- Linux-kselftest-mirror - lists.linaro.org

[PATCH net 0/7] mptcp: fix inconsistent backup usage

by Matthieu Baerts (NGI0)

In all the MPTCP backup related tests, the backup flag was set on one side, and the expected behaviour is to have both sides respecting this decision. That's also the "natural" way, and what the users seem to expect. On the scheduler side, only the 'backup' field was checked, which is supposed to be set only if the other peer flagged a subflow as backup. But in various places, this flag was also set when the local host flagged the subflow as backup, certainly to have the expected behaviour mentioned above. Patch 1 modifies the packet scheduler to check if the backup flag has been set on both directions, not to change its behaviour after having applied the following patches. That's what the default packet scheduler should have done since the beginning in v5.7. Patch 2 fixes the backup flag being mirrored on the MPJ+SYN+ACK by accident since its introduction in v5.7. Instead, the received and sent backup flags are properly distinguished in requests. Patch 3 stops setting the received backup flag as well when sending an MP_PRIO, something that was done since the MP_PRIO support in v5.12. Patch 4 adds related and missing MIB counters to be able to easily check if MP_JOIN are sent with a backup flag. Certainly because these counters were not there, the behaviour that is fixed by patches here was not properly verified. Patch 5 validates the previous patch by extending the MPTCP Join selftest. Patch 6 fixes the backup support in signal endpoints: if a signal endpoint had the backup flag, it was not set in the MPJ+SYN+ACK as expected. It was only set for ongoing connections, but not future ones as expected, since the introduction of the backup flag in endpoints in v5.10. Patch 7 validates the previous patch by extending the MPTCP Join selftest as well. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Matthieu Baerts (NGI0) (7): mptcp: sched: check both directions for backup mptcp: distinguish rcv vs sent backup flag in requests mptcp: pm: only set request_bkup flag when sending MP_PRIO mptcp: mib: count MPJ with backup flag selftests: mptcp: join: validate backup in MPJ mptcp: pm: fix backup support in signal endpoints selftests: mptcp: join: check backup support in signal endp include/trace/events/mptcp.h | 2 +- net/mptcp/mib.c | 2 + net/mptcp/mib.h | 2 + net/mptcp/options.c | 2 +- net/mptcp/pm.c | 12 +++++ net/mptcp/pm_netlink.c | 19 ++++++- net/mptcp/pm_userspace.c | 18 +++++++ net/mptcp/protocol.c | 10 ++-- net/mptcp/protocol.h | 4 ++ net/mptcp/subflow.c | 10 ++++ tools/testing/selftests/net/mptcp/mptcp_join.sh | 72 ++++++++++++++++++++----- 11 files changed, 132 insertions(+), 21 deletions(-) --- base-commit: 301927d2d2eb8e541357ba850bc7a1a74dbbd670 change-id: 20240727-upstream-net-20240727-mptcp-backup-signal-948235f2ad08 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

1 year, 1 month

2
8
0 0

[PATCH bpf-next v2 0/3] selftests/bpf: convert test_dev_cgroup to test_progs

by Alexis Lothoré (eBPF Foundation)

Hello, this small series aims to integrate test_dev_cgroup in test_progs so it could be run automatically in CI. The new version brings a few differences with the current one: - test now uses directly syscalls instead of wrapping commandline tools into system() calls - test_progs manipulates /dev/null (eg: redirecting test logs into it), so disabling access to it in the bpf program confuses the tests. To fix this, the first commit modifies the bpf program to allow access to char devices 1:3 (/dev/null), and disable access to char devices 1:5 (/dev/zero) - once test is converted, add a small subtest to also check for device type interpretation (char or block) - paths used in mknod tests are now in /dev instead of /tmp: due to the CI runner organisation and mountpoints manipulations, trying to create nodes in /tmp leads to errors unrelated to the test (ie, mknod calls refused by kernel, not the bpf program). I don't understand exactly the root cause at the deepest point (all I see in CI is an -ENXIO error on mknod when trying to create the node in tmp, and I can not make sense out of it neither replicate it locally), so I would gladly take inputs from anyone more educated than me about this. The new test_progs part has been tested in a local qemu environment as well as in upstream CI: ./test_progs -a cgroup_dev 47/1 cgroup_dev/deny-mknod:OK 47/2 cgroup_dev/allow-mknod:OK 47/3 cgroup_dev/deny-mknod-wrong-type:OK 47/4 cgroup_dev/allow-read:OK 47/5 cgroup_dev/allow-write:OK 47/6 cgroup_dev/deny-read:OK 47/7 cgroup_dev/deny-write:OK 47 cgroup_dev:OK Summary: 1/7 PASSED, 0 SKIPPED, 0 FAILED --- Changes in v2: - directly pass expected ret code to subtests instead of boolean pass/not pass - fix faulty fd check in subtest expected to fail on open - fix wrong subtest name - pass test buffer and corresponding size to read/write subtests - use correct series prefix - Link to v1: https://lore.kernel.org/r/20240725-convert_dev_cgroup-v1-0-2c8cbd487c44@boo… --- Alexis Lothoré (eBPF Foundation) (3): selftests/bpf: do not disable /dev/null device access in cgroup dev test selftests/bpf: convert test_dev_cgroup to test_progs selftests/bpf: add wrong type test to cgroup dev tools/testing/selftests/bpf/.gitignore | 1 - tools/testing/selftests/bpf/Makefile | 2 - .../testing/selftests/bpf/prog_tests/cgroup_dev.c | 113 +++++++++++++++++++++ tools/testing/selftests/bpf/progs/dev_cgroup.c | 4 +- tools/testing/selftests/bpf/test_dev_cgroup.c | 85 ---------------- 5 files changed, 115 insertions(+), 90 deletions(-) --- base-commit: 3e9fef7751a84a7d02bbe14a67d3a5d301cbd156 change-id: 20240723-convert_dev_cgroup-6464b0d37f1a Best regards, -- Alexis Lothoré, Bootlin Embedded Linux and Kernel engineering https://bootlin.com

1 year, 1 month

4
12
0 0

[PATCH] MAINTAINERS: Add selftests to DMA-BUF HEAPS FRAMEWORK entry

by Zenghui Yu

Include dmabuf-heaps selftests in the correct entry so that updates to it can be sent to the right place. Signed-off-by: Zenghui Yu <yuzenghui(a)huawei.com> --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 42decde38320..b7f24c9fb0e2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6660,6 +6660,7 @@ F: drivers/dma-buf/dma-heap.c F: drivers/dma-buf/heaps/* F: include/linux/dma-heap.h F: include/uapi/linux/dma-heap.h +F: tools/testing/selftests/dmabuf-heaps/ DMC FREQUENCY DRIVER FOR SAMSUNG EXYNOS5422 M: Lukasz Luba <lukasz.luba(a)arm.com> -- 2.33.0

1 year, 1 month

2
1
0 0

[PATCH v5 0/5] pids controller events rework

by Michal Koutný

This makes pids.events:max affine to pids.max limit. How are the new events supposed to be useful? - pids.events.local:max - tells that cgroup's limit is hit (too tight?) - pids.events:* - "only" directs top-down search to cgroups of interest Changes from v4 (https://lore.kernel.org/r/20240416142014.27630-1-mkoutny@suse.com) - rebased on cgroup/for-6.10 (rather cgroup/for-next, there's no rush) - introduce pids_files_legacy at one place (Tejun) - more descriptive Documentation/ (Tejun) Changes from v3 (https://lore.kernel.org/r/20240405170548.15234-1-mkoutny@suse.com) - use existing functions for TAP output in selftest (Muhammad) - formatting in selftest (Muhammad) - remove pids.events:max.imposed event, keep it internal (Johannes) - allow legacy behavior with a mount option - detach migration charging patches - drop RFC prefix Changes from v2 (https://lore.kernel.org/r/20200205134426.10570-1-mkoutny@suse.com) - implemented pids.events.local (Tejun) - added migration charging [1] https://lore.kernel.org/r/20230202155626.1829121-1-hannes@cmpxchg.org/ Michal Koutný (5): cgroup/pids: Separate semantics of pids.events related to pids.max cgroup/pids: Make event counters hierarchical cgroup/pids: Add pids.events.local selftests: cgroup: Lexicographic order in Makefile selftests: cgroup: Add basic tests for pids controller Documentation/admin-guide/cgroup-v1/pids.rst | 3 +- Documentation/admin-guide/cgroup-v2.rst | 21 ++- include/linux/cgroup-defs.h | 7 +- kernel/cgroup/cgroup.c | 15 +- kernel/cgroup/pids.c | 129 +++++++++++--- tools/testing/selftests/cgroup/.gitignore | 11 +- tools/testing/selftests/cgroup/Makefile | 25 +-- tools/testing/selftests/cgroup/test_pids.c | 178 +++++++++++++++++++ 8 files changed, 346 insertions(+), 43 deletions(-) create mode 100644 tools/testing/selftests/cgroup/test_pids.c base-commit: 21c38a3bd4ee3fb7337d013a638302fb5e5f9dc2 -- 2.44.0

1 year, 1 month

4
10
0 0

[PATCH v2 0/4] Introduce userspace-driven ALSA timers

by Ivan Orlov

There are multiple possible timer sources which could be useful for the sound stream synchronization: hrtimers, hardware clocks (e.g. PTP), timer wheels (jiffies). Currently, using one of them to synchronize the audio stream of snd-aloop module would require writing a kernel-space driver which exports an ALSA timer through the snd_timer interface. However, it is not really convenient for application developers, who may want to define their custom timer sources for audio synchronization. For instance, we could have a network application which receives frames and sends them to snd-aloop pcm device, and another application listening on the other end of snd-aloop. It makes sense to transfer a new period of data only when certain amount of frames is received through the network, but definitely not when a certain amount of jiffies on a local system elapses. Since all of the devices are purely virtual it won't introduce any glitches and will help the application developers to avoid using sample-rate conversion. This patch series introduces userspace-driven ALSA timers: virtual timers which are created and controlled from userspace. The timer can be created from the userspace using the new ioctl SNDRV_TIMER_IOCTL_CREATE. After creating a timer, it becomes available for use system-wide, so it can be passed to snd-aloop as a timer source (timer_source parameter would be "-1.SNDRV_TIMER_GLOBAL_UDRIVEN.{timer_id}"). When the userspace app decides to trigger a timer, it calls another ioctl SNDRV_TIMER_IOCTL_TRIGGER on the file descriptor of a timer. It initiates a transfer of a new period of data. Userspace-driven timers are associated with file descriptors. If the application wishes to destroy the timer, it can simply release the file descriptor of a virtual timer. I believe introducing new ioctl calls is quite inconvenient (as we have a limited amount of them), but other possible ways of app <-> kernel communication (like virtual FS) seem completely inappropriate for this task (but I'd love to discuss alternative solutions). This patch series also updates the snd-aloop module so the global timers can be used as a timer_source for it (it allows using userspace-driven timers as timer source). V2 of this patch series fixes some problems found by Christophe Jaillet <christophe.jaillet(a)wanadoo.fr>. Please, find the patch-specific changelog in the following patches. Ivan Orlov (4): ALSA: aloop: Allow using global timers Docs/sound: Add documentation for userspace-driven ALSA timers ALSA: timer: Introduce virtual userspace-driven timers selftests: ALSA: Cover userspace-driven timers with test Documentation/sound/index.rst | 1 + Documentation/sound/utimers.rst | 120 +++++++++++ include/uapi/sound/asound.h | 17 ++ sound/core/Kconfig | 10 + sound/core/timer.c | 213 ++++++++++++++++++++ sound/drivers/aloop.c | 2 + tools/testing/selftests/alsa/Makefile | 2 +- tools/testing/selftests/alsa/global-timer.c | 87 ++++++++ tools/testing/selftests/alsa/utimer-test.c | 137 +++++++++++++ 9 files changed, 588 insertions(+), 1 deletion(-) create mode 100644 Documentation/sound/utimers.rst create mode 100644 tools/testing/selftests/alsa/global-timer.c create mode 100644 tools/testing/selftests/alsa/utimer-test.c -- 2.34.1

1 year, 1 month

3
7
0 0

kselftest/next build: 7 builds: 2 failed, 5 passed, 1 warning (v6.11-rc1)

by kernelci.org bot

kselftest/next build: 7 builds: 2 failed, 5 passed, 1 warning (v6.11-rc1) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v6.11-rc1/ Tree: kselftest Branch: next Git Describe: v6.11-rc1 Git Commit: 8400291e289ee6b2bf9779ff1c83a291501f017b Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures Build Failures Detected: arm64: defconfig+kselftest+arm64-chromebook: (clang-16) FAIL defconfig+kselftest+arm64-chromebook: (gcc-12) FAIL Warnings Detected: arm64: arm: i386: x86_64: x86_64_defconfig+kselftest (clang-16): 1 warning Warnings summary: 1 vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x39: relocation to !ENDBR: .text+0x14ef94 ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-12) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-16) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-16) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x39: relocation to !ENDBR: .text+0x14ef94 --- For more info write to <info(a)kernelci.org>

1 year, 1 month

1
0
0 0

kselftest/fixes build: 7 builds: 2 failed, 5 passed, 1 warning (v6.11-rc1)

by kernelci.org bot

kselftest/fixes build: 7 builds: 2 failed, 5 passed, 1 warning (v6.11-rc1) Full Build Summary: https://kernelci.org/build/kselftest/branch/fixes/kernel/v6.11-rc1/ Tree: kselftest Branch: fixes Git Describe: v6.11-rc1 Git Commit: 8400291e289ee6b2bf9779ff1c83a291501f017b Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures Build Failures Detected: arm64: defconfig+kselftest+arm64-chromebook: (clang-16) FAIL defconfig+kselftest+arm64-chromebook: (gcc-12) FAIL Warnings Detected: arm64: arm: i386: x86_64: x86_64_defconfig+kselftest (clang-16): 1 warning Warnings summary: 1 vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x39: relocation to !ENDBR: .text+0x14ef94 ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-12) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-16) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-16) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x39: relocation to !ENDBR: .text+0x14ef94 --- For more info write to <info(a)kernelci.org>

1 year, 1 month

1
0
0 0

[PATCH][next] tools: selftests: riscv: Fix spelling mistake "regesters" -> "registers"

by Colin Ian King

There are a couple of spelling mistakes in ksft_test_result_fail messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/riscv/vector/v_initval_nolibc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/riscv/vector/v_initval_nolibc.c b/tools/testing/selftests/riscv/vector/v_initval_nolibc.c index 1dd94197da30..6838c561e4c9 100644 --- a/tools/testing/selftests/riscv/vector/v_initval_nolibc.c +++ b/tools/testing/selftests/riscv/vector/v_initval_nolibc.c @@ -49,14 +49,14 @@ int main(void) ksft_print_msg("vl = %lu\n", vl); if (datap[0] != 0x00 && datap[0] != 0xff) { - ksft_test_result_fail("v-regesters are not properly initialized\n"); + ksft_test_result_fail("v-registers are not properly initialized\n"); dump(datap, vl * 4); exit(-1); } for (i = 1; i < vl * 4; i++) { if (datap[i] != datap[0]) { - ksft_test_result_fail("detect stale values on v-regesters\n"); + ksft_test_result_fail("detect stale values on v-registers\n"); dump(datap, vl * 4); exit(-2); } -- 2.39.2

1 year, 1 month

2
1
0 0

mm, memcg: cg2 memory{.swap,}.peak write handlers

by David Finkel

This is an update of a previous series[1] addressing Johannes' comments, and rebasing on top of linus's master. Unfortunately, linus's master doesn't seem to be bootable at the moment, so I haven't re-run the tests on this change yet. I'll see about re-running everything in the morning. (root= resolution seems to be failing both for x86-64 (in qemu) and usermode linux) Documentation/admin-guide/cgroup-v2.rst | 26 ++-- include/linux/cgroup-defs.h | 5 + include/linux/cgroup.h | 3 + include/linux/memcontrol.h | 5 + include/linux/page_counter.h | 6 +- kernel/cgroup/cgroup-internal.h | 2 + kernel/cgroup/cgroup.c | 7 ++ mm/memcontrol.c | 117 ++++++++++++++++-- mm/page_counter.c | 30 +++-- tools/testing/selftests/cgroup/cgroup_util.c | 22 ++++ tools/testing/selftests/cgroup/cgroup_util.h | 2 + tools/testing/selftests/cgroup/test_memcontrol.c | 226 ++++++++++++++++++++++++++++++++-- 12 files changed, 416 insertions(+), 35 deletions(-) [1]: https://lore.kernel.org/cgroups/20240722235554.2911971-1-davidf@vimeo.com/T/ Thanks for all the constructive comments and discussion! David Finkel Senior Principal Engineer, Core Services Vimeo Inc.

1 year, 1 month

4
7
0 0

[PATCH v5 1/2] mm, memcg: cg2 memory{.swap,}.peak write handlers

by David Finkel

This patch revision addresses a few comments from Longman and Johannes here[1], and rebases onto master again. (I still have issues with starting my UML instance to run the tests. I'll see if I an figure out what's going on with that after I get some other work done today) [1]: https://lore.kernel.org/cgroups/20240723233149.3226636-1-davidf@vimeo.com/T/ Thanks again, David Finkel Senior Principal Software Engineer, Core Service Vimeo Inc.

1 year, 1 month

2
4
0 0

[PATCH net 0/5] mptcp: fix signal endpoint readd

by Matthieu Baerts (NGI0)

Issue #501 [1] showed that the Netlink PM currently doesn't correctly support removal and re-add of signal endpoints. Patches 1 and 2 address the issue: the first one in the userspace path- manager, introduced in v5.19 ; and the second one in the in-kernel path- manager, introduced in v5.7. Patch 3 introduces a related selftest. There is no 'Fixes' tag, because it might be hard to backport it automatically, as missing helpers in Bash will not be caught when compiling the kernel or the selftests. The last two patches address two small issues in the MPTCP selftests, one introduced in v6.6., and the other one in v5.17. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/501 [1] Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Liu Jing (1): selftests: mptcp: always close input's FD if opened Paolo Abeni (4): mptcp: fix user-space PM announced address accounting mptcp: fix NL PM announced address accounting selftests: mptcp: add explicit test case for remove/readd selftests: mptcp: fix error path net/mptcp/pm_netlink.c | 27 ++++++++++++++------ tools/testing/selftests/net/mptcp/mptcp_connect.c | 8 +++--- tools/testing/selftests/net/mptcp/mptcp_join.sh | 31 ++++++++++++++++++++++- 3 files changed, 53 insertions(+), 13 deletions(-) --- base-commit: 301927d2d2eb8e541357ba850bc7a1a74dbbd670 change-id: 20240726-upstream-net-20240726-mptcp-fix-signal-readd-f3c72bbcbceb Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

1 year, 1 month

2
6
0 0

[PATCH v2] kselftests: dmabuf-heaps: Ensure the driver name is null-terminated

by Zenghui Yu

Even if a vgem device is configured in, we will skip the import_vgem_fd() test almost every time. TAP version 13 1..11 # Testing heap: system # ======================================= # Testing allocation and importing: ok 1 # SKIP Could not open vgem -1 The problem is that we use the DRM_IOCTL_VERSION ioctl to query the driver version information but leave the name field a non-null-terminated string. Terminate it properly to actually test against the vgem device. While at it, let's check the length of the driver name is exactly 4 bytes and return early otherwise (in case there is a name like "vgemfoo" that gets converted to "vgem\0" unexpectedly). Signed-off-by: Zenghui Yu <yuzenghui(a)huawei.com> --- * From v1 [1]: - Check version.name_len is exactly 4 bytes and return early otherwise [1] https://lore.kernel.org/r/20240708134654.1725-1-yuzenghui@huawei.com P.S., Maybe worth including the kselftests file into "DMA-BUF HEAPS FRAMEWORK" MAINTAINERS entry? tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c b/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c index 5f541522364f..5d0a809dc2df 100644 --- a/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c +++ b/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c @@ -29,9 +29,11 @@ static int check_vgem(int fd) version.name = name; ret = ioctl(fd, DRM_IOCTL_VERSION, &version); - if (ret) + if (ret || version.name_len != 4) return 0; + name[4] = '\0'; + return !strcmp(name, "vgem"); } -- 2.33.0

1 year, 1 month

2
2
0 0

[PATCH v8 4/5] KVM: riscv: selftests: Fix compile error

by Yong-Xuan Wang

Fix compile error introduced by commit d27c34a73514 ("KVM: riscv: selftests: Add some Zc* extensions to get-reg-list test"). These 4 lines should be end with ";". Fixes: d27c34a73514 ("KVM: riscv: selftests: Add some Zc* extensions to get-reg-list test") Signed-off-by: Yong-Xuan Wang <yongxuan.wang(a)sifive.com> --- tools/testing/selftests/kvm/riscv/get-reg-list.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/kvm/riscv/get-reg-list.c b/tools/testing/selftests/kvm/riscv/get-reg-list.c index f92c2fb23fcd..8e34f7fa44e9 100644 --- a/tools/testing/selftests/kvm/riscv/get-reg-list.c +++ b/tools/testing/selftests/kvm/riscv/get-reg-list.c @@ -961,10 +961,10 @@ KVM_ISA_EXT_SIMPLE_CONFIG(zbkb, ZBKB); KVM_ISA_EXT_SIMPLE_CONFIG(zbkc, ZBKC); KVM_ISA_EXT_SIMPLE_CONFIG(zbkx, ZBKX); KVM_ISA_EXT_SIMPLE_CONFIG(zbs, ZBS); -KVM_ISA_EXT_SIMPLE_CONFIG(zca, ZCA), -KVM_ISA_EXT_SIMPLE_CONFIG(zcb, ZCB), -KVM_ISA_EXT_SIMPLE_CONFIG(zcd, ZCD), -KVM_ISA_EXT_SIMPLE_CONFIG(zcf, ZCF), +KVM_ISA_EXT_SIMPLE_CONFIG(zca, ZCA); +KVM_ISA_EXT_SIMPLE_CONFIG(zcb, ZCB); +KVM_ISA_EXT_SIMPLE_CONFIG(zcd, ZCD); +KVM_ISA_EXT_SIMPLE_CONFIG(zcf, ZCF); KVM_ISA_EXT_SIMPLE_CONFIG(zcmop, ZCMOP); KVM_ISA_EXT_SIMPLE_CONFIG(zfa, ZFA); KVM_ISA_EXT_SIMPLE_CONFIG(zfh, ZFH); -- 2.17.1

1 year, 1 month

3
2
0 0

[PATCH 0/1] Add KUnit tests for llist

by Artur Alves

Hi all, This is part of a hackathon organized by LKCAMP[1], focused on writing tests using KUnit. We reached out a while ago asking for advice on what would be a useful contribution[2] and ended up choosing data structures that did not yet have tests. This patch adds tests for the llist data structure, defined in include/linux/llist.h, and is inspired by the KUnit tests for the doubly linked list in lib/list-test.c[3]. [1] https://lkcamp.dev/about/ [2] https://lore.kernel.org/all/Zktnt7rjKryTh9-N@arch/ [3] https://elixir.bootlin.com/linux/latest/source/lib/list-test.c Artur Alves (1): lib/llist_kunit.c: add KUnit tests for llist lib/Kconfig.debug | 11 ++ lib/Makefile | 1 + lib/llist_kunit.c | 360 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 372 insertions(+) create mode 100644 lib/llist_kunit.c -- 2.45.2

1 year, 1 month

2
3
0 0

[PATCH 0/4] Introduce userspace-driven ALSA timers

by Ivan Orlov

There are multiple possible timer sources which could be useful for the sound stream synchronization: hrtimers, hardware clocks (e.g. PTP), timer wheels (jiffies). Currently, using one of them to synchronize the audio stream of snd-aloop module would require writing a kernel-space driver which exports an ALSA timer through the snd_timer interface. However, it is not really convenient for application developers, who may want to define their custom timer sources for audio synchronization. For instance, we could have a network application which receives frames and sends them to snd-aloop pcm device, and another application listening on the other end of snd-aloop. It makes sense to transfer a new period of data only when certain amount of frames is received through the network, but definitely not when a certain amount of jiffies on a local system elapses. Since all of the devices are purely virtual it won't introduce any glitches and will help the application developers to avoid using sample-rate conversion. This patch series introduces userspace-driven ALSA timers: virtual timers which are created and controlled from userspace. The timer can be created from the userspace using the new ioctl SNDRV_TIMER_IOCTL_CREATE. After creating a timer, it becomes available for use system-wide, so it can be passed to snd-aloop as a timer source (timer_source parameter would be "-1.SNDRV_TIMER_GLOBAL_UDRIVEN.{timer_id}"). When the userspace app decides to trigger a timer, it calls another ioctl SNDRV_TIMER_IOCTL_TRIGGER on the file descriptor of a timer. It initiates a transfer of a new period of data. Userspace-driven timers are associated with file descriptors. If the application wishes to destroy the timer, it can simply release the file descriptor of a virtual timer. I believe introducing new ioctl calls is quite inconvenient (as we have a limited amount of them), but other possible ways of app <-> kernel communication (like virtual FS) seem completely inappropriate for this task (but I'd love to discuss alternative solutions). This patch series also updates the snd-aloop module so the global timers can be used as a timer_source for it (it allows using userspace-driven timers as timer source). Ivan Orlov (4): ALSA: aloop: Allow using global timers Docs/sound: Add documentation for userspace-driven ALSA timers ALSA: timer: Introduce virtual userspace-driven timers selftests: ALSA: Cover userspace-driven timers with test Documentation/sound/index.rst | 1 + Documentation/sound/utimers.rst | 120 +++++++++++ include/uapi/sound/asound.h | 17 ++ sound/core/Kconfig | 11 + sound/core/timer.c | 226 ++++++++++++++++++++ sound/drivers/aloop.c | 2 + tools/testing/selftests/alsa/Makefile | 2 +- tools/testing/selftests/alsa/global-timer.c | 87 ++++++++ tools/testing/selftests/alsa/utimer-test.c | 133 ++++++++++++ 9 files changed, 598 insertions(+), 1 deletion(-) create mode 100644 Documentation/sound/utimers.rst create mode 100644 tools/testing/selftests/alsa/global-timer.c create mode 100644 tools/testing/selftests/alsa/utimer-test.c -- 2.34.1

1 year, 1 month

3
13
0 0

[PATCH AUTOSEL 5.4 2/6] selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT

by Sasha Levin

From: Yonghong Song <yonghong.song(a)linux.dev> [ Upstream commit 7015843afcaf68c132784c89528dfddc0005e483 ] Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT configs. In this particular case, the base VM is AMD with 166 cpus, and I run selftests with regular qemu on top of that and indeed send_signal test failed. I also tried with an Intel box with 80 cpus and there is no issue. The main qemu command line includes: -enable-kvm -smp 16 -cpu host The failure log looks like: $ ./test_progs -t send_signal [ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225] [ 48.503622] Modules linked in: bpf_testmod(O) [ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69 [ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290 [ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb [ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246 [ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0 [ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000 [ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000 [ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280 [ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000 [ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0 [ 48.537538] Call Trace: [ 48.537538] <IRQ> [ 48.537538] ? watchdog_timer_fn+0x1cd/0x250 [ 48.539590] ? lockup_detector_update_enable+0x50/0x50 [ 48.539590] ? __hrtimer_run_queues+0xff/0x280 [ 48.542520] ? hrtimer_interrupt+0x103/0x230 [ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140 [ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90 [ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.547612] ? handle_softirqs+0x71/0x290 [ 48.547612] irq_exit_rcu+0x63/0x80 [ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90 [ 48.552521] </IRQ> [ 48.553529] <TASK> [ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260 [ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74 [ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282 [ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620 [ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00 [ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000 [ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000 [ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00 [ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260 [ 48.576523] __schedule+0x364/0xac0 [ 48.577535] schedule+0x2e/0x110 [ 48.578555] pipe_read+0x301/0x400 [ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30 [ 48.579589] vfs_read+0x2b3/0x2f0 [ 48.579589] ksys_read+0x8b/0xc0 [ 48.583590] do_syscall_64+0x3d/0xc0 [ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 48.586525] RIP: 0033:0x7f2f28703fa1 [ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 [ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1 [ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006 [ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000 [ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0 [ 48.605527] </TASK> In the test, two processes are communicating through pipe. Further debugging with strace found that the above splat is triggered as read() syscall could not receive the data even if the corresponding write() syscall in another process successfully wrote data into the pipe. The failed subtest is "send_signal_perf". The corresponding perf event has sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every overflow event will trigger a call to the BPF program. So I suspect this may overwhelm the system. So I increased the sample_period to 100,000 and the test passed. The sample_period 10,000 still has the test failed. In other parts of selftest, e.g., [1], sample_freq is used instead. So I decided to use sample_freq = 1,000 since the test can pass as well. [1] https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org/ Reported-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Yonghong Song <yonghong.song(a)linux.dev> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Link: https://lore.kernel.org/bpf/20240605201203.2603846-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/prog_tests/send_signal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/send_signal.c b/tools/testing/selftests/bpf/prog_tests/send_signal.c index b607112c64e7a..281d097b4b76a 100644 --- a/tools/testing/selftests/bpf/prog_tests/send_signal.c +++ b/tools/testing/selftests/bpf/prog_tests/send_signal.c @@ -174,7 +174,8 @@ static void test_send_signal_tracepoint(void) static void test_send_signal_perf(void) { struct perf_event_attr attr = { - .sample_period = 1, + .freq = 1, + .sample_freq = 1000, .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_CLOCK, }; -- 2.43.0

1 year, 1 month

1
0
0 0

[PATCH AUTOSEL 5.10 2/6] selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT

by Sasha Levin

From: Yonghong Song <yonghong.song(a)linux.dev> [ Upstream commit 7015843afcaf68c132784c89528dfddc0005e483 ] Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT configs. In this particular case, the base VM is AMD with 166 cpus, and I run selftests with regular qemu on top of that and indeed send_signal test failed. I also tried with an Intel box with 80 cpus and there is no issue. The main qemu command line includes: -enable-kvm -smp 16 -cpu host The failure log looks like: $ ./test_progs -t send_signal [ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225] [ 48.503622] Modules linked in: bpf_testmod(O) [ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69 [ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290 [ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb [ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246 [ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0 [ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000 [ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000 [ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280 [ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000 [ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0 [ 48.537538] Call Trace: [ 48.537538] <IRQ> [ 48.537538] ? watchdog_timer_fn+0x1cd/0x250 [ 48.539590] ? lockup_detector_update_enable+0x50/0x50 [ 48.539590] ? __hrtimer_run_queues+0xff/0x280 [ 48.542520] ? hrtimer_interrupt+0x103/0x230 [ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140 [ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90 [ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.547612] ? handle_softirqs+0x71/0x290 [ 48.547612] irq_exit_rcu+0x63/0x80 [ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90 [ 48.552521] </IRQ> [ 48.553529] <TASK> [ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260 [ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74 [ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282 [ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620 [ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00 [ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000 [ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000 [ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00 [ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260 [ 48.576523] __schedule+0x364/0xac0 [ 48.577535] schedule+0x2e/0x110 [ 48.578555] pipe_read+0x301/0x400 [ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30 [ 48.579589] vfs_read+0x2b3/0x2f0 [ 48.579589] ksys_read+0x8b/0xc0 [ 48.583590] do_syscall_64+0x3d/0xc0 [ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 48.586525] RIP: 0033:0x7f2f28703fa1 [ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 [ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1 [ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006 [ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000 [ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0 [ 48.605527] </TASK> In the test, two processes are communicating through pipe. Further debugging with strace found that the above splat is triggered as read() syscall could not receive the data even if the corresponding write() syscall in another process successfully wrote data into the pipe. The failed subtest is "send_signal_perf". The corresponding perf event has sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every overflow event will trigger a call to the BPF program. So I suspect this may overwhelm the system. So I increased the sample_period to 100,000 and the test passed. The sample_period 10,000 still has the test failed. In other parts of selftest, e.g., [1], sample_freq is used instead. So I decided to use sample_freq = 1,000 since the test can pass as well. [1] https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org/ Reported-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Yonghong Song <yonghong.song(a)linux.dev> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Link: https://lore.kernel.org/bpf/20240605201203.2603846-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/prog_tests/send_signal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/send_signal.c b/tools/testing/selftests/bpf/prog_tests/send_signal.c index 75b72c751772b..0b6349070824b 100644 --- a/tools/testing/selftests/bpf/prog_tests/send_signal.c +++ b/tools/testing/selftests/bpf/prog_tests/send_signal.c @@ -155,7 +155,8 @@ static void test_send_signal_tracepoint(bool signal_thread) static void test_send_signal_perf(bool signal_thread) { struct perf_event_attr attr = { - .sample_period = 1, + .freq = 1, + .sample_freq = 1000, .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_CLOCK, }; -- 2.43.0

1 year, 1 month

1
0
0 0

[PATCH AUTOSEL 5.15 2/6] selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT

by Sasha Levin

From: Yonghong Song <yonghong.song(a)linux.dev> [ Upstream commit 7015843afcaf68c132784c89528dfddc0005e483 ] Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT configs. In this particular case, the base VM is AMD with 166 cpus, and I run selftests with regular qemu on top of that and indeed send_signal test failed. I also tried with an Intel box with 80 cpus and there is no issue. The main qemu command line includes: -enable-kvm -smp 16 -cpu host The failure log looks like: $ ./test_progs -t send_signal [ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225] [ 48.503622] Modules linked in: bpf_testmod(O) [ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69 [ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290 [ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb [ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246 [ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0 [ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000 [ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000 [ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280 [ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000 [ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0 [ 48.537538] Call Trace: [ 48.537538] <IRQ> [ 48.537538] ? watchdog_timer_fn+0x1cd/0x250 [ 48.539590] ? lockup_detector_update_enable+0x50/0x50 [ 48.539590] ? __hrtimer_run_queues+0xff/0x280 [ 48.542520] ? hrtimer_interrupt+0x103/0x230 [ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140 [ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90 [ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.547612] ? handle_softirqs+0x71/0x290 [ 48.547612] irq_exit_rcu+0x63/0x80 [ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90 [ 48.552521] </IRQ> [ 48.553529] <TASK> [ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260 [ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74 [ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282 [ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620 [ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00 [ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000 [ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000 [ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00 [ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260 [ 48.576523] __schedule+0x364/0xac0 [ 48.577535] schedule+0x2e/0x110 [ 48.578555] pipe_read+0x301/0x400 [ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30 [ 48.579589] vfs_read+0x2b3/0x2f0 [ 48.579589] ksys_read+0x8b/0xc0 [ 48.583590] do_syscall_64+0x3d/0xc0 [ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 48.586525] RIP: 0033:0x7f2f28703fa1 [ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 [ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1 [ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006 [ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000 [ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0 [ 48.605527] </TASK> In the test, two processes are communicating through pipe. Further debugging with strace found that the above splat is triggered as read() syscall could not receive the data even if the corresponding write() syscall in another process successfully wrote data into the pipe. The failed subtest is "send_signal_perf". The corresponding perf event has sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every overflow event will trigger a call to the BPF program. So I suspect this may overwhelm the system. So I increased the sample_period to 100,000 and the test passed. The sample_period 10,000 still has the test failed. In other parts of selftest, e.g., [1], sample_freq is used instead. So I decided to use sample_freq = 1,000 since the test can pass as well. [1] https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org/ Reported-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Yonghong Song <yonghong.song(a)linux.dev> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Link: https://lore.kernel.org/bpf/20240605201203.2603846-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/prog_tests/send_signal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/send_signal.c b/tools/testing/selftests/bpf/prog_tests/send_signal.c index 776916b61c406..7b1343f70e65a 100644 --- a/tools/testing/selftests/bpf/prog_tests/send_signal.c +++ b/tools/testing/selftests/bpf/prog_tests/send_signal.c @@ -149,7 +149,8 @@ static void test_send_signal_tracepoint(bool signal_thread) static void test_send_signal_perf(bool signal_thread) { struct perf_event_attr attr = { - .sample_period = 1, + .freq = 1, + .sample_freq = 1000, .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_CLOCK, }; -- 2.43.0

1 year, 1 month

1
0
0 0

[PATCH AUTOSEL 6.1 04/11] selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT

by Sasha Levin

From: Yonghong Song <yonghong.song(a)linux.dev> [ Upstream commit 7015843afcaf68c132784c89528dfddc0005e483 ] Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT configs. In this particular case, the base VM is AMD with 166 cpus, and I run selftests with regular qemu on top of that and indeed send_signal test failed. I also tried with an Intel box with 80 cpus and there is no issue. The main qemu command line includes: -enable-kvm -smp 16 -cpu host The failure log looks like: $ ./test_progs -t send_signal [ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225] [ 48.503622] Modules linked in: bpf_testmod(O) [ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69 [ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290 [ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb [ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246 [ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0 [ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000 [ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000 [ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280 [ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000 [ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0 [ 48.537538] Call Trace: [ 48.537538] <IRQ> [ 48.537538] ? watchdog_timer_fn+0x1cd/0x250 [ 48.539590] ? lockup_detector_update_enable+0x50/0x50 [ 48.539590] ? __hrtimer_run_queues+0xff/0x280 [ 48.542520] ? hrtimer_interrupt+0x103/0x230 [ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140 [ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90 [ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.547612] ? handle_softirqs+0x71/0x290 [ 48.547612] irq_exit_rcu+0x63/0x80 [ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90 [ 48.552521] </IRQ> [ 48.553529] <TASK> [ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260 [ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74 [ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282 [ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620 [ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00 [ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000 [ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000 [ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00 [ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260 [ 48.576523] __schedule+0x364/0xac0 [ 48.577535] schedule+0x2e/0x110 [ 48.578555] pipe_read+0x301/0x400 [ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30 [ 48.579589] vfs_read+0x2b3/0x2f0 [ 48.579589] ksys_read+0x8b/0xc0 [ 48.583590] do_syscall_64+0x3d/0xc0 [ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 48.586525] RIP: 0033:0x7f2f28703fa1 [ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 [ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1 [ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006 [ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000 [ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0 [ 48.605527] </TASK> In the test, two processes are communicating through pipe. Further debugging with strace found that the above splat is triggered as read() syscall could not receive the data even if the corresponding write() syscall in another process successfully wrote data into the pipe. The failed subtest is "send_signal_perf". The corresponding perf event has sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every overflow event will trigger a call to the BPF program. So I suspect this may overwhelm the system. So I increased the sample_period to 100,000 and the test passed. The sample_period 10,000 still has the test failed. In other parts of selftest, e.g., [1], sample_freq is used instead. So I decided to use sample_freq = 1,000 since the test can pass as well. [1] https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org/ Reported-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Yonghong Song <yonghong.song(a)linux.dev> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Link: https://lore.kernel.org/bpf/20240605201203.2603846-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/prog_tests/send_signal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/send_signal.c b/tools/testing/selftests/bpf/prog_tests/send_signal.c index d63a20fbed339..210b806351bcf 100644 --- a/tools/testing/selftests/bpf/prog_tests/send_signal.c +++ b/tools/testing/selftests/bpf/prog_tests/send_signal.c @@ -152,7 +152,8 @@ static void test_send_signal_tracepoint(bool signal_thread) static void test_send_signal_perf(bool signal_thread) { struct perf_event_attr attr = { - .sample_period = 1, + .freq = 1, + .sample_freq = 1000, .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_CLOCK, }; -- 2.43.0

1 year, 1 month

1
0
0 0

[PATCH AUTOSEL 6.6 05/15] selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT

by Sasha Levin

From: Yonghong Song <yonghong.song(a)linux.dev> [ Upstream commit 7015843afcaf68c132784c89528dfddc0005e483 ] Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT configs. In this particular case, the base VM is AMD with 166 cpus, and I run selftests with regular qemu on top of that and indeed send_signal test failed. I also tried with an Intel box with 80 cpus and there is no issue. The main qemu command line includes: -enable-kvm -smp 16 -cpu host The failure log looks like: $ ./test_progs -t send_signal [ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225] [ 48.503622] Modules linked in: bpf_testmod(O) [ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69 [ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290 [ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb [ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246 [ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0 [ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000 [ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000 [ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280 [ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000 [ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0 [ 48.537538] Call Trace: [ 48.537538] <IRQ> [ 48.537538] ? watchdog_timer_fn+0x1cd/0x250 [ 48.539590] ? lockup_detector_update_enable+0x50/0x50 [ 48.539590] ? __hrtimer_run_queues+0xff/0x280 [ 48.542520] ? hrtimer_interrupt+0x103/0x230 [ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140 [ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90 [ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.547612] ? handle_softirqs+0x71/0x290 [ 48.547612] irq_exit_rcu+0x63/0x80 [ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90 [ 48.552521] </IRQ> [ 48.553529] <TASK> [ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260 [ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74 [ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282 [ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620 [ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00 [ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000 [ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000 [ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00 [ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260 [ 48.576523] __schedule+0x364/0xac0 [ 48.577535] schedule+0x2e/0x110 [ 48.578555] pipe_read+0x301/0x400 [ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30 [ 48.579589] vfs_read+0x2b3/0x2f0 [ 48.579589] ksys_read+0x8b/0xc0 [ 48.583590] do_syscall_64+0x3d/0xc0 [ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 48.586525] RIP: 0033:0x7f2f28703fa1 [ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 [ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1 [ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006 [ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000 [ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0 [ 48.605527] </TASK> In the test, two processes are communicating through pipe. Further debugging with strace found that the above splat is triggered as read() syscall could not receive the data even if the corresponding write() syscall in another process successfully wrote data into the pipe. The failed subtest is "send_signal_perf". The corresponding perf event has sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every overflow event will trigger a call to the BPF program. So I suspect this may overwhelm the system. So I increased the sample_period to 100,000 and the test passed. The sample_period 10,000 still has the test failed. In other parts of selftest, e.g., [1], sample_freq is used instead. So I decided to use sample_freq = 1,000 since the test can pass as well. [1] https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org/ Reported-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Yonghong Song <yonghong.song(a)linux.dev> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Link: https://lore.kernel.org/bpf/20240605201203.2603846-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/prog_tests/send_signal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/send_signal.c b/tools/testing/selftests/bpf/prog_tests/send_signal.c index b15b343ebb6b1..9adcda7f1fedc 100644 --- a/tools/testing/selftests/bpf/prog_tests/send_signal.c +++ b/tools/testing/selftests/bpf/prog_tests/send_signal.c @@ -156,7 +156,8 @@ static void test_send_signal_tracepoint(bool signal_thread) static void test_send_signal_perf(bool signal_thread) { struct perf_event_attr attr = { - .sample_period = 1, + .freq = 1, + .sample_freq = 1000, .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_CLOCK, }; -- 2.43.0

1 year, 1 month

1
0
0 0

[PATCH AUTOSEL 6.10 07/27] selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT

by Sasha Levin

From: Yonghong Song <yonghong.song(a)linux.dev> [ Upstream commit 7015843afcaf68c132784c89528dfddc0005e483 ] Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT configs. In this particular case, the base VM is AMD with 166 cpus, and I run selftests with regular qemu on top of that and indeed send_signal test failed. I also tried with an Intel box with 80 cpus and there is no issue. The main qemu command line includes: -enable-kvm -smp 16 -cpu host The failure log looks like: $ ./test_progs -t send_signal [ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225] [ 48.503622] Modules linked in: bpf_testmod(O) [ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69 [ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290 [ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb [ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246 [ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0 [ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000 [ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000 [ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280 [ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000 [ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0 [ 48.537538] Call Trace: [ 48.537538] <IRQ> [ 48.537538] ? watchdog_timer_fn+0x1cd/0x250 [ 48.539590] ? lockup_detector_update_enable+0x50/0x50 [ 48.539590] ? __hrtimer_run_queues+0xff/0x280 [ 48.542520] ? hrtimer_interrupt+0x103/0x230 [ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140 [ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90 [ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.547612] ? handle_softirqs+0x71/0x290 [ 48.547612] irq_exit_rcu+0x63/0x80 [ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90 [ 48.552521] </IRQ> [ 48.553529] <TASK> [ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260 [ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74 [ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282 [ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620 [ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00 [ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000 [ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000 [ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00 [ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260 [ 48.576523] __schedule+0x364/0xac0 [ 48.577535] schedule+0x2e/0x110 [ 48.578555] pipe_read+0x301/0x400 [ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30 [ 48.579589] vfs_read+0x2b3/0x2f0 [ 48.579589] ksys_read+0x8b/0xc0 [ 48.583590] do_syscall_64+0x3d/0xc0 [ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 48.586525] RIP: 0033:0x7f2f28703fa1 [ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 [ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1 [ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006 [ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000 [ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0 [ 48.605527] </TASK> In the test, two processes are communicating through pipe. Further debugging with strace found that the above splat is triggered as read() syscall could not receive the data even if the corresponding write() syscall in another process successfully wrote data into the pipe. The failed subtest is "send_signal_perf". The corresponding perf event has sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every overflow event will trigger a call to the BPF program. So I suspect this may overwhelm the system. So I increased the sample_period to 100,000 and the test passed. The sample_period 10,000 still has the test failed. In other parts of selftest, e.g., [1], sample_freq is used instead. So I decided to use sample_freq = 1,000 since the test can pass as well. [1] https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org/ Reported-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Yonghong Song <yonghong.song(a)linux.dev> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Link: https://lore.kernel.org/bpf/20240605201203.2603846-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/prog_tests/send_signal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/send_signal.c b/tools/testing/selftests/bpf/prog_tests/send_signal.c index 920aee41bd58c..6cc69900b3106 100644 --- a/tools/testing/selftests/bpf/prog_tests/send_signal.c +++ b/tools/testing/selftests/bpf/prog_tests/send_signal.c @@ -156,7 +156,8 @@ static void test_send_signal_tracepoint(bool signal_thread) static void test_send_signal_perf(bool signal_thread) { struct perf_event_attr attr = { - .sample_period = 1, + .freq = 1, + .sample_freq = 1000, .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_CLOCK, }; -- 2.43.0

1 year, 1 month

1
0
0 0

Re: [syzbot] [net?] INFO: rcu detected stall in ipv6_rcv (4)

by syzbot

syzbot suspects this issue was fixed by commit: commit fb66df20a7201e60f2b13d7f95d031b31a8831d3 Author: Vladimir Oltean <vladimir.oltean(a)nxp.com> Date: Mon May 27 15:39:55 2024 +0000 net/sched: taprio: extend minimum interval restriction to entire cycle too bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=179b2623980000 start commit: 2cf4f94d8e86 Merge tag 'scsi-fixes' of git://git.kernel.or.. git tree: upstream kernel config: https://syzkaller.appspot.com/x/.config?x=314e9ad033a7d3a7 dashboard link: https://syzkaller.appspot.com/bug?extid=d9b3e95a78490389cfb7 syz repro: https://syzkaller.appspot.com/x/repro.syz?x=1487fc06e80000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=11e5b4d6e80000 If the result looks correct, please mark the issue as fixed by replying with: #syz fix: net/sched: taprio: extend minimum interval restriction to entire cycle too For information about bisection process see: https://goo.gl/tpsmEJ#bisection

1 year, 1 month

1
0
0 0

[PATCH 0/3] selftests/bpf: convert test_dev_cgroup to test_progs

by Alexis Lothoré (eBPF Foundation)

Hello, this small series aims to integrate test_dev_cgroup in test_progs so it could be run automatically in CI. The new version brings a few differences with the current one: - test now uses directly syscalls instead of wrapping commandline tools into system() calls - test_progs manipulates /dev/null (eg: redirecting test logs into it), so disabling access to it in the bpf program confuses the tests. To fix this, the first commit modifies the bpf program to allow access to char devices 1:3 (/dev/null), and disable access to char devices 1:5 (/dev/zero) - once test is converted, add a small subtest to also check for device type interpretation (char or block) - paths used in mknod tests are now in /dev instead of /tmp: due to the CI runner organisation and mountpoints manipulations, trying to create nodes in /tmp leads to errors unrelated to the test (ie, mknod calls refused by kernel, not the bpf program). I don't understand exactly the root cause at the deepest point (all I see in CI is an -ENXIO error on mknod when trying to create the node in tmp, and I can not make sense out of it neither replicate it locally), so I would gladly take inputs from anyone more educated than me about this. The new test_progs part has been tested in a local qemu environment as well as in upstream CI: ./test_progs -a cgroup_dev 47/1 cgroup_dev/deny-mknod:OK 47/2 cgroup_dev/allow-mknod:OK 47/3 cgroup_dev/deny-mknod-wrong-type:OK 47/4 cgroup_dev/allow-read:OK 47/5 cgroup_dev/allow-write:OK 47/6 cgroup_dev/deny-read:OK 47/7 cgroup_dev/deny-write:OK 47 cgroup_dev:OK Summary: 1/7 PASSED, 0 SKIPPED, 0 FAILED --- Alexis Lothoré (eBPF Foundation) (3): selftests/bpf: do not disable /dev/null device access in cgroup dev test selftests/bpf: convert test_dev_cgroup to test_progs selftests/bpf: add wrong type test to cgroup dev tools/testing/selftests/bpf/.gitignore | 1 - tools/testing/selftests/bpf/Makefile | 2 - .../testing/selftests/bpf/prog_tests/cgroup_dev.c | 123 +++++++++++++++++++++ tools/testing/selftests/bpf/progs/dev_cgroup.c | 4 +- tools/testing/selftests/bpf/test_dev_cgroup.c | 85 -------------- 5 files changed, 125 insertions(+), 90 deletions(-) --- base-commit: c90e2d4a7738a24fbb3657092dbd1ca20c040ed1 change-id: 20240723-convert_dev_cgroup-6464b0d37f1a Best regards, -- Alexis Lothoré, Bootlin Embedded Linux and Kernel engineering https://bootlin.com

1 year, 1 month

3
7
0 0

[PATCH v5] tools/testing:Fix the wrong format specifier

by Zhu Jun

The format specifier in fprintf is "%u", that "%u" should use unsigned int type instead.the problem is discovered by reading code. Signed-off-by: Zhu Jun <zhujun2(a)cmss.chinamobile.com> --- v1->v2: modify commit info add how to find the problem in the log v2->v3: Seems this can use macro WTERMSIG like those above usage, rather than changing the print format. v3->v4: Now the commit summary doesn't match the change you are making. Also WTERMSIG() is incorrect for this conditional code path. See comments below in the code path. I would leave the v2 code intact. How are you testing this change? Please include the details in the change log. v4->v5: Compile the kernel for testing using make tools/testing/selftests/kselftest_harness.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index e05ac8261046..675b8f43e148 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -910,7 +910,7 @@ void __wait_for_test(struct __test_metadata *t) .sa_flags = SA_SIGINFO, }; struct sigaction saved_action; - int status; + unsigned int status; if (sigaction(SIGALRM, &action, &saved_action)) { t->passed = 0; -- 2.17.1

1 year, 1 month

3
2
0 0

Testing Quality Call notes - 2024-07-25

by Laura Nao

Hello, KernelCI is hosting a bi-weekly call on Thursday to discuss improvements to existing upstream tests, the development of new tests to increase kernel testing coverage, and the enablement of these tests in KernelCI. In recent months, we at Collabora have focused on various kernel areas, assessing the tests already available upstream and contributing patches to make them easily runnable in CIs. Below is a list of the tests we've been working on and their latest status updates, as discussed in the last meeting held on 2024-07-25: *USB/PCI devices kselftest* - Upstream test to detect unprobed devices on discoverable buses: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… - Test location changed (https://lore.kernel.org/all/20240705-dev-err-log-selftest-v2-1-163b9cd7b3c1…), updated KernelCI PRs accordingly: https://github.com/kernelci/kernelci-core/pull/2577 and https://github.com/kernelci/kernelci-pipeline/pull/642 - Will need to figure out how to structure the files to ensure scalability. A YAML schema would be useful too. *Error log test* - Proposing new kselftest to report device log errors: https://lore.kernel.org/all/20240423-dev-err-log-selftest-v1-0-690c1741d68b… - Now merged upstream *Missing devices kselftest* - Proposing new kselftest to report devices that go missing in the system: https://lore.kernel.org/all/20240724-kselftest-dev-exist-v1-1-9bc21aa761b5@… - The test checks the number of devices present against a reference file, generated by the program at a previous point on a known-good kernel, and reports any missing device. - Helps identifying missing kernel configs or broken driver features *Suspend/resume in cpufreq kselftest* - Enabling suspend/resume test within the cpufreq kselftest in KernelCI - Sent v2 for patch adding RTC wakeup alarm in the cpufreq kselftest: https://lore.kernel.org/lkml/20240715192634.19272-1-shreeya.patel@collabora… - The test now uses rtcwake, as suggested by Rafael J. Wysocki in the first review. There's no easy way to declare the dependency in the kselftest itself. - Patch got acked by the cpufreq kselftest author Viresh Kumar *Boot time test* - Sent first RFC: https://lore.kernel.org/all/20240725110622.96301-1-laura.nao@collabora.com/… *TAP conformance in kselftests* - Ongoing discussion upstream on TAP headers: https://lore.kernel.org/all/87fbfba4-8d4d-44ff-9fe5-e101cce3d6cb@collabora.… - Working to convert test modules used by kselftests into kunit. Cleanup patches sent: https://lore.kernel.org/all/20240725110817.659099-1-usama.anjum@collabora.c… and https://lore.kernel.org/all/20240725121212.808206-1-usama.anjum@collabora.c… Please reply to this thread if you'd like to join the call or discuss any of the topics further. We look forward to collaborating with the community to improve upstream tests and expand coverage to more areas of interest within the kernel. Best regards, Laura Nao

1 year, 1 month

1
0
0 0

[PATCH v8 5/5] KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test

by Yong-Xuan Wang

Update the get-reg-list test to test the Svade and Svadu Extensions are available for guest OS. Signed-off-by: Yong-Xuan Wang <yongxuan.wang(a)sifive.com> Reviewed-by: Andrew Jones <ajones(a)ventanamicro.com> --- tools/testing/selftests/kvm/riscv/get-reg-list.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/tools/testing/selftests/kvm/riscv/get-reg-list.c b/tools/testing/selftests/kvm/riscv/get-reg-list.c index 8e34f7fa44e9..aac40652e181 100644 --- a/tools/testing/selftests/kvm/riscv/get-reg-list.c +++ b/tools/testing/selftests/kvm/riscv/get-reg-list.c @@ -45,6 +45,8 @@ bool filter_reg(__u64 reg) case KVM_REG_RISCV_ISA_EXT | KVM_REG_RISCV_ISA_SINGLE | KVM_RISCV_ISA_EXT_SSAIA: case KVM_REG_RISCV_ISA_EXT | KVM_REG_RISCV_ISA_SINGLE | KVM_RISCV_ISA_EXT_SSCOFPMF: case KVM_REG_RISCV_ISA_EXT | KVM_REG_RISCV_ISA_SINGLE | KVM_RISCV_ISA_EXT_SSTC: + case KVM_REG_RISCV_ISA_EXT | KVM_REG_RISCV_ISA_SINGLE | KVM_RISCV_ISA_EXT_SVADE: + case KVM_REG_RISCV_ISA_EXT | KVM_REG_RISCV_ISA_SINGLE | KVM_RISCV_ISA_EXT_SVADU: case KVM_REG_RISCV_ISA_EXT | KVM_REG_RISCV_ISA_SINGLE | KVM_RISCV_ISA_EXT_SVINVAL: case KVM_REG_RISCV_ISA_EXT | KVM_REG_RISCV_ISA_SINGLE | KVM_RISCV_ISA_EXT_SVNAPOT: case KVM_REG_RISCV_ISA_EXT | KVM_REG_RISCV_ISA_SINGLE | KVM_RISCV_ISA_EXT_SVPBMT: @@ -418,6 +420,8 @@ static const char *isa_ext_single_id_to_str(__u64 reg_off) KVM_ISA_EXT_ARR(SSAIA), KVM_ISA_EXT_ARR(SSCOFPMF), KVM_ISA_EXT_ARR(SSTC), + KVM_ISA_EXT_ARR(SVADE), + KVM_ISA_EXT_ARR(SVADU), KVM_ISA_EXT_ARR(SVINVAL), KVM_ISA_EXT_ARR(SVNAPOT), KVM_ISA_EXT_ARR(SVPBMT), @@ -949,6 +953,8 @@ KVM_ISA_EXT_SIMPLE_CONFIG(h, H); KVM_ISA_EXT_SUBLIST_CONFIG(smstateen, SMSTATEEN); KVM_ISA_EXT_SIMPLE_CONFIG(sscofpmf, SSCOFPMF); KVM_ISA_EXT_SIMPLE_CONFIG(sstc, SSTC); +KVM_ISA_EXT_SIMPLE_CONFIG(svade, SVADE); +KVM_ISA_EXT_SIMPLE_CONFIG(svadu, SVADU); KVM_ISA_EXT_SIMPLE_CONFIG(svinval, SVINVAL); KVM_ISA_EXT_SIMPLE_CONFIG(svnapot, SVNAPOT); KVM_ISA_EXT_SIMPLE_CONFIG(svpbmt, SVPBMT); @@ -1012,6 +1018,8 @@ struct vcpu_reg_list *vcpu_configs[] = { &config_smstateen, &config_sscofpmf, &config_sstc, + &config_svade, + &config_svadu, &config_svinval, &config_svnapot, &config_svpbmt, -- 2.17.1

1 year, 1 month

1
0
0 0

[PATCH net] virtio: fix GSO with frames unaligned to size

by Jakub Kicinski

The commit under fixes added a questionable check to virtio_net_hdr_to_skb(). I'm guessing the check was supposed to protect from csum offset being outside of a segment (especially if len is not multiple of segment size). The condition can't be right, tho, as it breaks previously working sending of GSO frames with only one segment (i.e. when gso_size <= len we silently ignore the GSO request and send a single non-GSO frame). Fix the logic and move it to the GSO part. This has been caught by net/tap and net/psock_send.sh tests. Fixes: e269d79c7d35 ("net: missing check virtio") Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: willemdebruijn.kernel(a)gmail.com CC: mst(a)redhat.com CC: jasowang(a)redhat.com CC: xuanzhuo(a)linux.alibaba.com CC: eperezma(a)redhat.com CC: shuah(a)kernel.org CC: arefev(a)swemel.ru CC: virtualization(a)lists.linux.dev CC: linux-kselftest(a)vger.kernel.org --- include/linux/virtio_net.h | 27 ++++++++++++++++----------- tools/testing/selftests/net/tap.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+), 11 deletions(-) diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index d1d7825318c3..c54b7aa42921 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -52,11 +52,11 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb, bool little_endian) { unsigned int nh_min_len = sizeof(struct iphdr); + unsigned int csum_needed = 0; unsigned int gso_type = 0; unsigned int thlen = 0; unsigned int p_off = 0; unsigned int ip_proto; - u64 ret, remainder, gso_size; if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) { switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { @@ -99,16 +99,6 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb, u32 off = __virtio16_to_cpu(little_endian, hdr->csum_offset); u32 needed = start + max_t(u32, thlen, off + sizeof(__sum16)); - if (hdr->gso_size) { - gso_size = __virtio16_to_cpu(little_endian, hdr->gso_size); - ret = div64_u64_rem(skb->len, gso_size, &remainder); - if (!(ret && (hdr->gso_size > needed) && - ((remainder > needed) || (remainder == 0)))) { - return -EINVAL; - } - skb_shinfo(skb)->tx_flags |= SKBFL_SHARED_FRAG; - } - if (!pskb_may_pull(skb, needed)) return -EINVAL; @@ -119,6 +109,8 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb, p_off = nh_min_len + thlen; if (!pskb_may_pull(skb, p_off)) return -EINVAL; + + csum_needed = needed; } else { /* gso packets without NEEDS_CSUM do not set transport_offset. * probe and drop if does not match one of the above types. @@ -188,6 +180,19 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb, if (gso_size == GSO_BY_FRAGS) return -EINVAL; + if (csum_needed) { + unsigned int p_rem, p_size; + + p_size = gso_size; + p_rem = (skb->len - nh_off) % gso_size; + if (p_rem) + p_size = p_rem; + + /* Make sure csum still within packet after GSO */ + if (p_size + nh_off < csum_needed) + return -EINVAL; + } + /* Too small packets are not really GSO ones. */ if (skb->len - nh_off > gso_size) { shinfo->gso_size = gso_size; diff --git a/tools/testing/selftests/net/tap.c b/tools/testing/selftests/net/tap.c index 247c3b3ac1c9..8527d51449cf 100644 --- a/tools/testing/selftests/net/tap.c +++ b/tools/testing/selftests/net/tap.c @@ -418,6 +418,36 @@ TEST_F(tap, test_packet_valid_udp_csum) ASSERT_EQ(ret, off); } +TEST_F(tap, test_packet_invalid_udp_gso_csum) +{ + uint8_t pkt[TEST_PACKET_SZ]; + uint16_t payload; + size_t off; + int ret; + int i; + + payload = ETH_DATA_LEN - sizeof(struct iphdr) - sizeof(struct udphdr); + + memset(pkt, 0, sizeof(pkt)); + off = build_test_packet_valid_udp_gso(pkt, payload); + + for (i = -16; i < 16; i++) { + ret = write(self->fd, pkt, off + i); + + if (i <= 0 || + i > __builtin_offsetof(struct udphdr, check) + 1) { + EXPECT_EQ(ret, off + i) + TH_LOG("mismatch with offset: %d (%zd)", + i, off + i); + } else { + EXPECT_EQ(ret, -1) + TH_LOG("mismatch with offset: %d (%zd)", + i, off + i); + EXPECT_EQ(errno, 22); + } + } +} + TEST_F(tap, test_packet_crash_tap_invalid_eth_proto) { uint8_t pkt[TEST_PACKET_SZ]; -- 2.45.2

1 year, 1 month

3
7
0 0

[PATCH v8 00/13] riscv: Add support for xtheadvector

by Charlie Jenkins

xtheadvector is a custom extension that is based upon riscv vector version 0.7.1 [1]. All of the vector routines have been modified to support this alternative vector version based upon whether xtheadvector was determined to be supported at boot. vlenb is not supported on the existing xtheadvector hardware, so a devicetree property thead,vlenb is added to provide the vlenb to Linux. There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is used to request which thead vendor extensions are supported on the current platform. This allows future vendors to allocate hwprobe keys for their vendor. Support for xtheadvector is also added to the vector kselftests. Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> [1] https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361… --- This series is a continuation of a different series that was fragmented into two other series in an attempt to get part of it merged in the 6.10 merge window. The split-off series did not get merged due to a NAK on the series that added the generic riscv,vlenb devicetree entry. This series has converted riscv,vlenb to thead,vlenb to remedy this issue. The original series is titled "riscv: Support vendor extensions and xtheadvector" [3]. The series titled "riscv: Extend cpufeature.c to detect vendor extensions" is still under development and this series is based on that series! [4] I have tested this with an Allwinner Nezha board. I ran into issues booting the board after 6.9-rc1 so I applied these patches to 6.8. There are a couple of minor merge conflicts that do arrise when doing that, so please let me know if you have been able to boot this board with a 6.9 kernel. I used SkiffOS [1] to manage building the image, but upgraded the U-Boot version to Samuel Holland's more up-to-date version [2] and changed out the device tree used by U-Boot with the device trees that are present in upstream linux and this series. Thank you Samuel for all of the work you did to make this task possible. [1] https://github.com/skiffos/SkiffOS/tree/master/configs/allwinner/nezha [2] https://github.com/smaeul/u-boot/commit/2e89b706f5c956a70c989cd31665f1429e9… [3] https://lore.kernel.org/all/20240503-dev-charlie-support_thead_vector_6_9-v… [4] https://lore.kernel.org/lkml/20240719-support_vendor_extensions-v3-4-0af758… --- Changes in v8: - Rebase onto palmer's for-next - Link to v7: https://lore.kernel.org/r/20240724-xtheadvector-v7-0-b741910ada3e@rivosinc.… Changes in v7: - Add defs for has_xtheadvector_no_alternatives() and has_xtheadvector() when vector disabled. (Palmer) - Link to v6: https://lore.kernel.org/r/20240722-xtheadvector-v6-0-c9af0130fa00@rivosinc.… Changes in v6: - Fix return type of is_vector_supported()/is_xthead_supported() to be bool - Link to v5: https://lore.kernel.org/r/20240719-xtheadvector-v5-0-4b485fc7d55f@rivosinc.… Changes in v5: - Rebase on for-next - Link to v4: https://lore.kernel.org/r/20240702-xtheadvector-v4-0-2bad6820db11@rivosinc.… Changes in v4: - Replace inline asm with C (Samuel) - Rename VCSRs to CSRs (Samuel) - Replace .insn directives with .4byte directives - Link to v3: https://lore.kernel.org/r/20240619-xtheadvector-v3-0-bff39eb9668e@rivosinc.… Changes in v3: - Add back Heiko's signed-off-by (Conor) - Mark RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 as a bitmask - Link to v2: https://lore.kernel.org/r/20240610-xtheadvector-v2-0-97a48613ad64@rivosinc.… Changes in v2: - Removed extraneous references to "riscv,vlenb" (Jess) - Moved declaration of "thead,vlenb" into cpus.yaml and added restriction that it's only applicable to thead cores (Conor) - Check CONFIG_RISCV_ISA_XTHEADVECTOR instead of CONFIG_RISCV_ISA_V for thead,vlenb (Jess) - Fix naming of hwprobe variables (Evan) - Link to v1: https://lore.kernel.org/r/20240609-xtheadvector-v1-0-3fe591d7f109@rivosinc.… --- Charlie Jenkins (12): dt-bindings: riscv: Add xtheadvector ISA extension description dt-bindings: cpus: add a thead vlen register length property riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree riscv: Add thead and xtheadvector as a vendor extension riscv: vector: Use vlenb from DT for thead riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT riscv: Add xtheadvector instruction definitions riscv: vector: Support xtheadvector save/restore riscv: hwprobe: Add thead vendor extension probing riscv: hwprobe: Document thead vendor extensions and xtheadvector extension selftests: riscv: Fix vector tests selftests: riscv: Support xtheadvector in vector tests Heiko Stuebner (1): RISC-V: define the elements of the VCSR vector CSR Documentation/arch/riscv/hwprobe.rst | 10 + Documentation/devicetree/bindings/riscv/cpus.yaml | 19 ++ .../devicetree/bindings/riscv/extensions.yaml | 10 + arch/riscv/Kconfig.vendor | 26 ++ arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 3 +- arch/riscv/include/asm/cpufeature.h | 2 + arch/riscv/include/asm/csr.h | 15 ++ arch/riscv/include/asm/hwprobe.h | 3 +- arch/riscv/include/asm/switch_to.h | 2 +- arch/riscv/include/asm/vector.h | 225 ++++++++++++---- arch/riscv/include/asm/vendor_extensions/thead.h | 42 +++ .../include/asm/vendor_extensions/thead_hwprobe.h | 18 ++ .../include/asm/vendor_extensions/vendor_hwprobe.h | 37 +++ arch/riscv/include/uapi/asm/hwprobe.h | 3 +- arch/riscv/include/uapi/asm/vendor/thead.h | 3 + arch/riscv/kernel/cpufeature.c | 51 +++- arch/riscv/kernel/kernel_mode_vector.c | 8 +- arch/riscv/kernel/process.c | 4 +- arch/riscv/kernel/signal.c | 6 +- arch/riscv/kernel/sys_hwprobe.c | 5 + arch/riscv/kernel/vector.c | 24 +- arch/riscv/kernel/vendor_extensions.c | 10 + arch/riscv/kernel/vendor_extensions/Makefile | 2 + arch/riscv/kernel/vendor_extensions/thead.c | 18 ++ .../riscv/kernel/vendor_extensions/thead_hwprobe.c | 19 ++ tools/testing/selftests/riscv/vector/.gitignore | 3 +- tools/testing/selftests/riscv/vector/Makefile | 17 +- .../selftests/riscv/vector/v_exec_initval_nolibc.c | 93 +++++++ tools/testing/selftests/riscv/vector/v_helpers.c | 68 +++++ tools/testing/selftests/riscv/vector/v_helpers.h | 8 + tools/testing/selftests/riscv/vector/v_initval.c | 22 ++ .../selftests/riscv/vector/v_initval_nolibc.c | 68 ----- .../selftests/riscv/vector/vstate_exec_nolibc.c | 20 +- .../testing/selftests/riscv/vector/vstate_prctl.c | 295 ++++++++++++--------- 34 files changed, 890 insertions(+), 269 deletions(-) --- base-commit: 2709e400c2e06ddae9ad120f301a5254f629cf3e change-id: 20240530-xtheadvector-833d3d17b423 -- - Charlie

1 year, 1 month

2
14
0 0

[PATCH v2] kselftest: cpufreq: Add RTC wakeup alarm

by Shreeya Patel

Add RTC wakeup alarm for devices to resume after specific time interval. This improvement in the test will help in enabling this test in the CI systems and will eliminate the need of manual intervention for resuming back the devices after suspend/hibernation. Signed-off-by: Shreeya Patel <shreeya.patel(a)collabora.com> --- Changes in v2 - Use rtcwake utility instead of sysfs for setting up a RTC wakeup alarm tools/testing/selftests/cpufreq/cpufreq.sh | 15 +++++++++++++++ tools/testing/selftests/cpufreq/main.sh | 13 ++++++++++++- 2 files changed, 27 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/cpufreq/cpufreq.sh b/tools/testing/selftests/cpufreq/cpufreq.sh index b583a2fb4504..a427de1f9e08 100755 --- a/tools/testing/selftests/cpufreq/cpufreq.sh +++ b/tools/testing/selftests/cpufreq/cpufreq.sh @@ -232,6 +232,21 @@ do_suspend() for i in `seq 1 $2`; do printf "Starting $1\n" + + if [ "$3" = "rtc" ]; then + if ! command -v rtcwake &> /dev/null; then + printf "rtcwake could not be found, please install it.\n" + return 1 + fi + + rtcwake -m $filename -s 15 + + if [ $? -ne 0 ]; then + printf "Failed to suspend using RTC wake alarm\n" + return 1 + fi + fi + echo $filename > $SYSFS/power/state printf "Came out of $1\n" diff --git a/tools/testing/selftests/cpufreq/main.sh b/tools/testing/selftests/cpufreq/main.sh index 60ce18ed0666..b1ca4147a5e6 100755 --- a/tools/testing/selftests/cpufreq/main.sh +++ b/tools/testing/selftests/cpufreq/main.sh @@ -24,6 +24,8 @@ helpme() [-t <basic: Basic cpufreq testing suspend: suspend/resume, hibernate: hibernate/resume, + suspend_rtc: suspend/resume back using the RTC wakeup alarm, + hibernate_rtc: hibernate/resume back using the RTC wakeup alarm, modtest: test driver or governor modules. Only to be used with -d or -g options, sptest1: Simple governor switch to produce lockdep. sptest2: Concurrent governor switch to produce lockdep. @@ -76,7 +78,8 @@ parse_arguments() helpme ;; - t) # --func_type (Function to perform: basic, suspend, hibernate, modtest, sptest1/2/3/4 (default: basic)) + t) # --func_type (Function to perform: basic, suspend, hibernate, + # suspend_rtc, hibernate_rtc, modtest, sptest1/2/3/4 (default: basic)) FUNC=$OPTARG ;; @@ -122,6 +125,14 @@ do_test() do_suspend "hibernate" 1 ;; + "suspend_rtc") + do_suspend "suspend" 1 rtc + ;; + + "hibernate_rtc") + do_suspend "hibernate" 1 rtc + ;; + "modtest") # Do we have modules in place? if [ -z $DRIVER_MOD ] && [ -z $GOVERNOR_MOD ]; then -- 2.39.2

1 year, 1 month

3
2
0 0

[PATCH HID 0/4] HID: selftest fixes after merge into 6.11-rc0 tree

by Benjamin Tissoires

After HID-BPF struct_ops was merged into 6.11-rc0, there are a few mishaps: - the bpf_wq API changed and needs to be updated here - libbpf now auto-attach all the struct_ops it sees in the bpf object, leading to attempting at attaching them multiple times Fix the selftests but also prevent the same struct_ops to be attached more than once as this enters various locks, confusions, and kernel oopses. Signed-off-by: Benjamin Tissoires <bentiss(a)kernel.org> --- Benjamin Tissoires (4): selftests/hid: fix bpf_wq new API selftests/hid: disable struct_ops auto-attach HID: bpf: prevent the same struct_ops to be attached more than once selftests/hid: add test for attaching multiple time the same struct_ops drivers/hid/bpf/hid_bpf_struct_ops.c | 5 +++++ tools/testing/selftests/hid/hid_bpf.c | 26 ++++++++++++++++++++++ tools/testing/selftests/hid/progs/hid.c | 2 +- .../testing/selftests/hid/progs/hid_bpf_helpers.h | 2 +- 4 files changed, 33 insertions(+), 2 deletions(-) --- base-commit: 6e504d2c61244a01226c5100c835e44fb9b85ca8 change-id: 20240723-fix-6-11-bpf-cfa63dcda5bc Best regards, -- Benjamin Tissoires <bentiss(a)kernel.org>

1 year, 1 month

2
6
0 0

[PATCH v4] tools/testing:Fix the wrong format specifier

by Zhu Jun

The format specifier in fprintf is "%u", that "%u" should use unsigned int type instead.the problem is discovered by reading code. Signed-off-by: Zhu Jun <zhujun2(a)cmss.chinamobile.com> --- v1->v2: modify commit info add how to find the problem in the log v2->v3: Seems this can use macro WTERMSIG like those above usage, rather than changing the print format. v3->v4: Now the commit summary doesn't match the change you are making. Also WTERMSIG() is incorrect for this conditional code path. See comments below in the code path. I would leave the v2 code intact. How are you testing this change? Please include the details in the change log. tools/testing/selftests/kselftest_harness.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index e05ac8261046..675b8f43e148 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -910,7 +910,7 @@ void __wait_for_test(struct __test_metadata *t) .sa_flags = SA_SIGINFO, }; struct sigaction saved_action; - int status; + unsigned int status; if (sigaction(SIGALRM, &action, &saved_action)) { t->passed = 0; -- 2.17.1

1 year, 1 month

2
1
0 0

[PATCH v2 00/10] selftests: kvm: s390: Add s390x ucontrol selftests

by Christoph Schlameuss

This patch series adds a selftest suite to validate the s390x architecture specific ucontrol KVM interface. When creating a VM on s390x it is possible to create it as userspace controlled VM or in short ucontrol VM. These VMs delegates the management of the VM to userspace instead of handling most events within the kernel. Consequently the userspace has to manage interrupts, memory allocation etc. Before this patch set this functionality lacks any public test cases. It is desirable to add test cases for this interface to be able to reduce the risk of breaking changes in the future. In order to provision a ucontrol VM the kernel needs to be compiled with the CONFIG_KVM_S390_UCONTROL enabled. The users with sys_admin capability can then create a new ucontrol VM providing the KVM_VM_S390_UCONTROL parameter to the KVM_CREATE_VM ioctl. The kernels existing selftest helper functions can only be partially be reused for these tests. The test cases cover existing special handling of ucontrol VMs within the implementation and basic VM creation and handling cases: * Reject setting HPAGE when VM is ucontrol * Assert KVM_GET_DIRTY_LOG is rejected * Assert KVM_S390_VM_MEM_LIMIT_SIZE is rejected * Assert state of initial SIE flags setup by the kernel * Run simple program in VM with and without DAT * Assert KVM_EXIT_S390_UCONTROL exit on not mapped memory access * Assert functionality of storage keys in ucontrol VM Running the test cases requires sys_admin capabilities to start the ucontrol VM. This can be achieved by running as root or with a command like: sudo setpriv --reuid nobody --inh-caps -all,+sys_admin \ --ambient-caps -all,+sys_admin --bounding-set -all,+sys_admin \ ./ucontrol_test The patch set does also contain some code cleanup / consolidation of architecture specific defines that are now used in multiple test cases. --- V1 -> V2: - add ucontrol to s390 debug config (new patch) - PATCH 2: changed atomic_t to __u32 (thanks Claudio) - PATCH 4: reformatted comment in FIXTURE_SETUP(uc_kvm) - PATCH 5: refactored to display 8 byte blocks + more internal reuse (thanks Claudio) - PATCH 7: make use of more declarative defines instead of magic values - PATCH 8: make use of more declarative defines instead of magic values (thanks Claudio) - PATCH 9: add reference to fix verified by the test case Christoph Schlameuss (10): selftests: kvm: s390: Define page sizes in shared header selftests: kvm: s390: Add kvm_s390_sie_block definition for userspace tests selftests: kvm: s390: Add s390x ucontrol test suite with hpage test selftests: kvm: s390: Add test fixture and simple VM setup tests selftests: kvm: s390: Add debug print functions selftests: kvm: s390: Add VM run test case selftests: kvm: s390: Add uc_map_unmap VM test case selftests: kvm: s390: Add uc_skey VM test case selftests: kvm: s390: Verify reject memory region operations for ucontrol VMs s390: Enable KVM_S390_UCONTROL config in debug_defconfig arch/s390/Kconfig.debug | 3 + tools/testing/selftests/kvm/.gitignore | 1 + tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/include/s390x/debug_print.h | 69 ++ .../selftests/kvm/include/s390x/processor.h | 5 + .../testing/selftests/kvm/include/s390x/sie.h | 240 +++++++ .../selftests/kvm/lib/s390x/processor.c | 10 +- tools/testing/selftests/kvm/s390x/cmma_test.c | 7 +- tools/testing/selftests/kvm/s390x/config | 2 + .../testing/selftests/kvm/s390x/debug_test.c | 4 +- tools/testing/selftests/kvm/s390x/memop.c | 4 +- tools/testing/selftests/kvm/s390x/tprot.c | 5 +- .../selftests/kvm/s390x/ucontrol_test.c | 614 ++++++++++++++++++ 13 files changed, 949 insertions(+), 16 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/s390x/debug_print.h create mode 100644 tools/testing/selftests/kvm/include/s390x/sie.h create mode 100644 tools/testing/selftests/kvm/s390x/config create mode 100644 tools/testing/selftests/kvm/s390x/ucontrol_test.c base-commit: 66ebbdfdeb093e097399b1883390079cd4c3022b -- 2.45.2

1 year, 1 month

3
19
0 0

[PATCH v4 0/2] selftests/bpf: convert test_xdp_veth to test_progs framework

by Alexis Lothoré (eBPF Foundation)

Hello everyone, this small series is a first step in a larger effort aiming to help improve eBPF selftests and the testing coverage in CI. It focuses for now on test_xdp_veth.sh, a small test which is not integrated yet in test_progs. The series is mostly about a rewrite of test_xdp_veth.sh to make it able to run under test_progs, relying on libbpf to manipulate bpf programs involved in the test. Signed-off-by: Alexis Lothoré <alexis.lothore(a)bootlin.com> --- Changes in v4: - add missing netns_close in an error path during programs attach - Link to v3: https://lore.kernel.org/r/20240716-convert_test_xdp_veth-v3-0-7b01389e3cb3@… Changes in v3: - Fix doc style in the new test - Collect acked-by tags - Link to v2: https://lore.kernel.org/r/20240715-convert_test_xdp_veth-v2-0-46290b82f6d2@… Changes in v2: - fix many formatting issues raised by checkpatch - use static namespaces instead of random ones - use SYS_NOFAIL instead of snprintf() + system () - squashed the new test addition patch and the old test removal patch - Link to v1: https://lore.kernel.org/r/20240711-convert_test_xdp_veth-v1-0-868accb0a727@… --- Alexis Lothoré (eBPF Foundation) (2): selftests/bpf: update xdp_redirect_map prog sections for libbpf selftests/bpf: integrate test_xdp_veth into test_progs tools/testing/selftests/bpf/Makefile | 1 - .../selftests/bpf/prog_tests/test_xdp_veth.c | 213 +++++++++++++++++++++ .../testing/selftests/bpf/progs/xdp_redirect_map.c | 6 +- tools/testing/selftests/bpf/test_xdp_veth.sh | 121 ------------ 4 files changed, 216 insertions(+), 125 deletions(-) --- base-commit: 4837cbaa1365cdb213b58577197c5b10f6e2aa81 change-id: 20240710-convert_test_xdp_veth-04cc05f5557d Best regards, -- Alexis Lothoré, Bootlin Embedded Linux and Kernel engineering https://bootlin.com

1 year, 1 month

2
3
0 0

[PATCH] selftests: lib: remove strscpy test

by Muhammad Usama Anjum

The strscpy test loads test_strscpy module for testing. But test_strscpy was converted to Kunit (see fixes). Hence remove strscpy. Fixes: 41eefc46a3a4 ("string: Convert strscpy() self-test to KUnit") Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/lib/strscpy.sh | 3 --- 1 file changed, 3 deletions(-) delete mode 100755 tools/testing/selftests/lib/strscpy.sh diff --git a/tools/testing/selftests/lib/strscpy.sh b/tools/testing/selftests/lib/strscpy.sh deleted file mode 100755 index be60ef6e1a7fb..0000000000000 --- a/tools/testing/selftests/lib/strscpy.sh +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0+ -$(dirname $0)/../kselftest/module.sh "strscpy*" test_strscpy -- 2.39.2

1 year, 1 month

1
0
0 0

[PATCH v7 00/13] riscv: Add support for xtheadvector

by Charlie Jenkins

xtheadvector is a custom extension that is based upon riscv vector version 0.7.1 [1]. All of the vector routines have been modified to support this alternative vector version based upon whether xtheadvector was determined to be supported at boot. vlenb is not supported on the existing xtheadvector hardware, so a devicetree property thead,vlenb is added to provide the vlenb to Linux. There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is used to request which thead vendor extensions are supported on the current platform. This allows future vendors to allocate hwprobe keys for their vendor. Support for xtheadvector is also added to the vector kselftests. Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> [1] https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361… --- This series is a continuation of a different series that was fragmented into two other series in an attempt to get part of it merged in the 6.10 merge window. The split-off series did not get merged due to a NAK on the series that added the generic riscv,vlenb devicetree entry. This series has converted riscv,vlenb to thead,vlenb to remedy this issue. The original series is titled "riscv: Support vendor extensions and xtheadvector" [3]. The series titled "riscv: Extend cpufeature.c to detect vendor extensions" is still under development and this series is based on that series! [4] I have tested this with an Allwinner Nezha board. I ran into issues booting the board after 6.9-rc1 so I applied these patches to 6.8. There are a couple of minor merge conflicts that do arrise when doing that, so please let me know if you have been able to boot this board with a 6.9 kernel. I used SkiffOS [1] to manage building the image, but upgraded the U-Boot version to Samuel Holland's more up-to-date version [2] and changed out the device tree used by U-Boot with the device trees that are present in upstream linux and this series. Thank you Samuel for all of the work you did to make this task possible. [1] https://github.com/skiffos/SkiffOS/tree/master/configs/allwinner/nezha [2] https://github.com/smaeul/u-boot/commit/2e89b706f5c956a70c989cd31665f1429e9… [3] https://lore.kernel.org/all/20240503-dev-charlie-support_thead_vector_6_9-v… [4] https://lore.kernel.org/lkml/20240719-support_vendor_extensions-v3-4-0af758… --- Changes in v7: - Add defs for has_xtheadvector_no_alternatives() and has_xtheadvector() when vector disabled. (Palmer) - Link to v6: https://lore.kernel.org/r/20240722-xtheadvector-v6-0-c9af0130fa00@rivosinc.… Changes in v6: - Fix return type of is_vector_supported()/is_xthead_supported() to be bool - Link to v5: https://lore.kernel.org/r/20240719-xtheadvector-v5-0-4b485fc7d55f@rivosinc.… Changes in v5: - Rebase on for-next - Link to v4: https://lore.kernel.org/r/20240702-xtheadvector-v4-0-2bad6820db11@rivosinc.… Changes in v4: - Replace inline asm with C (Samuel) - Rename VCSRs to CSRs (Samuel) - Replace .insn directives with .4byte directives - Link to v3: https://lore.kernel.org/r/20240619-xtheadvector-v3-0-bff39eb9668e@rivosinc.… Changes in v3: - Add back Heiko's signed-off-by (Conor) - Mark RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 as a bitmask - Link to v2: https://lore.kernel.org/r/20240610-xtheadvector-v2-0-97a48613ad64@rivosinc.… Changes in v2: - Removed extraneous references to "riscv,vlenb" (Jess) - Moved declaration of "thead,vlenb" into cpus.yaml and added restriction that it's only applicable to thead cores (Conor) - Check CONFIG_RISCV_ISA_XTHEADVECTOR instead of CONFIG_RISCV_ISA_V for thead,vlenb (Jess) - Fix naming of hwprobe variables (Evan) - Link to v1: https://lore.kernel.org/r/20240609-xtheadvector-v1-0-3fe591d7f109@rivosinc.… --- Charlie Jenkins (12): dt-bindings: riscv: Add xtheadvector ISA extension description dt-bindings: cpus: add a thead vlen register length property riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree riscv: Add thead and xtheadvector as a vendor extension riscv: vector: Use vlenb from DT for thead riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT riscv: Add xtheadvector instruction definitions riscv: vector: Support xtheadvector save/restore riscv: hwprobe: Add thead vendor extension probing riscv: hwprobe: Document thead vendor extensions and xtheadvector extension selftests: riscv: Fix vector tests selftests: riscv: Support xtheadvector in vector tests Heiko Stuebner (1): RISC-V: define the elements of the VCSR vector CSR Documentation/arch/riscv/hwprobe.rst | 10 + Documentation/devicetree/bindings/riscv/cpus.yaml | 19 ++ .../devicetree/bindings/riscv/extensions.yaml | 10 + arch/riscv/Kconfig.vendor | 26 ++ arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 3 +- arch/riscv/include/asm/cpufeature.h | 2 + arch/riscv/include/asm/csr.h | 15 ++ arch/riscv/include/asm/hwprobe.h | 5 +- arch/riscv/include/asm/switch_to.h | 2 +- arch/riscv/include/asm/vector.h | 225 ++++++++++++---- arch/riscv/include/asm/vendor_extensions/thead.h | 42 +++ .../include/asm/vendor_extensions/thead_hwprobe.h | 18 ++ .../include/asm/vendor_extensions/vendor_hwprobe.h | 37 +++ arch/riscv/include/uapi/asm/hwprobe.h | 3 +- arch/riscv/include/uapi/asm/vendor/thead.h | 3 + arch/riscv/kernel/cpufeature.c | 54 +++- arch/riscv/kernel/kernel_mode_vector.c | 8 +- arch/riscv/kernel/process.c | 4 +- arch/riscv/kernel/signal.c | 6 +- arch/riscv/kernel/sys_hwprobe.c | 5 + arch/riscv/kernel/vector.c | 24 +- arch/riscv/kernel/vendor_extensions.c | 10 + arch/riscv/kernel/vendor_extensions/Makefile | 2 + arch/riscv/kernel/vendor_extensions/thead.c | 18 ++ .../riscv/kernel/vendor_extensions/thead_hwprobe.c | 19 ++ tools/testing/selftests/riscv/vector/.gitignore | 3 +- tools/testing/selftests/riscv/vector/Makefile | 17 +- .../selftests/riscv/vector/v_exec_initval_nolibc.c | 93 +++++++ tools/testing/selftests/riscv/vector/v_helpers.c | 68 +++++ tools/testing/selftests/riscv/vector/v_helpers.h | 8 + tools/testing/selftests/riscv/vector/v_initval.c | 22 ++ .../selftests/riscv/vector/v_initval_nolibc.c | 68 ----- .../selftests/riscv/vector/vstate_exec_nolibc.c | 20 +- .../testing/selftests/riscv/vector/vstate_prctl.c | 295 ++++++++++++--------- 34 files changed, 891 insertions(+), 273 deletions(-) --- base-commit: 554462ced9ac97487c8f725fe466a9c20ed87521 change-id: 20240530-xtheadvector-833d3d17b423 -- - Charlie

1 year, 1 month

2
15
0 0

[PATCH bpf-next v1 00/19] selftests/bpf: Improve libc portability / musl support (part 1)

by Tony Ambardar

Hello all, This series includes the bulk of libc-related compile fixes accumulated to support systems using musl, with smaller numbers to follow. These patches are simple and straightforward, and the series has been tested with the kernel-patches/bpf CI and locally using mips64el-gcc/musl-libc and QEMU with an OpenWrt rootfs. The patches address a few general categories of libc portability issues: - missing, redundant or incorrect include headers - disabled GNU header extensions (i.e. missing #define _GNU_SOURCE) - issues with types and casting Feedback and suggestions for improvement are welcome! Thanks, Tony Tony Ambardar (19): selftests/bpf: Use pid_t consistently in test_progs.c selftests/bpf: Fix compile error from rlim_t in sk_storage_map.c selftests/bpf: Fix error compiling bpf_iter_setsockopt.c with musl libc selftests/bpf: Drop unneeded include in unpriv_helpers.c selftests/bpf: Drop unneeded include in sk_lookup.c selftests/bpf: Drop unneeded include in flow_dissector.c selftests/bpf: Fix missing ARRAY_SIZE() definition in bench.c selftests/bpf: Fix missing UINT_MAX definitions in benchmarks selftests/bpf: Fix missing BUILD_BUG_ON() declaration selftests/bpf: Fix include of <sys/fcntl.h> selftests/bpf: Fix compiling parse_tcp_hdr_opt.c with musl-libc selftests/bpf: Fix compiling kfree_skb.c with musl-libc selftests/bpf: Fix compiling flow_dissector.c with musl-libc selftests/bpf: Fix compiling tcp_rtt.c with musl-libc selftests/bpf: Fix compiling core_reloc.c with musl-libc selftests/bpf: Fix errors compiling lwt_redirect.c with musl libc selftests/bpf: Fix errors compiling decap_sanity.c with musl libc selftests/bpf: Fix errors compiling crypto_sanity.c with musl libc selftests/bpf: Fix errors compiling cg_storage_multi.h with musl libc tools/testing/selftests/bpf/bench.c | 1 + tools/testing/selftests/bpf/bench.h | 1 + tools/testing/selftests/bpf/map_tests/sk_storage_map.c | 2 +- tools/testing/selftests/bpf/prog_tests/bpf_iter_setsockopt.c | 2 +- tools/testing/selftests/bpf/prog_tests/core_reloc.c | 1 + tools/testing/selftests/bpf/prog_tests/crypto_sanity.c | 1 - tools/testing/selftests/bpf/prog_tests/decap_sanity.c | 1 - tools/testing/selftests/bpf/prog_tests/flow_dissector.c | 2 +- tools/testing/selftests/bpf/prog_tests/kfree_skb.c | 1 + tools/testing/selftests/bpf/prog_tests/lwt_redirect.c | 1 - tools/testing/selftests/bpf/prog_tests/ns_current_pid_tgid.c | 2 +- tools/testing/selftests/bpf/prog_tests/parse_tcp_hdr_opt.c | 1 + tools/testing/selftests/bpf/prog_tests/sk_lookup.c | 1 - tools/testing/selftests/bpf/prog_tests/tcp_rtt.c | 1 + tools/testing/selftests/bpf/prog_tests/user_ringbuf.c | 1 + tools/testing/selftests/bpf/progs/cg_storage_multi.h | 2 -- tools/testing/selftests/bpf/test_progs.c | 2 +- tools/testing/selftests/bpf/unpriv_helpers.c | 1 - 18 files changed, 12 insertions(+), 12 deletions(-) -- 2.34.1

1 year, 1 month

6
31
0 0

[PATCH v2] selftests: mm: add s390 to ARCH check

by Nico Pache

commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM") changed the env variable for the architecture from MACHINE to ARCH. This is preventing 3 required TEST_GEN_FILES from being included when cross compiling s390x and errors when trying to run the test suite. This is due to the ARCH variable already being set and the arch folder name being s390. Add "s390" to the filtered list to cover this case and have the 3 files included in the build. Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM") Cc: stable(a)kernel.org Cc: Mark Brown <broonie(a)kernel.org> Signed-off-by: Nico Pache <npache(a)redhat.com> --- tools/testing/selftests/mm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index 901e0d07765b..7b8a5def54a1 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -110,7 +110,7 @@ endif endif -ifneq (,$(filter $(ARCH),arm64 ia64 mips64 parisc64 powerpc riscv64 s390x sparc64 x86_64)) +ifneq (,$(filter $(ARCH),arm64 ia64 mips64 parisc64 powerpc riscv64 s390x sparc64 x86_64 s390)) TEST_GEN_FILES += va_high_addr_switch TEST_GEN_FILES += virtual_address_range TEST_GEN_FILES += write_to_hugetlbfs -- 2.45.2

1 year, 1 month

1
0
0 0

[PATCH] selftests: mm: add s390 to ARCH check

by Nico Pache

When compiling with ARCH already set, the s390x ARCH is actually s390. Add s390 to the ARCH check list, so we can properly build selftests for s390. Signed-off-by: Nico Pache <npache(a)redhat.com> --- tools/testing/selftests/mm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index 901e0d07765b..7b8a5def54a1 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -110,7 +110,7 @@ endif endif -ifneq (,$(filter $(ARCH),arm64 ia64 mips64 parisc64 powerpc riscv64 s390x sparc64 x86_64)) +ifneq (,$(filter $(ARCH),arm64 ia64 mips64 parisc64 powerpc riscv64 s390x sparc64 x86_64 s390)) TEST_GEN_FILES += va_high_addr_switch TEST_GEN_FILES += virtual_address_range TEST_GEN_FILES += write_to_hugetlbfs -- 2.45.2

1 year, 1 month

2
1
0 0

[PATCH v3] selftests:Fix printf format string in kselftest_harness.h

by Zhu Jun

'%u' in format string requires 'unsigned int' in __wait_for_test() but the argument type is 'signed int' that this problem was discovered by reading code.use macro WTERMSIG like those above usage to fix the wrong format specifier. Signed-off-by: Zhu Jun <zhujun2(a)cmss.chinamobile.com> --- Changes v1->v2: modify commit info add how to find the problem in the log v2->v3: Seems this can use macro WTERMSIG like those above usage, rather than changing the print format. tools/testing/selftests/kselftest_harness.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index dbbbcc6c04ee..f41f4435e9a4 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -1086,7 +1086,7 @@ void __wait_for_test(struct __test_metadata *t) fprintf(TH_LOG_STREAM, "# %s: Test ended in some other way [%d]\n", t->name, - status); + WTERMSIG(status)); } } -- 2.17.1

1 year, 1 month

2
1
0 0

[PATCH bpf-next v3 0/3] selftests/bpf: new MPTCP subflow subtest

by Matthieu Baerts (NGI0)

In this series from Geliang, modifying MPTCP BPF selftests, we have: - A new MPTCP subflow BPF program setting socket options per subflow: it looks better to have this old test program in the BPF selftests to track regressions and to serve as example. Note: Nicolas is no longer working for Tessares, but he did this work while working for them, and his email address is no longer available. - A new symlink to MPTCP's pm_nl_ctl tool is added in BPF selftests, to be able to use it instead of 'ip mptcp' which is not supported by the BPF CI running IPRoute 5.5.0. - A new MPTCP BPF subtest validating the new BPF program added in the first patch. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Changes in v3: - Sorry for the delay between v2 and v3, this series was conflicting with the "add netns helpers", but it looks like it is on hold: https://lore.kernel.org/cover.1715821541.git.tanggeliang@kylinos.cn - Patch 1/3 includes "bpf_tracing_net.h", introduced in between. - New patch 2/3: "selftests/bpf: Add mptcp pm_nl_ctl link". - Patch 3/3: use the tool introduced in patch 2/3 + SYS_NOFAIL() helper. - Link to v2: https://lore.kernel.org/r/20240509-upstream-bpf-next-20240506-mptcp-subflow… Changes in v2: - Previous patches 1/4 and 2/4 have been dropped from this series: - 1/4: "selftests/bpf: Handle SIGINT when creating netns": - A new version, more generic and no longer specific to MPTCP BPF selftest will be sent later, as part of a new series. (Alexei) - 2/4: "selftests/bpf: Add RUN_MPTCP_TEST macro": - Removed, not to hide helper functions in macros. (Alexei) - The commit message of patch 1/2 has been clarified to avoid some possible confusions spot by Alexei. - Link to v1: https://lore.kernel.org/r/20240507-upstream-bpf-next-20240506-mptcp-subflow… --- Geliang Tang (2): selftests/bpf: Add mptcp pm_nl_ctl link selftests/bpf: Add mptcp subflow subtest Nicolas Rybowski (1): selftests/bpf: Add mptcp subflow example MAINTAINERS | 1 + tools/testing/selftests/bpf/Makefile | 3 +- tools/testing/selftests/bpf/mptcp_pm_nl_ctl.c | 1 + tools/testing/selftests/bpf/prog_tests/mptcp.c | 104 ++++++++++++++++++++++ tools/testing/selftests/bpf/progs/mptcp_subflow.c | 59 ++++++++++++ 5 files changed, 167 insertions(+), 1 deletion(-) --- base-commit: fd8db07705c55a995c42b1e71afc42faad675b0b change-id: 20240506-upstream-bpf-next-20240506-mptcp-subflow-test-faef6654bfa3 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

1 year, 1 month

4
9
0 0

[PATCH net-next v15 00/14] Device Memory TCP

by Mina Almasry

v15: https://patchwork.kernel.org/project/netdevbpf/list/?series=865481&state=* ==== No material changes in this version, only a fix to linking against libynl.a from the last version. Per Jakub's instructions I've pulled one of his patches into this series, and now use the new libynl.a correctly, I hope. As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v15/ v14: https://patchwork.kernel.org/project/netdevbpf/list/?series=865135&archive=… ==== No material changes in this version. Only rebase and re-verification on top of net-next. v13, I think, raced with commit ebad6d0334793 ("net/ipv4: Use nested-BH locking for ipv4_tcp_sk.") being merged to net-next that caused a patchwork failure to apply. This series should apply cleanly on commit c4532232fa2a4 ("selftests: net: remove unneeded IP_GRE config"). I did not wait the customary 24hr as Jakub said it's OK to repost as soon as I build test the rebased version: https://lore.kernel.org/netdev/20240625075926.146d769d@kernel.org/ v13: https://patchwork.kernel.org/project/netdevbpf/list/?series=861406&archive=… ==== Major changes: -------------- This iteration addresses Pavel's review comments, applies his reviewed-by's, and seeks to fix the patchwork build error (sorry!). As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v13/ v12: https://patchwork.kernel.org/project/netdevbpf/list/?series=859747&state=* ==== Major changes: -------------- This iteration only addresses one minor comment from Pavel with regards to the trace printing of netmem, and the patchwork build error introduced in v11 because I missed doing an allmodconfig build, sorry. Other than that v11, AFAICT, received no feedback. There is one discussion about how the specifics of plugging io uring memory through the page pool, but not relevant to content in this particular patchset, AFAICT. As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v12/ v11: https://patchwork.kernel.org/project/netdevbpf/list/?series=857457&state=* ==== Major Changes: -------------- v11 addresses feedback received in v10. The major change is the removal of the memory provider ops as requested by Christoph. We still accomplish the same thing, but utilizing direct function calls with if statements rather than generic ops. Additionally address sparse warnings, bugs and review comments from folks that reviewed. As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v11/ Detailed changelog: ------------------- - Fixes in netdev_rx_queue_restart() from Pavel & David. - Remove commit e650e8c3a36f5 ("net: page_pool: create hooks for custom page providers") from the series to address Christoph's feedback and rebased other patches on the series on this change. - Fixed build errors with CONFIG_DMA_SHARED_BUFFER && !CONFIG_GENERIC_ALLOCATOR build. - Fixed sparse warnings pointed out by Paolo. - Drop unnecessary gro_pull_from_frag0 checks. - Added Bagas reviewed-by to docs. Cc: Bagas Sanjaya <bagasdotme(a)gmail.com> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Christoph Hellwig <hch(a)infradead.org> Cc: Nikolay Aleksandrov <razor(a)blackwall.org> v10: https://patchwork.kernel.org/project/netdevbpf/list/?series=852422&state=* ==== Major Changes: -------------- v9 was sent right before the merge window closed (sorry!). v10 is almost a re-send of the series now that the merge window re-opened. Only rebased to latest net-next and addressed some minor iterative comments received on v9. As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v10/ Detailed changelog: ------------------- - Fixed tokens leaking in DONTNEED setsockopt (Nikolay). - Moved net_iov_dma_addr() to devmem.c and made it a devmem specific helpers (David). - Rename hook alloc_pages to alloc_netmems as alloc_pages is now preprocessor macro defined and causes a build error. v9: === Major Changes: -------------- GVE queue API has been merged. Submitting this version as non-RFC after rebasing on top of the merged API, and dropped the out of tree queue API I was carrying on github. Addressed the little feedback v8 has received. Detailed changelog: ------------------ - Added new patch from David Wei to this series for netdev_rx_queue_restart() - Fixed sparse error. - Removed CONFIG_ checks in netmem_is_net_iov() - Flipped skb->readable to skb->unreadable - Minor fixes to selftests & docs. RFC v8: ======= Major Changes: -------------- - Fixed build error generated by patch-by-patch build. - Applied docs suggestions from Randy. RFC v7: ======= Major Changes: -------------- This revision largely rebases on top of net-next and addresses the feedback RFCv6 received from folks, namely Jakub, Yunsheng, Arnd, David, & Pavel. The series remains in RFC because the queue-API ndos defined in this series are not yet implemented. I have a GVE implementation I carry out of tree for my testing. A upstreamable GVE implementation is in the works. Aside from that, in my estimation all the patches are ready for review/merge. Please do take a look. As usual the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v7/ Detailed changelog: - Use admin-perm in netlink API. - Addressed feedback from Jakub with regards to netlink API implementation. - Renamed devmem.c functions to something more appropriate for that file. - Improve the performance seen through the page_pool benchmark. - Fix the value definition of all the SO_DEVMEM_* uapi. - Various fixes to documentation. Perf - page-pool benchmark: --------------------------- Improved performance of bench_page_pool_simple.ko tests compared to v6: https://pastebin.com/raw/v5dYRg8L net-next base: 8 cycle fast path. RFC v6: 10 cycle fast path. RFC v7: 9 cycle fast path. RFC v7 with CONFIG_DMA_SHARED_BUFFER disabled: 8 cycle fast path, same as baseline. Perf - Devmem TCP benchmark: --------------------- Perf is about the same regardless of the changes in v7, namely the removal of the static_branch_unlikely to improve the page_pool benchmark performance: 189/200gbps bi-directional throughput with RX devmem TCP and regular TCP TX i.e. ~95% line rate. RFC v6: ======= Major Changes: -------------- This revision largely rebases on top of net-next and addresses the little feedback RFCv5 received. The series remains in RFC because the queue-API ndos defined in this series are not yet implemented. I have a GVE implementation I carry out of tree for my testing. A upstreamable GVE implementation is in the works. Aside from that, in my estimation all the patches are ready for review/merge. Please do take a look. As usual the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v6/ This version also comes with some performance data recorded in the cover letter (see below changelog). Detailed changelog: - Rebased on top of the merged netmem_ref changes. - Converted skb->dmabuf to skb->readable (Pavel). Pavel's original suggestion was to remove the skb->dmabuf flag entirely, but when I looked into it closely, I found the issue that if we remove the flag we have to dereference the shinfo(skb) pointer to obtain the first frag to tell whether an skb is readable or not. This can cause a performance regression if it dirties the cache line when the shinfo(skb) was not really needed. Instead, I converted the skb->dmabuf flag into a generic skb->readable flag which can be re-used by io_uring 0-copy RX. - Squashed a few locking optimizations from Eric Dumazet in the RX path and the DEVMEM_DONTNEED setsockopt. - Expanded the tests a bit. Added validation for invalid scenarios and added some more coverage. Perf - page-pool benchmark: --------------------------- bench_page_pool_simple.ko tests with and without these changes: https://pastebin.com/raw/ncHDwAbn AFAIK the number that really matters in the perf tests is the 'tasklet_page_pool01_fast_path Per elem'. This one measures at about 8 cycles without the changes but there is some 1 cycle noise in some results. With the patches this regresses to 9 cycles with the changes but there is 1 cycle noise occasionally running this test repeatedly. Lastly I tried disable the static_branch_unlikely() in netmem_is_net_iov() check. To my surprise disabling the static_branch_unlikely() check reduces the fast path back to 8 cycles, but the 1 cycle noise remains. Perf - Devmem TCP benchmark: --------------------- 189/200gbps bi-directional throughput with RX devmem TCP and regular TCP TX i.e. ~95% line rate. Major changes in RFC v5: ======================== 1. Rebased on top of 'Abstract page from net stack' series and used the new netmem type to refer to LSB set pointers instead of re-using struct page. 2. Downgraded this series back to RFC and called it RFC v5. This is because this series is now dependent on 'Abstract page from net stack'[1] and the queue API. Both are removed from the series to reduce the patch # and those bits are fairly independent or pre-requisite work. 3. Reworked the page_pool devmem support to use netmem and for some more unified handling. 4. Reworked the reference counting of net_iov (renamed from page_pool_iov) to use pp_ref_count for refcounting. The full changes including the dependent series and GVE page pool support is here: https://github.com/mina/linux/commits/tcpdevmem-rfcv5/ [1] https://patchwork.kernel.org/project/netdevbpf/list/?series=810774 Major changes in v1: ==================== 1. Implemented MVP queue API ndos to remove the userspace-visible driver reset. 2. Fixed issues in the napi_pp_put_page() devmem frag unref path. 3. Removed RFC tag. Many smaller addressed comments across all the patches (patches have individual change log). Full tree including the rest of the GVE driver changes: https://github.com/mina/linux/commits/tcpdevmem-v1 Changes in RFC v3: ================== 1. Pulled in the memory-provider dependency from Jakub's RFC[1] to make the series reviewable and mergeable. 2. Implemented multi-rx-queue binding which was a todo in v2. 3. Fix to cmsg handling. The sticking point in RFC v2[2] was the device reset required to refill the device rx-queues after the dmabuf bind/unbind. The solution suggested as I understand is a subset of the per-queue management ops Jakub suggested or similar: https://lore.kernel.org/netdev/20230815171638.4c057dcd@kernel.org/ This is not addressed in this revision, because: 1. This point was discussed at netconf & netdev and there is openness to using the current approach of requiring a device reset. 2. Implementing individual queue resetting seems to be difficult for my test bed with GVE. My prototype to test this ran into issues with the rx-queues not coming back up properly if reset individually. At the moment I'm unsure if it's a mistake in the POC or a genuine issue in the virtualization stack behind GVE, which currently doesn't test individual rx-queue restart. 3. Our usecases are not bothered by requiring a device reset to refill the buffer queues, and we'd like to support NICs that run into this limitation with resetting individual queues. My thought is that drivers that have trouble with per-queue configs can use the support in this series, while drivers that support new netdev ops to reset individual queues can automatically reset the queue as part of the dma-buf bind/unbind. The same approach with device resets is presented again for consideration with other sticking points addressed. This proposal includes the rx devmem path only proposed for merge. For a snapshot of my entire tree which includes the GVE POC page pool support & device memory support: https://github.com/torvalds/linux/compare/master...mina:linux:tcpdevmem-v3 [1] https://lore.kernel.org/netdev/f8270765-a27b-6ccf-33ea-cda097168d79@redhat.… [2] https://lore.kernel.org/netdev/CAHS8izOVJGJH5WF68OsRWFKJid1_huzzUK+hpKbLcL4… Changes in RFC v2: ================== The sticking point in RFC v1[1] was the dma-buf pages approach we used to deliver the device memory to the TCP stack. RFC v2 is a proof-of-concept that attempts to resolve this by implementing scatterlist support in the networking stack, such that we can import the dma-buf scatterlist directly. This is the approach proposed at a high level here[2]. Detailed changes: 1. Replaced dma-buf pages approach with importing scatterlist into the page pool. 2. Replace the dma-buf pages centric API with a netlink API. 3. Removed the TX path implementation - there is no issue with implementing the TX path with scatterlist approach, but leaving out the TX path makes it easier to review. 4. Functionality is tested with this proposal, but I have not conducted perf testing yet. I'm not sure there are regressions, but I removed perf claims from the cover letter until they can be re-confirmed. 5. Added Signed-off-by: contributors to the implementation. 6. Fixed some bugs with the RX path since RFC v1. Any feedback welcome, but specifically the biggest pending questions needing feedback IMO are: 1. Feedback on the scatterlist-based approach in general. 2. Netlink API (Patch 1 & 2). 3. Approach to handle all the drivers that expect to receive pages from the page pool (Patch 6). [1] https://lore.kernel.org/netdev/dfe4bae7-13a0-3c5d-d671-f61b375cb0b4@gmail.c… [2] https://lore.kernel.org/netdev/CAHS8izPm6XRS54LdCDZVd0C75tA1zHSu6jLVO8nzTLX… ================== * TL;DR: Device memory TCP (devmem TCP) is a proposal for transferring data to and/or from device memory efficiently, without bouncing the data to a host memory buffer. * Problem: A large amount of data transfers have device memory as the source and/or destination. Accelerators drastically increased the volume of such transfers. Some examples include: - ML accelerators transferring large amounts of training data from storage into GPU/TPU memory. In some cases ML training setup time can be as long as 50% of TPU compute time, improving data transfer throughput & efficiency can help improving GPU/TPU utilization. - Distributed training, where ML accelerators, such as GPUs on different hosts, exchange data among them. - Distributed raw block storage applications transfer large amounts of data with remote SSDs, much of this data does not require host processing. Today, the majority of the Device-to-Device data transfers the network are implemented as the following low level operations: Device-to-Host copy, Host-to-Host network transfer, and Host-to-Device copy. The implementation is suboptimal, especially for bulk data transfers, and can put significant strains on system resources, such as host memory bandwidth, PCIe bandwidth, etc. One important reason behind the current state is the kernel’s lack of semantics to express device to network transfers. * Proposal: In this patch series we attempt to optimize this use case by implementing socket APIs that enable the user to: 1. send device memory across the network directly, and 2. receive incoming network packets directly into device memory. Packet _payloads_ go directly from the NIC to device memory for receive and from device memory to NIC for transmit. Packet _headers_ go to/from host memory and are processed by the TCP/IP stack normally. The NIC _must_ support header split to achieve this. Advantages: - Alleviate host memory bandwidth pressure, compared to existing network-transfer + device-copy semantics. - Alleviate PCIe BW pressure, by limiting data transfer to the lowest level of the PCIe tree, compared to traditional path which sends data through the root complex. * Patch overview: ** Part 1: netlink API Gives user ability to bind dma-buf to an RX queue. ** Part 2: scatterlist support Currently the standard for device memory sharing is DMABUF, which doesn't generate struct pages. On the other hand, networking stack (skbs, drivers, and page pool) operate on pages. We have 2 options: 1. Generate struct pages for dmabuf device memory, or, 2. Modify the networking stack to process scatterlist. Approach #1 was attempted in RFC v1. RFC v2 implements approach #2. ** part 3: page pool support We piggy back on page pool memory providers proposal: https://github.com/kuba-moo/linux/tree/pp-providers It allows the page pool to define a memory provider that provides the page allocation and freeing. It helps abstract most of the device memory TCP changes from the driver. ** part 4: support for unreadable skb frags Page pool iovs are not accessible by the host; we implement changes throughput the networking stack to correctly handle skbs with unreadable frags. ** Part 5: recvmsg() APIs We define user APIs for the user to send and receive device memory. Not included with this series is the GVE devmem TCP support, just to simplify the review. Code available here if desired: https://github.com/mina/linux/tree/tcpdevmem This series is built on top of net-next with Jakub's pp-providers changes cherry-picked. * NIC dependencies: 1. (strict) Devmem TCP require the NIC to support header split, i.e. the capability to split incoming packets into a header + payload and to put each into a separate buffer. Devmem TCP works by using device memory for the packet payload, and host memory for the packet headers. 2. (optional) Devmem TCP works better with flow steering support & RSS support, i.e. the NIC's ability to steer flows into certain rx queues. This allows the sysadmin to enable devmem TCP on a subset of the rx queues, and steer devmem TCP traffic onto these queues and non devmem TCP elsewhere. The NIC I have access to with these properties is the GVE with DQO support running in Google Cloud, but any NIC that supports these features would suffice. I may be able to help reviewers bring up devmem TCP on their NICs. * Testing: The series includes a udmabuf kselftest that show a simple use case of devmem TCP and validates the entire data path end to end without a dependency on a specific dmabuf provider. ** Test Setup Kernel: net-next with this series and memory provider API cherry-picked locally. Hardware: Google Cloud A3 VMs. NIC: GVE with header split & RSS & flow steering support. Cc: Pavel Begunkov <asml.silence(a)gmail.com> Cc: David Wei <dw(a)davidwei.uk> Cc: Jason Gunthorpe <jgg(a)ziepe.ca> Cc: Yunsheng Lin <linyunsheng(a)huawei.com> Cc: Shailend Chand <shailend(a)google.com> Cc: Harshitha Ramamurthy <hramamurthy(a)google.com> Cc: Shakeel Butt <shakeel.butt(a)linux.dev> Cc: Jeroen de Borst <jeroendb(a)google.com> Cc: Praveen Kaligineedi <pkaligineedi(a)google.com> Jakub Kicinski (1): tools: net: package libynl for use in selftests Mina Almasry (13): netdev: add netdev_rx_queue_restart() net: netdev netlink api to bind dma-buf to a net device netdev: support binding dma-buf to netdevice netdev: netdevice devmem allocator page_pool: convert to use netmem page_pool: devmem support memory-provider: dmabuf devmem memory provider net: support non paged skb frags net: add support for skbs with unreadable frags tcp: RX path for devmem TCP net: add SO_DEVMEM_DONTNEED setsockopt to release RX frags net: add devmem TCP documentation selftests: add ncdevmem, netcat for devmem TCP Documentation/netlink/specs/netdev.yaml | 57 +++ Documentation/networking/devmem.rst | 258 +++++++++++ Documentation/networking/index.rst | 1 + arch/alpha/include/uapi/asm/socket.h | 6 + arch/mips/include/uapi/asm/socket.h | 6 + arch/parisc/include/uapi/asm/socket.h | 6 + arch/sparc/include/uapi/asm/socket.h | 6 + include/linux/skbuff.h | 61 ++- include/linux/skbuff_ref.h | 11 +- include/linux/socket.h | 1 + include/net/devmem.h | 124 ++++++ include/net/mp_dmabuf_devmem.h | 44 ++ include/net/netdev_rx_queue.h | 5 + include/net/netmem.h | 208 ++++++++- include/net/page_pool/helpers.h | 124 ++++-- include/net/page_pool/types.h | 22 +- include/net/sock.h | 2 + include/net/tcp.h | 5 +- include/trace/events/page_pool.h | 30 +- include/uapi/asm-generic/socket.h | 6 + include/uapi/linux/netdev.h | 19 + include/uapi/linux/uio.h | 17 + net/bpf/test_run.c | 5 +- net/core/Makefile | 3 +- net/core/datagram.c | 6 + net/core/dev.c | 6 +- net/core/devmem.c | 376 ++++++++++++++++ net/core/gro.c | 3 +- net/core/netdev-genl-gen.c | 23 + net/core/netdev-genl-gen.h | 6 + net/core/netdev-genl.c | 103 +++++ net/core/netdev_rx_queue.c | 74 ++++ net/core/page_pool.c | 362 +++++++++------- net/core/skbuff.c | 83 +++- net/core/sock.c | 61 +++ net/ipv4/esp4.c | 3 +- net/ipv4/tcp.c | 261 +++++++++++- net/ipv4/tcp_input.c | 13 +- net/ipv4/tcp_ipv4.c | 16 + net/ipv4/tcp_minisocks.c | 2 + net/ipv4/tcp_output.c | 5 +- net/ipv6/esp6.c | 3 +- net/packet/af_packet.c | 4 +- tools/include/uapi/linux/netdev.h | 19 + tools/net/ynl/Makefile | 6 +- tools/net/ynl/lib/Makefile | 4 +- tools/testing/selftests/net/.gitignore | 1 + tools/testing/selftests/net/Makefile | 9 + tools/testing/selftests/net/ncdevmem.c | 542 ++++++++++++++++++++++++ tools/testing/selftests/net/ynl.mk | 21 + 50 files changed, 2786 insertions(+), 253 deletions(-) create mode 100644 Documentation/networking/devmem.rst create mode 100644 include/net/devmem.h create mode 100644 include/net/mp_dmabuf_devmem.h create mode 100644 net/core/devmem.c create mode 100644 net/core/netdev_rx_queue.c create mode 100644 tools/testing/selftests/net/ncdevmem.c create mode 100644 tools/testing/selftests/net/ynl.mk -- 2.45.2.803.g4e1b14247a-goog

1 year, 1 month

10
46
0 0

[PATCH net] selftests: forwarding: skip if kernel not support setting bridge fdb learning limit

by Hangbin Liu

If the testing kernel doesn't support setting fdb_max_learned or show fdb_n_learned, just skip it. Or we will get errors like ./bridge_fdb_learning_limit.sh: line 218: [: null: integer expression expected ./bridge_fdb_learning_limit.sh: line 225: [: null: integer expression expected Fixes: 6f84090333bb ("selftests: forwarding: bridge_fdb_learning_limit: Add a new selftest") Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- .../forwarding/bridge_fdb_learning_limit.sh | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/tools/testing/selftests/net/forwarding/bridge_fdb_learning_limit.sh b/tools/testing/selftests/net/forwarding/bridge_fdb_learning_limit.sh index 0760a34b7114..a21b7085da2e 100755 --- a/tools/testing/selftests/net/forwarding/bridge_fdb_learning_limit.sh +++ b/tools/testing/selftests/net/forwarding/bridge_fdb_learning_limit.sh @@ -178,6 +178,22 @@ fdb_del() check_err $? "Failed to remove a FDB entry of type ${type}" } +check_fdb_n_learned_support() +{ + if ! ip link help bridge 2>&1 | grep -q "fdb_max_learned"; then + echo "SKIP: iproute2 too old, missing bridge max learned support" + exit $ksft_skip + fi + + ip link add dev br0 type bridge + local learned=$(fdb_get_n_learned) + ip link del dev br0 + if [ "$learned" == "null" ]; then + echo "SKIP: kernel too old; bridge fdb_n_learned feature not supported." + exit $ksft_skip + fi +} + check_accounting_one_type() { local type=$1 is_counted=$2 overrides_learned=$3 @@ -274,6 +290,8 @@ check_limit() done } +check_fdb_n_learned_support + trap cleanup EXIT setup_prepare -- 2.45.0

1 year, 1 month

5
5
0 0

[PATCH v2] Documentation: KUnit: Update filename best practices

by Kees Cook

Based on feedback from Linus[1] and follow-up discussions, change the suggested file naming for KUnit tests. Link: https://lore.kernel.org/lkml/CAHk-=wgim6pNiGTBMhP8Kd3tsB7_JTAuvNJ=XYd3wPvvk… [1] Signed-off-by: Kees Cook <kees(a)kernel.org> --- Cc: David Gow <davidgow(a)google.com> Cc: Brendan Higgins <brendan.higgins(a)linux.dev> Cc: Rae Moar <rmoar(a)google.com> Cc: John Hubbard <jhubbard(a)nvidia.com> Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: linux-kselftest(a)vger.kernel.org Cc: kunit-dev(a)googlegroups.com Cc: linux-doc(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-hardening(a)vger.kernel.org --- Documentation/dev-tools/kunit/style.rst | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/Documentation/dev-tools/kunit/style.rst b/Documentation/dev-tools/kunit/style.rst index b6d0d7359f00..1538835cd0e2 100644 --- a/Documentation/dev-tools/kunit/style.rst +++ b/Documentation/dev-tools/kunit/style.rst @@ -188,15 +188,20 @@ For example, a Kconfig entry might look like: Test File and Module Names ========================== -KUnit tests can often be compiled as a module. These modules should be named -after the test suite, followed by ``_test``. If this is likely to conflict with -non-KUnit tests, the suffix ``_kunit`` can also be used. - -The easiest way of achieving this is to name the file containing the test suite -``<suite>_test.c`` (or, as above, ``<suite>_kunit.c``). This file should be -placed next to the code under test. +Whether a KUnit test is compiled as a separate module or via an +``#include`` in a core kernel source file, the file should be named +after the test suite, followed by ``_kunit``, and live in a ``tests`` +subdirectory to avoid conflicting with regular modules (e.g. if "foobar" +is the core module, then "foobar_kunit" is the KUnit test module) or the +core kernel source file names (e.g. for tab-completion). Many existing +tests use a ``_test`` suffix, but this is considered deprecated. + +So for the common case, name the file containing the test suite +``tests/<suite>_kunit.c``. The ``tests`` directory should be placed at +the same level as the code under test. For example, tests for +``lib/string.c`` live in ``lib/tests/string_kunit.c``. If the suite name contains some or all of the name of the test's parent -directory, it may make sense to modify the source filename to reduce redundancy. -For example, a ``foo_firmware`` suite could be in the ``foo/firmware_test.c`` -file. +directory, it may make sense to modify the source filename to reduce +redundancy. For example, a ``foo_firmware`` suite could be in the +``tests/foo/firmware_kunit.c`` file. -- 2.34.1

1 year, 1 month

4
7
0 0

[PATCH bpf-next 00/15] use network helpers, part 11

by Geliang Tang

From: Geliang Tang <tanggeliang(a)kylinos.cn> This set is part 11 of series "use network helpers" all BPF selftests wide. Finally something new in this set. The helper make_sockaddr is extended to support sockets of AF_PACKET, AF_ALG and AF_VSOCK families. Then these types of sockets can be used to start_server_str() helper too. Imitating connect_to_* interfaces, send_to_* interfaces are added to support sendto() with given FD or the address string. Add more conditions to control listen: nolisten flag, listen_support() helper and clear "type" bits for listen. Patch 1 for AF_UNIX socket: Patch 1 uses start_server_str for a AF_UNIX socket. Patches 2-6 for AF_PACKET sockets: Patch 2 adds AF_PACKET support for make_sockaddr. Patch 3 uses start_server_str for a AF_PACKET socket. Patches 4-5 adds send_to_fd_opts/send_to_addr_str helpers. Patch 6 uses send_to_addr_str for a AF_PACKET socket. Patches 7-9 for AF_ALG sockets: Patch 7 adds AF_ALG support for make_sockaddr. Patch 8 add nolisten flag, needed by patch 9. Patch 9 uses send_to_addr_str for a AF_ALG socket. Patches 10-15 for AF_VSOCK sockets: Patch 10 adds AF_VSOCK support for make_sockaddr. Patches 11-12 uses make_sockaddr for AF_VSOCK sockets. Patches 13-14 adds more conditions to control listen. Patch 15 uses start_server_str for AF_VSOCK sockets. Geliang Tang (15): selftests/bpf: Use start_server_str in skc_to_unix_sock selftests/bpf: AF_PACKET support for make_sockaddr selftests/bpf: Use start_server_str in lwt_redirect selftests/bpf: Add send_to_fd_opts helper selftests/bpf: Add send_to_addr_str helper selftests/bpf: Use send_to_addr_str in xdp_bonding selftests/bpf: AF_ALG support for make_sockaddr selftests/bpf: Add nolisten for network_helper_opts selftests/bpf: Use start_server_str in crypto_sanity selftests/bpf: AF_VSOCK support for make_sockaddr selftests/bpf: Add loopback_addr_str helper selftests/bpf: Use make_sockaddr in sockmap_helpers selftests/bpf: Check listen support for start_server_addr selftests/bpf: Clear type bits for start_server_addr selftests/bpf: Use start_server_str in sockmap_helpers tools/testing/selftests/bpf/network_helpers.c | 144 +++++++++++++++--- tools/testing/selftests/bpf/network_helpers.h | 21 +++ .../selftests/bpf/prog_tests/crypto_sanity.c | 12 +- .../selftests/bpf/prog_tests/lwt_redirect.c | 21 +-- .../bpf/prog_tests/migrate_reuseport.c | 2 +- .../bpf/prog_tests/skc_to_unix_sock.c | 22 +-- .../bpf/prog_tests/sockmap_helpers.h | 101 +++--------- .../selftests/bpf/prog_tests/xdp_bonding.c | 20 +-- 8 files changed, 186 insertions(+), 157 deletions(-) -- 2.43.0

1 year, 1 month

2
19
0 0

[RESEND PATCH v2] selftests:Fix printf format string in kselftest_harness.h

by Zhu Jun

'%u' in format string requires 'unsigned int' in __wait_for_test() but the argument type is 'signed int' that this problem was discovered by reading code Signed-off-by: Zhu Jun <zhujun2(a)cmss.chinamobile.com> --- Changes in v2: - modify commit info add how to find the problem in the log tools/testing/selftests/kselftest_harness.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index b634969cbb6f..dbbbcc6c04ee 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -1084,7 +1084,7 @@ void __wait_for_test(struct __test_metadata *t) } } else { fprintf(TH_LOG_STREAM, - "# %s: Test ended in some other way [%u]\n", + "# %s: Test ended in some other way [%d]\n", t->name, status); } -- 2.17.1

1 year, 1 month

2
1
0 0

[RESEND bpf-next v2] selftests/bpf:fix a resource leak

by Zhu Jun

The requested resources should be closed before return in main(), otherwise resource leak will occur Signed-off-by: Zhu Jun <zhujun2(a)cmss.chinamobile.com> --- Changes in v2: - check for cg_fd >= 0 and have just one out label tools/testing/selftests/bpf/test_sockmap.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/bpf/test_sockmap.c b/tools/testing/selftests/bpf/test_sockmap.c index a34e95040994..285a9a714666 100644 --- a/tools/testing/selftests/bpf/test_sockmap.c +++ b/tools/testing/selftests/bpf/test_sockmap.c @@ -2075,8 +2075,10 @@ int main(int argc, char **argv) if (!cg_fd) { cg_fd = cgroup_setup_and_join(CG_PATH); - if (cg_fd < 0) - return cg_fd; + if (cg_fd < 0) { + err = cg_fd; + goto out; + } cg_created = 1; } @@ -2092,7 +2094,7 @@ int main(int argc, char **argv) if (err) { fprintf(stderr, "populate program: (%s) %s\n", bpf_file, strerror(errno)); - return 1; + goto out; } running = 1; @@ -2109,7 +2111,8 @@ int main(int argc, char **argv) free(options.whitelist); if (options.blacklist) free(options.blacklist); - close(cg_fd); + if (cg_fd >= 0) + close(cg_fd); if (cg_created) cleanup_cgroup_environment(); return err; -- 2.17.1

1 year, 1 month

1
0
0 0

[PATCH bpf-next v1] selftests/bpf: Fix wrong binary in Makefile log output

by Tony Ambardar

Make log output incorrectly shows 'test_maps' as the binary name for every 'CLNG-BPF' build step, apparently picking up the last value defined for the $(TRUNNER_BINARY) variable. Update the 'CLANG_BPF_BUILD_RULE' variants to fix this confusing output. Current output: CLNG-BPF [test_maps] access_map_in_map.bpf.o GEN-SKEL [test_progs] access_map_in_map.skel.h ... CLNG-BPF [test_maps] access_map_in_map.bpf.o GEN-SKEL [test_progs-no_alu32] access_map_in_map.skel.h ... CLNG-BPF [test_maps] access_map_in_map.bpf.o GEN-SKEL [test_progs-cpuv4] access_map_in_map.skel.h After fix: CLNG-BPF [test_progs] access_map_in_map.bpf.o GEN-SKEL [test_progs] access_map_in_map.skel.h ... CLNG-BPF [test_progs-no_alu32] access_map_in_map.bpf.o GEN-SKEL [test_progs-no_alu32] access_map_in_map.skel.h ... CLNG-BPF [test_progs-cpuv4] access_map_in_map.bpf.o GEN-SKEL [test_progs-cpuv4] access_map_in_map.skel.h Fixes: a5d0c26a2784 ("selftests/bpf: Add a cpuv4 test runner for cpu=v4 testing") Fixes: 89ad7420b25c ("selftests/bpf: Drop the need for LLVM's llc") Signed-off-by: Tony Ambardar <tony.ambardar(a)gmail.com> --- tools/testing/selftests/bpf/Makefile | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 0b4bfbc0ef68..67921e3367dd 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -425,27 +425,28 @@ $(OUTPUT)/flow_dissector_load.o: flow_dissector_load.h $(OUTPUT)/cgroup_getset_retval_hooks.o: cgroup_getset_retval_hooks.h # Build BPF object using Clang -# $1 - input .c file -# $2 - output .o file -# $3 - CFLAGS +# $1 - binary name +# $2 - input .c file +# $3 - output .o file +# $4 - CFLAGS define CLANG_BPF_BUILD_RULE - $(call msg,CLNG-BPF,$(TRUNNER_BINARY),$2) - $(Q)$(CLANG) $3 -O2 --target=bpf -c $1 -mcpu=v3 -o $2 + $(call msg,CLNG-BPF,$1,$3) + $(Q)$(CLANG) $4 -O2 --target=bpf -c $2 -mcpu=v3 -o $3 endef # Similar to CLANG_BPF_BUILD_RULE, but with disabled alu32 define CLANG_NOALU32_BPF_BUILD_RULE - $(call msg,CLNG-BPF,$(TRUNNER_BINARY),$2) - $(Q)$(CLANG) $3 -O2 --target=bpf -c $1 -mcpu=v2 -o $2 + $(call msg,CLNG-BPF,$1,$3) + $(Q)$(CLANG) $4 -O2 --target=bpf -c $2 -mcpu=v2 -o $3 endef # Similar to CLANG_BPF_BUILD_RULE, but with cpu-v4 define CLANG_CPUV4_BPF_BUILD_RULE - $(call msg,CLNG-BPF,$(TRUNNER_BINARY),$2) - $(Q)$(CLANG) $3 -O2 --target=bpf -c $1 -mcpu=v4 -o $2 + $(call msg,CLNG-BPF,$1,$3) + $(Q)$(CLANG) $4 -O2 --target=bpf -c $2 -mcpu=v4 -o $3 endef # Build BPF object using GCC define GCC_BPF_BUILD_RULE - $(call msg,GCC-BPF,$(TRUNNER_BINARY),$2) - $(Q)$(BPF_GCC) $3 -DBPF_NO_PRESERVE_ACCESS_INDEX -Wno-attributes -O2 -c $1 -o $2 + $(call msg,GCC-BPF,$1,$3) + $(Q)$(BPF_GCC) $4 -DBPF_NO_PRESERVE_ACCESS_INDEX -Wno-attributes -O2 -c $2 -o $3 endef SKEL_BLACKLIST := btf__% test_pinning_invalid.c test_sk_assign.c @@ -534,7 +535,7 @@ $(TRUNNER_BPF_OBJS): $(TRUNNER_OUTPUT)/%.bpf.o: \ $(wildcard $(BPFDIR)/bpf_*.h) \ $(wildcard $(BPFDIR)/*.bpf.h) \ | $(TRUNNER_OUTPUT) $$(BPFOBJ) - $$(call $(TRUNNER_BPF_BUILD_RULE),$$<,$$@, \ + $$(call $(TRUNNER_BPF_BUILD_RULE),$(TRUNNER_BINARY),$$<,$$@, \ $(TRUNNER_BPF_CFLAGS) \ $$($$<-CFLAGS) \ $$($$<-$2-CFLAGS)) -- 2.34.1

1 year, 1 month

4
8
0 0

[PATCH bpf-next v1 0/2] selftests/bpf: Add support for MIPS systems

by Tony Ambardar

Hello, This series includes two fixes to support builds targeting MIPS systems. The patches have been tested both with the kernel-patches/bpf CI and locally using mips64el-gcc/musl-libc and QEMU with an OpenWrt rootfs. Patch 1 adds support for MIPS system includes when compiling BPF. Patch 2 fixes a MIPS GOT issue when linking uprobe_multi. Feedback and suggestions for improvement are welcome! Thanks, Tony Tony Ambardar (2): selftests/bpf: Add missing system defines for mips selftests/bpf: Fix error linking uprobe_multi on mips tools/testing/selftests/bpf/Makefile | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) -- 2.34.1

1 year, 1 month

3
8
0 0

mm, memcg: cg2 memory{.swap,}.peak write handlers

by David Finkel

This is an updated patchset following some excellent comments from Roman and Longman. [1] As suggested, I've broken this into two commits: 1) with the implementation changes 2) extending the tests tests I haven't been able to induce anything problematic, but I'm a bit unclear as to whether there's reference counting on cgroups such that we don't need to handle the case where the cgroup is freed before the one of the peak files is closed. Documentation/admin-guide/cgroup-v2.rst | 26 ++- include/linux/cgroup.h | 8 + include/linux/memcontrol.h | 5 + include/linux/page_counter.h | 11 +- kernel/cgroup/cgroup-internal.h | 2 + kernel/cgroup/cgroup.c | 7 + mm/memcontrol.c | 129 +++++++++++++-- mm/page_counter.c | 36 ++++- tools/testing/selftests/cgroup/cgroup_util.c | 22 +++ tools/testing/selftests/cgroup/cgroup_util.h | 2 + tools/testing/selftests/cgroup/test_memcontrol.c | 227 ++++++++++++++++++++++++++- 11 files changed, 444 insertions(+), 31 deletions(-) [1]: https://lore.kernel.org/cgroups/20240722151713.2724855-1-davidf@vimeo.com/T/ Thank you for your efforts and reviews, David Finkel Senior Principal Software Engineer Vimeo Inc.

1 year, 1 month

2
4
0 0

[PATCH bpf-next 0/4] use network helpers, part 10

by Geliang Tang

From: Geliang Tang <tanggeliang(a)kylinos.cn> This set is part 10 of series "use network helpers" all BPF selftests wide. Patches 1-3 drop local functions make_client(), make_socket() and inetaddr_len() in sk_lookup.c. Patch 4 drops a useless function __start_server() in network_helpers.c. Geliang Tang (4): selftests/bpf: Drop make_client in sk_lookup selftests/bpf: Drop make_socket in sk_lookup selftests/bpf: Drop inetaddr_len in sk_lookup selftests/bpf: Drop __start_server in network_helpers tools/testing/selftests/bpf/network_helpers.c | 26 ++--- .../selftests/bpf/prog_tests/sk_lookup.c | 110 +++++------------- 2 files changed, 40 insertions(+), 96 deletions(-) -- 2.43.0

1 year, 1 month

2
5
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror