- Linux-kselftest-mirror - lists.linaro.org

[PATCH net-next] selftests: rtnetlink: Use more sensible tos values

by Guillaume Nault

Using tos 0x1 with 'ip route get <IPv4 address> ...' doesn't test much of the tos option handling: 0x1 just sets an ECN bit, which is cleared by inet_rtm_getroute() before doing the fib lookup. Let's use 0x10 instead, which is actually taken into account in the route lookup (and is less surprising for the reader). For consistency, use 0x10 for the IPv6 route lookup too (IPv6 currently doesn't clear ECN bits, but might do so in the future). Signed-off-by: Guillaume Nault <gnault(a)redhat.com> --- No Fixes tag, since this is for net-next and the original test wasn't actually broken in the first place. tools/testing/selftests/net/rtnetlink.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh index c9ce3dfa42ee..0900c5438fbb 100755 --- a/tools/testing/selftests/net/rtnetlink.sh +++ b/tools/testing/selftests/net/rtnetlink.sh @@ -216,9 +216,9 @@ kci_test_route_get() check_err $? ip route get fe80::1 dev "$devdummy" > /dev/null check_err $? - ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x1 mark 0x1 > /dev/null + ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x10 mark 0x1 > /dev/null check_err $? - ip route get ::1 from ::1 iif lo oif lo tos 0x1 mark 0x1 > /dev/null + ip route get ::1 from ::1 iif lo oif lo tos 0x10 mark 0x1 > /dev/null check_err $? ip addr add dev "$devdummy" 10.23.7.11/24 check_err $? -- 2.21.3

3 years, 4 months

2
1
0 0

RFC - kernel test result specification (KTAP)

by Rae Moar

We are looking to further standardise the output format used by kernel test frameworks like kselftest and KUnit. Thus far we have used the TAP (Test Anything Protocol) specification, but it has been extended in many different ways, so we would like to agree on a common "Kernel TAP" (KTAP) format to resolve these differences. Thus, below is a draft of a specification of KTAP. Note that this specification is largely based on the current format of test results for KUnit tests. Additionally, this specification was heavily inspired by the KTAP specification draft by Tim Bird (https://lore.kernel.org/linux-kselftest/CY4PR13MB1175B804E31E502221BC8163FD…). However, there are some notable differences to his specification. One such difference is the format of nested tests is more fully specified in the following specification. However, they are specified in a way which may not be compatible with many kselftest nested tests. ===================== Specification of KTAP ===================== TAP, or the Test Anything Protocol is a format for specifying test results used by a number of projects. It's website and specification are found at: https://testanything.org/. The Linux Kernel uses TAP output for test results. However, KUnit (and other Kernel testing frameworks such as kselftest) have some special needs for test results which don't gel perfectly with the original TAP specification. Thus, a "Kernel TAP" (KTAP) format is specified to extend and alter TAP to support these use-cases. KTAP Output consists of 5 major elements (all line-based): - The version line - Plan lines - Test case result lines - Diagnostic lines - A bail out line An important component in this specification of KTAP is the specification of the format of nested tests. This can be found in the section on nested tests below. The version line ---------------- The first line of KTAP output must be the version line. As this specification documents the first version of KTAP, the recommended version line is "KTAP version 1". However, since all kernel testing frameworks use TAP version lines, "TAP version 14" and "TAP version 13" are all acceptable version lines. Version lines with other versions of TAP or KTAP will not cause the parsing of the test results to fail but it will produce an error. Plan lines ---------- Plan lines must follow the format of "1..N" where N is the number of subtests. The second line of KTAP output must be a plan line, which indicates the number of tests at the highest level, such that the tests do not have a parent. Also, in the instance of a test having subtests, the second line of the test after the subtest header must be a plan line which indicates the number of subtests within that test. Test case result lines ---------------------- Test case result lines must have the format: <result> <number> [-] [<description>] [<directive>] [<diagnostic data>] The result can be either "ok", which indicates the test case passed, or "not ok", which indicates that the test case failed. The number represents the number of the test case or suite being performed. The first test case or suite must have the number 1 and the number must increase by 1 for each additional test case or result at the same level and within the same testing suite. The "-" character is optional. The description is a description of the test, generally the name of the test, and can be any string of words (can't include #). The description is optional. The directive is used to indicate if a test was skipped. The format for the directive is: "# SKIP [<skip_description>]". The skip_description is optional and can be any string of words to describe why the test was skipped. The result of the test case result line can be either "ok" or "not ok" if the skip directive is used. Finally, note that TAP 14 specification includes TODO directives but these are not supported for KTAP. Examples of test case result lines: Test passed: ok 1 - test_case_name Test was skipped: not ok 1 - test_case_name # SKIP test_case_name should be skipped Test failed: not_ok 1 - test_case_name Diagnostic lines ---------------- Diagnostic lines are used for description of testing operations. Diagnostic lines are generally formatted as "# <diagnostic_description>", where the description can be any string. However, in practice, diagnostic lines are all lines that don't follow the format of any other KTAP line format. Diagnostic lines can be anywhere in the test output after the first two lines. There are a few special diagnostic lines. Diagnostic lines of the format "# Subtest: <test_name>" indicate the start of a test with subtests. Also, diagnostic lines of the format "# <test_name>: <description>" refer to a specific test and tend to occur before the test result line of that test but are optional. Bail out line ------------- A bail out line can occur anywhere in the KTAP output and will indicate that a test has crashed. The format of a bail out line is "Bail out! [<description>]", where the description can give information on why the bail out occurred and can be any string. Nested tests ------------ The new specification for KTAP will support an arbitrary number of nested subtests. Thus, tests can now have subtests and those subtests can have subtests. This can be useful to further categorize tests and organize test results. The new required format for a test with subtests consists of: a subtest header line, a plan line, all subtests, and a final test result line. The first line of the test must be the subtest header line with the format: "# Subtest: <test_name>". The second line of the test must be the plan line, which is formatted as "1..N", where N is the number of subtests. Following the plan line, all lines pertaining to the subtests will follow. Finally, the last line of the test is a final test result line with the format: "(ok|not ok) <number> [-] [<description>] [<directive>] [<diagnostic data>]", which follows the same format as the general test result lines described in this section. The result line should indicate the result of the subtests. Thus, if one of the subtests fail, the test should fail. The description in the final test result line should match the name of the test in the subtest header. An example format: KTAP version 1 1..1 # Subtest: test_suite 1..2 ok 1 - test_1 ok 2 - test_2 ok 1 - test_suite An example format with multiple levels of nested testing: KTAP version 1 1..1 # Subtest: test_suite 1..2 # Subtest: sub_test_suite 1..2 ok 1 - test_1 ok 2 test_2 ok 1 - sub_test_suite ok 2 - test ok 1 - test_suite In the instance that the plan line is missing, the end of the test will be denoted by the final result line containing a description that matches the name of the test given in the subtest header. Note that thus, if the plan line is missing and one of the subtests have a matching name to the test suite this will cause errors. Lastly, indentation is also recommended for improved readability. Major differences between TAP 14 and KTAP specification ------------------------------------------------------- Note that the major differences between TAP 14 and KTAP specification: - yaml and json are not allowed in diagnostic messages - TODO directive not allowed - KTAP allows for an arbitrary number of tests to be nested with specified nested test format Example of KTAP --------------- KTAP version 1 1..1 # Subtest: test_suite 1..1 # Subtest: sub_test_suite 1..2 ok 1 - test_1 ok 2 test_2 ok 1 - sub_test_suite ok 1 - test_suite ========================================= Note on incompatibilities with kselftests ========================================= To my knowledge, the above specification seems to generally accept the TAP format of many non-nested test results of kselftests. An example of a common kselftests TAP format for non-nested test results that are accepted by the above specification: TAP version 13 1..2 # selftests: vDSO: vdso_test_gettimeofday # The time is 1628024856.096879 ok 1 selftests: vDSO: vdso_test_gettimeofday # selftests: vDSO: vdso_test_getcpu # Could not find __vdso_getcpu ok 2 selftests: vDSO: vdso_test_getcpu # SKIP However, one major difference noted with kselftests is the use of more directives than the "# SKIP" directive. kselftest also supports XPASS and XFAIL directives. Some additional examples found in kselftests: not ok 5 selftests: netfilter: nft_concat_range.sh # TIMEOUT 45 seconds not ok 45 selftests: kvm: kvm_binary_stats_test # exit=127 Should the specification be expanded to include these directives? However, the general format for kselftests with nested test results seems to differ from the above specification. It seems that a general format for nested tests is as follows: TAP version 13 1..2 # selftests: membarrier: membarrier_test_single_thread # TAP version 13 # 1..2 # ok 1 sys_membarrier available # ok 2 sys membarrier invalid command test: command = -1, flags = 0, errno = 22. Failed as expected ok 1 selftests: membarrier: membarrier_test_single_thread # selftests: membarrier: membarrier_test_multi_thread # TAP version 13 # 1..2 # ok 1 sys_membarrier available # ok 2 sys membarrier invalid command test: command = -1, flags = 0, errno = 22. Failed as expected ok 2 selftests: membarrier: membarrier_test_multi_thread The major differences here, that do not match the above specification, are use of "# " as an indentation and using a TAP version line to denote a new test with subtests rather than the subtest header line described above. If these are widely utilized formats in kselftests, should we include both versions in the specification or should we attempt to agree on a single format for nested tests? I personally believe we should try to agree on a single format for nested tests. This would allow for a cleaner specification of KTAP and would reduce possible confusion. ==== So what do people think about the above specification? How should we handle the differences with kselftests? If this specification is accepted, where should the specification be documented?

3 years, 4 months

7
13
0 0

[GIT PULL] Kselftest fixes update for Linux 5.17-rc3

by Shuah Khan

Hi Linus, Please pull the following Kselftest fixes update for Linux 5.17-rc3 This Kselftest fixes update for Linux 5.17-rc3 consists of important fixes to several tests and documentation clarification on running mainline kselftest on stable releases. A few notable fixes: - fix kselftest run hang due to child processes that haven't been terminated. Fix signals all child processes - fix false pass/fail results from vdso_test_abi, openat2, mincore - build failures when using -j (multiple jobs) option - exec test build failure due to incorrect build rule for a run-time created "pipe" - zram test fixes related to interaction with zram-generator to make sure zram test to coordinate deleted with zram-generator - zram test compression ratio calculation fix and skipping max_comp_streams. - increasing rtc test timeout - cpufreq test to write test results to stdout which will necessary on automated test systems diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit e783362eb54cd99b2cac8b3a9aeac942e6f6ac07: Linux 5.17-rc1 (2022-01-23 10:12:53 +0200) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-fixes-5.17-rc3 for you to fetch changes up to ec049891b2dc16591813eacaddc476b3d27c8c14: kselftest: Fix vdso_test_abi return status (2022-01-31 10:35:14 -0700) ---------------------------------------------------------------- linux-kselftest-fixes-5.17-rc3 This Kselftest fixes update for Linux 5.17-rc3 consists of important fixes to several tests and documentation clarification on running mainline kselftest on stable releases. A few notable fixes: - fix kselftest run hang due to child processes that haven't been terminated. Fix signals all child processes - fix false pass/fail results from vdso_test_abi, openat2, mincore - build failures when using -j (multiple jobs) option - exec test build failure due to incorrect build rule for a run-time created "pipe" - zram test fixes related to interaction with zram-generator to make sure zram test to coordinate deleted with zram-generator - zram test compression ratio calculation fix and skipping max_comp_streams. - increasing rtc test timeout - cpufreq test to write test results to stdout which will necessary on automated test systems ---------------------------------------------------------------- Cristian Marussi (4): selftests: openat2: Print also errno in failure messages selftests: openat2: Add missing dependency in Makefile selftests: openat2: Skip testcases that fail with EOPNOTSUPP selftests: skip mincore.check_file_mmap when fs lacks needed support Li Zhijian (1): kselftest: signal all child processes Muhammad Usama Anjum (2): selftests/exec: Remove pipe from TEST_GEN_FILES selftests: futex: Use variable MAKE instead of make Nícolas F. R. A. Prado (2): selftests: rtc: Increase test timeout so that all tests run selftests: cpufreq: Write test output to stdout as well Shuah Khan (1): docs/kselftest: clarify running mainline tests on stables Vincenzo Frascino (1): kselftest: Fix vdso_test_abi return status Yang Xu (3): selftests/zram: Skip max_comp_streams interface on newer kernel selftests/zram01.sh: Fix compression ratio calculation selftests/zram: Adapt the situation that /dev/zram0 is being used Documentation/dev-tools/kselftest.rst | 8 ++ tools/testing/selftests/cpufreq/main.sh | 2 +- tools/testing/selftests/exec/Makefile | 2 +- tools/testing/selftests/futex/Makefile | 4 +- tools/testing/selftests/kselftest_harness.h | 4 +- tools/testing/selftests/mincore/mincore_selftest.c | 20 ++- tools/testing/selftests/openat2/Makefile | 2 +- tools/testing/selftests/openat2/helpers.h | 12 +- tools/testing/selftests/openat2/openat2_test.c | 12 +- tools/testing/selftests/rtc/settings | 2 +- tools/testing/selftests/vDSO/vdso_test_abi.c | 135 ++++++++++----------- tools/testing/selftests/zram/zram.sh | 15 +-- tools/testing/selftests/zram/zram01.sh | 33 ++--- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 134 +++++++++++++------- 15 files changed, 209 insertions(+), 177 deletions(-) ----------------------------------------------------------------

3 years, 4 months

2
1
0 0

kselftest tree on kernelci.org

by Guillaume Tucker

Hi Shuah, I've made this PR to start monitoring the "fixes" branch from the kselftest tree on kernelci.org: https://github.com/kernelci/kernelci-core/pull/998 While kselftest changes eventually land in linux-next, monitoring your tree directly means we can test it earlier and potentially enable more build variants or experimental tests. Since kernelci.org also builds and runs some kselftests we're regularly finding issues and people are sending fixes for them. See this recent story for example: https://twitter.com/kernelci/status/1488831497259921409 Keeping an eye on kselftest patches with kernelci.org means we can verify that fixes do what they're supposed to do with a much larger test coverage than what individual developers can do. We've been applying kselftest fixes on a branch managed by kernelci.org to verify them in the past, but having the actual kselftest tree part of the workflow would seem much better. There are several branches in your tree, while "fixes" seemed like the most useful one to pick I see there is also a "kernelci" branch too but it hasn't been updated for a while, reviving it could give you the possibility to test patches through kernelci.org before applying them on other branches that get pulled into linux-next and mainline. Many things could potentially be done with arbitrary builds and tests etc. These are some initial suggestions. How does this sound? Best wishes, Guillaume

3 years, 4 months

2
3
0 0

[PATCH v2 net-next 5/5] selftests: net: bridge: Parameterize ageing timeout

by Tobias Waldekranz

Allow the ageing timeout that is set on bridges to be customized from forwarding.config. This allows the tests to be run on hardware which does not support a 10s timeout (e.g. mv88e6xxx). Signed-off-by: Tobias Waldekranz <tobias(a)waldekranz.com> Reviewed-by: Petr Machata <petrm(a)nvidia.com> --- tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh | 5 +++-- .../testing/selftests/net/forwarding/bridge_vlan_unaware.sh | 5 +++-- .../selftests/net/forwarding/forwarding.config.sample | 2 ++ tools/testing/selftests/net/forwarding/lib.sh | 1 + 4 files changed, 9 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh index b90dff8d3a94..64bd00fe9a4f 100755 --- a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh @@ -28,8 +28,9 @@ h2_destroy() switch_create() { - # 10 Seconds ageing time. - ip link add dev br0 type bridge vlan_filtering 1 ageing_time 1000 \ + ip link add dev br0 type bridge \ + vlan_filtering 1 \ + ageing_time $LOW_AGEING_TIME \ mcast_snooping 0 ip link set dev $swp1 master br0 diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh index c15c6c85c984..1c8a26046589 100755 --- a/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh @@ -27,8 +27,9 @@ h2_destroy() switch_create() { - # 10 Seconds ageing time. - ip link add dev br0 type bridge ageing_time 1000 mcast_snooping 0 + ip link add dev br0 type bridge \ + ageing_time $LOW_AGEING_TIME \ + mcast_snooping 0 ip link set dev $swp1 master br0 ip link set dev $swp2 master br0 diff --git a/tools/testing/selftests/net/forwarding/forwarding.config.sample b/tools/testing/selftests/net/forwarding/forwarding.config.sample index b0980a2efa31..4a546509de90 100644 --- a/tools/testing/selftests/net/forwarding/forwarding.config.sample +++ b/tools/testing/selftests/net/forwarding/forwarding.config.sample @@ -41,6 +41,8 @@ NETIF_CREATE=yes # Timeout (in seconds) before ping exits regardless of how many packets have # been sent or received PING_TIMEOUT=5 +# Minimum ageing_time (in centiseconds) supported by hardware +LOW_AGEING_TIME=1000 # Flag for tc match, supposed to be skip_sw/skip_hw which means do not process # filter by software/hardware TC_FLAG=skip_hw diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 7da783d6f453..e7e434a4758b 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -24,6 +24,7 @@ PING_COUNT=${PING_COUNT:=10} PING_TIMEOUT=${PING_TIMEOUT:=5} WAIT_TIMEOUT=${WAIT_TIMEOUT:=20} INTERFACE_TIMEOUT=${INTERFACE_TIMEOUT:=600} +LOW_AGEING_TIME=${LOW_AGEING_TIME:=1000} REQUIRE_JQ=${REQUIRE_JQ:=yes} REQUIRE_MZ=${REQUIRE_MZ:=yes} -- 2.25.1

3 years, 4 months

1
0
0 0

[PATCH 0/2] KVM: selftests: Add powerpc support

by Fabiano Rosas

This series adds the initial support for ppc64le Book3s with Radix MMU. At this time I'm including only the kvm_page_table test and a dummy test to serve as a sample of what can be done with these tests. I intend to make a pass over the remaining common tests and add the ones which could be built for powerpc as well. patch 1: a prerequisite small fix for the powerpc vcpu_ioctl. It is the same I already sent to the ppc mailing list but I'll include it here to make this a complete series. patch 2: the actual infrastructure support. Fabiano Rosas (2): KVM: PPC: Book3S HV: Stop returning internal values to userspace KVM: selftests: Add support for ppc64le MAINTAINERS | 3 + arch/powerpc/kvm/powerpc.c | 8 + tools/testing/selftests/kvm/.gitignore | 1 + tools/testing/selftests/kvm/Makefile | 14 +- .../selftests/kvm/include/kvm_util_base.h | 7 + .../selftests/kvm/include/ppc64le/processor.h | 43 +++ tools/testing/selftests/kvm/lib/kvm_util.c | 5 + .../testing/selftests/kvm/lib/powerpc/hcall.S | 6 + .../selftests/kvm/lib/powerpc/processor.c | 343 ++++++++++++++++++ .../testing/selftests/kvm/lib/powerpc/ucall.c | 67 ++++ .../selftests/kvm/powerpc/sample_test.c | 144 ++++++++ 11 files changed, 638 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/ppc64le/processor.h create mode 100644 tools/testing/selftests/kvm/lib/powerpc/hcall.S create mode 100644 tools/testing/selftests/kvm/lib/powerpc/processor.c create mode 100644 tools/testing/selftests/kvm/lib/powerpc/ucall.c create mode 100644 tools/testing/selftests/kvm/powerpc/sample_test.c -- 2.34.1

3 years, 4 months

3
4
0 0

[GIT PULL] KUnit fixes update for Linux 5.17-rc3

by Shuah Khan

Hi Linus, Please pull the following KUnit fixes update for Linux 5.17-rc3. This kunit update for Linux 5.17-rc3 consists of a single fix to an error seen on qemu due to a missing import. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit e783362eb54cd99b2cac8b3a9aeac942e6f6ac07: Linux 5.17-rc1 (2022-01-23 10:12:53 +0200) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-kunit-fixes-5.17-rc3 for you to fetch changes up to 235528072f28b3b0a1446279b7eaddda36dbf743: kunit: tool: Import missing importlib.abc (2022-01-25 12:59:43 -0700) ---------------------------------------------------------------- linux-kselftest-kunit-fixes-5.17-rc3 This kunit update for Linux 5.17-rc3 consists of a single fix to an error seen on qemu due to a missing import. ---------------------------------------------------------------- Michał Winiarski (1): kunit: tool: Import missing importlib.abc tools/testing/kunit/kunit_kernel.py | 1 + 1 file changed, 1 insertion(+) ----------------------------------------------------------------

3 years, 4 months

2
1
0 0

[PATCH] selftests: fixup build warnings in pidfd / clone3 tests

by Axel Rasmussen

These are some trivial fixups, which were needed to build the tests with clang and -Werror. The following issues are fixed: - Remove various unused variables. - In child_poll_leader_exit_test, clang isn't smart enough to realize syscall(SYS_exit, 0) won't return, so it complains we never return from a non-void function. Add an extra exit(0) to appease it. - In test_pidfd_poll_leader_exit, ret may be branched on despite being uninitialized, if we have !use_waitpid. Initialize it to zero to get the right behavior in that case. Signed-off-by: Axel Rasmussen <axelrasmussen(a)google.com> --- tools/testing/selftests/clone3/clone3.c | 2 -- tools/testing/selftests/pidfd/pidfd_test.c | 6 +++--- tools/testing/selftests/pidfd/pidfd_wait.c | 5 ++--- 3 files changed, 5 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/clone3/clone3.c b/tools/testing/selftests/clone3/clone3.c index 076cf4325f78..cd4582129c7d 100644 --- a/tools/testing/selftests/clone3/clone3.c +++ b/tools/testing/selftests/clone3/clone3.c @@ -126,8 +126,6 @@ static void test_clone3(uint64_t flags, size_t size, int expected, int main(int argc, char *argv[]) { - pid_t pid; - uid_t uid = getuid(); ksft_print_header(); diff --git a/tools/testing/selftests/pidfd/pidfd_test.c b/tools/testing/selftests/pidfd/pidfd_test.c index 529eb700ac26..9a2d64901d59 100644 --- a/tools/testing/selftests/pidfd/pidfd_test.c +++ b/tools/testing/selftests/pidfd/pidfd_test.c @@ -441,7 +441,6 @@ static void test_pidfd_poll_exec(int use_waitpid) { int pid, pidfd = 0; int status, ret; - pthread_t t1; time_t prog_start = time(NULL); const char *test_name = "pidfd_poll check for premature notification on child thread exec"; @@ -500,13 +499,14 @@ static int child_poll_leader_exit_test(void *args) */ *child_exit_secs = time(NULL); syscall(SYS_exit, 0); + /* Never reached, but appeases compiler thinking we should return. */ + exit(0); } static void test_pidfd_poll_leader_exit(int use_waitpid) { int pid, pidfd = 0; - int status, ret; - time_t prog_start = time(NULL); + int status, ret = 0; const char *test_name = "pidfd_poll check for premature notification on non-empty" "group leader exit"; diff --git a/tools/testing/selftests/pidfd/pidfd_wait.c b/tools/testing/selftests/pidfd/pidfd_wait.c index be2943f072f6..17999e082aa7 100644 --- a/tools/testing/selftests/pidfd/pidfd_wait.c +++ b/tools/testing/selftests/pidfd/pidfd_wait.c @@ -39,7 +39,7 @@ static int sys_waitid(int which, pid_t pid, siginfo_t *info, int options, TEST(wait_simple) { - int pidfd = -1, status = 0; + int pidfd = -1; pid_t parent_tid = -1; struct clone_args args = { .parent_tid = ptr_to_u64(&parent_tid), @@ -47,7 +47,6 @@ TEST(wait_simple) .flags = CLONE_PIDFD | CLONE_PARENT_SETTID, .exit_signal = SIGCHLD, }; - int ret; pid_t pid; siginfo_t info = { .si_signo = 0, @@ -88,7 +87,7 @@ TEST(wait_simple) TEST(wait_states) { - int pidfd = -1, status = 0; + int pidfd = -1; pid_t parent_tid = -1; struct clone_args args = { .parent_tid = ptr_to_u64(&parent_tid), -- 2.35.0.rc2.247.g8bbb082509-goog

3 years, 4 months

3
2
0 0

[PATCH] pidfd: fix test failure due to stack overflow on some arches

by Axel Rasmussen

When running the pidfd_fdinfo_test on arm64, it fails for me. After some digging, the reason is that the child exits due to SIGBUS, because it overflows the 1024 byte stack we've reserved for it. To fix the issue, increase the stack size to 8192 bytes (this number is somewhat arbitrary, and was arrived at through experimentation -- I kept doubling until the failure no longer occurred). Also, let's make the issue easier to debug. wait_for_pid() returns an ambiguous value: it may return -1 in all of these cases: 1. waitpid() itself returned -1 2. waitpid() returned success, but we found !WIFEXITED(status). 3. The child process exited, but it did so with a -1 exit code. There's no way for the caller to tell the difference. So, at least log which occurred, so the test runner can debug things. While debugging this, I found that we had !WIFEXITED(), because the child exited due to a signal. This seems like a reasonably common case, so also print out whether or not we have WIFSIGNALED(), and the associated WTERMSIG() (if any). This lets us see the SIGBUS I'm fixing clearly when it occurs. Finally, I'm suspicious of allocating the child's stack on our stack. man clone(2) suggests that the correct way to do this is with mmap(), and in particular by setting MAP_STACK. So, switch to doing it that way instead. Signed-off-by: Axel Rasmussen <axelrasmussen(a)google.com> --- tools/testing/selftests/pidfd/pidfd.h | 13 ++++++++--- .../selftests/pidfd/pidfd_fdinfo_test.c | 22 +++++++++++++++---- 2 files changed, 28 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/pidfd/pidfd.h b/tools/testing/selftests/pidfd/pidfd.h index 01f8d3c0cf2c..6922d6417e1c 100644 --- a/tools/testing/selftests/pidfd/pidfd.h +++ b/tools/testing/selftests/pidfd/pidfd.h @@ -68,7 +68,7 @@ #define PIDFD_SKIP 3 #define PIDFD_XFAIL 4 -int wait_for_pid(pid_t pid) +static inline int wait_for_pid(pid_t pid) { int status, ret; @@ -78,13 +78,20 @@ int wait_for_pid(pid_t pid) if (errno == EINTR) goto again; + ksft_print_msg("waitpid returned -1, errno=%d\n", errno); return -1; } - if (!WIFEXITED(status)) + if (!WIFEXITED(status)) { + ksft_print_msg( + "waitpid !WIFEXITED, WIFSIGNALED=%d, WTERMSIG=%d\n", + WIFSIGNALED(status), WTERMSIG(status)); return -1; + } - return WEXITSTATUS(status); + ret = WEXITSTATUS(status); + ksft_print_msg("waitpid WEXITSTATUS=%d\n", ret); + return ret; } static inline int sys_pidfd_open(pid_t pid, unsigned int flags) diff --git a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c index 22558524f71c..3fd8e903118f 100644 --- a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c +++ b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c @@ -12,6 +12,7 @@ #include <string.h> #include <syscall.h> #include <sys/wait.h> +#include <sys/mman.h> #include "pidfd.h" #include "../kselftest.h" @@ -80,7 +81,10 @@ static inline int error_check(struct error *err, const char *test_name) return err->code; } +#define CHILD_STACK_SIZE 8192 + struct child { + char *stack; pid_t pid; int fd; }; @@ -89,17 +93,22 @@ static struct child clone_newns(int (*fn)(void *), void *args, struct error *err) { static int flags = CLONE_PIDFD | CLONE_NEWPID | CLONE_NEWNS | SIGCHLD; - size_t stack_size = 1024; - char *stack[1024] = { 0 }; struct child ret; if (!(flags & CLONE_NEWUSER) && geteuid() != 0) flags |= CLONE_NEWUSER; + ret.stack = mmap(NULL, CHILD_STACK_SIZE, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0); + if (ret.stack == MAP_FAILED) { + error_set(err, -1, "mmap of stack failed (errno %d)", errno); + return ret; + } + #ifdef __ia64__ - ret.pid = __clone2(fn, stack, stack_size, flags, args, &ret.fd); + ret.pid = __clone2(fn, ret.stack, CHILD_STACK_SIZE, flags, args, &ret.fd); #else - ret.pid = clone(fn, stack + stack_size, flags, args, &ret.fd); + ret.pid = clone(fn, ret.stack + CHILD_STACK_SIZE, flags, args, &ret.fd); #endif if (ret.pid < 0) { @@ -129,6 +138,11 @@ static inline int child_join(struct child *child, struct error *err) else if (r > 0) error_set(err, r, "child %d reported: %d", child->pid, r); + if (munmap(child->stack, CHILD_STACK_SIZE)) { + error_set(err, -1, "munmap of child stack failed (errno %d)", errno); + r = -1; + } + return r; } -- 2.35.0.rc2.247.g8bbb082509-goog

3 years, 4 months

3
2
0 0

[PATCH v2 1/2] kselftest: alsa: Check for event generation when we write to controls

by Mark Brown

Add some coverage of event generation to mixer-test. Rather than doing a separate set of writes designed to trigger events we add a step to the existing write_and_verify() which checks to see if the value we read back from non-volatile controls matches the value before writing and that an event is or isn't generated as appropriate. The "tests" for events then simply check that no spurious or missing events were detected. This avoids needing further logic to generate appropriate values for each control type and maximises coverage. When checking for events we use a timeout of 0. This relies on the kernel generating any event prior to returning to userspace when setting a control. That is currently the case and it is difficult to see it changing, if it does the test will need to be updated. Using a delay of 0 means that we don't slow things down unduly when checking for no event or when events fail to be generated. We don't check behaviour for volatile controls since we can't tell what the behaviour is supposed to be for any given control. Signed-off-by: Mark Brown <broonie(a)kernel.org> Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> --- v2: - Get the numid from the API rather than using the control index. tools/testing/selftests/alsa/mixer-test.c | 148 +++++++++++++++++++++- 1 file changed, 145 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c index 0e88f4f3d802..79ffbca429ee 100644 --- a/tools/testing/selftests/alsa/mixer-test.c +++ b/tools/testing/selftests/alsa/mixer-test.c @@ -3,7 +3,7 @@ // kselftest for the ALSA mixer API // // Original author: Mark Brown <broonie(a)kernel.org> -// Copyright (c) 2021 Arm Limited +// Copyright (c) 2021-2 Arm Limited // This test will iterate over all cards detected in the system, exercising // every mixer control it can find. This may conflict with other system @@ -27,11 +27,12 @@ #include "../kselftest.h" -#define TESTS_PER_CONTROL 4 +#define TESTS_PER_CONTROL 6 struct card_data { snd_ctl_t *handle; int card; + struct pollfd pollfd; int num_ctls; snd_ctl_elem_list_t *ctls; struct card_data *next; @@ -43,6 +44,8 @@ struct ctl_data { snd_ctl_elem_info_t *info; snd_ctl_elem_value_t *def_val; int elem; + int event_missing; + int event_spurious; struct card_data *card; struct ctl_data *next; }; @@ -149,6 +152,7 @@ void find_controls(void) if (!ctl_data) ksft_exit_fail_msg("Out of memory\n"); + memset(ctl_data, 0, sizeof(*ctl_data)); ctl_data->card = card_data; ctl_data->elem = ctl; ctl_data->name = snd_ctl_elem_list_get_name(card_data->ctls, @@ -184,6 +188,26 @@ void find_controls(void) ctl_list = ctl_data; } + /* Set up for events */ + err = snd_ctl_subscribe_events(card_data->handle, true); + if (err < 0) { + ksft_exit_fail_msg("snd_ctl_subscribe_events() failed for card %d: %d\n", + card, err); + } + + err = snd_ctl_poll_descriptors_count(card_data->handle); + if (err != 1) { + ksft_exit_fail_msg("Unexpected desciptor count %d for card %d\n", + err, card); + } + + err = snd_ctl_poll_descriptors(card_data->handle, + &card_data->pollfd, 1); + if (err != 1) { + ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n", + card, err); + } + next_card: if (snd_card_next(&card) < 0) { ksft_print_msg("snd_card_next"); @@ -194,6 +218,73 @@ void find_controls(void) snd_config_delete(config); } +/* + * Block for up to timeout ms for an event, returns a negative value + * on error, 0 for no event and 1 for an event. + */ +int wait_for_event(struct ctl_data *ctl, int timeout) +{ + unsigned short revents; + snd_ctl_event_t *event; + int count, err; + unsigned int mask = 0; + unsigned int ev_id; + + snd_ctl_event_alloca(&event); + + do { + err = poll(&(ctl->card->pollfd), 1, timeout); + if (err < 0) { + ksft_print_msg("poll() failed for %s: %s (%d)\n", + ctl->name, strerror(errno), errno); + return -1; + } + /* Timeout */ + if (err == 0) + return 0; + + err = snd_ctl_poll_descriptors_revents(ctl->card->handle, + &(ctl->card->pollfd), + 1, &revents); + if (err < 0) { + ksft_print_msg("snd_ctl_poll_desciptors_revents() failed for %s: %d\n", + ctl->name, err); + return err; + } + if (revents & POLLERR) { + ksft_print_msg("snd_ctl_poll_desciptors_revents() reported POLLERR for %s\n", + ctl->name); + return -1; + } + /* No read events */ + if (!(revents & POLLIN)) { + ksft_print_msg("No POLLIN\n"); + continue; + } + + err = snd_ctl_read(ctl->card->handle, event); + if (err < 0) { + ksft_print_msg("snd_ctl_read() failed for %s: %d\n", + ctl->name, err); + return err; + } + + if (snd_ctl_event_get_type(event) != SND_CTL_EVENT_ELEM) + continue; + + /* The ID returned from the event is 1 less than numid */ + mask = snd_ctl_event_elem_get_mask(event); + ev_id = snd_ctl_event_elem_get_numid(event); + if (ev_id != snd_ctl_elem_info_get_numid(ctl->info)) { + ksft_print_msg("Event for unexpected ctl %s\n", + snd_ctl_event_elem_get_name(event)); + continue; + } + } while ((mask & SND_CTL_EVENT_MASK_VALUE) != SND_CTL_EVENT_MASK_VALUE); + + return 1; +} + bool ctl_value_index_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val, int index) { @@ -428,7 +519,8 @@ int write_and_verify(struct ctl_data *ctl, { int err, i; bool error_expected, mismatch_shown; - snd_ctl_elem_value_t *read_val, *w_val; + snd_ctl_elem_value_t *initial_val, *read_val, *w_val; + snd_ctl_elem_value_alloca(&initial_val); snd_ctl_elem_value_alloca(&read_val); snd_ctl_elem_value_alloca(&w_val); @@ -446,6 +538,18 @@ int write_and_verify(struct ctl_data *ctl, snd_ctl_elem_value_copy(expected_val, write_val); } + /* Store the value before we write */ + if (snd_ctl_elem_info_is_readable(ctl->info)) { + snd_ctl_elem_value_set_id(initial_val, ctl->id); + + err = snd_ctl_elem_read(ctl->card->handle, initial_val); + if (err < 0) { + ksft_print_msg("snd_ctl_elem_read() failed: %s\n", + snd_strerror(err)); + return err; + } + } + /* * Do the write, if we have an expected value ignore the error * and carry on to validate the expected value. @@ -470,6 +574,30 @@ int write_and_verify(struct ctl_data *ctl, return err; } + /* + * Check for an event if the value changed, or confirm that + * there was none if it didn't. We rely on the kernel + * generating the notification before it returns from the + * write, this is currently true, should that ever change this + * will most likely break and need updating. + */ + if (!snd_ctl_elem_info_is_volatile(ctl->info)) { + err = wait_for_event(ctl, 0); + if (snd_ctl_elem_value_compare(initial_val, read_val)) { + if (err < 1) { + ksft_print_msg("No event generated for %s\n", + ctl->name); + ctl->event_missing++; + } + } else { + if (err != 0) { + ksft_print_msg("Spurious event generated for %s\n", + ctl->name); + ctl->event_spurious++; + } + } + } + /* * Use the libray to compare values, if there's a mismatch * carry on and try to provide a more useful diagnostic than @@ -898,6 +1026,18 @@ void test_ctl_write_invalid(struct ctl_data *ctl) ctl->card->card, ctl->elem); } +void test_ctl_event_missing(struct ctl_data *ctl) +{ + ksft_test_result(!ctl->event_missing, "event_missing.%d.%d\n", + ctl->card->card, ctl->elem); +} + +void test_ctl_event_spurious(struct ctl_data *ctl) +{ + ksft_test_result(!ctl->event_spurious, "event_spurious.%d.%d\n", + ctl->card->card, ctl->elem); +} + int main(void) { struct ctl_data *ctl; @@ -917,6 +1057,8 @@ int main(void) test_ctl_write_default(ctl); test_ctl_write_valid(ctl); test_ctl_write_invalid(ctl); + test_ctl_event_missing(ctl); + test_ctl_event_spurious(ctl); } ksft_exit_pass(); -- 2.30.2

3 years, 4 months

2
3
0 0

[PATCH] kselftest: alsa: Check for event generation when we write to controls

by Mark Brown

Add some coverage of event generation to mixer-test. Rather than doing a separate set of writes designed to trigger events we add a step to the existing write_and_verify() which checks to see if the value we read back from non-volatile controls matches the value before writing and that an event is or isn't generated as appropriate. The "tests" for events then simply check that no spurious or missing events were detected. This avoids needing further logic to generate appropriate values for each control type and maximises coverage. When checking for events we use a timeout of 0. This relies on the kernel generating any event prior to returning to userspace when setting a control. That is currently the case and it is difficult to see it changing, if it does the test will need to be updated. Using a delay of 0 means that we don't slow things down unduly when checking for no event or when events fail to be generated. We don't check behaviour for volatile controls since we can't tell what the behaviour is supposed to be for any given control. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/alsa/mixer-test.c | 148 +++++++++++++++++++++- 1 file changed, 145 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c index 0e88f4f3d802..42cf3b724586 100644 --- a/tools/testing/selftests/alsa/mixer-test.c +++ b/tools/testing/selftests/alsa/mixer-test.c @@ -3,7 +3,7 @@ // kselftest for the ALSA mixer API // // Original author: Mark Brown <broonie(a)kernel.org> -// Copyright (c) 2021 Arm Limited +// Copyright (c) 2021-2 Arm Limited // This test will iterate over all cards detected in the system, exercising // every mixer control it can find. This may conflict with other system @@ -27,11 +27,12 @@ #include "../kselftest.h" -#define TESTS_PER_CONTROL 4 +#define TESTS_PER_CONTROL 6 struct card_data { snd_ctl_t *handle; int card; + struct pollfd pollfd; int num_ctls; snd_ctl_elem_list_t *ctls; struct card_data *next; @@ -43,6 +44,8 @@ struct ctl_data { snd_ctl_elem_info_t *info; snd_ctl_elem_value_t *def_val; int elem; + int event_missing; + int event_spurious; struct card_data *card; struct ctl_data *next; }; @@ -149,6 +152,7 @@ void find_controls(void) if (!ctl_data) ksft_exit_fail_msg("Out of memory\n"); + memset(ctl_data, 0, sizeof(*ctl_data)); ctl_data->card = card_data; ctl_data->elem = ctl; ctl_data->name = snd_ctl_elem_list_get_name(card_data->ctls, @@ -184,6 +188,26 @@ void find_controls(void) ctl_list = ctl_data; } + /* Set up for events */ + err = snd_ctl_subscribe_events(card_data->handle, true); + if (err < 0) { + ksft_exit_fail_msg("snd_ctl_subscribe_events() failed for card %d: %d\n", + card, err); + } + + err = snd_ctl_poll_descriptors_count(card_data->handle); + if (err != 1) { + ksft_exit_fail_msg("Unexpected desciptor count %d for card %d\n", + err, card); + } + + err = snd_ctl_poll_descriptors(card_data->handle, + &card_data->pollfd, 1); + if (err != 1) { + ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n", + card, err); + } + next_card: if (snd_card_next(&card) < 0) { ksft_print_msg("snd_card_next"); @@ -194,6 +218,73 @@ void find_controls(void) snd_config_delete(config); } +/* + * Block for up to timeout ms for an event, returns a negative value + * on error, 0 for no event and 1 for an event. + */ +int wait_for_event(struct ctl_data *ctl, int timeout) +{ + unsigned short revents; + snd_ctl_event_t *event; + int count, err; + unsigned int mask = 0; + unsigned int ev_id; + + snd_ctl_event_alloca(&event); + + do { + err = poll(&(ctl->card->pollfd), 1, timeout); + if (err < 0) { + ksft_print_msg("poll() failed for %s: %s (%d)\n", + ctl->name, strerror(errno), errno); + return -1; + } + /* Timeout */ + if (err == 0) + return 0; + + err = snd_ctl_poll_descriptors_revents(ctl->card->handle, + &(ctl->card->pollfd), + 1, &revents); + if (err < 0) { + ksft_print_msg("snd_ctl_poll_desciptors_revents() failed for %s: %d\n", + ctl->name, err); + return err; + } + if (revents & POLLERR) { + ksft_print_msg("snd_ctl_poll_desciptors_revents() reported POLLERR for %s\n", + ctl->name); + return -1; + } + /* No read events */ + if (!(revents & POLLIN)) { + ksft_print_msg("No POLLIN\n"); + continue; + } + + err = snd_ctl_read(ctl->card->handle, event); + if (err < 0) { + ksft_print_msg("snd_ctl_read() failed for %s: %d\n", + ctl->name, err); + return err; + } + + if (snd_ctl_event_get_type(event) != SND_CTL_EVENT_ELEM) + continue; + + /* The ID returned from the event is 1 less than numid */ + mask = snd_ctl_event_elem_get_mask(event); + ev_id = snd_ctl_event_elem_get_numid(event); + if (ev_id != ctl->elem + 1) { + ksft_print_msg("Event for unexpected ctl %s\n", + snd_ctl_event_elem_get_name(event)); + continue; + } + } while ((mask & SND_CTL_EVENT_MASK_VALUE) != SND_CTL_EVENT_MASK_VALUE); + + return 1; +} + bool ctl_value_index_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val, int index) { @@ -428,7 +519,8 @@ int write_and_verify(struct ctl_data *ctl, { int err, i; bool error_expected, mismatch_shown; - snd_ctl_elem_value_t *read_val, *w_val; + snd_ctl_elem_value_t *initial_val, *read_val, *w_val; + snd_ctl_elem_value_alloca(&initial_val); snd_ctl_elem_value_alloca(&read_val); snd_ctl_elem_value_alloca(&w_val); @@ -446,6 +538,18 @@ int write_and_verify(struct ctl_data *ctl, snd_ctl_elem_value_copy(expected_val, write_val); } + /* Store the value before we write */ + if (snd_ctl_elem_info_is_readable(ctl->info)) { + snd_ctl_elem_value_set_id(initial_val, ctl->id); + + err = snd_ctl_elem_read(ctl->card->handle, initial_val); + if (err < 0) { + ksft_print_msg("snd_ctl_elem_read() failed: %s\n", + snd_strerror(err)); + return err; + } + } + /* * Do the write, if we have an expected value ignore the error * and carry on to validate the expected value. @@ -470,6 +574,30 @@ int write_and_verify(struct ctl_data *ctl, return err; } + /* + * Check for an event if the value changed, or confirm that + * there was none if it didn't. We rely on the kernel + * generating the notification before it returns from the + * write, this is currently true, should that ever change this + * will most likely break and need updating. + */ + if (!snd_ctl_elem_info_is_volatile(ctl->info)) { + err = wait_for_event(ctl, 0); + if (snd_ctl_elem_value_compare(initial_val, read_val)) { + if (err < 1) { + ksft_print_msg("No event generated for %s\n", + ctl->name); + ctl->event_missing++; + } + } else { + if (err != 0) { + ksft_print_msg("Spurious event generated for %s\n", + ctl->name); + ctl->event_spurious++; + } + } + } + /* * Use the libray to compare values, if there's a mismatch * carry on and try to provide a more useful diagnostic than @@ -898,6 +1026,18 @@ void test_ctl_write_invalid(struct ctl_data *ctl) ctl->card->card, ctl->elem); } +void test_ctl_event_missing(struct ctl_data *ctl) +{ + ksft_test_result(!ctl->event_missing, "event_missing.%d.%d\n", + ctl->card->card, ctl->elem); +} + +void test_ctl_event_spurious(struct ctl_data *ctl) +{ + ksft_test_result(!ctl->event_spurious, "event_spurious.%d.%d\n", + ctl->card->card, ctl->elem); +} + int main(void) { struct ctl_data *ctl; @@ -917,6 +1057,8 @@ int main(void) test_ctl_write_default(ctl); test_ctl_write_valid(ctl); test_ctl_write_invalid(ctl); + test_ctl_event_missing(ctl); + test_ctl_event_spurious(ctl); } ksft_exit_pass(); -- 2.30.2

3 years, 4 months

3
5
0 0

Prezentacja

by Mateusz Talaga

Dzień dobry! Czy mógłbym przedstawić rozwiązanie, które umożliwia monitoring każdego auta w czasie rzeczywistym w tym jego pozycję, zużycie paliwa i przebieg? Dodatkowo nasze narzędzie minimalizuje koszty utrzymania samochodów, skraca czas przejazdów, a także tworzenie planu tras czy dostaw. Z naszej wiedzy i doświadczenia korzysta już ponad 49 tys. Klientów. Monitorujemy 809 000 pojazdów na całym świecie, co jest naszą najlepszą wizytówką. Bardzo proszę o e-maila zwrotnego, jeśli moglibyśmy wspólnie omówić potencjał wykorzystania takiego rozwiązania w Państwa firmie. Z poważaniem, Mateusz Talaga

3 years, 4 months

1
0
0 0

[PATCH] kselftest/vm: Revert "tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner"

by Shuah Khan

With this change, userfaultfd fails to build with undefined reference swap() error: userfaultfd.c: In function ‘userfaultfd_stress’: userfaultfd.c:1530:17: warning: implicit declaration of function ‘swap’; did you mean ‘swab’? [-Wimplicit-function-declaration] 1530 | swap(area_src, area_dst); | ^~~~ | swab /usr/bin/ld: /tmp/ccDGOAdV.o: in function `userfaultfd_stress': userfaultfd.c:(.text+0x549e): undefined reference to `swap' /usr/bin/ld: userfaultfd.c:(.text+0x54bc): undefined reference to `swap' collect2: error: ld returned 1 exit status Revert the commit to fix the problem. Fixes: 2c769ed7137a ("tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner") Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> --- tools/testing/selftests/vm/userfaultfd.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index d3fd24f9fae8..2f49c9af1b58 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -1417,6 +1417,7 @@ static void userfaultfd_pagemap_test(unsigned int test_pgsize) static int userfaultfd_stress(void) { void *area; + char *tmp_area; unsigned long nr; struct uffdio_register uffdio_register; struct uffd_stats uffd_stats[nr_cpus]; @@ -1527,9 +1528,13 @@ static int userfaultfd_stress(void) count_verify[nr], nr); /* prepare next bounce */ - swap(area_src, area_dst); + tmp_area = area_src; + area_src = area_dst; + area_dst = tmp_area; - swap(area_src_alias, area_dst_alias); + tmp_area = area_src_alias; + area_src_alias = area_dst_alias; + area_dst_alias = tmp_area; uffd_stats_report(uffd_stats, nr_cpus); } -- 2.32.0

3 years, 4 months

1
0
0 0

[PATCH] kselftest: alsa: Declare most functions static

by Mark Brown

This program has only one file so most functions can be static. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- This depends on my previously posted patch adding coverage of events: https://lore.kernel.org/all/20220201151551.21497-1-broonie@kernel.org/ tools/testing/selftests/alsa/mixer-test.c | 58 ++++++++++++----------- 1 file changed, 30 insertions(+), 28 deletions(-) diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c index 42cf3b724586..8faae89b7b48 100644 --- a/tools/testing/selftests/alsa/mixer-test.c +++ b/tools/testing/selftests/alsa/mixer-test.c @@ -71,7 +71,8 @@ struct ctl_data *ctl_list = NULL; #endif #ifndef LIB_HAS_LOAD_STRING -int snd_config_load_string(snd_config_t **config, const char *s, size_t size) +static int snd_config_load_string(snd_config_t **config, const char *s, + size_t size) { snd_input_t *input; snd_config_t *dst; @@ -99,7 +100,7 @@ int snd_config_load_string(snd_config_t **config, const char *s, size_t size) } #endif -void find_controls(void) +static void find_controls(void) { char name[32]; int card, ctl, err; @@ -222,7 +223,7 @@ void find_controls(void) * Block for up to timeout ms for an event, returns a negative value * on error, 0 for no event and 1 for an event. */ -int wait_for_event(struct ctl_data *ctl, int timeout) +static int wait_for_event(struct ctl_data *ctl, int timeout) { unsigned short revents; snd_ctl_event_t *event; @@ -285,8 +286,9 @@ int wait_for_event(struct ctl_data *ctl, int timeout) return 1; } -bool ctl_value_index_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val, - int index) +static bool ctl_value_index_valid(struct ctl_data *ctl, + snd_ctl_elem_value_t *val, + int index) { long int_val; long long int64_val; @@ -397,7 +399,7 @@ bool ctl_value_index_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val, * Check that the provided value meets the constraints for the * provided control. */ -bool ctl_value_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val) +static bool ctl_value_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val) { int i; bool valid = true; @@ -413,7 +415,7 @@ bool ctl_value_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val) * Check that we can read the default value and it is valid. Write * tests use the read value to restore the default. */ -void test_ctl_get_value(struct ctl_data *ctl) +static void test_ctl_get_value(struct ctl_data *ctl) { int err; @@ -448,9 +450,9 @@ void test_ctl_get_value(struct ctl_data *ctl) ctl->card->card, ctl->elem); } -bool show_mismatch(struct ctl_data *ctl, int index, - snd_ctl_elem_value_t *read_val, - snd_ctl_elem_value_t *expected_val) +static bool show_mismatch(struct ctl_data *ctl, int index, + snd_ctl_elem_value_t *read_val, + snd_ctl_elem_value_t *expected_val) { long long expected_int, read_int; @@ -513,9 +515,9 @@ bool show_mismatch(struct ctl_data *ctl, int index, * the write to fail, for verifying that invalid writes don't corrupt * anything. */ -int write_and_verify(struct ctl_data *ctl, - snd_ctl_elem_value_t *write_val, - snd_ctl_elem_value_t *expected_val) +static int write_and_verify(struct ctl_data *ctl, + snd_ctl_elem_value_t *write_val, + snd_ctl_elem_value_t *expected_val) { int err, i; bool error_expected, mismatch_shown; @@ -622,7 +624,7 @@ int write_and_verify(struct ctl_data *ctl, * Make sure we can write the default value back to the control, this * should validate that at least some write works. */ -void test_ctl_write_default(struct ctl_data *ctl) +static void test_ctl_write_default(struct ctl_data *ctl) { int err; @@ -655,7 +657,7 @@ void test_ctl_write_default(struct ctl_data *ctl) ctl->card->card, ctl->elem); } -bool test_ctl_write_valid_boolean(struct ctl_data *ctl) +static bool test_ctl_write_valid_boolean(struct ctl_data *ctl) { int err, i, j; bool fail = false; @@ -676,7 +678,7 @@ bool test_ctl_write_valid_boolean(struct ctl_data *ctl) return !fail; } -bool test_ctl_write_valid_integer(struct ctl_data *ctl) +static bool test_ctl_write_valid_integer(struct ctl_data *ctl) { int err; int i; @@ -706,7 +708,7 @@ bool test_ctl_write_valid_integer(struct ctl_data *ctl) return !fail; } -bool test_ctl_write_valid_integer64(struct ctl_data *ctl) +static bool test_ctl_write_valid_integer64(struct ctl_data *ctl) { int err, i; long long j, step; @@ -734,7 +736,7 @@ bool test_ctl_write_valid_integer64(struct ctl_data *ctl) return !fail; } -bool test_ctl_write_valid_enumerated(struct ctl_data *ctl) +static bool test_ctl_write_valid_enumerated(struct ctl_data *ctl) { int err, i, j; bool fail = false; @@ -755,7 +757,7 @@ bool test_ctl_write_valid_enumerated(struct ctl_data *ctl) return !fail; } -void test_ctl_write_valid(struct ctl_data *ctl) +static void test_ctl_write_valid(struct ctl_data *ctl) { bool pass; int err; @@ -808,8 +810,8 @@ void test_ctl_write_valid(struct ctl_data *ctl) ctl->card->card, ctl->elem); } -bool test_ctl_write_invalid_value(struct ctl_data *ctl, - snd_ctl_elem_value_t *val) +static bool test_ctl_write_invalid_value(struct ctl_data *ctl, + snd_ctl_elem_value_t *val) { int err; long val_read; @@ -830,7 +832,7 @@ bool test_ctl_write_invalid_value(struct ctl_data *ctl, return !ctl_value_valid(ctl, val); } -bool test_ctl_write_invalid_boolean(struct ctl_data *ctl) +static bool test_ctl_write_invalid_boolean(struct ctl_data *ctl) { int err, i; long val_read; @@ -849,7 +851,7 @@ bool test_ctl_write_invalid_boolean(struct ctl_data *ctl) return !fail; } -bool test_ctl_write_invalid_integer(struct ctl_data *ctl) +static bool test_ctl_write_invalid_integer(struct ctl_data *ctl) { int i; bool fail = false; @@ -895,7 +897,7 @@ bool test_ctl_write_invalid_integer(struct ctl_data *ctl) return !fail; } -bool test_ctl_write_invalid_integer64(struct ctl_data *ctl) +static bool test_ctl_write_invalid_integer64(struct ctl_data *ctl) { int i; bool fail = false; @@ -941,7 +943,7 @@ bool test_ctl_write_invalid_integer64(struct ctl_data *ctl) return !fail; } -bool test_ctl_write_invalid_enumerated(struct ctl_data *ctl) +static bool test_ctl_write_invalid_enumerated(struct ctl_data *ctl) { int err, i; unsigned int val_read; @@ -973,7 +975,7 @@ bool test_ctl_write_invalid_enumerated(struct ctl_data *ctl) } -void test_ctl_write_invalid(struct ctl_data *ctl) +static void test_ctl_write_invalid(struct ctl_data *ctl) { bool pass; int err; @@ -1026,13 +1028,13 @@ void test_ctl_write_invalid(struct ctl_data *ctl) ctl->card->card, ctl->elem); } -void test_ctl_event_missing(struct ctl_data *ctl) +static void test_ctl_event_missing(struct ctl_data *ctl) { ksft_test_result(!ctl->event_missing, "event_missing.%d.%d\n", ctl->card->card, ctl->elem); } -void test_ctl_event_spurious(struct ctl_data *ctl) +static void test_ctl_event_spurious(struct ctl_data *ctl) { ksft_test_result(!ctl->event_spurious, "event_spurious.%d.%d\n", ctl->card->card, ctl->elem); -- 2.30.2

3 years, 4 months

2
1
0 0

[PATCH net-next 0/4] selftests: fib rule: Small internal and test output improvments

by Guillaume Nault

The first half of these patch set improves the code logic and has no user visible effect. The second half improves the script output, to make it clearer and nicer to read. Guillaume Nault (4): selftests: fib rule: Make 'getmatch' and 'match' local variables selftests: fib rule: Drop erroneous TABLE variable selftests: fib rule: Log test description selftests: fib rule: Don't echo modified sysctls tools/testing/selftests/net/fib_rule_tests.sh | 26 ++++++++++++------- 1 file changed, 17 insertions(+), 9 deletions(-) -- 2.21.3

3 years, 4 months

2
5
0 0

[PATCH] selftests: kselftest framework: Provide "finished" helper

by Kees Cook

Instead of having each time that wants to use ksft_exit() have to figure out the internals of kselftest.h, add the helper ksft_finished() that makes sure the passes, xfails, and skips are equal to the test plan count. Cc: Shuah Khan <shuah(a)kernel.org> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: linux-kselftest(a)vger.kernel.org Cc: linux-mm(a)kvack.org Signed-off-by: Kees Cook <keescook(a)chromium.org> --- tools/testing/selftests/kselftest.h | 10 ++++++++++ tools/testing/selftests/vm/memfd_secret.c | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest.h b/tools/testing/selftests/kselftest.h index f1180987492c..b8f248018174 100644 --- a/tools/testing/selftests/kselftest.h +++ b/tools/testing/selftests/kselftest.h @@ -28,6 +28,7 @@ * * When all tests are finished, clean up and exit the program with one of: * + * ksft_finished(); * ksft_exit(condition); * ksft_exit_pass(); * ksft_exit_fail(); @@ -235,6 +236,15 @@ static inline int ksft_exit_fail(void) ksft_exit_fail(); \ } while (0) +/** + * ksft_finished() - Exit selftest with success if all tests passed + */ +#define ksft_finished() \ + ksft_exit(ksft_plan == \ + ksft_cnt.ksft_pass + \ + ksft_cnt.ksft_xfail + \ + ksft_cnt.ksft_xskip) + static inline int ksft_exit_fail_msg(const char *msg, ...) { int saved_errno = errno; diff --git a/tools/testing/selftests/vm/memfd_secret.c b/tools/testing/selftests/vm/memfd_secret.c index 93e7e7ffed33..957b9e18c729 100644 --- a/tools/testing/selftests/vm/memfd_secret.c +++ b/tools/testing/selftests/vm/memfd_secret.c @@ -282,7 +282,7 @@ int main(int argc, char *argv[]) close(fd); - ksft_exit(!ksft_get_fail_cnt()); + ksft_finished(); } #else /* __NR_memfd_secret */ -- 2.30.2

3 years, 5 months

1
0
0 0

[PATCH] selftests/exec: Test for empty string on NULL argv

by Kees Cook

Test for the NULL argv argument producing a single empty string on exec. Cc: Eric Biederman <ebiederm(a)xmission.com> Cc: Shuah Khan <shuah(a)kernel.org> Cc: Yang Yingliang <yangyingliang(a)huawei.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Kees Cook <keescook(a)chromium.org> --- This is testing for this patch: https://lore.kernel.org/linux-hardening/20220201000947.2453721-1-keescook@c… --- tools/testing/selftests/exec/Makefile | 1 + tools/testing/selftests/exec/null-argv.c | 78 ++++++++++++++++++++++++ 2 files changed, 79 insertions(+) create mode 100644 tools/testing/selftests/exec/null-argv.c diff --git a/tools/testing/selftests/exec/Makefile b/tools/testing/selftests/exec/Makefile index dd61118df66e..4832cd8f4f9c 100644 --- a/tools/testing/selftests/exec/Makefile +++ b/tools/testing/selftests/exec/Makefile @@ -10,6 +10,7 @@ TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir pipe TEST_FILES := Makefile TEST_GEN_PROGS += recursion-depth +TEST_GEN_PROGS += null-argv EXTRA_CLEAN := $(OUTPUT)/subdir.moved $(OUTPUT)/execveat.moved $(OUTPUT)/xxxxx* \ $(OUTPUT)/S_I*.test diff --git a/tools/testing/selftests/exec/null-argv.c b/tools/testing/selftests/exec/null-argv.c new file mode 100644 index 000000000000..c19726e710d1 --- /dev/null +++ b/tools/testing/selftests/exec/null-argv.c @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Test that empty argvs are swapped out for a single empty string. */ +#include <stdio.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/wait.h> + +#include "../kselftest.h" + +#define FORK(exec) \ +do { \ + pid = fork(); \ + if (pid == 0) { \ + /* Child */ \ + exec; /* Some kind of exec */ \ + perror("# " #exec); \ + return 1; \ + } \ + check_result(pid, #exec); \ +} while (0) + +void check_result(pid_t pid, const char *msg) +{ + int wstatus; + + if (pid == (pid_t)-1) { + perror("# fork"); + ksft_test_result_fail("fork failed: %s\n", msg); + return; + } + if (waitpid(pid, &wstatus, 0) < 0) { + perror("# waitpid"); + ksft_test_result_fail("waitpid failed: %s\n", msg); + return; + } + if (!WIFEXITED(wstatus)) { + ksft_test_result_fail("child did not exit: %s\n", msg); + return; + } + if (WEXITSTATUS(wstatus) != 0) { + ksft_test_result_fail("non-zero exit: %s\n", msg); + return; + } + ksft_test_result_pass("%s\n", msg); +} + +int main(int argc, char *argv[], char *envp[]) +{ + pid_t pid; + static char * const args[] = { NULL }; + static char * const str[] = { "", NULL }; + + /* argc counting checks */ + if (argc < 1) { + fprintf(stderr, "# FAIL: saw argc == 0 (old kernel?)\n"); + return 1; + } + if (argc != 1) { + fprintf(stderr, "# FAIL: unknown argc (%d)\n", argc); + return 1; + } + if (argv[0][0] == '\0') { + /* Good, we found a NULL terminated string at argv[0]! */ + return 0; + } + + /* Test runner. */ + ksft_print_header(); + ksft_set_plan(5); + + FORK(execve(argv[0], str, NULL)); + FORK(execve(argv[0], NULL, NULL)); + FORK(execve(argv[0], NULL, envp)); + FORK(execve(argv[0], args, NULL)); + FORK(execve(argv[0], args, envp)); + + ksft_exit(ksft_cnt.ksft_pass == ksft_plan); +} -- 2.30.2

3 years, 5 months

1
0
0 0

[PATCH] userfaultfd/selftests: use swap() to make code cleaner

by cgel.zte＠gmail.com

From: Changcheng Deng <deng.changcheng(a)zte.com.cn> Use swap() in order to make code cleaner. Issue found by coccinelle. Reported-by: Zeal Robot <zealci(a)zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng(a)zte.com.cn> --- tools/testing/selftests/vm/userfaultfd.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index 8a09057d2f22..41dfe6f4ebfb 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -1413,7 +1413,6 @@ static void userfaultfd_pagemap_test(unsigned int test_pgsize) static int userfaultfd_stress(void) { void *area; - char *tmp_area; unsigned long nr; struct uffdio_register uffdio_register; struct uffd_stats uffd_stats[nr_cpus]; @@ -1524,13 +1523,8 @@ static int userfaultfd_stress(void) count_verify[nr], nr); /* prepare next bounce */ - tmp_area = area_src; - area_src = area_dst; - area_dst = tmp_area; - - tmp_area = area_src_alias; - area_src_alias = area_dst_alias; - area_dst_alias = tmp_area; + swap(area_src, area_dst); + swap(area_src_alias, area_dst_alias); uffd_stats_report(uffd_stats, nr_cpus); } -- 2.25.1

3 years, 5 months

3
3
0 0

[PATCH] docs/kselftest: clarify running mainline tests on stables

by Shuah Khan

Update the document to clarifiy support for running mainline kselftest on stable releases and the reasons for not removing test code that can test older kernels. Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> --- Documentation/dev-tools/kselftest.rst | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index dcefee707ccd..a833ecf12fbc 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -7,6 +7,14 @@ directory. These are intended to be small tests to exercise individual code paths in the kernel. Tests are intended to be run after building, installing and booting a kernel. +Kselftest from mainline can be run on older stable kernels. Running tests +from mainline offers the best coverage. Several test rings run mainline +kselftest suite on stable releases. The reason is that when a new test +gets added to test existing code to regression test a bug, we should be +able to run that test on an older kernel. Hence, it is important to keep +code that can still test an older kernel and make sure it skips the test +gracefully on newer releases. + You can find additional information on Kselftest framework, how to write new tests using the framework on Kselftest wiki: -- 2.32.0

3 years, 5 months

2
4
0 0

[PATCH] kunit: fix missing f in f-string in run_checks.py

by Daniel Latypov

We're missing the `f` prefix to have python do string interpolation, so we'd never end up printing what the actual "unexpected" error is. Fixes: ee92ed38364e ("kunit: add run_checks.py script to validate kunit changes") Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- tools/testing/kunit/run_checks.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/kunit/run_checks.py b/tools/testing/kunit/run_checks.py index 4f32133ed77c..13d854afca9d 100755 --- a/tools/testing/kunit/run_checks.py +++ b/tools/testing/kunit/run_checks.py @@ -61,7 +61,7 @@ def main(argv: Sequence[str]) -> None: elif isinstance(ex, subprocess.CalledProcessError): print(f'{name}: FAILED') else: - print('{name}: unexpected exception: {ex}') + print(f'{name}: unexpected exception: {ex}') continue output = ex.output base-commit: 6125a5c70acddd9fc1fb7329047a254c74d0173c -- 2.35.0.rc2.247.g8bbb082509-goog

3 years, 5 months

3
2
0 0

[PATCH v4] kselftest: Fix vdso_test_abi return status

by Vincenzo Frascino

vdso_test_abi contains a batch of tests that verify the validity of the vDSO ABI. When a vDSO symbol is not found the relevant test is skipped reporting KSFT_SKIP. All the tests return values are then added in a single variable which is checked to verify failures. This approach can have side effects which result in reporting the wrong kselftest exit status. Fix vdso_test_abi verifying the return code of each test separately. Cc: Shuah Khan <shuah(a)kernel.org> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Reported-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino(a)arm.com> --- tools/testing/selftests/vDSO/vdso_test_abi.c | 135 +++++++++---------- 1 file changed, 62 insertions(+), 73 deletions(-) diff --git a/tools/testing/selftests/vDSO/vdso_test_abi.c b/tools/testing/selftests/vDSO/vdso_test_abi.c index 3d603f1394af..883ca85424bc 100644 --- a/tools/testing/selftests/vDSO/vdso_test_abi.c +++ b/tools/testing/selftests/vDSO/vdso_test_abi.c @@ -33,110 +33,114 @@ typedef long (*vdso_clock_gettime_t)(clockid_t clk_id, struct timespec *ts); typedef long (*vdso_clock_getres_t)(clockid_t clk_id, struct timespec *ts); typedef time_t (*vdso_time_t)(time_t *t); -static int vdso_test_gettimeofday(void) +#define VDSO_TEST_PASS_MSG() "\n%s(): PASS\n", __func__ +#define VDSO_TEST_FAIL_MSG(x) "\n%s(): %s FAIL\n", __func__, x +#define VDSO_TEST_SKIP_MSG(x) "\n%s(): SKIP: Could not find %s\n", __func__, x + +static void vdso_test_gettimeofday(void) { /* Find gettimeofday. */ vdso_gettimeofday_t vdso_gettimeofday = (vdso_gettimeofday_t)vdso_sym(version, name[0]); if (!vdso_gettimeofday) { - printf("Could not find %s\n", name[0]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[0])); + return; } struct timeval tv; long ret = vdso_gettimeofday(&tv, 0); if (ret == 0) { - printf("The time is %lld.%06lld\n", - (long long)tv.tv_sec, (long long)tv.tv_usec); + ksft_print_msg("The time is %lld.%06lld\n", + (long long)tv.tv_sec, (long long)tv.tv_usec); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[0]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[0])); } - - return KSFT_PASS; } -static int vdso_test_clock_gettime(clockid_t clk_id) +static void vdso_test_clock_gettime(clockid_t clk_id) { /* Find clock_gettime. */ vdso_clock_gettime_t vdso_clock_gettime = (vdso_clock_gettime_t)vdso_sym(version, name[1]); if (!vdso_clock_gettime) { - printf("Could not find %s\n", name[1]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[1])); + return; } struct timespec ts; long ret = vdso_clock_gettime(clk_id, &ts); if (ret == 0) { - printf("The time is %lld.%06lld\n", - (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_print_msg("The time is %lld.%06lld\n", + (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[1]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[1])); } - - return KSFT_PASS; } -static int vdso_test_time(void) +static void vdso_test_time(void) { /* Find time. */ vdso_time_t vdso_time = (vdso_time_t)vdso_sym(version, name[2]); if (!vdso_time) { - printf("Could not find %s\n", name[2]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[2])); + return; } long ret = vdso_time(NULL); if (ret > 0) { - printf("The time in hours since January 1, 1970 is %lld\n", + ksft_print_msg("The time in hours since January 1, 1970 is %lld\n", (long long)(ret / 3600)); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[2]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[2])); } - - return KSFT_PASS; } -static int vdso_test_clock_getres(clockid_t clk_id) +static void vdso_test_clock_getres(clockid_t clk_id) { + int clock_getres_fail = 0; + /* Find clock_getres. */ vdso_clock_getres_t vdso_clock_getres = (vdso_clock_getres_t)vdso_sym(version, name[3]); if (!vdso_clock_getres) { - printf("Could not find %s\n", name[3]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[3])); + return; } struct timespec ts, sys_ts; long ret = vdso_clock_getres(clk_id, &ts); if (ret == 0) { - printf("The resolution is %lld %lld\n", - (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_print_msg("The vdso resolution is %lld %lld\n", + (long long)ts.tv_sec, (long long)ts.tv_nsec); } else { - printf("%s failed\n", name[3]); - return KSFT_FAIL; + clock_getres_fail++; } ret = syscall(SYS_clock_getres, clk_id, &sys_ts); - if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) { - printf("%s failed\n", name[3]); - return KSFT_FAIL; - } + ksft_print_msg("The syscall resolution is %lld %lld\n", + (long long)sys_ts.tv_sec, (long long)sys_ts.tv_nsec); - return KSFT_PASS; + if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) + clock_getres_fail++; + + if (clock_getres_fail > 0) { + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[3])); + } else { + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); + } } const char *vdso_clock_name[12] = { @@ -158,36 +162,23 @@ const char *vdso_clock_name[12] = { * This function calls vdso_test_clock_gettime and vdso_test_clock_getres * with different values for clock_id. */ -static inline int vdso_test_clock(clockid_t clock_id) +static inline void vdso_test_clock(clockid_t clock_id) { - int ret0, ret1; - - ret0 = vdso_test_clock_gettime(clock_id); - /* A skipped test is considered passed */ - if (ret0 == KSFT_SKIP) - ret0 = KSFT_PASS; - - ret1 = vdso_test_clock_getres(clock_id); - /* A skipped test is considered passed */ - if (ret1 == KSFT_SKIP) - ret1 = KSFT_PASS; + ksft_print_msg("\nclock_id: %s\n", vdso_clock_name[clock_id]); - ret0 += ret1; + vdso_test_clock_gettime(clock_id); - printf("clock_id: %s", vdso_clock_name[clock_id]); - - if (ret0 > 0) - printf(" [FAIL]\n"); - else - printf(" [PASS]\n"); - - return ret0; + vdso_test_clock_getres(clock_id); } +#define VDSO_TEST_PLAN 16 + int main(int argc, char **argv) { unsigned long sysinfo_ehdr = getauxval(AT_SYSINFO_EHDR); - int ret; + + ksft_print_header(); + ksft_set_plan(VDSO_TEST_PLAN); if (!sysinfo_ehdr) { printf("AT_SYSINFO_EHDR is not present!\n"); @@ -201,44 +192,42 @@ int main(int argc, char **argv) vdso_init_from_sysinfo_ehdr(getauxval(AT_SYSINFO_EHDR)); - ret = vdso_test_gettimeofday(); + vdso_test_gettimeofday(); #if _POSIX_TIMERS > 0 #ifdef CLOCK_REALTIME - ret += vdso_test_clock(CLOCK_REALTIME); + vdso_test_clock(CLOCK_REALTIME); #endif #ifdef CLOCK_BOOTTIME - ret += vdso_test_clock(CLOCK_BOOTTIME); + vdso_test_clock(CLOCK_BOOTTIME); #endif #ifdef CLOCK_TAI - ret += vdso_test_clock(CLOCK_TAI); + vdso_test_clock(CLOCK_TAI); #endif #ifdef CLOCK_REALTIME_COARSE - ret += vdso_test_clock(CLOCK_REALTIME_COARSE); + vdso_test_clock(CLOCK_REALTIME_COARSE); #endif #ifdef CLOCK_MONOTONIC - ret += vdso_test_clock(CLOCK_MONOTONIC); + vdso_test_clock(CLOCK_MONOTONIC); #endif #ifdef CLOCK_MONOTONIC_RAW - ret += vdso_test_clock(CLOCK_MONOTONIC_RAW); + vdso_test_clock(CLOCK_MONOTONIC_RAW); #endif #ifdef CLOCK_MONOTONIC_COARSE - ret += vdso_test_clock(CLOCK_MONOTONIC_COARSE); + vdso_test_clock(CLOCK_MONOTONIC_COARSE); #endif #endif - ret += vdso_test_time(); - - if (ret > 0) - return KSFT_FAIL; + vdso_test_time(); - return KSFT_PASS; + ksft_print_cnts(); + return ksft_get_fail_cnt() == 0 ? KSFT_PASS : KSFT_FAIL; } -- 2.34.1

3 years, 5 months

2
1
0 0

[PATCH bpf-next v2 0/6] tools/bpf: Enable cross-building with clang

by Jean-Philippe Brucker

Since v1 [1], I added Quentin's acks and applied Andrii's suggestions: * Pass CFLAGS to libbpf link in patch 3 * Substitute CLANG_CROSS_FLAGS whole in HOST_CFLAGS to avoid accidents, patch 4 Add support for cross-building BPF tools and selftests with clang, by passing LLVM=1 or CC=clang to make, as well as CROSS_COMPILE. A single clang toolchain can generate binaries for multiple architectures, so instead of having prefixes such as aarch64-linux-gnu-gcc, clang uses the -target parameter: `clang -target aarch64-linux-gnu'. Patch 1 adds the parameter in Makefile.include so tools can easily support this. Patch 2 prepares for the libbpf change from patch 3 (keep building resolve_btfids's libbpf in the host arch, when cross-building the kernel with clang). Patches 3-6 enable cross-building BPF tools with clang. [1] https://lore.kernel.org/bpf/20211122192019.1277299-1-jean-philippe@linaro.o… Jean-Philippe Brucker (6): tools: Help cross-building with clang tools/resolve_btfids: Support cross-building the kernel with clang tools/libbpf: Enable cross-building with clang bpftool: Enable cross-building with clang tools/runqslower: Enable cross-building with clang selftests/bpf: Enable cross-building with clang tools/bpf/bpftool/Makefile | 13 +++++++------ tools/bpf/resolve_btfids/Makefile | 1 + tools/bpf/runqslower/Makefile | 4 ++-- tools/lib/bpf/Makefile | 3 ++- tools/scripts/Makefile.include | 13 ++++++++++++- tools/testing/selftests/bpf/Makefile | 8 ++++---- 6 files changed, 28 insertions(+), 14 deletions(-) -- 2.34.1

3 years, 5 months

4
11
0 0

[PATCH net-next 5/5] selftests: net: bridge: Parameterize ageing timeout

by Tobias Waldekranz

Allow the ageing timeout that is set on bridges to be customized from forwarding.config. This allows the tests to be run on hardware which does not support a 10s timeout (e.g. mv88e6xxx). Signed-off-by: Tobias Waldekranz <tobias(a)waldekranz.com> --- tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh | 5 +++-- .../testing/selftests/net/forwarding/bridge_vlan_unaware.sh | 5 +++-- .../selftests/net/forwarding/forwarding.config.sample | 2 ++ tools/testing/selftests/net/forwarding/lib.sh | 1 + 4 files changed, 9 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh index b90dff8d3a94..64bd00fe9a4f 100755 --- a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh @@ -28,8 +28,9 @@ h2_destroy() switch_create() { - # 10 Seconds ageing time. - ip link add dev br0 type bridge vlan_filtering 1 ageing_time 1000 \ + ip link add dev br0 type bridge \ + vlan_filtering 1 \ + ageing_time $LOW_AGEING_TIME \ mcast_snooping 0 ip link set dev $swp1 master br0 diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh index c15c6c85c984..1c8a26046589 100755 --- a/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh @@ -27,8 +27,9 @@ h2_destroy() switch_create() { - # 10 Seconds ageing time. - ip link add dev br0 type bridge ageing_time 1000 mcast_snooping 0 + ip link add dev br0 type bridge \ + ageing_time $LOW_AGEING_TIME \ + mcast_snooping 0 ip link set dev $swp1 master br0 ip link set dev $swp2 master br0 diff --git a/tools/testing/selftests/net/forwarding/forwarding.config.sample b/tools/testing/selftests/net/forwarding/forwarding.config.sample index b0980a2efa31..4a546509de90 100644 --- a/tools/testing/selftests/net/forwarding/forwarding.config.sample +++ b/tools/testing/selftests/net/forwarding/forwarding.config.sample @@ -41,6 +41,8 @@ NETIF_CREATE=yes # Timeout (in seconds) before ping exits regardless of how many packets have # been sent or received PING_TIMEOUT=5 +# Minimum ageing_time (in centiseconds) supported by hardware +LOW_AGEING_TIME=1000 # Flag for tc match, supposed to be skip_sw/skip_hw which means do not process # filter by software/hardware TC_FLAG=skip_hw diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 7da783d6f453..e7e434a4758b 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -24,6 +24,7 @@ PING_COUNT=${PING_COUNT:=10} PING_TIMEOUT=${PING_TIMEOUT:=5} WAIT_TIMEOUT=${WAIT_TIMEOUT:=20} INTERFACE_TIMEOUT=${INTERFACE_TIMEOUT:=600} +LOW_AGEING_TIME=${LOW_AGEING_TIME:=1000} REQUIRE_JQ=${REQUIRE_JQ:=yes} REQUIRE_MZ=${REQUIRE_MZ:=yes} -- 2.25.1

3 years, 5 months

2
1
0 0

[PATCH v3] kselftest: Fix vdso_test_abi return status

by Vincenzo Frascino

vdso_test_abi contains a batch of tests that verify the validity of the vDSO ABI. When a vDSO symbol is not found the relevant test is skipped reporting KSFT_SKIP. All the tests return values are then added in a single variable which is checked to verify failures. This approach can have side effects which result in reporting the wrong kselftest exit status. Fix vdso_test_abi verifying the return code of each test separately. Cc: Shuah Khan <shuah(a)kernel.org> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Reported-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino(a)arm.com> --- tools/testing/selftests/vDSO/vdso_test_abi.c | 135 +++++++++---------- 1 file changed, 62 insertions(+), 73 deletions(-) diff --git a/tools/testing/selftests/vDSO/vdso_test_abi.c b/tools/testing/selftests/vDSO/vdso_test_abi.c index 3d603f1394af..d670d5b2a626 100644 --- a/tools/testing/selftests/vDSO/vdso_test_abi.c +++ b/tools/testing/selftests/vDSO/vdso_test_abi.c @@ -33,110 +33,114 @@ typedef long (*vdso_clock_gettime_t)(clockid_t clk_id, struct timespec *ts); typedef long (*vdso_clock_getres_t)(clockid_t clk_id, struct timespec *ts); typedef time_t (*vdso_time_t)(time_t *t); -static int vdso_test_gettimeofday(void) +#define VDSO_TEST_PASS_MSG() "\n%s(): PASS\n", __func__ +#define VDSO_TEST_FAIL_MSG(x) "\n%s(): %s FAIL\n", __func__, x +#define VDSO_TEST_SKIP_MSG(x) "\n%s(): SKIP: Could not find %s\n", __func__, x + +static void vdso_test_gettimeofday(void) { /* Find gettimeofday. */ vdso_gettimeofday_t vdso_gettimeofday = (vdso_gettimeofday_t)vdso_sym(version, name[0]); if (!vdso_gettimeofday) { - printf("Could not find %s\n", name[0]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[0])); + return; } struct timeval tv; long ret = vdso_gettimeofday(&tv, 0); if (ret == 0) { - printf("The time is %lld.%06lld\n", - (long long)tv.tv_sec, (long long)tv.tv_usec); + ksft_print_msg("The time is %lld.%06lld\n", + (long long)tv.tv_sec, (long long)tv.tv_usec); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[0]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[0])); } - - return KSFT_PASS; } -static int vdso_test_clock_gettime(clockid_t clk_id) +static void vdso_test_clock_gettime(clockid_t clk_id) { /* Find clock_gettime. */ vdso_clock_gettime_t vdso_clock_gettime = (vdso_clock_gettime_t)vdso_sym(version, name[1]); if (!vdso_clock_gettime) { - printf("Could not find %s\n", name[1]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[1])); + return; } struct timespec ts; long ret = vdso_clock_gettime(clk_id, &ts); if (ret == 0) { - printf("The time is %lld.%06lld\n", - (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_print_msg("The time is %lld.%06lld\n", + (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_test_result_pass(VDSO_TEST_PASS_MSG());; } else { - printf("%s failed\n", name[1]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[1])); } - - return KSFT_PASS; } -static int vdso_test_time(void) +static void vdso_test_time(void) { /* Find time. */ vdso_time_t vdso_time = (vdso_time_t)vdso_sym(version, name[2]); if (!vdso_time) { - printf("Could not find %s\n", name[2]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[2])); + return; } long ret = vdso_time(NULL); if (ret > 0) { - printf("The time in hours since January 1, 1970 is %lld\n", + ksft_print_msg("The time in hours since January 1, 1970 is %lld\n", (long long)(ret / 3600)); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[2]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[2])); } - - return KSFT_PASS; } -static int vdso_test_clock_getres(clockid_t clk_id) +static void vdso_test_clock_getres(clockid_t clk_id) { + int clock_getres_fail = 0; + /* Find clock_getres. */ vdso_clock_getres_t vdso_clock_getres = (vdso_clock_getres_t)vdso_sym(version, name[3]); if (!vdso_clock_getres) { - printf("Could not find %s\n", name[3]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[3])); + return; } struct timespec ts, sys_ts; long ret = vdso_clock_getres(clk_id, &ts); if (ret == 0) { - printf("The resolution is %lld %lld\n", - (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_print_msg("The vdso resolution is %lld %lld\n", + (long long)ts.tv_sec, (long long)ts.tv_nsec); } else { - printf("%s failed\n", name[3]); - return KSFT_FAIL; + clock_getres_fail++; } ret = syscall(SYS_clock_getres, clk_id, &sys_ts); - if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) { - printf("%s failed\n", name[3]); - return KSFT_FAIL; - } + ksft_print_msg("The syscall resolution is %lld %lld\n", + (long long)sys_ts.tv_sec, (long long)sys_ts.tv_nsec); - return KSFT_PASS; + if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) + clock_getres_fail++; + + if (clock_getres_fail > 0) { + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[3])); + } else { + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); + } } const char *vdso_clock_name[12] = { @@ -158,36 +162,23 @@ const char *vdso_clock_name[12] = { * This function calls vdso_test_clock_gettime and vdso_test_clock_getres * with different values for clock_id. */ -static inline int vdso_test_clock(clockid_t clock_id) +static inline void vdso_test_clock(clockid_t clock_id) { - int ret0, ret1; - - ret0 = vdso_test_clock_gettime(clock_id); - /* A skipped test is considered passed */ - if (ret0 == KSFT_SKIP) - ret0 = KSFT_PASS; - - ret1 = vdso_test_clock_getres(clock_id); - /* A skipped test is considered passed */ - if (ret1 == KSFT_SKIP) - ret1 = KSFT_PASS; + ksft_print_msg("\nclock_id: %s\n", vdso_clock_name[clock_id]); - ret0 += ret1; + vdso_test_clock_gettime(clock_id); - printf("clock_id: %s", vdso_clock_name[clock_id]); - - if (ret0 > 0) - printf(" [FAIL]\n"); - else - printf(" [PASS]\n"); - - return ret0; + vdso_test_clock_getres(clock_id); } +#define VDSO_TEST_PLAN 16 + int main(int argc, char **argv) { unsigned long sysinfo_ehdr = getauxval(AT_SYSINFO_EHDR); - int ret; + + ksft_print_header(); + ksft_set_plan(VDSO_TEST_PLAN); if (!sysinfo_ehdr) { printf("AT_SYSINFO_EHDR is not present!\n"); @@ -201,44 +192,42 @@ int main(int argc, char **argv) vdso_init_from_sysinfo_ehdr(getauxval(AT_SYSINFO_EHDR)); - ret = vdso_test_gettimeofday(); + vdso_test_gettimeofday(); #if _POSIX_TIMERS > 0 #ifdef CLOCK_REALTIME - ret += vdso_test_clock(CLOCK_REALTIME); + vdso_test_clock(CLOCK_REALTIME); #endif #ifdef CLOCK_BOOTTIME - ret += vdso_test_clock(CLOCK_BOOTTIME); + vdso_test_clock(CLOCK_BOOTTIME); #endif #ifdef CLOCK_TAI - ret += vdso_test_clock(CLOCK_TAI); + vdso_test_clock(CLOCK_TAI); #endif #ifdef CLOCK_REALTIME_COARSE - ret += vdso_test_clock(CLOCK_REALTIME_COARSE); + vdso_test_clock(CLOCK_REALTIME_COARSE); #endif #ifdef CLOCK_MONOTONIC - ret += vdso_test_clock(CLOCK_MONOTONIC); + vdso_test_clock(CLOCK_MONOTONIC); #endif #ifdef CLOCK_MONOTONIC_RAW - ret += vdso_test_clock(CLOCK_MONOTONIC_RAW); + vdso_test_clock(CLOCK_MONOTONIC_RAW); #endif #ifdef CLOCK_MONOTONIC_COARSE - ret += vdso_test_clock(CLOCK_MONOTONIC_COARSE); + vdso_test_clock(CLOCK_MONOTONIC_COARSE); #endif #endif - ret += vdso_test_time(); - - if (ret > 0) - return KSFT_FAIL; + vdso_test_time(); - return KSFT_PASS; + ksft_print_cnts(); + return ksft_get_fail_cnt() == 0 ? KSFT_PASS : KSFT_FAIL; } -- 2.34.1

3 years, 5 months

3
4
0 0

Hello....

by Mrs.Bill.Chantal

You have been compensated with the sum of 9.5 million dollars in this united nation the payment will be issue into atm visa card and send to you from the santander bank we need your address and your Whatsapp number + 1 6465853907 this my email.ID ( mrs.bill.chantal.roland(a)gmail.com ) contact me Thanks my mrs bill chantal

3 years, 5 months

1
0
0 0

[PATCH] kunit: cleanup assertion macro internal variables

by Daniel Latypov

All the operands should be tagged `const`. We're only assigning them to variables so that we can compare them (e.g. check if left == right, etc.) and avoid evaluating expressions multiple times. There's no need for them to be mutable. Also rename the helper variable `loc` to `__loc` like we do with `__assertion` and `__strs` to avoid potential name collisions with user code. Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- Note: this patch is based on top of https://lore.kernel.org/all/20220125210011.3817742-4-dlatypov@google.com/ There is no semantic dependency between the patches, but they touch adjacent lines. --- include/kunit/test.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index 088ff394ae94..00b9ff7783ab 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -779,10 +779,10 @@ void kunit_do_failed_assertion(struct kunit *test, #define KUNIT_ASSERTION(test, assert_type, pass, assert_class, INITIALIZER, fmt, ...) do { \ if (unlikely(!(pass))) { \ - static const struct kunit_loc loc = KUNIT_CURRENT_LOC; \ + static const struct kunit_loc __loc = KUNIT_CURRENT_LOC; \ struct assert_class __assertion = INITIALIZER; \ kunit_do_failed_assertion(test, \ - &loc, \ + &__loc, \ assert_type, \ &__assertion.assert, \ fmt, \ @@ -872,8 +872,8 @@ void kunit_do_failed_assertion(struct kunit *test, fmt, \ ...) \ do { \ - typeof(left) __left = (left); \ - typeof(right) __right = (right); \ + const typeof(left) __left = (left); \ + const typeof(right) __right = (right); \ static const struct kunit_binary_assert_text __text = { \ .operation = #op, \ .left_text = #left, \ @@ -956,7 +956,7 @@ do { \ fmt, \ ...) \ do { \ - typeof(ptr) __ptr = (ptr); \ + const typeof(ptr) __ptr = (ptr); \ \ KUNIT_ASSERTION(test, \ assert_type, \ -- 2.35.0.rc2.247.g8bbb082509-goog

3 years, 5 months

3
3
0 0

[RFC PATCH] kunit: flatten kunit_suite*** to kunit_suite** in executor

by Daniel Latypov

Per [1], we might not need the array-of-array of kunit_suite's. This RFC patch previews the changes we'd make to the executor to accommodate that by making the executor automatically flatten the kunit_suite*** into a kunit_suite**. The test filtering support [2] added the largest dependency on the current kunit_suite*** layout, so this patch is based on that. It actually drastically simplifies the code, so it might be useful to keep the auto-flattening step until we actually make the change. [1] https://lore.kernel.org/linux-kselftest/101d12fc9250b7a445ff50a9e7a25cd74d0… [2] https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/c… Cc: Jeremy Kerr <jk(a)codeconstruct.com.au> Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- lib/kunit/executor.c | 132 +++++++++++++++----------------------- lib/kunit/executor_test.c | 131 ++++++++++--------------------------- 2 files changed, 85 insertions(+), 178 deletions(-) diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c index 22640c9ee819..3a7246336625 100644 --- a/lib/kunit/executor.c +++ b/lib/kunit/executor.c @@ -88,60 +88,18 @@ kunit_filter_tests(struct kunit_suite *const suite, const char *test_glob) static char *kunit_shutdown; core_param(kunit_shutdown, kunit_shutdown, charp, 0644); -static struct kunit_suite * const * -kunit_filter_subsuite(struct kunit_suite * const * const subsuite, - struct kunit_test_filter *filter) -{ - int i, n = 0; - struct kunit_suite **filtered, *filtered_suite; - - n = 0; - for (i = 0; subsuite[i]; ++i) { - if (glob_match(filter->suite_glob, subsuite[i]->name)) - ++n; - } - - if (n == 0) - return NULL; - - filtered = kmalloc_array(n + 1, sizeof(*filtered), GFP_KERNEL); - if (!filtered) - return NULL; - - n = 0; - for (i = 0; subsuite[i] != NULL; ++i) { - if (!glob_match(filter->suite_glob, subsuite[i]->name)) - continue; - filtered_suite = kunit_filter_tests(subsuite[i], filter->test_glob); - if (filtered_suite) - filtered[n++] = filtered_suite; - } - filtered[n] = NULL; - - return filtered; -} - +/* Stores a NULL-terminated array of suites. */ struct suite_set { - struct kunit_suite * const * const *start; - struct kunit_suite * const * const *end; + struct kunit_suite * const *start; + struct kunit_suite * const *end; }; -static void kunit_free_subsuite(struct kunit_suite * const *subsuite) -{ - unsigned int i; - - for (i = 0; subsuite[i]; i++) - kfree(subsuite[i]); - - kfree(subsuite); -} - static void kunit_free_suite_set(struct suite_set suite_set) { - struct kunit_suite * const * const *suites; + struct kunit_suite * const *suites; for (suites = suite_set.start; suites < suite_set.end; suites++) - kunit_free_subsuite(*suites); + kfree(*suites); kfree(suite_set.start); } @@ -149,10 +107,11 @@ static struct suite_set kunit_filter_suites(const struct suite_set *suite_set, const char *filter_glob) { int i; - struct kunit_suite * const **copy, * const *filtered_subsuite; + struct kunit_suite **copy, *filtered_suite; struct suite_set filtered; struct kunit_test_filter filter; + /* Note: this includes space for the terminating NULL. */ const size_t max = suite_set->end - suite_set->start; copy = kmalloc_array(max, sizeof(*filtered.start), GFP_KERNEL); @@ -164,11 +123,17 @@ static struct suite_set kunit_filter_suites(const struct suite_set *suite_set, kunit_parse_filter_glob(&filter, filter_glob); - for (i = 0; i < max; ++i) { - filtered_subsuite = kunit_filter_subsuite(suite_set->start[i], &filter); - if (filtered_subsuite) - *copy++ = filtered_subsuite; + for (i = 0; suite_set->start[i] != NULL; i++) { + if (!glob_match(filter.suite_glob, suite_set->start[i]->name)) + continue; + + filtered_suite = kunit_filter_tests(suite_set->start[i], filter.test_glob); + if (!filtered_suite) + continue; + + *copy++ = filtered_suite; } + *copy = NULL; filtered.end = copy; kfree(filter.suite_glob); @@ -190,52 +155,56 @@ static void kunit_handle_shutdown(void) } -static void kunit_print_tap_header(struct suite_set *suite_set) -{ - struct kunit_suite * const * const *suites, * const *subsuite; - int num_of_suites = 0; - - for (suites = suite_set->start; suites < suite_set->end; suites++) - for (subsuite = *suites; *subsuite != NULL; subsuite++) - num_of_suites++; - - pr_info("TAP version 14\n"); - pr_info("1..%d\n", num_of_suites); -} - static void kunit_exec_run_tests(struct suite_set *suite_set) { - struct kunit_suite * const * const *suites; - - kunit_print_tap_header(suite_set); + pr_info("TAP version 14\n"); + pr_info("1..%zu\n", suite_set->end - suite_set->start); - for (suites = suite_set->start; suites < suite_set->end; suites++) - __kunit_test_suites_init(*suites); + __kunit_test_suites_init(suite_set->start); } static void kunit_exec_list_tests(struct suite_set *suite_set) { - unsigned int i; - struct kunit_suite * const * const *suites; + struct kunit_suite * const *suites; struct kunit_case *test_case; /* Hack: print a tap header so kunit.py can find the start of KUnit output. */ pr_info("TAP version 14\n"); for (suites = suite_set->start; suites < suite_set->end; suites++) - for (i = 0; (*suites)[i] != NULL; i++) { - kunit_suite_for_each_test_case((*suites)[i], test_case) { - pr_info("%s.%s\n", (*suites)[i]->name, test_case->name); - } + kunit_suite_for_each_test_case((*suites), test_case) { + pr_info("%s.%s\n", (*suites)->name, test_case->name); } } +// TODO(dlatypov(a)google.com): delete this when we store suites in a single array. +static struct suite_set make_suite_set(void) +{ + struct suite_set flattened; + size_t num_of_suites = 0; + + struct kunit_suite * const * const *suites, * const *subsuite; + struct kunit_suite **end; + + for (suites = __kunit_suites_start; suites < __kunit_suites_end; suites++) + for (subsuite = *suites; *subsuite != NULL; subsuite++) + num_of_suites++; + + end = kcalloc(num_of_suites + 1, sizeof(*flattened.start), GFP_KERNEL); + flattened.start = end; + + for (suites = __kunit_suites_start; suites < __kunit_suites_end; suites++) + for (subsuite = *suites; *subsuite != NULL; subsuite++) + *end++ = *subsuite; + *end = NULL; + flattened.end = end; + return flattened; +} + int kunit_run_all_tests(void) { - struct suite_set suite_set = { - .start = __kunit_suites_start, - .end = __kunit_suites_end, - }; + struct suite_set suite_set = make_suite_set(); + struct kunit_suite * const *unfiltered = suite_set.start; /* need to free at end */ if (filter_glob_param) suite_set = kunit_filter_suites(&suite_set, filter_glob_param); @@ -247,9 +216,10 @@ int kunit_run_all_tests(void) else pr_err("kunit executor: unknown action '%s'\n", action_param); - if (filter_glob_param) { /* a copy was made of each array */ + if (filter_glob_param) { /* a copy was made of each suite */ kunit_free_suite_set(suite_set); } + kfree(unfiltered); kunit_handle_shutdown(); diff --git a/lib/kunit/executor_test.c b/lib/kunit/executor_test.c index 7d2b8dc668b1..d9fce637eb56 100644 --- a/lib/kunit/executor_test.c +++ b/lib/kunit/executor_test.c @@ -9,8 +9,6 @@ #include <kunit/test.h> static void kfree_at_end(struct kunit *test, const void *to_free); -static void free_subsuite_at_end(struct kunit *test, - struct kunit_suite *const *to_free); static struct kunit_suite *alloc_fake_suite(struct kunit *test, const char *suite_name, struct kunit_case *test_cases); @@ -41,124 +39,77 @@ static void parse_filter_test(struct kunit *test) kfree(filter.test_glob); } -static void filter_subsuite_test(struct kunit *test) +static void filter_suites_test(struct kunit *test) { struct kunit_suite *subsuite[3] = {NULL, NULL, NULL}; - struct kunit_suite * const *filtered; - struct kunit_test_filter filter = { - .suite_glob = "suite2", - .test_glob = NULL, - }; + struct suite_set suite_set = {.start = subsuite, .end = &subsuite[2]}; + struct suite_set got; subsuite[0] = alloc_fake_suite(test, "suite1", dummy_test_cases); subsuite[1] = alloc_fake_suite(test, "suite2", dummy_test_cases); /* Want: suite1, suite2, NULL -> suite2, NULL */ - filtered = kunit_filter_subsuite(subsuite, &filter); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, filtered); - free_subsuite_at_end(test, filtered); + got = kunit_filter_suites(&suite_set, "suite2"); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, got.start); + kfree_at_end(test, got.start); /* Validate we just have suite2 */ - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, filtered[0]); - KUNIT_EXPECT_STREQ(test, (const char *)filtered[0]->name, "suite2"); - KUNIT_EXPECT_FALSE(test, filtered[1]); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, got.start[0]); + KUNIT_EXPECT_STREQ(test, (const char *)got.start[0]->name, "suite2"); + // DO NOT SUBMIT: null-terminated for now. + KUNIT_ASSERT_EQ(test, got.end - got.start, 1); + KUNIT_EXPECT_FALSE(test, *got.end); } -static void filter_subsuite_test_glob_test(struct kunit *test) +static void filter_suites_test_glob_test(struct kunit *test) { struct kunit_suite *subsuite[3] = {NULL, NULL, NULL}; - struct kunit_suite * const *filtered; - struct kunit_test_filter filter = { - .suite_glob = "suite2", - .test_glob = "test2", - }; + struct suite_set suite_set = {.start = subsuite, .end = &subsuite[2]}; + struct suite_set got; subsuite[0] = alloc_fake_suite(test, "suite1", dummy_test_cases); subsuite[1] = alloc_fake_suite(test, "suite2", dummy_test_cases); /* Want: suite1, suite2, NULL -> suite2 (just test1), NULL */ - filtered = kunit_filter_subsuite(subsuite, &filter); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, filtered); - free_subsuite_at_end(test, filtered); + got = kunit_filter_suites(&suite_set, "suite2.test2"); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, got.start); + kfree_at_end(test, got.start); /* Validate we just have suite2 */ - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, filtered[0]); - KUNIT_EXPECT_STREQ(test, (const char *)filtered[0]->name, "suite2"); - KUNIT_EXPECT_FALSE(test, filtered[1]); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, got.start[0]); + KUNIT_EXPECT_STREQ(test, (const char *)got.start[0]->name, "suite2"); + // DO NOT SUBMIT: null-terminated for now. + KUNIT_ASSERT_EQ(test, got.end - got.start, 1); + KUNIT_EXPECT_FALSE(test, *got.end); /* Now validate we just have test2 */ - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, filtered[0]->test_cases); - KUNIT_EXPECT_STREQ(test, (const char *)filtered[0]->test_cases[0].name, "test2"); - KUNIT_EXPECT_FALSE(test, filtered[0]->test_cases[1].name); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, got.start[0]->test_cases); + KUNIT_EXPECT_STREQ(test, (const char *)got.start[0]->test_cases[0].name, "test2"); + KUNIT_EXPECT_FALSE(test, got.start[0]->test_cases[1].name); } -static void filter_subsuite_to_empty_test(struct kunit *test) +static void filter_suites_to_empty_test(struct kunit *test) { struct kunit_suite *subsuite[3] = {NULL, NULL, NULL}; - struct kunit_suite * const *filtered; - struct kunit_test_filter filter = { - .suite_glob = "not_found", - .test_glob = NULL, - }; + struct suite_set suite_set = {.start = subsuite, .end = &subsuite[2]}; + struct suite_set got; subsuite[0] = alloc_fake_suite(test, "suite1", dummy_test_cases); subsuite[1] = alloc_fake_suite(test, "suite2", dummy_test_cases); - filtered = kunit_filter_subsuite(subsuite, &filter); - free_subsuite_at_end(test, filtered); /* just in case */ - - KUNIT_EXPECT_FALSE_MSG(test, filtered, - "should be NULL to indicate no match"); -} - -static void kfree_subsuites_at_end(struct kunit *test, struct suite_set *suite_set) -{ - struct kunit_suite * const * const *suites; + got = kunit_filter_suites(&suite_set, "not_found"); + kfree_at_end(test, got.start); /* just in case */ - kfree_at_end(test, suite_set->start); - for (suites = suite_set->start; suites < suite_set->end; suites++) - free_subsuite_at_end(test, *suites); + KUNIT_EXPECT_PTR_EQ_MSG(test, got.start, got.end, + "should be empty to indicate no match"); } -static void filter_suites_test(struct kunit *test) -{ - /* Suites per-file are stored as a NULL terminated array */ - struct kunit_suite *subsuites[2][2] = { - {NULL, NULL}, - {NULL, NULL}, - }; - /* Match the memory layout of suite_set */ - struct kunit_suite * const * const suites[2] = { - subsuites[0], subsuites[1], - }; - - const struct suite_set suite_set = { - .start = suites, - .end = suites + 2, - }; - struct suite_set filtered = {.start = NULL, .end = NULL}; - - /* Emulate two files, each having one suite */ - subsuites[0][0] = alloc_fake_suite(test, "suite0", dummy_test_cases); - subsuites[1][0] = alloc_fake_suite(test, "suite1", dummy_test_cases); - - /* Filter out suite1 */ - filtered = kunit_filter_suites(&suite_set, "suite0"); - kfree_subsuites_at_end(test, &filtered); /* let us use ASSERTs without leaking */ - KUNIT_ASSERT_EQ(test, filtered.end - filtered.start, (ptrdiff_t)1); - - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, filtered.start); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, filtered.start[0]); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, filtered.start[0][0]); - KUNIT_EXPECT_STREQ(test, (const char *)filtered.start[0][0]->name, "suite0"); -} static struct kunit_case executor_test_cases[] = { KUNIT_CASE(parse_filter_test), - KUNIT_CASE(filter_subsuite_test), - KUNIT_CASE(filter_subsuite_test_glob_test), - KUNIT_CASE(filter_subsuite_to_empty_test), KUNIT_CASE(filter_suites_test), + KUNIT_CASE(filter_suites_test_glob_test), + KUNIT_CASE(filter_suites_to_empty_test), {} }; @@ -188,20 +139,6 @@ static void kfree_at_end(struct kunit *test, const void *to_free) (void *)to_free); } -static void free_subsuite_res_free(struct kunit_resource *res) -{ - kunit_free_subsuite(res->data); -} - -static void free_subsuite_at_end(struct kunit *test, - struct kunit_suite *const *to_free) -{ - if (IS_ERR_OR_NULL(to_free)) - return; - kunit_alloc_resource(test, NULL, free_subsuite_res_free, - GFP_KERNEL, (void *)to_free); -} - static struct kunit_suite *alloc_fake_suite(struct kunit *test, const char *suite_name, struct kunit_case *test_cases) base-commit: e7198adb84dcad671ad4f0e90aaa7e9fabf258dc -- 2.33.0.882.g93a45727a2-goog

3 years, 5 months

4
6
0 0

[PATCH v1 0/2] kselftest/arm64: Small fixes for sve-ptrace test

by Mark Brown

A couple of fairly minor fixes for the sve-ptrace test, one output thing and one for an issue which would generate spurious false positives. Mark Brown (2): kselftest/arm64: Skip VL_INHERIT tests for unsupported vector types kselftest/arm64: Correct logging of FPSIMD register read via ptrace tools/testing/selftests/arm64/fp/sve-ptrace.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) base-commit: e783362eb54cd99b2cac8b3a9aeac942e6f6ac07 -- 2.30.2

3 years, 5 months

3
7
0 0

[next] i386: ERROR: modpost: "__aeabi_uldivmod" [fs/btrfs/btrfs.ko] undefined!

by Naresh Kamboju

[ Please ignore this email if it is already reported ] Regression detected while building modules Linux next-20220127 on arm and i386 with kselftest (kselftest-merge) configs with gcc-11. Build errors i386: ------------------ make --silent --keep-going --jobs=8 ARCH=i386 CROSS_COMPILE=i686-linux-gnu- 'CC=sccache i686-linux-gnu-gcc' 'HOSTCC=sccache gcc' ERROR: modpost: "__umoddi3" [fs/btrfs/btrfs.ko] undefined! make[2]: *** [/builds/linux/scripts/Makefile.modpost:134: modules-only.symvers] Error 1 make[2]: *** Deleting file 'modules-only.symvers' Build errors arm: ------------------ make --silent --keep-going --jobs=8 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- 'CC=sccache arm-linux-gnueabihf-gcc' 'HOSTCC=sccache gcc' ERROR: modpost: "__aeabi_uldivmod" [fs/btrfs/btrfs.ko] undefined! make[2]: *** [/builds/linux/scripts/Makefile.modpost:134: modules-only.symvers] Error 1 Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> meta data: ----------- git describe: next-20220127 git_repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git_sha: 0eb96e2c58c03e79fc2ee833ba88bf9226986564 git_short_log: 0eb96e2c58c0 (\"Add linux-next specific files for 20220127\") target_arch: arm / i386 toolchain: gcc-11 Build log: ------------- https://builds.tuxbuild.com/24GSTOD7EpxnncxTZgHJzXw97t5/ https://builds.tuxbuild.com/24A38knX5TuIfIPU54KLcUReDcN/ steps to reproduce: ------------------- # To install tuxmake on your system globally: # sudo pip3 install -U tuxmake # # See https://docs.tuxmake.org/ for complete documentation. tuxmake --runtime podman --target-arch i386 --toolchain gcc-11 \ --kconfig https://builds.tuxbuild.com/24GSQgCAtqXT6UgGf37kLxUHlYX/config \ cpupower headers kernel kselftest kselftest-merge modules -- Linaro LKFT https://lkft.linaro.org

3 years, 5 months

2
1
0 0

[PATCH v2] kselftest: Fix vdso_test_abi return status

by Vincenzo Frascino

vdso_test_abi contains a batch of tests that verify the validity of the vDSO ABI. When a vDSO symbol is not found the relevant test is skipped reporting KSFT_SKIP. All the tests return values are then added in a single variable which is checked to verify failures. This approach can have side effects which result in reporting the wrong kselftest exit status. Fix vdso_test_abi verifying the return code of each test separately. Cc: Shuah Khan <shuah(a)kernel.org> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Reported-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino(a)arm.com> --- tools/testing/selftests/vDSO/vdso_test_abi.c | 143 ++++++++----------- 1 file changed, 62 insertions(+), 81 deletions(-) diff --git a/tools/testing/selftests/vDSO/vdso_test_abi.c b/tools/testing/selftests/vDSO/vdso_test_abi.c index 3d603f1394af..3e4dd47e404e 100644 --- a/tools/testing/selftests/vDSO/vdso_test_abi.c +++ b/tools/testing/selftests/vDSO/vdso_test_abi.c @@ -33,110 +33,106 @@ typedef long (*vdso_clock_gettime_t)(clockid_t clk_id, struct timespec *ts); typedef long (*vdso_clock_getres_t)(clockid_t clk_id, struct timespec *ts); typedef time_t (*vdso_time_t)(time_t *t); -static int vdso_test_gettimeofday(void) +#define VDSO_TEST_PASS_MSG() "\n%s(): PASS\n", __func__ +#define VDSO_TEST_FAIL_MSG(x) "\n%s(): %s FAIL\n", __func__, x +#define VDSO_TEST_SKIP_MSG(x) "\n%s(): SKIP: Could not find %s\n", __func__, x + +static void vdso_test_gettimeofday(void) { /* Find gettimeofday. */ vdso_gettimeofday_t vdso_gettimeofday = (vdso_gettimeofday_t)vdso_sym(version, name[0]); - if (!vdso_gettimeofday) { - printf("Could not find %s\n", name[0]); - return KSFT_SKIP; - } + if (!vdso_gettimeofday) + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[0])); struct timeval tv; long ret = vdso_gettimeofday(&tv, 0); if (ret == 0) { - printf("The time is %lld.%06lld\n", - (long long)tv.tv_sec, (long long)tv.tv_usec); + ksft_print_msg("The time is %lld.%06lld\n", + (long long)tv.tv_sec, (long long)tv.tv_usec); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[0]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[0])); } - - return KSFT_PASS; } -static int vdso_test_clock_gettime(clockid_t clk_id) +static void vdso_test_clock_gettime(clockid_t clk_id) { /* Find clock_gettime. */ vdso_clock_gettime_t vdso_clock_gettime = (vdso_clock_gettime_t)vdso_sym(version, name[1]); - if (!vdso_clock_gettime) { - printf("Could not find %s\n", name[1]); - return KSFT_SKIP; - } + if (!vdso_clock_gettime) + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[1])); struct timespec ts; long ret = vdso_clock_gettime(clk_id, &ts); if (ret == 0) { - printf("The time is %lld.%06lld\n", - (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_print_msg("The time is %lld.%06lld\n", + (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_test_result_pass(VDSO_TEST_PASS_MSG());; } else { - printf("%s failed\n", name[1]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[1])); } - - return KSFT_PASS; } -static int vdso_test_time(void) +static void vdso_test_time(void) { /* Find time. */ vdso_time_t vdso_time = (vdso_time_t)vdso_sym(version, name[2]); - if (!vdso_time) { - printf("Could not find %s\n", name[2]); - return KSFT_SKIP; - } + if (!vdso_time) + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[2])); long ret = vdso_time(NULL); if (ret > 0) { - printf("The time in hours since January 1, 1970 is %lld\n", + ksft_print_msg("The time in hours since January 1, 1970 is %lld\n", (long long)(ret / 3600)); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[2]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[2])); } - - return KSFT_PASS; } -static int vdso_test_clock_getres(clockid_t clk_id) +static void vdso_test_clock_getres(clockid_t clk_id) { + int clock_getres_fail = 0; + /* Find clock_getres. */ vdso_clock_getres_t vdso_clock_getres = (vdso_clock_getres_t)vdso_sym(version, name[3]); - if (!vdso_clock_getres) { - printf("Could not find %s\n", name[3]); - return KSFT_SKIP; - } + if (!vdso_clock_getres) + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[3])); struct timespec ts, sys_ts; long ret = vdso_clock_getres(clk_id, &ts); if (ret == 0) { - printf("The resolution is %lld %lld\n", - (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_print_msg("The vdso resolution is %lld %lld\n", + (long long)ts.tv_sec, (long long)ts.tv_nsec); } else { - printf("%s failed\n", name[3]); - return KSFT_FAIL; + clock_getres_fail++; } ret = syscall(SYS_clock_getres, clk_id, &sys_ts); - if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) { - printf("%s failed\n", name[3]); - return KSFT_FAIL; - } + ksft_print_msg("The syscall resolution is %lld %lld\n", + (long long)sys_ts.tv_sec, (long long)sys_ts.tv_nsec); + + if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) + clock_getres_fail++; - return KSFT_PASS; + if (clock_getres_fail > 0) { + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[3])); + } else { + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); + } } const char *vdso_clock_name[12] = { @@ -158,36 +154,23 @@ const char *vdso_clock_name[12] = { * This function calls vdso_test_clock_gettime and vdso_test_clock_getres * with different values for clock_id. */ -static inline int vdso_test_clock(clockid_t clock_id) +static inline void vdso_test_clock(clockid_t clock_id) { - int ret0, ret1; - - ret0 = vdso_test_clock_gettime(clock_id); - /* A skipped test is considered passed */ - if (ret0 == KSFT_SKIP) - ret0 = KSFT_PASS; + ksft_print_msg("\nclock_id: %s\n", vdso_clock_name[clock_id]); - ret1 = vdso_test_clock_getres(clock_id); - /* A skipped test is considered passed */ - if (ret1 == KSFT_SKIP) - ret1 = KSFT_PASS; + vdso_test_clock_gettime(clock_id); - ret0 += ret1; - - printf("clock_id: %s", vdso_clock_name[clock_id]); - - if (ret0 > 0) - printf(" [FAIL]\n"); - else - printf(" [PASS]\n"); - - return ret0; + vdso_test_clock_getres(clock_id); } +#define VDSO_TEST_PLAN 16 + int main(int argc, char **argv) { unsigned long sysinfo_ehdr = getauxval(AT_SYSINFO_EHDR); - int ret; + + ksft_print_header(); + ksft_set_plan(VDSO_TEST_PLAN); if (!sysinfo_ehdr) { printf("AT_SYSINFO_EHDR is not present!\n"); @@ -201,44 +184,42 @@ int main(int argc, char **argv) vdso_init_from_sysinfo_ehdr(getauxval(AT_SYSINFO_EHDR)); - ret = vdso_test_gettimeofday(); + vdso_test_gettimeofday(); #if _POSIX_TIMERS > 0 #ifdef CLOCK_REALTIME - ret += vdso_test_clock(CLOCK_REALTIME); + vdso_test_clock(CLOCK_REALTIME); #endif #ifdef CLOCK_BOOTTIME - ret += vdso_test_clock(CLOCK_BOOTTIME); + vdso_test_clock(CLOCK_BOOTTIME); #endif #ifdef CLOCK_TAI - ret += vdso_test_clock(CLOCK_TAI); + vdso_test_clock(CLOCK_TAI); #endif #ifdef CLOCK_REALTIME_COARSE - ret += vdso_test_clock(CLOCK_REALTIME_COARSE); + vdso_test_clock(CLOCK_REALTIME_COARSE); #endif #ifdef CLOCK_MONOTONIC - ret += vdso_test_clock(CLOCK_MONOTONIC); + vdso_test_clock(CLOCK_MONOTONIC); #endif #ifdef CLOCK_MONOTONIC_RAW - ret += vdso_test_clock(CLOCK_MONOTONIC_RAW); + vdso_test_clock(CLOCK_MONOTONIC_RAW); #endif #ifdef CLOCK_MONOTONIC_COARSE - ret += vdso_test_clock(CLOCK_MONOTONIC_COARSE); + vdso_test_clock(CLOCK_MONOTONIC_COARSE); #endif #endif - ret += vdso_test_time(); - - if (ret > 0) - return KSFT_FAIL; + vdso_test_time(); - return KSFT_PASS; + ksft_print_cnts(); + return ksft_get_fail_cnt() == 0 ? KSFT_PASS : KSFT_FAIL; } -- 2.34.1

3 years, 5 months

2
2
0 0

[PATCH 0/5] Miscellaneous trivial fixes

by Cristian Marussi

Hi Shuah, a small series collecting a few trivial fixes that I have already sent previously (~Dec2021) as distinct patches. They are mostly trivial patches addressing failures that seemed more sensible to be marked as skips instead. (at least to me ...). Original developers are in Cc. (but not heard back from anyone :D) Thanks, Cristian Cristian Marussi (5): selftests: skip mincore.check_file_mmap when fs lacks needed support kselftest: Fix vdso_test_time to pass on skips selftests: openat2: Print also errno in failure messages selftests: openat2: Add missing dependency in Makefile selftests: openat2: Skip testcases that fail with EOPNOTSUPP .../selftests/mincore/mincore_selftest.c | 20 +++++++++++++------ tools/testing/selftests/openat2/Makefile | 2 +- tools/testing/selftests/openat2/helpers.h | 12 ++++++----- .../testing/selftests/openat2/openat2_test.c | 12 ++++++++++- tools/testing/selftests/vDSO/vdso_test_abi.c | 3 ++- 5 files changed, 35 insertions(+), 14 deletions(-) -- 2.17.1

3 years, 5 months

3
17
0 0

[RFC PATCH 00/15] rseq uapi and selftest updates

by Mathieu Desnoyers

Update the rseq selftests to adapt to the userspace ABI chosen by glibc (will be released in February 2022). Provide a fallback implementation to work with older glibc as well. Remove broken 32-bit little/big endian accessor fields in rseq uapi. Integrate various fixes gathered from librseq, including work-around for known gcc and clang compiler bugs with asm goto. The uplift to glibc's userspace ABI means we can now use %fs/%gs segment selectors directly in the inline assembler for accesses to the rseq thread area on x86. Feedback is welcome, Thanks, Mathieu Mathieu Desnoyers (15): selftests/rseq: introduce own copy of rseq uapi header rseq: Remove broken uapi field layout on 32-bit little endian selftests/rseq: Remove useless assignment to cpu variable selftests/rseq: Remove volatile from __rseq_abi selftests/rseq: Introduce rseq_get_abi() helper selftests/rseq: Introduce thread pointer getters selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35 selftests/rseq: Fix ppc32: wrong rseq_cs 32-bit field pointer on big endian selftests/rseq: Fix ppc32 missing instruction selection "u" and "x" for load/store selftests/rseq: Fix ppc32 offsets by using long rather than off_t selftests/rseq: Fix warnings about #if checks of undefined tokens selftests/rseq: Remove arm/mips asm goto compiler work-around selftests/rseq: Fix: work-around asm goto compiler bugs selftests/rseq: x86-64: use %fs segment selector for accessing rseq thread area selftests/rseq: x86-32: use %gs segment selector for accessing rseq thread area include/uapi/linux/rseq.h | 17 +- tools/testing/selftests/rseq/Makefile | 2 +- .../selftests/rseq/basic_percpu_ops_test.c | 2 +- tools/testing/selftests/rseq/compiler.h | 30 +++ tools/testing/selftests/rseq/param_test.c | 8 +- tools/testing/selftests/rseq/rseq-abi.h | 151 +++++++++++++ tools/testing/selftests/rseq/rseq-arm.h | 110 +++++----- tools/testing/selftests/rseq/rseq-arm64.h | 79 +++++-- .../rseq/rseq-generic-thread-pointer.h | 25 +++ tools/testing/selftests/rseq/rseq-mips.h | 71 ++----- .../selftests/rseq/rseq-ppc-thread-pointer.h | 30 +++ tools/testing/selftests/rseq/rseq-ppc.h | 128 +++++++---- tools/testing/selftests/rseq/rseq-s390.h | 55 +++-- tools/testing/selftests/rseq/rseq-skip.h | 2 +- .../selftests/rseq/rseq-thread-pointer.h | 19 ++ .../selftests/rseq/rseq-x86-thread-pointer.h | 40 ++++ tools/testing/selftests/rseq/rseq-x86.h | 200 ++++++++++++------ tools/testing/selftests/rseq/rseq.c | 163 +++++++------- tools/testing/selftests/rseq/rseq.h | 29 ++- 19 files changed, 793 insertions(+), 368 deletions(-) create mode 100644 tools/testing/selftests/rseq/compiler.h create mode 100644 tools/testing/selftests/rseq/rseq-abi.h create mode 100644 tools/testing/selftests/rseq/rseq-generic-thread-pointer.h create mode 100644 tools/testing/selftests/rseq/rseq-ppc-thread-pointer.h create mode 100644 tools/testing/selftests/rseq/rseq-thread-pointer.h create mode 100644 tools/testing/selftests/rseq/rseq-x86-thread-pointer.h -- 2.17.1

3 years, 5 months

5
25
0 0

[PATCH net-next 1/2] mctp: test: disallow MCTP_TEST when building as a module

by Jeremy Kerr

The current kunit infrastructure defines its own module_init() when built as a module, which conflicts with the mctp core's own. So, only allow MCTP_TEST when both MCTP and KUNIT are built-in. Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Jeremy Kerr <jk(a)codeconstruct.com.au> --- net/mctp/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mctp/Kconfig b/net/mctp/Kconfig index 15267a5043d9..868c92272cbd 100644 --- a/net/mctp/Kconfig +++ b/net/mctp/Kconfig @@ -13,6 +13,6 @@ menuconfig MCTP channel. config MCTP_TEST - tristate "MCTP core tests" if !KUNIT_ALL_TESTS - depends on MCTP && KUNIT + bool "MCTP core tests" if !KUNIT_ALL_TESTS + depends on MCTP=y && KUNIT=y default KUNIT_ALL_TESTS -- 2.30.2

3 years, 5 months

5
20
0 0

[PATCH 1/3] selftests/zram: Remove obsolete max_comp_streams interface

by Yang Xu

Since kernel commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So remove it. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> --- tools/testing/selftests/zram/zram01.sh | 4 ---- tools/testing/selftests/zram/zram02.sh | 4 ---- tools/testing/selftests/zram/zram_lib.sh | 22 ---------------------- 3 files changed, 30 deletions(-) diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index 114863d9fb87..28583e4ae546 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -15,9 +15,6 @@ ERR_CODE=0 # Test will create the following number of zram devices: dev_num=1 -# This is a list of parameters for zram devices. -# Number of items must be equal to 'dev_num' parameter. -zram_max_streams="2" # The zram sysfs node 'disksize' value can be either in bytes, # or you can use mem suffixes. But in some old kernels, mem @@ -72,7 +69,6 @@ zram_fill_fs() check_prereqs zram_load -zram_max_streams zram_compress_alg zram_set_disksizes zram_set_memlimit diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index e83b404807c0..d664974a1317 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -14,9 +14,6 @@ ERR_CODE=0 # Test will create the following number of zram devices: dev_num=1 -# This is a list of parameters for zram devices. -# Number of items must be equal to 'dev_num' parameter. -zram_max_streams="2" # The zram sysfs node 'disksize' value can be either in bytes, # or you can use mem suffixes. But in some old kernels, mem @@ -30,7 +27,6 @@ zram_mem_limits="1M" check_prereqs zram_load -zram_max_streams zram_set_disksizes zram_set_memlimit zram_makeswap diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 6f872f266fd1..0c49f9d1d563 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -82,28 +82,6 @@ zram_load() fi } -zram_max_streams() -{ - echo "set max_comp_streams to zram device(s)" - - local i=0 - for max_s in $zram_max_streams; do - local sys_path="/sys/block/zram${i}/max_comp_streams" - echo $max_s > $sys_path || \ - echo "FAIL failed to set '$max_s' to $sys_path" - sleep 1 - local max_streams=$(cat $sys_path) - - [ "$max_s" -ne "$max_streams" ] && \ - echo "FAIL can't set max_streams '$max_s', get $max_stream" - - i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" - done - - echo "zram max streams: OK" -} - zram_compress_alg() { echo "test that we can set compression algorithm" -- 2.23.0

3 years, 5 months

4
18
0 0

[PATCH v4] selftests/kselftest/runner.sh: Pass optional command parameters in environment

by Cristian Marussi

Some testcases allow for optional commandline parameters but as of now there is now way to provide such arguments to the runner script. Add support to retrieve such optional command parameters fron environment variables named so as to include the all-uppercase test executable name, sanitized substituting any non-acceptable varname characters with "_", following the pattern: KSELFTEST_<UPPERCASE_SANITIZED_TEST_NAME>_ARGS="options" Optional command parameters support is not available if 'tr' is not installed on the test system. Cc: Kees Cook <keescook(a)chromium.org> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> --- v3 --> v4 - rebased on v5.17-rc1 v2 --> v3 - improved varname sanitation v1 --> v2 - using env vars instead of settings file - added missing varname sanitation Usage examples: KSELFTEST_RTCTEST_ARGS="/dev/rtc1" /opt/ksft_fixes/run_kselftest.sh -c rtc KSELFTEST_CPU_ON_OFF_TEST_SH_ARGS="-a -p 10" /opt/ksft_fixes/run_kselftest.sh -c cpu-hotplug --- tools/testing/selftests/kselftest/runner.sh | 30 ++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh index a9ba782d8ca0..294619ade49f 100644 --- a/tools/testing/selftests/kselftest/runner.sh +++ b/tools/testing/selftests/kselftest/runner.sh @@ -18,6 +18,8 @@ if [ -z "$BASE_DIR" ]; then exit 1 fi +TR_CMD=$(command -v tr) + # If Perl is unavailable, we must fall back to line-at-a-time prefixing # with sed instead of unbuffered output. tap_prefix() @@ -49,6 +51,31 @@ run_one() # Reset any "settings"-file variables. export kselftest_timeout="$kselftest_default_timeout" + + # Safe default if tr not available + kselftest_cmd_args_ref="KSELFTEST_ARGS" + + # Optional arguments for this command, possibly defined as an + # environment variable built using the test executable in all + # uppercase and sanitized substituting non acceptable shell + # variable name characters with "_" as in: + # + # KSELFTEST_<UPPERCASE_SANITIZED_TESTNAME>_ARGS="<options>" + # + # e.g. + # + # rtctest --> KSELFTEST_RTCTEST_ARGS="/dev/rtc1" + # + # cpu-on-off-test.sh --> KSELFTEST_CPU_ON_OFF_TEST_SH_ARGS="-a -p 10" + # + if [ -n "$TR_CMD" ]; then + BASENAME_SANITIZED=$(echo "$BASENAME_TEST" | \ + $TR_CMD -d "[:blank:][:cntrl:]" | \ + $TR_CMD -c "[:alnum:]_" "_" | \ + $TR_CMD [:lower:] [:upper:]) + kselftest_cmd_args_ref="KSELFTEST_${BASENAME_SANITIZED}_ARGS" + fi + # Load per-test-directory kselftest "settings" file. settings="$BASE_DIR/$DIR/settings" if [ -r "$settings" ] ; then @@ -69,7 +96,8 @@ run_one() echo "# Warning: file $TEST is missing!" echo "not ok $test_num $TEST_HDR_MSG" else - cmd="./$BASENAME_TEST" + eval kselftest_cmd_args="\$${kselftest_cmd_args_ref:-}" + cmd="./$BASENAME_TEST $kselftest_cmd_args" if [ ! -x "$TEST" ]; then echo "# Warning: file $TEST is not executable" -- 2.17.1

3 years, 5 months

2
1
0 0

[PATCH] selftests: futex: Use variable MAKE instead of make

by Muhammad Usama Anjum

Recursive make commands should always use the variable MAKE, not the explicit command name ‘make’. This has benefits and removes the following warning when multiple jobs are used for the build: make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT") Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/futex/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/futex/Makefile b/tools/testing/selftests/futex/Makefile index 12631f0076a10..11e157d7533b8 100644 --- a/tools/testing/selftests/futex/Makefile +++ b/tools/testing/selftests/futex/Makefile @@ -11,7 +11,7 @@ all: @for DIR in $(SUBDIRS); do \ BUILD_TARGET=$(OUTPUT)/$$DIR; \ mkdir $$BUILD_TARGET -p; \ - make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\ + $(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\ if [ -e $$DIR/$(TEST_PROGS) ]; then \ rsync -a $$DIR/$(TEST_PROGS) $$BUILD_TARGET/; \ fi \ @@ -32,6 +32,6 @@ override define CLEAN @for DIR in $(SUBDIRS); do \ BUILD_TARGET=$(OUTPUT)/$$DIR; \ mkdir $$BUILD_TARGET -p; \ - make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\ + $(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\ done endef -- 2.30.2

3 years, 5 months

3
2
0 0

[PATCH 0/3] kunit: further reduce stack usage of asserts

by Daniel Latypov

If the compiler doesn't optimize them away, each kunit assertion (use of KUNIT_EXPECT_EQ, etc.) can use 88 bytes of stack space in the worst and most common case. This has led to compiler warnings for certain configs + arches [1]. This series builds upon [2] which cut down kunit_assert from 48 => 24 bytes, but only reduced kunit_binary_assert (the most common one) from 88 => 48. Now we have kunit_assert = 8 and kunit_binary_assert = 32. The cost is we need to pass around another parameter to some functions (struct va_format *), and we introduce a new type (sturct kunit_binary_assert_text) for holding the textual representation of the KUNIT_EXPECT_EQ arguments. Note: it's possible to get kunit_assert = 0 and kunit_binary_assert = 24 by removing the `format` function pointer field from kunit_assert. I think it's an improvement, but others might think that readability suffers from doing so, so I'm leaving that off from this series. Meta: this series applies on top of 5.17-rc1 + [2] and [3]. That should be available at in Shuah's kunit branch [4], but my version of git is constantly segfaulting, so I can't try and rebase to verify. [1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ [2] https://lore.kernel.org/linux-kselftest/20220113165931.451305-6-dlatypov@go… [3] https://lore.kernel.org/linux-kselftest/20220118223506.1701553-1-dlatypov@g… [4] https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/?… Daniel Latypov (3): kunit: remove va_format from kunit_assert kunit: consolidate KUNIT_INIT_BINARY_ASSERT_STRUCT macros kunit: factor out str constants from binary assertion structs include/kunit/assert.h | 152 ++++++++++++----------------------------- include/kunit/test.h | 32 +++++---- lib/kunit/assert.c | 65 ++++++++++-------- lib/kunit/test.c | 12 ++-- 4 files changed, 104 insertions(+), 157 deletions(-) -- 2.35.0.rc2.247.g8bbb082509-goog

3 years, 5 months

3
13
0 0

[PATCH] selftests/exec: Remove pipe from TEST_GEN_FILES

by Muhammad Usama Anjum

pipe named FIFO special file is being created in execveat.c to perform some tests. Makefile doesn't need to do anything with the pipe. When it isn't found, Makefile generates the following build error: make: *** No rule to make target '/linux_mainline/tools/testing/selftests/exec/pipe', needed by 'all'. Stop. Fixes: 61016db15b8e ("selftests/exec: Verify execve of non-regular files fail") Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/exec/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/exec/Makefile b/tools/testing/selftests/exec/Makefile index dd61118df66ed..12c5e27d32c16 100644 --- a/tools/testing/selftests/exec/Makefile +++ b/tools/testing/selftests/exec/Makefile @@ -5,7 +5,7 @@ CFLAGS += -D_GNU_SOURCE TEST_PROGS := binfmt_script non-regular TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216 -TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir pipe +TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir # Makefile is a run-time dependency, since it's accessed by the execveat test TEST_FILES := Makefile -- 2.30.2

3 years, 5 months

3
3
0 0

[PATCH v3] kselftest: kvm/arm64: Skip tests if we can't create a vgic-v3

by Mark Brown

The arch_timer and vgic_irq kselftests assume that they can create a vgic-v3, using the library function vgic_v3_setup() which aborts with a test failure if it is not possible to do so. Since vgic-v3 can only be instantiated on systems where the host has GICv3 this leads to false positives on older systems where that is not the case. Fix this by changing vgic_v3_setup() to return an error if the vgic can't be instantiated and have the callers skip if this happens. We could also exit flagging a skip in vgic_v3_setup() but this would prevent future test cases conditionally deciding which GIC to use or generally doing more complex output. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- v3: - Use custom print_skip() helper. - Use internal version of _kvm_create_device. v2: - The test for being able to create the GIC doesn't actually instantiate it, add a call doing so in that case. tools/testing/selftests/kvm/aarch64/arch_timer.c | 7 ++++++- tools/testing/selftests/kvm/aarch64/vgic_irq.c | 4 ++++ tools/testing/selftests/kvm/lib/aarch64/vgic.c | 4 +++- 3 files changed, 13 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/aarch64/arch_timer.c b/tools/testing/selftests/kvm/aarch64/arch_timer.c index 9ad38bd360a4..b08d30bf71c5 100644 --- a/tools/testing/selftests/kvm/aarch64/arch_timer.c +++ b/tools/testing/selftests/kvm/aarch64/arch_timer.c @@ -366,6 +366,7 @@ static struct kvm_vm *test_vm_create(void) { struct kvm_vm *vm; unsigned int i; + int ret; int nr_vcpus = test_args.nr_vcpus; vm = vm_create_default_with_vcpus(nr_vcpus, 0, 0, guest_code, NULL); @@ -382,7 +383,11 @@ static struct kvm_vm *test_vm_create(void) ucall_init(vm, NULL); test_init_timer_irq(vm); - vgic_v3_setup(vm, nr_vcpus, 64, GICD_BASE_GPA, GICR_BASE_GPA); + ret = vgic_v3_setup(vm, nr_vcpus, 64, GICD_BASE_GPA, GICR_BASE_GPA); + if (ret < 0) { + print_skip("Failed to create vgic-v3"); + exit(KSFT_SKIP); + } /* Make all the test's cmdline args visible to the guest */ sync_global_to_guest(vm, test_args); diff --git a/tools/testing/selftests/kvm/aarch64/vgic_irq.c b/tools/testing/selftests/kvm/aarch64/vgic_irq.c index e6c7d7f8fbd1..7eca97799917 100644 --- a/tools/testing/selftests/kvm/aarch64/vgic_irq.c +++ b/tools/testing/selftests/kvm/aarch64/vgic_irq.c @@ -761,6 +761,10 @@ static void test_vgic(uint32_t nr_irqs, bool level_sensitive, bool eoi_split) gic_fd = vgic_v3_setup(vm, 1, nr_irqs, GICD_BASE_GPA, GICR_BASE_GPA); + if (gic_fd < 0) { + print_skip("Failed to create vgic-v3, skipping"); + exit(KSFT_SKIP); + } vm_install_exception_handler(vm, VECTOR_IRQ_CURRENT, guest_irq_handlers[args.eoi_split][args.level_sensitive]); diff --git a/tools/testing/selftests/kvm/lib/aarch64/vgic.c b/tools/testing/selftests/kvm/lib/aarch64/vgic.c index b3a0fca0d780..f5cd0c536d85 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/vgic.c +++ b/tools/testing/selftests/kvm/lib/aarch64/vgic.c @@ -52,7 +52,9 @@ int vgic_v3_setup(struct kvm_vm *vm, unsigned int nr_vcpus, uint32_t nr_irqs, nr_vcpus, nr_vcpus_created); /* Distributor setup */ - gic_fd = kvm_create_device(vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); + if (_kvm_create_device(vm, KVM_DEV_TYPE_ARM_VGIC_V3, + false, &gic_fd) != 0) + return -1; kvm_device_access(gic_fd, KVM_DEV_ARM_VGIC_GRP_NR_IRQS, 0, &nr_irqs, true); -- 2.30.2

3 years, 5 months

4
7
0 0

Problems with rcutorture on ppc64le: allmodconfig(2) and other failures

by Paul Menzel

Dear Linux folks, On an IBM S822LC SL822 (ppc64le) with Ubuntu 21.04, I tried to torture the RCU. allmodconfig(2) failed though. ``` $ git describe v5.16-10660-g0c947b893d69 $ tools/testing/selftests/rcutorture/bin/torture.sh --duration 10 --- tools/testing/selftests/rcutorture/bin/torture.sh --duration 10 --- Results directory: 2022.01.17-18.44.36-torture --- allmodconfig: Start Mon Jan 17 06:44:36 PM CET 2022 --- rcutorture: Start Mon Jan 17 06:45:02 PM CET 2022 --- rcutorture-kasan: Start Mon Jan 17 07:07:41 PM CET 2022 --- locktorture: Start Mon Jan 17 07:33:38 PM CET 2022 --- locktorture-kasan: Start Mon Jan 17 07:37:05 PM CET 2022 --- scftorture: Start Mon Jan 17 07:40:54 PM CET 2022 --- scftorture-kasan: Start Mon Jan 17 07:43:31 PM CET 2022 --- refscale-rcu: Start Mon Jan 17 07:46:34 PM CET 2022 --- refscale-rcu-kasan: Start Mon Jan 17 07:49:08 PM CET 2022 --- refscale-srcu: Start Mon Jan 17 07:52:05 PM CET 2022 --- refscale-srcu-kasan: Start Mon Jan 17 07:54:39 PM CET 2022 --- refscale-rcu-tasks: Start Mon Jan 17 07:57:35 PM CET 2022 --- refscale-rcu-tasks-kasan: Start Mon Jan 17 08:00:10 PM CET 2022 --- refscale-rcu-trace: Start Mon Jan 17 08:03:06 PM CET 2022 --- refscale-rcu-trace-kasan: Start Mon Jan 17 08:05:40 PM CET 2022 --- refscale-refcnt: Start Mon Jan 17 08:08:40 PM CET 2022 --- refscale-refcnt-kasan: Start Mon Jan 17 08:11:15 PM CET 2022 --- refscale-rwlock: Start Mon Jan 17 08:14:14 PM CET 2022 --- refscale-rwlock-kasan: Start Mon Jan 17 08:16:48 PM CET 2022 --- refscale-rwsem: Start Mon Jan 17 08:19:45 PM CET 2022 --- refscale-rwsem-kasan: Start Mon Jan 17 08:22:18 PM CET 2022 --- refscale-lock: Start Mon Jan 17 08:25:17 PM CET 2022 --- refscale-lock-kasan: Start Mon Jan 17 08:27:53 PM CET 2022 --- refscale-lock-irq: Start Mon Jan 17 08:30:58 PM CET 2022 --- refscale-lock-irq-kasan: Start Mon Jan 17 08:33:42 PM CET 2022 --- refscale-acqrel: Start Mon Jan 17 08:36:58 PM CET 2022 --- refscale-acqrel-kasan: Start Mon Jan 17 08:39:33 PM CET 2022 --- refscale-clock: Start Mon Jan 17 08:42:33 PM CET 2022 --- refscale-clock-kasan: Start Mon Jan 17 08:45:08 PM CET 2022 --- rcuscale-rcu: Start Mon Jan 17 08:48:06 PM CET 2022 --- rcuscale-rcu-kasan: Start Mon Jan 17 08:49:25 PM CET 2022 --- rcuscale-srcu: Start Mon Jan 17 08:50:56 PM CET 2022 --- rcuscale-srcu-kasan: Start Mon Jan 17 08:52:14 PM CET 2022 --- rcuscale-srcud: Start Mon Jan 17 08:53:43 PM CET 2022 --- rcuscale-srcud-kasan: Start Mon Jan 17 08:55:01 PM CET 2022 --- rcuscale-tasks: Start Mon Jan 17 08:56:31 PM CET 2022 --- rcuscale-tasks-kasan: Start Mon Jan 17 08:57:48 PM CET 2022 --- rcuscale-tasks-tracing: Start Mon Jan 17 08:59:17 PM CET 2022 --- rcuscale-tasks-tracing-kasan: Start Mon Jan 17 09:00:35 PM CET 2022 --- rcuscale-kvfree: Start Mon Jan 17 09:02:05 PM CET 2022 --- rcuscale-kvfree-kasan: Start Mon Jan 17 09:03:23 PM CET 2022 --- clocksourcewd-1: Start Mon Jan 17 09:04:52 PM CET 2022 --- clocksourcewd-1-kasan: Start Mon Jan 17 09:06:11 PM CET 2022 --- clocksourcewd-2: Start Mon Jan 17 09:07:42 PM CET 2022 --- clocksourcewd-2-kasan: Start Mon Jan 17 09:08:59 PM CET 2022 --- tools/testing/selftests/rcutorture/bin/torture.sh --duration 10 --- Done Mon Jan 17 09:10:29 PM CET 2022 SUCCESSES: rcutorture(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcutorture rcutorture-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcutorture-kasan locktorture(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-locktorture locktorture-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-locktorture-kasan scftorture(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-scftorture scftorture-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-scftorture-kasan refscale-rcu(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-rcu refscale-rcu-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-rcu-kasan refscale-srcu(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-srcu refscale-srcu-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-srcu-kasan refscale-rcu-tasks(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-rcu-tasks refscale-rcu-tasks-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-rcu-tasks-kasan refscale-rcu-trace(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-rcu-trace refscale-rcu-trace-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-rcu-trace-kasan refscale-refcnt(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-refcnt refscale-refcnt-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-refcnt-kasan refscale-rwlock(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-rwlock refscale-rwlock-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-rwlock-kasan refscale-rwsem(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-rwsem refscale-rwsem-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-rwsem-kasan refscale-lock(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-lock refscale-lock-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-lock-kasan refscale-lock-irq(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-lock-irq refscale-lock-irq-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-lock-irq-kasan refscale-acqrel(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-acqrel refscale-acqrel-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-acqrel-kasan refscale-clock(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-clock refscale-clock-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-refscale-clock-kasan rcuscale-rcu(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcuscale-rcu rcuscale-rcu-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcuscale-rcu-kasan rcuscale-srcu(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcuscale-srcu rcuscale-srcu-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcuscale-srcu-kasan rcuscale-srcud(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcuscale-srcud rcuscale-srcud-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcuscale-srcud-kasan rcuscale-tasks(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcuscale-tasks rcuscale-tasks-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcuscale-tasks-kasan rcuscale-tasks-tracing(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcuscale-tasks-tracing rcuscale-tasks-tracing-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcuscale-tasks-tracing-kasan rcuscale-kvfree(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcuscale-kvfree rcuscale-kvfree-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcuscale-kvfree-kasan clocksourcewd-1(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-clocksourcewd-1 clocksourcewd-1-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-clocksourcewd-1-kasan clocksourcewd-2(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-clocksourcewd-2 clocksourcewd-2-kasan(0) /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-clocksourcewd-2-kasan FAILURES: allmodconfig(2) tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/allmodconfig Started at Mon Jan 17 06:44:36 PM CET 2022, ended at Mon Jan 17 09:10:29 PM CET 2022, duration 2:25:53. Summary: Successes: 44 Failures: 1. Size before compressing 0 files: 86M Mon Jan 17 09:10:29 PM CET 2022 Waiting for final batch 1 of 22 compressions Mon Jan 17 09:10:29 PM CET 2022 Size after compressing 0 files: 86M Mon Jan 17 09:10:29 PM CET 2022 Total duration 2:25:53. ``` Here is an excerpt from `Make.out` [1]: ``` CC [M] sound/isa/ad1848/ad1848.o CC security/keys/encrypted-keys/ecryptfs_format.o In file included from <command-line>: ././include/linux/kconfig.h:5:10: fatal error: generated/autoconf.h: No such file or directory 5 | #include <generated/autoconf.h> | ^~~~~~~~~~~~~~~~~~~~~~ compilation terminated. CC [M] fs/reiserfs/inode.o In file included from <command-line>: ././include/linux/kconfig.h:5:10: fatal error: generated/autoconf.h: No such file or directory 5 | #include <generated/autoconf.h> | ^~~~~~~~~~~~~~~~~~~~~~ compilation terminated. In file included from <command-line>: ././include/linux/kconfig.h:5:10: fatal error: generated/autoconf.h: No such file or directory 5 | #include <generated/autoconf.h> | ^~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[3]: *** [scripts/Makefile.build:288: security/keys/encrypted-keys/ecryptfs_format.o] Error 1 make[3]: *** Waiting for unfinished jobs.... In file included from <command-line>: ././include/linux/kconfig.h:5:10: fatal error: generated/autoconf.h: No such file or directory 5 | #include <generated/autoconf.h> | ^~~~~~~~~~~~~~~~~~~~~~ compilation terminated. CC [M] sound/i2c/i2c.o In file included from <command-line>: ././include/linux/kconfig.h:5:10: fatal error: generated/autoconf.h: No such file or directory 5 | #include <generated/autoconf.h> | ^~~~~~~~~~~~~~~~~~~~~~ compilation terminated. CC [M] fs/ext4/block_validity.o make[3]: *** [scripts/Makefile.build:288: sound/isa/ad1848/ad1848.o] Error 1 make[2]: *** [scripts/Makefile.build:550: sound/isa/ad1848] Error 2 make[1]: *** [scripts/Makefile.build:550: sound/isa] Error 2 make[1]: *** Waiting for unfinished jobs.... ``` I wonder why other builds seem to have worked. But checking the other results, despite the output saying the runs were a success the Linux kernel builds seem to have failed. For example [2]: ``` $ more tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcutorture/log tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 7 --configs CFLIST --trust-make --bootargs rcupdate.rcu_cpu_stall_suppress_at_boot=1 torture.disable_onoff_at_boot rcupdate.rcu_task_stall_timeout=30000 --datestamp 2022.01.17-18.44.36-torture/results-rcutorture ----Start batch 1: Mon Jan 17 06:45:03 PM CET 2022 TREE03 16: Starting build. Mon Jan 17 06:45:03 PM CET 2022 […] TREE09 1: Build complete. Mon Jan 17 07:07:40 PM CET 2022 ---- No kernel runs. Mon Jan 17 07:07:40 PM CET 2022 ---- TREE03 16: Build/run results: --- Mon Jan 17 06:45:03 PM CET 2022: Starting build, PID 3530842 :CONFIG_HYPERVISOR_GUEST=y: improperly set :CONFIG_PARAVIRT=y: improperly set Kernel build error make[2]: *** No rule to make target 'arch/powerpc/kvm//dev/shm/linux/tools/testing/selftests/rcutorture/kvm_main.o', needed by 'arch/powerpc/kvm/kvm.o'. Stop. make[1]: *** [scripts/Makefile.build:550: arch/powerpc/kvm] Error 2 make: *** [Makefile:1840: arch/powerpc] Error 2 Run aborted. Build failed, not running KVM, see /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcutorture/TREE03. […] ESC[031mBUG: ESC[mBuild failed /dev/shm/linux/tools/testing/selftests/rcutorture/res/2022.01.17-18.44.36-torture/results-rcutorture/TREE09 --- Done at Mon Jan 17 07:07:41 PM CET 2022 (22:39.0) exitcode 0 ``` Kind regards, Paul [1]: https://owww.molgen.mpg.de/~pmenzel/allmodconf-Make.out.txt [2]: https://owww.molgen.mpg.de/~pmenzel/rcutorture-log.txt

3 years, 5 months

3
22
0 0

[PATCH 0/2] sigaltstack: return only one flag

by Stas Sergeev

Currently sigaltstack() can return multiple flags, for example SS_DISABLE|SS_AUTODISARM. This confuses libraries (including asan runtime) and contradicts the man page. Patch 1 fixes this problem by ignoring any flag passed with SS_DISABLE. Patch 2 adds a test-case for that scenario. Signed-off-by: Stas Sergeev <stsp2(a)yandex.ru> CC: "Eric W. Biederman" <ebiederm(a)xmission.com> CC: Kees Cook <keescook(a)chromium.org> CC: Jens Axboe <axboe(a)kernel.dk> CC: Peter Zijlstra <peterz(a)infradead.org> CC: Marco Elver <elver(a)google.com> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Alexey Gladkov <legion(a)kernel.org> CC: Andrew Lutomirski <luto(a)mit.edu> CC: Shuah Khan <shuah(a)kernel.org> CC: "Chang S. Bae" <chang.seok.bae(a)intel.com> CC: Borislav Petkov <bp(a)suse.de> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Len Brown <len.brown(a)intel.com> CC: linux-kselftest(a)vger.kernel.org CC: linux-kernel(a)vger.kernel.org Stas Sergeev (2): sigaltstack: ignore flags if SS_DISABLE is set selftests: sigaltstack: add new SS_DISABLE test kernel/signal.c | 1 + tools/testing/selftests/sigaltstack/sas.c | 48 ++++++++++++----------- 2 files changed, 26 insertions(+), 23 deletions(-) -- 2.34.1

3 years, 5 months

1
1
0 0

[PATCH v10 00/39] arm64/sme: Initial support for the Scalable Matrix Extension

by Mark Brown

This series provides initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. A more detailed overview can be found in [1]. For the kernel SME can be thought of as a series of features which are intended to be used together by applications but operate mostly orthogonally: - The ZA matrix register. - Streaming mode, in which ZA can be accessed and a subset of SVE features are available. - A second vector length, used for streaming mode SVE and ZA and controlled using a similar interface to that for SVE. - TPIDR2, a new userspace controllable system register intended for use by the C library for storing context related to the ZA ABI. A substantial part of the series is dedicated to refactoring the existing SVE support so that we don't need to duplicate code for handling vector lengths and the SVE registers, this involves creating an array of vector types and making the users take the vector type as a parameter. I'm not 100% happy with this but wasn't able to come up with anything better, duplicating code definitely felt like a bad idea so this felt like the least bad thing. If this approach makes sense to people it might make sense to split this off into a separate series and/or merge it while the rest is pending review to try to make things a little more digestable, the series is very large so it'd probably make things easier to digest if some of the preparatory refactoring could be merged before the rest is ready. One feature of the architecture of particular note is that switching to and from streaming mode may change the size of and invalidate the contents of the SVE registers, and when in streaming mode the FFR is not accessible. This complicates aspects of the ABI like signal handling and ptrace. This initial implementation is mainly intended to get the ABI in place, there are several areas which will be worked on going forwards - some of these will be blockers, others could be handled in followup serieses: - SME is currently not supported for KVM guests, this will be done as a followup series. A host system can use SME and run KVM guests but SME is not available in the guests. - The KVM host support is done in a very simplistic way, were anyone to attempt to use it in production there would be performance impacts on hosts with SME support. As part of this we also add enumeration of fine grained traps. - There is not currently ptrace or signal support TPIDR2, this will be done as a followup series. - No support is currently provided for scheduler control of SME or SME applications, given the size of the SME register state the context switch overhead may be noticable so this may be needed especially for real time applications. Similar concerns already exist for larger SVE vector lengths but are amplified for SME, particularly as the vector length increases. - There has been no work on optimising the performance of anything the kernel does. It is not expected that any systems will be encountered that support SME but not SVE, SME is an ARMv9 feature and SVE is mandatory for ARMv9. The code attempts to handle any such systems that are encountered but this hasn't been tested extensively. v10: - Actually do the rebase of fixups from the previous version into relevant patches. v9: - Remove defensive programming around IS_ENABLED() and FGT in KVM code. - Fix naming of TPIDR2 FGT register bit. - Add patches making handling of floating point register bits more consistent (also sent as separate series). - Drop now unused enumeration of fine grained traps. v8: - Rebase onto v5.17-rc1. - Support interoperation with KVM, SME is disabled for KVM guests with minimal handling for cleaning up SME state when entering and leaving the guest. - Document and implement that signal handlers are invoked with ZA and streaming mode disabled. - Use the RDSVL instruction introduced in EAC2 of the architecture to obtain the streaming mode vector length during enumeration, ZA state loading/saving and in test programs. - Store a pointer to SVCR in fpsimd_last_state and use it in fpsimd_save() for interoperation with KVM. - Add a test case sme_trap_no_sm checking that we generate a SIGILL when using an instruction that requires streaming mode without enabling it. - Add basic ZA context form validation to testcases helper library. - Move signal tests over to validating streaming VL from ZA information. - Pulled in patch removing ARRAY_SIZE() so that kselftest builds cleanly and to avoid trivial conflicts. v7: - Rebase onto v5.16-rc3. - Reduce indentation when supporting custom triggers for signal tests as suggested by Catalin. - Change to specifying a width for all CPU features rather than adding single bit specific infrastructure. - Don't require zeroing of non-shared SVE state during syscalls. v6: - Rebase onto v5.16-rc1. - Return to disabling TIF_SVE on kernel entry even if we have SME state, this avoids the need for KVM to handle the case where TIF_SVE is set on guest entry. - Add syscall-abi.h to SME updates to syscall-abi, mistakenly omitted from commit. v5: - Rebase onto currently merged SVE and kselftest patches. - Add support for the FA64 option, introduced in the recently published EAC1 update to the specification. - Pull in test program for the syscall ABI previously sent separately with some revisions and add coverage for the SME ABI. - Fix checking for options with 1 bit fields in ID_AA64SMFR0_EL1. - Minor fixes and clarifications to the ABI documentation. v4: - Rebase onto merged patches. - Remove an uneeded NULL check in vec_proc_do_default_vl(). - Include patch to factor out utility routines in kselftests written in assembler. - Specify -ffreestanding when building TPIDR2 test. v3: - Skip FFR rather than predicate registers in sve_flush_live(). - Don't assume a bool is all zeros in sve_flush_live() as per AAPCS. - Don't redundantly specify a zero index when clearing FFR. v2: - Fix several issues with !SME and !SVE configurations. - Preserve TPIDR2 when creating a new thread/process unless CLONE_SETTLS is set. - Report traps due to using features in an invalid mode as SIGILL. - Spell out streaming mode behaviour in SVE ABI documentation more directly. - Document TPIDR2 in the ABI document. - Use SMSTART and SMSTOP rather than read/modify/write sequences. - Rework logic for exiting streaming mode on syscall. - Don't needlessly initialise SVCR on access trap. - Always restore SME VL for userspace if SME traps are disabled. - Only yield to encourage preemption every 128 iterations in za-test, otherwise do a getpid(), and validate SVCR after syscall. - Leave streaming mode disabled except when reading the vector length in za-test, and disable ZA after detecting a mismatch. - Add SME support to vlset. - Clarifications and typo fixes in comments. - Move sme_alloc() forward declaration back a patch. [1] https://community.arm.com/developer/ip-products/processors/b/processors-ip-… Mark Brown (39): arm64: Define CPACR_EL1_FPEN similarly to other floating point controls arm64: Always use individual bits in CPACR floating point enables arm64: cpufeature: Always specify and use a field width for capabilities kselftest/arm64: Remove local ARRAY_SIZE() definitions arm64/sme: Provide ABI documentation for SME arm64/sme: System register and exception syndrome definitions arm64/sme: Manually encode SME instructions arm64/sme: Early CPU setup for SME arm64/sme: Basic enumeration support arm64/sme: Identify supported SME vector lengths at boot arm64/sme: Implement sysctl to set the default vector length arm64/sme: Implement vector length configuration prctl()s arm64/sme: Implement support for TPIDR2 arm64/sme: Implement SVCR context switching arm64/sme: Implement streaming SVE context switching arm64/sme: Implement ZA context switching arm64/sme: Implement traps and syscall handling for SME arm64/sme: Disable ZA and streaming mode when handling signals arm64/sme: Implement streaming SVE signal handling arm64/sme: Implement ZA signal handling arm64/sme: Implement ptrace support for streaming mode SVE registers arm64/sme: Add ptrace support for ZA arm64/sme: Disable streaming mode and ZA when flushing CPU state arm64/sme: Save and restore streaming mode over EFI runtime calls KVM: arm64: Hide SME system registers from guests KVM: arm64: Trap SME usage in guest KVM: arm64: Handle SME host state when running guests arm64/sme: Provide Kconfig for SME kselftest/arm64: sme: Add streaming SME support to vlset kselftest/arm64: Add tests for TPIDR2 kselftest/arm64: Extend vector configuration API tests to cover SME kselftest/arm64: sme: Provide streaming mode SVE stress test kselftest/arm64: signal: Allow tests to be incompatible with features kselftest/arm64: signal: Handle ZA signal context in core code kselftest/arm64: Add stress test for SME ZA context switching kselftest/arm64: signal: Add SME signal handling tests kselftest/arm64: Add streaming SVE to SVE ptrace tests kselftest/arm64: Add coverage for the ZA ptrace interface kselftest/arm64: Add SME support to syscall ABI test Documentation/arm64/elf_hwcaps.rst | 33 + Documentation/arm64/index.rst | 1 + Documentation/arm64/sme.rst | 432 +++++++++++++ Documentation/arm64/sve.rst | 70 ++- arch/arm64/Kconfig | 11 + arch/arm64/include/asm/cpu.h | 4 + arch/arm64/include/asm/cpufeature.h | 25 + arch/arm64/include/asm/el2_setup.h | 64 +- arch/arm64/include/asm/esr.h | 13 +- arch/arm64/include/asm/exception.h | 1 + arch/arm64/include/asm/fpsimd.h | 110 +++- arch/arm64/include/asm/fpsimdmacros.h | 86 +++ arch/arm64/include/asm/hwcap.h | 8 + arch/arm64/include/asm/kvm_arm.h | 5 +- arch/arm64/include/asm/kvm_host.h | 4 + arch/arm64/include/asm/processor.h | 18 +- arch/arm64/include/asm/sysreg.h | 67 +- arch/arm64/include/asm/thread_info.h | 2 + arch/arm64/include/uapi/asm/hwcap.h | 8 + arch/arm64/include/uapi/asm/ptrace.h | 69 ++- arch/arm64/include/uapi/asm/sigcontext.h | 55 +- arch/arm64/kernel/cpufeature.c | 273 ++++++-- arch/arm64/kernel/cpuinfo.c | 13 + arch/arm64/kernel/entry-common.c | 11 + arch/arm64/kernel/entry-fpsimd.S | 36 ++ arch/arm64/kernel/fpsimd.c | 585 ++++++++++++++++-- arch/arm64/kernel/process.c | 28 +- arch/arm64/kernel/ptrace.c | 356 +++++++++-- arch/arm64/kernel/signal.c | 194 +++++- arch/arm64/kernel/syscall.c | 34 +- arch/arm64/kernel/traps.c | 1 + arch/arm64/kvm/fpsimd.c | 43 +- arch/arm64/kvm/hyp/include/hyp/switch.h | 4 +- arch/arm64/kvm/hyp/nvhe/switch.c | 30 + arch/arm64/kvm/hyp/vhe/switch.c | 15 +- arch/arm64/kvm/sys_regs.c | 9 +- arch/arm64/tools/cpucaps | 2 + include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 9 + kernel/sys.c | 12 + tools/testing/selftests/arm64/abi/.gitignore | 1 + tools/testing/selftests/arm64/abi/Makefile | 9 +- .../selftests/arm64/abi/syscall-abi-asm.S | 69 ++- .../testing/selftests/arm64/abi/syscall-abi.c | 205 +++++- .../testing/selftests/arm64/abi/syscall-abi.h | 15 + tools/testing/selftests/arm64/abi/tpidr2.c | 298 +++++++++ tools/testing/selftests/arm64/fp/.gitignore | 4 + tools/testing/selftests/arm64/fp/Makefile | 12 +- tools/testing/selftests/arm64/fp/rdvl-sme.c | 14 + tools/testing/selftests/arm64/fp/rdvl.S | 8 + tools/testing/selftests/arm64/fp/rdvl.h | 1 + tools/testing/selftests/arm64/fp/ssve-stress | 59 ++ tools/testing/selftests/arm64/fp/sve-ptrace.c | 13 +- tools/testing/selftests/arm64/fp/sve-test.S | 30 + tools/testing/selftests/arm64/fp/vec-syscfg.c | 10 + tools/testing/selftests/arm64/fp/vlset.c | 10 +- tools/testing/selftests/arm64/fp/za-ptrace.c | 354 +++++++++++ tools/testing/selftests/arm64/fp/za-stress | 59 ++ tools/testing/selftests/arm64/fp/za-test.S | 426 +++++++++++++ .../testing/selftests/arm64/signal/.gitignore | 2 + .../selftests/arm64/signal/test_signals.h | 5 + .../arm64/signal/test_signals_utils.c | 40 +- .../arm64/signal/test_signals_utils.h | 2 + .../testcases/fake_sigreturn_sme_change_vl.c | 92 +++ .../arm64/signal/testcases/sme_trap_no_sm.c | 38 ++ .../signal/testcases/sme_trap_non_streaming.c | 45 ++ .../arm64/signal/testcases/sme_trap_za.c | 36 ++ .../selftests/arm64/signal/testcases/sme_vl.c | 68 ++ .../arm64/signal/testcases/ssve_regs.c | 129 ++++ .../arm64/signal/testcases/testcases.c | 36 ++ .../arm64/signal/testcases/testcases.h | 3 +- 71 files changed, 4585 insertions(+), 251 deletions(-) create mode 100644 Documentation/arm64/sme.rst create mode 100644 tools/testing/selftests/arm64/abi/syscall-abi.h create mode 100644 tools/testing/selftests/arm64/abi/tpidr2.c create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sme.c create mode 100644 tools/testing/selftests/arm64/fp/ssve-stress create mode 100644 tools/testing/selftests/arm64/fp/za-ptrace.c create mode 100644 tools/testing/selftests/arm64/fp/za-stress create mode 100644 tools/testing/selftests/arm64/fp/za-test.S create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_no_sm.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_non_streaming.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_za.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/ssve_regs.c base-commit: e783362eb54cd99b2cac8b3a9aeac942e6f6ac07 -- 2.30.2

3 years, 5 months

1
39
0 0

[PATCH v9 00/40] arm64/sme: Initial support for the Scalable Matrix Extension

by Mark Brown

This series provides initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. A more detailed overview can be found in [1]. For the kernel SME can be thought of as a series of features which are intended to be used together by applications but operate mostly orthogonally: - The ZA matrix register. - Streaming mode, in which ZA can be accessed and a subset of SVE features are available. - A second vector length, used for streaming mode SVE and ZA and controlled using a similar interface to that for SVE. - TPIDR2, a new userspace controllable system register intended for use by the C library for storing context related to the ZA ABI. A substantial part of the series is dedicated to refactoring the existing SVE support so that we don't need to duplicate code for handling vector lengths and the SVE registers, this involves creating an array of vector types and making the users take the vector type as a parameter. I'm not 100% happy with this but wasn't able to come up with anything better, duplicating code definitely felt like a bad idea so this felt like the least bad thing. If this approach makes sense to people it might make sense to split this off into a separate series and/or merge it while the rest is pending review to try to make things a little more digestable, the series is very large so it'd probably make things easier to digest if some of the preparatory refactoring could be merged before the rest is ready. One feature of the architecture of particular note is that switching to and from streaming mode may change the size of and invalidate the contents of the SVE registers, and when in streaming mode the FFR is not accessible. This complicates aspects of the ABI like signal handling and ptrace. This initial implementation is mainly intended to get the ABI in place, there are several areas which will be worked on going forwards - some of these will be blockers, others could be handled in followup serieses: - SME is currently not supported for KVM guests, this will be done as a followup series. A host system can use SME and run KVM guests but SME is not available in the guests. - The KVM host support is done in a very simplistic way, were anyone to attempt to use it in production there would be performance impacts on hosts with SME support. As part of this we also add enumeration of fine grained traps. - There is not currently ptrace or signal support TPIDR2, this will be done as a followup series. - No support is currently provided for scheduler control of SME or SME applications, given the size of the SME register state the context switch overhead may be noticable so this may be needed especially for real time applications. Similar concerns already exist for larger SVE vector lengths but are amplified for SME, particularly as the vector length increases. - There has been no work on optimising the performance of anything the kernel does. It is not expected that any systems will be encountered that support SME but not SVE, SME is an ARMv9 feature and SVE is mandatory for ARMv9. The code attempts to handle any such systems that are encountered but this hasn't been tested extensively. v9: - Remove defensive programming around IS_ENABLED() and FGT in KVM code. - Fix naming of TPIDR2 FGT register bit. - Add patches making handling of floating point register bits more consistent (also sent as separate series). - Drop now unused enumeration of fine grained traps. v8: - Rebase onto v5.17-rc1. - Support interoperation with KVM, SME is disabled for KVM guests with minimal handling for cleaning up SME state when entering and leaving the guest. - Document and implement that signal handlers are invoked with ZA and streaming mode disabled. - Use the RDSVL instruction introduced in EAC2 of the architecture to obtain the streaming mode vector length during enumeration, ZA state loading/saving and in test programs. - Store a pointer to SVCR in fpsimd_last_state and use it in fpsimd_save() for interoperation with KVM. - Add a test case sme_trap_no_sm checking that we generate a SIGILL when using an instruction that requires streaming mode without enabling it. - Add basic ZA context form validation to testcases helper library. - Move signal tests over to validating streaming VL from ZA information. - Pulled in patch removing ARRAY_SIZE() so that kselftest builds cleanly and to avoid trivial conflicts. v7: - Rebase onto v5.16-rc3. - Reduce indentation when supporting custom triggers for signal tests as suggested by Catalin. - Change to specifying a width for all CPU features rather than adding single bit specific infrastructure. - Don't require zeroing of non-shared SVE state during syscalls. v6: - Rebase onto v5.16-rc1. - Return to disabling TIF_SVE on kernel entry even if we have SME state, this avoids the need for KVM to handle the case where TIF_SVE is set on guest entry. - Add syscall-abi.h to SME updates to syscall-abi, mistakenly omitted from commit. v5: - Rebase onto currently merged SVE and kselftest patches. - Add support for the FA64 option, introduced in the recently published EAC1 update to the specification. - Pull in test program for the syscall ABI previously sent separately with some revisions and add coverage for the SME ABI. - Fix checking for options with 1 bit fields in ID_AA64SMFR0_EL1. - Minor fixes and clarifications to the ABI documentation. v4: - Rebase onto merged patches. - Remove an uneeded NULL check in vec_proc_do_default_vl(). - Include patch to factor out utility routines in kselftests written in assembler. - Specify -ffreestanding when building TPIDR2 test. v3: - Skip FFR rather than predicate registers in sve_flush_live(). - Don't assume a bool is all zeros in sve_flush_live() as per AAPCS. - Don't redundantly specify a zero index when clearing FFR. v2: - Fix several issues with !SME and !SVE configurations. - Preserve TPIDR2 when creating a new thread/process unless CLONE_SETTLS is set. - Report traps due to using features in an invalid mode as SIGILL. - Spell out streaming mode behaviour in SVE ABI documentation more directly. - Document TPIDR2 in the ABI document. - Use SMSTART and SMSTOP rather than read/modify/write sequences. - Rework logic for exiting streaming mode on syscall. - Don't needlessly initialise SVCR on access trap. - Always restore SME VL for userspace if SME traps are disabled. - Only yield to encourage preemption every 128 iterations in za-test, otherwise do a getpid(), and validate SVCR after syscall. - Leave streaming mode disabled except when reading the vector length in za-test, and disable ZA after detecting a mismatch. - Add SME support to vlset. - Clarifications and typo fixes in comments. - Move sme_alloc() forward declaration back a patch. [1] https://community.arm.com/developer/ip-products/processors/b/processors-ip-… Mark Brown (40): arm64: Define CPACR_EL1_FPEN similarly to other floating point controls arm64: Always use individual bits in CPACR floating point enables arm64: cpufeature: Always specify and use a field width for capabilities kselftest/arm64: Remove local ARRAY_SIZE() definitions arm64/sme: Provide ABI documentation for SME arm64/sme: System register and exception syndrome definitions arm64/sme: Manually encode SME instructions arm64/sme: Early CPU setup for SME arm64/sme: Basic enumeration support arm64/sme: Identify supported SME vector lengths at boot arm64/sme: Implement sysctl to set the default vector length arm64/sme: Implement vector length configuration prctl()s arm64/sme: Implement support for TPIDR2 arm64/sme: Implement SVCR context switching arm64/sme: Implement streaming SVE context switching arm64/sme: Implement ZA context switching arm64/sme: Implement traps and syscall handling for SME arm64/sme: Disable ZA and streaming mode when handling signals arm64/sme: Implement streaming SVE signal handling arm64/sme: Implement ZA signal handling arm64/sme: Implement ptrace support for streaming mode SVE registers arm64/sme: Add ptrace support for ZA arm64/sme: Disable streaming mode and ZA when flushing CPU state arm64/sme: Save and restore streaming mode over EFI runtime calls KVM: arm64: Hide SME system registers from guests KVM: arm64: Trap SME usage in guest KVM: arm64: Handle SME host state when running guests arm64/sme: Provide Kconfig for SME kselftest/arm64: sme: Add streaming SME support to vlset kselftest/arm64: Add tests for TPIDR2 kselftest/arm64: Extend vector configuration API tests to cover SME kselftest/arm64: sme: Provide streaming mode SVE stress test kselftest/arm64: signal: Allow tests to be incompatible with features kselftest/arm64: signal: Handle ZA signal context in core code kselftest/arm64: Add stress test for SME ZA context switching kselftest/arm64: signal: Add SME signal handling tests kselftest/arm64: Add streaming SVE to SVE ptrace tests kselftest/arm64: Add coverage for the ZA ptrace interface kselftest/arm64: Add SME support to syscall ABI test squqsh traps Documentation/arm64/elf_hwcaps.rst | 33 + Documentation/arm64/index.rst | 1 + Documentation/arm64/sme.rst | 432 +++++++++++++ Documentation/arm64/sve.rst | 70 ++- arch/arm64/Kconfig | 11 + arch/arm64/include/asm/cpu.h | 4 + arch/arm64/include/asm/cpufeature.h | 25 + arch/arm64/include/asm/el2_setup.h | 64 +- arch/arm64/include/asm/esr.h | 13 +- arch/arm64/include/asm/exception.h | 1 + arch/arm64/include/asm/fpsimd.h | 110 +++- arch/arm64/include/asm/fpsimdmacros.h | 86 +++ arch/arm64/include/asm/hwcap.h | 8 + arch/arm64/include/asm/kvm_arm.h | 5 +- arch/arm64/include/asm/kvm_host.h | 4 + arch/arm64/include/asm/processor.h | 18 +- arch/arm64/include/asm/sysreg.h | 67 +- arch/arm64/include/asm/thread_info.h | 2 + arch/arm64/include/uapi/asm/hwcap.h | 8 + arch/arm64/include/uapi/asm/ptrace.h | 69 ++- arch/arm64/include/uapi/asm/sigcontext.h | 55 +- arch/arm64/kernel/cpufeature.c | 273 ++++++-- arch/arm64/kernel/cpuinfo.c | 13 + arch/arm64/kernel/entry-common.c | 11 + arch/arm64/kernel/entry-fpsimd.S | 36 ++ arch/arm64/kernel/fpsimd.c | 585 ++++++++++++++++-- arch/arm64/kernel/process.c | 28 +- arch/arm64/kernel/ptrace.c | 356 +++++++++-- arch/arm64/kernel/signal.c | 194 +++++- arch/arm64/kernel/syscall.c | 34 +- arch/arm64/kernel/traps.c | 1 + arch/arm64/kvm/fpsimd.c | 43 +- arch/arm64/kvm/hyp/include/hyp/switch.h | 4 +- arch/arm64/kvm/hyp/nvhe/switch.c | 30 + arch/arm64/kvm/hyp/vhe/switch.c | 15 +- arch/arm64/kvm/sys_regs.c | 9 +- arch/arm64/tools/cpucaps | 2 + include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 9 + kernel/sys.c | 12 + tools/testing/selftests/arm64/abi/.gitignore | 1 + tools/testing/selftests/arm64/abi/Makefile | 9 +- .../selftests/arm64/abi/syscall-abi-asm.S | 69 ++- .../testing/selftests/arm64/abi/syscall-abi.c | 205 +++++- .../testing/selftests/arm64/abi/syscall-abi.h | 15 + tools/testing/selftests/arm64/abi/tpidr2.c | 298 +++++++++ tools/testing/selftests/arm64/fp/.gitignore | 4 + tools/testing/selftests/arm64/fp/Makefile | 12 +- tools/testing/selftests/arm64/fp/rdvl-sme.c | 14 + tools/testing/selftests/arm64/fp/rdvl.S | 8 + tools/testing/selftests/arm64/fp/rdvl.h | 1 + tools/testing/selftests/arm64/fp/ssve-stress | 59 ++ tools/testing/selftests/arm64/fp/sve-ptrace.c | 13 +- tools/testing/selftests/arm64/fp/sve-test.S | 30 + tools/testing/selftests/arm64/fp/vec-syscfg.c | 10 + tools/testing/selftests/arm64/fp/vlset.c | 10 +- tools/testing/selftests/arm64/fp/za-ptrace.c | 354 +++++++++++ tools/testing/selftests/arm64/fp/za-stress | 59 ++ tools/testing/selftests/arm64/fp/za-test.S | 426 +++++++++++++ .../testing/selftests/arm64/signal/.gitignore | 2 + .../selftests/arm64/signal/test_signals.h | 5 + .../arm64/signal/test_signals_utils.c | 40 +- .../arm64/signal/test_signals_utils.h | 2 + .../testcases/fake_sigreturn_sme_change_vl.c | 92 +++ .../arm64/signal/testcases/sme_trap_no_sm.c | 38 ++ .../signal/testcases/sme_trap_non_streaming.c | 45 ++ .../arm64/signal/testcases/sme_trap_za.c | 36 ++ .../selftests/arm64/signal/testcases/sme_vl.c | 68 ++ .../arm64/signal/testcases/ssve_regs.c | 129 ++++ .../arm64/signal/testcases/testcases.c | 36 ++ .../arm64/signal/testcases/testcases.h | 3 +- 71 files changed, 4585 insertions(+), 251 deletions(-) create mode 100644 Documentation/arm64/sme.rst create mode 100644 tools/testing/selftests/arm64/abi/syscall-abi.h create mode 100644 tools/testing/selftests/arm64/abi/tpidr2.c create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sme.c create mode 100644 tools/testing/selftests/arm64/fp/ssve-stress create mode 100644 tools/testing/selftests/arm64/fp/za-ptrace.c create mode 100644 tools/testing/selftests/arm64/fp/za-stress create mode 100644 tools/testing/selftests/arm64/fp/za-test.S create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_no_sm.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_non_streaming.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_za.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/ssve_regs.c base-commit: e783362eb54cd99b2cac8b3a9aeac942e6f6ac07 -- 2.30.2

3 years, 5 months

1
41
0 0

[PATCH v2] kselftest: alsa: Add test case for writing invalid values

by Mark Brown

Attempt to write various invalid values for control types we know about and check that something sensible happens. The ABI isn't quite as clearly defined as one might like, rather than generating an error when an invalid value is written many devices will silently rewrite the value into one that is valid for the control. The exact value chosen is not predictable so in the case the write succeeds we just check that the value we read back is one that is valid for the control. Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- v2: - Fix a couple of _integer()/_integer64() confusions. tools/testing/selftests/alsa/mixer-test.c | 222 +++++++++++++++++++++- 1 file changed, 221 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c index 17f158d7a767..0e88f4f3d802 100644 --- a/tools/testing/selftests/alsa/mixer-test.c +++ b/tools/testing/selftests/alsa/mixer-test.c @@ -13,6 +13,7 @@ #include <stdio.h> #include <stdlib.h> #include <stdbool.h> +#include <limits.h> #include <string.h> #include <getopt.h> #include <stdarg.h> @@ -26,7 +27,7 @@ #include "../kselftest.h" -#define TESTS_PER_CONTROL 3 +#define TESTS_PER_CONTROL 4 struct card_data { snd_ctl_t *handle; @@ -679,6 +680,224 @@ void test_ctl_write_valid(struct ctl_data *ctl) ctl->card->card, ctl->elem); } +bool test_ctl_write_invalid_value(struct ctl_data *ctl, + snd_ctl_elem_value_t *val) +{ + int err; + long val_read; + + /* Ideally this will fail... */ + err = snd_ctl_elem_write(ctl->card->handle, val); + if (err < 0) + return false; + + /* ...but some devices will clamp to an in range value */ + err = snd_ctl_elem_read(ctl->card->handle, val); + if (err < 0) { + ksft_print_msg("%s failed to read: %s\n", + ctl->name, snd_strerror(err)); + return true; + } + + return !ctl_value_valid(ctl, val); +} + +bool test_ctl_write_invalid_boolean(struct ctl_data *ctl) +{ + int err, i; + long val_read; + bool fail = false; + snd_ctl_elem_value_t *val; + snd_ctl_elem_value_alloca(&val); + + for (i = 0; i < snd_ctl_elem_info_get_count(ctl->info); i++) { + snd_ctl_elem_value_copy(val, ctl->def_val); + snd_ctl_elem_value_set_boolean(val, i, 2); + + if (test_ctl_write_invalid_value(ctl, val)) + fail = true; + } + + return !fail; +} + +bool test_ctl_write_invalid_integer(struct ctl_data *ctl) +{ + int i; + bool fail = false; + snd_ctl_elem_value_t *val; + snd_ctl_elem_value_alloca(&val); + + for (i = 0; i < snd_ctl_elem_info_get_count(ctl->info); i++) { + if (snd_ctl_elem_info_get_min(ctl->info) != LONG_MIN) { + /* Just under range */ + snd_ctl_elem_value_copy(val, ctl->def_val); + snd_ctl_elem_value_set_integer(val, i, + snd_ctl_elem_info_get_min(ctl->info) - 1); + + if (test_ctl_write_invalid_value(ctl, val)) + fail = true; + + /* Minimum representable value */ + snd_ctl_elem_value_copy(val, ctl->def_val); + snd_ctl_elem_value_set_integer(val, i, LONG_MIN); + + if (test_ctl_write_invalid_value(ctl, val)) + fail = true; + } + + if (snd_ctl_elem_info_get_max(ctl->info) != LONG_MAX) { + /* Just over range */ + snd_ctl_elem_value_copy(val, ctl->def_val); + snd_ctl_elem_value_set_integer(val, i, + snd_ctl_elem_info_get_max(ctl->info) + 1); + + if (test_ctl_write_invalid_value(ctl, val)) + fail = true; + + /* Maximum representable value */ + snd_ctl_elem_value_copy(val, ctl->def_val); + snd_ctl_elem_value_set_integer(val, i, LONG_MAX); + + if (test_ctl_write_invalid_value(ctl, val)) + fail = true; + } + } + + return !fail; +} + +bool test_ctl_write_invalid_integer64(struct ctl_data *ctl) +{ + int i; + bool fail = false; + snd_ctl_elem_value_t *val; + snd_ctl_elem_value_alloca(&val); + + for (i = 0; i < snd_ctl_elem_info_get_count(ctl->info); i++) { + if (snd_ctl_elem_info_get_min64(ctl->info) != LLONG_MIN) { + /* Just under range */ + snd_ctl_elem_value_copy(val, ctl->def_val); + snd_ctl_elem_value_set_integer64(val, i, + snd_ctl_elem_info_get_min64(ctl->info) - 1); + + if (test_ctl_write_invalid_value(ctl, val)) + fail = true; + + /* Minimum representable value */ + snd_ctl_elem_value_copy(val, ctl->def_val); + snd_ctl_elem_value_set_integer64(val, i, LLONG_MIN); + + if (test_ctl_write_invalid_value(ctl, val)) + fail = true; + } + + if (snd_ctl_elem_info_get_max64(ctl->info) != LLONG_MAX) { + /* Just over range */ + snd_ctl_elem_value_copy(val, ctl->def_val); + snd_ctl_elem_value_set_integer64(val, i, + snd_ctl_elem_info_get_max64(ctl->info) + 1); + + if (test_ctl_write_invalid_value(ctl, val)) + fail = true; + + /* Maximum representable value */ + snd_ctl_elem_value_copy(val, ctl->def_val); + snd_ctl_elem_value_set_integer64(val, i, LLONG_MAX); + + if (test_ctl_write_invalid_value(ctl, val)) + fail = true; + } + } + + return !fail; +} + +bool test_ctl_write_invalid_enumerated(struct ctl_data *ctl) +{ + int err, i; + unsigned int val_read; + bool fail = false; + snd_ctl_elem_value_t *val; + snd_ctl_elem_value_alloca(&val); + + snd_ctl_elem_value_set_id(val, ctl->id); + + for (i = 0; i < snd_ctl_elem_info_get_count(ctl->info); i++) { + /* One beyond maximum */ + snd_ctl_elem_value_copy(val, ctl->def_val); + snd_ctl_elem_value_set_enumerated(val, i, + snd_ctl_elem_info_get_items(ctl->info)); + + if (test_ctl_write_invalid_value(ctl, val)) + fail = true; + + /* Maximum representable value */ + snd_ctl_elem_value_copy(val, ctl->def_val); + snd_ctl_elem_value_set_enumerated(val, i, UINT_MAX); + + if (test_ctl_write_invalid_value(ctl, val)) + fail = true; + + } + + return !fail; +} + + +void test_ctl_write_invalid(struct ctl_data *ctl) +{ + bool pass; + int err; + + /* If the control is turned off let's be polite */ + if (snd_ctl_elem_info_is_inactive(ctl->info)) { + ksft_print_msg("%s is inactive\n", ctl->name); + ksft_test_result_skip("write_invalid.%d.%d\n", + ctl->card->card, ctl->elem); + return; + } + + if (!snd_ctl_elem_info_is_writable(ctl->info)) { + ksft_print_msg("%s is not writeable\n", ctl->name); + ksft_test_result_skip("write_invalid.%d.%d\n", + ctl->card->card, ctl->elem); + return; + } + + switch (snd_ctl_elem_info_get_type(ctl->info)) { + case SND_CTL_ELEM_TYPE_BOOLEAN: + pass = test_ctl_write_invalid_boolean(ctl); + break; + + case SND_CTL_ELEM_TYPE_INTEGER: + pass = test_ctl_write_invalid_integer(ctl); + break; + + case SND_CTL_ELEM_TYPE_INTEGER64: + pass = test_ctl_write_invalid_integer64(ctl); + break; + + case SND_CTL_ELEM_TYPE_ENUMERATED: + pass = test_ctl_write_invalid_enumerated(ctl); + break; + + default: + /* No tests for this yet */ + ksft_test_result_skip("write_invalid.%d.%d\n", + ctl->card->card, ctl->elem); + return; + } + + /* Restore the default value to minimise disruption */ + err = write_and_verify(ctl, ctl->def_val, NULL); + if (err < 0) + pass = false; + + ksft_test_result(pass, "write_invalid.%d.%d\n", + ctl->card->card, ctl->elem); +} + int main(void) { struct ctl_data *ctl; @@ -697,6 +916,7 @@ int main(void) test_ctl_get_value(ctl); test_ctl_write_default(ctl); test_ctl_write_valid(ctl); + test_ctl_write_invalid(ctl); } ksft_exit_pass(); -- 2.30.2

3 years, 5 months

2
1
0 0

[PATCH v2] kselftest: kvm/arm64: Skip tests if we can't create a vgic-v3

by Mark Brown

The arch_timer and vgic_irq kselftests assume that they can create a vgic-v3, using the library function vgic_v3_setup() which aborts with a test failure if it is not possible to do so. Since vgic-v3 can only be instantiated on systems where the host has GICv3 this leads to false positives on older systems where that is not the case. Fix this by changing vgic_v3_setup() to return an error if the vgic can't be instantiated and have the callers skip if this happens. We could also exit flagging a skip in vgic_v3_setup() but this would prevent future test cases conditionally deciding which GIC to use or generally doing more complex output. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- v2: - The test for being able to create the GIC doesn't actually instantiate it, add a call doing so in that case. tools/testing/selftests/kvm/aarch64/arch_timer.c | 7 ++++++- tools/testing/selftests/kvm/aarch64/vgic_irq.c | 4 ++++ tools/testing/selftests/kvm/lib/aarch64/vgic.c | 5 ++++- 3 files changed, 14 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/aarch64/arch_timer.c b/tools/testing/selftests/kvm/aarch64/arch_timer.c index 9ad38bd360a4..791d38404652 100644 --- a/tools/testing/selftests/kvm/aarch64/arch_timer.c +++ b/tools/testing/selftests/kvm/aarch64/arch_timer.c @@ -366,6 +366,7 @@ static struct kvm_vm *test_vm_create(void) { struct kvm_vm *vm; unsigned int i; + int ret; int nr_vcpus = test_args.nr_vcpus; vm = vm_create_default_with_vcpus(nr_vcpus, 0, 0, guest_code, NULL); @@ -382,7 +383,11 @@ static struct kvm_vm *test_vm_create(void) ucall_init(vm, NULL); test_init_timer_irq(vm); - vgic_v3_setup(vm, nr_vcpus, 64, GICD_BASE_GPA, GICR_BASE_GPA); + ret = vgic_v3_setup(vm, nr_vcpus, 64, GICD_BASE_GPA, GICR_BASE_GPA); + if (ret < 0) { + pr_info("Failed to create vgic-v3, skipping\n"); + exit(KSFT_SKIP); + } /* Make all the test's cmdline args visible to the guest */ sync_global_to_guest(vm, test_args); diff --git a/tools/testing/selftests/kvm/aarch64/vgic_irq.c b/tools/testing/selftests/kvm/aarch64/vgic_irq.c index e6c7d7f8fbd1..b127a261fd29 100644 --- a/tools/testing/selftests/kvm/aarch64/vgic_irq.c +++ b/tools/testing/selftests/kvm/aarch64/vgic_irq.c @@ -761,6 +761,10 @@ static void test_vgic(uint32_t nr_irqs, bool level_sensitive, bool eoi_split) gic_fd = vgic_v3_setup(vm, 1, nr_irqs, GICD_BASE_GPA, GICR_BASE_GPA); + if (gic_fd < 0) { + pr_info("Failed to create vgic-v3, skipping\n"); + exit(KSFT_SKIP); + } vm_install_exception_handler(vm, VECTOR_IRQ_CURRENT, guest_irq_handlers[args.eoi_split][args.level_sensitive]); diff --git a/tools/testing/selftests/kvm/lib/aarch64/vgic.c b/tools/testing/selftests/kvm/lib/aarch64/vgic.c index b3a0fca0d780..4ea65e119bdd 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/vgic.c +++ b/tools/testing/selftests/kvm/lib/aarch64/vgic.c @@ -51,7 +51,10 @@ int vgic_v3_setup(struct kvm_vm *vm, unsigned int nr_vcpus, uint32_t nr_irqs, "Number of vCPUs requested (%u) doesn't match with the ones created for the VM (%u)\n", nr_vcpus, nr_vcpus_created); - /* Distributor setup */ + /* Distributor setup - test if it's possible then actually do it */ + gic_fd = kvm_create_device(vm, KVM_DEV_TYPE_ARM_VGIC_V3, true); + if (gic_fd != 0) + return -1; gic_fd = kvm_create_device(vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); kvm_device_access(gic_fd, KVM_DEV_ARM_VGIC_GRP_NR_IRQS, -- 2.30.2

3 years, 5 months

2
3
0 0

[PATCH] kselftest: kvm/arm64: Skip tests if we can't create a vgic-v3

by Mark Brown

The arch_timer and vgic_irq kselftests assume that they can create a vgic-v3, using the library function vgic_v3_setup() which aborts with a test failure if it is not possible to do so. Since vgic-v3 can only be instantiated on systems where the host has GICv3 this leads to false positives on older systems where that is not the case. Fix this by changing vgic_v3_setup() to return an error if the vgic can't be instantiated and have the callers skip if this happens. We could also exit flagging a skip in vgic_v3_setup() but this would prevent future test cases conditionally deciding which GIC to use or generally doing more complex output. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/kvm/aarch64/arch_timer.c | 7 ++++++- tools/testing/selftests/kvm/aarch64/vgic_irq.c | 5 +++++ tools/testing/selftests/kvm/lib/aarch64/vgic.c | 4 +++- 3 files changed, 14 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/aarch64/arch_timer.c b/tools/testing/selftests/kvm/aarch64/arch_timer.c index 9ad38bd360a4..791d38404652 100644 --- a/tools/testing/selftests/kvm/aarch64/arch_timer.c +++ b/tools/testing/selftests/kvm/aarch64/arch_timer.c @@ -366,6 +366,7 @@ static struct kvm_vm *test_vm_create(void) { struct kvm_vm *vm; unsigned int i; + int ret; int nr_vcpus = test_args.nr_vcpus; vm = vm_create_default_with_vcpus(nr_vcpus, 0, 0, guest_code, NULL); @@ -382,7 +383,11 @@ static struct kvm_vm *test_vm_create(void) ucall_init(vm, NULL); test_init_timer_irq(vm); - vgic_v3_setup(vm, nr_vcpus, 64, GICD_BASE_GPA, GICR_BASE_GPA); + ret = vgic_v3_setup(vm, nr_vcpus, 64, GICD_BASE_GPA, GICR_BASE_GPA); + if (ret < 0) { + pr_info("Failed to create vgic-v3, skipping\n"); + exit(KSFT_SKIP); + } /* Make all the test's cmdline args visible to the guest */ sync_global_to_guest(vm, test_args); diff --git a/tools/testing/selftests/kvm/aarch64/vgic_irq.c b/tools/testing/selftests/kvm/aarch64/vgic_irq.c index e6c7d7f8fbd1..8c6b61b8e6aa 100644 --- a/tools/testing/selftests/kvm/aarch64/vgic_irq.c +++ b/tools/testing/selftests/kvm/aarch64/vgic_irq.c @@ -761,6 +761,11 @@ static void test_vgic(uint32_t nr_irqs, bool level_sensitive, bool eoi_split) gic_fd = vgic_v3_setup(vm, 1, nr_irqs, GICD_BASE_GPA, GICR_BASE_GPA); + if (gic_fd < 0) { + pr_info("Failed to create vgic-v3, skipping\n"); + exit(KSFT_SKIP); + } + vm_install_exception_handler(vm, VECTOR_IRQ_CURRENT, guest_irq_handlers[args.eoi_split][args.level_sensitive]); diff --git a/tools/testing/selftests/kvm/lib/aarch64/vgic.c b/tools/testing/selftests/kvm/lib/aarch64/vgic.c index b3a0fca0d780..647c18733e1b 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/vgic.c +++ b/tools/testing/selftests/kvm/lib/aarch64/vgic.c @@ -52,7 +52,9 @@ int vgic_v3_setup(struct kvm_vm *vm, unsigned int nr_vcpus, uint32_t nr_irqs, nr_vcpus, nr_vcpus_created); /* Distributor setup */ - gic_fd = kvm_create_device(vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); + gic_fd = kvm_create_device(vm, KVM_DEV_TYPE_ARM_VGIC_V3, true); + if (gic_fd == -1) + return -1; kvm_device_access(gic_fd, KVM_DEV_ARM_VGIC_GRP_NR_IRQS, 0, &nr_irqs, true); -- 2.30.2

3 years, 5 months

4
7
0 0

[PATCH] tools headers UAPI: remove stale lirc.h

by Sean Young

The lirc.h file is an old copy of lirc.h from the kernel sources. It is out of date, and the bpf lirc tests don't need a new copy anyway. As long as /usr/include/linux/lirc.h is from kernel v5.2 or newer, the tests will compile fine. Signed-off-by: Sean Young <sean(a)mess.org> --- tools/include/uapi/linux/lirc.h | 229 ------------------ .../selftests/bpf/test_lirc_mode2_user.c | 1 - 2 files changed, 230 deletions(-) delete mode 100644 tools/include/uapi/linux/lirc.h diff --git a/tools/include/uapi/linux/lirc.h b/tools/include/uapi/linux/lirc.h deleted file mode 100644 index 45fcbf99d72e..000000000000 --- a/tools/include/uapi/linux/lirc.h +++ /dev/null @@ -1,229 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * lirc.h - linux infrared remote control header file - * last modified 2010/07/13 by Jarod Wilson - */ - -#ifndef _LINUX_LIRC_H -#define _LINUX_LIRC_H - -#include <linux/types.h> -#include <linux/ioctl.h> - -#define PULSE_BIT 0x01000000 -#define PULSE_MASK 0x00FFFFFF - -#define LIRC_MODE2_SPACE 0x00000000 -#define LIRC_MODE2_PULSE 0x01000000 -#define LIRC_MODE2_FREQUENCY 0x02000000 -#define LIRC_MODE2_TIMEOUT 0x03000000 - -#define LIRC_VALUE_MASK 0x00FFFFFF -#define LIRC_MODE2_MASK 0xFF000000 - -#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) -#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) -#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) -#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) - -#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) -#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) - -#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) -#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) -#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) -#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) - -/* used heavily by lirc userspace */ -#define lirc_t int - -/*** lirc compatible hardware features ***/ - -#define LIRC_MODE2SEND(x) (x) -#define LIRC_SEND2MODE(x) (x) -#define LIRC_MODE2REC(x) ((x) << 16) -#define LIRC_REC2MODE(x) ((x) >> 16) - -#define LIRC_MODE_RAW 0x00000001 -#define LIRC_MODE_PULSE 0x00000002 -#define LIRC_MODE_MODE2 0x00000004 -#define LIRC_MODE_SCANCODE 0x00000008 -#define LIRC_MODE_LIRCCODE 0x00000010 - - -#define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) -#define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) -#define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) -#define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) - -#define LIRC_CAN_SEND_MASK 0x0000003f - -#define LIRC_CAN_SET_SEND_CARRIER 0x00000100 -#define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 -#define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 - -#define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) -#define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) -#define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) -#define LIRC_CAN_REC_SCANCODE LIRC_MODE2REC(LIRC_MODE_SCANCODE) -#define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) - -#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) - -#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) -#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) - -#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 -#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 -#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 -#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 -#define LIRC_CAN_SET_REC_FILTER 0x08000000 - -#define LIRC_CAN_MEASURE_CARRIER 0x02000000 -#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 - -#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) -#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) - -#define LIRC_CAN_NOTIFY_DECODE 0x01000000 - -/*** IOCTL commands for lirc driver ***/ - -#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) - -#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) -#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) -#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) - -#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) -#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) - -/* code length in bits, currently only for LIRC_MODE_LIRCCODE */ -#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) - -#define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) -#define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) -/* Note: these can reset the according pulse_width */ -#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) -#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) -#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) -#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) - -/* - * when a timeout != 0 is set the driver will send a - * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is - * never sent, timeout is disabled by default - */ -#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) - -/* 1 enables, 0 disables timeout reports in MODE2 */ -#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) - -/* - * if enabled from the next key press on the driver will send - * LIRC_MODE2_FREQUENCY packets - */ -#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) - -/* - * to set a range use LIRC_SET_REC_CARRIER_RANGE with the - * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound - */ -#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) - -#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) - -/* - * Return the recording timeout, which is either set by - * the ioctl LIRC_SET_REC_TIMEOUT or by the kernel after setting the protocols. - */ -#define LIRC_GET_REC_TIMEOUT _IOR('i', 0x00000024, __u32) - -/* - * struct lirc_scancode - decoded scancode with protocol for use with - * LIRC_MODE_SCANCODE - * - * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR - * was decoded. - * @flags: should be 0 for transmit. When receiving scancodes, - * LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set - * depending on the protocol - * @rc_proto: see enum rc_proto - * @keycode: the translated keycode. Set to 0 for transmit. - * @scancode: the scancode received or to be sent - */ -struct lirc_scancode { - __u64 timestamp; - __u16 flags; - __u16 rc_proto; - __u32 keycode; - __u64 scancode; -}; - -/* Set if the toggle bit of rc-5 or rc-6 is enabled */ -#define LIRC_SCANCODE_FLAG_TOGGLE 1 -/* Set if this is a nec or sanyo repeat */ -#define LIRC_SCANCODE_FLAG_REPEAT 2 - -/** - * enum rc_proto - the Remote Controller protocol - * - * @RC_PROTO_UNKNOWN: Protocol not known - * @RC_PROTO_OTHER: Protocol known but proprietary - * @RC_PROTO_RC5: Philips RC5 protocol - * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol - * @RC_PROTO_RC5_SZ: StreamZap variant of RC5 - * @RC_PROTO_JVC: JVC protocol - * @RC_PROTO_SONY12: Sony 12 bit protocol - * @RC_PROTO_SONY15: Sony 15 bit protocol - * @RC_PROTO_SONY20: Sony 20 bit protocol - * @RC_PROTO_NEC: NEC protocol - * @RC_PROTO_NECX: Extended NEC protocol - * @RC_PROTO_NEC32: NEC 32 bit protocol - * @RC_PROTO_SANYO: Sanyo protocol - * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard - * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse - * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol - * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol - * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol - * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol - * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol - * @RC_PROTO_SHARP: Sharp protocol - * @RC_PROTO_XMP: XMP protocol - * @RC_PROTO_CEC: CEC protocol - * @RC_PROTO_IMON: iMon Pad protocol - * @RC_PROTO_RCMM12: RC-MM protocol 12 bits - * @RC_PROTO_RCMM24: RC-MM protocol 24 bits - * @RC_PROTO_RCMM32: RC-MM protocol 32 bits - */ -enum rc_proto { - RC_PROTO_UNKNOWN = 0, - RC_PROTO_OTHER = 1, - RC_PROTO_RC5 = 2, - RC_PROTO_RC5X_20 = 3, - RC_PROTO_RC5_SZ = 4, - RC_PROTO_JVC = 5, - RC_PROTO_SONY12 = 6, - RC_PROTO_SONY15 = 7, - RC_PROTO_SONY20 = 8, - RC_PROTO_NEC = 9, - RC_PROTO_NECX = 10, - RC_PROTO_NEC32 = 11, - RC_PROTO_SANYO = 12, - RC_PROTO_MCIR2_KBD = 13, - RC_PROTO_MCIR2_MSE = 14, - RC_PROTO_RC6_0 = 15, - RC_PROTO_RC6_6A_20 = 16, - RC_PROTO_RC6_6A_24 = 17, - RC_PROTO_RC6_6A_32 = 18, - RC_PROTO_RC6_MCE = 19, - RC_PROTO_SHARP = 20, - RC_PROTO_XMP = 21, - RC_PROTO_CEC = 22, - RC_PROTO_IMON = 23, - RC_PROTO_RCMM12 = 24, - RC_PROTO_RCMM24 = 25, - RC_PROTO_RCMM32 = 26, -}; - -#endif diff --git a/tools/testing/selftests/bpf/test_lirc_mode2_user.c b/tools/testing/selftests/bpf/test_lirc_mode2_user.c index ebf68dce5504..2893e9f2f1e0 100644 --- a/tools/testing/selftests/bpf/test_lirc_mode2_user.c +++ b/tools/testing/selftests/bpf/test_lirc_mode2_user.c @@ -28,7 +28,6 @@ // 5. We can read keycode from same /dev/lirc device #include <linux/bpf.h> -#include <linux/lirc.h> #include <linux/input.h> #include <errno.h> #include <stdio.h> -- 2.34.1

3 years, 5 months

3
2
0 0

[PATCH v2] selftests: rtc: Increase test timeout so that all tests run

by Nícolas F. R. A. Prado

The timeout setting for the rtc kselftest is currently 90 seconds. This setting is used by the kselftest runner to stop running a test if it takes longer than the assigned value. However, two of the test cases inside rtc set alarms. These alarms are set to the next beginning of the minute, so each of these test cases may take up to, in the worst case, 60 seconds. In order to allow for all test cases in rtc to run, even in the worst case, when using the kselftest runner, the timeout value should be increased to at least 120. Set it to 180, so there's some additional slack. Correct operation can be tested by running the following command right after the start of a minute (low second count), and checking that all test cases run: ./run_kselftest.sh -c rtc Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- Changes in v2: - Expanded commit message to make the issue, and how to test the fix, clearer v1: https://lore.kernel.org/all/20220112165359.3206047-1-nfraprado@collabora.co… tools/testing/selftests/rtc/settings | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/rtc/settings b/tools/testing/selftests/rtc/settings index ba4d85f74cd6..a953c96aa16e 100644 --- a/tools/testing/selftests/rtc/settings +++ b/tools/testing/selftests/rtc/settings @@ -1 +1 @@ -timeout=90 +timeout=180 -- 2.34.1

3 years, 5 months

3
3
0 0

[PATCH] selftests: cpufreq: Write test output to stdout as well

by Nícolas F. R. A. Prado

Use 'tee' to send the test output to stdout in addition to the current output file. This makes the output easier to handle in automated test systems and is superior to only later dumping the output file contents to stdout, since this way the test output can be interleaved with other log messages, like from the kernel, so that chronology is preserved, making it easier to detect issues. Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- tools/testing/selftests/cpufreq/main.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/cpufreq/main.sh b/tools/testing/selftests/cpufreq/main.sh index 31f8c9a76c5f..60ce18ed0666 100755 --- a/tools/testing/selftests/cpufreq/main.sh +++ b/tools/testing/selftests/cpufreq/main.sh @@ -194,5 +194,5 @@ prerequisite # Run requested functions clear_dumps $OUTFILE -do_test >> $OUTFILE.txt +do_test | tee -a $OUTFILE.txt dmesg_dumps $OUTFILE -- 2.34.1

3 years, 5 months

3
2
0 0

[PATCH v2] kselftest: signal all child processes

by Li Zhijian

We have some many cases that will create child process as well, such as pidfd_wait. Previously, we will signal/kill the parent process when it is time out, but this signal will not be sent to its child process. In such case, if child process doesn't terminate itself, ksefltest framework will hang forever. below ps tree show the situation when ksefltest is blocking: root 1172 0.0 0.0 5996 2500 ? S 07:03 0:00 \_ /bin/bash /lkp/lkp/src/tests/kernel-selftests root 1216 0.0 0.0 4392 1976 ? S 07:03 0:00 \_ make run_tests -C pidfd root 1218 0.0 0.0 2396 1652 ? S 07:03 0:00 \_ /bin/sh -c BASE_DIR="/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests"; . /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/kselftest/runner.sh; if [ "X" != "X" ]; then per_test_logging=1; fi; run_many /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_fdinfo_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_open_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_poll_test /usr/src/perf_selftests-x86_64-rhel- 8. root 12491 0.0 0.0 2396 132 ? S 07:03 0:00 \_ /bin/sh -c BASE_DIR="/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests"; . /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/kselftest/runner.sh; if [ "X" != "X" ]; then per_test_logging=1; fi; run_many /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_fdinfo_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_open_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_poll_test /usr/src/perf_selftests-x86_64-r he root 12492 0.0 0.0 2396 132 ? S 07:03 0:00 \_ /bin/sh -c BASE_DIR="/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests"; . /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/kselftest/runner.sh; if [ "X" != "X" ]; then per_test_logging=1; fi; run_many /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_fdinfo_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_open_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_poll_test /usr/src/perf_selftests-x86_ 64 root 12493 0.0 0.0 2396 132 ? S 07:03 0:00 \_ /bin/sh -c BASE_DIR="/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests"; . /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/kselftest/runner.sh; if [ "X" != "X" ]; then per_test_logging=1; fi; run_many /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_fdinfo_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_open_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_poll_test /usr/src/perf_selftests- x8 root 12496 0.0 0.0 2396 132 ? S 07:03 0:00 \_ /bin/sh -c BASE_DIR="/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests"; . /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/kselftest/runner.sh; if [ "X" != "X" ]; then per_test_logging=1; fi; run_many /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_fdinfo_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_open_test /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/pidfd/pidfd_poll_test /usr/src/perf_selfte st root 12498 0.0 0.0 10564 6116 ? S 07:03 0:00 \_ perl /usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-519d81956ee277b4419c723adfb154603c2565ba/tools/testing/selftests/kselftest/prefix.pl root 12503 0.0 0.0 2452 112 ? T 07:03 0:00 ./pidfd_wait root 12621 0.0 0.0 2372 1600 ? SLs 07:04 0:00 /usr/sbin/watchdog root 19438 0.0 0.0 992 60 ? Ss 07:39 0:00 /lkp/lkp/src/bin/event/wakeup activate-monitor Here we group all its child processes so that kill() can signal all of them in timeout. Suggested-by: yang xu <xuyang2018.jy(a)cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian(a)cn.fujitsu.com> Acked-by: Christian Brauner <christian.brauner(a)ubuntu.com> --- V2: add acked tag --- tools/testing/selftests/kselftest_harness.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index ae0f0f33b2a6..c7251396e7ee 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -875,7 +875,8 @@ static void __timeout_handler(int sig, siginfo_t *info, void *ucontext) } t->timed_out = true; - kill(t->pid, SIGKILL); + // signal process group + kill(-(t->pid), SIGKILL); } void __wait_for_test(struct __test_metadata *t) @@ -985,6 +986,7 @@ void __run_test(struct __fixture_metadata *f, ksft_print_msg("ERROR SPAWNING TEST CHILD\n"); t->passed = 0; } else if (t->pid == 0) { + setpgrp(); t->fn(t, variant); if (t->skip) _exit(255); -- 2.33.0

3 years, 5 months

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror