- Linux-kselftest-mirror - lists.linaro.org

[PATCH v6 net-next 7/9] net: dsa: mv88e6xxx: mac-auth/MAB implementation

by Hans Schultz

From: "Hans J. Schultz" <netdev(a)kapio-technology.com> This implementation for the Marvell mv88e6xxx chip series, is based on handling ATU miss violations occurring when packets ingress on a port that is locked. The mac address triggering the ATU miss violation will be added to the ATU with a zero-DPV, and is then communicated through switchdev to the bridge module, which adds a fdb entry with the fdb locked flag set. The entry is kept according to the bridges ageing time, thus simulating a dynamic entry. Additionally the driver will set the sticky and masked flags, as the driver does not support roaming and forwarding from any port to a locked entry. As this is essentially a form of CPU based learning, the amount of locked entries will be limited by a hardcoded value for now, so as to prevent DOS attacks. Signed-off-by: Hans J. Schultz <netdev(a)kapio-technology.com> --- drivers/net/dsa/mv88e6xxx/Makefile | 1 + drivers/net/dsa/mv88e6xxx/chip.c | 76 +++++-- drivers/net/dsa/mv88e6xxx/chip.h | 19 ++ drivers/net/dsa/mv88e6xxx/global1.h | 1 + drivers/net/dsa/mv88e6xxx/global1_atu.c | 12 +- drivers/net/dsa/mv88e6xxx/port.c | 15 +- drivers/net/dsa/mv88e6xxx/port.h | 6 + drivers/net/dsa/mv88e6xxx/switchdev.c | 284 ++++++++++++++++++++++++ drivers/net/dsa/mv88e6xxx/switchdev.h | 37 +++ 9 files changed, 429 insertions(+), 22 deletions(-) create mode 100644 drivers/net/dsa/mv88e6xxx/switchdev.c create mode 100644 drivers/net/dsa/mv88e6xxx/switchdev.h diff --git a/drivers/net/dsa/mv88e6xxx/Makefile b/drivers/net/dsa/mv88e6xxx/Makefile index c8eca2b6f959..be903a983780 100644 --- a/drivers/net/dsa/mv88e6xxx/Makefile +++ b/drivers/net/dsa/mv88e6xxx/Makefile @@ -15,3 +15,4 @@ mv88e6xxx-objs += port_hidden.o mv88e6xxx-$(CONFIG_NET_DSA_MV88E6XXX_PTP) += ptp.o mv88e6xxx-objs += serdes.o mv88e6xxx-objs += smi.o +mv88e6xxx-objs += switchdev.o diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 352121cce77e..71843fe87f77 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -42,6 +42,7 @@ #include "ptp.h" #include "serdes.h" #include "smi.h" +#include "switchdev.h" static void assert_reg_lock(struct mv88e6xxx_chip *chip) { @@ -924,6 +925,13 @@ static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port, if (err) dev_err(chip->dev, "p%d: failed to force MAC link down\n", port); + else + if (mv88e6xxx_port_is_locked(chip, port)) { + err = mv88e6xxx_atu_locked_entry_flush(ds, port); + if (err) + dev_err(chip->dev, + "p%d: failed to clear locked entries\n", port); + } } static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port, @@ -1690,6 +1698,13 @@ static void mv88e6xxx_port_fast_age(struct dsa_switch *ds, int port) struct mv88e6xxx_chip *chip = ds->priv; int err; + if (mv88e6xxx_port_is_locked(chip, port)) { + err = mv88e6xxx_atu_locked_entry_flush(ds, port); + if (err) + dev_err(chip->ds->dev, "p%d: failed to clear locked entries: %d\n", + port, err); + } + mv88e6xxx_reg_lock(chip); err = mv88e6xxx_port_fast_age_fid(chip, port, 0); mv88e6xxx_reg_unlock(chip); @@ -1726,11 +1741,11 @@ static int mv88e6xxx_vtu_get(struct mv88e6xxx_chip *chip, u16 vid, return err; } -static int mv88e6xxx_vtu_walk(struct mv88e6xxx_chip *chip, - int (*cb)(struct mv88e6xxx_chip *chip, - const struct mv88e6xxx_vtu_entry *entry, - void *priv), - void *priv) +int mv88e6xxx_vtu_walk(struct mv88e6xxx_chip *chip, + int (*cb)(struct mv88e6xxx_chip *chip, + const struct mv88e6xxx_vtu_entry *entry, + void *priv), + void *priv) { struct mv88e6xxx_vtu_entry entry = { .vid = mv88e6xxx_max_vid(chip), @@ -2731,6 +2746,9 @@ static int mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port, if (fdb_flags) return 0; + if (mv88e6xxx_port_is_locked(chip, port)) + mv88e6xxx_atu_locked_entry_find_purge(ds, port, addr, vid); + mv88e6xxx_reg_lock(chip); err = mv88e6xxx_port_db_load_purge(chip, port, addr, vid, MV88E6XXX_G1_ATU_DATA_STATE_UC_STATIC); @@ -2744,16 +2762,21 @@ static int mv88e6xxx_port_fdb_del(struct dsa_switch *ds, int port, u16 fdb_flags, struct dsa_db db) { struct mv88e6xxx_chip *chip = ds->priv; - int err; + bool locked_found = false; + int err = 0; /* Ignore entries with flags set */ if (fdb_flags) return 0; - mv88e6xxx_reg_lock(chip); - err = mv88e6xxx_port_db_load_purge(chip, port, addr, vid, 0); - mv88e6xxx_reg_unlock(chip); + if (mv88e6xxx_port_is_locked(chip, port)) + locked_found = mv88e6xxx_atu_locked_entry_find_purge(ds, port, addr, vid); + if (!locked_found) { + mv88e6xxx_reg_lock(chip); + err = mv88e6xxx_port_db_load_purge(chip, port, addr, vid, 0); + mv88e6xxx_reg_unlock(chip); + } return err; } @@ -3849,11 +3872,18 @@ static int mv88e6xxx_setup(struct dsa_switch *ds) static int mv88e6xxx_port_setup(struct dsa_switch *ds, int port) { - return mv88e6xxx_setup_devlink_regions_port(ds, port); + int err; + + err = mv88e6xxx_setup_devlink_regions_port(ds, port); + if (!err) + return mv88e6xxx_init_violation_handler(ds, port); + + return err; } static void mv88e6xxx_port_teardown(struct dsa_switch *ds, int port) { + mv88e6xxx_teardown_violation_handler(ds, port); mv88e6xxx_teardown_devlink_regions_port(ds, port); } @@ -6528,7 +6558,7 @@ static int mv88e6xxx_port_pre_bridge_flags(struct dsa_switch *ds, int port, const struct mv88e6xxx_ops *ops; if (flags.mask & ~(BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | - BR_BCAST_FLOOD | BR_PORT_LOCKED)) + BR_BCAST_FLOOD | BR_PORT_LOCKED | BR_PORT_MAB)) return -EINVAL; ops = chip->info->ops; @@ -6549,13 +6579,13 @@ static int mv88e6xxx_port_bridge_flags(struct dsa_switch *ds, int port, struct mv88e6xxx_chip *chip = ds->priv; int err = -EOPNOTSUPP; - mv88e6xxx_reg_lock(chip); - if (flags.mask & BR_LEARNING) { bool learning = !!(flags.val & BR_LEARNING); u16 pav = learning ? (1 << port) : 0; + mv88e6xxx_reg_lock(chip); err = mv88e6xxx_port_set_assoc_vector(chip, port, pav); + mv88e6xxx_reg_unlock(chip); if (err) goto out; } @@ -6563,8 +6593,10 @@ static int mv88e6xxx_port_bridge_flags(struct dsa_switch *ds, int port, if (flags.mask & BR_FLOOD) { bool unicast = !!(flags.val & BR_FLOOD); + mv88e6xxx_reg_lock(chip); err = chip->info->ops->port_set_ucast_flood(chip, port, unicast); + mv88e6xxx_reg_unlock(chip); if (err) goto out; } @@ -6572,8 +6604,10 @@ static int mv88e6xxx_port_bridge_flags(struct dsa_switch *ds, int port, if (flags.mask & BR_MCAST_FLOOD) { bool multicast = !!(flags.val & BR_MCAST_FLOOD); + mv88e6xxx_reg_lock(chip); err = chip->info->ops->port_set_mcast_flood(chip, port, multicast); + mv88e6xxx_reg_unlock(chip); if (err) goto out; } @@ -6581,20 +6615,34 @@ static int mv88e6xxx_port_bridge_flags(struct dsa_switch *ds, int port, if (flags.mask & BR_BCAST_FLOOD) { bool broadcast = !!(flags.val & BR_BCAST_FLOOD); + mv88e6xxx_reg_lock(chip); err = mv88e6xxx_port_broadcast_sync(chip, port, broadcast); + mv88e6xxx_reg_unlock(chip); if (err) goto out; } + if (flags.mask & BR_PORT_MAB) { + chip->ports[port].mab = !!(flags.val & BR_PORT_MAB); + + if (!chip->ports[port].mab) + err = mv88e6xxx_atu_locked_entry_flush(ds, port); + else + err = 0; + } + if (flags.mask & BR_PORT_LOCKED) { bool locked = !!(flags.val & BR_PORT_LOCKED); + mv88e6xxx_reg_lock(chip); err = mv88e6xxx_port_set_lock(chip, port, locked); + mv88e6xxx_reg_unlock(chip); if (err) goto out; + + chip->ports[port].locked = locked; } out: - mv88e6xxx_reg_unlock(chip); return err; } diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index e693154cf803..180fbcf596fa 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -280,6 +280,16 @@ struct mv88e6xxx_port { unsigned int serdes_irq; char serdes_irq_name[64]; struct devlink_region *region; + + /* Locked port and MacAuth control flags */ + bool locked; + bool mab; + + /* List and maintenance of ATU locked entries */ + struct mutex ale_list_lock; + struct list_head ale_list; + struct delayed_work ale_work; + int ale_cnt; }; enum mv88e6xxx_region_id { @@ -399,6 +409,9 @@ struct mv88e6xxx_chip { int egress_dest_port; int ingress_dest_port; + /* Keep the register written age time for easy access */ + u8 age_time; + /* Per-port timestamping resources. */ struct mv88e6xxx_port_hwtstamp port_hwtstamp[DSA_MAX_PORTS]; @@ -802,6 +815,12 @@ static inline void mv88e6xxx_reg_unlock(struct mv88e6xxx_chip *chip) mutex_unlock(&chip->reg_lock); } +int mv88e6xxx_vtu_walk(struct mv88e6xxx_chip *chip, + int (*cb)(struct mv88e6xxx_chip *chip, + const struct mv88e6xxx_vtu_entry *entry, + void *priv), + void *priv); + int mv88e6xxx_fid_map(struct mv88e6xxx_chip *chip, unsigned long *bitmap); #endif /* _MV88E6XXX_CHIP_H */ diff --git a/drivers/net/dsa/mv88e6xxx/global1.h b/drivers/net/dsa/mv88e6xxx/global1.h index 65958b2a0d3a..503fbf216670 100644 --- a/drivers/net/dsa/mv88e6xxx/global1.h +++ b/drivers/net/dsa/mv88e6xxx/global1.h @@ -136,6 +136,7 @@ #define MV88E6XXX_G1_ATU_DATA_TRUNK 0x8000 #define MV88E6XXX_G1_ATU_DATA_TRUNK_ID_MASK 0x00f0 #define MV88E6XXX_G1_ATU_DATA_PORT_VECTOR_MASK 0x3ff0 +#define MV88E6XXX_G1_ATU_DATA_PORT_VECTOR_NO_EGRESS 0x0000 #define MV88E6XXX_G1_ATU_DATA_STATE_MASK 0x000f #define MV88E6XXX_G1_ATU_DATA_STATE_UC_UNUSED 0x0000 #define MV88E6XXX_G1_ATU_DATA_STATE_UC_AGE_1_OLDEST 0x0001 diff --git a/drivers/net/dsa/mv88e6xxx/global1_atu.c b/drivers/net/dsa/mv88e6xxx/global1_atu.c index d9dfa1159cde..67907cd00b87 100644 --- a/drivers/net/dsa/mv88e6xxx/global1_atu.c +++ b/drivers/net/dsa/mv88e6xxx/global1_atu.c @@ -12,6 +12,8 @@ #include "chip.h" #include "global1.h" +#include "port.h" +#include "switchdev.h" /* Offset 0x01: ATU FID Register */ @@ -54,6 +56,7 @@ int mv88e6xxx_g1_atu_set_age_time(struct mv88e6xxx_chip *chip, /* Round to nearest multiple of coeff */ age_time = (msecs + coeff / 2) / coeff; + chip->age_time = age_time; err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_ATU_CTL, &val); if (err) @@ -426,6 +429,8 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id) if (err) goto out; + mv88e6xxx_reg_unlock(chip); + spid = entry.state; if (val & MV88E6XXX_G1_ATU_OP_AGE_OUT_VIOLATION) { @@ -446,6 +451,12 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id) "ATU miss violation for %pM portvec %x spid %d\n", entry.mac, entry.portvec, spid); chip->ports[spid].atu_miss_violation++; + + if (fid && chip->ports[spid].mab) + err = mv88e6xxx_handle_violation(chip, spid, &entry, fid, + MV88E6XXX_G1_ATU_OP_MISS_VIOLATION); + if (err) + goto out; } if (val & MV88E6XXX_G1_ATU_OP_FULL_VIOLATION) { @@ -454,7 +465,6 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id) entry.mac, entry.portvec, spid); chip->ports[spid].atu_full_violation++; } - mv88e6xxx_reg_unlock(chip); return IRQ_HANDLED; diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c index 5c4195c635b0..67e457ce67ae 100644 --- a/drivers/net/dsa/mv88e6xxx/port.c +++ b/drivers/net/dsa/mv88e6xxx/port.c @@ -14,9 +14,11 @@ #include <linux/phylink.h> #include "chip.h" +#include "global1.h" #include "global2.h" #include "port.h" #include "serdes.h" +#include "switchdev.h" int mv88e6xxx_port_read(struct mv88e6xxx_chip *chip, int port, int reg, u16 *val) @@ -1240,13 +1242,12 @@ int mv88e6xxx_port_set_lock(struct mv88e6xxx_chip *chip, int port, if (err) return err; - err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_ASSOC_VECTOR, &reg); - if (err) - return err; - - reg &= ~MV88E6XXX_PORT_ASSOC_VECTOR_LOCKED_PORT; - if (locked) - reg |= MV88E6XXX_PORT_ASSOC_VECTOR_LOCKED_PORT; + reg = 0; + if (locked) { + reg = (1 << port); + reg |= MV88E6XXX_PORT_ASSOC_VECTOR_IGNORE_WRONG | + MV88E6XXX_PORT_ASSOC_VECTOR_LOCKED_PORT; + } return mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_ASSOC_VECTOR, reg); } diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h index cb04243f37c1..9475bc6e95a2 100644 --- a/drivers/net/dsa/mv88e6xxx/port.h +++ b/drivers/net/dsa/mv88e6xxx/port.h @@ -231,6 +231,7 @@ #define MV88E6XXX_PORT_ASSOC_VECTOR_LOCKED_PORT 0x2000 #define MV88E6XXX_PORT_ASSOC_VECTOR_IGNORE_WRONG 0x1000 #define MV88E6XXX_PORT_ASSOC_VECTOR_REFRESH_LOCKED 0x0800 +#define MV88E6XXX_PORT_ASSOC_VECTOR_PAV_MASK 0x07ff /* Offset 0x0C: Port ATU Control */ #define MV88E6XXX_PORT_ATU_CTL 0x0c @@ -375,6 +376,11 @@ int mv88e6xxx_port_set_pvid(struct mv88e6xxx_chip *chip, int port, u16 pvid); int mv88e6xxx_port_set_lock(struct mv88e6xxx_chip *chip, int port, bool locked); +static inline bool mv88e6xxx_port_is_locked(struct mv88e6xxx_chip *chip, int port) +{ + return chip->ports[port].locked; +} + int mv88e6xxx_port_set_8021q_mode(struct mv88e6xxx_chip *chip, int port, u16 mode); int mv88e6095_port_tag_remap(struct mv88e6xxx_chip *chip, int port); diff --git a/drivers/net/dsa/mv88e6xxx/switchdev.c b/drivers/net/dsa/mv88e6xxx/switchdev.c new file mode 100644 index 000000000000..327dbc0cfc3c --- /dev/null +++ b/drivers/net/dsa/mv88e6xxx/switchdev.c @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * switchdev.c + * + * Authors: + * Hans J. Schultz <hans.schultz(a)westermo.com> + * + */ + +#include <net/switchdev.h> +#include <linux/list.h> +#include "chip.h" +#include "global1.h" +#include "switchdev.h" + +static void mv88e6xxx_atu_locked_entry_purge(struct mv88e6xxx_atu_locked_entry *ale, + bool notify, bool take_nl_lock) +{ + struct switchdev_notifier_fdb_info info = { + .addr = ale->mac, + .vid = ale->vid, + .locked = true, + .offloaded = true, + }; + struct mv88e6xxx_atu_entry entry; + struct net_device *brport; + struct dsa_port *dp; + + entry.portvec = MV88E6XXX_G1_ATU_DATA_PORT_VECTOR_NO_EGRESS; + entry.state = MV88E6XXX_G1_ATU_DATA_STATE_UC_UNUSED; + entry.trunk = false; + ether_addr_copy(entry.mac, ale->mac); + + mv88e6xxx_reg_lock(ale->chip); + mv88e6xxx_g1_atu_loadpurge(ale->chip, ale->fid, &entry); + mv88e6xxx_reg_unlock(ale->chip); + + dp = dsa_to_port(ale->chip->ds, ale->port); + + if (notify) { + if (take_nl_lock) + rtnl_lock(); + brport = dsa_port_to_bridge_port(dp); + + if (brport) { + call_switchdev_notifiers(SWITCHDEV_FDB_DEL_TO_BRIDGE, + brport, &info.info, NULL); + } else { + dev_err(ale->chip->dev, "No bridge port for dsa port belonging to port %d\n", + ale->port); + } + if (take_nl_lock) + rtnl_unlock(); + } + + list_del(&ale->list); + kfree(ale); +} + +static void mv88e6xxx_atu_locked_entry_cleanup(struct work_struct *work) +{ + struct mv88e6xxx_port *p = container_of(work, struct mv88e6xxx_port, ale_work.work); + struct mv88e6xxx_atu_locked_entry *ale, *tmp; + + mutex_lock(&p->ale_list_lock); + list_for_each_entry_safe(ale, tmp, &p->ale_list, list) { + if (time_after(jiffies, ale->expires)) { + mv88e6xxx_atu_locked_entry_purge(ale, true, true); + p->ale_cnt--; + } + } + mutex_unlock(&p->ale_list_lock); + + mod_delayed_work(system_long_wq, &p->ale_work, msecs_to_jiffies(100)); +} + +static int mv88e6xxx_new_atu_locked_entry(struct mv88e6xxx_chip *chip, const unsigned char *addr, + int port, u16 fid, u16 vid, + struct mv88e6xxx_atu_locked_entry **alep) +{ + struct mv88e6xxx_atu_locked_entry *ale; + unsigned long now, age_time; + + ale = kmalloc(sizeof(*ale), GFP_ATOMIC); + if (!ale) + return -ENOMEM; + + ether_addr_copy(ale->mac, addr); + ale->chip = chip; + ale->port = port; + ale->fid = fid; + ale->vid = vid; + now = jiffies; + age_time = chip->age_time * chip->info->age_time_coeff; + ale->expires = now + age_time; + + *alep = ale; + return 0; +} + +struct mv88e6xxx_fid_search_ctx { + u16 fid_search; + u16 vid_found; +}; + +static int mv88e6xxx_find_vid_on_matching_fid(struct mv88e6xxx_chip *chip, + const struct mv88e6xxx_vtu_entry *entry, + void *priv) +{ + struct mv88e6xxx_fid_search_ctx *ctx = priv; + + if (ctx->fid_search == entry->fid) { + ctx->vid_found = entry->vid; + return 1; + } + + return 0; +} + +int mv88e6xxx_handle_violation(struct mv88e6xxx_chip *chip, int port, + struct mv88e6xxx_atu_entry *entry, + u16 fid, u16 type) +{ + struct switchdev_notifier_fdb_info info = { + .addr = entry->mac, + .vid = 0, + .is_local = true, + .locked = true, + .blackhole = true, + .offloaded = true, + }; + struct mv88e6xxx_atu_locked_entry *ale; + struct mv88e6xxx_fid_search_ctx ctx; + struct net_device *brport; + struct mv88e6xxx_port *p; + struct dsa_port *dp; + int err; + + if (!mv88e6xxx_is_invalid_port(chip, port)) + p = &chip->ports[port]; + else + return -ENODEV; + + ctx.fid_search = fid; + mv88e6xxx_reg_lock(chip); + err = mv88e6xxx_vtu_walk(chip, mv88e6xxx_find_vid_on_matching_fid, &ctx); + mv88e6xxx_reg_unlock(chip); + if (err < 0) + return err; + if (err == 1) + info.vid = ctx.vid_found; + else + return -ENODATA; + + switch (type) { + case MV88E6XXX_G1_ATU_OP_MISS_VIOLATION: + mutex_lock(&p->ale_list_lock); + if (p->ale_cnt >= ATU_LOCKED_ENTRIES_MAX) + goto exit; + mutex_unlock(&p->ale_list_lock); + entry->portvec = MV88E6XXX_G1_ATU_DATA_PORT_VECTOR_NO_EGRESS; + entry->state = MV88E6XXX_G1_ATU_DATA_STATE_UC_STATIC; + entry->trunk = false; + + mv88e6xxx_reg_lock(chip); + err = mv88e6xxx_g1_atu_loadpurge(chip, fid, entry); + if (err) + goto fail; + mv88e6xxx_reg_unlock(chip); + + dp = dsa_to_port(chip->ds, port); + err = mv88e6xxx_new_atu_locked_entry(chip, entry->mac, port, fid, + info.vid, &ale); + if (err) + return err; + + mutex_lock(&p->ale_list_lock); + list_add(&ale->list, &p->ale_list); + p->ale_cnt++; + mutex_unlock(&p->ale_list_lock); + + rtnl_lock(); + brport = dsa_port_to_bridge_port(dp); + if (!brport) { + rtnl_unlock(); + return -ENODEV; + } + err = call_switchdev_notifiers(SWITCHDEV_FDB_ADD_TO_BRIDGE, + brport, &info.info, NULL); + rtnl_unlock(); + break; + } + + return err; + +fail: + mv88e6xxx_reg_unlock(chip); + return err; + +exit: + mutex_unlock(&p->ale_list_lock); + return 0; +} + +bool mv88e6xxx_atu_locked_entry_find_purge(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct mv88e6xxx_atu_locked_entry *ale, *tmp; + struct mv88e6xxx_chip *chip = ds->priv; + struct mv88e6xxx_port *p; + bool found = false; + + p = &chip->ports[port]; + mutex_lock(&p->ale_list_lock); + list_for_each_entry_safe(ale, tmp, &p->ale_list, list) { + if (ether_addr_equal(ale->mac, addr) == 0) { + if (ale->vid == vid) { + mv88e6xxx_atu_locked_entry_purge(ale, false, false); + p->ale_cnt--; + found = true; + break; + } + } + } + mutex_unlock(&p->ale_list_lock); + return found; +} + +int mv88e6xxx_atu_locked_entry_flush(struct dsa_switch *ds, int port) +{ + struct mv88e6xxx_atu_locked_entry *ale, *tmp; + struct mv88e6xxx_chip *chip = ds->priv; + struct mv88e6xxx_port *p; + + if (!mv88e6xxx_is_invalid_port(chip, port)) + p = &chip->ports[port]; + else + return -ENODEV; + + mutex_lock(&p->ale_list_lock); + list_for_each_entry_safe(ale, tmp, &p->ale_list, list) { + mv88e6xxx_atu_locked_entry_purge(ale, true, false); + p->ale_cnt--; + } + mutex_unlock(&p->ale_list_lock); + + return 0; +} + +int mv88e6xxx_init_violation_handler(struct dsa_switch *ds, int port) +{ + struct mv88e6xxx_chip *chip = ds->priv; + struct mv88e6xxx_port *p; + + if (!mv88e6xxx_is_invalid_port(chip, port)) + p = &chip->ports[port]; + else + return -ENODEV; + + INIT_LIST_HEAD(&p->ale_list); + mutex_init(&p->ale_list_lock); + p->ale_cnt = 0; + INIT_DELAYED_WORK(&p->ale_work, mv88e6xxx_atu_locked_entry_cleanup); + mod_delayed_work(system_long_wq, &p->ale_work, msecs_to_jiffies(500)); + + return 0; +} + +int mv88e6xxx_teardown_violation_handler(struct dsa_switch *ds, int port) +{ + struct mv88e6xxx_chip *chip = ds->priv; + struct mv88e6xxx_port *p; + + if (!mv88e6xxx_is_invalid_port(chip, port)) + p = &chip->ports[port]; + else + return -ENODEV; + + cancel_delayed_work(&p->ale_work); + mv88e6xxx_atu_locked_entry_flush(ds, port); + mutex_destroy(&p->ale_list_lock); + + return 0; +} diff --git a/drivers/net/dsa/mv88e6xxx/switchdev.h b/drivers/net/dsa/mv88e6xxx/switchdev.h new file mode 100644 index 000000000000..df2005c36f47 --- /dev/null +++ b/drivers/net/dsa/mv88e6xxx/switchdev.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later + * + * switchdev.h + * + * Authors: + * Hans J. Schultz <hans.schultz(a)westermo.com> + * + */ + +#ifndef DRIVERS_NET_DSA_MV88E6XXX_SWITCHDEV_H_ +#define DRIVERS_NET_DSA_MV88E6XXX_SWITCHDEV_H_ + +#include <net/switchdev.h> +#include "chip.h" + +#define ATU_LOCKED_ENTRIES_MAX 64 + +struct mv88e6xxx_atu_locked_entry { + struct list_head list; + struct mv88e6xxx_chip *chip; + int port; + u8 mac[ETH_ALEN]; + u16 fid; + u16 vid; + unsigned long expires; +}; + +int mv88e6xxx_handle_violation(struct mv88e6xxx_chip *chip, int port, + struct mv88e6xxx_atu_entry *entry, + u16 fid, u16 type); +bool mv88e6xxx_atu_locked_entry_find_purge(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); +int mv88e6xxx_atu_locked_entry_flush(struct dsa_switch *ds, int port); +int mv88e6xxx_init_violation_handler(struct dsa_switch *ds, int port); +int mv88e6xxx_teardown_violation_handler(struct dsa_switch *ds, int port); + +#endif /* DRIVERS_NET_DSA_MV88E6XXX_SWITCHDEV_H_ */ -- 2.34.1

3 years, 2 months

1
0
0 0

[PATCH v6 net-next 6/9] net: dsa: mv88e6xxx: allow reading FID when handling ATU violations

by Hans Schultz

From: "Hans J. Schultz" <netdev(a)kapio-technology.com> The FID is needed to get hold of which VID was involved in a violation, thus the need to be able to read the FID. For convenience the function mv88e6xxx_g1_atu_op() has been used to read ATU violations, but the function invalidates reading the fid, so to both read ATU violations without zeroing the fid, and read the fid, functions have been added to ensure both are done correctly. Signed-off-by: Hans J. Schultz <netdev(a)kapio-technology.com> --- drivers/net/dsa/mv88e6xxx/global1_atu.c | 60 ++++++++++++++++++++++--- 1 file changed, 55 insertions(+), 5 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/global1_atu.c b/drivers/net/dsa/mv88e6xxx/global1_atu.c index 40bd67a5c8e9..d9dfa1159cde 100644 --- a/drivers/net/dsa/mv88e6xxx/global1_atu.c +++ b/drivers/net/dsa/mv88e6xxx/global1_atu.c @@ -114,6 +114,19 @@ static int mv88e6xxx_g1_atu_op_wait(struct mv88e6xxx_chip *chip) return mv88e6xxx_g1_wait_bit(chip, MV88E6XXX_G1_ATU_OP, bit, 0); } +static int mv88e6xxx_g1_read_atu_violation(struct mv88e6xxx_chip *chip) +{ + int err; + + err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_ATU_OP, + MV88E6XXX_G1_ATU_OP_BUSY | + MV88E6XXX_G1_ATU_OP_GET_CLR_VIOLATION); + if (err) + return err; + + return mv88e6xxx_g1_atu_op_wait(chip); +} + static int mv88e6xxx_g1_atu_op(struct mv88e6xxx_chip *chip, u16 fid, u16 op) { u16 val; @@ -159,6 +172,41 @@ int mv88e6xxx_g1_atu_get_next(struct mv88e6xxx_chip *chip, u16 fid) return mv88e6xxx_g1_atu_op(chip, fid, MV88E6XXX_G1_ATU_OP_GET_NEXT_DB); } +static int mv88e6xxx_g1_atu_fid_read(struct mv88e6xxx_chip *chip, u16 *fid) +{ + u16 val = 0, upper = 0, op = 0; + int err = -EOPNOTSUPP; + + if (mv88e6xxx_num_databases(chip) > 256) { + err = mv88e6xxx_g1_read(chip, MV88E6352_G1_ATU_FID, &val); + val &= 0xfff; + if (err) + return err; + } else { + err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_ATU_OP, &op); + if (err) + return err; + if (mv88e6xxx_num_databases(chip) > 64) { + /* ATU DBNum[7:4] are located in ATU Control 15:12 */ + err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_ATU_CTL, &upper); + if (err) + return err; + + upper = (upper >> 8) & 0x00f0; + } else if (mv88e6xxx_num_databases(chip) > 16) { + /* ATU DBNum[5:4] are located in ATU Operation 9:8 */ + + upper = (op >> 4) & 0x30; + } + /* ATU DBNum[3:0] are located in ATU Operation 3:0 */ + + val = (op & 0xf) | upper; + } + *fid = val; + + return err; +} + /* Offset 0x0C: ATU Data Register */ static int mv88e6xxx_g1_atu_data_read(struct mv88e6xxx_chip *chip, @@ -353,14 +401,12 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id) { struct mv88e6xxx_chip *chip = dev_id; struct mv88e6xxx_atu_entry entry; - int spid; - int err; - u16 val; + int err, spid; + u16 val, fid; mv88e6xxx_reg_lock(chip); - err = mv88e6xxx_g1_atu_op(chip, 0, - MV88E6XXX_G1_ATU_OP_GET_CLR_VIOLATION); + err = mv88e6xxx_g1_read_atu_violation(chip); if (err) goto out; @@ -368,6 +414,10 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id) if (err) goto out; + err = mv88e6xxx_g1_atu_fid_read(chip, &fid); + if (err) + goto out; + err = mv88e6xxx_g1_atu_data_read(chip, &entry); if (err) goto out; -- 2.34.1

3 years, 2 months

1
0
0 0

[RESEND PATCH] KVM: selftests: Update top-of-file comment in psci_test

by Oliver Upton

Fix the comment to accurately describe the test and recently added SYSTEM_SUSPEND test case. What was once psci_cpu_on_test was renamed and extended to squeeze in a test case for PSCI SYSTEM_SUSPEND. Nonetheless, the author of those changes (whoever they may be...) failed to update the file comment to reflect what had changed. Reported-by: Reiji Watanabe <reijiw(a)google.com> Signed-off-by: Oliver Upton <oliver.upton(a)linux.dev> --- Forgetting the name of the darned UAPI event. Tsk tsk. tools/testing/selftests/kvm/aarch64/psci_test.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/kvm/aarch64/psci_test.c b/tools/testing/selftests/kvm/aarch64/psci_test.c index f7621f6e938e..e0b9e81a3e09 100644 --- a/tools/testing/selftests/kvm/aarch64/psci_test.c +++ b/tools/testing/selftests/kvm/aarch64/psci_test.c @@ -1,12 +1,14 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * psci_cpu_on_test - Test that the observable state of a vCPU targeted by the - * CPU_ON PSCI call matches what the caller requested. + * psci_test - Tests relating to KVM's PSCI implementation. * * Copyright (c) 2021 Google LLC. * - * This is a regression test for a race between KVM servicing the PSCI call and - * userspace reading the vCPUs registers. + * This test includes: + * - A regression test for a race between KVM servicing the PSCI CPU_ON call + * and userspace reading the targeted vCPU's registers. + * - A test for KVM's handling of PSCI SYSTEM_SUSPEND and the associated + * KVM_SYSTEM_EVENT_SUSPEND UAPI. */ #define _GNU_SOURCE base-commit: 568035b01cfb107af8d2e4bd2fb9aea22cf5b868 -- 2.37.1.595.g718a3a8f04-goog

3 years, 2 months

2
1
0 0

Re: [PATCH -next v4 1/3] selftests/memory-hotplug: Add checking after online or offline

by zhaogongyi

Hi! > > On 27.09.22 05:28, Zhao Gongyi wrote: > > Add checking for online_memory_expect_success()/ > > offline_memory_expect_success()/offline_memory_expect_fail(), or the > > test would exit 0 although the functions return 1. > > > > Signed-off-by: Zhao Gongyi <zhaogongyi(a)huawei.com> > > --- > > .../selftests/memory-hotplug/mem-on-off-test.sh | 12 > +++++++++--- > > 1 file changed, 9 insertions(+), 3 deletions(-) > > > > diff --git a/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh > > b/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh > > index 46a97f318f58..1d87611a7d52 100755 > > --- a/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh > > +++ b/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh > > @@ -266,7 +266,9 @@ done > > # > > echo $error > > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_ONLINE/error > > for memory in `hotpluggable_offline_memory`; do > > - online_memory_expect_fail $memory > > + if ! online_memory_expect_fail $memory; then > > + retval=1 > > + fi > > done > > > > # > > @@ -274,7 +276,9 @@ done > > # > > echo 0 > > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_ONLINE/error > > for memory in `hotpluggable_offline_memory`; do > > - online_memory_expect_success $memory > > + if ! online_memory_expect_success $memory; then > > + retval=1 > > + fi > > done > > > > # > > @@ -283,7 +287,9 @@ done > > echo $error > > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_OFFLINE/error > > for memory in `hotpluggable_online_memory`; do > > if [ $((RANDOM % 100)) -lt $ratio ]; then > > - offline_memory_expect_fail $memory > > + if ! offline_memory_expect_fail $memory; then > > + retval=1 > > + fi > > fi > > > LGTM > > Reviewed-by: David Hildenbrand <david(a)redhat.com> > > > I am questioning the stability of the offlining test, though. > Offlining a random memory block can fail easily, because "->removable" is not > expressive: > > # tools/testing/selftests/memory-hotplug/mem-on-off-test.sh > Test scope: 2% hotplug memory > online all hot-pluggable memory in offline state: > SKIPPED - no hot-pluggable memory in offline state > offline 2% hot-pluggable memory in online state > trying to offline 2 out of 96 memory block(s): > online->offline memory0 > tools/testing/selftests/memory-hotplug/mem-on-off-test.sh: line 78: echo: > write error: Invalid argument offline_memory_expect_success 0: unexpected > fail > online->offline memory10 > online->offline memory11 > > > I guess this test will almost always fail nowadays. Offline some memory node maybe failed as expected, but the error message is a bit annoying. > > -- > Thanks, > > David / dhildenb

3 years, 2 months

2
1
0 0

[PATCH net-next,v3 00/15] add tc-testing qdisc test cases

by Zhengchao Shao

For this patchset, test cases of the qdisc modules are added to the tc-testing test suite. Last, thanks to Victor for testing and suggestion. After a test case is added locally, the test result is as follows: ./tdc.py -c atm ok 1 7628 - Create ATM with default setting ok 2 390a - Delete ATM with valid handle ok 3 32a0 - Show ATM class ok 4 6310 - Dump ATM stats ./tdc.py -c choke ok 1 8937 - Create CHOKE with default setting ok 2 48c0 - Create CHOKE with min packet setting ok 3 38c1 - Create CHOKE with max packet setting ok 4 234a - Create CHOKE with ecn setting ok 5 4380 - Create CHOKE with burst setting ok 6 48c7 - Delete CHOKE with valid handle ok 7 4398 - Replace CHOKE with min setting ok 8 0301 - Change CHOKE with limit setting ./tdc.py -c codel ok 1 983a - Create CODEL with default setting ok 2 38aa - Create CODEL with limit packet setting ok 3 9178 - Create CODEL with target setting ok 4 78d1 - Create CODEL with interval setting ok 5 238a - Create CODEL with ecn setting ok 6 939c - Create CODEL with ce_threshold setting ok 7 8380 - Delete CODEL with valid handle ok 8 289c - Replace CODEL with limit setting ok 9 0648 - Change CODEL with limit setting ./tdc.py -c etf ok 1 34ba - Create ETF with default setting ok 2 438f - Create ETF with delta nanos setting ok 3 9041 - Create ETF with deadline_mode setting ok 4 9a0c - Create ETF with skip_sock_check setting ok 5 2093 - Delete ETF with valid handle ./tdc.py -c fq ok 1 983b - Create FQ with default setting ok 2 38a1 - Create FQ with limit packet setting ok 3 0a18 - Create FQ with flow_limit setting ok 4 2390 - Create FQ with quantum setting ok 5 845b - Create FQ with initial_quantum setting ok 6 9398 - Create FQ with maxrate setting ok 7 342c - Create FQ with nopacing setting ok 8 6391 - Create FQ with refill_delay setting ok 9 238b - Create FQ with low_rate_threshold setting ok 10 7582 - Create FQ with orphan_mask setting ok 11 4894 - Create FQ with timer_slack setting ok 12 324c - Create FQ with ce_threshold setting ok 13 424a - Create FQ with horizon time setting ok 14 89e1 - Create FQ with horizon_cap setting ok 15 32e1 - Delete FQ with valid handle ok 16 49b0 - Replace FQ with limit setting ok 17 9478 - Change FQ with limit setting ./tdc.py -c gred ok 1 8942 - Create GRED with default setting ok 2 5783 - Create GRED with grio setting ok 3 8a09 - Create GRED with limit setting ok 4 48cb - Create GRED with ecn setting ok 5 763a - Change GRED setting ok 6 8309 - Show GRED class ./tdc.py -c hhf ok 1 4812 - Create HHF with default setting ok 2 8a92 - Create HHF with limit setting ok 3 3491 - Create HHF with quantum setting ok 4 ba04 - Create HHF with reset_timeout setting ok 5 4238 - Create HHF with admit_bytes setting ok 6 839f - Create HHF with evict_timeout setting ok 7 a044 - Create HHF with non_hh_weight setting ok 8 32f9 - Change HHF with limit setting ok 9 385e - Show HHF class ./tdc.py -c pfifo_fast ok 1 900c - Create pfifo_fast with default setting ok 2 7470 - Dump pfifo_fast stats ok 3 b974 - Replace pfifo_fast with different handle ok 4 3240 - Delete pfifo_fast with valid handle ok 5 4385 - Delete pfifo_fast with invalid handle ./tdc.py -c plug ok 1 3289 - Create PLUG with default setting ok 2 0917 - Create PLUG with block setting ok 3 483b - Create PLUG with release setting ok 4 4995 - Create PLUG with release_indefinite setting ok 5 389c - Create PLUG with limit setting ok 6 384a - Delete PLUG with valid handle ok 7 439a - Replace PLUG with limit setting ok 8 9831 - Change PLUG with limit setting ./tdc.py -c sfb ok 1 3294 - Create SFB with default setting ok 2 430a - Create SFB with rehash setting ok 3 3410 - Create SFB with db setting ok 4 49a0 - Create SFB with limit setting ok 5 1241 - Create SFB with max setting ok 6 3249 - Create SFB with target setting ok 7 30a9 - Create SFB with increment setting ok 8 239a - Create SFB with decrement setting ok 9 9301 - Create SFB with penalty_rate setting ok 10 2a01 - Create SFB with penalty_burst setting ok 11 3209 - Change SFB with rehash setting ok 12 5447 - Show SFB class ./tdc.py -c sfq ok 1 7482 - Create SFQ with default setting ok 2 c186 - Create SFQ with limit setting ok 3 ae23 - Create SFQ with perturb setting ok 4 a430 - Create SFQ with quantum setting ok 5 4539 - Create SFQ with divisor setting ok 6 b089 - Create SFQ with flows setting ok 7 99a0 - Create SFQ with depth setting ok 8 7389 - Create SFQ with headdrop setting ok 9 6472 - Create SFQ with redflowlimit setting ok 10 8929 - Show SFQ class ./tdc.py -c skbprio ok 1 283e - Create skbprio with default setting ok 2 c086 - Create skbprio with limit setting ok 3 6733 - Change skbprio with limit setting ok 4 2958 - Show skbprio class ./tdc.py -c taprio ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues) ok 2 9462 - Add taprio Qdisc with multiple sched-entry ok 3 8d92 - Add taprio Qdisc with txtime-delay ok 4 d092 - Delete taprio Qdisc with valid handle ok 5 8471 - Show taprio class ok 6 0a85 - Add taprio Qdisc to single-queue device ./tdc.py -c tbf ok 1 6430 - Create TBF with default setting ok 2 0518 - Create TBF with mtu setting ok 3 320a - Create TBF with peakrate setting ok 4 239b - Create TBF with latency setting ok 5 c975 - Create TBF with overhead setting ok 6 948c - Create TBF with linklayer setting ok 7 3549 - Replace TBF with mtu ok 8 f948 - Change TBF with latency time ok 9 2348 - Show TBF class ./tdc.py -c teql ok 1 84a0 - Create TEQL with default setting ok 2 7734 - Create TEQL with multiple device ok 3 34a9 - Delete TEQL with valid handle ok 4 6289 - Show TEQL stats --- v3: add config v2: modify subject prefix --- Zhengchao Shao (15): selftests/tc-testing: add selftests for atm qdisc selftests/tc-testing: add selftests for choke qdisc selftests/tc-testing: add selftests for codel qdisc selftests/tc-testing: add selftests for etf qdisc selftests/tc-testing: add selftests for fq qdisc selftests/tc-testing: add selftests for gred qdisc selftests/tc-testing: add selftests for hhf qdisc selftests/tc-testing: add selftests for pfifo_fast qdisc selftests/tc-testing: add selftests for plug qdisc selftests/tc-testing: add selftests for sfb qdisc selftests/tc-testing: add selftests for sfq qdisc selftests/tc-testing: add selftests for skbprio qdisc selftests/tc-testing: add selftests for taprio qdisc selftests/tc-testing: add selftests for tbf qdisc selftests/tc-testing: add selftests for teql qdisc tools/testing/selftests/tc-testing/config | 15 + .../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++ .../tc-testing/tc-tests/qdiscs/choke.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++ .../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++ .../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++ .../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++ .../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++ .../tc-testing/tc-tests/qdiscs/plug.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/sfb.json | 279 +++++++++++++ .../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++ .../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++ .../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++ .../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++ 16 files changed, 2750 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json -- 2.17.1

3 years, 2 months

2
16
0 0

[RFC PATCH v2 0/5] Make BPF ring buffer overwritable

by Francis Laniel

Hi. First, I hope you are fine and the same for your relatives. Normally, when BPF ring buffer are full, producers cannot write anymore and need to wait for consumer to get some data. As a consequence, calling bpf_ringbuf_reserve() from eBPF code returns NULL. This contribution adds a new flag to make BPF ring buffer overwritable. Perf ring buffers already implement an option to be overwritable. In order to avoid data corruption, the data is written backward, see commit 9ecda41acb97 ("perf/core: Add ::write_backward attribute to perf event"). This patch series re-uses the same idea from perf ring buffers but in BPF ring buffers. So, calling bpf_ringbuf_reserve() on an overwritable BPF ring buffer never returns NULL. As a consequence, oldest data will be overwritten by the newest so consumer will loose data. Overwritable ring buffers are useful in BPF programs that are permanently enabled but rarely read, only on-demand, for example in case of a user request to investigate problems. We would like to use this in the Traceloop project [1]. The self test added in this series was tested and validated in a VM: you@vm# ./share/linux/tools/testing/selftests/bpf/test_progs -t ringbuf_over Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. #135 ringbuf_over_writable:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED You can also test the libbpf implementation by using the last patch of this series which should be applied to iovisor/bcc: you@home$ cd /path/to/iovisor/bcc you@home$ git am -3 v2-0005-for-test-purpose-only-Add-toy-to-play-with-BPF-ri.patch you@home$ cd /path/to/linux/tools/lib/bpf you@home$ make -j$(nproc) you@home$ cp libbpf.a /path/to/iovisor/bcc/libbpf-tools/.output you@home$ cd /path/to/iovisor/bcc/libbpf-tools/ you@home$ make -j toy # Start your VM and copy toy executable inside it. root@vm-amd64:~# ./share/toy & [1] 287 root@vm-amd64:~# for i in {1..16}; do ls > /dev/null; done 16 15 14 13 12 11 10 9 root@vm-amd64:~# ls > /dev/null && ls > /dev/null 18 17 As you can see, the first eight events are overwritten. If you see any way to improve this contribution, feel free to share. Changes since: v1: * Made producers write backward like perf ring buffer, so it permits avoiding memory corruption. * Added libbpf implementation to consume all events available. * Added selftest. * Added documentation. Francis Laniel (5): bpf: Make ring buffer overwritable. selftests: Add BPF overwritable ring buffer self tests. docs/bpf: Add documentation for overwritable ring buffer. libbpf: Add implementation to consume overwritable BPF ring buffer. for test purpose only: Add toy to play with BPF ring. ...-only-Add-toy-to-play-with-BPF-ring-.patch | 147 ++++++++++++++++ Documentation/bpf/ringbuf.rst | 18 +- include/uapi/linux/bpf.h | 3 + kernel/bpf/ringbuf.c | 43 +++-- tools/include/uapi/linux/bpf.h | 3 + tools/lib/bpf/ringbuf.c | 106 ++++++++++++ tools/testing/selftests/bpf/Makefile | 5 +- .../bpf/prog_tests/ringbuf_overwritable.c | 158 ++++++++++++++++++ .../bpf/progs/test_ringbuf_overwritable.c | 61 +++++++ 9 files changed, 531 insertions(+), 13 deletions(-) create mode 100644 0001-for-test-purpose-only-Add-toy-to-play-with-BPF-ring-.patch create mode 100644 tools/testing/selftests/bpf/prog_tests/ringbuf_overwritable.c create mode 100644 tools/testing/selftests/bpf/progs/test_ringbuf_overwritable.c Best regards and thank you in advance. --- [1] https://github.com/kinvolk/traceloop Traceloop was presented at LPC 2020 (https://lpc.events/event/7/contributions/667/) -- 2.25.1

3 years, 2 months

2
6
0 0

[net-next v2 0/6] net: support QUIC crypto

by Adel Abouchaev

QUIC requires end to end encryption of the data. The application usually prepares the data in clear text, encrypts and calls send() which implies multiple copies of the data before the packets hit the networking stack. Similar to kTLS, QUIC kernel offload of cryptography reduces the memory pressure by reducing the number of copies. The scope of kernel support is limited to the symmetric cryptography, leaving the handshake to the user space library. For QUIC in particular, the application packets that require symmetric cryptography are the 1RTT packets with short headers. Kernel will encrypt the application packets on transmission and decrypt on receive. This series implements Tx only, because in QUIC server applications Tx outweighs Rx by orders of magnitude. Supporting the combination of QUIC and GSO requires the application to correctly place the data and the kernel to correctly slice it. The encryption process appends an arbitrary number of bytes (tag) to the end of the message to authenticate it. The GSO value should include this overhead, the offload would then subtract the tag size to parse the input on Tx before chunking and encrypting it. With the kernel cryptography, the buffer copy operation is conjoined with the encryption operation. The memory bandwidth is reduced by 5-8%. When devices supporting QUIC encryption in hardware come to the market, we will be able to free further 7% of CPU utilization which is used today for crypto operations. Adel Abouchaev (6): Documentation on QUIC kernel Tx crypto. Define QUIC specific constants, control and data plane structures Add UDP ULP operations, initialization and handling prototype functions. Implement QUIC offload functions Add flow counters and Tx processing error counter Add self tests for ULP operations, flow setup and crypto tests Documentation/networking/index.rst | 1 + Documentation/networking/quic.rst | 185 ++++ include/net/inet_sock.h | 2 + include/net/netns/mib.h | 3 + include/net/quic.h | 63 ++ include/net/snmp.h | 6 + include/net/udp.h | 33 + include/uapi/linux/quic.h | 60 + include/uapi/linux/snmp.h | 9 + include/uapi/linux/udp.h | 4 + net/Kconfig | 1 + net/Makefile | 1 + net/ipv4/Makefile | 3 +- net/ipv4/udp.c | 15 + net/ipv4/udp_ulp.c | 192 ++++ net/quic/Kconfig | 16 + net/quic/Makefile | 8 + net/quic/quic_main.c | 1417 ++++++++++++++++++++++++ net/quic/quic_proc.c | 45 + tools/testing/selftests/net/.gitignore | 4 +- tools/testing/selftests/net/Makefile | 3 +- tools/testing/selftests/net/quic.c | 1153 +++++++++++++++++++ tools/testing/selftests/net/quic.sh | 46 + 23 files changed, 3267 insertions(+), 3 deletions(-) create mode 100644 Documentation/networking/quic.rst create mode 100644 include/net/quic.h create mode 100644 include/uapi/linux/quic.h create mode 100644 net/ipv4/udp_ulp.c create mode 100644 net/quic/Kconfig create mode 100644 net/quic/Makefile create mode 100644 net/quic/quic_main.c create mode 100644 net/quic/quic_proc.c create mode 100644 tools/testing/selftests/net/quic.c create mode 100755 tools/testing/selftests/net/quic.sh base-commit: fd78d07c7c35de260eb89f1be4a1e7487b8092ad -- 2.30.2

3 years, 2 months

5
15
0 0

Re: [PATCH v5] selftests/landlock: Skip overlayfs tests not supported

by Mickaël Salaün

On 26/09/2022 16:23, Jeff Xu wrote: > On Thu, Aug 25, 2022 at 1:23 AM Mickaël Salaün <mic(a)digikod.net> wrote: >> >> As discussed for the v4, the next version of this patch needs a >> TEST_F_FORK() fix. >> > I can make TEST_F_FORK() to be skipped when SKIP() is called > in FIXTURE_SETUP(), but this makes FIXTURE_TEARDOWN() > complicated, because SKIP() can be called after any resource > creation failure in the FIXTURE_SETUP(). > > Another (better) option: add generic FIXTURE_CONFIG_CHECK() > FIXTURE_CONFIG_CHECK() checks the runtime configuration for > current FIXTURE, if the configuration is not met, the whole test will be > skipped, including FIXTURE_SETUP()/TEARDOWN(), TEST_F_FORK(), > so there is no resource clear up issue after test. This looks like a good idea. What do you think Shuah? > >> Please add a link to the previous patch (lore.kernel.org) for each new >> version. >> >> >> On 24/08/2022 03:58, jeffxu(a)chromium.org wrote: >>> From: Jeff Xu <jeffxu(a)chromium.org> >>> >>> overlayfs can be disabled in the kernel configuration (which is the case >>> for chromeOS), causing related tests to fail. Skip such tests when an >>> overlayfs mount operation failed because the running kernel doesn't >>> support this file system. >>> >>> Signed-off-by: Jeff Xu <jeffxu(a)chromium.org> >>> Reviewed-by: Guenter Roeck <groeck(a)chromium.org> >>> --- >>> tools/testing/selftests/landlock/fs_test.c | 54 ++++++++++++++++++++-- >>> 1 file changed, 51 insertions(+), 3 deletions(-) >>> >>> diff --git a/tools/testing/selftests/landlock/fs_test.c b/tools/testing/selftests/landlock/fs_test.c >>> index 21a2ce8fa739..645304d9fe98 100644 >>> --- a/tools/testing/selftests/landlock/fs_test.c >>> +++ b/tools/testing/selftests/landlock/fs_test.c >>> @@ -11,6 +11,7 @@ >>> #include <fcntl.h> >>> #include <linux/landlock.h> >>> #include <sched.h> >>> +#include <stdio.h> >>> #include <string.h> >>> #include <sys/capability.h> >>> #include <sys/mount.h> >>> @@ -169,6 +170,42 @@ static int remove_path(const char *const path) >>> return err; >>> } >>> >>> +static bool fgrep(FILE *file, const char *str) >>> +{ >>> + char line[32]; >>> + int str_len = strlen(str); >>> + >>> + while (!feof(file)) { >>> + if (!fgets(line, sizeof(line), file)) >>> + break; >>> + if (strncmp(line, str, str_len)) >>> + continue; >>> + >>> + return true; >>> + } >>> + >>> + return false; >>> +} >>> + >>> +static bool supports_overlayfs(void) >>> +{ >>> + bool ret; >>> + FILE *file = fopen("/proc/filesystems", "r"); >>> + >>> + /* >>> + * A failed attempt to open /proc/filesystems >>> + * implies that the file system is supported (default >>> + * behavior). This can help detect such unattended issue >>> + * (which should not happen)." >>> + */ >>> + if (!file) >>> + return true; >>> + >>> + ret = fgrep(file, "nodev\toverlay\n"); >>> + fclose(file); >>> + return ret; >>> +} >>> + >>> static void prepare_layout(struct __test_metadata *const _metadata) >>> { >>> disable_caps(_metadata); >>> @@ -3404,6 +3441,8 @@ FIXTURE(layout2_overlay) {}; >>> >>> FIXTURE_SETUP(layout2_overlay) >>> { >>> + int ret, err; >>> + >>> prepare_layout(_metadata); >>> >>> create_directory(_metadata, LOWER_BASE); >>> @@ -3431,11 +3470,20 @@ FIXTURE_SETUP(layout2_overlay) >>> create_directory(_metadata, MERGE_DATA); >>> set_cap(_metadata, CAP_SYS_ADMIN); >>> set_cap(_metadata, CAP_DAC_OVERRIDE); >>> - ASSERT_EQ(0, mount("overlay", MERGE_DATA, "overlay", 0, >>> - "lowerdir=" LOWER_DATA ",upperdir=" UPPER_DATA >>> - ",workdir=" UPPER_WORK)); >>> + >>> + ret = mount("overlay", MERGE_DATA, "overlay", 0, >>> + "lowerdir=" LOWER_DATA ",upperdir=" UPPER_DATA >>> + ",workdir=" UPPER_WORK); >>> + err = errno; >>> clear_cap(_metadata, CAP_DAC_OVERRIDE); >>> clear_cap(_metadata, CAP_SYS_ADMIN); >>> + >>> + if (ret == -1) { >>> + ASSERT_EQ(ENODEV, err); >>> + ASSERT_FALSE(supports_overlayfs()); >>> + SKIP(return, "overlayfs is not supported"); >>> + } >>> + ASSERT_EQ(0, ret); >>> } >>> >>> FIXTURE_TEARDOWN(layout2_overlay) >>> >>> base-commit: 50cd95ac46548429e5bba7ca75cc97d11a697947

3 years, 2 months

1
0
0 0

[PATCH] KVM: selftests: replace assertion with warning in access_tracking_perf_test

by Emanuele Giuseppe Esposito

Page_idle uses {ptep/pmdp}_clear_young_notify which in turn calls the mmu notifier callback ->clear_young(), which purposefully does not flush the TLB. When running the test in a nested guest, point 1. of the test doc header is violated, because KVM TLB is unbounded by size and since no flush is forced, KVM does not update the sptes accessed/idle bits resulting in guest assertion failure. More precisely, only the first ACCESS_WRITE in run_test() actually makes visible changes, because sptes are created and the accessed bit is set to 1 (or idle bit is 0). Then the first mark_memory_idle() passes since access bit is still one, and sets all pages as idle (or not accessed). When the next write is performed, the update is not flushed therefore idle is still 1 and next mark_memory_idle() fails. Signed-off-by: Emanuele Giuseppe Esposito <eesposit(a)redhat.com> --- .../selftests/kvm/access_tracking_perf_test.c | 25 ++++++++++++------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/kvm/access_tracking_perf_test.c b/tools/testing/selftests/kvm/access_tracking_perf_test.c index 1c2749b1481a..87b0bd5ebc65 100644 --- a/tools/testing/selftests/kvm/access_tracking_perf_test.c +++ b/tools/testing/selftests/kvm/access_tracking_perf_test.c @@ -31,8 +31,9 @@ * These limitations are worked around in this test by using a large enough * region of memory for each vCPU such that the number of translations cached in * the TLB and the number of pages held in pagevecs are a small fraction of the - * overall workload. And if either of those conditions are not true this test - * will fail rather than silently passing. + * overall workload. And if either of those conditions are not true (for example + * in nesting, where TLB size is unlimited) this test will print a warning + * rather than silently passing. */ #include <inttypes.h> #include <limits.h> @@ -172,17 +173,23 @@ static void mark_vcpu_memory_idle(struct kvm_vm *vm, vcpu_idx, no_pfn, pages); /* - * Test that at least 90% of memory has been marked idle (the rest might - * not be marked idle because the pages have not yet made it to an LRU - * list or the translations are still cached in the TLB). 90% is + * Check that at least 90% of memory has been marked idle (the rest + * might not be marked idle because the pages have not yet made it to an + * LRU list or the translations are still cached in the TLB). 90% is * arbitrary; high enough that we ensure most memory access went through * access tracking but low enough as to not make the test too brittle * over time and across architectures. + * + * Note that when run in nested virtualization, this check will trigger + * much more frequently because TLB size is unlimited and since no flush + * happens, much more pages are cached there and guest won't see the + * "idle" bit cleared. */ - TEST_ASSERT(still_idle < pages / 10, - "vCPU%d: Too many pages still idle (%"PRIu64 " out of %" - PRIu64 ").\n", - vcpu_idx, still_idle, pages); + if (still_idle < pages / 10) + printf("WARNING: vCPU%d: Too many pages still idle (%"PRIu64 " + out of %" PRIu64 "), this will affect performance results + .\n", + vcpu_idx, still_idle, pages); close(page_idle_fd); close(pagemap_fd); -- 2.31.1

3 years, 2 months

2
1
0 0

[net-next v2] selftests: Fix the if conditions of in test_extra_filter()

by Wang Yufen

The socket 2 bind the addr in use, bind should fail with EADDRINUSE. So if bind success or errno != EADDRINUSE, testcase should be failed. Fixes: 3ca8e4029969 ("soreuseport: BPF selection functional test") Signed-off-by: Wang Yufen <wangyufen(a)huawei.com> --- v1 -> v2: add a Fixes tag tools/testing/selftests/net/reuseport_bpf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/reuseport_bpf.c b/tools/testing/selftests/net/reuseport_bpf.c index 072d709c..65aea27 100644 --- a/tools/testing/selftests/net/reuseport_bpf.c +++ b/tools/testing/selftests/net/reuseport_bpf.c @@ -328,7 +328,7 @@ static void test_extra_filter(const struct test_params p) if (bind(fd1, addr, sockaddr_size())) error(1, errno, "failed to bind recv socket 1"); - if (!bind(fd2, addr, sockaddr_size()) && errno != EADDRINUSE) + if (!bind(fd2, addr, sockaddr_size()) || errno != EADDRINUSE) error(1, errno, "bind socket 2 should fail with EADDRINUSE"); free(addr); -- 1.8.3.1

3 years, 2 months

2
1
0 0

[PATCH -next v4 0/3] Optimize and bugfix for memory-hotplug

by Zhao Gongyi

1. Add checking after online or offline 2. Restore memory before exit 3. Correct test's name Changes in v4: - Remove redundant log information Changes in v3: - Remove 2 obselute patches Zhao Gongyi (3): selftests/memory-hotplug: Add checking after online or offline selftests/memory-hotplug: Restore memory before exit docs: notifier-error-inject: Correct test's name .../fault-injection/notifier-error-inject.rst | 4 +-- .../memory-hotplug/mem-on-off-test.sh | 27 +++++++++++++++---- 2 files changed, 24 insertions(+), 7 deletions(-) -- 2.17.1

3 years, 2 months

2
5
0 0

Re: [PATCH -next v3 1/3] selftests/memory-hotplug: Add checking after online or offline

by zhaogongyi

> > On 26.09.22 15:03, Zhao Gongyi wrote: > > Add checking for online_memory_expect_success()/ > > offline_memory_expect_success()/offline_memory_expect_fail(), or > the > > test would exit 0 although the functions return 1. > > > > Signed-off-by: Zhao Gongyi <zhaogongyi(a)huawei.com> > > --- > > .../selftests/memory-hotplug/mem-on-off-test.sh | 15 > ++++++++++++--- > > 1 file changed, 12 insertions(+), 3 deletions(-) > > > > diff --git a/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh > > b/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh > > index 46a97f318f58..3edda1f13f7b 100755 > > --- a/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh > > +++ b/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh > > @@ -266,7 +266,10 @@ done > > # > > echo $error > > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_ONLINE/error > > for memory in `hotpluggable_offline_memory`; do > > - online_memory_expect_fail $memory > > + online_memory_expect_fail $memory || { > > + echo "online memory $memory: unexpected success" > > The functions themself already print an error, isn't it sufficient to set > retval=1? Indeed, this function is only called once. It is no need to add the log info. > > > + retval=1 > > + } > > done > > > > # > > @@ -274,7 +277,10 @@ done > > # > > echo 0 > > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_ONLINE/error > > for memory in `hotpluggable_offline_memory`; do > > - online_memory_expect_success $memory > > + online_memory_expect_success $memory || { > > + echo "online memory $memory: unexpected fail" > > + retval=1 > > + } > > done > > > > # > > @@ -283,7 +289,10 @@ done > > echo $error > > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_OFFLINE/error > > for memory in `hotpluggable_online_memory`; do > > if [ $((RANDOM % 100)) -lt $ratio ]; then > > - offline_memory_expect_fail $memory > > + offline_memory_expect_fail $memory || { > > + echo "offline memory $memory: unexpected success" > > + retval=1 > > + } > > These functions return 0 if the result is as expected and 1 if the result is > unexpected. > > ... but wouldn't we evaluate the right hand side only if the result is "0" -- > expected? I might be wrong. > Yes, if offline_memory_expect_fail's return value is not zero, then it will set 'retval=1' > > Wouldn't it be simpler do it as in "Online all hot-pluggable memory again" > > if ! online_memory_expect_success $memory; then > retval=1 > fi > > (similarly adjusting the function name) I will send a new version of the patch to fix it. Kind regards, Gongyi

3 years, 2 months

1
0
0 0

[PATCH bpf-next v2] selftests/bpf: fix incorrect fcntl call (test_sockmap.c)

by Qiao Ma

In test_sockmap.c, the testcase sets socket nonblock first, and then calls select() and recvmsg() to receive data. If some error occur, nonblock setting will make recvmsg() return immediately, rather than blocking forever. However, the way to call fcntl() to set nonblock is wrong. To set socket noblock, we need to use > fcntl(fd, F_SETFL, O_NONBLOCK); rather than: > fcntl(fd, O_NONBLOCK); Signed-off-by: Qiao Ma <mqaio(a)linux.alibaba.com> --- tools/testing/selftests/bpf/test_sockmap.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/test_sockmap.c b/tools/testing/selftests/bpf/test_sockmap.c index 0fbaccdc8861..abb4102f33b0 100644 --- a/tools/testing/selftests/bpf/test_sockmap.c +++ b/tools/testing/selftests/bpf/test_sockmap.c @@ -598,7 +598,12 @@ static int msg_loop(int fd, int iov_count, int iov_length, int cnt, struct timeval timeout; fd_set w; - fcntl(fd, fd_flags); + err = fcntl(fd, F_SETFL, fd_flags); + if (err < 0) { + perror("fcntl failed"); + goto out_errno; + } + /* Account for pop bytes noting each iteration of apply will * call msg_pop_data helper so we need to account for this * by calculating the number of apply iterations. Note user -- 1.8.3.1

3 years, 2 months

5
5
0 0

[PATCH -next v3 0/3] Optimize and bugfix for memory-hotplug

by Zhao Gongyi

1. Add checking after online or offline 2. Restore memory before exit 3. Correct test's name Changes in v3: - Remove 2 obselute patches Zhao Gongyi (3): selftests/memory-hotplug: Add checking after online or offline selftests/memory-hotplug: Restore memory before exit docs: notifier-error-inject: Correct test's name .../fault-injection/notifier-error-inject.rst | 4 +-- .../memory-hotplug/mem-on-off-test.sh | 29 +++++++++++++++---- 2 files changed, 26 insertions(+), 7 deletions(-) -- 2.17.1

3 years, 2 months

2
4
0 0

[PATCH v6 1/2] selftests: vm: bring common functions to a new file

by Muhammad Usama Anjum

Bring common functions to a new file while keeping code as much same as possible. These functions can be used in the new tests. This helps in avoiding code duplication. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- Changes in V6: - Correct header files inclusion Changes in V5: Keep moved code as same as possible - Updated macros names - Removed macro used to show bit number of dirty bit, added a comment instead - Corrected indentation --- tools/testing/selftests/vm/Makefile | 7 +- tools/testing/selftests/vm/madv_populate.c | 34 +----- .../selftests/vm/split_huge_page_test.c | 79 +------------ tools/testing/selftests/vm/vm_util.c | 108 ++++++++++++++++++ tools/testing/selftests/vm/vm_util.h | 9 ++ 5 files changed, 124 insertions(+), 113 deletions(-) create mode 100644 tools/testing/selftests/vm/vm_util.c create mode 100644 tools/testing/selftests/vm/vm_util.h diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile index 5e43f072f5b76..4e68edb26d6b6 100644 --- a/tools/testing/selftests/vm/Makefile +++ b/tools/testing/selftests/vm/Makefile @@ -34,7 +34,7 @@ TEST_GEN_FILES += hugepage-mremap TEST_GEN_FILES += hugepage-shm TEST_GEN_FILES += hugepage-vmemmap TEST_GEN_FILES += khugepaged -TEST_GEN_FILES += madv_populate +TEST_GEN_PROGS = madv_populate TEST_GEN_FILES += map_fixed_noreplace TEST_GEN_FILES += map_hugetlb TEST_GEN_FILES += map_populate @@ -47,7 +47,7 @@ TEST_GEN_FILES += on-fault-limit TEST_GEN_FILES += thuge-gen TEST_GEN_FILES += transhuge-stress TEST_GEN_FILES += userfaultfd -TEST_GEN_FILES += split_huge_page_test +TEST_GEN_PROGS += split_huge_page_test TEST_GEN_FILES += ksm_tests ifeq ($(MACHINE),x86_64) @@ -91,6 +91,9 @@ TEST_FILES := test_vmalloc.sh KSFT_KHDR_INSTALL := 1 include ../lib.mk +$(OUTPUT)/madv_populate: vm_util.c +$(OUTPUT)/split_huge_page_test: vm_util.c + ifeq ($(MACHINE),x86_64) BINARIES_32 := $(patsubst %,$(OUTPUT)/%,$(BINARIES_32)) BINARIES_64 := $(patsubst %,$(OUTPUT)/%,$(BINARIES_64)) diff --git a/tools/testing/selftests/vm/madv_populate.c b/tools/testing/selftests/vm/madv_populate.c index 3ee0e82756002..715a42e8e2cdb 100644 --- a/tools/testing/selftests/vm/madv_populate.c +++ b/tools/testing/selftests/vm/madv_populate.c @@ -18,6 +18,7 @@ #include <sys/mman.h> #include "../kselftest.h" +#include "vm_util.h" /* * For now, we're using 2 MiB of private anonymous memory for all tests. @@ -26,18 +27,6 @@ static size_t pagesize; -static uint64_t pagemap_get_entry(int fd, char *start) -{ - const unsigned long pfn = (unsigned long)start / pagesize; - uint64_t entry; - int ret; - - ret = pread(fd, &entry, sizeof(entry), pfn * sizeof(entry)); - if (ret != sizeof(entry)) - ksft_exit_fail_msg("reading pagemap failed\n"); - return entry; -} - static bool pagemap_is_populated(int fd, char *start) { uint64_t entry = pagemap_get_entry(fd, start); @@ -46,13 +35,6 @@ static bool pagemap_is_populated(int fd, char *start) return entry & 0xc000000000000000ull; } -static bool pagemap_is_softdirty(int fd, char *start) -{ - uint64_t entry = pagemap_get_entry(fd, start); - - return entry & 0x0080000000000000ull; -} - static void sense_support(void) { char *addr; @@ -258,20 +240,6 @@ static bool range_is_not_softdirty(char *start, ssize_t size) return ret; } -static void clear_softdirty(void) -{ - int fd = open("/proc/self/clear_refs", O_WRONLY); - const char *ctrl = "4"; - int ret; - - if (fd < 0) - ksft_exit_fail_msg("opening clear_refs failed\n"); - ret = write(fd, ctrl, strlen(ctrl)); - if (ret != strlen(ctrl)) - ksft_exit_fail_msg("writing clear_refs failed\n"); - close(fd); -} - static void test_softdirty(void) { char *addr; diff --git a/tools/testing/selftests/vm/split_huge_page_test.c b/tools/testing/selftests/vm/split_huge_page_test.c index 52497b7b9f1db..6aa2b8253aeda 100644 --- a/tools/testing/selftests/vm/split_huge_page_test.c +++ b/tools/testing/selftests/vm/split_huge_page_test.c @@ -16,14 +16,13 @@ #include <sys/mount.h> #include <malloc.h> #include <stdbool.h> +#include "vm_util.h" uint64_t pagesize; unsigned int pageshift; uint64_t pmd_pagesize; -#define PMD_SIZE_PATH "/sys/kernel/mm/transparent_hugepage/hpage_pmd_size" #define SPLIT_DEBUGFS "/sys/kernel/debug/split_huge_pages" -#define SMAP_PATH "/proc/self/smaps" #define INPUT_MAX 80 #define PID_FMT "%d,0x%lx,0x%lx" @@ -51,30 +50,6 @@ int is_backed_by_thp(char *vaddr, int pagemap_file, int kpageflags_file) return 0; } - -static uint64_t read_pmd_pagesize(void) -{ - int fd; - char buf[20]; - ssize_t num_read; - - fd = open(PMD_SIZE_PATH, O_RDONLY); - if (fd == -1) { - perror("Open hpage_pmd_size failed"); - exit(EXIT_FAILURE); - } - num_read = read(fd, buf, 19); - if (num_read < 1) { - close(fd); - perror("Read hpage_pmd_size failed"); - exit(EXIT_FAILURE); - } - buf[num_read] = '\0'; - close(fd); - - return strtoul(buf, NULL, 10); -} - static int write_file(const char *path, const char *buf, size_t buflen) { int fd; @@ -113,58 +88,6 @@ static void write_debugfs(const char *fmt, ...) } } -#define MAX_LINE_LENGTH 500 - -static bool check_for_pattern(FILE *fp, const char *pattern, char *buf) -{ - while (fgets(buf, MAX_LINE_LENGTH, fp) != NULL) { - if (!strncmp(buf, pattern, strlen(pattern))) - return true; - } - return false; -} - -static uint64_t check_huge(void *addr) -{ - uint64_t thp = 0; - int ret; - FILE *fp; - char buffer[MAX_LINE_LENGTH]; - char addr_pattern[MAX_LINE_LENGTH]; - - ret = snprintf(addr_pattern, MAX_LINE_LENGTH, "%08lx-", - (unsigned long) addr); - if (ret >= MAX_LINE_LENGTH) { - printf("%s: Pattern is too long\n", __func__); - exit(EXIT_FAILURE); - } - - - fp = fopen(SMAP_PATH, "r"); - if (!fp) { - printf("%s: Failed to open file %s\n", __func__, SMAP_PATH); - exit(EXIT_FAILURE); - } - if (!check_for_pattern(fp, addr_pattern, buffer)) - goto err_out; - - /* - * Fetch the AnonHugePages: in the same block and check the number of - * hugepages. - */ - if (!check_for_pattern(fp, "AnonHugePages:", buffer)) - goto err_out; - - if (sscanf(buffer, "AnonHugePages:%10ld kB", &thp) != 1) { - printf("Reading smap error\n"); - exit(EXIT_FAILURE); - } - -err_out: - fclose(fp); - return thp; -} - void split_pmd_thp(void) { char *one_page; diff --git a/tools/testing/selftests/vm/vm_util.c b/tools/testing/selftests/vm/vm_util.c new file mode 100644 index 0000000000000..b58ab11a7a302 --- /dev/null +++ b/tools/testing/selftests/vm/vm_util.c @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <string.h> +#include <fcntl.h> +#include "../kselftest.h" +#include "vm_util.h" + +#define PMD_SIZE_FILE_PATH "/sys/kernel/mm/transparent_hugepage/hpage_pmd_size" +#define SMAP_FILE_PATH "/proc/self/smaps" +#define MAX_LINE_LENGTH 500 + +uint64_t pagemap_get_entry(int fd, char *start) +{ + const unsigned long pfn = (unsigned long)start / getpagesize(); + uint64_t entry; + int ret; + + ret = pread(fd, &entry, sizeof(entry), pfn * sizeof(entry)); + if (ret != sizeof(entry)) + ksft_exit_fail_msg("reading pagemap failed\n"); + return entry; +} + +bool pagemap_is_softdirty(int fd, char *start) +{ + uint64_t entry = pagemap_get_entry(fd, start); + + // Check if dirty bit (55th bit) is set + return entry & 0x0080000000000000ull; +} + +void clear_softdirty(void) +{ + int ret; + const char *ctrl = "4"; + int fd = open("/proc/self/clear_refs", O_WRONLY); + + if (fd < 0) + ksft_exit_fail_msg("opening clear_refs failed\n"); + ret = write(fd, ctrl, strlen(ctrl)); + close(fd); + if (ret != strlen(ctrl)) + ksft_exit_fail_msg("writing clear_refs failed\n"); +} + +static bool check_for_pattern(FILE *fp, const char *pattern, char *buf) +{ + while (fgets(buf, MAX_LINE_LENGTH, fp) != NULL) { + if (!strncmp(buf, pattern, strlen(pattern))) + return true; + } + return false; +} + +uint64_t read_pmd_pagesize(void) +{ + int fd; + char buf[20]; + ssize_t num_read; + + fd = open(PMD_SIZE_FILE_PATH, O_RDONLY); + if (fd == -1) + ksft_exit_fail_msg("Open hpage_pmd_size failed\n"); + + num_read = read(fd, buf, 19); + if (num_read < 1) { + close(fd); + ksft_exit_fail_msg("Read hpage_pmd_size failed\n"); + } + buf[num_read] = '\0'; + close(fd); + + return strtoul(buf, NULL, 10); +} + +uint64_t check_huge(void *addr) +{ + uint64_t thp = 0; + int ret; + FILE *fp; + char buffer[MAX_LINE_LENGTH]; + char addr_pattern[MAX_LINE_LENGTH]; + + ret = snprintf(addr_pattern, MAX_LINE_LENGTH, "%08lx-", + (unsigned long) addr); + if (ret >= MAX_LINE_LENGTH) + ksft_exit_fail_msg("%s: Pattern is too long\n", __func__); + + fp = fopen(SMAP_FILE_PATH, "r"); + if (!fp) + ksft_exit_fail_msg("%s: Failed to open file %s\n", __func__, SMAP_FILE_PATH); + + if (!check_for_pattern(fp, addr_pattern, buffer)) + goto err_out; + + /* + * Fetch the AnonHugePages: in the same block and check the number of + * hugepages. + */ + if (!check_for_pattern(fp, "AnonHugePages:", buffer)) + goto err_out; + + if (sscanf(buffer, "AnonHugePages:%10ld kB", &thp) != 1) + ksft_exit_fail_msg("Reading smap error\n"); + +err_out: + fclose(fp); + return thp; +} diff --git a/tools/testing/selftests/vm/vm_util.h b/tools/testing/selftests/vm/vm_util.h new file mode 100644 index 0000000000000..2e512bd57ae14 --- /dev/null +++ b/tools/testing/selftests/vm/vm_util.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include <stdint.h> +#include <stdbool.h> + +uint64_t pagemap_get_entry(int fd, char *start); +bool pagemap_is_softdirty(int fd, char *start); +void clear_softdirty(void); +uint64_t read_pmd_pagesize(void); +uint64_t check_huge(void *addr); -- 2.30.2

3 years, 2 months

3
6
0 0

[PATCH net-next,v2 00/15] add tc-testing qdisc test cases

by Zhengchao Shao

For this patchset, test cases of the qdisc modules are added to the tc-testing test suite. After a test case is added locally, the test result is as follows: ./tdc.py -c atm ok 1 7628 - Create ATM with default setting ok 2 390a - Delete ATM with valid handle ok 3 32a0 - Show ATM class ok 4 6310 - Dump ATM stats ./tdc.py -c choke ok 1 8937 - Create CHOKE with default setting ok 2 48c0 - Create CHOKE with min packet setting ok 3 38c1 - Create CHOKE with max packet setting ok 4 234a - Create CHOKE with ecn setting ok 5 4380 - Create CHOKE with burst setting ok 6 48c7 - Delete CHOKE with valid handle ok 7 4398 - Replace CHOKE with min setting ok 8 0301 - Change CHOKE with limit setting ./tdc.py -c codel ok 1 983a - Create CODEL with default setting ok 2 38aa - Create CODEL with limit packet setting ok 3 9178 - Create CODEL with target setting ok 4 78d1 - Create CODEL with interval setting ok 5 238a - Create CODEL with ecn setting ok 6 939c - Create CODEL with ce_threshold setting ok 7 8380 - Delete CODEL with valid handle ok 8 289c - Replace CODEL with limit setting ok 9 0648 - Change CODEL with limit setting ./tdc.py -c etf ok 1 34ba - Create ETF with default setting ok 2 438f - Create ETF with delta nanos setting ok 3 9041 - Create ETF with deadline_mode setting ok 4 9a0c - Create ETF with skip_sock_check setting ok 5 2093 - Delete ETF with valid handle ./tdc.py -c fq ok 1 983b - Create FQ with default setting ok 2 38a1 - Create FQ with limit packet setting ok 3 0a18 - Create FQ with flow_limit setting ok 4 2390 - Create FQ with quantum setting ok 5 845b - Create FQ with initial_quantum setting ok 6 9398 - Create FQ with maxrate setting ok 7 342c - Create FQ with nopacing setting ok 8 6391 - Create FQ with refill_delay setting ok 9 238b - Create FQ with low_rate_threshold setting ok 10 7582 - Create FQ with orphan_mask setting ok 11 4894 - Create FQ with timer_slack setting ok 12 324c - Create FQ with ce_threshold setting ok 13 424a - Create FQ with horizon time setting ok 14 89e1 - Create FQ with horizon_cap setting ok 15 32e1 - Delete FQ with valid handle ok 16 49b0 - Replace FQ with limit setting ok 17 9478 - Change FQ with limit setting ./tdc.py -c gred ok 1 8942 - Create GRED with default setting ok 2 5783 - Create GRED with grio setting ok 3 8a09 - Create GRED with limit setting ok 4 48cb - Create GRED with ecn setting ok 5 763a - Change GRED setting ok 6 8309 - Show GRED class ./tdc.py -c hhf ok 1 4812 - Create HHF with default setting ok 2 8a92 - Create HHF with limit setting ok 3 3491 - Create HHF with quantum setting ok 4 ba04 - Create HHF with reset_timeout setting ok 5 4238 - Create HHF with admit_bytes setting ok 6 839f - Create HHF with evict_timeout setting ok 7 a044 - Create HHF with non_hh_weight setting ok 8 32f9 - Change HHF with limit setting ok 9 385e - Show HHF class ./tdc.py -c pfifo_fast ok 1 900c - Create pfifo_fast with default setting ok 2 7470 - Dump pfifo_fast stats ok 3 b974 - Replace pfifo_fast with different handle ok 4 3240 - Delete pfifo_fast with valid handle ok 5 4385 - Delete pfifo_fast with invalid handle ./tdc.py -c plug ok 1 3289 - Create PLUG with default setting ok 2 0917 - Create PLUG with block setting ok 3 483b - Create PLUG with release setting ok 4 4995 - Create PLUG with release_indefinite setting ok 5 389c - Create PLUG with limit setting ok 6 384a - Delete PLUG with valid handle ok 7 439a - Replace PLUG with limit setting ok 8 9831 - Change PLUG with limit setting ./tdc.py -c sfb ok 1 3294 - Create SFB with default setting ok 2 430a - Create SFB with rehash setting ok 3 3410 - Create SFB with db setting ok 4 49a0 - Create SFB with limit setting ok 5 1241 - Create SFB with max setting ok 6 3249 - Create SFB with target setting ok 7 30a9 - Create SFB with increment setting ok 8 239a - Create SFB with decrement setting ok 9 9301 - Create SFB with penalty_rate setting ok 10 2a01 - Create SFB with penalty_burst setting ok 11 3209 - Change SFB with rehash setting ok 12 5447 - Show SFB class ./tdc.py -c sfq ok 1 7482 - Create SFQ with default setting ok 2 c186 - Create SFQ with limit setting ok 3 ae23 - Create SFQ with perturb setting ok 4 a430 - Create SFQ with quantum setting ok 5 4539 - Create SFQ with divisor setting ok 6 b089 - Create SFQ with flows setting ok 7 99a0 - Create SFQ with depth setting ok 8 7389 - Create SFQ with headdrop setting ok 9 6472 - Create SFQ with redflowlimit setting ok 10 8929 - Show SFQ class ./tdc.py -c skbprio ok 1 283e - Create skbprio with default setting ok 2 c086 - Create skbprio with limit setting ok 3 6733 - Change skbprio with limit setting ok 4 2958 - Show skbprio class ./tdc.py -c taprio ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues) ok 2 9462 - Add taprio Qdisc with multiple sched-entry ok 3 8d92 - Add taprio Qdisc with txtime-delay ok 4 d092 - Delete taprio Qdisc with valid handle ok 5 8471 - Show taprio class ok 6 0a85 - Add taprio Qdisc to single-queue device ./tdc.py -c tbf ok 1 6430 - Create TBF with default setting ok 2 0518 - Create TBF with mtu setting ok 3 320a - Create TBF with peakrate setting ok 4 239b - Create TBF with latency setting ok 5 c975 - Create TBF with overhead setting ok 6 948c - Create TBF with linklayer setting ok 7 3549 - Replace TBF with mtu ok 8 f948 - Change TBF with latency time ok 9 2348 - Show TBF class ./tdc.py -c teql ok 1 84a0 - Create TEQL with default setting ok 2 7734 - Create TEQL with multiple device ok 3 34a9 - Delete TEQL with valid handle ok 4 6289 - Show TEQL stats --- v2: modify subject prefix --- Zhengchao Shao (15): selftests/tc-testing: add selftests for atm qdisc selftests/tc-testing: add selftests for choke qdisc selftests/tc-testing: add selftests for codel qdisc selftests/tc-testing: add selftests for etf qdisc selftests/tc-testing: add selftests for fq qdisc selftests/tc-testing: add selftests for gred qdisc selftests/tc-testing: add selftests for hhf qdisc selftests/tc-testing: add selftests for pfifo_fast qdisc selftests/tc-testing: add selftests for plug qdisc selftests/tc-testing: add selftests for sfb qdisc selftests/tc-testing: add selftests for sfq qdisc selftests/tc-testing: add selftests for skbprio qdisc selftests/tc-testing: add selftests for taprio qdisc selftests/tc-testing: add selftests for tbf qdisc selftests/tc-testing: add selftests for teql qdisc .../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++ .../tc-testing/tc-tests/qdiscs/choke.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++ .../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++ .../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++ .../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++ .../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++ .../tc-testing/tc-tests/qdiscs/plug.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/sfb.json | 279 +++++++++++++ .../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++ .../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++ .../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++ .../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++ 15 files changed, 2735 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json -- 2.17.1

3 years, 2 months

5
20
0 0

[GIT PULL] Landlock fix for v6.0 #2

by Mickaël Salaün

Hi Linus, This change fixes out-of-tree builds for Landlock tests, which was initially identified here: https://lore.kernel.org/r/CADYN=9JM1nnjC9LypHqrz7JJjbZLpm8rArDUy4zgYYrajErB… Please pull this Landlock fix for v6.0-rc7 . This change merged cleanly with your tree, and have been successfully tested in the latest linux-next releases for a week. Regards, Mickaël -- The following changes since commit 80e78fcce86de0288793a0ef0f6acf37656ee4cf: Linux 6.0-rc5 (2022-09-11 16:22:01 -0400) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux.git tags/landlock-6.0-rc7 for you to fetch changes up to a52540522c9541bfa3e499d2edba7bc0ca73a4ca: selftests/landlock: Fix out-of-tree builds (2022-09-14 16:37:38 +0200) ---------------------------------------------------------------- Landlock fix for v6.0-rc7 ---------------------------------------------------------------- Mickaël Salaün (1): selftests/landlock: Fix out-of-tree builds tools/testing/selftests/landlock/Makefile | 19 ++++++++++--------- tools/testing/selftests/lib.mk | 4 ++++ 2 files changed, 14 insertions(+), 9 deletions(-)

3 years, 2 months

3
2
0 0

[PATCH v1] selftests/landlock: Fix out-of-tree builds

by Mickaël Salaün

These changes simplify the Makefile and handle these 5 ways to build Landlock tests: - make -C tools/testing/selftests/landlock - make -C tools/testing/selftests TARGETS=landlock gen_tar - make TARGETS=landlock kselftest-gen_tar - make TARGETS=landlock O=build kselftest-gen_tar - make -C /tmp/linux TARGETS=landlock O=/tmp/build kselftest-gen_tar This also makes $(KHDR_INCLUDES) available to other test collections when building in their directory. Fixes: f1227dc7d041 ("selftests/landlock: fix broken include of linux/landlock.h") Fixes: 3bb267a36185 ("selftests: drop khdr make target") Cc: Anders Roxell <anders.roxell(a)linaro.org> Cc: Guillaume Tucker <guillaume.tucker(a)collabora.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Mickaël Salaün <mic(a)digikod.net> Link: https://lore.kernel.org/r/20220909103402.1501802-1-mic@digikod.net --- tools/testing/selftests/landlock/Makefile | 19 ++++++++++--------- tools/testing/selftests/lib.mk | 4 ++++ 2 files changed, 14 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/landlock/Makefile b/tools/testing/selftests/landlock/Makefile index 02868ac3bc71..6632bfff486b 100644 --- a/tools/testing/selftests/landlock/Makefile +++ b/tools/testing/selftests/landlock/Makefile @@ -1,6 +1,11 @@ # SPDX-License-Identifier: GPL-2.0 +# +# First run: make -C ../../../.. headers_install CFLAGS += -Wall -O2 $(KHDR_INCLUDES) +LDLIBS += -lcap + +LOCAL_HDRS += common.h src_test := $(wildcard *_test.c) @@ -8,14 +13,10 @@ TEST_GEN_PROGS := $(src_test:.c=) TEST_GEN_PROGS_EXTENDED := true -OVERRIDE_TARGETS := 1 -top_srcdir := ../../../.. -include ../lib.mk - -khdr_dir = $(top_srcdir)/usr/include +# Static linking for short targets: +$(TEST_GEN_PROGS_EXTENDED): LDFLAGS += -static -$(OUTPUT)/true: true.c - $(LINK.c) $< $(LDLIBS) -o $@ -static +include ../lib.mk -$(OUTPUT)/%_test: %_test.c $(khdr_dir)/linux/landlock.h ../kselftest_harness.h common.h - $(LINK.c) $< $(LDLIBS) -o $@ -lcap -I$(khdr_dir) +# Static linking for targets with $(OUTPUT)/ prefix: +$(TEST_GEN_PROGS_EXTENDED): LDFLAGS += -static diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index d44c72b3abe3..9d4cb94cf437 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -42,6 +42,10 @@ endif selfdir = $(realpath $(dir $(filter %/lib.mk,$(MAKEFILE_LIST)))) top_srcdir = $(selfdir)/../../.. +ifeq ($(KHDR_INCLUDES),) +KHDR_INCLUDES := -isystem $(top_srcdir)/usr/include +endif + # The following are built by lib.mk common compile rules. # TEST_CUSTOM_PROGS should be used by tests that require # custom build rule and prevent common build rule use. base-commit: 7e18e42e4b280c85b76967a9106a13ca61c16179 -- 2.37.2

3 years, 2 months

2
4
0 0

[PATCH net-next] selftests/bonding: re-add lladdr target test

by Matthieu Baerts

It looks like this test has been accidentally dropped when resolving conflicts in this Makefile. Most probably because there were 3 different patches modifying this file in parallel: commit 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") commit bbb774d921e2 ("net: Add tests for bonding and team address list management") commit 2ffd57327ff1 ("selftests: bonding: cause oops in bond_rr_gen_slave_id") The first one was applied in 'net-next' while the two other ones were recently applied in the 'net' tree. But that's alright, easy to fix by re-adding the missing one! Fixes: 0140a7168f8b ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Signed-off-by: Matthieu Baerts <matthieu.baerts(a)tessares.net> --- tools/testing/selftests/drivers/net/bonding/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile index d14846fcf3d1..e9dab5f9d773 100644 --- a/tools/testing/selftests/drivers/net/bonding/Makefile +++ b/tools/testing/selftests/drivers/net/bonding/Makefile @@ -4,6 +4,7 @@ TEST_PROGS := \ bond-arp-interval-causes-panic.sh \ bond-break-lacpdu-tx.sh \ + bond-lladdr-target.sh \ dev_addr_lists.sh TEST_FILES := lag_lib.sh base-commit: d05d9eb79d0cd0f7a978621b4a56a1f2db444f86 -- 2.37.2

3 years, 2 months

4
3
0 0

[PATCH] selftests/livepatch: normalize sysctl error message

by Joe Lawrence

The livepatch kselftests rely on comparing expected and actual output from such commands as sysctl. A recent commit in procps-ng v4.0.0 [1] changed sysctl's output to emit key pathnames like: sysctl: setting key "/proc/sys/kernel/ftrace_enabled": Device or resource busy versus previous dotted output: sysctl: setting key "kernel.ftrace_enabled": Device or resource busy The modification in output was later reverted [2], but since the change has been tagged in procps-ng v4.0.0, update the livepatch kselftest to handle either case. [1] https://gitlab.com/procps-ng/procps/-/commit/6389deca5bf667f5fab5912acde78b… [2] https://gitlab.com/procps-ng/procps/-/commit/b159c198c9160a8eb13254e2b631d0… Reported-by: Dennis(Zhuoheng) Li <denli(a)redhat.com> Signed-off-by: Joe Lawrence <joe.lawrence(a)redhat.com> --- tools/testing/selftests/livepatch/functions.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/livepatch/functions.sh b/tools/testing/selftests/livepatch/functions.sh index 9230b869371d..d5001c9eb72e 100644 --- a/tools/testing/selftests/livepatch/functions.sh +++ b/tools/testing/selftests/livepatch/functions.sh @@ -86,7 +86,7 @@ function set_ftrace_enabled() { if [[ "$result" != "$1" ]] ; then if [[ $can_fail -eq 1 ]] ; then - echo "livepatch: $err" > /dev/kmsg + echo "livepatch: $err" | sed 's#/proc/sys/kernel/#kernel.#' > /dev/kmsg return fi -- 2.26.3

3 years, 2 months

3
2
0 0

Zwiększenie płynności finansowej

by Jakub Olejniczak

Dzień dobry, kontaktuję się z Państwem, ponieważ chciałbym zaproponować wygodne rozwiązanie, które umożliwi Państwa firmie stabilny rozwój. Konkurencyjne otoczenie wymaga ciągłego ulepszania i poszerzenia oferty, co z kolei wiąże się z koniecznością inwestowania. Brak odpowiedniego kapitału poważnie ogranicza tempo rozwoju firmy. Od wielu lat z powodzeniem pomagam firmom w uzyskaniu najlepszej formy finansowania z banku oraz UE. Mam stałych Klientów, którzy nadal chętnie korzystają z moich usług, a także polecają je innym. Czy chcieliby Państwo skorzystać z pomocy wykwalifikowanego i doświadczonego doradcy finansowego? Pozdrawiam Jakub Olejniczak

3 years, 2 months

1
0
0 0

[net-next] selftests: Fix the if conditions of in test_extra_filter()

by Wang Yufen

The socket 2 bind the addr in use, bind should fail with EADDRINUSE. So if bind success or errno != EADDRINUSE, testcase should be failed. Signed-off-by: Wang Yufen <wangyufen(a)huawei.com> --- tools/testing/selftests/net/reuseport_bpf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/reuseport_bpf.c b/tools/testing/selftests/net/reuseport_bpf.c index 072d709c..65aea27 100644 --- a/tools/testing/selftests/net/reuseport_bpf.c +++ b/tools/testing/selftests/net/reuseport_bpf.c @@ -328,7 +328,7 @@ static void test_extra_filter(const struct test_params p) if (bind(fd1, addr, sockaddr_size())) error(1, errno, "failed to bind recv socket 1"); - if (!bind(fd2, addr, sockaddr_size()) && errno != EADDRINUSE) + if (!bind(fd2, addr, sockaddr_size()) || errno != EADDRINUSE) error(1, errno, "bind socket 2 should fail with EADDRINUSE"); free(addr); -- 1.8.3.1

3 years, 2 months

3
2
0 0

[PATCH linux-next] KVM: selftests: remove redundant variable tsc_val

by cgel.zte＠gmail.com

From: Jinpeng Cui <cui.jinpeng2(a)zte.com.cn> Return value directly from expression instead of getting value from redundant variable tsc_val. Reported-by: Zeal Robot <zealci(a)zte.com.cn> Signed-off-by: Jinpeng Cui <cui.jinpeng2(a)zte.com.cn> --- tools/testing/selftests/kvm/include/x86_64/processor.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/kvm/include/x86_64/processor.h b/tools/testing/selftests/kvm/include/x86_64/processor.h index 0cbc71b7af50..75920678f34d 100644 --- a/tools/testing/selftests/kvm/include/x86_64/processor.h +++ b/tools/testing/selftests/kvm/include/x86_64/processor.h @@ -237,7 +237,6 @@ static inline uint64_t get_desc64_base(const struct desc64 *desc) static inline uint64_t rdtsc(void) { uint32_t eax, edx; - uint64_t tsc_val; /* * The lfence is to wait (on Intel CPUs) until all previous * instructions have been executed. If software requires RDTSC to be @@ -245,8 +244,8 @@ static inline uint64_t rdtsc(void) * execute LFENCE immediately after RDTSC */ __asm__ __volatile__("lfence; rdtsc; lfence" : "=a"(eax), "=d"(edx)); - tsc_val = ((uint64_t)edx) << 32 | eax; - return tsc_val; + + return ((uint64_t)edx) << 32 | eax; } static inline uint64_t rdtscp(uint32_t *aux) -- 2.25.1

3 years, 2 months

5
5
0 0

[PATCH -next, v3 00/10] cleanup in Huawei hinic driver

by Zhengchao Shao

Do code cleanup in Huawei hinic driver. Zhengchao Shao (10): net: hinic: modify kernel doc comments net: hinic: change type of function to be static net: hinic: remove unused functions net: hinic: remove unused macro net: hinic: remove duplicate macro definition net: hinic: simplify code logic net: hinic: change hinic_deinit_vf_hw() to void net: hinic: remove unused enumerated value net: hinic: replace magic numbers with macro net: hinic: remove the unused input parameter prod_idx in sq_prepare_ctrl() .../net/ethernet/huawei/hinic/hinic_debugfs.h | 1 - .../net/ethernet/huawei/hinic/hinic_ethtool.c | 1 - .../net/ethernet/huawei/hinic/hinic_hw_cmdq.c | 9 ++--- .../net/ethernet/huawei/hinic/hinic_hw_cmdq.h | 3 -- .../net/ethernet/huawei/hinic/hinic_hw_csr.h | 1 - .../net/ethernet/huawei/hinic/hinic_hw_dev.c | 17 ++------- .../net/ethernet/huawei/hinic/hinic_hw_dev.h | 5 --- .../net/ethernet/huawei/hinic/hinic_hw_if.c | 35 ------------------- .../net/ethernet/huawei/hinic/hinic_hw_if.h | 9 ----- .../net/ethernet/huawei/hinic/hinic_hw_mbox.c | 9 ++--- .../net/ethernet/huawei/hinic/hinic_hw_mbox.h | 4 --- .../net/ethernet/huawei/hinic/hinic_hw_qp.c | 11 +++--- .../net/ethernet/huawei/hinic/hinic_hw_qp.h | 5 ++- .../net/ethernet/huawei/hinic/hinic_hw_wq.c | 2 -- .../net/ethernet/huawei/hinic/hinic_hw_wqe.h | 25 ------------- .../net/ethernet/huawei/hinic/hinic_main.c | 4 --- drivers/net/ethernet/huawei/hinic/hinic_rx.c | 2 +- drivers/net/ethernet/huawei/hinic/hinic_rx.h | 2 -- .../net/ethernet/huawei/hinic/hinic_sriov.c | 15 ++++---- .../net/ethernet/huawei/hinic/hinic_sriov.h | 2 -- drivers/net/ethernet/huawei/hinic/hinic_tx.c | 6 ++-- drivers/net/ethernet/huawei/hinic/hinic_tx.h | 2 -- 22 files changed, 23 insertions(+), 147 deletions(-) -- 2.17.1

3 years, 2 months

2
11
0 0

[PATCH net-next,v3 00/18] refactor duplicate codes in the qdisc class walk function

by Zhengchao Shao

The walk implementation of most qdisc class modules is basically the same. That is, the values of count and skip are checked first. If count is greater than or equal to skip, the registered fn function is executed. Otherwise, increase the value of count. So the code can be refactored. The walk function is invoked during dump. Therefore, test cases related to the tdc filter need to be added. Last, thanks to Victor and Toke for their review. Add test cases locally and perform the test. The test results are listed below: ./tdc.py -c cake ok 1 1212 - Create CAKE with default setting ok 2 3281 - Create CAKE with bandwidth limit ok 3 c940 - Create CAKE with autorate-ingress flag ok 4 2310 - Create CAKE with rtt time ok 5 2385 - Create CAKE with besteffort flag ok 6 a032 - Create CAKE with diffserv8 flag ok 7 2349 - Create CAKE with diffserv4 flag ok 8 8472 - Create CAKE with flowblind flag ok 9 2341 - Create CAKE with dsthost and nat flag ok 10 5134 - Create CAKE with wash flag ok 11 2302 - Create CAKE with flowblind and no-split-gso flag ok 12 0768 - Create CAKE with dual-srchost and ack-filter flag ok 13 0238 - Create CAKE with dual-dsthost and ack-filter-aggressive flag ok 14 6572 - Create CAKE with memlimit and ptm flag ok 15 2436 - Create CAKE with fwmark and atm flag ok 16 3984 - Create CAKE with overhead and mpu ok 17 5421 - Create CAKE with conservative and ingress flag ok 18 6854 - Delete CAKE with conservative and ingress flag ok 19 2342 - Replace CAKE with mpu ok 20 2313 - Change CAKE with mpu ok 21 4365 - Show CAKE class ./tdc.py -c cbq ok 1 3460 - Create CBQ with default setting ok 2 0592 - Create CBQ with mpu ok 3 4684 - Create CBQ with valid cell num ok 4 4345 - Create CBQ with invalid cell num ok 5 4525 - Create CBQ with valid ewma ok 6 6784 - Create CBQ with invalid ewma ok 7 5468 - Delete CBQ with handle ok 8 492a - Show CBQ class ./tdc.py -c cbs ok 1 1820 - Create CBS with default setting ok 2 1532 - Create CBS with hicredit setting ok 3 2078 - Create CBS with locredit setting ok 4 9271 - Create CBS with sendslope setting ok 5 0482 - Create CBS with idleslope setting ok 6 e8f3 - Create CBS with multiple setting ok 7 23c9 - Replace CBS with sendslope setting ok 8 a07a - Change CBS with idleslope setting ok 9 43b3 - Delete CBS with handle ok 10 9472 - Show CBS class ./tdc.py -c drr ok 1 0385 - Create DRR with default setting ok 2 2375 - Delete DRR with handle ok 3 3092 - Show DRR class ./tdc.py -c dsmark ok 1 6345 - Create DSMARK with default setting ok 2 3462 - Create DSMARK with default_index setting ok 3 ca95 - Create DSMARK with set_tc_index flag ok 4 a950 - Create DSMARK with multiple setting ok 5 4092 - Delete DSMARK with handle ok 6 5930 - Show DSMARK class ./tdc.py -c fq_codel ok 1 4957 - Create FQ_CODEL with default setting ok 2 7621 - Create FQ_CODEL with limit setting ok 3 6871 - Create FQ_CODEL with memory_limit setting ok 4 5636 - Create FQ_CODEL with target setting ok 5 630a - Create FQ_CODEL with interval setting ok 6 4324 - Create FQ_CODEL with quantum setting ok 7 b190 - Create FQ_CODEL with noecn flag ok 8 5381 - Create FQ_CODEL with ce_threshold setting ok 9 c9d2 - Create FQ_CODEL with drop_batch setting ok 10 523b - Create FQ_CODEL with multiple setting ok 11 9283 - Replace FQ_CODEL with noecn setting ok 12 3459 - Change FQ_CODEL with limit setting ok 13 0128 - Delete FQ_CODEL with handle ok 14 0435 - Show FQ_CODEL class ./tdc.py -c hfsc ok 1 3254 - Create HFSC with default setting ok 2 0289 - Create HFSC with class sc and ul rate setting ok 3 846a - Create HFSC with class sc umax and dmax setting ok 4 5413 - Create HFSC with class rt and ls rate setting ok 5 9312 - Create HFSC with class rt umax and dmax setting ok 6 6931 - Delete HFSC with handle ok 7 8436 - Show HFSC class ./tdc.py -c htb ok 1 0904 - Create HTB with default setting ok 2 3906 - Create HTB with default-N setting ok 3 8492 - Create HTB with r2q setting ok 4 9502 - Create HTB with direct_qlen setting ok 5 b924 - Create HTB with class rate and burst setting ok 6 4359 - Create HTB with class mpu setting ok 7 9048 - Create HTB with class prio setting ok 8 4994 - Create HTB with class ceil setting ok 9 9523 - Create HTB with class cburst setting ok 10 5353 - Create HTB with class mtu setting ok 11 346a - Create HTB with class quantum setting ok 12 303a - Delete HTB with handle ./tdc.py -c mqprio ok 1 9903 - Add mqprio Qdisc to multi-queue device (8 queues) ok 2 453a - Delete nonexistent mqprio Qdisc ok 3 5292 - Delete mqprio Qdisc twice ok 4 45a9 - Add mqprio Qdisc to single-queue device ok 5 2ba9 - Show mqprio class ./tdc.py -c multiq ok 1 20ba - Add multiq Qdisc to multi-queue device (8 queues) ok 2 4301 - List multiq Class ok 3 7832 - Delete nonexistent multiq Qdisc ok 4 2891 - Delete multiq Qdisc twice ok 5 1329 - Add multiq Qdisc to single-queue device ./tdc.py -c netem ok 1 cb28 - Create NETEM with default setting ok 2 a089 - Create NETEM with limit flag ok 3 3449 - Create NETEM with delay time ok 4 3782 - Create NETEM with distribution and corrupt flag ok 5 2b82 - Create NETEM with distribution and duplicate flag ok 6 a932 - Create NETEM with distribution and loss flag ok 7 e01a - Create NETEM with distribution and loss state flag ok 8 ba29 - Create NETEM with loss gemodel flag ok 9 0492 - Create NETEM with reorder flag ok 10 7862 - Create NETEM with rate limit ok 11 7235 - Create NETEM with multiple slot rate ok 12 5439 - Create NETEM with multiple slot setting ok 13 5029 - Change NETEM with loss state ok 14 3785 - Replace NETEM with delay time ok 15 4502 - Delete NETEM with handle ok 16 0785 - Show NETEM class ./tdc.py -c qfq ok 1 0582 - Create QFQ with default setting ok 2 c9a3 - Create QFQ with class weight setting ok 3 8452 - Create QFQ with class maxpkt setting ok 4 d920 - Create QFQ with multiple class setting ok 5 0548 - Delete QFQ with handle ok 6 5901 - Show QFQ class ./tdc.py -e 0521 ok 1 0521 - Show ingress class ./tdc.py -e 1023 ok 1 1023 - Show mq class ./tdc.py -e 2410 ok 1 2410 - Show prio class ./tdc.py -e 290a ok 1 290a - Show RED class --- v3: adjust the order of input parameters, and modify subject prefix of tc-testing v2: change the ID of test case --- Zhengchao Shao (18): net/sched: sch_api: add helper for tc qdisc walker stats dump net/sched: use tc_qdisc_stats_dump() in qdisc selftests/tc-testing: add selftests for cake qdisc selftests/tc-testing: add selftests for cbq qdisc selftests/tc-testing: add selftests for cbs qdisc selftests/tc-testing: add selftests for drr qdisc selftests/tc-testing: add selftests for dsmark qdisc selftests/tc-testing: add selftests for fq_codel qdisc selftests/tc-testing: add selftests for hfsc qdisc selftests/tc-testing: add selftests for htb qdisc selftests/tc-testing: add selftests for mqprio qdisc selftests/tc-testing: add selftests for multiq qdisc selftests/tc-testing: add selftests for netem qdisc selftests/tc-testing: add selftests for qfq qdisc selftests/tc-testing: add show class case for ingress qdisc selftests/tc-testing: add show class case for mq qdisc selftests/tc-testing: add show class case for prio qdisc selftests/tc-testing: add show class case for red qdisc include/net/pkt_sched.h | 13 + net/sched/sch_atm.c | 6 +- net/sched/sch_cake.c | 9 +- net/sched/sch_cbq.c | 9 +- net/sched/sch_cbs.c | 8 +- net/sched/sch_drr.c | 9 +- net/sched/sch_dsmark.c | 14 +- net/sched/sch_ets.c | 9 +- net/sched/sch_fq_codel.c | 8 +- net/sched/sch_hfsc.c | 9 +- net/sched/sch_htb.c | 9 +- net/sched/sch_mq.c | 5 +- net/sched/sch_mqprio.c | 5 +- net/sched/sch_multiq.c | 9 +- net/sched/sch_netem.c | 8 +- net/sched/sch_prio.c | 9 +- net/sched/sch_qfq.c | 9 +- net/sched/sch_red.c | 7 +- net/sched/sch_sfb.c | 7 +- net/sched/sch_sfq.c | 8 +- net/sched/sch_skbprio.c | 9 +- net/sched/sch_taprio.c | 5 +- net/sched/sch_tbf.c | 7 +- .../tc-testing/tc-tests/qdiscs/cake.json | 487 ++++++++++++++++++ .../tc-testing/tc-tests/qdiscs/cbq.json | 184 +++++++ .../tc-testing/tc-tests/qdiscs/cbs.json | 234 +++++++++ .../tc-testing/tc-tests/qdiscs/drr.json | 71 +++ .../tc-testing/tc-tests/qdiscs/dsmark.json | 140 +++++ .../tc-testing/tc-tests/qdiscs/fq_codel.json | 326 ++++++++++++ .../tc-testing/tc-tests/qdiscs/hfsc.json | 167 ++++++ .../tc-testing/tc-tests/qdiscs/htb.json | 285 ++++++++++ .../tc-testing/tc-tests/qdiscs/ingress.json | 20 + .../tc-testing/tc-tests/qdiscs/mq.json | 24 +- .../tc-testing/tc-tests/qdiscs/mqprio.json | 114 ++++ .../tc-testing/tc-tests/qdiscs/multiq.json | 114 ++++ .../tc-testing/tc-tests/qdiscs/netem.json | 372 +++++++++++++ .../tc-testing/tc-tests/qdiscs/prio.json | 20 + .../tc-testing/tc-tests/qdiscs/qfq.json | 145 ++++++ .../tc-testing/tc-tests/qdiscs/red.json | 23 + 39 files changed, 2769 insertions(+), 148 deletions(-) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/cake.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/cbq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/cbs.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/drr.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/dsmark.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq_codel.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hfsc.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/htb.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/mqprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/multiq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/netem.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/qfq.json -- 2.17.1

3 years, 2 months

2
1
0 0

[PATCH] kselftest/arm64: Fix typo in hwcap check

by Mark Brown

We use a local variable hwcap to refer to the element of the hwcaps array which we are currently checking. When checking for the relevant hwcap bit being set in testing we were dereferencing hwcaps rather than hwcap in fetching the AT_HWCAP to use, which is perfectly valid C but means we were always checking the bit was set in the hwcap for whichever feature is first in the array. Remove the stray s. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/arm64/abi/hwcap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/arm64/abi/hwcap.c b/tools/testing/selftests/arm64/abi/hwcap.c index 322d9b92bbe3..75eb470eb432 100644 --- a/tools/testing/selftests/arm64/abi/hwcap.c +++ b/tools/testing/selftests/arm64/abi/hwcap.c @@ -307,7 +307,7 @@ int main(void) for (i = 0; i < ARRAY_SIZE(hwcaps); i++) { hwcap = &hwcaps[i]; - have_hwcap = getauxval(hwcaps->at_hwcap) & hwcap->hwcap_bit; + have_hwcap = getauxval(hwcap->at_hwcap) & hwcap->hwcap_bit; have_cpuinfo = cpuinfo_present(hwcap->cpuinfo); if (have_hwcap) -- 2.30.2

3 years, 2 months

2
1
0 0

[PATCH v2 2/4] selftests/x86/mxcsr: Test the MXCSR state write via ptrace

by Chang S. Bae

The ptrace buffer is in the non-compacted format. The MXCSR state should be written to the target thread when either SSE or AVX component is enabled. Write an MXCSR value to the target and read back. Then it is validated with the XRSTOR/XSAVE result on the current. Signed-off-by: Chang S. Bae <chang.seok.bae(a)intel.com> Cc: x86(a)kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-kselftest(a)vger.kernel.org --- If this is acceptable, I will also follow up to move some of the helper functions to a .h file from this and other test cases because duplicating what is shareable should be avoided. --- tools/testing/selftests/x86/Makefile | 2 +- tools/testing/selftests/x86/mxcsr.c | 200 +++++++++++++++++++++++++++ 2 files changed, 201 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/x86/mxcsr.c diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile index 0388c4d60af0..621c47960be3 100644 --- a/tools/testing/selftests/x86/Makefile +++ b/tools/testing/selftests/x86/Makefile @@ -13,7 +13,7 @@ CAN_BUILD_WITH_NOPIE := $(shell ./check_cc.sh "$(CC)" trivial_program.c -no-pie) TARGETS_C_BOTHBITS := single_step_syscall sysret_ss_attrs syscall_nt test_mremap_vdso \ check_initial_reg_state sigreturn iopl ioperm \ test_vsyscall mov_ss_trap \ - syscall_arg_fault fsgsbase_restore sigaltstack + syscall_arg_fault fsgsbase_restore sigaltstack mxcsr TARGETS_C_32BIT_ONLY := entry_from_vm86 test_syscall_vdso unwind_vdso \ test_FCMOV test_FCOMI test_FISTTP \ vdso_restorer diff --git a/tools/testing/selftests/x86/mxcsr.c b/tools/testing/selftests/x86/mxcsr.c new file mode 100644 index 000000000000..7c318c48b4be --- /dev/null +++ b/tools/testing/selftests/x86/mxcsr.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0 + +#define _GNU_SOURCE +#include <err.h> +#include <elf.h> +#include <stdbool.h> +#include <stdio.h> +#include <string.h> +#include <unistd.h> +#include <x86intrin.h> + +#include <sys/ptrace.h> +#include <sys/syscall.h> +#include <sys/wait.h> +#include <sys/uio.h> + +#include "../kselftest.h" /* For __cpuid_count() */ + +#define LEGACY_STATE_SIZE 24 +#define MXCSR_SIZE 8 +#define STSTATE_SIZE 8*16 +#define XMM_SIZE 16*16 +#define PADDING_SIZE 96 +#define XSAVE_HDR_SIZE 64 + +struct xsave_buffer { + uint8_t legacy_state[LEGACY_STATE_SIZE]; + uint8_t mxcsr[MXCSR_SIZE]; + uint8_t st_state[STSTATE_SIZE]; + uint8_t xmm_state[XMM_SIZE]; + uint8_t padding[PADDING_SIZE]; + uint8_t header[XSAVE_HDR_SIZE]; + uint8_t extended[0]; +}; + +#ifdef __x86_64__ +#define REX_PREFIX "0x48, " +#else +#define REX_PREFIX +#endif + +#define XSAVE ".byte " REX_PREFIX "0x0f,0xae,0x27" +#define XRSTOR ".byte " REX_PREFIX "0x0f,0xae,0x2f" + +static inline uint64_t xgetbv(uint32_t index) +{ + uint32_t eax, edx; + + asm volatile("xgetbv" + : "=a" (eax), "=d" (edx) + : "c" (index)); + return eax + ((uint64_t)edx << 32); +} + +static inline void xsave(struct xsave_buffer *xbuf, uint64_t rfbm) +{ + uint32_t rfbm_lo = rfbm; + uint32_t rfbm_hi = rfbm >> 32; + + asm volatile(XSAVE :: "D" (xbuf), "a" (rfbm_lo), "d" (rfbm_hi) : "memory"); +} + +static inline void xrstor(struct xsave_buffer *xbuf, uint64_t rfbm) +{ + uint32_t rfbm_lo = rfbm; + uint32_t rfbm_hi = rfbm >> 32; + + asm volatile(XRSTOR :: "D" (xbuf), "a" (rfbm_lo), "d" (rfbm_hi)); +} + +static inline void clear_xstate_header(struct xsave_buffer *xbuf) +{ + memset(&xbuf->header, 0, sizeof(xbuf->header)); +} + +static inline uint32_t get_mxcsr(struct xsave_buffer *xbuf) +{ + return *((uint32_t *)xbuf->mxcsr); +} + +static inline void set_mxcsr(struct xsave_buffer *xbuf, uint32_t val) +{ + *((uint32_t *)xbuf->mxcsr) = val; +} + +#define XFEATURE_MASK_SSE 0x2 +#define XFEATURE_MASK_YMM 0x4 + +#define CPUID_LEAF1_ECX_XSAVE_MASK (1 << 26) +#define CPUID_LEAF1_ECX_OSXSAVE_MASK (1 << 27) +#define CPUID_LEAF_XSTATE 0xd +#define CPUID_SUBLEAF_XSTATE_USER 0x0 +#define CPUID_SUBLEAF_XSTATE_EXT 0x1 + +static bool xsave_availability(void) +{ + uint32_t eax, ebx, ecx, edx; + + __cpuid_count(1, 0, eax, ebx, ecx, edx); + if (!(ecx & CPUID_LEAF1_ECX_XSAVE_MASK)) + return false; + if (!(ecx & CPUID_LEAF1_ECX_OSXSAVE_MASK)) + return false; + return true; +} + +static uint32_t get_xbuf_size(void) +{ + uint32_t eax, ebx, ecx, edx; + + __cpuid_count(CPUID_LEAF_XSTATE, CPUID_SUBLEAF_XSTATE_USER, + eax, ebx, ecx, edx); + return ebx; +} + +static void ptrace_get(pid_t pid, struct iovec *iov) +{ + memset(iov->iov_base, 0, iov->iov_len); + + if (ptrace(PTRACE_GETREGSET, pid, (uint32_t)NT_X86_XSTATE, iov)) + err(1, "TRACE_GETREGSET"); +} + +static void ptrace_set(pid_t pid, struct iovec *iov) +{ + if (ptrace(PTRACE_SETREGSET, pid, (uint32_t)NT_X86_XSTATE, iov)) + err(1, "TRACE_SETREGSET"); +} + +int main(void) +{ + struct xsave_buffer *xbuf; + uint32_t xbuf_size; + struct iovec iov; + uint32_t mxcsr; + pid_t child; + int status; + + if (!xsave_availability()) + printf("[SKIP]\tSkip as XSAVE not available.\n"); + + xbuf_size = get_xbuf_size(); + if (!xbuf_size) + printf("[SKIP]\tSkip as XSAVE not available.\n"); + + if (!(xgetbv(0) & (XFEATURE_MASK_SSE | XFEATURE_MASK_YMM))) + printf("[SKIP]\tSkip as SSE state not available.\n"); + + xbuf = aligned_alloc(64, xbuf_size); + if (!xbuf) + err(1, "aligned_alloc()"); + + iov.iov_base = xbuf; + iov.iov_len = xbuf_size; + + child = fork(); + if (child < 0) { + err(1, "fork()"); + } else if (!child) { + if (ptrace(PTRACE_TRACEME, 0, NULL, NULL)) + err(1, "PTRACE_TRACEME"); + + raise(SIGTRAP); + _exit(0); + } + + wait(&status); + + if (WSTOPSIG(status) != SIGTRAP) + err(1, "raise(SIGTRAP)"); + + printf("[RUN]\tTest the MXCSR state write via ptrace().\n"); + + /* Set a benign value */ + set_mxcsr(xbuf, 0xabc); + /* The MXCSR state should be loaded regardless of XSTATE_BV */ + clear_xstate_header(xbuf); + + /* Write the MXCSR state both locally and remotely. */ + xrstor(xbuf, XFEATURE_MASK_SSE); + ptrace_set(child, &iov); + + /* Read the MXCSR state back for both */ + xsave(xbuf, XFEATURE_MASK_SSE); + mxcsr = get_mxcsr(xbuf); + ptrace_get(child, &iov); + + /* Cross-check with each other */ + if (mxcsr == get_mxcsr(xbuf)) + printf("[OK]\tThe written state was read back correctly.\n"); + else + printf("[FAIL]\tThe write (or read) was incorrect.\n"); + + ptrace(PTRACE_DETACH, child, NULL, NULL); + wait(&status); + if (!WIFEXITED(status) || WEXITSTATUS(status)) + err(1, "PTRACE_DETACH"); + + free(xbuf); +} -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH v4 0/4] arm64/sme: ptrace support for TPIDR2_EL0

by Mark Brown

When SME was initially merged we did not add support for TPIDR2_EL0 to the ptrace interface, creating difficulties for debuggers in accessing lazy save state for ZA. This series implements that support, extending the existing NT_ARM_TLS regset to support the register when available, and adds kselftest coverage for the existing and new NT_ARM_TLS functionality. Existing programs that query the size of the register set will be able to observe the increased size of the register set. Programs that assume the register set is single register will see no change. On systems that do not support SME TPIDR2_EL0 will read as 0 and writes will be ignored, support for SME should be queried via hwcaps as normal. v4: - Rebase onto v6.0-rc3. v3: - Fix copyright date on test program. v2: - Rebase onto v6.0-rc1. Mark Brown (4): kselftest/arm64: Add test coverage for NT_ARM_TLS arm64/ptrace: Document extension of NT_ARM_TLS to cover TPIDR2_EL0 arm64/ptrace: Support access to TPIDR2_EL0 kselftest/arm64: Add coverage of TPIDR2_EL0 ptrace interface Documentation/arm64/sme.rst | 3 + arch/arm64/kernel/ptrace.c | 25 +- tools/testing/selftests/arm64/abi/.gitignore | 1 + tools/testing/selftests/arm64/abi/Makefile | 2 +- tools/testing/selftests/arm64/abi/ptrace.c | 241 +++++++++++++++++++ 5 files changed, 266 insertions(+), 6 deletions(-) create mode 100644 tools/testing/selftests/arm64/abi/ptrace.c base-commit: b90cb1053190353cc30f0fef0ef1f378ccc063c5 -- 2.30.2

3 years, 2 months

3
9
0 0

[PATCH linux-next] kunit: tool: use absolute path for wget

by cgel.zte＠gmail.com

From: Xu Panda <xu.panda(a)zte.com.cn> Not using absolute path when invoking wget can lead to serious security issues. Reported-by: Zeal Robot <zealci(a)zte.com.cn> Signed-off-by: Xu Panda <xu.panda(a)zte.com.cn> --- tools/testing/kunit/qemu_configs/riscv.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/kunit/qemu_configs/riscv.py b/tools/testing/kunit/qemu_configs/riscv.py index 6207be146d26..c3dcd654ca15 100644 --- a/tools/testing/kunit/qemu_configs/riscv.py +++ b/tools/testing/kunit/qemu_configs/riscv.py @@ -11,7 +11,7 @@ if not os.path.isfile(OPENSBI_FILE): 'Would you like me to download it for you from:\n' + GITHUB_OPENSBI_URL + ' ?\n') response = input('yes/[no]: ') if response.strip() == 'yes': - os.system('wget ' + GITHUB_OPENSBI_URL) + os.system('/usr/bin/wget ' + GITHUB_OPENSBI_URL) else: sys.exit() -- 2.15.2

3 years, 2 months

3
4
0 0

[PATCH 0/3] fix error when writing negative value to simple attribute files

by Akinobu Mita

The simple attribute files do not accept a negative value since the commit 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()"), but some attribute files want to accept a negative value. Akinobu Mita (3): libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value lib/notifier-error-inject: fix error when writing -errno to debugfs file debugfs: fix error when writing negative value to atomic_t debugfs file .../fault-injection/fault-injection.rst | 10 +++---- fs/debugfs/file.c | 28 +++++++++++++++---- fs/libfs.c | 22 +++++++++++++-- include/linux/debugfs.h | 19 +++++++++++-- include/linux/fs.h | 12 ++++++-- lib/notifier-error-inject.c | 2 +- 6 files changed, 73 insertions(+), 20 deletions(-) -- 2.34.1

3 years, 2 months

4
8
0 0

[PATCH v17 00/12] bpf: Add kfuncs for PKCS#7 signature verification

by Roberto Sassu

From: Roberto Sassu <roberto.sassu(a)huawei.com> One of the desirable features in security is the ability to restrict import of data to a given system based on data authenticity. If data import can be restricted, it would be possible to enforce a system-wide policy based on the signing keys the system owner trusts. This feature is widely used in the kernel. For example, if the restriction is enabled, kernel modules can be plugged in only if they are signed with a key whose public part is in the primary or secondary keyring. For eBPF, it can be useful as well. For example, it might be useful to authenticate data an eBPF program makes security decisions on. After a discussion in the eBPF mailing list, it was decided that the stated goal should be accomplished by introducing four new kfuncs: bpf_lookup_user_key() and bpf_lookup_system_key(), for retrieving a keyring with keys trusted for signature verification, respectively from its serial and from a pre-determined ID; bpf_key_put(), to release the reference obtained with the former two kfuncs, bpf_verify_pkcs7_signature(), for verifying PKCS#7 signatures. Other than the key serial, bpf_lookup_user_key() also accepts key lookup flags, that influence the behavior of the lookup. bpf_lookup_system_key() accepts pre-determined IDs defined in include/linux/verification.h. bpf_key_put() accepts the new bpf_key structure, introduced to tell whether the other structure member, a key pointer, is valid or not. The reason is that verify_pkcs7_signature() also accepts invalid pointers, set with the pre-determined ID, to select a system-defined keyring. key_put() must be called only for valid key pointers. Since the two key lookup functions allocate memory and one increments a key reference count, they must be used in conjunction with bpf_key_put(). The latter must be called only if the lookup functions returned a non-NULL pointer. The verifier denies the execution of eBPF programs that don't respect this rule. The two key lookup functions should be used in alternative, depending on the use case. While bpf_lookup_user_key() provides great flexibility, it seems suboptimal in terms of security guarantees, as even if the eBPF program is assumed to be trusted, the serial used to obtain the key pointer might come from untrusted user space not choosing one that the system administrator approves to enforce a mandatory policy. bpf_lookup_system_key() instead provides much stronger guarantees, especially if the pre-determined ID is not passed by user space but is hardcoded in the eBPF program, and that program is signed. In this case, bpf_verify_pkcs7_signature() will always perform signature verification with a key that the system administrator approves, i.e. the primary, secondary or platform keyring. Nevertheless, key permission checks need to be done accurately. Since bpf_lookup_user_key() cannot determine how a key will be used by other kfuncs, it has to defer the permission check to the actual kfunc using the key. It does it by calling lookup_user_key() with KEY_DEFER_PERM_CHECK as needed permission. Later, bpf_verify_pkcs7_signature(), if called, completes the permission check by calling key_validate(). It does not need to call key_task_permission() with permission KEY_NEED_SEARCH, as it is already done elsewhere by the key subsystem. Future kfuncs using the bpf_key structure need to implement the proper checks as well. Finally, the last kfunc, bpf_verify_pkcs7_signature(), accepts the data and signature to verify as eBPF dynamic pointers, to minimize the number of kfunc parameters, and the keyring with keys for signature verification as a bpf_key structure, returned by one of the two key lookup functions. bpf_lookup_user_key() and bpf_verify_pkcs7_signature() can be called only from sleepable programs, because of memory allocation and crypto operations. For example, the lsm.s/bpf attach point is suitable, fexit/array_map_update_elem is not. The correctness of implementation of the new kfuncs and of their usage is checked with the introduced tests. The patch set includes a patch from another author (dependency) for sake of completeness. It is organized as follows. Patch 1 from KP Singh allows kfuncs to be used by LSM programs. Patch 2 splits is_dynptr_reg_valid_init() and introduces is_dynptr_type_expected(), to know more precisely the cause of a negative result of a dynamic pointer check. Patch 3 allows dynamic pointers to be used as kfunc parameters. Patch 4 exports bpf_dynptr_get_size(), to obtain the real size of data carried by a dynamic pointer. Patch 5 makes available for new eBPF kfuncs and programs some key-related definitions. Patch 6 introduces the bpf_lookup_*_key() and bpf_key_put() kfuncs. Patch 7 introduces the bpf_verify_pkcs7_signature() kfunc. Patch 8 changes the testing kernel configuration to compile everything as built-in. Finally, patches 9-12 introduce the tests. Changelog v16: - Remove comments in include/linux/key.h for KEY_LOOKUP_* - Change kmalloc() flag from GFP_ATOMIC to GFP_KERNEL in bpf_lookup_user_key(), as the kfunc needs anyway to be sleepable (suggested by Kumar) - Test passing a dynamic pointer with NULL data to bpf_verify_pkcs7_signature() (suggested by Kumar) v15: - Add kfunc_dynptr_param test to deny list for s390x v14: - Explain that is_dynptr_type_expected() will be useful also for BTF (suggested by Joanne) - Rename KEY_LOOKUP_FLAGS_ALL to KEY_LOOKUP_ALL (suggested by Jarkko) - Swap declaration of spi and dynptr_type in is_dynptr_type_expected() (suggested by Joanne) - Reimplement kfunc dynptr tests with a regular eBPF program instead of executing them with test_verifier (suggested by Joanne) - Make key lookup flags as enum so that they are automatically exported through BTF (suggested by Alexei) v13: - Split is_dynptr_reg_valid_init() and introduce is_dynptr_type_expected() to see if the dynamic pointer type passed as argument to a kfunc is supported (suggested by Kumar) - Add forward declaration of struct key in include/linux/bpf.h (suggested by Song) - Declare mask for key lookup flags, remove key_lookup_flags_check() (suggested by Jarkko and KP) - Allow only certain dynamic pointer types (currently, local) to be passed as argument to kfuncs (suggested by Kumar) - For each dynamic pointer parameter in kfunc, additionally check if the passed pointer is to the stack (suggested by Kumar) - Split the validity/initialization and dynamic pointer type check also in the verifier, and adjust the expected error message in the test (a test for an unexpected dynptr type passed to a helper cannot be added due to missing suitable helpers, but this case has been tested manually) - Add verifier tests to check the dynamic pointers passed as argument to kfuncs (suggested by Kumar) v12: - Put lookup_key and verify_pkcs7_sig tests in deny list for s390x (JIT does not support calling kernel function) v11: - Move stringify_struct() macro to include/linux/btf.h (suggested by Daniel) - Change kernel configuration options in tools/testing/selftests/bpf/config* from =m to =y v10: - Introduce key_lookup_flags_check() and system_keyring_id_check() inline functions to check parameters (suggested by KP) - Fix descriptions and comment of key-related kfuncs (suggested by KP) - Register kfunc set only once (suggested by Alexei) - Move needed kernel options to the architecture-independent configuration for testing v9: - Drop patch to introduce KF_SLEEPABLE kfunc flag (already merged) - Rename valid_ptr member of bpf_key to has_ref (suggested by Daniel) - Check dynamic pointers in kfunc definition with bpf_dynptr_kern struct definition instead of string, to detect structure renames (suggested by Daniel) - Explicitly say that we permit initialized dynamic pointers in kfunc definition (suggested by Daniel) - Remove noinline __weak from kfuncs definition (reported by Daniel) - Simplify key lookup flags check in bpf_lookup_user_key() (suggested by Daniel) - Explain the reason for deferring key permission check (suggested by Daniel) - Allocate memory with GFP_ATOMIC in bpf_lookup_system_key(), and remove KF_SLEEPABLE kfunc flag from kfunc declaration (suggested by Daniel) - Define only one kfunc set and remove the loop for registration (suggested by Alexei) v8: - Define the new bpf_key structure to carry the key pointer and whether that pointer is valid or not (suggested by Daniel) - Drop patch to mark a kfunc parameter with the __maybe_null suffix - Improve documentation of kfuncs - Introduce bpf_lookup_system_key() to obtain a key pointer suitable for verify_pkcs7_signature() (suggested by Daniel) - Use the new kfunc registration API - Drop patch to test the __maybe_null suffix - Add tests for bpf_lookup_system_key() v7: - Add support for using dynamic and NULL pointers in kfunc (suggested by Alexei) - Add new kfunc-related tests v6: - Switch back to key lookup helpers + signature verification (until v5), and defer permission check from bpf_lookup_user_key() to bpf_verify_pkcs7_signature() - Add additional key lookup test to illustrate the usage of the KEY_LOOKUP_CREATE flag and validate the flags (suggested by Daniel) - Make description of flags of bpf_lookup_user_key() more user-friendly (suggested by Daniel) - Fix validation of flags parameter in bpf_lookup_user_key() (reported by Daniel) - Rename bpf_verify_pkcs7_signature() keyring-related parameters to user_keyring and system_keyring to make their purpose more clear - Accept keyring-related parameters of bpf_verify_pkcs7_signature() as alternatives (suggested by KP) - Replace unsigned long type with u64 in helper declaration (suggested by Daniel) - Extend the bpf_verify_pkcs7_signature() test by calling the helper without data, by ensuring that the helper enforces the keyring-related parameters as alternatives, by ensuring that the helper rejects inaccessible and expired keyrings, and by checking all system keyrings - Move bpf_lookup_user_key() and bpf_key_put() usage tests to ref_tracking.c (suggested by John) - Call bpf_lookup_user_key() and bpf_key_put() only in sleepable programs v5: - Move KEY_LOOKUP_ to include/linux/key.h for validation of bpf_verify_pkcs7_signature() parameter - Remove bpf_lookup_user_key() and bpf_key_put() helpers, and the corresponding tests - Replace struct key parameter of bpf_verify_pkcs7_signature() with the keyring serial and lookup flags - Call lookup_user_key() and key_put() in bpf_verify_pkcs7_signature() code, to ensure that the retrieved key is used according to the permission requested at lookup time - Clarified keyring precedence in the description of bpf_verify_pkcs7_signature() (suggested by John) - Remove newline in the second argument of ASSERT_ - Fix helper prototype regular expression in bpf_doc.py v4: - Remove bpf_request_key_by_id(), don't return an invalid pointer that other helpers can use - Pass the keyring ID (without ULONG_MAX, suggested by Alexei) to bpf_verify_pkcs7_signature() - Introduce bpf_lookup_user_key() and bpf_key_put() helpers (suggested by Alexei) - Add lookup_key_norelease test, to ensure that the verifier blocks eBPF programs which don't decrement the key reference count - Parse raw PKCS#7 signature instead of module-style signature in the verify_pkcs7_signature test (suggested by Alexei) - Parse kernel module in user space and pass raw PKCS#7 signature to the eBPF program for signature verification v3: - Rename bpf_verify_signature() back to bpf_verify_pkcs7_signature() to avoid managing different parameters for each signature verification function in one helper (suggested by Daniel) - Use dynamic pointers and export bpf_dynptr_get_size() (suggested by Alexei) - Introduce bpf_request_key_by_id() to give more flexibility to the caller of bpf_verify_pkcs7_signature() to retrieve the appropriate keyring (suggested by Alexei) - Fix test by reordering the gcc command line, always compile sign-file - Improve helper support check mechanism in the test v2: - Rename bpf_verify_pkcs7_signature() to a more generic bpf_verify_signature() and pass the signature type (suggested by KP) - Move the helper and prototype declaration under #ifdef so that user space can probe for support for the helper (suggested by Daniel) - Describe better the keyring types (suggested by Daniel) - Include linux/bpf.h instead of vmlinux.h to avoid implicit or redeclaration - Make the test selfcontained (suggested by Alexei) v1: - Don't define new map flag but introduce simple wrapper of verify_pkcs7_signature() (suggested by Alexei and KP) KP Singh (1): bpf: Allow kfuncs to be used in LSM programs Roberto Sassu (11): bpf: Move dynptr type check to is_dynptr_type_expected() btf: Allow dynamic pointer parameters in kfuncs bpf: Export bpf_dynptr_get_size() KEYS: Move KEY_LOOKUP_ to include/linux/key.h and define KEY_LOOKUP_ALL bpf: Add bpf_lookup_*_key() and bpf_key_put() kfuncs bpf: Add bpf_verify_pkcs7_signature() kfunc selftests/bpf: Compile kernel with everything as built-in selftests/bpf: Add verifier tests for bpf_lookup_*_key() and bpf_key_put() selftests/bpf: Add additional tests for bpf_lookup_*_key() selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfunc selftests/bpf: Add tests for dynamic pointers parameters in kfuncs include/linux/bpf.h | 9 + include/linux/bpf_verifier.h | 5 + include/linux/btf.h | 9 + include/linux/key.h | 6 + include/linux/verification.h | 8 + kernel/bpf/btf.c | 34 ++ kernel/bpf/helpers.c | 2 +- kernel/bpf/verifier.c | 35 +- kernel/trace/bpf_trace.c | 180 ++++++++ security/keys/internal.h | 2 - tools/testing/selftests/bpf/DENYLIST.s390x | 3 + tools/testing/selftests/bpf/Makefile | 14 +- tools/testing/selftests/bpf/config | 32 +- tools/testing/selftests/bpf/config.x86_64 | 7 +- .../testing/selftests/bpf/prog_tests/dynptr.c | 2 +- .../bpf/prog_tests/kfunc_dynptr_param.c | 164 +++++++ .../selftests/bpf/prog_tests/lookup_key.c | 112 +++++ .../bpf/prog_tests/verify_pkcs7_sig.c | 399 ++++++++++++++++++ .../bpf/progs/test_kfunc_dynptr_param.c | 99 +++++ .../selftests/bpf/progs/test_lookup_key.c | 46 ++ .../bpf/progs/test_verify_pkcs7_sig.c | 100 +++++ tools/testing/selftests/bpf/test_verifier.c | 3 +- .../selftests/bpf/verifier/ref_tracking.c | 139 ++++++ .../testing/selftests/bpf/verify_sig_setup.sh | 104 +++++ 24 files changed, 1479 insertions(+), 35 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/kfunc_dynptr_param.c create mode 100644 tools/testing/selftests/bpf/prog_tests/lookup_key.c create mode 100644 tools/testing/selftests/bpf/prog_tests/verify_pkcs7_sig.c create mode 100644 tools/testing/selftests/bpf/progs/test_kfunc_dynptr_param.c create mode 100644 tools/testing/selftests/bpf/progs/test_lookup_key.c create mode 100644 tools/testing/selftests/bpf/progs/test_verify_pkcs7_sig.c create mode 100755 tools/testing/selftests/bpf/verify_sig_setup.sh -- 2.25.1

3 years, 2 months

6
24
0 0

[PATCH v18 00/13] bpf: Add kfuncs for PKCS#7 signature verification

by Roberto Sassu

From: Roberto Sassu <roberto.sassu(a)huawei.com> One of the desirable features in security is the ability to restrict import of data to a given system based on data authenticity. If data import can be restricted, it would be possible to enforce a system-wide policy based on the signing keys the system owner trusts. This feature is widely used in the kernel. For example, if the restriction is enabled, kernel modules can be plugged in only if they are signed with a key whose public part is in the primary or secondary keyring. For eBPF, it can be useful as well. For example, it might be useful to authenticate data an eBPF program makes security decisions on. After a discussion in the eBPF mailing list, it was decided that the stated goal should be accomplished by introducing four new kfuncs: bpf_lookup_user_key() and bpf_lookup_system_key(), for retrieving a keyring with keys trusted for signature verification, respectively from its serial and from a pre-determined ID; bpf_key_put(), to release the reference obtained with the former two kfuncs, bpf_verify_pkcs7_signature(), for verifying PKCS#7 signatures. Other than the key serial, bpf_lookup_user_key() also accepts key lookup flags, that influence the behavior of the lookup. bpf_lookup_system_key() accepts pre-determined IDs defined in include/linux/verification.h. bpf_key_put() accepts the new bpf_key structure, introduced to tell whether the other structure member, a key pointer, is valid or not. The reason is that verify_pkcs7_signature() also accepts invalid pointers, set with the pre-determined ID, to select a system-defined keyring. key_put() must be called only for valid key pointers. Since the two key lookup functions allocate memory and one increments a key reference count, they must be used in conjunction with bpf_key_put(). The latter must be called only if the lookup functions returned a non-NULL pointer. The verifier denies the execution of eBPF programs that don't respect this rule. The two key lookup functions should be used in alternative, depending on the use case. While bpf_lookup_user_key() provides great flexibility, it seems suboptimal in terms of security guarantees, as even if the eBPF program is assumed to be trusted, the serial used to obtain the key pointer might come from untrusted user space not choosing one that the system administrator approves to enforce a mandatory policy. bpf_lookup_system_key() instead provides much stronger guarantees, especially if the pre-determined ID is not passed by user space but is hardcoded in the eBPF program, and that program is signed. In this case, bpf_verify_pkcs7_signature() will always perform signature verification with a key that the system administrator approves, i.e. the primary, secondary or platform keyring. Nevertheless, key permission checks need to be done accurately. Since bpf_lookup_user_key() cannot determine how a key will be used by other kfuncs, it has to defer the permission check to the actual kfunc using the key. It does it by calling lookup_user_key() with KEY_DEFER_PERM_CHECK as needed permission. Later, bpf_verify_pkcs7_signature(), if called, completes the permission check by calling key_validate(). It does not need to call key_task_permission() with permission KEY_NEED_SEARCH, as it is already done elsewhere by the key subsystem. Future kfuncs using the bpf_key structure need to implement the proper checks as well. Finally, the last kfunc, bpf_verify_pkcs7_signature(), accepts the data and signature to verify as eBPF dynamic pointers, to minimize the number of kfunc parameters, and the keyring with keys for signature verification as a bpf_key structure, returned by one of the two key lookup functions. bpf_lookup_user_key() and bpf_verify_pkcs7_signature() can be called only from sleepable programs, because of memory allocation and crypto operations. For example, the lsm.s/bpf attach point is suitable, fexit/array_map_update_elem is not. The correctness of implementation of the new kfuncs and of their usage is checked with the introduced tests. The patch set includes a patch from another author (dependency) for sake of completeness. It is organized as follows. Patch 1 from KP Singh allows kfuncs to be used by LSM programs. Patch 2 exports the bpf_dynptr definition through BTF. Patch 3 splits is_dynptr_reg_valid_init() and introduces is_dynptr_type_expected(), to know more precisely the cause of a negative result of a dynamic pointer check. Patch 4 allows dynamic pointers to be used as kfunc parameters. Patch 5 exports bpf_dynptr_get_size(), to obtain the real size of data carried by a dynamic pointer. Patch 6 makes available for new eBPF kfuncs and programs some key-related definitions. Patch 7 introduces the bpf_lookup_*_key() and bpf_key_put() kfuncs. Patch 8 introduces the bpf_verify_pkcs7_signature() kfunc. Patch 9 changes the testing kernel configuration to compile everything as built-in. Finally, patches 10-13 introduce the tests. Changelog v17: - Remove unnecessary typedefs in test_verify_pkcs7_sig.c (suggested by KP) - Add patch to export bpf_dynptr through BTF (reported by KP) - Rename u{8,16,32,64} variables to __u{8,16,32,64} in the tests, for consistency with other eBPF programs (suggested by Yonghong) v16: - Remove comments in include/linux/key.h for KEY_LOOKUP_* - Change kmalloc() flag from GFP_ATOMIC to GFP_KERNEL in bpf_lookup_user_key(), as the kfunc needs anyway to be sleepable (suggested by Kumar) - Test passing a dynamic pointer with NULL data to bpf_verify_pkcs7_signature() (suggested by Kumar) v15: - Add kfunc_dynptr_param test to deny list for s390x v14: - Explain that is_dynptr_type_expected() will be useful also for BTF (suggested by Joanne) - Rename KEY_LOOKUP_FLAGS_ALL to KEY_LOOKUP_ALL (suggested by Jarkko) - Swap declaration of spi and dynptr_type in is_dynptr_type_expected() (suggested by Joanne) - Reimplement kfunc dynptr tests with a regular eBPF program instead of executing them with test_verifier (suggested by Joanne) - Make key lookup flags as enum so that they are automatically exported through BTF (suggested by Alexei) v13: - Split is_dynptr_reg_valid_init() and introduce is_dynptr_type_expected() to see if the dynamic pointer type passed as argument to a kfunc is supported (suggested by Kumar) - Add forward declaration of struct key in include/linux/bpf.h (suggested by Song) - Declare mask for key lookup flags, remove key_lookup_flags_check() (suggested by Jarkko and KP) - Allow only certain dynamic pointer types (currently, local) to be passed as argument to kfuncs (suggested by Kumar) - For each dynamic pointer parameter in kfunc, additionally check if the passed pointer is to the stack (suggested by Kumar) - Split the validity/initialization and dynamic pointer type check also in the verifier, and adjust the expected error message in the test (a test for an unexpected dynptr type passed to a helper cannot be added due to missing suitable helpers, but this case has been tested manually) - Add verifier tests to check the dynamic pointers passed as argument to kfuncs (suggested by Kumar) v12: - Put lookup_key and verify_pkcs7_sig tests in deny list for s390x (JIT does not support calling kernel function) v11: - Move stringify_struct() macro to include/linux/btf.h (suggested by Daniel) - Change kernel configuration options in tools/testing/selftests/bpf/config* from =m to =y v10: - Introduce key_lookup_flags_check() and system_keyring_id_check() inline functions to check parameters (suggested by KP) - Fix descriptions and comment of key-related kfuncs (suggested by KP) - Register kfunc set only once (suggested by Alexei) - Move needed kernel options to the architecture-independent configuration for testing v9: - Drop patch to introduce KF_SLEEPABLE kfunc flag (already merged) - Rename valid_ptr member of bpf_key to has_ref (suggested by Daniel) - Check dynamic pointers in kfunc definition with bpf_dynptr_kern struct definition instead of string, to detect structure renames (suggested by Daniel) - Explicitly say that we permit initialized dynamic pointers in kfunc definition (suggested by Daniel) - Remove noinline __weak from kfuncs definition (reported by Daniel) - Simplify key lookup flags check in bpf_lookup_user_key() (suggested by Daniel) - Explain the reason for deferring key permission check (suggested by Daniel) - Allocate memory with GFP_ATOMIC in bpf_lookup_system_key(), and remove KF_SLEEPABLE kfunc flag from kfunc declaration (suggested by Daniel) - Define only one kfunc set and remove the loop for registration (suggested by Alexei) v8: - Define the new bpf_key structure to carry the key pointer and whether that pointer is valid or not (suggested by Daniel) - Drop patch to mark a kfunc parameter with the __maybe_null suffix - Improve documentation of kfuncs - Introduce bpf_lookup_system_key() to obtain a key pointer suitable for verify_pkcs7_signature() (suggested by Daniel) - Use the new kfunc registration API - Drop patch to test the __maybe_null suffix - Add tests for bpf_lookup_system_key() v7: - Add support for using dynamic and NULL pointers in kfunc (suggested by Alexei) - Add new kfunc-related tests v6: - Switch back to key lookup helpers + signature verification (until v5), and defer permission check from bpf_lookup_user_key() to bpf_verify_pkcs7_signature() - Add additional key lookup test to illustrate the usage of the KEY_LOOKUP_CREATE flag and validate the flags (suggested by Daniel) - Make description of flags of bpf_lookup_user_key() more user-friendly (suggested by Daniel) - Fix validation of flags parameter in bpf_lookup_user_key() (reported by Daniel) - Rename bpf_verify_pkcs7_signature() keyring-related parameters to user_keyring and system_keyring to make their purpose more clear - Accept keyring-related parameters of bpf_verify_pkcs7_signature() as alternatives (suggested by KP) - Replace unsigned long type with u64 in helper declaration (suggested by Daniel) - Extend the bpf_verify_pkcs7_signature() test by calling the helper without data, by ensuring that the helper enforces the keyring-related parameters as alternatives, by ensuring that the helper rejects inaccessible and expired keyrings, and by checking all system keyrings - Move bpf_lookup_user_key() and bpf_key_put() usage tests to ref_tracking.c (suggested by John) - Call bpf_lookup_user_key() and bpf_key_put() only in sleepable programs v5: - Move KEY_LOOKUP_ to include/linux/key.h for validation of bpf_verify_pkcs7_signature() parameter - Remove bpf_lookup_user_key() and bpf_key_put() helpers, and the corresponding tests - Replace struct key parameter of bpf_verify_pkcs7_signature() with the keyring serial and lookup flags - Call lookup_user_key() and key_put() in bpf_verify_pkcs7_signature() code, to ensure that the retrieved key is used according to the permission requested at lookup time - Clarified keyring precedence in the description of bpf_verify_pkcs7_signature() (suggested by John) - Remove newline in the second argument of ASSERT_ - Fix helper prototype regular expression in bpf_doc.py v4: - Remove bpf_request_key_by_id(), don't return an invalid pointer that other helpers can use - Pass the keyring ID (without ULONG_MAX, suggested by Alexei) to bpf_verify_pkcs7_signature() - Introduce bpf_lookup_user_key() and bpf_key_put() helpers (suggested by Alexei) - Add lookup_key_norelease test, to ensure that the verifier blocks eBPF programs which don't decrement the key reference count - Parse raw PKCS#7 signature instead of module-style signature in the verify_pkcs7_signature test (suggested by Alexei) - Parse kernel module in user space and pass raw PKCS#7 signature to the eBPF program for signature verification v3: - Rename bpf_verify_signature() back to bpf_verify_pkcs7_signature() to avoid managing different parameters for each signature verification function in one helper (suggested by Daniel) - Use dynamic pointers and export bpf_dynptr_get_size() (suggested by Alexei) - Introduce bpf_request_key_by_id() to give more flexibility to the caller of bpf_verify_pkcs7_signature() to retrieve the appropriate keyring (suggested by Alexei) - Fix test by reordering the gcc command line, always compile sign-file - Improve helper support check mechanism in the test v2: - Rename bpf_verify_pkcs7_signature() to a more generic bpf_verify_signature() and pass the signature type (suggested by KP) - Move the helper and prototype declaration under #ifdef so that user space can probe for support for the helper (suggested by Daniel) - Describe better the keyring types (suggested by Daniel) - Include linux/bpf.h instead of vmlinux.h to avoid implicit or redeclaration - Make the test selfcontained (suggested by Alexei) v1: - Don't define new map flag but introduce simple wrapper of verify_pkcs7_signature() (suggested by Alexei and KP) KP Singh (1): bpf: Allow kfuncs to be used in LSM programs Roberto Sassu (12): btf: Export bpf_dynptr definition bpf: Move dynptr type check to is_dynptr_type_expected() btf: Allow dynamic pointer parameters in kfuncs bpf: Export bpf_dynptr_get_size() KEYS: Move KEY_LOOKUP_ to include/linux/key.h and define KEY_LOOKUP_ALL bpf: Add bpf_lookup_*_key() and bpf_key_put() kfuncs bpf: Add bpf_verify_pkcs7_signature() kfunc selftests/bpf: Compile kernel with everything as built-in selftests/bpf: Add verifier tests for bpf_lookup_*_key() and bpf_key_put() selftests/bpf: Add additional tests for bpf_lookup_*_key() selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfunc selftests/bpf: Add tests for dynamic pointers parameters in kfuncs include/linux/bpf.h | 9 + include/linux/bpf_verifier.h | 5 + include/linux/btf.h | 9 + include/linux/key.h | 6 + include/linux/verification.h | 8 + kernel/bpf/btf.c | 34 ++ kernel/bpf/helpers.c | 4 +- kernel/bpf/verifier.c | 35 +- kernel/trace/bpf_trace.c | 180 ++++++++ security/keys/internal.h | 2 - tools/testing/selftests/bpf/DENYLIST.s390x | 3 + tools/testing/selftests/bpf/Makefile | 14 +- tools/testing/selftests/bpf/config | 32 +- tools/testing/selftests/bpf/config.x86_64 | 7 +- .../testing/selftests/bpf/prog_tests/dynptr.c | 2 +- .../bpf/prog_tests/kfunc_dynptr_param.c | 164 +++++++ .../selftests/bpf/prog_tests/lookup_key.c | 112 +++++ .../bpf/prog_tests/verify_pkcs7_sig.c | 399 ++++++++++++++++++ .../bpf/progs/test_kfunc_dynptr_param.c | 94 +++++ .../selftests/bpf/progs/test_lookup_key.c | 46 ++ .../bpf/progs/test_verify_pkcs7_sig.c | 90 ++++ tools/testing/selftests/bpf/test_verifier.c | 3 +- .../selftests/bpf/verifier/ref_tracking.c | 139 ++++++ .../testing/selftests/bpf/verify_sig_setup.sh | 104 +++++ 24 files changed, 1466 insertions(+), 35 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/kfunc_dynptr_param.c create mode 100644 tools/testing/selftests/bpf/prog_tests/lookup_key.c create mode 100644 tools/testing/selftests/bpf/prog_tests/verify_pkcs7_sig.c create mode 100644 tools/testing/selftests/bpf/progs/test_kfunc_dynptr_param.c create mode 100644 tools/testing/selftests/bpf/progs/test_lookup_key.c create mode 100644 tools/testing/selftests/bpf/progs/test_verify_pkcs7_sig.c create mode 100755 tools/testing/selftests/bpf/verify_sig_setup.sh -- 2.25.1

3 years, 2 months

3
15
0 0

[PATCH v2] selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle

by Stefan Berger

The following output can bee seen when the test is executed: test_flush_context (tpm2_tests.SpaceTest) ... \ /usr/lib64/python3.6/unittest/case.py:605: ResourceWarning: \ unclosed file <_io.FileIO name='/dev/tpmrm0' mode='rb+' closefd=True> An instance of Client does not implicitly close /dev/tpm* handle, once it gets destroyed. Close the file handle in the class destructor Client.__del__(). Fixes: 6ea3dfe1e0732 ("selftests: add TPM 2.0 tests") Cc: Shuah Khan <shuah(a)kernel.org> Cc: linux-kselftest(a)vger.kernel.org Cc: Jarkko Sakkinen <jarkko(a)kernel.org> Signed-off-by: Stefan Berger <stefanb(a)linux.ibm.com> --- tools/testing/selftests/tpm2/tpm2.py | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/testing/selftests/tpm2/tpm2.py b/tools/testing/selftests/tpm2/tpm2.py index 057a4f49c79d..c7363c6764fc 100644 --- a/tools/testing/selftests/tpm2/tpm2.py +++ b/tools/testing/selftests/tpm2/tpm2.py @@ -371,6 +371,10 @@ class Client: fcntl.fcntl(self.tpm, fcntl.F_SETFL, flags) self.tpm_poll = select.poll() + def __del__(self): + if self.tpm: + self.tpm.close() + def close(self): self.tpm.close() -- 2.36.1

3 years, 2 months

2
1
0 0

BUG: sleeping function called from invalid context at arch/arm64/mm/fault.c:593

by Naresh Kamboju

[Please ignore this email if it is already reported] Following kernel warning and BUG have been found while running kselftests gpio test case on arm64 Raspberry Pi 4 Model B device running 6.0.0-rc5. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> crash log: [ 53.796405] kselftest: Running tests in gpio TAP version 13 1..2 # selftests: gpio: gpio-mockup.sh # 1. Module load tests # 1.1. dynamic allocation of gpio [ 55.416786] [ 55.418311] ============================= [ 55.422371] WARNING: suspicious RCU usage [ 55.426431] 6.0.0-rc5 #1 Not tainted [ 55.430052] ----------------------------- [ 55.434112] kernel/sched/core.c:9854 Illegal context switch in RCU-bh read-side critical section! [ 55.443108] [ 55.443108] other info that might help us debug this: [ 55.443108] [ 55.451222] [ 55.451222] rcu_scheduler_active = 2, debug_locks = 1 [ 55.457839] 1 lock held by modprobe/563: [ 55.461812] #0: ffff00004cf450f8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x50/0x290 [ 55.471632] [ 55.471632] stack backtrace: [ 55.476046] CPU: 2 PID: 563 Comm: modprobe Not tainted 6.0.0-rc5 #1 [ 55.482401] Hardware name: Raspberry Pi 4 Model B (DT) [ 55.487607] Call trace: [ 55.490079] dump_backtrace+0xe4/0x130 [ 55.493879] show_stack+0x30/0x70 [ 55.497235] dump_stack_lvl+0x8c/0xb8 [ 55.500947] dump_stack+0x18/0x34 [ 55.504303] lockdep_rcu_suspicious+0xf8/0x10c [ 55.508806] __might_resched+0xd0/0x240 [ 55.512694] __might_sleep+0x58/0xb0 [ 55.516316] do_page_fault+0x244/0x4d0 [ 55.520116] do_translation_fault+0xd8/0x100 [ 55.524443] do_mem_abort+0x58/0xb0 [ 55.527979] el1_abort+0x44/0x70 [ 55.531248] el1h_64_sync_handler+0xa4/0xd0 [ 55.535487] el1h_64_sync+0x64/0x68 [ 55.539020] __lock_acquire+0x53c/0x2040 [ 55.542995] lock_acquire.part.0+0xe8/0x24c [ 55.547233] lock_acquire+0x84/0xa0 [ 55.550766] down_write+0x60/0xc4 [ 55.554123] simple_recursive_removal+0x58/0x290 [ 55.558803] debugfs_remove+0x5c/0x80 [ 55.562516] gpio_mockup_debugfs_cleanup+0x24/0x34 [gpio_mockup] [ 55.568614] devm_action_release+0x24/0x3c [ 55.572764] release_nodes+0x64/0x9c [ 55.576384] devres_release_all+0x94/0xec [ 55.580447] device_unbind_cleanup+0x24/0x74 [ 55.584773] device_release_driver_internal+0x240/0x290 [ 55.590070] driver_detach+0x5c/0xf0 [ 55.593691] bus_remove_driver+0x6c/0x10c [ 55.597753] driver_unregister+0x38/0x6c [ 55.601728] platform_driver_unregister+0x24/0x34 [ 55.606497] gpio_mockup_exit+0x24/0x20c [gpio_mockup] [ 55.611707] __arm64_sys_delete_module+0x184/0x2f0 [ 55.616562] invoke_syscall+0x8c/0x120 [ 55.620362] el0_svc_common.constprop.0+0x104/0x124 [ 55.625307] do_el0_svc+0x44/0xc0 [ 55.628664] el0_svc+0x48/0xc0 [ 55.631757] el0t_64_sync_handler+0xbc/0x140 [ 55.636084] el0t_64_sync+0x18c/0x190 [ 55.639793] [ 55.641298] ============================= [ 55.645356] WARNING: suspicious RCU usage [ 55.649417] 6.0.0-rc5 #1 Not tainted [ 55.653037] ----------------------------- [ 55.657096] kernel/sched/core.c:9854 Illegal context switch in RCU-sched read-side critical section! [ 55.666356] [ 55.666356] other info that might help us debug this: [ 55.666356] [ 55.674469] [ 55.674469] rcu_scheduler_active = 2, debug_locks = 1 [ 55.681084] 1 lock held by modprobe/563: [ 55.685057] #0: ffff00004cf450f8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x50/0x290 [ 55.694863] [ 55.694863] stack backtrace: [ 55.699275] CPU: 2 PID: 563 Comm: modprobe Not tainted 6.0.0-rc5 #1 [ 55.705628] Hardware name: Raspberry Pi 4 Model B (DT) [ 55.710834] Call trace: [ 55.713306] dump_backtrace+0xe4/0x130 [ 55.717103] show_stack+0x30/0x70 [ 55.720459] dump_stack_lvl+0x8c/0xb8 [ 55.724170] dump_stack+0x18/0x34 [ 55.727526] lockdep_rcu_suspicious+0xf8/0x10c [ 55.732029] __might_resched+0x214/0x240 [ 55.736003] __might_sleep+0x58/0xb0 [ 55.739625] do_page_fault+0x244/0x4d0 [ 55.743424] do_translation_fault+0xd8/0x100 [ 55.747751] do_mem_abort+0x58/0xb0 [ 55.751286] el1_abort+0x44/0x70 [ 55.754556] el1h_64_sync_handler+0xa4/0xd0 [ 55.758794] el1h_64_sync+0x64/0x68 [ 55.762326] __lock_acquire+0x53c/0x2040 [ 55.766301] lock_acquire.part.0+0xe8/0x24c [ 55.770538] lock_acquire+0x84/0xa0 [ 55.774072] down_write+0x60/0xc4 [ 55.777428] simple_recursive_removal+0x58/0x290 [ 55.782107] debugfs_remove+0x5c/0x80 [ 55.785818] gpio_mockup_debugfs_cleanup+0x24/0x34 [gpio_mockup] [ 55.791911] devm_action_release+0x24/0x3c [ 55.796061] release_nodes+0x64/0x9c [ 55.799682] devres_release_all+0x94/0xec [ 55.803743] device_unbind_cleanup+0x24/0x74 [ 55.808070] device_release_driver_internal+0x240/0x290 [ 55.813367] driver_detach+0x5c/0xf0 [ 55.816988] bus_remove_driver+0x6c/0x10c [ 55.821050] driver_unregister+0x38/0x6c [ 55.825025] platform_driver_unregister+0x24/0x34 [ 55.829793] gpio_mockup_exit+0x24/0x20c [gpio_mockup] [ 55.835002] __arm64_sys_delete_module+0x184/0x2f0 [ 55.839858] invoke_syscall+0x8c/0x120 [ 55.843657] el0_svc_common.constprop.0+0x104/0x124 [ 55.848602] do_el0_svc+0x44/0xc0 [ 55.851958] el0_svc+0x48/0xc0 [ 55.855051] el0t_64_sync_handler+0xbc/0x140 [ 55.859378] el0t_64_sync+0x18c/0x190 [ 55.863087] BUG: sleeping function called from invalid context at arch/arm64/mm/fault.c:593 [ 55.871554] in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 563, name: modprobe [ 55.879757] preempt_count: 0, expected: 0 [ 55.883816] RCU nest depth: 0, expected: 0 [ 55.887965] 1 lock held by modprobe/563: [ 55.891936] #0: ffff00004cf450f8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x50/0x290 [ 55.901743] irq event stamp: 10213 [ 55.905185] hardirqs last enabled at (10213): [<ffff8000096e2e74>] _raw_spin_unlock_irqrestore+0x84/0xa0 [ 55.914888] hardirqs last disabled at (10212): [<ffff8000096e3314>] _raw_spin_lock_irqsave+0xa4/0xb0 [ 55.924151] softirqs last enabled at (9742): [<ffff800008010be4>] __do_softirq+0x514/0x62c [ 55.932618] softirqs last disabled at (9737): [<ffff8000080b4768>] __irq_exit_rcu+0x164/0x19c [ 55.941265] CPU: 2 PID: 563 Comm: modprobe Not tainted 6.0.0-rc5 #1 [ 55.947618] Hardware name: Raspberry Pi 4 Model B (DT) [ 55.952823] Call trace: [ 55.955296] dump_backtrace+0xe4/0x130 [ 55.959093] show_stack+0x30/0x70 [ 55.962448] dump_stack_lvl+0x8c/0xb8 [ 55.966159] dump_stack+0x18/0x34 [ 55.969515] __might_resched+0x1c4/0x240 [ 55.973490] __might_sleep+0x58/0xb0 [ 55.977111] do_page_fault+0x244/0x4d0 [ 55.980910] do_translation_fault+0xd8/0x100 [ 55.985238] do_mem_abort+0x58/0xb0 [ 55.988774] el1_abort+0x44/0x70 [ 55.992043] el1h_64_sync_handler+0xa4/0xd0 [ 55.996281] el1h_64_sync+0x64/0x68 [ 55.999814] __lock_acquire+0x53c/0x2040 [ 56.003789] lock_acquire.part.0+0xe8/0x24c [ 56.008028] lock_acquire+0x84/0xa0 [ 56.011560] down_write+0x60/0xc4 [ 56.014916] simple_recursive_removal+0x58/0x290 [ 56.019594] debugfs_remove+0x5c/0x80 [ 56.023306] gpio_mockup_debugfs_cleanup+0x24/0x34 [gpio_mockup] [ 56.029400] devm_action_release+0x24/0x3c [ 56.033549] release_nodes+0x64/0x9c [ 56.037170] devres_release_all+0x94/0xec [ 56.041232] device_unbind_cleanup+0x24/0x74 [ 56.045559] device_release_driver_internal+0x240/0x290 [ 56.050855] driver_detach+0x5c/0xf0 [ 56.054477] bus_remove_driver+0x6c/0x10c [ 56.058539] driver_unregister+0x38/0x6c [ 56.062513] platform_driver_unregister+0x24/0x34 [ 56.067281] gpio_mockup_exit+0x24/0x20c [gpio_mockup] [ 56.072490] __arm64_sys_delete_module+0x184/0x2f0 [ 56.077346] invoke_syscall+0x8c/0x120 [ 56.081145] el0_svc_common.constprop.0+0x104/0x124 [ 56.086089] do_el0_svc+0x44/0xc0 [ 56.089446] el0_svc+0x48/0xc0 [ 56.092539] el0t_64_sync_handler+0xbc/0x140 [ 56.096866] el0t_64_sync+0x18c/0x190 [ 56.100584] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000150 [ 56.109495] Mem abort info: [ 56.112320] ESR = 0x0000000096000006 [ 56.116116] EC = 0x25: DABT (current EL), IL = 32 bits [ 56.121499] SET = 0, FnV = 0 [ 56.124589] EA = 0, S1PTW = 0 [ 56.127767] FSC = 0x06: level 2 translation fault [ 56.132708] Data abort info: [ 56.135622] ISV = 0, ISS = 0x00000006 [ 56.139505] CM = 0, WnR = 0 [ 56.142506] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004adb5000 [ 56.149035] [0000000000000150] pgd=08000000469d2003, p4d=08000000469d2003, pud=0800000046b70003, pmd=0000000000000000 [ 56.159807] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 56.165455] Modules linked in: gpio_mockup(-) algif_hash aes_neon_bs aes_neon_blk xhci_pci raspberrypi_cpufreq snd_soc_hdmi_codec xhci_pci_renesas brcmfmac brcmutil hci_uart btqca btbcm cfg80211 bluetooth reset_raspberrypi crct10dif_ce clk_raspberrypi raspberrypi_hwmon rfkill iproc_rng200 pwm_bcm2835 v3d rng_core i2c_bcm2835 drm_shmem_helper vc4 bcm2711_thermal cec drm_display_helper drm_cma_helper gpu_sched pcie_brcmstb drm_kms_helper fuse drm [ 56.205467] CPU: 2 PID: 563 Comm: modprobe Tainted: G W 6.0.0-rc5 #1 [ 56.213318] Hardware name: Raspberry Pi 4 Model B (DT) [ 56.218523] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 56.225582] pc : __lock_acquire+0x53c/0x2040 [ 56.229910] lr : lock_acquire.part.0+0xe8/0x24c [ 56.234499] sp : ffff80000d03b8a0 [ 56.237852] x29: ffff80000d03b8a0 x28: ffff800008456678 x27: 0000000000000000 [ 56.245091] x26: ffff800008456678 x25: 0000000000000150 x24: 0000000000000000 [ 56.252329] x23: ffff00004c200040 x22: 0000000000000000 x21: 0000000000000001 [ 56.259567] x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000 [ 56.266804] x17: ffff800008b93ed0 x16: 0000000000000000 x15: 0000000000000028 [ 56.274041] x14: 000000000004ffff x13: ffff80000b40dd00 x12: ffff80000802cff8 [ 56.281279] x11: ffff80000b40d840 x10: ffff80000802cdfc x9 : 0000000100000000 [ 56.288517] x8 : ffff00004c200040 x7 : ffff800008456678 x6 : 0000000000000000 [ 56.295755] x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 [ 56.302992] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff80000aeb6000 [ 56.310230] Call trace: [ 56.312701] __lock_acquire+0x53c/0x2040 [ 56.316674] lock_acquire.part.0+0xe8/0x24c [ 56.320911] lock_acquire+0x84/0xa0 [ 56.324444] down_write+0x60/0xc4 [ 56.327799] simple_recursive_removal+0x58/0x290 [ 56.332477] debugfs_remove+0x5c/0x80 [ 56.336186] gpio_mockup_debugfs_cleanup+0x24/0x34 [gpio_mockup] [ 56.342276] devm_action_release+0x24/0x3c [ 56.346425] release_nodes+0x64/0x9c [ 56.350043] devres_release_all+0x94/0xec [ 56.354104] device_unbind_cleanup+0x24/0x74 [ 56.358430] device_release_driver_internal+0x240/0x290 [ 56.363725] driver_detach+0x5c/0xf0 [ 56.367346] bus_remove_driver+0x6c/0x10c [ 56.371407] driver_unregister+0x38/0x6c [ 56.375380] platform_driver_unregister+0x24/0x34 [ 56.380147] gpio_mockup_exit+0x24/0x20c [gpio_mockup] [ 56.385356] __arm64_sys_delete_module+0x184/0x2f0 [ 56.390211] invoke_syscall+0x8c/0x120 [ 56.394009] el0_svc_common.constprop.0+0x104/0x124 [ 56.398952] do_el0_svc+0x44/0xc0 [ 56.402308] el0_svc+0x48/0xc0 [ 56.405400] el0t_64_sync_handler+0xbc/0x140 [ 56.409725] el0t_64_sync+0x18c/0x190 [ 56.413435] Code: 6b01001f 54002668 a94573fb 1400003d (f9400321) [ 56.419613] ---[ end trace 0000000000000000 ]--- Full test log, https://lkft.validation.linaro.org/scheduler/job/5528616#L1360 metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/torvalds/linux-mainline git_sha: 3245cb65fd91cd514801bf91f5a3066d562f0ac4 git_describe: v6.0-rc5-25-g3245cb65fd91 kernel_version: 6.0.0-rc5 kernel-config: https://builds.tuxbuild.com/2EkryDJF2MJ3zNyYOYb016CJbRv/config vmlinux.xz: https://builds.tuxbuild.com/2EkryDJF2MJ3zNyYOYb016CJbRv/vmlinux.xz System.map: https://builds.tuxbuild.com/2EkryDJF2MJ3zNyYOYb016CJbRv/System.map build-url: https://gitlab.com/Linaro/lkft/mirrors/torvalds/linux-mainline/-/pipelines/… artifact-location: https://builds.tuxbuild.com/2EkryDJF2MJ3zNyYOYb016CJbRv toolchain: gcc-11 -- Linaro LKFT https://lkft.linaro.org

3 years, 2 months

2
1
0 0

[PATCH net-next,v3 01/18] net/sched: sch_api: add helper for tc qdisc walker stats dump

by Zhengchao Shao

The walk implementation of most qdisc class modules is basically the same. That is, the values of count and skip are checked first. If count is greater than or equal to skip, the registered fn function is executed. Otherwise, increase the value of count. So we can reconstruct them. Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- include/net/pkt_sched.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h index 29f65632ebc5..2ff80cd04c5c 100644 --- a/include/net/pkt_sched.h +++ b/include/net/pkt_sched.h @@ -222,4 +222,17 @@ static inline struct tc_skb_cb *tc_skb_cb(const struct sk_buff *skb) return cb; } +static inline bool tc_qdisc_stats_dump(struct Qdisc *sch, + unsigned long cl, + struct qdisc_walker *arg) +{ + if (arg->count >= arg->skip && arg->fn(sch, cl, arg) < 0) { + arg->stop = 1; + return false; + } + + arg->count++; + return true; +} + #endif -- 2.17.1

3 years, 2 months

2
1
0 0

[PATCH net-next,v3 02/18] net/sched: use tc_qdisc_stats_dump() in qdisc

by Zhengchao Shao

use tc_qdisc_stats_dump() in qdisc. Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- net/sched/sch_atm.c | 6 +----- net/sched/sch_cake.c | 9 +++------ net/sched/sch_cbq.c | 9 +-------- net/sched/sch_cbs.c | 8 +------- net/sched/sch_drr.c | 9 +-------- net/sched/sch_dsmark.c | 14 +++++--------- net/sched/sch_ets.c | 9 +-------- net/sched/sch_fq_codel.c | 8 ++------ net/sched/sch_hfsc.c | 9 +-------- net/sched/sch_htb.c | 9 +-------- net/sched/sch_mq.c | 5 +---- net/sched/sch_mqprio.c | 5 +---- net/sched/sch_multiq.c | 9 +-------- net/sched/sch_netem.c | 8 ++------ net/sched/sch_prio.c | 9 +-------- net/sched/sch_qfq.c | 9 +-------- net/sched/sch_red.c | 7 +------ net/sched/sch_sfb.c | 7 +------ net/sched/sch_sfq.c | 8 ++------ net/sched/sch_skbprio.c | 9 +-------- net/sched/sch_taprio.c | 5 +---- net/sched/sch_tbf.c | 7 +------ 22 files changed, 31 insertions(+), 147 deletions(-) diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 816fd0d7ba38..f52255fea652 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -354,12 +354,8 @@ static void atm_tc_walk(struct Qdisc *sch, struct qdisc_walker *walker) if (walker->stop) return; list_for_each_entry(flow, &p->flows, list) { - if (walker->count >= walker->skip && - walker->fn(sch, (unsigned long)flow, walker) < 0) { - walker->stop = 1; + if (!tc_qdisc_stats_dump(sch, (unsigned long)flow, walker)) break; - } - walker->count++; } } diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c index 36acc95d611e..55c6879d2c7e 100644 --- a/net/sched/sch_cake.c +++ b/net/sched/sch_cake.c @@ -3061,16 +3061,13 @@ static void cake_walk(struct Qdisc *sch, struct qdisc_walker *arg) struct cake_tin_data *b = &q->tins[q->tin_order[i]]; for (j = 0; j < CAKE_QUEUES; j++) { - if (list_empty(&b->flows[j].flowchain) || - arg->count < arg->skip) { + if (list_empty(&b->flows[j].flowchain)) { arg->count++; continue; } - if (arg->fn(sch, i * CAKE_QUEUES + j + 1, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, i * CAKE_QUEUES + j + 1, + arg)) break; - } - arg->count++; } } } diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index ba99ce05cd52..6568e17c4c63 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -1676,15 +1676,8 @@ static void cbq_walk(struct Qdisc *sch, struct qdisc_walker *arg) for (h = 0; h < q->clhash.hashsize; h++) { hlist_for_each_entry(cl, &q->clhash.hash[h], common.hnode) { - if (arg->count < arg->skip) { - arg->count++; - continue; - } - if (arg->fn(sch, (unsigned long)cl, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, (unsigned long)cl, arg)) return; - } - arg->count++; } } } diff --git a/net/sched/sch_cbs.c b/net/sched/sch_cbs.c index 459cc240eda9..cac870eb7897 100644 --- a/net/sched/sch_cbs.c +++ b/net/sched/sch_cbs.c @@ -520,13 +520,7 @@ static unsigned long cbs_find(struct Qdisc *sch, u32 classid) static void cbs_walk(struct Qdisc *sch, struct qdisc_walker *walker) { if (!walker->stop) { - if (walker->count >= walker->skip) { - if (walker->fn(sch, 1, walker) < 0) { - walker->stop = 1; - return; - } - } - walker->count++; + tc_qdisc_stats_dump(sch, 1, walker); } } diff --git a/net/sched/sch_drr.c b/net/sched/sch_drr.c index 4e5b1cf11b85..e35a4e90f4e6 100644 --- a/net/sched/sch_drr.c +++ b/net/sched/sch_drr.c @@ -284,15 +284,8 @@ static void drr_walk(struct Qdisc *sch, struct qdisc_walker *arg) for (i = 0; i < q->clhash.hashsize; i++) { hlist_for_each_entry(cl, &q->clhash.hash[i], common.hnode) { - if (arg->count < arg->skip) { - arg->count++; - continue; - } - if (arg->fn(sch, (unsigned long)cl, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, (unsigned long)cl, arg)) return; - } - arg->count++; } } } diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c index 7da6dc38a382..401ffaf87d62 100644 --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -176,16 +176,12 @@ static void dsmark_walk(struct Qdisc *sch, struct qdisc_walker *walker) return; for (i = 0; i < p->indices; i++) { - if (p->mv[i].mask == 0xff && !p->mv[i].value) - goto ignore; - if (walker->count >= walker->skip) { - if (walker->fn(sch, i + 1, walker) < 0) { - walker->stop = 1; - break; - } + if (p->mv[i].mask == 0xff && !p->mv[i].value) { + walker->count++; + continue; } -ignore: - walker->count++; + if (!tc_qdisc_stats_dump(sch, i + 1, walker)) + break; } } diff --git a/net/sched/sch_ets.c b/net/sched/sch_ets.c index a3aea22ef09d..b10efeaf0629 100644 --- a/net/sched/sch_ets.c +++ b/net/sched/sch_ets.c @@ -341,15 +341,8 @@ static void ets_qdisc_walk(struct Qdisc *sch, struct qdisc_walker *arg) return; for (i = 0; i < q->nbands; i++) { - if (arg->count < arg->skip) { - arg->count++; - continue; - } - if (arg->fn(sch, i + 1, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, i + 1, arg)) break; - } - arg->count++; } } diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c index eeea8c6d54e2..99d318b60568 100644 --- a/net/sched/sch_fq_codel.c +++ b/net/sched/sch_fq_codel.c @@ -673,16 +673,12 @@ static void fq_codel_walk(struct Qdisc *sch, struct qdisc_walker *arg) return; for (i = 0; i < q->flows_cnt; i++) { - if (list_empty(&q->flows[i].flowchain) || - arg->count < arg->skip) { + if (list_empty(&q->flows[i].flowchain)) { arg->count++; continue; } - if (arg->fn(sch, i + 1, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, i + 1, arg)) break; - } - arg->count++; } } diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index c8bef923c79c..70b0c5873d32 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1349,15 +1349,8 @@ hfsc_walk(struct Qdisc *sch, struct qdisc_walker *arg) for (i = 0; i < q->clhash.hashsize; i++) { hlist_for_each_entry(cl, &q->clhash.hash[i], cl_common.hnode) { - if (arg->count < arg->skip) { - arg->count++; - continue; - } - if (arg->fn(sch, (unsigned long)cl, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, (unsigned long)cl, arg)) return; - } - arg->count++; } } } diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 78d0c7549c74..e5b4bbf3ce3d 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -2119,15 +2119,8 @@ static void htb_walk(struct Qdisc *sch, struct qdisc_walker *arg) for (i = 0; i < q->clhash.hashsize; i++) { hlist_for_each_entry(cl, &q->clhash.hash[i], common.hnode) { - if (arg->count < arg->skip) { - arg->count++; - continue; - } - if (arg->fn(sch, (unsigned long)cl, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, (unsigned long)cl, arg)) return; - } - arg->count++; } } } diff --git a/net/sched/sch_mq.c b/net/sched/sch_mq.c index 83d2e54bf303..d0bc660d7401 100644 --- a/net/sched/sch_mq.c +++ b/net/sched/sch_mq.c @@ -247,11 +247,8 @@ static void mq_walk(struct Qdisc *sch, struct qdisc_walker *arg) arg->count = arg->skip; for (ntx = arg->skip; ntx < dev->num_tx_queues; ntx++) { - if (arg->fn(sch, ntx + 1, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, ntx + 1, arg)) break; - } - arg->count++; } } diff --git a/net/sched/sch_mqprio.c b/net/sched/sch_mqprio.c index b29f3453c6ea..4c68abaa289b 100644 --- a/net/sched/sch_mqprio.c +++ b/net/sched/sch_mqprio.c @@ -558,11 +558,8 @@ static void mqprio_walk(struct Qdisc *sch, struct qdisc_walker *arg) /* Walk hierarchy with a virtual class per tc */ arg->count = arg->skip; for (ntx = arg->skip; ntx < netdev_get_num_tc(dev); ntx++) { - if (arg->fn(sch, ntx + TC_H_MIN_PRIORITY, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, ntx + TC_H_MIN_PRIORITY, arg)) return; - } - arg->count++; } /* Pad the values and skip over unused traffic classes */ diff --git a/net/sched/sch_multiq.c b/net/sched/sch_multiq.c index f28050c7f12d..75c9c860182b 100644 --- a/net/sched/sch_multiq.c +++ b/net/sched/sch_multiq.c @@ -353,15 +353,8 @@ static void multiq_walk(struct Qdisc *sch, struct qdisc_walker *arg) return; for (band = 0; band < q->bands; band++) { - if (arg->count < arg->skip) { - arg->count++; - continue; - } - if (arg->fn(sch, band + 1, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, band + 1, arg)) break; - } - arg->count++; } } diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index b70ac04110dd..18f4273a835b 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -1251,12 +1251,8 @@ static unsigned long netem_find(struct Qdisc *sch, u32 classid) static void netem_walk(struct Qdisc *sch, struct qdisc_walker *walker) { if (!walker->stop) { - if (walker->count >= walker->skip) - if (walker->fn(sch, 1, walker) < 0) { - walker->stop = 1; - return; - } - walker->count++; + if (!tc_qdisc_stats_dump(sch, 1, walker)) + return; } } diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index 298794c04836..fdc5ef52c3ee 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -376,15 +376,8 @@ static void prio_walk(struct Qdisc *sch, struct qdisc_walker *arg) return; for (prio = 0; prio < q->bands; prio++) { - if (arg->count < arg->skip) { - arg->count++; - continue; - } - if (arg->fn(sch, prio + 1, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, prio + 1, arg)) break; - } - arg->count++; } } diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c index 13246a9dc5c1..cf5ebe43b3b4 100644 --- a/net/sched/sch_qfq.c +++ b/net/sched/sch_qfq.c @@ -659,15 +659,8 @@ static void qfq_walk(struct Qdisc *sch, struct qdisc_walker *arg) for (i = 0; i < q->clhash.hashsize; i++) { hlist_for_each_entry(cl, &q->clhash.hash[i], common.hnode) { - if (arg->count < arg->skip) { - arg->count++; - continue; - } - if (arg->fn(sch, (unsigned long)cl, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, (unsigned long)cl, arg)) return; - } - arg->count++; } } } diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c index 4952406f70b9..a5a401f93c1a 100644 --- a/net/sched/sch_red.c +++ b/net/sched/sch_red.c @@ -516,12 +516,7 @@ static unsigned long red_find(struct Qdisc *sch, u32 classid) static void red_walk(struct Qdisc *sch, struct qdisc_walker *walker) { if (!walker->stop) { - if (walker->count >= walker->skip) - if (walker->fn(sch, 1, walker) < 0) { - walker->stop = 1; - return; - } - walker->count++; + tc_qdisc_stats_dump(sch, 1, walker); } } diff --git a/net/sched/sch_sfb.c b/net/sched/sch_sfb.c index 1be8d04d69dc..e2389fa3cff8 100644 --- a/net/sched/sch_sfb.c +++ b/net/sched/sch_sfb.c @@ -659,12 +659,7 @@ static int sfb_delete(struct Qdisc *sch, unsigned long cl, static void sfb_walk(struct Qdisc *sch, struct qdisc_walker *walker) { if (!walker->stop) { - if (walker->count >= walker->skip) - if (walker->fn(sch, 1, walker) < 0) { - walker->stop = 1; - return; - } - walker->count++; + tc_qdisc_stats_dump(sch, 1, walker); } } diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c index f8e569f79f13..abd436307d6a 100644 --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -888,16 +888,12 @@ static void sfq_walk(struct Qdisc *sch, struct qdisc_walker *arg) return; for (i = 0; i < q->divisor; i++) { - if (q->ht[i] == SFQ_EMPTY_SLOT || - arg->count < arg->skip) { + if (q->ht[i] == SFQ_EMPTY_SLOT) { arg->count++; continue; } - if (arg->fn(sch, i + 1, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, i + 1, arg)) break; - } - arg->count++; } } diff --git a/net/sched/sch_skbprio.c b/net/sched/sch_skbprio.c index df72fb83d9c7..5df2dacb7b1a 100644 --- a/net/sched/sch_skbprio.c +++ b/net/sched/sch_skbprio.c @@ -265,15 +265,8 @@ static void skbprio_walk(struct Qdisc *sch, struct qdisc_walker *arg) return; for (i = 0; i < SKBPRIO_MAX_PRIORITY; i++) { - if (arg->count < arg->skip) { - arg->count++; - continue; - } - if (arg->fn(sch, i + 1, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, i + 1, arg)) break; - } - arg->count++; } } diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c index db88a692ef81..bddc1ed0c56b 100644 --- a/net/sched/sch_taprio.c +++ b/net/sched/sch_taprio.c @@ -2000,11 +2000,8 @@ static void taprio_walk(struct Qdisc *sch, struct qdisc_walker *arg) arg->count = arg->skip; for (ntx = arg->skip; ntx < dev->num_tx_queues; ntx++) { - if (arg->fn(sch, ntx + 1, arg) < 0) { - arg->stop = 1; + if (!tc_qdisc_stats_dump(sch, ntx + 1, arg)) break; - } - arg->count++; } } diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index e031c1a41ea6..277ad11f4d61 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -580,12 +580,7 @@ static unsigned long tbf_find(struct Qdisc *sch, u32 classid) static void tbf_walk(struct Qdisc *sch, struct qdisc_walker *walker) { if (!walker->stop) { - if (walker->count >= walker->skip) - if (walker->fn(sch, 1, walker) < 0) { - walker->stop = 1; - return; - } - walker->count++; + tc_qdisc_stats_dump(sch, 1, walker); } } -- 2.17.1

3 years, 2 months

2
1
0 0

[PATCH net-next,v3 18/18] selftests/tc-testing: add show class case for red qdisc

by Zhengchao Shao

Test 290a: Show RED class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/red.json | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/red.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/red.json index 0703a2a255eb..4b3e449857f2 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/red.json +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/red.json @@ -181,5 +181,28 @@ "$TC qdisc del dev $DUMMY handle 1: root", "$IP link del dev $DUMMY type dummy" ] + }, + { + "id": "290a", + "name": "Show RED class", + "category": [ + "qdisc", + "red" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root red limit 1M avpkt 1500 min 100K max 300K", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class red 1:[0-9]+ parent 1:", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] } ] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 17/18] selftests/tc-testing: add show class case for prio qdisc

by Zhengchao Shao

Test 2410: Show prio class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/prio.json | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/prio.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/prio.json index 3076c02d08d6..8186de2f0dcf 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/prio.json +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/prio.json @@ -272,5 +272,25 @@ "teardown": [ "$IP link del dev $DUMMY type dummy" ] + }, + { + "id": "2410", + "name": "Show prio class", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root prio", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class prio 1:[0-9]+ parent 1:", + "matchCount": "3", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root prio", + "$IP link del dev $DUMMY type dummy" + ] } ] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 16/18] selftests/tc-testing: add show class case for mq qdisc

by Zhengchao Shao

Test 1023: Show mq class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/mq.json | 24 ++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/mq.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/mq.json index c6046096d9db..44fbfc6caec7 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/mq.json +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/mq.json @@ -133,5 +133,27 @@ "teardown": [ "echo \"1\" > /sys/bus/netdevsim/del_device" ] - } + }, + { + "id": "1023", + "name": "Show mq class", + "category": [ + "qdisc", + "mq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo \"1 1 4\" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: mq", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $ETH", + "matchPattern": "class mq 1:[0-9]+ root", + "matchCount": "4", + "teardown": [ + "echo \"1\" > /sys/bus/netdevsim/del_device" + ] + } ] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 15/18] selftests/tc-testing: add show class case for ingress qdisc

by Zhengchao Shao

Test 0521: Show ingress class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/ingress.json | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/ingress.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/ingress.json index d99dba6e2b1a..11d33362408c 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/ingress.json +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/ingress.json @@ -98,5 +98,25 @@ "teardown": [ "$IP link del dev $DUMMY type dummy" ] + }, + { + "id": "0521", + "name": "Show ingress class", + "category": [ + "qdisc", + "ingress" + ], + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY ingress", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class ingress", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY ingress", + "$IP link del dev $DUMMY type dummy" + ] } ] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 14/18] selftests/tc-testing: add selftests for qfq qdisc

by Zhengchao Shao

Test 0582: Create QFQ with default setting Test c9a3: Create QFQ with class weight setting Test 8452: Create QFQ with class maxpkt setting Test d920: Create QFQ with multiple class setting Test 0548: Delete QFQ with handle Test 5901: Show QFQ class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/qfq.json | 145 ++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/qfq.json diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/qfq.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/qfq.json new file mode 100644 index 000000000000..330f1a25e0ab --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/qfq.json @@ -0,0 +1,145 @@ +[ + { + "id": "0582", + "name": "Create QFQ with default setting", + "category": [ + "qdisc", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root qfq", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc qfq 1: root refcnt [0-9]+", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "c9a3", + "name": "Create QFQ with class weight setting", + "category": [ + "qdisc", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root qfq" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 qfq weight 100", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class qfq 1:1 root weight 100 maxpkt", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8452", + "name": "Create QFQ with class maxpkt setting", + "category": [ + "qdisc", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root qfq" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 qfq maxpkt 2000", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class qfq 1:1 root weight 1 maxpkt 2000", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "d920", + "name": "Create QFQ with multiple class setting", + "category": [ + "qdisc", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root qfq", + "$TC class add dev $DUMMY parent 1: classid 1:1 qfq weight 100" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:2 qfq weight 200", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class qfq 1:[0-9]+ root weight [0-9]+00 maxpkt", + "matchCount": "2", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0548", + "name": "Delete QFQ with handle", + "category": [ + "qdisc", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root qfq", + "$TC class add dev $DUMMY parent 1: classid 1:1 qfq weight 100" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "qdisc qfq 1: root refcnt [0-9]+", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5901", + "name": "Show QFQ class", + "category": [ + "qdisc", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root qfq", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class qfq 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 13/18] selftests/tc-testing: add selftests for netem qdisc

by Zhengchao Shao

Test cb28: Create NETEM with default setting Test a089: Create NETEM with limit flag Test 3449: Create NETEM with delay time Test 3782: Create NETEM with distribution and corrupt flag Test 2b82: Create NETEM with distribution and duplicate flag Test a932: Create NETEM with distribution and loss flag Test e01a: Create NETEM with distribution and loss state flag Test ba29: Create NETEM with loss gemodel flag Test 0492: Create NETEM with reorder flag Test 7862: Create NETEM with rate limit Test 7235: Create NETEM with multiple slot rate Test 5439: Create NETEM with multiple slot setting Test 5029: Change NETEM with loss state Test 3785: Replace NETEM with delay time Test 4502: Delete NETEM with handle Test 0785: Show NETEM class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/netem.json | 372 ++++++++++++++++++ 1 file changed, 372 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/netem.json diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/netem.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/netem.json new file mode 100644 index 000000000000..7e41f548f8e8 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/netem.json @@ -0,0 +1,372 @@ +[ + { + "id": "cb28", + "name": "Create NETEM with default setting", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ limit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "a089", + "name": "Create NETEM with limit flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem limit 200", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ limit 200", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3449", + "name": "Create NETEM with delay time", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 100ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3782", + "name": "Create NETEM with distribution and corrupt flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution normal corrupt 1%", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 100ms 10ms corrupt 1%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2b82", + "name": "Create NETEM with distribution and duplicate flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution normal duplicate 1%", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 100ms 10ms duplicate 1%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "a932", + "name": "Create NETEM with distribution and loss flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution pareto loss 1%", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 100ms 10ms loss 1%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "e01a", + "name": "Create NETEM with distribution and loss state flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution paretonormal loss state 1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 100ms 10ms loss state p13 1% p31 99% p32 0% p23 100% p14 0%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "ba29", + "name": "Create NETEM with loss gemodel flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem loss gemodel 1%", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*loss gemodel p 1%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0492", + "name": "Create NETEM with reorder flag", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms reorder 2% gap 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*reorder 2%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7862", + "name": "Create NETEM with rate limit", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem rate 20000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*rate 20Kbit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7235", + "name": "Create NETEM with multiple slot rate", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem slot 10 200 packets 2000 bytes 9000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*slot 10ns 200ns packets 2000 bytes 9000", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5439", + "name": "Create NETEM with multiple slot setting", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem slot distribution pareto 1ms 0.1ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*slot distribution 1ms 100us", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5029", + "name": "Change NETEM with loss state", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution normal loss 1%" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root netem delay 100ms 10ms distribution normal loss 2%", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*loss 2%", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3785", + "name": "Replace NETEM with delay time", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution normal loss 1%" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root netem delay 200ms 10ms", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 200ms 10ms", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4502", + "name": "Delete NETEM with handle", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root netem delay 100ms 10ms distribution normal" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc netem 1: root refcnt [0-9]+ .*delay 100ms 10ms", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0785", + "name": "Show NETEM class", + "category": [ + "qdisc", + "netem" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root netem", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class netem 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 12/18] selftests/tc-testing: add selftests for multiq qdisc

by Zhengchao Shao

Test 20ba: Add multiq Qdisc to multi-queue device (8 queues) Test 4301: List multiq Class Test 7832: Delete nonexistent multiq Qdisc Test 2891: Delete multiq Qdisc twice Test 1329: Add multiq Qdisc to single-queue device Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/multiq.json | 114 ++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/multiq.json diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/multiq.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/multiq.json new file mode 100644 index 000000000000..12c0af7a145d --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/multiq.json @@ -0,0 +1,114 @@ +[ + { + "id": "20ba", + "name": "Add multiq Qdisc to multi-queue device (8 queues)", + "category": [ + "qdisc", + "multiq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo \"1 1 8\" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: multiq", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc multiq 1: root refcnt [0-9]+ bands 8", + "matchCount": "1", + "teardown": [ + "echo \"1\" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "4301", + "name": "List multiq Class", + "category": [ + "qdisc", + "multiq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo \"1 1 8\" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: multiq", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $ETH", + "matchPattern": "class multiq 1:[0-9]+ parent 1:", + "matchCount": "8", + "teardown": [ + "echo \"1\" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "7832", + "name": "Delete nonexistent multiq Qdisc", + "category": [ + "qdisc", + "multiq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo \"1 1 4\" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc del dev $ETH root handle 1: multiq", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc multiq 1: root", + "matchCount": "0", + "teardown": [ + "echo \"1\" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "2891", + "name": "Delete multiq Qdisc twice", + "category": [ + "qdisc", + "multiq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo \"1 1 8\" > /sys/bus/netdevsim/new_device", + "$TC qdisc add dev $ETH root handle 1: multiq", + "$TC qdisc del dev $ETH root handle 1:" + ], + "cmdUnderTest": "$TC qdisc del dev $ETH root handle 1:", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc mqprio 1: root", + "matchCount": "0", + "teardown": [ + "echo \"1\" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "1329", + "name": "Add multiq Qdisc to single-queue device", + "category": [ + "qdisc", + "multiq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo \"1 1\" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: multiq", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc multiq 1: root", + "matchCount": "0", + "teardown": [ + "echo \"1\" > /sys/bus/netdevsim/del_device" + ] + } +] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 11/18] selftests/tc-testing: add selftests for mqprio qdisc

by Zhengchao Shao

Test 9903: Add mqprio Qdisc to multi-queue device (8 queues) Test 453a: Delete nonexistent mqprio Qdisc Test 5292: Delete mqprio Qdisc twice Test 45a9: Add mqprio Qdisc to single-queue device Test 2ba9: Show mqprio class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/mqprio.json | 114 ++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/mqprio.json diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/mqprio.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/mqprio.json new file mode 100644 index 000000000000..6e1973f731e9 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/mqprio.json @@ -0,0 +1,114 @@ +[ + { + "id": "9903", + "name": "Add mqprio Qdisc to multi-queue device (8 queues)", + "category": [ + "qdisc", + "mqprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo \"1 1 8\" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: mqprio num_tc 8 map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc mqprio 1: root tc 8 map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0.*queues:\$0:0\$ \$1:1\$ \$2:2\$ \$3:3\$ \$4:4\$ \$5:5\$ \$6:6\$ \$7:7\$", + "matchCount": "1", + "teardown": [ + "echo \"1\" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "453a", + "name": "Delete nonexistent mqprio Qdisc", + "category": [ + "qdisc", + "mqprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo \"1 1 4\" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc del dev $ETH root handle 1: mqprio", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc mqprio 1: root", + "matchCount": "0", + "teardown": [ + "echo \"1\" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "5292", + "name": "Delete mqprio Qdisc twice", + "category": [ + "qdisc", + "mqprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo \"1 1 8\" > /sys/bus/netdevsim/new_device", + "$TC qdisc add dev $ETH root handle 1: mqprio num_tc 8 map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0", + "$TC qdisc del dev $ETH root handle 1:" + ], + "cmdUnderTest": "$TC qdisc del dev $ETH root handle 1:", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc mqprio 1: root", + "matchCount": "0", + "teardown": [ + "echo \"1\" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "45a9", + "name": "Add mqprio Qdisc to single-queue device", + "category": [ + "qdisc", + "mqprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo \"1 1\" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: mqprio num_tc 8 map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $ETH", + "matchPattern": "qdisc mqprio 1: root", + "matchCount": "0", + "teardown": [ + "echo \"1\" > /sys/bus/netdevsim/del_device" + ] + }, + { + "id": "2ba9", + "name": "Show mqprio class", + "category": [ + "qdisc", + "mqprio" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "echo \"1 1 8\" > /sys/bus/netdevsim/new_device" + ], + "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: mqprio num_tc 8 map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $ETH", + "matchPattern": "class mqprio 1:", + "matchCount": "16", + "teardown": [ + "echo \"1\" > /sys/bus/netdevsim/del_device" + ] + } +] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 10/18] selftests/tc-testing: add selftests for htb qdisc

by Zhengchao Shao

Test 0904: Create HTB with default setting Test 3906: Create HTB with default-N setting Test 8492: Create HTB with r2q setting Test 9502: Create HTB with direct_qlen setting Test b924: Create HTB with class rate and burst setting Test 4359: Create HTB with class mpu setting Test 9048: Create HTB with class prio setting Test 4994: Create HTB with class ceil setting Test 9523: Create HTB with class cburst setting Test 5353: Create HTB with class mtu setting Test 346a: Create HTB with class quantum setting Test 303a: Delete HTB with handle Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/htb.json | 285 ++++++++++++++++++ 1 file changed, 285 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/htb.json diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/htb.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/htb.json new file mode 100644 index 000000000000..9529899482e0 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/htb.json @@ -0,0 +1,285 @@ +[ + { + "id": "0904", + "name": "Create HTB with default setting", + "category": [ + "qdisc", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root htb", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc htb 1: root refcnt [0-9]+ r2q 10 default 0 direct_packets_stat.*direct_qlen", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3906", + "name": "Create HTB with default-N setting", + "category": [ + "qdisc", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root htb default 10", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc htb 1: root refcnt [0-9]+ r2q 10 default 0x10 direct_packets_stat.* direct_qlen", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8492", + "name": "Create HTB with r2q setting", + "category": [ + "qdisc", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root htb r2q 5", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc htb 1: root refcnt [0-9]+ r2q 5 default 0 direct_packets_stat.*direct_qlen", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9502", + "name": "Create HTB with direct_qlen setting", + "category": [ + "qdisc", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root htb direct_qlen 1024", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc htb 1: root refcnt [0-9]+ r2q 10 default 0 direct_packets_stat.*direct_qlen 1024", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "b924", + "name": "Create HTB with class rate and burst setting", + "category": [ + "qdisc", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root htb" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 htb rate 20kbit burst 1000", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class htb 1:1 root prio 0 rate 20Kbit ceil 20Kbit burst 1000b cburst 1600b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4359", + "name": "Create HTB with class mpu setting", + "category": [ + "qdisc", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root htb" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 htb rate 20Kbit mpu 64", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class htb 1:1 root prio 0 rate 20Kbit ceil 20Kbit burst 1600b cburst 1600b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9048", + "name": "Create HTB with class prio setting", + "category": [ + "qdisc", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root htb" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 htb rate 20Kbit prio 1", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class htb 1:1 root prio 1 rate 20Kbit ceil 20Kbit burst 1600b cburst 1600b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4994", + "name": "Create HTB with class ceil setting", + "category": [ + "qdisc", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root htb" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 htb rate 20Kbit ceil 10Kbit", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class htb 1:1 root prio 0 rate 20Kbit ceil 10Kbit burst 1600b cburst 1600b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9523", + "name": "Create HTB with class cburst setting", + "category": [ + "qdisc", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root htb" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 htb rate 20Kbit cburst 2000", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class htb 1:1 root prio 0 rate 20Kbit ceil 20Kbit burst 1600b cburst 2000b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5353", + "name": "Create HTB with class mtu setting", + "category": [ + "qdisc", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root htb" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 htb rate 20Kbit mtu 2048", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class htb 1:1 root prio 0 rate 20Kbit ceil 20Kbit burst 2Kb cburst 2Kb", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "346a", + "name": "Create HTB with class quantum setting", + "category": [ + "qdisc", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root htb" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 htb rate 20Kbit quantum 2048", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class htb 1:1 root prio 0 rate 20Kbit ceil 20Kbit burst 1600b cburst 1600b", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "303a", + "name": "Delete HTB with handle", + "category": [ + "qdisc", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root htb r2q 5" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc htb 1: root refcnt [0-9]+", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + } +] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 09/18] selftests/tc-testing: add selftests for hfsc qdisc

by Zhengchao Shao

Test 3254: Create HFSC with default setting Test 0289: Create HFSC with class sc and ul rate setting Test 846a: Create HFSC with class sc umax and dmax setting Test 5413: Create HFSC with class rt and ls rate setting Test 9312: Create HFSC with class rt umax and dmax setting Test 6931: Delete HFSC with handle Test 8436: Show HFSC class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/hfsc.json | 167 ++++++++++++++++++ 1 file changed, 167 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hfsc.json diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/hfsc.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/hfsc.json new file mode 100644 index 000000000000..af27b2c20e17 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/hfsc.json @@ -0,0 +1,167 @@ +[ + { + "id": "3254", + "name": "Create HFSC with default setting", + "category": [ + "qdisc", + "hfsc" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hfsc", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hfsc 1: root refcnt [0-9]+", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0289", + "name": "Create HFSC with class sc and ul rate setting", + "category": [ + "qdisc", + "hfsc" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root hfsc default 11" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 hfsc sc rate 20000 ul rate 10000", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class hfsc 1:1 parent 1: sc m1 0bit d 0us m2 20Kbit ul m1 0bit d 0us m2 10Kbit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "846a", + "name": "Create HFSC with class sc umax and dmax setting", + "category": [ + "qdisc", + "hfsc" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root hfsc default 11" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 hfsc sc umax 1540 dmax 5ms rate 10000 ul rate 10000", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class hfsc 1:1 parent 1: sc m1 2464Kbit d 5ms m2 10Kbit ul m1 0bit d 0us m2 10Kbit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5413", + "name": "Create HFSC with class rt and ls rate setting", + "category": [ + "qdisc", + "hfsc" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root hfsc default 11" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 hfsc rt rate 20000 ls rate 10000", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class hfsc 1:1 parent 1: rt m1 0bit d 0us m2 20Kbit ls m1 0bit d 0us m2 10Kbit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9312", + "name": "Create HFSC with class rt umax and dmax setting", + "category": [ + "qdisc", + "hfsc" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root hfsc default 11" + ], + "cmdUnderTest": "$TC class add dev $DUMMY parent 1: classid 1:1 hfsc rt umax 1540 dmax 5ms rate 10000 ls rate 10000", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class hfsc 1:1 parent 1: rt m1 2464Kbit d 5ms m2 10Kbit ls m1 0bit d 0us m2 10Kbit", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "6931", + "name": "Delete HFSC with handle", + "category": [ + "qdisc", + "hfsc" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root hfsc default 11" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc hfsc 1: root refcnt [0-9]+", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "8436", + "name": "Show HFSC class", + "category": [ + "qdisc", + "hfsc" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root hfsc", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class hfsc 1: root", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 08/18] selftests/tc-testing: add selftests for fq_codel qdisc

by Zhengchao Shao

Test 4957: Create FQ_CODEL with default setting Test 7621: Create FQ_CODEL with limit setting Test 6871: Create FQ_CODEL with memory_limit setting Test 5636: Create FQ_CODEL with target setting Test 630a: Create FQ_CODEL with interval setting Test 4324: Create FQ_CODEL with quantum setting Test b190: Create FQ_CODEL with noecn flag Test 5381: Create FQ_CODEL with ce_threshold setting Test c9d2: Create FQ_CODEL with drop_batch setting Test 523b: Create FQ_CODEL with multiple setting Test 9283: Replace FQ_CODEL with noecn setting Test 3459: Change FQ_CODEL with limit setting Test 0128: Delete FQ_CODEL with handle Test 0435: Show FQ_CODEL class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/fq_codel.json | 326 ++++++++++++++++++ 1 file changed, 326 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq_codel.json diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq_codel.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq_codel.json new file mode 100644 index 000000000000..a65266357a9a --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq_codel.json @@ -0,0 +1,326 @@ +[ + { + "id": "4957", + "name": "Create FQ_CODEL with default setting", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq_codel", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 10240p flows 1024 quantum.*target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "7621", + "name": "Create FQ_CODEL with limit setting", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq_codel limit 1000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 1000p flows 1024 quantum.*target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "6871", + "name": "Create FQ_CODEL with memory_limit setting", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq_codel memory_limit 100000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 10240p flows 1024 quantum.*target 5ms interval 100ms memory_limit 100000b ecn drop_batch 64", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5636", + "name": "Create FQ_CODEL with target setting", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq_codel target 2000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 10240p flows 1024 quantum.*target 2ms interval 100ms memory_limit 32Mb ecn drop_batch 64", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "630a", + "name": "Create FQ_CODEL with interval setting", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq_codel interval 5000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 10240p flows 1024 quantum.*target 5ms interval 5ms memory_limit 32Mb ecn drop_batch 64", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4324", + "name": "Create FQ_CODEL with quantum setting", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq_codel quantum 9000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 10240p flows 1024 quantum 9000 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "b190", + "name": "Create FQ_CODEL with noecn flag", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq_codel noecn", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 10240p flows 1024 quantum.*target 5ms interval 100ms memory_limit 32Mb drop_batch 64", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5381", + "name": "Create FQ_CODEL with ce_threshold setting", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq_codel ce_threshold 1024000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 10240p flows 1024 quantum.*target 5ms ce_threshold 1.02s interval 100ms memory_limit 32Mb ecn drop_batch 64", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "c9d2", + "name": "Create FQ_CODEL with drop_batch setting", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq_codel drop_batch 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 10240p flows 1024 quantum.*target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 100", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "523b", + "name": "Create FQ_CODEL with multiple setting", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq_codel limit 1000 flows 256 drop_batch 100", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 1000p flows 256 quantum.*target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 100", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9283", + "name": "Replace FQ_CODEL with noecn setting", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root fq_codel limit 1000 flows 256 drop_batch 100" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root fq_codel noecn", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 1000p flows 256 quantum.*target 5ms interval 100ms memory_limit 32Mb drop_batch 100", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3459", + "name": "Change FQ_CODEL with limit setting", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root fq_codel limit 1000 flows 256 drop_batch 100" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root fq_codel limit 2000", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 2000p flows 256 quantum.*target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 100", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0128", + "name": "Delete FQ_CODEL with handle", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root fq_codel limit 1000 flows 256 drop_batch 100" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc fq_codel 1: root refcnt [0-9]+ limit 1000p flows 256 quantum.*target 5ms interval 100ms memory_limit 32Mb noecn drop_batch 100", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0435", + "name": "Show FQ_CODEL class", + "category": [ + "qdisc", + "fq_codel" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root fq_codel", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class fq_codel 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 07/18] selftests/tc-testing: add selftests for dsmark qdisc

by Zhengchao Shao

Test 6345: Create DSMARK with default setting Test 3462: Create DSMARK with default_index setting Test ca95: Create DSMARK with set_tc_index flag Test a950: Create DSMARK with multiple setting Test 4092: Delete DSMARK with handle Test 5930: Show DSMARK class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/dsmark.json | 140 ++++++++++++++++++ 1 file changed, 140 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/dsmark.json diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/dsmark.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/dsmark.json new file mode 100644 index 000000000000..c030795f9c37 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/dsmark.json @@ -0,0 +1,140 @@ +[ + { + "id": "6345", + "name": "Create DSMARK with default setting", + "category": [ + "qdisc", + "dsmark" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root dsmark indices 1024", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc dsmark 1: root refcnt [0-9]+ indices 0x0400", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3462", + "name": "Create DSMARK with default_index setting", + "category": [ + "qdisc", + "dsmark" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root dsmark indices 1024 default_index 512", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc dsmark 1: root refcnt [0-9]+ indices 0x0400 default_index 0x0200", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "ca95", + "name": "Create DSMARK with set_tc_index flag", + "category": [ + "qdisc", + "dsmark" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root dsmark indices 1024 set_tc_index", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc dsmark 1: root refcnt [0-9]+ indices 0x0400 set_tc_index", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "a950", + "name": "Create DSMARK with multiple setting", + "category": [ + "qdisc", + "dsmark" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root dsmark indices 1024 default_index 1024 set_tc_index", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc dsmark 1: root refcnt [0-9]+ indices 0x0400 default_index 0x0400 set_tc_index", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "4092", + "name": "Delete DSMARK with handle", + "category": [ + "qdisc", + "dsmark" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root dsmark indices 1024 default_index 1024" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc dsmark 1: root refcnt [0-9]+ indices 0x0400", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "5930", + "name": "Show DSMARK class", + "category": [ + "qdisc", + "dsmark" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root dsmark indices 1024", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class dsmark 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 06/18] selftests/tc-testing: add selftests for drr qdisc

by Zhengchao Shao

Test 0385: Create DRR with default setting Test 2375: Delete DRR with handle Test 3092: Show DRR class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/drr.json | 71 +++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/drr.json diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/drr.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/drr.json new file mode 100644 index 000000000000..486a425b3c1c --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/drr.json @@ -0,0 +1,71 @@ +[ + { + "id": "0385", + "name": "Create DRR with default setting", + "category": [ + "qdisc", + "drr" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root drr", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc drr 1: root refcnt [0-9]+", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2375", + "name": "Delete DRR with handle", + "category": [ + "qdisc", + "drr" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root drr" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc drr 1: root refcnt [0-9]+", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "3092", + "name": "Show DRR class", + "category": [ + "qdisc", + "drr" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root drr", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class drr 1:", + "matchCount": "0", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +] -- 2.17.1

3 years, 2 months

1
0
0 0

[PATCH net-next,v3 05/18] selftests/tc-testing: add selftests for cbs qdisc

by Zhengchao Shao

Test 1820: Create CBS with default setting Test 1532: Create CBS with hicredit setting Test 2078: Create CBS with locredit setting Test 9271: Create CBS with sendslope setting Test 0482: Create CBS with idleslope setting Test e8f3: Create CBS with multiple setting Test 23c9: Replace CBS with sendslope setting Test a07a: Change CBS with idleslope setting Test 43b3: Delete CBS with handle Test 9472: Show CBS class Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Victor Nogueira <victor(a)mojatatu.com> Tested-by: Victor Nogueira <victor(a)mojatatu.com> --- .../tc-testing/tc-tests/qdiscs/cbs.json | 234 ++++++++++++++++++ 1 file changed, 234 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/cbs.json diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/cbs.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/cbs.json new file mode 100644 index 000000000000..a46bf5ff8277 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/cbs.json @@ -0,0 +1,234 @@ +[ + { + "id": "1820", + "name": "Create CBS with default setting", + "category": [ + "qdisc", + "cbs" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root cbs", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc cbs 1: root refcnt [0-9]+ hicredit 0 locredit 0 sendslope 0 idleslope 0 offload 0.*qdisc pfifo 0: parent 1: limit 1000p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "1532", + "name": "Create CBS with hicredit setting", + "category": [ + "qdisc", + "cbs" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root cbs hicredit 64", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc cbs 1: root refcnt [0-9]+ hicredit 64 locredit 0 sendslope 0 idleslope 0 offload 0.*qdisc pfifo 0: parent 1: limit 1000p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "2078", + "name": "Create CBS with locredit setting", + "category": [ + "qdisc", + "cbs" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root cbs locredit 10", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc cbs 1: root refcnt [0-9]+ hicredit 0 locredit 10 sendslope 0 idleslope 0 offload 0.*qdisc pfifo 0: parent 1: limit 1000p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9271", + "name": "Create CBS with sendslope setting", + "category": [ + "qdisc", + "cbs" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root cbs sendslope 888", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc cbs 1: root refcnt [0-9]+ hicredit 0 locredit 0 sendslope 888 idleslope 0 offload 0.*qdisc pfifo 0: parent 1: limit 1000p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "0482", + "name": "Create CBS with idleslope setting", + "category": [ + "qdisc", + "cbs" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root cbs idleslope 666", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc cbs 1: root refcnt [0-9]+ hicredit 0 locredit 0 sendslope 0 idleslope 666 offload 0.*qdisc pfifo 0: parent 1: limit 1000p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "e8f3", + "name": "Create CBS with multiple setting", + "category": [ + "qdisc", + "cbs" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root cbs hicredit 10 locredit 75 sendslope 2 idleslope 666", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc cbs 1: root refcnt [0-9]+ hicredit 10 locredit 75 sendslope 2 idleslope 666 offload 0.*qdisc pfifo 0: parent 1: limit 1000p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "23c9", + "name": "Replace CBS with sendslope setting", + "category": [ + "qdisc", + "cbs" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root cbs idleslope 666" + ], + "cmdUnderTest": "$TC qdisc replace dev $DUMMY handle 1: root cbs sendslope 10", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc cbs 1: root refcnt [0-9]+ hicredit 0 locredit 0 sendslope 10 idleslope 0 offload 0.*qdisc pfifo 0: parent 1: limit 1000p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "a07a", + "name": "Change CBS with idleslope setting", + "category": [ + "qdisc", + "cbs" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root cbs idleslope 666" + ], + "cmdUnderTest": "$TC qdisc change dev $DUMMY handle 1: root cbs idleslope 1", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc cbs 1: root refcnt [0-9]+ hicredit 0 locredit 0 sendslope 0 idleslope 1 offload 0.*qdisc pfifo 0: parent 1: limit 1000p", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "43b3", + "name": "Delete CBS with handle", + "category": [ + "qdisc", + "cbs" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true", + "$TC qdisc add dev $DUMMY handle 1: root cbs idleslope 666" + ], + "cmdUnderTest": "$TC qdisc del dev $DUMMY handle 1: root", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc cbs 1: root refcnt [0-9]+ hicredit 0 locredit 0 sendslope 0 idleslope 1 offload 0.*qdisc pfifo 0: parent 1: limit 1000p", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY type dummy" + ] + }, + { + "id": "9472", + "name": "Show CBS class", + "category": [ + "qdisc", + "cbs" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root cbs", + "expExitCode": "0", + "verifyCmd": "$TC class show dev $DUMMY", + "matchPattern": "class cbs 1:[0-9]+ parent 1:", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP link del dev $DUMMY type dummy" + ] + } +] -- 2.17.1

3 years, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror