- Linux-kselftest-mirror - lists.linaro.org

[PATCH 0/3] selftests: bpf: Migrate test_xdp_redirect.sh to test_progs

by Bastien Curutchet (eBPF Foundation)

Hi all, This patch series continues the work to migrate the *.sh tests into prog_tests. test_xdp_redirect.sh tests the XDP redirections done through bpf_redirect(). These XDP redirections are already tested by prog_tests/xdp_do_redirect.c but IMO it doesn't cover the exact same code path because xdp_do_redirect.c uses bpf_prog_test_run_opts() to trigger redirections of 'fake packets' while test_xdp_redirect.sh redirects packets coming from the network. Also, the test_xdp_redirect.sh script tests the redirections with both SKB and DRV modes while xdp_do_redirect.c only tests the DRV mode. The patch series adds two new test cases in prog_tests/xdp_do_redirect.c to replace the test_xdp_redirect.sh script. Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com> --- Bastien Curutchet (eBPF Foundation) (3): selftests/bpf: test_xdp_redirect: Rename BPF sections selftests/bpf: Migrate test_xdp_redirect.sh to xdp_do_redirect.c selftests/bpf: Migrate test_xdp_redirect.c to test_xdp_do_redirect.c tools/testing/selftests/bpf/Makefile | 1 - .../selftests/bpf/prog_tests/xdp_do_redirect.c | 192 +++++++++++++++++++++ .../selftests/bpf/progs/test_xdp_do_redirect.c | 12 ++ .../selftests/bpf/progs/test_xdp_redirect.c | 26 --- tools/testing/selftests/bpf/test_xdp_redirect.sh | 79 --------- 5 files changed, 204 insertions(+), 106 deletions(-) --- base-commit: da86bde1e6d1b887efc46af5ee1f9bbccd27233e change-id: 20241219-xdp_redirect-2b8ec79dc24e Best regards, -- Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com>

10 months, 1 week

4
10
0 0

[PATCH v4 0/9] arm64: Support 2024 dpISA extensions

by Mark Brown

The 2024 architecture release includes a number of data processing extensions, mostly SVE and SME additions with a few others. These are all very straightforward extensions which add instructions but no architectural state so only need hwcaps and exposing of the ID registers to KVM guests and userspace. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v4: - Fix encodings for ID_AA64ISAR3_EL1. - Link to v3: https://lore.kernel.org/r/20241203-arm64-2024-dpisa-v3-0-a6c78b1aa297@kerne… Changes in v3: - Commit log update for the hwcap test. - Link to v2: https://lore.kernel.org/r/20241030-arm64-2024-dpisa-v2-0-b6601a15d2a5@kerne… Changes in v2: - Filter KVM guest visible bitfields in ID_AA64ISAR3_EL1 to only those we make writeable. - Link to v1: https://lore.kernel.org/r/20241028-arm64-2024-dpisa-v1-0-a38d08b008a8@kerne… --- Mark Brown (9): arm64/sysreg: Update ID_AA64PFR2_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64ISAR3_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09 arm64/hwcap: Describe 2024 dpISA extensions to userspace KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1 kselftest/arm64: Add 2024 dpISA extensions to hwcap test Documentation/arch/arm64/elf_hwcaps.rst | 51 ++++++ arch/arm64/include/asm/hwcap.h | 17 ++ arch/arm64/include/uapi/asm/hwcap.h | 17 ++ arch/arm64/kernel/cpufeature.c | 35 ++++ arch/arm64/kernel/cpuinfo.c | 17 ++ arch/arm64/kvm/sys_regs.c | 6 +- arch/arm64/tools/sysreg | 87 +++++++++- tools/testing/selftests/arm64/abi/hwcap.c | 273 +++++++++++++++++++++++++++++- 8 files changed, 493 insertions(+), 10 deletions(-) --- base-commit: 40384c840ea1944d7c5a392e8975ed088ecf0b37 change-id: 20241008-arm64-2024-dpisa-8091074a7f48 Best regards, -- Mark Brown <broonie(a)kernel.org>

10 months, 1 week

3
15
0 0

[PATCH 00/14] pkeys kselftests improvements

by Kevin Brodsky

This series brings various cleanups and fixes for the mm (mostly pkeys) kselftests. The original goal was to make the pkeys tests work out of the box and without build warning - it turned out to be more involved than expected. The most important change is enabling -O2 when building all mm kselftests (patch 5). This is actually needed for the pkeys tests to run successfully (see gcc command line at the top of protection_keys.c and pkey_sighandler_tests.c), and seems to have no negative impact on the other tests. It certainly can't hurt performance! The following patches address a few obvious issues in the pkeys tests (unused code, bad scope for functions/variables, etc.) and finally make a couple of small improvements. There is one ugliness that this series does not fix: some functions in pkey-<arch>.h call functions that are actually defined in protection_keys.c. For instance, expect_fault_on_read_execonly_key() in pkey-x86.h calls expected_pkey_fault(). This means that other test programs that use pkey-helpers.h (namely pkey_sighandler_tests) would fail to link if they called such functions defined in pkey-<arch>.h. Fixing this would require a more comprehensive reorganisation of the pkey-* headers, which doesn't seem worth it (patch 9 adds a comment to pkey-helpers.h to clarify the situation). Some more details on the patches: - Patch 1 is an unrelated fix that was revealed by inspecting a warning. It seems fairly harmless though, so I thought I'd just post it as part of this series. - Patch 2-5 fix various warnings that come up by building the mm tests at -O2 and finally enable -O2. - Patch 6-12 are various cleanups for the pkeys tests. Patch 11 in particular enables is_pkeys_supported() to be called from outside protection_keys.c (patch 13 relies on this). - Patch 13-14 are small improvements to pkey_sighandler_tests.c. Many thanks to Ryan Roberts for checking that the mm tests still run fine on arm64 with those patches applied. I've also checked that the pkeys tests run fine on arm64 and x86. - Kevin --- Cc: akpm(a)linux-foundation.org Cc: aruna.ramakrishna(a)oracle.com Cc: catalin.marinas(a)arm.com Cc: dave.hansen(a)linux.intel.com Cc: joey.gouly(a)arm.com Cc: keith.lucas(a)oracle.com Cc: ryan.roberts(a)arm.com Cc: shuah(a)kernel.org Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-kselftest(a)vger.kernel.org Cc: x86(a)kernel.org --- Kevin Brodsky (14): selftests/mm: Fix condition in uffd_move_test_common() selftests/mm: Fix -Wmaybe-uninitialized warnings selftests/mm: Fix strncpy() length selftests/mm: Fix -Warray-bounds warnings in pkey_sighandler_tests selftests/mm: Build with -O2 selftests/mm: Remove unused pkey helpers selftests/mm: Define types using typedef in pkey-helpers.h selftests/mm: Ensure pkey-*.h define inline functions only selftests/mm: Remove empty pkey helper definition selftests/mm: Ensure non-global pkey symbols are marked static selftests/mm: Use sys_pkey helpers consistently selftests/mm: Rename pkey register macro selftests/mm: Skip pkey_sighandler_tests if support is missing selftests/mm: Remove X permission from sigaltstack mapping tools/testing/selftests/mm/Makefile | 6 +- tools/testing/selftests/mm/ksm_tests.c | 2 +- tools/testing/selftests/mm/mremap_test.c | 2 +- tools/testing/selftests/mm/pkey-arm64.h | 6 +- tools/testing/selftests/mm/pkey-helpers.h | 61 ++--- tools/testing/selftests/mm/pkey-powerpc.h | 4 +- tools/testing/selftests/mm/pkey-x86.h | 6 +- .../selftests/mm/pkey_sighandler_tests.c | 32 +-- tools/testing/selftests/mm/pkey_util.c | 40 ++++ tools/testing/selftests/mm/protection_keys.c | 212 +++++++----------- tools/testing/selftests/mm/soft-dirty.c | 2 +- tools/testing/selftests/mm/uffd-unit-tests.c | 4 +- .../testing/selftests/mm/write_to_hugetlbfs.c | 2 +- 13 files changed, 163 insertions(+), 216 deletions(-) create mode 100644 tools/testing/selftests/mm/pkey_util.c -- 2.47.0

10 months, 1 week

2
18
0 0

[PATCH v1] selftests/mm: static process_madvise() wrapper for guard-pages

by Ryan Roberts

The recently introduced guard-pages mm selftest uses the process_madvise() syscall, a wrapper for which was added to glibc v2.36. For those of us stuck with older distributions this causes a compile error when compiling the mm selftests. For example Ubuntu 22.04 uses glibc 2.35, which does not have the wrapper. To workaround the issue, let's introduce our own static process_madvise() wrapper that uses glibc's syscall() helper. While we are at it, add the guard-page test suite to run_vmtests.sh so that it can be automatically run by CI systems. Signed-off-by: Ryan Roberts <ryan.roberts(a)arm.com> --- Applies on top of mm-unstable (f349e79bfbf3) Thanks, Ryan tools/testing/selftests/mm/guard-pages.c | 10 ++++++++-- tools/testing/selftests/mm/run_vmtests.sh | 5 +++++ 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/mm/guard-pages.c b/tools/testing/selftests/mm/guard-pages.c index d8f8dee9ebbd..ece37212a8a2 100644 --- a/tools/testing/selftests/mm/guard-pages.c +++ b/tools/testing/selftests/mm/guard-pages.c @@ -55,6 +55,12 @@ static int pidfd_open(pid_t pid, unsigned int flags) return syscall(SYS_pidfd_open, pid, flags); } +static ssize_t sys_process_madvise(int pidfd, const struct iovec *iovec, + size_t n, int advice, unsigned int flags) +{ + return syscall(__NR_process_madvise, pidfd, iovec, n, advice, flags); +} + /* * Enable our signal catcher and try to read/write the specified buffer. The * return value indicates whether the read/write succeeds without a fatal @@ -419,7 +425,7 @@ TEST_F(guard_pages, process_madvise) ASSERT_EQ(munmap(&ptr_region[99 * page_size], page_size), 0); /* Now guard in one step. */ - count = process_madvise(pidfd, vec, 6, MADV_GUARD_INSTALL, 0); + count = sys_process_madvise(pidfd, vec, 6, MADV_GUARD_INSTALL, 0); /* OK we don't have permission to do this, skip. */ if (count == -1 && errno == EPERM) @@ -440,7 +446,7 @@ TEST_F(guard_pages, process_madvise) ASSERT_FALSE(try_read_write_buf(&ptr3[19 * page_size])); /* Now do the same with unguard... */ - count = process_madvise(pidfd, vec, 6, MADV_GUARD_REMOVE, 0); + count = sys_process_madvise(pidfd, vec, 6, MADV_GUARD_REMOVE, 0); /* ...and everything should now succeed. */ diff --git a/tools/testing/selftests/mm/run_vmtests.sh b/tools/testing/selftests/mm/run_vmtests.sh index 2fc290d9430c..00c3f07ea100 100755 --- a/tools/testing/selftests/mm/run_vmtests.sh +++ b/tools/testing/selftests/mm/run_vmtests.sh @@ -45,6 +45,8 @@ separated by spaces: vmalloc smoke tests - hmm hmm smoke tests +- madv_guard + test madvise(2) MADV_GUARD_INSTALL and MADV_GUARD_REMOVE options - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret @@ -375,6 +377,9 @@ CATEGORY="mremap" run_test ./mremap_dontunmap CATEGORY="hmm" run_test bash ./test_hmm.sh smoke +# MADV_GUARD_INSTALL and MADV_GUARD_REMOVE tests +CATEGORY="madv_guard" run_test ./guard-pages + # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests CATEGORY="madv_populate" run_test ./madv_populate -- 2.43.0

10 months, 1 week

2
2
0 0

[PATCH v2 0/2] update kselftest framework to check for required configs

by Siddharth Menon

Currently, kselftests does not have a generalised mechanism to skip compilation and run tests when required kernel configuration options are disabled. This patch series adresses this issue by checking whether all required configs from selftest/<test>/config are enabled in the current kernel Siddharth Menon (2): selftests: Introduce script to validate required configs selftests/lib.mk: Introduce check to validate required configs tools/testing/selftests/lib.mk | 11 ++- tools/testing/selftests/mktest.pl | 138 ++++++++++++++++++++++++++++++ 2 files changed, 147 insertions(+), 2 deletions(-) mode change 100644 => 100755 tools/testing/selftests/lib.mk create mode 100755 tools/testing/selftests/mktest.pl -- 2.39.5

10 months, 1 week

2
4
0 0

[PATCH net-next] selftests/net: packetdrill: report benign debug flakes as xfail

by Willem de Bruijn

From: Willem de Bruijn <willemb(a)google.com> A few recently added packetdrill tests that are known time sensitive (e.g., because testing timestamping) occasionally fail in debug mode: https://netdev.bots.linux.dev/contest.html?executor=vmksft-packetdrill-dbg These failures are well understood. Correctness of the tests is verified in non-debug mode. Continue running in debug mode also, to keep coverage with debug instrumentation. But, only in debug mode, mark these tests with well understood timing issues as XFAIL (known failing) rather than FAIL when failing. Introduce an allow list xfail_list with known cases. Expand the ktap infrastructure with XFAIL support. Fixes: eab35989cc37 ("selftests/net: packetdrill: import tcp/fast_recovery, tcp/nagle, tcp/timestamping") Reported-by: Jakub Kicinski <kuba(a)kernel.org> Closes: https://lore.kernel.org/netdev/20241218100013.0c698629@kernel.org/ Signed-off-by: Willem de Bruijn <willemb(a)google.com> --- .../selftests/kselftest/ktap_helpers.sh | 15 ++++++++++-- .../selftests/net/packetdrill/ksft_runner.sh | 23 +++++++++++++++---- 2 files changed, 31 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/kselftest/ktap_helpers.sh b/tools/testing/selftests/kselftest/ktap_helpers.sh index 79a125eb24c2..05a461890671 100644 --- a/tools/testing/selftests/kselftest/ktap_helpers.sh +++ b/tools/testing/selftests/kselftest/ktap_helpers.sh @@ -7,6 +7,7 @@ KTAP_TESTNO=1 KTAP_CNT_PASS=0 KTAP_CNT_FAIL=0 +KTAP_CNT_XFAIL=0 KTAP_CNT_SKIP=0 KSFT_PASS=0 @@ -69,6 +70,16 @@ ktap_test_skip() { KTAP_CNT_SKIP=$((KTAP_CNT_SKIP+1)) } +ktap_test_xfail() { + description="$1" + + result="ok" + directive="XFAIL" + __ktap_test "$result" "$description" "$directive" + + KTAP_CNT_XFAIL=$((KTAP_CNT_XFAIL+1)) +} + ktap_test_fail() { description="$1" @@ -99,7 +110,7 @@ ktap_exit_fail_msg() { ktap_finished() { ktap_print_totals - if [ $((KTAP_CNT_PASS + KTAP_CNT_SKIP)) -eq "$KSFT_NUM_TESTS" ]; then + if [ $((KTAP_CNT_PASS + KTAP_CNT_SKIP + KTAP_CNT_XFAIL)) -eq "$KSFT_NUM_TESTS" ]; then exit "$KSFT_PASS" else exit "$KSFT_FAIL" @@ -107,5 +118,5 @@ ktap_finished() { } ktap_print_totals() { - echo "# Totals: pass:$KTAP_CNT_PASS fail:$KTAP_CNT_FAIL xfail:0 xpass:0 skip:$KTAP_CNT_SKIP error:0" + echo "# Totals: pass:$KTAP_CNT_PASS fail:$KTAP_CNT_FAIL xfail:$KTAP_CNT_XFAIL xpass:0 skip:$KTAP_CNT_SKIP error:0" } diff --git a/tools/testing/selftests/net/packetdrill/ksft_runner.sh b/tools/testing/selftests/net/packetdrill/ksft_runner.sh index 4071c133f29e..ff989c325eef 100755 --- a/tools/testing/selftests/net/packetdrill/ksft_runner.sh +++ b/tools/testing/selftests/net/packetdrill/ksft_runner.sh @@ -23,7 +23,7 @@ if [ $# -ne 1 ]; then ktap_exit_fail_msg "usage: $0 <script>" exit "$KSFT_FAIL" fi -script="$1" +script="$(basename $1)" if [ -z "$(which packetdrill)" ]; then ktap_skip_all "packetdrill not found in PATH" @@ -31,16 +31,29 @@ if [ -z "$(which packetdrill)" ]; then fi declare -a optargs +failfunc=ktap_test_fail + if [[ -n "${KSFT_MACHINE_SLOW}" ]]; then optargs+=('--tolerance_usecs=14000') + + # xfail tests that are known flaky with dbg config, not fixable. + # still run them for coverage (and expect 100% pass without dbg). + declare -ar xfail_list=( + "tcp_fast_recovery_prr-ss.*.pkt" + "tcp_timestamping.*.pkt" + "tcp_user_timeout_user-timeout-probe.pkt" + "tcp_zerocopy_epoll_.*.pkt" + ) + readonly xfail_regex="^($(printf '%s|' "${xfail_list[@]}"))$" + [[ "$script" =~ ${xfail_regex} ]] && failfunc=ktap_test_xfail fi ktap_print_header ktap_set_plan 2 -unshare -n packetdrill ${ipv4_args[@]} ${optargs[@]} $(basename $script) > /dev/null \ - && ktap_test_pass "ipv4" || ktap_test_fail "ipv4" -unshare -n packetdrill ${ipv6_args[@]} ${optargs[@]} $(basename $script) > /dev/null \ - && ktap_test_pass "ipv6" || ktap_test_fail "ipv6" +unshare -n packetdrill ${ipv4_args[@]} ${optargs[@]} $script > /dev/null \ + && ktap_test_pass "ipv4" || $failfunc "ipv4" +unshare -n packetdrill ${ipv6_args[@]} ${optargs[@]} $script > /dev/null \ + && ktap_test_pass "ipv6" || $failfunc "ipv6" ktap_finished -- 2.47.1.613.gc27f4b7a9f-goog

10 months, 1 week

2
1
0 0

[PATCH v6 0/5] introduce PIDFD_SELF* sentinels

by Lorenzo Stoakes

If you wish to utilise a pidfd interface to refer to the current process or thread it is rather cumbersome, requiring something like: int pidfd = pidfd_open(getpid(), 0 or PIDFD_THREAD); ... close(pidfd); Or the equivalent call opening /proc/self. It is more convenient to use a sentinel value to indicate to an interface that accepts a pidfd that we simply wish to refer to the current process thread. This series introduces sentinels for this purposes which can be passed as the pidfd in this instance rather than having to establish a dummy fd for this purpose. It is useful to refer to both the current thread from the userland's perspective for which we use PIDFD_SELF, and the current process from the userland's perspective, for which we use PIDFD_SELF_PROCESS. There is unfortunately some confusion between the kernel and userland as to what constitutes a process - a thread from the userland perspective is a process in userland, and a userland process is a thread group (more specifically the thread group leader from the kernel perspective). We therefore alias things thusly: * PIDFD_SELF_THREAD aliased by PIDFD_SELF - use PIDTYPE_PID. * PIDFD_SELF_THREAD_GROUP alised by PIDFD_SELF_PROCESS - use PIDTYPE_TGID. In all of the kernel code we refer to PIDFD_SELF_THREAD and PIDFD_SELF_THREAD_GROUP. However we expect users to use PIDFD_SELF and PIDFD_SELF_PROCESS. This matters for cases where, for instance, a user unshare()'s FDs or does thread-specific signal handling and where the user would be hugely confused if the FDs referenced or signal processed referred to the thread group leader rather than the individual thread. We ensure that pidfd_send_signal() and pidfd_getfd() work correctly, and assert as much in selftests. All other interfaces except setns() will work implicitly with this new interface, however it doesn't make sense to test waitid(P_PIDFD, ...) as waiting on ourselves is a blocking operation. In the case of setns() we explicitly disallow use of PIDFD_SELF* as it doesn't make sense to obtain the namespaces of our own process, and it would require work to implement this functionality there that would be of no use. We also do not provide the ability to utilise PIDFD_SELF* in ordinary fd operations such as open() or poll(), as this would require extensive work and be of no real use. v6: * Avoid static inline in UAPI header as suggested by Pedro. * Place PIDFD_SELF values out of range of errors and any other sentinel as suggested by Pedro. v5: * Fixup self test dependencies on pidfd/pidfd.h. https://lore.kernel.org/linux-mm/cover.1729848252.git.lorenzo.stoakes@oracl… v4: * Avoid returning an fd in the __pidfd_get_pid() function as pointed out by Christian, instead simply always pin the pid and maintain fd scope in the helper alone. * Add wrapper header file in tools/include/linux to allow for import of UAPI pidfd.h header without encountering the collision between system fcntl.h and linux/fcntl.h as discussed with Shuah and John. * Fixup tests to import the UAPI pidfd.h header working around conflicts between system fcntl.h and linux/fcntl.h which the UAPI pidfd.h imports, as reported by Shuah. * Use an int for pidfd_is_self_sentinel() to avoid any dependency on stdbool.h in userland. https://lore.kernel.org/linux-mm/cover.1729198898.git.lorenzo.stoakes@oracl… v3: * Do not fput() an invalid fd as reported by kernel test bot. * Fix unintended churn from moving variable declaration. https://lore.kernel.org/linux-mm/cover.1729073310.git.lorenzo.stoakes@oracl… v2: * Fix tests as reported by Shuah. * Correct RFC version lore link. https://lore.kernel.org/linux-mm/cover.1728643714.git.lorenzo.stoakes@oracl… Non-RFC v1: * Removed RFC tag - there seems to be general consensus that this change is a good idea, but perhaps some debate to be had on implementation. It seems sensible then to move forward with the RFC flag removed. * Introduced PIDFD_SELF_THREAD, PIDFD_SELF_THREAD_GROUP and their aliases PIDFD_SELF and PIDFD_SELF_PROCESS respectively. * Updated testing accordingly. https://lore.kernel.org/linux-mm/cover.1728578231.git.lorenzo.stoakes@oracl… RFC version: https://lore.kernel.org/linux-mm/cover.1727644404.git.lorenzo.stoakes@oracl… Lorenzo Stoakes (5): pidfd: extend pidfd_get_pid() and de-duplicate pid lookup pidfd: add PIDFD_SELF_* sentinels to refer to own thread/process tools: testing: separate out wait_for_pid() into helper header selftests: pidfd: add pidfd.h UAPI wrapper selftests: pidfd: add tests for PIDFD_SELF_* include/linux/pid.h | 34 ++++- include/uapi/linux/pidfd.h | 10 ++ kernel/exit.c | 4 +- kernel/nsproxy.c | 1 + kernel/pid.c | 65 +++++--- kernel/signal.c | 29 +--- tools/include/linux/pidfd.h | 14 ++ tools/testing/selftests/cgroup/test_kill.c | 2 +- .../pid_namespace/regression_enomem.c | 2 +- tools/testing/selftests/pidfd/Makefile | 3 +- tools/testing/selftests/pidfd/pidfd.h | 28 +--- .../selftests/pidfd/pidfd_getfd_test.c | 141 ++++++++++++++++++ tools/testing/selftests/pidfd/pidfd_helpers.h | 39 +++++ .../selftests/pidfd/pidfd_setns_test.c | 11 ++ tools/testing/selftests/pidfd/pidfd_test.c | 76 ++++++++-- 15 files changed, 371 insertions(+), 88 deletions(-) create mode 100644 tools/include/linux/pidfd.h create mode 100644 tools/testing/selftests/pidfd/pidfd_helpers.h -- 2.47.0

10 months, 1 week

3
13
0 0

[PATCH v4 00/14] iommufd: Add vIOMMU infrastructure (Part-3: vEVENTQ)

by Nicolin Chen

As the vIOMMU infrastructure series part-3, this introduces a new vEVENTQ object. The existing FAULT object provides a nice notification pathway to the user space with a queue already, so let vEVENTQ reuse that. Mimicing the HWPT structure, add a common EVENTQ structure to support its derivatives: IOMMUFD_OBJ_FAULT (existing) and IOMMUFD_OBJ_VEVENTQ (new). An IOMMUFD_CMD_VEVENTQ_ALLOC is introduced to allocate vEVENTQ object for vIOMMUs. One vIOMMU can have multiple vEVENTQs in different types but can not support multiple vEVENTQs in the same type. The forwarding part is fairly simple but might need to replace a physical device ID with a virtual device ID in a driver-level event data structure. So, this also adds some helpers for drivers to use. As usual, this series comes with the selftest coverage for this new ioctl and with a real world use case in the ARM SMMUv3 driver. This is on Github: https://github.com/nicolinc/iommufd/commits/iommufd_veventq-v4 Testing with RMR patches for MSI: https://github.com/nicolinc/iommufd/commits/iommufd_veventq-v4-with-rmr Paring QEMU branch for testing: https://github.com/nicolinc/qemu/commits/wip/for_iommufd_veventq-v4 Changelog v4 * Rename "vIRQ" to "vEVENTQ" * Use flexible array in struct iommufd_vevent * Add the new ioctl command to union ucmd_buffer * Fix the alphabetical order in union ucmd_buffer too * Rename _TYPE_NONE to _TYPE_DEFAULT aligning with vIOMMU naming v3 https://lore.kernel.org/all/cover.1734477608.git.nicolinc@nvidia.com/ * Rebase on Will's for-joerg/arm-smmu/updates for arm_smmu_event series * Add "Reviewed-by" lines from Kevin * Fix typos in comments, kdocs, and jump tags * Add a patch to sort struct iommufd_ioctl_op * Update iommufd's userpsace-api documentation * Update uAPI kdoc to quote SMMUv3 offical spec * Drop the unused workqueue in struct iommufd_virq * Drop might_sleep() in iommufd_viommu_report_irq() helper * Add missing "break" in iommufd_viommu_get_vdev_id() helper * Shrink the scope of the vmaster's read lock in SMMUv3 driver * Pass in two arguments to iommufd_eventq_virq_handler() helper * Move "!ops || !ops->read" validation into iommufd_eventq_init() * Move "fault->ictx = ictx" closer to iommufd_ctx_get(fault->ictx) * Update commit message for arm_smmu_attach_prepare/commit_vmaster() * Keep "iommufd_fault" as-is and rename "iommufd_eventq_virq" to just "iommufd_virq" v2 https://lore.kernel.org/all/cover.1733263737.git.nicolinc@nvidia.com/ * Rebase on v6.13-rc1 * Add IOPF and vIRQ in iommufd.rst (userspace-api) * Add a proper locking in iommufd_event_virq_destroy * Add iommufd_event_virq_abort with a lockdep_assert_held * Rename "EVENT_*" to "EVENTQ_*" to describe the objects better * Reorganize flows in iommufd_eventq_virq_alloc for abort() to work * Adde struct arm_smmu_vmaster to store vSID upon attaching to a nested domain, calling a newly added iommufd_viommu_get_vdev_id helper * Adde an arm_vmaster_report_event helper in arm-smmu-v3-iommufd file to simplify the routine in arm_smmu_handle_evt() of the main driver v1 https://lore.kernel.org/all/cover.1724777091.git.nicolinc@nvidia.com/ Thanks! Nicolin Nicolin Chen (14): iommufd: Keep IOCTL list in an alphabetical order iommufd/fault: Add an iommufd_fault_init() helper iommufd/fault: Move iommufd_fault_iopf_handler() to header iommufd: Abstract an iommufd_eventq from iommufd_fault iommufd: Rename fault.c to eventq.c iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC iommufd/viommu: Add iommufd_viommu_get_vdev_id helper iommufd/viommu: Add iommufd_viommu_report_event helper iommufd/selftest: Require vdev_id when attaching to a nested domain iommufd/selftest: Add IOMMU_TEST_OP_TRIGGER_VEVENT for vEVENTQ coverage iommufd/selftest: Add IOMMU_VEVENTQ_ALLOC test coverage Documentation: userspace-api: iommufd: Update FAULT and VEVENTQ iommu/arm-smmu-v3: Introduce struct arm_smmu_vmaster iommu/arm-smmu-v3: Report events that belong to devices attached to vIOMMU drivers/iommu/iommufd/Makefile | 2 +- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 30 ++ drivers/iommu/iommufd/iommufd_private.h | 116 ++++++- drivers/iommu/iommufd/iommufd_test.h | 10 + include/linux/iommufd.h | 22 ++ include/uapi/linux/iommufd.h | 46 +++ tools/testing/selftests/iommu/iommufd_utils.h | 65 ++++ .../arm/arm-smmu-v3/arm-smmu-v3-iommufd.c | 65 ++++ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 90 ++++-- drivers/iommu/iommufd/driver.c | 60 ++++ drivers/iommu/iommufd/{fault.c => eventq.c} | 298 ++++++++++++++---- drivers/iommu/iommufd/hw_pagetable.c | 6 +- drivers/iommu/iommufd/main.c | 23 +- drivers/iommu/iommufd/selftest.c | 53 ++++ drivers/iommu/iommufd/viommu.c | 2 + tools/testing/selftests/iommu/iommufd.c | 27 ++ .../selftests/iommu/iommufd_fail_nth.c | 7 + Documentation/userspace-api/iommufd.rst | 16 + 18 files changed, 820 insertions(+), 118 deletions(-) rename drivers/iommu/iommufd/{fault.c => eventq.c} (55%) base-commit: e94dc6ddda8dd3770879a132d577accd2cce25f9 -- 2.43.0

10 months, 1 week

2
30
0 0

[PATCH] selftests/nolibc: start qemu with 1 GiB of memory

by Thomas Weißschuh

Recently the loongarch defconfig stopped working with the default 128 MiB of memory. The VM just spins infinitively. Increasing the available memory to 1 GiB, similar to s390, fixes the issue. To avoid having to do this for each architecture on its own, proactively apply to all architectures. Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- tools/testing/selftests/nolibc/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile index 8de98ea7af8071caa0597aa7b86d91a2d1d50e68..e92e0b88586111072a0e043cb15f3b59cf42c3a6 100644 --- a/tools/testing/selftests/nolibc/Makefile +++ b/tools/testing/selftests/nolibc/Makefile @@ -130,9 +130,9 @@ QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIB QEMU_ARGS_ppc64 = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_ppc64le = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_s390 = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS = $(QEMU_ARGS_$(XARCH)) $(QEMU_ARGS_BIOS) $(QEMU_ARGS_EXTRA) +QEMU_ARGS = -m 1G $(QEMU_ARGS_$(XARCH)) $(QEMU_ARGS_BIOS) $(QEMU_ARGS_EXTRA) # OUTPUT is only set when run from the main makefile, otherwise # it defaults to this nolibc directory. --- base-commit: 8cf0b93919e13d1e8d4466eb4080a4c4d9d66d7b change-id: 20241007-nolibc-qemu-mem-5ed605520472 Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

10 months, 1 week

3
2
0 0

[PATCH v2 0/8] mm/damon: remove DAMON debugfs interface

by SeongJae Park

DAMON debugfs interface was the only user interface of DAMON at the beginning[1]. However, it turned out the interface would be not good enough for long-term flexibility and stability. In Feb 2022[2], we therefore introduced DAMON sysfs interface as an alternative user interface that aims long-term flexibility and stability. With its introduction, DAMON debugfs interface has announced to be deprecated in near future. In Feb 2023[3], we announced the official deprecation of DAMON debugfs interface. In Jan 2024[4], we further made the deprecation difficult to be ignored. In Oct 2024[5], we posted an RFC version of this patch series as the last notice. And as of this writing, no problem or concerns about the removal plan have reported. Apparently users are already moved to the alternative, or made good plans for the change. Remove the DAMON debugfs interface code from the tree. Given the past timeline and the absence of reported problems or concerns, it is safe enough to be done. [1] https://lore.kernel.org/20210716081449.22187-1-sj38.park@gmail.com [2] https://lore.kernel.org/20220228081314.5770-1-sj@kernel.org [3] https://lore.kernel.org/20230209192009.7885-1-sj@kernel.org [4] https://lore.kernel.org/20240130013549.89538-1-sj@kernel.org [5] https://lore.kernel.org/20241015175412.60563-1-sj@kernel.org Revision History ---------------- Changes from v1 (https://lore.kernel.org/20250101213527.74203-1-sj@kernel.org) - Remove debugfs usage section and references from translations (https://lore.kernel.org/20250106183944.103569-1-sj@kernel.org) Changes from RFC (https://lore.kernel.org/20241015175412.60563-1-sj@kernel.org) - Rebased on latest mm-unstable - Update and wordsmith commit messages SeongJae Park (8): Docs/translations/*/admin-guide/mm/damon/usage: remove DAMON debugfs interface documentation Docs/admin-guide/mm/damon/usage: remove DAMON debugfs interface documentation Docs/mm/damon/design: update for removal of DAMON debugfs interface selftests/damon/config: remove configs for DAMON debugfs interface selftests selftests/damon: remove tests for DAMON debugfs interface kunit: configs: remove configs for DAMON debugfs interface tests mm/damon: remove DAMON debugfs interface kunit tests mm/damon: remove DAMON debugfs interface Documentation/admin-guide/mm/damon/usage.rst | 309 ----- Documentation/mm/damon/design.rst | 23 +- .../zh_CN/admin-guide/mm/damon/usage.rst | 248 +--- .../zh_TW/admin-guide/mm/damon/usage.rst | 248 +--- mm/damon/Kconfig | 30 - mm/damon/Makefile | 1 - mm/damon/dbgfs.c | 1148 ----------------- mm/damon/tests/.kunitconfig | 7 - mm/damon/tests/dbgfs-kunit.h | 173 --- tools/testing/kunit/configs/all_tests.config | 3 - tools/testing/selftests/damon/.gitignore | 3 - tools/testing/selftests/damon/Makefile | 11 +- tools/testing/selftests/damon/config | 1 - .../testing/selftests/damon/debugfs_attrs.sh | 17 - .../debugfs_duplicate_context_creation.sh | 27 - .../selftests/damon/debugfs_empty_targets.sh | 21 - .../damon/debugfs_huge_count_read_write.sh | 22 - .../damon/debugfs_rm_non_contexts.sh | 19 - .../selftests/damon/debugfs_schemes.sh | 19 - .../selftests/damon/debugfs_target_ids.sh | 19 - .../damon/debugfs_target_ids_pid_leak.c | 68 - .../damon/debugfs_target_ids_pid_leak.sh | 22 - ...fs_target_ids_read_before_terminate_race.c | 80 -- ...s_target_ids_read_before_terminate_race.sh | 14 - .../selftests/damon/huge_count_read_write.c | 46 - 25 files changed, 13 insertions(+), 2566 deletions(-) delete mode 100644 mm/damon/dbgfs.c delete mode 100644 mm/damon/tests/dbgfs-kunit.h delete mode 100755 tools/testing/selftests/damon/debugfs_attrs.sh delete mode 100755 tools/testing/selftests/damon/debugfs_duplicate_context_creation.sh delete mode 100755 tools/testing/selftests/damon/debugfs_empty_targets.sh delete mode 100755 tools/testing/selftests/damon/debugfs_huge_count_read_write.sh delete mode 100755 tools/testing/selftests/damon/debugfs_rm_non_contexts.sh delete mode 100755 tools/testing/selftests/damon/debugfs_schemes.sh delete mode 100755 tools/testing/selftests/damon/debugfs_target_ids.sh delete mode 100644 tools/testing/selftests/damon/debugfs_target_ids_pid_leak.c delete mode 100755 tools/testing/selftests/damon/debugfs_target_ids_pid_leak.sh delete mode 100644 tools/testing/selftests/damon/debugfs_target_ids_read_before_terminate_race.c delete mode 100755 tools/testing/selftests/damon/debugfs_target_ids_read_before_terminate_race.sh delete mode 100644 tools/testing/selftests/damon/huge_count_read_write.c -- 2.39.5

10 months, 1 week

1
4
0 0

[RFC PATCH 0/2] ptp: add PTP_SYS_OFFSET_STAT ioctl, support it in virtio_rtc

by Peter Hilber

This RFC patch series proposes a new ioctl PTP_SYS_OFFSET_STAT and adds support for it in the proposed virtio_rtc driver [1]. The new PTP_SYS_OFFSET_STAT ioctl provides a cross-timestamp like PTP_SYS_OFFSET_PRECISE2, plus any the following status information (for now): - for UTC timescale clocks: leap second related status, - clock accuracy. The second commit adds support for the ioctl in the proposed virtio_rtc driver, and hence depends on the patch series "Add virtio_rtc module" [1]. [1] https://lore.kernel.org/lkml/20241219201118.2233-1-quic_philber@quicinc.com… Signed-off-by: Peter Hilber <quic_philber(a)quicinc.com> Peter Hilber (2): ptp: add PTP_SYS_OFFSET_STAT for xtstamping with status virtio_rtc: Support PTP_SYS_OFFSET_STAT ioctl drivers/ptp/ptp_chardev.c | 39 ++++++++ drivers/ptp/ptp_clock.c | 9 ++ drivers/virtio/Kconfig | 4 +- drivers/virtio/virtio_rtc_driver.c | 122 +++++++++++++++++++++++- drivers/virtio/virtio_rtc_internal.h | 3 +- drivers/virtio/virtio_rtc_ptp.c | 25 +++-- include/linux/ptp_clock_kernel.h | 31 ++++++ include/uapi/linux/ptp_clock.h | 130 +++++++++++++++++++++++++- tools/testing/selftests/ptp/Makefile | 2 +- tools/testing/selftests/ptp/testptp.c | 126 ++++++++++++++++++++++++- 10 files changed, 471 insertions(+), 20 deletions(-) base-commit: 8a8009abbfa04e58f1b01b20534cac9e8fe61a46 -- 2.43.0

10 months, 1 week

2
8
0 0

[PATCH net-next] selftests: drv-net: test drivers sleeping in ndo_get_stats64

by Jakub Kicinski

Most of our tests use rtnetlink to read device stats, so they don't expose the drivers much to paths in which device stats are read under RCU. Add tests which hammer profcs reads to make sure drivers: - don't sleep while reporting stats, - can handle parallel reads, - can handle device going down while reading. Set ifname on the env class in NetDrvEnv, we already do that in NetDrvEpEnv. KTAP version 1 1..7 ok 1 stats.check_pause ok 2 stats.check_fec ok 3 stats.pkt_byte_sum ok 4 stats.qstat_by_ifindex ok 5 stats.check_down ok 6 stats.procfs_hammer # completed up/down cycles: 6 ok 7 stats.procfs_downup_hammer # Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: willemb(a)google.com CC: petrm(a)nvidia.com CC: linux-kselftest(a)vger.kernel.org --- .../selftests/drivers/net/lib/py/env.py | 1 + tools/testing/selftests/drivers/net/stats.py | 94 ++++++++++++++++++- tools/testing/selftests/net/lib/py/ksft.py | 5 + 3 files changed, 97 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py index fea343f209ea..987e452d3a45 100644 --- a/tools/testing/selftests/drivers/net/lib/py/env.py +++ b/tools/testing/selftests/drivers/net/lib/py/env.py @@ -48,6 +48,7 @@ from .remote import Remote else: self._ns = NetdevSimDev(**kwargs) self.dev = self._ns.nsims[0].dev + self.ifname = self.dev['ifname'] self.ifindex = self.dev['ifindex'] def __enter__(self): diff --git a/tools/testing/selftests/drivers/net/stats.py b/tools/testing/selftests/drivers/net/stats.py index 031ac9def6c0..55d647c006ed 100755 --- a/tools/testing/selftests/drivers/net/stats.py +++ b/tools/testing/selftests/drivers/net/stats.py @@ -2,12 +2,15 @@ # SPDX-License-Identifier: GPL-2.0 import errno +import subprocess +import time from lib.py import ksft_run, ksft_exit, ksft_pr -from lib.py import ksft_ge, ksft_eq, ksft_in, ksft_true, ksft_raises, KsftSkipEx, KsftXfailEx +from lib.py import ksft_ge, ksft_eq, ksft_is, ksft_in, ksft_lt, ksft_true, ksft_raises +from lib.py import KsftSkipEx, KsftXfailEx from lib.py import ksft_disruptive from lib.py import EthtoolFamily, NetdevFamily, RtnlFamily, NlError from lib.py import NetDrvEnv -from lib.py import ip, defer +from lib.py import cmd, ip, defer ethnl = EthtoolFamily() netfam = NetdevFamily() @@ -174,10 +177,95 @@ rtnl = RtnlFamily() netfam.qstats_get({"ifindex": cfg.ifindex, "scope": "queue"}, dump=True) +def __run_inf_loop(body): + body = body.strip() + if body[-1] != ';': + body += ';' + + return subprocess.Popen(f"while true; do {body} done", shell=True, + stdout=subprocess.PIPE, stderr=subprocess.PIPE) + + +def __stats_increase_sanely(old, new) -> None: + for k in old.keys(): + ksft_ge(new[k], old[k]) + ksft_lt(new[k] - old[k], 1 << 31, comment="likely wrapping error") + + +def procfs_hammer(cfg) -> None: + """ + Reading stats via procfs only holds the RCU lock, which is not an exclusive + lock, make sure drivers can handle parallel reads of stats. + """ + one = __run_inf_loop("cat /proc/net/dev") + defer(one.kill) + two = __run_inf_loop("cat /proc/net/dev") + defer(two.kill) + + time.sleep(1) + # Make sure the processes are running + ksft_is(one.poll(), None) + ksft_is(two.poll(), None) + + rtstat1 = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64'] + time.sleep(2) + rtstat2 = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64'] + __stats_increase_sanely(rtstat1, rtstat2) + # defers will kill the loops + + +@ksft_disruptive +def procfs_downup_hammer(cfg) -> None: + """ + Reading stats via procfs only holds the RCU lock, drivers often try + to sleep when reading the stats, or don't protect against races. + """ + # Max out the queues, we'll flip between max an 1 + channels = ethnl.channels_get({'header': {'dev-index': cfg.ifindex}}) + if channels['combined-count'] == 0: + rx_type = 'rx' + else: + rx_type = 'combined' + cur_queue_cnt = channels[f'{rx_type}-count'] + max_queue_cnt = channels[f'{rx_type}-max'] + + cmd(f"ethtool -L {cfg.ifname} {rx_type} {max_queue_cnt}") + defer(cmd, f"ethtool -L {cfg.ifname} {rx_type} {cur_queue_cnt}") + + # Real test stats + stats = __run_inf_loop("cat /proc/net/dev") + defer(stats.kill) + + ipset = f"ip link set dev {cfg.ifname}" + defer(ip, f"link set dev {cfg.ifname} up") + # The "echo -n 1" lets us count iterations below + updown = f"{ipset} down; sleep 0.05; {ipset} up; sleep 0.05; " + \ + f"ethtool -L {cfg.ifname} {rx_type} 1; " + \ + f"ethtool -L {cfg.ifname} {rx_type} {max_queue_cnt}; " + \ + "echo -n 1" + updown = __run_inf_loop(updown) + kill_updown = defer(updown.kill) + + time.sleep(1) + # Make sure the processes are running + ksft_is(stats.poll(), None) + ksft_is(updown.poll(), None) + + rtstat1 = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64'] + # We're looking for crashes, give it extra time + time.sleep(9) + rtstat2 = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64'] + __stats_increase_sanely(rtstat1, rtstat2) + + kill_updown.exec() + stdout, _ = updown.communicate(timeout=5) + ksft_pr("completed up/down cycles:", len(stdout.decode('utf-8'))) + + def main() -> None: with NetDrvEnv(__file__, queue_count=100) as cfg: ksft_run([check_pause, check_fec, pkt_byte_sum, qstat_by_ifindex, - check_down], + check_down, procfs_hammer, procfs_downup_hammer], args=(cfg, )) ksft_exit() diff --git a/tools/testing/selftests/net/lib/py/ksft.py b/tools/testing/selftests/net/lib/py/ksft.py index 477ae76de93d..3efe005436cd 100644 --- a/tools/testing/selftests/net/lib/py/ksft.py +++ b/tools/testing/selftests/net/lib/py/ksft.py @@ -71,6 +71,11 @@ KSFT_DISRUPTIVE = True _fail("Check failed", a, "not in", b, comment) +def ksft_is(a, b, comment=""): + if a is not b: + _fail("Check failed", a, "is not", b, comment) + + def ksft_ge(a, b, comment=""): if a < b: _fail("Check failed", a, "<", b, comment) -- 2.47.1

10 months, 1 week

3
3
0 0

[PATCH v3 00/14] iommufd: Add vIOMMU infrastructure (Part-3: vIRQ)

by Nicolin Chen

As the part-3 of the vIOMMU infrastructure, this series introduces a vIRQ object. The existing FAULT object provides a nice notification pathway to the user space already, so let vIRQ reuse the infrastructure. Mimicing the HWPT structure, add a common EVENTQ structure to support its derivatives: IOMMUFD_OBJ_FAULT (existing) and IOMMUFD_OBJ_VIRQ (new). IOMMUFD_CMD_VIRQ_ALLOC is introduced to allocate vIRQ objects for vIOMMUs. One vIOMMU can have multiple vIRQs in different types but can not support multiple vIRQs with the same types. The forwarding part is fairly simple but might need to replace a physical device ID with a virtual device ID in a driver-level IRQ data structure. So, this comes with some helpers for drivers to use. As usual, this series comes with the selftest coverage for this new vIRQ, and with a real world use case in the ARM SMMUv3 driver. This is on Github: https://github.com/nicolinc/iommufd/commits/iommufd_virq-v3 Testing with RMR patches for MSI: https://github.com/nicolinc/iommufd/commits/iommufd_virq-v3-with-rmr Paring QEMU branch for testing: https://github.com/nicolinc/qemu/commits/wip/for_iommufd_virq-v3 Changelog v3 * Rebase on Will's for-joerg/arm-smmu/updates for arm_smmu_event series * Add "Reviewed-by" lines from Kevin * Fix typos in comments, kdocs, and jump tags * Add a patch to sort struct iommufd_ioctl_op * Update iommufd's userpsace-api documentation * Update uAPI kdoc to quote SMMUv3 offical spec * Drop the unused workqueue in struct iommufd_virq * Drop might_sleep() in iommufd_viommu_report_irq() helper * Add missing "break" in iommufd_viommu_get_vdev_id() helper * Shrink the scope of the vmaster's read lock in SMMUv3 driver * Pass in two arguments to iommufd_eventq_virq_handler() helper * Move "!ops || !ops->read" validation into iommufd_eventq_init() * Move "fault->ictx = ictx" closer to iommufd_ctx_get(fault->ictx) * Update commit message for arm_smmu_attach_prepare/commit_vmaster() * Keep "iommufd_fault" as-is and rename "iommufd_eventq_virq" to just "iommufd_virq" v2 https://lore.kernel.org/all/cover.1733263737.git.nicolinc@nvidia.com/ * Rebase on v6.13-rc1 * Add IOPF and vIRQ in iommufd.rst (userspace-api) * Add a proper locking in iommufd_event_virq_destroy * Add iommufd_event_virq_abort with a lockdep_assert_held * Rename "EVENT_*" to "EVENTQ_*" to describe the objects better * Reorganize flows in iommufd_eventq_virq_alloc for abort() to work * Adde struct arm_smmu_vmaster to store vSID upon attaching to a nested domain, calling a newly added iommufd_viommu_get_vdev_id helper * Adde an arm_vmaster_report_event helper in arm-smmu-v3-iommufd file to simplify the routine in arm_smmu_handle_evt() of the main driver v1 https://lore.kernel.org/all/cover.1724777091.git.nicolinc@nvidia.com/ Thanks! Nicolin Nicolin Chen (14): iommufd: Keep IOCTL list in an alphabetical order iommufd/fault: Add an iommufd_fault_init() helper iommufd/fault: Move iommufd_fault_iopf_handler() to header iommufd: Abstract an iommufd_eventq from iommufd_fault iommufd: Rename fault.c to eventq.c iommufd: Add IOMMUFD_OBJ_VIRQ and IOMMUFD_CMD_VIRQ_ALLOC iommufd/viommu: Add iommufd_viommu_get_vdev_id helper iommufd/viommu: Add iommufd_viommu_report_irq helper iommufd/selftest: Require vdev_id when attaching to a nested domain iommufd/selftest: Add IOMMU_TEST_OP_TRIGGER_VIRQ for vIRQ coverage iommufd/selftest: Add IOMMU_VIRQ_ALLOC test coverage Documentation: userspace-api: iommufd: Update FAULT and VIRQ iommu/arm-smmu-v3: Introduce struct arm_smmu_vmaster iommu/arm-smmu-v3: Report IRQs that belong to devices attached to vIOMMU drivers/iommu/iommufd/Makefile | 2 +- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 30 ++ drivers/iommu/iommufd/iommufd_private.h | 115 ++++++- drivers/iommu/iommufd/iommufd_test.h | 10 + include/linux/iommufd.h | 20 ++ include/uapi/linux/iommufd.h | 46 +++ tools/testing/selftests/iommu/iommufd_utils.h | 63 ++++ .../arm/arm-smmu-v3/arm-smmu-v3-iommufd.c | 65 ++++ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 90 ++++-- drivers/iommu/iommufd/driver.c | 57 ++++ drivers/iommu/iommufd/{fault.c => eventq.c} | 298 ++++++++++++++---- drivers/iommu/iommufd/hw_pagetable.c | 6 +- drivers/iommu/iommufd/main.c | 20 +- drivers/iommu/iommufd/selftest.c | 53 ++++ drivers/iommu/iommufd/viommu.c | 2 + tools/testing/selftests/iommu/iommufd.c | 27 ++ .../selftests/iommu/iommufd_fail_nth.c | 6 + Documentation/userspace-api/iommufd.rst | 16 + 18 files changed, 809 insertions(+), 117 deletions(-) rename drivers/iommu/iommufd/{fault.c => eventq.c} (55%) base-commit: 376ce8b35ed15d5deee57bdecd8449f6a4df4c42 -- 2.43.0

10 months, 1 week

3
27
0 0

[PATCH AUTOSEL 6.12 1/8] selftests/sched_ext: fix build after renames in sched_ext API

by Sasha Levin

From: Ihor Solodrai <ihor.solodrai(a)pm.me> [ Upstream commit ef7009decc30eb2515a64253791d61b72229c119 ] The selftests are falining to build on current tip of bpf-next and sched_ext [1]. This has broken BPF CI [2] after merge from upstream. Use appropriate function names in the selftests according to the recent changes in the sched_ext API [3]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/commit/?id… [2] https://github.com/kernel-patches/bpf/actions/runs/11959327258/job/33340923… [3] https://lore.kernel.org/all/20241109194853.580310-1-tj@kernel.org/ Signed-off-by: Ihor Solodrai <ihor.solodrai(a)pm.me> Acked-by: Andrea Righi <arighi(a)nvidia.com> Acked-by: David Vernet <void(a)manifault.com> Signed-off-by: Tejun Heo <tj(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../testing/selftests/sched_ext/ddsp_bogus_dsq_fail.bpf.c | 2 +- .../selftests/sched_ext/ddsp_vtimelocal_fail.bpf.c | 4 ++-- tools/testing/selftests/sched_ext/dsp_local_on.bpf.c | 2 +- .../selftests/sched_ext/enq_select_cpu_fails.bpf.c | 2 +- tools/testing/selftests/sched_ext/exit.bpf.c | 4 ++-- tools/testing/selftests/sched_ext/maximal.bpf.c | 4 ++-- tools/testing/selftests/sched_ext/select_cpu_dfl.bpf.c | 2 +- .../selftests/sched_ext/select_cpu_dfl_nodispatch.bpf.c | 2 +- .../testing/selftests/sched_ext/select_cpu_dispatch.bpf.c | 2 +- .../selftests/sched_ext/select_cpu_dispatch_bad_dsq.bpf.c | 2 +- .../selftests/sched_ext/select_cpu_dispatch_dbl_dsp.bpf.c | 4 ++-- tools/testing/selftests/sched_ext/select_cpu_vtime.bpf.c | 8 ++++---- 12 files changed, 19 insertions(+), 19 deletions(-) diff --git a/tools/testing/selftests/sched_ext/ddsp_bogus_dsq_fail.bpf.c b/tools/testing/selftests/sched_ext/ddsp_bogus_dsq_fail.bpf.c index 37d9bf6fb745..6f4c3f5a1c5d 100644 --- a/tools/testing/selftests/sched_ext/ddsp_bogus_dsq_fail.bpf.c +++ b/tools/testing/selftests/sched_ext/ddsp_bogus_dsq_fail.bpf.c @@ -20,7 +20,7 @@ s32 BPF_STRUCT_OPS(ddsp_bogus_dsq_fail_select_cpu, struct task_struct *p, * If we dispatch to a bogus DSQ that will fall back to the * builtin global DSQ, we fail gracefully. */ - scx_bpf_dispatch_vtime(p, 0xcafef00d, SCX_SLICE_DFL, + scx_bpf_dsq_insert_vtime(p, 0xcafef00d, SCX_SLICE_DFL, p->scx.dsq_vtime, 0); return cpu; } diff --git a/tools/testing/selftests/sched_ext/ddsp_vtimelocal_fail.bpf.c b/tools/testing/selftests/sched_ext/ddsp_vtimelocal_fail.bpf.c index dffc97d9cdf1..e4a55027778f 100644 --- a/tools/testing/selftests/sched_ext/ddsp_vtimelocal_fail.bpf.c +++ b/tools/testing/selftests/sched_ext/ddsp_vtimelocal_fail.bpf.c @@ -17,8 +17,8 @@ s32 BPF_STRUCT_OPS(ddsp_vtimelocal_fail_select_cpu, struct task_struct *p, if (cpu >= 0) { /* Shouldn't be allowed to vtime dispatch to a builtin DSQ. */ - scx_bpf_dispatch_vtime(p, SCX_DSQ_LOCAL, SCX_SLICE_DFL, - p->scx.dsq_vtime, 0); + scx_bpf_dsq_insert_vtime(p, SCX_DSQ_LOCAL, SCX_SLICE_DFL, + p->scx.dsq_vtime, 0); return cpu; } diff --git a/tools/testing/selftests/sched_ext/dsp_local_on.bpf.c b/tools/testing/selftests/sched_ext/dsp_local_on.bpf.c index 6a7db1502c29..6325bf76f47e 100644 --- a/tools/testing/selftests/sched_ext/dsp_local_on.bpf.c +++ b/tools/testing/selftests/sched_ext/dsp_local_on.bpf.c @@ -45,7 +45,7 @@ void BPF_STRUCT_OPS(dsp_local_on_dispatch, s32 cpu, struct task_struct *prev) target = bpf_get_prandom_u32() % nr_cpus; - scx_bpf_dispatch(p, SCX_DSQ_LOCAL_ON | target, SCX_SLICE_DFL, 0); + scx_bpf_dsq_insert(p, SCX_DSQ_LOCAL_ON | target, SCX_SLICE_DFL, 0); bpf_task_release(p); } diff --git a/tools/testing/selftests/sched_ext/enq_select_cpu_fails.bpf.c b/tools/testing/selftests/sched_ext/enq_select_cpu_fails.bpf.c index 1efb50d61040..a7cf868d5e31 100644 --- a/tools/testing/selftests/sched_ext/enq_select_cpu_fails.bpf.c +++ b/tools/testing/selftests/sched_ext/enq_select_cpu_fails.bpf.c @@ -31,7 +31,7 @@ void BPF_STRUCT_OPS(enq_select_cpu_fails_enqueue, struct task_struct *p, /* Can only call from ops.select_cpu() */ scx_bpf_select_cpu_dfl(p, 0, 0, &found); - scx_bpf_dispatch(p, SCX_DSQ_GLOBAL, SCX_SLICE_DFL, enq_flags); + scx_bpf_dsq_insert(p, SCX_DSQ_GLOBAL, SCX_SLICE_DFL, enq_flags); } SEC(".struct_ops.link") diff --git a/tools/testing/selftests/sched_ext/exit.bpf.c b/tools/testing/selftests/sched_ext/exit.bpf.c index d75d4faf07f6..4bc36182d3ff 100644 --- a/tools/testing/selftests/sched_ext/exit.bpf.c +++ b/tools/testing/selftests/sched_ext/exit.bpf.c @@ -33,7 +33,7 @@ void BPF_STRUCT_OPS(exit_enqueue, struct task_struct *p, u64 enq_flags) if (exit_point == EXIT_ENQUEUE) EXIT_CLEANLY(); - scx_bpf_dispatch(p, DSQ_ID, SCX_SLICE_DFL, enq_flags); + scx_bpf_dsq_insert(p, DSQ_ID, SCX_SLICE_DFL, enq_flags); } void BPF_STRUCT_OPS(exit_dispatch, s32 cpu, struct task_struct *p) @@ -41,7 +41,7 @@ void BPF_STRUCT_OPS(exit_dispatch, s32 cpu, struct task_struct *p) if (exit_point == EXIT_DISPATCH) EXIT_CLEANLY(); - scx_bpf_consume(DSQ_ID); + scx_bpf_dsq_move_to_local(DSQ_ID); } void BPF_STRUCT_OPS(exit_enable, struct task_struct *p) diff --git a/tools/testing/selftests/sched_ext/maximal.bpf.c b/tools/testing/selftests/sched_ext/maximal.bpf.c index 4d4cd8d966db..4c005fa71810 100644 --- a/tools/testing/selftests/sched_ext/maximal.bpf.c +++ b/tools/testing/selftests/sched_ext/maximal.bpf.c @@ -20,7 +20,7 @@ s32 BPF_STRUCT_OPS(maximal_select_cpu, struct task_struct *p, s32 prev_cpu, void BPF_STRUCT_OPS(maximal_enqueue, struct task_struct *p, u64 enq_flags) { - scx_bpf_dispatch(p, SCX_DSQ_GLOBAL, SCX_SLICE_DFL, enq_flags); + scx_bpf_dsq_insert(p, SCX_DSQ_GLOBAL, SCX_SLICE_DFL, enq_flags); } void BPF_STRUCT_OPS(maximal_dequeue, struct task_struct *p, u64 deq_flags) @@ -28,7 +28,7 @@ void BPF_STRUCT_OPS(maximal_dequeue, struct task_struct *p, u64 deq_flags) void BPF_STRUCT_OPS(maximal_dispatch, s32 cpu, struct task_struct *prev) { - scx_bpf_consume(SCX_DSQ_GLOBAL); + scx_bpf_dsq_move_to_local(SCX_DSQ_GLOBAL); } void BPF_STRUCT_OPS(maximal_runnable, struct task_struct *p, u64 enq_flags) diff --git a/tools/testing/selftests/sched_ext/select_cpu_dfl.bpf.c b/tools/testing/selftests/sched_ext/select_cpu_dfl.bpf.c index f171ac470970..13d0f5be788d 100644 --- a/tools/testing/selftests/sched_ext/select_cpu_dfl.bpf.c +++ b/tools/testing/selftests/sched_ext/select_cpu_dfl.bpf.c @@ -30,7 +30,7 @@ void BPF_STRUCT_OPS(select_cpu_dfl_enqueue, struct task_struct *p, } scx_bpf_put_idle_cpumask(idle_mask); - scx_bpf_dispatch(p, SCX_DSQ_GLOBAL, SCX_SLICE_DFL, enq_flags); + scx_bpf_dsq_insert(p, SCX_DSQ_GLOBAL, SCX_SLICE_DFL, enq_flags); } SEC(".struct_ops.link") diff --git a/tools/testing/selftests/sched_ext/select_cpu_dfl_nodispatch.bpf.c b/tools/testing/selftests/sched_ext/select_cpu_dfl_nodispatch.bpf.c index 9efdbb7da928..815f1d5d61ac 100644 --- a/tools/testing/selftests/sched_ext/select_cpu_dfl_nodispatch.bpf.c +++ b/tools/testing/selftests/sched_ext/select_cpu_dfl_nodispatch.bpf.c @@ -67,7 +67,7 @@ void BPF_STRUCT_OPS(select_cpu_dfl_nodispatch_enqueue, struct task_struct *p, saw_local = true; } - scx_bpf_dispatch(p, dsq_id, SCX_SLICE_DFL, enq_flags); + scx_bpf_dsq_insert(p, dsq_id, SCX_SLICE_DFL, enq_flags); } s32 BPF_STRUCT_OPS(select_cpu_dfl_nodispatch_init_task, diff --git a/tools/testing/selftests/sched_ext/select_cpu_dispatch.bpf.c b/tools/testing/selftests/sched_ext/select_cpu_dispatch.bpf.c index 59bfc4f36167..4bb99699e920 100644 --- a/tools/testing/selftests/sched_ext/select_cpu_dispatch.bpf.c +++ b/tools/testing/selftests/sched_ext/select_cpu_dispatch.bpf.c @@ -29,7 +29,7 @@ s32 BPF_STRUCT_OPS(select_cpu_dispatch_select_cpu, struct task_struct *p, cpu = prev_cpu; dispatch: - scx_bpf_dispatch(p, dsq_id, SCX_SLICE_DFL, 0); + scx_bpf_dsq_insert(p, dsq_id, SCX_SLICE_DFL, 0); return cpu; } diff --git a/tools/testing/selftests/sched_ext/select_cpu_dispatch_bad_dsq.bpf.c b/tools/testing/selftests/sched_ext/select_cpu_dispatch_bad_dsq.bpf.c index 3bbd5fcdfb18..2a75de11b2cf 100644 --- a/tools/testing/selftests/sched_ext/select_cpu_dispatch_bad_dsq.bpf.c +++ b/tools/testing/selftests/sched_ext/select_cpu_dispatch_bad_dsq.bpf.c @@ -18,7 +18,7 @@ s32 BPF_STRUCT_OPS(select_cpu_dispatch_bad_dsq_select_cpu, struct task_struct *p s32 prev_cpu, u64 wake_flags) { /* Dispatching to a random DSQ should fail. */ - scx_bpf_dispatch(p, 0xcafef00d, SCX_SLICE_DFL, 0); + scx_bpf_dsq_insert(p, 0xcafef00d, SCX_SLICE_DFL, 0); return prev_cpu; } diff --git a/tools/testing/selftests/sched_ext/select_cpu_dispatch_dbl_dsp.bpf.c b/tools/testing/selftests/sched_ext/select_cpu_dispatch_dbl_dsp.bpf.c index 0fda57fe0ecf..99d075695c97 100644 --- a/tools/testing/selftests/sched_ext/select_cpu_dispatch_dbl_dsp.bpf.c +++ b/tools/testing/selftests/sched_ext/select_cpu_dispatch_dbl_dsp.bpf.c @@ -18,8 +18,8 @@ s32 BPF_STRUCT_OPS(select_cpu_dispatch_dbl_dsp_select_cpu, struct task_struct *p s32 prev_cpu, u64 wake_flags) { /* Dispatching twice in a row is disallowed. */ - scx_bpf_dispatch(p, SCX_DSQ_GLOBAL, SCX_SLICE_DFL, 0); - scx_bpf_dispatch(p, SCX_DSQ_GLOBAL, SCX_SLICE_DFL, 0); + scx_bpf_dsq_insert(p, SCX_DSQ_GLOBAL, SCX_SLICE_DFL, 0); + scx_bpf_dsq_insert(p, SCX_DSQ_GLOBAL, SCX_SLICE_DFL, 0); return prev_cpu; } diff --git a/tools/testing/selftests/sched_ext/select_cpu_vtime.bpf.c b/tools/testing/selftests/sched_ext/select_cpu_vtime.bpf.c index e6c67bcf5e6e..bfcb96cd4954 100644 --- a/tools/testing/selftests/sched_ext/select_cpu_vtime.bpf.c +++ b/tools/testing/selftests/sched_ext/select_cpu_vtime.bpf.c @@ -2,8 +2,8 @@ /* * A scheduler that validates that enqueue flags are properly stored and * applied at dispatch time when a task is directly dispatched from - * ops.select_cpu(). We validate this by using scx_bpf_dispatch_vtime(), and - * making the test a very basic vtime scheduler. + * ops.select_cpu(). We validate this by using scx_bpf_dsq_insert_vtime(), + * and making the test a very basic vtime scheduler. * * Copyright (c) 2024 Meta Platforms, Inc. and affiliates. * Copyright (c) 2024 David Vernet <dvernet(a)meta.com> @@ -47,13 +47,13 @@ s32 BPF_STRUCT_OPS(select_cpu_vtime_select_cpu, struct task_struct *p, cpu = prev_cpu; scx_bpf_test_and_clear_cpu_idle(cpu); ddsp: - scx_bpf_dispatch_vtime(p, VTIME_DSQ, SCX_SLICE_DFL, task_vtime(p), 0); + scx_bpf_dsq_insert_vtime(p, VTIME_DSQ, SCX_SLICE_DFL, task_vtime(p), 0); return cpu; } void BPF_STRUCT_OPS(select_cpu_vtime_dispatch, s32 cpu, struct task_struct *p) { - if (scx_bpf_consume(VTIME_DSQ)) + if (scx_bpf_dsq_move_to_local(VTIME_DSQ)) consumed = true; } -- 2.39.5

10 months, 1 week

1
2
0 0

[PATCH bpf-next v4 4/4] igc: Add launch time support to XDP ZC

by Song Yoong Siang

Enable Launch Time Control (LTC) support to XDP zero copy via XDP Tx metadata framework. This patch is tested with tools/testing/selftests/bpf/xdp_hw_metadata on Intel Tiger Lake platform. Below are the test steps and result. Test Steps: 1. Add mqprio qdisc: $ sudo tc qdisc add dev enp2s0 handle 8001: parent root mqprio num_tc 4 map 3 2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 queues 1@0 1@1 1@2 1@3 hw 0 2. Enable launch time hardware offload on hardware queue 1: $ sudo tc qdisc replace dev enp2s0 parent 8001:2 etf offload clockid CLOCK_TAI delta 500000 3. Change RSS to route all incoming IP packets into hardware queue 1: $ sudo ethtool -X enp2s0 start 1 equal 1 4. Start xdp_hw_metadata selftest application: $ sudo ./xdp_hw_metadata enp2s0 -l 1000000000 5. Send an UDP packet to port 9091 of DUT. $ echo -n xdp | nc -u -q0 169.254.1.1 9091 When launch time is set to 1s in the future, the delta between launch time and transmit hardware timestamp is equal to 0.016us, as shown in result below: 0x562ff5dc8880: rx_desc[4]->addr=84110 addr=84110 comp_addr=84110 EoP rx_hash: 0xE343384 with RSS type:0x1 HW RX-time: 1734578015467548904 (sec:1734578015.4675) delta to User RX-time sec:0.0002 (183.103 usec) XDP RX-time: 1734578015467651698 (sec:1734578015.4677) delta to User RX-time sec:0.0001 (80.309 usec) No rx_vlan_tci or rx_vlan_proto, err=-95 0x562ff5dc8880: ping-pong with csum=561c (want c7dd) csum_start=34 csum_offset=6 HW RX-time: 1734578015467548904 (sec:1734578015.4675) delta to HW Launch-time sec:1.0000 (1000000.000 usec) 0x562ff5dc8880: complete tx idx=4 addr=4018 HW Launch-time: 1734578016467548904 (sec:1734578016.4675) delta to HW TX-complete-time sec:0.0000 (0.016 usec) HW TX-complete-time: 1734578016467548920 (sec:1734578016.4675) delta to User TX-complete-time sec:0.0000 (32.546 usec) XDP RX-time: 1734578015467651698 (sec:1734578015.4677) delta to User TX-complete-time sec:0.9999 (999929.768 usec) HW RX-time: 1734578015467548904 (sec:1734578015.4675) delta to HW TX-complete-time sec:1.0000 (1000000.016 usec) 0x562ff5dc8880: complete rx idx=132 addr=84110 Signed-off-by: Song Yoong Siang <yoong.siang.song(a)intel.com> --- drivers/net/ethernet/intel/igc/igc_main.c | 78 ++++++++++++++++------- 1 file changed, 56 insertions(+), 22 deletions(-) diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 27872bdea9bd..6857f5f5b4b2 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -1566,6 +1566,26 @@ static bool igc_request_tx_tstamp(struct igc_adapter *adapter, struct sk_buff *s return false; } +static void igc_insert_empty_packet(struct igc_ring *tx_ring) +{ + struct igc_tx_buffer *empty_info; + struct sk_buff *empty; + void *data; + + empty_info = &tx_ring->tx_buffer_info[tx_ring->next_to_use]; + empty = alloc_skb(IGC_EMPTY_FRAME_SIZE, GFP_ATOMIC); + if (!empty) + return; + + data = skb_put(empty, IGC_EMPTY_FRAME_SIZE); + memset(data, 0, IGC_EMPTY_FRAME_SIZE); + + igc_tx_ctxtdesc(tx_ring, 0, false, 0, 0, 0); + + if (igc_init_tx_empty_descriptor(tx_ring, empty, empty_info) < 0) + dev_kfree_skb_any(empty); +} + static netdev_tx_t igc_xmit_frame_ring(struct sk_buff *skb, struct igc_ring *tx_ring) { @@ -1603,26 +1623,8 @@ static netdev_tx_t igc_xmit_frame_ring(struct sk_buff *skb, skb->tstamp = ktime_set(0, 0); launch_time = igc_tx_launchtime(tx_ring, txtime, &first_flag, &insert_empty); - if (insert_empty) { - struct igc_tx_buffer *empty_info; - struct sk_buff *empty; - void *data; - - empty_info = &tx_ring->tx_buffer_info[tx_ring->next_to_use]; - empty = alloc_skb(IGC_EMPTY_FRAME_SIZE, GFP_ATOMIC); - if (!empty) - goto done; - - data = skb_put(empty, IGC_EMPTY_FRAME_SIZE); - memset(data, 0, IGC_EMPTY_FRAME_SIZE); - - igc_tx_ctxtdesc(tx_ring, 0, false, 0, 0, 0); - - if (igc_init_tx_empty_descriptor(tx_ring, - empty, - empty_info) < 0) - dev_kfree_skb_any(empty); - } + if (insert_empty) + igc_insert_empty_packet(tx_ring); done: /* record the location of the first descriptor for this packet */ @@ -2955,9 +2957,33 @@ static u64 igc_xsk_fill_timestamp(void *_priv) return *(u64 *)_priv; } +static void igc_xsk_request_launch_time(u64 launch_time, void *_priv) +{ + struct igc_metadata_request *meta_req = _priv; + struct igc_ring *tx_ring = meta_req->tx_ring; + __le32 launch_time_offset; + bool insert_empty = false; + bool first_flag = false; + + if (!tx_ring->launchtime_enable) + return; + + launch_time_offset = igc_tx_launchtime(tx_ring, + ns_to_ktime(launch_time), + &first_flag, &insert_empty); + if (insert_empty) { + igc_insert_empty_packet(tx_ring); + meta_req->tx_buffer = + &tx_ring->tx_buffer_info[tx_ring->next_to_use]; + } + + igc_tx_ctxtdesc(tx_ring, launch_time_offset, first_flag, 0, 0, 0); +} + const struct xsk_tx_metadata_ops igc_xsk_tx_metadata_ops = { .tmo_request_timestamp = igc_xsk_request_timestamp, .tmo_fill_timestamp = igc_xsk_fill_timestamp, + .tmo_request_launch_time = igc_xsk_request_launch_time, }; static void igc_xdp_xmit_zc(struct igc_ring *ring) @@ -2980,7 +3006,7 @@ static void igc_xdp_xmit_zc(struct igc_ring *ring) ntu = ring->next_to_use; budget = igc_desc_unused(ring); - while (xsk_tx_peek_desc(pool, &xdp_desc) && budget--) { + while (xsk_tx_peek_desc(pool, &xdp_desc) && budget >= 4) { struct igc_metadata_request meta_req; struct xsk_tx_metadata *meta = NULL; struct igc_tx_buffer *bi; @@ -3004,6 +3030,12 @@ static void igc_xdp_xmit_zc(struct igc_ring *ring) xsk_tx_metadata_request(meta, &igc_xsk_tx_metadata_ops, &meta_req); + /* xsk_tx_metadata_request() may have updated next_to_use */ + ntu = ring->next_to_use; + + /* xsk_tx_metadata_request() may have updated Tx buffer info */ + bi = meta_req.tx_buffer; + tx_desc = IGC_TX_DESC(ring, ntu); tx_desc->read.cmd_type_len = cpu_to_le32(meta_req.cmd_type); tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); @@ -3021,9 +3053,11 @@ static void igc_xdp_xmit_zc(struct igc_ring *ring) ntu++; if (ntu == ring->count) ntu = 0; + + ring->next_to_use = ntu; + budget = igc_desc_unused(ring); } - ring->next_to_use = ntu; if (tx_desc) { igc_flush_tx_descriptors(ring); xsk_tx_release(pool); -- 2.34.1

10 months, 1 week

1
0
0 0

[PATCH bpf-next v4 0/4] xsk: TX metadata Launch Time support

by Song Yoong Siang

This series expands the XDP TX metadata framework to allow user applications to pass per packet 64-bit launch time directly to the kernel driver, requesting launch time hardware offload support. The XDP TX metadata framework will not perform any clock conversion or packet reordering. Please note that the role of Tx metadata is just to pass the launch time, not to enable the offload feature. Users will need to enable the launch time hardware offload feature of the device by using the respective command, such as the tc-etf command. Although some devices use the tc-etf command to enable their launch time hardware offload feature, xsk packets will not go through the etf qdisc. Therefore, in my opinion, the launch time should always be based on the PTP Hardware Clock (PHC). Thus, i did not include a clock ID to indicate the clock source. To simplify the test steps, I modified the xdp_hw_metadata bpf self-test tool in such a way that it will set the launch time based on the offset provided by the user and the value of the Receive Hardware Timestamp, which is against the PHC. This will eliminate the need to discipline System Clock with the PHC and then use clock_gettime() to get the time. Please note that AF_XDP lacks a feedback mechanism to inform the application if the requested launch time is invalid. So, users are expected to familiar with the horizon of the launch time of the device they use and not request a launch time that is beyond the horizon. Otherwise, the driver might interpret the launch time incorrectly and react wrongly. For stmmac and igc, where modulo computation is used, a launch time larger than the horizon will cause the device to transmit the packet earlier that the requested launch time. Although there is no feedback mechanism for the launch time request for now, user still can check whether the requested launch time is working or not, by requesting the Transmit Completion Hardware Timestamp. Changes since v1: - renamed to use Earliest TxTime First (Willem) - renamed to use txtime (Willem) Changes since v2: - renamed to use launch time (Jesper & Willem) - changed the default launch time in xdp_hw_metadata apps from 1s to 0.1s because some NICs do not support such a large future time. Changes since v3: - added XDP launch time support to the igc driver (Jesper & Florian) - added per-driver launch time limitation on xsk-tx-metadata.rst (Jesper) - added explanation on FIFO behavior on xsk-tx-metadata.rst (Jakub) - added step to enable launch time in the commit message (Jesper & Willem) - explicitly documented the type of launch_time and which clock source it is against (Willem) v1: https://patchwork.kernel.org/project/netdevbpf/cover/20231130162028.852006-… v2: https://patchwork.kernel.org/project/netdevbpf/cover/20231201062421.1074768… v3: https://patchwork.kernel.org/project/netdevbpf/cover/20231203165129.1740512… Song Yoong Siang (4): xsk: Add launch time hardware offload support to XDP Tx metadata selftests/bpf: Add Launch Time request to xdp_hw_metadata net: stmmac: Add launch time support to XDP ZC igc: Add launch time support to XDP ZC Documentation/netlink/specs/netdev.yaml | 4 + Documentation/networking/xsk-tx-metadata.rst | 64 +++++++++++++++ drivers/net/ethernet/intel/igc/igc_main.c | 78 +++++++++++++------ drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 + .../net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++++ include/net/xdp_sock.h | 10 +++ include/net/xdp_sock_drv.h | 1 + include/uapi/linux/if_xdp.h | 10 +++ include/uapi/linux/netdev.h | 3 + net/core/netdev-genl.c | 2 + net/xdp/xsk.c | 3 + tools/include/uapi/linux/if_xdp.h | 10 +++ tools/include/uapi/linux/netdev.h | 3 + tools/testing/selftests/bpf/xdp_hw_metadata.c | 30 ++++++- 14 files changed, 208 insertions(+), 25 deletions(-) -- 2.34.1

10 months, 1 week

1
0
0 0

rust/kernel/lib.rs:17:12 : warning: the feature `new_uninit` has been stable since 1.82.0 and no longer requires an attribute to enable

by Naresh Kamboju

The following kselftest rust builds failed on sashal/linus-next.git due to following build warnings / errors. Good: 829d8581c398a96deea1d6bc78578950347dcbec Bad: b2d472701a703596889c3fd067fd8929aeffc4be Build error: -------------- warning: the feature `new_uninit` has been stable since 1.82.0 and no longer requires an attribute to enable --> /rust/kernel/lib.rs:17:12 | 17 | #![feature(new_uninit)] | ^^^^^^^^^^ | = note: `#[warn(stable_features)]` on by default error[E0658]: use of unstable library feature 'box_uninit_write' --> /rust/kernel/alloc/box_ext.rs:41:12 | 41 | Ok(Box::write(b, x)) | ^^^^^^^^^^ | = note: see issue #129397 <https://github.com/rust-lang/rust/issues/129397> for more information = help: add `#![feature(box_uninit_write)]` to the crate attributes to enable = note: this compiler was built on 2024-11-26; consider upgrading it if it is out of date error: aborting due to 1 previous error; 1 warning emitted For more information about this error, try `rustc --explain E0658`. make[3]: *** [/rust/Makefile:425: rust/kernel.o] Error 1 Links: ------- - https://qa-reports.linaro.org/lkft/sashal-linus-next/build/v6.11-rc4-6237-g… - https://qa-reports.linaro.org/lkft/sashal-linus-next/build/v6.11-rc4-6237-g… - https://qa-reports.linaro.org/lkft/sashal-linus-next/build/v6.11-rc4-6237-g… metadata: ---- git repo: https://git.kernel.org/pub/scm/linux/kernel/git/sashal/linus-next.git kernel config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2rByIOiC9ssqI7NjEPY7… build url: https://storage.tuxsuite.com/public/linaro/lkft/builds/2rByIOiC9ssqI7NjEPY7… toolchain: rustgcc compiler: 'name': 'gcc', 'version': '14', 'version_full': 'gcc (Debian 14.2.0-8) 14.2.0' config: rustgcc-lkftconfig-kselftest arch: arm64 -- Linaro LKFT https://lkft.linaro.org

10 months, 1 week

3
4
0 0

[PATCH net] selftests: tc-testing: reduce rshift value

by Jakub Kicinski

After previous change rshift >= 32 is no longer allowed. Modify the test to use 31, the test doesn't seem to send any traffic so the exact value shouldn't matter. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: jhs(a)mojatatu.com CC: xiyou.wangcong(a)gmail.com CC: jiri(a)resnulli.us CC: shuah(a)kernel.org CC: karansanghvi98(a)gmail.com CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/tc-testing/tc-tests/filters/flow.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/flow.json b/tools/testing/selftests/tc-testing/tc-tests/filters/flow.json index 996448afe31b..91d120548bf5 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/filters/flow.json +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/flow.json @@ -78,10 +78,10 @@ "setup": [ "$TC qdisc add dev $DEV1 ingress" ], - "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 protocol ip flow map key dst rshift 0xff", + "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 protocol ip flow map key dst rshift 0x1f", "expExitCode": "0", "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 protocol ip prio 1 flow", - "matchPattern": "filter parent ffff: protocol ip pref 1 flow chain [0-9]+ handle 0x1 map keys dst rshift 255 baseclass", + "matchPattern": "filter parent ffff: protocol ip pref 1 flow chain [0-9]+ handle 0x1 map keys dst rshift 31 baseclass", "matchCount": "1", "teardown": [ "$TC qdisc del dev $DEV1 ingress" -- 2.47.1

10 months, 1 week

3
2
0 0

[PATCH v3 0/2] fix reading ESP during coredump

by Nam Cao

Hi, In /proc/PID/stat, there is the kstkesp field which is the stack pointer of a thread. While the thread is active, this field reads zero. But during a coredump, it should have a valid value. However, at the moment, kstkesp is zero even during coredump. The first commit fixes this problem, and the second commit adds a selftest to detect if this problem appears again in the future. v2..v3 https://lore.kernel.org/lkml/cover.1735550994.git.namcao@linutronix.de/ - Move stackdump file to local directory [Kees] - Always cleanup the stackdump file after the test [Kees] - Remove unused empty function v1..v2 https://lore.kernel.org/lkml/cover.1730883229.git.namcao@linutronix.de/ - Change the fix patch to use PF_POSTCOREDUMP [Oleg] Nam Cao (2): fs/proc: do_task_stat: Fix ESP not readable during coredump selftests: coredump: Add stackdump test fs/proc/array.c | 2 +- tools/testing/selftests/coredump/Makefile | 7 + tools/testing/selftests/coredump/README.rst | 50 ++++++ tools/testing/selftests/coredump/stackdump | 14 ++ .../selftests/coredump/stackdump_test.c | 151 ++++++++++++++++++ 5 files changed, 223 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/coredump/Makefile create mode 100644 tools/testing/selftests/coredump/README.rst create mode 100755 tools/testing/selftests/coredump/stackdump create mode 100644 tools/testing/selftests/coredump/stackdump_test.c -- 2.39.5

10 months, 1 week

2
3
0 0

[PATCH AUTOSEL 6.6 3/3] selftests/alsa: Fix circular dependency involving global-timer

by Sasha Levin

From: Li Zhijian <lizhijian(a)fujitsu.com> [ Upstream commit 55853cb829dc707427c3519f6b8686682a204368 ] The pattern rule `$(OUTPUT)/%: %.c` inadvertently included a circular dependency on the global-timer target due to its inclusion in $(TEST_GEN_PROGS_EXTENDED). This resulted in a circular dependency warning during the build process. To resolve this, the dependency on $(TEST_GEN_PROGS_EXTENDED) has been replaced with an explicit dependency on $(OUTPUT)/libatest.so. This change ensures that libatest.so is built before any other targets that require it, without creating a circular dependency. This fix addresses the following warning: make[4]: Entering directory 'tools/testing/selftests/alsa' make[4]: Circular default_modconfig/kselftest/alsa/global-timer <- default_modconfig/kselftest/alsa/global-timer dependency dropped. make[4]: Nothing to be done for 'all'. make[4]: Leaving directory 'tools/testing/selftests/alsa' Cc: Mark Brown <broonie(a)kernel.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: Shuah Khan <shuah(a)kernel.org> Signed-off-by: Li Zhijian <lizhijian(a)fujitsu.com> Link: https://patch.msgid.link/20241218025931.914164-1-lizhijian@fujitsu.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/alsa/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/alsa/Makefile b/tools/testing/selftests/alsa/Makefile index 5af9ba8a4645..140c7f821727 100644 --- a/tools/testing/selftests/alsa/Makefile +++ b/tools/testing/selftests/alsa/Makefile @@ -23,5 +23,5 @@ include ../lib.mk $(OUTPUT)/libatest.so: conf.c alsa-local.h $(CC) $(CFLAGS) -shared -fPIC $< $(LDLIBS) -o $@ -$(OUTPUT)/%: %.c $(TEST_GEN_PROGS_EXTENDED) alsa-local.h +$(OUTPUT)/%: %.c $(OUTPUT)/libatest.so alsa-local.h $(CC) $(CFLAGS) $< $(LDLIBS) -latest -o $@ -- 2.39.5

10 months, 1 week

1
0
0 0

[PATCH AUTOSEL 6.12 4/4] selftests/alsa: Fix circular dependency involving global-timer

by Sasha Levin

From: Li Zhijian <lizhijian(a)fujitsu.com> [ Upstream commit 55853cb829dc707427c3519f6b8686682a204368 ] The pattern rule `$(OUTPUT)/%: %.c` inadvertently included a circular dependency on the global-timer target due to its inclusion in $(TEST_GEN_PROGS_EXTENDED). This resulted in a circular dependency warning during the build process. To resolve this, the dependency on $(TEST_GEN_PROGS_EXTENDED) has been replaced with an explicit dependency on $(OUTPUT)/libatest.so. This change ensures that libatest.so is built before any other targets that require it, without creating a circular dependency. This fix addresses the following warning: make[4]: Entering directory 'tools/testing/selftests/alsa' make[4]: Circular default_modconfig/kselftest/alsa/global-timer <- default_modconfig/kselftest/alsa/global-timer dependency dropped. make[4]: Nothing to be done for 'all'. make[4]: Leaving directory 'tools/testing/selftests/alsa' Cc: Mark Brown <broonie(a)kernel.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: Shuah Khan <shuah(a)kernel.org> Signed-off-by: Li Zhijian <lizhijian(a)fujitsu.com> Link: https://patch.msgid.link/20241218025931.914164-1-lizhijian@fujitsu.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/alsa/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/alsa/Makefile b/tools/testing/selftests/alsa/Makefile index 944279160fed..8dab90ad22bb 100644 --- a/tools/testing/selftests/alsa/Makefile +++ b/tools/testing/selftests/alsa/Makefile @@ -27,5 +27,5 @@ include ../lib.mk $(OUTPUT)/libatest.so: conf.c alsa-local.h $(CC) $(CFLAGS) -shared -fPIC $< $(LDLIBS) -o $@ -$(OUTPUT)/%: %.c $(TEST_GEN_PROGS_EXTENDED) alsa-local.h +$(OUTPUT)/%: %.c $(OUTPUT)/libatest.so alsa-local.h $(CC) $(CFLAGS) $< $(LDLIBS) -latest -o $@ -- 2.39.5

10 months, 1 week

1
0
0 0

[PATCH v7 0/2] selftests: tmpfs: Add kselftest support

by Shivam Chaudhary

This version 7 patch series replace direct error handling methods with ksft macros, which provide better reporting.Currently, when the tmpfs test runs, it does not display any output if it passes,and if it fails (particularly when not run as root),it simply exits without any warning or message. This series of patch adds: 1. Add 'ksft_print_header()' and 'ksft_set_plan()' to structure test outputs more effectively. 2. skip if not run as root. 3. Replace direct error handling with 'ksft_test_result_*', macros for better reporting. v6->v7: - Improve the handling of failure macros. v6 v1: https://lore.kernel.org/all/20241219152929.4005003-2-cvam0000@gmail.com/ v6 v2: https://lore.kernel.org/all/20241219152929.4005003-3-cvam0000@gmail.com/ v5->v6: - Skip if not run as root. v5 v1: https://lore.kernel.org/all/20241112143056.565122-2-cvam0000@gmail.com/ v5 v2: https://lore.kernel.org/all/20241112143056.565122-3-cvam0000@gmail.com/ v4->v5: - Remove unnecessary pass messages. - Remove unnecessary use of KSFT_SKIP. - Add appropriate use of ksft_exit_fail_msg. v4 v1: https://lore.kernel.org/all/8db9feab-0600-440b-b4b2-042695a100b5@linuxfound… v4 v2: https://lore.kernel.org/all/63d5e3bb-9817-4a34-98fe-823a9cac7c16@linuxfound… v3->v4: - Start a patchset - Split patch into smaller patches to make it easy to review. Patch1 Replace 'ksft_test_result_skip' with 'KSFT_SKIP' during root run check. Patch2 Replace 'ksft_test_result_fail' with 'KSFT_SKIP' where fail does not make sense, or failure could be due to not unsupported APIs with appropriate warnings. v3: https://lore.kernel.org/all/20241028185756.111832-1-cvam0000@gmail.com/ v2->v3: - Remove extra ksft_set_plan() - Remove function for unshare() - Fix the comment style v2: https://lore.kernel.org/all/20241026191621.2860376-1-cvam0000@gmail.com/ v1->v2: - Make the commit message more clear. v1: https://lore.kernel.org/all/20241024200228.1075840-1-cvam0000@gmail.com/T/#u thanks Shivam Shivam Chaudhary (2): selftests: tmpfs: Add Test-skip if not run as root selftests: tmpfs: Add kselftest support to tmpfs .../selftests/tmpfs/bug-link-o-tmpfile.c | 40 ++++++++++++------- 1 file changed, 26 insertions(+), 14 deletions(-) -- 2.34.1

10 months, 1 week

2
6
0 0

[PATCH v5 0/3] rust: kunit: Support KUnit tests with a user-space like syntax

by David Gow

Hi all, v5 here is a small set of fixes and a rebase of the previous versions. If there are no major issues, I'd like to land this soon so it can be used and tested ready for 6.14. This series was originally written by José Expósito, and has been modified and updated by Matt Gilbride and myself. The original version can be found here: https://github.com/Rust-for-Linux/linux/pull/950 Add support for writing KUnit tests in Rust. While Rust doctests are already converted to KUnit tests and run, they're really better suited for examples, rather than as first-class unit tests. This series implements a series of direct Rust bindings for KUnit tests, as well as a new macro which allows KUnit tests to be written using a close variant of normal Rust unit test syntax. The only change required is replacing '#[cfg(test)]' with '#[kunit_tests(kunit_test_suite_name)]' An example test would look like: #[kunit_tests(rust_kernel_hid_driver)] mod tests { use super::*; use crate::{c_str, driver, hid, prelude::*}; use core::ptr; struct SimpleTestDriver; impl Driver for SimpleTestDriver { type Data = (); } #[test] fn rust_test_hid_driver_adapter() { let mut hid = bindings::hid_driver::default(); let name = c_str!("SimpleTestDriver"); static MODULE: ThisModule = unsafe { ThisModule::from_ptr(ptr::null_mut()) }; let res = unsafe { <hid::Adapter<SimpleTestDriver> as driver::DriverOps>::register(&mut hid, name, &MODULE) }; assert_eq!(res, Err(ENODEV)); // The mock returns -19 } } Please give this a go, and make sure I haven't broken it! There's almost certainly a lot of improvements which can be made -- and there's a fair case to be made for replacing some of this with generated C code which can use the C macros -- but this is hopefully an adequate implementation for now, and the interface can (with luck) remain the same even if the implementation changes. A few small notable missing features: - Attributes (like the speed of a test) are hardcoded to the default value. - Similarly, the module name attribute is hardcoded to NULL. In C, we use the KBUILD_MODNAME macro, but I couldn't find a way to use this from Rust which wasn't more ugly than just disabling it. - Assertions are not automatically rewritten to use KUnit assertions. --- Changes since v4: https://lore.kernel.org/linux-kselftest/20241101064505.3820737-1-davidgow@g… - Rebased against 6.13-rc1 - Allowed an unused_unsafe warning after the behaviour of addr_of_mut!() changed in Rust 1.82. (Thanks Boqun, Miguel) - "Expect" that the sample assert_eq!(1+1, 2) produces a clippy warning due to a redundant assertion. (Thanks Boqun, Miguel) - Fix some missing safety comments, and remove some unneeded 'unsafe' blocks. (Thanks Boqun) - Fix a couple of minor rustfmt issues which were triggering checkpatch warnings. Changes since v3: https://lore.kernel.org/linux-kselftest/20241030045719.3085147-2-davidgow@g… - The kunit_unsafe_test_suite!() macro now panic!s if the suite name is too long, triggering a compile error. (Thanks, Alice!) - The #[kunit_tests()] macro now preserves span information, so errors can be better reported. (Thanks, Boqun!) - The example tests have been updated to no longer use assert_eq!() with a constant bool argument (which triggered a clippy warning now we have the span info). Changes since v2: https://lore.kernel.org/linux-kselftest/20241029092422.2884505-1-davidgow@g… - Include missing rust/macros/kunit.rs file from v2. (Thanks Boqun!) - The kunit_unsafe_test_suite!() macro will truncate the name of the suite if it is too long. (Thanks Alice!) - The proc macro now emits an error if the suite name is too long. - We no longer needlessly use UnsafeCell<> in kunit_unsafe_test_suite!(). (Thanks Alice!) Changes since v1: https://lore.kernel.org/lkml/20230720-rustbind-v1-0-c80db349e3b5@google.com… - Rebase on top of the latest rust-next (commit 718c4069896c) - Make kunit_case a const fn, rather than a macro (Thanks Boqun) - As a result, the null terminator is now created with kernel::kunit::kunit_case_null() - Use the C kunit_get_current_test() function to implement in_kunit_test(), rather than re-implementing it (less efficiently) ourselves. Changes since the GitHub PR: - Rebased on top of kselftest/kunit - Add const_mut_refs feature This may conflict with https://lore.kernel.org/lkml/20230503090708.2524310-6-nmi@metaspace.dk/ - Add rust/macros/kunit.rs to the KUnit MAINTAINERS entry --- José Expósito (3): rust: kunit: add KUnit case and suite macros rust: macros: add macro to easily run KUnit tests rust: kunit: allow to know if we are in a test MAINTAINERS | 1 + rust/kernel/kunit.rs | 207 +++++++++++++++++++++++++++++++++++++++++++ rust/kernel/lib.rs | 1 + rust/macros/kunit.rs | 168 +++++++++++++++++++++++++++++++++++ rust/macros/lib.rs | 29 ++++++ 5 files changed, 406 insertions(+) create mode 100644 rust/macros/kunit.rs -- 2.47.1.613.gc27f4b7a9f-goog

10 months, 1 week

2
7
0 0

Question about test_xsk.sh

by Alexis Lothoré

Hello all, I was looking at other test candidates for conversion to bpf test_progs framework (to increase automatic testing scope) and found test_xsk.sh, which does not seem to have coverage yet in test_progs. This test validates the AF_XDP socket behavior with different XDP modes (SKB, DRV, zero copy) and socket configuration (normal, busy polling). The testing program looks pretty big, considering all files involved (test_xsk.sh, xskxceiver.c, xsk.c, the different XDP programs) and the matrix of tests it runs. So before really diving into it, I would like to ask: - is it indeed a good/relevant target for integration in test_progs (all tests look like functional tests, so I guess it is) ? - if so, is there anyone already working on this ? - multiple commits on xskxceiver.c hint that the program is also used for testing on real hardware, could someone confirm that it is still the case (similar need has been seen with test_xdp_features.sh for example) ? If so, it means that the current form must be preserved, and it would be an additional integration into test_progs rather a conversion (then most of the code should be shared between the non-test_progs and the test_progs version) Thanks, Alexis -- Alexis Lothoré, Bootlin Embedded Linux and Kernel engineering https://bootlin.com

10 months, 1 week

3
3
0 0

[PATCH net-next 0/4] netconsole: selftest for userdata overflow

by Breno Leitao

Implement comprehensive testing for netconsole userdata entry handling, demonstrating correct behavior when creating maximum entries and preventing unauthorized overflow. Refactor existing test infrastructure to support modular, reusable helper functions that validate strict entry limit enforcement. Also, add a warning if update_userdata() sees more than MAX_USERDATA_ITEMS entries. This shouldn't happen and it is a bug that shouldn't be silently ignored. Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Breno Leitao (4): netconsole: Warn if MAX_USERDATA_ITEMS limit is exceeded netconsole: selftest: Split the helpers from the selftest netconsole: selftest: Delete all userdata keys netconsole: selftest: verify userdata entry limit MAINTAINERS | 3 +- drivers/net/netconsole.c | 2 +- .../selftests/drivers/net/lib/sh/lib_netcons.sh | 225 +++++++++++++++++++++ .../testing/selftests/drivers/net/netcons_basic.sh | 218 +------------------- .../selftests/drivers/net/netcons_overflow.sh | 67 ++++++ 5 files changed, 296 insertions(+), 219 deletions(-) --- base-commit: bb18265c3aba92b91a1355609769f3e967b65dee change-id: 20241204-netcons_overflow_test-eaf735d1f743 Best regards, -- Breno Leitao <leitao(a)debian.org>

10 months, 2 weeks

2
9
0 0

[PATCH] selftests/ring-buffer: Add test for out-of-bound pgoff mapping

by Vincent Donnefort

Extend the ring-buffer mapping test coverage by checking an out-of-bound pgoff which has proven to be problematic in the past. Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Vincent Donnefort <vdonnefort(a)google.com> diff --git a/tools/testing/selftests/ring-buffer/map_test.c b/tools/testing/selftests/ring-buffer/map_test.c index d10a847130fb..a58f520f2f41 100644 --- a/tools/testing/selftests/ring-buffer/map_test.c +++ b/tools/testing/selftests/ring-buffer/map_test.c @@ -233,12 +233,18 @@ TEST_F(map, data_mmap) ASSERT_NE(data, MAP_FAILED); munmap(data, data_len); - /* Overflow the available subbufs by 1 */ + /* Offset within ring-buffer bounds, mapping size overflow */ meta_len += desc->meta->subbuf_size * 2; data = mmap(NULL, data_len, PROT_READ, MAP_SHARED, desc->cpu_fd, meta_len); ASSERT_EQ(data, MAP_FAILED); + /* Offset outside ring-buffer bounds */ + data_len = desc->meta->subbuf_size * desc->meta->nr_subbufs; + data = mmap(NULL, data_len, PROT_READ, MAP_SHARED, + desc->cpu_fd, data_len + (desc->meta->subbuf_size * 2)); + ASSERT_EQ(data, MAP_FAILED); + /* Verify meta-page padding */ if (desc->meta->meta_page_size > getpagesize()) { data_len = desc->meta->meta_page_size; base-commit: 61baee2dc5341c936e7fa7b1ca33c5607868de69 -- 2.47.1.613.gc27f4b7a9f-goog

10 months, 2 weeks

3
2
0 0

[PATCH 0/1] selftests/memfd: skip hugetlbfs test if it's not supported

by Po-Hsu Lin

Handle the case that hugetlbfs is not supported. To make it easier for debugging. On a system that does not support hugetlbfs. There will be no such HugePages_Free entry in /proc/meminfo. And consequently freepgs will be empty. The huge pages availability check will fail and the test will be started anyway: ./run_hugetlbfs_test.sh: line 47: [: -lt: unary operator expected ./run_hugetlbfs_test.sh: line 60: 12577 Aborted (core dumped) ./memfd_test hugetlbfs Aborted (core dumped) Po-Hsu Lin (1): selftests/memfd: skip hugetlbfs test if it's not supported tools/testing/selftests/memfd/run_hugetlbfs_test.sh | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) -- 2.34.1

10 months, 2 weeks

1
1
0 0

[PATCH 0/7] mm/damon: remove DAMON debugfs interface

by SeongJae Park

DAMON debugfs interface was the only user interface of DAMON at the beginning[1]. However, it turned out the interface would be not good enough for long-term flexibility and stability. In Feb 2022[2], we therefore introduced DAMON sysfs interface as an alternative user interface that aims long-term flexibility and stability. With its introduction, DAMON debugfs interface has announced to be deprecated in near future. In Feb 2023[3], we announced the official deprecation of DAMON debugfs interface. In Jan 2024[4], we further made the deprecation difficult to be ignored. In Oct 2024[5], we posted an RFC version of this patch series as the last notice. And as of this writing, no problem or concerns about the removal plan have reported. Apparently users are already moved to the alternative, or made good plans for the change. Remove the DAMON debugfs interface code from the tree. Given the past timeline and the absence of reported problems or concerns, it is safe enough to be done. [1] https://lore.kernel.org/20210716081449.22187-1-sj38.park@gmail.com [2] https://lore.kernel.org/20220228081314.5770-1-sj@kernel.org [3] https://lore.kernel.org/20230209192009.7885-1-sj@kernel.org [4] https://lore.kernel.org/20240130013549.89538-1-sj@kernel.org [5] https://lore.kernel.org/20241015175412.60563-1-sj@kernel.org Changes from RFC (https://lore.kernel.org/20241015175412.60563-1-sj@kernel.org) - Rebased on latest mm-unstable - Update and wordsmith commit messages SeongJae Park (7): Docs/admin-guide/mm/damon/usage: remove DAMON debugfs interface documentation Docs/mm/damon/design: update for removal of DAMON debugfs interface selftests/damon/config: remove configs for DAMON debugfs interface selftests selftests/damon: remove tests for DAMON debugfs interface kunit: configs: remove configs for DAMON debugfs interface tests mm/damon: remove DAMON debugfs interface kunit tests mm/damon: remove DAMON debugfs interface Documentation/admin-guide/mm/damon/usage.rst | 309 ----- Documentation/mm/damon/design.rst | 23 +- mm/damon/Kconfig | 30 - mm/damon/Makefile | 1 - mm/damon/dbgfs.c | 1148 ----------------- mm/damon/tests/.kunitconfig | 7 - mm/damon/tests/dbgfs-kunit.h | 173 --- tools/testing/kunit/configs/all_tests.config | 3 - tools/testing/selftests/damon/.gitignore | 3 - tools/testing/selftests/damon/Makefile | 11 +- tools/testing/selftests/damon/config | 1 - .../testing/selftests/damon/debugfs_attrs.sh | 17 - .../debugfs_duplicate_context_creation.sh | 27 - .../selftests/damon/debugfs_empty_targets.sh | 21 - .../damon/debugfs_huge_count_read_write.sh | 22 - .../damon/debugfs_rm_non_contexts.sh | 19 - .../selftests/damon/debugfs_schemes.sh | 19 - .../selftests/damon/debugfs_target_ids.sh | 19 - .../damon/debugfs_target_ids_pid_leak.c | 68 - .../damon/debugfs_target_ids_pid_leak.sh | 22 - ...fs_target_ids_read_before_terminate_race.c | 80 -- ...s_target_ids_read_before_terminate_race.sh | 14 - .../selftests/damon/huge_count_read_write.c | 46 - 23 files changed, 11 insertions(+), 2072 deletions(-) delete mode 100644 mm/damon/dbgfs.c delete mode 100644 mm/damon/tests/dbgfs-kunit.h delete mode 100755 tools/testing/selftests/damon/debugfs_attrs.sh delete mode 100755 tools/testing/selftests/damon/debugfs_duplicate_context_creation.sh delete mode 100755 tools/testing/selftests/damon/debugfs_empty_targets.sh delete mode 100755 tools/testing/selftests/damon/debugfs_huge_count_read_write.sh delete mode 100755 tools/testing/selftests/damon/debugfs_rm_non_contexts.sh delete mode 100755 tools/testing/selftests/damon/debugfs_schemes.sh delete mode 100755 tools/testing/selftests/damon/debugfs_target_ids.sh delete mode 100644 tools/testing/selftests/damon/debugfs_target_ids_pid_leak.c delete mode 100755 tools/testing/selftests/damon/debugfs_target_ids_pid_leak.sh delete mode 100644 tools/testing/selftests/damon/debugfs_target_ids_read_before_terminate_race.c delete mode 100755 tools/testing/selftests/damon/debugfs_target_ids_read_before_terminate_race.sh delete mode 100644 tools/testing/selftests/damon/huge_count_read_write.c -- 2.39.5

10 months, 2 weeks

1
4
0 0

[PATCH v2 1/3] selftest/powerpc/ptrace/core-pkey: Remove duplicate macros

by Madhavan Srinivasan

./powerpc/ptrace/Makefile includes flags.mk. In flags.mk, -I$(selfdir)/powerpc/include is always included as part of CFLAGS. So it will pick up the "pkeys.h" defined in powerpc/include. core-pkey.c test has couple of macros defined which are part of "pkeys.h" header file. Remove those duplicates and include "pkeys.h" Reviewed-by: Ritesh Harjani (IBM) <ritesh.list(a)gmail.com> Signed-off-by: Madhavan Srinivasan <maddy(a)linux.ibm.com> --- Changelog v1: - Added Reviewed-by tag - made changes to commit message .../selftests/powerpc/ptrace/core-pkey.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) diff --git a/tools/testing/selftests/powerpc/ptrace/core-pkey.c b/tools/testing/selftests/powerpc/ptrace/core-pkey.c index f6da4cb30cd6..31c9bf6d95db 100644 --- a/tools/testing/selftests/powerpc/ptrace/core-pkey.c +++ b/tools/testing/selftests/powerpc/ptrace/core-pkey.c @@ -16,14 +16,7 @@ #include <unistd.h> #include "ptrace.h" #include "child.h" - -#ifndef __NR_pkey_alloc -#define __NR_pkey_alloc 384 -#endif - -#ifndef __NR_pkey_free -#define __NR_pkey_free 385 -#endif +#include "pkeys.h" #ifndef NT_PPC_PKEY #define NT_PPC_PKEY 0x110 @@ -61,16 +54,6 @@ struct shared_info { time_t core_time; }; -static int sys_pkey_alloc(unsigned long flags, unsigned long init_access_rights) -{ - return syscall(__NR_pkey_alloc, flags, init_access_rights); -} - -static int sys_pkey_free(int pkey) -{ - return syscall(__NR_pkey_free, pkey); -} - static int increase_core_file_limit(void) { struct rlimit rlim; -- 2.47.0

10 months, 2 weeks

2
4
0 0

[PATCH bpf-next v4 0/2] bpf, verifier: Improve precision of BPF_MUL

by Matan Shachnai

Hi All, This patch-set aims to improve precision of BPF_MUL and add testcases to illustrate precision gains using signed and unsigned bounds. Thanks for taking the time to review and for all the feedback! Best, Matan Changes from v1: - Fixed typo made in patch. Changes from v2: - Added signed multiplication to BPF_MUL. - Added test cases to exercise BPF_MUL. - Reordered patches in the series. Changes from v3: - Coding style fixes. Matan Shachnai (2): bpf, verifier: Improve precision of BPF_MUL selftests/bpf: Add testcases for BPF_MUL kernel/bpf/verifier.c | 80 +++++------ .../selftests/bpf/progs/verifier_bounds.c | 134 ++++++++++++++++++ 2 files changed, 170 insertions(+), 44 deletions(-) -- 2.25.1

10 months, 2 weeks

2
3
0 0

[PATCH v2 0/2] fix reading ESP during coredump

by Nam Cao

Hi, In /proc/PID/stat, there is the kstkesp field which is the stack pointer of a thread. While the thread is active, this field reads zero. But during a coredump, it should have a valid value. However, at the moment, kstkesp is zero even during coredump. The first commit fixes this problem, and the second commit adds a selftest to detect if this problem appears again in the future. v2: - Change the fix patch to use PF_POSTCOREDUMP [Oleg] Link to v1: https://lore.kernel.org/lkml/cover.1730883229.git.namcao@linutronix.de/ Nam Cao (2): fs/proc: do_task_stat: Fix ESP not readable during coredump selftests: coredump: Add stackdump test fs/proc/array.c | 2 +- tools/testing/selftests/coredump/Makefile | 7 + tools/testing/selftests/coredump/README.rst | 50 ++++++ tools/testing/selftests/coredump/stackdump | 14 ++ .../selftests/coredump/stackdump_test.c | 154 ++++++++++++++++++ 5 files changed, 226 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/coredump/Makefile create mode 100644 tools/testing/selftests/coredump/README.rst create mode 100755 tools/testing/selftests/coredump/stackdump create mode 100644 tools/testing/selftests/coredump/stackdump_test.c -- 2.39.5

10 months, 2 weeks

2
4
0 0

[PATCH v4 0/4] Add support for the Idle HLT intercept feature

by Manali Shukla

The upcoming new Idle HLT Intercept feature allows for the HLT instruction execution by a vCPU to be intercepted by the hypervisor only if there are no pending V_INTR and V_NMI events for the vCPU. When the vCPU is expected to service the pending V_INTR and V_NMI events, the Idle HLT intercept won’t trigger. The feature allows the hypervisor to determine if the vCPU is actually idle and reduces wasteful VMEXITs. The idle HLT intercept feature is used for enlightened guests who wish to securely handle the events. When an enlightened guest does a HLT while an interrupt is pending, hypervisor will not have a way to figure out whether the guest needs to be re-entered or not. The Idle HLT intercept feature allows the HLT execution only if there are no pending V_INTR and V_NMI events. Presence of the Idle HLT Intercept feature is indicated via CPUID function Fn8000_000A_EDX[30]. Document for the Idle HLT intercept feature is available at [1]. This series is based on kvm-next/next (64dbb3a771a1) + [2]. Experiments done: ---------------- kvm_amd.avic is set to '0' for this experiment. The below numbers represent the average of 10 runs. Normal guest (L1) The below netperf command was run on the guest with smp = 1 (pinned). netperf -H <host ip> -t TCP_RR -l 60 ---------------------------------------------------------------- |with Idle HLT(transactions/Sec)|w/o Idle HLT(transactions/Sec)| ---------------------------------------------------------------- | 25645.7136 | 25773.2796 | ---------------------------------------------------------------- Number of transactions/sec with and without idle HLT intercept feature are almost same. Nested guest (L2) The below netperf command was run on L2 guest with smp = 1 (pinned). netperf -H <host ip> -t TCP_RR -l 60 ---------------------------------------------------------------- |with Idle HLT(transactions/Sec)|w/o Idle HLT(transactions/Sec)| ---------------------------------------------------------------- | 5655.4468 | 5755.2189 | ---------------------------------------------------------------- Number of transactions/sec with and without idle HLT intercept feature are almost same. Testing Done: - Tested the functionality for the Idle HLT intercept feature using selftest svm_idle_hlt_test. - Tested SEV and SEV-ES guest for the Idle HLT intercept functionality. - Tested the Idle HLT intercept functionality on nested guest. v3 -> v4 - Drop the patches to add vcpu_get_stat() into a new series [2]. - Added nested Idle HLT intercept support. v2 -> v3 - Incorporated Andrew's suggestion to structure vcpu_stat_types in a way that each architecture can share the generic types and also provide its own. v1 -> v2 - Done changes in svm_idle_hlt_test based on the review comments from Sean. - Added an enum based approach to get binary stats in vcpu_get_stat() which doesn't use string to get stat data based on the comments from Sean. - Added self_halt() and cli() helpers based on the comments from Sean. [1]: AMD64 Architecture Programmer's Manual Pub. 24593, April 2024, Vol 2, 15.9 Instruction Intercepts (Table 15-7: IDLE_HLT). https://bugzilla.kernel.org/attachment.cgi?id=306250 [2]: https://lore.kernel.org/kvm/20241021062226.108657-1-manali.shukla@amd.com/T… Manali Shukla (4): x86/cpufeatures: Add CPUID feature bit for Idle HLT intercept KVM: SVM: Add Idle HLT intercept support KVM: nSVM: implement the nested idle halt intercept KVM: selftests: KVM: SVM: Add Idle HLT intercept test arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/svm.h | 1 + arch/x86/include/uapi/asm/svm.h | 2 + arch/x86/kvm/governed_features.h | 1 + arch/x86/kvm/svm/nested.c | 7 ++ arch/x86/kvm/svm/svm.c | 15 +++- tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/include/x86_64/processor.h | 1 + .../selftests/kvm/x86_64/svm_idle_hlt_test.c | 89 +++++++++++++++++++ 9 files changed, 115 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/kvm/x86_64/svm_idle_hlt_test.c base-commit: c8d430db8eec7d4fd13a6bea27b7086a54eda6da prerequisite-patch-id: ca912571db5c004f77b70843b8dd35517ff1267f prerequisite-patch-id: 164ea3b4346f9e04bc69819278d20f5e1b5df5ed prerequisite-patch-id: 90d870f426ebc2cec43c0dd89b701ee998385455 prerequisite-patch-id: 45812b799c517a4521782a1fdbcda881237e1eda -- 2.34.1

10 months, 2 weeks

3
15
0 0

[PATCH v7 0/3] tracing: Support poll on event hist file

by Masami Hiramatsu (Google)

Hi, Here is the 7th version of the series to support polling on event 'hist' file. The previous version is here; https://lore.kernel.org/all/172907575534.470540.12941248697563459082.stgit@… This version updates descriptions, use guard() for mutex and fixes selftest problem. Background ---------- There has been interest in allowing user programs to monitor kernel events in real time. Ftrace provides `trace_pipe` interface to wait on events in the ring buffer, but it is needed to wait until filling up a page with events in the ring buffer. We can also peek the `trace` file periodically, but that is inefficient way to monitor a randomely happening event. Overview -------- This patch set allows user to `poll`(or `select`, `epoll`) on event histogram interface. As you know each event has its own `hist` file which shows histograms generated by trigger action. So user can set a new hist trigger on any event you want to monitor, and poll on the `hist` file until it is updated. There are 2 poll events are supported, POLLIN and POLLPRI. POLLIN means that there are any readable update on `hist` file and this event will be flashed only when you call read(). So, this is useful if you want to read the histogram periodically. The other POLLPRI event is for monitoring trace event. Like the POLLIN, this will be returned when the histogram is updated, but you don't need to read() the file and use poll() again. Note that this waits for histogram update (not event arrival), thus you must set a histogram on the event at first. Usage ----- Here is an example usage: ---- TRACEFS=/sys/kernel/tracing EVENT=$TRACEFS/events/sched/sched_process_free # setup histogram trigger and enable event echo "hist:key=comm" >> $EVENT/trigger echo 1 > $EVENT/enable # Wait for update poll pri $EVENT/hist # Event arrived. echo "process free event is comming" tail $TRACEFS/trace ---- The 'poll' command is in the selftest patch. You can take this series also from here; https://git.kernel.org/pub/scm/linux/kernel/git/mhiramat/linux.git/log/?h=t… Thank you, --- Masami Hiramatsu (Google) (3): tracing/hist: Add poll(POLLIN) support on hist file tracing/hist: Support POLLPRI event for poll on histogram selftests/tracing: Add hist poll() support test include/linux/trace_events.h | 14 +++ kernel/trace/trace_events.c | 14 +++ kernel/trace/trace_events_hist.c | 92 +++++++++++++++++++- tools/testing/selftests/ftrace/Makefile | 2 tools/testing/selftests/ftrace/poll.c | 74 ++++++++++++++++ .../ftrace/test.d/trigger/trigger-hist-poll.tc | 74 ++++++++++++++++ 6 files changed, 267 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/ftrace/poll.c create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/trigger-hist-poll.tc -- Masami Hiramatsu (Google) <mhiramat(a)kernel.org>

10 months, 2 weeks

2
5
0 0

[PATCH net-next 0/4] selftests/net: packetdrill: import multiple tests

by Soham Chakradeo

From: Soham Chakradeo <sohamch(a)google.com> Import tests for the following features (folder names in brackets): ECN (ecn) : RFC 3168 Close (close) : RFC 9293 TCP_INFO (tcp_info) : RFC 9293 Fast recovery (fast_recovery) : RFC 5681 Timestamping (timestamping) : RFC 1323 Nagle (nagle) : RFC 896 Selective Acknowledgments (sack) : RFC 2018 Recent Timestamp (ts_recent) : RFC 1323 Send file (sendfile) Syscall bad arg (syscall_bad_arg) Validate (validate) Blocking (blocking) Splice (splice) End of record (eor) Limited transmit (limited_transmit) Procedure to import and test the packetdrill tests into upstream linux is explained in the first patch of this series These tests have many authors. We only import them here from github.com/google/packetdrill. Thanks to the following authors fo their contributions over the years to these tests: Neal Cardwell, Shuo Chen, Yuchung Cheng, Jerry Chu, Eric Dumazet, Luke Hsiao, Priyaranjan Jha, Chonggang Li, Tanner Love, John Sperbeck, Wei Wang and Maciej Żenczykowski. For more info see the original github commits, such as https://github.com/google/packetdrill/commit/8229c94928ac. Signed-off-by: Willem de Bruijn <willemb(a)google.com> Signed-off-by: Soham Chakradeo <sohamch(a)google.com> Soham Chakradeo (4): selftests/net: packetdrill: import tcp/ecn , tcp/close , tcp/sack , tcp/tcp_info selftests/net: packetdrill: import tcp/fast_recovery , tcp/nagle , tcp/timestamping selftests/net: packetdrill: import tcp/eor , tcp/splice , tcp/ts_recent , tcp/blocking selftests/net: packetdrill: import tcp/user_timeout , tcp/validate , tcp/sendfile , tcp/limited-transmit , tcp/syscall_bad_arg .../tcp_blocking_blocking-accept.pkt | 18 +++ .../tcp_blocking_blocking-connect.pkt | 13 ++ .../tcp_blocking_blocking-read.pkt | 29 ++++ .../tcp_blocking_blocking-write.pkt | 35 +++++ ...lose_close-local-close-then-remote-fin.pkt | 23 +++ .../tcp_close_close-on-syn-sent.pkt | 21 +++ .../tcp_close_close-remote-fin-then-close.pkt | 36 +++++ .../net/packetdrill/tcp_ecn_ecn-uses-ect0.pkt | 21 +++ .../packetdrill/tcp_eor_no-coalesce-large.pkt | 38 +++++ .../tcp_eor_no-coalesce-retrans.pkt | 72 +++++++++ .../packetdrill/tcp_eor_no-coalesce-small.pkt | 36 +++++ .../tcp_eor_no-coalesce-subsequent.pkt | 66 ++++++++ .../tcp_fast_recovery_prr-ss-10pkt-lost-1.pkt | 72 +++++++++ ...t_recovery_prr-ss-30pkt-lost-1_4-11_16.pkt | 50 ++++++ ...tcp_fast_recovery_prr-ss-30pkt-lost1_4.pkt | 43 ++++++ ...ecovery_prr-ss-ack-below-snd_una-cubic.pkt | 41 +++++ ...ited_transmit_limited-transmit-no-sack.pkt | 53 +++++++ ...limited_transmit_limited-transmit-sack.pkt | 50 ++++++ .../packetdrill/tcp_nagle_https_client.pkt | 40 +++++ .../tcp_nagle_sendmsg_msg_more.pkt | 66 ++++++++ .../tcp_nagle_sockopt_cork_nodelay.pkt | 43 ++++++ .../tcp_sack_sack-route-refresh-ip-tos.pkt | 37 +++++ ...ack_sack-shift-sacked-2-6-8-3-9-nofack.pkt | 64 ++++++++ ..._sack_sack-shift-sacked-7-3-4-8-9-fack.pkt | 66 ++++++++ ..._sack_sack-shift-sacked-7-5-6-8-9-fack.pkt | 62 ++++++++ .../tcp_sendfile_sendfile-simple.pkt | 26 ++++ .../tcp_splice_tcp_splice_loop_test.pkt | 20 +++ ...scall_bad_arg_fastopen-invalid-buf-ptr.pkt | 42 +++++ .../tcp_syscall_bad_arg_sendmsg-empty-iov.pkt | 31 ++++ ...yscall_bad_arg_syscall-invalid-buf-ptr.pkt | 25 +++ .../tcp_tcp_info_tcp-info-last_data_recv.pkt | 21 +++ .../tcp_tcp_info_tcp-info-rwnd-limited.pkt | 54 +++++++ .../tcp_tcp_info_tcp-info-sndbuf-limited.pkt | 39 +++++ ...tcp_timestamping_client-only-last-byte.pkt | 92 +++++++++++ .../packetdrill/tcp_timestamping_partial.pkt | 91 +++++++++++ .../packetdrill/tcp_timestamping_server.pkt | 145 ++++++++++++++++++ .../packetdrill/tcp_ts_recent_fin_tsval.pkt | 23 +++ .../packetdrill/tcp_ts_recent_invalid_ack.pkt | 25 +++ .../packetdrill/tcp_ts_recent_reset_tsval.pkt | 25 +++ .../tcp_user_timeout_user-timeout-probe.pkt | 37 +++++ .../tcp_user_timeout_user_timeout.pkt | 33 ++++ ...validate_validate-established-no-flags.pkt | 24 +++ 42 files changed, 1848 insertions(+) create mode 100644 tools/testing/selftests/net/packetdrill/tcp_blocking_blocking-accept.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_blocking_blocking-connect.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_blocking_blocking-read.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_blocking_blocking-write.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_close_close-local-close-then-remote-fin.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_close_close-on-syn-sent.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_close_close-remote-fin-then-close.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_ecn_ecn-uses-ect0.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_eor_no-coalesce-large.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_eor_no-coalesce-retrans.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_eor_no-coalesce-small.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_eor_no-coalesce-subsequent.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_fast_recovery_prr-ss-10pkt-lost-1.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_fast_recovery_prr-ss-30pkt-lost-1_4-11_16.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_fast_recovery_prr-ss-30pkt-lost1_4.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_fast_recovery_prr-ss-ack-below-snd_una-cubic.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_limited_transmit_limited-transmit-no-sack.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_limited_transmit_limited-transmit-sack.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_nagle_https_client.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_nagle_sendmsg_msg_more.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_nagle_sockopt_cork_nodelay.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_sack_sack-route-refresh-ip-tos.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_sack_sack-shift-sacked-2-6-8-3-9-nofack.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_sack_sack-shift-sacked-7-3-4-8-9-fack.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_sack_sack-shift-sacked-7-5-6-8-9-fack.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_sendfile_sendfile-simple.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_splice_tcp_splice_loop_test.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_syscall_bad_arg_fastopen-invalid-buf-ptr.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_syscall_bad_arg_sendmsg-empty-iov.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_syscall_bad_arg_syscall-invalid-buf-ptr.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_tcp_info_tcp-info-last_data_recv.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_tcp_info_tcp-info-rwnd-limited.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_tcp_info_tcp-info-sndbuf-limited.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_timestamping_client-only-last-byte.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_timestamping_partial.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_timestamping_server.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_ts_recent_fin_tsval.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_ts_recent_invalid_ack.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_ts_recent_reset_tsval.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_user_timeout_user-timeout-probe.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_user_timeout_user_timeout.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_validate_validate-established-no-flags.pkt -- 2.47.0.338.g60cca15819-goog

10 months, 2 weeks

5
14
0 0

[PATCH v6 0/3] tracing: Support poll on event hist file

by Masami Hiramatsu (Google)

Hi, Here is the v6 patch to support polling on event 'hist' file. The previous version is here; https://lore.kernel.org/all/172398710447.295714.4489282566285719918.stgit@d… This version is rebased on the ftrace/for-next branch of the linux-trace tree, and use global irq_work and wq instead of per-event one. Background ---------- There has been interest in allowing user programs to monitor kernel events in real time. Ftrace provides `trace_pipe` interface to wait on events in the ring buffer, but it is needed to wait until filling up a page with events in the ring buffer. We can also peek the `trace` file periodically, but that is inefficient way to monitor a randomely happening event. Overview -------- This patch set allows user to `poll`(or `select`, `epoll`) on event histogram interface. As you know each event has its own `hist` file which shows histograms generated by trigger action. So user can set a new hist trigger on any event you want to monitor, and poll on the `hist` file until it is updated. There are 2 poll events are supported, POLLIN and POLLPRI. POLLIN means that there are any readable update on `hist` file and this event will be flashed only when you call read(). So, this is useful if you want to read the histogram periodically. The other POLLPRI event is for monitoring trace event. Like the POLLIN, this will be returned when the histogram is updated, but you don't need to read() the file and use poll() again. Note that this waits for histogram update (not event arrival), thus you must set a histogram on the event at first. Usage ----- Here is an example usage: ---- TRACEFS=/sys/kernel/tracing EVENT=$TRACEFS/events/sched/sched_process_free # setup histogram trigger and enable event echo "hist:key=comm" >> $EVENT/trigger echo 1 > $EVENT/enable # Wait for update poll pri $EVENT/hist # Event arrived. echo "process free event is comming" tail $TRACEFS/trace ---- The 'poll' command is in the selftest patch. You can take this series also from here; https://git.kernel.org/pub/scm/linux/kernel/git/mhiramat/linux.git/log/?h=t… Thank you, --- Masami Hiramatsu (Google) (3): tracing/hist: Add poll(POLLIN) support on hist file tracing/hist: Support POLLPRI event for poll on histogram selftests/tracing: Add hist poll() support test include/linux/trace_events.h | 14 +++ kernel/trace/trace_events.c | 14 +++ kernel/trace/trace_events_hist.c | 100 +++++++++++++++++++- tools/testing/selftests/ftrace/Makefile | 2 tools/testing/selftests/ftrace/poll.c | 74 +++++++++++++++ .../ftrace/test.d/trigger/trigger-hist-poll.tc | 74 +++++++++++++++ 6 files changed, 275 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/ftrace/poll.c create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/trigger-hist-poll.tc -- Masami Hiramatsu (Google) <mhiramat(a)kernel.org>

10 months, 3 weeks

3
9
0 0

[PATCH v2 0/2] riscv/ptrace: add new regset to access original a0 register

by Celeste Liu

The orig_a0 is missing in struct user_regs_struct of riscv, and there is no way to add it without breaking UAPI. (See Link tag below) Like NT_ARM_SYSTEM_CALL do, we add a new regset name NT_RISCV_ORIG_A0 to access original a0 register from userspace via ptrace API. Link: https://lore.kernel.org/all/59505464-c84a-403d-972f-d4b2055eeaac@gmail.com/ Signed-off-by: Celeste Liu <uwu(a)coelacanthus.name> --- Changes in v2: - Fix integer width. - Add selftest. - Link to v1: https://lore.kernel.org/r/20241201-riscv-new-regset-v1-1-c83c58abcc7b@coela… --- Celeste Liu (1): riscv/ptrace: add new regset to access original a0 register Charlie Jenkins (1): riscv: selftests: Add a ptrace test to verify syscall parameter modification arch/riscv/kernel/ptrace.c | 32 +++++++ include/uapi/linux/elf.h | 1 + tools/testing/selftests/riscv/abi/.gitignore | 1 + tools/testing/selftests/riscv/abi/Makefile | 5 +- tools/testing/selftests/riscv/abi/ptrace.c | 134 +++++++++++++++++++++++++++ 5 files changed, 172 insertions(+), 1 deletion(-) --- base-commit: 0e287d31b62bb53ad81d5e59778384a40f8b6f56 change-id: 20241201-riscv-new-regset-d529b952ad0d Best regards, -- Celeste Liu <uwu(a)coelacanthus.name>

10 months, 3 weeks

5
10
0 0

[PATCH v3 0/2] riscv/ptrace: add new regset to access original a0 register

by Celeste Liu

The orig_a0 is missing in struct user_regs_struct of riscv, and there is no way to add it without breaking UAPI. (See Link tag below) Like NT_ARM_SYSTEM_CALL do, we add a new regset name NT_RISCV_ORIG_A0 to access original a0 register from userspace via ptrace API. Link: https://lore.kernel.org/all/59505464-c84a-403d-972f-d4b2055eeaac@gmail.com/ Signed-off-by: Celeste Liu <uwu(a)coelacanthus.name> --- Changes in v3: - Use return 0 directly for readability. - Fix test for modify a0. - Add Fixes: tag - Remove useless Cc: stable. - Selftest will check both a0 and orig_a0, but depends on the correctness of PTRACE_GET_SYSCALL_INFO. - Link to v2: https://lore.kernel.org/r/20241203-riscv-new-regset-v2-0-d37da8c0cba6@coela… Changes in v2: - Fix integer width. - Add selftest. - Link to v1: https://lore.kernel.org/r/20241201-riscv-new-regset-v1-1-c83c58abcc7b@coela… --- Celeste Liu (2): riscv/ptrace: add new regset to access original a0 register riscv: selftests: Add a ptrace test to verify syscall parameter modification arch/riscv/kernel/ptrace.c | 32 ++++++ include/uapi/linux/elf.h | 1 + tools/testing/selftests/riscv/abi/.gitignore | 1 + tools/testing/selftests/riscv/abi/Makefile | 5 +- tools/testing/selftests/riscv/abi/ptrace.c | 151 +++++++++++++++++++++++++++ 5 files changed, 189 insertions(+), 1 deletion(-) --- base-commit: 0e287d31b62bb53ad81d5e59778384a40f8b6f56 change-id: 20241201-riscv-new-regset-d529b952ad0d Best regards, -- Celeste Liu <uwu(a)coelacanthus.name>

10 months, 3 weeks

1
3
0 0

[PATCH net-next] selftests: drv-net: assume stats refresh is 0 if no ethtool -c support

by Jakub Kicinski

Tests using HW stats wait for them to stabilize, using data from ethtool -c as the delay. Not all drivers implement ethtool -c so handle the errors gracefully. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: willemb(a)google.com CC: petrm(a)nvidia.com CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/drivers/net/lib/py/env.py | 9 +++++++-- tools/testing/selftests/net/lib/py/utils.py | 6 ++++-- 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py index 1ea9bb695e94..fea343f209ea 100644 --- a/tools/testing/selftests/drivers/net/lib/py/env.py +++ b/tools/testing/selftests/drivers/net/lib/py/env.py @@ -5,7 +5,7 @@ import time from pathlib import Path from lib.py import KsftSkipEx, KsftXfailEx from lib.py import ksft_setup -from lib.py import cmd, ethtool, ip +from lib.py import cmd, ethtool, ip, CmdExitFailure from lib.py import NetNS, NetdevSimDev from .remote import Remote @@ -234,7 +234,12 @@ from .remote import Remote Good drivers will tell us via ethtool what their sync period is. """ if self._stats_settle_time is None: - data = ethtool("-c " + self.ifname, json=True)[0] + data = {} + try: + data = ethtool("-c " + self.ifname, json=True)[0] + except CmdExitFailure as e: + if "Operation not supported" not in e.cmd.stderr: + raise self._stats_settle_time = 0.025 + \ data.get('stats-block-usecs', 0) / 1000 / 1000 diff --git a/tools/testing/selftests/net/lib/py/utils.py b/tools/testing/selftests/net/lib/py/utils.py index 72590c3f90f1..9e3bcddcf3e8 100644 --- a/tools/testing/selftests/net/lib/py/utils.py +++ b/tools/testing/selftests/net/lib/py/utils.py @@ -10,7 +10,9 @@ import time class CmdExitFailure(Exception): - pass + def __init__(self, msg, cmd_obj): + super().__init__(msg) + self.cmd = cmd_obj class cmd: @@ -48,7 +50,7 @@ import time if len(stderr) > 0 and stderr[-1] == "\n": stderr = stderr[:-1] raise CmdExitFailure("Command failed: %s\nSTDOUT: %s\nSTDERR: %s" % - (self.proc.args, stdout, stderr)) + (self.proc.args, stdout, stderr), self) class bkg(cmd): -- 2.47.1

10 months, 3 weeks

4
5
0 0

[PATCH v2] selftests: arm coresight: sysfsmode testing

by Linu Cherian

Add sysfs mode selftest for ARM Coresight hardware tracer. The test will run below sequence for all possible sinks for every trace source available on the system. 1. Enable source and sink device to start tracing in sysfs mode 3. Run a standard dd command to be traced 4. Stop tracing 5. Readback tracedata - Test case is pass if the readback of tracedata is success else failure. - In case of ETR sink, the test is run with both default buffer mode and reserved buffer mode(if available). Sample output: selftests: drivers/hwtracing/coresight: sysfs_test_trace.sh Running sysfs trace with default settings 64+0 records in 64+0 records out 67108864 bytes (67 MB, 64 MiB) copied, 0.196945 s, 341 MB/s 32+0 records in 32+0 records out 16384 bytes (16 kB, 16 KiB) copied, 0.000805288 s, 20.3 MB/s CoreSight path testing (CPU0 -> tmc_etf0): PASS Signed-off-by: Linu Cherian <lcherian(a)marvell.com> --- Changelog from v1: - Added test description in commit message suggested by Shuah - Added config dependency file suggested by Shuah - Added TARGETS as suggested by James - Skipped TPIU as suggested by James - Added Reviewed-by tag tools/testing/selftests/Makefile | 1 + .../drivers/hwtracing/coresight/Makefile | 5 + .../drivers/hwtracing/coresight/config | 7 + .../hwtracing/coresight/sysfs_test_trace.sh | 146 ++++++++++++++++++ 4 files changed, 159 insertions(+) create mode 100644 tools/testing/selftests/drivers/hwtracing/coresight/Makefile create mode 100644 tools/testing/selftests/drivers/hwtracing/coresight/config create mode 100755 tools/testing/selftests/drivers/hwtracing/coresight/sysfs_test_trace.sh diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 363d031a16f7..15788c32de6b 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -18,6 +18,7 @@ TARGETS += devices/error_logs TARGETS += devices/probe TARGETS += dmabuf-heaps TARGETS += drivers/dma-buf +TARGETS += drivers/hwtracing/coresight TARGETS += drivers/s390x/uvdevice TARGETS += drivers/net TARGETS += drivers/net/bonding diff --git a/tools/testing/selftests/drivers/hwtracing/coresight/Makefile b/tools/testing/selftests/drivers/hwtracing/coresight/Makefile new file mode 100644 index 000000000000..7dc68ae1c0a9 --- /dev/null +++ b/tools/testing/selftests/drivers/hwtracing/coresight/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + +TEST_PROGS = sysfs_test_trace.sh + +include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/hwtracing/coresight/config b/tools/testing/selftests/drivers/hwtracing/coresight/config new file mode 100644 index 000000000000..47e9256957d3 --- /dev/null +++ b/tools/testing/selftests/drivers/hwtracing/coresight/config @@ -0,0 +1,7 @@ +CONFIG_CORESIGHT=y +CONFIG_CORESIGHT_LINKS_AND_SINKS=y +CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y +CONFIG_CORESIGHT_SINK_ETBV10 +CONFIG_CORESIGHT_SOURCE_ETM3X +CONFIG_CORESIGHT_SOURCE_ETM4X=y +CONFIG_CORESIGHT_TRBE=y diff --git a/tools/testing/selftests/drivers/hwtracing/coresight/sysfs_test_trace.sh b/tools/testing/selftests/drivers/hwtracing/coresight/sysfs_test_trace.sh new file mode 100755 index 000000000000..1939bbede1af --- /dev/null +++ b/tools/testing/selftests/drivers/hwtracing/coresight/sysfs_test_trace.sh @@ -0,0 +1,146 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2024 Marvell. + +# Test Arm CoreSight trace capture in sysfs mode +# Based on tools/perf/tests/shell/test_arm_coresight.sh + +glb_err=0 + +arm_cs_report() { + if [ $2 != 0 ]; then + echo "$1: FAIL" + glb_err=$2 + else + echo "$1: PASS" + fi +} + +is_device_sink() { + # If the node of "enable_sink" is existed under the device path, this + # means the device is a sink device. Need to exclude 'tpiu' since it + # doesn't have a readable file. + echo "$1" | grep -E -q -v "tpiu" + + if [ $? -eq 0 ] && [ -e "$1/enable_sink" ]; then + + return 0 + else + return 1 + fi +} + +# Configure sink for buffer mode +cfg_sink_buf_mode() { + sink_dev=$1 + mode=$2 + # Set buffer mode if supported + if [ -e "$sink_dev/buf_modes_available" ]; then + cat $sink_dev/buf_modes_available | grep -E -q $mode + if [ $? -eq 0 ]; then + echo $mode > $sink_dev/buf_mode_preferred + return 0 + fi + fi + + return 1 +} + +run_app() { + + taskset -c $1 dd if=/dev/urandom of=/dev/null bs=1M count=64 +} + +sysfs_trace() { + src_dev=$1 + sink_dev=$2 + cpu=$3 + + # Enable sink device + echo 1 > $sink_dev/enable_sink + # Enable source device + echo 1 > $src_dev/enable_source + + # Run app to be traced + run_app $cpu + + # Read back trace data + dd if=/dev/$sink_dev_name of=/tmp/tracedata + + # Verify if read is successful + err=$? + + # Disable source device + echo 0 > $src_dev/enable_source + + # Diskable sink device + echo 0 > $sink_dev/enable_sink + + arm_cs_report "CoreSight path testing (CPU$cpu -> $sink_dev_name)" $err +} + +try_sysfs_trace_resrv_buf() { + src_dev=$1 + sink_dev=$2 + cpu=$3 + + # Configure the resrved buffer mode if available + cfg_sink_buf_mode $sink_dev "resrv" + if [ $? -eq 0 ]; then + echo "Running sysfs trace with resrv buf mode" + sysfs_trace $src_dev $sink_dev $cpu + # Restore buffer mode + cfg_sink_buf_mode $sink_dev "auto" + if [ $? -eq 1 ]; then + echo "Failed to restore default buf mode" + fi + fi +} + +arm_cs_iterate_devices() { + src_dev=$1 + cpu=$3 + for cdev in $2/connections/out\:*; do + + # Skip testing if it's not a directory + ! [ -d $cdev ] && continue; + + # Read out its symbol link file name + sink_dev=`readlink -f $cdev` + + # Extract device name from path, e.g. + # sink_dev = '/sys/devices/platform/20010000.etf/tmc_etf0' + # `> sink_dev_name = 'tmc_etf0' + sink_dev_name=$(basename $sink_dev) + + if is_device_sink $sink_dev; then + # Run trace with resrv buf mode (if available) + try_sysfs_trace_resrv_buf $src_dev $sink_dev $cpu + + # Run the default mode + echo "Running sysfs trace with default settings" + sysfs_trace $src_dev $sink_dev $cpu + fi + + arm_cs_iterate_devices $src_dev $cdev $cpu + + done +} + +arm_cs_etm_traverse_path_test() { + # Iterate for every ETM device + for dev in /sys/bus/event_source/devices/cs_etm/cpu*; do + # Canonicalize the path + dev=`readlink -f $dev` + + # Find the ETM device belonging to which CPU + cpu=`cat $dev/cpu` + + # Use depth-first search (DFS) to iterate outputs + arm_cs_iterate_devices $dev $dev $cpu + done +} + +arm_cs_etm_traverse_path_test + +exit $glb_err -- 2.34.1

10 months, 3 weeks

2
1
0 0

[PATCH RFC] Makefile: Export absolute srctree path for out-of-tree builds

by Li Zhijian

Fixes an issue where out-of-tree kselftest builds fail when building the BPF and bpftools components. The failure occurs because the top-level Makefile passes a relative srctree path ('..') to its sub-Makefiles, which leads to errors in locating necessary files. For example, the following error is encountered: ``` $ make V=1 O=$build/ TARGETS=hid kselftest-all ... make -C ../tools/testing/selftests all make[4]: Entering directory '/path/to/linux/tools/testing/selftests/hid' make -C /path/to/linux/tools/testing/selftests/../../../tools/lib/bpf OUTPUT=/path/to/linux/O/kselftest/hid/tools/build/libbpf/ \ EXTRA_CFLAGS='-g -O0' \ DESTDIR=/path/to/linux/O/kselftest/hid/tools prefix= all install_headers make[5]: Entering directory '/path/to/linux/tools/lib/bpf' ... make[5]: Entering directory '/path/to/linux/tools/bpf/bpftool' Makefile:127: ../tools/build/Makefile.feature: No such file or directory make[5]: *** No rule to make target '../tools/build/Makefile.feature'. Stop. ``` To resolve this, the srctree is exported as an absolute path (abs_srctree) when performing an out-of-tree build. This ensures that all sub-Makefiles have the correct path to the source tree, preventing directory resolution errors. Signed-off-by: Li Zhijian <lizhijian(a)fujitsu.com> --- Request for Additional Testing We welcome all contributors and CI systems to test this change thoroughly. In theory, this change should not affect in-tree builds. However, to ensure stability and compatibility, we encourage testing across different configurations. What has been tested? - out-of-tree kernel build - out-of-tree kselftest-all --- Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Makefile b/Makefile index e5b8a8832c0c..36e65806bb5e 100644 --- a/Makefile +++ b/Makefile @@ -275,7 +275,8 @@ else ifeq ($(srcroot)/,$(dir $(CURDIR))) srcroot := .. endif -export srctree := $(if $(KBUILD_EXTMOD),$(abs_srctree),$(srcroot)) +srctree := $(if $(KBUILD_EXTMOD),$(abs_srctree),$(srcroot)) +export srctree := $(if $(building_out_of_srctree),$(abs_srctree),$(srctree)) ifdef building_out_of_srctree export VPATH := $(srcroot) -- 2.44.0

10 months, 3 weeks

4
4
0 0

[PATCH 0/2] fix reading ESP during coredump

by Nam Cao

Hi, In /proc/PID/stat, there is the kstkesp field which is the stack pointer of a thread. While the thread is active, this field reads zero. But during a coredump, it should have a valid value. However, at the moment, kstkesp is zero even during coredump. The first commit fixes this problem, and the second commit adds a selftest to detect if this problem appears again in the future. Nam Cao (2): fs/proc: do_task_stat: Fix ESP not readable during coredump selftests: coredump: Add stackdump test fs/proc/array.c | 36 ++-- tools/testing/selftests/coredump/Makefile | 7 + tools/testing/selftests/coredump/README.rst | 50 ++++++ tools/testing/selftests/coredump/stackdump | 14 ++ .../selftests/coredump/stackdump_test.c | 154 ++++++++++++++++++ 5 files changed, 243 insertions(+), 18 deletions(-) create mode 100644 tools/testing/selftests/coredump/Makefile create mode 100644 tools/testing/selftests/coredump/README.rst create mode 100755 tools/testing/selftests/coredump/stackdump create mode 100644 tools/testing/selftests/coredump/stackdump_test.c -- 2.39.5

10 months, 3 weeks

4
9
0 0

[PATCH bpf] selftests/bpf: add XDP_UMEM_TX_METADATA_LEN flag to umem_config

by Wei Fang

The Tx metadata test has been broken since the commit d5e726d9143c ("xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len"). Because this change requires XDP_UMEM_TX_METADATA_LEN flag to be set, otherwise xsk_buff_pool::tx_metadata_len will be initialized to 0, which means that the driver cannot get Tx metadata and cannot execute AF_XDP Tx metadata hooks. Fixes: d5e726d9143c ("xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len") Signed-off-by: Wei Fang <wei.fang(a)nxp.com> --- tools/testing/selftests/bpf/xdp_hw_metadata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/xdp_hw_metadata.c b/tools/testing/selftests/bpf/xdp_hw_metadata.c index 6f9956eed797..ad6c08dfd6c8 100644 --- a/tools/testing/selftests/bpf/xdp_hw_metadata.c +++ b/tools/testing/selftests/bpf/xdp_hw_metadata.c @@ -79,7 +79,7 @@ static int open_xsk(int ifindex, struct xsk *xsk, __u32 queue_id) .fill_size = XSK_RING_PROD__DEFAULT_NUM_DESCS, .comp_size = XSK_RING_CONS__DEFAULT_NUM_DESCS, .frame_size = XSK_UMEM__DEFAULT_FRAME_SIZE, - .flags = XSK_UMEM__DEFAULT_FLAGS, + .flags = XDP_UMEM_TX_METADATA_LEN, .tx_metadata_len = sizeof(struct xsk_tx_metadata), }; __u32 idx = 0; -- 2.34.1

10 months, 3 weeks

3
4
0 0

[PATCH v3 0/3] drivers: base: Don't match device with NULL of_node/fwnode/etc + tests

by Brian Norris

This series: 1. makes the behavior of_find_device_by_node(), bus_find_device_by_of_node(), bus_find_device_by_fwnode(), etc., more consistent when provided with a NULL node/handle; 2. adds kunit tests to validate the new NULL-argument behavior; and 3. makes some related improvements and refactoring for the drivers/base/ kunit tests. This series aims to prevent problems like the ones resolved in commit 5c8418cf4025 ("PCI/pwrctrl: Unregister platform device only if one actually exists"). Changes in v3: * Fix potential leak in test error case Changes in v2: * CC LKML (oops!) * Keep "devm" and "match" tests in separate suites Brian Norris (3): drivers: base: Don't match devices with NULL of_node/fwnode/etc drivers: base: test: Enable device model tests with KUNIT_ALL_TESTS drivers: base: test: Add ...find_device_by...(... NULL) tests drivers/base/core.c | 8 ++--- drivers/base/test/Kconfig | 1 + drivers/base/test/platform-device-test.c | 41 +++++++++++++++++++++++- 3 files changed, 45 insertions(+), 5 deletions(-) -- 2.47.1.613.gc27f4b7a9f-goog

10 months, 3 weeks

5
10
0 0

[PATCH] selftests/run_kselftest.sh: Fix help string for --per-test-log

by Brendan Jackman

This is documented as --per_test_log but the argument is actually --per-test-log. Signed-off-by: Brendan Jackman <jackmanb(a)google.com> --- tools/testing/selftests/run_kselftest.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/run_kselftest.sh b/tools/testing/selftests/run_kselftest.sh index a28c1416cb89b96ba5f8b287e68b324b51d95673..50e03eefe7ac70d1b21ec1da4d245182dda7b8ad 100755 --- a/tools/testing/selftests/run_kselftest.sh +++ b/tools/testing/selftests/run_kselftest.sh @@ -21,7 +21,7 @@ usage() cat <<EOF Usage: $0 [OPTIONS] -s | --summary Print summary with detailed log in output.log (conflict with -p) - -p | --per_test_log Print test log in /tmp with each test name (conflict with -s) + -p | --per-test-log Print test log in /tmp with each test name (conflict with -s) -t | --test COLLECTION:TEST Run TEST from COLLECTION -c | --collection COLLECTION Run all tests from COLLECTION -l | --list List the available collection:test entries --- base-commit: eabcdba3ad4098460a376538df2ae36500223c1e change-id: 20241220-per-test-log-33ecf9d49406 Best regards, -- Brendan Jackman <jackmanb(a)google.com>

10 months, 3 weeks

2
1
0 0

[PATCH AUTOSEL 6.12 29/29] bpf: consider that tail calls invalidate packet pointers

by Sasha Levin

From: Eduard Zingerman <eddyz87(a)gmail.com> [ Upstream commit 1a4607ffba35bf2a630aab299e34dd3f6e658d70 ] Tail-called programs could execute any of the helpers that invalidate packet pointers. Hence, conservatively assume that each tail call invalidates packet pointers. Making the change in bpf_helper_changes_pkt_data() automatically makes use of check_cfg() logic that computes 'changes_pkt_data' effect for global sub-programs, such that the following program could be rejected: int tail_call(struct __sk_buff *sk) { bpf_tail_call_static(sk, &jmp_table, 0); return 0; } SEC("tc") int not_safe(struct __sk_buff *sk) { int *p = (void *)(long)sk->data; ... make p valid ... tail_call(sk); *p = 42; /* this is unsafe */ ... } The tc_bpf2bpf.c:subprog_tc() needs change: mark it as a function that can invalidate packet pointers. Otherwise, it can't be freplaced with tailcall_freplace.c:entry_freplace() that does a tail call. Signed-off-by: Eduard Zingerman <eddyz87(a)gmail.com> Link: https://lore.kernel.org/r/20241210041100.1898468-8-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- net/core/filter.c | 2 ++ tools/testing/selftests/bpf/progs/tc_bpf2bpf.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/net/core/filter.c b/net/core/filter.c index 33125317994e..bbd0c08072cb 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -7934,6 +7934,8 @@ bool bpf_helper_changes_pkt_data(enum bpf_func_id func_id) case BPF_FUNC_xdp_adjust_head: case BPF_FUNC_xdp_adjust_meta: case BPF_FUNC_xdp_adjust_tail: + /* tail-called program could call any of the above */ + case BPF_FUNC_tail_call: return true; default: return false; diff --git a/tools/testing/selftests/bpf/progs/tc_bpf2bpf.c b/tools/testing/selftests/bpf/progs/tc_bpf2bpf.c index 8a0632c37839..79f5087dade2 100644 --- a/tools/testing/selftests/bpf/progs/tc_bpf2bpf.c +++ b/tools/testing/selftests/bpf/progs/tc_bpf2bpf.c @@ -10,6 +10,8 @@ int subprog(struct __sk_buff *skb) int ret = 1; __sink(ret); + /* let verifier know that 'subprog_tc' can change pointers to skb->data */ + bpf_skb_change_proto(skb, 0, 0); return ret; } -- 2.39.5

10 months, 3 weeks

1
0
0 0

[PATCH v6 0/2] kselftest: tmpfs: Add ksft macros and skip if no root

by Shivam Chaudhary

This version 5 patch series replace direct error handling methods with ksft macros, which provide better reporting.Currently, when the tmpfs test runs, it does not display any output if it passes,and if it fails (particularly when not run as root),it simply exits without any warning or message. This series of patch adds: 1. Add 'ksft_print_header()' and 'ksft_set_plan()' to structure test outputs more effectively. 2. skip if not run as root. 3. Replace direct error handling with 'ksft_test_result_*', macros for better reporting. v5->v6: - Skip if not run as root. v5 v1: https://lore.kernel.org/all/20241112143056.565122-2-cvam0000@gmail.com/ v5 v2: https://lore.kernel.org/all/20241112143056.565122-3-cvam0000@gmail.com/ v4->v5: - Remove unnecessary pass messages. - Remove unnecessary use of KSFT_SKIP. - Add appropriate use of ksft_exit_fail_msg. v4 v1: https://lore.kernel.org/all/8db9feab-0600-440b-b4b2-042695a100b5@linuxfound… v4 v2: https://lore.kernel.org/all/63d5e3bb-9817-4a34-98fe-823a9cac7c16@linuxfound… v3->v4: - Start a patchset - Split patch into smaller patches to make it easy to review. Patch1 Replace 'ksft_test_result_skip' with 'KSFT_SKIP' during root run check. Patch2 Replace 'ksft_test_result_fail' with 'KSFT_SKIP' where fail does not make sense, or failure could be due to not unsupported APIs with appropriate warnings. v3: https://lore.kernel.org/all/20241028185756.111832-1-cvam0000@gmail.com/ v2->v3: - Remove extra ksft_set_plan() - Remove function for unshare() - Fix the comment style v2: https://lore.kernel.org/all/20241026191621.2860376-1-cvam0000@gmail.com/ v1->v2: - Make the commit message more clear. v1: https://lore.kernel.org/all/20241024200228.1075840-1-cvam0000@gmail.com/T/#u thanks Shivam Shivam Chaudhary (2): selftests: tmpfs: Add Test-skip if not run as root selftests: tmpfs: Add kselftest support to tmpfs .../selftests/tmpfs/bug-link-o-tmpfile.c | 41 ++++++++++++------- 1 file changed, 27 insertions(+), 14 deletions(-) -- 2.34.1

10 months, 3 weeks

2
3
0 0

[PATCH net-next 4/4] selftests: net: Add a VLAN bridge binding selftest

by Petr Machata

Add a test that exercises bridge binding. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> --- CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/Makefile | 1 + .../selftests/net/vlan_bridge_binding.sh | 256 ++++++++++++++++++ 2 files changed, 257 insertions(+) create mode 100755 tools/testing/selftests/net/vlan_bridge_binding.sh diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index f09bd96cc978..73ee88d6b043 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -96,6 +96,7 @@ TEST_PROGS += test_bridge_backup_port.sh TEST_PROGS += fdb_flush.sh fdb_notify.sh TEST_PROGS += fq_band_pktlimit.sh TEST_PROGS += vlan_hw_filter.sh +TEST_PROGS += vlan_bridge_binding.sh TEST_PROGS += bpf_offload.py TEST_PROGS += ipv6_route_update_soft_lockup.sh TEST_PROGS += busy_poll_test.sh diff --git a/tools/testing/selftests/net/vlan_bridge_binding.sh b/tools/testing/selftests/net/vlan_bridge_binding.sh new file mode 100755 index 000000000000..e7cb8c678bde --- /dev/null +++ b/tools/testing/selftests/net/vlan_bridge_binding.sh @@ -0,0 +1,256 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source lib.sh + +ALL_TESTS=" + test_binding_on + test_binding_off + test_binding_toggle_on + test_binding_toggle_off + test_binding_toggle_on_when_upper_down + test_binding_toggle_off_when_upper_down + test_binding_toggle_on_when_lower_down + test_binding_toggle_off_when_lower_down +" + +setup_prepare() +{ + local port + + ip_link_add br up type bridge vlan_filtering 1 + + for port in d1 d2 d3; do + ip_link_add $port type veth peer name r$port + ip_link_set_up $port + ip_link_set_up r$port + ip_link_set_master $port br + done + + bridge_vlan_add vid 11 dev br self + bridge_vlan_add vid 11 dev d1 master + + bridge_vlan_add vid 12 dev br self + bridge_vlan_add vid 12 dev d2 master + + bridge_vlan_add vid 13 dev br self + bridge_vlan_add vid 13 dev d1 master + bridge_vlan_add vid 13 dev d2 master + + bridge_vlan_add vid 14 dev br self + bridge_vlan_add vid 14 dev d1 master + bridge_vlan_add vid 14 dev d2 master + bridge_vlan_add vid 14 dev d3 master +} + +operstate_is() +{ + local dev=$1; shift + local expect=$1; shift + + local operstate=$(ip -j link show $dev | jq -r .[].operstate) + if [[ $operstate == UP ]]; then + operstate=1 + elif [[ $operstate == DOWN || $operstate == LOWERLAYERDOWN ]]; then + operstate=0 + fi + echo -n $operstate + [[ $operstate == $expect ]] +} + +check_operstate() +{ + local dev=$1; shift + local expect=$1; shift + local operstate + + operstate=$(busywait 1000 \ + operstate_is "$dev" "$expect") + check_err $? "Got operstate of $operstate, expected $expect" +} + +add_one_vlan() +{ + local link=$1; shift + local id=$1; shift + + ip_link_add $link.$id link $link type vlan id $id "$@" +} + +add_vlans() +{ + add_one_vlan br 11 "$@" + add_one_vlan br 12 "$@" + add_one_vlan br 13 "$@" + add_one_vlan br 14 "$@" +} + +set_vlans() +{ + ip link set dev br.11 "$@" + ip link set dev br.12 "$@" + ip link set dev br.13 "$@" + ip link set dev br.14 "$@" +} + +down_netdevs() +{ + local dev + + for dev in "$@"; do + ip_link_set_down $dev + done +} + +check_operstates() +{ + local opst_11=$1; shift + local opst_12=$1; shift + local opst_13=$1; shift + local opst_14=$1; shift + + check_operstate br.11 $opst_11 + check_operstate br.12 $opst_12 + check_operstate br.13 $opst_13 + check_operstate br.14 $opst_14 +} + +do_test_binding() +{ + local inject=$1; shift + local what=$1; shift + local opsts_d1=$1; shift + local opsts_d2=$1; shift + local opsts_d12=$1; shift + local opsts_d123=$1; shift + + RET=0 + + defer_scope_push + down_netdevs d1 + $inject + check_operstates $opsts_d1 + defer_scope_pop + + defer_scope_push + down_netdevs d2 + $inject + check_operstates $opsts_d2 + defer_scope_pop + + defer_scope_push + down_netdevs d1 d2 + $inject + check_operstates $opsts_d12 + defer_scope_pop + + defer_scope_push + down_netdevs d1 d2 d3 + $inject + check_operstates $opsts_d123 + defer_scope_pop + + log_test "Test bridge_binding $what" +} + +do_test_binding_on() +{ + local inject=$1; shift + local what=$1; shift + + do_test_binding "$inject" "$what" \ + "0 1 1 1" \ + "1 0 1 1" \ + "0 0 0 1" \ + "0 0 0 0" +} + +do_test_binding_off() +{ + local inject=$1; shift + local what=$1; shift + + do_test_binding "$inject" "$what" \ + "1 1 1 1" \ + "1 1 1 1" \ + "1 1 1 1" \ + "0 0 0 0" +} + +test_binding_on() +{ + add_vlans bridge_binding on + set_vlans up + do_test_binding_on : "on" +} + +test_binding_off() +{ + add_vlans bridge_binding off + set_vlans up + do_test_binding_off : "off" +} + +test_binding_toggle_on() +{ + add_vlans bridge_binding off + set_vlans up + set_vlans type vlan bridge_binding on + do_test_binding_on : "off->on" +} + +test_binding_toggle_off() +{ + add_vlans bridge_binding on + set_vlans up + set_vlans type vlan bridge_binding off + do_test_binding_off : "on->off" +} + +dfr_set_binding_on() +{ + set_vlans type vlan bridge_binding on + defer set_vlans type vlan bridge_binding off +} + +dfr_set_binding_off() +{ + set_vlans type vlan bridge_binding off + defer set_vlans type vlan bridge_binding on +} + +test_binding_toggle_on_when_lower_down() +{ + add_vlans bridge_binding off + set_vlans up + do_test_binding_on dfr_set_binding_on "off->on when lower down" +} + +test_binding_toggle_off_when_lower_down() +{ + add_vlans bridge_binding on + set_vlans up + do_test_binding_off dfr_set_binding_off "on->off when lower down" +} + +test_binding_toggle_on_when_upper_down() +{ + add_vlans bridge_binding off + set_vlans type vlan bridge_binding on + set_vlans up + do_test_binding_on : "off->on when upper down" +} + +test_binding_toggle_off_when_upper_down() +{ + add_vlans bridge_binding on + set_vlans type vlan bridge_binding off + set_vlans up + do_test_binding_off : "on->off when upper down" +} + +trap defer_scopes_cleanup EXIT +setup_prepare +tests_run + +exit $EXIT_STATUS -- 2.47.0

10 months, 4 weeks

2
1
0 0

[PATCH net-next 3/4] selftests: net: lib: Add a couple autodefer helpers

by Petr Machata

Alongside the helper ip_link_set_up(), one to set the link down will be useful as well. Add a helper to determine the link state as well, ip_link_is_up(), and use it to short-circuit any changes if the state is already the desired one. Furthermore, add a helper bridge_vlan_add(). Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> --- CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/lib.sh | 31 ++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index 2cd5c743b2d9..0bd9a038a1f0 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -477,12 +477,33 @@ ip_link_set_addr() defer ip link set dev "$name" address "$old_addr" } +ip_link_is_up() +{ + local name=$1; shift + + local state=$(ip -j link show "$name" | + jq -r '(.[].flags[] | select(. == "UP")) // "DOWN"') + [[ $state == "UP" ]] +} + ip_link_set_up() { local name=$1; shift - ip link set dev "$name" up - defer ip link set dev "$name" down + if ! ip_link_is_up "$name"; then + ip link set dev "$name" up + defer ip link set dev "$name" down + fi +} + +ip_link_set_down() +{ + local name=$1; shift + + if ip_link_is_up "$name"; then + ip link set dev "$name" down + defer ip link set dev "$name" up + fi } ip_addr_add() @@ -498,3 +519,9 @@ ip_route_add() ip route add "$@" defer ip route del "$@" } + +bridge_vlan_add() +{ + bridge vlan add "$@" + defer bridge vlan del "$@" +} -- 2.47.0

10 months, 4 weeks

2
1
0 0

[PATCH for-next] selftests/alsa: Fix circular dependency involving global-timer

by Li Zhijian

The pattern rule `$(OUTPUT)/%: %.c` inadvertently included a circular dependency on the global-timer target due to its inclusion in $(TEST_GEN_PROGS_EXTENDED). This resulted in a circular dependency warning during the build process. To resolve this, the dependency on $(TEST_GEN_PROGS_EXTENDED) has been replaced with an explicit dependency on $(OUTPUT)/libatest.so. This change ensures that libatest.so is built before any other targets that require it, without creating a circular dependency. This fix addresses the following warning: make[4]: Entering directory 'tools/testing/selftests/alsa' make[4]: Circular default_modconfig/kselftest/alsa/global-timer <- default_modconfig/kselftest/alsa/global-timer dependency dropped. make[4]: Nothing to be done for 'all'. make[4]: Leaving directory 'tools/testing/selftests/alsa' Cc: Mark Brown <broonie(a)kernel.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: Shuah Khan <shuah(a)kernel.org> Signed-off-by: Li Zhijian <lizhijian(a)fujitsu.com> --- Cc: linux-sound(a)vger.kernel.org Cc: linux-kselftest(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org --- tools/testing/selftests/alsa/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/alsa/Makefile b/tools/testing/selftests/alsa/Makefile index 944279160fed..8dab90ad22bb 100644 --- a/tools/testing/selftests/alsa/Makefile +++ b/tools/testing/selftests/alsa/Makefile @@ -27,5 +27,5 @@ include ../lib.mk $(OUTPUT)/libatest.so: conf.c alsa-local.h $(CC) $(CFLAGS) -shared -fPIC $< $(LDLIBS) -o $@ -$(OUTPUT)/%: %.c $(TEST_GEN_PROGS_EXTENDED) alsa-local.h +$(OUTPUT)/%: %.c $(OUTPUT)/libatest.so alsa-local.h $(CC) $(CFLAGS) $< $(LDLIBS) -latest -o $@ -- 2.44.0

10 months, 4 weeks

2
1
0 0

[PATCH] selftests/mm: Added new test cases to the migration test

by Donet Tom

Added three new test cases to the migration tests: 1. Shared anon THP migration test This test will mmap shared anon memory, madvise it to MADV_HUGEPAGE, then do migration entry testing. One thread will move pages back and forth between nodes whilst other threads try and access them. 2. Private anon hugetlb migration test This test will mmap private anon hugetlb memory and then do the migration entry testing. 3. Shared anon hugetlb migration test This test will mmap shared anon hugetlb memory and then do the migration entry testing. Test results ============ # ./tools/testing/selftests/mm/migration TAP version 13 1..6 # Starting 6 tests from 1 test cases. # RUN migration.private_anon ... # OK migration.private_anon ok 1 migration.private_anon # RUN migration.shared_anon ... # OK migration.shared_anon ok 2 migration.shared_anon # RUN migration.private_anon_thp ... # OK migration.private_anon_thp ok 3 migration.private_anon_thp # RUN migration.shared_anon_thp ... # OK migration.shared_anon_thp ok 4 migration.shared_anon_thp # RUN migration.private_anon_htlb ... # OK migration.private_anon_htlb ok 5 migration.private_anon_htlb # RUN migration.shared_anon_htlb ... # OK migration.shared_anon_htlb ok 6 migration.shared_anon_htlb # PASSED: 6 / 6 tests passed. # Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0 # Signed-off-by: Donet Tom <donettom(a)linux.ibm.com> --- tools/testing/selftests/mm/migration.c | 99 ++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) diff --git a/tools/testing/selftests/mm/migration.c b/tools/testing/selftests/mm/migration.c index 64bcbb7151cf..1e3a595fbf01 100644 --- a/tools/testing/selftests/mm/migration.c +++ b/tools/testing/selftests/mm/migration.c @@ -204,4 +204,103 @@ TEST_F_TIMEOUT(migration, private_anon_thp, 2*RUNTIME) ASSERT_EQ(pthread_cancel(self->threads[i]), 0); } +/* + * migration test with shared anon THP page + */ + +TEST_F_TIMEOUT(migration, shared_anon_thp, 2*RUNTIME) +{ + pid_t pid; + uint64_t *ptr; + int i; + + if (self->nthreads < 2 || self->n1 < 0 || self->n2 < 0) + SKIP(return, "Not enough threads or NUMA nodes available"); + + ptr = mmap(NULL, 2 * TWOMEG, PROT_READ | PROT_WRITE, + MAP_SHARED | MAP_ANONYMOUS, -1, 0); + ASSERT_NE(ptr, MAP_FAILED); + + ptr = (uint64_t *) ALIGN((uintptr_t) ptr, TWOMEG); + ASSERT_EQ(madvise(ptr, TWOMEG, MADV_HUGEPAGE), 0); + + memset(ptr, 0xde, TWOMEG); + for (i = 0; i < self->nthreads - 1; i++) { + pid = fork(); + if (!pid) { + prctl(PR_SET_PDEATHSIG, SIGHUP); + /* Parent may have died before prctl so check now. */ + if (getppid() == 1) + kill(getpid(), SIGHUP); + access_mem(ptr); + } else { + self->pids[i] = pid; + } + } + + ASSERT_EQ(migrate(ptr, self->n1, self->n2), 0); + for (i = 0; i < self->nthreads - 1; i++) + ASSERT_EQ(kill(self->pids[i], SIGTERM), 0); +} + +/* + * migration test with private anon hugetlb page + */ +TEST_F_TIMEOUT(migration, private_anon_htlb, 2*RUNTIME) +{ + uint64_t *ptr; + int i; + + if (self->nthreads < 2 || self->n1 < 0 || self->n2 < 0) + SKIP(return, "Not enough threads or NUMA nodes available"); + + ptr = mmap(NULL, TWOMEG, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0); + ASSERT_NE(ptr, MAP_FAILED); + + memset(ptr, 0xde, TWOMEG); + for (i = 0; i < self->nthreads - 1; i++) + if (pthread_create(&self->threads[i], NULL, access_mem, ptr)) + perror("Couldn't create thread"); + + ASSERT_EQ(migrate(ptr, self->n1, self->n2), 0); + for (i = 0; i < self->nthreads - 1; i++) + ASSERT_EQ(pthread_cancel(self->threads[i]), 0); +} + +/* + * migration test with shared anon hugetlb page + */ +TEST_F_TIMEOUT(migration, shared_anon_htlb, 2*RUNTIME) +{ + pid_t pid; + uint64_t *ptr; + int i; + + if (self->nthreads < 2 || self->n1 < 0 || self->n2 < 0) + SKIP(return, "Not enough threads or NUMA nodes available"); + + ptr = mmap(NULL, TWOMEG, PROT_READ | PROT_WRITE, + MAP_SHARED | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0); + ASSERT_NE(ptr, MAP_FAILED); + + memset(ptr, 0xde, TWOMEG); + for (i = 0; i < self->nthreads - 1; i++) { + pid = fork(); + if (!pid) { + prctl(PR_SET_PDEATHSIG, SIGHUP); + /* Parent may have died before prctl so check now. */ + if (getppid() == 1) + kill(getpid(), SIGHUP); + access_mem(ptr); + } else { + self->pids[i] = pid; + } + } + + ASSERT_EQ(migrate(ptr, self->n1, self->n2), 0); + for (i = 0; i < self->nthreads - 1; i++) + ASSERT_EQ(kill(self->pids[i], SIGTERM), 0); +} + TEST_HARNESS_MAIN -- 2.37.2

10 months, 4 weeks

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror