- Linux-kselftest-mirror - lists.linaro.org

[PATCH v2 1/2] selftest/vm: Use correct PAGE_SHIFT value for ppc64

by Aneesh Kumar K.V

Keep it simple by using a #define and limiting hugepage size to 2M. This keeps the test simpler instead of dynamically finding the page size and huge page size. Without this tests are broken w.r.t reading /proc/self/pagemap if (pread(pagemap_fd, ent, sizeof(ent), (uintptr_t)ptr >> (PAGE_SHIFT - 3)) != sizeof(ent)) err(2, "read pagemap"); Cc: Shuah Khan <shuah(a)kernel.org> Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Aneesh Kumar K.V <aneesh.kumar(a)linux.ibm.com> --- tools/testing/selftests/vm/ksm_tests.c | 9 ++++++++- tools/testing/selftests/vm/transhuge-stress.c | 9 ++++++++- 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/vm/ksm_tests.c b/tools/testing/selftests/vm/ksm_tests.c index 1436e1a9a3d3..cae72872152b 100644 --- a/tools/testing/selftests/vm/ksm_tests.c +++ b/tools/testing/selftests/vm/ksm_tests.c @@ -22,7 +22,14 @@ #define KSM_MERGE_ACROSS_NODES_DEFAULT true #define MB (1ul << 20) -#define PAGE_SHIFT 12 +#ifdef __powerpc64__ +#define PAGE_SHIFT 16 +#else +#define PAGE_SHIFT 12 +#endif +/* + * On ppc64 this will only work with radix 2M hugepage size + */ #define HPAGE_SHIFT 21 #define PAGE_SIZE (1 << PAGE_SHIFT) diff --git a/tools/testing/selftests/vm/transhuge-stress.c b/tools/testing/selftests/vm/transhuge-stress.c index 5e4c036f6ad3..b1f8d98355c5 100644 --- a/tools/testing/selftests/vm/transhuge-stress.c +++ b/tools/testing/selftests/vm/transhuge-stress.c @@ -16,7 +16,14 @@ #include <string.h> #include <sys/mman.h> -#define PAGE_SHIFT 12 +#ifdef __powerpc64__ +#define PAGE_SHIFT 16 +#else +#define PAGE_SHIFT 12 +#endif +/* + * On ppc64 this will only work with radix 2M hugepage size + */ #define HPAGE_SHIFT 21 #define PAGE_SIZE (1 << PAGE_SHIFT) -- 2.34.1

3 years, 7 months

3
5
0 0

[PATCH net-next] ipv6: Reject routes configurations that specify dsfield (tos)

by Guillaume Nault

The ->rtm_tos option is normally used to route packets based on both the destination address and the DS field. However it's ignored for IPv6 routes. Setting ->rtm_tos for IPv6 is thus invalid as the route is going to work only on the destination address anyway, so it won't behave as specified. Suggested-by: Toke Høiland-Jørgensen <toke(a)redhat.com> Signed-off-by: Guillaume Nault <gnault(a)redhat.com> --- The same problem exists for ->rtm_scope. I'm working only on ->rtm_tos here because IPv4 recently started to validate this option too (as part of the DSCP/ECN clarification effort). I'll give this patch some soak time, then send another one for rejecting ->rtm_scope in IPv6 routes if nobody complains. net/ipv6/route.c | 6 ++++++ tools/testing/selftests/net/fib_tests.sh | 13 +++++++++++++ 2 files changed, 19 insertions(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index f4884cda13b9..dd98a11fbdb6 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -5009,6 +5009,12 @@ static int rtm_to_fib6_config(struct sk_buff *skb, struct nlmsghdr *nlh, err = -EINVAL; rtm = nlmsg_data(nlh); + if (rtm->rtm_tos) { + NL_SET_ERR_MSG(extack, + "Invalid dsfield (tos): option not available for IPv6"); + goto errout; + } + *cfg = (struct fib6_config){ .fc_table = rtm->rtm_table, .fc_dst_len = rtm->rtm_dst_len, diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh index bb73235976b3..e2690cc42da3 100755 --- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -988,12 +988,25 @@ ipv6_rt_replace() ipv6_rt_replace_mpath } +ipv6_rt_dsfield() +{ + echo + echo "IPv6 route with dsfield tests" + + run_cmd "$IP -6 route flush 2001:db8:102::/64" + + # IPv6 doesn't support routing based on dsfield + run_cmd "$IP -6 route add 2001:db8:102::/64 dsfield 0x04 via 2001:db8:101::2" + log_test $? 2 "Reject route with dsfield" +} + ipv6_route_test() { route_setup ipv6_rt_add ipv6_rt_replace + ipv6_rt_dsfield route_cleanup } -- 2.21.3

3 years, 7 months

4
5
0 0

<> Negative SEO Services <>

by Miriam

Hi! If you ever need Negative SEO Serrvices, we offer it here https://www.blackhat.to Unsubscribe: https://mgdots.co/unsubscribe/

3 years, 7 months

1
0
0 0

[PATCH V2] selftests/exec: Rename file binfmt_script to binfmt_script.py

by Muhammad Usama Anjum

Rename file for readability purpose. Update its usage and references. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- This path was suggested while review of the following patch. Please apply it after applying that one first: selftests/exec: Add non-regular to TEST_GEN_PROGS Changes in V2: Remove changes from binfmt_script.py, they were wrong --- tools/testing/selftests/exec/Makefile | 2 +- .../testing/selftests/exec/{binfmt_script => binfmt_script.py} | 0 2 files changed, 1 insertion(+), 1 deletion(-) rename tools/testing/selftests/exec/{binfmt_script => binfmt_script.py} (100%) diff --git a/tools/testing/selftests/exec/Makefile b/tools/testing/selftests/exec/Makefile index a89ba6de79870..a0b8688b08369 100644 --- a/tools/testing/selftests/exec/Makefile +++ b/tools/testing/selftests/exec/Makefile @@ -3,7 +3,7 @@ CFLAGS = -Wall CFLAGS += -Wno-nonnull CFLAGS += -D_GNU_SOURCE -TEST_PROGS := binfmt_script +TEST_PROGS := binfmt_script.py TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216 non-regular TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir # Makefile is a run-time dependency, since it's accessed by the execveat test diff --git a/tools/testing/selftests/exec/binfmt_script b/tools/testing/selftests/exec/binfmt_script.py similarity index 100% rename from tools/testing/selftests/exec/binfmt_script rename to tools/testing/selftests/exec/binfmt_script.py -- 2.30.2

3 years, 7 months

3
2
0 0

[GIT PULL] KUnit fixes update for Linux 5.17-rc4

by Shuah Khan

Hi Linus, Please pull the following KUnit fixes update for Linux 5.17-rc4. This KUnit fixes update for Linux 5.17-rc4 consists of bug fixes to the test and usage documentation. Note: The doc fix patch resolves a bugzilla issue. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 235528072f28b3b0a1446279b7eaddda36dbf743: kunit: tool: Import missing importlib.abc (2022-01-25 12:59:43 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-kunit-fixes-5.17-rc4 for you to fetch changes up to 92a68053c3468705e2c7c752c9a3f256304a35a6: Documentation: KUnit: Fix usage bug (2022-02-08 13:16:20 -0700) ---------------------------------------------------------------- linux-kselftest-kunit-fixes-5.17-rc4 This KUnit fixes update for Linux 5.17-rc4 consists of bug fixes to the test and usage documentation. ---------------------------------------------------------------- Akira Kawata (1): Documentation: KUnit: Fix usage bug Daniel Latypov (1): kunit: fix missing f in f-string in run_checks.py Documentation/dev-tools/kunit/usage.rst | 2 +- tools/testing/kunit/run_checks.py | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) ----------------------------------------------------------------

3 years, 7 months

2
1
0 0

[GIT PULL] Kselftest fixes update for Linux 5.17-rc4

by Shuah Khan

Hi Linus, Please pull the following Kselftest fixes update for Linux 5.17-rc4 This Kselftest fixes updated for Linux 5.17-rc4 consists of build and run-time fixes to pidfd, clone3, and ir tests. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit ec049891b2dc16591813eacaddc476b3d27c8c14: kselftest: Fix vdso_test_abi return status (2022-01-31 10:35:14 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-fixes-5.17-rc4 for you to fetch changes up to 183f80fd72db42c9cc483aa7a5e8e881355d0b03: selftests/ir: fix build with ancient kernel headers (2022-02-04 13:14:41 -0700) ---------------------------------------------------------------- linux-kselftest-fixes-5.17-rc4 This Kselftest fixes updated for Linux 5.17-rc4 consists of build and run-time fixes to pidfd, clone3, and ir tests. ---------------------------------------------------------------- Axel Rasmussen (2): pidfd: fix test failure due to stack overflow on some arches selftests: fixup build warnings in pidfd / clone3 tests Sean Young (1): selftests/ir: fix build with ancient kernel headers tools/testing/selftests/clone3/clone3.c | 2 -- tools/testing/selftests/ir/ir_loopback.c | 10 ++++++++++ tools/testing/selftests/pidfd/pidfd.h | 13 ++++++++++--- tools/testing/selftests/pidfd/pidfd_fdinfo_test.c | 22 ++++++++++++++++++---- tools/testing/selftests/pidfd/pidfd_test.c | 6 +++--- tools/testing/selftests/pidfd/pidfd_wait.c | 5 ++--- 6 files changed, 43 insertions(+), 15 deletions(-) ----------------------------------------------------------------

3 years, 7 months

2
1
0 0

[PATCH] selftests/exec: Rename file binfmt_script to binfmt_script.py

by Muhammad Usama Anjum

Rename file for readability purpose. Update its usage and references. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- This path was suggested while review of the following patch. Please apply it after applying that one first: selftests/exec: Add non-regular to TEST_GEN_PROGS --- tools/testing/selftests/exec/Makefile | 2 +- .../exec/{binfmt_script => binfmt_script.py} | 18 +++++++++--------- 2 files changed, 10 insertions(+), 10 deletions(-) rename tools/testing/selftests/exec/{binfmt_script => binfmt_script.py} (90%) diff --git a/tools/testing/selftests/exec/Makefile b/tools/testing/selftests/exec/Makefile index a89ba6de79870..a0b8688b08369 100644 --- a/tools/testing/selftests/exec/Makefile +++ b/tools/testing/selftests/exec/Makefile @@ -3,7 +3,7 @@ CFLAGS = -Wall CFLAGS += -Wno-nonnull CFLAGS += -D_GNU_SOURCE -TEST_PROGS := binfmt_script +TEST_PROGS := binfmt_script.py TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216 non-regular TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir # Makefile is a run-time dependency, since it's accessed by the execveat test diff --git a/tools/testing/selftests/exec/binfmt_script b/tools/testing/selftests/exec/binfmt_script.py similarity index 90% rename from tools/testing/selftests/exec/binfmt_script rename to tools/testing/selftests/exec/binfmt_script.py index 05f94a741c7aa..6f717fedc97bd 100755 --- a/tools/testing/selftests/exec/binfmt_script +++ b/tools/testing/selftests/exec/binfmt_script.py @@ -28,11 +28,11 @@ foreach my $a (@ARGV) { ''' ## -# test - produce a binfmt_script hashbang line for testing +# test - produce a binfmt_script.py hashbang line for testing # # @size: bytes for bprm->buf line, including hashbang but not newline # @good: whether this script is expected to execute correctly -# @hashbang: the special 2 bytes for running binfmt_script +# @hashbang: the special 2 bytes for running binfmt_script.py # @leading: any leading whitespace before the executable path # @root: start of executable pathname # @target: end of executable pathname @@ -45,7 +45,7 @@ def test(name, size, good=True, leading="", root="./", target="/perl", global test_num, tests, NAME_MAX test_num += 1 if test_num > tests: - raise ValueError("more binfmt_script tests than expected! (want %d, expected %d)" + raise ValueError("more binfmt_script.py tests than expected! (want %d, expected %d)" % (test_num, tests)) middle = "" @@ -68,7 +68,7 @@ def test(name, size, good=True, leading="", root="./", target="/perl", if len(newline) > 0: buf += 'echo this is not really perl\n' - script = "binfmt_script-%s" % (name) + script = "binfmt_script.py-%s" % (name) open(script, "w").write(buf) os.chmod(script, 0o755) @@ -78,17 +78,17 @@ def test(name, size, good=True, leading="", root="./", target="/perl", if proc.returncode == 0 and b'Executed interpreter' in stdout: if good: - print("ok %d - binfmt_script %s (successful good exec)" + print("ok %d - binfmt_script.py %s (successful good exec)" % (test_num, name)) else: - print("not ok %d - binfmt_script %s succeeded when it should have failed" + print("not ok %d - binfmt_script.py %s succeeded when it should have failed" % (test_num, name)) else: if good: - print("not ok %d - binfmt_script %s failed when it should have succeeded (rc:%d)" + print("not ok %d - binfmt_script.py %s failed when it should have succeeded (rc:%d)" % (test_num, name, proc.returncode)) else: - print("ok %d - binfmt_script %s (correctly failed bad exec)" + print("ok %d - binfmt_script.py %s (correctly failed bad exec)" % (test_num, name)) # Clean up crazy binaries @@ -167,5 +167,5 @@ test(name="two-under-leading", size=int(SIZE/2), leading=" ") test(name="two-under-lead-trunc-arg", size=int(SIZE/2), leading=" ", arg=" ") if test_num != tests: - raise ValueError("fewer binfmt_script tests than expected! (ran %d, expected %d" + raise ValueError("fewer binfmt_script.py tests than expected! (ran %d, expected %d" % (test_num, tests)) -- 2.30.2

3 years, 7 months

2
1
0 0

Re: [PATCH] selftests/seccomp: Fix seccomp failure by adding missing headers

by Shuah Khan

On 2/10/22 11:08 AM, Sherry Yang wrote: > Yeah, -I works, but just with some compiler warnings. > warnings aren't good. Kees, hope you are okay with this. > If warnings are acceptable, do I need to send V2 patch with -I? > > Sherry > No top posting please. No need to fix it to -I - please send v2 I can't find your patch on lore - not sure why. Please cc linux-kselftest and linux-kernel(a)vger.kernel.org Also run scripts/get_maintainer.pl for a complete list of recipients for this patch. thanks, -- Shuah

3 years, 7 months

2
1
0 0

Re: [PATCH] selftests/seccomp: Fix seccomp failure by adding missing headers

by Shuah Khan

On 2/2/22 1:11 PM, Sherry Yang wrote: > seccomp_bpf failed on tests 47 global.user_notification_filter_empty > and 48 global.user_notification_filter_empty_threaded when it's > tested on updated kernel but with old kernel headers. Because old > kernel headers don't have definition of macro __NR_clone3 which is > required for these two tests. Since under selftests/, we can install > headers once for all tests (the default INSTALL_HDR_PATH is > usr/include), fix it by adding usr/include to the list of directories > to be searched. Use "-isystem" to indicate it's a system directory as > the real kernel headers directories are. > > Signed-off-by: Sherry Yang <sherry.yang(a)oracle.com> > Tested-by: Sherry Yang <sherry.yang(a)oracle.com> > --- > tools/testing/selftests/seccomp/Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/tools/testing/selftests/seccomp/Makefile b/tools/testing/selftests/seccomp/Makefile > index 0ebfe8b0e147..585f7a0c10cb 100644 > --- a/tools/testing/selftests/seccomp/Makefile > +++ b/tools/testing/selftests/seccomp/Makefile > @@ -1,5 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0 > -CFLAGS += -Wl,-no-as-needed -Wall > +CFLAGS += -Wl,-no-as-needed -Wall -isystem ../../../../usr/include/ > LDFLAGS += -lpthread > > TEST_GEN_PROGS := seccomp_bpf seccomp_benchmark > Looks good to me. Adding Kees Cook for his review of this change. thanks, -- Shuah

3 years, 7 months

3
6
0 0

[PATCH] selftests/exec: Add non-regular to TEST_GEN_PROGS

by Muhammad Usama Anjum

non-regular file needs to be compiled and then copied to the output directory. Remove it from TEST_PROGS and add it to TEST_GEN_PROGS. This removes error thrown by rsync when non-regular object isn't found: rsync: [sender] link_stat "/linux/tools/testing/selftests/exec/non-regular" failed: No such file or directory (2) rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3] Fixes: 0f71241a8e32 ("selftests/exec: add file type errno tests") Reported-by: "kernelci.org bot" <bot(a)kernelci.org> Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/exec/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/exec/Makefile b/tools/testing/selftests/exec/Makefile index 551affb437fe1..a89ba6de79870 100644 --- a/tools/testing/selftests/exec/Makefile +++ b/tools/testing/selftests/exec/Makefile @@ -3,8 +3,8 @@ CFLAGS = -Wall CFLAGS += -Wno-nonnull CFLAGS += -D_GNU_SOURCE -TEST_PROGS := binfmt_script non-regular -TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216 +TEST_PROGS := binfmt_script +TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216 non-regular TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir # Makefile is a run-time dependency, since it's accessed by the execveat test TEST_FILES := Makefile -- 2.30.2

3 years, 7 months

3
3
0 0

[PATCH v4 0/2] Documentation: dev-tools: clarify KTAP specification wording

by frowand.list＠gmail.com

From: Frank Rowand <frank.rowand(a)sony.com> Clarify ambiguous wording in KTAP specification version 1. Fix build warnings. Changes since version 3 - Add Reviewed-by: Shuah Khan - Add patch 2/2 to fix build warnings Frank Rowand (2): Documentation: dev-tools: clarify KTAP specification wording Documentation: dev-tools: fix KTAP specification build warnings Documentation/dev-tools/ktap.rst | 49 +++++++++++++++++++++----------- 1 file changed, 32 insertions(+), 17 deletions(-) -- Frank Rowand <frank.rowand(a)sony.com>

3 years, 7 months

4
6
0 0

[PATCH] selftest: KVM: Remove absent target file

by Muhammad Usama Anjum

There is no vmx_pi_mmio_test file. Remove it to get rid of error while creation of selftest archive: rsync: [sender] link_stat "/kselftest/kvm/x86_64/vmx_pi_mmio_test" failed: No such file or directory (2) rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3] Fixes: 6a58150859fd ("selftest: KVM: Add intra host migration tests") Reported-by: "kernelci.org bot" <bot(a)kernelci.org> Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/kvm/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index d61286208e242..b970397f725c7 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -82,7 +82,6 @@ TEST_GEN_PROGS_x86_64 += x86_64/tsc_msrs_test TEST_GEN_PROGS_x86_64 += x86_64/vmx_pmu_msrs_test TEST_GEN_PROGS_x86_64 += x86_64/xen_shinfo_test TEST_GEN_PROGS_x86_64 += x86_64/xen_vmcall_test -TEST_GEN_PROGS_x86_64 += x86_64/vmx_pi_mmio_test TEST_GEN_PROGS_x86_64 += x86_64/sev_migrate_tests TEST_GEN_PROGS_x86_64 += x86_64/amx_test TEST_GEN_PROGS_x86_64 += access_tracking_perf_test -- 2.30.2

3 years, 7 months

1
0
0 0

[PATCH net-next 00/11] net: ping6: support basic socket cmsgs

by Jakub Kicinski

Add support for common SOL_SOCKET cmsgs in ICMPv6 sockets. Extend the cmsg tests to cover more cmsgs and socket types. SOL_IPV6 cmsgs to follow. Jakub Kicinski (11): net: ping6: remove a pr_debug() statement net: ping6: support packet timestamping net: ping6: support setting socket options via cmsg selftests: net: rename cmsg_so_mark selftests: net: make cmsg_so_mark ready for more options selftests: net: cmsg_sender: support icmp and raw sockets selftests: net: cmsg_so_mark: test ICMP and RAW sockets selftests: net: cmsg_so_mark: test with SO_MARK set by setsockopt selftests: net: cmsg_sender: support setting SO_TXTIME selftests: net: cmsg_sender: support Tx timestamping selftests: net: test standard socket cmsgs across UDP and ICMP sockets net/ipv6/ping.c | 14 +- tools/testing/selftests/net/.gitignore | 2 +- tools/testing/selftests/net/Makefile | 3 +- tools/testing/selftests/net/cmsg_sender.c | 380 ++++++++++++++++++++ tools/testing/selftests/net/cmsg_so_mark.c | 67 ---- tools/testing/selftests/net/cmsg_so_mark.sh | 32 +- tools/testing/selftests/net/cmsg_time.sh | 83 +++++ 7 files changed, 499 insertions(+), 82 deletions(-) create mode 100644 tools/testing/selftests/net/cmsg_sender.c delete mode 100644 tools/testing/selftests/net/cmsg_so_mark.c create mode 100755 tools/testing/selftests/net/cmsg_time.sh -- 2.34.1

3 years, 7 months

5
18
0 0

Re: [PATCH] selftest/vm: Use correct PAGE_SHIFT value for ppc64

by Shuah Khan

On 2/10/22 8:03 AM, Aneesh Kumar K V wrote: > On 2/10/22 20:09, Shuah Khan wrote: >> On 2/9/22 9:12 PM, Aneesh Kumar K.V wrote: >>> Shuah Khan <skhan(a)linuxfoundation.org> writes: >>> >>>> On 2/9/22 8:43 AM, Aneesh Kumar K.V wrote: >>>>> Keep it simple by using a #define and limiting hugepage size to 2M. >>>>> This keeps the test simpler instead of dynamically finding the page size >>>>> and huge page size. >>>>> >>>>> Without this tests are broken w.r.t reading /proc/self/pagemap >>>>> >>>>> if (pread(pagemap_fd, ent, sizeof(ent), >>>>> (uintptr_t)ptr >> (PAGE_SHIFT - 3)) != sizeof(ent)) >>>>> err(2, "read pagemap"); >>>>> >>>>> Cc: Shuah Khan <shuah(a)kernel.org> >>>>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar(a)linux.ibm.com> >>>>> --- >>>>> tools/testing/selftests/vm/ksm_tests.c | 8 ++++++++ >>>>> tools/testing/selftests/vm/transhuge-stress.c | 8 ++++++++ >>>>> 2 files changed, 16 insertions(+) >>>>> >>>>> diff --git a/tools/testing/selftests/vm/ksm_tests.c b/tools/testing/selftests/vm/ksm_tests.c >>>>> index 1436e1a9a3d3..8200328ff018 100644 >>>>> --- a/tools/testing/selftests/vm/ksm_tests.c >>>>> +++ b/tools/testing/selftests/vm/ksm_tests.c >>>>> @@ -22,8 +22,16 @@ >>>>> #define KSM_MERGE_ACROSS_NODES_DEFAULT true >>>>> #define MB (1ul << 20) >>>>> +#ifdef __powerpc64__ >>>>> +#define PAGE_SHIFT 16 >>>>> +/* >>>>> + * This will only work with radix 2M hugepage size >>>>> + */ >>>>> +#define HPAGE_SHIFT 21 >>>>> +#else >>>>> #define PAGE_SHIFT 12 >>>>> #define HPAGE_SHIFT 21 >>>>> +#endif >>>>> #define PAGE_SIZE (1 << PAGE_SHIFT) >>>>> #define HPAGE_SIZE (1 << HPAGE_SHIFT) >>>>> diff --git a/tools/testing/selftests/vm/transhuge-stress.c b/tools/testing/selftests/vm/transhuge-stress.c >>>>> index 5e4c036f6ad3..f04c8aa4bcf6 100644 >>>>> --- a/tools/testing/selftests/vm/transhuge-stress.c >>>>> +++ b/tools/testing/selftests/vm/transhuge-stress.c >>>>> @@ -16,8 +16,16 @@ >>>>> #include <string.h> >>>>> #include <sys/mman.h> >>>>> +#ifdef __powerpc64__ >>>>> +#define PAGE_SHIFT 16 >>>>> +/* >>>>> + * This will only work with radix 2M hugepage size >>>>> + */ >>>>> +#define HPAGE_SHIFT 21 >>>> >>>> Why not have this is in common code? >>> >>> Can you suggest where I can move that. We also have helper functions >>> like allocate_transhuge() duplicated between tests. I didn't find >>> libutil.a or anything similar supported by the selftets build. >>> >>>> >> >> I noticed that HPAGE_SHIFT is defined in #ifdef __powerpc64__ block >> as well as #else. I am asking is it necessary to be part of both >> blocks. >> >> +#ifdef __powerpc64__ >> +#define PAGE_SHIFT 16 >> +/* >> + * This will only work with radix 2M hugepage size >> + */ >> +#define HPAGE_SHIFT 21 --- this one >> +#else >> #define PAGE_SHIFT 12 >> #define HPAGE_SHIFT 21 --- this one >> +#endif >> > > > The reason I did that was to add the comment which is relevant only for ppc64. ppc64 supports two hugepage sizes, 2M and 16M. The test won't work correctly with 16M hugepage size. We do have other tests in selftest/vm/ with similar restrictions. > > Right. You don't have to duplicate code for the comment. You can add the comment and then clarify in the comment that it is only relevant to ppc64. This way the comment is clear and we can avoid duplicate code that makes it hard to maintain in the future. thanks, -- Shuah

3 years, 7 months

1
0
0 0

[PATCH v2] selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT

by Krzysztof Kozlowski

The PREEMPT_RT patchset does not use soft IRQs thus trying to filter for do_softirq fails for such kernel: echo do_softirq ftracetest: 81: echo: echo: I/O error Choose some other visible function for the test. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)canonical.com> Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> --- Changes since v1: 1. Use scheduler_tick. 2. Add review tag. Notes: I understand that the failure does not exist on mainline kernel (only with PREEMPT_RT patchset) but the change does not harm it. If it is not suitable alone, please consider it for RT patchset. --- .../selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc index e96e279e0533..25432b8cd5bd 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc @@ -19,7 +19,7 @@ fail() { # mesg FILTER=set_ftrace_filter FUNC1="schedule" -FUNC2="do_softirq" +FUNC2="scheduler_tick" ALL_FUNCS="#### all functions enabled ####" -- 2.32.0

3 years, 7 months

3
7
0 0

[PATCH] selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT

by Krzysztof Kozlowski

The PREEMPT_RT patchset does not use soft IRQs thus trying to filter for do_softirq fails for such kernel: echo do_softirq ftracetest: 81: echo: echo: I/O error Choose some other externally visible function for the test. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)canonical.com> --- I understand that the failure does not exist on mainline kernel (only with PREEMPT_RT patchset) but the change does not harm it. If it is not suitable alone, please consider it for RT patchset. --- .../selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc index e96e279e0533..1d0c7601865f 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc @@ -19,7 +19,7 @@ fail() { # mesg FILTER=set_ftrace_filter FUNC1="schedule" -FUNC2="do_softirq" +FUNC2="_printk" ALL_FUNCS="#### all functions enabled ####" -- 2.32.0

3 years, 7 months

3
3
0 0

[PATCH] MAINTAINERS: Update maintainer list of DMA MAPPING BENCHMARK

by chenxiang

From: Xiang Chen <chenxiang66(a)hisilicon.com> Barry Song will not focus on this area, and Xiang Chen will continue his work to maintain this module. Signed-off-by: Xiang Chen <chenxiang66(a)hisilicon.com> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index ea3e6c914384..48335022b0e4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5765,7 +5765,7 @@ F: include/linux/dma-map-ops.h F: kernel/dma/ DMA MAPPING BENCHMARK -M: Barry Song <song.bao.hua(a)hisilicon.com> +M: Xiang Chen <chenxiang66(a)hisilicon.com> L: iommu(a)lists.linux-foundation.org F: kernel/dma/map_benchmark.c F: tools/testing/selftests/dma/ -- 2.33.0

3 years, 7 months

3
2
0 0

[PATCH] um: Enable FORTIFY_SOURCE

by Kees Cook

Enable FORTIFY_SOURCE so running Kunit tests can test fortified functions. Signed-off-by: Kees Cook <keescook(a)chromium.org> --- arch/um/Kconfig | 1 + arch/um/os-Linux/user_syms.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/um/Kconfig b/arch/um/Kconfig index 4d398b80aea8..746e661395d7 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -9,6 +9,7 @@ config UML select ARCH_HAS_KCOV select ARCH_HAS_STRNCPY_FROM_USER select ARCH_HAS_STRNLEN_USER + select ARCH_HAS_FORTIFY_SOURCE select ARCH_NO_PREEMPT select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_SECCOMP_FILTER diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c index 715594fe5719..d9845b5219ce 100644 --- a/arch/um/os-Linux/user_syms.c +++ b/arch/um/os-Linux/user_syms.c @@ -1,4 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 +#define __NO_FORTIFY #include <linux/types.h> #include <linux/module.h> -- 2.30.2

3 years, 7 months

2
1
0 0

[PATCH v4 1/6] kunit: Introduce _NULL and _NOT_NULL macros

by Ricardo Ribalda

Today, when we want to check if a pointer is NULL and not ERR we have two options: KUNIT_EXPECT_TRUE(test, ptr == NULL); or KUNIT_EXPECT_PTR_NE(test, ptr, (struct mystruct *)NULL); Create a new set of macros that take care of NULL checks. Reviewed-by: Daniel Latypov <dlatypov(a)google.com> Signed-off-by: Ricardo Ribalda <ribalda(a)chromium.org> --- include/kunit/test.h | 84 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) diff --git a/include/kunit/test.h b/include/kunit/test.h index 00b9ff7783ab..e6c18b609b47 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -1218,6 +1218,48 @@ do { \ fmt, \ ##__VA_ARGS__) +/** + * KUNIT_EXPECT_NULL() - Expects that @ptr is null. + * @test: The test context object. + * @ptr: an arbitrary pointer. + * + * Sets an expectation that the value that @ptr evaluates to is null. This is + * semantically equivalent to KUNIT_EXPECT_PTR_EQ(@test, ptr, NULL). + * See KUNIT_EXPECT_TRUE() for more information. + */ +#define KUNIT_EXPECT_NULL(test, ptr) \ + KUNIT_EXPECT_NULL_MSG(test, \ + ptr, \ + NULL) + +#define KUNIT_EXPECT_NULL_MSG(test, ptr, fmt, ...) \ + KUNIT_BINARY_PTR_ASSERTION(test, \ + KUNIT_EXPECTATION, \ + ptr, ==, NULL, \ + fmt, \ + ##__VA_ARGS__) + +/** + * KUNIT_EXPECT_NOT_NULL() - Expects that @ptr is not null. + * @test: The test context object. + * @ptr: an arbitrary pointer. + * + * Sets an expectation that the value that @ptr evaluates to is not null. This + * is semantically equivalent to KUNIT_EXPECT_PTR_NE(@test, ptr, NULL). + * See KUNIT_EXPECT_TRUE() for more information. + */ +#define KUNIT_EXPECT_NOT_NULL(test, ptr) \ + KUNIT_EXPECT_NOT_NULL_MSG(test, \ + ptr, \ + NULL) + +#define KUNIT_EXPECT_NOT_NULL_MSG(test, ptr, fmt, ...) \ + KUNIT_BINARY_PTR_ASSERTION(test, \ + KUNIT_EXPECTATION, \ + ptr, !=, NULL, \ + fmt, \ + ##__VA_ARGS__) + /** * KUNIT_EXPECT_NOT_ERR_OR_NULL() - Expects that @ptr is not null and not err. * @test: The test context object. @@ -1485,6 +1527,48 @@ do { \ fmt, \ ##__VA_ARGS__) +/** + * KUNIT_ASSERT_NULL() - Asserts that pointers @ptr is null. + * @test: The test context object. + * @ptr: an arbitrary pointer. + * + * Sets an assertion that the values that @ptr evaluates to is null. This is + * the same as KUNIT_EXPECT_NULL(), except it causes an assertion + * failure (see KUNIT_ASSERT_TRUE()) when the assertion is not met. + */ +#define KUNIT_ASSERT_NULL(test, ptr) \ + KUNIT_ASSERT_NULL_MSG(test, \ + ptr, \ + NULL) + +#define KUNIT_ASSERT_NULL_MSG(test, ptr, fmt, ...) \ + KUNIT_BINARY_PTR_ASSERTION(test, \ + KUNIT_ASSERTION, \ + ptr, ==, NULL, \ + fmt, \ + ##__VA_ARGS__) + +/** + * KUNIT_ASSERT_NOT_NULL() - Asserts that pointers @ptr is not null. + * @test: The test context object. + * @ptr: an arbitrary pointer. + * + * Sets an assertion that the values that @ptr evaluates to is not null. This + * is the same as KUNIT_EXPECT_NOT_NULL(), except it causes an assertion + * failure (see KUNIT_ASSERT_TRUE()) when the assertion is not met. + */ +#define KUNIT_ASSERT_NOT_NULL(test, ptr) \ + KUNIT_ASSERT_NOT_NULL_MSG(test, \ + ptr, \ + NULL) + +#define KUNIT_ASSERT_NOT_NULL_MSG(test, ptr, fmt, ...) \ + KUNIT_BINARY_PTR_ASSERTION(test, \ + KUNIT_ASSERTION, \ + ptr, !=, NULL, \ + fmt, \ + ##__VA_ARGS__) + /** * KUNIT_ASSERT_NOT_ERR_OR_NULL() - Assertion that @ptr is not null and not err. * @test: The test context object. -- 2.35.0.263.gb82422642f-goog

3 years, 7 months

3
10
0 0

[PATCH AUTOSEL 4.9 4/7] selftests/zram: Adapt the situation that /dev/zram0 is being used

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram.sh | 15 +--- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++---------- 4 files changed, 66 insertions(+), 63 deletions(-) diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 9399c4aeaa265..d4652e295ff8a 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -1,9 +1,6 @@ #!/bin/bash TCID="zram.sh" -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh run_zram () { @@ -17,14 +14,4 @@ echo "" check_prereqs -# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index ac6e4ddd2604e..8abc9965089d1 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -42,7 +42,7 @@ zram_algs="lzo" zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -76,7 +76,6 @@ zram_mount zram_fill_fs zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index 74569b883737f..3768cfd2e5f83 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -45,7 +45,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 2c1d1c567f854..130d193cbd727 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -14,10 +14,12 @@ # Author: Alexey Kodanev <alexey.kodanev(a)oracle.com> # Modified: Naresh Kamboju <naresh.kamboju(a)linaro.org> -MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -55,57 +57,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done - for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done -} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi -zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi } zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi - if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" } zram_max_streams() @@ -119,7 +136,7 @@ zram_max_streams() return 0 fi - local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -131,7 +148,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream" i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done echo "zram max streams: OK" @@ -141,15 +158,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm" - local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done echo "zram set compression algorithm: OK" @@ -158,14 +176,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set disksizes: OK" @@ -175,14 +193,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set memory limit: OK" @@ -191,8 +209,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -215,7 +233,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -229,7 +247,7 @@ zram_swapoff() zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -248,7 +266,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \ -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 4.9 3/7] selftests/zram01.sh: Fix compression ratio calculation

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram01.sh | 30 +++++++------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index b9566a6478a9c..ac6e4ddd2604e 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -42,8 +42,6 @@ zram_algs="lzo" zram_fill_fs() { - local mem_free0=$(free -m | awk 'NR==2 {print $4}') - for i in $(seq 0 $(($dev_num - 1))); do echo "fill zram$i..." local b=0 @@ -54,29 +52,17 @@ zram_fill_fs() b=$(($b + 1)) done echo "zram$i can be filled with '$b' KB" - done - local mem_free1=$(free -m | awk 'NR==2 {print $4}') - local used_mem=$(($mem_free0 - $mem_free1)) + local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"` + local v=$((100 * 1024 * $b / $mem_used_total)) + if [ "$v" -lt 100 ]; then + echo "FAIL compression ratio: 0.$v:1" + ERR_CODE=-1 + return + fi - local total_size=0 - for sm in $zram_sizes; do - local s=$(echo $sm | sed 's/M//') - total_size=$(($total_size + $s)) + echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" done - - echo "zram used ${used_mem}M, zram disk sizes ${total_size}M" - - local v=$((100 * $total_size / $used_mem)) - - if [ "$v" -lt 100 ]; then - echo "FAIL compression ratio: 0.$v:1" - ERR_CODE=-1 - zram_cleanup - return - fi - - echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" } check_prereqs -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 4.9 2/7] selftests/zram: Skip max_comp_streams interface on newer kernel

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 9e73a4fb9b0aa..2c1d1c567f854 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -20,6 +20,9 @@ dev_mounted=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -34,6 +37,20 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -95,6 +112,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)" + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 4.14 4/8] selftests/zram: Adapt the situation that /dev/zram0 is being used

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram.sh | 15 +--- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++---------- 4 files changed, 66 insertions(+), 63 deletions(-) diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec4547..b0b91d9b0dc21 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh" -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh run_zram () { @@ -18,14 +15,4 @@ echo "" check_prereqs -# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index ac6e4ddd2604e..8abc9965089d1 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -42,7 +42,7 @@ zram_algs="lzo" zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -76,7 +76,6 @@ zram_mount zram_fill_fs zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index 74569b883737f..3768cfd2e5f83 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -45,7 +45,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 2c1d1c567f854..130d193cbd727 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -14,10 +14,12 @@ # Author: Alexey Kodanev <alexey.kodanev(a)oracle.com> # Modified: Naresh Kamboju <naresh.kamboju(a)linaro.org> -MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -55,57 +57,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done - for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done -} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi -zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi } zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi - if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" } zram_max_streams() @@ -119,7 +136,7 @@ zram_max_streams() return 0 fi - local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -131,7 +148,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream" i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done echo "zram max streams: OK" @@ -141,15 +158,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm" - local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done echo "zram set compression algorithm: OK" @@ -158,14 +176,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set disksizes: OK" @@ -175,14 +193,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set memory limit: OK" @@ -191,8 +209,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -215,7 +233,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -229,7 +247,7 @@ zram_swapoff() zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -248,7 +266,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \ -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 4.14 3/8] selftests/zram01.sh: Fix compression ratio calculation

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram01.sh | 30 +++++++------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index b9566a6478a9c..ac6e4ddd2604e 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -42,8 +42,6 @@ zram_algs="lzo" zram_fill_fs() { - local mem_free0=$(free -m | awk 'NR==2 {print $4}') - for i in $(seq 0 $(($dev_num - 1))); do echo "fill zram$i..." local b=0 @@ -54,29 +52,17 @@ zram_fill_fs() b=$(($b + 1)) done echo "zram$i can be filled with '$b' KB" - done - local mem_free1=$(free -m | awk 'NR==2 {print $4}') - local used_mem=$(($mem_free0 - $mem_free1)) + local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"` + local v=$((100 * 1024 * $b / $mem_used_total)) + if [ "$v" -lt 100 ]; then + echo "FAIL compression ratio: 0.$v:1" + ERR_CODE=-1 + return + fi - local total_size=0 - for sm in $zram_sizes; do - local s=$(echo $sm | sed 's/M//') - total_size=$(($total_size + $s)) + echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" done - - echo "zram used ${used_mem}M, zram disk sizes ${total_size}M" - - local v=$((100 * $total_size / $used_mem)) - - if [ "$v" -lt 100 ]; then - echo "FAIL compression ratio: 0.$v:1" - ERR_CODE=-1 - zram_cleanup - return - fi - - echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" } check_prereqs -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 4.14 2/8] selftests/zram: Skip max_comp_streams interface on newer kernel

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 9e73a4fb9b0aa..2c1d1c567f854 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -20,6 +20,9 @@ dev_mounted=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -34,6 +37,20 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -95,6 +112,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)" + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 4.19 04/10] selftests/zram: Adapt the situation that /dev/zram0 is being used

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram.sh | 15 +--- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++---------- 4 files changed, 66 insertions(+), 63 deletions(-) diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec4547..b0b91d9b0dc21 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh" -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh run_zram () { @@ -18,14 +15,4 @@ echo "" check_prereqs -# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index ac6e4ddd2604e..8abc9965089d1 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -42,7 +42,7 @@ zram_algs="lzo" zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -76,7 +76,6 @@ zram_mount zram_fill_fs zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index 74569b883737f..3768cfd2e5f83 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -45,7 +45,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 2c1d1c567f854..130d193cbd727 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -14,10 +14,12 @@ # Author: Alexey Kodanev <alexey.kodanev(a)oracle.com> # Modified: Naresh Kamboju <naresh.kamboju(a)linaro.org> -MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -55,57 +57,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done - for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done -} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi -zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi } zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi - if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" } zram_max_streams() @@ -119,7 +136,7 @@ zram_max_streams() return 0 fi - local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -131,7 +148,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream" i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done echo "zram max streams: OK" @@ -141,15 +158,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm" - local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done echo "zram set compression algorithm: OK" @@ -158,14 +176,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set disksizes: OK" @@ -175,14 +193,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set memory limit: OK" @@ -191,8 +209,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -215,7 +233,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -229,7 +247,7 @@ zram_swapoff() zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -248,7 +266,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \ -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 4.19 03/10] selftests/zram01.sh: Fix compression ratio calculation

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram01.sh | 30 +++++++------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index b9566a6478a9c..ac6e4ddd2604e 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -42,8 +42,6 @@ zram_algs="lzo" zram_fill_fs() { - local mem_free0=$(free -m | awk 'NR==2 {print $4}') - for i in $(seq 0 $(($dev_num - 1))); do echo "fill zram$i..." local b=0 @@ -54,29 +52,17 @@ zram_fill_fs() b=$(($b + 1)) done echo "zram$i can be filled with '$b' KB" - done - local mem_free1=$(free -m | awk 'NR==2 {print $4}') - local used_mem=$(($mem_free0 - $mem_free1)) + local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"` + local v=$((100 * 1024 * $b / $mem_used_total)) + if [ "$v" -lt 100 ]; then + echo "FAIL compression ratio: 0.$v:1" + ERR_CODE=-1 + return + fi - local total_size=0 - for sm in $zram_sizes; do - local s=$(echo $sm | sed 's/M//') - total_size=$(($total_size + $s)) + echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" done - - echo "zram used ${used_mem}M, zram disk sizes ${total_size}M" - - local v=$((100 * $total_size / $used_mem)) - - if [ "$v" -lt 100 ]; then - echo "FAIL compression ratio: 0.$v:1" - ERR_CODE=-1 - zram_cleanup - return - fi - - echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" } check_prereqs -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 4.19 02/10] selftests/zram: Skip max_comp_streams interface on newer kernel

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 9e73a4fb9b0aa..2c1d1c567f854 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -20,6 +20,9 @@ dev_mounted=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -34,6 +37,20 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -95,6 +112,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)" + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.4 06/15] selftests/zram: Adapt the situation that /dev/zram0 is being used

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram.sh | 15 +--- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++---------- 4 files changed, 66 insertions(+), 63 deletions(-) diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec4547..b0b91d9b0dc21 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh" -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh run_zram () { @@ -18,14 +15,4 @@ echo "" check_prereqs -# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index e9e9eb777e2c7..8f4affe34f3e4 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,7 +33,7 @@ zram_algs="lzo" zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -67,7 +67,6 @@ zram_mount zram_fill_fs zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index e83b404807c09..2418b0c4ed136 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -36,7 +36,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index f47fc0f27e99e..21ec1966de76c 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -5,10 +5,12 @@ # Author: Alexey Kodanev <alexey.kodanev(a)oracle.com> # Modified: Naresh Kamboju <naresh.kamboju(a)linaro.org> -MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -46,57 +48,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done - for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done -} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi -zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi } zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi - if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" } zram_max_streams() @@ -110,7 +127,7 @@ zram_max_streams() return 0 fi - local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -122,7 +139,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream" i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done echo "zram max streams: OK" @@ -132,15 +149,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm" - local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done echo "zram set compression algorithm: OK" @@ -149,14 +167,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set disksizes: OK" @@ -166,14 +184,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set memory limit: OK" @@ -182,8 +200,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -206,7 +224,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -220,7 +238,7 @@ zram_swapoff() zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -239,7 +257,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \ -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.4 05/15] selftests/zram01.sh: Fix compression ratio calculation

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram01.sh | 30 +++++++------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index 114863d9fb876..e9e9eb777e2c7 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,8 +33,6 @@ zram_algs="lzo" zram_fill_fs() { - local mem_free0=$(free -m | awk 'NR==2 {print $4}') - for i in $(seq 0 $(($dev_num - 1))); do echo "fill zram$i..." local b=0 @@ -45,29 +43,17 @@ zram_fill_fs() b=$(($b + 1)) done echo "zram$i can be filled with '$b' KB" - done - local mem_free1=$(free -m | awk 'NR==2 {print $4}') - local used_mem=$(($mem_free0 - $mem_free1)) + local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"` + local v=$((100 * 1024 * $b / $mem_used_total)) + if [ "$v" -lt 100 ]; then + echo "FAIL compression ratio: 0.$v:1" + ERR_CODE=-1 + return + fi - local total_size=0 - for sm in $zram_sizes; do - local s=$(echo $sm | sed 's/M//') - total_size=$(($total_size + $s)) + echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" done - - echo "zram used ${used_mem}M, zram disk sizes ${total_size}M" - - local v=$((100 * $total_size / $used_mem)) - - if [ "$v" -lt 100 ]; then - echo "FAIL compression ratio: 0.$v:1" - ERR_CODE=-1 - zram_cleanup - return - fi - - echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" } check_prereqs -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.4 04/15] selftests/zram: Skip max_comp_streams interface on newer kernel

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 6f872f266fd11..f47fc0f27e99e 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -11,6 +11,9 @@ dev_mounted=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -25,6 +28,20 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -86,6 +103,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)" + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.4 02/15] selftests: rtc: Increase test timeout so that all tests run

by Sasha Levin

From: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> [ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ] The timeout setting for the rtc kselftest is currently 90 seconds. This setting is used by the kselftest runner to stop running a test if it takes longer than the assigned value. However, two of the test cases inside rtc set alarms. These alarms are set to the next beginning of the minute, so each of these test cases may take up to, in the worst case, 60 seconds. In order to allow for all test cases in rtc to run, even in the worst case, when using the kselftest runner, the timeout value should be increased to at least 120. Set it to 180, so there's some additional slack. Correct operation can be tested by running the following command right after the start of a minute (low second count), and checking that all test cases run: ./run_kselftest.sh -c rtc Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Acked-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/rtc/settings | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/rtc/settings b/tools/testing/selftests/rtc/settings index ba4d85f74cd6b..a953c96aa16e1 100644 --- a/tools/testing/selftests/rtc/settings +++ b/tools/testing/selftests/rtc/settings @@ -1 +1 @@ -timeout=90 +timeout=180 -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.10 12/27] selftests: skip mincore.check_file_mmap when fs lacks needed support

by Sasha Levin

From: Cristian Marussi <cristian.marussi(a)arm.com> [ Upstream commit dae1d8ac31896988e7313384c0370176a75e9b45 ] Report mincore.check_file_mmap as SKIP instead of FAIL if the underlying filesystem lacks support of O_TMPFILE or fallocate since such failures are not really related to mincore functionality. Cc: Ricardo Cañuelo <ricardo.canuelo(a)collabora.com> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/mincore/mincore_selftest.c | 20 +++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/mincore/mincore_selftest.c b/tools/testing/selftests/mincore/mincore_selftest.c index 5a1e85ff5d32a..2cf6f2f277ab8 100644 --- a/tools/testing/selftests/mincore/mincore_selftest.c +++ b/tools/testing/selftests/mincore/mincore_selftest.c @@ -208,15 +208,21 @@ TEST(check_file_mmap) errno = 0; fd = open(".", O_TMPFILE | O_RDWR, 0600); - ASSERT_NE(-1, fd) { - TH_LOG("Can't create temporary file: %s", - strerror(errno)); + if (fd < 0) { + ASSERT_EQ(errno, EOPNOTSUPP) { + TH_LOG("Can't create temporary file: %s", + strerror(errno)); + } + SKIP(goto out_free, "O_TMPFILE not supported by filesystem."); } errno = 0; retval = fallocate(fd, 0, 0, FILE_SIZE); - ASSERT_EQ(0, retval) { - TH_LOG("Error allocating space for the temporary file: %s", - strerror(errno)); + if (retval) { + ASSERT_EQ(errno, EOPNOTSUPP) { + TH_LOG("Error allocating space for the temporary file: %s", + strerror(errno)); + } + SKIP(goto out_close, "fallocate not supported by filesystem."); } /* @@ -272,7 +278,9 @@ TEST(check_file_mmap) } munmap(addr, FILE_SIZE); +out_close: close(fd); +out_free: free(vec); } -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.10 11/27] selftests: openat2: Skip testcases that fail with EOPNOTSUPP

by Sasha Levin

From: Cristian Marussi <cristian.marussi(a)arm.com> [ Upstream commit ac9e0a250bb155078601a5b999aab05f2a04d1ab ] Skip testcases that fail since the requested valid flags combination is not supported by the underlying filesystem. Cc: Aleksa Sarai <cyphar(a)cyphar.com> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/openat2/openat2_test.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/openat2/openat2_test.c b/tools/testing/selftests/openat2/openat2_test.c index b386367c606b1..453152b58e7f0 100644 --- a/tools/testing/selftests/openat2/openat2_test.c +++ b/tools/testing/selftests/openat2/openat2_test.c @@ -244,6 +244,16 @@ void test_openat2_flags(void) unlink(path); fd = sys_openat2(AT_FDCWD, path, &test->how); + if (fd < 0 && fd == -EOPNOTSUPP) { + /* + * Skip the testcase if it failed because not supported + * by FS. (e.g. a valid O_TMPFILE combination on NFS) + */ + ksft_test_result_skip("openat2 with %s fails with %d (%s)\n", + test->name, fd, strerror(-fd)); + goto next; + } + if (test->err >= 0) failed = (fd < 0); else @@ -288,7 +298,7 @@ void test_openat2_flags(void) else resultfn("openat2 with %s fails with %d (%s)\n", test->name, test->err, strerror(-test->err)); - +next: free(fdpath); fflush(stdout); } -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.10 10/27] selftests: openat2: Add missing dependency in Makefile

by Sasha Levin

From: Cristian Marussi <cristian.marussi(a)arm.com> [ Upstream commit ea3396725aa143dd42fe388cb67e44c90d2fb719 ] Add a dependency on header helpers.h to the main target; while at that add to helpers.h also a missing include for bool types. Cc: Aleksa Sarai <cyphar(a)cyphar.com> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/openat2/Makefile | 2 +- tools/testing/selftests/openat2/helpers.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/openat2/Makefile b/tools/testing/selftests/openat2/Makefile index 4b93b1417b862..843ba56d8e49e 100644 --- a/tools/testing/selftests/openat2/Makefile +++ b/tools/testing/selftests/openat2/Makefile @@ -5,4 +5,4 @@ TEST_GEN_PROGS := openat2_test resolve_test rename_attack_test include ../lib.mk -$(TEST_GEN_PROGS): helpers.c +$(TEST_GEN_PROGS): helpers.c helpers.h diff --git a/tools/testing/selftests/openat2/helpers.h b/tools/testing/selftests/openat2/helpers.h index ad5d0ba5b6ce9..7056340b9339e 100644 --- a/tools/testing/selftests/openat2/helpers.h +++ b/tools/testing/selftests/openat2/helpers.h @@ -9,6 +9,7 @@ #define _GNU_SOURCE #include <stdint.h> +#include <stdbool.h> #include <errno.h> #include <linux/types.h> #include "../kselftest.h" -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.10 09/27] selftests: openat2: Print also errno in failure messages

by Sasha Levin

From: Cristian Marussi <cristian.marussi(a)arm.com> [ Upstream commit e051cdf655fa016692008a446a060eff06222bb5 ] In E_func() macro, on error, print also errno in order to aid debugging. Cc: Aleksa Sarai <cyphar(a)cyphar.com> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/openat2/helpers.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/openat2/helpers.h b/tools/testing/selftests/openat2/helpers.h index a6ea27344db2d..ad5d0ba5b6ce9 100644 --- a/tools/testing/selftests/openat2/helpers.h +++ b/tools/testing/selftests/openat2/helpers.h @@ -62,11 +62,12 @@ bool needs_openat2(const struct open_how *how); (similar to chroot(2)). */ #endif /* RESOLVE_IN_ROOT */ -#define E_func(func, ...) \ - do { \ - if (func(__VA_ARGS__) < 0) \ - ksft_exit_fail_msg("%s:%d %s failed\n", \ - __FILE__, __LINE__, #func);\ +#define E_func(func, ...) \ + do { \ + errno = 0; \ + if (func(__VA_ARGS__) < 0) \ + ksft_exit_fail_msg("%s:%d %s failed - errno:%d\n", \ + __FILE__, __LINE__, #func, errno); \ } while (0) #define E_asprintf(...) E_func(asprintf, __VA_ARGS__) -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.10 08/27] selftests/zram: Adapt the situation that /dev/zram0 is being used

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram.sh | 15 +--- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++---------- 4 files changed, 66 insertions(+), 63 deletions(-) diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec4547..b0b91d9b0dc21 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh" -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh run_zram () { @@ -18,14 +15,4 @@ echo "" check_prereqs -# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index e9e9eb777e2c7..8f4affe34f3e4 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,7 +33,7 @@ zram_algs="lzo" zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -67,7 +67,6 @@ zram_mount zram_fill_fs zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index e83b404807c09..2418b0c4ed136 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -36,7 +36,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index f47fc0f27e99e..21ec1966de76c 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -5,10 +5,12 @@ # Author: Alexey Kodanev <alexey.kodanev(a)oracle.com> # Modified: Naresh Kamboju <naresh.kamboju(a)linaro.org> -MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -46,57 +48,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done - for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done -} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi -zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi } zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi - if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" } zram_max_streams() @@ -110,7 +127,7 @@ zram_max_streams() return 0 fi - local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -122,7 +139,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream" i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done echo "zram max streams: OK" @@ -132,15 +149,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm" - local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done echo "zram set compression algorithm: OK" @@ -149,14 +167,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set disksizes: OK" @@ -166,14 +184,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set memory limit: OK" @@ -182,8 +200,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -206,7 +224,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -220,7 +238,7 @@ zram_swapoff() zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -239,7 +257,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \ -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.10 07/27] selftests/zram01.sh: Fix compression ratio calculation

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram01.sh | 30 +++++++------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index 114863d9fb876..e9e9eb777e2c7 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,8 +33,6 @@ zram_algs="lzo" zram_fill_fs() { - local mem_free0=$(free -m | awk 'NR==2 {print $4}') - for i in $(seq 0 $(($dev_num - 1))); do echo "fill zram$i..." local b=0 @@ -45,29 +43,17 @@ zram_fill_fs() b=$(($b + 1)) done echo "zram$i can be filled with '$b' KB" - done - local mem_free1=$(free -m | awk 'NR==2 {print $4}') - local used_mem=$(($mem_free0 - $mem_free1)) + local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"` + local v=$((100 * 1024 * $b / $mem_used_total)) + if [ "$v" -lt 100 ]; then + echo "FAIL compression ratio: 0.$v:1" + ERR_CODE=-1 + return + fi - local total_size=0 - for sm in $zram_sizes; do - local s=$(echo $sm | sed 's/M//') - total_size=$(($total_size + $s)) + echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" done - - echo "zram used ${used_mem}M, zram disk sizes ${total_size}M" - - local v=$((100 * $total_size / $used_mem)) - - if [ "$v" -lt 100 ]; then - echo "FAIL compression ratio: 0.$v:1" - ERR_CODE=-1 - zram_cleanup - return - fi - - echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" } check_prereqs -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.10 06/27] selftests/zram: Skip max_comp_streams interface on newer kernel

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 6f872f266fd11..f47fc0f27e99e 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -11,6 +11,9 @@ dev_mounted=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -25,6 +28,20 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -86,6 +103,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)" + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.10 04/27] kselftest: signal all child processes

by Sasha Levin

From: Li Zhijian <lizhijian(a)cn.fujitsu.com> [ Upstream commit 92d25637a3a45904292c93f1863c6bbda4e3e38f ] We have some many cases that will create child process as well, such as pidfd_wait. Previously, we will signal/kill the parent process when it is time out, but this signal will not be sent to its child process. In such case, if child process doesn't terminate itself, ksefltest framework will hang forever. Here we group all its child processes so that kill() can signal all of them in timeout. Fixed change log: Shuah Khan <skhan(a)linuxfoundation.org> Suggested-by: yang xu <xuyang2018.jy(a)cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian(a)cn.fujitsu.com> Acked-by: Christian Brauner <christian.brauner(a)ubuntu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/kselftest_harness.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index 5ecb9718e1616..3e7b2e521cde4 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -871,7 +871,8 @@ static void __timeout_handler(int sig, siginfo_t *info, void *ucontext) } t->timed_out = true; - kill(t->pid, SIGKILL); + // signal process group + kill(-(t->pid), SIGKILL); } void __wait_for_test(struct __test_metadata *t) @@ -981,6 +982,7 @@ void __run_test(struct __fixture_metadata *f, ksft_print_msg("ERROR SPAWNING TEST CHILD\n"); t->passed = 0; } else if (t->pid == 0) { + setpgrp(); t->fn(t, variant); if (t->skip) _exit(255); -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.10 03/27] selftests: rtc: Increase test timeout so that all tests run

by Sasha Levin

From: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> [ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ] The timeout setting for the rtc kselftest is currently 90 seconds. This setting is used by the kselftest runner to stop running a test if it takes longer than the assigned value. However, two of the test cases inside rtc set alarms. These alarms are set to the next beginning of the minute, so each of these test cases may take up to, in the worst case, 60 seconds. In order to allow for all test cases in rtc to run, even in the worst case, when using the kselftest runner, the timeout value should be increased to at least 120. Set it to 180, so there's some additional slack. Correct operation can be tested by running the following command right after the start of a minute (low second count), and checking that all test cases run: ./run_kselftest.sh -c rtc Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Acked-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/rtc/settings | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/rtc/settings b/tools/testing/selftests/rtc/settings index ba4d85f74cd6b..a953c96aa16e1 100644 --- a/tools/testing/selftests/rtc/settings +++ b/tools/testing/selftests/rtc/settings @@ -1 +1 @@ -timeout=90 +timeout=180 -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.15 21/36] kselftest: Fix vdso_test_abi return status

by Sasha Levin

From: Vincenzo Frascino <vincenzo.frascino(a)arm.com> [ Upstream commit ec049891b2dc16591813eacaddc476b3d27c8c14 ] vdso_test_abi contains a batch of tests that verify the validity of the vDSO ABI. When a vDSO symbol is not found the relevant test is skipped reporting KSFT_SKIP. All the tests return values are then added in a single variable which is checked to verify failures. This approach can have side effects which result in reporting the wrong kselftest exit status. Fix vdso_test_abi verifying the return code of each test separately. Cc: Shuah Khan <shuah(a)kernel.org> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Reported-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/vDSO/vdso_test_abi.c | 135 +++++++++---------- 1 file changed, 62 insertions(+), 73 deletions(-) diff --git a/tools/testing/selftests/vDSO/vdso_test_abi.c b/tools/testing/selftests/vDSO/vdso_test_abi.c index 3d603f1394af4..883ca85424bc5 100644 --- a/tools/testing/selftests/vDSO/vdso_test_abi.c +++ b/tools/testing/selftests/vDSO/vdso_test_abi.c @@ -33,110 +33,114 @@ typedef long (*vdso_clock_gettime_t)(clockid_t clk_id, struct timespec *ts); typedef long (*vdso_clock_getres_t)(clockid_t clk_id, struct timespec *ts); typedef time_t (*vdso_time_t)(time_t *t); -static int vdso_test_gettimeofday(void) +#define VDSO_TEST_PASS_MSG() "\n%s(): PASS\n", __func__ +#define VDSO_TEST_FAIL_MSG(x) "\n%s(): %s FAIL\n", __func__, x +#define VDSO_TEST_SKIP_MSG(x) "\n%s(): SKIP: Could not find %s\n", __func__, x + +static void vdso_test_gettimeofday(void) { /* Find gettimeofday. */ vdso_gettimeofday_t vdso_gettimeofday = (vdso_gettimeofday_t)vdso_sym(version, name[0]); if (!vdso_gettimeofday) { - printf("Could not find %s\n", name[0]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[0])); + return; } struct timeval tv; long ret = vdso_gettimeofday(&tv, 0); if (ret == 0) { - printf("The time is %lld.%06lld\n", - (long long)tv.tv_sec, (long long)tv.tv_usec); + ksft_print_msg("The time is %lld.%06lld\n", + (long long)tv.tv_sec, (long long)tv.tv_usec); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[0]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[0])); } - - return KSFT_PASS; } -static int vdso_test_clock_gettime(clockid_t clk_id) +static void vdso_test_clock_gettime(clockid_t clk_id) { /* Find clock_gettime. */ vdso_clock_gettime_t vdso_clock_gettime = (vdso_clock_gettime_t)vdso_sym(version, name[1]); if (!vdso_clock_gettime) { - printf("Could not find %s\n", name[1]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[1])); + return; } struct timespec ts; long ret = vdso_clock_gettime(clk_id, &ts); if (ret == 0) { - printf("The time is %lld.%06lld\n", - (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_print_msg("The time is %lld.%06lld\n", + (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[1]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[1])); } - - return KSFT_PASS; } -static int vdso_test_time(void) +static void vdso_test_time(void) { /* Find time. */ vdso_time_t vdso_time = (vdso_time_t)vdso_sym(version, name[2]); if (!vdso_time) { - printf("Could not find %s\n", name[2]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[2])); + return; } long ret = vdso_time(NULL); if (ret > 0) { - printf("The time in hours since January 1, 1970 is %lld\n", + ksft_print_msg("The time in hours since January 1, 1970 is %lld\n", (long long)(ret / 3600)); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[2]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[2])); } - - return KSFT_PASS; } -static int vdso_test_clock_getres(clockid_t clk_id) +static void vdso_test_clock_getres(clockid_t clk_id) { + int clock_getres_fail = 0; + /* Find clock_getres. */ vdso_clock_getres_t vdso_clock_getres = (vdso_clock_getres_t)vdso_sym(version, name[3]); if (!vdso_clock_getres) { - printf("Could not find %s\n", name[3]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[3])); + return; } struct timespec ts, sys_ts; long ret = vdso_clock_getres(clk_id, &ts); if (ret == 0) { - printf("The resolution is %lld %lld\n", - (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_print_msg("The vdso resolution is %lld %lld\n", + (long long)ts.tv_sec, (long long)ts.tv_nsec); } else { - printf("%s failed\n", name[3]); - return KSFT_FAIL; + clock_getres_fail++; } ret = syscall(SYS_clock_getres, clk_id, &sys_ts); - if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) { - printf("%s failed\n", name[3]); - return KSFT_FAIL; - } + ksft_print_msg("The syscall resolution is %lld %lld\n", + (long long)sys_ts.tv_sec, (long long)sys_ts.tv_nsec); - return KSFT_PASS; + if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) + clock_getres_fail++; + + if (clock_getres_fail > 0) { + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[3])); + } else { + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); + } } const char *vdso_clock_name[12] = { @@ -158,36 +162,23 @@ const char *vdso_clock_name[12] = { * This function calls vdso_test_clock_gettime and vdso_test_clock_getres * with different values for clock_id. */ -static inline int vdso_test_clock(clockid_t clock_id) +static inline void vdso_test_clock(clockid_t clock_id) { - int ret0, ret1; - - ret0 = vdso_test_clock_gettime(clock_id); - /* A skipped test is considered passed */ - if (ret0 == KSFT_SKIP) - ret0 = KSFT_PASS; - - ret1 = vdso_test_clock_getres(clock_id); - /* A skipped test is considered passed */ - if (ret1 == KSFT_SKIP) - ret1 = KSFT_PASS; + ksft_print_msg("\nclock_id: %s\n", vdso_clock_name[clock_id]); - ret0 += ret1; + vdso_test_clock_gettime(clock_id); - printf("clock_id: %s", vdso_clock_name[clock_id]); - - if (ret0 > 0) - printf(" [FAIL]\n"); - else - printf(" [PASS]\n"); - - return ret0; + vdso_test_clock_getres(clock_id); } +#define VDSO_TEST_PLAN 16 + int main(int argc, char **argv) { unsigned long sysinfo_ehdr = getauxval(AT_SYSINFO_EHDR); - int ret; + + ksft_print_header(); + ksft_set_plan(VDSO_TEST_PLAN); if (!sysinfo_ehdr) { printf("AT_SYSINFO_EHDR is not present!\n"); @@ -201,44 +192,42 @@ int main(int argc, char **argv) vdso_init_from_sysinfo_ehdr(getauxval(AT_SYSINFO_EHDR)); - ret = vdso_test_gettimeofday(); + vdso_test_gettimeofday(); #if _POSIX_TIMERS > 0 #ifdef CLOCK_REALTIME - ret += vdso_test_clock(CLOCK_REALTIME); + vdso_test_clock(CLOCK_REALTIME); #endif #ifdef CLOCK_BOOTTIME - ret += vdso_test_clock(CLOCK_BOOTTIME); + vdso_test_clock(CLOCK_BOOTTIME); #endif #ifdef CLOCK_TAI - ret += vdso_test_clock(CLOCK_TAI); + vdso_test_clock(CLOCK_TAI); #endif #ifdef CLOCK_REALTIME_COARSE - ret += vdso_test_clock(CLOCK_REALTIME_COARSE); + vdso_test_clock(CLOCK_REALTIME_COARSE); #endif #ifdef CLOCK_MONOTONIC - ret += vdso_test_clock(CLOCK_MONOTONIC); + vdso_test_clock(CLOCK_MONOTONIC); #endif #ifdef CLOCK_MONOTONIC_RAW - ret += vdso_test_clock(CLOCK_MONOTONIC_RAW); + vdso_test_clock(CLOCK_MONOTONIC_RAW); #endif #ifdef CLOCK_MONOTONIC_COARSE - ret += vdso_test_clock(CLOCK_MONOTONIC_COARSE); + vdso_test_clock(CLOCK_MONOTONIC_COARSE); #endif #endif - ret += vdso_test_time(); - - if (ret > 0) - return KSFT_FAIL; + vdso_test_time(); - return KSFT_PASS; + ksft_print_cnts(); + return ksft_get_fail_cnt() == 0 ? KSFT_PASS : KSFT_FAIL; } -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.15 14/36] selftests: skip mincore.check_file_mmap when fs lacks needed support

by Sasha Levin

From: Cristian Marussi <cristian.marussi(a)arm.com> [ Upstream commit dae1d8ac31896988e7313384c0370176a75e9b45 ] Report mincore.check_file_mmap as SKIP instead of FAIL if the underlying filesystem lacks support of O_TMPFILE or fallocate since such failures are not really related to mincore functionality. Cc: Ricardo Cañuelo <ricardo.canuelo(a)collabora.com> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/mincore/mincore_selftest.c | 20 +++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/mincore/mincore_selftest.c b/tools/testing/selftests/mincore/mincore_selftest.c index e54106643337b..4c88238fc8f05 100644 --- a/tools/testing/selftests/mincore/mincore_selftest.c +++ b/tools/testing/selftests/mincore/mincore_selftest.c @@ -207,15 +207,21 @@ TEST(check_file_mmap) errno = 0; fd = open(".", O_TMPFILE | O_RDWR, 0600); - ASSERT_NE(-1, fd) { - TH_LOG("Can't create temporary file: %s", - strerror(errno)); + if (fd < 0) { + ASSERT_EQ(errno, EOPNOTSUPP) { + TH_LOG("Can't create temporary file: %s", + strerror(errno)); + } + SKIP(goto out_free, "O_TMPFILE not supported by filesystem."); } errno = 0; retval = fallocate(fd, 0, 0, FILE_SIZE); - ASSERT_EQ(0, retval) { - TH_LOG("Error allocating space for the temporary file: %s", - strerror(errno)); + if (retval) { + ASSERT_EQ(errno, EOPNOTSUPP) { + TH_LOG("Error allocating space for the temporary file: %s", + strerror(errno)); + } + SKIP(goto out_close, "fallocate not supported by filesystem."); } /* @@ -271,7 +277,9 @@ TEST(check_file_mmap) } munmap(addr, FILE_SIZE); +out_close: close(fd); +out_free: free(vec); } -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.15 13/36] selftests: openat2: Skip testcases that fail with EOPNOTSUPP

by Sasha Levin

From: Cristian Marussi <cristian.marussi(a)arm.com> [ Upstream commit ac9e0a250bb155078601a5b999aab05f2a04d1ab ] Skip testcases that fail since the requested valid flags combination is not supported by the underlying filesystem. Cc: Aleksa Sarai <cyphar(a)cyphar.com> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/openat2/openat2_test.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/openat2/openat2_test.c b/tools/testing/selftests/openat2/openat2_test.c index 1bddbe934204c..7fb902099de45 100644 --- a/tools/testing/selftests/openat2/openat2_test.c +++ b/tools/testing/selftests/openat2/openat2_test.c @@ -259,6 +259,16 @@ void test_openat2_flags(void) unlink(path); fd = sys_openat2(AT_FDCWD, path, &test->how); + if (fd < 0 && fd == -EOPNOTSUPP) { + /* + * Skip the testcase if it failed because not supported + * by FS. (e.g. a valid O_TMPFILE combination on NFS) + */ + ksft_test_result_skip("openat2 with %s fails with %d (%s)\n", + test->name, fd, strerror(-fd)); + goto next; + } + if (test->err >= 0) failed = (fd < 0); else @@ -303,7 +313,7 @@ void test_openat2_flags(void) else resultfn("openat2 with %s fails with %d (%s)\n", test->name, test->err, strerror(-test->err)); - +next: free(fdpath); fflush(stdout); } -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.15 12/36] selftests: openat2: Add missing dependency in Makefile

by Sasha Levin

From: Cristian Marussi <cristian.marussi(a)arm.com> [ Upstream commit ea3396725aa143dd42fe388cb67e44c90d2fb719 ] Add a dependency on header helpers.h to the main target; while at that add to helpers.h also a missing include for bool types. Cc: Aleksa Sarai <cyphar(a)cyphar.com> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/openat2/Makefile | 2 +- tools/testing/selftests/openat2/helpers.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/openat2/Makefile b/tools/testing/selftests/openat2/Makefile index 4b93b1417b862..843ba56d8e49e 100644 --- a/tools/testing/selftests/openat2/Makefile +++ b/tools/testing/selftests/openat2/Makefile @@ -5,4 +5,4 @@ TEST_GEN_PROGS := openat2_test resolve_test rename_attack_test include ../lib.mk -$(TEST_GEN_PROGS): helpers.c +$(TEST_GEN_PROGS): helpers.c helpers.h diff --git a/tools/testing/selftests/openat2/helpers.h b/tools/testing/selftests/openat2/helpers.h index ad5d0ba5b6ce9..7056340b9339e 100644 --- a/tools/testing/selftests/openat2/helpers.h +++ b/tools/testing/selftests/openat2/helpers.h @@ -9,6 +9,7 @@ #define _GNU_SOURCE #include <stdint.h> +#include <stdbool.h> #include <errno.h> #include <linux/types.h> #include "../kselftest.h" -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.15 11/36] selftests: openat2: Print also errno in failure messages

by Sasha Levin

From: Cristian Marussi <cristian.marussi(a)arm.com> [ Upstream commit e051cdf655fa016692008a446a060eff06222bb5 ] In E_func() macro, on error, print also errno in order to aid debugging. Cc: Aleksa Sarai <cyphar(a)cyphar.com> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/openat2/helpers.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/openat2/helpers.h b/tools/testing/selftests/openat2/helpers.h index a6ea27344db2d..ad5d0ba5b6ce9 100644 --- a/tools/testing/selftests/openat2/helpers.h +++ b/tools/testing/selftests/openat2/helpers.h @@ -62,11 +62,12 @@ bool needs_openat2(const struct open_how *how); (similar to chroot(2)). */ #endif /* RESOLVE_IN_ROOT */ -#define E_func(func, ...) \ - do { \ - if (func(__VA_ARGS__) < 0) \ - ksft_exit_fail_msg("%s:%d %s failed\n", \ - __FILE__, __LINE__, #func);\ +#define E_func(func, ...) \ + do { \ + errno = 0; \ + if (func(__VA_ARGS__) < 0) \ + ksft_exit_fail_msg("%s:%d %s failed - errno:%d\n", \ + __FILE__, __LINE__, #func, errno); \ } while (0) #define E_asprintf(...) E_func(asprintf, __VA_ARGS__) -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.15 10/36] selftests/zram: Adapt the situation that /dev/zram0 is being used

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram.sh | 15 +--- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++---------- 4 files changed, 66 insertions(+), 63 deletions(-) diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec4547..b0b91d9b0dc21 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh" -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh run_zram () { @@ -18,14 +15,4 @@ echo "" check_prereqs -# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index e9e9eb777e2c7..8f4affe34f3e4 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,7 +33,7 @@ zram_algs="lzo" zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -67,7 +67,6 @@ zram_mount zram_fill_fs zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index e83b404807c09..2418b0c4ed136 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -36,7 +36,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index f47fc0f27e99e..21ec1966de76c 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -5,10 +5,12 @@ # Author: Alexey Kodanev <alexey.kodanev(a)oracle.com> # Modified: Naresh Kamboju <naresh.kamboju(a)linaro.org> -MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -46,57 +48,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done - for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done -} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi -zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi } zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi - if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" } zram_max_streams() @@ -110,7 +127,7 @@ zram_max_streams() return 0 fi - local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -122,7 +139,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream" i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done echo "zram max streams: OK" @@ -132,15 +149,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm" - local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done echo "zram set compression algorithm: OK" @@ -149,14 +167,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set disksizes: OK" @@ -166,14 +184,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set memory limit: OK" @@ -182,8 +200,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -206,7 +224,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -220,7 +238,7 @@ zram_swapoff() zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -239,7 +257,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \ -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.15 09/36] selftests/zram01.sh: Fix compression ratio calculation

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram01.sh | 30 +++++++------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index 114863d9fb876..e9e9eb777e2c7 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,8 +33,6 @@ zram_algs="lzo" zram_fill_fs() { - local mem_free0=$(free -m | awk 'NR==2 {print $4}') - for i in $(seq 0 $(($dev_num - 1))); do echo "fill zram$i..." local b=0 @@ -45,29 +43,17 @@ zram_fill_fs() b=$(($b + 1)) done echo "zram$i can be filled with '$b' KB" - done - local mem_free1=$(free -m | awk 'NR==2 {print $4}') - local used_mem=$(($mem_free0 - $mem_free1)) + local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"` + local v=$((100 * 1024 * $b / $mem_used_total)) + if [ "$v" -lt 100 ]; then + echo "FAIL compression ratio: 0.$v:1" + ERR_CODE=-1 + return + fi - local total_size=0 - for sm in $zram_sizes; do - local s=$(echo $sm | sed 's/M//') - total_size=$(($total_size + $s)) + echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" done - - echo "zram used ${used_mem}M, zram disk sizes ${total_size}M" - - local v=$((100 * $total_size / $used_mem)) - - if [ "$v" -lt 100 ]; then - echo "FAIL compression ratio: 0.$v:1" - ERR_CODE=-1 - zram_cleanup - return - fi - - echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" } check_prereqs -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.15 08/36] selftests/zram: Skip max_comp_streams interface on newer kernel

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 6f872f266fd11..f47fc0f27e99e 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -11,6 +11,9 @@ dev_mounted=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -25,6 +28,20 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -86,6 +103,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)" + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" -- 2.34.1

3 years, 7 months

1
0
0 0

[PATCH AUTOSEL 5.15 06/36] selftests: netfilter: check stateless nat udp checksum fixup

by Sasha Levin

From: Florian Westphal <fw(a)strlen.de> [ Upstream commit aad51ca71ad83273e8826d6cfdcf53c98748d1fa ] Add a test that sends large udp packet (which is fragmented) via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4' and check that the datagram is received by peer. On kernels without commit 4e1860a38637 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")', this will fail with: cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty -rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS -rw------- 1 root root 0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF ERROR: in and output file mismatch when checking udp with stateless nat FAIL: nftables v1.0.0 (Fearless Fosdick #2) On patched kernels, this will show: PASS: IP statless for ns2-PFp89amx Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/netfilter/nft_nat.sh | 152 +++++++++++++++++++ 1 file changed, 152 insertions(+) diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh index da1c1e4b6c86b..781fa2d9ea9d5 100755 --- a/tools/testing/selftests/netfilter/nft_nat.sh +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -885,6 +885,144 @@ EOF ip netns exec "$ns0" nft delete table $family nat } +test_stateless_nat_ip() +{ + local lret=0 + + ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping $ns1 from $ns2 before loading stateless rules" + return 1 + fi + +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table ip stateless { + map xlate_in { + typeof meta iifname . ip saddr . ip daddr : ip daddr + elements = { + "veth1" . 10.0.2.99 . 10.0.1.99 : 10.0.2.2, + } + } + map xlate_out { + typeof meta iifname . ip saddr . ip daddr : ip daddr + elements = { + "veth0" . 10.0.1.99 . 10.0.2.2 : 10.0.2.99 + } + } + + chain prerouting { + type filter hook prerouting priority -400; policy accept; + ip saddr set meta iifname . ip saddr . ip daddr map @xlate_in + ip daddr set meta iifname . ip saddr . ip daddr map @xlate_out + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add ip statless rules" + return $ksft_skip + fi + + reset_counters + + ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping $ns1 from $ns2 with stateless rules" + lret=1 + fi + + # ns1 should have seen packets from .2.2, due to stateless rewrite. + expect="packets 1 bytes 84" + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns1" ns0insl "$expect" "test_stateless 1" + lret=1 + fi + + for dir in "in" "out" ; do + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns2" ns1$dir "$expect" "test_stateless 2" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns1" ns0$dir "$expect" "test_stateless 3" + lret=1 + fi + + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns0" ns1$dir "$expect" "test_stateless 4" + lret=1 + fi + done + + reset_counters + + socat -h > /dev/null 2>&1 + if [ $? -ne 0 ];then + echo "SKIP: Could not run stateless nat frag test without socat tool" + if [ $lret -eq 0 ]; then + return $ksft_skip + fi + + ip netns exec "$ns0" nft delete table ip stateless + return $lret + fi + + local tmpfile=$(mktemp) + dd if=/dev/urandom of=$tmpfile bs=4096 count=1 2>/dev/null + + local outfile=$(mktemp) + ip netns exec "$ns1" timeout 3 socat -u UDP4-RECV:4233 OPEN:$outfile < /dev/null & + sc_r=$! + + sleep 1 + # re-do with large ping -> ip fragmentation + ip netns exec "$ns2" timeout 3 socat - UDP4-SENDTO:"10.0.1.99:4233" < "$tmpfile" > /dev/null + if [ $? -ne 0 ] ; then + echo "ERROR: failed to test udp $ns1 to $ns2 with stateless ip nat" 1>&2 + lret=1 + fi + + wait + + cmp "$tmpfile" "$outfile" + if [ $? -ne 0 ]; then + ls -l "$tmpfile" "$outfile" + echo "ERROR: in and output file mismatch when checking udp with stateless nat" 1>&2 + lret=1 + fi + + rm -f "$tmpfile" "$outfile" + + # ns1 should have seen packets from 2.2, due to stateless rewrite. + expect="packets 3 bytes 4164" + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns1" ns0insl "$expect" "test_stateless 5" + lret=1 + fi + + ip netns exec "$ns0" nft delete table ip stateless + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete table ip stateless" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP statless for $ns2" + + return $lret +} + # ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 for i in 0 1 2; do ip netns exec ns$i-$sfx nft -f /dev/stdin <<EOF @@ -951,6 +1089,19 @@ table inet filter { EOF done +# special case for stateless nat check, counter needs to +# be done before (input) ip defragmentation +ip netns exec ns1-$sfx nft -f /dev/stdin <<EOF +table inet filter { + counter ns0insl {} + + chain pre { + type filter hook prerouting priority -400; policy accept; + ip saddr 10.0.2.2 counter name "ns0insl" + } +} +EOF + sleep 3 # test basic connectivity for i in 1 2; do @@ -1005,6 +1156,7 @@ $test_inet_nat && test_redirect inet $test_inet_nat && test_redirect6 inet test_port_shadowing +test_stateless_nat_ip if [ $ret -ne 0 ];then echo -n "FAIL: " -- 2.34.1

3 years, 7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror