- Linux-kselftest-mirror - lists.linaro.org

[PATCH v3] KVM: selftests: Fix target thread to be migrated in rseq_test

by Gavin Shan

In rseq_test, there are two threads, which are vCPU thread and migration worker separately. Unfortunately, the test has the wrong PID passed to sched_setaffinity() in the migration worker. It forces migration on the migration worker because zeroed PID represents the calling thread, which is the migration worker itself. It means the vCPU thread is never enforced to migration and it can migrate at any time, which eventually leads to failure as the following logs show. host# uname -r 5.19.0-rc6-gavin+ host# # cat /proc/cpuinfo | grep processor | tail -n 1 processor : 223 host# pwd /home/gavin/sandbox/linux.main/tools/testing/selftests/kvm host# for i in `seq 1 100`; do \ echo "--------> $i"; ./rseq_test; done --------> 1 --------> 2 --------> 3 --------> 4 --------> 5 --------> 6 ==== Test Assertion Failure ==== rseq_test.c:265: rseq_cpu == cpu pid=3925 tid=3925 errno=4 - Interrupted system call 1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2) 2 0x0000ffffb044affb: ?? ??:0 3 0x0000ffffb044b0c7: ?? ??:0 4 0x0000000000401a6f: _start at ??:? rseq CPU = 4, sched CPU = 27 Fix the issue by passing correct parameter, TID of the vCPU thread, to sched_setaffinity() in the migration worker. Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Signed-off-by: Gavin Shan <gshan(a)redhat.com> Reviewed-by: Oliver Upton <oliver.upton(a)linux.dev> --- v3: Improved changelog (Oliver Upon) --- tools/testing/selftests/kvm/rseq_test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c index 4158da0da2bb..c83ac7b467f8 100644 --- a/tools/testing/selftests/kvm/rseq_test.c +++ b/tools/testing/selftests/kvm/rseq_test.c @@ -38,6 +38,7 @@ static __thread volatile struct rseq __rseq = { */ #define NR_TASK_MIGRATIONS 100000 +static pid_t rseq_tid; static pthread_t migration_thread; static cpu_set_t possible_mask; static int min_cpu, max_cpu; @@ -106,7 +107,8 @@ static void *migration_worker(void *ign) * stable, i.e. while changing affinity is in-progress. */ smp_wmb(); - r = sched_setaffinity(0, sizeof(allowed_mask), &allowed_mask); + r = sched_setaffinity(rseq_tid, sizeof(allowed_mask), + &allowed_mask); TEST_ASSERT(!r, "sched_setaffinity failed, errno = %d (%s)", errno, strerror(errno)); smp_wmb(); @@ -231,6 +233,7 @@ int main(int argc, char *argv[]) vm = vm_create_default(VCPU_ID, 0, guest_code); ucall_init(vm, NULL); + rseq_tid = gettid(); pthread_create(&migration_thread, NULL, migration_worker, 0); for (i = 0; !done; i++) { -- 2.23.0

2 years, 11 months

2
2
0 0

[PATCH] tools: Change the division operator to a right shift operator

by Lv qian

Change the division operator to a right shift operator,Reduced assembly code. Signed-off-by: Lv qian <lvqian(a)nfschina.com> --- tools/testing/selftests/size/get_size.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/size/get_size.c b/tools/testing/selftests/size/get_size.c index 2980b1a63366..b1e34408f8c6 100644 --- a/tools/testing/selftests/size/get_size.c +++ b/tools/testing/selftests/size/get_size.c @@ -73,7 +73,7 @@ static int print_k_value(const char *s, unsigned long num, unsigned long units) print(s); temp = num; - temp = (temp * units)/1024; + temp = (temp * units)>>10; num = temp; ccode = print_num(num); print("\n"); -- 2.18.2

2 years, 11 months

1
0
0 0

[PATCH v2] KVM: selftests: Fix target thread to be migrated in rseq_test

by Gavin Shan

In rseq_test, there are two threads, which are thread group leader and migration worker. The migration worker relies on sched_setaffinity() to force migration on the thread group leader. Unfortunately, we have wrong parameter (0) passed to sched_getaffinity(). It's actually forcing migration on the migration worker instead of the thread group leader. It also means migration can happen on the thread group leader at any time, which eventually leads to failure as the following logs show. host# uname -r 5.19.0-rc6-gavin+ host# # cat /proc/cpuinfo | grep processor | tail -n 1 processor : 223 host# pwd /home/gavin/sandbox/linux.main/tools/testing/selftests/kvm host# for i in `seq 1 100`; \ do echo "--------> $i"; ./rseq_test; done --------> 1 --------> 2 --------> 3 --------> 4 --------> 5 --------> 6 ==== Test Assertion Failure ==== rseq_test.c:265: rseq_cpu == cpu pid=3925 tid=3925 errno=4 - Interrupted system call 1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2) 2 0x0000ffffb044affb: ?? ??:0 3 0x0000ffffb044b0c7: ?? ??:0 4 0x0000000000401a6f: _start at ??:? rseq CPU = 4, sched CPU = 27 This fixes the issue by passing correct parameter, tid of the group thread leader, to sched_setaffinity(). Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Signed-off-by: Gavin Shan <gshan(a)redhat.com> --- tools/testing/selftests/kvm/rseq_test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c index 4158da0da2bb..c83ac7b467f8 100644 --- a/tools/testing/selftests/kvm/rseq_test.c +++ b/tools/testing/selftests/kvm/rseq_test.c @@ -38,6 +38,7 @@ static __thread volatile struct rseq __rseq = { */ #define NR_TASK_MIGRATIONS 100000 +static pid_t rseq_tid; static pthread_t migration_thread; static cpu_set_t possible_mask; static int min_cpu, max_cpu; @@ -106,7 +107,8 @@ static void *migration_worker(void *ign) * stable, i.e. while changing affinity is in-progress. */ smp_wmb(); - r = sched_setaffinity(0, sizeof(allowed_mask), &allowed_mask); + r = sched_setaffinity(rseq_tid, sizeof(allowed_mask), + &allowed_mask); TEST_ASSERT(!r, "sched_setaffinity failed, errno = %d (%s)", errno, strerror(errno)); smp_wmb(); @@ -231,6 +233,7 @@ int main(int argc, char *argv[]) vm = vm_create_default(VCPU_ID, 0, guest_code); ucall_init(vm, NULL); + rseq_tid = gettid(); pthread_create(&migration_thread, NULL, migration_worker, 0); for (i = 0; !done; i++) { -- 2.23.0

2 years, 11 months

2
3
0 0

Hi Dear,

by Lily William

Hi Dear, My name is Dr Lily William from the United States.I am a French and American nationality (dual) living in the U.S and sometimes in France for Work Purpose. I hope you consider my friend request. I will share some of my pics and more details about myself when I get your response. Thanks With love Lily

2 years, 11 months

1
0
0 0

Re: linux-next: Tree for Jul 18 (ne_misc_dev.c)

by Randy Dunlap

On 7/18/22 04:02, Stephen Rothwell wrote: > Hi all, > > Changes since 20220715: > on x86_64: vmlinux.o: in function `ne_misc_dev_test_merge_phys_contig_memory_regions': ne_misc_dev.c:(.text+0x88eae7): undefined reference to `kunit_kmalloc_array' ld: ne_misc_dev.c:(.text+0x88eafd): undefined reference to `kunit_unary_assert_format' ld: ne_misc_dev.c:(.text+0x88eb25): undefined reference to `kunit_do_failed_assertion' ld: ne_misc_dev.c:(.text+0x88ec0c): undefined reference to `kunit_binary_assert_format' ld: ne_misc_dev.c:(.text+0x88ec3c): undefined reference to `kunit_do_failed_assertion' ld: ne_misc_dev.c:(.text+0x88ec58): undefined reference to `kunit_binary_assert_format' ld: ne_misc_dev.c:(.text+0x88ec88): undefined reference to `kunit_do_failed_assertion' ld: ne_misc_dev.c:(.text+0x88ecc2): undefined reference to `kunit_binary_assert_format' ld: ne_misc_dev.c:(.text+0x88ecf2): undefined reference to `kunit_do_failed_assertion' ld: ne_misc_dev.c:(.text+0x88ed19): undefined reference to `kunit_binary_assert_format' ld: ne_misc_dev.c:(.text+0x88ed49): undefined reference to `kunit_do_failed_assertion' ld: ne_misc_dev.c:(.text+0x88ed7e): undefined reference to `kunit_kfree' Full randconfig file is attached. -- ~Randy

2 years, 11 months

1
0
0 0

Re: FAIL: alsa/Makefile dependency check

by Mark Brown

On Sat, Jul 16, 2022 at 09:14:08AM +0800, li_jessen2016(a)gmail.com li wrote: > Thanks for your kind reply. Then what should I do? To officially raise a > bug to all the relevant persons in the kernel community? Yeah, I'd figure out who works on the script and mail them about it (or develop a patch if you feel up to it!).

2 years, 11 months

1
0
0 0

[PATCH AUTOSEL 5.18 39/41] wireguard: selftests: use virt machine on m68k

by Sasha Levin

From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> [ Upstream commit 1f2f341a62639c7066ee4c76b7d9ebe867e0a1d5 ] This should be a bit more stable hopefully. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/wireguard/qemu/Makefile | 5 +++-- tools/testing/selftests/wireguard/qemu/arch/m68k.config | 9 +++------ 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/wireguard/qemu/Makefile b/tools/testing/selftests/wireguard/qemu/Makefile index bca07b93eeb0..e8a82e495d2e 100644 --- a/tools/testing/selftests/wireguard/qemu/Makefile +++ b/tools/testing/selftests/wireguard/qemu/Makefile @@ -210,10 +210,11 @@ QEMU_ARCH := m68k KERNEL_ARCH := m68k KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=$.*$/\1/p' arch/m68k.config) +QEMU_VPORT_RESULT := virtio-serial-device ifeq ($(HOST_ARCH),$(ARCH)) -QEMU_MACHINE := -cpu host,accel=kvm -machine q800 -append $(KERNEL_CMDLINE) +QEMU_MACHINE := -cpu host,accel=kvm -machine virt -append $(KERNEL_CMDLINE) else -QEMU_MACHINE := -machine q800 -smp 1 -append $(KERNEL_CMDLINE) +QEMU_MACHINE := -machine virt -smp 1 -append $(KERNEL_CMDLINE) endif else ifeq ($(ARCH),riscv64) CHOST := riscv64-linux-musl diff --git a/tools/testing/selftests/wireguard/qemu/arch/m68k.config b/tools/testing/selftests/wireguard/qemu/arch/m68k.config index 9639bfe06074..39c48cba56b7 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/m68k.config +++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config @@ -1,10 +1,7 @@ CONFIG_MMU=y +CONFIG_VIRT=y CONFIG_M68KCLASSIC=y -CONFIG_M68040=y -CONFIG_MAC=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_TTYS=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1" +CONFIG_CMDLINE="console=ttyGF0 wg.success=vport0p1 panic_on_warn=1" CONFIG_FRAME_WARN=1024 -- 2.35.1

2 years, 11 months

2
3
0 0

[PATCH] KVM: selftests: Double check on the current CPU in rseq_test

by Gavin Shan

In rseq_test, there are two threads created. Those two threads are 'main' and 'migration_thread' separately. We also have the assumption that non-migration status on 'migration-worker' thread guarantees the same non-migration status on 'main' thread. Unfortunately, the assumption isn't true. The 'main' thread can be migrated from one CPU to another one between the calls to sched_getcpu() and READ_ONCE(__rseq.cpu_id). The following assert is raised eventually because of the mismatched CPU numbers. The issue can be reproduced on arm64 system occasionally. host# uname -r 5.19.0-rc6-gavin+ host# # cat /proc/cpuinfo | grep processor | tail -n 1 processor : 223 host# pwd /home/gavin/sandbox/linux.main/tools/testing/selftests/kvm host# for i in `seq 1 100`; \ do echo "--------> $i"; \ ./rseq_test; sleep 3; \ done --------> 1 --------> 2 --------> 3 --------> 4 --------> 5 --------> 6 ==== Test Assertion Failure ==== rseq_test.c:265: rseq_cpu == cpu pid=3925 tid=3925 errno=4 - Interrupted system call 1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2) 2 0x0000ffffb044affb: ?? ??:0 3 0x0000ffffb044b0c7: ?? ??:0 4 0x0000000000401a6f: _start at ??:? rseq CPU = 4, sched CPU = 27 This fixes the issue by double-checking on the current CPU after call to READ_ONCE(__rseq.cpu_id) and restarting the test if the two consecutive CPU numbers aren't euqal. Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Signed-off-by: Gavin Shan <gshan(a)redhat.com> --- tools/testing/selftests/kvm/rseq_test.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c index 4158da0da2bb..74709dd9f5b2 100644 --- a/tools/testing/selftests/kvm/rseq_test.c +++ b/tools/testing/selftests/kvm/rseq_test.c @@ -207,7 +207,7 @@ int main(int argc, char *argv[]) { int r, i, snapshot; struct kvm_vm *vm; - u32 cpu, rseq_cpu; + u32 cpu, rseq_cpu, last_cpu; /* Tell stdout not to buffer its content */ setbuf(stdout, NULL); @@ -259,8 +259,9 @@ int main(int argc, char *argv[]) smp_rmb(); cpu = sched_getcpu(); rseq_cpu = READ_ONCE(__rseq.cpu_id); + last_cpu = sched_getcpu(); smp_rmb(); - } while (snapshot != atomic_read(&seq_cnt)); + } while (snapshot != atomic_read(&seq_cnt) || cpu != last_cpu); TEST_ASSERT(rseq_cpu == cpu, "rseq CPU = %d, sched CPU = %d\n", rseq_cpu, cpu); -- 2.23.0

2 years, 12 months

3
7
0 0

[PATCH v7 00/25] Rust support

by Miguel Ojeda

Rust support This is the patch series (v7) to add support for Rust as a second language to the Linux kernel. If you are interested in following this effort, please join us in the mailing list at: rust-for-linux(a)vger.kernel.org and take a look at the project itself at: https://github.com/Rust-for-Linux As usual, special thanks go to ISRG (Internet Security Research Group) and Google for their financial support on this endeavor. Cheers, Miguel -- # Rust support This cover letter explains the major changes and updates done since the previous ones. For those, please see: RFC: https://lore.kernel.org/lkml/20210414184604.23473-1-ojeda@kernel.org/ v1: https://lore.kernel.org/lkml/20210704202756.29107-1-ojeda@kernel.org/ v2: https://lore.kernel.org/lkml/20211206140313.5653-1-ojeda@kernel.org/ v3: https://lore.kernel.org/lkml/20220117053349.6804-1-ojeda@kernel.org/ v4: https://lore.kernel.org/lkml/20220212130410.6901-1-ojeda@kernel.org/ v5: https://lore.kernel.org/lkml/20220317181032.15436-1-ojeda@kernel.org/ v6: https://lore.kernel.org/lkml/20220507052451.12890-1-ojeda@kernel.org/ This is a small round to address the comments made in v6 plus a few related changes: - Added `%pA` to `Documentation/core-api/printk-formats.rst`. - Added `checkpatch.pl` patch to search for `%pA` in C code. - Added `checkpatch.pl` patch to enable language-independent checks. - Added UML (x86_64) support, for KUnit (thanks David Gow!). - Added inline licensing information ("Apache-2.0 OR MIT") in the commit message of the `alloc` patch, as well as in `rust/alloc/README.md` in the following patch. - Added SPDX license identifiers to `Documentation/rust/`. - Reformatted `Documentation/rust/arch-support.rst` list table into simple table. - Removed logo from documentation patch; used Linux GIF one for the Rust generated docs in its place (to be replaced with the SVG one once available). - Used `"GPL"` instead of `"GPL v2"` for the `license` field of the `module!` macro. - Moved `module_misc_device!` macro in `samples/rust/rust_random.rs` to the top of the file in `samples/rust/` for consistency. - Sorted `#include` lists in `rust/kernel/bindings_helper.h` and `rust/helpers.c`. - Fixed some English typos. - Made the patches more `checkpatch.pl`-clean overall. - Picked up Reviewed-by and Acked-by tags. ## Patch series status The Rust support is still to be considered experimental. However, support is good enough that kernel developers can start working on the Rust abstractions for subsystems and write drivers and other modules. The current series has just arrived in `linux-next`, as usual. Similarly, the preview docs for this series can be seen at: https://rust-for-linux.github.io/docs/kernel/ As usual, please see the following link for the live list of unstable Rust features we are using: https://github.com/Rust-for-Linux/linux/issues/2 ## Conferences, meetings and liaisons We would like to remind everyone about the Rust MC (microconference) of LPC 2022 (Linux Plumbers Conference): https://lpc.events/event/16/contributions/1159/ The Rust MC intends to cover talks and discussions on both Rust for Linux as well as other non-kernel Rust topics. The Call for Proposals is open! ## Acknowledgements The signatures in the main commits correspond to the people that wrote code that has ended up in them at the present time. For details on contributions to code and discussions, please see our repository: https://github.com/Rust-for-Linux/linux However, we would like to give credit to everyone that has contributed in one way or another to the Rust for Linux project. Since the previous cover letter: - Kees Cook for his reviews of some of the v6 patches. - David Gow and Brendan Higgins for their reviews of the KUnit prerequisite patch and their feedback. - Jonathan Corbet and Akira Yokosawa for their review of the documentation patch and feedback on documentation rules. - Gary Guo for working on improvements to the Rust compiler that could make our `static_assert!` macro applicable in more cases. - bjorn3 for working on making `rustc_parse_format` compile on a stable Rust compiler so that it may be used by lightweight formatting systems (for instance, by the kernel). - As usual, bjorn3 and Gary Guo for all the input on Rust compiler details, reviews and suggestions. - Esteban Blanc, Arthur Cohen and Martin Schmidt for rebasing their SPI abstraction work. - Maciej Falkowski for continuing his work on the Samsung Exynos TRNG driver and the required abstractions around it, such as adding `delay`, `ktime` and `iopoll` abstractions, new methods to `platform::Device` and run-time power management abstractions. - Yuheng Su for working on cleaning up the `Module::init` interface. - Peng Hao for working on wrapping `mm_struct`. - Sergio González Collado for continuing his work on the GitHub CI problem matchers. - Wei Liu for taking the time to answer questions from newcomers in Zulip. - Philip Li, Yujie Liu et al. for continuing their work on adding Rust support to the Intel 0DAY/LKP kernel test robot. - Philip Herron and Arthur Cohen (and his supporters Open Source Security and Embecosm) et al. for their ongoing work on GCC Rust. - Antoni Boucher (and his supporters) et al. for their ongoing work on `rustc_codegen_gcc`. - Mats Larsen, Marc Poulhiès et al. for their ongoing work on improving Rust support in Compiler Explorer. - Many folks that have reported issues, tested the project, helped spread the word, joined discussions and contributed in other ways! Please see also the acknowledgements on the previous cover letters. Boqun Feng (1): kallsyms: avoid hardcoding the buffer size Gary Guo (2): rust: add `build_error` crate vsprintf: add new `%pA` format specifier Miguel Ojeda (18): kallsyms: support "big" kernel symbols kallsyms: increase maximum kernel symbol length to 512 kunit: take `kunit_assert` as `const` rust: add C helpers rust: add `compiler_builtins` crate rust: import upstream `alloc` crate rust: adapt `alloc` crate to the kernel rust: add `macros` crate rust: export generated symbols scripts: checkpatch: diagnose uses of `%pA` in the C side scripts: checkpatch: enable language-independent checks for Rust scripts: add `rustdoc_test_{builder,gen}.py` scripts scripts: add `generate_rust_analyzer.py` scripts scripts: decode_stacktrace: demangle Rust symbols docs: add Rust documentation Kbuild: add Rust support samples: add Rust examples MAINTAINERS: Rust Wedson Almeida Filho (4): rust: add `kernel` crate's `sync` module rust: add `kernel` crate [RFC] drivers: gpio: PrimeCell PL061 in Rust [RFC] drivers: android: Binder IPC in Rust .gitignore | 5 + .rustfmt.toml | 12 + Documentation/core-api/printk-formats.rst | 10 + Documentation/doc-guide/kernel-doc.rst | 3 + Documentation/index.rst | 1 + Documentation/kbuild/kbuild.rst | 17 + Documentation/kbuild/makefiles.rst | 50 +- Documentation/process/changes.rst | 41 + Documentation/rust/arch-support.rst | 25 + Documentation/rust/coding-guidelines.rst | 216 ++ Documentation/rust/general-information.rst | 79 + Documentation/rust/index.rst | 22 + Documentation/rust/quick-start.rst | 232 ++ MAINTAINERS | 15 + Makefile | 175 +- arch/Kconfig | 6 + arch/arm/Kconfig | 1 + arch/arm64/Kconfig | 1 + arch/powerpc/Kconfig | 1 + arch/riscv/Kconfig | 1 + arch/riscv/Makefile | 5 + arch/um/Kconfig | 1 + arch/x86/Kconfig | 1 + arch/x86/Makefile | 14 + drivers/android/Kconfig | 6 + drivers/android/Makefile | 2 + drivers/android/allocation.rs | 266 ++ drivers/android/context.rs | 80 + drivers/android/defs.rs | 99 + drivers/android/node.rs | 476 +++ drivers/android/process.rs | 960 +++++ drivers/android/range_alloc.rs | 189 + drivers/android/rust_binder.rs | 111 + drivers/android/thread.rs | 870 +++++ drivers/android/transaction.rs | 326 ++ drivers/gpio/Kconfig | 8 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio_pl061_rust.rs | 370 ++ include/kunit/test.h | 2 +- include/linux/kallsyms.h | 2 +- include/linux/spinlock.h | 25 +- include/uapi/linux/android/binder.h | 28 +- init/Kconfig | 45 +- kernel/kallsyms.c | 26 +- kernel/livepatch/core.c | 4 +- lib/Kconfig.debug | 155 + lib/kunit/test.c | 4 +- lib/vsprintf.c | 13 + rust/.gitignore | 10 + rust/Makefile | 398 +++ rust/alloc/README.md | 33 + rust/alloc/alloc.rs | 438 +++ rust/alloc/borrow.rs | 498 +++ rust/alloc/boxed.rs | 2007 +++++++++++ rust/alloc/collections/mod.rs | 156 + rust/alloc/fmt.rs | 601 ++++ rust/alloc/lib.rs | 226 ++ rust/alloc/macros.rs | 127 + rust/alloc/raw_vec.rs | 567 +++ rust/alloc/slice.rs | 1282 +++++++ rust/alloc/str.rs | 632 ++++ rust/alloc/string.rs | 2869 +++++++++++++++ rust/alloc/vec/drain.rs | 186 + rust/alloc/vec/drain_filter.rs | 145 + rust/alloc/vec/into_iter.rs | 356 ++ rust/alloc/vec/is_zero.rs | 106 + rust/alloc/vec/mod.rs | 3362 ++++++++++++++++++ rust/alloc/vec/partial_eq.rs | 49 + rust/alloc/vec/set_len_on_drop.rs | 30 + rust/alloc/vec/spec_extend.rs | 174 + rust/bindgen_parameters | 17 + rust/build_error.rs | 29 + rust/compiler_builtins.rs | 57 + rust/exports.c | 20 + rust/helpers.c | 644 ++++ rust/kernel/allocator.rs | 65 + rust/kernel/amba.rs | 257 ++ rust/kernel/bindings.rs | 47 + rust/kernel/bindings_helper.h | 46 + rust/kernel/build_assert.rs | 82 + rust/kernel/c_types.rs | 119 + rust/kernel/chrdev.rs | 207 ++ rust/kernel/clk.rs | 79 + rust/kernel/cred.rs | 46 + rust/kernel/device.rs | 546 +++ rust/kernel/driver.rs | 442 +++ rust/kernel/error.rs | 565 +++ rust/kernel/file.rs | 860 +++++ rust/kernel/gpio.rs | 478 +++ rust/kernel/hwrng.rs | 242 ++ rust/kernel/io_buffer.rs | 153 + rust/kernel/io_mem.rs | 275 ++ rust/kernel/iov_iter.rs | 81 + rust/kernel/irq.rs | 411 +++ rust/kernel/kasync.rs | 6 + rust/kernel/kasync/net.rs | 322 ++ rust/kernel/kunit.rs | 91 + rust/kernel/lib.rs | 261 ++ rust/kernel/linked_list.rs | 247 ++ rust/kernel/miscdev.rs | 291 ++ rust/kernel/mm.rs | 149 + rust/kernel/module_param.rs | 498 +++ rust/kernel/net.rs | 392 ++ rust/kernel/net/filter.rs | 447 +++ rust/kernel/of.rs | 63 + rust/kernel/pages.rs | 144 + rust/kernel/platform.rs | 223 ++ rust/kernel/power.rs | 118 + rust/kernel/prelude.rs | 36 + rust/kernel/print.rs | 405 +++ rust/kernel/random.rs | 42 + rust/kernel/raw_list.rs | 361 ++ rust/kernel/rbtree.rs | 563 +++ rust/kernel/revocable.rs | 161 + rust/kernel/security.rs | 38 + rust/kernel/static_assert.rs | 38 + rust/kernel/std_vendor.rs | 160 + rust/kernel/str.rs | 597 ++++ rust/kernel/sync.rs | 161 + rust/kernel/sync/arc.rs | 503 +++ rust/kernel/sync/condvar.rs | 138 + rust/kernel/sync/guard.rs | 169 + rust/kernel/sync/locked_by.rs | 111 + rust/kernel/sync/mutex.rs | 153 + rust/kernel/sync/nowait.rs | 188 + rust/kernel/sync/revocable.rs | 250 ++ rust/kernel/sync/rwsem.rs | 197 + rust/kernel/sync/seqlock.rs | 202 ++ rust/kernel/sync/smutex.rs | 295 ++ rust/kernel/sync/spinlock.rs | 360 ++ rust/kernel/sysctl.rs | 199 ++ rust/kernel/task.rs | 175 + rust/kernel/types.rs | 679 ++++ rust/kernel/user_ptr.rs | 175 + rust/macros/helpers.rs | 79 + rust/macros/lib.rs | 94 + rust/macros/module.rs | 631 ++++ samples/Kconfig | 2 + samples/Makefile | 1 + samples/rust/Kconfig | 140 + samples/rust/Makefile | 16 + samples/rust/hostprogs/.gitignore | 3 + samples/rust/hostprogs/Makefile | 5 + samples/rust/hostprogs/a.rs | 7 + samples/rust/hostprogs/b.rs | 5 + samples/rust/hostprogs/single.rs | 12 + samples/rust/rust_chrdev.rs | 50 + samples/rust/rust_minimal.rs | 35 + samples/rust/rust_miscdev.rs | 143 + samples/rust/rust_module_parameters.rs | 69 + samples/rust/rust_netfilter.rs | 54 + samples/rust/rust_platform.rs | 22 + samples/rust/rust_print.rs | 54 + samples/rust/rust_random.rs | 60 + samples/rust/rust_semaphore.rs | 171 + samples/rust/rust_semaphore_c.c | 212 ++ samples/rust/rust_stack_probing.rs | 36 + samples/rust/rust_sync.rs | 93 + scripts/.gitignore | 1 + scripts/Kconfig.include | 6 +- scripts/Makefile | 3 + scripts/Makefile.build | 60 + scripts/Makefile.debug | 10 + scripts/Makefile.host | 34 +- scripts/Makefile.lib | 12 + scripts/Makefile.modfinal | 8 +- scripts/cc-version.sh | 12 +- scripts/checkpatch.pl | 8 +- scripts/decode_stacktrace.sh | 14 + scripts/generate_rust_analyzer.py | 134 + scripts/generate_rust_target.rs | 227 ++ scripts/is_rust_module.sh | 13 + scripts/kallsyms.c | 47 +- scripts/kconfig/confdata.c | 75 + scripts/min-tool-version.sh | 6 + scripts/rust-is-available-bindgen-libclang.h | 2 + scripts/rust-is-available.sh | 158 + scripts/rustdoc_test_builder.py | 59 + scripts/rustdoc_test_gen.py | 164 + tools/include/linux/kallsyms.h | 2 +- tools/lib/perf/include/perf/event.h | 2 +- tools/lib/symbol/kallsyms.h | 2 +- 182 files changed, 37614 insertions(+), 69 deletions(-) create mode 100644 .rustfmt.toml create mode 100644 Documentation/rust/arch-support.rst create mode 100644 Documentation/rust/coding-guidelines.rst create mode 100644 Documentation/rust/general-information.rst create mode 100644 Documentation/rust/index.rst create mode 100644 Documentation/rust/quick-start.rst create mode 100644 drivers/android/allocation.rs create mode 100644 drivers/android/context.rs create mode 100644 drivers/android/defs.rs create mode 100644 drivers/android/node.rs create mode 100644 drivers/android/process.rs create mode 100644 drivers/android/range_alloc.rs create mode 100644 drivers/android/rust_binder.rs create mode 100644 drivers/android/thread.rs create mode 100644 drivers/android/transaction.rs create mode 100644 drivers/gpio/gpio_pl061_rust.rs create mode 100644 rust/.gitignore create mode 100644 rust/Makefile create mode 100644 rust/alloc/README.md create mode 100644 rust/alloc/alloc.rs create mode 100644 rust/alloc/borrow.rs create mode 100644 rust/alloc/boxed.rs create mode 100644 rust/alloc/collections/mod.rs create mode 100644 rust/alloc/fmt.rs create mode 100644 rust/alloc/lib.rs create mode 100644 rust/alloc/macros.rs create mode 100644 rust/alloc/raw_vec.rs create mode 100644 rust/alloc/slice.rs create mode 100644 rust/alloc/str.rs create mode 100644 rust/alloc/string.rs create mode 100644 rust/alloc/vec/drain.rs create mode 100644 rust/alloc/vec/drain_filter.rs create mode 100644 rust/alloc/vec/into_iter.rs create mode 100644 rust/alloc/vec/is_zero.rs create mode 100644 rust/alloc/vec/mod.rs create mode 100644 rust/alloc/vec/partial_eq.rs create mode 100644 rust/alloc/vec/set_len_on_drop.rs create mode 100644 rust/alloc/vec/spec_extend.rs create mode 100644 rust/bindgen_parameters create mode 100644 rust/build_error.rs create mode 100644 rust/compiler_builtins.rs create mode 100644 rust/exports.c create mode 100644 rust/helpers.c create mode 100644 rust/kernel/allocator.rs create mode 100644 rust/kernel/amba.rs create mode 100644 rust/kernel/bindings.rs create mode 100644 rust/kernel/bindings_helper.h create mode 100644 rust/kernel/build_assert.rs create mode 100644 rust/kernel/c_types.rs create mode 100644 rust/kernel/chrdev.rs create mode 100644 rust/kernel/clk.rs create mode 100644 rust/kernel/cred.rs create mode 100644 rust/kernel/device.rs create mode 100644 rust/kernel/driver.rs create mode 100644 rust/kernel/error.rs create mode 100644 rust/kernel/file.rs create mode 100644 rust/kernel/gpio.rs create mode 100644 rust/kernel/hwrng.rs create mode 100644 rust/kernel/io_buffer.rs create mode 100644 rust/kernel/io_mem.rs create mode 100644 rust/kernel/iov_iter.rs create mode 100644 rust/kernel/irq.rs create mode 100644 rust/kernel/kasync.rs create mode 100644 rust/kernel/kasync/net.rs create mode 100644 rust/kernel/kunit.rs create mode 100644 rust/kernel/lib.rs create mode 100644 rust/kernel/linked_list.rs create mode 100644 rust/kernel/miscdev.rs create mode 100644 rust/kernel/mm.rs create mode 100644 rust/kernel/module_param.rs create mode 100644 rust/kernel/net.rs create mode 100644 rust/kernel/net/filter.rs create mode 100644 rust/kernel/of.rs create mode 100644 rust/kernel/pages.rs create mode 100644 rust/kernel/platform.rs create mode 100644 rust/kernel/power.rs create mode 100644 rust/kernel/prelude.rs create mode 100644 rust/kernel/print.rs create mode 100644 rust/kernel/random.rs create mode 100644 rust/kernel/raw_list.rs create mode 100644 rust/kernel/rbtree.rs create mode 100644 rust/kernel/revocable.rs create mode 100644 rust/kernel/security.rs create mode 100644 rust/kernel/static_assert.rs create mode 100644 rust/kernel/std_vendor.rs create mode 100644 rust/kernel/str.rs create mode 100644 rust/kernel/sync.rs create mode 100644 rust/kernel/sync/arc.rs create mode 100644 rust/kernel/sync/condvar.rs create mode 100644 rust/kernel/sync/guard.rs create mode 100644 rust/kernel/sync/locked_by.rs create mode 100644 rust/kernel/sync/mutex.rs create mode 100644 rust/kernel/sync/nowait.rs create mode 100644 rust/kernel/sync/revocable.rs create mode 100644 rust/kernel/sync/rwsem.rs create mode 100644 rust/kernel/sync/seqlock.rs create mode 100644 rust/kernel/sync/smutex.rs create mode 100644 rust/kernel/sync/spinlock.rs create mode 100644 rust/kernel/sysctl.rs create mode 100644 rust/kernel/task.rs create mode 100644 rust/kernel/types.rs create mode 100644 rust/kernel/user_ptr.rs create mode 100644 rust/macros/helpers.rs create mode 100644 rust/macros/lib.rs create mode 100644 rust/macros/module.rs create mode 100644 samples/rust/Kconfig create mode 100644 samples/rust/Makefile create mode 100644 samples/rust/hostprogs/.gitignore create mode 100644 samples/rust/hostprogs/Makefile create mode 100644 samples/rust/hostprogs/a.rs create mode 100644 samples/rust/hostprogs/b.rs create mode 100644 samples/rust/hostprogs/single.rs create mode 100644 samples/rust/rust_chrdev.rs create mode 100644 samples/rust/rust_minimal.rs create mode 100644 samples/rust/rust_miscdev.rs create mode 100644 samples/rust/rust_module_parameters.rs create mode 100644 samples/rust/rust_netfilter.rs create mode 100644 samples/rust/rust_platform.rs create mode 100644 samples/rust/rust_print.rs create mode 100644 samples/rust/rust_random.rs create mode 100644 samples/rust/rust_semaphore.rs create mode 100644 samples/rust/rust_semaphore_c.c create mode 100644 samples/rust/rust_stack_probing.rs create mode 100644 samples/rust/rust_sync.rs create mode 100755 scripts/generate_rust_analyzer.py create mode 100644 scripts/generate_rust_target.rs create mode 100755 scripts/is_rust_module.sh create mode 100644 scripts/rust-is-available-bindgen-libclang.h create mode 100755 scripts/rust-is-available.sh create mode 100755 scripts/rustdoc_test_builder.py create mode 100755 scripts/rustdoc_test_gen.py base-commit: 4b0986a3613c92f4ec1bdc7f60ec66fea135991f -- 2.36.1

2 years, 12 months

6
8
0 0

[PATCH v2] kcsan: test: Add a .kunitconfig to run KCSAN tests

by David Gow

Add a .kunitconfig file, which provides a default, working config for running the KCSAN tests. Note that it needs to run on an SMP machine, so to run under kunit_tool, the --qemu_args option should be used (on a supported architecture, like x86_64). For example: ./tools/testing/kunit/kunit.py run --arch=x86_64 --qemu_args='-smp 8' --kunitconfig=kernel/kcsan Signed-off-by: David Gow <davidgow(a)google.com> Reviewed-by: Marco Elver <elver(a)google.com> Acked-by: Brendan Higgins <brendanhiggins(a)google.com> --- kernel/kcsan/.kunitconfig | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 kernel/kcsan/.kunitconfig diff --git a/kernel/kcsan/.kunitconfig b/kernel/kcsan/.kunitconfig new file mode 100644 index 000000000000..e82f0f52ab0a --- /dev/null +++ b/kernel/kcsan/.kunitconfig @@ -0,0 +1,24 @@ +# Note that the KCSAN tests need to run on an SMP setup. +# Under kunit_tool, this can be done by using the --qemu_args +# option to configure a machine with several cores. For example: +# ./tools/testing/kunit/kunit.py run --kunitconfig=kernel/kcsan \ +# --arch=x86_64 --qemu_args="-smp 8" + +CONFIG_KUNIT=y + +CONFIG_DEBUG_KERNEL=y + +# Need some level of concurrency to test a concurrency sanitizer. +CONFIG_SMP=y + +CONFIG_KCSAN=y +CONFIG_KCSAN_KUNIT_TEST=y + +# Set these if you want to run test_barrier_nothreads +#CONFIG_KCSAN_STRICT=y +#CONFIG_KCSAN_WEAK_MEMORY=y + +# This prevents the test from timing out on many setups. Feel free to remove +# (or alter) this, in conjunction with setting a different test timeout with, +# for example, the --timeout kunit_tool option. +CONFIG_KCSAN_REPORT_ONCE_IN_MS=100 -- 2.37.0.170.g444d1eabd0-goog

2 years, 12 months

2
1
0 0

Re: FAIL: alsa/Makefile dependency check

by Mark Brown

On Fri, Jul 15, 2022 at 10:47:16PM +0800, li_jessen2016(a)gmail.com li wrote: > FAIL: alsa/Makefile dependency check: $(shell > FAIL: alsa/Makefile dependency check: pkg-config .. > So I wonder why the FAIL info appears in the presence of *$(shell > pkg-config --libs alsa) *in alsa/Makefile. Is it some sort of bug or > did I miss something? I think that's a bug in this tool you're running - it's not understanding the $(shell ...) and generating false positives, not 100% sure what it's trying to do but it's fairly clearly parsing every element in the statement as a dependency of some kind.

2 years, 12 months

1
0
0 0

Wycena paneli fotowoltaicznych

by Norbert Karecki

Dzień dobry, dostrzegam możliwość współpracy z Państwa firmą. Świadczymy kompleksową obsługę inwestycji w fotowoltaikę, która obniża koszty energii elektrycznej nawet o 90%. Czy są Państwo zainteresowani weryfikacją wstępnych propozycji? Pozdrawiam, Norbert Karecki

2 years, 12 months

1
0
0 0

[PATCH v2] firmware_loader: Replace kmap() with kmap_local_page()

by Fabio M. De Francesco

The use of kmap() is being deprecated in favor of kmap_local_page(). Two main problems with kmap(): (1) It comes with an overhead as mapping space is restricted and protected by a global lock for synchronization and (2) kmap() also requires global TLB invalidation when the kmap’s pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. kmap_local_page() is preferred over kmap() and kmap_atomic(). Where it cannot mechanically replace the latters, code refactor should be considered (special care must be taken if kernel virtual addresses are aliases in different contexts). With kmap_local_page() the mappings are per thread, CPU local, can take page faults, and can be called from any context (including interrupts). Call kmap_local_page() in firmware_loader wherever kmap() is currently used. In firmware_rw() use the helpers copy_{from,to}_page() instead of open coding the local mappings + memcpy(). Successfully tested with "firmware" selftests on a QEMU/KVM 32-bits VM with 4GB RAM, booting a kernel with HIGHMEM64GB enabled. Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Luis Chamberlain <mcgrof(a)kernel.org> Suggested-by: Ira Weiny <ira.weiny(a)intel.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco(a)gmail.com> --- v1->v2: According to the comments from Greg Kroah-Hartman (thanks!), extend the commit message adding information about why kmap() should be avoided. Delete an unused variable left in the code of v1, which has been Reported-by: kernel test robot <lkp(a)intel.com> drivers/base/firmware_loader/main.c | 4 ++-- drivers/base/firmware_loader/sysfs.c | 10 ++++------ 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/base/firmware_loader/main.c b/drivers/base/firmware_loader/main.c index ac3f34e80194..7c3590fd97c2 100644 --- a/drivers/base/firmware_loader/main.c +++ b/drivers/base/firmware_loader/main.c @@ -435,11 +435,11 @@ static int fw_decompress_xz_pages(struct device *dev, struct fw_priv *fw_priv, /* decompress onto the new allocated page */ page = fw_priv->pages[fw_priv->nr_pages - 1]; - xz_buf.out = kmap(page); + xz_buf.out = kmap_local_page(page); xz_buf.out_pos = 0; xz_buf.out_size = PAGE_SIZE; xz_ret = xz_dec_run(xz_dec, &xz_buf); - kunmap(page); + kunmap_local(xz_buf.out); fw_priv->size += xz_buf.out_pos; /* partial decompression means either end or error */ if (xz_buf.out_pos != PAGE_SIZE) diff --git a/drivers/base/firmware_loader/sysfs.c b/drivers/base/firmware_loader/sysfs.c index 5b0b85b70b6f..77bad32c481a 100644 --- a/drivers/base/firmware_loader/sysfs.c +++ b/drivers/base/firmware_loader/sysfs.c @@ -242,19 +242,17 @@ static void firmware_rw(struct fw_priv *fw_priv, char *buffer, loff_t offset, size_t count, bool read) { while (count) { - void *page_data; int page_nr = offset >> PAGE_SHIFT; int page_ofs = offset & (PAGE_SIZE - 1); int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count); - page_data = kmap(fw_priv->pages[page_nr]); - if (read) - memcpy(buffer, page_data + page_ofs, page_cnt); + memcpy_from_page(buffer, fw_priv->pages[page_nr], + page_ofs, page_cnt); else - memcpy(page_data + page_ofs, buffer, page_cnt); + memcpy_to_page(fw_priv->pages[page_nr], page_ofs, + buffer, page_cnt); - kunmap(fw_priv->pages[page_nr]); buffer += page_cnt; offset += page_cnt; count -= page_cnt; -- 2.37.0

2 years, 12 months

2
1
0 0

[PATCH 1/2] kunit: tool: Add x86_64-smp architecture for SMP testing

by David Gow

Add a new QEMU config for kunit_tool, x86_64-smp, which provides an 8-cpu SMP setup. No other kunit_tool configurations provide an SMP setup, so this is the best bet for testing things like KCSAN, which require a multicore/multi-cpu system. The choice of 8 CPUs is pretty arbitrary: it's enough to get tests like KCSAN to run with a nontrivial number of worker threads, while still working relatively quickly on older machines. Signed-off-by: David Gow <davidgow(a)google.com> --- This is based off the discussion in: https://groups.google.com/g/kasan-dev/c/A7XzC2pXRC8 --- tools/testing/kunit/qemu_configs/x86_64-smp.py | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 tools/testing/kunit/qemu_configs/x86_64-smp.py diff --git a/tools/testing/kunit/qemu_configs/x86_64-smp.py b/tools/testing/kunit/qemu_configs/x86_64-smp.py new file mode 100644 index 000000000000..a95623f5f8b7 --- /dev/null +++ b/tools/testing/kunit/qemu_configs/x86_64-smp.py @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0 +from ..qemu_config import QemuArchParams + +QEMU_ARCH = QemuArchParams(linux_arch='x86_64', + kconfig=''' +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SMP=y + ''', + qemu_arch='x86_64', + kernel_path='arch/x86/boot/bzImage', + kernel_command_line='console=ttyS0', + extra_qemu_params=['-smp', '8']) -- 2.36.0.550.gb090851708-goog

2 years, 12 months

4
20
0 0

kselftest/next build: 8 builds: 0 failed, 8 passed (v5.19-rc4-23-ga917dd94b832)

by kernelci.org bot

kselftest/next build: 8 builds: 0 failed, 8 passed (v5.19-rc4-23-ga917dd94b832) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v5.19-rc4-23-ga917d… Tree: kselftest Branch: next Git Describe: v5.19-rc4-23-ga917dd94b832 Git Commit: a917dd94b832c8f4ad458d0ca2bd1007466c5643 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

2 years, 12 months

1
0
0 0

[PATCH v2] selftests: timers: clocksource-switch: add 'runtime' command line parameter

by Wolfram Sang

So the user can decide how long the test should run. Signed-off-by: Wolfram Sang <wsa+renesas(a)sang-engineering.com> Acked-by: John Stultz <jstultz(a)google.com> --- Change since V1: * added the new parameter to the help printout tools/testing/selftests/timers/clocksource-switch.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/timers/clocksource-switch.c b/tools/testing/selftests/timers/clocksource-switch.c index 5256e6215980..577e4b74211a 100644 --- a/tools/testing/selftests/timers/clocksource-switch.c +++ b/tools/testing/selftests/timers/clocksource-switch.c @@ -124,17 +124,22 @@ int main(int argc, char **argv) char orig_clk[512]; int count, i, status, opt; int do_sanity_check = 1; + int runtime = 60; pid_t pid; /* Process arguments */ - while ((opt = getopt(argc, argv, "s")) != -1) { + while ((opt = getopt(argc, argv, "st:")) != -1) { switch (opt) { case 's': do_sanity_check = 0; break; + case 't': + runtime = atoi(optarg); + break; default: - printf("Usage: %s [-s]\n", argv[0]); + printf("Usage: %s [-s] [-t <secs>]\n", argv[0]); printf(" -s: skip sanity checks\n"); + printf(" -t: Number of seconds to run\n"); exit(-1); } } @@ -167,7 +172,7 @@ int main(int argc, char **argv) printf("Running Asynchronous Switching Tests...\n"); pid = fork(); if (!pid) - return run_tests(60); + return run_tests(runtime); while (pid != waitpid(pid, &status, WNOHANG)) for (i = 0; i < count; i++) -- 2.35.1

2 years, 12 months

2
1
0 0

[PATCH 0/9] selftests: timers: fixes and improvements

by Wolfram Sang

The timer selftests are quite useful for me when enabling timers on new SoCs, e.g. like now with the CMT timer on a Renesas R-Car S4-8. During development, I needed these fixes and additions to make full use of the tests. I think they make all sense upstream, so here they are. Patches are based on v5.19-rc1. Looking forward to comments. Happy hacking, Wolfram Wolfram Sang (9): selftests: timers: valid-adjtimex: build fix for newer toolchains selftests: timers: fix declarations of main() selftests: timers: nanosleep: adapt to kselftest framework selftests: timers: inconsistency-check: adapt to kselftest framework selftests: timers: clocksource-switch: fix passing errors from child selftests: timers: clocksource-switch: sort includes selftests: timers: clocksource-switch: add command line switch to skip sanity check selftests: timers: clocksource-switch: add 'runtime' command line parameter selftests: timers: clocksource-switch: adapt to kselftest framework tools/testing/selftests/timers/adjtick.c | 2 +- tools/testing/selftests/timers/change_skew.c | 2 +- .../selftests/timers/clocksource-switch.c | 70 ++++++++++++------- .../selftests/timers/inconsistency-check.c | 32 +++++---- tools/testing/selftests/timers/nanosleep.c | 18 +++-- tools/testing/selftests/timers/raw_skew.c | 2 +- .../selftests/timers/skew_consistency.c | 2 +- .../testing/selftests/timers/valid-adjtimex.c | 2 +- 8 files changed, 80 insertions(+), 50 deletions(-) -- 2.35.1

2 years, 12 months

4
17
0 0

[PATCH] selftests/landlock: drop deprecated headers dependency

by Guillaume Tucker

The khdr make target has been removed, so drop it from the landlock Makefile dependencies as well as related include paths that are standard for headers in the kernel tree. Signed-off-by: Guillaume Tucker <guillaume.tucker(a)collabora.com> Reported-by: Anders Roxell <anders.roxell(a)linaro.org> --- tools/testing/selftests/landlock/Makefile | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/landlock/Makefile b/tools/testing/selftests/landlock/Makefile index 1313e44e8fb9..a6959df28eb0 100644 --- a/tools/testing/selftests/landlock/Makefile +++ b/tools/testing/selftests/landlock/Makefile @@ -11,13 +11,8 @@ TEST_GEN_PROGS_EXTENDED := true OVERRIDE_TARGETS := 1 include ../lib.mk -khdr_dir = $(top_srcdir)/usr/include - -$(khdr_dir)/linux/landlock.h: khdr - @: - $(OUTPUT)/true: true.c $(LINK.c) $< $(LDLIBS) -o $@ -static -$(OUTPUT)/%_test: %_test.c $(khdr_dir)/linux/landlock.h ../kselftest_harness.h common.h - $(LINK.c) $< $(LDLIBS) -o $@ -lcap -I$(khdr_dir) +$(OUTPUT)/%_test: %_test.c ../kselftest_harness.h common.h + $(LINK.c) $< $(LDLIBS) -o $@ -lcap -- 2.30.2

2 years, 12 months

2
1
0 0

[PATCH] tools/testing/selftests/net/bpf/Makefile: fix fatal error: 'bpf/bpf_helpers.h' file not found

by Jie2x Zhou

In tools/testing/selftests run: make -C bpf make -C net fatal error: 'bpf/bpf_helpers.h' file not found Add bpf/bpf_helpers.h include path in net/bpf/Makefile. Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Jie2x Zhou <jie2x.zhou(a)intel.com> --- tools/testing/selftests/net/bpf/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/net/bpf/Makefile b/tools/testing/selftests/net/bpf/Makefile index 8ccaf8732eb2..07d56d446358 100644 --- a/tools/testing/selftests/net/bpf/Makefile +++ b/tools/testing/selftests/net/bpf/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 CLANG ?= clang +CCINCLUDE += -I../bpf/tools/include CCINCLUDE += -I../../bpf CCINCLUDE += -I../../../../lib CCINCLUDE += -I../../../../../usr/include/ -- 2.36.1

2 years, 12 months

2
1
0 0

[PATCH] selftests/kcmp: Make the test output consistent and clear

by Gautam Menghani

Make the output format of this test consistent. Currently the output is as follows: +TAP version 13 +1..1 +# selftests: kcmp: kcmp_test +# pid1: 45814 pid2: 45815 FD: 1 FILES: 1 VM: 2 FS: 1 SIGHAND: 2 + IO: 0 SYSVSEM: 0 INV: -1 +# PASS: 0 returned as expected +# PASS: 0 returned as expected +# PASS: 0 returned as expected +# # Planned tests != run tests (0 != 3) +# # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 +# # Planned tests != run tests (0 != 3) +# # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 +# # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0 +ok 1 selftests: kcmp: kcmp_test With this patch applied the output is as follows: +TAP version 13 +1..1 +# selftests: kcmp: kcmp_test +# TAP version 13 +# 1..3 +# pid1: 46330 pid2: 46331 FD: 1 FILES: 2 VM: 2 FS: 2 SIGHAND: 1 + IO: 0 SYSVSEM: 0 INV: -1 +# PASS: 0 returned as expected +# PASS: 0 returned as expected +# PASS: 0 returned as expected +# # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 +ok 1 selftests: kcmp: kcmp_test Signed-off-by: Gautam Menghani <gautammenghani201(a)gmail.com> --- tools/testing/selftests/kcmp/kcmp_test.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kcmp/kcmp_test.c b/tools/testing/selftests/kcmp/kcmp_test.c index 6ea7b9f37a41..25110c7c0b3e 100644 --- a/tools/testing/selftests/kcmp/kcmp_test.c +++ b/tools/testing/selftests/kcmp/kcmp_test.c @@ -88,6 +88,9 @@ int main(int argc, char **argv) int pid2 = getpid(); int ret; + ksft_print_header(); + ksft_set_plan(3); + fd2 = open(kpath, O_RDWR, 0644); if (fd2 < 0) { perror("Can't open file"); @@ -152,7 +155,6 @@ int main(int argc, char **argv) ksft_inc_pass_cnt(); } - ksft_print_cnts(); if (ret) ksft_exit_fail(); @@ -162,5 +164,5 @@ int main(int argc, char **argv) waitpid(pid2, &status, P_ALL); - return ksft_exit_pass(); + return 0; } -- 2.36.1

2 years, 12 months

2
3
0 0

[PATCH] proc: fix test for "vsyscall=xonly" boot option

by Alexey Dobriyan

Booting with vsyscall=xonly results in the "--xp" vsyscall VMA: ffffffffff600000-ffffffffff601000 --xp ... [vsyscall]\n Test does read from fixed vsyscall address to determine if kernel supports vsyscall page but it doesn't work with vsyscall=xonly because, well, vsyscall page is execute only. Fix test by trying to execute from the first byte of the page (which contains gettimeofday() stub). This should work because vsyscall entry points themselves have stable addresses by design. Alexey, avoiding parsing .config, /proc/config.gz and /proc/cmdline at all costs. Signed-off-by: Alexey Dobriyan <adobriyan(a)gmail.com> --- I'm not sure who reported what, so please add tested-by and reported-by lines. tools/testing/selftests/proc/proc-pid-vm.c | 75 ++++++++++++++++++++++++++--- 1 file changed, 68 insertions(+), 7 deletions(-) --- a/tools/testing/selftests/proc/proc-pid-vm.c +++ b/tools/testing/selftests/proc/proc-pid-vm.c @@ -211,10 +211,19 @@ static int make_exe(const uint8_t *payload, size_t len) } #endif -static bool g_vsyscall = false; +/* + * 0: vsyscall VMA doesn't exist vsyscall=none + * 1: vsyscall VMA is r-xp vsyscall=emulate + * 2: vsyscall VMA is --xp vsyscall=xonly + */ +static int g_vsyscall; +static const char *str_vsyscall; -static const char str_vsyscall[] = +static const char str_vsyscall_0[] = ""; +static const char str_vsyscall_1[] = "ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]\n"; +static const char str_vsyscall_2[] = +"ffffffffff600000-ffffffffff601000 --xp 00000000 00:00 0 [vsyscall]\n"; #ifdef __x86_64__ static void sigaction_SIGSEGV(int _, siginfo_t *__, void *___) @@ -223,13 +232,47 @@ static void sigaction_SIGSEGV(int _, siginfo_t *__, void *___) } /* - * vsyscall page can't be unmapped, probe it with memory load. + * vsyscall page can't be unmapped, probe it directly. */ static void vsyscall(void) { pid_t pid; int wstatus; + pid = fork(); + if (pid < 0) { + fprintf(stderr, "fork, errno %d\n", errno); + exit(1); + } + if (pid == 0) { + struct rlimit rlim = {0, 0}; + (void)setrlimit(RLIMIT_CORE, &rlim); + + /* Hide "segfault at ffffffffff600000" messages. */ + struct sigaction act; + memset(&act, 0, sizeof(struct sigaction)); + act.sa_flags = SA_SIGINFO; + act.sa_sigaction = sigaction_SIGSEGV; + (void)sigaction(SIGSEGV, &act, NULL); + + /* gettimeofday(NULL, NULL); */ + asm volatile ( + "call %P0" + : + : "i" (0xffffffffff600000), "D" (NULL), "S" (NULL) + : "rax" + ); + exit(0); + } + waitpid(pid, &wstatus, 0); + if (WIFEXITED(wstatus) && WEXITSTATUS(wstatus) == 0) { + /* vsyscall page exists and is executable. */ + } else { + /* vsyscall page doesn't exist. */ + g_vsyscall = 0; + return; + } + pid = fork(); if (pid < 0) { fprintf(stderr, "fork, errno %d\n", errno); @@ -251,8 +294,13 @@ static void vsyscall(void) } waitpid(pid, &wstatus, 0); if (WIFEXITED(wstatus) && WEXITSTATUS(wstatus) == 0) { - g_vsyscall = true; + /* vsyscall page is readable and executable. */ + g_vsyscall = 1; + return; } + + /* vsyscall page is executable but unreadable. */ + g_vsyscall = 2; } int main(void) @@ -261,6 +309,19 @@ int main(void) int exec_fd; vsyscall(); + switch (g_vsyscall) { + case 0: + str_vsyscall = str_vsyscall_0; + break; + case 1: + str_vsyscall = str_vsyscall_1; + break; + case 2: + str_vsyscall = str_vsyscall_2; + break; + default: + abort(); + } atexit(ate); @@ -314,7 +375,7 @@ int main(void) /* Test /proc/$PID/maps */ { - const size_t len = strlen(buf0) + (g_vsyscall ? strlen(str_vsyscall) : 0); + const size_t len = strlen(buf0) + strlen(str_vsyscall); char buf[256]; ssize_t rv; int fd; @@ -327,7 +388,7 @@ int main(void) rv = read(fd, buf, sizeof(buf)); assert(rv == len); assert(memcmp(buf, buf0, strlen(buf0)) == 0); - if (g_vsyscall) { + if (g_vsyscall > 0) { assert(memcmp(buf + strlen(buf0), str_vsyscall, strlen(str_vsyscall)) == 0); } } @@ -374,7 +435,7 @@ int main(void) assert(memmem(buf, rv, S[i], strlen(S[i]))); } - if (g_vsyscall) { + if (g_vsyscall > 0) { assert(memmem(buf, rv, str_vsyscall, strlen(str_vsyscall))); } }

2 years, 12 months

2
2
0 0

[PATCH net v3 1/2] ip: fix dflt addr selection for connected nexthop

by Nicolas Dichtel

When a nexthop is added, without a gw address, the default scope was set to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen but rejected when the route is used. When using a route without a nexthop id, the scope can be configured in the route, thus the problem doesn't exist. To explain more deeply: when a user creates a nexthop, it cannot specify the scope. To create it, the function nh_create_ipv4() calls fib_check_nh() with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was setting scope to 'host'. Then, nh_create_ipv4() calls fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is chosen before the route is inserted. When a 'standard' route (ie without a reference to a nexthop) is added, fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by the user. iproute2 set the scope to 'link' by default. Here is a way to reproduce the problem: ip netns add foo ip -n foo link set lo up ip netns add bar ip -n bar link set lo up sleep 1 ip -n foo link add name eth0 type dummy ip -n foo link set eth0 up ip -n foo address add 192.168.0.1/24 dev eth0 ip -n foo link add name veth0 type veth peer name veth1 netns bar ip -n foo link set veth0 up ip -n bar link set veth1 up ip -n bar address add 192.168.1.1/32 dev veth1 ip -n bar route add default dev veth1 ip -n foo nexthop add id 1 dev veth0 ip -n foo route add 192.168.1.1 nhid 1 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > RTNETLINK answers: Invalid argument > $ ip netns exec foo ping -c1 192.168.1.1 > ping: connect: Invalid argument Try without nexthop group (iproute2 sets scope to 'link' by dflt): ip -n foo route del 192.168.1.1 ip -n foo route add 192.168.1.1 dev veth0 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > 192.168.1.1 dev veth0 src 192.168.0.1 uid 0 > cache > $ ip netns exec foo ping -c1 192.168.1.1 > PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. > 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms > > --- 192.168.1.1 ping statistics --- > 1 packets transmitted, 1 received, 0% packet loss, time 0ms > rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms CC: stable(a)vger.kernel.org Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops") Reported-by: Edwin Brossette <edwin.brossette(a)6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel(a)6wind.com> --- v2 -> v3: - no change v1 -> v2: - remove useless arp off / fixed mac settings in the description net/ipv4/fib_semantics.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index a57ba23571c9..20177ecf5bdd 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -1230,7 +1230,7 @@ static int fib_check_nh_nongw(struct net *net, struct fib_nh *nh, nh->fib_nh_dev = in_dev->dev; dev_hold_track(nh->fib_nh_dev, &nh->fib_nh_dev_tracker, GFP_ATOMIC); - nh->fib_nh_scope = RT_SCOPE_HOST; + nh->fib_nh_scope = RT_SCOPE_LINK; if (!netif_carrier_ok(nh->fib_nh_dev)) nh->fib_nh_flags |= RTNH_F_LINKDOWN; err = 0; -- 2.33.0

2 years, 12 months

2
2
0 0

Get back to me... URGENT

by Abdwabbo Maddah

-- Dear, I had sent you a mail but i don't think you received it that's why am writing you again.It is important you get back to me as soon as you can. Abd-Wabbo Maddah

2 years, 12 months

1
0
0 0

[PATCH bpf-next] selftests/bpf: Return true/false (not 1/0) from bool functions

by xiaolinkui

From: Linkui Xiao <xiaolinkui(a)kylinos.cn> Return boolean values ("true" or "false") instead of 1 or 0 from bool functions. This fixes the following warnings from coccicheck: tools/testing/selftests/bpf/progs/test_xdp_noinline.c:407:9-10: WARNING: return of 0/1 in function 'decap_v4' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:389:9-10: WARNING: return of 0/1 in function 'decap_v6' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:290:9-10: WARNING: return of 0/1 in function 'encap_v6' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:264:9-10: WARNING: return of 0/1 in function 'parse_tcp' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:242:9-10: WARNING: return of 0/1 in function 'parse_udp' with return type bool Generated by: scripts/coccinelle/misc/boolreturn.cocci Signed-off-by: Linkui Xiao <xiaolinkui(a)kylinos.cn> Suggested-by: Stanislav Fomichev <sdf(a)google.com> --- .../selftests/bpf/progs/test_xdp_noinline.c | 30 +++++++++---------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/test_xdp_noinline.c b/tools/testing/selftests/bpf/progs/test_xdp_noinline.c index 125d872d7981..ba48fcb98ab2 100644 --- a/tools/testing/selftests/bpf/progs/test_xdp_noinline.c +++ b/tools/testing/selftests/bpf/progs/test_xdp_noinline.c @@ -239,7 +239,7 @@ bool parse_udp(void *data, void *data_end, udp = data + off; if (udp + 1 > data_end) - return 0; + return false; if (!is_icmp) { pckt->flow.port16[0] = udp->source; pckt->flow.port16[1] = udp->dest; @@ -247,7 +247,7 @@ bool parse_udp(void *data, void *data_end, pckt->flow.port16[0] = udp->dest; pckt->flow.port16[1] = udp->source; } - return 1; + return true; } static __attribute__ ((noinline)) @@ -261,7 +261,7 @@ bool parse_tcp(void *data, void *data_end, tcp = data + off; if (tcp + 1 > data_end) - return 0; + return false; if (tcp->syn) pckt->flags |= (1 << 1); if (!is_icmp) { @@ -271,7 +271,7 @@ bool parse_tcp(void *data, void *data_end, pckt->flow.port16[0] = tcp->dest; pckt->flow.port16[1] = tcp->source; } - return 1; + return true; } static __attribute__ ((noinline)) @@ -287,7 +287,7 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval, void *data; if (bpf_xdp_adjust_head(xdp, 0 - (int)sizeof(struct ipv6hdr))) - return 0; + return false; data = (void *)(long)xdp->data; data_end = (void *)(long)xdp->data_end; new_eth = data; @@ -295,7 +295,7 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval, old_eth = data + sizeof(struct ipv6hdr); if (new_eth + 1 > data_end || old_eth + 1 > data_end || ip6h + 1 > data_end) - return 0; + return false; memcpy(new_eth->eth_dest, cval->mac, 6); memcpy(new_eth->eth_source, old_eth->eth_dest, 6); new_eth->eth_proto = 56710; @@ -314,7 +314,7 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval, ip6h->saddr.in6_u.u6_addr32[2] = 3; ip6h->saddr.in6_u.u6_addr32[3] = ip_suffix; memcpy(ip6h->daddr.in6_u.u6_addr32, dst->dstv6, 16); - return 1; + return true; } static __attribute__ ((noinline)) @@ -335,7 +335,7 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval, ip_suffix <<= 15; ip_suffix ^= pckt->flow.src; if (bpf_xdp_adjust_head(xdp, 0 - (int)sizeof(struct iphdr))) - return 0; + return false; data = (void *)(long)xdp->data; data_end = (void *)(long)xdp->data_end; new_eth = data; @@ -343,7 +343,7 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval, old_eth = data + sizeof(struct iphdr); if (new_eth + 1 > data_end || old_eth + 1 > data_end || iph + 1 > data_end) - return 0; + return false; memcpy(new_eth->eth_dest, cval->mac, 6); memcpy(new_eth->eth_source, old_eth->eth_dest, 6); new_eth->eth_proto = 8; @@ -367,8 +367,8 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval, csum += *next_iph_u16++; iph->check = ~((csum & 0xffff) + (csum >> 16)); if (bpf_xdp_adjust_head(xdp, (int)sizeof(struct iphdr))) - return 0; - return 1; + return false; + return true; } static __attribute__ ((noinline)) @@ -386,10 +386,10 @@ bool decap_v6(struct xdp_md *xdp, void **data, void **data_end, bool inner_v4) else new_eth->eth_proto = 56710; if (bpf_xdp_adjust_head(xdp, (int)sizeof(struct ipv6hdr))) - return 0; + return false; *data = (void *)(long)xdp->data; *data_end = (void *)(long)xdp->data_end; - return 1; + return true; } static __attribute__ ((noinline)) @@ -404,10 +404,10 @@ bool decap_v4(struct xdp_md *xdp, void **data, void **data_end) memcpy(new_eth->eth_dest, old_eth->eth_dest, 6); new_eth->eth_proto = 8; if (bpf_xdp_adjust_head(xdp, (int)sizeof(struct iphdr))) - return 0; + return false; *data = (void *)(long)xdp->data; *data_end = (void *)(long)xdp->data_end; - return 1; + return true; } static __attribute__ ((noinline)) -- 2.17.1

2 years, 12 months

4
3
0 0

[PATCH AUTOSEL 5.18 40/41] wireguard: selftests: always call kernel makefile

by Sasha Levin

From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> [ Upstream commit 1a087eec257154e26a81a7a0a15380d7a2431765 ] These selftests are used for much more extensive changes than just the wireguard source files. So always call the kernel's build file, which will do something or nothing after checking the whole tree, per usual. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/wireguard/qemu/Makefile | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/wireguard/qemu/Makefile b/tools/testing/selftests/wireguard/qemu/Makefile index e8a82e495d2e..fcc3f668b807 100644 --- a/tools/testing/selftests/wireguard/qemu/Makefile +++ b/tools/testing/selftests/wireguard/qemu/Makefile @@ -19,8 +19,6 @@ endif MIRROR := https://download.wireguard.com/qemu-test/distfiles/ KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug) -rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d)) -WIREGUARD_SOURCES := $(call rwildcard,$(KERNEL_PATH)/drivers/net/wireguard/,*) default: qemu @@ -325,8 +323,9 @@ $(KERNEL_BUILD_PATH)/.config: $(TOOLCHAIN_PATH)/.installed kernel.config arch/$( cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config $(KERNEL_BUILD_PATH)/minimal.config $(if $(findstring yes,$(DEBUG_KERNEL)),cp debug.config $(KERNEL_BUILD_PATH) && cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config debug.config,) -$(KERNEL_BZIMAGE): $(TOOLCHAIN_PATH)/.installed $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES) +$(KERNEL_BZIMAGE): $(TOOLCHAIN_PATH)/.installed $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init $(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) +.PHONY: $(KERNEL_BZIMAGE) $(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config $(TOOLCHAIN_PATH)/.installed rm -rf $(TOOLCHAIN_PATH)/$(CHOST)/include/linux -- 2.35.1

2 years, 12 months

1
0
0 0

[PATCH AUTOSEL 5.18 38/41] wireguard: selftests: set fake real time in init

by Sasha Levin

From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> [ Upstream commit 829be057dbc1e71383b8d7de8edb31dcf07b4aa0 ] Not all platforms have an RTC, and rather than trying to force one into each, it's much easier to just set a fixed time. This is necessary because WireGuard's latest handshakes parameter is returned in wallclock time, and if the system time isn't set, and the system is really fast, then this returns 0, which trips the test. Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl doesn't support settimeofday without it. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../testing/selftests/wireguard/qemu/arch/arm.config | 1 + .../selftests/wireguard/qemu/arch/armeb.config | 1 + .../testing/selftests/wireguard/qemu/arch/i686.config | 1 + .../testing/selftests/wireguard/qemu/arch/m68k.config | 1 + .../testing/selftests/wireguard/qemu/arch/mips.config | 1 + .../selftests/wireguard/qemu/arch/mipsel.config | 1 + .../selftests/wireguard/qemu/arch/powerpc.config | 1 + tools/testing/selftests/wireguard/qemu/init.c | 11 +++++++++++ 8 files changed, 18 insertions(+) diff --git a/tools/testing/selftests/wireguard/qemu/arch/arm.config b/tools/testing/selftests/wireguard/qemu/arch/arm.config index fc7959bef9c2..0579c66be83e 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/arm.config +++ b/tools/testing/selftests/wireguard/qemu/arch/arm.config @@ -7,6 +7,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_VIRTIO_MENU=y CONFIG_VIRTIO_MMIO=y CONFIG_VIRTIO_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1" CONFIG_FRAME_WARN=1024 diff --git a/tools/testing/selftests/wireguard/qemu/arch/armeb.config b/tools/testing/selftests/wireguard/qemu/arch/armeb.config index f3066be81c19..2a3307bbe534 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/armeb.config +++ b/tools/testing/selftests/wireguard/qemu/arch/armeb.config @@ -7,6 +7,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_VIRTIO_MENU=y CONFIG_VIRTIO_MMIO=y CONFIG_VIRTIO_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1" CONFIG_CPU_BIG_ENDIAN=y diff --git a/tools/testing/selftests/wireguard/qemu/arch/i686.config b/tools/testing/selftests/wireguard/qemu/arch/i686.config index 6d90892a85a2..cd864b9be6fb 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/i686.config +++ b/tools/testing/selftests/wireguard/qemu/arch/i686.config @@ -1,6 +1,7 @@ CONFIG_ACPI=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1" CONFIG_FRAME_WARN=1024 diff --git a/tools/testing/selftests/wireguard/qemu/arch/m68k.config b/tools/testing/selftests/wireguard/qemu/arch/m68k.config index 82c925e49beb..9639bfe06074 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/m68k.config +++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config @@ -5,5 +5,6 @@ CONFIG_MAC=y CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_TTYS=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1" CONFIG_FRAME_WARN=1024 diff --git a/tools/testing/selftests/wireguard/qemu/arch/mips.config b/tools/testing/selftests/wireguard/qemu/arch/mips.config index d7ec63c17b30..2a84402353ab 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/mips.config +++ b/tools/testing/selftests/wireguard/qemu/arch/mips.config @@ -6,6 +6,7 @@ CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1" CONFIG_FRAME_WARN=1024 diff --git a/tools/testing/selftests/wireguard/qemu/arch/mipsel.config b/tools/testing/selftests/wireguard/qemu/arch/mipsel.config index 18a498293737..56146a101e7e 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/mipsel.config +++ b/tools/testing/selftests/wireguard/qemu/arch/mipsel.config @@ -7,6 +7,7 @@ CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1" CONFIG_FRAME_WARN=1024 diff --git a/tools/testing/selftests/wireguard/qemu/arch/powerpc.config b/tools/testing/selftests/wireguard/qemu/arch/powerpc.config index 5e04882e8e35..174a9ffe2a36 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/powerpc.config +++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc.config @@ -4,6 +4,7 @@ CONFIG_PPC_85xx=y CONFIG_PHYS_64BIT=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_MATH_EMULATION=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1" diff --git a/tools/testing/selftests/wireguard/qemu/init.c b/tools/testing/selftests/wireguard/qemu/init.c index 2a0f48fac925..542c34b00eb0 100644 --- a/tools/testing/selftests/wireguard/qemu/init.c +++ b/tools/testing/selftests/wireguard/qemu/init.c @@ -11,6 +11,7 @@ #include <stdlib.h> #include <stdbool.h> #include <fcntl.h> +#include <time.h> #include <sys/wait.h> #include <sys/mount.h> #include <sys/stat.h> @@ -67,6 +68,15 @@ static void seed_rng(void) close(fd); } +static void set_time(void) +{ + if (time(NULL)) + return; + pretty_message("[+] Setting fake time..."); + if (stime(&(time_t){1433512680}) < 0) + panic("settimeofday()"); +} + static void mount_filesystems(void) { pretty_message("[+] Mounting filesystems..."); @@ -256,6 +266,7 @@ int main(int argc, char *argv[]) print_banner(); mount_filesystems(); seed_rng(); + set_time(); kmod_selftests(); enable_logging(); clear_leaks(); -- 2.35.1

2 years, 12 months

1
0
0 0

[PATCH] selftests/bpf: Return true/false (not 1/0) from bool functions

by xiaolinkui

From: Linkui Xiao<xiaolinkui(a)kylinos.cn> Return boolean values ("true" or "false") instead of 1 or 0 from bool functions. This fixes the following warnings from coccicheck: tools/testing/selftests/bpf/progs/test_xdp_noinline.c:407:9-10: WARNING: return of 0/1 in function 'decap_v4' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:389:9-10: WARNING: return of 0/1 in function 'decap_v6' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:290:9-10: WARNING: return of 0/1 in function 'encap_v6' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:264:9-10: WARNING: return of 0/1 in function 'parse_tcp' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:242:9-10: WARNING: return of 0/1 in function 'parse_udp' with return type bool Generated by: scripts/coccinelle/misc/boolreturn.cocci Signed-off-by: Linkui Xiao<xiaolinkui(a)kylinos.cn> --- .../selftests/bpf/progs/test_xdp_noinline.c | 30 +++++++++---------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/test_xdp_noinline.c b/tools/testing/selftests/bpf/progs/test_xdp_noinline.c index 125d872d7981..ba48fcb98ab2 100644 --- a/tools/testing/selftests/bpf/progs/test_xdp_noinline.c +++ b/tools/testing/selftests/bpf/progs/test_xdp_noinline.c @@ -239,7 +239,7 @@ bool parse_udp(void *data, void *data_end, udp = data + off; if (udp + 1 > data_end) - return 0; + return false; if (!is_icmp) { pckt->flow.port16[0] = udp->source; pckt->flow.port16[1] = udp->dest; @@ -247,7 +247,7 @@ bool parse_udp(void *data, void *data_end, pckt->flow.port16[0] = udp->dest; pckt->flow.port16[1] = udp->source; } - return 1; + return true; } static __attribute__ ((noinline)) @@ -261,7 +261,7 @@ bool parse_tcp(void *data, void *data_end, tcp = data + off; if (tcp + 1 > data_end) - return 0; + return false; if (tcp->syn) pckt->flags |= (1 << 1); if (!is_icmp) { @@ -271,7 +271,7 @@ bool parse_tcp(void *data, void *data_end, pckt->flow.port16[0] = tcp->dest; pckt->flow.port16[1] = tcp->source; } - return 1; + return true; } static __attribute__ ((noinline)) @@ -287,7 +287,7 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval, void *data; if (bpf_xdp_adjust_head(xdp, 0 - (int)sizeof(struct ipv6hdr))) - return 0; + return false; data = (void *)(long)xdp->data; data_end = (void *)(long)xdp->data_end; new_eth = data; @@ -295,7 +295,7 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval, old_eth = data + sizeof(struct ipv6hdr); if (new_eth + 1 > data_end || old_eth + 1 > data_end || ip6h + 1 > data_end) - return 0; + return false; memcpy(new_eth->eth_dest, cval->mac, 6); memcpy(new_eth->eth_source, old_eth->eth_dest, 6); new_eth->eth_proto = 56710; @@ -314,7 +314,7 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval, ip6h->saddr.in6_u.u6_addr32[2] = 3; ip6h->saddr.in6_u.u6_addr32[3] = ip_suffix; memcpy(ip6h->daddr.in6_u.u6_addr32, dst->dstv6, 16); - return 1; + return true; } static __attribute__ ((noinline)) @@ -335,7 +335,7 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval, ip_suffix <<= 15; ip_suffix ^= pckt->flow.src; if (bpf_xdp_adjust_head(xdp, 0 - (int)sizeof(struct iphdr))) - return 0; + return false; data = (void *)(long)xdp->data; data_end = (void *)(long)xdp->data_end; new_eth = data; @@ -343,7 +343,7 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval, old_eth = data + sizeof(struct iphdr); if (new_eth + 1 > data_end || old_eth + 1 > data_end || iph + 1 > data_end) - return 0; + return false; memcpy(new_eth->eth_dest, cval->mac, 6); memcpy(new_eth->eth_source, old_eth->eth_dest, 6); new_eth->eth_proto = 8; @@ -367,8 +367,8 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval, csum += *next_iph_u16++; iph->check = ~((csum & 0xffff) + (csum >> 16)); if (bpf_xdp_adjust_head(xdp, (int)sizeof(struct iphdr))) - return 0; - return 1; + return false; + return true; } static __attribute__ ((noinline)) @@ -386,10 +386,10 @@ bool decap_v6(struct xdp_md *xdp, void **data, void **data_end, bool inner_v4) else new_eth->eth_proto = 56710; if (bpf_xdp_adjust_head(xdp, (int)sizeof(struct ipv6hdr))) - return 0; + return false; *data = (void *)(long)xdp->data; *data_end = (void *)(long)xdp->data_end; - return 1; + return true; } static __attribute__ ((noinline)) @@ -404,10 +404,10 @@ bool decap_v4(struct xdp_md *xdp, void **data, void **data_end) memcpy(new_eth->eth_dest, old_eth->eth_dest, 6); new_eth->eth_proto = 8; if (bpf_xdp_adjust_head(xdp, (int)sizeof(struct iphdr))) - return 0; + return false; *data = (void *)(long)xdp->data; *data_end = (void *)(long)xdp->data_end; - return 1; + return true; } static __attribute__ ((noinline)) -- 2.17.1

2 years, 12 months

3
2
0 0

[PATCH net v2 1/2] ip: fix dflt addr selection for connected nexthop

by Nicolas Dichtel

When a nexthop is added, without a gw address, the default scope was set to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen but rejected when the route is used. When using a route without a nexthop id, the scope can be configured in the route, thus the problem doesn't exist. To explain more deeply: when a user creates a nexthop, it cannot specify the scope. To create it, the function nh_create_ipv4() calls fib_check_nh() with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was setting scope to 'host'. Then, nh_create_ipv4() calls fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is chosen before the route is inserted. When a 'standard' route (ie without a reference to a nexthop) is added, fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by the user. iproute2 set the scope to 'link' by default. Here is a way to reproduce the problem: ip netns add foo ip -n foo link set lo up ip netns add bar ip -n bar link set lo up sleep 1 ip -n foo link add name eth0 type dummy ip -n foo link set eth0 up ip -n foo address add 192.168.0.1/24 dev eth0 ip -n foo link add name veth0 type veth peer name veth1 netns bar ip -n foo link set veth0 up ip -n bar link set veth1 up ip -n bar address add 192.168.1.1/32 dev veth1 ip -n bar route add default dev veth1 ip -n foo nexthop add id 1 dev veth0 ip -n foo route add 192.168.1.1 nhid 1 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > RTNETLINK answers: Invalid argument > $ ip netns exec foo ping -c1 192.168.1.1 > ping: connect: Invalid argument Try without nexthop group (iproute2 sets scope to 'link' by dflt): ip -n foo route del 192.168.1.1 ip -n foo route add 192.168.1.1 dev veth0 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > 192.168.1.1 dev veth0 src 192.168.0.1 uid 0 > cache > $ ip netns exec foo ping -c1 192.168.1.1 > PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. > 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms > > --- 192.168.1.1 ping statistics --- > 1 packets transmitted, 1 received, 0% packet loss, time 0ms > rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms CC: stable(a)vger.kernel.org Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops") Reported-by: Edwin Brossette <edwin.brossette(a)6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel(a)6wind.com> --- v1 -> v2: - remove useless arp off / fixed mac settings in the description net/ipv4/fib_semantics.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index a57ba23571c9..20177ecf5bdd 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -1230,7 +1230,7 @@ static int fib_check_nh_nongw(struct net *net, struct fib_nh *nh, nh->fib_nh_dev = in_dev->dev; dev_hold_track(nh->fib_nh_dev, &nh->fib_nh_dev_tracker, GFP_ATOMIC); - nh->fib_nh_scope = RT_SCOPE_HOST; + nh->fib_nh_scope = RT_SCOPE_LINK; if (!netif_carrier_ok(nh->fib_nh_dev)) nh->fib_nh_flags |= RTNH_F_LINKDOWN; err = 0; -- 2.33.0

2 years, 12 months

3
6
0 0

[PATCH v2 0/4] Fix kselftest build with sub-directory

by Guillaume Tucker

Earlier attempts to get "make O=build kselftest-all" to work were not successful as they made undesirable changes to some functions in the top-level Makefile. This series takes a different approach by removing the root cause of the problem within kselftest, which is when the sub-Makefile tries to install kernel headers "backwards" by calling make with the top-level Makefile. The actual issue comes from the fact that $(srctree) is ".." when building in a sub-directory with "O=build" which then obviously makes "-C $(top_srcdir)" point outside of the real source tree. With this series, the generic kselftest targets work as expected from the top level with or without a build directory e.g.: $ make kselftest-all $ make O=build kselftest-all Then in order to build using the sub-Makefile explicitly, the headers have to be installed first. This is arguably a valid requirement to have when building a tool from a sub-Makefile. For example, "make -C tools/testing/nvdimm/" fails in a similar way until <asm/rwonce.h> has been generated by a kernel build. v2: replace headers_install with headers Guillaume Tucker (4): selftests: drop khdr make target selftests: stop using KSFT_KHDR_INSTALL selftests: drop KSFT_KHDR_INSTALL make target Makefile: add headers to kselftest targets Makefile | 4 +- tools/testing/selftests/Makefile | 28 +------------- tools/testing/selftests/arm64/mte/Makefile | 1 - tools/testing/selftests/arm64/signal/Makefile | 1 - .../selftests/arm64/signal/test_signals.h | 4 +- .../selftests/drivers/s390x/uvdevice/Makefile | 1 - .../selftests/futex/functional/Makefile | 1 - tools/testing/selftests/kvm/Makefile | 1 - tools/testing/selftests/landlock/Makefile | 1 - tools/testing/selftests/lib.mk | 38 ------------------- tools/testing/selftests/net/Makefile | 1 - tools/testing/selftests/net/mptcp/Makefile | 1 - tools/testing/selftests/tc-testing/Makefile | 1 - tools/testing/selftests/vm/Makefile | 1 - 14 files changed, 5 insertions(+), 79 deletions(-) -- 2.30.2

2 years, 12 months

4
9
0 0

[PATCH 0/4] Fix kselftest build with sub-directory

by Guillaume Tucker

Earlier attempts to get "make O=build kselftest-all" to work were not successful as they made undesirable changes to some functions in the top-level Makefile. This series takes a different approach by removing the root cause of the problem within kselftest, which is when the sub-Makefile tries to install kernel headers "backwards" by calling make with the top-level Makefile. The actual issue comes from the fact that $(srctree) is ".." when building in a sub-directory with "O=build" which then obviously makes "-C $(top_srcdir)" point outside of the real source tree. With this series, the generic kselftest targets work as expected from the top level with or without a build directory e.g.: $ make kselftest-all $ make O=build kselftest-all Then in order to build using the sub-Makefile explicitly, the headers have to be installed first. This is arguably a valid requirement to have when building a tool from a sub-Makefile. For example, "make -C tools/testing/nvdimm/" fails in a similar way until <asm/rwonce.h> has been generated by a kernel build. Guillaume Tucker (4): selftests: drop khdr make target selftests: stop using KSFT_KHDR_INSTALL selftests: drop KSFT_KHDR_INSTALL make target Makefile: add headers_install to kselftest targets Makefile | 4 +- tools/testing/selftests/Makefile | 28 +------------- tools/testing/selftests/arm64/mte/Makefile | 1 - tools/testing/selftests/arm64/signal/Makefile | 1 - .../selftests/arm64/signal/test_signals.h | 4 +- .../selftests/drivers/s390x/uvdevice/Makefile | 1 - .../selftests/futex/functional/Makefile | 1 - tools/testing/selftests/kvm/Makefile | 1 - tools/testing/selftests/landlock/Makefile | 1 - tools/testing/selftests/lib.mk | 38 ------------------- tools/testing/selftests/net/Makefile | 1 - tools/testing/selftests/net/mptcp/Makefile | 1 - tools/testing/selftests/tc-testing/Makefile | 1 - tools/testing/selftests/vm/Makefile | 1 - 14 files changed, 5 insertions(+), 79 deletions(-) -- 2.30.2

2 years, 12 months

5
11
0 0

[PATCH v7 0/7] bpf: Add bpf_verify_pkcs7_signature() helper

by Roberto Sassu

One of the desirable features in security is the ability to restrict import of data to a given system based on data authenticity. If data import can be restricted, it would be possible to enforce a system-wide policy based on the signing keys the system owner trusts. This feature is widely used in the kernel. For example, if the restriction is enabled, kernel modules can be plugged in only if they are signed with a key whose public part is in the primary or secondary keyring. For eBPF, it can be useful as well. For example, it might be useful to authenticate data an eBPF program makes security decisions on. After a discussion in the eBPF mailing list, it was decided that the stated goal should be accomplished by introducing a new helper: bpf_verify_pkcs7_signature(), dedicated to verify PKCS#7 signatures. Other than the data and the signature, the helper also receives two parameters for the keyring, which can be provided as alternatives: one is a key pointer returned by the new bpf_lookup_user_key() helper, called with a key serial possibly decided by the user; another is a pre-determined ID among values defined in include/linux/verification.h. While the first keyring-related parameter provides great flexibility, it seems suboptimal in terms of security guarantees, as even if the eBPF program is assumed to be trusted, the serial used to obtain the key pointer might come from untrusted user space not choosing one that the system administrator approves to enforce a mandatory policy. The second keyring-related parameter instead provides much stronger guarantees, especially if the pre-determined ID is not passed by user space but is hardcoded in the eBPF program, and that program is signed. In this case, bpf_verify_pkcs7_signature() will always perform signature verification with a key that the system administrator approves, i.e. the primary, secondary or platform keyring. bpf_lookup_user_key() comes with the corresponding release helper bpf_key_put(), to decrement the reference count of the key found with the former helper. The eBPF verifier has been enhanced to ensure that the release helper is always called whenever the acquire helper is called, or otherwise refuses to load the program. bpf_lookup_user_key() also accepts lookup-specific flags KEY_LOOKUP_CREATE and KEY_LOOKUP_PARTIAL. Although these are most likely not useful for the bpf_verify_pkcs7_signature(), newly defined flags could be. bpf_lookup_user_key() does not request a particular permission to lookup_user_key(), as it cannot determine it by itself. Also, it should not get it from the user, as the user could pass an arbitrary value and use the key for a different purpose. Instead, bpf_lookup_user_key() requests KEY_DEFER_PERM_CHECK, and defers the permission check to the helper that actually uses the key, in this patch set to bpf_verify_pkcs7_signature(). Since key_task_permission() is called by the PKCS#7 code during signature verification, the only additional function bpf_verify_pkcs7_signature() has to call is key_validate(). With that, the permission check can be considered complete and equivalent, as it was done by bpf_lookup_user_key() with the appropriate permission (in this case KEY_NEED_SEARCH). All helpers can be called only from sleepable programs, because of memory allocation (with lookup flag KEY_LOOKUP_CREATE) and crypto operations. For example, the lsm.s/bpf attach point is suitable, fexit/array_map_update_elem is not. The correctness of implementation of the new helpers and of their usage is checked with the introduced tests. The patch set is organized as follows. Patch 1 exports bpf_dynptr_get_size(), to obtain the real size of data carried by a dynamic pointer. Patch 2 makes available for new eBPF helpers some key-related definitions. Patch 3 introduces the bpf_lookup_user_key() and bpf_key_put() helpers. Patch 4 introduces the bpf_verify_pkcs7_signature(). Finally, patches 5-7 introduce the tests. Changelog v6: - Switch back to key lookup helpers + signature verification (until v5), and defer permission check from bpf_lookup_user_key() to bpf_verify_pkcs7_signature() - Add additional key lookup test to illustrate the usage of the KEY_LOOKUP_CREATE flag and validate the flags (suggested by Daniel) - Make description of flags of bpf_lookup_user_key() more user-friendly (suggested by Daniel) - Fix validation of flags parameter in bpf_lookup_user_key() (reported by Daniel) - Rename bpf_verify_pkcs7_signature() keyring-related parameters to user_keyring and system_keyring to make their purpose more clear - Accept keyring-related parameters of bpf_verify_pkcs7_signature() as alternatives (suggested by KP) - Replace unsigned long type with u64 in helper declaration (suggested by Daniel) - Extend the bpf_verify_pkcs7_signature() test by calling the helper without data, by ensuring that the helper enforces the keyring-related parameters as alternatives, by ensuring that the helper rejects inaccessible and expired keyrings, and by checking all system keyrings - Move bpf_lookup_user_key() and bpf_key_put() usage tests to ref_tracking.c (suggested by John) - Call bpf_lookup_user_key() and bpf_key_put() only in sleepable programs v5: - Move KEY_LOOKUP_ to include/linux/key.h for validation of bpf_verify_pkcs7_signature() parameter - Remove bpf_lookup_user_key() and bpf_key_put() helpers, and the corresponding tests - Replace struct key parameter of bpf_verify_pkcs7_signature() with the keyring serial and lookup flags - Call lookup_user_key() and key_put() in bpf_verify_pkcs7_signature() code, to ensure that the retrieved key is used according to the permission requested at lookup time - Clarified keyring precedence in the description of bpf_verify_pkcs7_signature() (suggested by John) - Remove newline in the second argument of ASSERT_ - Fix helper prototype regular expression in bpf_doc.py v4: - Remove bpf_request_key_by_id(), don't return an invalid pointer that other helpers can use - Pass the keyring ID (without ULONG_MAX, suggested by Alexei) to bpf_verify_pkcs7_signature() - Introduce bpf_lookup_user_key() and bpf_key_put() helpers (suggested by Alexei) - Add lookup_key_norelease test, to ensure that the verifier blocks eBPF programs which don't decrement the key reference count - Parse raw PKCS#7 signature instead of module-style signature in the verify_pkcs7_signature test (suggested by Alexei) - Parse kernel module in user space and pass raw PKCS#7 signature to the eBPF program for signature verification v3: - Rename bpf_verify_signature() back to bpf_verify_pkcs7_signature() to avoid managing different parameters for each signature verification function in one helper (suggested by Daniel) - Use dynamic pointers and export bpf_dynptr_get_size() (suggested by Alexei) - Introduce bpf_request_key_by_id() to give more flexibility to the caller of bpf_verify_pkcs7_signature() to retrieve the appropriate keyring (suggested by Alexei) - Fix test by reordering the gcc command line, always compile sign-file - Improve helper support check mechanism in the test v2: - Rename bpf_verify_pkcs7_signature() to a more generic bpf_verify_signature() and pass the signature type (suggested by KP) - Move the helper and prototype declaration under #ifdef so that user space can probe for support for the helper (suggested by Daniel) - Describe better the keyring types (suggested by Daniel) - Include linux/bpf.h instead of vmlinux.h to avoid implicit or redeclaration - Make the test selfcontained (suggested by Alexei) v1: - Don't define new map flag but introduce simple wrapper of verify_pkcs7_signature() (suggested by Alexei and KP) Roberto Sassu (7): bpf: Export bpf_dynptr_get_size() KEYS: Move KEY_LOOKUP_ to include/linux/key.h bpf: Add bpf_lookup_user_key() and bpf_key_put() helpers bpf: Add bpf_verify_pkcs7_signature() helper selftests: Add verifier tests for bpf_lookup_user_key() and bpf_key_put() selftests/bpf: Add additional test for bpf_lookup_user_key() selftests/bpf: Add test for bpf_verify_pkcs7_signature() helper include/linux/bpf.h | 1 + include/linux/key.h | 3 + include/uapi/linux/bpf.h | 47 ++ kernel/bpf/bpf_lsm.c | 116 +++++ kernel/bpf/helpers.c | 2 +- kernel/bpf/verifier.c | 6 +- scripts/bpf_doc.py | 2 + security/keys/internal.h | 2 - tools/include/uapi/linux/bpf.h | 47 ++ tools/testing/selftests/bpf/Makefile | 14 +- tools/testing/selftests/bpf/config | 2 + .../bpf/prog_tests/lookup_user_key.c | 94 ++++ .../bpf/prog_tests/verify_pkcs7_sig.c | 410 ++++++++++++++++++ .../bpf/progs/test_lookup_user_key.c | 35 ++ .../bpf/progs/test_verify_pkcs7_sig.c | 90 ++++ tools/testing/selftests/bpf/test_verifier.c | 3 +- .../selftests/bpf/verifier/ref_tracking.c | 66 +++ .../testing/selftests/bpf/verify_sig_setup.sh | 104 +++++ 18 files changed, 1035 insertions(+), 9 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/lookup_user_key.c create mode 100644 tools/testing/selftests/bpf/prog_tests/verify_pkcs7_sig.c create mode 100644 tools/testing/selftests/bpf/progs/test_lookup_user_key.c create mode 100644 tools/testing/selftests/bpf/progs/test_verify_pkcs7_sig.c create mode 100755 tools/testing/selftests/bpf/verify_sig_setup.sh -- 2.25.1

2 years, 12 months

2
8
0 0

[PATCH v2] kunit: executor: Fix a memory leak on failure in kunit_filter_tests

by David Gow

It's possible that memory allocation for 'filtered' will fail, but for the copy of the suite to succeed. In this case, the copy could be leaked. Properly free 'copy' in the error case for the allocation of 'filtered' failing. Note that there may also have been a similar issue in kunit_filter_subsuites, before it was removed in "kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites". This was reported by clang-analyzer via the kernel test robot, here: https://lore.kernel.org/all/c8073b8e-7b9e-0830-4177-87c12f16349c@intel.com/ And by smatch via Dan Carpenter and the kernel test robot: https://lore.kernel.org/all/202207101328.ASjx88yj-lkp@intel.com/ Fixes: a02353f49162 ("kunit: bail out of test filtering logic quicker if OOM") Reported-by: kernel test robot <yujie.liu(a)intel.com> Reported-by: kernel test robot <lkp(a)intel.com> Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Reviewed-by: Daniel Latypov <dlatypov(a)google.com> Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> Signed-off-by: David Gow <davidgow(a)google.com> --- Thanks everyone! No actual code changes in v2, just fixes to the description. Changes since v1: https://lore.kernel.org/all/20220712095627.1770312-1-davidgow@google.com/ - Fix a mistake in the commit description where we noted the allocation for 'copy' could fail, instead of 'filtered'. (Thanks Yujie!) - Noted in the description that smatch also found this (Thanks Dan!) - Added the extra Reported-by and Reviewed-by tags. --- lib/kunit/executor.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c index 6c489d6c5e5d..5e223327196a 100644 --- a/lib/kunit/executor.c +++ b/lib/kunit/executor.c @@ -74,8 +74,10 @@ kunit_filter_tests(const struct kunit_suite *const suite, const char *test_glob) return ERR_PTR(-ENOMEM); filtered = kcalloc(n + 1, sizeof(*filtered), GFP_KERNEL); - if (!filtered) + if (!filtered) { + kfree(copy); return ERR_PTR(-ENOMEM); + } n = 0; kunit_suite_for_each_test_case(suite, test_case) { -- 2.37.0.144.g8ac04bfd2-goog

2 years, 12 months

1
0
0 0

[PATCH] kunit: executor: Fix a memory leak on failure in kunit_filter_tests

by David Gow

It's possible that memory allocation for the copy will fail, but for the copy of the suite to succeed. In this case, the copy could be leaked. Properly free 'copy' in the error case for the allocation of 'filtered' failing. Note that there may also have been a similar issue in kunit_filter_subsuites, before it was removed in "kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites". This was reported by clang-analyzer via the kernel test robot, here: https://lore.kernel.org/all/c8073b8e-7b9e-0830-4177-87c12f16349c@intel.com/ Fixes: a02353f49162 ("kunit: bail out of test filtering logic quicker if OOM") Reported-by: kernel test robot <yujie.liu(a)intel.com> Signed-off-by: David Gow <davidgow(a)google.com> --- lib/kunit/executor.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c index 6c489d6c5e5d..5e223327196a 100644 --- a/lib/kunit/executor.c +++ b/lib/kunit/executor.c @@ -74,8 +74,10 @@ kunit_filter_tests(const struct kunit_suite *const suite, const char *test_glob) return ERR_PTR(-ENOMEM); filtered = kcalloc(n + 1, sizeof(*filtered), GFP_KERNEL); - if (!filtered) + if (!filtered) { + kfree(copy); return ERR_PTR(-ENOMEM); + } n = 0; kunit_suite_for_each_test_case(suite, test_case) { -- 2.37.0.144.g8ac04bfd2-goog

2 years, 12 months

4
3
0 0

kselftest/next build: 5 builds: 0 failed, 5 passed (v5.19-rc4-13-g67bd292cd281)

by kernelci.org bot

kselftest/next build: 5 builds: 0 failed, 5 passed (v5.19-rc4-13-g67bd292cd281) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v5.19-rc4-13-g67bd2… Tree: kselftest Branch: next Git Describe: v5.19-rc4-13-g67bd292cd281 Git Commit: 67bd292cd281be2216cd269c161be31cd3ccf196 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 2 unique architectures ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

3 years

1
0
0 0

[PATCH net] selftest: net: add tun to .gitignore

by Jakub Kicinski

Add missing .gitignore entry. Fixes: 839b92fede7b ("selftest: tun: add test for NAPI dismantle") Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- tools/testing/selftests/net/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index a29f79618934..ffc35a22e914 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -36,4 +36,5 @@ test_unix_oob gro ioam6_parser toeplitz +tun cmsg_sender -- 2.36.1

3 years

2
1
0 0

[PATCH] selftests/ftrace: func_event_triggers: fix typo in user message

by Randy Dunlap

Correct typo of "it's" to "it". Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Shuah Khan <shuah(a)kernel.org> Cc: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- linux-next-20211224.orig/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc +++ linux-next-20211224/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc @@ -85,7 +85,7 @@ run_enable_disable() { echo $check_disable > $EVENT_ENABLE done sleep $SLEEP_TIME - echo " make sure it's still works" + echo " make sure it still works" test_event_enabled $check_enable_star reset_ftrace_filter

3 years

2
2
0 0

[PATCH v6 1/4] panic: Taint kernel if tests are run

by David Gow

Most in-kernel tests (such as KUnit tests) are not supposed to run on production systems: they may do deliberately illegal things to trigger errors, and have security implications (for example, KUnit assertions will often deliberately leak kernel addresses). Add a new taint type, TAINT_TEST to signal that a test has been run. This will be printed as 'N' (originally for kuNit, as every other sensible letter was taken.) This should discourage people from running these tests on production systems, and to make it easier to tell if tests have been run accidentally (by loading the wrong configuration, etc.) Acked-by: Luis Chamberlain <mcgrof(a)kernel.org> Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> Signed-off-by: David Gow <davidgow(a)google.com> --- This is v6 of the "make tests taint the kernel" patchset. The only changes since v5 (which is the version in linux-next at time of writing) are some rather critical fixes to patch 2/4, where the cruicial check was inverted. (Oops!) The 'N' character for the taint is even less useful now that it's no longer short for kuNit, but all the letters in TEST are taken. :-( No changes since v5: https://lore.kernel.org/linux-kselftest/20220702040959.3232874-1-davidgow@g… No changes since v4: https://lore.kernel.org/linux-kselftest/20220701084744.3002019-1-davidgow@g… Changes since v3: https://lore.kernel.org/lkml/20220513083212.3537869-1-davidgow@google.com/ - Remove the mention of KUnit from the documentation. - Add Luis and Brendan's Acked/Reviewed-by tags. Changes since v2: https://lore.kernel.org/linux-kselftest/20220430030019.803481-1-davidgow@go… - Rename TAINT_KUNIT -> TAINT_TEST. - Split into separate patches for adding the taint, and triggering it. - Taint on a kselftest_module being loaded (patch 3/3) Changes since v1: https://lore.kernel.org/linux-kselftest/20220429043913.626647-1-davidgow@go… - Make the taint per-module, to handle the case when tests are in (longer lasting) modules. (Thanks Greg KH). Note that this still has checkpatch.pl warnings around bracket placement, which are intentional as part of matching the surrounding code. --- Documentation/admin-guide/tainted-kernels.rst | 1 + include/linux/panic.h | 3 ++- kernel/panic.c | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/admin-guide/tainted-kernels.rst b/Documentation/admin-guide/tainted-kernels.rst index ceeed7b0798d..7d80e8c307d1 100644 --- a/Documentation/admin-guide/tainted-kernels.rst +++ b/Documentation/admin-guide/tainted-kernels.rst @@ -100,6 +100,7 @@ Bit Log Number Reason that got the kernel tainted 15 _/K 32768 kernel has been live patched 16 _/X 65536 auxiliary taint, defined for and used by distros 17 _/T 131072 kernel was built with the struct randomization plugin + 18 _/N 262144 an in-kernel test has been run === === ====== ======================================================== Note: The character ``_`` is representing a blank in this table to make reading diff --git a/include/linux/panic.h b/include/linux/panic.h index e71161da69c4..c7759b3f2045 100644 --- a/include/linux/panic.h +++ b/include/linux/panic.h @@ -68,7 +68,8 @@ static inline void set_arch_panic_timeout(int timeout, int arch_default_timeout) #define TAINT_LIVEPATCH 15 #define TAINT_AUX 16 #define TAINT_RANDSTRUCT 17 -#define TAINT_FLAGS_COUNT 18 +#define TAINT_TEST 18 +#define TAINT_FLAGS_COUNT 19 #define TAINT_FLAGS_MAX ((1UL << TAINT_FLAGS_COUNT) - 1) struct taint_flag { diff --git a/kernel/panic.c b/kernel/panic.c index a3c758dba15a..6b3369e21026 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -428,6 +428,7 @@ const struct taint_flag taint_flags[TAINT_FLAGS_COUNT] = { [ TAINT_LIVEPATCH ] = { 'K', ' ', true }, [ TAINT_AUX ] = { 'X', ' ', true }, [ TAINT_RANDSTRUCT ] = { 'T', ' ', true }, + [ TAINT_TEST ] = { 'N', ' ', true }, }; /** -- 2.37.0.rc0.161.g10f37bed90-goog

3 years

3
9
0 0

Re: [PATCH] selftests/proc: Fix proc-pid-vm for vsyscall=xonly.

by Dylan Hatch

Accidentally hit direct reply, adding Shuah Khan <shuah(a)kernel.org>, linux-kernel(a)vger.kernel.org, linux-fsdevel(a)vger.kernel.org, linux-kselftest(a)vger.kernel.org, Shuah Khan <skhan(a)linuxfoundation.org> On Mon, Jul 11, 2022 at 4:04 PM Dylan Hatch <dylanbhatch(a)google.com> wrote: > > On Wed, Jun 22, 2022 at 10:15 AM Shuah Khan <skhan(a)linuxfoundation.org> wrote: > > > > On 6/21/22 6:18 PM, Dylan Hatch wrote: > > > On Fri, Jun 17, 2022 at 3:27 PM Shuah Khan <skhan(a)linuxfoundation.org> wrote: > > >> > > >> On 6/17/22 4:05 PM, Dylan Hatch wrote: > > >>> On Fri, Jun 17, 2022 at 12:38 PM Shuah Khan <skhan(a)linuxfoundation.org> wrote: > > >>>> > > >>>> On 6/17/22 12:45 PM, Dylan Hatch wrote: > > >>>>> On Thu, Jun 16, 2022 at 4:01 PM Shuah Khan <skhan(a)linuxfoundation.org> wrote: > > >>>>>> > > >>> > > >>>> > > >>>> It depends on the goal of the test. Is the test looking to see if the > > >>>> probe fails with insufficient permissions, then you are changing the > > >>>> test to not check for that condition. > > >>> > > >>> The goal of the test is to validate the output of /proc/$PID/maps, and > > >>> the memory probe is only needed as setup to determine what the > > >>> expected output should be. This used to be sufficient, but now it can > > >>> no longer fully disambiguate it with the introduction of > > >>> vsyscall=xonly. The solution proposed here is to disambiguate it by > > >>> also checking the length read from /proc/$PID/maps. > > >>> > > >>>> > > >> > > >> Makes sense. However the question is does this test need to be enhanced > > >> with the addition of vsyscall=xonly? > > >> > > >>>> I would say in this case, the right approach would be to leave the test > > >>>> as is and report expected fail and add other cases. > > >>>> > > >>>> The goal being adding more coverage and not necessarily opt for a simple > > >>>> solution. > > >>> > > >>> What does it mean to report a test as expected fail? Is this a > > >>> mechanism unique to kselftest? I agree adding another test case would > > >>> work, but I'm unsure how to do it within the framework of kselftest. > > >>> Ideally, there would be separate test cases for vsyscall=none, > > >>> vsyscall=emulate, and vsyscall=xonly, but these options can be toggled > > >>> both in the kernel config and on the kernel command line, meaning (to > > >>> the best of my knowledge) these test cases would have to be built > > >>> conditionally against the conflig options and also parse the command > > >>> line for the 'vsyscall' option. > > >>> > > >> > > >> Expected fail isn't unique kselftest. It is a testing criteria where > > >> a test is expected to fail. For example if a file can only be opened > > >> with privileged user a test that runs and looks for failure is an > > >> expected to fail case - we are looking for a failure. > > >> > > >> A complete battery of tests for vsyscall=none, vsyscall=emulate, > > >> vsyscall=xonly would test for conditions that are expected to pass > > >> and fail based on the config. > > >> > > >> tools/testing/selftests/proc/config doesn't have any config options > > >> that are relevant to VSYSCALL > > >> > > >> Can you please send me the how you are running the test and what the > > >> failure output looks like? > > > > > > I'm building a kernel with the following relevant configurations: > > > > > > $ cat .config | grep VSYSCALL > > > CONFIG_GENERIC_TIME_VSYSCALL=y > > > CONFIG_X86_VSYSCALL_EMULATION=y > > > CONFIG_LEGACY_VSYSCALL_XONLY=y > > > # CONFIG_LEGACY_VSYSCALL_NONE is not set > > > > > > Running the test without this change both in virtme and on real > > > hardware gives the following error: > > > > > > # ./tools/testing/selftests/proc/proc-pid-vm > > > proc-pid-vm: proc-pid-vm.c:328: int main(void): Assertion `rv == len' failed. > > > Aborted > > > > > > This is because when CONFIG_LEGACY_VSYSCALL_XONLY=y a probe of the > > > vsyscall page results in a segfault. This test was originally written > > > before this option existed so it incorrectly assumes the vsyscall page > > > isn't mapped at all, and the expected buffer length doesn't match the > > > result. > > > > > > An alternate method of fixing this test could involve setting the > > > expected result based on the config with #ifdef blocks, but I wasn't > > > sure if that could be done for kernel config options in kselftest > > > code. There's also the matter of checking the kernel command line for > > > a `vsyscall=` arg, is parsing /proc/cmdline the best way to do this? > > > > > > > We have a few tests do ifdef to be able to test the code as well as deal > > with config specific tests. Not an issue. > > > > Parsing /proc/cmdline line is flexible for sure, if you want to use that > > route. > > > > Thank you for finding the problem and identifying missing coverage. Look > > forward to any patches fixing the problem. > > > > thanks, > > -- Shuah > I've done some experimenting with ifdefs on config options, but it seems that these options do not propagate properly into the tests. Is there a specific method I should be using to propagate the config values, or would you be able to point me to an example where this is done properly? Thanks and sorry for the slow reply on this, Dylan

3 years

1
0
0 0

[PATCH v3] kunit: tool: Enable virtio/PCI by default on UML

by Daniel Latypov

From: David Gow <davidgow(a)google.com> There are several tests which depend on PCI, and hence need a bunch of extra options to run under UML. This makes it awkward to give configuration instructions (whether in documentation, or as part of a .kunitconfig file), as two separate, incompatible sets of config options are required for UML and "most other architectures". For non-UML architectures, it's possible to add default kconfig options via the qemu_config python files, but there's no equivalent for UML. Add a new tools/testing/kunit/configs/arch_uml.config file containing extra kconfig options to use on UML. Tested-by: José Expósito <jose.exposito89(a)gmail.com> Reviewed-by: Daniel Latypov <dlatypov(a)google.com> Signed-off-by: David Gow <davidgow(a)google.com> Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- NOTE: This depends on v4 of the repeatable --kunitconfig patch here: https://patchwork.kernel.org/project/linux-kselftest/patch/20220708013632.1… Please apply it first first. Changes since v2: (dlatypov(a)google.com) - Rebase on top of the -kselftest kunit branch + v4 of the --kunitconfig patch. It rebased cleanly, but it evidently would not apply cleanly due to all the conflicts v4 --kunitconfig had with --qemu_args Changes since v1: https://lore.kernel.org/linux-kselftest/20220624084400.1454579-1-davidgow@g… - (Hopefully) fix a pytype warning re: architecture being None in the tests. (Thanks, Daniel) - Rebase on top of the new combined v3 of the kconfig/kunitconfig patchset. - Add José's Tested-by and Daniel's Reviewed-by. Changes since RFC: https://lore.kernel.org/linux-kselftest/20220622035326.759935-1-davidgow@go… - Rebase on top of the previous kconfig patches. - Fix a missing make_arch_qemuconfig->make_arch_config rename (Thanks Brendan) - Fix the tests to use the base LinuxSourceTreeOperations class, which has no default kconfig options (and so won't conflict with those set in the tests). Only test_build_reconfig_existing_config actually failed, but I updated a few more in case the defaults changed. --- tools/testing/kunit/configs/arch_uml.config | 5 +++++ tools/testing/kunit/kunit_kernel.py | 14 ++++++++++---- tools/testing/kunit/kunit_tool_test.py | 12 ++++++++++++ 3 files changed, 27 insertions(+), 4 deletions(-) create mode 100644 tools/testing/kunit/configs/arch_uml.config diff --git a/tools/testing/kunit/configs/arch_uml.config b/tools/testing/kunit/configs/arch_uml.config new file mode 100644 index 000000000000..e824ce43b05a --- /dev/null +++ b/tools/testing/kunit/configs/arch_uml.config @@ -0,0 +1,5 @@ +# Config options which are added to UML builds by default + +# Enable virtio/pci, as a lot of tests require it. +CONFIG_VIRTIO_UML=y +CONFIG_UML_PCI_OVER_VIRTIO=y diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 56492090e28e..f5c26ea89714 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -26,6 +26,7 @@ KUNITCONFIG_PATH = '.kunitconfig' OLD_KUNITCONFIG_PATH = 'last_used_kunitconfig' DEFAULT_KUNITCONFIG_PATH = 'tools/testing/kunit/configs/default.config' BROKEN_ALLCONFIG_PATH = 'tools/testing/kunit/configs/broken_on_uml.config' +UML_KCONFIG_PATH = 'tools/testing/kunit/configs/arch_uml.config' OUTFILE_PATH = 'test.log' ABS_TOOL_PATH = os.path.abspath(os.path.dirname(__file__)) QEMU_CONFIGS_DIR = os.path.join(ABS_TOOL_PATH, 'qemu_configs') @@ -53,7 +54,7 @@ class LinuxSourceTreeOperations: except subprocess.CalledProcessError as e: raise ConfigError(e.output.decode()) - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: return base_kunitconfig def make_allyesconfig(self, build_dir: str, make_options) -> None: @@ -109,7 +110,7 @@ class LinuxSourceTreeOperationsQemu(LinuxSourceTreeOperations): self._kernel_command_line = qemu_arch_params.kernel_command_line + ' kunit_shutdown=reboot' self._extra_qemu_params = qemu_arch_params.extra_qemu_params - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: kconfig = kunit_config.parse_from_string(self._kconfig) kconfig.merge_in_entries(base_kunitconfig) return kconfig @@ -138,6 +139,11 @@ class LinuxSourceTreeOperationsUml(LinuxSourceTreeOperations): def __init__(self, cross_compile=None): super().__init__(linux_arch='um', cross_compile=cross_compile) + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + kconfig = kunit_config.parse_file(UML_KCONFIG_PATH) + kconfig.merge_in_entries(base_kunitconfig) + return kconfig + def make_allyesconfig(self, build_dir: str, make_options) -> None: stdout.print_with_timestamp( 'Enabling all CONFIGs for UML...') @@ -298,7 +304,7 @@ class LinuxSourceTree: if build_dir and not os.path.exists(build_dir): os.mkdir(build_dir) try: - self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_config(self._kconfig) self._kconfig.write_to_file(kconfig_path) self._ops.make_olddefconfig(build_dir, make_options) except ConfigError as e: @@ -329,7 +335,7 @@ class LinuxSourceTree: return self.build_config(build_dir, make_options) existing_kconfig = kunit_config.parse_file(kconfig_path) - self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_config(self._kconfig) if self._kconfig.is_subset_of(existing_kconfig) and not self._kunitconfig_changed(build_dir): return True diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index ad63d0d34f3f..446ac432d9a4 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -430,6 +430,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations('none', None) mock_build_config = mock.patch.object(tree, 'build_config').start() # Should generate the .config @@ -447,6 +451,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y\nCONFIG_KUNIT_TEST=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations('none', None) mock_build_config = mock.patch.object(tree, 'build_config').start() self.assertTrue(tree.build_reconfig(build_dir, make_options=[])) @@ -463,6 +471,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y\nCONFIG_KUNIT_TEST=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations('none', None) mock_build_config = mock.patch.object(tree, 'build_config').start() # ... so we should trigger a call to build_config() base-commit: cbb6bc7059151df198b45e883ed731d8f528b65b -- 2.37.0.rc0.161.g10f37bed90-goog

3 years

2
4
0 0

[PATCH 0/2] selftests: forwarding: Install two missing tests

by Martin Blumenstingl

For some distributions (e.g. OpenWrt) we don't want to rely on rsync to copy the tests to the target as some extra dependencies need to be installed. The Makefile in tools/testing/selftests/net/forwarding already installs most of the tests. This series adds the two missing tests to the list of installed tests. That way a downstream distribution can build a package using this Makefile (and add dependencies there as needed). Martin Blumenstingl (2): selftests: forwarding: Install local_termination.sh selftests: forwarding: Install no_forwarding.sh tools/testing/selftests/net/forwarding/Makefile | 2 ++ 1 file changed, 2 insertions(+) -- 2.37.0

3 years

3
7
0 0

[PATCH v3 0/5] Rework KUnit test execution in modules

by David Gow

This patch series makes two changes to how KUnit test suites are stored and executed: - The .kunit_test_suites section is now used for tests in modules (in lieu of a module_init funciton), as well as for built-in tests. The module loader will now trigger test execution. This frees up the module_init function for other uses. - Instead of storing an array of arrays of suites, have the kunit_test_suite() and kunit_test_suites() macros append to one global (or per-module) list of test suites. This removes a needless layer of indirection, and removes the need to NULL-terminate suite_sets. The upshot of this is that it should now be possible to use the kunit_test_suite() and kunit_test_suites() macros to register test suites even from within modules which otherwise had module_init functions. This was proving to be quite a common issue, resulting in several modules calling into KUnit's private suite execution functions to run their tests (often introducing incompatibilities with the KUnit tooling). This series also fixes the thunderbolt, nitro_enclaves, and sdhci-of-aspeed tests to use kunit_test_suite() now that it works. This is required, as otherwise the first two patches may break these tests entirely. Huge thanks to Jeremy Kerr, who designed and implemented the module loader changes, and to Daniel Latypov for pushing the simplification of the nested arrays in .kunit_test_suites. I've tested this series both with builtin tests on a number of architectures, and with modules on x86_64, and it seems good-to-go to me. More testing (particularly of modules) with more interesting setups never hurts, though! Cheers, -- David Changes since v2: https://lore.kernel.org/linux-kselftest/20220621085345.603820-1-davidgow@go… - Add various Reviewed-by and Acked-by tags. - Fix the Kconfig for thunderbolt to not allow USB4=y and KUNIT=m with tests enabled. - Clean up the sdhci-of-aspeed init a bit more (Thanks Daniel) Changes since v1: https://lore.kernel.org/linux-kselftest/20220618090310.1174932-1-davidgow@g… - Fix a compile issue when CONFIG_KUNIT=m (Thanks Christophe) - No longer NULL-terminate suite_sets. - Move the thunderbird Kconfig to the correct patch (Thanks Andra) - Add all the Tested-by and Acked-by tags. --- Daniel Latypov (1): Daniel Latypov (1): kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites David Gow (3): thunderbolt: test: Use kunit_test_suite() macro nitro_enclaves: test: Use kunit_test_suite() macro mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro Jeremy Kerr (1): kunit: unify module and builtin suite definitions drivers/mmc/host/Kconfig | 5 +- drivers/mmc/host/sdhci-of-aspeed-test.c | 8 +- drivers/mmc/host/sdhci-of-aspeed.c | 34 +---- drivers/thunderbolt/Kconfig | 6 +- drivers/thunderbolt/domain.c | 3 - drivers/thunderbolt/tb.h | 8 - drivers/thunderbolt/test.c | 12 +- drivers/virt/nitro_enclaves/Kconfig | 5 +- drivers/virt/nitro_enclaves/ne_misc_dev.c | 27 ---- .../virt/nitro_enclaves/ne_misc_dev_test.c | 5 +- include/kunit/test.h | 60 ++------ include/linux/module.h | 5 + kernel/module/main.c | 6 + lib/kunit/executor.c | 115 ++++---------- lib/kunit/executor_test.c | 144 +++++------------- lib/kunit/test.c | 54 ++++++- 16 files changed, 154 insertions(+), 343 deletions(-) -- 2.37.0.rc0.161.g10f37bed90-goog

3 years

3
12
0 0

<> Rank pharma or adult sites with blackhat SEO <>

by Julianne

Special Blackhat plans for special website needs https://blackhatseoservices.tk/ Unsubscribe: https://mgdots.co/unsubscribe/

3 years

1
0
0 0

kselftest/next kselftest-seccomp: 4 runs, 1 regressions (v5.19-rc4-9-gdbeb23272687)

by kernelci.org bot

kselftest/next kselftest-seccomp: 4 runs, 1 regressions (v5.19-rc4-9-gdbeb23272687) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | gcc-10 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v5.19-rc4-9-gdbe… Test: kselftest-seccomp Tree: kselftest Branch: next Describe: v5.19-rc4-9-gdbeb23272687 URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: dbeb232726871352fc3e688ff5b02897f8cb0dc7 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | gcc-10 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/62c8be7aee6aa7d244a39bcf Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-10 (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-9-gdbeb23272687/arm6… HTML log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-9-gdbeb23272687/arm6… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bullseye-kselftest/2022062… * kselftest-seccomp.login: https://kernelci.org/test/case/id/62c8be7aee6aa7d244a39bd0 failing since 10 days (last pass: v5.19-rc1, first fail: v5.19-rc4-4-g43fe0cc46b62)

3 years

1
0
0 0

kselftest/next build: 8 builds: 0 failed, 8 passed (v5.19-rc4-9-gdbeb23272687)

by kernelci.org bot

kselftest/next build: 8 builds: 0 failed, 8 passed (v5.19-rc4-9-gdbeb23272687) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v5.19-rc4-9-gdbeb23… Tree: kselftest Branch: next Git Describe: v5.19-rc4-9-gdbeb23272687 Git Commit: dbeb232726871352fc3e688ff5b02897f8cb0dc7 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

3 years

1
0
0 0

[PATCH bpf] selftests/bpf: Fix xdp_synproxy build failure if CONFIG_NF_CONNTRACK=m/n

by Maxim Mikityanskiy

When CONFIG_NF_CONNTRACK=m, struct bpf_ct_opts and enum member BPF_F_CURRENT_NETNS are not exposed. This commit allows building the xdp_synproxy selftest in such cases. Note that nf_conntrack must be loaded before running the test if it's compiled as a module. This commit also allows this selftest to be successfully compiled when CONFIG_NF_CONNTRACK is disabled. One unused local variable of type struct bpf_ct_opts is also removed. Reported-by: Yauheni Kaliuta <ykaliuta(a)redhat.com> Signed-off-by: Maxim Mikityanskiy <maximmi(a)nvidia.com> Fixes: fb5cd0ce70d4 ("selftests/bpf: Add selftests for raw syncookie helpers") --- .../selftests/bpf/progs/xdp_synproxy_kern.c | 24 +++++++++++++------ 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c b/tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c index 9fd62e94b5e6..736686e903f6 100644 --- a/tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c +++ b/tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c @@ -77,16 +77,30 @@ struct { __uint(max_entries, MAX_ALLOWED_PORTS); } allowed_ports SEC(".maps"); +/* Some symbols defined in net/netfilter/nf_conntrack_bpf.c are unavailable in + * vmlinux.h if CONFIG_NF_CONNTRACK=m, so they are redefined locally. + */ + +struct bpf_ct_opts___local { + s32 netns_id; + s32 error; + u8 l4proto; + u8 dir; + u8 reserved[2]; +} __attribute__((preserve_access_index)); + +#define BPF_F_CURRENT_NETNS (-1) + extern struct nf_conn *bpf_xdp_ct_lookup(struct xdp_md *xdp_ctx, struct bpf_sock_tuple *bpf_tuple, __u32 len_tuple, - struct bpf_ct_opts *opts, + struct bpf_ct_opts___local *opts, __u32 len_opts) __ksym; extern struct nf_conn *bpf_skb_ct_lookup(struct __sk_buff *skb_ctx, struct bpf_sock_tuple *bpf_tuple, u32 len_tuple, - struct bpf_ct_opts *opts, + struct bpf_ct_opts___local *opts, u32 len_opts) __ksym; extern void bpf_ct_release(struct nf_conn *ct) __ksym; @@ -393,7 +407,7 @@ static __always_inline int tcp_dissect(void *data, void *data_end, static __always_inline int tcp_lookup(void *ctx, struct header_pointers *hdr, bool xdp) { - struct bpf_ct_opts ct_lookup_opts = { + struct bpf_ct_opts___local ct_lookup_opts = { .netns_id = BPF_F_CURRENT_NETNS, .l4proto = IPPROTO_TCP, }; @@ -714,10 +728,6 @@ static __always_inline int syncookie_handle_ack(struct header_pointers *hdr) static __always_inline int syncookie_part1(void *ctx, void *data, void *data_end, struct header_pointers *hdr, bool xdp) { - struct bpf_ct_opts ct_lookup_opts = { - .netns_id = BPF_F_CURRENT_NETNS, - .l4proto = IPPROTO_TCP, - }; int ret; ret = tcp_dissect(data, data_end, hdr); -- 2.30.2

3 years

4
3
0 0

[PATCH net-next 0/5] tls: rx: nopad and backlog flushing

by Jakub Kicinski

This small series contains the two changes I've been working towards in the previous ~50 patches a couple of months ago. The first major change is the optional "nopad" optimization. Currently TLS 1.3 Rx performs quite poorly because it does not support the "zero-copy" or rather direct decrypt to a user space buffer. Because of TLS 1.3 record padding we don't know if a record contains data or a control message until we decrypt it. Most records will contain data, tho, so the optimization is to try the decryption hoping its data and retry if it wasn't. The performance gain from doing that is significant (~40%) but if I'm completely honest the major reason is that we call skb_cow_data() on the non-"zc" path. The next series will remove the CoW, dropping the gain to only ~10%. The second change is to flush the backlog every 128kB. Jakub Kicinski (5): tls: rx: don't include tail size in data_len tls: rx: support optimistic decrypt to user buffer with TLS 1.3 tls: rx: add sockopt for enabling optimistic decrypt with TLS 1.3 selftests: tls: add selftest variant for pad tls: rx: periodically flush socket backlog Documentation/networking/tls.rst | 18 +++++++ include/linux/sockptr.h | 8 +++ include/net/tls.h | 3 ++ include/uapi/linux/snmp.h | 1 + include/uapi/linux/tls.h | 2 + net/core/sock.c | 1 + net/tls/tls_main.c | 75 +++++++++++++++++++++++++++ net/tls/tls_proc.c | 1 + net/tls/tls_sw.c | 84 ++++++++++++++++++++++++------- tools/testing/selftests/net/tls.c | 15 ++++++ 10 files changed, 191 insertions(+), 17 deletions(-) -- 2.36.1

3 years

3
8
0 0

[PATCH 00/12] Fix several documentation build warnings with Sphinx 2.4.4

by Mauro Carvalho Chehab

This series is against next-20220701. It fixes several warnings that are currently produced while building html docs. Each patch in this series is independent from the others, as each one touches a different file. Mauro Carvalho Chehab (12): docs: ext4: blockmap.rst: fix a broken table docs: tegra194-hte.rst: don't include gpiolib.c twice docs: device-mapper: add a blank line at writecache.rst docs: PCI: pci-vntb-function.rst: Properly include ascii artwork docs: PCI: pci-vntb-howto.rst: fix a title markup docs: virt: kvm: fix a title markup at api.rst docs: ABI: sysfs-bus-nvdimm kunit: test.h: fix a kernel-doc markup net: mac80211: fix a kernel-doc markup docs: alsa: alsa-driver-api.rst: remove a kernel-doc file docs: arm: index.rst: add google/chromebook-boot-flow docs: leds: index.rst: add leds-qcom-lpg to it Documentation/ABI/testing/sysfs-bus-nvdimm | 2 ++ Documentation/PCI/endpoint/pci-vntb-function.rst | 2 +- Documentation/PCI/endpoint/pci-vntb-howto.rst | 2 +- Documentation/admin-guide/device-mapper/writecache.rst | 1 + Documentation/arm/index.rst | 2 ++ Documentation/driver-api/hte/tegra194-hte.rst | 3 +-- Documentation/filesystems/ext4/blockmap.rst | 2 +- Documentation/leds/index.rst | 1 + Documentation/sound/kernel-api/alsa-driver-api.rst | 1 - Documentation/virt/kvm/api.rst | 6 +++--- include/kunit/test.h | 2 +- include/net/mac80211.h | 2 +- 12 files changed, 15 insertions(+), 11 deletions(-) -- 2.36.1

3 years

4
4
0 0

[PATCH v13 0/4] trace: Introduce objtrace trigger to trace the kernel object

by Jeff Xie

Introduce a method based on function tracer to trace any object and get the value of the object dynamically. the object can be obtained from the dynamic event (kprobe_event/uprobe_event) or the static event(tracepoint). Usage: When using the kprobe event, only need to set the objtrace(a new trigger), we can get the value of the object. The object is from the setting of the kprobe event. For example: For the function bio_add_page(): int bio_add_page(struct bio *bio, struct page *page, unsigned int len, unsigned int offset) Firstly, we can set the base of the object, thus the first string "arg1" stands for the value of the first parameter of this function bio_add_gage(), # echo 'p bio_add_page arg1=$arg1' > ./kprobe_events Secondly, we can get the value dynamically based on above object. find the offset of the bi_size in struct bio: $ gdb vmlinux (gdb) p &(((struct bio *)0)->bi_iter.bi_size) $1 = (unsigned int *) 0x28 # echo 'objtrace:add:arg1,0x28:u32:1 if comm == "cat"' > ./events/kprobes/ \ p_bio_add_page_0/trigger # cd /sys/kernel/debug/tracing/ # echo 'p bio_add_page arg1=$arg1' > ./kprobe_events # echo 'objtrace:add:arg1,0x28:u32:1 if comm == "cat"' > ./events/kprobes/p_bio_add_page_0/trigger # du -sh /test.txt 12.0K /test.txt # cat /test.txt > /dev/null # cat ./trace # tracer: nop # # entries-in-buffer/entries-written: 128/128 #P:4 # # _-----=> irqs-off/BH-disabled # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / _-=> migrate-disable # |||| / delay # TASK-PID CPU# ||||| TIMESTAMP FUNCTION # | | | ||||| | | cat-117 [002] ...1. 1.602243: __bio_try_merge_page <-bio_add_page object:0xffff88811bee4000 value:0x0 cat-117 [002] ...1. 1.602244: __bio_add_page <-bio_add_page object:0xffff88811bee4000 value:0x0 cat-117 [002] ...2. 1.602244: bio_add_page <-ext4_mpage_readpages object:0xffff88811bee4000 value:0x1000 cat-117 [002] ...1. 1.602245: __bio_try_merge_page <-bio_add_page object:0xffff88811bee4000 value:0x1000 cat-117 [002] ...1. 1.602245: __bio_add_page <-bio_add_page object:0xffff88811bee4000 value:0x1000 cat-117 [002] ...2. 1.602245: bio_add_page <-ext4_mpage_readpages object:0xffff88811bee4000 value:0x2000 cat-117 [002] ...1. 1.602245: __bio_try_merge_page <-bio_add_page object:0xffff88811bee4000 value:0x2000 cat-117 [002] ...1. 1.602245: __bio_add_page <-bio_add_page object:0xffff88811bee4000 value:0x2000 cat-117 [002] ...1. 1.602245: submit_bio <-ext4_mpage_readpages object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602245: submit_bio_noacct <-ext4_mpage_readpages object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: __submit_bio <-submit_bio_noacct object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: submit_bio_checks <-__submit_bio object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: __cond_resched <-submit_bio_checks object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: should_fail_bio <-submit_bio_checks object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: blk_mq_submit_bio <-submit_bio_noacct object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: blk_attempt_plug_merge <-blk_mq_submit_bio object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: blk_mq_sched_bio_merge <-blk_mq_submit_bio object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602247: __rcu_read_lock <-blk_mq_submit_bio object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602247: __rcu_read_unlock <-blk_mq_submit_bio object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602247: __blk_mq_alloc_requests <-blk_mq_submit_bio object:0xffff88811bee4000 value:0x3000 <idle>-0 [002] d..3. 1.602298: bio_endio <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602298: mpage_end_io <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602298: __read_end_io <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602300: bio_put <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602300: bio_free <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602300: mempool_free <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602300: mempool_free_slab <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602300: kmem_cache_free <-blk_update_request object:0xffff88811bee4000 value:0x0 ... Almost all changelogs were suggested by Masami(mhiramat(a)kernel.org) and steve(rostedt(a)goodmis.org), thank you all so much. v13: - remove the 's' type, since the objtrace event doesn't show the value with sign - change the [3/4] tag with 'selftests/ftrace' instead of 'trace/objtrace' - add 'Documentation:' tag for [4/4] v12: - use the %zu to print the sizeof Reported-by: kernel test robot <lkp(a)intel.com> Suggested-by: Nathan Chancellor <nathan(a)kernel.org> v11: - remove useless atomic counting methods for num_traced_obj - make array objtrace_fetch_types null terminated - add raw_spin_lock_init for obj_data_lock v10: - support ftrace instances - use trace_buffer_lock_reserve instead of trace_event_buffer_lock_reserve - a lot of cleanup work has been done mainly for event_object_trigger_parse v9: - fix objtrace trigger output was incomplete - fix the objtrace trigger was removed when using the existed parameter on event. - add testcase for the second fix above. v8: - revert to use per-cpu recursion for the function trace_object_events_call - recover the filter when getting the value of the object - simplify the implementation for the function get_object_value - fix the build error v7: - use fixed-size array for object pool instead of list structure - use ftrace_test_recursion_trylock for function trace hook function - fix trace_object_ref reference count in the init_trace_object - invoke exit_trace_object no matter whether data->ops->free is null in the unregister_object_trigger - release private_data of event_trigger_data in the trace_object_trigger_free - remove [RFC] tag v6: - change the objtrace trigger syntax. - add patchset description - add <tracefs>/README v5: - add testcasts - add check the field->size - add lockless to search object - describe the object trace more clearly in Kconfig v4: - please ignore the v4 which is the same as v3 v3: - change the objfilter to objtrace - add a command to the objfilter syntax - change to get the value of the object - use trace_find_event_field to find the field instead of using argN - get data from @rec in the event trigger callback funciton v2: - adding a "objfilter" trigger to update object Jeff Xie (4): trace: Add trace any kernel object trace/objtrace: Get the value of the object selftests/ftrace: Add testcases for objtrace Documentation: trace/objtrace: Add documentation for objtrace Documentation/trace/events.rst | 83 +++ include/linux/trace_events.h | 1 + kernel/trace/Kconfig | 10 + kernel/trace/Makefile | 1 + kernel/trace/trace.c | 11 + kernel/trace/trace.h | 21 + kernel/trace/trace_entries.h | 18 + kernel/trace/trace_events_trigger.c | 5 +- kernel/trace/trace_object.c | 611 ++++++++++++++++++ kernel/trace/trace_output.c | 40 ++ .../ftrace/test.d/trigger/trigger-objtrace.tc | 41 ++ 11 files changed, 840 insertions(+), 2 deletions(-) create mode 100644 kernel/trace/trace_object.c create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc base-commit: 408d26e261b089596c0837e71d2fb4a80ea04ef3 -- 2.25.1

3 years

4
11
0 0

[PATCH v4 0/9] drm: selftest: Convert to KUnit

by Maíra Canal

Hi everyone, Here is the v4 of the conversion of selftests to KUnit. Since the v3, there have been minor fixes, asked by Javier. Basically, fixes on the SoB chain and addition of Copywrites. Thanks for your attention and any feedback is welcomed! Best Regards, - Maíra Canal v1 -> v2: https://lore.kernel.org/dri-devel/20220615135824.15522-1-maira.canal@usp.br… - The suites not longer end in _tests (David Gow). - Remove the TODO entry involving the conversion of selftests to KUnit (Javier Martinez Canillas). - Change the filenames to match the documentation: use *_test.c (Javier Martinez Canillas). - Add MODULE_LICENSE to all tests (kernel test robot). - Make use of a generic symbol to group all tests - DRM_KUNIT_TEST (Javier Martinez Canillas). - Add .kunitconfig on the first patch (it was on the second patch of the series). - Straightforward conversion of the drm_cmdline_parser tests without functional changes (Shuah Khan) - Add David's Tested-by tags. v2 -> v3: https://lore.kernel.org/dri-devel/20220621200926.257002-1-maira.canal@usp.b… - Rebase it on top of the drm-misc-next with drm_format_helper KUnit tests. - Change KUNIT_EXPECT_FALSE to KUNIT_EXPECT_EQ on drm_format_test (Daniel Latypov). - Add Daniel's Acked-by tag. v3 -> v4: https://lore.kernel.org/dri-devel/9185aadb-e459-00fe-70be-3675f6f3ef4c@redh… - Add blank line after #include <kunit/test.h> (Javier Martinez Canillas). - Make the order of the tags chronological (Javier Martinez Canillas). - Add Copywrite to the tests (Javier Martinez Canillas). - Add Javier Martinez Canillas's Reviewed-by tag. Arthur Grillo (1): drm: selftest: convert drm_mm selftest to KUnit Maíra Canal (8): drm: selftest: convert drm_damage_helper selftest to KUnit drm: selftest: convert drm_cmdline_parser selftest to KUnit drm: selftest: convert drm_rect selftest to KUnit drm: selftest: convert drm_format selftest to KUnit drm: selftest: convert drm_plane_helper selftest to KUnit drm: selftest: convert drm_dp_mst_helper selftest to KUnit drm: selftest: convert drm_framebuffer selftest to KUnit drm: selftest: convert drm_buddy selftest to KUnit Documentation/gpu/todo.rst | 11 - drivers/gpu/drm/Kconfig | 20 +- drivers/gpu/drm/Makefile | 1 - drivers/gpu/drm/selftests/Makefile | 8 - .../gpu/drm/selftests/drm_buddy_selftests.h | 15 - .../gpu/drm/selftests/drm_cmdline_selftests.h | 68 - drivers/gpu/drm/selftests/drm_mm_selftests.h | 28 - .../gpu/drm/selftests/drm_modeset_selftests.h | 40 - drivers/gpu/drm/selftests/drm_selftest.c | 109 -- drivers/gpu/drm/selftests/drm_selftest.h | 41 - drivers/gpu/drm/selftests/test-drm_buddy.c | 994 -------------- .../drm/selftests/test-drm_cmdline_parser.c | 1141 ----------------- .../drm/selftests/test-drm_damage_helper.c | 668 ---------- drivers/gpu/drm/selftests/test-drm_format.c | 280 ---- .../drm/selftests/test-drm_modeset_common.c | 32 - .../drm/selftests/test-drm_modeset_common.h | 52 - drivers/gpu/drm/tests/Makefile | 4 +- drivers/gpu/drm/tests/drm_buddy_test.c | 750 +++++++++++ .../gpu/drm/tests/drm_cmdline_parser_test.c | 1080 ++++++++++++++++ .../gpu/drm/tests/drm_damage_helper_test.c | 637 +++++++++ .../drm_dp_mst_helper_test.c} | 87 +- drivers/gpu/drm/tests/drm_format_test.c | 287 +++++ .../drm_framebuffer_test.c} | 26 +- .../test-drm_mm.c => tests/drm_mm_test.c} | 1136 +++++++--------- .../drm_plane_helper_test.c} | 104 +- .../test-drm_rect.c => tests/drm_rect_test.c} | 125 +- 26 files changed, 3406 insertions(+), 4338 deletions(-) delete mode 100644 drivers/gpu/drm/selftests/Makefile delete mode 100644 drivers/gpu/drm/selftests/drm_buddy_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_cmdline_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_mm_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_modeset_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.c delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.h delete mode 100644 drivers/gpu/drm/selftests/test-drm_buddy.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_cmdline_parser.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_damage_helper.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_format.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.h create mode 100644 drivers/gpu/drm/tests/drm_buddy_test.c create mode 100644 drivers/gpu/drm/tests/drm_cmdline_parser_test.c create mode 100644 drivers/gpu/drm/tests/drm_damage_helper_test.c rename drivers/gpu/drm/{selftests/test-drm_dp_mst_helper.c => tests/drm_dp_mst_helper_test.c} (72%) create mode 100644 drivers/gpu/drm/tests/drm_format_test.c rename drivers/gpu/drm/{selftests/test-drm_framebuffer.c => tests/drm_framebuffer_test.c} (96%) rename drivers/gpu/drm/{selftests/test-drm_mm.c => tests/drm_mm_test.c} (58%) rename drivers/gpu/drm/{selftests/test-drm_plane_helper.c => tests/drm_plane_helper_test.c} (62%) rename drivers/gpu/drm/{selftests/test-drm_rect.c => tests/drm_rect_test.c} (53%) -- 2.36.1

3 years

3
12
0 0

[PATCH v6 0/5] bpf: Add bpf_verify_pkcs7_signature() helper

by Roberto Sassu

One of the desirable features in security is the ability to restrict import of data to a given system based on data authenticity. If data import can be restricted, it would be possible to enforce a system-wide policy based on the signing keys the system owner trusts. This feature is widely used in the kernel. For example, if the restriction is enabled, kernel modules can be plugged in only if they are signed with a key whose public part is in the primary or secondary keyring. For eBPF, it can be useful as well. For example, it might be useful to authenticate data an eBPF program makes security decisions on. After a discussion in the eBPF mailing list, it was decided that the stated goal should be accomplished by introducing a new helper: bpf_verify_pkcs7_signature(), dedicated to verify PKCS#7 signatures. More helpers will be introduced later, as necessary. The job of bpf_verify_pkcs7_signature() is to retrieve the trusted keyring from function parameters, and to perform signature verification by calling verify_pkcs7_signature(). Data and signature can be provided to the new helper with two dynamic pointers, to reduce the number of parameters. The keyring can be provided by its serial, or by its special ID defined in verification.h, if the serial is zero (not a valid value). bpf_verify_pkcs7_signature() also accepts key lookup-specific flags, passed to lookup_user_key() when the helper searches the keyring by its serial. While passing the keyring serial to bpf_verify_pkcs7_signature() provides great flexibility, it seems suboptimal in terms of security guarantees, as even if the eBPF program is assumed to be trusted, that serial might come from untrusted user space not choosing one that the system administrator approves to enforce a mandatory policy. The same goal could be instead more easily achieved by setting a hardcoded keyring ID in the signed eBPF program, to be passed to bpf_verify_pkcs7_signature(). bpf_verify_pkcs7_signature() can be called only from sleepable programs, because of memory allocation (with lookup flag KEY_LOOKUP_CREATE) and crypto operations. For example, the lsm.s/bpf attach point is suitable, fexit/array_map_update_elem is not. A test was added to check the ability of bpf_verify_pkcs7_signature() to verify PKCS#7 signatures from the session keyring, a newly-created keyring, and from the primary and secondary keyring (taking the tcp_bic.ko kernel module for the verification). The test does not fail if that kernel module is not found (needs support from the CI). A consideration was made on whether bpf_verify_pkcs7_signature() should be a simple wrapper, doing as little as possible, or whether it could have more complex logic. Having a simple and flexible wrapper requires two additional helpers, bpf_lookup_user_key() and bpf_key_put(), to search and acquire a key reference, pass that key to the wrapper, and release the reference. More care is also required on the eBPF verifier side, to ensure that an eBPF program always releases an acquired reference. While that gives eBPF developers the greatest flexibility to use the helpers as necessary, it does not match the security of the solution of retrieving the key and using it within the same function, as for example in security/keys/keyctl.c. The risk is that an eBPF program requests a key for a purpose, and then uses the key in a different way with one of the available key-related helpers (to be added in the future). struct key is not like a file descriptor, carrying permissions requested during an open, that can be revalidated at the time a read or write is performed. It is more close to a struct inode, the function using the key cannot know reliably which permission was requested at lookup time. For that reason, the key lookup and usage cannot be separated, as the kernel will guarantee (also to other MAC mechanisms) that once a key has been requested with a specific purpose, it will be used accordingly, beyond the control of eBFP programs. The patch set is organized as follows. Patch 1 exports bpf_dynptr_get_size(), to obtain the real size of data carried by a dynamic pointer. Patch 2 makes available for new eBPF helpers some key-related definitions. Patch 3 fixes the helper prototype regular expression to accept unsigned as type prefix. Patch 4 introduces the bpf_verify_pkcs7_signature() helper and patch 5 adds the corresponding test. Changelog v5: - Move KEY_LOOKUP_ to include/linux/key.h for validation of bpf_verify_pkcs7_signature() parameter - Remove bpf_lookup_user_key() and bpf_key_put() helpers, and the corresponding tests - Replace struct key parameter of bpf_verify_pkcs7_signature() with the keyring serial and lookup flags - Call lookup_user_key() and key_put() in bpf_verify_pkcs7_signature() code, to ensure that the retrieved key is used according to the permission requested at lookup time - Clarified keyring precedence in the description of bpf_verify_pkcs7_signature() (suggested by John) - Remove newline in the second argument of ASSERT_ - Fix helper prototype regular expression in bpf_doc.py v4: - Remove bpf_request_key_by_id(), don't return an invalid pointer that other helpers can use - Pass the keyring ID (without ULONG_MAX, suggested by Alexei) to bpf_verify_pkcs7_signature() - Introduce bpf_lookup_user_key() and bpf_key_put() helpers (suggested by Alexei) - Add lookup_key_norelease test, to ensure that the verifier blocks eBPF programs which don't decrement the key reference count - Parse raw PKCS#7 signature instead of module-style signature in the verify_pkcs7_signature test (suggested by Alexei) - Parse kernel module in user space and pass raw PKCS#7 signature to the eBPF program for signature verification v3: - Rename bpf_verify_signature() back to bpf_verify_pkcs7_signature() to avoid managing different parameters for each signature verification function in one helper (suggested by Daniel) - Use dynamic pointers and export bpf_dynptr_get_size() (suggested by Alexei) - Introduce bpf_request_key_by_id() to give more flexibility to the caller of bpf_verify_pkcs7_signature() to retrieve the appropriate keyring (suggested by Alexei) - Fix test by reordering the gcc command line, always compile sign-file - Improve helper support check mechanism in the test v2: - Rename bpf_verify_pkcs7_signature() to a more generic bpf_verify_signature() and pass the signature type (suggested by KP) - Move the helper and prototype declaration under #ifdef so that user space can probe for support for the helper (suggested by Daniel) - Describe better the keyring types (suggested by Daniel) - Include linux/bpf.h instead of vmlinux.h to avoid implicit or redeclaration - Make the test selfcontained (suggested by Alexei) v1: - Don't define new map flag but introduce simple wrapper of verify_pkcs7_signature() (suggested by Alexei and KP) Roberto Sassu (5): bpf: Export bpf_dynptr_get_size() KEYS: Move KEY_LOOKUP_ to include/linux/key.h scripts: Handle unsigned type prefix in bpf_doc.py bpf: Add bpf_verify_pkcs7_signature() helper selftests/bpf: Add test for bpf_verify_pkcs7_signature() helper include/linux/bpf.h | 1 + include/linux/key.h | 3 + include/uapi/linux/bpf.h | 24 ++ kernel/bpf/bpf_lsm.c | 63 +++ kernel/bpf/helpers.c | 2 +- scripts/bpf_doc.py | 2 +- security/keys/internal.h | 2 - tools/include/uapi/linux/bpf.h | 24 ++ tools/testing/selftests/bpf/Makefile | 14 +- tools/testing/selftests/bpf/config | 2 + .../bpf/prog_tests/verify_pkcs7_sig.c | 359 ++++++++++++++++++ .../bpf/progs/test_verify_pkcs7_sig.c | 79 ++++ .../testing/selftests/bpf/verify_sig_setup.sh | 104 +++++ 13 files changed, 672 insertions(+), 7 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/verify_pkcs7_sig.c create mode 100644 tools/testing/selftests/bpf/progs/test_verify_pkcs7_sig.c create mode 100755 tools/testing/selftests/bpf/verify_sig_setup.sh -- 2.25.1

3 years

3
10
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror