloc(self->ifname); + ASSERT_GE(self->fd2, 0); +} + +FIXTURE_TEARDOWN(tun) +{ + if (self->fd >= 0) + close(self->fd); + if (self->fd2 >= 0) + close(self->fd2); +} + +TEST_F(tun, delete_detach_close) { + EXPECT_EQ(tun_delete(self->ifname), 0); + EXPECT_EQ(tun_detach(self->fd, self->ifname), -1); + EXPECT_EQ(errno, 22); +} + +TEST_F(tun, detach_delete_close) { + EXPECT_EQ(tun_detach(self->fd, self->ifname), 0); + EXPECT_EQ(tun_delete(self->ifname), 0); +} + +TEST_F(tun, detach_close_delete) { + EXPECT_EQ(tun_detach(self->fd, self->ifname), 0); + close(self->fd); + self->fd = -1; + EXPECT_EQ(tun_delete(self->ifname), 0); +} + +TEST_F(tun, reattach_delete_close) { + EXPECT_EQ(tun_detach(self->fd, self->ifname), 0); + EXPECT_EQ(tun_attach(self->fd, self->ifname), 0); + EXPECT_EQ(tun_delete(self->ifname), 0); +} + +TEST_F(tun, reattach_close_delete) { + EXPECT_EQ(tun_detach(self->fd, self->ifname), 0); + EXPECT_EQ(tun_attach(self->fd, self->ifname), 0); + close(self->fd); + self->fd = -1; + EXPECT_EQ(tun_delete(self->ifname), 0); +} + +TEST_HARNESS_MAIN -- 2.36.1

2 years, 10 months

1
0
0 0

[PATCH net-next] selftests: forwarding: ethtool_extended_state: Convert to busywait

by Petr Machata

Currently, this script sets up the test scenario, which is supposed to end in an inability of the system to negotiate a link. It then waits for a bit, and verifies that the system can diagnose why the link was not established. The wait time for the scenario where different link speeds are forced on the two ends of a loopback cable, was set to 4 seconds, which exactly covered it. As of a recent mlxsw firmware update, this time gets longer, and this test starts failing. The time that selftests currently wait for links to be established is currently $WAIT_TIMEOUT, or 20 seconds. It seems reasonable that if this is the time necessary to establish and bring up a link, it should also be enough to determine that a link cannot be established and why. Therefore in this patch, convert the sleeps to busywaits, so that if a failure is established sooner (as is expected), the test runs quicker. And use $WAIT_TIMEOUT as the time to wait. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Amit Cohen <amcohen(a)nvidia.com> --- .../net/forwarding/ethtool_extended_state.sh | 43 ++++++++++++------- 1 file changed, 28 insertions(+), 15 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh b/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh index 4b42dfd4efd1..072faa77f53b 100755 --- a/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh +++ b/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh @@ -11,6 +11,8 @@ NUM_NETIFS=2 source lib.sh source ethtool_lib.sh +TIMEOUT=$((WAIT_TIMEOUT * 1000)) # ms + setup_prepare() { swp1=${NETIFS[p1]} @@ -18,7 +20,7 @@ setup_prepare() swp3=$NETIF_NO_CABLE } -ethtool_extended_state_check() +ethtool_ext_state() { local dev=$1; shift local expected_ext_state=$1; shift @@ -30,21 +32,27 @@ ethtool_extended_state_check() | sed -e 's/^[[:space:]]*//') ext_state=$(echo $ext_state | cut -d "," -f1) - [[ $ext_state == $expected_ext_state ]] - check_err $? "Expected \"$expected_ext_state\", got \"$ext_state\"" - - [[ $ext_substate == $expected_ext_substate ]] - check_err $? "Expected \"$expected_ext_substate\", got \"$ext_substate\"" + if [[ $ext_state != $expected_ext_state ]]; then + echo "Expected \"$expected_ext_state\", got \"$ext_state\"" + return 1 + fi + if [[ $ext_substate != $expected_ext_substate ]]; then + echo "Expected \"$expected_ext_substate\", got \"$ext_substate\"" + return 1 + fi } autoneg() { + local msg + RET=0 ip link set dev $swp1 up - sleep 4 - ethtool_extended_state_check $swp1 "Autoneg" "No partner detected" + msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \ + "Autoneg" "No partner detected") + check_err $? "$msg" log_test "Autoneg, No partner detected" @@ -53,6 +61,8 @@ autoneg() autoneg_force_mode() { + local msg + RET=0 ip link set dev $swp1 up @@ -65,12 +75,13 @@ autoneg_force_mode() ethtool_set $swp1 speed $speed1 autoneg off ethtool_set $swp2 speed $speed2 autoneg off - sleep 4 - ethtool_extended_state_check $swp1 "Autoneg" \ - "No partner detected during force mode" + msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \ + "Autoneg" "No partner detected during force mode") + check_err $? "$msg" - ethtool_extended_state_check $swp2 "Autoneg" \ - "No partner detected during force mode" + msg=$(busywait $TIMEOUT ethtool_ext_state $swp2 \ + "Autoneg" "No partner detected during force mode") + check_err $? "$msg" log_test "Autoneg, No partner detected during force mode" @@ -83,12 +94,14 @@ autoneg_force_mode() no_cable() { + local msg + RET=0 ip link set dev $swp3 up - sleep 1 - ethtool_extended_state_check $swp3 "No cable" + msg=$(busywait $TIMEOUT ethtool_ext_state $swp3 "No cable") + check_err $? "$msg" log_test "No cable" -- 2.35.3

2 years, 10 months

2
1
0 0

[net-next v3 0/4] seg6: add support for SRv6 Headend Reduced Encapsulation

by Andrea Mayer

This patchset adds support for SRv6 Headend behavior with Reduced Encapsulation. It introduces the H.Encaps.Red and H.L2Encaps.Red versions of the SRv6 H.Encaps and H.L2Encaps behaviors, according to RFC 8986 [1]. In details, the patchset is made of: - patch 1/4: add support for SRv6 H.Encaps.Red behavior; - Patch 2/4: add support for SRv6 H.L2Encaps.Red behavior; - patch 2/4: add selftest for SRv6 H.Encaps.Red behavior; - patch 3/4: add selftest for SRv6 H.L2Encaps.Red behavior. The corresponding iproute2 patch for supporting SRv6 H.Encaps.Red and H.L2Encaps.Red behaviors is provided in a separated patchset. [1] - https://datatracker.ietf.org/doc/html/rfc8986 v2 -> v3: - Keep SRH when HMAC TLV is present; - Split the support for H.Encaps.Red and H.L2Encaps.Red behaviors in two patches (respectively, patch 1/4 and patch 2/4); - Add selftests for SRv6 H.Encaps.Red and H.L2Encaps.Red. v1 -> v2: - Fixed sparse warnings; - memset now uses sizeof() instead of hardcoded value; - Removed EXPORT_SYMBOL_GPL. Andrea Mayer (4): seg6: add support for SRv6 H.Encaps.Red behavior seg6: add support for SRv6 H.L2Encaps.Red behavior selftests: seg6: add selftest for SRv6 H.Encaps.Red behavior selftests: seg6: add selftest for SRv6 H.L2Encaps.Red behavior include/uapi/linux/seg6_iptunnel.h | 2 + net/ipv6/seg6_iptunnel.c | 138 +++- .../net/srv6_hencap_red_l3vpn_test.sh | 742 ++++++++++++++++++ .../net/srv6_hl2encap_red_l2vpn_test.sh | 674 ++++++++++++++++ 4 files changed, 1554 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/net/srv6_hencap_red_l3vpn_test.sh create mode 100755 tools/testing/selftests/net/srv6_hl2encap_red_l2vpn_test.sh -- 2.20.1

2 years, 10 months

2
6
0 0

[PATCH v2] selftests/tpm2: increase timeout for kselftests

by Stefan Mahnke-Hartmann

From: Johannes Holland <johannes.holland(a)infineon.com> Due to CreatePrimary commands which need to create RSA keys of increasing size, the timeout value need to be raised, as well. Default is 45s. Signed-off-by: Johannes Holland <johannes.holland(a)infineon.com> Signed-off-by: Stefan Mahnke-Hartmann <stefan.mahnke-hartmann(a)infineon.com> --- Changelog: * v2: * Add maintainter to recipients * Change subject tools/testing/selftests/tpm2/settings | 2 ++ 1 file changed, 2 insertions(+) create mode 100644 tools/testing/selftests/tpm2/settings diff --git a/tools/testing/selftests/tpm2/settings b/tools/testing/selftests/tpm2/settings new file mode 100644 index 000000000000..919bc3803f03 --- /dev/null +++ b/tools/testing/selftests/tpm2/settings @@ -0,0 +1,2 @@ +timeout=600 + -- 2.25.1

2 years, 10 months

2
1
0 0

kselftest/next build: 5 builds: 0 failed, 5 passed (v5.19-rc4-6-g8587f3732b37)

by kernelci.org bot

kselftest/next build: 5 builds: 0 failed, 5 passed (v5.19-rc4-6-g8587f3732b37) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v5.19-rc4-6-g8587f3… Tree: kselftest Branch: next Git Describe: v5.19-rc4-6-g8587f3732b37 Git Commit: 8587f3732b37a39de205d8c42f5448dbe6aa6b55 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 3 unique architectures ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

2 years, 10 months

1
0
0 0

[PATCH MANUALSEL 5.4] selftests: KVM: Handle compiler optimizations in ucall

by Sasha Levin

From: Raghavendra Rao Ananta <rananta(a)google.com> [ Upstream commit 9e2f6498efbbc880d7caa7935839e682b64fe5a6 ] The selftests, when built with newer versions of clang, is found to have over optimized guests' ucall() function, and eliminating the stores for uc.cmd (perhaps due to no immediate readers). This resulted in the userspace side always reading a value of '0', and causing multiple test failures. As a result, prevent the compiler from optimizing the stores in ucall() with WRITE_ONCE(). Suggested-by: Ricardo Koller <ricarkol(a)google.com> Suggested-by: Reiji Watanabe <reijiw(a)google.com> Signed-off-by: Raghavendra Rao Ananta <rananta(a)google.com> Message-Id: <20220615185706.1099208-1-rananta(a)google.com> Reviewed-by: Andrew Jones <drjones(a)redhat.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/kvm/lib/aarch64/ucall.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/kvm/lib/aarch64/ucall.c b/tools/testing/selftests/kvm/lib/aarch64/ucall.c index 6cd91970fbad..3b2a426070c4 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/ucall.c +++ b/tools/testing/selftests/kvm/lib/aarch64/ucall.c @@ -73,20 +73,19 @@ void ucall_uninit(struct kvm_vm *vm) void ucall(uint64_t cmd, int nargs, ...) { - struct ucall uc = { - .cmd = cmd, - }; + struct ucall uc = {}; va_list va; int i; + WRITE_ONCE(uc.cmd, cmd); nargs = nargs <= UCALL_MAX_ARGS ? nargs : UCALL_MAX_ARGS; va_start(va, nargs); for (i = 0; i < nargs; ++i) - uc.args[i] = va_arg(va, uint64_t); + WRITE_ONCE(uc.args[i], va_arg(va, uint64_t)); va_end(va); - *ucall_exit_mmio_addr = (vm_vaddr_t)&uc; + WRITE_ONCE(*ucall_exit_mmio_addr, (vm_vaddr_t)&uc); } uint64_t get_ucall(struct kvm_vm *vm, uint32_t vcpu_id, struct ucall *uc) -- 2.35.1

2 years, 10 months

1
0
0 0

[PATCH MANUALSEL 5.10 2/2] selftests: KVM: Handle compiler optimizations in ucall

by Sasha Levin

From: Raghavendra Rao Ananta <rananta(a)google.com> [ Upstream commit 9e2f6498efbbc880d7caa7935839e682b64fe5a6 ] The selftests, when built with newer versions of clang, is found to have over optimized guests' ucall() function, and eliminating the stores for uc.cmd (perhaps due to no immediate readers). This resulted in the userspace side always reading a value of '0', and causing multiple test failures. As a result, prevent the compiler from optimizing the stores in ucall() with WRITE_ONCE(). Suggested-by: Ricardo Koller <ricarkol(a)google.com> Suggested-by: Reiji Watanabe <reijiw(a)google.com> Signed-off-by: Raghavendra Rao Ananta <rananta(a)google.com> Message-Id: <20220615185706.1099208-1-rananta(a)google.com> Reviewed-by: Andrew Jones <drjones(a)redhat.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/kvm/lib/aarch64/ucall.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/kvm/lib/aarch64/ucall.c b/tools/testing/selftests/kvm/lib/aarch64/ucall.c index 2f37b90ee1a9..f600311fdc6a 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/ucall.c +++ b/tools/testing/selftests/kvm/lib/aarch64/ucall.c @@ -73,20 +73,19 @@ void ucall_uninit(struct kvm_vm *vm) void ucall(uint64_t cmd, int nargs, ...) { - struct ucall uc = { - .cmd = cmd, - }; + struct ucall uc = {}; va_list va; int i; + WRITE_ONCE(uc.cmd, cmd); nargs = nargs <= UCALL_MAX_ARGS ? nargs : UCALL_MAX_ARGS; va_start(va, nargs); for (i = 0; i < nargs; ++i) - uc.args[i] = va_arg(va, uint64_t); + WRITE_ONCE(uc.args[i], va_arg(va, uint64_t)); va_end(va); - *ucall_exit_mmio_addr = (vm_vaddr_t)&uc; + WRITE_ONCE(*ucall_exit_mmio_addr, (vm_vaddr_t)&uc); } uint64_t get_ucall(struct kvm_vm *vm, uint32_t vcpu_id, struct ucall *uc) -- 2.35.1

2 years, 10 months

1
0
0 0

[PATCH MANUALSEL 5.15 2/3] selftests: KVM: Handle compiler optimizations in ucall

by Sasha Levin

From: Raghavendra Rao Ananta <rananta(a)google.com> [ Upstream commit 9e2f6498efbbc880d7caa7935839e682b64fe5a6 ] The selftests, when built with newer versions of clang, is found to have over optimized guests' ucall() function, and eliminating the stores for uc.cmd (perhaps due to no immediate readers). This resulted in the userspace side always reading a value of '0', and causing multiple test failures. As a result, prevent the compiler from optimizing the stores in ucall() with WRITE_ONCE(). Suggested-by: Ricardo Koller <ricarkol(a)google.com> Suggested-by: Reiji Watanabe <reijiw(a)google.com> Signed-off-by: Raghavendra Rao Ananta <rananta(a)google.com> Message-Id: <20220615185706.1099208-1-rananta(a)google.com> Reviewed-by: Andrew Jones <drjones(a)redhat.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/kvm/lib/aarch64/ucall.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/kvm/lib/aarch64/ucall.c b/tools/testing/selftests/kvm/lib/aarch64/ucall.c index e0b0164e9af8..be1d9728c4ce 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/ucall.c +++ b/tools/testing/selftests/kvm/lib/aarch64/ucall.c @@ -73,20 +73,19 @@ void ucall_uninit(struct kvm_vm *vm) void ucall(uint64_t cmd, int nargs, ...) { - struct ucall uc = { - .cmd = cmd, - }; + struct ucall uc = {}; va_list va; int i; + WRITE_ONCE(uc.cmd, cmd); nargs = nargs <= UCALL_MAX_ARGS ? nargs : UCALL_MAX_ARGS; va_start(va, nargs); for (i = 0; i < nargs; ++i) - uc.args[i] = va_arg(va, uint64_t); + WRITE_ONCE(uc.args[i], va_arg(va, uint64_t)); va_end(va); - *ucall_exit_mmio_addr = (vm_vaddr_t)&uc; + WRITE_ONCE(*ucall_exit_mmio_addr, (vm_vaddr_t)&uc); } uint64_t get_ucall(struct kvm_vm *vm, uint32_t vcpu_id, struct ucall *uc) -- 2.35.1

2 years, 10 months

1
0
0 0

[PATCH MANUALSEL 5.18 2/3] selftests: KVM: Handle compiler optimizations in ucall

by Sasha Levin

From: Raghavendra Rao Ananta <rananta(a)google.com> [ Upstream commit 9e2f6498efbbc880d7caa7935839e682b64fe5a6 ] The selftests, when built with newer versions of clang, is found to have over optimized guests' ucall() function, and eliminating the stores for uc.cmd (perhaps due to no immediate readers). This resulted in the userspace side always reading a value of '0', and causing multiple test failures. As a result, prevent the compiler from optimizing the stores in ucall() with WRITE_ONCE(). Suggested-by: Ricardo Koller <ricarkol(a)google.com> Suggested-by: Reiji Watanabe <reijiw(a)google.com> Signed-off-by: Raghavendra Rao Ananta <rananta(a)google.com> Message-Id: <20220615185706.1099208-1-rananta(a)google.com> Reviewed-by: Andrew Jones <drjones(a)redhat.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/kvm/lib/aarch64/ucall.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/kvm/lib/aarch64/ucall.c b/tools/testing/selftests/kvm/lib/aarch64/ucall.c index e0b0164e9af8..be1d9728c4ce 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/ucall.c +++ b/tools/testing/selftests/kvm/lib/aarch64/ucall.c @@ -73,20 +73,19 @@ void ucall_uninit(struct kvm_vm *vm) void ucall(uint64_t cmd, int nargs, ...) { - struct ucall uc = { - .cmd = cmd, - }; + struct ucall uc = {}; va_list va; int i; + WRITE_ONCE(uc.cmd, cmd); nargs = nargs <= UCALL_MAX_ARGS ? nargs : UCALL_MAX_ARGS; va_start(va, nargs); for (i = 0; i < nargs; ++i) - uc.args[i] = va_arg(va, uint64_t); + WRITE_ONCE(uc.args[i], va_arg(va, uint64_t)); va_end(va); - *ucall_exit_mmio_addr = (vm_vaddr_t)&uc; + WRITE_ONCE(*ucall_exit_mmio_addr, (vm_vaddr_t)&uc); } uint64_t get_ucall(struct kvm_vm *vm, uint32_t vcpu_id, struct ucall *uc) -- 2.35.1

2 years, 10 months

1
0
0 0

[PATCH v14 3/4] selftests/ftrace: Add testcases for objtrace

by Jeff Xie

Add a series of testcases to illustrate correct and incorrect usage of objtrace trigger. Cc: Shuah Khan <shuah(a)kernel.org> Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Jeff Xie <xiehuan09(a)gmail.com> Tested-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> --- .../ftrace/test.d/trigger/trigger-objtrace.tc | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc new file mode 100644 index 000000000000..d894442b6a30 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc @@ -0,0 +1,41 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: event trigger - test objtrace-trigger +# requires: kprobe_events "objtrace":README + +fail() { #msg + echo $1 + exit_fail +} + +echo 'p bio_add_page arg1=$arg1 arg2=$arg2' > kprobe_events + +FEATURE=`grep objtrace events/kprobes/p_bio_add_page_0/trigger` +if [ -z "$FEATURE" ]; then + echo "objtrace trigger is not supported" + exit_unsupported +fi + +echo "Test objtrace trigger" +echo 'objtrace:add:arg1,0x28:u32:1 if comm == "cat"' > \ + events/kprobes/p_bio_add_page_0/trigger +if [ -z $? ]; then + fail "objtrace trigger syntax error" +fi + +echo "Test objtrace semantic errors" + +# Being lack of objtrace command +! echo 'objtrace:arg1,0x28:u32:1' > events/kprobes/p_bio_add_page_0/trigger +# Bad parameter name +! echo 'objtrace:add:argx:u32:1' > events/kprobes/p_bio_add_page_0/trigger +# The parameter existed on event +! echo 'objtrace:add:arg2:u32:1' > events/kprobes/p_bio_add_page_0/trigger + +echo "reset objtrace trigger" + +echo '!objtrace:add:arg1,0x28:u32' > \ + events/kprobes/p_bio_add_page_0/trigger +echo '-:p_bio_add_page_0' >> ./kprobe_events + +exit 0 -- 2.25.1

2 years, 10 months

1
0
0 0

[PATCH] Documentation: kunit: eliminate code-block warnings

by Randy Dunlap

Fix Sphinx complaints about code-block directive missing an argument. For start.rst, add "none" since that is already heavily used in that file. For run_wrapper.rst, use the simpler "::" literal block instead. dev-tools/kunit/start.rst:83: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:17: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:23: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:31: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:51: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:57: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:78: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:85: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:109: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:116: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:124: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:139: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:162: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. Fixes: c48b9ef1f794 ("Documentation: KUnit: Rewrite getting started") Fixes: 46201d47d6c4 ("Documentation: kunit: Reorganize documentation related to running tests") Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Brendan Higgins <brendanhiggins(a)google.com> Cc: linux-kselftest(a)vger.kernel.org Cc: kunit-dev(a)googlegroups.com Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: linux-doc(a)vger.kernel.org Cc: Harinder Singh <sharinder(a)google.com> Cc: Tim Bird <tim.bird(a)sony.com> --- Documentation/dev-tools/kunit/run_wrapper.rst | 24 ++++++++-------- Documentation/dev-tools/kunit/start.rst | 2 - 2 files changed, 13 insertions(+), 13 deletions(-) --- linux-next-20220331.orig/Documentation/dev-tools/kunit/run_wrapper.rst +++ linux-next-20220331/Documentation/dev-tools/kunit/run_wrapper.rst @@ -14,13 +14,13 @@ tests, and formats the test results. Run command: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run We should see the following: -.. code-block:: +:: Generating .config... Building KUnit kernel... @@ -28,7 +28,7 @@ We should see the following: We may want to use the following options: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all @@ -48,13 +48,13 @@ test configs for certain subsystems. To use a different ``.kunitconfig`` file (such as one provided to test a particular subsystem), pass it as an option: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4/.kunitconfig To view kunit_tool flags (optional command-line arguments), run: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run --help @@ -75,14 +75,14 @@ certain code blocks, arch configs and so To create a ``.kunitconfig``, using the KUnit ``defconfig``: -.. code-block:: +:: cd $PATH_TO_LINUX_REPO cp tools/testing/kunit/configs/default.config .kunit/.kunitconfig We can then add any other Kconfig options. For example: -.. code-block:: +:: CONFIG_LIST_KUNIT_TEST=y @@ -106,14 +106,14 @@ can run part of the KUnit build process When running kunit_tool, from a ``.kunitconfig``, we can generate a ``.config`` by using the ``config`` argument: -.. code-block:: +:: ./tools/testing/kunit/kunit.py config To build a KUnit kernel from the current ``.config``, we can use the ``build`` argument: -.. code-block:: +:: ./tools/testing/kunit/kunit.py build @@ -121,7 +121,7 @@ If we already have built UML kernel with can run the kernel, and display the test results with the ``exec`` argument: -.. code-block:: +:: ./tools/testing/kunit/kunit.py exec @@ -136,7 +136,7 @@ format. When running tests, kunit_tool p a summary. To see the raw test results in TAP format, we can pass the ``--raw_output`` argument: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run --raw_output @@ -159,7 +159,7 @@ By passing a bash style glob filter to t commands, we can run a subset of the tests built into a kernel . For example: if we only want to run KUnit resource tests, use: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run 'kunit-resource*' --- linux-next-20220331.orig/Documentation/dev-tools/kunit/start.rst +++ linux-next-20220331/Documentation/dev-tools/kunit/start.rst @@ -80,7 +80,7 @@ Running Tests (KUnit Wrapper) If everything worked correctly, you should see the following: -.. code-block:: +.. code-block:: none Generating .config ... Building KUnit Kernel ...

2 years, 10 months

4
7
0 0

THIS IS VERY CONFIDENTIAL

by Steve Dibenedetto

Hello, My name is Steve Dibenedetto. I apologize to have contacted you this way without a direct relationship. There is an opportunity to collaborate with me in the sourcing of some materials needed by our company for production of the different medicines we are researching. I'm aware that this might be totally outside your professional specialization, but it will be a great source for generating extra revenue. I discovered a manufacturer who can supply us at a lower rate than our company's previous purchases. I will give you more specific details when/if I receive feedback from you showing interest. Warm Regards Steve Dibenedetto Production & Control Manager, Green Field Laboratories Gothic House, Barker Gate, Nottingham, NG1 1JU, United Kingdom.

2 years, 10 months

1
0
0 0

Prawne zabezpieczenie firmy

by Maciej Kielar

Dzień dobry, czy są Państwo otwarci na rozmowe o współpracy z nasza Kancelarią? Obsługujemy firmy z województwa pomorskiego w zakresie kompleksowego wsparcia prawnego w rozszerzonym zakresie. Dzięki wieloletniej praktyce i współpracy z działalnościami Państwa formatu jestem w stanie wypracować korzystne rozwiązania pod względem podatkowym i organizacyjnym. Możemy się spotkać bądź porozmawiać telefonicznie? Pozdrawiam, Mec. Maciej Kielar

2 years, 10 months

1
0
0 0

[PATCH] selftests/drivers/gpu: Add error messages to drm_mm.sh

by Gautam Menghani

Add error messages when the module test-drm_mm is not found or could not be removed to make tests output more readable. Signed-off-by: Gautam Menghani <gautammenghani201(a)gmail.com> --- tools/testing/selftests/drivers/gpu/drm_mm.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/drivers/gpu/drm_mm.sh b/tools/testing/selftests/drivers/gpu/drm_mm.sh index b789dc8257e6..09c76cd7661d 100755 --- a/tools/testing/selftests/drivers/gpu/drm_mm.sh +++ b/tools/testing/selftests/drivers/gpu/drm_mm.sh @@ -3,7 +3,7 @@ # Runs API tests for struct drm_mm (DRM range manager) if ! /sbin/modprobe -n -q test-drm_mm; then - echo "drivers/gpu/drm_mm: [skip]" + echo "drivers/gpu/drm_mm: module test-drm_mm is not found in /lib/modules/`uname -r` [skip]" exit 77 fi @@ -11,6 +11,6 @@ if /sbin/modprobe -q test-drm_mm; then /sbin/modprobe -q -r test-drm_mm echo "drivers/gpu/drm_mm: ok" else - echo "drivers/gpu/drm_mm: [FAIL]" + echo "drivers/gpu/drm_mm: module test-drm_mm could not be removed [FAIL]" exit 1 fi -- 2.36.1

2 years, 10 months

1
0
0 0

[PATCH bpf-next v2] selftests/bpf: Use bpf_tcp_helpers.h together with vmlinux.h

by Jörn-Thorben Hinz

Hello there, sending a v2 to follow changes now available in master. Should have delayed the first submission. I’m looking for and am happy about feedback with this patch. It enables the usage of bpf_tcp_helpers.h together with vmlinux.h, as briefly discussed here[1]. This makes bpf_tcp_helpers.h reusable for other or external CC implementations that want to use vmlinux.h. After the merge of 6dc7a0baf1a7 ("selftests/bpf: Fix rare segfault in sock_fields prog test"), the below should be observable in the CI: There is currently one failing prog test with this patch: sock_fields. After including vmlinux.h there (for struct tcp_sock), it fails on skeleton-load when verifying egress_read_sock_fields(), around the call of is_loopback6(): ; return !a6[0] && !a6[1] && !a6[2] && a6[3] == bpf_htonl(1); 22: (56) if w2 != 0x0 goto pc-6 ; R2_w=P0 23: (b7) r3 = 28 ; R3_w=P28 24: (bf) r2 = r1 ; R1_w=sock_common(off=0,imm=0) R2_w=sock_common(off=0,imm=0) 25: (0f) r2 += r3 R2 pointer arithmetic on sock_common prohibited Was able to observe this with Clang 13, 14 and trunk/15 (ff5301dde981) and kernel/bpf-next at d4609a5d8c70 so far. The instructions generated for (the inlined call of) is_loopback6() are actually different here after switching to vmlinux.h. I’m still unsure why this is happening. [1] https://lore.kernel.org/bpf/20220614104452.3370148-4-jthinz@mailbox.tu-berl… Patch description: Remove type declarations from bpf_tcp_helpers.h. Modify files using this header accordingly and provide defines that where previously available from the UAPI headers. Also, include bpf_tracing.h or bpf_tracing_net.h instead of bpf_tcp_helpers.h where those are more appropriate. bpf_tcp_helpers.h moves to progs/, the same place as other headers to be included by BPF programs but not by userspace programs. v2: - Rebase on master for recently merged 6e945d57cc9f, 0735627d78ca, and 6dc7a0baf1a7 - Use bpf_tcp_helpers.h + vmlinux.h in recently added tcp_ca_* tests - Avoid redefinition of struct dctcp when it's compiled in Signed-off-by: Jörn-Thorben Hinz <jthinz(a)mailbox.tu-berlin.de> --- tools/testing/selftests/bpf/bpf_tcp_helpers.h | 241 ------------------ tools/testing/selftests/bpf/progs/bpf_cubic.c | 9 +- tools/testing/selftests/bpf/progs/bpf_dctcp.c | 10 +- .../selftests/bpf/progs/bpf_dctcp_release.c | 9 +- .../selftests/bpf/progs/bpf_tc_helpers.h | 7 + .../selftests/bpf/progs/bpf_tcp_helpers.h | 85 ++++++ .../selftests/bpf/progs/bpf_tcp_nogpl.c | 5 +- .../selftests/bpf/progs/bpf_tracing_net.h | 8 + .../bpf/progs/kfunc_call_test_subprog.c | 5 +- .../testing/selftests/bpf/progs/mptcp_sock.c | 7 +- .../selftests/bpf/progs/sockopt_qos_to_cc.c | 7 +- .../bpf/progs/tcp_ca_incompl_cong_ops.c | 7 +- .../bpf/progs/tcp_ca_write_sk_pacing.c | 9 +- .../bpf/progs/test_btf_skc_cls_ingress.c | 14 +- .../selftests/bpf/progs/test_sock_fields.c | 6 +- .../selftests/bpf/progs/test_tcpbpf_kern.c | 23 +- tools/testing/selftests/bpf/progs/timer.c | 2 +- tools/testing/selftests/bpf/progs/timer_mim.c | 2 +- .../selftests/bpf/progs/timer_mim_reject.c | 2 +- 19 files changed, 143 insertions(+), 315 deletions(-) delete mode 100644 tools/testing/selftests/bpf/bpf_tcp_helpers.h create mode 100644 tools/testing/selftests/bpf/progs/bpf_tc_helpers.h create mode 100644 tools/testing/selftests/bpf/progs/bpf_tcp_helpers.h diff --git a/tools/testing/selftests/bpf/bpf_tcp_helpers.h b/tools/testing/selftests/bpf/bpf_tcp_helpers.h deleted file mode 100644 index 82a7c9de95f9..000000000000 --- a/tools/testing/selftests/bpf/bpf_tcp_helpers.h +++ /dev/null @@ -1,241 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __BPF_TCP_HELPERS_H -#define __BPF_TCP_HELPERS_H - -#include <stdbool.h> -#include <linux/types.h> -#include <bpf/bpf_helpers.h> -#include <bpf/bpf_core_read.h> -#include <bpf/bpf_tracing.h> - -#define BPF_STRUCT_OPS(name, args...) \ -SEC("struct_ops/"#name) \ -BPF_PROG(name, args) - -#ifndef SOL_TCP -#define SOL_TCP 6 -#endif - -#ifndef TCP_CA_NAME_MAX -#define TCP_CA_NAME_MAX 16 -#endif - -#define tcp_jiffies32 ((__u32)bpf_jiffies64()) - -struct sock_common { - unsigned char skc_state; - __u16 skc_num; -} __attribute__((preserve_access_index)); - -enum sk_pacing { - SK_PACING_NONE = 0, - SK_PACING_NEEDED = 1, - SK_PACING_FQ = 2, -}; - -struct sock { - struct sock_common __sk_common; -#define sk_state __sk_common.skc_state - unsigned long sk_pacing_rate; - __u32 sk_pacing_status; /* see enum sk_pacing */ -} __attribute__((preserve_access_index)); - -struct inet_sock { - struct sock sk; -} __attribute__((preserve_access_index)); - -struct inet_connection_sock { - struct inet_sock icsk_inet; - __u8 icsk_ca_state:6, - icsk_ca_setsockopt:1, - icsk_ca_dst_locked:1; - struct { - __u8 pending; - } icsk_ack; - __u64 icsk_ca_priv[104 / sizeof(__u64)]; -} __attribute__((preserve_access_index)); - -struct request_sock { - struct sock_common __req_common; -} __attribute__((preserve_access_index)); - -struct tcp_sock { - struct inet_connection_sock inet_conn; - - __u32 rcv_nxt; - __u32 snd_nxt; - __u32 snd_una; - __u32 window_clamp; - __u8 ecn_flags; - __u32 delivered; - __u32 delivered_ce; - __u32 snd_cwnd; - __u32 snd_cwnd_cnt; - __u32 snd_cwnd_clamp; - __u32 snd_ssthresh; - __u8 syn_data:1, /* SYN includes data */ - syn_fastopen:1, /* SYN includes Fast Open option */ - syn_fastopen_exp:1,/* SYN includes Fast Open exp. option */ - syn_fastopen_ch:1, /* Active TFO re-enabling probe */ - syn_data_acked:1,/* data in SYN is acked by SYN-ACK */ - save_syn:1, /* Save headers of SYN packet */ - is_cwnd_limited:1,/* forward progress limited by snd_cwnd? */ - syn_smc:1; /* SYN includes SMC */ - __u32 max_packets_out; - __u32 lsndtime; - __u32 prior_cwnd; - __u64 tcp_mstamp; /* most recent packet received/sent */ - bool is_mptcp; -} __attribute__((preserve_access_index)); - -static __always_inline struct inet_connection_sock *inet_csk(const struct sock *sk) -{ - return (struct inet_connection_sock *)sk; -} - -static __always_inline void *inet_csk_ca(const struct sock *sk) -{ - return (void *)inet_csk(sk)->icsk_ca_priv; -} - -static __always_inline struct tcp_sock *tcp_sk(const struct sock *sk) -{ - return (struct tcp_sock *)sk; -} - -static __always_inline bool before(__u32 seq1, __u32 seq2) -{ - return (__s32)(seq1-seq2) < 0; -} -#define after(seq2, seq1) before(seq1, seq2) - -#define TCP_ECN_OK 1 -#define TCP_ECN_QUEUE_CWR 2 -#define TCP_ECN_DEMAND_CWR 4 -#define TCP_ECN_SEEN 8 - -enum inet_csk_ack_state_t { - ICSK_ACK_SCHED = 1, - ICSK_ACK_TIMER = 2, - ICSK_ACK_PUSHED = 4, - ICSK_ACK_PUSHED2 = 8, - ICSK_ACK_NOW = 16 /* Send the next ACK immediately (once) */ -}; - -enum tcp_ca_event { - CA_EVENT_TX_START = 0, - CA_EVENT_CWND_RESTART = 1, - CA_EVENT_COMPLETE_CWR = 2, - CA_EVENT_LOSS = 3, - CA_EVENT_ECN_NO_CE = 4, - CA_EVENT_ECN_IS_CE = 5, -}; - -struct ack_sample { - __u32 pkts_acked; - __s32 rtt_us; - __u32 in_flight; -} __attribute__((preserve_access_index)); - -struct rate_sample { - __u64 prior_mstamp; /* starting timestamp for interval */ - __u32 prior_delivered; /* tp->delivered at "prior_mstamp" */ - __s32 delivered; /* number of packets delivered over interval */ - long interval_us; /* time for tp->delivered to incr "delivered" */ - __u32 snd_interval_us; /* snd interval for delivered packets */ - __u32 rcv_interval_us; /* rcv interval for delivered packets */ - long rtt_us; /* RTT of last (S)ACKed packet (or -1) */ - int losses; /* number of packets marked lost upon ACK */ - __u32 acked_sacked; /* number of packets newly (S)ACKed upon ACK */ - __u32 prior_in_flight; /* in flight before this ACK */ - bool is_app_limited; /* is sample from packet with bubble in pipe? */ - bool is_retrans; /* is sample from retransmission? */ - bool is_ack_delayed; /* is this (likely) a delayed ACK? */ -} __attribute__((preserve_access_index)); - -#define TCP_CA_NAME_MAX 16 -#define TCP_CONG_NEEDS_ECN 0x2 - -struct tcp_congestion_ops { - char name[TCP_CA_NAME_MAX]; - __u32 flags; - - /* initialize private data (optional) */ - void (*init)(struct sock *sk); - /* cleanup private data (optional) */ - void (*release)(struct sock *sk); - - /* return slow start threshold (required) */ - __u32 (*ssthresh)(struct sock *sk); - /* do new cwnd calculation (required) */ - void (*cong_avoid)(struct sock *sk, __u32 ack, __u32 acked); - /* call before changing ca_state (optional) */ - void (*set_state)(struct sock *sk, __u8 new_state); - /* call when cwnd event occurs (optional) */ - void (*cwnd_event)(struct sock *sk, enum tcp_ca_event ev); - /* call when ack arrives (optional) */ - void (*in_ack_event)(struct sock *sk, __u32 flags); - /* new value of cwnd after loss (required) */ - __u32 (*undo_cwnd)(struct sock *sk); - /* hook for packet ack accounting (optional) */ - void (*pkts_acked)(struct sock *sk, const struct ack_sample *sample); - /* override sysctl_tcp_min_tso_segs */ - __u32 (*min_tso_segs)(struct sock *sk); - /* returns the multiplier used in tcp_sndbuf_expand (optional) */ - __u32 (*sndbuf_expand)(struct sock *sk); - /* call when packets are delivered to update cwnd and pacing rate, - * after all the ca_state processing. (optional) - */ - void (*cong_control)(struct sock *sk, const struct rate_sample *rs); - void *owner; -}; - -#define min(a, b) ((a) < (b) ? (a) : (b)) -#define max(a, b) ((a) > (b) ? (a) : (b)) -#define min_not_zero(x, y) ({ \ - typeof(x) __x = (x); \ - typeof(y) __y = (y); \ - __x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); }) - -static __always_inline bool tcp_in_slow_start(const struct tcp_sock *tp) -{ - return tp->snd_cwnd < tp->snd_ssthresh; -} - -static __always_inline bool tcp_is_cwnd_limited(const struct sock *sk) -{ - const struct tcp_sock *tp = tcp_sk(sk); - - /* If in slow start, ensure cwnd grows to twice what was ACKed. */ - if (tcp_in_slow_start(tp)) - return tp->snd_cwnd < 2 * tp->max_packets_out; - - return !!BPF_CORE_READ_BITFIELD(tp, is_cwnd_limited); -} - -static __always_inline bool tcp_cc_eq(const char *a, const char *b) -{ - int i; - - for (i = 0; i < TCP_CA_NAME_MAX; i++) { - if (a[i] != b[i]) - return false; - if (!a[i]) - break; - } - - return true; -} - -extern __u32 tcp_slow_start(struct tcp_sock *tp, __u32 acked) __ksym; -extern void tcp_cong_avoid_ai(struct tcp_sock *tp, __u32 w, __u32 acked) __ksym; - -struct mptcp_sock { - struct inet_connection_sock sk; - - __u32 token; - struct sock *first; - char ca_name[TCP_CA_NAME_MAX]; -} __attribute__((preserve_access_index)); - -#endif diff --git a/tools/testing/selftests/bpf/progs/bpf_cubic.c b/tools/testing/selftests/bpf/progs/bpf_cubic.c index d9660e7200e2..7759b61be912 100644 --- a/tools/testing/selftests/bpf/progs/bpf_cubic.c +++ b/tools/testing/selftests/bpf/progs/bpf_cubic.c @@ -14,9 +14,12 @@ * "ca->ack_cnt / delta" operation. */ -#include <linux/bpf.h> -#include <linux/stddef.h> -#include <linux/tcp.h> +#define bictcp bictcp___not_used +#include "vmlinux.h" +#undef bictcp + +#include <bpf/bpf_helpers.h> +#include <bpf/bpf_tracing.h> #include "bpf_tcp_helpers.h" char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/bpf_dctcp.c b/tools/testing/selftests/bpf/progs/bpf_dctcp.c index 9573be6122be..bd410316b09c 100644 --- a/tools/testing/selftests/bpf/progs/bpf_dctcp.c +++ b/tools/testing/selftests/bpf/progs/bpf_dctcp.c @@ -6,14 +6,14 @@ * the kernel BPF logic. */ -#include <stddef.h> -#include <linux/bpf.h> -#include <linux/types.h> -#include <linux/stddef.h> -#include <linux/tcp.h> +#define dctcp dctcp___not_used +#include "vmlinux.h" +#undef dctcp + #include <bpf/bpf_helpers.h> #include <bpf/bpf_tracing.h> #include "bpf_tcp_helpers.h" +#include "bpf_tracing_net.h" char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/bpf_dctcp_release.c b/tools/testing/selftests/bpf/progs/bpf_dctcp_release.c index d836f7c372f0..895dd3a3e2b9 100644 --- a/tools/testing/selftests/bpf/progs/bpf_dctcp_release.c +++ b/tools/testing/selftests/bpf/progs/bpf_dctcp_release.c @@ -1,14 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2021 Facebook */ -#include <stddef.h> -#include <linux/bpf.h> -#include <linux/types.h> -#include <linux/stddef.h> -#include <linux/tcp.h> +#include "vmlinux.h" + #include <bpf/bpf_helpers.h> -#include <bpf/bpf_tracing.h> #include "bpf_tcp_helpers.h" +#include "bpf_tracing_net.h" char _license[] SEC("license") = "GPL"; const char cubic[] = "cubic"; diff --git a/tools/testing/selftests/bpf/progs/bpf_tc_helpers.h b/tools/testing/selftests/bpf/progs/bpf_tc_helpers.h new file mode 100644 index 000000000000..fef72cba6298 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/bpf_tc_helpers.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __BPF_TC_HELPERS_H +#define __BPF_TC_HELPERS_H + +#define TC_ACT_OK 0 + +#endif diff --git a/tools/testing/selftests/bpf/progs/bpf_tcp_helpers.h b/tools/testing/selftests/bpf/progs/bpf_tcp_helpers.h new file mode 100644 index 000000000000..a8659fed2c18 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/bpf_tcp_helpers.h @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __BPF_TCP_HELPERS_H +#define __BPF_TCP_HELPERS_H + +#include <bpf/bpf_helpers.h> +#include <bpf/bpf_core_read.h> +#include <bpf/bpf_tracing.h> + +#include "bpf_tracing_net.h" + +#define BPF_STRUCT_OPS(name, args...) \ +SEC("struct_ops/"#name) \ +BPF_PROG(name, args) + +#define tcp_jiffies32 ((__u32)bpf_jiffies64()) + +static __always_inline struct inet_connection_sock *inet_csk(const struct sock *sk) +{ + return (struct inet_connection_sock *)sk; +} + +static __always_inline void *inet_csk_ca(const struct sock *sk) +{ + return (void *)inet_csk(sk)->icsk_ca_priv; +} + +static __always_inline struct tcp_sock *tcp_sk(const struct sock *sk) +{ + return (struct tcp_sock *)sk; +} + +static __always_inline bool before(__u32 seq1, __u32 seq2) +{ + return (__s32)(seq1-seq2) < 0; +} +#define after(seq2, seq1) before(seq1, seq2) + +#define TCP_ECN_OK 1 +#define TCP_ECN_QUEUE_CWR 2 +#define TCP_ECN_DEMAND_CWR 4 +#define TCP_ECN_SEEN 8 + +#define TCP_CONG_NEEDS_ECN 0x2 + +#define min(a, b) ((a) < (b) ? (a) : (b)) +#define max(a, b) ((a) > (b) ? (a) : (b)) +#define min_not_zero(x, y) ({ \ + typeof(x) __x = (x); \ + typeof(y) __y = (y); \ + __x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); }) + +static __always_inline bool tcp_in_slow_start(const struct tcp_sock *tp) +{ + return tp->snd_cwnd < tp->snd_ssthresh; +} + +static __always_inline bool tcp_is_cwnd_limited(const struct sock *sk) +{ + const struct tcp_sock *tp = tcp_sk(sk); + + /* If in slow start, ensure cwnd grows to twice what was ACKed. */ + if (tcp_in_slow_start(tp)) + return tp->snd_cwnd < 2 * tp->max_packets_out; + + return !!BPF_CORE_READ_BITFIELD(tp, is_cwnd_limited); +} + +static __always_inline bool tcp_cc_eq(const char *a, const char *b) +{ + int i; + + for (i = 0; i < TCP_CA_NAME_MAX; i++) { + if (a[i] != b[i]) + return false; + if (!a[i]) + break; + } + + return true; +} + +extern __u32 tcp_slow_start(struct tcp_sock *tp, __u32 acked) __ksym; +extern void tcp_cong_avoid_ai(struct tcp_sock *tp, __u32 w, __u32 acked) __ksym; + +#endif diff --git a/tools/testing/selftests/bpf/progs/bpf_tcp_nogpl.c b/tools/testing/selftests/bpf/progs/bpf_tcp_nogpl.c index 2ecd833dcd41..3734d49ccba9 100644 --- a/tools/testing/selftests/bpf/progs/bpf_tcp_nogpl.c +++ b/tools/testing/selftests/bpf/progs/bpf_tcp_nogpl.c @@ -1,9 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 -#include <linux/bpf.h> -#include <linux/types.h> +#include "vmlinux.h" + #include <bpf/bpf_helpers.h> -#include <bpf/bpf_tracing.h> #include "bpf_tcp_helpers.h" char _license[] SEC("license") = "X"; diff --git a/tools/testing/selftests/bpf/progs/bpf_tracing_net.h b/tools/testing/selftests/bpf/progs/bpf_tracing_net.h index 1c1289ba5fc5..f06410392efc 100644 --- a/tools/testing/selftests/bpf/progs/bpf_tracing_net.h +++ b/tools/testing/selftests/bpf/progs/bpf_tracing_net.h @@ -2,16 +2,24 @@ #ifndef __BPF_TRACING_NET_H__ #define __BPF_TRACING_NET_H__ +#define ETH_P_IPV6 0x86DD + #define AF_INET 2 #define AF_INET6 10 +#define SOL_IPV6 41 +#define IPV6_TCLASS 67 + #define SOL_SOCKET 1 #define SO_SNDBUF 7 #define __SO_ACCEPTCON (1 << 16) #define SOL_TCP 6 +#define TCP_WINDOW_CLAMP 10 #define TCP_CONGESTION 13 #define TCP_CA_NAME_MAX 16 +#define TCP_SAVE_SYN 27 +#define TCP_SAVED_SYN 28 #define ICSK_TIME_RETRANS 1 #define ICSK_TIME_PROBE0 3 diff --git a/tools/testing/selftests/bpf/progs/kfunc_call_test_subprog.c b/tools/testing/selftests/bpf/progs/kfunc_call_test_subprog.c index c1fdecabeabf..ce34ac85a378 100644 --- a/tools/testing/selftests/bpf/progs/kfunc_call_test_subprog.c +++ b/tools/testing/selftests/bpf/progs/kfunc_call_test_subprog.c @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2021 Facebook */ -#include <linux/bpf.h> +#include "vmlinux.h" + #include <bpf/bpf_helpers.h> -#include "bpf_tcp_helpers.h" +#include "bpf_tracing_net.h" extern const int bpf_prog_active __ksym; extern __u64 bpf_kfunc_call_test1(struct sock *sk, __u32 a, __u64 b, diff --git a/tools/testing/selftests/bpf/progs/mptcp_sock.c b/tools/testing/selftests/bpf/progs/mptcp_sock.c index 91a0d7eff2ac..b7a861b948b3 100644 --- a/tools/testing/selftests/bpf/progs/mptcp_sock.c +++ b/tools/testing/selftests/bpf/progs/mptcp_sock.c @@ -2,9 +2,12 @@ /* Copyright (c) 2020, Tessares SA. */ /* Copyright (c) 2022, SUSE. */ -#include <linux/bpf.h> +#include "vmlinux.h" + +#include <bpf/bpf_core_read.h> #include <bpf/bpf_helpers.h> -#include "bpf_tcp_helpers.h" +#include <bpf/bpf_tracing.h> +#include "bpf_tracing_net.h" char _license[] SEC("license") = "GPL"; __u32 token = 0; diff --git a/tools/testing/selftests/bpf/progs/sockopt_qos_to_cc.c b/tools/testing/selftests/bpf/progs/sockopt_qos_to_cc.c index 1bce83b6e3a7..ca712362cfe7 100644 --- a/tools/testing/selftests/bpf/progs/sockopt_qos_to_cc.c +++ b/tools/testing/selftests/bpf/progs/sockopt_qos_to_cc.c @@ -1,11 +1,10 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2021 Facebook */ -#include <string.h> -#include <linux/tcp.h> -#include <netinet/in.h> -#include <linux/bpf.h> +#include "vmlinux.h" + #include <bpf/bpf_helpers.h> #include "bpf_tcp_helpers.h" +#include "bpf_tracing_net.h" char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/tcp_ca_incompl_cong_ops.c b/tools/testing/selftests/bpf/progs/tcp_ca_incompl_cong_ops.c index 7bb872fb22dd..e3e523dc2822 100644 --- a/tools/testing/selftests/bpf/progs/tcp_ca_incompl_cong_ops.c +++ b/tools/testing/selftests/bpf/progs/tcp_ca_incompl_cong_ops.c @@ -2,16 +2,13 @@ #include "vmlinux.h" +#include "bpf_tcp_helpers.h" + #include <bpf/bpf_helpers.h> #include <bpf/bpf_tracing.h> char _license[] SEC("license") = "GPL"; -static inline struct tcp_sock *tcp_sk(const struct sock *sk) -{ - return (struct tcp_sock *)sk; -} - SEC("struct_ops/incompl_cong_ops_ssthresh") __u32 BPF_PROG(incompl_cong_ops_ssthresh, struct sock *sk) { diff --git a/tools/testing/selftests/bpf/progs/tcp_ca_write_sk_pacing.c b/tools/testing/selftests/bpf/progs/tcp_ca_write_sk_pacing.c index 43447704cf0e..dfd01deb1ed7 100644 --- a/tools/testing/selftests/bpf/progs/tcp_ca_write_sk_pacing.c +++ b/tools/testing/selftests/bpf/progs/tcp_ca_write_sk_pacing.c @@ -2,6 +2,8 @@ #include "vmlinux.h" +#include "bpf_tcp_helpers.h" + #include <bpf/bpf_helpers.h> #include <bpf/bpf_tracing.h> @@ -9,13 +11,6 @@ char _license[] SEC("license") = "GPL"; #define USEC_PER_SEC 1000000UL -#define min(a, b) ((a) < (b) ? (a) : (b)) - -static inline struct tcp_sock *tcp_sk(const struct sock *sk) -{ - return (struct tcp_sock *)sk; -} - SEC("struct_ops/write_sk_pacing_init") void BPF_PROG(write_sk_pacing_init, struct sock *sk) { diff --git a/tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c b/tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c index e2bea4da194b..72c20d40468b 100644 --- a/tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c +++ b/tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c @@ -1,19 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2020 Facebook */ -#include <string.h> -#include <errno.h> -#include <netinet/in.h> -#include <linux/stddef.h> -#include <linux/bpf.h> -#include <linux/ipv6.h> -#include <linux/tcp.h> -#include <linux/if_ether.h> -#include <linux/pkt_cls.h> +#include "vmlinux.h" +#include <errno.h> #include <bpf/bpf_helpers.h> #include <bpf/bpf_endian.h> -#include "bpf_tcp_helpers.h" +#include "bpf_tc_helpers.h" +#include "bpf_tracing_net.h" struct sockaddr_in6 srv_sa6 = {}; __u16 listen_tp_sport = 0; diff --git a/tools/testing/selftests/bpf/progs/test_sock_fields.c b/tools/testing/selftests/bpf/progs/test_sock_fields.c index 9f4b8f9f1181..d9ee861061aa 100644 --- a/tools/testing/selftests/bpf/progs/test_sock_fields.c +++ b/tools/testing/selftests/bpf/progs/test_sock_fields.c @@ -1,13 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2019 Facebook */ -#include <linux/bpf.h> -#include <netinet/in.h> -#include <stdbool.h> +#include "vmlinux.h" #include <bpf/bpf_helpers.h> #include <bpf/bpf_endian.h> -#include "bpf_tcp_helpers.h" +#include "bpf_tracing_net.h" enum bpf_linum_array_idx { EGRESS_LINUM_IDX, diff --git a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c index 3ded05280757..5315a1ec06a2 100644 --- a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c +++ b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c @@ -1,30 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 -#include <stddef.h> -#include <string.h> -#include <netinet/in.h> -#include <linux/bpf.h> -#include <linux/if_ether.h> -#include <linux/if_packet.h> -#include <linux/ip.h> -#include <linux/ipv6.h> -#include <linux/types.h> -#include <linux/socket.h> -#include <linux/tcp.h> +#include "vmlinux.h" + #include <bpf/bpf_helpers.h> #include <bpf/bpf_endian.h> -#include "bpf_tcp_helpers.h" +#include "bpf_tracing_net.h" #include "test_tcpbpf.h" struct tcpbpf_globals global = {}; -/** - * SOL_TCP is defined in <netinet/tcp.h> while - * TCP_SAVED_SYN is defined in already included <linux/tcp.h> - */ -#ifndef SOL_TCP -#define SOL_TCP 6 -#endif - static __always_inline int get_tp_window_clamp(struct bpf_sock_ops *skops) { struct bpf_sock *sk; diff --git a/tools/testing/selftests/bpf/progs/timer.c b/tools/testing/selftests/bpf/progs/timer.c index 5f5309791649..c2aa74aef4e0 100644 --- a/tools/testing/selftests/bpf/progs/timer.c +++ b/tools/testing/selftests/bpf/progs/timer.c @@ -4,7 +4,7 @@ #include <time.h> #include <errno.h> #include <bpf/bpf_helpers.h> -#include "bpf_tcp_helpers.h" +#include <bpf/bpf_tracing.h> char _license[] SEC("license") = "GPL"; struct hmap_elem { diff --git a/tools/testing/selftests/bpf/progs/timer_mim.c b/tools/testing/selftests/bpf/progs/timer_mim.c index 2fee7ab105ef..50ebc3f68522 100644 --- a/tools/testing/selftests/bpf/progs/timer_mim.c +++ b/tools/testing/selftests/bpf/progs/timer_mim.c @@ -4,7 +4,7 @@ #include <time.h> #include <errno.h> #include <bpf/bpf_helpers.h> -#include "bpf_tcp_helpers.h" +#include <bpf/bpf_tracing.h> char _license[] SEC("license") = "GPL"; struct hmap_elem { diff --git a/tools/testing/selftests/bpf/progs/timer_mim_reject.c b/tools/testing/selftests/bpf/progs/timer_mim_reject.c index 5d648e3d8a41..dd3f1ed6d6e6 100644 --- a/tools/testing/selftests/bpf/progs/timer_mim_reject.c +++ b/tools/testing/selftests/bpf/progs/timer_mim_reject.c @@ -4,7 +4,7 @@ #include <time.h> #include <errno.h> #include <bpf/bpf_helpers.h> -#include "bpf_tcp_helpers.h" +#include <bpf/bpf_tracing.h> char _license[] SEC("license") = "GPL"; struct hmap_elem { -- 2.30.2

2 years, 10 months

2
1
0 0

Re: [PATCH v4] kselftests/damon: add support for cases where debugfs cannot be read

by Gautam Menghani

Cc'ing everyone as I forgot to group reply before. Also, I have included the example outputs in this reply. On Tue, Jun 28, 2022 at 12:12:15AM +0530, Gautam Menghani wrote: > On Mon, Jun 27, 2022 at 11:00:18AM -0600, Shuah Khan wrote: > > On 6/25/22 2:03 PM, SeongJae Park wrote: > > > Hi Gautam, > > > > > > On Sun, 26 Jun 2022 01:22:45 +0530 Gautam <gautammenghani201(a)gmail.com> wrote: > > > > > > > The kernel is in lockdown mode when secureboot is enabled and hence > > > > debugfs cannot be used. Add support for this and other general cases > > > > where debugfs cannot be read and communicate the same to the user before > > > > running tests. > > > > > > > > Signed-off-by: Gautam <gautammenghani201(a)gmail.com> > > > > > > Reviewed-by: SeongJae Park <sj(a)kernel.org> > > > > > > > > > Thanks, > > > SJ > > > > > > > --- > > > > Changes in v2: > > > > 1. Modify the error message to account for general cases. > > > > 2. Change the return code so that the test is skipped. > > > > > > > > Changes in v3: > > > > 1. Change the name of variable holding the error message. > > > > > > > > Changes in v4: > > > > 1. Correct the mode of the source file. > > > > > > > > tools/testing/selftests/damon/_chk_dependency.sh | 10 ++++++++++ > > > > 1 file changed, 10 insertions(+) > > > > > > > > diff --git a/tools/testing/selftests/damon/_chk_dependency.sh b/tools/testing/selftests/damon/_chk_dependency.sh > > > > index 0189db81550b..0328ac0b5a5e 100644 > > > > --- a/tools/testing/selftests/damon/_chk_dependency.sh > > > > +++ b/tools/testing/selftests/damon/_chk_dependency.sh > > > > @@ -26,3 +26,13 @@ do > > > > exit 1 > > > > fi > > > > done > > > > + > > > > +permission_error="Operation not permitted" > > > > +for f in attrs target_ids monitor_on > > > > +do > > > > + status=$( cat "$DBGFS/$f" 2>&1 ) > > > > + if [ "${status#*$permission_error}" != "$status" ]; then > > > > + echo "Permission for reading $DBGFS/$f denied; maybe secureboot enabled?" > > > > btw - does this run as a regular user or does it need root privilege? > > If so add a test for that and skip with a message. > > Yes this condition is reachable only with root user. If damon tests are run > as regular user, the root check condition already skips the tests. > > Tests output as regular user: > +TAP version 13 > +1..6 > +# selftests: damon: debugfs_attrs.sh > +# Run as root > +ok 1 selftests: damon: debugfs_attrs.sh # SKIP > +# selftests: damon: debugfs_schemes.sh > +# Run as root > > Tests output as root user: > +TAP version 13 > +1..6 > +# selftests: damon: debugfs_attrs.sh > +# Permission for reading /sys/kernel/debug/damon/attrs denied; maybe secureboot enabled? > +ok 1 selftests: damon: debugfs_attrs.sh # SKIP > +# selftests: damon: debugfs_schemes.sh > +# Permission for reading /sys/kernel/debug/damon/attrs denied; maybe secureboot enabled? > > Is any change needed in this patch? > > > > > + exit $ksft_skip > > > > + fi > > > > +done > > > > -- > > > > 2.36.1 > > > > > thanks, > > -- Shuah

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 5.15 11/41] selftests: vm: Fix resource leak when return error

by Sasha Levin

From: Ding Xiang <dingxiang(a)cmss.chinamobile.com> [ Upstream commit 3084a4ec7f9bb1ec90036cfd01b1abadc5dd4fb2 ] When return on an error path, file handle need to be closed to prevent resource leak Signed-off-by: Ding Xiang <dingxiang(a)cmss.chinamobile.com> Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/vm/ksm_tests.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/vm/ksm_tests.c b/tools/testing/selftests/vm/ksm_tests.c index b61dcdb44c5b..b31f7a17d92a 100644 --- a/tools/testing/selftests/vm/ksm_tests.c +++ b/tools/testing/selftests/vm/ksm_tests.c @@ -48,6 +48,7 @@ static int ksm_write_sysfs(const char *file_path, unsigned long val) } if (fprintf(f, "%lu", val) < 0) { perror("fprintf"); + fclose(f); return 1; } fclose(f); @@ -66,6 +67,7 @@ static int ksm_read_sysfs(const char *file_path, unsigned long *val) } if (fscanf(f, "%lu", val) != 1) { perror("fscanf"); + fclose(f); return 1; } fclose(f); -- 2.35.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 5.18 17/53] selftests/bpf: Shuffle cookies symbols in kprobe multi test

by Sasha Levin

From: Jiri Olsa <jolsa(a)kernel.org> [ Upstream commit ad8848535e97f4a5374fc68f7a5d16e2565940cc ] There's a kernel bug that causes cookies to be misplaced and the reason we did not catch this with this test is that we provide bpf_fentry_test* functions already sorted by name. Shuffling function bpf_fentry_test2 deeper in the list and keeping the current cookie values as before will trigger the bug. The kernel fix is coming in following changes. Acked-by: Song Liu <songliubraving(a)fb.com> Signed-off-by: Jiri Olsa <jolsa(a)kernel.org> Link: https://lore.kernel.org/r/20220615112118.497303-2-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/bpf/prog_tests/bpf_cookie.c | 78 +++++++++---------- .../selftests/bpf/progs/kprobe_multi.c | 24 +++--- 2 files changed, 51 insertions(+), 51 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c b/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c index 923a6139b2d8..aebbbb8f983f 100644 --- a/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c +++ b/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c @@ -118,24 +118,24 @@ static void kprobe_multi_link_api_subtest(void) }) GET_ADDR("bpf_fentry_test1", addrs[0]); - GET_ADDR("bpf_fentry_test2", addrs[1]); - GET_ADDR("bpf_fentry_test3", addrs[2]); - GET_ADDR("bpf_fentry_test4", addrs[3]); - GET_ADDR("bpf_fentry_test5", addrs[4]); - GET_ADDR("bpf_fentry_test6", addrs[5]); - GET_ADDR("bpf_fentry_test7", addrs[6]); + GET_ADDR("bpf_fentry_test3", addrs[1]); + GET_ADDR("bpf_fentry_test4", addrs[2]); + GET_ADDR("bpf_fentry_test5", addrs[3]); + GET_ADDR("bpf_fentry_test6", addrs[4]); + GET_ADDR("bpf_fentry_test7", addrs[5]); + GET_ADDR("bpf_fentry_test2", addrs[6]); GET_ADDR("bpf_fentry_test8", addrs[7]); #undef GET_ADDR - cookies[0] = 1; - cookies[1] = 2; - cookies[2] = 3; - cookies[3] = 4; - cookies[4] = 5; - cookies[5] = 6; - cookies[6] = 7; - cookies[7] = 8; + cookies[0] = 1; /* bpf_fentry_test1 */ + cookies[1] = 2; /* bpf_fentry_test3 */ + cookies[2] = 3; /* bpf_fentry_test4 */ + cookies[3] = 4; /* bpf_fentry_test5 */ + cookies[4] = 5; /* bpf_fentry_test6 */ + cookies[5] = 6; /* bpf_fentry_test7 */ + cookies[6] = 7; /* bpf_fentry_test2 */ + cookies[7] = 8; /* bpf_fentry_test8 */ opts.kprobe_multi.addrs = (const unsigned long *) &addrs; opts.kprobe_multi.cnt = ARRAY_SIZE(addrs); @@ -146,14 +146,14 @@ static void kprobe_multi_link_api_subtest(void) if (!ASSERT_GE(link1_fd, 0, "link1_fd")) goto cleanup; - cookies[0] = 8; - cookies[1] = 7; - cookies[2] = 6; - cookies[3] = 5; - cookies[4] = 4; - cookies[5] = 3; - cookies[6] = 2; - cookies[7] = 1; + cookies[0] = 8; /* bpf_fentry_test1 */ + cookies[1] = 7; /* bpf_fentry_test3 */ + cookies[2] = 6; /* bpf_fentry_test4 */ + cookies[3] = 5; /* bpf_fentry_test5 */ + cookies[4] = 4; /* bpf_fentry_test6 */ + cookies[5] = 3; /* bpf_fentry_test7 */ + cookies[6] = 2; /* bpf_fentry_test2 */ + cookies[7] = 1; /* bpf_fentry_test8 */ opts.kprobe_multi.flags = BPF_F_KPROBE_MULTI_RETURN; prog_fd = bpf_program__fd(skel->progs.test_kretprobe); @@ -178,12 +178,12 @@ static void kprobe_multi_attach_api_subtest(void) struct kprobe_multi *skel = NULL; const char *syms[8] = { "bpf_fentry_test1", - "bpf_fentry_test2", "bpf_fentry_test3", "bpf_fentry_test4", "bpf_fentry_test5", "bpf_fentry_test6", "bpf_fentry_test7", + "bpf_fentry_test2", "bpf_fentry_test8", }; __u64 cookies[8]; @@ -195,14 +195,14 @@ static void kprobe_multi_attach_api_subtest(void) skel->bss->pid = getpid(); skel->bss->test_cookie = true; - cookies[0] = 1; - cookies[1] = 2; - cookies[2] = 3; - cookies[3] = 4; - cookies[4] = 5; - cookies[5] = 6; - cookies[6] = 7; - cookies[7] = 8; + cookies[0] = 1; /* bpf_fentry_test1 */ + cookies[1] = 2; /* bpf_fentry_test3 */ + cookies[2] = 3; /* bpf_fentry_test4 */ + cookies[3] = 4; /* bpf_fentry_test5 */ + cookies[4] = 5; /* bpf_fentry_test6 */ + cookies[5] = 6; /* bpf_fentry_test7 */ + cookies[6] = 7; /* bpf_fentry_test2 */ + cookies[7] = 8; /* bpf_fentry_test8 */ opts.syms = syms; opts.cnt = ARRAY_SIZE(syms); @@ -213,14 +213,14 @@ static void kprobe_multi_attach_api_subtest(void) if (!ASSERT_OK_PTR(link1, "bpf_program__attach_kprobe_multi_opts")) goto cleanup; - cookies[0] = 8; - cookies[1] = 7; - cookies[2] = 6; - cookies[3] = 5; - cookies[4] = 4; - cookies[5] = 3; - cookies[6] = 2; - cookies[7] = 1; + cookies[0] = 8; /* bpf_fentry_test1 */ + cookies[1] = 7; /* bpf_fentry_test3 */ + cookies[2] = 6; /* bpf_fentry_test4 */ + cookies[3] = 5; /* bpf_fentry_test5 */ + cookies[4] = 4; /* bpf_fentry_test6 */ + cookies[5] = 3; /* bpf_fentry_test7 */ + cookies[6] = 2; /* bpf_fentry_test2 */ + cookies[7] = 1; /* bpf_fentry_test8 */ opts.retprobe = true; diff --git a/tools/testing/selftests/bpf/progs/kprobe_multi.c b/tools/testing/selftests/bpf/progs/kprobe_multi.c index 600be50800f8..8e06c49aa65a 100644 --- a/tools/testing/selftests/bpf/progs/kprobe_multi.c +++ b/tools/testing/selftests/bpf/progs/kprobe_multi.c @@ -54,21 +54,21 @@ static void kprobe_multi_check(void *ctx, bool is_return) if (is_return) { SET(kretprobe_test1_result, &bpf_fentry_test1, 8); - SET(kretprobe_test2_result, &bpf_fentry_test2, 7); - SET(kretprobe_test3_result, &bpf_fentry_test3, 6); - SET(kretprobe_test4_result, &bpf_fentry_test4, 5); - SET(kretprobe_test5_result, &bpf_fentry_test5, 4); - SET(kretprobe_test6_result, &bpf_fentry_test6, 3); - SET(kretprobe_test7_result, &bpf_fentry_test7, 2); + SET(kretprobe_test2_result, &bpf_fentry_test2, 2); + SET(kretprobe_test3_result, &bpf_fentry_test3, 7); + SET(kretprobe_test4_result, &bpf_fentry_test4, 6); + SET(kretprobe_test5_result, &bpf_fentry_test5, 5); + SET(kretprobe_test6_result, &bpf_fentry_test6, 4); + SET(kretprobe_test7_result, &bpf_fentry_test7, 3); SET(kretprobe_test8_result, &bpf_fentry_test8, 1); } else { SET(kprobe_test1_result, &bpf_fentry_test1, 1); - SET(kprobe_test2_result, &bpf_fentry_test2, 2); - SET(kprobe_test3_result, &bpf_fentry_test3, 3); - SET(kprobe_test4_result, &bpf_fentry_test4, 4); - SET(kprobe_test5_result, &bpf_fentry_test5, 5); - SET(kprobe_test6_result, &bpf_fentry_test6, 6); - SET(kprobe_test7_result, &bpf_fentry_test7, 7); + SET(kprobe_test2_result, &bpf_fentry_test2, 7); + SET(kprobe_test3_result, &bpf_fentry_test3, 2); + SET(kprobe_test4_result, &bpf_fentry_test4, 3); + SET(kprobe_test5_result, &bpf_fentry_test5, 4); + SET(kprobe_test6_result, &bpf_fentry_test6, 5); + SET(kprobe_test7_result, &bpf_fentry_test7, 6); SET(kprobe_test8_result, &bpf_fentry_test8, 8); } -- 2.35.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 5.18 13/53] selftests: vm: Fix resource leak when return error

by Sasha Levin

From: Ding Xiang <dingxiang(a)cmss.chinamobile.com> [ Upstream commit 3084a4ec7f9bb1ec90036cfd01b1abadc5dd4fb2 ] When return on an error path, file handle need to be closed to prevent resource leak Signed-off-by: Ding Xiang <dingxiang(a)cmss.chinamobile.com> Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/vm/ksm_tests.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/vm/ksm_tests.c b/tools/testing/selftests/vm/ksm_tests.c index fd85f15869d1..aa834b04daa8 100644 --- a/tools/testing/selftests/vm/ksm_tests.c +++ b/tools/testing/selftests/vm/ksm_tests.c @@ -54,6 +54,7 @@ static int ksm_write_sysfs(const char *file_path, unsigned long val) } if (fprintf(f, "%lu", val) < 0) { perror("fprintf"); + fclose(f); return 1; } fclose(f); @@ -72,6 +73,7 @@ static int ksm_read_sysfs(const char *file_path, unsigned long *val) } if (fscanf(f, "%lu", val) != 1) { perror("fscanf"); + fclose(f); return 1; } fclose(f); -- 2.35.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 5.18 09/53] selftests: Fix clang cross compilation

by Sasha Levin

From: Mark Brown <broonie(a)kernel.org> [ Upstream commit 795285ef242543bb636556b7225f20adb7d3795c ] Unlike GCC clang uses a single compiler image to support multiple target architectures meaning that we can't simply rely on CROSS_COMPILE to select the output architecture. Instead we must pass --target to the compiler to tell it what to output, kselftest was not doing this so cross compilation of kselftest using clang resulted in kselftest being built for the host architecture. More work is required to fix tests using custom rules but this gets the bulk of things building. Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/lib.mk | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 2a2d240cdc1b..1a5cc3cd97ec 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -7,10 +7,31 @@ else ifneq ($(filter -%,$(LLVM)),) LLVM_SUFFIX := $(LLVM) endif -CC := $(LLVM_PREFIX)clang$(LLVM_SUFFIX) +CLANG_TARGET_FLAGS_arm := arm-linux-gnueabi +CLANG_TARGET_FLAGS_arm64 := aarch64-linux-gnu +CLANG_TARGET_FLAGS_hexagon := hexagon-linux-musl +CLANG_TARGET_FLAGS_m68k := m68k-linux-gnu +CLANG_TARGET_FLAGS_mips := mipsel-linux-gnu +CLANG_TARGET_FLAGS_powerpc := powerpc64le-linux-gnu +CLANG_TARGET_FLAGS_riscv := riscv64-linux-gnu +CLANG_TARGET_FLAGS_s390 := s390x-linux-gnu +CLANG_TARGET_FLAGS_x86 := x86_64-linux-gnu +CLANG_TARGET_FLAGS := $(CLANG_TARGET_FLAGS_$(ARCH)) + +ifeq ($(CROSS_COMPILE),) +ifeq ($(CLANG_TARGET_FLAGS),) +$(error Specify CROSS_COMPILE or add '--target=' option to lib.mk +else +CLANG_FLAGS += --target=$(CLANG_TARGET_FLAGS) +endif # CLANG_TARGET_FLAGS +else +CLANG_FLAGS += --target=$(notdir $(CROSS_COMPILE:%-=%)) +endif # CROSS_COMPILE + +CC := $(LLVM_PREFIX)clang$(LLVM_SUFFIX) $(CLANG_FLAGS) -fintegrated-as else CC := $(CROSS_COMPILE)gcc -endif +endif # LLVM ifeq (0,$(MAKELEVEL)) ifeq ($(OUTPUT),) -- 2.35.1

2 years, 10 months

1
0
0 0

kselftest/next kselftest-seccomp: 6 runs, 1 regressions (v5.19-rc4-4-g43fe0cc46b62)

by kernelci.org bot

kselftest/next kselftest-seccomp: 6 runs, 1 regressions (v5.19-rc4-4-g43fe0cc46b62) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | gcc-10 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v5.19-rc4-4-g43f… Test: kselftest-seccomp Tree: kselftest Branch: next Describe: v5.19-rc4-4-g43fe0cc46b62 URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: 43fe0cc46b6206b25f0f13bb249f0078441ae15a Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | gcc-10 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/62ba5536844f0e323ea39bec Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-10 (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-4-g43fe0cc46b62/arm6… HTML log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-4-g43fe0cc46b62/arm6… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bullseye-kselftest/2022062… * kselftest-seccomp.login: https://kernelci.org/test/case/id/62ba5536844f0e323ea39bed new failure (last pass: v5.19-rc1)

2 years, 10 months

1
0
0 0

kselftest/next build: 8 builds: 0 failed, 8 passed (v5.19-rc4-4-g43fe0cc46b62)

by kernelci.org bot

kselftest/next build: 8 builds: 0 failed, 8 passed (v5.19-rc4-4-g43fe0cc46b62) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v5.19-rc4-4-g43fe0c… Tree: kselftest Branch: next Git Describe: v5.19-rc4-4-g43fe0cc46b62 Git Commit: 43fe0cc46b6206b25f0f13bb249f0078441ae15a Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

2 years, 10 months

1
0
0 0

[PATCH] kunit: tool: Enable virtio/PCI by default on UML

by David Gow

There are several tests which depend on PCI, and hence need a bunch of extra options to run under UML. This makes it awkward to give configuration instructions (whether in documentation, or as part of a .kunitconfig file), as two separate, incompatible sets of config options are required for UML and "most other architectures". For non-UML architectures, it's possible to add default kconfig options via the qemu_config python files, but there's no equivalent for UML. Add a new tools/testing/kunit/configs/arch_uml.config file containing extra kconfig options to use on UML. Signed-off-by: David Gow <davidgow(a)google.com> --- NOTE: This has dependencies on the 'make --kunitconfig repeatable' series: https://lore.kernel.org/linux-kselftest/20220624001247.3255978-1-dlatypov@g… which, in turn, depends on: https://lore.kernel.org/linux-kselftest/20220520224200.3764027-1-dlatypov@g… Please apply those first. Changes since RFC: https://lore.kernel.org/linux-kselftest/20220622035326.759935-1-davidgow@go… - Rebase on top of the previous kconfig patches. - Fix a missing make_arch_qemuconfig->make_arch_config rename (Thanks Brendan) - Fix the tests to use the base LinuxSourceTreeOperations class, which has no default kconfig options (and so won't conflict with those set in the tests). Only test_build_reconfig_existing_config actually failed, but I updated a few more in case the defaults changed. --- tools/testing/kunit/configs/arch_uml.config | 5 +++++ tools/testing/kunit/kunit_kernel.py | 14 ++++++++++---- tools/testing/kunit/kunit_tool_test.py | 12 ++++++++++++ 3 files changed, 27 insertions(+), 4 deletions(-) create mode 100644 tools/testing/kunit/configs/arch_uml.config diff --git a/tools/testing/kunit/configs/arch_uml.config b/tools/testing/kunit/configs/arch_uml.config new file mode 100644 index 000000000000..e824ce43b05a --- /dev/null +++ b/tools/testing/kunit/configs/arch_uml.config @@ -0,0 +1,5 @@ +# Config options which are added to UML builds by default + +# Enable virtio/pci, as a lot of tests require it. +CONFIG_VIRTIO_UML=y +CONFIG_UML_PCI_OVER_VIRTIO=y diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index fc415ff7530e..127598fb994b 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -26,6 +26,7 @@ KUNITCONFIG_PATH = '.kunitconfig' OLD_KUNITCONFIG_PATH = 'last_used_kunitconfig' DEFAULT_KUNITCONFIG_PATH = 'tools/testing/kunit/configs/default.config' BROKEN_ALLCONFIG_PATH = 'tools/testing/kunit/configs/broken_on_uml.config' +UML_KCONFIG_PATH = 'tools/testing/kunit/configs/arch_uml.config' OUTFILE_PATH = 'test.log' ABS_TOOL_PATH = os.path.abspath(os.path.dirname(__file__)) QEMU_CONFIGS_DIR = os.path.join(ABS_TOOL_PATH, 'qemu_configs') @@ -53,7 +54,7 @@ class LinuxSourceTreeOperations: except subprocess.CalledProcessError as e: raise ConfigError(e.output.decode()) - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: return base_kunitconfig def make_allyesconfig(self, build_dir: str, make_options) -> None: @@ -109,7 +110,7 @@ class LinuxSourceTreeOperationsQemu(LinuxSourceTreeOperations): self._kernel_command_line = qemu_arch_params.kernel_command_line + ' kunit_shutdown=reboot' self._extra_qemu_params = qemu_arch_params.extra_qemu_params - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: kconfig = kunit_config.parse_from_string(self._kconfig) kconfig.merge_in_entries(base_kunitconfig) return kconfig @@ -138,6 +139,11 @@ class LinuxSourceTreeOperationsUml(LinuxSourceTreeOperations): def __init__(self, cross_compile=None): super().__init__(linux_arch='um', cross_compile=cross_compile) + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + kconfig = kunit_config.parse_file(UML_KCONFIG_PATH) + kconfig.merge_in_entries(base_kunitconfig) + return kconfig + def make_allyesconfig(self, build_dir: str, make_options) -> None: kunit_parser.print_with_timestamp( 'Enabling all CONFIGs for UML...') @@ -297,7 +303,7 @@ class LinuxSourceTree: if build_dir and not os.path.exists(build_dir): os.mkdir(build_dir) try: - self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_config(self._kconfig) self._kconfig.write_to_file(kconfig_path) self._ops.make_olddefconfig(build_dir, make_options) except ConfigError as e: @@ -328,7 +334,7 @@ class LinuxSourceTree: return self.build_config(build_dir, make_options) existing_kconfig = kunit_config.parse_file(kconfig_path) - self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_config(self._kconfig) if self._kconfig.is_subset_of(existing_kconfig) and not self._kunitconfig_changed(build_dir): return True diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index e21ae1331350..08cb2dc8ef7d 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -430,6 +430,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations(None, None) mock_build_config = mock.patch.object(tree, 'build_config').start() # Should generate the .config @@ -447,6 +451,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y\nCONFIG_KUNIT_TEST=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations(None, None) mock_build_config = mock.patch.object(tree, 'build_config').start() self.assertTrue(tree.build_reconfig(build_dir, make_options=[])) @@ -463,6 +471,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y\nCONFIG_KUNIT_TEST=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations(None, None) mock_build_config = mock.patch.object(tree, 'build_config').start() # ... so we should trigger a call to build_config() -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 10 months

3
3
0 0

Re: [PATCH v12 3/4] trace/objtrace: Add testcases for objtrace

by Masami Hiramatsu

Hi, This looks good to me (and I tested). Tested-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> BTW, please use 'selftests/ftrace:' tag instead of (or in addition to) 'trace/objtrace:' for the ftracetest patch. And please Cc to linux-kselftest(a)vger.kernel.org and Shuah Khan. Thank you, On Tue, 7 Jun 2022 00:09:42 +0800 Jeff Xie <xiehuan09(a)gmail.com> wrote: > Add a series of testcases to illustrate correct and incorrect usage of > objtrace trigger. > > Signed-off-by: Jeff Xie <xiehuan09(a)gmail.com> > --- > .../ftrace/test.d/trigger/trigger-objtrace.tc | 41 +++++++++++++++++++ > 1 file changed, 41 insertions(+) > create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc > > diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc > new file mode 100644 > index 000000000000..d894442b6a30 > --- /dev/null > +++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc > @@ -0,0 +1,41 @@ > +#!/bin/sh > +# SPDX-License-Identifier: GPL-2.0 > +# description: event trigger - test objtrace-trigger > +# requires: kprobe_events "objtrace":README > + > +fail() { #msg > + echo $1 > + exit_fail > +} > + > +echo 'p bio_add_page arg1=$arg1 arg2=$arg2' > kprobe_events > + > +FEATURE=`grep objtrace events/kprobes/p_bio_add_page_0/trigger` > +if [ -z "$FEATURE" ]; then > + echo "objtrace trigger is not supported" > + exit_unsupported > +fi > + > +echo "Test objtrace trigger" > +echo 'objtrace:add:arg1,0x28:u32:1 if comm == "cat"' > \ > + events/kprobes/p_bio_add_page_0/trigger > +if [ -z $? ]; then > + fail "objtrace trigger syntax error" > +fi > + > +echo "Test objtrace semantic errors" > + > +# Being lack of objtrace command > +! echo 'objtrace:arg1,0x28:u32:1' > events/kprobes/p_bio_add_page_0/trigger > +# Bad parameter name > +! echo 'objtrace:add:argx:u32:1' > events/kprobes/p_bio_add_page_0/trigger > +# The parameter existed on event > +! echo 'objtrace:add:arg2:u32:1' > events/kprobes/p_bio_add_page_0/trigger > + > +echo "reset objtrace trigger" > + > +echo '!objtrace:add:arg1,0x28:u32' > \ > + events/kprobes/p_bio_add_page_0/trigger > +echo '-:p_bio_add_page_0' >> ./kprobe_events > + > +exit 0 > -- > 2.25.1 > -- Masami Hiramatsu (Google) <mhiramat(a)kernel.org>

2 years, 10 months

3
2
0 0

[PATCH] kselftests/damon: add support for checking secureboot status

by Gautam

The kernel is in lockdown mode when secureboot is enabled and hence debugfs cannot be used. But the error printed after running tests does not indicate this currently: >TAP version 13 >1..6 ># selftests: damon: debugfs_attrs.sh ># cat: /sys/kernel/debug/damon/monitor_on: Operation not permitted ># _debugfs_common.sh: line 48: [: =: unary operator expected ># cat: /sys/kernel/debug/damon/attrs: Operation not permitted ># _debugfs_common.sh: line 11: /sys/kernel/debug/damon/attrs: Operation > not permitted ># writing 1 2 3 4 5 to /sys/kernel/debug/damon/attrs doesn't return 0 ># expected because: valid input ># _debugfs_common.sh: line 16: /sys/kernel/debug/damon/attrs: Operation > not permitted >not ok 1 selftests: damon: debugfs_attrs.sh # exit=1 After adding the check for secureboot, the output is as follows: >TAP version 13 >1..6 ># selftests: damon: debugfs_attrs.sh ># debugfs cannot work with secureboot enabled >not ok 1 selftests: damon: debugfs_attrs.sh # exit=1 Signed-off-by: Gautam <gautammenghani201(a)gmail.com> --- tools/testing/selftests/damon/_chk_dependency.sh | 10 ++++++++++ 1 file changed, 10 insertions(+) mode change 100644 => 100755 tools/testing/selftests/damon/_chk_dependency.sh diff --git a/tools/testing/selftests/damon/_chk_dependency.sh b/tools/testing/selftests/damon/_chk_dependency.sh old mode 100644 new mode 100755 index 0189db81550b..6e45c1fe230e --- a/tools/testing/selftests/damon/_chk_dependency.sh +++ b/tools/testing/selftests/damon/_chk_dependency.sh @@ -26,3 +26,13 @@ do exit 1 fi done + +secureboot_error="Operation not permitted" +for f in attrs target_ids monitor_on +do + status=$( cat "$DBGFS/$f" 2>&1 ) + if [ "${status#*$secureboot_error}" != "$status" ]; then + echo "debugfs cannot work with secureboot enabled" + exit 1 + fi +done -- 2.36.1

2 years, 10 months

4
9
0 0

[PATCH] kselftests: Enable the echo command to print newlines in Makefile

by Gautam

In the install section of the main Makefile of kselftests, the echo command is used with -n flag, which disables the printing of new line due to which the output contains "\n" chars as follows: Emit Tests for alsa\nSkipping non-existent dir: arm64 Emit Tests for breakpoints\nEmit Tests for capabilities\n This patch fixes the above bug by using the -e flag. Signed-off-by: Gautam <gautammenghani201(a)gmail.com> --- tools/testing/selftests/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index de11992dc577..52e31437f1a3 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -253,7 +253,7 @@ ifdef INSTALL_PATH for TARGET in $(TARGETS); do \ BUILD_TARGET=$$BUILD/$$TARGET; \ [ ! -d $(INSTALL_PATH)/$$TARGET ] && echo "Skipping non-existent dir: $$TARGET" && continue; \ - echo -n "Emit Tests for $$TARGET\n"; \ + echo -ne "Emit Tests for $$TARGET\n"; \ $(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET COLLECTION=$$TARGET \ -C $$TARGET emit_tests >> $(TEST_LIST); \ done; -- 2.36.1

2 years, 10 months

2
1
0 0

[PATCH][next] KVM: selftests: Fix spelling mistake "miliseconds" -> "milliseconds"

by Colin Ian King

There is a spelling mistake in the -p option help text. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c b/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c index cc6421716400..58876ec4ee51 100644 --- a/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c +++ b/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c @@ -218,7 +218,7 @@ static void help(char *name) puts(""); printf("usage: %s [-h] [-p period_ms] [-t token]\n", name); puts(""); - printf(" -p: The NX reclaim period in miliseconds.\n"); + printf(" -p: The NX reclaim period in milliseconds.\n"); printf(" -t: The magic token to indicate environment setup is done.\n"); printf(" -r: The test has reboot permissions and can disable NX huge pages.\n"); puts(""); -- 2.35.3

2 years, 10 months

1
0
0 0

[Bug Report] - kselftest build fails if output directory is first level sub-directory

by Muhammad Usama Anjum

Hello, kselftest can be built using the kernel's top most Makefile without using kselftest's Makefile directly. But there is bug in the top most Makefile. The build fails if the specified output directory is first level sub-directory. Here is a example to reproduce this bug: make kselftest-all O=build "The Make is working in a wrong directory, that is why the relative path does not work." Masahiro Yamada. Feel free to fix it if someone pin the bug. It should be noted that the build works in some other combinations: make kselftest-all (works) make kselftest-all O=/tmp (works) make kselftest-all O=build/build2 (works) My unsuccessful attempt to fix this bug can be found here: https://lore.kernel.org/lkml/20220223191016.1658728-1-usama.anjum@collabora… Thanks, Muhammad Usama Anjum

2 years, 10 months

3
5
0 0

[PATCH v2] kunit: tool: refactor internal kconfig handling, allow overriding

by Daniel Latypov

Currently, you cannot ovewrwrite what's in your kunitconfig via --kconfig_add. Nor can you override something in a qemu_config via either means. This patch makes it so we have this level of priority * --kconfig_add * kunitconfig file (the default or the one from --kunitconfig) * qemu_config The rationale for this order is that the more "dynamic" sources of kconfig options should take priority. --kconfig_add is obviously the most dynamic. And for kunitconfig, users probably tweak the file manually or specify --kunitconfig more often than they delve into qemu_config python files. And internally, we convert the kconfigs from a python list into a set or dict fairly often. We should just use a dict internally. We exposed the set transform in the past since we didn't define __eq__, so also take the chance to shore up the kunit_kconfig.Kconfig interface. Example ======= Let's consider the unrealistic example where someone would want to disable CONFIG_KUNIT. I.e. they run $ ./tools/testing/kunit/kunit.py config --kconfig_add=CONFIG_KUNIT=n Before ------ We'd write the following > # CONFIG_KUNIT is not set > CONFIG_KUNIT_ALL_TESTS=y > CONFIG_KUNIT_TEST=y > CONFIG_KUNIT=y > CONFIG_KUNIT_EXAMPLE_TEST=y And we'd error out with > ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. > This is probably due to unsatisfied dependencies. > Missing: # CONFIG_KUNIT is not set After ----- We'd write the following > # CONFIG_KUNIT is not set > CONFIG_KUNIT_TEST=y > CONFIG_KUNIT_ALL_TESTS=y > CONFIG_KUNIT_EXAMPLE_TEST=y And we'd error out with > ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. > This is probably due to unsatisfied dependencies. > Missing: CONFIG_KUNIT_EXAMPLE_TEST=y, CONFIG_KUNIT_TEST=y, CONFIG_KUNIT_ALL_TESTS=y Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- v1 -> v2: fix validate_config() func. There was a bug found by David, see https://lore.kernel.org/linux-kselftest/CAGS_qxpF338dvbB+6QW1n8_agddeS10+nk… --- tools/testing/kunit/kunit_config.py | 49 +++++++++++++++----------- tools/testing/kunit/kunit_kernel.py | 18 +++++----- tools/testing/kunit/kunit_tool_test.py | 45 ++++++++++------------- 3 files changed, 57 insertions(+), 55 deletions(-) diff --git a/tools/testing/kunit/kunit_config.py b/tools/testing/kunit/kunit_config.py index 75a8dc1683d4..89443400b17e 100644 --- a/tools/testing/kunit/kunit_config.py +++ b/tools/testing/kunit/kunit_config.py @@ -8,7 +8,7 @@ from dataclasses import dataclass import re -from typing import List, Set +from typing import Dict, Iterable, Set CONFIG_IS_NOT_SET_PATTERN = r'^# CONFIG_(\w+) is not set$' CONFIG_PATTERN = r'^CONFIG_(\w+)=(\S+|".*")$' @@ -32,35 +32,46 @@ class Kconfig: """Represents defconfig or .config specified using the Kconfig language.""" def __init__(self) -> None: - self._entries = [] # type: List[KconfigEntry] + self._entries = {} # type: Dict[str, str] - def entries(self) -> Set[KconfigEntry]: - return set(self._entries) + def __eq__(self, other) -> bool: + if not isinstance(other, self.__class__): + return False + return self._entries == other._entries - def add_entry(self, entry: KconfigEntry) -> None: - self._entries.append(entry) + def __repr__(self) -> str: + return ','.join(str(e) for e in self._as_entries()) + + + def _as_entries(self) -> Iterable[KconfigEntry]: + for name, value in self._entries.items(): + yield KconfigEntry(name, value) + + def add_entry(self, name: str, value: str) -> None: + self._entries[name] = value def is_subset_of(self, other: 'Kconfig') -> bool: - other_dict = {e.name: e.value for e in other.entries()} - for a in self.entries(): - b = other_dict.get(a.name) + for name, value in self._entries.items(): + b = other._entries.get(name) if b is None: - if a.value == 'n': + if value == 'n': continue return False - if a.value != b: + if value != b: return False return True + def set_diff(self, other: 'Kconfig') -> Set[KconfigEntry]: + return set(self._as_entries()) - set(other._as_entries()) + def merge_in_entries(self, other: 'Kconfig') -> None: - if other.is_subset_of(self): - return - self._entries = list(self.entries().union(other.entries())) + for name, value in other._entries.items(): + self._entries[name] = value def write_to_file(self, path: str) -> None: with open(path, 'a+') as f: - for entry in self.entries(): - f.write(str(entry) + '\n') + for e in self._as_entries(): + f.write(str(e) + '\n') def parse_file(path: str) -> Kconfig: with open(path, 'r') as f: @@ -78,14 +89,12 @@ def parse_from_string(blob: str) -> Kconfig: match = config_matcher.match(line) if match: - entry = KconfigEntry(match.group(1), match.group(2)) - kconfig.add_entry(entry) + kconfig.add_entry(match.group(1), match.group(2)) continue empty_match = is_not_set_matcher.match(line) if empty_match: - entry = KconfigEntry(empty_match.group(1), 'n') - kconfig.add_entry(entry) + kconfig.add_entry(empty_match.group(1), 'n') continue if line[0] == '#': diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 3539efaf99ba..6d994bb24999 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -53,8 +53,8 @@ class LinuxSourceTreeOperations: except subprocess.CalledProcessError as e: raise ConfigError(e.output.decode()) - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> None: - pass + def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + return base_kunitconfig def make_allyesconfig(self, build_dir: str, make_options) -> None: raise ConfigError('Only the "um" arch is supported for alltests') @@ -109,9 +109,10 @@ class LinuxSourceTreeOperationsQemu(LinuxSourceTreeOperations): self._kernel_command_line = qemu_arch_params.kernel_command_line + ' kunit_shutdown=reboot' self._extra_qemu_params = qemu_arch_params.extra_qemu_params - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> None: + def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: kconfig = kunit_config.parse_from_string(self._kconfig) - base_kunitconfig.merge_in_entries(kconfig) + kconfig.merge_in_entries(base_kunitconfig) + return kconfig def start(self, params: List[str], build_dir: str) -> subprocess.Popen: kernel_path = os.path.join(build_dir, self._kernel_path) @@ -267,7 +268,7 @@ class LinuxSourceTree: validated_kconfig = kunit_config.parse_file(kconfig_path) if self._kconfig.is_subset_of(validated_kconfig): return True - invalid = self._kconfig.entries() - validated_kconfig.entries() + invalid = self._kconfig.set_diff(validated_kconfig) message = 'Not all Kconfig options selected in kunitconfig were in the generated .config.\n' \ 'This is probably due to unsatisfied dependencies.\n' \ 'Missing: ' + ', '.join([str(e) for e in invalid]) @@ -282,7 +283,7 @@ class LinuxSourceTree: if build_dir and not os.path.exists(build_dir): os.mkdir(build_dir) try: - self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) self._kconfig.write_to_file(kconfig_path) self._ops.make_olddefconfig(build_dir, make_options) except ConfigError as e: @@ -303,7 +304,7 @@ class LinuxSourceTree: return True old_kconfig = kunit_config.parse_file(old_path) - return old_kconfig.entries() != self._kconfig.entries() + return old_kconfig != self._kconfig def build_reconfig(self, build_dir: str, make_options) -> bool: """Creates a new .config if it is not a subset of the .kunitconfig.""" @@ -313,7 +314,8 @@ class LinuxSourceTree: return self.build_config(build_dir, make_options) existing_kconfig = kunit_config.parse_file(kconfig_path) - self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + if self._kconfig.is_subset_of(existing_kconfig) and not self._kunitconfig_changed(build_dir): return True print('Regenerating .config ...') diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 25a2eb3bf114..3a8f638ff092 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -45,7 +45,7 @@ class KconfigTest(unittest.TestCase): self.assertTrue(kconfig0.is_subset_of(kconfig0)) kconfig1 = kunit_config.Kconfig() - kconfig1.add_entry(kunit_config.KconfigEntry('TEST', 'y')) + kconfig1.add_entry('TEST', 'y') self.assertTrue(kconfig1.is_subset_of(kconfig1)) self.assertTrue(kconfig0.is_subset_of(kconfig1)) self.assertFalse(kconfig1.is_subset_of(kconfig0)) @@ -56,40 +56,28 @@ class KconfigTest(unittest.TestCase): kconfig = kunit_config.parse_file(kconfig_path) expected_kconfig = kunit_config.Kconfig() - expected_kconfig.add_entry( - kunit_config.KconfigEntry('UML', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('MMU', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('TEST', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('EXAMPLE_TEST', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('MK8', 'n')) - - self.assertEqual(kconfig.entries(), expected_kconfig.entries()) + expected_kconfig.add_entry('UML', 'y') + expected_kconfig.add_entry('MMU', 'y') + expected_kconfig.add_entry('TEST', 'y') + expected_kconfig.add_entry('EXAMPLE_TEST', 'y') + expected_kconfig.add_entry('MK8', 'n') + + self.assertEqual(kconfig, expected_kconfig) def test_write_to_file(self): kconfig_path = os.path.join(test_tmpdir, '.config') expected_kconfig = kunit_config.Kconfig() - expected_kconfig.add_entry( - kunit_config.KconfigEntry('UML', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('MMU', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('TEST', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('EXAMPLE_TEST', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('MK8', 'n')) + expected_kconfig.add_entry('UML', 'y') + expected_kconfig.add_entry('MMU', 'y') + expected_kconfig.add_entry('TEST', 'y') + expected_kconfig.add_entry('EXAMPLE_TEST', 'y') + expected_kconfig.add_entry('MK8', 'n') expected_kconfig.write_to_file(kconfig_path) actual_kconfig = kunit_config.parse_file(kconfig_path) - - self.assertEqual(actual_kconfig.entries(), - expected_kconfig.entries()) + self.assertEqual(actual_kconfig, expected_kconfig) class KUnitParserTest(unittest.TestCase): @@ -381,8 +369,11 @@ class LinuxSourceTreeTest(unittest.TestCase): kunit_kernel.LinuxSourceTree('', kunitconfig_path=dir) def test_kconfig_add(self): + want_kconfig = kunit_config.Kconfig() + want_kconfig.add_entry('NOT_REAL', 'y') + tree = kunit_kernel.LinuxSourceTree('', kconfig_add=['CONFIG_NOT_REAL=y']) - self.assertIn(kunit_config.KconfigEntry('NOT_REAL', 'y'), tree._kconfig.entries()) + self.assertFalse(want_kconfig.set_diff(tree._kconfig)) def test_invalid_arch(self): with self.assertRaisesRegex(kunit_kernel.ConfigError, 'not a valid arch, options are.*x86_64'): base-commit: 1b11063d32d7e11366e48be64215ff517ce32217 -- 2.36.1.124.g0e6072fb45-goog

2 years, 10 months

2
3
0 0

[PATCH v2] docs/kselftest: add more guidelines for adding new tests

by Muhammad Usama Anjum

Improve and add instructions to add new tests. Add build commands to test before sending the new test patch. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- Changes in v2: - Updated commit message - Removed dependence of this patch from other patch - Updated instructions --- Documentation/dev-tools/kselftest.rst | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index a833ecf12fbc1..ee6467ca8293f 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -208,6 +208,14 @@ In general, the rules for selftests are Contributing new tests (details) ================================ + * In your Makefile, use facilities from lib.mk by including it instead of + reinventing the wheel. Specify flags and binaries generation flags on + need basis before including lib.mk. :: + + CFLAGS = $(KHDR_INCLUDES) + TEST_GEN_PROGS := close_range_test + include ../lib.mk + * Use TEST_GEN_XXX if such binaries or files are generated during compiling. @@ -230,13 +238,30 @@ Contributing new tests (details) * First use the headers inside the kernel source and/or git repo, and then the system headers. Headers for the kernel release as opposed to headers installed by the distro on the system should be the primary focus to be able - to find regressions. + to find regressions. Use KHDR_INCLUDES in Makefile to include headers from + the kernel source. * If a test needs specific kernel config options enabled, add a config file in the test directory to enable them. e.g: tools/testing/selftests/android/config + * Create a .gitignore file inside test directory and add all generated objects + in it. + + * Add new test name in TARGETS in selftests/Makefile:: + + TARGETS += android + + * All changes should pass:: + + kselftest-{all,install,clean,gen_tar} + kselftest-{all,install,clean,gen_tar} O=abo_path + kselftest-{all,install,clean,gen_tar} O=rel_path + make -C tools/testing/selftests {all,install,clean,gen_tar} + make -C tools/testing/selftests {all,install,clean,gen_tar} O=abs_path + make -C tools/testing/selftests {all,install,clean,gen_tar} O=rel_path + Test Module =========== -- 2.30.2

2 years, 10 months

3
6
0 0

[PATCH] tc-testing: gitignore, delete plugins directory

by liujing

when we modfying kernel, commit it to our environment building. we find a error that is "tools/testing/selftests/tc-testing/plugins" failed: No such file or directory" we find plugins directory is ignored in "tools/testing/selftests/tc-testing/.gitignore", but the plugins directory is need in "tools/testing/selftests/tc-testing/Makefile" Signed-off-by: liujing <liujing(a)cmss.chinamobile.com> --- tools/testing/selftests/tc-testing/.gitignore | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/tc-testing/.gitignore b/tools/testing/selftests/tc-testing/.gitignore index d52f65de23b4..9fe1cef72728 100644 --- a/tools/testing/selftests/tc-testing/.gitignore +++ b/tools/testing/selftests/tc-testing/.gitignore @@ -1,7 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only __pycache__/ *.pyc -plugins/ *.xml *.tap tdc_config_local.py -- 2.18.2

2 years, 10 months

2
1
0 0

[PATCH v7 0/6] Proposal for a GPU cgroup controller

by T.J. Mercier

This patch series revisits the proposal for a GPU cgroup controller to track and limit memory allocations by various device/allocator subsystems. The patch series also contains a simple prototype to illustrate how Android intends to implement DMA-BUF allocator attribution using the GPU cgroup controller. The prototype does not include resource limit enforcements. Changelog: v7: Hide gpucg and gpucg_bucket struct definitions per Michal Koutný. This means gpucg_register_bucket now returns an internally allocated struct gpucg_bucket. Move all public function documentation to the cgroup_gpu.h header. Remove comment in documentation about duplicate name rejection which is not relevant to cgroups users per Michal Koutný. v6: Move documentation into cgroup-v2.rst per Tejun Heo. Rename BINDER_FD{A}_FLAG_SENDER_NO_NEED -> BINDER_FD{A}_FLAG_XFER_CHARGE per Carlos Llamas. Return error on transfer failure per Carlos Llamas. v5: Rebase on top of v5.18-rc3 Drop the global GPU cgroup "total" (sum of all device totals) portion of the design since there is no currently known use for this per Tejun Heo. Fix commit message which still contained the old name for dma_buf_transfer_charge per Michal Koutný. Remove all GPU cgroup code except what's necessary to support charge transfer from dma_buf. Previously charging was done in export, but for non-Android graphics use-cases this is not ideal since there may be a delay between allocation and export, during which time there is no accounting. Merge dmabuf: Use the GPU cgroup charge/uncharge APIs patch into dmabuf: heaps: export system_heap buffers with GPU cgroup charging as a result of above. Put the charge and uncharge code in the same file (system_heap_allocate, system_heap_dma_buf_release) instead of splitting them between the heap and the dma_buf_release. This avoids asymmetric management of the gpucg charges. Modify the dma_buf_transfer_charge API to accept a task_struct instead of a gpucg. This avoids requiring the caller to manage the refcount of the gpucg upon failure and confusing ownership transfer logic. Support all strings for gpucg_register_bucket instead of just string literals. Enforce globally unique gpucg_bucket names. Constrain gpucg_bucket name lengths to 64 bytes. Append "-heap" to gpucg_bucket names from dmabuf-heaps. Drop patch 7 from the series, which changed the types of binder_transaction_data's sender_pid and sender_euid fields. This was done in another commit here: https://lore.kernel.org/all/20220210021129.3386083-4-masahiroy@kernel.org/ Rename: gpucg_try_charge -> gpucg_charge find_cg_rpool_locked -> cg_rpool_find_locked init_cg_rpool -> cg_rpool_init get_cg_rpool_locked -> cg_rpool_get_locked "gpu cgroup controller" -> "GPU controller" gpucg_device -> gpucg_bucket usage -> size Tests: Support both binder_fd_array_object and binder_fd_object. This is necessary because new versions of Android will use binder_fd_object instead of binder_fd_array_object, and we need to support both. Tests for both binder_fd_array_object and binder_fd_object. For binder_utils return error codes instead of struct binder{fs}_ctx. Use ifdef __ANDROID__ to choose platform-dependent temp path instead of a runtime fallback. Ensure binderfs_mntpt ends with a trailing '/' character instead of prepending it where used. v4: Skip test if not run as root per Shuah Khan Add better test logging for abnormal child termination per Shuah Khan Adjust ordering of charge/uncharge during transfer to avoid potentially hitting cgroup limit per Michal Koutný Adjust gpucg_try_charge critical section for charge transfer functionality Fix uninitialized return code error for dmabuf_try_charge error case v3: Remove Upstreaming Plan from gpu-cgroup.rst per John Stultz Use more common dual author commit message format per John Stultz Remove android from binder changes title per Todd Kjos Add a kselftest for this new behavior per Greg Kroah-Hartman Include details on behavior for all combinations of kernel/userspace versions in changelog (thanks Suren Baghdasaryan) per Greg Kroah-Hartman. Fix pid and uid types in binder UAPI header v2: See the previous revision of this change submitted by Hridya Valsaraju at: https://lore.kernel.org/all/20220115010622.3185921-1-hridya@google.com/ Move dma-buf cgroup charge transfer from a dma_buf_op defined by every heap to a single dma-buf function for all heaps per Daniel Vetter and Christian König. Pointers to struct gpucg and struct gpucg_device tracking the current associations were added to the dma_buf struct to achieve this. Fix incorrect Kconfig help section indentation per Randy Dunlap. History of the GPU cgroup controller ==================================== The GPU/DRM cgroup controller came into being when a consensus[1] was reached that the resources it tracked were unsuitable to be integrated into memcg. Originally, the proposed controller was specific to the DRM subsystem and was intended to track GEM buffers and GPU-specific resources[2]. In order to help establish a unified memory accounting model for all GPU and all related subsystems, Daniel Vetter put forth a suggestion to move it out of the DRM subsystem so that it can be used by other DMA-BUF exporters as well[3]. This RFC proposes an interface that does the same. [1]: https://patchwork.kernel.org/project/dri-devel/cover/20190501140438.9506-1-… [2]: https://lore.kernel.org/amd-gfx/20210126214626.16260-1-brian.welty@intel.co… [3]: https://lore.kernel.org/amd-gfx/YCVOl8%2F87bqRSQei@phenom.ffwll.local/ Hridya Valsaraju (3): gpu: rfc: Proposal for a GPU cgroup controller cgroup: gpu: Add a cgroup controller for allocator attribution of GPU memory binder: Add flags to relinquish ownership of fds T.J. Mercier (3): dmabuf: heaps: export system_heap buffers with GPU cgroup charging dmabuf: Add gpu cgroup charge transfer function selftests: Add binder cgroup gpu memory transfer tests Documentation/admin-guide/cgroup-v2.rst | 23 + drivers/android/binder.c | 31 +- drivers/dma-buf/dma-buf.c | 80 ++- drivers/dma-buf/dma-heap.c | 38 ++ drivers/dma-buf/heaps/system_heap.c | 28 +- include/linux/cgroup_gpu.h | 146 +++++ include/linux/cgroup_subsys.h | 4 + include/linux/dma-buf.h | 49 +- include/linux/dma-heap.h | 15 + include/uapi/linux/android/binder.h | 23 +- init/Kconfig | 7 + kernel/cgroup/Makefile | 1 + kernel/cgroup/gpu.c | 390 +++++++++++++ .../selftests/drivers/android/binder/Makefile | 8 + .../drivers/android/binder/binder_util.c | 250 +++++++++ .../drivers/android/binder/binder_util.h | 32 ++ .../selftests/drivers/android/binder/config | 4 + .../binder/test_dmabuf_cgroup_transfer.c | 526 ++++++++++++++++++ 18 files changed, 1632 insertions(+), 23 deletions(-) create mode 100644 include/linux/cgroup_gpu.h create mode 100644 kernel/cgroup/gpu.c create mode 100644 tools/testing/selftests/drivers/android/binder/Makefile create mode 100644 tools/testing/selftests/drivers/android/binder/binder_util.c create mode 100644 tools/testing/selftests/drivers/android/binder/binder_util.h create mode 100644 tools/testing/selftests/drivers/android/binder/config create mode 100644 tools/testing/selftests/drivers/android/binder/test_dmabuf_cgroup_transfer.c -- 2.36.0.512.ge40c2bad7a-goog

2 years, 10 months

7
19
0 0

[PATCH v5 0/5] bpf: Add bpf_verify_pkcs7_signature() helper

by Roberto Sassu

One of the desirable features in security is the ability to restrict import of data to a given system based on data authenticity. If data import can be restricted, it would be possible to enforce a system-wide policy based on the signing keys the system owner trusts. This feature is widely used in the kernel. For example, if the restriction is enabled, kernel modules can be plugged in only if they are signed with a key whose public part is in the primary or secondary keyring. For eBPF, it can be useful as well. For example, it might be useful to authenticate data an eBPF program makes security decisions on. After a discussion in the eBPF mailing list, it was decided that the stated goal should be accomplished by introducing a new helper: bpf_verify_pkcs7_signature(), dedicated to verify PKCS#7 signatures. More helpers will be introduced later, as necessary. The job of bpf_verify_pkcs7_signature() is simply to call the corresponding signature verification function verify_pkcs7_signature(). Data and signature can be provided to the new helper with two dynamic pointers, to reduce the number of parameters. The keyring can be provided from its serial number, with the new helper bpf_lookup_user_key(). Since it acquires a reference of the found key, the corresponding release helper bpf_key_put() has been introduced to decrement the reference count. The eBPF verifier has been enhanced to ensure that the key reference count is always decreased, when incremented, or otherwise it refuses to load the program. This ability is being verified with the lookup_user_key_norelease test. While the new helpers provide great flexibility, they seem to be suboptimal in terms of security guarantees. If the goal is to do signature verification with system-provided keys (e.g. from the built-in keyring), the eBPF program would have to rely on the user space counterpart to search the correct keyring and to pass its serial. If only the eBPF program is signed and verified, there is not certainty that this operation is done correctly by unverified code. Instead, since verify_pkcs7_signature() understands a pre-determined set of struct key pointer values, which translates into the corresponding system keyrings, the keyring ID parameter has been added as well to the eBPF helper. It is considered only if the passed struct key pointer is NULL. That would guaranteed, assuming that the keyring ID is hardcoded, that signature verification is always done with the desired keys. The introduced helpers can be called only from sleepable programs, because of memory allocation (with key flag KEY_LOOKUP_CREATE) and crypto operations. For example, the lsm.s/bpf attach point is suitable, fexit/array_map_update_elem is not. A test was added to check the ability of bpf_verify_pkcs7_signature() to verify PKCS#7 signatures from the session keyring, a newly-created keyring, and from the secondary keyring (taking an existing kernel module for the verification). The test does not fail if a suitable kernel module is not found (needs support from the CI). The patch set is organized as follows. Patch 1 exports bpf_dynptr_get_size(), to obtain the real size of data carried by a dynamic pointer. Patch 2 introduces the bpf_lookup_user_key() and bpf_key_put() helpers. Patch 3 introduces the bpf_verify_pkcs7_signature() helper. Patches 4 and 5 respectively add the test for the first and the last helper. Changelog v4: - Remove bpf_request_key_by_id(), don't return an invalid pointer that other helpers can use - Pass the keyring ID (without ULONG_MAX, suggested by Alexei) to bpf_verify_pkcs7_signature() - Introduce bpf_lookup_user_key() and bpf_key_put() helpers (suggested by Alexei) - Add lookup_key_norelease test, to ensure that the verifier blocks eBPF programs which don't decrement the key reference count - Parse raw PKCS#7 signature instead of module-style signature in the verify_pkcs7_signature test (suggested by Alexei) - Parse kernel module in user space and pass raw PKCS#7 signature to the eBPF program for signature verification v3: - Rename bpf_verify_signature() back to bpf_verify_pkcs7_signature() to avoid managing different parameters for each signature verification function in one helper (suggested by Daniel) - Use dynamic pointers and export bpf_dynptr_get_size() (suggested by Alexei) - Introduce bpf_request_key_by_id() to give more flexibility to the caller of bpf_verify_pkcs7_signature() to retrieve the appropriate keyring (suggested by Alexei) - Fix test by reordering the gcc command line, always compile sign-file - Improve helper support check mechanism in the test v2: - Rename bpf_verify_pkcs7_signature() to a more generic bpf_verify_signature() and pass the signature type (suggested by KP) - Move the helper and prototype declaration under #ifdef so that user space can probe for support for the helper (suggested by Daniel) - Describe better the keyring types (suggested by Daniel) - Include linux/bpf.h instead of vmlinux.h to avoid implicit or redeclaration - Make the test selfcontained (suggested by Alexei) v1: - Don't define new map flag but introduce simple wrapper of verify_pkcs7_signature() (suggested by Alexei and KP) Roberto Sassu (5): bpf: Export bpf_dynptr_get_size() bpf: Add bpf_lookup_user_key() and bpf_key_put() helpers bpf: Add bpf_verify_pkcs7_signature() helper selftests/bpf: Add test for unreleased key references selftests/bpf: Add test for bpf_verify_pkcs7_signature() helper include/linux/bpf.h | 1 + include/uapi/linux/bpf.h | 33 ++ kernel/bpf/bpf_lsm.c | 85 +++++ kernel/bpf/helpers.c | 2 +- kernel/bpf/verifier.c | 6 +- scripts/bpf_doc.py | 2 + tools/include/uapi/linux/bpf.h | 33 ++ tools/testing/selftests/bpf/Makefile | 14 +- tools/testing/selftests/bpf/config | 2 + .../prog_tests/lookup_user_key_norelease.c | 52 +++ .../bpf/prog_tests/verify_pkcs7_sig.c | 341 ++++++++++++++++++ .../progs/test_lookup_user_key_norelease.c | 24 ++ .../bpf/progs/test_verify_pkcs7_sig.c | 90 +++++ .../testing/selftests/bpf/verify_sig_setup.sh | 104 ++++++ 14 files changed, 783 insertions(+), 6 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/lookup_user_key_norelease.c create mode 100644 tools/testing/selftests/bpf/prog_tests/verify_pkcs7_sig.c create mode 100644 tools/testing/selftests/bpf/progs/test_lookup_user_key_norelease.c create mode 100644 tools/testing/selftests/bpf/progs/test_verify_pkcs7_sig.c create mode 100755 tools/testing/selftests/bpf/verify_sig_setup.sh -- 2.25.1

2 years, 10 months

3
21
0 0

[PATCH 1/2] kunit: tool: make --kunitconfig repeatable, blindly concat

by Daniel Latypov

It's come up a few times that it would be useful to have --kunitconfig be repeatable [1][2]. This could be done before with a bit of shell-fu, e.g. $ find fs/ -name '.kunitconfig' -exec cat {} + | \ ./tools/testing/kunit/kunit.py run --kunitconfig=/dev/stdin or equivalently: $ cat fs/ext4/.kunitconfig fs/fat/.kunitconfig | \ ./tools/testing/kunit/kunit.py run --kunitconfig=/dev/stdin But this can be fairly clunky to use in practice. And having explicit support in kunit.py opens the door to having more config fragments of interest, e.g. options for PCI on UML [1], UML coverage [2], variants of tests [3]. There's another argument to be made that users can just use multiple --kconfig_add's, but this gets very clunky very fast (e.g. [2]). Note: there's a big caveat here that some kconfig options might be incompatible. We try to give a clearish error message in the simple case where the same option appears multiple times with conflicting values, but more subtle ones (e.g. mutually exclusive options) will be potentially very confusing for the user. I don't know we can do better. Note 2: if you want to combine a --kunitconfig with the default, you either have to do to specify the current build_dir > --kunitconfig=.kunit --kunitconfig=additional.config or > --kunitconfig=tools/testing/kunit/configs/default.config --kunitconifg=additional.config each of which have their downsides (former depends on --build_dir, doesn't work if you don't have a .kunitconfig yet), etc. Example with conflicting values: > $ ./tools/testing/kunit/kunit.py config --kunitconfig=lib/kunit --kunitconfig=/dev/stdin <<EOF > CONFIG_KUNIT_TEST=n > CONFIG_KUNIT=m > EOF > ... > kunit_kernel.ConfigError: Multiple values specified for 2 options in kunitconfig: > CONFIG_KUNIT=y > vs from /dev/stdin > CONFIG_KUNIT=m > > CONFIG_KUNIT_TEST=y > vs from /dev/stdin > # CONFIG_KUNIT_TEST is not set [1] https://lists.freedesktop.org/archives/dri-devel/2022-June/357616.html [2] https://lore.kernel.org/linux-kselftest/CAFd5g45f3X3xF2vz2BkTHRqOC4uW6GZxtU… [3] https://lore.kernel.org/linux-kselftest/CANpmjNOdSy6DuO6CYZ4UxhGxqhjzx4tn0s… Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- NOTE: this series is based on https://lore.kernel.org/linux-kselftest/20220520224200.3764027-1-dlatypov@g… That patch redoes kunitconfig parsing, so we'd have merge conflicts either way we order these. --- tools/testing/kunit/kunit.py | 13 ++++--- tools/testing/kunit/kunit_config.py | 11 +++++- tools/testing/kunit/kunit_kernel.py | 38 ++++++++++++------ tools/testing/kunit/kunit_tool_test.py | 54 +++++++++++++++++++++++--- 4 files changed, 91 insertions(+), 25 deletions(-) diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py index 13bd72e47da8..163f6b8ac464 100755 --- a/tools/testing/kunit/kunit.py +++ b/tools/testing/kunit/kunit.py @@ -291,8 +291,9 @@ def add_common_opts(parser) -> None: parser.add_argument('--kunitconfig', help='Path to Kconfig fragment that enables KUnit tests.' ' If given a directory, (e.g. lib/kunit), "/.kunitconfig" ' - 'will get automatically appended.', - metavar='PATH') + 'will get automatically appended. If repeated, the files ' + 'blindly concatenated, which might not work in all cases.', + action='append', metavar='PATHS') parser.add_argument('--kconfig_add', help='Additional Kconfig options to append to the ' '.kunitconfig, e.g. CONFIG_KASAN=y. Can be repeated.', @@ -414,7 +415,7 @@ def main(argv, linux=None): if not linux: linux = kunit_kernel.LinuxSourceTree(cli_args.build_dir, - kunitconfig_path=cli_args.kunitconfig, + kunitconfig_paths=cli_args.kunitconfig, kconfig_add=cli_args.kconfig_add, arch=cli_args.arch, cross_compile=cli_args.cross_compile, @@ -440,7 +441,7 @@ def main(argv, linux=None): if not linux: linux = kunit_kernel.LinuxSourceTree(cli_args.build_dir, - kunitconfig_path=cli_args.kunitconfig, + kunitconfig_paths=cli_args.kunitconfig, kconfig_add=cli_args.kconfig_add, arch=cli_args.arch, cross_compile=cli_args.cross_compile, @@ -457,7 +458,7 @@ def main(argv, linux=None): elif cli_args.subcommand == 'build': if not linux: linux = kunit_kernel.LinuxSourceTree(cli_args.build_dir, - kunitconfig_path=cli_args.kunitconfig, + kunitconfig_paths=cli_args.kunitconfig, kconfig_add=cli_args.kconfig_add, arch=cli_args.arch, cross_compile=cli_args.cross_compile, @@ -476,7 +477,7 @@ def main(argv, linux=None): elif cli_args.subcommand == 'exec': if not linux: linux = kunit_kernel.LinuxSourceTree(cli_args.build_dir, - kunitconfig_path=cli_args.kunitconfig, + kunitconfig_paths=cli_args.kunitconfig, kconfig_add=cli_args.kconfig_add, arch=cli_args.arch, cross_compile=cli_args.cross_compile, diff --git a/tools/testing/kunit/kunit_config.py b/tools/testing/kunit/kunit_config.py index 89443400b17e..05b129030c6e 100644 --- a/tools/testing/kunit/kunit_config.py +++ b/tools/testing/kunit/kunit_config.py @@ -8,7 +8,7 @@ from dataclasses import dataclass import re -from typing import Dict, Iterable, Set +from typing import Dict, Iterable, List, Set, Tuple CONFIG_IS_NOT_SET_PATTERN = r'^# CONFIG_(\w+) is not set$' CONFIG_PATTERN = r'^CONFIG_(\w+)=(\S+|".*")$' @@ -64,6 +64,15 @@ class Kconfig: def set_diff(self, other: 'Kconfig') -> Set[KconfigEntry]: return set(self._as_entries()) - set(other._as_entries()) + def differing_options(self, other: 'Kconfig') -> List[Tuple[KconfigEntry, KconfigEntry]]: + diff = [] # type: List[Tuple[KconfigEntry, KconfigEntry]] + for name, value in self._entries.items(): + b = other._entries.get(name) + if b and value != b: + pair = (KconfigEntry(name, value), KconfigEntry(name, b)) + diff.append(pair) + return diff + def merge_in_entries(self, other: 'Kconfig') -> None: for name, value in other._entries.items(): self._entries[name] = value diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 6d994bb24999..fc415ff7530e 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -176,6 +176,30 @@ def get_kunitconfig_path(build_dir: str) -> str: def get_old_kunitconfig_path(build_dir: str) -> str: return os.path.join(build_dir, OLD_KUNITCONFIG_PATH) +def get_parsed_kunitconfig(build_dir: str, + kunitconfig_paths: Optional[List[str]]=None) -> kunit_config.Kconfig: + if not kunitconfig_paths: + path = get_kunitconfig_path(build_dir) + if not os.path.exists(path): + shutil.copyfile(DEFAULT_KUNITCONFIG_PATH, path) + return kunit_config.parse_file(path) + + merged = kunit_config.Kconfig() + + for path in kunitconfig_paths: + if os.path.isdir(path): + path = os.path.join(path, KUNITCONFIG_PATH) + if not os.path.exists(path): + raise ConfigError(f'Specified kunitconfig ({path}) does not exist') + + partial = kunit_config.parse_file(path) + diff = merged.differing_options(partial) + if diff: + diff_str = '\n\n'.join(f'{a}\n vs from {path}\n{b}' for a, b in diff) + raise ConfigError(f'Multiple values specified for {len(diff)} options in kunitconfig:\n{diff_str}') + merged.merge_in_entries(partial) + return merged + def get_outfile_path(build_dir: str) -> str: return os.path.join(build_dir, OUTFILE_PATH) @@ -221,7 +245,7 @@ class LinuxSourceTree: self, build_dir: str, load_config=True, - kunitconfig_path='', + kunitconfig_paths: Optional[List[str]]=None, kconfig_add: Optional[List[str]]=None, arch=None, cross_compile=None, @@ -237,17 +261,7 @@ class LinuxSourceTree: if not load_config: return - if kunitconfig_path: - if os.path.isdir(kunitconfig_path): - kunitconfig_path = os.path.join(kunitconfig_path, KUNITCONFIG_PATH) - if not os.path.exists(kunitconfig_path): - raise ConfigError(f'Specified kunitconfig ({kunitconfig_path}) does not exist') - else: - kunitconfig_path = get_kunitconfig_path(build_dir) - if not os.path.exists(kunitconfig_path): - shutil.copyfile(DEFAULT_KUNITCONFIG_PATH, kunitconfig_path) - - self._kconfig = kunit_config.parse_file(kunitconfig_path) + self._kconfig = get_parsed_kunitconfig(build_dir, kunitconfig_paths) if kconfig_add: kconfig = kunit_config.parse_from_string('\n'.join(kconfig_add)) self._kconfig.merge_in_entries(kconfig) diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 3a8f638ff092..e21ae1331350 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -356,17 +356,46 @@ class LinuxSourceTreeTest(unittest.TestCase): def test_invalid_kunitconfig(self): with self.assertRaisesRegex(kunit_kernel.ConfigError, 'nonexistent.* does not exist'): - kunit_kernel.LinuxSourceTree('', kunitconfig_path='/nonexistent_file') + kunit_kernel.LinuxSourceTree('', kunitconfig_paths=['/nonexistent_file']) def test_valid_kunitconfig(self): with tempfile.NamedTemporaryFile('wt') as kunitconfig: - kunit_kernel.LinuxSourceTree('', kunitconfig_path=kunitconfig.name) + kunit_kernel.LinuxSourceTree('', kunitconfig_paths=[kunitconfig.name]) def test_dir_kunitconfig(self): with tempfile.TemporaryDirectory('') as dir: with open(os.path.join(dir, '.kunitconfig'), 'w'): pass - kunit_kernel.LinuxSourceTree('', kunitconfig_path=dir) + kunit_kernel.LinuxSourceTree('', kunitconfig_paths=[dir]) + + def test_multiple_kunitconfig(self): + want_kconfig = kunit_config.Kconfig() + want_kconfig.add_entry('KUNIT', 'y') + want_kconfig.add_entry('KUNIT_TEST', 'm') + + with tempfile.TemporaryDirectory('') as dir: + other = os.path.join(dir, 'otherkunitconfig') + with open(os.path.join(dir, '.kunitconfig'), 'w') as f: + f.write('CONFIG_KUNIT=y') + with open(other, 'w') as f: + f.write('CONFIG_KUNIT_TEST=m') + pass + + tree = kunit_kernel.LinuxSourceTree('', kunitconfig_paths=[dir, other]) + self.assertFalse(want_kconfig.set_diff(tree._kconfig)) + + + def test_multiple_kunitconfig_invalid(self): + with tempfile.TemporaryDirectory('') as dir: + other = os.path.join(dir, 'otherkunitconfig') + with open(os.path.join(dir, '.kunitconfig'), 'w') as f: + f.write('CONFIG_KUNIT=y') + with open(other, 'w') as f: + f.write('CONFIG_KUNIT=m') + + with self.assertRaisesRegex(kunit_kernel.ConfigError, '(?s)Multiple values.*CONFIG_KUNIT'): + kunit_kernel.LinuxSourceTree('', kunitconfig_paths=[dir, other]) + def test_kconfig_add(self): want_kconfig = kunit_config.Kconfig() @@ -637,7 +666,7 @@ class KUnitMainTest(unittest.TestCase): kunit.main(['run', '--kunitconfig=mykunitconfig']) # Just verify that we parsed and initialized it correctly here. mock_linux_init.assert_called_once_with('.kunit', - kunitconfig_path='mykunitconfig', + kunitconfig_paths=['mykunitconfig'], kconfig_add=None, arch='um', cross_compile=None, @@ -649,19 +678,32 @@ class KUnitMainTest(unittest.TestCase): kunit.main(['config', '--kunitconfig=mykunitconfig']) # Just verify that we parsed and initialized it correctly here. mock_linux_init.assert_called_once_with('.kunit', - kunitconfig_path='mykunitconfig', + kunitconfig_paths=['mykunitconfig'], kconfig_add=None, arch='um', cross_compile=None, qemu_config_path=None) + @mock.patch.object(kunit_kernel, 'LinuxSourceTree') + def test_run_multiple_kunitconfig(self, mock_linux_init): + mock_linux_init.return_value = self.linux_source_mock + kunit.main(['run', '--kunitconfig=mykunitconfig', '--kunitconfig=other']) + # Just verify that we parsed and initialized it correctly here. + mock_linux_init.assert_called_once_with('.kunit', + kunitconfig_paths=['mykunitconfig', 'other'], + kconfig_add=None, + arch='um', + cross_compile=None, + qemu_config_path=None) + + @mock.patch.object(kunit_kernel, 'LinuxSourceTree') def test_run_kconfig_add(self, mock_linux_init): mock_linux_init.return_value = self.linux_source_mock kunit.main(['run', '--kconfig_add=CONFIG_KASAN=y', '--kconfig_add=CONFIG_KCSAN=y']) # Just verify that we parsed and initialized it correctly here. mock_linux_init.assert_called_once_with('.kunit', - kunitconfig_path=None, + kunitconfig_paths=None, kconfig_add=['CONFIG_KASAN=y', 'CONFIG_KCSAN=y'], arch='um', cross_compile=None, -- 2.37.0.rc0.104.g0611611a94-goog

2 years, 10 months

3
5
0 0

[RFC PATCH 0/2] efi: get rid of deprecated sysfs varstore interface

by Ard Biesheuvel

EFI still has two ways of exposing EFI variable to user space: the original sysfs interface and the efivarfs pseudo-filesystem that supersedes it, and which was introduced almost 10 years ago. As a preparatory step towards refactoring the underlying infrastructure shared between efivarfs and efi-pstore, I would like to finally get rid of the sysfs interface which also uses that, but which is only enabled on x86 and Itanium. Cc: Matthew Garrett <mjg59(a)srcf.ucam.org> Cc: Peter Jones <pjones(a)redhat.com> Cc: Tony Luck <tony.luck(a)intel.com> Cc: Kees Cook <keescook(a)chromium.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Borislav Petkov <bp(a)alien8.de> Cc: Dave Hansen <dave.hansen(a)linux.intel.com> Cc: linux-kselftest(a)vger.kernel.org Ard Biesheuvel (2): selftests/kexec: remove broken EFI_VARS secure boot fallback check efi: remove deprecated 'efivars' sysfs interface Documentation/x86/x86_64/uefi.rst | 2 +- arch/arm/configs/milbeaut_m10v_defconfig | 1 - arch/ia64/configs/bigsur_defconfig | 1 - arch/ia64/configs/generic_defconfig | 1 - arch/ia64/configs/gensparse_defconfig | 1 - arch/ia64/configs/tiger_defconfig | 1 - arch/ia64/configs/zx1_defconfig | 1 - arch/x86/configs/i386_defconfig | 1 - arch/x86/configs/x86_64_defconfig | 1 - drivers/firmware/efi/Kconfig | 12 - drivers/firmware/efi/Makefile | 1 - drivers/firmware/efi/efivars.c | 671 -------------------- tools/testing/selftests/kexec/kexec_common_lib.sh | 36 +- 13 files changed, 3 insertions(+), 727 deletions(-) delete mode 100644 drivers/firmware/efi/efivars.c -- 2.35.1

2 years, 10 months

3
6
0 0

[PATCH v2] KVM: selftest: Enhance handling WRMSR ICR register in x2APIC mode

by Zeng Guang

Hardware would directly write x2APIC ICR register instead of software emulation in some circumstances, e.g when Intel IPI virtualization is enabled. This behavior requires normal reserved bits checking to ensure them input as zero, otherwise it will cause #GP. So we need mask out those reserved bits from the data written to vICR register. Remove Delivery Status bit emulation in test case as this flag is invalid and not needed in x2APIC mode. KVM may ignore clearing it during interrupt dispatch which will lead to fake test failure. Opportunstically correct vector number for test sending IPI to non-existent vCPUs. Signed-off-by: Zeng Guang <guang.zeng(a)intel.com> --- .../selftests/kvm/x86_64/xapic_state_test.c | 20 ++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/kvm/x86_64/xapic_state_test.c b/tools/testing/selftests/kvm/x86_64/xapic_state_test.c index 0792334ba243..df916c6f53f9 100644 --- a/tools/testing/selftests/kvm/x86_64/xapic_state_test.c +++ b/tools/testing/selftests/kvm/x86_64/xapic_state_test.c @@ -70,13 +70,27 @@ static void ____test_icr(struct kvm_vm *vm, struct kvm_vcpu *vcpu, uint64_t val) vcpu_ioctl(vm, vcpu->id, KVM_GET_LAPIC, &xapic); icr = (u64)(*((u32 *)&xapic.regs[APIC_ICR])) | (u64)(*((u32 *)&xapic.regs[APIC_ICR2])) << 32; - if (!vcpu->is_x2apic) + if (!vcpu->is_x2apic) { val &= (-1u | (0xffull << (32 + 24))); - ASSERT_EQ(icr, val & ~APIC_ICR_BUSY); + ASSERT_EQ(icr, val & ~APIC_ICR_BUSY); + } else { + ASSERT_EQ(icr & ~APIC_ICR_BUSY, val & ~APIC_ICR_BUSY); + } } +#define X2APIC_RSVED_BITS_MASK (GENMASK_ULL(31,20) | \ + GENMASK_ULL(17,16) | \ + GENMASK_ULL(13,13)) + static void __test_icr(struct kvm_vm *vm, struct kvm_vcpu *vcpu, uint64_t val) { + if (vcpu->is_x2apic) { + /* Hardware writing vICR register requires reserved bits 31:20, + * 17:16 and 13 kept as zero to avoid #GP exception. Data value + * written to vICR should mask out those bits above. + */ + val &= ~X2APIC_RSVED_BITS_MASK; + } ____test_icr(vm, vcpu, val | APIC_ICR_BUSY); ____test_icr(vm, vcpu, val & ~(u64)APIC_ICR_BUSY); } @@ -100,7 +114,7 @@ static void test_icr(struct kvm_vm *vm, struct kvm_vcpu *vcpu) icr = APIC_INT_ASSERT | 0xff; for (i = vcpu->id + 1; i < 0xff; i++) { for (j = 0; j < 8; j++) - __test_icr(vm, vcpu, i << (32 + 24) | APIC_INT_ASSERT | (j << 8)); + __test_icr(vm, vcpu, i << (32 + 24) | icr | (j << 8)); } /* And again with a shorthand destination for all types of IPIs. */ -- 2.27.0

2 years, 10 months

4
6
0 0

[RFC PATCH] kunit: tool: Enable virtio/PCI by default on UML

by David Gow

There are several tests which depend on PCI, and hence need a bunch of extra options to run under UML. This makes it awkward to give configuration instructions (whether in documentation, or as part of a .kunitconfig file), as two separate, incompatible sets of config options are required for UML and "most other architectures". For non-UML architectures, it's possible to add default kconfig options via the qemu_config python files, but there's no equivalent for UML. Add a new tools/testing/kunit/configs/arch_uml.config file containing extra kconfig options to use on UML. Signed-off-by: David Gow <davidgow(a)google.com> --- It's really ugly to have to type: --kconfig_add CONFIG_VIRTIO_UML=y --kconfig_add CONFIG_UML_PCI_OVER_VIRTIO=y when running many tests under UML, particularly since it isn't required on other architectures. This came up in discussion with Daniel this morning, and while the ability to repeat the --kunitconfig flag would go some way to alleviate this, having to add: --kunitconfig ./tools/testing/kunit/config/uml_pci.kunitconfig isn't all that much better. So it seems like adding something by default would be nice. This implementation is not perfect (in particular, there's no easy way of _disabling_ these options now, though [1] probably will help). The 'arch_uml.config' filename can be bikeshedded, too. Thoughts? --- tools/testing/kunit/configs/arch_uml.config | 5 +++++ tools/testing/kunit/kunit_kernel.py | 11 ++++++++--- 2 files changed, 13 insertions(+), 3 deletions(-) create mode 100644 tools/testing/kunit/configs/arch_uml.config diff --git a/tools/testing/kunit/configs/arch_uml.config b/tools/testing/kunit/configs/arch_uml.config new file mode 100644 index 000000000000..e824ce43b05a --- /dev/null +++ b/tools/testing/kunit/configs/arch_uml.config @@ -0,0 +1,5 @@ +# Config options which are added to UML builds by default + +# Enable virtio/pci, as a lot of tests require it. +CONFIG_VIRTIO_UML=y +CONFIG_UML_PCI_OVER_VIRTIO=y diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 3539efaf99ba..05e7b1e188d7 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -26,6 +26,7 @@ KUNITCONFIG_PATH = '.kunitconfig' OLD_KUNITCONFIG_PATH = 'last_used_kunitconfig' DEFAULT_KUNITCONFIG_PATH = 'tools/testing/kunit/configs/default.config' BROKEN_ALLCONFIG_PATH = 'tools/testing/kunit/configs/broken_on_uml.config' +UML_KCONFIG_PATH = 'tools/testing/kunit/configs/arch_uml.config' OUTFILE_PATH = 'test.log' ABS_TOOL_PATH = os.path.abspath(os.path.dirname(__file__)) QEMU_CONFIGS_DIR = os.path.join(ABS_TOOL_PATH, 'qemu_configs') @@ -53,7 +54,7 @@ class LinuxSourceTreeOperations: except subprocess.CalledProcessError as e: raise ConfigError(e.output.decode()) - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> None: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> None: pass def make_allyesconfig(self, build_dir: str, make_options) -> None: @@ -109,7 +110,7 @@ class LinuxSourceTreeOperationsQemu(LinuxSourceTreeOperations): self._kernel_command_line = qemu_arch_params.kernel_command_line + ' kunit_shutdown=reboot' self._extra_qemu_params = qemu_arch_params.extra_qemu_params - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> None: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> None: kconfig = kunit_config.parse_from_string(self._kconfig) base_kunitconfig.merge_in_entries(kconfig) @@ -137,6 +138,10 @@ class LinuxSourceTreeOperationsUml(LinuxSourceTreeOperations): def __init__(self, cross_compile=None): super().__init__(linux_arch='um', cross_compile=cross_compile) + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> None: + kconfig = kunit_config.parse_file(UML_KCONFIG_PATH) + base_kunitconfig.merge_in_entries(kconfig) + def make_allyesconfig(self, build_dir: str, make_options) -> None: kunit_parser.print_with_timestamp( 'Enabling all CONFIGs for UML...') @@ -313,7 +318,7 @@ class LinuxSourceTree: return self.build_config(build_dir, make_options) existing_kconfig = kunit_config.parse_file(kconfig_path) - self._ops.make_arch_qemuconfig(self._kconfig) + self._ops.make_arch_config(self._kconfig) if self._kconfig.is_subset_of(existing_kconfig) and not self._kunitconfig_changed(build_dir): return True print('Regenerating .config ...') -- 2.37.0.rc0.104.g0611611a94-goog

2 years, 10 months

3
2
0 0

[PATCH v2 0/5] Rework KUnit test execution in modules

by David Gow

This patch series makes two changes to how KUnit test suites are stored and executed: - The .kunit_test_suites section is now used for tests in modules (in lieu of a module_init funciton), as well as for built-in tests. The module loader will now trigger test execution. This frees up the module_init function for other uses. - Instead of storing an array of arrays of suites, have the kunit_test_suite() and kunit_test_suites() macros append to one global (or per-module) list of test suites. This removes a needless layer of indirection, and removes the need to NULL-terminate suite_sets. The upshot of this is that it should now be possible to use the kunit_test_suite() and kunit_test_suites() macros to register test suites even from within modules which otherwise had module_init functions. This was proving to be quite a common issue, resulting in several modules calling into KUnit's private suite execution functions to run their tests (often introducing incompatibilities with the KUnit tooling). This series also fixes the thunderbolt, nitro_enclaves, and sdhci-of-aspeed tests to use kunit_test_suite() now that it works. This is required, as otherwise the first two patches may break these tests entirely. Huge thanks to Jeremy Kerr, who designed and implemented the module loader changes, and to Daniel Latypov for pushing the simplification of the nested arrays in .kunit_test_suites. I've tested this series both with builtin tests, and with modules on x86_64, but there's always the possibility that there's something subtle and nasty on another architecture, so please test! Cheers, -- David Changes since v1: https://lore.kernel.org/linux-kselftest/20220618090310.1174932-1-davidgow@g… - Fix a compile issue when CONFIG_KUNIT=m (Thanks Christophe) - No longer NULL-terminate suite_sets. - Move the thunderbird Kconfig to the correct patch (Thanks Andra) - Add all the Tested-by and Acked-by tags. --- Daniel Latypov (1): kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites David Gow (3): thunderbolt: test: Use kunit_test_suite() macro nitro_enclaves: test: Use kunit_test_suite() macro mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro Jeremy Kerr (1): kunit: unify module and builtin suite definitions drivers/mmc/host/Kconfig | 5 +- drivers/mmc/host/sdhci-of-aspeed-test.c | 8 +- drivers/mmc/host/sdhci-of-aspeed.c | 27 ---- drivers/thunderbolt/Kconfig | 5 +- drivers/thunderbolt/domain.c | 3 - drivers/thunderbolt/tb.h | 8 - drivers/thunderbolt/test.c | 12 +- drivers/virt/nitro_enclaves/Kconfig | 5 +- drivers/virt/nitro_enclaves/ne_misc_dev.c | 27 ---- .../virt/nitro_enclaves/ne_misc_dev_test.c | 5 +- include/kunit/test.h | 60 ++------ include/linux/module.h | 5 + kernel/module/main.c | 6 + lib/kunit/executor.c | 115 ++++---------- lib/kunit/executor_test.c | 144 +++++------------- lib/kunit/test.c | 54 ++++++- 16 files changed, 152 insertions(+), 337 deletions(-) -- 2.37.0.rc0.104.g0611611a94-goog

2 years, 10 months

4
11
0 0

[PATCH] KVM: selftest: Enhance handling WRMSR ICR register in x2APIC mode

by Zeng Guang

Hardware would directly write x2APIC ICR register instead of software emulation in some circumstances, e.g when Intel IPI virtualization is enabled. This behavior requires normal reserved bits checking to ensure them input as zero, otherwise it will cause #GP. So we need mask out those reserved bits from the data written to vICR register. Remove Delivery Status bit emulation in test case as this flag is invalid and not needed in x2APIC mode. KVM may ignore clearing it during interrupt dispatch which will lead to fake test failure. Opportunstically correct vector number for test sending IPI to non-existent vCPUs. Signed-off-by: Zeng Guang <guang.zeng(a)intel.com> --- .../selftests/kvm/x86_64/xapic_state_test.c | 20 ++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/kvm/x86_64/xapic_state_test.c b/tools/testing/selftests/kvm/x86_64/xapic_state_test.c index 0792334ba243..062d2e1adeb7 100644 --- a/tools/testing/selftests/kvm/x86_64/xapic_state_test.c +++ b/tools/testing/selftests/kvm/x86_64/xapic_state_test.c @@ -70,13 +70,27 @@ static void ____test_icr(struct kvm_vm *vm, struct kvm_vcpu *vcpu, uint64_t val) vcpu_ioctl(vm, vcpu->id, KVM_GET_LAPIC, &xapic); icr = (u64)(*((u32 *)&xapic.regs[APIC_ICR])) | (u64)(*((u32 *)&xapic.regs[APIC_ICR2])) << 32; - if (!vcpu->is_x2apic) + if (!vcpu->is_x2apic) { val &= (-1u | (0xffull << (32 + 24))); - ASSERT_EQ(icr, val & ~APIC_ICR_BUSY); + ASSERT_EQ(icr, val & ~APIC_ICR_BUSY); + } else { + ASSERT_EQ(icr, val); + } } +#define X2APIC_RSVED_BITS_MASK (GENMASK_ULL(31,20) | \ + GENMASK_ULL(17,16) | \ + GENMASK_ULL(13,13)) + static void __test_icr(struct kvm_vm *vm, struct kvm_vcpu *vcpu, uint64_t val) { + if (vcpu->is_x2apic) { + /* Hardware writing vICR register requires reserved bits 31:20, + * 17:16 and 13 kept as zero to avoid #GP exception. Data value + * written to vICR should mask out those bits above. + */ + val &= ~X2APIC_RSVED_BITS_MASK; + } ____test_icr(vm, vcpu, val | APIC_ICR_BUSY); ____test_icr(vm, vcpu, val & ~(u64)APIC_ICR_BUSY); } @@ -100,7 +114,7 @@ static void test_icr(struct kvm_vm *vm, struct kvm_vcpu *vcpu) icr = APIC_INT_ASSERT | 0xff; for (i = vcpu->id + 1; i < 0xff; i++) { for (j = 0; j < 8; j++) - __test_icr(vm, vcpu, i << (32 + 24) | APIC_INT_ASSERT | (j << 8)); + __test_icr(vm, vcpu, i << (32 + 24) | icr | (j << 8)); } /* And again with a shorthand destination for all types of IPIs. */ -- 2.27.0

2 years, 10 months

1
0
0 0

Ruch z pierwszej pozycji w Google

by Wiktor Zielonko

Dzień dobry, jakiś czas temu zgłosiła się do nas firma, której strona internetowa nie pozycjonowała się wysoko w wyszukiwarce Google. Na podstawie wykonanego przez nas audytu SEO zoptymalizowaliśmy treści na stronie pod kątem wcześniej opracowanych słów kluczowych. Nasz wewnętrzny system codziennie analizuje prawidłowe działanie witryny. Dzięki indywidualnej strategii, firma zdobywa coraz więcej Klientów. Czy chcieliby Państwo zwiększyć liczbę osób odwiedzających stronę internetową firmy? Mógłbym przedstawić ofertę? Pozdrawiam serdecznie, Wiktor Zielonko

2 years, 10 months

1
0
0 0

[PATCH] selftests: Make the usage formatting consistent in kselftest_deps.sh

by Gautam Menghani

Add a colon in the "Optional" test usage message to ensure consistency with the "Default" test usage message. Signed-off-by: Gautam Menghani <gautammenghani201(a)gmail.com> --- tools/testing/selftests/kselftest_deps.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest_deps.sh b/tools/testing/selftests/kselftest_deps.sh index 00e60d6eb16b..708cb5429633 100755 --- a/tools/testing/selftests/kselftest_deps.sh +++ b/tools/testing/selftests/kselftest_deps.sh @@ -26,7 +26,7 @@ echo " main Makefile when optional -p is specified." echo "- Prints pass/fail dependency check for each tests/sub-test." echo "- Prints pass/fail targets and libraries." echo "- Default: runs dependency checks on all tests." -echo "- Optional test name can be specified to check dependencies for it." +echo "- Optional: test name can be specified to check dependencies for it." exit 1 } -- 2.34.1

2 years, 10 months

1
0
0 0

[GIT PULL] Kselftest fixes update for Linux 5.19-rc4

by Shuah Khan

Hi Linus, Please pull the following Kselftest fixes update for Linux 5.19-rc4 This Kselftest fixes update for Linux 5.19-rc4 consists of compile time fixes and run-time resources leaks. -- Fix clang cross compilation -- Fix resource leak when return error -- fix compile error for dma_map_benchmark -- Fix regression - make use of GUP_TEST_FILE macro diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit f2906aa863381afb0015a9eb7fefad885d4e5a56: Linux 5.19-rc1 (2022-06-05 17:18:54 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-fixes-5.19-rc4 for you to fetch changes up to 9b4d5c01eb234f66a15a746b1c73e10209edb199: selftests: make use of GUP_TEST_FILE macro (2022-06-16 17:05:50 -0600) ---------------------------------------------------------------- linux-kselftest-fixes-5.19-rc4 This Kselftest fixes update for Linux 5.19-rc4 consists of compile time fixes and run-time resources leaks. -- Fix clang cross compilation -- Fix resource leak when return error -- fix compile error for dma_map_benchmark -- Fix regression - make use of GUP_TEST_FILE macro ---------------------------------------------------------------- Ding Xiang (1): selftests: vm: Fix resource leak when return error Joel Savitz (1): selftests: make use of GUP_TEST_FILE macro Mark Brown (1): selftests: Fix clang cross compilation Yu Liao (1): selftests dma: fix compile error for dma_map_benchmark tools/testing/selftests/dma/Makefile | 1 + tools/testing/selftests/dma/dma_map_benchmark.c | 2 +- tools/testing/selftests/lib.mk | 25 +++++++++++++++++++++++-- tools/testing/selftests/vm/gup_test.c | 4 ++-- tools/testing/selftests/vm/ksm_tests.c | 2 ++ 5 files changed, 29 insertions(+), 5 deletions(-) ----------------------------------------------------------------

2 years, 10 months

2
1
0 0

[PATCH] selftests/proc: Fix proc-pid-vm for vsyscall=xonly.

by Dylan Hatch

This test would erroneously fail the /proc/$PID/maps case if vsyscall=xonly since the existing probe of the vsyscall page only succeeds if the process has read permissions. Fix this by checking for either no vsyscall mapping OR an execute-only vsyscall mapping in the case were probing the vsyscall page segfaults. Signed-off-by: Dylan Hatch <dylanbhatch(a)google.com> --- tools/testing/selftests/proc/proc-pid-vm.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/proc/proc-pid-vm.c b/tools/testing/selftests/proc/proc-pid-vm.c index 28604c9f805c..5ca85520131f 100644 --- a/tools/testing/selftests/proc/proc-pid-vm.c +++ b/tools/testing/selftests/proc/proc-pid-vm.c @@ -213,9 +213,12 @@ static int make_exe(const uint8_t *payload, size_t len) static bool g_vsyscall = false; -static const char str_vsyscall[] = +static const char str_vsyscall_rx[] = "ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]\n"; +static const char str_vsyscall_x[] = +"ffffffffff600000-ffffffffff601000 --xp 00000000 00:00 0 [vsyscall]\n"; + #ifdef __x86_64__ static void sigaction_SIGSEGV(int _, siginfo_t *__, void *___) { @@ -261,6 +264,7 @@ int main(void) int exec_fd; vsyscall(); + const char *str_vsyscall = g_vsyscall ? str_vsyscall_rx : str_vsyscall_x; atexit(ate); @@ -314,7 +318,8 @@ int main(void) /* Test /proc/$PID/maps */ { - const size_t len = strlen(buf0) + (g_vsyscall ? strlen(str_vsyscall) : 0); + const size_t len_buf0 = strlen(buf0); + const size_t len_vsys = strlen(str_vsyscall); char buf[256]; ssize_t rv; int fd; @@ -325,11 +330,16 @@ int main(void) return 1; } rv = read(fd, buf, sizeof(buf)); - assert(rv == len); - assert(memcmp(buf, buf0, strlen(buf0)) == 0); if (g_vsyscall) { - assert(memcmp(buf + strlen(buf0), str_vsyscall, strlen(str_vsyscall)) == 0); + assert(rv == len_buf0 + len_vsys); + } else { + /* If vsyscall isn't readable, it's either x-only or not mapped at all */ + assert(rv == len_buf0 + len_vsys || rv == len_buf0); } + assert(memcmp(buf, buf0, len_buf0) == 0); + /* Check for vsyscall mapping if buf is long enough */ + if (rv == len_buf0 + len_vsys) + assert(memcmp(buf + len_buf0, str_vsyscall, len_vsys) == 0); } /* Test /proc/$PID/smaps */ -- 2.36.1.476.g0c4daa206d-goog

2 years, 10 months

2
7
0 0

[PATCH v2 0/9] drm: selftest: Convert to KUnit

by Maíra Canal

Hi everyone, Here is the v2 of the conversion of DRM selftests to KUnit. Some style changes were made to align to the drm_format_helper series [1] and the documentation [2], as renaming the kunit_suite and the test cases to use underscores as suggested, changing the filenames and using a generic symbol to group all tests at the config menu. Moreover, in the previous version of the series, the drm_cmdline_parser tests were broken into multiple test functions. As pointed out by Shuan Khan, it made the tests harder to comprehend. So, the refactoring was dropped and straightforward conversion of the tests was made without any functional changes. Thanks for your attention and any feedback is welcomed! Best Regards, - Maíra Canal v1 -> v2: https://lore.kernel.org/dri-devel/20220615135824.15522-1-maira.canal@usp.br… - The suites no longer end in _tests (David Gow). - Remove the TODO entry involving the conversion of selftests to KUnit (Javier Martinez Canillas). - Change the filenames to match the documentation: use *_test.c (Javier Martinez Canillas). - Add MODULE_LICENSE to all tests (kernel test robot). - Make use of a generic symbol to group all tests - DRM_KUNIT_TEST (Javier Martinez Canillas). - Add .kunitconfig on the first patch (it was on the second patch of the series). - Straightforward conversion of the drm_cmdline_parser tests without functional changes (Shuah Khan) - Add David's Tested-by tags [1] https://lore.kernel.org/dri-devel/20220620160640.3790-1-jose.exposito89@gma… [2] https://www.kernel.org/doc/html/latest/dev-tools/kunit/style.html Arthur Grillo (1): drm: selftest: convert drm_mm selftest to KUnit Maíra Canal (8): drm: selftest: convert drm_damage_helper selftest to KUnit drm: selftest: convert drm_cmdline_parser selftest to KUnit drm: selftest: convert drm_rect selftest to KUnit drm: selftest: convert drm_format selftest to KUnit drm: selftest: convert drm_plane_helper selftest to KUnit drm: selftest: convert drm_dp_mst_helper selftest to KUnit drm: selftest: convert drm_framebuffer selftest to KUnit drm: selftest: convert drm_buddy selftest to KUnit Documentation/gpu/todo.rst | 11 - drivers/gpu/drm/Kconfig | 15 +- drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/selftests/Makefile | 8 - .../gpu/drm/selftests/drm_buddy_selftests.h | 15 - .../gpu/drm/selftests/drm_cmdline_selftests.h | 68 - drivers/gpu/drm/selftests/drm_mm_selftests.h | 28 - .../gpu/drm/selftests/drm_modeset_selftests.h | 40 - drivers/gpu/drm/selftests/drm_selftest.c | 109 -- drivers/gpu/drm/selftests/drm_selftest.h | 41 - drivers/gpu/drm/selftests/test-drm_buddy.c | 994 -------------- .../drm/selftests/test-drm_cmdline_parser.c | 1141 ----------------- .../drm/selftests/test-drm_damage_helper.c | 667 ---------- drivers/gpu/drm/selftests/test-drm_format.c | 280 ---- .../drm/selftests/test-drm_modeset_common.c | 32 - .../drm/selftests/test-drm_modeset_common.h | 52 - drivers/gpu/drm/tests/.kunitconfig | 3 + drivers/gpu/drm/tests/Makefile | 6 + drivers/gpu/drm/tests/drm_buddy_test.c | 748 +++++++++++ .../gpu/drm/tests/drm_cmdline_parser_test.c | 1078 ++++++++++++++++ .../gpu/drm/tests/drm_damage_helper_test.c | 633 +++++++++ .../drm_dp_mst_helper_test.c} | 84 +- drivers/gpu/drm/tests/drm_format_test.c | 284 ++++ .../drm_framebuffer_test.c} | 25 +- .../test-drm_mm.c => tests/drm_mm_test.c} | 1135 +++++++--------- .../drm_plane_helper_test.c} | 103 +- .../test-drm_rect.c => tests/drm_rect_test.c} | 124 +- 27 files changed, 3395 insertions(+), 4331 deletions(-) delete mode 100644 drivers/gpu/drm/selftests/Makefile delete mode 100644 drivers/gpu/drm/selftests/drm_buddy_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_cmdline_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_mm_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_modeset_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.c delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.h delete mode 100644 drivers/gpu/drm/selftests/test-drm_buddy.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_cmdline_parser.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_damage_helper.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_format.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.h create mode 100644 drivers/gpu/drm/tests/.kunitconfig create mode 100644 drivers/gpu/drm/tests/Makefile create mode 100644 drivers/gpu/drm/tests/drm_buddy_test.c create mode 100644 drivers/gpu/drm/tests/drm_cmdline_parser_test.c create mode 100644 drivers/gpu/drm/tests/drm_damage_helper_test.c rename drivers/gpu/drm/{selftests/test-drm_dp_mst_helper.c => tests/drm_dp_mst_helper_test.c} (73%) create mode 100644 drivers/gpu/drm/tests/drm_format_test.c rename drivers/gpu/drm/{selftests/test-drm_framebuffer.c => tests/drm_framebuffer_test.c} (96%) rename drivers/gpu/drm/{selftests/test-drm_mm.c => tests/drm_mm_test.c} (58%) rename drivers/gpu/drm/{selftests/test-drm_plane_helper.c => tests/drm_plane_helper_test.c} (62%) rename drivers/gpu/drm/{selftests/test-drm_rect.c => tests/drm_rect_test.c} (53%) -- 2.36.1

2 years, 10 months

3
11
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror