- Linux-kselftest-mirror - lists.linaro.org

[PATCH] selftests/bpf: Convert comma to semicolon

by Chen Ni

Replace comma between expressions with semicolons. Using a ',' in place of a ';' can have unintended side effects. Although that is not the case here, it is seems best to use ';' unless ',' is intended. Found by inspection. No functional change intended. Compile tested only. Signed-off-by: Chen Ni <nichen(a)iscas.ac.cn> --- tools/testing/selftests/bpf/test_kmods/bpf_testmod.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/test_kmods/bpf_testmod.c b/tools/testing/selftests/bpf/test_kmods/bpf_testmod.c index 3220f1d28697..f38eaf0d35ef 100644 --- a/tools/testing/selftests/bpf/test_kmods/bpf_testmod.c +++ b/tools/testing/selftests/bpf/test_kmods/bpf_testmod.c @@ -1340,7 +1340,7 @@ static int st_ops_gen_prologue_with_kfunc(struct bpf_insn *insn_buf, bool direct *insn++ = BPF_STX_MEM(BPF_DW, BPF_REG_6, BPF_REG_7, offsetof(struct st_ops_args, a)); *insn++ = BPF_JMP_IMM(BPF_JA, 0, 0, 2); *insn++ = BPF_MOV64_REG(BPF_REG_1, BPF_REG_0); - *insn++ = BPF_CALL_KFUNC(0, bpf_cgroup_release_id), + *insn++ = BPF_CALL_KFUNC(0, bpf_cgroup_release_id); *insn++ = BPF_MOV64_REG(BPF_REG_1, BPF_REG_8); *insn++ = prog->insnsi[0]; @@ -1379,7 +1379,7 @@ static int st_ops_gen_epilogue_with_kfunc(struct bpf_insn *insn_buf, const struc *insn++ = BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_6, offsetof(struct st_ops_args, a)); *insn++ = BPF_JMP_IMM(BPF_JA, 0, 0, 2); *insn++ = BPF_MOV64_REG(BPF_REG_1, BPF_REG_0); - *insn++ = BPF_CALL_KFUNC(0, bpf_cgroup_release_id), + *insn++ = BPF_CALL_KFUNC(0, bpf_cgroup_release_id); *insn++ = BPF_MOV64_REG(BPF_REG_0, BPF_REG_6); *insn++ = BPF_ALU64_IMM(BPF_MUL, BPF_REG_0, 2); *insn++ = BPF_EXIT_INSN(); -- 2.25.1

6 months, 1 week

3
2
0 0

[PATCH net] selftests: net: amt: indicate progress in the stress test

by Jakub Kicinski

Our CI expects output from the test at least once every 10 minutes. The AMT test when running on debug kernel is just on the edge of that time for the stress test. Improve the output: - print the name of the test first, before starting it, - output a dot every 10% of the way. Output after: TEST: amt discovery [ OK ] TEST: IPv4 amt multicast forwarding [ OK ] TEST: IPv6 amt multicast forwarding [ OK ] TEST: IPv4 amt traffic forwarding torture .......... [ OK ] TEST: IPv6 amt traffic forwarding torture .......... [ OK ] Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- Since net-next is closed I'm sending this for net. We enabled DEBUG_PREEMPT in the debug flavor and the test now times out most of the time. CC: ap420073(a)gmail.com CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/amt.sh | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/net/amt.sh b/tools/testing/selftests/net/amt.sh index d458b45c775b..3ef209cacb8e 100755 --- a/tools/testing/selftests/net/amt.sh +++ b/tools/testing/selftests/net/amt.sh @@ -194,15 +194,21 @@ test_remote_ip() send_mcast_torture4() { - ip netns exec "${SOURCE}" bash -c \ - 'cat /dev/urandom | head -c 1G | nc -w 1 -u 239.0.0.1 4001' + for i in `seq 10`; do + ip netns exec "${SOURCE}" bash -c \ + 'cat /dev/urandom | head -c 100M | nc -w 1 -u 239.0.0.1 4001' + echo -n "." + done } send_mcast_torture6() { - ip netns exec "${SOURCE}" bash -c \ - 'cat /dev/urandom | head -c 1G | nc -w 1 -u ff0e::5:6 6001' + for i in `seq 10`; do + ip netns exec "${SOURCE}" bash -c \ + 'cat /dev/urandom | head -c 100M | nc -w 1 -u ff0e::5:6 6001' + echo -n "." + done } check_features() @@ -278,10 +284,12 @@ wait $pid || err=$? if [ $err -eq 1 ]; then ERR=1 fi +printf "TEST: %-50s" "IPv4 amt traffic forwarding torture" send_mcast_torture4 -printf "TEST: %-60s [ OK ]\n" "IPv4 amt traffic forwarding torture" +printf " [ OK ]\n" +printf "TEST: %-50s" "IPv6 amt traffic forwarding torture" send_mcast_torture6 -printf "TEST: %-60s [ OK ]\n" "IPv6 amt traffic forwarding torture" +printf " [ OK ]\n" sleep 5 if [ "${ERR}" -eq 1 ]; then echo "Some tests failed." >&2 -- 2.49.0

6 months, 1 week

3
2
0 0

posix_timers kself test failed in 6.12.y

by ALOK TIWARI

Hi Thomas Following posix_timers kself test failed in 6.12.y ------------------------- not ok 7 check_sig_ign SIGEV_SIGNAL not ok 9 check_rearm not ok 10 check_delete ------------------------- Reason of failure: 6.12.y does not support these KSELT tests, Because the following commits were not backported in 6.12.y: 6017a158beb: "posix-timers: Embed sigqueue in struct k_itimer" 69f032c92cf: "signal: Provide ignored_posix_timers list" is it feasible to backport in these commits or complete series of patch in 6.12.y ( [patch V7 00/21] posix-timers: Cure the SIG_IGN mess) 6017a158beb: "posix-timers: Embed sigqueue in struct k_itimer" 69f032c92cf8: "signal: Provide ignored_posix_timers list" if not, we shall revert following kself test from 6.12.y 45c4225c3dcc "selftests/timers/posix_timers: Add SIG_IGN test" e65bb03e4427 "selftests/timers/posix_timers: Validate signal rules" Thanks, Alok

6 months, 1 week

1
0
0 0

[PATCH net 0/2] fix wrong hds-thresh value setting

by Taehee Yoo

A hds-thresh value is not set correctly if input value is 0. The cause is that ethtool_ringparam_get_cfg(), which is a internal function that returns ringparameters from both ->get_ringparam() and dev->cfg can't return a correct hds-thresh value. The first patch fixes ethtool_ringparam_get_cfg() to set hds-thresh value correcltly. The second patch adds random test for hds-thresh value. So that we can test 0 value for a hds-thresh properly. Taehee Yoo (2): net: ethtool: fix ethtool_ringparam_get_cfg() returns a hds_thresh value always as 0. selftests: drv-net: test random value for hds-thresh net/ethtool/common.c | 1 + tools/testing/selftests/drivers/net/hds.py | 28 +++++++++++++++++++++- 2 files changed, 28 insertions(+), 1 deletion(-) -- 2.34.1

6 months, 1 week

1
3
0 0

[PATCH bpf v2 0/2] bpf, xdp: clean adjust_{head,meta} memory when offset < 0

by Jiayuan Chen

This patchset originates from my attempt to resolve a KMSAN warning that has existed for over 3 years: https://syzkaller.appspot.com/bug?extid=0e6ddb1ef80986bdfe64 Previously, we had a brief discussion in this thread about whether we can simply perform memset in adjust_{head,meta}: https://lore.kernel.org/netdev/20250328043941.085de23b@kernel.org/T/#t Unfortunately, I couldn't find a similar topic in the mail list, but I did find a similar security-related commit: commit 6dfb970d3dbd ("xdp: avoid leaking info stored in frame data on page reuse") I just create a new topic here and make subject more clear, we can discuss this here. Meanwhile, I also discovered a related issue that led to a CVE,specifically the Facebook Katran vulnerability (https://vuldb.com/?id.246309). Currently, even with unprivileged functionality disabled, a user can load a BPF program using CAP_BPF and CAP_NET_ADMIN, which I believe we should avoid exposing kernel memory directly to users now. Regarding performance considerations, I added corresponding results to the selftest, testing common MAC headers and IP headers of various sizes. Compared to not using memset, the execution time increased by 2ns, but I think this is negligible considering the entire net stack. Jiayuan Chen (2): bpf, xdp: clean head/meta when expanding it selftests/bpf: add perf test for adjust_{head,meta} include/uapi/linux/bpf.h | 8 +-- net/core/filter.c | 5 +- tools/include/uapi/linux/bpf.h | 6 ++- .../selftests/bpf/prog_tests/xdp_perf.c | 52 ++++++++++++++++--- tools/testing/selftests/bpf/progs/xdp_dummy.c | 14 +++++ 5 files changed, 72 insertions(+), 13 deletions(-) -- 2.47.1

6 months, 1 week

5
10
0 0

[PATCH AUTOSEL 6.12 01/20] selftests/bpf: Fix stdout race condition in traffic monitor

by Sasha Levin

From: Amery Hung <ameryhung(a)gmail.com> [ Upstream commit b99f27e90268b1a814c13f8bd72ea1db448ea257 ] Fix a race condition between the main test_progs thread and the traffic monitoring thread. The traffic monitor thread tries to print a line using multiple printf and use flockfile() to prevent the line from being torn apart. Meanwhile, the main thread doing io redirection can reassign or close stdout when going through tests. A deadlock as shown below can happen. main traffic_monitor_thread ==== ====================== show_transport() -> flockfile(stdout) stdio_hijack_init() -> stdout = open_memstream(log_buf, log_cnt); ... env.subtest_state->stdout_saved = stdout; ... funlockfile(stdout) stdio_restore_cleanup() -> fclose(env.subtest_state->stdout_saved); After the traffic monitor thread lock stdout, A new memstream can be assigned to stdout by the main thread. Therefore, the traffic monitor thread later will not be able to unlock the original stdout. As the main thread tries to access the old stdout, it will hang indefinitely as it is still locked by the traffic monitor thread. The deadlock can be reproduced by running test_progs repeatedly with traffic monitor enabled: for ((i=1;i<=100;i++)); do ./test_progs -a flow_dissector_skb* -m '*' done Fix this by only calling printf once and remove flockfile()/funlockfile(). Signed-off-by: Amery Hung <ameryhung(a)gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau(a)kernel.org> Link: https://patch.msgid.link/20250213233217.553258-1-ameryhung@gmail.com Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/network_helpers.c | 33 ++++++++----------- 1 file changed, 13 insertions(+), 20 deletions(-) diff --git a/tools/testing/selftests/bpf/network_helpers.c b/tools/testing/selftests/bpf/network_helpers.c index 27784946b01b8..af0ee70a53f9f 100644 --- a/tools/testing/selftests/bpf/network_helpers.c +++ b/tools/testing/selftests/bpf/network_helpers.c @@ -771,12 +771,13 @@ static const char *pkt_type_str(u16 pkt_type) return "Unknown"; } +#define MAX_FLAGS_STRLEN 21 /* Show the information of the transport layer in the packet */ static void show_transport(const u_char *packet, u16 len, u32 ifindex, const char *src_addr, const char *dst_addr, u16 proto, bool ipv6, u8 pkt_type) { - char *ifname, _ifname[IF_NAMESIZE]; + char *ifname, _ifname[IF_NAMESIZE], flags[MAX_FLAGS_STRLEN] = ""; const char *transport_str; u16 src_port, dst_port; struct udphdr *udp; @@ -817,29 +818,21 @@ static void show_transport(const u_char *packet, u16 len, u32 ifindex, /* TCP or UDP*/ - flockfile(stdout); + if (proto == IPPROTO_TCP) + snprintf(flags, MAX_FLAGS_STRLEN, "%s%s%s%s", + tcp->fin ? ", FIN" : "", + tcp->syn ? ", SYN" : "", + tcp->rst ? ", RST" : "", + tcp->ack ? ", ACK" : ""); + if (ipv6) - printf("%-7s %-3s IPv6 %s.%d > %s.%d: %s, length %d", + printf("%-7s %-3s IPv6 %s.%d > %s.%d: %s, length %d%s\n", ifname, pkt_type_str(pkt_type), src_addr, src_port, - dst_addr, dst_port, transport_str, len); + dst_addr, dst_port, transport_str, len, flags); else - printf("%-7s %-3s IPv4 %s:%d > %s:%d: %s, length %d", + printf("%-7s %-3s IPv4 %s:%d > %s:%d: %s, length %d%s\n", ifname, pkt_type_str(pkt_type), src_addr, src_port, - dst_addr, dst_port, transport_str, len); - - if (proto == IPPROTO_TCP) { - if (tcp->fin) - printf(", FIN"); - if (tcp->syn) - printf(", SYN"); - if (tcp->rst) - printf(", RST"); - if (tcp->ack) - printf(", ACK"); - } - - printf("\n"); - funlockfile(stdout); + dst_addr, dst_port, transport_str, len, flags); } static void show_ipv6_packet(const u_char *packet, u32 ifindex, u8 pkt_type) -- 2.39.5

6 months, 1 week

1
0
0 0

[PATCH AUTOSEL 6.13 16/22] selftests/bpf: Fix cap_enable_effective() return code

by Sasha Levin

From: Feng Yang <yangfeng(a)kylinos.cn> [ Upstream commit 339c1f8ea11cc042c30c315c1a8f61e4b8a90117 ] The caller of cap_enable_effective() expects negative error code. Fix it. Before: failed to restore CAP_SYS_ADMIN: -1, Unknown error -1 After: failed to restore CAP_SYS_ADMIN: -3, No such process failed to restore CAP_SYS_ADMIN: -22, Invalid argument Signed-off-by: Feng Yang <yangfeng(a)kylinos.cn> Acked-by: Eduard Zingerman <eddyz87(a)gmail.com> Link: https://lore.kernel.org/r/20250305022234.44932-1-yangfeng59949@163.com Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/cap_helpers.c | 8 ++++---- tools/testing/selftests/bpf/cap_helpers.h | 1 + tools/testing/selftests/bpf/prog_tests/verifier.c | 4 ++-- tools/testing/selftests/bpf/test_loader.c | 6 +++--- 4 files changed, 10 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/bpf/cap_helpers.c b/tools/testing/selftests/bpf/cap_helpers.c index d5ac507401d7c..98f840c3a38f7 100644 --- a/tools/testing/selftests/bpf/cap_helpers.c +++ b/tools/testing/selftests/bpf/cap_helpers.c @@ -19,7 +19,7 @@ int cap_enable_effective(__u64 caps, __u64 *old_caps) err = capget(&hdr, data); if (err) - return err; + return -errno; if (old_caps) *old_caps = (__u64)(data[1].effective) << 32 | data[0].effective; @@ -32,7 +32,7 @@ int cap_enable_effective(__u64 caps, __u64 *old_caps) data[1].effective |= cap1; err = capset(&hdr, data); if (err) - return err; + return -errno; return 0; } @@ -49,7 +49,7 @@ int cap_disable_effective(__u64 caps, __u64 *old_caps) err = capget(&hdr, data); if (err) - return err; + return -errno; if (old_caps) *old_caps = (__u64)(data[1].effective) << 32 | data[0].effective; @@ -61,7 +61,7 @@ int cap_disable_effective(__u64 caps, __u64 *old_caps) data[1].effective &= ~cap1; err = capset(&hdr, data); if (err) - return err; + return -errno; return 0; } diff --git a/tools/testing/selftests/bpf/cap_helpers.h b/tools/testing/selftests/bpf/cap_helpers.h index 6d163530cb0fd..8dcb28557f762 100644 --- a/tools/testing/selftests/bpf/cap_helpers.h +++ b/tools/testing/selftests/bpf/cap_helpers.h @@ -4,6 +4,7 @@ #include <linux/types.h> #include <linux/capability.h> +#include <errno.h> #ifndef CAP_PERFMON #define CAP_PERFMON 38 diff --git a/tools/testing/selftests/bpf/prog_tests/verifier.c b/tools/testing/selftests/bpf/prog_tests/verifier.c index 3ee40ee9413a9..88cb75b65cecd 100644 --- a/tools/testing/selftests/bpf/prog_tests/verifier.c +++ b/tools/testing/selftests/bpf/prog_tests/verifier.c @@ -118,7 +118,7 @@ static void run_tests_aux(const char *skel_name, /* test_verifier tests are executed w/o CAP_SYS_ADMIN, do the same here */ err = cap_disable_effective(1ULL << CAP_SYS_ADMIN, &old_caps); if (err) { - PRINT_FAIL("failed to drop CAP_SYS_ADMIN: %i, %s\n", err, strerror(err)); + PRINT_FAIL("failed to drop CAP_SYS_ADMIN: %i, %s\n", err, strerror(-err)); return; } @@ -128,7 +128,7 @@ static void run_tests_aux(const char *skel_name, err = cap_enable_effective(old_caps, NULL); if (err) - PRINT_FAIL("failed to restore CAP_SYS_ADMIN: %i, %s\n", err, strerror(err)); + PRINT_FAIL("failed to restore CAP_SYS_ADMIN: %i, %s\n", err, strerror(-err)); } #define RUN(skel) run_tests_aux(#skel, skel##__elf_bytes, NULL) diff --git a/tools/testing/selftests/bpf/test_loader.c b/tools/testing/selftests/bpf/test_loader.c index 53b06647cf57d..8a403e5aa3145 100644 --- a/tools/testing/selftests/bpf/test_loader.c +++ b/tools/testing/selftests/bpf/test_loader.c @@ -773,7 +773,7 @@ static int drop_capabilities(struct cap_state *caps) err = cap_disable_effective(caps_to_drop, &caps->old_caps); if (err) { - PRINT_FAIL("failed to drop capabilities: %i, %s\n", err, strerror(err)); + PRINT_FAIL("failed to drop capabilities: %i, %s\n", err, strerror(-err)); return err; } @@ -790,7 +790,7 @@ static int restore_capabilities(struct cap_state *caps) err = cap_enable_effective(caps->old_caps, NULL); if (err) - PRINT_FAIL("failed to restore capabilities: %i, %s\n", err, strerror(err)); + PRINT_FAIL("failed to restore capabilities: %i, %s\n", err, strerror(-err)); caps->initialized = false; return err; } @@ -959,7 +959,7 @@ void run_subtest(struct test_loader *tester, if (subspec->caps) { err = cap_enable_effective(subspec->caps, NULL); if (err) { - PRINT_FAIL("failed to set capabilities: %i, %s\n", err, strerror(err)); + PRINT_FAIL("failed to set capabilities: %i, %s\n", err, strerror(-err)); goto subtest_cleanup; } } -- 2.39.5

6 months, 1 week

1
0
0 0

[PATCH AUTOSEL 6.13 02/22] selftests/bpf: Fix stdout race condition in traffic monitor

by Sasha Levin

From: Amery Hung <ameryhung(a)gmail.com> [ Upstream commit b99f27e90268b1a814c13f8bd72ea1db448ea257 ] Fix a race condition between the main test_progs thread and the traffic monitoring thread. The traffic monitor thread tries to print a line using multiple printf and use flockfile() to prevent the line from being torn apart. Meanwhile, the main thread doing io redirection can reassign or close stdout when going through tests. A deadlock as shown below can happen. main traffic_monitor_thread ==== ====================== show_transport() -> flockfile(stdout) stdio_hijack_init() -> stdout = open_memstream(log_buf, log_cnt); ... env.subtest_state->stdout_saved = stdout; ... funlockfile(stdout) stdio_restore_cleanup() -> fclose(env.subtest_state->stdout_saved); After the traffic monitor thread lock stdout, A new memstream can be assigned to stdout by the main thread. Therefore, the traffic monitor thread later will not be able to unlock the original stdout. As the main thread tries to access the old stdout, it will hang indefinitely as it is still locked by the traffic monitor thread. The deadlock can be reproduced by running test_progs repeatedly with traffic monitor enabled: for ((i=1;i<=100;i++)); do ./test_progs -a flow_dissector_skb* -m '*' done Fix this by only calling printf once and remove flockfile()/funlockfile(). Signed-off-by: Amery Hung <ameryhung(a)gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau(a)kernel.org> Link: https://patch.msgid.link/20250213233217.553258-1-ameryhung@gmail.com Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/network_helpers.c | 33 ++++++++----------- 1 file changed, 13 insertions(+), 20 deletions(-) diff --git a/tools/testing/selftests/bpf/network_helpers.c b/tools/testing/selftests/bpf/network_helpers.c index 27784946b01b8..af0ee70a53f9f 100644 --- a/tools/testing/selftests/bpf/network_helpers.c +++ b/tools/testing/selftests/bpf/network_helpers.c @@ -771,12 +771,13 @@ static const char *pkt_type_str(u16 pkt_type) return "Unknown"; } +#define MAX_FLAGS_STRLEN 21 /* Show the information of the transport layer in the packet */ static void show_transport(const u_char *packet, u16 len, u32 ifindex, const char *src_addr, const char *dst_addr, u16 proto, bool ipv6, u8 pkt_type) { - char *ifname, _ifname[IF_NAMESIZE]; + char *ifname, _ifname[IF_NAMESIZE], flags[MAX_FLAGS_STRLEN] = ""; const char *transport_str; u16 src_port, dst_port; struct udphdr *udp; @@ -817,29 +818,21 @@ static void show_transport(const u_char *packet, u16 len, u32 ifindex, /* TCP or UDP*/ - flockfile(stdout); + if (proto == IPPROTO_TCP) + snprintf(flags, MAX_FLAGS_STRLEN, "%s%s%s%s", + tcp->fin ? ", FIN" : "", + tcp->syn ? ", SYN" : "", + tcp->rst ? ", RST" : "", + tcp->ack ? ", ACK" : ""); + if (ipv6) - printf("%-7s %-3s IPv6 %s.%d > %s.%d: %s, length %d", + printf("%-7s %-3s IPv6 %s.%d > %s.%d: %s, length %d%s\n", ifname, pkt_type_str(pkt_type), src_addr, src_port, - dst_addr, dst_port, transport_str, len); + dst_addr, dst_port, transport_str, len, flags); else - printf("%-7s %-3s IPv4 %s:%d > %s:%d: %s, length %d", + printf("%-7s %-3s IPv4 %s:%d > %s:%d: %s, length %d%s\n", ifname, pkt_type_str(pkt_type), src_addr, src_port, - dst_addr, dst_port, transport_str, len); - - if (proto == IPPROTO_TCP) { - if (tcp->fin) - printf(", FIN"); - if (tcp->syn) - printf(", SYN"); - if (tcp->rst) - printf(", RST"); - if (tcp->ack) - printf(", ACK"); - } - - printf("\n"); - funlockfile(stdout); + dst_addr, dst_port, transport_str, len, flags); } static void show_ipv6_packet(const u_char *packet, u32 ifindex, u8 pkt_type) -- 2.39.5

6 months, 1 week

1
0
0 0

[PATCH AUTOSEL 6.14 17/23] selftests/bpf: Fix cap_enable_effective() return code

by Sasha Levin

From: Feng Yang <yangfeng(a)kylinos.cn> [ Upstream commit 339c1f8ea11cc042c30c315c1a8f61e4b8a90117 ] The caller of cap_enable_effective() expects negative error code. Fix it. Before: failed to restore CAP_SYS_ADMIN: -1, Unknown error -1 After: failed to restore CAP_SYS_ADMIN: -3, No such process failed to restore CAP_SYS_ADMIN: -22, Invalid argument Signed-off-by: Feng Yang <yangfeng(a)kylinos.cn> Acked-by: Eduard Zingerman <eddyz87(a)gmail.com> Link: https://lore.kernel.org/r/20250305022234.44932-1-yangfeng59949@163.com Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/cap_helpers.c | 8 ++++---- tools/testing/selftests/bpf/cap_helpers.h | 1 + tools/testing/selftests/bpf/prog_tests/verifier.c | 4 ++-- tools/testing/selftests/bpf/test_loader.c | 6 +++--- 4 files changed, 10 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/bpf/cap_helpers.c b/tools/testing/selftests/bpf/cap_helpers.c index d5ac507401d7c..98f840c3a38f7 100644 --- a/tools/testing/selftests/bpf/cap_helpers.c +++ b/tools/testing/selftests/bpf/cap_helpers.c @@ -19,7 +19,7 @@ int cap_enable_effective(__u64 caps, __u64 *old_caps) err = capget(&hdr, data); if (err) - return err; + return -errno; if (old_caps) *old_caps = (__u64)(data[1].effective) << 32 | data[0].effective; @@ -32,7 +32,7 @@ int cap_enable_effective(__u64 caps, __u64 *old_caps) data[1].effective |= cap1; err = capset(&hdr, data); if (err) - return err; + return -errno; return 0; } @@ -49,7 +49,7 @@ int cap_disable_effective(__u64 caps, __u64 *old_caps) err = capget(&hdr, data); if (err) - return err; + return -errno; if (old_caps) *old_caps = (__u64)(data[1].effective) << 32 | data[0].effective; @@ -61,7 +61,7 @@ int cap_disable_effective(__u64 caps, __u64 *old_caps) data[1].effective &= ~cap1; err = capset(&hdr, data); if (err) - return err; + return -errno; return 0; } diff --git a/tools/testing/selftests/bpf/cap_helpers.h b/tools/testing/selftests/bpf/cap_helpers.h index 6d163530cb0fd..8dcb28557f762 100644 --- a/tools/testing/selftests/bpf/cap_helpers.h +++ b/tools/testing/selftests/bpf/cap_helpers.h @@ -4,6 +4,7 @@ #include <linux/types.h> #include <linux/capability.h> +#include <errno.h> #ifndef CAP_PERFMON #define CAP_PERFMON 38 diff --git a/tools/testing/selftests/bpf/prog_tests/verifier.c b/tools/testing/selftests/bpf/prog_tests/verifier.c index 8a0e1ff8a2dc6..ecc320e045513 100644 --- a/tools/testing/selftests/bpf/prog_tests/verifier.c +++ b/tools/testing/selftests/bpf/prog_tests/verifier.c @@ -121,7 +121,7 @@ static void run_tests_aux(const char *skel_name, /* test_verifier tests are executed w/o CAP_SYS_ADMIN, do the same here */ err = cap_disable_effective(1ULL << CAP_SYS_ADMIN, &old_caps); if (err) { - PRINT_FAIL("failed to drop CAP_SYS_ADMIN: %i, %s\n", err, strerror(err)); + PRINT_FAIL("failed to drop CAP_SYS_ADMIN: %i, %s\n", err, strerror(-err)); return; } @@ -131,7 +131,7 @@ static void run_tests_aux(const char *skel_name, err = cap_enable_effective(old_caps, NULL); if (err) - PRINT_FAIL("failed to restore CAP_SYS_ADMIN: %i, %s\n", err, strerror(err)); + PRINT_FAIL("failed to restore CAP_SYS_ADMIN: %i, %s\n", err, strerror(-err)); } #define RUN(skel) run_tests_aux(#skel, skel##__elf_bytes, NULL) diff --git a/tools/testing/selftests/bpf/test_loader.c b/tools/testing/selftests/bpf/test_loader.c index 53b06647cf57d..8a403e5aa3145 100644 --- a/tools/testing/selftests/bpf/test_loader.c +++ b/tools/testing/selftests/bpf/test_loader.c @@ -773,7 +773,7 @@ static int drop_capabilities(struct cap_state *caps) err = cap_disable_effective(caps_to_drop, &caps->old_caps); if (err) { - PRINT_FAIL("failed to drop capabilities: %i, %s\n", err, strerror(err)); + PRINT_FAIL("failed to drop capabilities: %i, %s\n", err, strerror(-err)); return err; } @@ -790,7 +790,7 @@ static int restore_capabilities(struct cap_state *caps) err = cap_enable_effective(caps->old_caps, NULL); if (err) - PRINT_FAIL("failed to restore capabilities: %i, %s\n", err, strerror(err)); + PRINT_FAIL("failed to restore capabilities: %i, %s\n", err, strerror(-err)); caps->initialized = false; return err; } @@ -959,7 +959,7 @@ void run_subtest(struct test_loader *tester, if (subspec->caps) { err = cap_enable_effective(subspec->caps, NULL); if (err) { - PRINT_FAIL("failed to set capabilities: %i, %s\n", err, strerror(err)); + PRINT_FAIL("failed to set capabilities: %i, %s\n", err, strerror(-err)); goto subtest_cleanup; } } -- 2.39.5

6 months, 1 week

1
0
0 0

[PATCH AUTOSEL 6.14 02/23] selftests/bpf: Fix stdout race condition in traffic monitor

by Sasha Levin

From: Amery Hung <ameryhung(a)gmail.com> [ Upstream commit b99f27e90268b1a814c13f8bd72ea1db448ea257 ] Fix a race condition between the main test_progs thread and the traffic monitoring thread. The traffic monitor thread tries to print a line using multiple printf and use flockfile() to prevent the line from being torn apart. Meanwhile, the main thread doing io redirection can reassign or close stdout when going through tests. A deadlock as shown below can happen. main traffic_monitor_thread ==== ====================== show_transport() -> flockfile(stdout) stdio_hijack_init() -> stdout = open_memstream(log_buf, log_cnt); ... env.subtest_state->stdout_saved = stdout; ... funlockfile(stdout) stdio_restore_cleanup() -> fclose(env.subtest_state->stdout_saved); After the traffic monitor thread lock stdout, A new memstream can be assigned to stdout by the main thread. Therefore, the traffic monitor thread later will not be able to unlock the original stdout. As the main thread tries to access the old stdout, it will hang indefinitely as it is still locked by the traffic monitor thread. The deadlock can be reproduced by running test_progs repeatedly with traffic monitor enabled: for ((i=1;i<=100;i++)); do ./test_progs -a flow_dissector_skb* -m '*' done Fix this by only calling printf once and remove flockfile()/funlockfile(). Signed-off-by: Amery Hung <ameryhung(a)gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau(a)kernel.org> Link: https://patch.msgid.link/20250213233217.553258-1-ameryhung@gmail.com Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/network_helpers.c | 33 ++++++++----------- 1 file changed, 13 insertions(+), 20 deletions(-) diff --git a/tools/testing/selftests/bpf/network_helpers.c b/tools/testing/selftests/bpf/network_helpers.c index 80844a5fb1fee..95e943270f359 100644 --- a/tools/testing/selftests/bpf/network_helpers.c +++ b/tools/testing/selftests/bpf/network_helpers.c @@ -771,12 +771,13 @@ static const char *pkt_type_str(u16 pkt_type) return "Unknown"; } +#define MAX_FLAGS_STRLEN 21 /* Show the information of the transport layer in the packet */ static void show_transport(const u_char *packet, u16 len, u32 ifindex, const char *src_addr, const char *dst_addr, u16 proto, bool ipv6, u8 pkt_type) { - char *ifname, _ifname[IF_NAMESIZE]; + char *ifname, _ifname[IF_NAMESIZE], flags[MAX_FLAGS_STRLEN] = ""; const char *transport_str; u16 src_port, dst_port; struct udphdr *udp; @@ -817,29 +818,21 @@ static void show_transport(const u_char *packet, u16 len, u32 ifindex, /* TCP or UDP*/ - flockfile(stdout); + if (proto == IPPROTO_TCP) + snprintf(flags, MAX_FLAGS_STRLEN, "%s%s%s%s", + tcp->fin ? ", FIN" : "", + tcp->syn ? ", SYN" : "", + tcp->rst ? ", RST" : "", + tcp->ack ? ", ACK" : ""); + if (ipv6) - printf("%-7s %-3s IPv6 %s.%d > %s.%d: %s, length %d", + printf("%-7s %-3s IPv6 %s.%d > %s.%d: %s, length %d%s\n", ifname, pkt_type_str(pkt_type), src_addr, src_port, - dst_addr, dst_port, transport_str, len); + dst_addr, dst_port, transport_str, len, flags); else - printf("%-7s %-3s IPv4 %s:%d > %s:%d: %s, length %d", + printf("%-7s %-3s IPv4 %s:%d > %s:%d: %s, length %d%s\n", ifname, pkt_type_str(pkt_type), src_addr, src_port, - dst_addr, dst_port, transport_str, len); - - if (proto == IPPROTO_TCP) { - if (tcp->fin) - printf(", FIN"); - if (tcp->syn) - printf(", SYN"); - if (tcp->rst) - printf(", RST"); - if (tcp->ack) - printf(", ACK"); - } - - printf("\n"); - funlockfile(stdout); + dst_addr, dst_port, transport_str, len, flags); } static void show_ipv6_packet(const u_char *packet, u32 ifindex, u8 pkt_type) -- 2.39.5

6 months, 1 week

1
0
0 0

[PATCH net-next] net/selftests: Add loopback link local route for self-connect

by Dmitry Safonov via B4 Relay

From: Dmitry Safonov <0x7f454c46(a)gmail.com> self-connect-ipv6 got slightly flaky on netdev: > # timeout set to 120 > # selftests: net/tcp_ao: self-connect_ipv6 > # 1..5 > # # 708[lib/setup.c:250] rand seed 1742872572 > # TAP version 13 > # # 708[lib/proc.c:213] Snmp6 Ip6OutNoRoutes: 0 => 1 > # not ok 1 # error 708[self-connect.c:70] failed to connect() > # ok 2 No unexpected trace events during the test run > # # Planned tests != run tests (5 != 2) > # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:1 > ok 1 selftests: net/tcp_ao: self-connect_ipv6 I can not reproduce it on my machines, but judging by "Ip6OutNoRoutes" there is no route to the local_addr (::1). Looking at the kernel code, I see that kernel does add link-local address automatically in init_loopback(), but that is called from ipv6 notifier block. So, in turn the userspace that brought up the loopback interface may see rtnetlink ACK earlier than addrconf_notify() does it's job (at least, on a slow VM such as netdev). Probably, for ipv4 it's the same, judging by inetdev_event(). The fix is quite simple: set the link-local route straight after bringing the loopback interface. That will make it synchronous. Signed-off-by: Dmitry Safonov <0x7f454c46(a)gmail.com> --- Sorry to send this during the merge window, it's a test stability fix. It seems that netdev build bot has hit the issue a couple of times, but seems not hitting it constantly at this moment: https://netdev.bots.linux.dev/flakes.html?br-cnt=150&tn-needle=tcp-ao I'm marking it net-next, so that build bot carries it until the merge closes. If it's not fine, I can re-send it after the merge window. --- tools/testing/selftests/net/tcp_ao/self-connect.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/selftests/net/tcp_ao/self-connect.c b/tools/testing/selftests/net/tcp_ao/self-connect.c index 73b2f2276f3f5410aaa74bede7f366f81761bd6e..2c73bea698a677f9aedd7bec28f6e7fee7845d2e 100644 --- a/tools/testing/selftests/net/tcp_ao/self-connect.c +++ b/tools/testing/selftests/net/tcp_ao/self-connect.c @@ -16,6 +16,9 @@ static void __setup_lo_intf(const char *lo_intf, if (link_set_up(lo_intf)) test_error("Failed to bring %s up", lo_intf); + + if (ip_route_add(lo_intf, TEST_FAMILY, local_addr, local_addr)) + test_error("Failed to add a local route %s", lo_intf); } static void setup_lo_intf(const char *lo_intf) --- base-commit: 1a9239bb4253f9076b5b4b2a1a4e8d7defd77a95 change-id: 20250402-tcp-ao-selfconnect-flake-e0aabc03c076 Best regards, -- Dmitry Safonov <0x7f454c46(a)gmail.com>

6 months, 1 week

2
1
0 0

[PATCH bpf-next 00/11] bpf: Mitigate Spectre v1 using barriers

by Luis Gerhorst

This improves the expressiveness of unprivileged BPF by inserting speculation barriers instead of rejecting the programs. The approach was previously presented at LPC'24 [1] and RAID'24 [2]. To mitigate the Spectre v1 (PHT) vulnerability, the kernel rejects potentially-dangerous unprivileged BPF programs as of commit 9183671af6db ("bpf: Fix leakage under speculation on mispredicted branches"). In [2], we have analyzed 364 object files from open source projects (Linux Samples and Selftests, BCC, Loxilb, Cilium, libbpf Examples, Parca, and Prevail) and found that this affects 31% to 54% of programs. To resolve this in the majority of cases this patchset adds a fall-back for mitigating Spectre v1 using speculation barriers. The kernel still optimistically attempts to verify all speculative paths but uses speculation barriers against v1 when unsafe behavior is detected. This allows for more programs to be accepted without disabling the BPF Spectre mitigations (e.g., by setting cpu_mitigations_off()). In [1] we have measured the overhead of this approach relative to having mitigations off and including the upstream Spectre v4 mitigations. For event tracing and stack-sampling profilers, we found that mitigations increase BPF program execution time by 0% to 62%. For the Loxilb network load balancer, we have measured a 14% slowdown in SCTP performance but no significant slowdown for TCP. This overhead only applies to programs that were previously rejected. I reran the expressiveness-evaluation with v6.14 and made sure the main results still match those from [1] and [2] (which used v6.5). Main design decisions are: * Do not use separate bytecode insns for v1 and v4 barriers. This simplifies the verifier significantly and has the only downside that performance on PowerPC is not as high as it could be. * Allow archs to still disable v1/v4 mitigations separately by setting bpf_jit_bypass_spec_v1/v4(). This has the benefit that archs can benefit from improved BPF expressiveness / performance if they are not vulnerable (e.g., ARM64 for v4 in the kernel). * Do not remove the empty BPF_NOSPEC implementation for backends for which it is unknown whether they are vulnerable to Spectre v1. [1] https://lpc.events/event/18/contributions/1954/ ("Mitigating Spectre-PHT using Speculation Barriers in Linux eBPF") [2] https://arxiv.org/pdf/2405.00078 ("VeriFence: Lightweight and Precise Spectre Defenses for Untrusted Linux Kernel Extensions") Changes: * RFC -> v1: - rebase to bpf-next-250313 - tests: mark expected successes/new errors - add bpt_jit_bypass_spec_v1/v4() to avoid #ifdef in bpf_bypass_spec_v1/v4() - ensure that nospec with v1-support is implemented for archs for which GCC supports speculation barriers, except for MIPS - arm64: emit speculation barrier - powerpc: change nospec to include v1 barrier - discuss potential security (archs that do not impl. BPF nospec) and performance (only PowerPC) regressions RFC: https://lore.kernel.org/bpf/20250224203619.594724-1-luis.gerhorst@fau.de/ Luis Gerhorst (11): bpf: Move insn if/else into do_check_insn() bpf: Return -EFAULT on misconfigurations bpf: Return -EFAULT on internal errors bpf, arm64, powerpc: Add bpf_jit_bypass_spec_v1/v4() bpf, arm64, powerpc: Change nospec to include v1 barrier bpf: Rename sanitize_stack_spill to nospec_result bpf: Fall back to nospec for Spectre v1 bpf: Allow nospec-protected var-offset stack access bpf: Return PTR_ERR from push_stack() bpf: Fall back to nospec for sanitization-failures bpf: Fall back to nospec for spec path verification arch/arm64/net/bpf_jit.h | 5 + arch/arm64/net/bpf_jit_comp.c | 28 +- arch/powerpc/net/bpf_jit_comp64.c | 79 +- include/linux/bpf.h | 11 +- include/linux/bpf_verifier.h | 3 +- include/linux/filter.h | 2 +- kernel/bpf/core.c | 32 +- kernel/bpf/verifier.c | 723 ++++++++++-------- .../selftests/bpf/progs/verifier_and.c | 3 +- .../selftests/bpf/progs/verifier_bounds.c | 35 +- .../bpf/progs/verifier_bounds_deduction.c | 43 +- .../selftests/bpf/progs/verifier_map_ptr.c | 12 +- .../selftests/bpf/progs/verifier_movsx.c | 6 +- .../selftests/bpf/progs/verifier_unpriv.c | 3 +- .../bpf/progs/verifier_value_ptr_arith.c | 50 +- .../selftests/bpf/verifier/dead_code.c | 3 +- tools/testing/selftests/bpf/verifier/jmp32.c | 33 +- tools/testing/selftests/bpf/verifier/jset.c | 10 +- 18 files changed, 630 insertions(+), 451 deletions(-) base-commit: 46d38f489ef02175dcff1e03a849c226eb0729a6 -- 2.48.1

6 months, 1 week

3
22
0 0

[PATCH v2 0/5] KVM: guest_memfd: support for uffd minor

by Nikita Kalyazin

This series is built on top of Fuad's v7 "mapping guest_memfd backed memory at the host" [1]. With James's KVM userfault [2], it is possible to handle stage-2 faults in guest_memfd in userspace. However, KVM itself also triggers faults in guest_memfd in some cases, for example: PV interfaces like kvmclock, PV EOI and page table walking code when fetching the MMIO instruction on x86. It was agreed in the guest_memfd upstream call on 23 Jan 2025 [3] that KVM would be accessing those pages via userspace page tables. In order for such faults to be handled in userspace, guest_memfd needs to support userfaultfd. Changes since v1 [4]: - James, Peter: implement a full minor trap instead of a hybrid missing/minor trap - James, Peter: to avoid shmem- and guest_memfd-specific code in the UFFDIO_CONTINUE implementation make it generic by calling vm_ops->fault() While generalising UFFDIO_CONTINUE implementation helped avoid guest_memfd-specific code in mm/userfaulfd, userfaultfd still needs access to KVM code to be able to verify the VMA type when handling UFFDIO_REGISTER_MODE_MINOR, so I used a similar approach to what Fuad did for now [5]. In v1, Peter was mentioning a potential for eliminating taking a folio lock [6]. I did not implement that, but according to my testing, the performance of shmem minor fault handling stayed the same after the migration to calling vm_ops->fault() (tested on an x86). Before: ./demand_paging_test -u MINOR -s shmem Random seed: 0x6b8b4567 Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages guest physical test memory: [0x3fffbffff000, 0x3ffffffff000) Finished creating vCPUs and starting uffd threads Started all vCPUs All vCPU threads joined Total guest execution time: 10.979277020s Per-vcpu demand paging rate: 23876.253375 pgs/sec/vcpu Overall demand paging rate: 23876.253375 pgs/sec After: ./demand_paging_test -u MINOR -s shmem Random seed: 0x6b8b4567 Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages guest physical test memory: [0x3fffbffff000, 0x3ffffffff000) Finished creating vCPUs and starting uffd threads Started all vCPUs All vCPU threads joined Total guest execution time: 10.978893504s Per-vcpu demand paging rate: 23877.087423 pgs/sec/vcpu Overall demand paging rate: 23877.087423 pgs/sec Nikita [1] https://lore.kernel.org/kvm/20250318161823.4005529-1-tabba@google.com/T/ [2] https://lore.kernel.org/kvm/20250109204929.1106563-1-jthoughton@google.com/… [3] https://docs.google.com/document/d/1M6766BzdY1Lhk7LiR5IqVR8B8mG3cr-cxTxOrAo… [4] https://lore.kernel.org/kvm/20250303133011.44095-1-kalyazin@amazon.com/T/ [5] https://lore.kernel.org/kvm/20250318161823.4005529-1-tabba@google.com/T/#Z2… [6] https://lore.kernel.org/kvm/20250303133011.44095-1-kalyazin@amazon.com/T/#m… Nikita Kalyazin (5): mm: userfaultfd: generic continue for non hugetlbfs KVM: guest_memfd: add kvm_gmem_vma_is_gmem mm: userfaultfd: allow to register continue for guest_memfd KVM: guest_memfd: add support for userfaultfd minor KVM: selftests: test userfaultfd minor for guest_memfd include/linux/mm_types.h | 3 + include/linux/userfaultfd_k.h | 13 ++- mm/hugetlb.c | 2 +- mm/shmem.c | 3 +- mm/userfaultfd.c | 25 +++-- .../testing/selftests/kvm/guest_memfd_test.c | 94 +++++++++++++++++++ virt/kvm/guest_memfd.c | 15 +++ virt/kvm/kvm_mm.h | 1 + 8 files changed, 146 insertions(+), 10 deletions(-) base-commit: 3cc51efc17a2c41a480eed36b31c1773936717e0 -- 2.47.1

6 months, 1 week

2
11
0 0

[PATCH v2] selftests: riscv: fix v_exec_initval_nolibc.c

by Ignacio Encinas

Vector registers are zero initialized by the kernel. Stop accepting "all ones" as a clean value. Note that this was not working as expected given that value == 0xff can be assumed to be always false by the compiler as value's range is [-128, 127]. Both GCC (-Wtype-limits) and clang (-Wtautological-constant-out-of-range-compare) warn about this. Reviewed-by: Charlie Jenkins <charlie(a)rivosinc.com> Tested-by: Charlie Jenkins <charlie(a)rivosinc.com> Signed-off-by: Ignacio Encinas <ignacio(a)iencinas.com> --- Changes in v2: Remove code that becomes useless now that the only "clean" value for vector registers is 0. - Link to v1: https://lore.kernel.org/r/20250305-fix-v_exec_initval_nolibc-v1-1-b87b60e43… --- tools/testing/selftests/riscv/vector/v_exec_initval_nolibc.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/riscv/vector/v_exec_initval_nolibc.c b/tools/testing/selftests/riscv/vector/v_exec_initval_nolibc.c index 35c0812e32de0c82a54f84bd52c4272507121e35..4dde05e45a04122b566cedc36d20b072413b00e2 100644 --- a/tools/testing/selftests/riscv/vector/v_exec_initval_nolibc.c +++ b/tools/testing/selftests/riscv/vector/v_exec_initval_nolibc.c @@ -6,7 +6,7 @@ * the values. To further ensure consistency, this file is compiled without * libc and without auto-vectorization. * - * To be "clean" all values must be either all ones or all zeroes. + * To be "clean" all values must be all zeroes. */ #define __stringify_1(x...) #x @@ -14,9 +14,8 @@ int main(int argc, char **argv) { - char prev_value = 0, value; + char value = 0; unsigned long vl; - int first = 1; if (argc > 2 && strcmp(argv[2], "x")) asm volatile ( @@ -44,14 +43,11 @@ int main(int argc, char **argv) "vsrl.vi " __stringify(register) ", " __stringify(register) ", 8\n\t" \ ".option pop\n\t" \ : "=r" (value)); \ - if (first) { \ - first = 0; \ - } else if (value != prev_value || !(value == 0x00 || value == 0xff)) { \ + if (value != 0x00) { \ printf("Register " __stringify(register) \ " values not clean! value: %u\n", value); \ exit(-1); \ } \ - prev_value = value; \ } \ }) --- base-commit: 03d38806a902b36bf364cae8de6f1183c0a35a67 change-id: 20250301-fix-v_exec_initval_nolibc-498d976c372d Best regards, -- Ignacio Encinas <ignacio(a)iencinas.com>

6 months, 1 week

4
3
0 0

[PATCH 00/10] cgroup/cpuset: Miscellaneous partition bug fixes and enhancements

by Waiman Long

This patch series fixes a number of bugs in the cpuset partition code as well as improvement in remote partition handling. The test_cpuset_prs.sh is also enhanced to allow more vigorous remote partition testing. Waiman Long (10): cgroup/cpuset: Fix race between newly created partition and dying one cgroup/cpuset: Fix incorrect isolated_cpus update in update_parent_effective_cpumask() cgroup/cpuset: Fix error handling in remote_partition_disable() cgroup/cpuset: Remove remote_partition_check() & make update_cpumasks_hier() handle remote partition cgroup/cpuset: Don't allow creation of local partition over a remote one cgroup/cpuset: Code cleanup and comment update cgroup/cpuset: Remove unneeded goto in sched_partition_write() and rename it selftest/cgroup: Update test_cpuset_prs.sh to use | as effective CPUs and state separator selftest/cgroup: Clean up and restructure test_cpuset_prs.sh selftest/cgroup: Add a remote partition transition test to test_cpuset_prs.sh include/linux/cgroup-defs.h | 1 + include/linux/cgroup.h | 2 +- kernel/cgroup/cgroup.c | 6 + kernel/cgroup/cpuset-internal.h | 1 + kernel/cgroup/cpuset.c | 401 +++++++----- .../selftests/cgroup/test_cpuset_prs.sh | 617 ++++++++++++------ 6 files changed, 649 insertions(+), 379 deletions(-) -- 2.48.1

6 months, 1 week

4
23
0 0

[RFC PATCH security-next 0/4] Introducing Hornet LSM

by Blaise Boscaccy

This patch series introduces the Hornet LSM. Hornet takes a simple approach to light-skeleton-based eBPF signature verification. Signature data can be easily generated for the binary data that is generated via bpftool gen -L. This signature can be appended to a skeleton executable via scripts/sign-ebpf. Hornet checks the signature against a binary buffer containing the lskel instructions that the loader maps use. Maps are frozen to prevent TOCTOU bugs where a sufficiently privileged user could rewrite map data between the calls to BPF_PROG_LOAD and BPF_PROG_RUN. Additionally, both sparse-array-based and fd_array_cnt-based map fd arrays are supported for signature verification. Blaise Boscaccy (4): security: Hornet LSM hornet: Introduce sign-ebpf hornet: Add an example lskel data extactor script selftests/hornet: Add a selftest for the hornet LSM Documentation/admin-guide/LSM/Hornet.rst | 51 +++ crypto/asymmetric_keys/pkcs7_verify.c | 10 + include/linux/kernel_read_file.h | 1 + include/linux/verification.h | 1 + include/uapi/linux/lsm.h | 1 + scripts/Makefile | 1 + scripts/hornet/Makefile | 5 + scripts/hornet/extract-skel.sh | 29 ++ scripts/hornet/sign-ebpf.c | 420 +++++++++++++++++++ security/Kconfig | 3 +- security/Makefile | 1 + security/hornet/Kconfig | 11 + security/hornet/Makefile | 4 + security/hornet/hornet_lsm.c | 239 +++++++++++ tools/testing/selftests/Makefile | 1 + tools/testing/selftests/hornet/Makefile | 51 +++ tools/testing/selftests/hornet/loader.c | 21 + tools/testing/selftests/hornet/trivial.bpf.c | 33 ++ 18 files changed, 882 insertions(+), 1 deletion(-) create mode 100644 Documentation/admin-guide/LSM/Hornet.rst create mode 100644 scripts/hornet/Makefile create mode 100755 scripts/hornet/extract-skel.sh create mode 100644 scripts/hornet/sign-ebpf.c create mode 100644 security/hornet/Kconfig create mode 100644 security/hornet/Makefile create mode 100644 security/hornet/hornet_lsm.c create mode 100644 tools/testing/selftests/hornet/Makefile create mode 100644 tools/testing/selftests/hornet/loader.c create mode 100644 tools/testing/selftests/hornet/trivial.bpf.c -- 2.48.1

6 months, 1 week

5
22
0 0

[PATCH v3] selftests/mm: Convert page_size to unsigned long

by Siddarth G

Cppcheck warning: int result is assigned to long long variable. If the variable is long long to avoid loss of information, then you have loss of information. This patch changes the type of page_size from 'unsigned int' to 'unsigned long' instead of using ULL suffixes. Changing hpage_size to 'unsigned long' was considered, but since gethugepage() expects an int, this change was avoided. Reported-by: David Binderman <dcb314(a)hotmail.com> Closes: https://lore.kernel.org/all/AS8PR02MB10217315060BBFDB21F19643E9CA62@AS8PR02… Signed-off-by: Siddarth G <siddarthsgml(a)gmail.com> --- Changes since v2: - v2 had conflict with current mainline, so this is a fresh patch tools/testing/selftests/mm/pagemap_ioctl.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/mm/pagemap_ioctl.c b/tools/testing/selftests/mm/pagemap_ioctl.c index 57b4bba2b45f..fe5ae8b25ff6 100644 --- a/tools/testing/selftests/mm/pagemap_ioctl.c +++ b/tools/testing/selftests/mm/pagemap_ioctl.c @@ -34,7 +34,7 @@ #define PAGEMAP "/proc/self/pagemap" int pagemap_fd; int uffd; -unsigned int page_size; +unsigned long page_size; unsigned int hpage_size; const char *progname; @@ -184,7 +184,7 @@ void *gethugetlb_mem(int size, int *shmid) int userfaultfd_tests(void) { - int mem_size, vec_size, written, num_pages = 16; + long mem_size, vec_size, written, num_pages = 16; char *mem, *vec; mem_size = num_pages * page_size; @@ -213,7 +213,7 @@ int userfaultfd_tests(void) written = pagemap_ioctl(mem, mem_size, vec, 1, PM_SCAN_WP_MATCHING | PM_SCAN_CHECK_WPASYNC, vec_size - 2, PAGE_IS_WRITTEN, 0, 0, PAGE_IS_WRITTEN); if (written < 0) - ksft_exit_fail_msg("error %d %d %s\n", written, errno, strerror(errno)); + ksft_exit_fail_msg("error %ld %d %s\n", written, errno, strerror(errno)); ksft_test_result(written == 0, "%s all new pages must not be written (dirty)\n", __func__); @@ -995,7 +995,7 @@ int unmapped_region_tests(void) { void *start = (void *)0x10000000; int written, len = 0x00040000; - int vec_size = len / page_size; + long vec_size = len / page_size; struct page_region *vec = malloc(sizeof(struct page_region) * vec_size); /* 1. Get written pages */ @@ -1051,7 +1051,7 @@ static void test_simple(void) int sanity_tests(void) { unsigned long long mem_size, vec_size; - int ret, fd, i, buf_size; + long ret, fd, i, buf_size; struct page_region *vec; char *mem, *fmem; struct stat sbuf; @@ -1160,7 +1160,7 @@ int sanity_tests(void) ret = stat(progname, &sbuf); if (ret < 0) - ksft_exit_fail_msg("error %d %d %s\n", ret, errno, strerror(errno)); + ksft_exit_fail_msg("error %ld %d %s\n", ret, errno, strerror(errno)); fmem = mmap(NULL, sbuf.st_size, PROT_READ, MAP_PRIVATE, fd, 0); if (fmem == MAP_FAILED) -- 2.43.0

6 months, 1 week

1
0
0 0

[PATCH v2] ublk: improve detection and handling of ublk server exit

by Uday Shankar

There are currently two ways in which ublk server exit is detected by ublk_drv: 1. uring_cmd cancellation. If there are any outstanding uring_cmds which have not been completed to the ublk server when it exits, io_uring calls the uring_cmd callback with a special cancellation flag as the issuing task is exiting. 2. I/O timeout. This is needed in addition to the above to handle the "saturated queue" case, when all I/Os for a given queue are in the ublk server, and therefore there are no outstanding uring_cmds to cancel when the ublk server exits. There are a couple of issues with this approach: - It is complex and inelegant to have two methods to detect the same condition - The second method detects ublk server exit only after a long delay (~30s, the default timeout assigned by the block layer). This delays the nosrv behavior from kicking in and potential subsequent recovery of the device. The second issue is brought to light with the new test_generic_04. It fails before this fix: selftests: ublk: test_generic_04.sh dev id is 0 dd: error writing '/dev/ublkb0': Input/output error 1+0 records in 0+0 records out 0 bytes copied, 30.0611 s, 0.0 kB/s DEAD dd took 31 seconds to exit (>= 5s tolerance)! generic_04 : [FAIL] Fix this by instead detecting and handling ublk server exit in the character file release callback. This has several advantages: - This one place can handle both saturated and unsaturated queues. Thus, it replaces both preexisting methods of detecting ublk server exit. - It runs quickly on ublk server exit - there is no 30s delay. - It starts the process of removing task references in ublk_drv. This is needed if we want to relax restrictions in the driver like letting only one thread serve each queue There is also the disadvantage that the character file release callback can also be triggered by intentional close of the file, which is a significant behavior change. Preexisting ublk servers (libublksrv) are dependent on the ability to open/close the file multiple times. To address this, only transition to a nosrv state if the file is released while the ublk device is live. This allows for programs to open/close the file multiple times during setup. It is still a behavior change if a ublk server decides to close/reopen the file while the device is LIVE (i.e. while it is responsible for serving I/O), but that would be highly unusual. This behavior is in line with what is done by FUSE, which is very similar to ublk in that a userspace daemon is providing services traditionally provided by the kernel. With this change in, the new test (and all other selftests, and all ublksrv tests) pass: selftests: ublk: test_generic_04.sh dev id is 0 dd: error writing '/dev/ublkb0': Input/output error 1+0 records in 0+0 records out 0 bytes copied, 0.0376731 s, 0.0 kB/s DEAD generic_04 : [PASS] Signed-off-by: Uday Shankar <ushankar(a)purestorage.com> --- Changes in v2: - Leave null ublk selftests target untouched, instead create new fault_inject target for injecting per-I/O delay (Ming Lei) - Allow multiple open/close of ublk character device with some restrictions - Drop patches which made it in separately at https://lore.kernel.org/r/20250401-ublk_selftests-v1-1-98129c9bc8bb@puresto… - Consolidate more nosrv logic in ublk character device release, and associated code cleanup - Link to v1: https://lore.kernel.org/r/20250325-ublk_timeout-v1-0-262f0121a7bd@purestora… --- drivers/block/ublk_drv.c | 187 +++++++----------------- tools/testing/selftests/ublk/Makefile | 4 +- tools/testing/selftests/ublk/fault_inject.c | 58 ++++++++ tools/testing/selftests/ublk/kublk.c | 6 +- tools/testing/selftests/ublk/kublk.h | 4 + tools/testing/selftests/ublk/test_generic_04.sh | 43 ++++++ 6 files changed, 165 insertions(+), 137 deletions(-) diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c index 2fd05c1bd30b03343cb6f357f8c08dd92ff47af9..d06f8a9aa23f8b846928247fc9e29002c10a49e3 100644 --- a/drivers/block/ublk_drv.c +++ b/drivers/block/ublk_drv.c @@ -162,7 +162,6 @@ struct ublk_queue { bool force_abort; bool timeout; - bool canceling; bool fail_io; /* copy of dev->state == UBLK_S_DEV_FAIL_IO */ unsigned short nr_io_ready; /* how many ios setup */ spinlock_t cancel_lock; @@ -199,8 +198,6 @@ struct ublk_device { struct completion completion; unsigned int nr_queues_ready; unsigned int nr_privileged_daemon; - - struct work_struct nosrv_work; }; /* header of ublk_params */ @@ -209,8 +206,9 @@ struct ublk_params_header { __u32 types; }; -static bool ublk_abort_requests(struct ublk_device *ub, struct ublk_queue *ubq); - +static void ublk_stop_dev_unlocked(struct ublk_device *ub); +static void ublk_abort_queue(struct ublk_device *ub, struct ublk_queue *ubq); +static void __ublk_quiesce_dev(struct ublk_device *ub); static inline struct request *__ublk_check_and_get_req(struct ublk_device *ub, struct ublk_queue *ubq, int tag, size_t offset); static inline unsigned int ublk_req_build_flags(struct request *req); @@ -1314,8 +1312,6 @@ static void ublk_queue_cmd_list(struct ublk_queue *ubq, struct rq_list *l) static enum blk_eh_timer_return ublk_timeout(struct request *rq) { struct ublk_queue *ubq = rq->mq_hctx->driver_data; - unsigned int nr_inflight = 0; - int i; if (ubq->flags & UBLK_F_UNPRIVILEGED_DEV) { if (!ubq->timeout) { @@ -1326,26 +1322,6 @@ static enum blk_eh_timer_return ublk_timeout(struct request *rq) return BLK_EH_DONE; } - if (!ubq_daemon_is_dying(ubq)) - return BLK_EH_RESET_TIMER; - - for (i = 0; i < ubq->q_depth; i++) { - struct ublk_io *io = &ubq->ios[i]; - - if (!(io->flags & UBLK_IO_FLAG_ACTIVE)) - nr_inflight++; - } - - /* cancelable uring_cmd can't help us if all commands are in-flight */ - if (nr_inflight == ubq->q_depth) { - struct ublk_device *ub = ubq->dev; - - if (ublk_abort_requests(ub, ubq)) { - schedule_work(&ub->nosrv_work); - } - return BLK_EH_DONE; - } - return BLK_EH_RESET_TIMER; } @@ -1368,9 +1344,6 @@ static blk_status_t ublk_prep_req(struct ublk_queue *ubq, struct request *rq) if (ublk_nosrv_should_queue_io(ubq) && unlikely(ubq->force_abort)) return BLK_STS_IOERR; - if (unlikely(ubq->canceling)) - return BLK_STS_IOERR; - /* fill iod to slot in io cmd buffer */ res = ublk_setup_iod(ubq, rq); if (unlikely(res != BLK_STS_OK)) @@ -1391,16 +1364,6 @@ static blk_status_t ublk_queue_rq(struct blk_mq_hw_ctx *hctx, if (res != BLK_STS_OK) return res; - /* - * ->canceling has to be handled after ->force_abort and ->fail_io - * is dealt with, otherwise this request may not be failed in case - * of recovery, and cause hang when deleting disk - */ - if (unlikely(ubq->canceling)) { - __ublk_abort_rq(ubq, rq); - return BLK_STS_OK; - } - ublk_queue_cmd(ubq, rq); return BLK_STS_OK; } @@ -1461,8 +1424,52 @@ static int ublk_ch_open(struct inode *inode, struct file *filp) static int ublk_ch_release(struct inode *inode, struct file *filp) { struct ublk_device *ub = filp->private_data; + int i; + mutex_lock(&ub->mutex); + /* + * If the device is not live, we will not transition to a nosrv + * state. This protects against: + * - accidental poking of the ublk character device + * - some ublk servers which may open/close the ublk character + * device during startup + */ + if (ub->dev_info.state != UBLK_S_DEV_LIVE) + goto out; + + /* + * Since we are releasing the ublk character file descriptor, we + * know that there cannot be any concurrent file-related + * activity (e.g. uring_cmds or reads/writes). However, I/O + * might still be getting dispatched. Quiesce that too so that + * we don't need to worry about anything concurrent + */ + blk_mq_quiesce_queue(ub->ub_disk->queue); + + /* + * Handle any requests outstanding to the ublk server + */ + for (i = 0; i < ub->dev_info.nr_hw_queues; i++) + ublk_abort_queue(ub, ublk_get_queue(ub, i)); + + /* + * Transition the device to the nosrv state. What exactly this + * means depends on the recovery flags + */ + if (ublk_nosrv_should_stop_dev(ub)) { + ublk_stop_dev_unlocked(ub); + } else if (ublk_nosrv_dev_should_queue_io(ub)) { + __ublk_quiesce_dev(ub); + } else { + ub->dev_info.state = UBLK_S_DEV_FAIL_IO; + for (i = 0; i < ub->dev_info.nr_hw_queues; i++) + ublk_get_queue(ub, i)->fail_io = true; + } + + blk_mq_unquiesce_queue(ub->ub_disk->queue); +out: clear_bit(UB_STATE_OPEN, &ub->state); + mutex_unlock(&ub->mutex); return 0; } @@ -1556,57 +1563,6 @@ static void ublk_abort_queue(struct ublk_device *ub, struct ublk_queue *ubq) } } -/* Must be called when queue is frozen */ -static bool ublk_mark_queue_canceling(struct ublk_queue *ubq) -{ - bool canceled; - - spin_lock(&ubq->cancel_lock); - canceled = ubq->canceling; - if (!canceled) - ubq->canceling = true; - spin_unlock(&ubq->cancel_lock); - - return canceled; -} - -static bool ublk_abort_requests(struct ublk_device *ub, struct ublk_queue *ubq) -{ - bool was_canceled = ubq->canceling; - struct gendisk *disk; - - if (was_canceled) - return false; - - spin_lock(&ub->lock); - disk = ub->ub_disk; - if (disk) - get_device(disk_to_dev(disk)); - spin_unlock(&ub->lock); - - /* Our disk has been dead */ - if (!disk) - return false; - - /* - * Now we are serialized with ublk_queue_rq() - * - * Make sure that ubq->canceling is set when queue is frozen, - * because ublk_queue_rq() has to rely on this flag for avoiding to - * touch completed uring_cmd - */ - blk_mq_quiesce_queue(disk->queue); - was_canceled = ublk_mark_queue_canceling(ubq); - if (!was_canceled) { - /* abort queue is for making forward progress */ - ublk_abort_queue(ub, ubq); - } - blk_mq_unquiesce_queue(disk->queue); - put_device(disk_to_dev(disk)); - - return !was_canceled; -} - static void ublk_cancel_cmd(struct ublk_queue *ubq, struct ublk_io *io, unsigned int issue_flags) { @@ -1635,8 +1591,6 @@ static void ublk_uring_cmd_cancel_fn(struct io_uring_cmd *cmd, struct ublk_uring_cmd_pdu *pdu = ublk_get_uring_cmd_pdu(cmd); struct ublk_queue *ubq = pdu->ubq; struct task_struct *task; - struct ublk_device *ub; - bool need_schedule; struct ublk_io *io; if (WARN_ON_ONCE(!ubq)) @@ -1649,16 +1603,9 @@ static void ublk_uring_cmd_cancel_fn(struct io_uring_cmd *cmd, if (WARN_ON_ONCE(task && task != ubq->ubq_daemon)) return; - ub = ubq->dev; - need_schedule = ublk_abort_requests(ub, ubq); - io = &ubq->ios[pdu->tag]; WARN_ON_ONCE(io->cmd != cmd); ublk_cancel_cmd(ubq, io, issue_flags); - - if (need_schedule) { - schedule_work(&ub->nosrv_work); - } } static inline bool ublk_queue_ready(struct ublk_queue *ubq) @@ -1756,13 +1703,13 @@ static struct gendisk *ublk_detach_disk(struct ublk_device *ub) return disk; } -static void ublk_stop_dev(struct ublk_device *ub) +static void ublk_stop_dev_unlocked(struct ublk_device *ub) + __must_hold(&ub->mutex) { struct gendisk *disk; - mutex_lock(&ub->mutex); if (ub->dev_info.state == UBLK_S_DEV_DEAD) - goto unlock; + return; if (ublk_nosrv_dev_should_queue_io(ub)) { if (ub->dev_info.state == UBLK_S_DEV_LIVE) __ublk_quiesce_dev(ub); @@ -1771,38 +1718,12 @@ static void ublk_stop_dev(struct ublk_device *ub) del_gendisk(ub->ub_disk); disk = ublk_detach_disk(ub); put_disk(disk); - unlock: - mutex_unlock(&ub->mutex); - ublk_cancel_dev(ub); } -static void ublk_nosrv_work(struct work_struct *work) +static void ublk_stop_dev(struct ublk_device *ub) { - struct ublk_device *ub = - container_of(work, struct ublk_device, nosrv_work); - int i; - - if (ublk_nosrv_should_stop_dev(ub)) { - ublk_stop_dev(ub); - return; - } - mutex_lock(&ub->mutex); - if (ub->dev_info.state != UBLK_S_DEV_LIVE) - goto unlock; - - if (ublk_nosrv_dev_should_queue_io(ub)) { - __ublk_quiesce_dev(ub); - } else { - blk_mq_quiesce_queue(ub->ub_disk->queue); - ub->dev_info.state = UBLK_S_DEV_FAIL_IO; - for (i = 0; i < ub->dev_info.nr_hw_queues; i++) { - ublk_get_queue(ub, i)->fail_io = true; - } - blk_mq_unquiesce_queue(ub->ub_disk->queue); - } - - unlock: + ublk_stop_dev_unlocked(ub); mutex_unlock(&ub->mutex); ublk_cancel_dev(ub); } @@ -2388,7 +2309,6 @@ static void ublk_remove(struct ublk_device *ub) bool unprivileged; ublk_stop_dev(ub); - cancel_work_sync(&ub->nosrv_work); cdev_device_del(&ub->cdev, &ub->cdev_dev); unprivileged = ub->dev_info.flags & UBLK_F_UNPRIVILEGED_DEV; ublk_put_device(ub); @@ -2675,7 +2595,6 @@ static int ublk_ctrl_add_dev(struct io_uring_cmd *cmd) goto out_unlock; mutex_init(&ub->mutex); spin_lock_init(&ub->lock); - INIT_WORK(&ub->nosrv_work, ublk_nosrv_work); ret = ublk_alloc_dev_number(ub, header->dev_id); if (ret < 0) @@ -2807,7 +2726,6 @@ static inline void ublk_ctrl_cmd_dump(struct io_uring_cmd *cmd) static int ublk_ctrl_stop_dev(struct ublk_device *ub) { ublk_stop_dev(ub); - cancel_work_sync(&ub->nosrv_work); return 0; } @@ -2927,7 +2845,6 @@ static void ublk_queue_reinit(struct ublk_device *ub, struct ublk_queue *ubq) /* We have to reset it to NULL, otherwise ub won't accept new FETCH_REQ */ ubq->ubq_daemon = NULL; ubq->timeout = false; - ubq->canceling = false; for (i = 0; i < ubq->q_depth; i++) { struct ublk_io *io = &ubq->ios[i]; diff --git a/tools/testing/selftests/ublk/Makefile b/tools/testing/selftests/ublk/Makefile index c7781efea0f33c02f340f90f547d3a37c1d1b8a0..afee027cccdd1b8f13f1cb9a90a3348cd54b18bc 100644 --- a/tools/testing/selftests/ublk/Makefile +++ b/tools/testing/selftests/ublk/Makefile @@ -6,6 +6,7 @@ LDLIBS += -lpthread -lm -luring TEST_PROGS := test_generic_01.sh TEST_PROGS += test_generic_02.sh TEST_PROGS += test_generic_03.sh +TEST_PROGS += test_generic_04.sh TEST_PROGS += test_null_01.sh TEST_PROGS += test_null_02.sh @@ -26,7 +27,8 @@ TEST_GEN_PROGS_EXTENDED = kublk include ../lib.mk -$(TEST_GEN_PROGS_EXTENDED): kublk.c null.c file_backed.c common.c stripe.c +$(TEST_GEN_PROGS_EXTENDED): kublk.c null.c file_backed.c common.c stripe.c \ + fault_inject.c check: shellcheck -x -f gcc *.sh diff --git a/tools/testing/selftests/ublk/fault_inject.c b/tools/testing/selftests/ublk/fault_inject.c new file mode 100644 index 0000000000000000000000000000000000000000..e92d01e88e478a23df987ebff2a997212b831d31 --- /dev/null +++ b/tools/testing/selftests/ublk/fault_inject.c @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Fault injection ublk target. Hack this up however you like for + * testing specific behaviors of ublk_drv. Currently is a null target + * with a configurable delay before completing each I/O. This delay can + * be used to test ublk_drv's handling of I/O outstanding to the ublk + * server when it dies. + */ + +#include "kublk.h" + +static int ublk_fault_inject_tgt_init(const struct dev_ctx *ctx, struct ublk_dev *dev) +{ + const struct ublksrv_ctrl_dev_info *info = &dev->dev_info; + unsigned long dev_size = 250UL << 30; + + dev->tgt.dev_size = dev_size; + dev->tgt.params = (struct ublk_params) { + .types = UBLK_PARAM_TYPE_BASIC | UBLK_PARAM_TYPE_DMA_ALIGN | + UBLK_PARAM_TYPE_SEGMENT, + .basic = { + .logical_bs_shift = 9, + .physical_bs_shift = 12, + .io_opt_shift = 12, + .io_min_shift = 9, + .max_sectors = info->max_io_buf_bytes >> 9, + .dev_sectors = dev_size >> 9, + }, + .dma = { + .alignment = 4095, + }, + .seg = { + .seg_boundary_mask = 4095, + .max_segment_size = 32 << 10, + .max_segments = 32, + }, + }; + + dev->private_data = (void *)ctx->delay_us; + return 0; +} + +static int ublk_fault_inject_queue_io(struct ublk_queue *q, int tag) +{ + const struct ublksrv_io_desc *iod = ublk_get_iod(q, tag); + + usleep((unsigned long)q->dev->private_data); + + ublk_complete_io(q, tag, iod->nr_sectors << 9); + return 0; +} + +const struct ublk_tgt_ops fault_inject_tgt_ops = { + .name = "fault_inject", + .init_tgt = ublk_fault_inject_tgt_init, + .queue_io = ublk_fault_inject_queue_io, +}; diff --git a/tools/testing/selftests/ublk/kublk.c b/tools/testing/selftests/ublk/kublk.c index 91c282bc767449a418cce7fc816dc8e9fc732d6a..0fbfa43864453471219703451271540d5dfef593 100644 --- a/tools/testing/selftests/ublk/kublk.c +++ b/tools/testing/selftests/ublk/kublk.c @@ -10,6 +10,7 @@ static const struct ublk_tgt_ops *tgt_ops_list[] = { &null_tgt_ops, &loop_tgt_ops, &stripe_tgt_ops, + &fault_inject_tgt_ops, }; static const struct ublk_tgt_ops *ublk_find_tgt(const char *name) @@ -1041,7 +1042,7 @@ static int cmd_dev_get_features(void) static int cmd_dev_help(char *exe) { - printf("%s add -t [null|loop] [-q nr_queues] [-d depth] [-n dev_id] [backfile1] [backfile2] ...\n", exe); + printf("%s add -t [null|loop|stripe|fault_inject] [-q nr_queues] [-d depth] [-n dev_id] [backfile1] [backfile2] ...\n", exe); printf("\t default: nr_queues=2(max 4), depth=128(max 128), dev_id=-1(auto allocation)\n"); printf("%s del [-n dev_id] -a \n", exe); printf("\t -a delete all devices -n delete specified device\n"); @@ -1064,6 +1065,7 @@ int main(int argc, char *argv[]) { "zero_copy", 0, NULL, 'z' }, { "foreground", 0, NULL, 0 }, { "chunk_size", 1, NULL, 0 }, + { "delay_us", 1, NULL, 0 }, { 0, 0, 0, 0 } }; int option_idx, opt; @@ -1112,6 +1114,8 @@ int main(int argc, char *argv[]) ctx.fg = 1; if (!strcmp(longopts[option_idx].name, "chunk_size")) ctx.chunk_size = strtol(optarg, NULL, 10); + if (!strcmp(longopts[option_idx].name, "delay_us")) + ctx.delay_us = strtoul(optarg, NULL, 10); } } diff --git a/tools/testing/selftests/ublk/kublk.h b/tools/testing/selftests/ublk/kublk.h index 760ff8ffb8107037a19a8fb7ab408818845e010d..3750e67727eed89991158add49d30615ea012dae 100644 --- a/tools/testing/selftests/ublk/kublk.h +++ b/tools/testing/selftests/ublk/kublk.h @@ -70,6 +70,9 @@ struct dev_ctx { /* stripe */ unsigned int chunk_size; + /* fault_inject */ + unsigned long delay_us; + int _evtfd; }; @@ -357,6 +360,7 @@ static inline int ublk_queue_use_zc(const struct ublk_queue *q) extern const struct ublk_tgt_ops null_tgt_ops; extern const struct ublk_tgt_ops loop_tgt_ops; extern const struct ublk_tgt_ops stripe_tgt_ops; +extern const struct ublk_tgt_ops fault_inject_tgt_ops; void backing_file_tgt_deinit(struct ublk_dev *dev); int backing_file_tgt_init(struct ublk_dev *dev); diff --git a/tools/testing/selftests/ublk/test_generic_04.sh b/tools/testing/selftests/ublk/test_generic_04.sh new file mode 100755 index 0000000000000000000000000000000000000000..48af48164aa444d8ac6a58fef1743d2a16a56a14 --- /dev/null +++ b/tools/testing/selftests/ublk/test_generic_04.sh @@ -0,0 +1,43 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +. "$(cd "$(dirname "$0")" && pwd)"/test_common.sh + +TID="generic_04" +ERR_CODE=0 + +_prep_test "fault_inject" "fast cleanup when all I/Os of one hctx are in server" + +# configure ublk server to sleep 2s before completing each I/O +dev_id=$(_add_ublk_dev -t fault_inject -q 2 -d 1 --delay_us 2000000) +_check_add_dev $TID $? + +echo "dev id is ${dev_id}" + +STARTTIME=${SECONDS} + +dd if=/dev/urandom of=/dev/ublkb${dev_id} oflag=direct bs=4k count=1 & +dd_pid=$! + +__ublk_kill_daemon ${dev_id} "DEAD" + +wait $dd_pid +dd_exitcode=$? + +ENDTIME=${SECONDS} +ELAPSED=$(($ENDTIME - $STARTTIME)) + +# assert that dd sees an error and exits quickly after ublk server is +# killed. previously this relied on seeing an I/O timeout and so would +# take ~30s +if [ $dd_exitcode -eq 0 ]; then + echo "dd unexpectedly exited successfully!" + ERR_CODE=255 +fi +if [ $ELAPSED -ge 5 ]; then + echo "dd took $ELAPSED seconds to exit (>= 5s tolerance)!" + ERR_CODE=255 +fi + +_cleanup_test "fault_inject" +_show_result $TID $ERR_CODE --- base-commit: 710e2c687a16b28a873a282517a85faf02a8b7cc change-id: 20250325-ublk_timeout-b06b9b51c591 Best regards, -- Uday Shankar <ushankar(a)purestorage.com>

6 months, 2 weeks

2
1
0 0

[PATCH net v2] selftests: tc-testing: fix nat regex matching

by Pedro Tammela

In iproute 6.14, the nat ip mask logic was fixed to remove an undefined behaviour[1]. So now instead of reporting '0.0.0.0/32' on x86 and potentially '0.0.0.0/0' in other platforms, it reports '0.0.0.0/0' in all platforms. [1] https://lore.kernel.org/netdev/20250306112520.188728-1-torben.nielsen@preva… Reviewed-by: Simon Horman <horms(a)kernel.org> Signed-off-by: Pedro Tammela <pctammela(a)mojatatu.com> --- v2: Add reference to iproute2 commit and collect Simon's reviewed-by --- .../selftests/tc-testing/tc-tests/actions/nat.json | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/nat.json b/tools/testing/selftests/tc-testing/tc-tests/actions/nat.json index ee2792998c89..4f21aeb8a3fb 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/nat.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/nat.json @@ -305,7 +305,7 @@ "cmdUnderTest": "$TC actions add action nat ingress default 10.10.10.1 index 12", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 12", - "matchPattern": "action order [0-9]+: nat ingress 0.0.0.0/32 10.10.10.1 pass.*index 12 ref", + "matchPattern": "action order [0-9]+: nat ingress 0.0.0.0/0 10.10.10.1 pass.*index 12 ref", "matchCount": "1", "teardown": [ "$TC actions flush action nat" @@ -332,7 +332,7 @@ "cmdUnderTest": "$TC actions add action nat ingress any 10.10.10.1 index 12", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 12", - "matchPattern": "action order [0-9]+: nat ingress 0.0.0.0/32 10.10.10.1 pass.*index 12 ref", + "matchPattern": "action order [0-9]+: nat ingress 0.0.0.0/0 10.10.10.1 pass.*index 12 ref", "matchCount": "1", "teardown": [ "$TC actions flush action nat" @@ -359,7 +359,7 @@ "cmdUnderTest": "$TC actions add action nat ingress all 10.10.10.1 index 12", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 12", - "matchPattern": "action order [0-9]+: nat ingress 0.0.0.0/32 10.10.10.1 pass.*index 12 ref", + "matchPattern": "action order [0-9]+: nat ingress 0.0.0.0/0 10.10.10.1 pass.*index 12 ref", "matchCount": "1", "teardown": [ "$TC actions flush action nat" @@ -548,7 +548,7 @@ "cmdUnderTest": "$TC actions add action nat egress default 20.20.20.1 pipe index 10", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 10", - "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/32 20.20.20.1 pipe.*index 10 ref", + "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/0 20.20.20.1 pipe.*index 10 ref", "matchCount": "1", "teardown": [ "$TC actions flush action nat" @@ -575,7 +575,7 @@ "cmdUnderTest": "$TC actions add action nat egress any 20.20.20.1 pipe index 10", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 10", - "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/32 20.20.20.1 pipe.*index 10 ref", + "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/0 20.20.20.1 pipe.*index 10 ref", "matchCount": "1", "teardown": [ "$TC actions flush action nat" @@ -602,7 +602,7 @@ "cmdUnderTest": "$TC actions add action nat egress all 20.20.20.1 pipe index 10", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 10", - "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/32 20.20.20.1 pipe.*index 10 ref", + "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/0 20.20.20.1 pipe.*index 10 ref", "matchCount": "1", "teardown": [ "$TC actions flush action nat" @@ -629,7 +629,7 @@ "cmdUnderTest": "$TC actions add action nat egress all 20.20.20.1 pipe index 10 cookie aa1bc2d3eeff112233445566778800a1", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 10", - "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/32 20.20.20.1 pipe.*index 10 ref.*cookie aa1bc2d3eeff112233445566778800a1", + "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/0 20.20.20.1 pipe.*index 10 ref.*cookie aa1bc2d3eeff112233445566778800a1", "matchCount": "1", "teardown": [ "$TC actions flush action nat" -- 2.43.0

6 months, 2 weeks

2
1
0 0

[PATCH net-next v24 00/23] Introducing OpenVPN Data Channel Offload

by Antonio Quartulli

Notable changes since v23: * dropped call to netif_tx_start/stop_all_queues() * dropped NETIF_F_HW_CSUM and NETIF_F_RXCSUM dev flags * dropped conditional call to skb_checksum_help() due to the point above * added call to dst_cache_reset() in nl_peer_modify() * dropped obsolete comment in ovpn_peer_keepalive_work() * reversed scheduling delay computation in ovpn_peer_keepalive_work() Please note that some patches were already reviewed/tested by a few people. These patches have retained the tags as they have hardly been touched. The latest code can also be found at: https://github.com/OpenVPN/ovpn-net-next Thanks a lot! Best Regards, Antonio Quartulli OpenVPN Inc. --- Antonio Quartulli (23): net: introduce OpenVPN Data Channel Offload (ovpn) ovpn: add basic netlink support ovpn: add basic interface creation/destruction/management routines ovpn: keep carrier always on for MP interfaces ovpn: introduce the ovpn_peer object ovpn: introduce the ovpn_socket object ovpn: implement basic TX path (UDP) ovpn: implement basic RX path (UDP) ovpn: implement packet processing ovpn: store tunnel and transport statistics ovpn: implement TCP transport skb: implement skb_send_sock_locked_with_flags() ovpn: add support for MSG_NOSIGNAL in tcp_sendmsg ovpn: implement multi-peer support ovpn: implement peer lookup logic ovpn: implement keepalive mechanism ovpn: add support for updating local or remote UDP endpoint ovpn: implement peer add/get/dump/delete via netlink ovpn: implement key add/get/del/swap via netlink ovpn: kill key and notify userspace in case of IV exhaustion ovpn: notify userspace when a peer is deleted ovpn: add basic ethtool support testing/selftests: add test tool and scripts for ovpn module Documentation/netlink/specs/ovpn.yaml | 367 +++ Documentation/netlink/specs/rt_link.yaml | 16 + MAINTAINERS | 11 + drivers/net/Kconfig | 15 + drivers/net/Makefile | 1 + drivers/net/ovpn/Makefile | 22 + drivers/net/ovpn/bind.c | 55 + drivers/net/ovpn/bind.h | 101 + drivers/net/ovpn/crypto.c | 211 ++ drivers/net/ovpn/crypto.h | 145 ++ drivers/net/ovpn/crypto_aead.c | 409 ++++ drivers/net/ovpn/crypto_aead.h | 29 + drivers/net/ovpn/io.c | 455 ++++ drivers/net/ovpn/io.h | 34 + drivers/net/ovpn/main.c | 330 +++ drivers/net/ovpn/main.h | 14 + drivers/net/ovpn/netlink-gen.c | 213 ++ drivers/net/ovpn/netlink-gen.h | 41 + drivers/net/ovpn/netlink.c | 1250 ++++++++++ drivers/net/ovpn/netlink.h | 18 + drivers/net/ovpn/ovpnpriv.h | 57 + drivers/net/ovpn/peer.c | 1364 +++++++++++ drivers/net/ovpn/peer.h | 163 ++ drivers/net/ovpn/pktid.c | 129 ++ drivers/net/ovpn/pktid.h | 87 + drivers/net/ovpn/proto.h | 118 + drivers/net/ovpn/skb.h | 61 + drivers/net/ovpn/socket.c | 244 ++ drivers/net/ovpn/socket.h | 49 + drivers/net/ovpn/stats.c | 21 + drivers/net/ovpn/stats.h | 47 + drivers/net/ovpn/tcp.c | 592 +++++ drivers/net/ovpn/tcp.h | 36 + drivers/net/ovpn/udp.c | 442 ++++ drivers/net/ovpn/udp.h | 25 + include/linux/skbuff.h | 2 + include/uapi/linux/if_link.h | 15 + include/uapi/linux/ovpn.h | 109 + include/uapi/linux/udp.h | 1 + net/core/skbuff.c | 18 +- net/ipv6/af_inet6.c | 1 + net/ipv6/udp.c | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/net/ovpn/.gitignore | 2 + tools/testing/selftests/net/ovpn/Makefile | 31 + tools/testing/selftests/net/ovpn/common.sh | 92 + tools/testing/selftests/net/ovpn/config | 10 + tools/testing/selftests/net/ovpn/data64.key | 5 + tools/testing/selftests/net/ovpn/ovpn-cli.c | 2395 ++++++++++++++++++++ tools/testing/selftests/net/ovpn/tcp_peers.txt | 5 + .../testing/selftests/net/ovpn/test-chachapoly.sh | 9 + .../selftests/net/ovpn/test-close-socket-tcp.sh | 9 + .../selftests/net/ovpn/test-close-socket.sh | 45 + tools/testing/selftests/net/ovpn/test-float.sh | 9 + tools/testing/selftests/net/ovpn/test-tcp.sh | 9 + tools/testing/selftests/net/ovpn/test.sh | 113 + tools/testing/selftests/net/ovpn/udp_peers.txt | 5 + 57 files changed, 10054 insertions(+), 5 deletions(-) --- base-commit: 702e3fa16cd42ba712825e8d6171ea4755bc0491 change-id: 20241002-b4-ovpn-eeee35c694a2 Best regards, -- Antonio Quartulli <antonio(a)openvpn.net>

6 months, 2 weeks

3
50
0 0

RE: ISC West 2025 Attendee Data to Drive Sales and Networking Efforts

by Sara Wood

Hi , I wanted to confirm if you got my last email. I can provide more information on the numbers and costs-just say the word! Regards Sara Wood Demand Generation Manager Leads Data Inc., Please reply with REMOVE if you don't wish to receive further emails -----Original Message----- From: Sara Wood To: Subject: ISC West 2025 Attendee Data to Drive Sales and Networking Efforts Hi , Are you considering getting the ICS West 2025 attendees list? Expo Name: International Security Conference & Exposition West 2025 Total Number of records: 23,000 records List includes: Company Name, Contact Name, Job Title, Mailing Address, Phone, Emails, etc. Do you want to acquire these leads? If so, I'm happy to send the pricing details. Eager for your response Regards Sara Wood Demand Generation Manager Leads Data Inc., Please reply with REMOVE if you don't wish to receive further emails

6 months, 2 weeks

1
0
0 0

[PATCH 0/2] ublk: fixes for selftests

by Uday Shankar

Fix a couple of issues I saw when developing selftests for ublk. These patches are split out from the following series: https://lore.kernel.org/linux-block/20250325-ublk_timeout-v1-0-262f0121a7bd… Signed-off-by: Uday Shankar <ushankar(a)purestorage.com> --- Uday Shankar (2): selftests: ublk: kublk: use ioctl-encoded opcodes selftests: ublk: kublk: fix an error log line tools/testing/selftests/ublk/kublk.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- base-commit: 4cfcc398357b0fb3d4c97d47d4a9e3c0653b7903 change-id: 20250325-ublk_selftests-6a055dfbc55b Best regards, -- Uday Shankar <ushankar(a)purestorage.com>

6 months, 2 weeks

2
5
0 0

[PATCH 0/4] ublk: improve handling of saturated queues when ublk server exits

by Uday Shankar

This set aims to reduce the long delay in applications reacting to ublk server exit in the case of a "fully saturated" queue, i.e. one for which all I/Os are outstanding to the ublk server. The first few patches fix some minor issues in the ublk selftests, and the last patch contains the main work and a test to validate it. Signed-off-by: Uday Shankar <ushankar(a)purestorage.com> --- Uday Shankar (4): selftests: ublk: kublk: use ioctl-encoded opcodes selftests: ublk: kublk: fix an error log line selftests: ublk: kublk: ignore SIGCHLD ublk: improve handling of saturated queues when ublk server exits drivers/block/ublk_drv.c | 40 +++++++++++------------ tools/testing/selftests/ublk/Makefile | 1 + tools/testing/selftests/ublk/kublk.c | 10 ++++-- tools/testing/selftests/ublk/kublk.h | 3 ++ tools/testing/selftests/ublk/null.c | 4 +++ tools/testing/selftests/ublk/test_generic_02.sh | 43 +++++++++++++++++++++++++ 6 files changed, 76 insertions(+), 25 deletions(-) --- base-commit: 648154b1c78c9e00b6934082cae48bb38714de20 change-id: 20250325-ublk_timeout-b06b9b51c591 Best regards, -- Uday Shankar <ushankar(a)purestorage.com>

6 months, 2 weeks

2
19
0 0

[PATCH net] selftests: tc-testing: fix nat regex matching

by Pedro Tammela

In iproute 6.14, the nat ip mask logic was fixed to remove a undefined behaviour. So now instead of reporting '0.0.0.0/32' on x86 and potentially '0.0.0.0/0' in other platforms, it reports '0.0.0.0/0' in all platforms. Signed-off-by: Pedro Tammela <pctammela(a)mojatatu.com> --- .../selftests/tc-testing/tc-tests/actions/nat.json | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/nat.json b/tools/testing/selftests/tc-testing/tc-tests/actions/nat.json index ee2792998c89..4f21aeb8a3fb 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/nat.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/nat.json @@ -305,7 +305,7 @@ "cmdUnderTest": "$TC actions add action nat ingress default 10.10.10.1 index 12", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 12", - "matchPattern": "action order [0-9]+: nat ingress 0.0.0.0/32 10.10.10.1 pass.*index 12 ref", + "matchPattern": "action order [0-9]+: nat ingress 0.0.0.0/0 10.10.10.1 pass.*index 12 ref", "matchCount": "1", "teardown": [ "$TC actions flush action nat" @@ -332,7 +332,7 @@ "cmdUnderTest": "$TC actions add action nat ingress any 10.10.10.1 index 12", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 12", - "matchPattern": "action order [0-9]+: nat ingress 0.0.0.0/32 10.10.10.1 pass.*index 12 ref", + "matchPattern": "action order [0-9]+: nat ingress 0.0.0.0/0 10.10.10.1 pass.*index 12 ref", "matchCount": "1", "teardown": [ "$TC actions flush action nat" @@ -359,7 +359,7 @@ "cmdUnderTest": "$TC actions add action nat ingress all 10.10.10.1 index 12", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 12", - "matchPattern": "action order [0-9]+: nat ingress 0.0.0.0/32 10.10.10.1 pass.*index 12 ref", + "matchPattern": "action order [0-9]+: nat ingress 0.0.0.0/0 10.10.10.1 pass.*index 12 ref", "matchCount": "1", "teardown": [ "$TC actions flush action nat" @@ -548,7 +548,7 @@ "cmdUnderTest": "$TC actions add action nat egress default 20.20.20.1 pipe index 10", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 10", - "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/32 20.20.20.1 pipe.*index 10 ref", + "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/0 20.20.20.1 pipe.*index 10 ref", "matchCount": "1", "teardown": [ "$TC actions flush action nat" @@ -575,7 +575,7 @@ "cmdUnderTest": "$TC actions add action nat egress any 20.20.20.1 pipe index 10", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 10", - "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/32 20.20.20.1 pipe.*index 10 ref", + "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/0 20.20.20.1 pipe.*index 10 ref", "matchCount": "1", "teardown": [ "$TC actions flush action nat" @@ -602,7 +602,7 @@ "cmdUnderTest": "$TC actions add action nat egress all 20.20.20.1 pipe index 10", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 10", - "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/32 20.20.20.1 pipe.*index 10 ref", + "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/0 20.20.20.1 pipe.*index 10 ref", "matchCount": "1", "teardown": [ "$TC actions flush action nat" @@ -629,7 +629,7 @@ "cmdUnderTest": "$TC actions add action nat egress all 20.20.20.1 pipe index 10 cookie aa1bc2d3eeff112233445566778800a1", "expExitCode": "0", "verifyCmd": "$TC actions get action nat index 10", - "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/32 20.20.20.1 pipe.*index 10 ref.*cookie aa1bc2d3eeff112233445566778800a1", + "matchPattern": "action order [0-9]+: nat egress 0.0.0.0/0 20.20.20.1 pipe.*index 10 ref.*cookie aa1bc2d3eeff112233445566778800a1", "matchCount": "1", "teardown": [ "$TC actions flush action nat" -- 2.43.0

6 months, 2 weeks

2
2
0 0

[RFC PATCH] rtc: remove 'setdate' test program

by Wolfram Sang

The tool is not embedded in the testing framework. 'rtc' from rtc-tools serves as a much better programming example. No need to carry this tool in the kernel tree. Signed-off-by: Wolfram Sang <wsa+renesas(a)sang-engineering.com> --- Alexandre, what is you opinion on this? tools/testing/selftests/rtc/.gitignore | 1 - tools/testing/selftests/rtc/Makefile | 2 - tools/testing/selftests/rtc/setdate.c | 77 -------------------------- 3 files changed, 80 deletions(-) delete mode 100644 tools/testing/selftests/rtc/setdate.c diff --git a/tools/testing/selftests/rtc/.gitignore b/tools/testing/selftests/rtc/.gitignore index fb2d533aa575..a2afe7994e85 100644 --- a/tools/testing/selftests/rtc/.gitignore +++ b/tools/testing/selftests/rtc/.gitignore @@ -1,3 +1,2 @@ # SPDX-License-Identifier: GPL-2.0-only rtctest -setdate diff --git a/tools/testing/selftests/rtc/Makefile b/tools/testing/selftests/rtc/Makefile index 9dbb395c5c79..547c244a2ca5 100644 --- a/tools/testing/selftests/rtc/Makefile +++ b/tools/testing/selftests/rtc/Makefile @@ -4,8 +4,6 @@ LDLIBS += -lrt -lpthread -lm TEST_GEN_PROGS = rtctest -TEST_GEN_PROGS_EXTENDED = setdate - TEST_FILES := settings include ../lib.mk diff --git a/tools/testing/selftests/rtc/setdate.c b/tools/testing/selftests/rtc/setdate.c deleted file mode 100644 index b303890b3de2..000000000000 --- a/tools/testing/selftests/rtc/setdate.c +++ /dev/null @@ -1,77 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* Real Time Clock Driver Test - * by: Benjamin Gaignard (benjamin.gaignard(a)linaro.org) - * - * To build - * gcc rtctest_setdate.c -o rtctest_setdate - */ - -#include <stdio.h> -#include <linux/rtc.h> -#include <sys/ioctl.h> -#include <sys/time.h> -#include <sys/types.h> -#include <fcntl.h> -#include <unistd.h> -#include <stdlib.h> -#include <errno.h> - -static const char default_time[] = "00:00:00"; - -int main(int argc, char **argv) -{ - int fd, retval; - struct rtc_time new, current; - const char *rtc, *date; - const char *time = default_time; - - switch (argc) { - case 4: - time = argv[3]; - /* FALLTHROUGH */ - case 3: - date = argv[2]; - rtc = argv[1]; - break; - default: - fprintf(stderr, "usage: rtctest_setdate <rtcdev> <DD-MM-YYYY> [HH:MM:SS]\n"); - return 1; - } - - fd = open(rtc, O_RDONLY); - if (fd == -1) { - perror(rtc); - exit(errno); - } - - sscanf(date, "%d-%d-%d", &new.tm_mday, &new.tm_mon, &new.tm_year); - new.tm_mon -= 1; - new.tm_year -= 1900; - sscanf(time, "%d:%d:%d", &new.tm_hour, &new.tm_min, &new.tm_sec); - - fprintf(stderr, "Test will set RTC date/time to %d-%d-%d, %02d:%02d:%02d.\n", - new.tm_mday, new.tm_mon + 1, new.tm_year + 1900, - new.tm_hour, new.tm_min, new.tm_sec); - - /* Write the new date in RTC */ - retval = ioctl(fd, RTC_SET_TIME, &new); - if (retval == -1) { - perror("RTC_SET_TIME ioctl"); - close(fd); - exit(errno); - } - - /* Read back */ - retval = ioctl(fd, RTC_RD_TIME, &current); - if (retval == -1) { - perror("RTC_RD_TIME ioctl"); - exit(errno); - } - - fprintf(stderr, "\n\nCurrent RTC date/time is %d-%d-%d, %02d:%02d:%02d.\n", - current.tm_mday, current.tm_mon + 1, current.tm_year + 1900, - current.tm_hour, current.tm_min, current.tm_sec); - - close(fd); - return 0; -} -- 2.47.2

6 months, 2 weeks

3
5
0 0

[PATCH] selftest: rtc: skip some tests if the alarm only supports minutes

by Wolfram Sang

There are alarms which have only minute-granularity. The RTC core already has a flag to describe them. Use this flag to skip tests which require the alarm to support seconds. Signed-off-by: Wolfram Sang <wsa+renesas(a)sang-engineering.com> --- Tested with a Renesas RZ-N1D board. This RTC obviously has only minute resolution for the alarms. Output now looks like this: # RUN rtc.alarm_alm_set ... # SKIP Skipping test since alarms has only minute granularity. # OK rtc.alarm_alm_set ok 5 rtc.alarm_alm_set # SKIP Skipping test since alarms has only minute granularity. Before it was like this: # RUN rtc.alarm_alm_set ... # rtctest.c:255:alarm_alm_set:Alarm time now set to 09:40:00. # rtctest.c:275:alarm_alm_set:data: 1a0 # rtctest.c:281:alarm_alm_set:Expected new (1489743644) == secs (1489743647) tools/testing/selftests/rtc/rtctest.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/rtc/rtctest.c b/tools/testing/selftests/rtc/rtctest.c index 3e4f0d5c5329..e0a148261e6f 100644 --- a/tools/testing/selftests/rtc/rtctest.c +++ b/tools/testing/selftests/rtc/rtctest.c @@ -29,6 +29,7 @@ enum rtc_alarm_state { RTC_ALARM_UNKNOWN, RTC_ALARM_ENABLED, RTC_ALARM_DISABLED, + RTC_ALARM_RES_MINUTE, }; FIXTURE(rtc) { @@ -88,7 +89,7 @@ static void nanosleep_with_retries(long ns) } } -static enum rtc_alarm_state get_rtc_alarm_state(int fd) +static enum rtc_alarm_state get_rtc_alarm_state(int fd, int need_seconds) { struct rtc_param param = { 0 }; int rc; @@ -103,6 +104,10 @@ static enum rtc_alarm_state get_rtc_alarm_state(int fd) if ((param.uvalue & _BITUL(RTC_FEATURE_ALARM)) == 0) return RTC_ALARM_DISABLED; + /* Check if alarm has desired granularity */ + if (need_seconds && (param.uvalue & _BITUL(RTC_FEATURE_ALARM_RES_MINUTE))) + return RTC_ALARM_RES_MINUTE; + return RTC_ALARM_ENABLED; } @@ -227,9 +232,11 @@ TEST_F(rtc, alarm_alm_set) { SKIP(return, "Skipping test since %s does not exist", rtc_file); ASSERT_NE(-1, self->fd); - alarm_state = get_rtc_alarm_state(self->fd); + alarm_state = get_rtc_alarm_state(self->fd, 1); if (alarm_state == RTC_ALARM_DISABLED) SKIP(return, "Skipping test since alarms are not supported."); + if (alarm_state == RTC_ALARM_RES_MINUTE) + SKIP(return, "Skipping test since alarms has only minute granularity."); rc = ioctl(self->fd, RTC_RD_TIME, &tm); ASSERT_NE(-1, rc); @@ -295,9 +302,11 @@ TEST_F(rtc, alarm_wkalm_set) { SKIP(return, "Skipping test since %s does not exist", rtc_file); ASSERT_NE(-1, self->fd); - alarm_state = get_rtc_alarm_state(self->fd); + alarm_state = get_rtc_alarm_state(self->fd, 1); if (alarm_state == RTC_ALARM_DISABLED) SKIP(return, "Skipping test since alarms are not supported."); + if (alarm_state == RTC_ALARM_RES_MINUTE) + SKIP(return, "Skipping test since alarms has only minute granularity."); rc = ioctl(self->fd, RTC_RD_TIME, &alarm.time); ASSERT_NE(-1, rc); @@ -357,7 +366,7 @@ TEST_F_TIMEOUT(rtc, alarm_alm_set_minute, 65) { SKIP(return, "Skipping test since %s does not exist", rtc_file); ASSERT_NE(-1, self->fd); - alarm_state = get_rtc_alarm_state(self->fd); + alarm_state = get_rtc_alarm_state(self->fd, 0); if (alarm_state == RTC_ALARM_DISABLED) SKIP(return, "Skipping test since alarms are not supported."); @@ -425,7 +434,7 @@ TEST_F_TIMEOUT(rtc, alarm_wkalm_set_minute, 65) { SKIP(return, "Skipping test since %s does not exist", rtc_file); ASSERT_NE(-1, self->fd); - alarm_state = get_rtc_alarm_state(self->fd); + alarm_state = get_rtc_alarm_state(self->fd, 0); if (alarm_state == RTC_ALARM_DISABLED) SKIP(return, "Skipping test since alarms are not supported."); -- 2.39.2

6 months, 2 weeks

2
1
0 0

[PATCH] selftest: rtc: skip alarm test if RTC is minute resolution

by Weizhao Ouyang

Skip second resolution alarm test if RTC is minute resolution. Signed-off-by: Weizhao Ouyang <o451686892(a)gmail.com> --- tools/testing/selftests/rtc/rtctest.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/tools/testing/selftests/rtc/rtctest.c b/tools/testing/selftests/rtc/rtctest.c index e103097d0b5b..b8d196f1c5f6 100644 --- a/tools/testing/selftests/rtc/rtctest.c +++ b/tools/testing/selftests/rtc/rtctest.c @@ -28,6 +28,7 @@ static char *rtc_file = "/dev/rtc0"; enum rtc_alarm_state { RTC_ALARM_UNKNOWN, RTC_ALARM_ENABLED, + RTC_ALARM_MINUTE, RTC_ALARM_DISABLED, }; @@ -100,6 +101,9 @@ static enum rtc_alarm_state get_rtc_alarm_state(int fd) if (rc < 0) return RTC_ALARM_UNKNOWN; + if (param.uvalue & _BITUL(RTC_FEATURE_ALARM_RES_MINUTE)) + return RTC_ALARM_MINUTE; + if ((param.uvalue & _BITUL(RTC_FEATURE_ALARM)) == 0) return RTC_ALARM_DISABLED; @@ -230,6 +234,8 @@ TEST_F(rtc, alarm_alm_set) { alarm_state = get_rtc_alarm_state(self->fd); if (alarm_state == RTC_ALARM_DISABLED) SKIP(return, "Skipping test since alarms are not supported."); + if (alarm_state == RTC_ALARM_MINUTE) + SKIP(return, "Skipping test since alarms have minute resolution."); rc = ioctl(self->fd, RTC_RD_TIME, &tm); ASSERT_NE(-1, rc); @@ -298,6 +304,8 @@ TEST_F(rtc, alarm_wkalm_set) { alarm_state = get_rtc_alarm_state(self->fd); if (alarm_state == RTC_ALARM_DISABLED) SKIP(return, "Skipping test since alarms are not supported."); + if (alarm_state == RTC_ALARM_MINUTE) + SKIP(return, "Skipping test since alarms have minute resolution."); rc = ioctl(self->fd, RTC_RD_TIME, &alarm.time); ASSERT_NE(-1, rc); -- 2.45.2

6 months, 2 weeks

1
0
0 0

[PATCH 0/3] selftests: coredump: Some bug fixes

by Nam Cao

Hi, While trying the coredump test on qemu-system-riscv64, I observed test failures for various reasons. This series makes the test works on qemu-system-riscv64. Best regards, Nam Nam Cao (3): selftests: coredump: Properly initialize pointer selftests: coredump: Use waitpid() instead of busy-wait selftests: coredump: Raise timeout to 2 minutes tools/testing/selftests/coredump/stackdump | 6 +----- .../testing/selftests/coredump/stackdump_test.c | 17 +++++++++-------- 2 files changed, 10 insertions(+), 13 deletions(-) -- 2.39.5

6 months, 2 weeks

2
5
0 0

[PATCH] unshare_test: set nr_open using soft limit

by lufei

Set maximum file descriptor number limit by rlimit.rlim_max than nr_open(hard limit). Hard limit may cause dup2 fail. Signed-off-by: lufei <lufei(a)uniontech.com> --- tools/testing/selftests/core/unshare_test.c | 28 +++++++++++++-------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/core/unshare_test.c b/tools/testing/selftests/core/unshare_test.c index 7fec9dfb1b0e..2c4e7104b0d9 100644 --- a/tools/testing/selftests/core/unshare_test.c +++ b/tools/testing/selftests/core/unshare_test.c @@ -26,10 +26,11 @@ TEST(unshare_EMFILE) .exit_signal = SIGCHLD, }; int fd; - ssize_t n, n2; - static char buf[512], buf2[512]; + ssize_t n, n2, n3; + static char buf[512], buf2[512], buf3[512]; struct rlimit rlimit; int nr_open; + int rlimit_max; fd = open("/proc/sys/fs/nr_open", O_RDWR); ASSERT_GE(fd, 0); @@ -42,22 +43,24 @@ TEST(unshare_EMFILE) ASSERT_EQ(0, getrlimit(RLIMIT_NOFILE, &rlimit)); - /* bump fs.nr_open */ - n2 = sprintf(buf2, "%d\n", nr_open + 1024); + rlimit_max = rlimit.rlim_max; + + /* bump rlimit.rlim_max */ + n2 = sprintf(buf2, "%d\n", rlimit_max + 1024); lseek(fd, 0, SEEK_SET); write(fd, buf2, n2); /* bump ulimit -n */ - rlimit.rlim_cur = nr_open + 1024; - rlimit.rlim_max = nr_open + 1024; + rlimit.rlim_cur = rlimit_max + 1024; + rlimit.rlim_max = rlimit_max + 1024; EXPECT_EQ(0, setrlimit(RLIMIT_NOFILE, &rlimit)) { lseek(fd, 0, SEEK_SET); write(fd, buf, n); exit(EXIT_FAILURE); } - /* get a descriptor past the old fs.nr_open */ - EXPECT_GE(dup2(2, nr_open + 64), 0) { + /* get a descriptor past the old rlimit.rlim_max */ + EXPECT_GE(dup2(2, rlimit_max + 64), 0) { lseek(fd, 0, SEEK_SET); write(fd, buf, n); exit(EXIT_FAILURE); @@ -74,15 +77,20 @@ TEST(unshare_EMFILE) if (pid == 0) { int err; - /* restore fs.nr_open */ + n3 = sprintf(buf3, "%d\n", rlimit_max); lseek(fd, 0, SEEK_SET); - write(fd, buf, n); + write(fd, buf3, n3); + /* ... and now unshare(CLONE_FILES) must fail with EMFILE */ err = unshare(CLONE_FILES); EXPECT_EQ(err, -1) exit(EXIT_FAILURE); EXPECT_EQ(errno, EMFILE) exit(EXIT_FAILURE); + + /* restore fs.nr_open */ + lseek(fd, 0, SEEK_SET); + write(fd, buf, n); exit(EXIT_SUCCESS); } -- 2.39.3

6 months, 2 weeks

3
2
0 0

[PATCH net 0/4] mptcp: misc. fixes for 6.15-rc0

by Matthieu Baerts (NGI0)

Here are 4 unrelated patches: - Patch 1: fix a NULL pointer when two SYN-ACK for the same request are handled in parallel. A fix for up to v5.9. - Patch 2: selftests: fix check for the wrong FD. A fix for up to v5.17. - Patch 3: selftests: close all FDs in case of error. A fix for up to v5.17. - Patch 4: selftests: ignore a new generated file. A fix for 6.15-rc0. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Cong Liu (1): selftests: mptcp: fix incorrect fd checks in main_loop Gang Yan (1): mptcp: fix NULL pointer in can_accept_new_subflow Geliang Tang (1): selftests: mptcp: close fd_in before returning in main_loop Matthieu Baerts (NGI0) (1): selftests: mptcp: ignore mptcp_diag binary net/mptcp/subflow.c | 15 ++++++++------- tools/testing/selftests/net/mptcp/.gitignore | 1 + tools/testing/selftests/net/mptcp/mptcp_connect.c | 11 +++++++---- 3 files changed, 16 insertions(+), 11 deletions(-) --- base-commit: 2ea396448f26d0d7d66224cb56500a6789c7ed07 change-id: 20250328-net-mptcp-misc-fixes-6-15-98bfbeaa15ac Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

6 months, 2 weeks

2
5
0 0

[PATCH] kunit: fixes Compilation error on s390

by Alessandro Carminati

The current implementation of suppressing warning backtraces uses __func__, which is a compile-time constant only for non -fPIC compilation. GCC's support for this situation in position-independent code varies across versions and architectures. On the s390 architecture, -fPIC is required for compilation, and support for this scenario is available in GCC 11 and later. Fixes: d8b14a2 ("bug/kunit: core support for suppressing warning backtraces") Signed-off-by: Alessandro Carminati <acarmina(a)redhat.com> --- lib/kunit/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/lib/kunit/Kconfig b/lib/kunit/Kconfig index 201402f0ab49..6c937144dcea 100644 --- a/lib/kunit/Kconfig +++ b/lib/kunit/Kconfig @@ -17,6 +17,7 @@ if KUNIT config KUNIT_SUPPRESS_BACKTRACE bool "KUnit - Enable backtrace suppression" + depends on (!S390 && CC_IS_GCC) || (CC_IS_GCC && GCC_VERSION >= 110000) default y help Enable backtrace suppression for KUnit. If enabled, backtraces -- 2.34.1

6 months, 2 weeks

4
3
0 0

[PATCH] kunit: fixes backtrace suppression test module description

by Alessandro Carminati

Adds module description to the backtrace suppression test Fixes: ("19f3496") kunit: add test cases for backtrace warning suppression Signed-off-by: Alessandro Carminati <acarmina(a)redhat.com> --- lib/kunit/backtrace-suppression-test.c | 1 + 1 file changed, 1 insertion(+) diff --git a/lib/kunit/backtrace-suppression-test.c b/lib/kunit/backtrace-suppression-test.c index 8b4125af2481..d4c5df09bba6 100644 --- a/lib/kunit/backtrace-suppression-test.c +++ b/lib/kunit/backtrace-suppression-test.c @@ -102,3 +102,4 @@ static struct kunit_suite backtrace_suppression_test_suite = { kunit_test_suites(&backtrace_suppression_test_suite); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("KUnit test to verify warning backtrace suppression"); -- 2.34.1

6 months, 2 weeks

3
2
0 0

[PATCH v2 0/4] tools/nolibc: MIPS: entrypoint cleanups and N32/N64 ABIs

by Thomas Weißschuh

Introduce support for the N32 and N64 ABIs. As preparation, the entrypoint is first simplified significantly. Thanks to Maciej for all the valuable information. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Changes in v2: - Clean up entrypoint first - Annotate #endifs - Link to v1: https://lore.kernel.org/r/20250212-nolibc-mips-n32-v1-1-6892e58d1321@weisss… --- Thomas Weißschuh (4): tools/nolibc: MIPS: drop $gp setup tools/nolibc: MIPS: drop manual stack pointer alignment tools/nolibc: MIPS: drop noreorder option tools/nolibc: MIPS: add support for N64 and N32 ABIs tools/include/nolibc/arch-mips.h | 117 +++++++++++++++++++++------- tools/testing/selftests/nolibc/Makefile | 28 ++++++- tools/testing/selftests/nolibc/run-tests.sh | 2 +- 3 files changed, 118 insertions(+), 29 deletions(-) --- base-commit: 9c812b01f13d37410ea103e00bc47e5e0f6d2bad change-id: 20231105-nolibc-mips-n32-234901bd910d Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

6 months, 2 weeks

4
13
0 0

[PATCH v2] selftests/mm: Convert page_size to unsigned long

by Siddarth G

Cppcheck warning: int result is assigned to long long variable. If the variable is long long to avoid loss of information, then you have loss of information. This patch changes the type of page_size from 'unsigned int' to 'unsigned long' instead of using ULL suffixes. Changing hpage_size to 'unsigned long' was considered, but since gethugepage() expects an int, this change was avoided. Similarly, wp_init(), wp_free(), wp_addr_range() are designed to accept int parameters, even though they are assigned with long values. Future updates to these functions might be required ? Reported-by: David Binderman <dcb314(a)hotmail.com> Closes: https://lore.kernel.org/all/AS8PR02MB10217315060BBFDB21F19643E9CA62@AS8PR02… Signed-off-by: Siddarth G <siddarthsgml(a)gmail.com> --- Changes since v1: - Instead of using ULL suffixes, converted page_size and related variables involving it from 'int' to 'long' tools/testing/selftests/mm/pagemap_ioctl.c | 24 +++++++++++----------- 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/tools/testing/selftests/mm/pagemap_ioctl.c b/tools/testing/selftests/mm/pagemap_ioctl.c index f3b12402ca89..fe5ae8b25ff6 100644 --- a/tools/testing/selftests/mm/pagemap_ioctl.c +++ b/tools/testing/selftests/mm/pagemap_ioctl.c @@ -34,7 +34,7 @@ #define PAGEMAP "/proc/self/pagemap" int pagemap_fd; int uffd; -unsigned int page_size; +unsigned long page_size; unsigned int hpage_size; const char *progname; @@ -184,7 +184,7 @@ void *gethugetlb_mem(int size, int *shmid) int userfaultfd_tests(void) { - int mem_size, vec_size, written, num_pages = 16; + long mem_size, vec_size, written, num_pages = 16; char *mem, *vec; mem_size = num_pages * page_size; @@ -213,7 +213,7 @@ int userfaultfd_tests(void) written = pagemap_ioctl(mem, mem_size, vec, 1, PM_SCAN_WP_MATCHING | PM_SCAN_CHECK_WPASYNC, vec_size - 2, PAGE_IS_WRITTEN, 0, 0, PAGE_IS_WRITTEN); if (written < 0) - ksft_exit_fail_msg("error %d %d %s\n", written, errno, strerror(errno)); + ksft_exit_fail_msg("error %ld %d %s\n", written, errno, strerror(errno)); ksft_test_result(written == 0, "%s all new pages must not be written (dirty)\n", __func__); @@ -244,7 +244,7 @@ int sanity_tests_sd(void) long walk_end; vec_size = num_pages/2; - mem_size = num_pages * (long long)page_size; + mem_size = num_pages * page_size; vec = malloc(sizeof(struct page_region) * vec_size); if (!vec) @@ -432,7 +432,7 @@ int sanity_tests_sd(void) free(vec2); /* 8. Smaller vec */ - mem_size = 1050ULL * page_size; + mem_size = 1050 * page_size; vec_size = mem_size/(page_size*2); vec = malloc(sizeof(struct page_region) * vec_size); @@ -487,7 +487,7 @@ int sanity_tests_sd(void) total_pages = 0; /* 9. Smaller vec */ - mem_size = 10000ULL * page_size; + mem_size = 10000 * page_size; vec_size = 50; vec = malloc(sizeof(struct page_region) * vec_size); @@ -995,7 +995,7 @@ int unmapped_region_tests(void) { void *start = (void *)0x10000000; int written, len = 0x00040000; - int vec_size = len / page_size; + long vec_size = len / page_size; struct page_region *vec = malloc(sizeof(struct page_region) * vec_size); /* 1. Get written pages */ @@ -1051,14 +1051,14 @@ static void test_simple(void) int sanity_tests(void) { unsigned long long mem_size, vec_size; - int ret, fd, i, buf_size; + long ret, fd, i, buf_size; struct page_region *vec; char *mem, *fmem; struct stat sbuf; char *tmp_buf; /* 1. wrong operation */ - mem_size = 10ULL * page_size; + mem_size = 10 * page_size; vec_size = mem_size / page_size; vec = malloc(sizeof(struct page_region) * vec_size); @@ -1160,7 +1160,7 @@ int sanity_tests(void) ret = stat(progname, &sbuf); if (ret < 0) - ksft_exit_fail_msg("error %d %d %s\n", ret, errno, strerror(errno)); + ksft_exit_fail_msg("error %ld %d %s\n", ret, errno, strerror(errno)); fmem = mmap(NULL, sbuf.st_size, PROT_READ, MAP_PRIVATE, fd, 0); if (fmem == MAP_FAILED) @@ -1507,7 +1507,7 @@ int main(int __attribute__((unused)) argc, char *argv[]) sanity_tests_sd(); /* 2. Normal page testing */ - mem_size = 10ULL * page_size; + mem_size = 10 * page_size; mem = mmap(NULL, mem_size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON, -1, 0); if (mem == MAP_FAILED) ksft_exit_fail_msg("error nomem\n"); @@ -1520,7 +1520,7 @@ int main(int __attribute__((unused)) argc, char *argv[]) munmap(mem, mem_size); /* 3. Large page testing */ - mem_size = 512ULL * 10 * page_size; + mem_size = 512 * 10 * page_size; mem = mmap(NULL, mem_size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON, -1, 0); if (mem == MAP_FAILED) ksft_exit_fail_msg("error nomem\n"); -- 2.43.0

6 months, 2 weeks

1
0
0 0

ISC West 2025 Attendee Data to Drive Sales and Networking Efforts

by Sara Wood

Hi , Are you considering getting the ICS West 2025 attendees list? Expo Name: International Security Conference & Exposition West 2025 Total Number of records: 23,000 records List includes: Company Name, Contact Name, Job Title, Mailing Address, Phone, Emails, etc. Do you want to acquire these leads? If so, I'm happy to send the pricing details. Eager for your response Regards Sara Wood Demand Generation Manager Leads Data Inc., Please reply with REMOVE if you don't wish to receive further emails

6 months, 2 weeks

1
0
0 0

[PATCH] selftests/nolibc: drop unnecessary sys/io.h include

by Thomas Weißschuh

The include of sys/io.h is not necessary anymore since commit 67eb617a8e1e ("selftests/nolibc: simplify call to ioperm"). It's existence is also problematic as the header does not exist on all architectures. Reported-by: Sebastian Andrzej Siewior <sebastian(a)breakpoint.cc> Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- tools/testing/selftests/nolibc/nolibc-test.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index 5884a891c491544050fc35b07322c73a1a9dbaf3..7a60b6ac1457e8d862ab1a6a26c9e46abec92111 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -16,7 +16,6 @@ #ifndef _NOLIBC_STDIO_H /* standard libcs need more includes */ #include <sys/auxv.h> -#include <sys/io.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <sys/mount.h> --- base-commit: bceb73904c855c78402dca94c82915f078f259dd change-id: 20250324-nolibc-ioperm-155646560b95 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

6 months, 2 weeks

3
2
0 0

[PATCH 0/2] ublk: specify io_cmd_buf pointer type

by Caleb Sander Mateos

io_cmd_buf points to an array of ublksrv_io_desc structs but its type is char *. Indexing the array requires an explicit multiplication and cast. The compiler also can't check the pointer types. Change io_cmd_buf's type to struct ublksrv_io_desc * so it can be indexed directly and the compiler can type-check the code. Make the same change to the ublk selftests. Caleb Sander Mateos (2): ublk: specify io_cmd_buf pointer type selftests: ublk: specify io_cmd_buf pointer type drivers/block/ublk_drv.c | 8 ++++---- tools/testing/selftests/ublk/kublk.c | 2 +- tools/testing/selftests/ublk/kublk.h | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) -- 2.45.2

6 months, 2 weeks

4
6
0 0

[PATCH net-next v9 0/6] tun: Introduce virtio-net hashing feature

by Akihiko Odaki

virtio-net have two usage of hashes: one is RSS and another is hash reporting. Conventionally the hash calculation was done by the VMM. However, computing the hash after the queue was chosen defeats the purpose of RSS. Another approach is to use eBPF steering program. This approach has another downside: it cannot report the calculated hash due to the restrictive nature of eBPF. Introduce the code to compute hashes to the kernel in order to overcome thse challenges. An alternative solution is to extend the eBPF steering program so that it will be able to report to the userspace, but it is based on context rewrites, which is in feature freeze. We can adopt kfuncs, but they will not be UAPIs. We opt to ioctl to align with other relevant UAPIs (KVM and vhost_net). The patches for QEMU to use this new feature was submitted as RFC and is available at: https://patchew.org/QEMU/20240915-hash-v3-0-79cb08d28647@daynix.com/ This work was presented at LPC 2024: https://lpc.events/event/18/contributions/1963/ V1 -> V2: Changed to introduce a new BPF program type. Signed-off-by: Akihiko Odaki <akihiko.odaki(a)daynix.com> --- Changes in v9: - Added a missing return statement in patch "tun: Introduce virtio-net hash feature". - Link to v8: https://lore.kernel.org/r/20250306-rss-v8-0-7ab4f56ff423@daynix.com Changes in v8: - Disabled IPv6 to eliminate noises in tests. - Added a branch in tap to avoid unnecessary dissection when hash reporting is disabled. - Removed unnecessary rtnl_lock(). - Extracted code to handle new ioctls into separate functions to avoid adding extra NULL checks to the code handling other ioctls. - Introduced variable named "fd" to __tun_chr_ioctl(). - s/-/=/g in a patch message to avoid confusing Git. - Link to v7: https://lore.kernel.org/r/20250228-rss-v7-0-844205cbbdd6@daynix.com Changes in v7: - Ensured to set hash_report to VIRTIO_NET_HASH_REPORT_NONE for VHOST_NET_F_VIRTIO_NET_HDR. - s/4/sizeof(u32)/ in patch "virtio_net: Add functions for hashing". - Added tap_skb_cb type. - Rebased. - Link to v6: https://lore.kernel.org/r/20250109-rss-v6-0-b1c90ad708f6@daynix.com Changes in v6: - Extracted changes to fill vnet header holes into another series. - Squashed patches "skbuff: Introduce SKB_EXT_TUN_VNET_HASH", "tun: Introduce virtio-net hash reporting feature", and "tun: Introduce virtio-net RSS" into patch "tun: Introduce virtio-net hash feature". - Dropped the RFC tag. - Link to v5: https://lore.kernel.org/r/20241008-rss-v5-0-f3cf68df005d@daynix.com Changes in v5: - Fixed a compilation error with CONFIG_TUN_VNET_CROSS_LE. - Optimized the calculation of the hash value according to: https://git.dpdk.org/dpdk/commit/?id=3fb1ea032bd6ff8317af5dac9af901f1f324ca… - Added patch "tun: Unify vnet implementation". - Dropped patch "tap: Pad virtio header with zero". - Added patch "selftest: tun: Test vnet ioctls without device". - Reworked selftests to skip for older kernels. - Documented the case when the underlying device is deleted and packets have queue_mapping set by TC. - Reordered test harness arguments. - Added code to handle fragmented packets. - Link to v4: https://lore.kernel.org/r/20240924-rss-v4-0-84e932ec0e6c@daynix.com Changes in v4: - Moved tun_vnet_hash_ext to if_tun.h. - Renamed virtio_net_toeplitz() to virtio_net_toeplitz_calc(). - Replaced htons() with cpu_to_be16(). - Changed virtio_net_hash_rss() to return void. - Reordered variable declarations in virtio_net_hash_rss(). - Removed virtio_net_hdr_v1_hash_from_skb(). - Updated messages of "tap: Pad virtio header with zero" and "tun: Pad virtio header with zero". - Fixed vnet_hash allocation size. - Ensured to free vnet_hash when destructing tun_struct. - Link to v3: https://lore.kernel.org/r/20240915-rss-v3-0-c630015db082@daynix.com Changes in v3: - Reverted back to add ioctl. - Split patch "tun: Introduce virtio-net hashing feature" into "tun: Introduce virtio-net hash reporting feature" and "tun: Introduce virtio-net RSS". - Changed to reuse hash values computed for automq instead of performing RSS hashing when hash reporting is requested but RSS is not. - Extracted relevant data from struct tun_struct to keep it minimal. - Added kernel-doc. - Changed to allow calling TUNGETVNETHASHCAP before TUNSETIFF. - Initialized num_buffers with 1. - Added a test case for unclassified packets. - Fixed error handling in tests. - Changed tests to verify that the queue index will not overflow. - Rebased. - Link to v2: https://lore.kernel.org/r/20231015141644.260646-1-akihiko.odaki@daynix.com --- Akihiko Odaki (6): virtio_net: Add functions for hashing net: flow_dissector: Export flow_keys_dissector_symmetric tun: Introduce virtio-net hash feature selftest: tun: Test vnet ioctls without device selftest: tun: Add tests for virtio-net hashing vhost/net: Support VIRTIO_NET_F_HASH_REPORT Documentation/networking/tuntap.rst | 7 + drivers/net/Kconfig | 1 + drivers/net/tap.c | 68 +++- drivers/net/tun.c | 98 +++++- drivers/net/tun_vnet.h | 159 ++++++++- drivers/vhost/net.c | 49 +-- include/linux/if_tap.h | 2 + include/linux/skbuff.h | 3 + include/linux/virtio_net.h | 188 ++++++++++ include/net/flow_dissector.h | 1 + include/uapi/linux/if_tun.h | 75 ++++ net/core/flow_dissector.c | 3 +- net/core/skbuff.c | 4 + tools/testing/selftests/net/Makefile | 2 +- tools/testing/selftests/net/tun.c | 656 ++++++++++++++++++++++++++++++++++- 15 files changed, 1255 insertions(+), 61 deletions(-) --- base-commit: dd83757f6e686a2188997cb58b5975f744bb7786 change-id: 20240403-rss-e737d89efa77 prerequisite-change-id: 20241230-tun-66e10a49b0c7:v6 prerequisite-patch-id: 871dc5f146fb6b0e3ec8612971a8e8190472c0fb prerequisite-patch-id: 2797ed249d32590321f088373d4055ff3f430a0e prerequisite-patch-id: ea3370c72d4904e2f0536ec76ba5d26784c0cede prerequisite-patch-id: 837e4cf5d6b451424f9b1639455e83a260c4440d prerequisite-patch-id: ea701076f57819e844f5a35efe5cbc5712d3080d prerequisite-patch-id: 701646fb43ad04cc64dd2bf13c150ccbe6f828ce prerequisite-patch-id: 53176dae0c003f5b6c114d43f936cf7140d31bb5 prerequisite-change-id: 20250116-buffers-96e14bf023fc:v2 prerequisite-patch-id: 25fd4f99d4236a05a5ef16ab79f3e85ee57e21cc Best regards, -- Akihiko Odaki <akihiko.odaki(a)daynix.com>

6 months, 2 weeks

4
53
0 0

[PATCH] selftests/mm: Fix loss of information warnings

by Siddarth G

Cppcheck reported a style warning: int result is assigned to long long variable. If the variable is long long to avoid loss of information, then you have loss of information. Changing the type of page_size from 'unsigned int' to 'unsigned long long' was considered. But that might cause new conversion issues in other parts of the code where calculations involving 'page_size' are assigned to int variables. So we approach by appending ULL suffixes Reported-by: David Binderman <dcb314(a)hotmail.com> Closes: https://lore.kernel.org/all/AS8PR02MB10217315060BBFDB21F19643E9CA62@AS8PR02… Signed-off-by: Siddarth G <siddarthsgml(a)gmail.com> --- tools/testing/selftests/mm/pagemap_ioctl.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/mm/pagemap_ioctl.c b/tools/testing/selftests/mm/pagemap_ioctl.c index 57b4bba2b45f..f3b12402ca89 100644 --- a/tools/testing/selftests/mm/pagemap_ioctl.c +++ b/tools/testing/selftests/mm/pagemap_ioctl.c @@ -244,7 +244,7 @@ int sanity_tests_sd(void) long walk_end; vec_size = num_pages/2; - mem_size = num_pages * page_size; + mem_size = num_pages * (long long)page_size; vec = malloc(sizeof(struct page_region) * vec_size); if (!vec) @@ -432,7 +432,7 @@ int sanity_tests_sd(void) free(vec2); /* 8. Smaller vec */ - mem_size = 1050 * page_size; + mem_size = 1050ULL * page_size; vec_size = mem_size/(page_size*2); vec = malloc(sizeof(struct page_region) * vec_size); @@ -487,7 +487,7 @@ int sanity_tests_sd(void) total_pages = 0; /* 9. Smaller vec */ - mem_size = 10000 * page_size; + mem_size = 10000ULL * page_size; vec_size = 50; vec = malloc(sizeof(struct page_region) * vec_size); @@ -1058,7 +1058,7 @@ int sanity_tests(void) char *tmp_buf; /* 1. wrong operation */ - mem_size = 10 * page_size; + mem_size = 10ULL * page_size; vec_size = mem_size / page_size; vec = malloc(sizeof(struct page_region) * vec_size); @@ -1507,7 +1507,7 @@ int main(int __attribute__((unused)) argc, char *argv[]) sanity_tests_sd(); /* 2. Normal page testing */ - mem_size = 10 * page_size; + mem_size = 10ULL * page_size; mem = mmap(NULL, mem_size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON, -1, 0); if (mem == MAP_FAILED) ksft_exit_fail_msg("error nomem\n"); @@ -1520,7 +1520,7 @@ int main(int __attribute__((unused)) argc, char *argv[]) munmap(mem, mem_size); /* 3. Large page testing */ - mem_size = 512 * 10 * page_size; + mem_size = 512ULL * 10 * page_size; mem = mmap(NULL, mem_size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON, -1, 0); if (mem == MAP_FAILED) ksft_exit_fail_msg("error nomem\n"); -- 2.43.0

6 months, 2 weeks

2
1
0 0

bug report for linux-6.14/tools/testing/selftests/mm/pagemap_ioctl.c

by David Binderman

Hello there, Static analyser cppcheck says: > linux-6.14/tools/testing/selftests/mm/pagemap_ioctl.c:1061:11: style: int result is assigned to long long variable. If the variable is long long to avoid loss of information, then you have loss of information. [truncLongCastAssignment] > linux-6.14/tools/testing/selftests/mm/pagemap_ioctl.c:1510:11: style: int result is assigned to long long variable. If the variable is long long to avoid loss of information, then you have loss of information. [truncLongCastAssignment] > linux-6.14/tools/testing/selftests/mm/pagemap_ioctl.c:1523:11: style: int result is assigned to long long variable. If the variable is long long to avoid loss of information, then you have loss of information. [truncLongCastAssignment] > linux-6.14/tools/testing/selftests/mm/pagemap_ioctl.c:247:11: style: int result is assigned to long long variable. If the variable is long long to avoid loss of information, then you have loss of information. [truncLongCastAssignment] > linux-6.14/tools/testing/selftests/mm/pagemap_ioctl.c:435:11: style: int result is assigned to long long variable. If the variable is long long to avoid loss of information, then you have loss of information. [truncLongCastAssignment] > linux-6.14/tools/testing/selftests/mm/pagemap_ioctl.c:490:11: style: int result is assigned to long long variable. If the variable is long long to avoid loss of information, then you have loss of information. [truncLongCastAssignment] The source code of the first one is mem_size = 10 * page_size; Maybe better code: mem_size = 10ULL * page_size; Regards David Binderman

6 months, 2 weeks

2
1
0 0

Symbol too long for allsyms warnings on KSYM_NAME_LEN

by Arnd Bergmann

My randconfig builds sometimes (around one in every 700 configs) run into this warning on x86: Symbol __pfx_snnnng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nnng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nnnng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nnng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nnnnng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nnng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nnnng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nnng1h2i3j4k5l6m7ng1h2i3j4k5l6m7nng1h2i3j4k5l6m7ng1h2i3j4k5l6m7n too long for kallsyms (517 >= 512). Please increase KSYM_NAME_LEN both in kernel and kallsyms.c The check that gets triggered was added in commit c104c16073b ("Kunit to check the longest symbol length"), see https://lore.kernel.org/all/20241117195923.222145-1-sergio.collado@gmail.co… and the overlong identifier seems to be the result of objtool adding the six-byte "__pfx_" string to a symbol in elf_create_prefix_symbol() when CONFIG_FUNCTION_PADDING_CFI is set. I think the suggestion to "Please increase KSYM_NAME_LEN both in kernel and kallsyms.c" is misleading here and should probably be changed. I don't know if this something that objtool should work around, or something that needs to be adapted in the test. Arnd

6 months, 2 weeks

2
2
0 0

Re: [PATCH v7 09/28] landlock: Add AUDIT_LANDLOCK_ACCESS and log ptrace denials

by Mickaël Salaün

On Thu, Mar 27, 2025 at 09:38:05PM +0000, Tingmao Wang wrote: > Hi Mickaël, Hi, thanks for the report. > > On 3/20/25 19:06, Mickaël Salaün wrote: > [...] > > +static struct landlock_hierarchy * > > +get_hierarchy(const struct landlock_ruleset *const domain, const size_t layer) > > +{ > > + struct landlock_hierarchy *hierarchy = domain->hierarchy; > > + ssize_t i; > > + > > + if (WARN_ON_ONCE(layer >= domain->num_layers)) > > + return hierarchy; > > + > > + for (i = domain->num_layers - 1; i > layer; i--) { > > + if (WARN_ON_ONCE(!hierarchy->parent)) > > + break; > > + > > + hierarchy = hierarchy->parent; > > + } > > + > > + return hierarchy; > > +} > > + > > +#ifdef CONFIG_SECURITY_LANDLOCK_KUNIT_TEST > > + > > +static void test_get_hierarchy(struct kunit *const test) > > +{ > > + struct landlock_hierarchy dom0_hierarchy = { > > + .id = 10, > > + }; > > + struct landlock_hierarchy dom1_hierarchy = { > > + .parent = &dom0_hierarchy, > > + .id = 20, > > + }; > > + struct landlock_hierarchy dom2_hierarchy = { > > + .parent = &dom1_hierarchy, > > + .id = 30, > > + }; > > + struct landlock_ruleset dom2 = { > > + .hierarchy = &dom2_hierarchy, > > + .num_layers = 3, > > + }; > > + > > + KUNIT_EXPECT_EQ(test, 10, get_hierarchy(&dom2, 0)->id); > > + KUNIT_EXPECT_EQ(test, 20, get_hierarchy(&dom2, 1)->id); > > + KUNIT_EXPECT_EQ(test, 30, get_hierarchy(&dom2, 2)->id); > > + KUNIT_EXPECT_EQ(test, 30, get_hierarchy(&dom2, -1)->id); > > This causes a warning from WARN_ON_ONCE(layer >= domain->num_layers) > when running this test, I guess because layer is unsigned. Interestingly this doesn't make the test to fail (because the result is still correct), nor to show up when using tools/testing/kunit/kunit.py, which is why I didn't see that. > Should it > be ssize_t, if this is an expected usage? The get_hierarchy() code is correct, and the KUnit test is correct too. Using a ssize_t would introduce a bug. The issue is that I wanted to test a case that should never happen, hence the WARN_ON_ONCE(). I guess the best "fix" for now would be to remove the KUnit test with -1, but there is a new KUnit feature to hide this kind of warning: https://lore.kernel.org/linux-kselftest/20250313114329.284104-1-acarmina@re… It is currently in linux-next, but I'm not sure it will be merged in Linux 6.15 . For now I'll keep this commit but I'll send a fix/update to either remove the test or use the new DEFINE_SUPPRESSED_WARNING macros depending on its merge status. > > ------------[ cut here ]------------ > WARNING: CPU: 7 PID: 145 at security/landlock/audit.c:142 get_hierarchy (security/landlock/audit.c:142) > Modules linked in: > CPU: 7 UID: 0 PID: 145 Comm: kunit_try_catch Tainted: G N 6.14.0-next-20250326-dev-00004-g4e57edc3e062-dirty #5 PREEMPT(undef) > Tainted: [N]=TEST > Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 > RIP: 0010:get_hierarchy (security/landlock/audit.c:142) > Code: 83 e8 02 e8 18 00 84 c0 75 02 0f 0b 48 83 c4 08 48 89 d8 5b 41 5c 41 5e 5d c3 48 c7 c7 00 f3 21 83 e8 e2 e7 18 00 84 c0 75 e2 <0f> 0b eb de 48 89 75 e0 e8 a1 a9 a7 ff 48 8b 75 e0 e9 76 ff ff ff > // snip // > Call Trace: > <TASK> > test_get_hierarchy (security/landlock/audit.c:178 (discriminator 5)) > ? test_get_denied_layer (security/landlock/audit.c:158) > ? lock_repin_lock (kernel/locking/lockdep.c:5649 kernel/locking/lockdep.c:5978) > ? __lock_acquire (kernel/locking/lockdep.c:4675 kernel/locking/lockdep.c:5189) > ? _raw_spin_unlock_irqrestore (./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194) > ? find_held_lock (kernel/locking/lockdep.c:5348) > ? trace_irq_enable (./include/trace/events/preemptirq.h:40 (discriminator 17)) > ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:80) > ? kvm_clock_get_cycles (./arch/x86/include/asm/preempt.h:95 arch/x86/kernel/kvmclock.c:80 arch/x86/kernel/kvmclock.c:86) > ? ktime_get_ts64 (kernel/time/timekeeping.c:318 (discriminator 4) kernel/time/timekeeping.c:335 (discriminator 4) kernel/time/timekeeping.c:907 (discriminator 4)) > kunit_try_run_case (lib/kunit/test.c:400 lib/kunit/test.c:443) > ? kunit_try_run_case_cleanup (lib/kunit/test.c:430) > >

6 months, 2 weeks

1
0
0 0

[PATCH] kunit: Spelling s/slowm/slow/

by Geert Uytterhoeven

Fix a misspelling of "slow". Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> --- include/kunit/test.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index 58dbab60f8530588..9b773406e01f3c43 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -67,7 +67,7 @@ enum kunit_status { /* * Speed Attribute is stored as an enum and separated into categories of - * speed: very_slowm, slow, and normal. These speeds are relative to + * speed: very_slow, slow, and normal. These speeds are relative to * other KUnit tests. * * Note: unset speed attribute acts as default of KUNIT_SPEED_NORMAL. -- 2.43.0

6 months, 2 weeks

2
1
0 0

[GIT PULL] Kselftest next update for Linux 6.15-rc1

by Shuah Khan

Hi Linus, Please pull the following kselftest next update for Linux 6.15-rc1. Fixes bugs and cleans up code in tracing, ftrace, and user_events tests. Adds missing executables to ftrace gitignore. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit a64dcfb451e254085a7daee5fe51bf22959d52d3: Linux 6.14-rc2 (2025-02-09 12:45:03 -0800) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux_kselftest-next-6.15-rc1 for you to fetch changes up to 82ef781f24ac26f4aa71f02d7624c439ab8389a7: selftests/ftrace: add 'poll' binary to gitignore (2025-03-04 08:51:17 -0700) ---------------------------------------------------------------- linux_kselftest-next-6.15-rc1 Fixes bugs and cleans up code in tracing, ftrace, and user_events tests. Adds missing executables to ftrace gitignore. ---------------------------------------------------------------- Bharadwaj Raju (1): selftests/ftrace: add 'poll' binary to gitignore Heiko Carstens (1): selftests/ftrace: Use readelf to find entry point in uprobe test Steven Rostedt (3): selftests/tracing: Test only toplevel README file not the instances selftests/ftrace: Clean up triggers after setting them selftests/tracing: Allow some more tests to run in instances Yiqian Xun (1): selftests/user_events: Fix failures caused by test code tools/testing/selftests/ftrace/.gitignore | 1 + .../selftests/ftrace/test.d/dynevent/add_remove_uprobe.tc | 10 +++++++--- tools/testing/selftests/ftrace/test.d/functions | 8 +++++++- .../test.d/trigger/inter-event/trigger-action-hist-xfail.tc | 1 + .../test.d/trigger/inter-event/trigger-onchange-action-hist.tc | 3 +++ .../test.d/trigger/inter-event/trigger-snapshot-action-hist.tc | 3 +++ .../ftrace/test.d/trigger/trigger-hist-expressions.tc | 1 + tools/testing/selftests/user_events/dyn_test.c | 2 ++ 8 files changed, 25 insertions(+), 4 deletions(-) ----------------------------------------------------------------

6 months, 2 weeks

2
1
0 0

[GIT PULL] kunit next update for Linux 6.15-rc1

by Shuah Khan

Hi Linus, Please pull the following kunit next update for Linux 6.15-rc1. kunit tool: - Changes to kunit tool to use qboot on QEMU x86_64, and build GDB scripts. - Fixes kunit tool bug in parsing test plan. - Adds test to kunit tool to check parsing late test plan. kunit: - Clarifies kunit_skip() argument name. - Adds Kunit check for the longest symbol length. - Changes qemu_configs for sparc to use Zilog console. Conflicts in lib/Makefile between commit: b341f6fd45ab ("blackhole_dev: convert self-test to KUnit") from the net-next tree and commit: c104c16073b7 ("Kunit to check the longest symbol length") The commit c104c16073b7 conflicts with the mainline now with 62f3802332ed ("vdso: add generic time data storage") from kspp is now in the mainline. Stephen has the fixes for these two conflicts in next. (Thank you Stephen) diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit a64dcfb451e254085a7daee5fe51bf22959d52d3: Linux 6.14-rc2 (2025-02-09 12:45:03 -0800) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux_kselftest-kunit-6.15-rc1 for you to fetch changes up to 2e0cf2b32f72b20b0db5cc665cd8465d0f257278: kunit: tool: add test to check parsing late test plan (2025-03-15 18:13:43 -0600) ---------------------------------------------------------------- linux_kselftest-kunit-6.15-rc1 kunit tool: - Changes to kunit tool to use qboot on QEMU x86_64, and build GDB scripts. - Fixes kunit tool bug in parsing test plan. - Adds test to kunit tool to check parsing late test plan. kunit: - Clarifies kunit_skip() argument name. - Adds Kunit check for the longest symbol length. - Changes qemu_configs for sparc to use Zilog console. ---------------------------------------------------------------- Brendan Jackman (2): kunit: tool: Use qboot on QEMU x86_64 kunit: tool: Build GDB scripts Kevin Brodsky (1): kunit: Clarify kunit_skip() argument name Rae Moar (2): kunit: tool: Fix bug in parsing test plan kunit: tool: add test to check parsing late test plan Sergio González Collado (1): Kunit to check the longest symbol length Thomas Weißschuh (1): kunit: qemu_configs: sparc: use Zilog console arch/x86/tools/insn_decoder_test.c | 3 +- include/kunit/test.h | 20 ++++---- lib/Kconfig.debug | 9 ++++ lib/Makefile | 2 + lib/longest_symbol_kunit.c | 82 ++++++++++++++++++++++++++++++ tools/testing/kunit/kunit_kernel.py | 4 +- tools/testing/kunit/kunit_parser.py | 9 ++-- tools/testing/kunit/kunit_tool_test.py | 11 ++++ tools/testing/kunit/qemu_configs/sparc.py | 5 +- tools/testing/kunit/qemu_configs/x86_64.py | 4 +- 10 files changed, 128 insertions(+), 21 deletions(-) create mode 100644 lib/longest_symbol_kunit.c ----------------------------------------------------------------

6 months, 2 weeks

2
1
0 0

[PATCH v7 0/7] rust: reduce `as` casts, enable related lints

by Tamir Duberstein

This started with a patch that enabled `clippy::ptr_as_ptr`. Benno Lossin suggested I also look into `clippy::ptr_cast_constness` and I discovered `clippy::as_ptr_cast_mut`. This series now enables all 3 lints. It also enables `clippy::as_underscore` which ensures other pointer casts weren't missed. The first commit reduces the need for pointer casts and is shared with another series[1]. As a later addition, `clippy::cast_lossless` and `clippy::ref_as_ptr` are also enabled. Link: https://lore.kernel.org/all/20250307-no-offset-v1-0-0c728f63b69c@gmail.com/ [1] Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v7: - Add patch to enable `clippy::ref_as_ptr`. - Link to v6: https://lore.kernel.org/r/20250324-ptr-as-ptr-v6-0-49d1b7fd4290@gmail.com Changes in v6: - Drop strict provenance patch. - Fix URLs in doc comments. - Add patch to enable `clippy::cast_lossless`. - Rebase on rust-next. - Link to v5: https://lore.kernel.org/r/20250317-ptr-as-ptr-v5-0-5b5f21fa230a@gmail.com Changes in v5: - Use `pointer::addr` in OF. (Boqun Feng) - Add documentation on stubs. (Benno Lossin) - Mark stubs `#[inline]`. - Pick up Alice's RB on a shared commit from https://lore.kernel.org/all/Z9f-3Aj3_FWBZRrm@google.com/. - Link to v4: https://lore.kernel.org/r/20250315-ptr-as-ptr-v4-0-b2d72c14dc26@gmail.com Changes in v4: - Add missing SoB. (Benno Lossin) - Use `without_provenance_mut` in alloc. (Boqun Feng) - Limit strict provenance lints to the `kernel` crate to avoid complex logic in the build system. This can be revisited on MSRV >= 1.84.0. - Rebase on rust-next. - Link to v3: https://lore.kernel.org/r/20250314-ptr-as-ptr-v3-0-e7ba61048f4a@gmail.com Changes in v3: - Fixed clippy warning in rust/kernel/firmware.rs. (kernel test robot) Link: https://lore.kernel.org/all/202503120332.YTCpFEvv-lkp@intel.com/ - s/as u64/as bindings::phys_addr_t/g. (Benno Lossin) - Use strict provenance APIs and enable lints. (Benno Lossin) - Link to v2: https://lore.kernel.org/r/20250309-ptr-as-ptr-v2-0-25d60ad922b7@gmail.com Changes in v2: - Fixed typo in first commit message. - Added additional patches, converted to series. - Link to v1: https://lore.kernel.org/r/20250307-ptr-as-ptr-v1-1-582d06514c98@gmail.com --- Tamir Duberstein (7): rust: retain pointer mut-ness in `container_of!` rust: enable `clippy::ptr_as_ptr` lint rust: enable `clippy::ptr_cast_constness` lint rust: enable `clippy::as_ptr_cast_mut` lint rust: enable `clippy::as_underscore` lint rust: enable `clippy::cast_lossless` lint rust: enable `clippy::ref_as_ptr` lint Makefile | 6 ++++++ drivers/gpu/drm/drm_panic_qr.rs | 10 +++++----- rust/bindings/lib.rs | 3 +++ rust/kernel/alloc/allocator_test.rs | 2 +- rust/kernel/alloc/kvec.rs | 4 ++-- rust/kernel/block/mq/operations.rs | 2 +- rust/kernel/block/mq/request.rs | 7 ++++--- rust/kernel/device.rs | 5 +++-- rust/kernel/device_id.rs | 5 +++-- rust/kernel/devres.rs | 19 ++++++++++--------- rust/kernel/dma.rs | 6 +++--- rust/kernel/error.rs | 2 +- rust/kernel/firmware.rs | 3 ++- rust/kernel/fs/file.rs | 3 ++- rust/kernel/io.rs | 18 +++++++++--------- rust/kernel/kunit.rs | 15 +++++++-------- rust/kernel/lib.rs | 5 ++--- rust/kernel/list/impl_list_item_mod.rs | 2 +- rust/kernel/miscdevice.rs | 2 +- rust/kernel/net/phy.rs | 4 ++-- rust/kernel/of.rs | 6 +++--- rust/kernel/pci.rs | 13 ++++++++----- rust/kernel/platform.rs | 6 ++++-- rust/kernel/print.rs | 11 +++++------ rust/kernel/rbtree.rs | 23 ++++++++++------------- rust/kernel/seq_file.rs | 3 ++- rust/kernel/str.rs | 14 +++++++------- rust/kernel/sync/poll.rs | 2 +- rust/kernel/uaccess.rs | 5 +++-- rust/kernel/workqueue.rs | 12 ++++++------ rust/uapi/lib.rs | 3 +++ 31 files changed, 120 insertions(+), 101 deletions(-) --- base-commit: 28bb48c4cb34f65a9aa602142e76e1426da31293 change-id: 20250307-ptr-as-ptr-21b1867fc4d4 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

6 months, 2 weeks

3
26
0 0

[PATCH] rtc: Rename lib_test to rtc_lib_test

by Geert Uytterhoeven

When compiling the RTC library functions test as a module, the module has the non-descriptive name "lib_test.ko". Fix this by adding the subsystem's name as a prefix. Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> --- drivers/rtc/Makefile | 2 +- drivers/rtc/{lib_test.c => rtc_lib_test.c} | 0 2 files changed, 1 insertion(+), 1 deletion(-) rename drivers/rtc/{lib_test.c => rtc_lib_test.c} (100%) diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 489b4ab07068c758..c0ccbbfe2739c1aa 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -15,7 +15,7 @@ rtc-core-$(CONFIG_RTC_INTF_DEV) += dev.o rtc-core-$(CONFIG_RTC_INTF_PROC) += proc.o rtc-core-$(CONFIG_RTC_INTF_SYSFS) += sysfs.o -obj-$(CONFIG_RTC_LIB_KUNIT_TEST) += lib_test.o +obj-$(CONFIG_RTC_LIB_KUNIT_TEST) += rtc_lib_test.o # Keep the list ordered. diff --git a/drivers/rtc/lib_test.c b/drivers/rtc/rtc_lib_test.c similarity index 100% rename from drivers/rtc/lib_test.c rename to drivers/rtc/rtc_lib_test.c -- 2.43.0

6 months, 2 weeks

1
0
0 0

[PATCH] selftest/mm: va_high_addr_switch: add ppc64 support check

by Li Wang

This patch adds PPC64 Radix MMU support to the va_high_addr_switch.sh by introducing check_supported_ppc64(). The function verifies: - 5-level paging (PGTABLE_LEVELS >= 5) enable in kernel config - Radix MMU (required for PPC64 5-level translation) - HugePages availability (needed for some tests) If any check fails, the test is skipped (ksft_skip). This ensures compatibility with Power9/Power10 systems running in Radix MMU mode. Avoid failures on 4-level paging system: # mmap(NULL, MAP_HUGETLB): 0xffffffffffffffff - FAILED # mmap(LOW_ADDR, MAP_HUGETLB): 0xffffffffffffffff - FAILED # mmap(HIGH_ADDR, MAP_HUGETLB): 0xffffffffffffffff - FAILED # mmap(HIGH_ADDR, MAP_HUGETLB) again: 0xffffffffffffffff - FAILED # mmap(HIGH_ADDR, MAP_FIXED | MAP_HUGETLB): 0xffffffffffffffff - FAILED # mmap(-1, MAP_HUGETLB): 0xffffffffffffffff - FAILED # mmap(-1, MAP_HUGETLB) again: 0xffffffffffffffff - FAILED # mmap(ADDR_SWITCH_HINT - PAGE_SIZE, 2*HUGETLB_SIZE, MAP_HUGETLB): 0xffffffffffffffff - FAILED # mmap(ADDR_SWITCH_HINT , 2*HUGETLB_SIZE, MAP_FIXED | MAP_HUGETLB): 0xffffffffffffffff - FAILED Signed-off-by: Li Wang <liwang(a)redhat.com> --- .../selftests/mm/va_high_addr_switch.sh | 28 +++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/tools/testing/selftests/mm/va_high_addr_switch.sh b/tools/testing/selftests/mm/va_high_addr_switch.sh index 2c725773cd79..1f92e8caceac 100755 --- a/tools/testing/selftests/mm/va_high_addr_switch.sh +++ b/tools/testing/selftests/mm/va_high_addr_switch.sh @@ -41,6 +41,31 @@ check_supported_x86_64() fi } +check_supported_ppc64() +{ + local config="/proc/config.gz" + [[ -f "${config}" ]] || config="/boot/config-$(uname -r)" + [[ -f "${config}" ]] || fail "Cannot find kernel config in /proc or /boot" + + local pg_table_levels=$(gzip -dcfq "${config}" | grep PGTABLE_LEVELS | cut -d'=' -f 2) + if [[ "${pg_table_levels}" -lt 5 ]]; then + echo "$0: PGTABLE_LEVELS=${pg_table_levels}, must be >= 5 to run this test" + exit $ksft_skip + fi + + local mmu_support=$(grep -m1 "mmu" /proc/cpuinfo | awk '{print $3}') + if [[ "$mmu_support" != "radix" ]]; then + echo "$0: System does not use Radix MMU, required for 5-level paging" + exit $ksft_skip + fi + + local hugepages_total=$(awk '/HugePages_Total/ {print $2}' /proc/meminfo) + if [[ "${hugepages_total}" -eq 0 ]]; then + echo "$0: HugePages are not enabled, required for some tests" + exit $ksft_skip + fi +} + check_test_requirements() { # The test supports x86_64 and powerpc64. We currently have no useful @@ -50,6 +75,9 @@ check_test_requirements() "x86_64") check_supported_x86_64 ;; + "ppc64le"|"ppc64") + check_supported_ppc64 + ;; *) return 0 ;; -- 2.48.1

6 months, 2 weeks

1
0
0 0

[RFC PATCH v3 0/8] PMU partitioning driver support

by Colton Lewis

This series introduces support in the KVM and ARM PMUv3 driver for partitioning PMU counters into two separate ranges by taking advantage of the MDCR_EL2.HPMN register field. The advantage of a partitioned PMU would be to allow KVM guests direct access to a subset of PMU functionality, greatly reducing the overhead of performance monitoring in guests. While this feature could be accepted on its own merits, practically there is a lot more to be done before it will be fully useful, so I'm sending as an RFC for now. v3: * Include cpucap definition for FEAT_HPMN0 to allow for setting HPMN to 0 * Include PMU header cleanup provided by Marc [1] with some minor changes so compilation works * Pull functions out of pmu-emul.c that aren't specific to the emulated PMU. This and the previous item aren't strictly needed but they provide a nicer starting point. * As suggested by Oliver, start a file for partitioned PMU functions and move the reserved_host_counters parameter and MDCR handling into KVM so the driver does not have to know about it and we need fewer hacks to keep the driver working on 32-bit ARM. This was not a complete separation because the driver still needs to start and stop the host counters all at once and needs to toggle MDCR_EL2.HPME to do that. Introduce kvm_pmu_host_counters_{enable,disable}() functions to handle this and define them as no ops on 32-bit ARM. * As suggested by Oliver, don't limit PMCR.N on emulated PMU. This value will be read correctly when the right traps are disabled to use the partitioned PMU v2: https://lore.kernel.org/kvm/20250208020111.2068239-1-coltonlewis@google.com/ v1: https://lore.kernel.org/kvm/20250127222031.3078945-1-coltonlewis@google.com/ [1] https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?… Colton Lewis (7): arm64: cpufeature: Add cap for HPMN0 arm64: Generate sign macro for sysreg Enums KVM: arm64: Reorganize PMU functions KVM: arm64: Introduce module param to partition the PMU perf: arm_pmuv3: Generalize counter bitmasks perf: arm_pmuv3: Keep out of guest counter partition KVM: arm64: selftests: Reword selftests error Marc Zyngier (1): KVM: arm64: Cleanup PMU includes arch/arm/include/asm/arm_pmuv3.h | 2 + arch/arm64/include/asm/arm_pmuv3.h | 2 +- arch/arm64/include/asm/kvm_host.h | 199 +++++++- arch/arm64/include/asm/kvm_pmu.h | 47 ++ arch/arm64/kernel/cpufeature.c | 8 + arch/arm64/kvm/Makefile | 2 +- arch/arm64/kvm/arm.c | 1 - arch/arm64/kvm/debug.c | 10 +- arch/arm64/kvm/hyp/include/hyp/switch.h | 1 + arch/arm64/kvm/pmu-emul.c | 464 +----------------- arch/arm64/kvm/pmu-part.c | 63 +++ arch/arm64/kvm/pmu.c | 454 +++++++++++++++++ arch/arm64/kvm/sys_regs.c | 2 + arch/arm64/tools/cpucaps | 1 + arch/arm64/tools/gen-sysreg.awk | 1 + arch/arm64/tools/sysreg | 6 +- drivers/perf/arm_pmuv3.c | 73 ++- include/kvm/arm_pmu.h | 204 -------- include/linux/perf/arm_pmu.h | 16 +- include/linux/perf/arm_pmuv3.h | 27 +- .../selftests/kvm/arm64/vpmu_counter_access.c | 2 +- virt/kvm/kvm_main.c | 1 + 22 files changed, 882 insertions(+), 704 deletions(-) create mode 100644 arch/arm64/include/asm/kvm_pmu.h create mode 100644 arch/arm64/kvm/pmu-part.c delete mode 100644 include/kvm/arm_pmu.h base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b -- 2.48.1.601.g30ceb7b040-goog

6 months, 2 weeks

3
16
0 0

[PATCH v7 0/3] Enable Zicbom in usermode

by Yunhui Cui

v1/v2: There is only the first patch: RISC-V: Enable cbo.clean/flush in usermode, which mainly removes the enabling of cbo.inval in user mode. v3: Add the functionality of Expose Zicbom and selftests for Zicbom. v4: Modify the order of macros, The test_no_cbo_inval function is added separately. v5: 1. Modify the order of RISCV_HWPROBE_KEY_ZICBOM_BLOCK_SIZE in hwprobe.rst 2. "TEST_NO_ZICBOINVAL" -> "TEST_NO_CBO_INVAL" v6: Change hwprobe_ext0_has's second param to u64. v7: Rebase to the latest code of linux-next. Yunhui Cui (3): RISC-V: Enable cbo.clean/flush in usermode RISC-V: hwprobe: Expose Zicbom extension and its block size RISC-V: selftests: Add TEST_ZICBOM into CBO tests Documentation/arch/riscv/hwprobe.rst | 6 ++ arch/riscv/include/asm/hwprobe.h | 2 +- arch/riscv/include/uapi/asm/hwprobe.h | 2 + arch/riscv/kernel/cpufeature.c | 8 +++ arch/riscv/kernel/sys_hwprobe.c | 8 ++- tools/testing/selftests/riscv/hwprobe/cbo.c | 66 +++++++++++++++++---- 6 files changed, 79 insertions(+), 13 deletions(-) -- 2.39.2

6 months, 3 weeks

2
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror