- Linux-kselftest-mirror - lists.linaro.org

[RFC PATCH 0/3] Allow sk_lookup UDP return traffic to egress.

by Tiago Lam

Currently, sk_lookup allows an ebpf program to run on the ingress socket lookup path, and accept traffic not only on a range of addresses, but also on a range of ports. At Cloudflare we use sk_lookup for two main cases: 1. Sharing a single port between multiple services - i.e. two services (or more) use disjoint IP ranges but share the same port; 2. Receiving traffic on all ports - i.e. a service which accepts traffic on specific IP ranges but any port [1]. However, one main challenge we face while using sk_lookup for these use cases is how to source return UDP traffic: - On point 1. above, sometimes this range of addresses are not local (i.e. there's no local routes for these in the server), which means we need IP_TRANSPARENT set to be able to egress traffic from addresses we've received traffic on (or simply IP_FREEBIND in the case of IPv6); - And on point 2. above, allowing traffic to a range of ports means a service could get traffic on multiple ports, but currently there's no way to set the source UDP port egress traffic should be sourced from - it's possible to receive the original destination port using the IP_ORIGDSTADDR ancilliary message in recvmsg, but not set it in sendmsg. Both of these limitations can be worked around, but in a sub-optimal way. Using IP_TRANSPARENT, for instance, requires special privileges. And while one could use UDP connected sockets to send return traffic, creating a connected socket for each different address a UDP traffic is received on does have performance implications. Given sk_lookup allows services to accept traffic on a range of addresses or ports, it seems sensible to also allow return traffic to proceed through as well, without needing extra configurations / set ups. This patch set allows to do exactly this by performing a reverse socket lookup on the egress path - where it looks to see if the egress socket matches a socket in the attached sk_lookup ebpf program for the traffic that's being sent. If it does, traffic is allowed to proceed. The downsides to this is that this runs on the egress hot path, although this work tries to minimise its impact by only performing the reverse socket lookup when necessary. Further performance measurements are to be taken, but we're reaching out early for feedback to see what the technical concerns are and if we can address them. [1] https://blog.cloudflare.com/how-we-built-spectrum/ Suggested-by: Jakub Sitnicki <jakub(a)cloudflare.com> Signed-off-by: Tiago Lam <tiagolam(a)cloudflare.com> --- Tiago Lam (3): ipv4: Run a reverse sk_lookup on sendmsg. ipv6: Run a reverse sk_lookup on sendmsg. bpf: Add sk_lookup test to use ORIGDSTADDR cmsg. include/net/ip.h | 1 + net/ipv4/ip_sockglue.c | 11 ++++ net/ipv4/udp.c | 33 +++++++++- net/ipv6/datagram.c | 76 ++++++++++++++++++++++ net/ipv6/udp.c | 8 ++- tools/testing/selftests/bpf/prog_tests/sk_lookup.c | 70 +++++++++++++------- 6 files changed, 174 insertions(+), 25 deletions(-) --- base-commit: da3ea35007d0af457a0afc87e84fddaebc4e0b63 change-id: 20240909-reverse-sk-lookup-f7bf36292bc4 Best regards, -- Tiago Lam <tiagolam(a)cloudflare.com>

1 year, 3 months

6
15
0 0

[PATCH] lib: Move KUnit tests into tests/ subdirectory

by Kees Cook

Following from the recent KUnit file naming discussion[1], move all KUnit tests in lib/ into lib/tests/. Link: https://lore.kernel.org/lkml/20240720165441.it.320-kees@kernel.org/ [1] Signed-off-by: Kees Cook <kees(a)kernel.org> --- I can carry this in the hardening tree. To disrupt people as little as possible, I'm hoping to send this either at the end of -rc1 or early in -rc2. Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Yury Norov <yury.norov(a)gmail.com> Cc: Rasmus Villemoes <linux(a)rasmusvillemoes.dk> Cc: David Gow <davidgow(a)google.com> Cc: "Jason A. Donenfeld" <Jason(a)zx2c4.com> Cc: Andy Shevchenko <andy(a)kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao(a)linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy(a)intel.com> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Mark Brown <broonie(a)kernel.org> Cc: Matti Vaittinen <mazziesaccount(a)gmail.com> Cc: linux-hardening(a)vger.kernel.org Cc: linux-kselftest(a)vger.kernel.org Cc: kunit-dev(a)googlegroups.com Cc: linux-trace-kernel(a)vger.kernel.org --- MAINTAINERS | 18 ++++++------- lib/Makefile | 35 +----------------------- lib/tests/Makefile | 37 ++++++++++++++++++++++++++ lib/{ => tests}/bitfield_kunit.c | 0 lib/{ => tests}/checksum_kunit.c | 0 lib/{ => tests}/cmdline_kunit.c | 0 lib/{ => tests}/cpumask_kunit.c | 0 lib/{ => tests}/fortify_kunit.c | 0 lib/{ => tests}/hashtable_test.c | 0 lib/{ => tests}/is_signed_type_kunit.c | 0 lib/{ => tests}/kunit_iov_iter.c | 0 lib/{ => tests}/list-test.c | 0 lib/{ => tests}/memcpy_kunit.c | 0 lib/{ => tests}/overflow_kunit.c | 0 lib/{ => tests}/siphash_kunit.c | 0 lib/{ => tests}/slub_kunit.c | 0 lib/{ => tests}/stackinit_kunit.c | 0 lib/{ => tests}/string_helpers_kunit.c | 0 lib/{ => tests}/string_kunit.c | 0 lib/{ => tests}/test_bits.c | 0 lib/{ => tests}/test_fprobe.c | 0 lib/{ => tests}/test_hash.c | 0 lib/{ => tests}/test_kprobes.c | 0 lib/{ => tests}/test_linear_ranges.c | 0 lib/{ => tests}/test_list_sort.c | 0 lib/{ => tests}/test_sort.c | 0 26 files changed, 47 insertions(+), 43 deletions(-) create mode 100644 lib/tests/Makefile rename lib/{ => tests}/bitfield_kunit.c (100%) rename lib/{ => tests}/checksum_kunit.c (100%) rename lib/{ => tests}/cmdline_kunit.c (100%) rename lib/{ => tests}/cpumask_kunit.c (100%) rename lib/{ => tests}/fortify_kunit.c (100%) rename lib/{ => tests}/hashtable_test.c (100%) rename lib/{ => tests}/is_signed_type_kunit.c (100%) rename lib/{ => tests}/kunit_iov_iter.c (100%) rename lib/{ => tests}/list-test.c (100%) rename lib/{ => tests}/memcpy_kunit.c (100%) rename lib/{ => tests}/overflow_kunit.c (100%) rename lib/{ => tests}/siphash_kunit.c (100%) rename lib/{ => tests}/slub_kunit.c (100%) rename lib/{ => tests}/stackinit_kunit.c (100%) rename lib/{ => tests}/string_helpers_kunit.c (100%) rename lib/{ => tests}/string_kunit.c (100%) rename lib/{ => tests}/test_bits.c (100%) rename lib/{ => tests}/test_fprobe.c (100%) rename lib/{ => tests}/test_hash.c (100%) rename lib/{ => tests}/test_kprobes.c (100%) rename lib/{ => tests}/test_linear_ranges.c (100%) rename lib/{ => tests}/test_list_sort.c (100%) rename lib/{ => tests}/test_sort.c (100%) diff --git a/MAINTAINERS b/MAINTAINERS index 8754ac2c259d..3f4b9d007cbb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3737,10 +3737,10 @@ F: include/vdso/bits.h F: lib/bitmap-str.c F: lib/bitmap.c F: lib/cpumask.c -F: lib/cpumask_kunit.c F: lib/find_bit.c F: lib/find_bit_benchmark.c F: lib/test_bitmap.c +F: lib/tests/cpumask_kunit.c F: tools/include/linux/bitfield.h F: tools/include/linux/bitmap.h F: tools/include/linux/bits.h @@ -8618,9 +8618,9 @@ L: linux-hardening(a)vger.kernel.org S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening F: include/linux/fortify-string.h -F: lib/fortify_kunit.c -F: lib/memcpy_kunit.c F: lib/test_fortify/* +F: lib/tests/fortify_kunit.c +F: lib/tests/memcpy_kunit.c F: scripts/test_fortify.sh K: \b__NO_FORTIFY\b @@ -9246,9 +9246,9 @@ F: include/linux/string.h F: include/linux/string_choices.h F: include/linux/string_helpers.h F: lib/string.c -F: lib/string_kunit.c F: lib/string_helpers.c -F: lib/string_helpers_kunit.c +F: lib/tests/string_helpers_kunit.c +F: lib/tests/string_kunit.c F: scripts/coccinelle/api/string_choices.cocci GENERIC UIO DRIVER FOR PCI DEVICES @@ -12347,7 +12347,7 @@ F: Documentation/trace/kprobes.rst F: include/asm-generic/kprobes.h F: include/linux/kprobes.h F: kernel/kprobes.c -F: lib/test_kprobes.c +F: lib/tests/test_kprobes.c F: samples/kprobes KS0108 LCD CONTROLLER DRIVER @@ -12697,7 +12697,7 @@ M: Mark Brown <broonie(a)kernel.org> R: Matti Vaittinen <mazziesaccount(a)gmail.com> F: include/linux/linear_range.h F: lib/linear_ranges.c -F: lib/test_linear_ranges.c +F: lib/tests/test_linear_ranges.c LINUX FOR POWER MACINTOSH L: linuxppc-dev(a)lists.ozlabs.org @@ -12824,7 +12824,7 @@ M: David Gow <davidgow(a)google.com> L: linux-kselftest(a)vger.kernel.org L: kunit-dev(a)googlegroups.com S: Maintained -F: lib/list-test.c +F: lib/tests/list-test.c LITEX PLATFORM M: Karol Gugala <kgugala(a)antmicro.com> @@ -20498,7 +20498,7 @@ M: Jason A. Donenfeld <Jason(a)zx2c4.com> S: Maintained F: include/linux/siphash.h F: lib/siphash.c -F: lib/siphash_kunit.c +F: lib/tests/siphash_kunit.c SIS 190 ETHERNET DRIVER M: Francois Romieu <romieu(a)fr.zoreil.com> diff --git a/lib/Makefile b/lib/Makefile index 3b1769045651..f00fe120ee9e 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -49,9 +49,7 @@ obj-y += bcd.o sort.o parser.o debug_locks.o random32.o \ percpu-refcount.o rhashtable.o base64.o \ once.o refcount.o rcuref.o usercopy.o errseq.o bucket_locks.o \ generic-radix-tree.o bitmap-str.o -obj-$(CONFIG_STRING_KUNIT_TEST) += string_kunit.o obj-y += string_helpers.o -obj-$(CONFIG_STRING_HELPERS_KUNIT_TEST) += string_helpers_kunit.o obj-y += hexdump.o obj-$(CONFIG_TEST_HEXDUMP) += test_hexdump.o obj-y += kstrtox.o @@ -62,22 +60,17 @@ obj-$(CONFIG_TEST_DHRY) += test_dhry.o obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o obj-$(CONFIG_TEST_BITOPS) += test_bitops.o CFLAGS_test_bitops.o += -Werror -obj-$(CONFIG_CPUMASK_KUNIT_TEST) += cpumask_kunit.o obj-$(CONFIG_TEST_SYSCTL) += test_sysctl.o -obj-$(CONFIG_TEST_IOV_ITER) += kunit_iov_iter.o -obj-$(CONFIG_HASH_KUNIT_TEST) += test_hash.o obj-$(CONFIG_TEST_IDA) += test_ida.o obj-$(CONFIG_TEST_UBSAN) += test_ubsan.o CFLAGS_test_ubsan.o += $(call cc-disable-warning, vla) CFLAGS_test_ubsan.o += $(call cc-disable-warning, unused-but-set-variable) UBSAN_SANITIZE_test_ubsan.o := y obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o -obj-$(CONFIG_TEST_LIST_SORT) += test_list_sort.o obj-$(CONFIG_TEST_MIN_HEAP) += test_min_heap.o obj-$(CONFIG_TEST_LKM) += test_module.o obj-$(CONFIG_TEST_VMALLOC) += test_vmalloc.o obj-$(CONFIG_TEST_RHASHTABLE) += test_rhashtable.o -obj-$(CONFIG_TEST_SORT) += test_sort.o obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o @@ -104,10 +97,7 @@ obj-$(CONFIG_TEST_MEMINIT) += test_meminit.o obj-$(CONFIG_TEST_LOCKUP) += test_lockup.o obj-$(CONFIG_TEST_HMM) += test_hmm.o obj-$(CONFIG_TEST_FREE_PAGES) += test_free_pages.o -obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o obj-$(CONFIG_TEST_REF_TRACKER) += test_ref_tracker.o -CFLAGS_test_fprobe.o += $(CC_FLAGS_FTRACE) -obj-$(CONFIG_FPROBE_SANITY_TEST) += test_fprobe.o obj-$(CONFIG_TEST_OBJPOOL) += test_objpool.o obj-$(CONFIG_TEST_FPU) += test_fpu.o @@ -129,7 +119,7 @@ endif obj-$(CONFIG_DEBUG_INFO_REDUCED) += debug_info.o CFLAGS_debug_info.o += $(call cc-option, -femit-struct-debug-detailed=any) -obj-y += math/ crypto/ +obj-y += math/ crypto/ tests/ obj-$(CONFIG_GENERIC_IOMAP) += iomap.o obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o @@ -366,29 +356,6 @@ obj-$(CONFIG_OBJAGG) += objagg.o # pldmfw library obj-$(CONFIG_PLDMFW) += pldmfw/ -# KUnit tests -CFLAGS_bitfield_kunit.o := $(DISABLE_STRUCTLEAK_PLUGIN) -obj-$(CONFIG_BITFIELD_KUNIT) += bitfield_kunit.o -obj-$(CONFIG_CHECKSUM_KUNIT) += checksum_kunit.o -obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o -obj-$(CONFIG_HASHTABLE_KUNIT_TEST) += hashtable_test.o -obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o -obj-$(CONFIG_BITS_TEST) += test_bits.o -obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o -obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o -obj-$(CONFIG_MEMCPY_KUNIT_TEST) += memcpy_kunit.o -obj-$(CONFIG_IS_SIGNED_TYPE_KUNIT_TEST) += is_signed_type_kunit.o -CFLAGS_overflow_kunit.o = $(call cc-disable-warning, tautological-constant-out-of-range-compare) -obj-$(CONFIG_OVERFLOW_KUNIT_TEST) += overflow_kunit.o -CFLAGS_stackinit_kunit.o += $(call cc-disable-warning, switch-unreachable) -obj-$(CONFIG_STACKINIT_KUNIT_TEST) += stackinit_kunit.o -CFLAGS_fortify_kunit.o += $(call cc-disable-warning, unsequenced) -CFLAGS_fortify_kunit.o += $(call cc-disable-warning, stringop-overread) -CFLAGS_fortify_kunit.o += $(call cc-disable-warning, stringop-truncation) -CFLAGS_fortify_kunit.o += $(DISABLE_STRUCTLEAK_PLUGIN) -obj-$(CONFIG_FORTIFY_KUNIT_TEST) += fortify_kunit.o -obj-$(CONFIG_SIPHASH_KUNIT_TEST) += siphash_kunit.o - obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o obj-$(CONFIG_FIRMWARE_TABLE) += fw_table.o diff --git a/lib/tests/Makefile b/lib/tests/Makefile new file mode 100644 index 000000000000..c6a14cc8663e --- /dev/null +++ b/lib/tests/Makefile @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for tests of kernel library functions. + +# KUnit tests +CFLAGS_bitfield_kunit.o := $(DISABLE_STRUCTLEAK_PLUGIN) +obj-$(CONFIG_BITFIELD_KUNIT) += bitfield_kunit.o +obj-$(CONFIG_BITS_TEST) += test_bits.o +obj-$(CONFIG_CHECKSUM_KUNIT) += checksum_kunit.o +obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o +obj-$(CONFIG_CPUMASK_KUNIT_TEST) += cpumask_kunit.o +CFLAGS_fortify_kunit.o += $(call cc-disable-warning, unsequenced) +CFLAGS_fortify_kunit.o += $(call cc-disable-warning, stringop-overread) +CFLAGS_fortify_kunit.o += $(call cc-disable-warning, stringop-truncation) +CFLAGS_fortify_kunit.o += $(DISABLE_STRUCTLEAK_PLUGIN) +obj-$(CONFIG_FORTIFY_KUNIT_TEST) += fortify_kunit.o +CFLAGS_test_fprobe.o += $(CC_FLAGS_FTRACE) +obj-$(CONFIG_FPROBE_SANITY_TEST) += test_fprobe.o +obj-$(CONFIG_HASHTABLE_KUNIT_TEST) += hashtable_test.o +obj-$(CONFIG_HASH_KUNIT_TEST) += test_hash.o +obj-$(CONFIG_TEST_IOV_ITER) += kunit_iov_iter.o +obj-$(CONFIG_IS_SIGNED_TYPE_KUNIT_TEST) += is_signed_type_kunit.o +obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o +obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o +obj-$(CONFIG_TEST_LIST_SORT) += test_list_sort.o +obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o +obj-$(CONFIG_MEMCPY_KUNIT_TEST) += memcpy_kunit.o +CFLAGS_overflow_kunit.o = $(call cc-disable-warning, tautological-constant-out-of-range-compare) +obj-$(CONFIG_OVERFLOW_KUNIT_TEST) += overflow_kunit.o +obj-$(CONFIG_SIPHASH_KUNIT_TEST) += siphash_kunit.o +obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o +obj-$(CONFIG_TEST_SORT) += test_sort.o +CFLAGS_stackinit_kunit.o += $(call cc-disable-warning, switch-unreachable) +obj-$(CONFIG_STACKINIT_KUNIT_TEST) += stackinit_kunit.o +obj-$(CONFIG_STRING_KUNIT_TEST) += string_kunit.o +obj-$(CONFIG_STRING_HELPERS_KUNIT_TEST) += string_helpers_kunit.o + diff --git a/lib/bitfield_kunit.c b/lib/tests/bitfield_kunit.c similarity index 100% rename from lib/bitfield_kunit.c rename to lib/tests/bitfield_kunit.c diff --git a/lib/checksum_kunit.c b/lib/tests/checksum_kunit.c similarity index 100% rename from lib/checksum_kunit.c rename to lib/tests/checksum_kunit.c diff --git a/lib/cmdline_kunit.c b/lib/tests/cmdline_kunit.c similarity index 100% rename from lib/cmdline_kunit.c rename to lib/tests/cmdline_kunit.c diff --git a/lib/cpumask_kunit.c b/lib/tests/cpumask_kunit.c similarity index 100% rename from lib/cpumask_kunit.c rename to lib/tests/cpumask_kunit.c diff --git a/lib/fortify_kunit.c b/lib/tests/fortify_kunit.c similarity index 100% rename from lib/fortify_kunit.c rename to lib/tests/fortify_kunit.c diff --git a/lib/hashtable_test.c b/lib/tests/hashtable_test.c similarity index 100% rename from lib/hashtable_test.c rename to lib/tests/hashtable_test.c diff --git a/lib/is_signed_type_kunit.c b/lib/tests/is_signed_type_kunit.c similarity index 100% rename from lib/is_signed_type_kunit.c rename to lib/tests/is_signed_type_kunit.c diff --git a/lib/kunit_iov_iter.c b/lib/tests/kunit_iov_iter.c similarity index 100% rename from lib/kunit_iov_iter.c rename to lib/tests/kunit_iov_iter.c diff --git a/lib/list-test.c b/lib/tests/list-test.c similarity index 100% rename from lib/list-test.c rename to lib/tests/list-test.c diff --git a/lib/memcpy_kunit.c b/lib/tests/memcpy_kunit.c similarity index 100% rename from lib/memcpy_kunit.c rename to lib/tests/memcpy_kunit.c diff --git a/lib/overflow_kunit.c b/lib/tests/overflow_kunit.c similarity index 100% rename from lib/overflow_kunit.c rename to lib/tests/overflow_kunit.c diff --git a/lib/siphash_kunit.c b/lib/tests/siphash_kunit.c similarity index 100% rename from lib/siphash_kunit.c rename to lib/tests/siphash_kunit.c diff --git a/lib/slub_kunit.c b/lib/tests/slub_kunit.c similarity index 100% rename from lib/slub_kunit.c rename to lib/tests/slub_kunit.c diff --git a/lib/stackinit_kunit.c b/lib/tests/stackinit_kunit.c similarity index 100% rename from lib/stackinit_kunit.c rename to lib/tests/stackinit_kunit.c diff --git a/lib/string_helpers_kunit.c b/lib/tests/string_helpers_kunit.c similarity index 100% rename from lib/string_helpers_kunit.c rename to lib/tests/string_helpers_kunit.c diff --git a/lib/string_kunit.c b/lib/tests/string_kunit.c similarity index 100% rename from lib/string_kunit.c rename to lib/tests/string_kunit.c diff --git a/lib/test_bits.c b/lib/tests/test_bits.c similarity index 100% rename from lib/test_bits.c rename to lib/tests/test_bits.c diff --git a/lib/test_fprobe.c b/lib/tests/test_fprobe.c similarity index 100% rename from lib/test_fprobe.c rename to lib/tests/test_fprobe.c diff --git a/lib/test_hash.c b/lib/tests/test_hash.c similarity index 100% rename from lib/test_hash.c rename to lib/tests/test_hash.c diff --git a/lib/test_kprobes.c b/lib/tests/test_kprobes.c similarity index 100% rename from lib/test_kprobes.c rename to lib/tests/test_kprobes.c diff --git a/lib/test_linear_ranges.c b/lib/tests/test_linear_ranges.c similarity index 100% rename from lib/test_linear_ranges.c rename to lib/tests/test_linear_ranges.c diff --git a/lib/test_list_sort.c b/lib/tests/test_list_sort.c similarity index 100% rename from lib/test_list_sort.c rename to lib/tests/test_list_sort.c diff --git a/lib/test_sort.c b/lib/tests/test_sort.c similarity index 100% rename from lib/test_sort.c rename to lib/tests/test_sort.c -- 2.34.1

1 year, 3 months

5
6
0 0

[PATCH v2 0/1] Add KUnit tests for kfifo

by Diego Vieira

Hi all, This is part of a hackathon organized by LKCAMP [1], focused on writing tests using KUnit. We reached out a while ago asking for advice on what would be a useful contribution [2] and ended up choosing data structures that did not yet have tests. This patch series depends on the patch that moves the KUnit tests on lib/ into lib/tests/ [3]. This patch adds tests for the kfifo data structure, defined in include/linux/kfifo.h, and is inspired by the KUnit tests for the doubly linked list in lib/tests/list-test.c (previously at lib/list-test.c) [4]. [1] https://lkcamp.dev/about/ [2] https://lore.kernel.org/all/Zktnt7rjKryTh9-N@arch/ [3] https://lore.kernel.org/all/20240720181025.work.002-kees@kernel.org/ [4] https://elixir.bootlin.com/linux/latest/source/lib/list-test.c --- Changes in v2: - Add MODULE_DESCRIPTION() - Move the tests from lib/kfifo-test.c to lib/tests/kfifo_kunit.c Diego Vieira (1): lib/tests/kfifo_kunit.c: add tests for the kfifo structure lib/Kconfig.debug | 14 +++ lib/tests/Makefile | 1 + lib/tests/kfifo_kunit.c | 224 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 239 insertions(+) create mode 100644 lib/tests/kfifo_kunit.c -- 2.34.1

1 year, 3 months

5
5
0 0

[PATCH,bpf-next v2 0/4] selftests/bpf: migrate and remove cgroup/tracing related tests

by Daniel T. Lee

The BPF testing framework has evolved significantly over time. However, some legacy tests in the samples/bpf directory have not kept up with these changes. These outdated tests can cause confusion and increase maintenance efforts. This patchset focuses on migrating outdated cgroup and tracing-related tests from samples/bpf to selftests/bpf, ensuring the BPF test suite remains current and efficient. Tests that are already covered by selftests/bpf are removed, while those not yet covered are migrated. This includes cgroup sock create tests for setting socket attributes and blocking socket creation, as well as the removal of redundant cgroup and tracing tests that have been replaced by newer tests. This patchset covers the following cgroup/tracing tests: - test_overhead: tests the overhead of BPF programs with task_rename, now covered by selftests and benchmark tests (rename-*). [1] - test_override_return: tests the return override functionality, now handled by kprobe_multi_override in selftests. - test_probe_write_user: tests the probe_write_user functionality, now replaced by the probe_user test in selftests. - test_cgrp2_sock: tests cgroup BPF's ability to set sk_bound_dev_if, mark, and priority during socket creation. Migrated to selftests as 'sock_create' since no existing tests fully cover this. - test_cgrp2_sock2: tests blocking socket creation for specific types (AF_INET{6}, SOCK_DGRAM, IPPROTO_ICMP{V6}). Migrated to selftests in 'sock_create' test for coverage. - test_current_task_under_cgroup: tests bpf_current_task_under_cgroup() to check if a task belongs to a cgroup. Already covered by task_under_cgroup at selftest and other cgroup ID tests. - test_cgrp2_tc: tests bpf_skb_under_cgroup() to filter packets based on cgroup. This behavior is now validated by cgroup_skb_sk_lookup, which uses bpf_skb_cgroup_id, making this test redundant. [1]: https://patchwork.kernel.org/cover/13759916 Daniel T. Lee (4): selftests/bpf: migrate cgroup sock create test for setting iface/mark/prio selftests/bpf: migrate cgroup sock create tests for prohibitig sockets samples/bpf: remove obsolete cgroup related tests samples/bpf: remove obsolete tracing related tests --- Changes in v2: - commit message fix samples/bpf/Makefile | 24 -- samples/bpf/sock_flags.bpf.c | 47 --- samples/bpf/test_cgrp2_array_pin.c | 106 ------ samples/bpf/test_cgrp2_attach.c | 177 ---------- samples/bpf/test_cgrp2_sock.c | 296 ---------------- samples/bpf/test_cgrp2_sock.sh | 137 ------- samples/bpf/test_cgrp2_sock2.c | 95 ----- samples/bpf/test_cgrp2_sock2.sh | 103 ------ samples/bpf/test_cgrp2_tc.bpf.c | 56 --- samples/bpf/test_cgrp2_tc.sh | 187 ---------- .../bpf/test_current_task_under_cgroup.bpf.c | 43 --- .../bpf/test_current_task_under_cgroup_user.c | 115 ------ samples/bpf/test_overhead_kprobe.bpf.c | 41 --- samples/bpf/test_overhead_raw_tp.bpf.c | 17 - samples/bpf/test_overhead_tp.bpf.c | 23 -- samples/bpf/test_overhead_user.c | 225 ------------ samples/bpf/test_override_return.sh | 16 - samples/bpf/test_probe_write_user.bpf.c | 52 --- samples/bpf/test_probe_write_user_user.c | 108 ------ samples/bpf/tracex7.bpf.c | 15 - samples/bpf/tracex7_user.c | 56 --- .../selftests/bpf/prog_tests/sock_create.c | 333 ++++++++++++++++++ 22 files changed, 333 insertions(+), 1939 deletions(-) delete mode 100644 samples/bpf/sock_flags.bpf.c delete mode 100644 samples/bpf/test_cgrp2_array_pin.c delete mode 100644 samples/bpf/test_cgrp2_attach.c delete mode 100644 samples/bpf/test_cgrp2_sock.c delete mode 100755 samples/bpf/test_cgrp2_sock.sh delete mode 100644 samples/bpf/test_cgrp2_sock2.c delete mode 100755 samples/bpf/test_cgrp2_sock2.sh delete mode 100644 samples/bpf/test_cgrp2_tc.bpf.c delete mode 100755 samples/bpf/test_cgrp2_tc.sh delete mode 100644 samples/bpf/test_current_task_under_cgroup.bpf.c delete mode 100644 samples/bpf/test_current_task_under_cgroup_user.c delete mode 100644 samples/bpf/test_overhead_kprobe.bpf.c delete mode 100644 samples/bpf/test_overhead_raw_tp.bpf.c delete mode 100644 samples/bpf/test_overhead_tp.bpf.c delete mode 100644 samples/bpf/test_overhead_user.c delete mode 100755 samples/bpf/test_override_return.sh delete mode 100644 samples/bpf/test_probe_write_user.bpf.c delete mode 100644 samples/bpf/test_probe_write_user_user.c delete mode 100644 samples/bpf/tracex7.bpf.c delete mode 100644 samples/bpf/tracex7_user.c create mode 100644 tools/testing/selftests/bpf/prog_tests/sock_create.c -- 2.43.0

1 year, 3 months

1
4
0 0

[bpf-next 0/4] selftests/bpf: migrate and remove cgroup/tracing related tests

by Daniel T. Lee

The BPF testing framework has evolved significantly over time. However, some legacy tests in the samples/bpf directory have not kept up with these changes. These outdated tests can cause confusion and increase maintenance efforts. This patchset focuses on migrating outdated cgroup and tracing-related tests from samples/bpf to selftests/bpf, ensuring the BPF test suite remains current and efficient. Tests that are already covered by selftests/bpf are removed, while those not yet covered are migrated. This includes cgroup sock create tests for setting socket attributes and blocking socket creation, as well as the removal of redundant cgroup and tracing tests that have been replaced by newer tests. This patchset covers the following cgroup/tracing tests: - test_overhead: tests the overhead of BPF programs with task_rename, now covered by selftests and benchmark tests (rename-*). [1] - test_override_return: tests the return override functionality, now handled by kprobe_multi_override in selftests. - test_probe_write_user: tests the probe_write_user functionality, now replaced by the probe_user test in selftests. - test_cgrp2_sock: tests cgroup BPF's ability to set sk_bound_dev_if, mark, and priority during socket creation. Migrated to selftests as 'sock_create' since no existing tests fully cover this. - test_cgrp2_sock2: tests blocking socket creation for specific types (AF_INET{6}, SOCK_DGRAM, IPPROTO_ICMP{V6}). Migrated to selftests in 'sock_create' test for coverage. - test_current_task_under_cgroup: tests bpf_current_task_under_cgroup() to check if a task belongs to a cgroup. Already covered by task_under_cgroup at selftest and other cgroup ID tests. - test_cgrp2_tc: tests bpf_skb_under_cgroup() to filter packets based on cgroup. This behavior is now validated by cgroup_skb_sk_lookup, which uses bpf_skb_cgroup_id, making this test redundant. Daniel T. Lee (4): selftests/bpf: migrate cgroup sock create test for setting iface/mark/prio selftests/bpf: migrate sock create tests for prohibitig sockets samples/bpf: remove obsolete cgroup related tests samples/bpf: remove obsolete tracing related tests samples/bpf/Makefile | 24 -- samples/bpf/sock_flags.bpf.c | 47 --- samples/bpf/test_cgrp2_array_pin.c | 106 ------ samples/bpf/test_cgrp2_attach.c | 177 ---------- samples/bpf/test_cgrp2_sock.c | 296 ---------------- samples/bpf/test_cgrp2_sock.sh | 137 ------- samples/bpf/test_cgrp2_sock2.c | 95 ----- samples/bpf/test_cgrp2_sock2.sh | 103 ------ samples/bpf/test_cgrp2_tc.bpf.c | 56 --- samples/bpf/test_cgrp2_tc.sh | 187 ---------- .../bpf/test_current_task_under_cgroup.bpf.c | 43 --- .../bpf/test_current_task_under_cgroup_user.c | 115 ------ samples/bpf/test_overhead_kprobe.bpf.c | 41 --- samples/bpf/test_overhead_raw_tp.bpf.c | 17 - samples/bpf/test_overhead_tp.bpf.c | 23 -- samples/bpf/test_overhead_user.c | 225 ------------ samples/bpf/test_override_return.sh | 16 - samples/bpf/test_probe_write_user.bpf.c | 52 --- samples/bpf/test_probe_write_user_user.c | 108 ------ samples/bpf/tracex7.bpf.c | 15 - samples/bpf/tracex7_user.c | 56 --- .../selftests/bpf/prog_tests/sock_create.c | 333 ++++++++++++++++++ 22 files changed, 333 insertions(+), 1939 deletions(-) delete mode 100644 samples/bpf/sock_flags.bpf.c delete mode 100644 samples/bpf/test_cgrp2_array_pin.c delete mode 100644 samples/bpf/test_cgrp2_attach.c delete mode 100644 samples/bpf/test_cgrp2_sock.c delete mode 100755 samples/bpf/test_cgrp2_sock.sh delete mode 100644 samples/bpf/test_cgrp2_sock2.c delete mode 100755 samples/bpf/test_cgrp2_sock2.sh delete mode 100644 samples/bpf/test_cgrp2_tc.bpf.c delete mode 100755 samples/bpf/test_cgrp2_tc.sh delete mode 100644 samples/bpf/test_current_task_under_cgroup.bpf.c delete mode 100644 samples/bpf/test_current_task_under_cgroup_user.c delete mode 100644 samples/bpf/test_overhead_kprobe.bpf.c delete mode 100644 samples/bpf/test_overhead_raw_tp.bpf.c delete mode 100644 samples/bpf/test_overhead_tp.bpf.c delete mode 100644 samples/bpf/test_overhead_user.c delete mode 100755 samples/bpf/test_override_return.sh delete mode 100644 samples/bpf/test_probe_write_user.bpf.c delete mode 100644 samples/bpf/test_probe_write_user_user.c delete mode 100644 samples/bpf/tracex7.bpf.c delete mode 100644 samples/bpf/tracex7_user.c create mode 100644 tools/testing/selftests/bpf/prog_tests/sock_create.c -- 2.43.0

1 year, 3 months

1
4
0 0

[PATCH] selftests/bpf: Removed redundant fd after close in bpf_prog_load_log_buf

by Zhu Jun

Removed unnecessary `fd = -1` assignments after closing file descriptors. because it will be assigned by the function bpf_prog_load().This improves code readability and removes redundant operations. Signed-off-by: Zhu Jun <zhujun2(a)cmss.chinamobile.com> --- tools/testing/selftests/bpf/prog_tests/log_buf.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/log_buf.c b/tools/testing/selftests/bpf/prog_tests/log_buf.c index 27676a04d0b6..169ce689b97c 100644 --- a/tools/testing/selftests/bpf/prog_tests/log_buf.c +++ b/tools/testing/selftests/bpf/prog_tests/log_buf.c @@ -169,7 +169,6 @@ static void bpf_prog_load_log_buf(void) ASSERT_GE(fd, 0, "good_fd1"); if (fd >= 0) close(fd); - fd = -1; /* log_level == 2 should always fill log_buf, even for good prog */ log_buf[0] = '\0'; @@ -180,7 +179,6 @@ static void bpf_prog_load_log_buf(void) ASSERT_GE(fd, 0, "good_fd2"); if (fd >= 0) close(fd); - fd = -1; /* log_level == 0 should fill log_buf for bad prog */ log_buf[0] = '\0'; @@ -191,7 +189,6 @@ static void bpf_prog_load_log_buf(void) ASSERT_LT(fd, 0, "bad_fd"); if (fd >= 0) close(fd); - fd = -1; free(log_buf); } -- 2.17.1

1 year, 3 months

2
1
0 0

[PATCH bpf v1] selftests/bpf: Fix cross-compiling urandom_read

by Tony Ambardar

Linking of urandom_read and liburandom_read.so prefers LLVM's 'ld.lld' but falls back to using 'ld' if unsupported. However, this fallback discards any existing makefile macro for LD and can break cross-compilation. Fix by changing the fallback to use the target linker $(LD), passed via '-fuse-ld=' using an absolute path rather than a linker "flavour". Fixes: 08c79c9cd67f ("selftests/bpf: Don't force lld on non-x86 architectures") Signed-off-by: Tony Ambardar <tony.ambardar(a)gmail.com> --- tools/testing/selftests/bpf/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 5e366f2fc02a..f2a0f912e038 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -263,7 +263,7 @@ $(OUTPUT)/%:%.c ifeq ($(SRCARCH),$(filter $(SRCARCH),x86 riscv)) LLD := lld else -LLD := ld +LLD := $(shell command -v $(LD)) endif # Filter out -static for liburandom_read.so and its dependent targets so that static builds -- 2.34.1

1 year, 3 months

2
1
0 0

[PATCH bpf v1 1/2] bpf: fix unpopulated path_size when uprobe_multi fields unset

by Tyrone Wu

Previously when retrieving `bpf_link_info.uprobe_multi` with `path` and `path_size` fields unset, the `path_size` field is not populated (remains 0). This behavior was inconsistent with how other input/output string buffer fields work, as the field should be populated in cases when: - both buffer and length are set (currently works as expected) - both buffer and length are unset (not working as expected) This patch now fills the `path_size` field when `path` and `path_size` are unset. Fixes: e56fdbfb06e2 ("bpf: Add link_info support for uprobe multi link") Signed-off-by: Tyrone Wu <wudevelops(a)gmail.com> --- kernel/trace/bpf_trace.c | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c index a582cd25ca87..ba34e4f3fa8f 100644 --- a/kernel/trace/bpf_trace.c +++ b/kernel/trace/bpf_trace.c @@ -3133,7 +3133,8 @@ static int bpf_uprobe_multi_link_fill_link_info(const struct bpf_link *link, struct bpf_uprobe_multi_link *umulti_link; u32 ucount = info->uprobe_multi.count; int err = 0, i; - long left; + char *p, *buf; + long left = 0; if (!upath ^ !upath_size) return -EINVAL; @@ -3147,26 +3148,24 @@ static int bpf_uprobe_multi_link_fill_link_info(const struct bpf_link *link, info->uprobe_multi.pid = umulti_link->task ? task_pid_nr_ns(umulti_link->task, task_active_pid_ns(current)) : 0; - if (upath) { - char *p, *buf; - - upath_size = min_t(u32, upath_size, PATH_MAX); + upath_size = upath_size ? min_t(u32, upath_size, PATH_MAX) : PATH_MAX; + buf = kmalloc(upath_size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + p = d_path(&umulti_link->path, buf, upath_size); + if (IS_ERR(p)) { + kfree(buf); + return PTR_ERR(p); + } + upath_size = buf + upath_size - p; - buf = kmalloc(upath_size, GFP_KERNEL); - if (!buf) - return -ENOMEM; - p = d_path(&umulti_link->path, buf, upath_size); - if (IS_ERR(p)) { - kfree(buf); - return PTR_ERR(p); - } - upath_size = buf + upath_size - p; + if (upath) { left = copy_to_user(upath, p, upath_size); - kfree(buf); - if (left) - return -EFAULT; - info->uprobe_multi.path_size = upath_size; } + kfree(buf); + if (left) + return -EFAULT; + info->uprobe_multi.path_size = upath_size; if (!uoffsets && !ucookies && !uref_ctr_offsets) return 0; -- 2.43.0

1 year, 3 months

3
5
0 0

kselftest/fixes kselftest-lib: 2 runs, 1 regressions (linux_kselftest-fixes-6.12-rc2-6-ge26e42b5679ed)

by kernelci.org bot

kselftest/fixes kselftest-lib: 2 runs, 1 regressions (linux_kselftest-fixes-6.12-rc2-6-ge26e42b5679ed) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/fixes/kernel/linux_kselftest… Test: kselftest-lib Tree: kselftest Branch: fixes Describe: linux_kselftest-fixes-6.12-rc2-6-ge26e42b5679ed URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: e26e42b5679edf8c1226970325366f962555e58f Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/670867935b7b683c98c86855 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-12 (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… HTML log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-lib.login: https://kernelci.org/test/case/id/670867935b7b683c98c86856 failing since 1 day (last pass: v6.12-rc1-5-g45a8897db67d4, first fail: linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b)

1 year, 3 months

1
0
0 0

kselftest/fixes kselftest-cpufreq: 3 runs, 2 regressions (linux_kselftest-fixes-6.12-rc2-6-ge26e42b5679ed)

by kernelci.org bot

kselftest/fixes kselftest-cpufreq: 3 runs, 2 regressions (linux_kselftest-fixes-6.12-rc2-6-ge26e42b5679ed) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 sun50i-a64-pine64-plus | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/fixes/kernel/linux_kselftest… Test: kselftest-cpufreq Tree: kselftest Branch: fixes Describe: linux_kselftest-fixes-6.12-rc2-6-ge26e42b5679ed URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: e26e42b5679edf8c1226970325366f962555e58f Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/6708676e7a41ae1109c86861 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-12 (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… HTML log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-cpufreq.login: https://kernelci.org/test/case/id/6708676e7a41ae1109c86862 failing since 1 day (last pass: v6.12-rc1-5-g45a8897db67d4, first fail: linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b) platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ sun50i-a64-pine64-plus | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/67086a1a7942f7bc76c86875 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-12 (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… HTML log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-cpufreq.login: https://kernelci.org/test/case/id/67086a1a7942f7bc76c86876 failing since 1 day (last pass: v6.12-rc1-5-g45a8897db67d4, first fail: linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b)

1 year, 3 months

1
0
0 0

kselftest/fixes kselftest-seccomp: 2 runs, 1 regressions (linux_kselftest-fixes-6.12-rc2-6-ge26e42b5679ed)

by kernelci.org bot

kselftest/fixes kselftest-seccomp: 2 runs, 1 regressions (linux_kselftest-fixes-6.12-rc2-6-ge26e42b5679ed) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/fixes/kernel/linux_kselftest… Test: kselftest-seccomp Tree: kselftest Branch: fixes Describe: linux_kselftest-fixes-6.12-rc2-6-ge26e42b5679ed URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: e26e42b5679edf8c1226970325366f962555e58f Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/670866b6913f5044d0c86896 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-12 (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… HTML log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-seccomp.login: https://kernelci.org/test/case/id/670866b6913f5044d0c86897 failing since 1 day (last pass: v6.12-rc1-5-g45a8897db67d4, first fail: linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b)

1 year, 3 months

1
0
0 0

kselftest/fixes build: 7 builds: 2 failed, 5 passed, 1 warning (linux_kselftest-fixes-6.12-rc2-6-ge26e42b5679ed)

by kernelci.org bot

kselftest/fixes build: 7 builds: 2 failed, 5 passed, 1 warning (linux_kselftest-fixes-6.12-rc2-6-ge26e42b5679ed) Full Build Summary: https://kernelci.org/build/kselftest/branch/fixes/kernel/linux_kselftest-fi… Tree: kselftest Branch: fixes Git Describe: linux_kselftest-fixes-6.12-rc2-6-ge26e42b5679ed Git Commit: e26e42b5679edf8c1226970325366f962555e58f Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures Build Failures Detected: arm64: defconfig+kselftest+arm64-chromebook: (clang-16) FAIL defconfig+kselftest+arm64-chromebook: (gcc-12) FAIL Warnings Detected: arm64: arm: i386: x86_64: x86_64_defconfig+kselftest (clang-16): 1 warning Warnings summary: 1 vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x23: relocation to !ENDBR: .text+0x14fd19 ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-12) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-16) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-16) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x23: relocation to !ENDBR: .text+0x14fd19 --- For more info write to <info(a)kernelci.org>

1 year, 3 months

1
0
0 0

[PATCH v3] ftrace/selftest: Test combination of function_graph tracer and function profiler

by Steven Rostedt

From: Steven Rostedt <rostedt(a)goodmis.org> Masami reported a bug when running function graph tracing then the function profiler. The following commands would cause a kernel crash: # cd /sys/kernel/tracing/ # echo function_graph > current_tracer # echo 1 > function_profile_enabled In that order. Create a test to test this two to make sure this does not come back as a regression. Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devno… Acked-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- Changes since v2: https://lore.kernel.org/20241004145618.18436d7e@gandalf.local.home - Fixed grammar of comment .../ftrace/test.d/ftrace/fgraph-profiler.tc | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/fgraph-profiler.tc diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-profiler.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-profiler.tc new file mode 100644 index 000000000000..ffff8646733c --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-profiler.tc @@ -0,0 +1,31 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: ftrace - function profiler with function graph tracing +# requires: function_profile_enabled set_ftrace_filter function_graph:tracer + +# The function graph tracer can now be run along side of the function +# profiler. But there was a bug that caused the combination of the two +# to crash. It also required the function graph tracer to be started +# first. +# +# This test triggers that bug +# +# We need both function_graph and profiling to run this test + +fail() { # mesg + echo $1 + exit_fail +} + +echo "Enabling function graph tracer:" +echo function_graph > current_tracer +echo "enable profiler" + +# Older kernels do not allow function_profile to be enabled with +# function graph tracer. If the below fails, mark it as unsupported +echo 1 > function_profile_enabled || exit_unsupported + +# Let it run for a bit to make sure nothing explodes +sleep 1 + +exit 0 -- 2.45.2

1 year, 3 months

2
1
0 0

[PATCH net-next v20 01/14] mm: page_frag: add a test module for page_frag

by Yunsheng Lin

The testing is done by ensuring that the fragment allocated from a frag_frag_cache instance is pushed into a ptr_ring instance in a kthread binded to a specified cpu, and a kthread binded to a specified cpu will pop the fragment from the ptr_ring and free the fragment. CC: Alexander Duyck <alexander.duyck(a)gmail.com> Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck(a)fb.com> --- tools/testing/selftests/mm/Makefile | 3 + tools/testing/selftests/mm/page_frag/Makefile | 18 ++ .../selftests/mm/page_frag/page_frag_test.c | 173 ++++++++++++++++++ tools/testing/selftests/mm/run_vmtests.sh | 8 + tools/testing/selftests/mm/test_page_frag.sh | 171 +++++++++++++++++ 5 files changed, 373 insertions(+) create mode 100644 tools/testing/selftests/mm/page_frag/Makefile create mode 100644 tools/testing/selftests/mm/page_frag/page_frag_test.c create mode 100755 tools/testing/selftests/mm/test_page_frag.sh diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index 02e1204971b0..acec529baaca 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -36,6 +36,8 @@ MAKEFLAGS += --no-builtin-rules CFLAGS = -Wall -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES) $(TOOLS_INCLUDES) LDLIBS = -lrt -lpthread -lm +TEST_GEN_MODS_DIR := page_frag + TEST_GEN_FILES = cow TEST_GEN_FILES += compaction_test TEST_GEN_FILES += gup_longterm @@ -126,6 +128,7 @@ TEST_FILES += test_hmm.sh TEST_FILES += va_high_addr_switch.sh TEST_FILES += charge_reserved_hugetlb.sh TEST_FILES += hugetlb_reparenting_test.sh +TEST_FILES += test_page_frag.sh # required by charge_reserved_hugetlb.sh TEST_FILES += write_hugetlb_memory.sh diff --git a/tools/testing/selftests/mm/page_frag/Makefile b/tools/testing/selftests/mm/page_frag/Makefile new file mode 100644 index 000000000000..58dda74d50a3 --- /dev/null +++ b/tools/testing/selftests/mm/page_frag/Makefile @@ -0,0 +1,18 @@ +PAGE_FRAG_TEST_DIR := $(realpath $(dir $(abspath $(lastword $(MAKEFILE_LIST))))) +KDIR ?= $(abspath $(PAGE_FRAG_TEST_DIR)/../../../../..) + +ifeq ($(V),1) +Q = +else +Q = @ +endif + +MODULES = page_frag_test.ko + +obj-m += page_frag_test.o + +all: + +$(Q)make -C $(KDIR) M=$(PAGE_FRAG_TEST_DIR) modules + +clean: + +$(Q)make -C $(KDIR) M=$(PAGE_FRAG_TEST_DIR) clean diff --git a/tools/testing/selftests/mm/page_frag/page_frag_test.c b/tools/testing/selftests/mm/page_frag/page_frag_test.c new file mode 100644 index 000000000000..eeb2b6bc681a --- /dev/null +++ b/tools/testing/selftests/mm/page_frag/page_frag_test.c @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Test module for page_frag cache + * + * Copyright (C) 2024 Yunsheng Lin <linyunsheng(a)huawei.com> + */ + +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/cpumask.h> +#include <linux/completion.h> +#include <linux/ptr_ring.h> +#include <linux/kthread.h> + +static struct ptr_ring ptr_ring; +static int nr_objs = 512; +static atomic_t nthreads; +static struct completion wait; +static struct page_frag_cache test_nc; +static int test_popped; +static int test_pushed; + +static int nr_test = 2000000; +module_param(nr_test, int, 0); +MODULE_PARM_DESC(nr_test, "number of iterations to test"); + +static bool test_align; +module_param(test_align, bool, 0); +MODULE_PARM_DESC(test_align, "use align API for testing"); + +static int test_alloc_len = 2048; +module_param(test_alloc_len, int, 0); +MODULE_PARM_DESC(test_alloc_len, "alloc len for testing"); + +static int test_push_cpu; +module_param(test_push_cpu, int, 0); +MODULE_PARM_DESC(test_push_cpu, "test cpu for pushing fragment"); + +static int test_pop_cpu; +module_param(test_pop_cpu, int, 0); +MODULE_PARM_DESC(test_pop_cpu, "test cpu for popping fragment"); + +static int page_frag_pop_thread(void *arg) +{ + struct ptr_ring *ring = arg; + + pr_info("page_frag pop test thread begins on cpu %d\n", + smp_processor_id()); + + while (test_popped < nr_test) { + void *obj = __ptr_ring_consume(ring); + + if (obj) { + test_popped++; + page_frag_free(obj); + } else { + cond_resched(); + } + } + + if (atomic_dec_and_test(&nthreads)) + complete(&wait); + + pr_info("page_frag pop test thread exits on cpu %d\n", + smp_processor_id()); + + return 0; +} + +static int page_frag_push_thread(void *arg) +{ + struct ptr_ring *ring = arg; + + pr_info("page_frag push test thread begins on cpu %d\n", + smp_processor_id()); + + while (test_pushed < nr_test) { + void *va; + int ret; + + if (test_align) { + va = page_frag_alloc_align(&test_nc, test_alloc_len, + GFP_KERNEL, SMP_CACHE_BYTES); + + WARN_ONCE((unsigned long)va & (SMP_CACHE_BYTES - 1), + "unaligned va returned\n"); + } else { + va = page_frag_alloc(&test_nc, test_alloc_len, GFP_KERNEL); + } + + if (!va) + continue; + + ret = __ptr_ring_produce(ring, va); + if (ret) { + page_frag_free(va); + cond_resched(); + } else { + test_pushed++; + } + } + + pr_info("page_frag push test thread exits on cpu %d\n", + smp_processor_id()); + + if (atomic_dec_and_test(&nthreads)) + complete(&wait); + + return 0; +} + +static int __init page_frag_test_init(void) +{ + struct task_struct *tsk_push, *tsk_pop; + ktime_t start; + u64 duration; + int ret; + + test_nc.va = NULL; + atomic_set(&nthreads, 2); + init_completion(&wait); + + if (test_alloc_len > PAGE_SIZE || test_alloc_len <= 0 || + !cpu_active(test_push_cpu) || !cpu_active(test_pop_cpu)) + return -EINVAL; + + ret = ptr_ring_init(&ptr_ring, nr_objs, GFP_KERNEL); + if (ret) + return ret; + + tsk_push = kthread_create_on_cpu(page_frag_push_thread, &ptr_ring, + test_push_cpu, "page_frag_push"); + if (IS_ERR(tsk_push)) + return PTR_ERR(tsk_push); + + tsk_pop = kthread_create_on_cpu(page_frag_pop_thread, &ptr_ring, + test_pop_cpu, "page_frag_pop"); + if (IS_ERR(tsk_pop)) { + kthread_stop(tsk_push); + return PTR_ERR(tsk_pop); + } + + start = ktime_get(); + wake_up_process(tsk_push); + wake_up_process(tsk_pop); + + pr_info("waiting for test to complete\n"); + + while (!wait_for_completion_timeout(&wait, msecs_to_jiffies(10000))) + pr_info("page_frag_test progress: pushed = %d, popped = %d\n", + test_pushed, test_popped); + + duration = (u64)ktime_us_delta(ktime_get(), start); + pr_info("%d of iterations for %s testing took: %lluus\n", nr_test, + test_align ? "aligned" : "non-aligned", duration); + + ptr_ring_cleanup(&ptr_ring, NULL); + page_frag_cache_drain(&test_nc); + + return -EAGAIN; +} + +static void __exit page_frag_test_exit(void) +{ +} + +module_init(page_frag_test_init); +module_exit(page_frag_test_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Yunsheng Lin <linyunsheng(a)huawei.com>"); +MODULE_DESCRIPTION("Test module for page_frag"); diff --git a/tools/testing/selftests/mm/run_vmtests.sh b/tools/testing/selftests/mm/run_vmtests.sh index c5797ad1d37b..2c5394584af4 100755 --- a/tools/testing/selftests/mm/run_vmtests.sh +++ b/tools/testing/selftests/mm/run_vmtests.sh @@ -75,6 +75,8 @@ separated by spaces: read-only VMAs - mdwe test prctl(PR_SET_MDWE, ...) +- page_frag + test handling of page fragment allocation and freeing example: ./run_vmtests.sh -t "hmm mmap ksm" EOF @@ -456,6 +458,12 @@ CATEGORY="mkdirty" run_test ./mkdirty CATEGORY="mdwe" run_test ./mdwe_test +CATEGORY="page_frag" run_test ./test_page_frag.sh smoke + +CATEGORY="page_frag" run_test ./test_page_frag.sh aligned + +CATEGORY="page_frag" run_test ./test_page_frag.sh nonaligned + echo "SUMMARY: PASS=${count_pass} SKIP=${count_skip} FAIL=${count_fail}" | tap_prefix echo "1..${count_total}" | tap_output diff --git a/tools/testing/selftests/mm/test_page_frag.sh b/tools/testing/selftests/mm/test_page_frag.sh new file mode 100755 index 000000000000..d750d910c899 --- /dev/null +++ b/tools/testing/selftests/mm/test_page_frag.sh @@ -0,0 +1,171 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2024 Yunsheng Lin <linyunsheng(a)huawei.com> +# Copyright (C) 2018 Uladzislau Rezki (Sony) <urezki(a)gmail.com> +# +# This is a test script for the kernel test driver to test the +# correctness and performance of page_frag's implementation. +# Therefore it is just a kernel module loader. You can specify +# and pass different parameters in order to: +# a) analyse performance of page fragment allocations; +# b) stressing and stability check of page_frag subsystem. + +DRIVER="./page_frag/page_frag_test.ko" +CPU_LIST=$(grep -m 2 processor /proc/cpuinfo | cut -d ' ' -f 2) +TEST_CPU_0=$(echo $CPU_LIST | awk '{print $1}') + +if [ $(echo $CPU_LIST | wc -w) -gt 1 ]; then + TEST_CPU_1=$(echo $CPU_LIST | awk '{print $2}') + NR_TEST=100000000 +else + TEST_CPU_1=$TEST_CPU_0 + NR_TEST=1000000 +fi + +# 1 if fails +exitcode=1 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +# +# Static templates for testing of page_frag APIs. +# Also it is possible to pass any supported parameters manually. +# +SMOKE_PARAM="test_push_cpu=$TEST_CPU_0 test_pop_cpu=$TEST_CPU_1" +NONALIGNED_PARAM="$SMOKE_PARAM test_alloc_len=75 nr_test=$NR_TEST" +ALIGNED_PARAM="$NONALIGNED_PARAM test_align=1" + +check_test_requirements() +{ + uid=$(id -u) + if [ $uid -ne 0 ]; then + echo "$0: Must be run as root" + exit $ksft_skip + fi + + if ! which insmod > /dev/null 2>&1; then + echo "$0: You need insmod installed" + exit $ksft_skip + fi + + if [ ! -f $DRIVER ]; then + echo "$0: You need to compile page_frag_test module" + exit $ksft_skip + fi +} + +run_nonaligned_check() +{ + echo "Run performance tests to evaluate how fast nonaligned alloc API is." + + insmod $DRIVER $NONALIGNED_PARAM > /dev/null 2>&1 + echo "Done." + echo "Check the kernel ring buffer to see the summary." +} + +run_aligned_check() +{ + echo "Run performance tests to evaluate how fast aligned alloc API is." + + insmod $DRIVER $ALIGNED_PARAM > /dev/null 2>&1 + echo "Done." + echo "Check the kernel ring buffer to see the summary." +} + +run_smoke_check() +{ + echo "Run smoke test." + + insmod $DRIVER $SMOKE_PARAM > /dev/null 2>&1 + echo "Done." + echo "Check the kernel ring buffer to see the summary." +} + +usage() +{ + echo -n "Usage: $0 [ aligned ] | [ nonaligned ] | | [ smoke ] | " + echo "manual parameters" + echo + echo "Valid tests and parameters:" + echo + modinfo $DRIVER + echo + echo "Example usage:" + echo + echo "# Shows help message" + echo "$0" + echo + echo "# Smoke testing" + echo "$0 smoke" + echo + echo "# Performance testing for nonaligned alloc API" + echo "$0 nonaligned" + echo + echo "# Performance testing for aligned alloc API" + echo "$0 aligned" + echo + exit 0 +} + +function validate_passed_args() +{ + VALID_ARGS=`modinfo $DRIVER | awk '/parm:/ {print $2}' | sed 's/:.*//'` + + # + # Something has been passed, check it. + # + for passed_arg in $@; do + key=${passed_arg//=*/} + valid=0 + + for valid_arg in $VALID_ARGS; do + if [[ $key = $valid_arg ]]; then + valid=1 + break + fi + done + + if [[ $valid -ne 1 ]]; then + echo "Error: key is not correct: ${key}" + exit $exitcode + fi + done +} + +function run_manual_check() +{ + # + # Validate passed parameters. If there is wrong one, + # the script exists and does not execute further. + # + validate_passed_args $@ + + echo "Run the test with following parameters: $@" + insmod $DRIVER $@ > /dev/null 2>&1 + echo "Done." + echo "Check the kernel ring buffer to see the summary." +} + +function run_test() +{ + if [ $# -eq 0 ]; then + usage + else + if [[ "$1" = "smoke" ]]; then + run_smoke_check + elif [[ "$1" = "nonaligned" ]]; then + run_nonaligned_check + elif [[ "$1" = "aligned" ]]; then + run_aligned_check + else + run_manual_check $@ + fi + fi +} + +check_test_requirements +run_test $@ + +exit 0 -- 2.33.0

1 year, 3 months

2
3
0 0

[PATCH v2] ftrace/selftest: Test combination of function_graph tracer and function profiler

by Steven Rostedt

From: Steven Rostedt <rostedt(a)goodmis.org> Masami reported a bug when running function graph tracing then the function profiler. The following commands would cause a kernel crash: # cd /sys/kernel/tracing/ # echo function_graph > current_tracer # echo 1 > function_profile_enabled In that order. Create a test to test this two to make sure this does not come back as a regression. Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devno… Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- Changes since v1: https://lore.kernel.org/20240821150903.05c6cf96@gandalf.local.home - Added comment to why we are doing a sleep 1 - Now that the fix is in mainline, we can add this to the selftests .../ftrace/test.d/ftrace/fgraph-profiler.tc | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/fgraph-profiler.tc diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-profiler.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-profiler.tc new file mode 100644 index 000000000000..1580e4ef9739 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-profiler.tc @@ -0,0 +1,31 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: ftrace - function profiler with function graph tracing +# requires: function_profile_enabled set_ftrace_filter function_graph:tracer + +# The function graph tracer can now be run along side of the function +# profiler. But there was a bug that caused the combination of the two +# to crash. It also required the function graph tracer to be started +# first. +# +# This test triggers that bug +# +# We need function_graph and profiling to to run this test + +fail() { # mesg + echo $1 + exit_fail +} + +echo "Enabling function graph tracer:" +echo function_graph > current_tracer +echo "enable profiler" + +# Older kernels do not allow function_profile to be enabled with +# function graph tracer. If the below fails, mark it as unsupported +echo 1 > function_profile_enabled || exit_unsupported + +# Let it run for a bit to make sure nothing explodes +sleep 1 + +exit 0 -- 2.45.2

1 year, 3 months

3
4
0 0

[PATCH] selftests: net: rds: fix module not found

by Alessandro Zanni

This fix solves this error, when calling kselftest with targets "net/rds": selftests: net/rds: test.py Traceback (most recent call last): File "tools/testing/selftests/net/rds/./test.py", line 17, in <module> from lib.py import ip ModuleNotFoundError: No module named 'lib' Signed-off-by: Alessandro Zanni <alessandro.zanni87(a)gmail.com> --- tools/testing/selftests/net/rds/test.py | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/rds/test.py b/tools/testing/selftests/net/rds/test.py index e6bb109bcead..112a8059c030 100755 --- a/tools/testing/selftests/net/rds/test.py +++ b/tools/testing/selftests/net/rds/test.py @@ -14,8 +14,9 @@ import sys import atexit from pwd import getpwuid from os import stat -from lib.py import ip +sys.path.append("..") +from lib.py.utils import ip libc = ctypes.cdll.LoadLibrary('libc.so.6') setns = libc.setns -- 2.43.0

1 year, 3 months

2
2
0 0

[PATCH] selftests/bpf: Removed redundant variable

by Zhu Jun

The error check is no longer needed for this test case, simplifying the code. Signed-off-by: Zhu Jun <zhujun2(a)cmss.chinamobile.com> --- tools/testing/selftests/bpf/prog_tests/signal_pending.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/signal_pending.c b/tools/testing/selftests/bpf/prog_tests/signal_pending.c index 70b49da5ca0a..8920fadb3aa9 100644 --- a/tools/testing/selftests/bpf/prog_tests/signal_pending.c +++ b/tools/testing/selftests/bpf/prog_tests/signal_pending.c @@ -36,7 +36,7 @@ static void test_signal_pending_by_type(enum bpf_prog_type prog_type) err = setitimer(ITIMER_REAL, &timeo, NULL); ASSERT_OK(err, "test-run-signal-timer"); - err = bpf_prog_test_run_opts(prog_fd, &topts); + bpf_prog_test_run_opts(prog_fd, &topts); ASSERT_LE(topts.duration, 500000000 /* 500ms */, "test-run-signal-duration"); -- 2.17.1

1 year, 3 months

2
1
0 0

[PATCH] selftests: drivers: net: fix name not defined

by Alessandro Zanni

This fix solves this error, when calling kselftest with targets "drivers/net": File "tools/testing/selftests/net/lib/py/nsim.py", line 64, in __init__ if e.errno == errno.ENOSPC: NameError: name 'errno' is not defined The module errno makes available standard error system symbols. Signed-off-by: Alessandro Zanni <alessandro.zanni87(a)gmail.com> --- tools/testing/selftests/net/lib/py/nsim.py | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/net/lib/py/nsim.py b/tools/testing/selftests/net/lib/py/nsim.py index f571a8b3139b..1a8cbe9acc48 100644 --- a/tools/testing/selftests/net/lib/py/nsim.py +++ b/tools/testing/selftests/net/lib/py/nsim.py @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 +import errno import json import os import random -- 2.43.0

1 year, 3 months

3
3
0 0

[PATCH net-next v03 0/3] net: af_packet: allow joining a fanout when link is down

by Gur Stavi

PACKET socket can retain its fanout membership through link down and up and leave a fanout while closed regardless of link state. However, socket was forbidden from joining a fanout while it was not RUNNING. This scenario was identified while studying DPDK pmd_af_packet_drv. Since sockets are only created during initialization, there is no reason to fail the initialization if a single link is temporarily down. This patch allows PACKET socket to join a fanout while not RUNNING. Selftest psock_fanout is extended to test this "fanout while link down" scenario. Selftest psock_fanout is also extended to test fanout create/join by socket that did not bind or specified a protocol, which carries an implicit bind. This is the only test that was performed. Changes: V03: * psock_fanout: add test for joining fanout with unbound socket. * Test that socket can receive packets before adding it to a fanout match. This is kind of replaces the RUNNING test that was removed. * Initialize po->ifindex in packet_create. To -1 if no protocol is specified and add an explicit initialization to 0 if protocol is specified. * Refactor relevant code in fanout_add within bind_lock, as a sequence of if {} else if {}, in order to reduce indentation of nested if statements and provide specific error codes. V02: https://lore.kernel.org/netdev/cover.1728382839.git.gur.stavi@huawei.com * psock_fanout: use explicit loopback up/down instead of toggle. * psock_fanout: don't try to restore loopback state on failure. * Rephrase commit message about "leaving a fanout". V01: https://lore.kernel.org/netdev/cover.1728303615.git.gur.stavi@huawei.com/ Gur Stavi (3): af_packet: allow fanout_add when socket is not RUNNING selftests: net/psock_fanout: socket joins fanout when link is down selftests: net/psock_fanout: unbound socket fanout net/packet/af_packet.c | 35 ++++++---- tools/testing/selftests/net/psock_fanout.c | 78 +++++++++++++++++++++- 2 files changed, 96 insertions(+), 17 deletions(-) base-commit: 36efaca9cb28a893cad98f0448c39a8b698859e2 -- 2.45.2

1 year, 3 months

2
6
0 0

[PATCH bpf v1] selftests/bpf: Fix error compiling cgroup_ancestor.c with musl libc

by Tony Ambardar

Existing code calls connect() with a 'struct sockaddr_in6 *' argument where a 'struct sockaddr *' argument is declared, yielding compile errors when building for mips64el/musl-libc: In file included from cgroup_ancestor.c:3: cgroup_ancestor.c: In function 'send_datagram': cgroup_ancestor.c:38:38: error: passing argument 2 of 'connect' from incompatible pointer type [-Werror=incompatible-pointer-types] 38 | if (!ASSERT_OK(connect(sock, &addr, sizeof(addr)), "connect")) { | ^~~~~ | | | struct sockaddr_in6 * ./test_progs.h:343:29: note: in definition of macro 'ASSERT_OK' 343 | long long ___res = (res); \ | ^~~ In file included from .../netinet/in.h:10, from .../arpa/inet.h:9, from ./test_progs.h:17: .../sys/socket.h:386:19: note: expected 'const struct sockaddr *' but argument is of type 'struct sockaddr_in6 *' 386 | int connect (int, const struct sockaddr *, socklen_t); | ^~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors This only compiles because of a glibc extension allowing declaration of the argument as a "transparent union" which includes both types above. Explicitly cast the argument to allow compiling for both musl and glibc. Cc: Alexis Lothoré (eBPF Foundation) <alexis.lothore(a)bootlin.com> Fixes: f957c230e173 ("selftests/bpf: convert test_skb_cgroup_id_user to test_progs") Signed-off-by: Tony Ambardar <tony.ambardar(a)gmail.com> --- tools/testing/selftests/bpf/prog_tests/cgroup_ancestor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/cgroup_ancestor.c b/tools/testing/selftests/bpf/prog_tests/cgroup_ancestor.c index 9250a1e9f9af..3f9ffdf71343 100644 --- a/tools/testing/selftests/bpf/prog_tests/cgroup_ancestor.c +++ b/tools/testing/selftests/bpf/prog_tests/cgroup_ancestor.c @@ -35,7 +35,7 @@ static int send_datagram(void) if (!ASSERT_OK_FD(sock, "create socket")) return sock; - if (!ASSERT_OK(connect(sock, &addr, sizeof(addr)), "connect")) { + if (!ASSERT_OK(connect(sock, (struct sockaddr *)&addr, sizeof(addr)), "connect")) { close(sock); return -1; } -- 2.34.1

1 year, 3 months

3
2
0 0

[PATCH bpf] bpf: fix unpopulated name_len field in perf_event link info

by tyrone-wu

Previously when retrieving `bpf_link_info.perf_event` for kprobe/uprobe/tracepoint, the `name_len` field was not populated by the kernel, leaving it to reflect the value initially set by the user. This behavior was inconsistent with how other input/output string buffer fields function (e.g. `raw_tracepoint.tp_name_len`). This patch fills `name_len` with the actual size of the string name. The relevant selftests have also been updated to assert that `name_len` contains the correct size rather than 0. Link: https://lore.kernel.org/bpf/CABVU1kXwQXhqQGe0RTrr7eegtM6SVW_KayZBy16-yb0Snz… Fixes: 1b715e1b0ec5 ("bpf: Support ->fill_link_info for perf_event") Signed-off-by: tyrone-wu <wudevelops(a)gmail.com> --- kernel/bpf/syscall.c | 25 +++++++++++++------ .../selftests/bpf/prog_tests/fill_link_info.c | 6 ++--- 2 files changed, 20 insertions(+), 11 deletions(-) diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index a8f1808a1ca5..90b6add4d0c9 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -3565,7 +3565,7 @@ static void bpf_perf_link_dealloc(struct bpf_link *link) } static int bpf_perf_link_fill_common(const struct perf_event *event, - char __user *uname, u32 ulen, + char __user *uname, u32 *ulen, u64 *probe_offset, u64 *probe_addr, u32 *fd_type, unsigned long *missed) { @@ -3574,18 +3574,20 @@ static int bpf_perf_link_fill_common(const struct perf_event *event, size_t len; int err; - if (!ulen ^ !uname) + if (!(*ulen) ^ !uname) return -EINVAL; err = bpf_get_perf_event_info(event, &prog_id, fd_type, &buf, probe_offset, probe_addr, missed); if (err) return err; + + len = strlen(buf); + *ulen = len + 1; if (!uname) return 0; if (buf) { - len = strlen(buf); - err = bpf_copy_to_user(uname, buf, ulen, len); + err = bpf_copy_to_user(uname, buf, *ulen, len); if (err) return err; } else { @@ -3609,7 +3611,7 @@ static int bpf_perf_link_fill_kprobe(const struct perf_event *event, uname = u64_to_user_ptr(info->perf_event.kprobe.func_name); ulen = info->perf_event.kprobe.name_len; - err = bpf_perf_link_fill_common(event, uname, ulen, &offset, &addr, + err = bpf_perf_link_fill_common(event, uname, &ulen, &offset, &addr, &type, &missed); if (err) return err; @@ -3617,7 +3619,7 @@ static int bpf_perf_link_fill_kprobe(const struct perf_event *event, info->perf_event.type = BPF_PERF_EVENT_KRETPROBE; else info->perf_event.type = BPF_PERF_EVENT_KPROBE; - + info->perf_event.kprobe.name_len = ulen; info->perf_event.kprobe.offset = offset; info->perf_event.kprobe.missed = missed; if (!kallsyms_show_value(current_cred())) @@ -3639,7 +3641,7 @@ static int bpf_perf_link_fill_uprobe(const struct perf_event *event, uname = u64_to_user_ptr(info->perf_event.uprobe.file_name); ulen = info->perf_event.uprobe.name_len; - err = bpf_perf_link_fill_common(event, uname, ulen, &offset, &addr, + err = bpf_perf_link_fill_common(event, uname, &ulen, &offset, &addr, &type, NULL); if (err) return err; @@ -3648,6 +3650,7 @@ static int bpf_perf_link_fill_uprobe(const struct perf_event *event, info->perf_event.type = BPF_PERF_EVENT_URETPROBE; else info->perf_event.type = BPF_PERF_EVENT_UPROBE; + info->perf_event.uprobe.name_len = ulen; info->perf_event.uprobe.offset = offset; info->perf_event.uprobe.cookie = event->bpf_cookie; return 0; @@ -3673,12 +3676,18 @@ static int bpf_perf_link_fill_tracepoint(const struct perf_event *event, { char __user *uname; u32 ulen; + int err; uname = u64_to_user_ptr(info->perf_event.tracepoint.tp_name); ulen = info->perf_event.tracepoint.name_len; + err = bpf_perf_link_fill_common(event, uname, &ulen, NULL, NULL, NULL, NULL); + if (err) + return err; + info->perf_event.type = BPF_PERF_EVENT_TRACEPOINT; + info->perf_event.tracepoint.name_len = ulen; info->perf_event.tracepoint.cookie = event->bpf_cookie; - return bpf_perf_link_fill_common(event, uname, ulen, NULL, NULL, NULL, NULL); + return 0; } static int bpf_perf_link_fill_perf_event(const struct perf_event *event, diff --git a/tools/testing/selftests/bpf/prog_tests/fill_link_info.c b/tools/testing/selftests/bpf/prog_tests/fill_link_info.c index f3932941bbaa..59077f260404 100644 --- a/tools/testing/selftests/bpf/prog_tests/fill_link_info.c +++ b/tools/testing/selftests/bpf/prog_tests/fill_link_info.c @@ -67,8 +67,8 @@ static int verify_perf_link_info(int fd, enum bpf_perf_event_type type, long add ASSERT_EQ(info.perf_event.kprobe.cookie, PERF_EVENT_COOKIE, "kprobe_cookie"); + ASSERT_EQ(info.perf_event.kprobe.name_len, strlen(KPROBE_FUNC) + 1, "name_len"); if (!info.perf_event.kprobe.func_name) { - ASSERT_EQ(info.perf_event.kprobe.name_len, 0, "name_len"); info.perf_event.kprobe.func_name = ptr_to_u64(&buf); info.perf_event.kprobe.name_len = sizeof(buf); goto again; @@ -79,8 +79,8 @@ static int verify_perf_link_info(int fd, enum bpf_perf_event_type type, long add ASSERT_EQ(err, 0, "cmp_kprobe_func_name"); break; case BPF_PERF_EVENT_TRACEPOINT: + ASSERT_EQ(info.perf_event.tracepoint.name_len, strlen(TP_NAME) + 1, "name_len"); if (!info.perf_event.tracepoint.tp_name) { - ASSERT_EQ(info.perf_event.tracepoint.name_len, 0, "name_len"); info.perf_event.tracepoint.tp_name = ptr_to_u64(&buf); info.perf_event.tracepoint.name_len = sizeof(buf); goto again; @@ -96,8 +96,8 @@ static int verify_perf_link_info(int fd, enum bpf_perf_event_type type, long add case BPF_PERF_EVENT_URETPROBE: ASSERT_EQ(info.perf_event.uprobe.offset, offset, "uprobe_offset"); + ASSERT_EQ(info.perf_event.uprobe.name_len, strlen(UPROBE_FILE) + 1, "name_len"); if (!info.perf_event.uprobe.file_name) { - ASSERT_EQ(info.perf_event.uprobe.name_len, 0, "name_len"); info.perf_event.uprobe.file_name = ptr_to_u64(&buf); info.perf_event.uprobe.name_len = sizeof(buf); goto again; -- 2.43.0

1 year, 3 months

6
19
0 0

kselftest/fixes kselftest-cpufreq: 2 runs, 1 regressions (linux_kselftest-fixes-6.12-rc2-5-gdc7da277516a0)

by kernelci.org bot

kselftest/fixes kselftest-cpufreq: 2 runs, 1 regressions (linux_kselftest-fixes-6.12-rc2-5-gdc7da277516a0) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------+-------+-------------+----------+---------------------+------------ sun50i-a64-pine64-plus | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/fixes/kernel/linux_kselftest… Test: kselftest-cpufreq Tree: kselftest Branch: fixes Describe: linux_kselftest-fixes-6.12-rc2-5-gdc7da277516a0 URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: dc7da277516a0f22fcb4ae904c4ce0083ae0b9ff Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------+-------+-------------+----------+---------------------+------------ sun50i-a64-pine64-plus | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/670709178965018b0ac868b0 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-12 (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… HTML log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-cpufreq.login: https://kernelci.org/test/case/id/670709178965018b0ac868b1 failing since 0 day (last pass: v6.12-rc1-5-g45a8897db67d4, first fail: linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b)

1 year, 3 months

1
0
0 0

kselftest/fixes build: 7 builds: 2 failed, 5 passed, 1 warning (linux_kselftest-fixes-6.12-rc2-5-gdc7da277516a0)

by kernelci.org bot

kselftest/fixes build: 7 builds: 2 failed, 5 passed, 1 warning (linux_kselftest-fixes-6.12-rc2-5-gdc7da277516a0) Full Build Summary: https://kernelci.org/build/kselftest/branch/fixes/kernel/linux_kselftest-fi… Tree: kselftest Branch: fixes Git Describe: linux_kselftest-fixes-6.12-rc2-5-gdc7da277516a0 Git Commit: dc7da277516a0f22fcb4ae904c4ce0083ae0b9ff Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures Build Failures Detected: arm64: defconfig+kselftest+arm64-chromebook: (clang-16) FAIL defconfig+kselftest+arm64-chromebook: (gcc-12) FAIL Warnings Detected: arm64: arm: i386: x86_64: x86_64_defconfig+kselftest (clang-16): 1 warning Warnings summary: 1 vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x23: relocation to !ENDBR: .text+0x14fd19 ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-12) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-16) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-16) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x23: relocation to !ENDBR: .text+0x14fd19 --- For more info write to <info(a)kernelci.org>

1 year, 3 months

1
0
0 0

[PATCH 1/1] selftests/rseq: Fix mm_cid test failure

by Mathieu Desnoyers

Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by: glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)") Without this fix, rseq selftests for mm_cid fail: ./run_param_test.sh Default parameters Running test spinlock Running compare-twice test spinlock Running mm_cid test spinlock Error: cpu id getter unavailable [ This is based on the following branch: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git branch: fixes ] Fixes: 18c2355838e7 ("selftests/rseq: Implement rseq mm_cid field support") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Peter Zijlstra <peterz(a)infradead.org> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Shuah Khan <skhan(a)linuxfoundation.org> CC: Carlos O'Donell <carlos(a)redhat.com> CC: Florian Weimer <fweimer(a)redhat.com> CC: linux-kselftest(a)vger.kernel.org CC: stable(a)vger.kernel.org --- tools/testing/selftests/rseq/rseq.c | 110 +++++++++++++++++++--------- tools/testing/selftests/rseq/rseq.h | 10 +-- 2 files changed, 77 insertions(+), 43 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq.c b/tools/testing/selftests/rseq/rseq.c index 96e812bdf8a4..5b9772cdf265 100644 --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -60,12 +60,6 @@ unsigned int rseq_size = -1U; /* Flags used during rseq registration. */ unsigned int rseq_flags; -/* - * rseq feature size supported by the kernel. 0 if the registration was - * unsuccessful. - */ -unsigned int rseq_feature_size = -1U; - static int rseq_ownership; static int rseq_reg_success; /* At least one rseq registration has succeded. */ @@ -111,6 +105,43 @@ int rseq_available(void) } } +/* The rseq areas need to be at least 32 bytes. */ +static +unsigned int get_rseq_min_alloc_size(void) +{ + unsigned int alloc_size = rseq_size; + + if (alloc_size < ORIG_RSEQ_ALLOC_SIZE) + alloc_size = ORIG_RSEQ_ALLOC_SIZE; + return alloc_size; +} + +/* + * Return the feature size supported by the kernel. + * + * Depending on the value returned by getauxval(AT_RSEQ_FEATURE_SIZE): + * + * 0: Return ORIG_RSEQ_FEATURE_SIZE (20) + * > 0: Return the value from getauxval(AT_RSEQ_FEATURE_SIZE). + * + * It should never return a value below ORIG_RSEQ_FEATURE_SIZE. + */ +static +unsigned int get_rseq_kernel_feature_size(void) +{ + unsigned long auxv_rseq_feature_size, auxv_rseq_align; + + auxv_rseq_align = getauxval(AT_RSEQ_ALIGN); + assert(!auxv_rseq_align || auxv_rseq_align <= RSEQ_THREAD_AREA_ALLOC_SIZE); + + auxv_rseq_feature_size = getauxval(AT_RSEQ_FEATURE_SIZE); + assert(!auxv_rseq_feature_size || auxv_rseq_feature_size <= RSEQ_THREAD_AREA_ALLOC_SIZE); + if (auxv_rseq_feature_size) + return auxv_rseq_feature_size; + else + return ORIG_RSEQ_FEATURE_SIZE; +} + int rseq_register_current_thread(void) { int rc; @@ -119,7 +150,7 @@ int rseq_register_current_thread(void) /* Treat libc's ownership as a successful registration. */ return 0; } - rc = sys_rseq(&__rseq_abi, rseq_size, 0, RSEQ_SIG); + rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { if (RSEQ_READ_ONCE(rseq_reg_success)) { /* Incoherent success/failure within process. */ @@ -140,28 +171,12 @@ int rseq_unregister_current_thread(void) /* Treat libc's ownership as a successful unregistration. */ return 0; } - rc = sys_rseq(&__rseq_abi, rseq_size, RSEQ_ABI_FLAG_UNREGISTER, RSEQ_SIG); + rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), RSEQ_ABI_FLAG_UNREGISTER, RSEQ_SIG); if (rc) return -1; return 0; } -static -unsigned int get_rseq_feature_size(void) -{ - unsigned long auxv_rseq_feature_size, auxv_rseq_align; - - auxv_rseq_align = getauxval(AT_RSEQ_ALIGN); - assert(!auxv_rseq_align || auxv_rseq_align <= RSEQ_THREAD_AREA_ALLOC_SIZE); - - auxv_rseq_feature_size = getauxval(AT_RSEQ_FEATURE_SIZE); - assert(!auxv_rseq_feature_size || auxv_rseq_feature_size <= RSEQ_THREAD_AREA_ALLOC_SIZE); - if (auxv_rseq_feature_size) - return auxv_rseq_feature_size; - else - return ORIG_RSEQ_FEATURE_SIZE; -} - static __attribute__((constructor)) void rseq_init(void) { @@ -178,28 +193,54 @@ void rseq_init(void) } if (libc_rseq_size_p && libc_rseq_offset_p && libc_rseq_flags_p && *libc_rseq_size_p != 0) { + unsigned int libc_rseq_size; + /* rseq registration owned by glibc */ rseq_offset = *libc_rseq_offset_p; - rseq_size = *libc_rseq_size_p; + libc_rseq_size = *libc_rseq_size_p; rseq_flags = *libc_rseq_flags_p; - rseq_feature_size = get_rseq_feature_size(); - if (rseq_feature_size > rseq_size) - rseq_feature_size = rseq_size; + + /* + * Previous versions of glibc expose the value + * 32 even though the kernel only supported 20 + * bytes initially. Therefore treat 32 as a + * special-case. glibc 2.40 exposes a 20 bytes + * __rseq_size without using getauxval(3) to + * query the supported size, while still allocating a 32 + * bytes area. Also treat 20 as a special-case. + * + * Special-cases are handled by using the following + * value as active feature set size: + * + * rseq_size = min(32, get_rseq_kernel_feature_size()) + */ + switch (libc_rseq_size) { + case ORIG_RSEQ_FEATURE_SIZE: + fallthrough; + case ORIG_RSEQ_ALLOC_SIZE: + { + unsigned int rseq_kernel_feature_size = get_rseq_kernel_feature_size(); + + if (rseq_kernel_feature_size < ORIG_RSEQ_ALLOC_SIZE) + rseq_size = rseq_kernel_feature_size; + else + rseq_size = ORIG_RSEQ_ALLOC_SIZE; + break; + } + default: + /* Otherwise just use the __rseq_size from libc as rseq_size. */ + rseq_size = libc_rseq_size; + break; + } return; } rseq_ownership = 1; if (!rseq_available()) { rseq_size = 0; - rseq_feature_size = 0; return; } rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); rseq_flags = 0; - rseq_feature_size = get_rseq_feature_size(); - if (rseq_feature_size == ORIG_RSEQ_FEATURE_SIZE) - rseq_size = ORIG_RSEQ_ALLOC_SIZE; - else - rseq_size = RSEQ_THREAD_AREA_ALLOC_SIZE; } static __attribute__((destructor)) @@ -209,7 +250,6 @@ void rseq_exit(void) return; rseq_offset = 0; rseq_size = -1U; - rseq_feature_size = -1U; rseq_ownership = 0; } diff --git a/tools/testing/selftests/rseq/rseq.h b/tools/testing/selftests/rseq/rseq.h index d7364ea4d201..4e217b620e0c 100644 --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -68,12 +68,6 @@ extern unsigned int rseq_size; /* Flags used during rseq registration. */ extern unsigned int rseq_flags; -/* - * rseq feature size supported by the kernel. 0 if the registration was - * unsuccessful. - */ -extern unsigned int rseq_feature_size; - enum rseq_mo { RSEQ_MO_RELAXED = 0, RSEQ_MO_CONSUME = 1, /* Unused */ @@ -193,7 +187,7 @@ static inline uint32_t rseq_current_cpu(void) static inline bool rseq_node_id_available(void) { - return (int) rseq_feature_size >= rseq_offsetofend(struct rseq_abi, node_id); + return (int) rseq_size >= rseq_offsetofend(struct rseq_abi, node_id); } /* @@ -207,7 +201,7 @@ static inline uint32_t rseq_current_node_id(void) static inline bool rseq_mm_cid_available(void) { - return (int) rseq_feature_size >= rseq_offsetofend(struct rseq_abi, mm_cid); + return (int) rseq_size >= rseq_offsetofend(struct rseq_abi, mm_cid); } static inline uint32_t rseq_current_mm_cid(void) -- 2.39.2

1 year, 3 months

2
1
0 0

[PATCH v8 0/8] clk: Add kunit tests for fixed rate and parent data

by Stephen Boyd

This patch series adds unit tests for the clk fixed rate basic type and the clk registration functions that use struct clk_parent_data. To get there, we add support for loading device tree overlays onto the live DTB along with probing platform drivers to bind to device nodes in the overlays. With this series, we're able to exercise some of the code in the common clk framework that uses devicetree lookups to find parents and the fixed rate clk code that scans device tree directly and creates clks. Please review. I Cced everyone to all the patches so they get the full context. I'm hoping I can take the whole pile through the clk tree as they all build upon each other. Or the DT part can be merged through the DT tree to reduce the dependencies. Changes from v7: https://lore.kernel.org/r/20240710201246.1802189-1-sboyd@kernel.org * Support modular builds properly by compiling overlay with tests into one .ko * Fold in thinko fix from Geert to DT overlay application patch * Export device_is_bound() to fix module build * Add more module license and description Changes from v6: https://lore.kernel.org/r/20240706045454.215701-1-sboyd@kernel.org * Fix kasan error in platform test by fixing the condition to check for correct free callback * Add module descriptions to new modules Changes from v5: https://lore.kernel.org/r/20240603223811.3815762-1-sboyd@kernel.org * Pick up reviewed-by tags * Drop test vendor prefix bindings as dtschema allows anything now * Use of_node_put_kunit() more to plug some reference leaks * Select DTC config to avoid compile fails because of missing dtc * Don't skip for OF_OVERLAY in overlay tests because they depend on it Changes from v4: https://lore.kernel.org/r/20240422232404.213174-1-sboyd@kernel.org * Picked up reviewed-by tags * Check for non-NULL device pointers before calling put_device() * Fix CFI issues with kunit actions * Introduce platform_device_prepare_wait_for_probe() helper to wait for a platform device to probe * Move platform code to lib/kunit and rename functions to have kunit prefix * Fix issue with platform wrappers messing up reference counting because they used kunit actions * New patch to populate overlay devices on root node for powerpc * Make fixed-rate binding generic single clk consumer binding Changes from v3: https://lore.kernel.org/r/20230327222159.3509818-1-sboyd@kernel.org * No longer depend on Frank's series[1] because it was merged upstream[2] * Use kunit_add_action_or_reset() to shorten code * Skip tests properly when CONFIG_OF_OVERLAY isn't set Changes from v2: https://lore.kernel.org/r/20230315183729.2376178-1-sboyd@kernel.org * Overlays don't depend on __symbols__ node * Depend on Frank's always create root node if CONFIG_OF series[1] * Added kernel-doc to KUnit API doc * Fixed some kernel-doc on functions * More test cases for fixed rate clk Changes from v1: https://lore.kernel.org/r/20230302013822.1808711-1-sboyd@kernel.org * Don't depend on UML, use unittest data approach to attach nodes * Introduce overlay loading API for KUnit * Move platform_device KUnit code to drivers/base/test * Use #define macros for constants shared between unit tests and overlays * Settle on "test" as a vendor prefix * Make KUnit wrappers have "_kunit" postfix [1] https://lore.kernel.org/r/20230317053415.2254616-1-frowand.list@gmail.com [2] https://lore.kernel.org/r/20240308195737.GA1174908-robh@kernel.org Stephen Boyd (8): of/platform: Allow overlays to create platform devices from the root node of: Add test managed wrappers for of_overlay_apply()/of_node_put() dt-bindings: vendor-prefixes: Add "test" vendor for KUnit and friends of: Add a KUnit test for overlays and test managed APIs platform: Add test managed platform_device/driver APIs clk: Add test managed clk provider/consumer APIs clk: Add KUnit tests for clk fixed rate basic type clk: Add KUnit tests for clks registered with struct clk_parent_data Documentation/dev-tools/kunit/api/clk.rst | 10 + Documentation/dev-tools/kunit/api/index.rst | 21 + Documentation/dev-tools/kunit/api/of.rst | 13 + .../dev-tools/kunit/api/platformdevice.rst | 10 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/base/dd.c | 1 + drivers/clk/.kunitconfig | 2 + drivers/clk/Kconfig | 11 + drivers/clk/Makefile | 11 +- drivers/clk/clk-fixed-rate_test.c | 380 +++++++++++++++ drivers/clk/clk-fixed-rate_test.h | 8 + drivers/clk/clk_kunit_helpers.c | 207 ++++++++ drivers/clk/clk_parent_data_test.h | 10 + drivers/clk/clk_test.c | 453 +++++++++++++++++- drivers/clk/kunit_clk_fixed_rate_test.dtso | 19 + drivers/clk/kunit_clk_parent_data_test.dtso | 28 ++ drivers/of/.kunitconfig | 1 + drivers/of/Kconfig | 10 + drivers/of/Makefile | 3 + drivers/of/kunit_overlay_test.dtso | 9 + drivers/of/of_kunit_helpers.c | 77 +++ drivers/of/overlay_test.c | 115 +++++ drivers/of/platform.c | 9 +- include/kunit/clk.h | 28 ++ include/kunit/of.h | 115 +++++ include/kunit/platform_device.h | 20 + lib/kunit/Makefile | 4 +- lib/kunit/platform-test.c | 224 +++++++++ lib/kunit/platform.c | 302 ++++++++++++ 29 files changed, 2097 insertions(+), 6 deletions(-) create mode 100644 Documentation/dev-tools/kunit/api/clk.rst create mode 100644 Documentation/dev-tools/kunit/api/of.rst create mode 100644 Documentation/dev-tools/kunit/api/platformdevice.rst create mode 100644 drivers/clk/clk-fixed-rate_test.c create mode 100644 drivers/clk/clk-fixed-rate_test.h create mode 100644 drivers/clk/clk_kunit_helpers.c create mode 100644 drivers/clk/clk_parent_data_test.h create mode 100644 drivers/clk/kunit_clk_fixed_rate_test.dtso create mode 100644 drivers/clk/kunit_clk_parent_data_test.dtso create mode 100644 drivers/of/kunit_overlay_test.dtso create mode 100644 drivers/of/of_kunit_helpers.c create mode 100644 drivers/of/overlay_test.c create mode 100644 include/kunit/clk.h create mode 100644 include/kunit/of.h create mode 100644 include/kunit/platform_device.h create mode 100644 lib/kunit/platform-test.c create mode 100644 lib/kunit/platform.c base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0 -- https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/ https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git

1 year, 3 months

3
33
0 0

[PATCH v3] selftests: sched_ext: Add sched_ext as proper selftest target

by Björn Töpel

From: Björn Töpel <bjorn(a)rivosinc.com> The sched_ext selftests is missing proper cross-compilation support, a proper target entry, and out-of-tree build support. When building the kselftest suite, e.g.: make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \ TARGETS=sched_ext SKIP_TARGETS="" O=/output/foo \ -C tools/testing/selftests install or: make ARCH=arm64 LLVM=1 TARGETS=sched_ext SKIP_TARGETS="" \ O=/output/foo -C tools/testing/selftests install The expectation is that the sched_ext is included, cross-built, the correct toolchain is picked up, and placed into /output/foo. In contrast to the BPF selftests, the sched_ext suite does not use bpftool at test run-time, so it is sufficient to build bpftool for the build host only. Add ARCH, CROSS_COMPILE, OUTPUT, and TARGETS support to the sched_ext selftest. Also, remove some variables that were unused by the Makefile. Signed-off-by: Björn Töpel <bjorn(a)rivosinc.com> --- v3: * Always build a build host version of bpftool (Mark) * Make sure LLVM style "ARCH only" cross-build works (Mark) v2: * Removed the duplicated LLVM prefix parsing (David) * Made sure make clean didn't do a complete mess (David) * Added sched_ext to default skip (Shuah) --- tools/testing/selftests/Makefile | 9 +-- tools/testing/selftests/sched_ext/Makefile | 73 ++++++++++------------ 2 files changed, 38 insertions(+), 44 deletions(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index b38199965f99..363d031a16f7 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -88,6 +88,7 @@ TARGETS += rlimits TARGETS += rseq TARGETS += rtc TARGETS += rust +TARGETS += sched_ext TARGETS += seccomp TARGETS += sgx TARGETS += sigaltstack @@ -129,10 +130,10 @@ ifeq ($(filter net/lib,$(TARGETS)),) endif endif -# User can optionally provide a TARGETS skiplist. By default we skip -# BPF since it has cutting edge build time dependencies which require -# more effort to install. -SKIP_TARGETS ?= bpf +# User can optionally provide a TARGETS skiplist. By default we skip +# targets using BPF since it has cutting edge build time dependencies +# which require more effort to install. +SKIP_TARGETS ?= bpf sched_ext ifneq ($(SKIP_TARGETS),) TMP := $(filter-out $(SKIP_TARGETS), $(TARGETS)) override TARGETS := $(TMP) diff --git a/tools/testing/selftests/sched_ext/Makefile b/tools/testing/selftests/sched_ext/Makefile index 0754a2c110a1..06ae9c107049 100644 --- a/tools/testing/selftests/sched_ext/Makefile +++ b/tools/testing/selftests/sched_ext/Makefile @@ -3,24 +3,13 @@ include ../../../build/Build.include include ../../../scripts/Makefile.arch include ../../../scripts/Makefile.include + +TEST_GEN_PROGS := runner + +# override lib.mk's default rules +OVERRIDE_TARGETS := 1 include ../lib.mk -ifneq ($(LLVM),) -ifneq ($(filter %/,$(LLVM)),) -LLVM_PREFIX := $(LLVM) -else ifneq ($(filter -%,$(LLVM)),) -LLVM_SUFFIX := $(LLVM) -endif - -CC := $(LLVM_PREFIX)clang$(LLVM_SUFFIX) $(CLANG_FLAGS) -fintegrated-as -else -CC := gcc -endif # LLVM - -ifneq ($(CROSS_COMPILE),) -$(error CROSS_COMPILE not supported for scx selftests) -endif # CROSS_COMPILE - CURDIR := $(abspath .) REPOROOT := $(abspath ../../../..) TOOLSDIR := $(REPOROOT)/tools @@ -34,18 +23,23 @@ GENHDR := $(GENDIR)/autoconf.h SCXTOOLSDIR := $(TOOLSDIR)/sched_ext SCXTOOLSINCDIR := $(TOOLSDIR)/sched_ext/include -OUTPUT_DIR := $(CURDIR)/build +OUTPUT_DIR := $(OUTPUT)/build OBJ_DIR := $(OUTPUT_DIR)/obj INCLUDE_DIR := $(OUTPUT_DIR)/include BPFOBJ_DIR := $(OBJ_DIR)/libbpf SCXOBJ_DIR := $(OBJ_DIR)/sched_ext BPFOBJ := $(BPFOBJ_DIR)/libbpf.a LIBBPF_OUTPUT := $(OBJ_DIR)/libbpf/libbpf.a -DEFAULT_BPFTOOL := $(OUTPUT_DIR)/sbin/bpftool -HOST_BUILD_DIR := $(OBJ_DIR) -HOST_OUTPUT_DIR := $(OUTPUT_DIR) -VMLINUX_BTF_PATHS ?= ../../../../vmlinux \ +DEFAULT_BPFTOOL := $(OUTPUT_DIR)/host/sbin/bpftool +HOST_OBJ_DIR := $(OBJ_DIR)/host/bpftool +HOST_LIBBPF_OUTPUT := $(OBJ_DIR)/host/libbpf/ +HOST_LIBBPF_DESTDIR := $(OUTPUT_DIR)/host/ +HOST_DESTDIR := $(OUTPUT_DIR)/host/ + +VMLINUX_BTF_PATHS ?= $(if $(O),$(O)/vmlinux) \ + $(if $(KBUILD_OUTPUT),$(KBUILD_OUTPUT)/vmlinux) \ + ../../../../vmlinux \ /sys/kernel/btf/vmlinux \ /boot/vmlinux-$(shell uname -r) VMLINUX_BTF ?= $(abspath $(firstword $(wildcard $(VMLINUX_BTF_PATHS)))) @@ -80,17 +74,23 @@ IS_LITTLE_ENDIAN = $(shell $(CC) -dM -E - </dev/null | \ # Use '-idirafter': Don't interfere with include mechanics except where the # build would have failed anyways. define get_sys_includes -$(shell $(1) -v -E - </dev/null 2>&1 \ +$(shell $(1) $(2) -v -E - </dev/null 2>&1 \ | sed -n '/<...> search starts here:/,/End of search list./{ s| $/.*$|-idirafter \1|p }') \ -$(shell $(1) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}') +$(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}') endef +ifneq ($(CROSS_COMPILE),) +CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%)) +endif + +CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH)) + BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) \ $(if $(IS_LITTLE_ENDIAN),-mlittle-endian,-mbig-endian) \ -I$(CURDIR)/include -I$(CURDIR)/include/bpf-compat \ -I$(INCLUDE_DIR) -I$(APIDIR) -I$(SCXTOOLSINCDIR) \ -I$(REPOROOT)/include \ - $(call get_sys_includes,$(CLANG)) \ + $(CLANG_SYS_INCLUDES) \ -Wall -Wno-compare-distinct-pointer-types \ -Wno-incompatible-function-pointer-types \ -O2 -mcpu=v3 @@ -98,7 +98,7 @@ BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) \ # sort removes libbpf duplicates when not cross-building MAKE_DIRS := $(sort $(OBJ_DIR)/libbpf $(OBJ_DIR)/libbpf \ $(OBJ_DIR)/bpftool $(OBJ_DIR)/resolve_btfids \ - $(INCLUDE_DIR) $(SCXOBJ_DIR)) + $(HOST_OBJ_DIR) $(INCLUDE_DIR) $(SCXOBJ_DIR)) $(MAKE_DIRS): $(call msg,MKDIR,,$@) @@ -108,18 +108,19 @@ $(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ $(APIDIR)/linux/bpf.h \ | $(OBJ_DIR)/libbpf $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(OBJ_DIR)/libbpf/ \ + ARCH=$(ARCH) CC="$(CC)" CROSS_COMPILE=$(CROSS_COMPILE) \ EXTRA_CFLAGS='-g -O0 -fPIC' \ DESTDIR=$(OUTPUT_DIR) prefix= all install_headers $(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile) \ - $(LIBBPF_OUTPUT) | $(OBJ_DIR)/bpftool + $(LIBBPF_OUTPUT) | $(HOST_OBJ_DIR) $(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \ ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) \ EXTRA_CFLAGS='-g -O0' \ - OUTPUT=$(OBJ_DIR)/bpftool/ \ - LIBBPF_OUTPUT=$(OBJ_DIR)/libbpf/ \ - LIBBPF_DESTDIR=$(OUTPUT_DIR)/ \ - prefix= DESTDIR=$(OUTPUT_DIR)/ install-bin + OUTPUT=$(HOST_OBJ_DIR)/ \ + LIBBPF_OUTPUT=$(HOST_LIBBPF_OUTPUT) \ + LIBBPF_DESTDIR=$(HOST_LIBBPF_DESTDIR) \ + prefix= DESTDIR=$(HOST_DESTDIR) install-bin $(INCLUDE_DIR)/vmlinux.h: $(VMLINUX_BTF) $(BPFTOOL) | $(INCLUDE_DIR) ifeq ($(VMLINUX_H),) @@ -150,9 +151,7 @@ $(INCLUDE_DIR)/%.bpf.skel.h: $(SCXOBJ_DIR)/%.bpf.o $(INCLUDE_DIR)/vmlinux.h $(BP override define CLEAN rm -rf $(OUTPUT_DIR) - rm -f *.o *.bpf.o *.bpf.skel.h *.bpf.subskel.h rm -f $(TEST_GEN_PROGS) - rm -f runner endef # Every testcase takes all of the BPF progs are dependencies by default. This @@ -196,21 +195,15 @@ $(SCXOBJ_DIR)/runner.o: runner.c | $(SCXOBJ_DIR) # function doesn't support using implicit rules otherwise. $(testcase-targets): $(SCXOBJ_DIR)/%.o: %.c $(SCXOBJ_DIR)/runner.o $(all_test_bpfprogs) | $(SCXOBJ_DIR) $(eval test=$(patsubst %.o,%.c,$(notdir $@))) - $(CC) $(CFLAGS) -c $< -o $@ $(SCXOBJ_DIR)/runner.o + $(CC) $(CFLAGS) -c $< -o $@ $(SCXOBJ_DIR)/util.o: util.c | $(SCXOBJ_DIR) $(CC) $(CFLAGS) -c $< -o $@ -runner: $(SCXOBJ_DIR)/runner.o $(SCXOBJ_DIR)/util.o $(BPFOBJ) $(testcase-targets) +$(OUTPUT)/runner: $(SCXOBJ_DIR)/runner.o $(SCXOBJ_DIR)/util.o $(BPFOBJ) $(testcase-targets) @echo "$(testcase-targets)" $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) -TEST_GEN_PROGS := runner - -all: runner - -.PHONY: all clean help - .DEFAULT_GOAL := all .DELETE_ON_ERROR: base-commit: 87d6aab2389e5ce0197d8257d5f8ee965a67c4cd -- 2.43.0

1 year, 3 months

5
4
0 0

[PATCH v5 0/4] selftests: kvm: s390: Add ucontrol memory selftests

by Christoph Schlameuss

This patch series adds a some not yet picked selftests to the kvm s390x selftest suite. The additional test cases are covering: * Assert KVM_EXIT_S390_UCONTROL exit on not mapped memory access * Assert functionality of storage keys in ucontrol VM * Assert that memory region operations are rejected for ucontrol VMs Running the test cases requires sys_admin capabilities to start the ucontrol VM. This can be achieved by running as root or with a command like: sudo setpriv --reuid nobody --inh-caps -all,+sys_admin \ --ambient-caps -all,+sys_admin --bounding-set -all,+sys_admin \ ./ucontrol_test --- The patches in this series have been part of the previous patch series. The test cases added here do depend on the fixture added in the earlier patches. From v5 PATCH 7-9 the segment and page table generation has been removed and DAT has been disabled. Since DAT is not necessary to validate the KVM code. https://lore.kernel.org/kvm/20240807154512.316936-1-schlameuss@linux.ibm.co… v5: - rebased to current upstream master - corrected assertion on 0x00 to 0 - reworded fixup commit so that it can be merged on top of current upstream v4: - fix whitespaces in pointer function arguments (thanks Claudio) - fix whitespaces in comments (thanks Janosch) v3: - fix skey assertion (thanks Claudio) - introduce a wrapper around UCAS map and unmap ioctls to improve readability (Claudio) - add an displacement to accessed memory to assert translation intercepts actually point to segments to the uc_map_unmap test - add an misaligned failing mapping try to the uc_map_unmap test v2: - Reenable KSS intercept and handle it within skey test. - Modify the checked register between storing (sske) and reading (iske) it within the test program to make sure the. - Add an additional state assertion in the end of uc_skey - Fix some typos and white spaces. v1: - Remove segment and page table generation and disable DAT. This is not necessary to validate the KVM code. Christoph Schlameuss (4): selftests: kvm: s390: Add uc_map_unmap VM test case selftests: kvm: s390: Add uc_skey VM test case selftests: kvm: s390: Verify reject memory region operations for ucontrol VMs selftests: kvm: s390: Fix whitespace confusion in ucontrol test .../selftests/kvm/s390x/ucontrol_test.c | 262 +++++++++++++++++- 1 file changed, 257 insertions(+), 5 deletions(-) base-commit: 87d6aab2389e5ce0197d8257d5f8ee965a67c4cd -- 2.46.2

1 year, 3 months

2
8
0 0

[PATCH] selftest: hid: add the missing tests directory

by Yun Lu

Commit 160c826b4dd0 ("selftest: hid: add missing run-hid-tools-tests.sh") has added the run-hid-tools-tests.sh script for it to be installed, but I forgot to add the tests directory together. In fact, the run-hid-tools-tests.sh script uses the scripts in the tests directory to run tests. The tests directory also needs to be added to be installed. Fixes: ffb85d5c9e80 ("selftests: hid: import hid-tools hid-core tests") Cc: stable(a)vger.kernel.org Signed-off-by: Yun Lu <luyun(a)kylinos.cn> --- tools/testing/selftests/hid/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/hid/Makefile b/tools/testing/selftests/hid/Makefile index 38ae31bb07b5..662209f5fabc 100644 --- a/tools/testing/selftests/hid/Makefile +++ b/tools/testing/selftests/hid/Makefile @@ -18,6 +18,7 @@ TEST_PROGS += hid-usb_crash.sh TEST_PROGS += hid-wacom.sh TEST_FILES := run-hid-tools-tests.sh +TEST_FILES += tests CXX ?= $(CROSS_COMPILE)g++ -- 2.27.0

1 year, 3 months

3
2
0 0

kselftest/fixes kselftest-cpufreq: 4 runs, 3 regressions (linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b)

by kernelci.org bot

kselftest/fixes kselftest-cpufreq: 4 runs, 3 regressions (linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 sun50i-a64-pine64-plus | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 sun50i-h5-lib...ch-all-h3-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/fixes/kernel/linux_kselftest… Test: kselftest-cpufreq Tree: kselftest Branch: fixes Describe: linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: 34d5b600172b846161e507bdce132c98d9cc9701 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/6705caba4e0aebd8f2c8685d Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-12 (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… HTML log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-cpufreq.login: https://kernelci.org/test/case/id/6705caba4e0aebd8f2c8685e new failure (last pass: v6.12-rc1-5-g45a8897db67d4) platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ sun50i-a64-pine64-plus | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/6705cbeeebba5fb735c86855 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-12 (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… HTML log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-cpufreq.login: https://kernelci.org/test/case/id/6705cbeeebba5fb735c86856 new failure (last pass: v6.12-rc1-5-g45a8897db67d4) platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ sun50i-h5-lib...ch-all-h3-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/6705c966be664b4cfcc86855 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-12 (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… HTML log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-cpufreq.login: https://kernelci.org/test/case/id/6705c966be664b4cfcc86856 new failure (last pass: v6.12-rc1-5-g45a8897db67d4)

1 year, 3 months

1
0
0 0

kselftest/fixes kselftest-lib: 2 runs, 1 regressions (linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b)

by kernelci.org bot

kselftest/fixes kselftest-lib: 2 runs, 1 regressions (linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/fixes/kernel/linux_kselftest… Test: kselftest-lib Tree: kselftest Branch: fixes Describe: linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: 34d5b600172b846161e507bdce132c98d9cc9701 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/6705ca86b150574743c86855 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-12 (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… HTML log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-lib.login: https://kernelci.org/test/case/id/6705ca86b150574743c86856 new failure (last pass: v6.12-rc1-5-g45a8897db67d4)

1 year, 3 months

1
0
0 0

kselftest/fixes kselftest-seccomp: 2 runs, 1 regressions (linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b)

by kernelci.org bot

kselftest/fixes kselftest-seccomp: 2 runs, 1 regressions (linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/fixes/kernel/linux_kselftest… Test: kselftest-seccomp Tree: kselftest Branch: fixes Describe: linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: 34d5b600172b846161e507bdce132c98d9cc9701 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+-------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-broonie | gcc-12 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/6705c93503f7c09e74c86855 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-12 (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… HTML log: https://storage.kernelci.org//kselftest/fixes/linux_kselftest-fixes-6.12-rc… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-seccomp.login: https://kernelci.org/test/case/id/6705c93503f7c09e74c86856 new failure (last pass: v6.12-rc1-5-g45a8897db67d4)

1 year, 3 months

1
0
0 0

kselftest/fixes build: 7 builds: 2 failed, 5 passed, 1 warning (linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b)

by kernelci.org bot

kselftest/fixes build: 7 builds: 2 failed, 5 passed, 1 warning (linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b) Full Build Summary: https://kernelci.org/build/kselftest/branch/fixes/kernel/linux_kselftest-fi… Tree: kselftest Branch: fixes Git Describe: linux_kselftest-fixes-6.12-rc2-4-g34d5b600172b Git Commit: 34d5b600172b846161e507bdce132c98d9cc9701 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures Build Failures Detected: arm64: defconfig+kselftest+arm64-chromebook: (clang-16) FAIL defconfig+kselftest+arm64-chromebook: (gcc-12) FAIL Warnings Detected: arm64: arm: i386: x86_64: x86_64_defconfig+kselftest (clang-16): 1 warning Warnings summary: 1 vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x23: relocation to !ENDBR: .text+0x14fd19 ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-12) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-16) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-16) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x23: relocation to !ENDBR: .text+0x14fd19 --- For more info write to <info(a)kernelci.org>

1 year, 3 months

1
0
0 0

[PATCH net-next 0/5] selftests: mlxsw: Stabilize RED tests

by Petr Machata

Tweak the mlxsw-specific RED selftests to increase stability on Spectrum-3 and Spectrum-4 machines. Petr Machata (5): selftests: mlxsw: sch_red_ets: Increase required backlog selftests: mlxsw: sch_red_core: Increase backlog size tolerance selftests: mlxsw: sch_red_core: Sleep before querying queue depth selftests: mlxsw: sch_red_core: Send more packets for drop tests selftests: mlxsw: sch_red_core: Lower TBF rate .../drivers/net/mlxsw/sch_red_core.sh | 28 +++++++++++-------- .../drivers/net/mlxsw/sch_red_ets.sh | 8 +++--- 2 files changed, 20 insertions(+), 16 deletions(-) -- 2.45.0

1 year, 3 months

2
6
0 0

[PATCH v2] selftests: vDSO: Explicitly include sched.h

by Yu Liao

The previous commit introduced the use of CLONE_NEWTIME without including <sched.h> which contains its definition. Add an explicit include of <sched.h> to ensure that CLONE_NEWTIME is correctly defined before it is used. Fixes: 2aec90036dcd ("selftests: vDSO: ensure vgetrandom works in a time namespace") Signed-off-by: Yu Liao <liaoyu15(a)huawei.com> --- Changes in v2: - Include <sched.h> instead of <linux/sched.h> v1: https://lore.kernel.org/all/20240919111841.20226-1-liaoyu15@huawei.com/ tools/testing/selftests/vDSO/vdso_test_getrandom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/vDSO/vdso_test_getrandom.c b/tools/testing/selftests/vDSO/vdso_test_getrandom.c index 72a1d9b43a84..ddf37e3ab18b 100644 --- a/tools/testing/selftests/vDSO/vdso_test_getrandom.c +++ b/tools/testing/selftests/vDSO/vdso_test_getrandom.c @@ -11,6 +11,7 @@ #include <string.h> #include <time.h> #include <unistd.h> +#include <sched.h> #include <signal.h> #include <sys/auxv.h> #include <sys/mman.h> -- 2.33.0

1 year, 3 months

2
1
0 0

[PATCH kselftest 0/3] getrandom & chacha cleanups

by Jason A. Donenfeld

Hi Shuah, I've now read your email several times trying to figure out what you meant and what your objections are. This series is my best attempt at trying to satisfy that. But my understanding still has a lot of question marks, so I may have missed your point here. Nonetheless, maybe this moves things forward a bit. Jason Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Greg KH <greg(a)kroah.com> Jason A. Donenfeld (3): selftests: vDSO: condition chacha build on chacha implementation selftests: vDSO: unconditionally build getrandom test selftests: vDSO: improve getrandom and chacha error messages tools/testing/selftests/vDSO/Makefile | 4 +- .../testing/selftests/vDSO/vdso_test_chacha.c | 27 ++++--- .../selftests/vDSO/vdso_test_getrandom.c | 75 ++++++++----------- 3 files changed, 52 insertions(+), 54 deletions(-) -- 2.46.0

1 year, 3 months

3
16
0 0

[PATCH v4 0/2] Exposing nice CPU usage to userspace

by Joshua Hahn

Changes in v4 - Removed unnecessary forking from selftest. - Style changes in rstat.c (fallthrough & indents) - Fixed a selftest bug that raised false negatives, caused by cputime_adjust sometimes adjusting utime below ntime. - Reworded cover letter for clarity & motivation Changes in v3 - Signed-off-by & renamed subject for clarity. Changes in v2 - Edited commit messages for clarity. Niced CPU usage is a metric reported in host-level /proc/stat, but is not currently reported in cgroup-level statistics. Thus, even if one can observe that a fracion of the host's CPU time is spent on (non-)nice tasks, the distribution of the CPU usage across cgroups is not readily available to the user. This patch introduces cgroup-level niced CPU utilization to cpu.stat. Exposing this metric will allow users to accurately probe the niced CPU metric for each workload, and make more informed decisions when directing higher priority tasks. For instance, service routers will be able to probe cgroups in the host to determine CPU time spent on niced processes in each cgroup, and direct more traffic to cgroups with lower non-nice CPU utilization. Signed-off-by Joshua Hahn <joshua.hahnjy(a)gmail.com> Joshua Hahn (2): Tracking cgroup-level niced CPU time Selftests for niced CPU statistics include/linux/cgroup-defs.h | 1 + kernel/cgroup/rstat.c | 19 ++++-- tools/testing/selftests/cgroup/test_cpu.c | 75 +++++++++++++++++++++++ 3 files changed, 90 insertions(+), 5 deletions(-) -- 2.43.5

1 year, 3 months

2
3
0 0

[PATCH bpf] selftests/bpf: add missing header include for htons

by Alexis Lothoré (eBPF Foundation)

Including the network_helpers.h header in tests can lead to the following build error: ./network_helpers.h: In function ‘csum_tcpudp_magic’: ./network_helpers.h:116:14: error: implicit declaration of function \ ‘htons’ [-Werror=implicit-function-declaration] 116 | s += htons(proto + len); The error is avoided in many cases thanks to some other headers included earlier and bringing in arpa/inet.h (ie: test_progs.h). Make sure that test_progs build success does not depend on header ordering by adding the missing header include in network_helpers.h Fixes: f6642de0c3e9 ("selftests/bpf: Add csum helpers") Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore(a)bootlin.com> --- tools/testing/selftests/bpf/network_helpers.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/bpf/network_helpers.h b/tools/testing/selftests/bpf/network_helpers.h index c72c16e1aff825439896b38e59962ffafe92dc71..5764155b6d25188ed38e828e1e4a8a08f8a83934 100644 --- a/tools/testing/selftests/bpf/network_helpers.h +++ b/tools/testing/selftests/bpf/network_helpers.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ #ifndef __NETWORK_HELPERS_H #define __NETWORK_HELPERS_H +#include <arpa/inet.h> #include <sys/socket.h> #include <sys/types.h> #include <linux/types.h> --- base-commit: 67a7c7b656cfc10a7280f71641fb9e88726e8a5d change-id: 20241008-network_helpers_fix-bbb7d1589930 Best regards, -- Alexis Lothoré, Bootlin Embedded Linux and Kernel engineering https://bootlin.com

1 year, 3 months

2
1
0 0

[PATCH] selftests: make kselftest-clean remove libynl outputs

by Greg Thelen

Starting with 6.12 commit 85585b4bc8d8 ("selftests: add ncdevmem, netcat for devmem TCP") kselftest-all creates additional outputs that kselftest-clean does not cleanup: $ make defconfig $ make kselftest-all $ make kselftest-clean $ git clean -ndxf | grep tools/net Would remove tools/net/ynl/lib/__pycache__/ Would remove tools/net/ynl/lib/ynl.a Would remove tools/net/ynl/lib/ynl.d Would remove tools/net/ynl/lib/ynl.o Make kselftest-clean remove the newly added net/ynl outputs. Fixes: 85585b4bc8d8 ("selftests: add ncdevmem, netcat for devmem TCP") Signed-off-by: Greg Thelen <gthelen(a)google.com> --- tools/testing/selftests/net/ynl.mk | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/testing/selftests/net/ynl.mk b/tools/testing/selftests/net/ynl.mk index 59cb26cf3f73..1ef24119def0 100644 --- a/tools/testing/selftests/net/ynl.mk +++ b/tools/testing/selftests/net/ynl.mk @@ -19,3 +19,7 @@ $(YNL_OUTPUTS): CFLAGS += \ $(OUTPUT)/libynl.a: $(Q)$(MAKE) -C $(top_srcdir)/tools/net/ynl GENS="$(YNL_GENS)" libynl.a $(Q)cp $(top_srcdir)/tools/net/ynl/libynl.a $(OUTPUT)/libynl.a + +EXTRA_CLEAN += \ + $(top_srcdir)/tools/net/ynl/lib/__pycache__ \ + $(top_srcdir)/tools/net/ynl/lib/*.[ado] -- 2.47.0.rc0.187.ge670bccf7e-goog

1 year, 3 months

5
4
0 0

[PATCH net v2 0/3] selftests: net: add missing gitignore and EXTRA_CLEAN entries.

by Javier Carrasco

This series is a cherry-pick on top of v6.12-rc1 from the one I sent for selftests with other patches that were not net-related: https://lore.kernel.org/all/20240925-selftests-gitignore-v3-0-9db896474170@… The patches have not been modified, and the Reviewed-by tags have been kept. Signed-off-by: Javier Carrasco <javier.carrasco.cruz(a)gmail.com> --- Changes in v2: - rebase to net/main and solve conflicts in rds/Makefile - Tag series for net. - Link to v1: https://lore.kernel.org/r/20240930-net-selftests-gitignore-v1-0-65225a85594… --- Javier Carrasco (3): selftests: net: add msg_oob to gitignore selftests: net: rds: add include.sh to EXTRA_CLEAN selftests: net: rds: add gitignore file for include.sh tools/testing/selftests/net/.gitignore | 1 + tools/testing/selftests/net/rds/.gitignore | 1 + tools/testing/selftests/net/rds/Makefile | 2 +- 3 files changed, 3 insertions(+), 1 deletion(-) --- base-commit: 9234a2549cb6ac038bec36cc7c084218e9575513 change-id: 20240930-net-selftests-gitignore-18b844f29391 Best regards, -- Javier Carrasco <javier.carrasco.cruz(a)gmail.com>

1 year, 3 months

2
4
0 0

[PATCH net-next v20 11/14] mm: page_frag: add testing for the newly added prepare API

by Yunsheng Lin

Add testing for the newly added prepare API, for both aligned and non-aligned API, also probe API is also tested along with prepare API. CC: Alexander Duyck <alexander.duyck(a)gmail.com> Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> --- .../selftests/mm/page_frag/page_frag_test.c | 66 +++++++++++++++++-- tools/testing/selftests/mm/run_vmtests.sh | 4 ++ tools/testing/selftests/mm/test_page_frag.sh | 31 +++++++++ 3 files changed, 96 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/mm/page_frag/page_frag_test.c b/tools/testing/selftests/mm/page_frag/page_frag_test.c index 36543a129e40..567bcc6a181e 100644 --- a/tools/testing/selftests/mm/page_frag/page_frag_test.c +++ b/tools/testing/selftests/mm/page_frag/page_frag_test.c @@ -29,6 +29,10 @@ static bool test_align; module_param(test_align, bool, 0); MODULE_PARM_DESC(test_align, "use align API for testing"); +static bool test_prepare; +module_param(test_prepare, bool, 0); +MODULE_PARM_DESC(test_prepare, "use prepare API for testing"); + static int test_alloc_len = 2048; module_param(test_alloc_len, int, 0); MODULE_PARM_DESC(test_alloc_len, "alloc len for testing"); @@ -68,6 +72,18 @@ static int page_frag_pop_thread(void *arg) return 0; } +static void frag_frag_test_commit(struct page_frag_cache *nc, + struct page_frag *prepare_pfrag, + struct page_frag *probe_pfrag, + unsigned int used_sz) +{ + WARN_ON_ONCE(prepare_pfrag->page != probe_pfrag->page || + prepare_pfrag->offset != probe_pfrag->offset || + prepare_pfrag->size != probe_pfrag->size); + + page_frag_commit(nc, prepare_pfrag, used_sz); +} + static int page_frag_push_thread(void *arg) { struct ptr_ring *ring = arg; @@ -80,13 +96,52 @@ static int page_frag_push_thread(void *arg) int ret; if (test_align) { - va = page_frag_alloc_align(&test_nc, test_alloc_len, - GFP_KERNEL, SMP_CACHE_BYTES); + if (test_prepare) { + struct page_frag prepare_frag, probe_frag; + void *probe_va; + + va = page_frag_alloc_refill_prepare_align(&test_nc, + test_alloc_len, + &prepare_frag, + GFP_KERNEL, + SMP_CACHE_BYTES); + + probe_va = __page_frag_alloc_refill_probe_align(&test_nc, + test_alloc_len, + &probe_frag, + -SMP_CACHE_BYTES); + WARN_ON_ONCE(va != probe_va); + + if (likely(va)) + frag_frag_test_commit(&test_nc, &prepare_frag, + &probe_frag, test_alloc_len); + } else { + va = page_frag_alloc_align(&test_nc, + test_alloc_len, + GFP_KERNEL, + SMP_CACHE_BYTES); + } WARN_ONCE((unsigned long)va & (SMP_CACHE_BYTES - 1), "unaligned va returned\n"); } else { - va = page_frag_alloc(&test_nc, test_alloc_len, GFP_KERNEL); + if (test_prepare) { + struct page_frag prepare_frag, probe_frag; + void *probe_va; + + va = page_frag_alloc_refill_prepare(&test_nc, test_alloc_len, + &prepare_frag, GFP_KERNEL); + + probe_va = page_frag_alloc_refill_probe(&test_nc, test_alloc_len, + &probe_frag); + + WARN_ON_ONCE(va != probe_va); + if (likely(va)) + frag_frag_test_commit(&test_nc, &prepare_frag, + &probe_frag, test_alloc_len); + } else { + va = page_frag_alloc(&test_nc, test_alloc_len, GFP_KERNEL); + } } if (!va) @@ -152,8 +207,9 @@ static int __init page_frag_test_init(void) test_pushed, test_popped); duration = (u64)ktime_us_delta(ktime_get(), start); - pr_info("%d of iterations for %s testing took: %lluus\n", nr_test, - test_align ? "aligned" : "non-aligned", duration); + pr_info("%d of iterations for %s %s API testing took: %lluus\n", nr_test, + test_align ? "aligned" : "non-aligned", + test_prepare ? "prepare" : "alloc", duration); ptr_ring_cleanup(&ptr_ring, NULL); page_frag_cache_drain(&test_nc); diff --git a/tools/testing/selftests/mm/run_vmtests.sh b/tools/testing/selftests/mm/run_vmtests.sh index 2c5394584af4..f6ff9080a6f2 100755 --- a/tools/testing/selftests/mm/run_vmtests.sh +++ b/tools/testing/selftests/mm/run_vmtests.sh @@ -464,6 +464,10 @@ CATEGORY="page_frag" run_test ./test_page_frag.sh aligned CATEGORY="page_frag" run_test ./test_page_frag.sh nonaligned +CATEGORY="page_frag" run_test ./test_page_frag.sh aligned_prepare + +CATEGORY="page_frag" run_test ./test_page_frag.sh nonaligned_prepare + echo "SUMMARY: PASS=${count_pass} SKIP=${count_skip} FAIL=${count_fail}" | tap_prefix echo "1..${count_total}" | tap_output diff --git a/tools/testing/selftests/mm/test_page_frag.sh b/tools/testing/selftests/mm/test_page_frag.sh index d750d910c899..71c3531fa38e 100755 --- a/tools/testing/selftests/mm/test_page_frag.sh +++ b/tools/testing/selftests/mm/test_page_frag.sh @@ -36,6 +36,8 @@ ksft_skip=4 SMOKE_PARAM="test_push_cpu=$TEST_CPU_0 test_pop_cpu=$TEST_CPU_1" NONALIGNED_PARAM="$SMOKE_PARAM test_alloc_len=75 nr_test=$NR_TEST" ALIGNED_PARAM="$NONALIGNED_PARAM test_align=1" +NONALIGNED_PREPARE_PARAM="$NONALIGNED_PARAM test_prepare=1" +ALIGNED_PREPARE_PARAM="$ALIGNED_PARAM test_prepare=1" check_test_requirements() { @@ -74,6 +76,24 @@ run_aligned_check() echo "Check the kernel ring buffer to see the summary." } +run_nonaligned_prepare_check() +{ + echo "Run performance tests to evaluate how fast nonaligned prepare API is." + + insmod $DRIVER $NONALIGNED_PREPARE_PARAM > /dev/null 2>&1 + echo "Done." + echo "Ccheck the kernel ring buffer to see the summary." +} + +run_aligned_prepare_check() +{ + echo "Run performance tests to evaluate how fast aligned prepare API is." + + insmod $DRIVER $ALIGNED_PREPARE_PARAM > /dev/null 2>&1 + echo "Done." + echo "Check the kernel ring buffer to see the summary." +} + run_smoke_check() { echo "Run smoke test." @@ -86,6 +106,7 @@ run_smoke_check() usage() { echo -n "Usage: $0 [ aligned ] | [ nonaligned ] | | [ smoke ] | " + echo "[ aligned_prepare ] | [ nonaligned_prepare ] | " echo "manual parameters" echo echo "Valid tests and parameters:" @@ -106,6 +127,12 @@ usage() echo "# Performance testing for aligned alloc API" echo "$0 aligned" echo + echo "# Performance testing for nonaligned prepare API" + echo "$0 nonaligned_prepare" + echo + echo "# Performance testing for aligned prepare API" + echo "$0 aligned_prepare" + echo exit 0 } @@ -159,6 +186,10 @@ function run_test() run_nonaligned_check elif [[ "$1" = "aligned" ]]; then run_aligned_check + elif [[ "$1" = "nonaligned_prepare" ]]; then + run_nonaligned_prepare_check + elif [[ "$1" = "aligned_prepare" ]]; then + run_aligned_prepare_check else run_manual_check $@ fi -- 2.33.0

1 year, 3 months

1
0
0 0

[PATCH net-next v20 04/14] mm: page_frag: avoid caller accessing 'page_frag_cache' directly

by Yunsheng Lin

Use appropriate frag_page API instead of caller accessing 'page_frag_cache' directly. CC: Alexander Duyck <alexander.duyck(a)gmail.com> Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck(a)fb.com> Acked-by: Chuck Lever <chuck.lever(a)oracle.com> --- drivers/vhost/net.c | 2 +- include/linux/page_frag_cache.h | 10 ++++++++++ net/core/skbuff.c | 6 +++--- net/rxrpc/conn_object.c | 4 +--- net/rxrpc/local_object.c | 4 +--- net/sunrpc/svcsock.c | 6 ++---- tools/testing/selftests/mm/page_frag/page_frag_test.c | 2 +- 7 files changed, 19 insertions(+), 15 deletions(-) diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index f16279351db5..9ad37c012189 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -1325,7 +1325,7 @@ static int vhost_net_open(struct inode *inode, struct file *f) vqs[VHOST_NET_VQ_RX]); f->private_data = n; - n->pf_cache.va = NULL; + page_frag_cache_init(&n->pf_cache); return 0; } diff --git a/include/linux/page_frag_cache.h b/include/linux/page_frag_cache.h index 67ac8626ed9b..0a52f7a179c8 100644 --- a/include/linux/page_frag_cache.h +++ b/include/linux/page_frag_cache.h @@ -7,6 +7,16 @@ #include <linux/mm_types_task.h> #include <linux/types.h> +static inline void page_frag_cache_init(struct page_frag_cache *nc) +{ + nc->va = NULL; +} + +static inline bool page_frag_cache_is_pfmemalloc(struct page_frag_cache *nc) +{ + return !!nc->pfmemalloc; +} + void page_frag_cache_drain(struct page_frag_cache *nc); void __page_frag_cache_drain(struct page *page, unsigned int count); void *__page_frag_alloc_align(struct page_frag_cache *nc, unsigned int fragsz, diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 74149dc4ee31..ca01880c7ad0 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -753,14 +753,14 @@ struct sk_buff *__netdev_alloc_skb(struct net_device *dev, unsigned int len, if (in_hardirq() || irqs_disabled()) { nc = this_cpu_ptr(&netdev_alloc_cache); data = page_frag_alloc(nc, len, gfp_mask); - pfmemalloc = nc->pfmemalloc; + pfmemalloc = page_frag_cache_is_pfmemalloc(nc); } else { local_bh_disable(); local_lock_nested_bh(&napi_alloc_cache.bh_lock); nc = this_cpu_ptr(&napi_alloc_cache.page); data = page_frag_alloc(nc, len, gfp_mask); - pfmemalloc = nc->pfmemalloc; + pfmemalloc = page_frag_cache_is_pfmemalloc(nc); local_unlock_nested_bh(&napi_alloc_cache.bh_lock); local_bh_enable(); @@ -850,7 +850,7 @@ struct sk_buff *napi_alloc_skb(struct napi_struct *napi, unsigned int len) len = SKB_HEAD_ALIGN(len); data = page_frag_alloc(&nc->page, len, gfp_mask); - pfmemalloc = nc->page.pfmemalloc; + pfmemalloc = page_frag_cache_is_pfmemalloc(&nc->page); } local_unlock_nested_bh(&napi_alloc_cache.bh_lock); diff --git a/net/rxrpc/conn_object.c b/net/rxrpc/conn_object.c index 1539d315afe7..694c4df7a1a3 100644 --- a/net/rxrpc/conn_object.c +++ b/net/rxrpc/conn_object.c @@ -337,9 +337,7 @@ static void rxrpc_clean_up_connection(struct work_struct *work) */ rxrpc_purge_queue(&conn->rx_queue); - if (conn->tx_data_alloc.va) - __page_frag_cache_drain(virt_to_page(conn->tx_data_alloc.va), - conn->tx_data_alloc.pagecnt_bias); + page_frag_cache_drain(&conn->tx_data_alloc); call_rcu(&conn->rcu, rxrpc_rcu_free_connection); } diff --git a/net/rxrpc/local_object.c b/net/rxrpc/local_object.c index 504453c688d7..a8cffe47cf01 100644 --- a/net/rxrpc/local_object.c +++ b/net/rxrpc/local_object.c @@ -452,9 +452,7 @@ void rxrpc_destroy_local(struct rxrpc_local *local) #endif rxrpc_purge_queue(&local->rx_queue); rxrpc_purge_client_connections(local); - if (local->tx_alloc.va) - __page_frag_cache_drain(virt_to_page(local->tx_alloc.va), - local->tx_alloc.pagecnt_bias); + page_frag_cache_drain(&local->tx_alloc); } /* diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 825ec5357691..b785425c3315 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -1608,7 +1608,6 @@ static void svc_tcp_sock_detach(struct svc_xprt *xprt) static void svc_sock_free(struct svc_xprt *xprt) { struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt); - struct page_frag_cache *pfc = &svsk->sk_frag_cache; struct socket *sock = svsk->sk_sock; trace_svcsock_free(svsk, sock); @@ -1618,8 +1617,7 @@ static void svc_sock_free(struct svc_xprt *xprt) sockfd_put(sock); else sock_release(sock); - if (pfc->va) - __page_frag_cache_drain(virt_to_head_page(pfc->va), - pfc->pagecnt_bias); + + page_frag_cache_drain(&svsk->sk_frag_cache); kfree(svsk); } diff --git a/tools/testing/selftests/mm/page_frag/page_frag_test.c b/tools/testing/selftests/mm/page_frag/page_frag_test.c index fdf204550c9a..36543a129e40 100644 --- a/tools/testing/selftests/mm/page_frag/page_frag_test.c +++ b/tools/testing/selftests/mm/page_frag/page_frag_test.c @@ -117,7 +117,7 @@ static int __init page_frag_test_init(void) u64 duration; int ret; - test_nc.va = NULL; + page_frag_cache_init(&test_nc); atomic_set(&nthreads, 2); init_completion(&wait); -- 2.33.0

1 year, 3 months

1
0
0 0

[PATCH net-next v20 02/14] mm: move the page fragment allocator from page_alloc into its own file

by Yunsheng Lin

Inspired by [1], move the page fragment allocator from page_alloc into its own c file and header file, as we are about to make more change for it to replace another page_frag implementation in sock.c As this patchset is going to replace 'struct page_frag' with 'struct page_frag_cache' in sched.h, including page_frag_cache.h in sched.h has a compiler error caused by interdependence between mm_types.h and mm.h for asm-offsets.c, see [2]. So avoid the compiler error by moving 'struct page_frag_cache' to mm_types_task.h as suggested by Alexander, see [3]. 1. https://lore.kernel.org/all/20230411160902.4134381-3-dhowells@redhat.com/ 2. https://lore.kernel.org/all/15623dac-9358-4597-b3ee-3694a5956920@gmail.com/ 3. https://lore.kernel.org/all/CAKgT0UdH1yD=LSCXFJ=YM_aiA4OomD-2wXykO42bizaWMt… CC: David Howells <dhowells(a)redhat.com> CC: Alexander Duyck <alexander.duyck(a)gmail.com> Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> Acked-by: Andrew Morton <akpm(a)linux-foundation.org> Reviewed-by: Alexander Duyck <alexanderduyck(a)fb.com> --- include/linux/gfp.h | 22 --- include/linux/mm_types.h | 18 --- include/linux/mm_types_task.h | 18 +++ include/linux/page_frag_cache.h | 31 ++++ include/linux/skbuff.h | 1 + mm/Makefile | 1 + mm/page_alloc.c | 136 ---------------- mm/page_frag_cache.c | 145 ++++++++++++++++++ .../selftests/mm/page_frag/page_frag_test.c | 2 +- 9 files changed, 197 insertions(+), 177 deletions(-) create mode 100644 include/linux/page_frag_cache.h create mode 100644 mm/page_frag_cache.c diff --git a/include/linux/gfp.h b/include/linux/gfp.h index a951de920e20..a0a6d25f883f 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -371,28 +371,6 @@ __meminit void *alloc_pages_exact_nid_noprof(int nid, size_t size, gfp_t gfp_mas extern void __free_pages(struct page *page, unsigned int order); extern void free_pages(unsigned long addr, unsigned int order); -struct page_frag_cache; -void page_frag_cache_drain(struct page_frag_cache *nc); -extern void __page_frag_cache_drain(struct page *page, unsigned int count); -void *__page_frag_alloc_align(struct page_frag_cache *nc, unsigned int fragsz, - gfp_t gfp_mask, unsigned int align_mask); - -static inline void *page_frag_alloc_align(struct page_frag_cache *nc, - unsigned int fragsz, gfp_t gfp_mask, - unsigned int align) -{ - WARN_ON_ONCE(!is_power_of_2(align)); - return __page_frag_alloc_align(nc, fragsz, gfp_mask, -align); -} - -static inline void *page_frag_alloc(struct page_frag_cache *nc, - unsigned int fragsz, gfp_t gfp_mask) -{ - return __page_frag_alloc_align(nc, fragsz, gfp_mask, ~0u); -} - -extern void page_frag_free(void *addr); - #define __free_page(page) __free_pages((page), 0) #define free_page(addr) free_pages((addr), 0) diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 6e3bdf8e38bc..92314ef2d978 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -521,9 +521,6 @@ static_assert(sizeof(struct ptdesc) <= sizeof(struct page)); */ #define STRUCT_PAGE_MAX_SHIFT (order_base_2(sizeof(struct page))) -#define PAGE_FRAG_CACHE_MAX_SIZE __ALIGN_MASK(32768, ~PAGE_MASK) -#define PAGE_FRAG_CACHE_MAX_ORDER get_order(PAGE_FRAG_CACHE_MAX_SIZE) - /* * page_private can be used on tail pages. However, PagePrivate is only * checked by the VM on the head page. So page_private on the tail pages @@ -542,21 +539,6 @@ static inline void *folio_get_private(struct folio *folio) return folio->private; } -struct page_frag_cache { - void * va; -#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) - __u16 offset; - __u16 size; -#else - __u32 offset; -#endif - /* we maintain a pagecount bias, so that we dont dirty cache line - * containing page->_refcount every time we allocate a fragment. - */ - unsigned int pagecnt_bias; - bool pfmemalloc; -}; - typedef unsigned long vm_flags_t; /* diff --git a/include/linux/mm_types_task.h b/include/linux/mm_types_task.h index bff5706b76e1..0ac6daebdd5c 100644 --- a/include/linux/mm_types_task.h +++ b/include/linux/mm_types_task.h @@ -8,6 +8,7 @@ * (These are defined separately to decouple sched.h from mm_types.h as much as possible.) */ +#include <linux/align.h> #include <linux/types.h> #include <asm/page.h> @@ -43,6 +44,23 @@ struct page_frag { #endif }; +#define PAGE_FRAG_CACHE_MAX_SIZE __ALIGN_MASK(32768, ~PAGE_MASK) +#define PAGE_FRAG_CACHE_MAX_ORDER get_order(PAGE_FRAG_CACHE_MAX_SIZE) +struct page_frag_cache { + void *va; +#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) + __u16 offset; + __u16 size; +#else + __u32 offset; +#endif + /* we maintain a pagecount bias, so that we dont dirty cache line + * containing page->_refcount every time we allocate a fragment. + */ + unsigned int pagecnt_bias; + bool pfmemalloc; +}; + /* Track pages that require TLB flushes */ struct tlbflush_unmap_batch { #ifdef CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH diff --git a/include/linux/page_frag_cache.h b/include/linux/page_frag_cache.h new file mode 100644 index 000000000000..67ac8626ed9b --- /dev/null +++ b/include/linux/page_frag_cache.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _LINUX_PAGE_FRAG_CACHE_H +#define _LINUX_PAGE_FRAG_CACHE_H + +#include <linux/log2.h> +#include <linux/mm_types_task.h> +#include <linux/types.h> + +void page_frag_cache_drain(struct page_frag_cache *nc); +void __page_frag_cache_drain(struct page *page, unsigned int count); +void *__page_frag_alloc_align(struct page_frag_cache *nc, unsigned int fragsz, + gfp_t gfp_mask, unsigned int align_mask); + +static inline void *page_frag_alloc_align(struct page_frag_cache *nc, + unsigned int fragsz, gfp_t gfp_mask, + unsigned int align) +{ + WARN_ON_ONCE(!is_power_of_2(align)); + return __page_frag_alloc_align(nc, fragsz, gfp_mask, -align); +} + +static inline void *page_frag_alloc(struct page_frag_cache *nc, + unsigned int fragsz, gfp_t gfp_mask) +{ + return __page_frag_alloc_align(nc, fragsz, gfp_mask, ~0u); +} + +void page_frag_free(void *addr); + +#endif diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 39f1d16f3628..560e2b49f98b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -31,6 +31,7 @@ #include <linux/in6.h> #include <linux/if_packet.h> #include <linux/llist.h> +#include <linux/page_frag_cache.h> #include <net/flow.h> #if IS_ENABLED(CONFIG_NF_CONNTRACK) #include <linux/netfilter/nf_conntrack_common.h> diff --git a/mm/Makefile b/mm/Makefile index d5639b036166..dba52bb0da8a 100644 --- a/mm/Makefile +++ b/mm/Makefile @@ -65,6 +65,7 @@ page-alloc-$(CONFIG_SHUFFLE_PAGE_ALLOCATOR) += shuffle.o memory-hotplug-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o obj-y += page-alloc.o +obj-y += page_frag_cache.o obj-y += init-mm.o obj-y += memblock.o obj-y += $(memory-hotplug-y) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 8afab64814dc..6ca2abce857b 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -4836,142 +4836,6 @@ void free_pages(unsigned long addr, unsigned int order) EXPORT_SYMBOL(free_pages); -/* - * Page Fragment: - * An arbitrary-length arbitrary-offset area of memory which resides - * within a 0 or higher order page. Multiple fragments within that page - * are individually refcounted, in the page's reference counter. - * - * The page_frag functions below provide a simple allocation framework for - * page fragments. This is used by the network stack and network device - * drivers to provide a backing region of memory for use as either an - * sk_buff->head, or to be used in the "frags" portion of skb_shared_info. - */ -static struct page *__page_frag_cache_refill(struct page_frag_cache *nc, - gfp_t gfp_mask) -{ - struct page *page = NULL; - gfp_t gfp = gfp_mask; - -#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) - gfp_mask = (gfp_mask & ~__GFP_DIRECT_RECLAIM) | __GFP_COMP | - __GFP_NOWARN | __GFP_NORETRY | __GFP_NOMEMALLOC; - page = alloc_pages_node(NUMA_NO_NODE, gfp_mask, - PAGE_FRAG_CACHE_MAX_ORDER); - nc->size = page ? PAGE_FRAG_CACHE_MAX_SIZE : PAGE_SIZE; -#endif - if (unlikely(!page)) - page = alloc_pages_node(NUMA_NO_NODE, gfp, 0); - - nc->va = page ? page_address(page) : NULL; - - return page; -} - -void page_frag_cache_drain(struct page_frag_cache *nc) -{ - if (!nc->va) - return; - - __page_frag_cache_drain(virt_to_head_page(nc->va), nc->pagecnt_bias); - nc->va = NULL; -} -EXPORT_SYMBOL(page_frag_cache_drain); - -void __page_frag_cache_drain(struct page *page, unsigned int count) -{ - VM_BUG_ON_PAGE(page_ref_count(page) == 0, page); - - if (page_ref_sub_and_test(page, count)) - free_unref_page(page, compound_order(page)); -} -EXPORT_SYMBOL(__page_frag_cache_drain); - -void *__page_frag_alloc_align(struct page_frag_cache *nc, - unsigned int fragsz, gfp_t gfp_mask, - unsigned int align_mask) -{ - unsigned int size = PAGE_SIZE; - struct page *page; - int offset; - - if (unlikely(!nc->va)) { -refill: - page = __page_frag_cache_refill(nc, gfp_mask); - if (!page) - return NULL; - -#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) - /* if size can vary use size else just use PAGE_SIZE */ - size = nc->size; -#endif - /* Even if we own the page, we do not use atomic_set(). - * This would break get_page_unless_zero() users. - */ - page_ref_add(page, PAGE_FRAG_CACHE_MAX_SIZE); - - /* reset page count bias and offset to start of new frag */ - nc->pfmemalloc = page_is_pfmemalloc(page); - nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; - nc->offset = size; - } - - offset = nc->offset - fragsz; - if (unlikely(offset < 0)) { - page = virt_to_page(nc->va); - - if (!page_ref_sub_and_test(page, nc->pagecnt_bias)) - goto refill; - - if (unlikely(nc->pfmemalloc)) { - free_unref_page(page, compound_order(page)); - goto refill; - } - -#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) - /* if size can vary use size else just use PAGE_SIZE */ - size = nc->size; -#endif - /* OK, page count is 0, we can safely set it */ - set_page_count(page, PAGE_FRAG_CACHE_MAX_SIZE + 1); - - /* reset page count bias and offset to start of new frag */ - nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; - offset = size - fragsz; - if (unlikely(offset < 0)) { - /* - * The caller is trying to allocate a fragment - * with fragsz > PAGE_SIZE but the cache isn't big - * enough to satisfy the request, this may - * happen in low memory conditions. - * We don't release the cache page because - * it could make memory pressure worse - * so we simply return NULL here. - */ - return NULL; - } - } - - nc->pagecnt_bias--; - offset &= align_mask; - nc->offset = offset; - - return nc->va + offset; -} -EXPORT_SYMBOL(__page_frag_alloc_align); - -/* - * Frees a page fragment allocated out of either a compound or order 0 page. - */ -void page_frag_free(void *addr) -{ - struct page *page = virt_to_head_page(addr); - - if (unlikely(put_page_testzero(page))) - free_unref_page(page, compound_order(page)); -} -EXPORT_SYMBOL(page_frag_free); - static void *make_alloc_exact(unsigned long addr, unsigned int order, size_t size) { diff --git a/mm/page_frag_cache.c b/mm/page_frag_cache.c new file mode 100644 index 000000000000..609a485cd02a --- /dev/null +++ b/mm/page_frag_cache.c @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Page fragment allocator + * + * Page Fragment: + * An arbitrary-length arbitrary-offset area of memory which resides within a + * 0 or higher order page. Multiple fragments within that page are + * individually refcounted, in the page's reference counter. + * + * The page_frag functions provide a simple allocation framework for page + * fragments. This is used by the network stack and network device drivers to + * provide a backing region of memory for use as either an sk_buff->head, or to + * be used in the "frags" portion of skb_shared_info. + */ + +#include <linux/export.h> +#include <linux/gfp_types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/page_frag_cache.h> +#include "internal.h" + +static struct page *__page_frag_cache_refill(struct page_frag_cache *nc, + gfp_t gfp_mask) +{ + struct page *page = NULL; + gfp_t gfp = gfp_mask; + +#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) + gfp_mask = (gfp_mask & ~__GFP_DIRECT_RECLAIM) | __GFP_COMP | + __GFP_NOWARN | __GFP_NORETRY | __GFP_NOMEMALLOC; + page = alloc_pages_node(NUMA_NO_NODE, gfp_mask, + PAGE_FRAG_CACHE_MAX_ORDER); + nc->size = page ? PAGE_FRAG_CACHE_MAX_SIZE : PAGE_SIZE; +#endif + if (unlikely(!page)) + page = alloc_pages_node(NUMA_NO_NODE, gfp, 0); + + nc->va = page ? page_address(page) : NULL; + + return page; +} + +void page_frag_cache_drain(struct page_frag_cache *nc) +{ + if (!nc->va) + return; + + __page_frag_cache_drain(virt_to_head_page(nc->va), nc->pagecnt_bias); + nc->va = NULL; +} +EXPORT_SYMBOL(page_frag_cache_drain); + +void __page_frag_cache_drain(struct page *page, unsigned int count) +{ + VM_BUG_ON_PAGE(page_ref_count(page) == 0, page); + + if (page_ref_sub_and_test(page, count)) + free_unref_page(page, compound_order(page)); +} +EXPORT_SYMBOL(__page_frag_cache_drain); + +void *__page_frag_alloc_align(struct page_frag_cache *nc, + unsigned int fragsz, gfp_t gfp_mask, + unsigned int align_mask) +{ + unsigned int size = PAGE_SIZE; + struct page *page; + int offset; + + if (unlikely(!nc->va)) { +refill: + page = __page_frag_cache_refill(nc, gfp_mask); + if (!page) + return NULL; + +#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) + /* if size can vary use size else just use PAGE_SIZE */ + size = nc->size; +#endif + /* Even if we own the page, we do not use atomic_set(). + * This would break get_page_unless_zero() users. + */ + page_ref_add(page, PAGE_FRAG_CACHE_MAX_SIZE); + + /* reset page count bias and offset to start of new frag */ + nc->pfmemalloc = page_is_pfmemalloc(page); + nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; + nc->offset = size; + } + + offset = nc->offset - fragsz; + if (unlikely(offset < 0)) { + page = virt_to_page(nc->va); + + if (!page_ref_sub_and_test(page, nc->pagecnt_bias)) + goto refill; + + if (unlikely(nc->pfmemalloc)) { + free_unref_page(page, compound_order(page)); + goto refill; + } + +#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) + /* if size can vary use size else just use PAGE_SIZE */ + size = nc->size; +#endif + /* OK, page count is 0, we can safely set it */ + set_page_count(page, PAGE_FRAG_CACHE_MAX_SIZE + 1); + + /* reset page count bias and offset to start of new frag */ + nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; + offset = size - fragsz; + if (unlikely(offset < 0)) { + /* + * The caller is trying to allocate a fragment + * with fragsz > PAGE_SIZE but the cache isn't big + * enough to satisfy the request, this may + * happen in low memory conditions. + * We don't release the cache page because + * it could make memory pressure worse + * so we simply return NULL here. + */ + return NULL; + } + } + + nc->pagecnt_bias--; + offset &= align_mask; + nc->offset = offset; + + return nc->va + offset; +} +EXPORT_SYMBOL(__page_frag_alloc_align); + +/* + * Frees a page fragment allocated out of either a compound or order 0 page. + */ +void page_frag_free(void *addr) +{ + struct page *page = virt_to_head_page(addr); + + if (unlikely(put_page_testzero(page))) + free_unref_page(page, compound_order(page)); +} +EXPORT_SYMBOL(page_frag_free); diff --git a/tools/testing/selftests/mm/page_frag/page_frag_test.c b/tools/testing/selftests/mm/page_frag/page_frag_test.c index eeb2b6bc681a..fdf204550c9a 100644 --- a/tools/testing/selftests/mm/page_frag/page_frag_test.c +++ b/tools/testing/selftests/mm/page_frag/page_frag_test.c @@ -6,12 +6,12 @@ * Copyright (C) 2024 Yunsheng Lin <linyunsheng(a)huawei.com> */ -#include <linux/mm.h> #include <linux/module.h> #include <linux/cpumask.h> #include <linux/completion.h> #include <linux/ptr_ring.h> #include <linux/kthread.h> +#include <linux/page_frag_cache.h> static struct ptr_ring ptr_ring; static int nr_objs = 512; -- 2.33.0

1 year, 3 months

1
0
0 0

[RESEND PATCH v4] list: test: Check the size of every lists for list_cut_position*()

by I Hsin Cheng

Check the total number of elements in both resultant lists are correct within list_cut_position*(). Previously, only the first list's size was checked. wo additional elements in the second list would not have been caught. Signed-off-by: I Hsin Cheng <richard120310(a)gmail.com> --- change in v4: Amend the description of commit message, make it less confusing and focus on the correct check which is performed now. lib/list-test.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/lib/list-test.c b/lib/list-test.c index 37cbc33e9fdb..b4b3810c71d0 100644 --- a/lib/list-test.c +++ b/lib/list-test.c @@ -408,6 +408,8 @@ static void list_test_list_cut_position(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, cur, &entries[i]); i++; } + + KUNIT_EXPECT_EQ(test, i, 3); } static void list_test_list_cut_before(struct kunit *test) @@ -436,6 +438,8 @@ static void list_test_list_cut_before(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, cur, &entries[i]); i++; } + + KUNIT_EXPECT_EQ(test, i, 3); } static void list_test_list_splice(struct kunit *test) -- 2.43.0

1 year, 3 months

2
1
0 0

[RESEND PATCH v4] list: test: Check the size of every lists for list_cut_position*()

by I Hsin Cheng

Check the total number of elements in both resultant lists are correct within list_cut_position*(). Previously, only the first list's size was checked. so additional elements in the second list would not have been caught. Signed-off-by: I Hsin Cheng <richard120310(a)gmail.com> --- change in v4: Amend the description of commit message, make it less confusing and focus on the correct check which is performed now. lib/list-test.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/lib/list-test.c b/lib/list-test.c index 37cbc33e9fdb..b4b3810c71d0 100644 --- a/lib/list-test.c +++ b/lib/list-test.c @@ -408,6 +408,8 @@ static void list_test_list_cut_position(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, cur, &entries[i]); i++; } + + KUNIT_EXPECT_EQ(test, i, 3); } static void list_test_list_cut_before(struct kunit *test) @@ -436,6 +438,8 @@ static void list_test_list_cut_before(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, cur, &entries[i]); i++; } + + KUNIT_EXPECT_EQ(test, i, 3); } static void list_test_list_splice(struct kunit *test) -- 2.43.0

1 year, 3 months

1
0
0 0

[PATCH 00/33] riscv control-flow integrity for usermode

by Deepak Gupta

v5 for cpu assisted riscv user mode control flow integrity. zicfiss and zicfilp [1] are ratified riscv CPU extensions. Changes in this version are - rebased on v6.12-rc1 - Fixed schema related issues in device tree file - Fixed some of the documentation related issues in zicfilp/ss.rst (style issues and added index) - added `SHADOW_STACK_SET_MARKER` so that implementation can define base of shadow stack. - Fixed warnings on definitions added in usercfi.h when CONFIG_RISCV_USER_CFI is not selected. - Adopted context header based signal handling as proposed by Andy Chiu - Added support for enabling kernel mode access to shadow stack using FWFT [4] v4 [3] and v3 [2] are earlier versions of patch series. To get more information on kernel interactions with respect to zicfilp and zicfiss, patch series adds documentation for `zicfilp` and `zicfiss` Documentation/arch/riscv/zicfiss.rst Documentation/arch/riscv/zicfilp.rst How to test this series ======================= Toolchain --------- $ git clone git@github.com:sifive/riscv-gnu-toolchain.git -b cfi-dev $ riscv-gnu-toolchain/configure --prefix=<path-to-where-to-build> --with-arch=rv64gc_zicfilp_zicfiss --enable-linux --disable-gdb --with-extra-multilib-test="rv64gc_zicfilp_zicfiss-lp64d:-static" $ make -j$(nproc) Qemu ---- $ git clone git@github.com:deepak0414/qemu.git -b zicfilp_zicfiss_ratified_master_july11 $ cd qemu $ mkdir build $ cd build $ ../configure --target-list=riscv64-softmmu $ make -j$(nproc) Opensbi ------- $ git clone git@github.com:deepak0414/opensbi.git -b v6_cfi_spec_split_opensbi $ make CROSS_COMPILE=<your riscv toolchain> -j$(nproc) PLATFORM=generic Linux ----- Running defconfig is fine. CFI is enabled by default if the toolchain supports it. $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) defconfig $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) Running ------- Modify your qemu command to have: -bios <path-to-cfi-opensbi>/build/platform/generic/firmware/fw_dynamic.bin -cpu rv64,zicfilp=true,zicfiss=true,zimop=true,zcmop=true vDSO related Opens (in the flux) ================================= I am listing these opens for laying out plan and what to expect in future patch sets. And of course for the sake of discussion. Shadow stack and landing pad enabling in vDSO ---------------------------------------------- vDSO must have shadow stack and landing pad support compiled in for task to have shadow stack and landing pad support. This patch series doesn't enable that (yet). Enabling shadow stack support in vDSO should be straight forward (intend to do that in next versions of patch set). Enabling landing pad support in vDSO requires some collaboration with toolchain folks to follow a single label scheme for all object binaries. This is necessary to ensure that all indirect call-sites are setting correct label and target landing pads are decorated with same label scheme. How many vDSOs --------------- Shadow stack instructions are carved out of zimop (may be operations) and if CPU doesn't implement zimop, they're illegal instructions. Kernel could be running on a CPU which may or may not implement zimop. And thus kernel will have to carry 2 different vDSOs and expose the appropriate one depending on whether CPU implements zimop or not. [1] - https://github.com/riscv/riscv-cfi [2] - https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/ [3] - https://lore.kernel.org/all/20240912231650.3740732-1-debug@rivosinc.com/ [4] - https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/src/ext-firmware… --- changelog --------- v4 -- - rebased on 6.11-rc6 - envcfg: Converged with Samuel Holland's patches for envcfg management on per- thread basis. - vma_is_shadow_stack is renamed to is_vma_shadow_stack - picked up Mark Brown's `ARCH_HAS_USER_SHADOW_STACK` patch - signal context: using extended context management to maintain compatibility. - fixed `-Wmissing-prototypes` compiler warnings for prctl functions - Documentation fixes and amending typos. v3 -- envcfg: logic to pick up base envcfg had a bug where `ENVCFG_CBZE` could have been picked on per task basis, even though CPU didn't implement it. Fixed in this series. dt-bindings: As suggested, split into separate commit. fixed the messaging that spec is in public review arch_is_shadow_stack change: arch_is_shadow_stack changed to vma_is_shadow_stack hwprobe: zicfiss / zicfilp if present will get enumerated in hwprobe selftests: As suggested, added object and binary filenames to .gitignore Selftest binary anyways need to be compiled with cfi enabled compiler which will make sure that landing pad and shadow stack are enabled. Thus removed separate enable/disable tests. Cleaned up tests a bit. v2 -- - Using config `CONFIG_RISCV_USER_CFI`, kernel support for riscv control flow integrity for user mode programs can be compiled in the kernel. - Enabling of control flow integrity for user programs is left to user runtime - This patch series introduces arch agnostic `prctls` to enable shadow stack and indirect branch tracking. And implements them on riscv. Signed-off-by: Deepak Gupta <debug(a)rivosinc.com> --- Andy Chiu (1): riscv: signal: abstract header saving for setup_sigcontext Clément Léger (1): riscv: Add Firmware Feature SBI extensions definitions Deepak Gupta (26): mm: helper `is_shadow_stack_vma` to check shadow stack vma riscv/Kconfig: enable HAVE_EXIT_THREAD for riscv riscv: zicfilp / zicfiss in dt-bindings (extensions.yaml) riscv: zicfiss / zicfilp enumeration riscv: zicfiss / zicfilp extension csr and bit definitions riscv: usercfi state for task and save/restore of CSR_SSP on trap entry/exit riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE riscv mm: manufacture shadow stack pte riscv mmu: teach pte_mkwrite to manufacture shadow stack PTEs riscv mmu: write protect and shadow stack riscv/mm: Implement map_shadow_stack() syscall riscv/shstk: If needed allocate a new shadow stack on clone prctl: arch-agnostic prctl for indirect branch tracking riscv: Implements arch agnostic shadow stack prctls riscv: Implements arch agnostic indirect branch tracking prctls riscv/traps: Introduce software check exception riscv signal: save and restore of shadow stack for signal riscv/kernel: update __show_regs to print shadow stack register riscv/ptrace: riscv cfi status and state via ptrace and in core files riscv/hwprobe: zicfilp / zicfiss enumeration in hwprobe riscv: enable kernel access to shadow stack memory via FWFT sbi call riscv: kernel command line option to opt out of user cfi riscv: create a config for shadow stack and landing pad instr support riscv: Documentation for landing pad / indirect branch tracking riscv: Documentation for shadow stack on riscv kselftest/riscv: kselftest for user mode cfi Mark Brown (2): mm: Introduce ARCH_HAS_USER_SHADOW_STACK prctl: arch-agnostic prctl for shadow stack Samuel Holland (3): riscv: Enable cbo.zero only when all harts support Zicboz riscv: Add support for per-thread envcfg CSR values riscv: Call riscv_user_isa_enable() only on the boot hart Documentation/arch/riscv/index.rst | 2 + Documentation/arch/riscv/zicfilp.rst | 115 +++++ Documentation/arch/riscv/zicfiss.rst | 176 +++++++ .../devicetree/bindings/riscv/extensions.yaml | 14 + arch/riscv/Kconfig | 20 + arch/riscv/include/asm/asm-prototypes.h | 1 + arch/riscv/include/asm/cpufeature.h | 15 +- arch/riscv/include/asm/csr.h | 16 + arch/riscv/include/asm/entry-common.h | 2 + arch/riscv/include/asm/hwcap.h | 2 + arch/riscv/include/asm/mman.h | 24 + arch/riscv/include/asm/pgtable.h | 30 +- arch/riscv/include/asm/processor.h | 2 + arch/riscv/include/asm/sbi.h | 27 ++ arch/riscv/include/asm/switch_to.h | 8 + arch/riscv/include/asm/thread_info.h | 4 + arch/riscv/include/asm/usercfi.h | 89 ++++ arch/riscv/include/uapi/asm/hwprobe.h | 2 + arch/riscv/include/uapi/asm/ptrace.h | 22 + arch/riscv/include/uapi/asm/sigcontext.h | 1 + arch/riscv/kernel/Makefile | 2 + arch/riscv/kernel/asm-offsets.c | 8 + arch/riscv/kernel/cpufeature.c | 13 +- arch/riscv/kernel/entry.S | 31 +- arch/riscv/kernel/head.S | 12 + arch/riscv/kernel/process.c | 31 +- arch/riscv/kernel/ptrace.c | 83 ++++ arch/riscv/kernel/signal.c | 140 +++++- arch/riscv/kernel/smpboot.c | 2 - arch/riscv/kernel/suspend.c | 4 +- arch/riscv/kernel/sys_hwprobe.c | 2 + arch/riscv/kernel/sys_riscv.c | 10 + arch/riscv/kernel/traps.c | 42 ++ arch/riscv/kernel/usercfi.c | 526 +++++++++++++++++++++ arch/riscv/mm/init.c | 2 +- arch/riscv/mm/pgtable.c | 17 + arch/x86/Kconfig | 1 + fs/proc/task_mmu.c | 2 +- include/linux/cpu.h | 4 + include/linux/mm.h | 5 +- include/uapi/asm-generic/mman.h | 4 + include/uapi/linux/elf.h | 1 + include/uapi/linux/prctl.h | 48 ++ kernel/sys.c | 60 +++ mm/Kconfig | 6 + mm/gup.c | 2 +- mm/mmap.c | 1 + mm/vma.h | 10 +- tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/cfi/.gitignore | 3 + tools/testing/selftests/riscv/cfi/Makefile | 10 + tools/testing/selftests/riscv/cfi/cfi_rv_test.h | 83 ++++ tools/testing/selftests/riscv/cfi/riscv_cfi_test.c | 82 ++++ tools/testing/selftests/riscv/cfi/shadowstack.c | 362 ++++++++++++++ tools/testing/selftests/riscv/cfi/shadowstack.h | 37 ++ 55 files changed, 2178 insertions(+), 42 deletions(-) --- base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc change-id: 20240930-v5_user_cfi_series-3dc332f8f5b2 -- - debug

1 year, 3 months

7
48
0 0

[PATCH] selftests: vDSO: fix compile error for vdso_test_getrandom

by Yu Liao

When building selftests/vDSO: $ make -C tools/testing/selftests TARGETS=vDSO I hit the following compilation error: vdso_test_getrandom.c:260:17: error: 'CLONE_NEWTIME' undeclared (first use in this function); did you mean 'CLONE_NEWIPC'? 260 | assert(unshare(CLONE_NEWTIME) == 0); | ^~~~~~~~~~~~~ CLONE_NEWTIME is defined in linux/sched.h, so fix this by including <linux/sched.h>. Fixes: 2aec90036dcd ("selftests: vDSO: ensure vgetrandom works in a time namespace") Signed-off-by: Yu Liao <liaoyu15(a)huawei.com> --- tools/testing/selftests/vDSO/vdso_test_getrandom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/vDSO/vdso_test_getrandom.c b/tools/testing/selftests/vDSO/vdso_test_getrandom.c index 72a1d9b43a84..84f2bbb2d5e0 100644 --- a/tools/testing/selftests/vDSO/vdso_test_getrandom.c +++ b/tools/testing/selftests/vDSO/vdso_test_getrandom.c @@ -19,6 +19,7 @@ #include <sys/ptrace.h> #include <sys/wait.h> #include <sys/types.h> +#include <linux/sched.h> #include <linux/random.h> #include <linux/compiler.h> #include <linux/ptrace.h> -- 2.33.0

1 year, 3 months

4
8
0 0

[PATCH] selftests/bpf: Add __init and __exit to the functions bpf_test_no_cfi_init()/bpf_test_no_cfi_exit()

by Yaxiong Tian

From: Yaxiong Tian <iambestgod(a)outlook.com> To save some running memory,Add __init and __exit to the module load/unload functions. Signed-off-by: Yaxiong Tian <tianyaxiong(a)kylinos.cn> --- tools/testing/selftests/bpf/bpf_test_no_cfi/bpf_test_no_cfi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/bpf_test_no_cfi/bpf_test_no_cfi.c b/tools/testing/selftests/bpf/bpf_test_no_cfi/bpf_test_no_cfi.c index 948eb3962732..aa571ab3c6c6 100644 --- a/tools/testing/selftests/bpf/bpf_test_no_cfi/bpf_test_no_cfi.c +++ b/tools/testing/selftests/bpf/bpf_test_no_cfi/bpf_test_no_cfi.c @@ -56,7 +56,7 @@ static struct bpf_struct_ops test_no_cif_ops = { .owner = THIS_MODULE, }; -static int bpf_test_no_cfi_init(void) +static int __init bpf_test_no_cfi_init(void) { int ret; @@ -71,7 +71,7 @@ static int bpf_test_no_cfi_init(void) return ret; } -static void bpf_test_no_cfi_exit(void) +static void __exit bpf_test_no_cfi_exit(void) { } -- 2.34.1

1 year, 3 months

2
2
0 0

[PATCH v2] selftests: sched_ext: Add sched_ext as proper selftest target

by Björn Töpel

From: Björn Töpel <bjorn(a)rivosinc.com> The sched_ext selftests is missing proper cross-compilation support, a proper target entry, and out-of-tree build support. When building the kselftest suite, e.g.: make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \ SKIP_TARGETS="" O=/output/foo -C tools/testing/selftests install The expectation is that the sched_ext is included, cross-built, and placed into /output/foo. Add CROSS_COMPILE, OUTPUT, and TARGETS support to the sched_ext selftest. Also, remove some variables that were unused by the Makefile. Signed-off-by: Björn Töpel <bjorn(a)rivosinc.com> --- v2: * Removed the duplicated LLVM prefix parsing (David) * Made sure make clean didn't do a complete mess (David) * Added sched_ext to default skip (Shuah) --- tools/testing/selftests/Makefile | 9 +-- tools/testing/selftests/sched_ext/Makefile | 80 +++++++++++----------- 2 files changed, 45 insertions(+), 44 deletions(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index b38199965f99..363d031a16f7 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -88,6 +88,7 @@ TARGETS += rlimits TARGETS += rseq TARGETS += rtc TARGETS += rust +TARGETS += sched_ext TARGETS += seccomp TARGETS += sgx TARGETS += sigaltstack @@ -129,10 +130,10 @@ ifeq ($(filter net/lib,$(TARGETS)),) endif endif -# User can optionally provide a TARGETS skiplist. By default we skip -# BPF since it has cutting edge build time dependencies which require -# more effort to install. -SKIP_TARGETS ?= bpf +# User can optionally provide a TARGETS skiplist. By default we skip +# targets using BPF since it has cutting edge build time dependencies +# which require more effort to install. +SKIP_TARGETS ?= bpf sched_ext ifneq ($(SKIP_TARGETS),) TMP := $(filter-out $(SKIP_TARGETS), $(TARGETS)) override TARGETS := $(TMP) diff --git a/tools/testing/selftests/sched_ext/Makefile b/tools/testing/selftests/sched_ext/Makefile index 0754a2c110a1..acab9732b23e 100644 --- a/tools/testing/selftests/sched_ext/Makefile +++ b/tools/testing/selftests/sched_ext/Makefile @@ -3,24 +3,13 @@ include ../../../build/Build.include include ../../../scripts/Makefile.arch include ../../../scripts/Makefile.include + +TEST_GEN_PROGS := runner + +# override lib.mk's default rules +OVERRIDE_TARGETS := 1 include ../lib.mk -ifneq ($(LLVM),) -ifneq ($(filter %/,$(LLVM)),) -LLVM_PREFIX := $(LLVM) -else ifneq ($(filter -%,$(LLVM)),) -LLVM_SUFFIX := $(LLVM) -endif - -CC := $(LLVM_PREFIX)clang$(LLVM_SUFFIX) $(CLANG_FLAGS) -fintegrated-as -else -CC := gcc -endif # LLVM - -ifneq ($(CROSS_COMPILE),) -$(error CROSS_COMPILE not supported for scx selftests) -endif # CROSS_COMPILE - CURDIR := $(abspath .) REPOROOT := $(abspath ../../../..) TOOLSDIR := $(REPOROOT)/tools @@ -34,18 +23,31 @@ GENHDR := $(GENDIR)/autoconf.h SCXTOOLSDIR := $(TOOLSDIR)/sched_ext SCXTOOLSINCDIR := $(TOOLSDIR)/sched_ext/include -OUTPUT_DIR := $(CURDIR)/build +OUTPUT_DIR := $(OUTPUT)/build OBJ_DIR := $(OUTPUT_DIR)/obj INCLUDE_DIR := $(OUTPUT_DIR)/include BPFOBJ_DIR := $(OBJ_DIR)/libbpf SCXOBJ_DIR := $(OBJ_DIR)/sched_ext BPFOBJ := $(BPFOBJ_DIR)/libbpf.a LIBBPF_OUTPUT := $(OBJ_DIR)/libbpf/libbpf.a -DEFAULT_BPFTOOL := $(OUTPUT_DIR)/sbin/bpftool -HOST_BUILD_DIR := $(OBJ_DIR) -HOST_OUTPUT_DIR := $(OUTPUT_DIR) -VMLINUX_BTF_PATHS ?= ../../../../vmlinux \ +ifneq ($(CROSS_COMPILE),) +DEFAULT_BPFTOOL := $(OUTPUT_DIR)/host/sbin/bpftool +HOST_OBJ_DIR := $(OBJ_DIR)/host/bpftool +HOST_LIBBPF_OUTPUT := $(OBJ_DIR)/host/libbpf/ +HOST_LIBBPF_DESTDIR := $(OUTPUT_DIR)/host/ +HOST_DESTDIR := $(OUTPUT_DIR)/host/ +else +DEFAULT_BPFTOOL := $(OUTPUT_DIR)/sbin/bpftool +HOST_OBJ_DIR := $(OBJ_DIR)/bpftool +HOST_LIBBPF_OUTPUT := $(OBJ_DIR)/libbpf/ +HOST_LIBBPF_DESTDIR := $(OUTPUT_DIR)/ +HOST_DESTDIR := $(OUTPUT_DIR)/ +endif + +VMLINUX_BTF_PATHS ?= $(if $(O),$(O)/vmlinux) \ + $(if $(KBUILD_OUTPUT),$(KBUILD_OUTPUT)/vmlinux) \ + ../../../../vmlinux \ /sys/kernel/btf/vmlinux \ /boot/vmlinux-$(shell uname -r) VMLINUX_BTF ?= $(abspath $(firstword $(wildcard $(VMLINUX_BTF_PATHS)))) @@ -80,17 +82,23 @@ IS_LITTLE_ENDIAN = $(shell $(CC) -dM -E - </dev/null | \ # Use '-idirafter': Don't interfere with include mechanics except where the # build would have failed anyways. define get_sys_includes -$(shell $(1) -v -E - </dev/null 2>&1 \ +$(shell $(1) $(2) -v -E - </dev/null 2>&1 \ | sed -n '/<...> search starts here:/,/End of search list./{ s| $/.*$|-idirafter \1|p }') \ -$(shell $(1) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}') +$(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}') endef +ifneq ($(CROSS_COMPILE),) +CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%)) +endif + +CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH)) + BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) \ $(if $(IS_LITTLE_ENDIAN),-mlittle-endian,-mbig-endian) \ -I$(CURDIR)/include -I$(CURDIR)/include/bpf-compat \ -I$(INCLUDE_DIR) -I$(APIDIR) -I$(SCXTOOLSINCDIR) \ -I$(REPOROOT)/include \ - $(call get_sys_includes,$(CLANG)) \ + $(CLANG_SYS_INCLUDES) \ -Wall -Wno-compare-distinct-pointer-types \ -Wno-incompatible-function-pointer-types \ -O2 -mcpu=v3 @@ -98,7 +106,7 @@ BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) \ # sort removes libbpf duplicates when not cross-building MAKE_DIRS := $(sort $(OBJ_DIR)/libbpf $(OBJ_DIR)/libbpf \ $(OBJ_DIR)/bpftool $(OBJ_DIR)/resolve_btfids \ - $(INCLUDE_DIR) $(SCXOBJ_DIR)) + $(HOST_OBJ_DIR) $(INCLUDE_DIR) $(SCXOBJ_DIR)) $(MAKE_DIRS): $(call msg,MKDIR,,$@) @@ -112,14 +120,14 @@ $(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ DESTDIR=$(OUTPUT_DIR) prefix= all install_headers $(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile) \ - $(LIBBPF_OUTPUT) | $(OBJ_DIR)/bpftool + $(LIBBPF_OUTPUT) | $(HOST_OBJ_DIR) $(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \ ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) \ EXTRA_CFLAGS='-g -O0' \ - OUTPUT=$(OBJ_DIR)/bpftool/ \ - LIBBPF_OUTPUT=$(OBJ_DIR)/libbpf/ \ - LIBBPF_DESTDIR=$(OUTPUT_DIR)/ \ - prefix= DESTDIR=$(OUTPUT_DIR)/ install-bin + OUTPUT=$(HOST_OBJ_DIR)/ \ + LIBBPF_OUTPUT=$(HOST_LIBBPF_OUTPUT) \ + LIBBPF_DESTDIR=$(HOST_LIBBPF_DESTDIR) \ + prefix= DESTDIR=$(HOST_DESTDIR) install-bin $(INCLUDE_DIR)/vmlinux.h: $(VMLINUX_BTF) $(BPFTOOL) | $(INCLUDE_DIR) ifeq ($(VMLINUX_H),) @@ -150,9 +158,7 @@ $(INCLUDE_DIR)/%.bpf.skel.h: $(SCXOBJ_DIR)/%.bpf.o $(INCLUDE_DIR)/vmlinux.h $(BP override define CLEAN rm -rf $(OUTPUT_DIR) - rm -f *.o *.bpf.o *.bpf.skel.h *.bpf.subskel.h rm -f $(TEST_GEN_PROGS) - rm -f runner endef # Every testcase takes all of the BPF progs are dependencies by default. This @@ -196,21 +202,15 @@ $(SCXOBJ_DIR)/runner.o: runner.c | $(SCXOBJ_DIR) # function doesn't support using implicit rules otherwise. $(testcase-targets): $(SCXOBJ_DIR)/%.o: %.c $(SCXOBJ_DIR)/runner.o $(all_test_bpfprogs) | $(SCXOBJ_DIR) $(eval test=$(patsubst %.o,%.c,$(notdir $@))) - $(CC) $(CFLAGS) -c $< -o $@ $(SCXOBJ_DIR)/runner.o + $(CC) $(CFLAGS) -c $< -o $@ $(SCXOBJ_DIR)/util.o: util.c | $(SCXOBJ_DIR) $(CC) $(CFLAGS) -c $< -o $@ -runner: $(SCXOBJ_DIR)/runner.o $(SCXOBJ_DIR)/util.o $(BPFOBJ) $(testcase-targets) +$(OUTPUT)/runner: $(SCXOBJ_DIR)/runner.o $(SCXOBJ_DIR)/util.o $(BPFOBJ) $(testcase-targets) @echo "$(testcase-targets)" $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) -TEST_GEN_PROGS := runner - -all: runner - -.PHONY: all clean help - .DEFAULT_GOAL := all .DELETE_ON_ERROR: base-commit: 8cf0b93919e13d1e8d4466eb4080a4c4d9d66d7b -- 2.43.0

1 year, 3 months

2
7
0 0

[PATCH v4] Kunit to check the longest symbol length

by Sergio González Collado

The longest length of a symbol (KSYM_NAME_LEN) was increased to 512 in the reference [1]. This patch adds a kunit test to check the longest symbol length. This test can also help other efforts for longer symbol lenght, like [2]. [1] https://lore.kernel.org/lkml/20220802015052.10452-6-ojeda@kernel.org/ [2] https://lore.kernel.org/lkml/20240605032120.3179157-1-song@kernel.org/ Tested-by: Martin Rodriguez Reboredo <yakoyoku(a)gmail.com> Signed-off-by: Sergio González Collado <sergio.collado(a)gmail.com> --- V1 -> V2: corrected CI tests. Added fix proposed at [3] [3] https://lore.kernel.org/lkml/Y9ES4UKl%2F+DtvAVS@gmail.com/T/#m3ef0e12bb834d… --- V2 -> V3: updated base and added MODULE_DESCRIPTION() and MODULE_AUTHOR() --- V3 -> V4: add x86 mantainers, add new reference. --- arch/x86/tools/insn_decoder_test.c | 3 +- lib/Kconfig.debug | 9 +++ lib/Makefile | 2 + lib/longest_symbol_kunit.c | 124 +++++++++++++++++++++++++++++ 4 files changed, 137 insertions(+), 1 deletion(-) create mode 100644 lib/longest_symbol_kunit.c diff --git a/arch/x86/tools/insn_decoder_test.c b/arch/x86/tools/insn_decoder_test.c index 472540aeabc2..3bde35ea4188 100644 --- a/arch/x86/tools/insn_decoder_test.c +++ b/arch/x86/tools/insn_decoder_test.c @@ -10,6 +10,7 @@ #include <assert.h> #include <unistd.h> #include <stdarg.h> +#include <linux/kallsysms.h> #define unlikely(cond) (cond) @@ -106,7 +107,7 @@ static void parse_args(int argc, char **argv) } } -#define BUFSIZE 256 +#define BUFSIZE (256 + KSYM_NAME_LEN) int main(int argc, char **argv) { diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index bc8faa4509e1..09015e7e07f3 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2805,6 +2805,15 @@ config FORTIFY_KUNIT_TEST by the str*() and mem*() family of functions. For testing runtime traps of FORTIFY_SOURCE, see LKDTM's "FORTIFY_*" tests. +config LONGEST_SYM_KUNIT_TEST + tristate "Test the longest symbol possible" if !KUNIT_ALL_TESTS + depends on KUNIT && KPROBES + default KUNIT_ALL_TESTS + help + Tests the longest symbol possible + + If unsure, say N. + config HW_BREAKPOINT_KUNIT_TEST bool "Test hw_breakpoint constraints accounting" if !KUNIT_ALL_TESTS depends on HAVE_HW_BREAKPOINT diff --git a/lib/Makefile b/lib/Makefile index 773adf88af41..fc878e716825 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -389,6 +389,8 @@ CFLAGS_fortify_kunit.o += $(DISABLE_STRUCTLEAK_PLUGIN) obj-$(CONFIG_FORTIFY_KUNIT_TEST) += fortify_kunit.o obj-$(CONFIG_SIPHASH_KUNIT_TEST) += siphash_kunit.o obj-$(CONFIG_USERCOPY_KUNIT_TEST) += usercopy_kunit.o +obj-$(CONFIG_LONGEST_SYM_KUNIT_TEST) += longest_symbol_kunit.o +CFLAGS_longest_symbol_kunit.o += $(call cc-disable-warning, missing-prototypes) obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o diff --git a/lib/longest_symbol_kunit.c b/lib/longest_symbol_kunit.c new file mode 100644 index 000000000000..557ad6eae56c --- /dev/null +++ b/lib/longest_symbol_kunit.c @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Test the longest symbol length. Execute with: + * ./tools/testing/kunit/kunit.py run longest-symbol + * --arch=x86_64 --kconfig_add CONFIG_KPROBES=y --kconfig_add CONFIG_MODULES=y + * --kconfig_add CONFIG_RETPOLINE=n + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <kunit/test.h> +#include <linux/stringify.h> +#include <linux/kprobes.h> +#include <linux/kallsyms.h> + +#define DI(name) s##name##name +#define DDI(name) DI(n##name##name) +#define DDDI(name) DDI(n##name##name) +#define DDDDI(name) DDDI(n##name##name) +#define DDDDDI(name) DDDDI(n##name##name) + +#define PLUS1(name) __PASTE(name, e) + +/*Generate a symbol whose name length is 511 */ +#define LONGEST_SYM_NAME DDDDDI(g1h2i3j4k5l6m7n) + +/*Generate a symbol whose name length is 512 */ +#define LONGEST_SYM_NAME_PLUS1 PLUS1(LONGEST_SYM_NAME) + +#define RETURN_LONGEST_SYM 0xAAAAA +#define RETURN_LONGEST_SYM_PLUS1 0x55555 + +noinline int LONGEST_SYM_NAME(void); +noinline int LONGEST_SYM_NAME(void) +{ + return RETURN_LONGEST_SYM; +} + +noinline int LONGEST_SYM_NAME_PLUS1(void); +noinline int LONGEST_SYM_NAME_PLUS1(void) +{ + return RETURN_LONGEST_SYM_PLUS1; +} + +_Static_assert(sizeof(__stringify(LONGEST_SYM_NAME)) == KSYM_NAME_LEN, +"Incorrect symbol length found. Expected KSYM_NAME_LEN: " +__stringify(KSYM_NAME) ", but found: " +__stringify(sizeof(LONGEST_SYM_NAME))); + +static void test_longest_symbol(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, RETURN_LONGEST_SYM, LONGEST_SYM_NAME()); +}; + +static void test_longest_symbol_kallsyms(struct kunit *test) +{ + unsigned long (*kallsyms_lookup_name)(const char *name); + static int (*longest_sym)(void); + + struct kprobe kp = { + .symbol_name = "kallsyms_lookup_name", + }; + + if (register_kprobe(&kp) < 0) { + pr_info("%s: kprobe not registered\n", __func__); + KUNIT_FAIL(test, "test_longest_symbol kallsysms: kprobe not registered\n"); + return; + } + + kunit_warn(test, "test_longest_symbol kallsyms: kprobe registered\n"); + kallsyms_lookup_name = (unsigned long (*)(const char *name))kp.addr; + unregister_kprobe(&kp); + + longest_sym = + (void *) kallsyms_lookup_name(__stringify(LONGEST_SYM_NAME)); + KUNIT_EXPECT_EQ(test, RETURN_LONGEST_SYM, longest_sym()); +}; + +static void test_longest_symbol_plus1(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, RETURN_LONGEST_SYM_PLUS1, LONGEST_SYM_NAME_PLUS1()); +}; + +static void test_longest_symbol_plus1_kallsyms(struct kunit *test) +{ + unsigned long (*kallsyms_lookup_name)(const char *name); + static int (*longest_sym_plus1)(void); + + struct kprobe kp = { + .symbol_name = "kallsyms_lookup_name", + }; + + if (register_kprobe(&kp) < 0) { + pr_info("%s: kprobe not registered\n", __func__); + KUNIT_FAIL(test, "test_longest_symbol kallsysms: kprobe not registered\n"); + return; + } + + kunit_warn(test, "test_longest_symbol_plus1 kallsyms: kprobe registered\n"); + kallsyms_lookup_name = (unsigned long (*)(const char *name))kp.addr; + unregister_kprobe(&kp); + + longest_sym_plus1 = + (void *) kallsyms_lookup_name(__stringify(LONGEST_SYM_NAME_PLUS1)); + KUNIT_EXPECT_NULL(test, longest_sym_plus1); +}; + +static struct kunit_case longest_symbol_test_cases[] = { + KUNIT_CASE(test_longest_symbol), + KUNIT_CASE(test_longest_symbol_kallsyms), + KUNIT_CASE(test_longest_symbol_plus1), + KUNIT_CASE(test_longest_symbol_plus1_kallsyms), + {} +}; + +static struct kunit_suite longest_symbol_test_suite = { + .name = "longest-symbol", + .test_cases = longest_symbol_test_cases, +}; +kunit_test_suite(longest_symbol_test_suite); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Test the longest symbol length"); +MODULE_AUTHOR("Sergio González Collado"); base-commit: abf2050f51fdca0fd146388f83cddd95a57a008d -- 2.39.2

1 year, 3 months

2
1
0 0

[RESEND PATCH v3] list: test: Mending tests for list_cut_position()

by I Hsin Cheng

Mending test for list_cut_position*() for the missing check of integer "i" after the second loop. The variable should be checked for second time to make sure both lists after the cut operation are formed as expected. Signed-off-by: I Hsin Cheng <richard120310(a)gmail.com> --- lib/list-test.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/lib/list-test.c b/lib/list-test.c index 37cbc33e9fdb..b4b3810c71d0 100644 --- a/lib/list-test.c +++ b/lib/list-test.c @@ -408,6 +408,8 @@ static void list_test_list_cut_position(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, cur, &entries[i]); i++; } + + KUNIT_EXPECT_EQ(test, i, 3); } static void list_test_list_cut_before(struct kunit *test) @@ -436,6 +438,8 @@ static void list_test_list_cut_before(struct kunit *test) KUNIT_EXPECT_PTR_EQ(test, cur, &entries[i]); i++; } + + KUNIT_EXPECT_EQ(test, i, 3); } static void list_test_list_splice(struct kunit *test) -- 2.43.0

1 year, 3 months

3
3
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror