- Linux-kselftest-mirror - lists.linaro.org

[PATCH v9 0/7] Centralize and unify usage of preempt/irq

by Joel Fernandes

From: "Joel Fernandes (Google)" <joel(a)joelfernandes.org> This is the next (hopefully close to final) revision of preempt/irq tracepoint centralization and unified usage across the kernel. This revision mostly has minor style corrections, reviewed-by tag additions and an improvement to the test module. All patches now have a Reviewed-by tag except for the kselftest script (patch 7/7). I have also now split out the softirq fix which really should go into an -rc cycle and is independent of this series (see [1]). The preempt/irq tracepoints exist but not everything in the kernel is using it whenever they need to be notified that a preempt disable/enable or an irq disable enable has occurred. This makes things not work simultaneously (for example, only either lockdep or irqsoff trace-events can be used at a time). This is particular painful to deal with, since turning on lockdep breaks tracers that install probes on IRQ events, such as the BCC atomic critical section tracer [2]. This constraint also makes it not possible to use synthetic events to trace irqsoff sections with lockdep simulataneously turned on. This series solves that, and also results in a nice clean up of relevant parts of the kernel. Several ifdefs are simpler, and the design is more unified and better. Also as a result of this, we also speeded performance all rcuidle tracepoints since their handling is simpler. [1] https://lkml.org/lkml/2018/6/7/1135 [2] https://github.com/iovisor/bcc/pull/1801/ v8->v9: - Small style changes to tracepoint code (Mathieu) - Minor style fix to use PTR_ERR_OR_ZERO (0-day bot) - Minor fix to test_atomic_sections to use unsigned long. - Added Namhyung's, Mathieu's Reviewed-by to some patches. v7->v8: - Refactored irqsoff tracer probe defines (Namhyung) v6->v7: - Added a module to simulate an atomic section, a kselftest to load and and trigger it which verifies the preempt-tracer and this series. - Fixed a new warning after I rebased in early boot, this is because early_boot_irqs_disabled was set too early, I moved it after the lockdep initialization. - added back the softirq fix since it appears it wasn't picked up. - Ran Ingo's locking API selftest suite which are passing with this series. - Mathieu suggested ifdef'ing the tracepoint_synchronize_unregister function incase tracepoints aren't enabled, did that. Joel Fernandes (Google) (6): srcu: Add notrace variant of srcu_dereference trace/irqsoff: Split reset into separate functions tracepoint: Make rcuidle tracepoint callers use SRCU tracing: Centralize preemptirq tracepoints and unify their usage lib: Add module to simulate atomic sections for testing preemptoff tracers kselftests: Add tests for the preemptoff and irqsoff tracers Paul McKenney (1): srcu: Add notrace variants of srcu_read_{lock,unlock} include/linux/ftrace.h | 11 +- include/linux/irqflags.h | 11 +- include/linux/lockdep.h | 8 +- include/linux/preempt.h | 2 +- include/linux/srcu.h | 22 ++ include/linux/tracepoint.h | 49 +++- include/trace/events/preemptirq.h | 23 +- init/main.c | 5 +- kernel/locking/lockdep.c | 35 +-- kernel/sched/core.c | 2 +- kernel/trace/Kconfig | 22 +- kernel/trace/Makefile | 2 +- kernel/trace/trace_irqsoff.c | 253 ++++++------------ kernel/trace/trace_preemptirq.c | 71 +++++ kernel/tracepoint.c | 16 +- lib/Kconfig.debug | 8 + lib/Makefile | 1 + lib/test_atomic_sections.c | 77 ++++++ tools/testing/selftests/ftrace/config | 3 + .../test.d/preemptirq/irqsoff_tracer.tc | 74 +++++ 20 files changed, 454 insertions(+), 241 deletions(-) create mode 100644 kernel/trace/trace_preemptirq.c create mode 100644 lib/test_atomic_sections.c create mode 100644 tools/testing/selftests/ftrace/test.d/preemptirq/irqsoff_tracer.tc -- 2.17.1.1185.g55be947832-goog -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 6 months

1
7
0 0

[PATCH] kselftest/cgroup: fix a signedness bug

by Dan Carpenter

"len" needs to be signed for the error handling to work. Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> diff --git a/tools/testing/selftests/cgroup/cgroup_util.c b/tools/testing/selftests/cgroup/cgroup_util.c index b69bdeb4b9fe..1e9e3c470561 100644 --- a/tools/testing/selftests/cgroup/cgroup_util.c +++ b/tools/testing/selftests/cgroup/cgroup_util.c @@ -35,7 +35,7 @@ static ssize_t read_text(const char *path, char *buf, size_t max_len) return len; } -static ssize_t write_text(const char *path, char *buf, size_t len) +static ssize_t write_text(const char *path, char *buf, ssize_t len) { int fd; @@ -140,7 +140,7 @@ long cg_read_key_long(const char *cgroup, const char *control, const char *key) int cg_write(const char *cgroup, const char *control, char *buf) { char path[PATH_MAX]; - size_t len = strlen(buf); + ssize_t len = strlen(buf); snprintf(path, sizeof(path), "%s/%s", cgroup, control); -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 6 months

3
2
0 0

[PATCH v8 0/8] Centralize and unify usage of preempt/irq tracepoints

by Joel Fernandes

From: "Joel Fernandes (Google)" <joel(a)joelfernandes.org> The preempt/irq tracepoints exist but not everything in the kernel is using it during preempt/irq on/off events. This makes things not work simultaneously (for ex, only either lockdep or irqsoff events can be used at a time). This series is an attempt to solve that, and also results in a nice clean up of the kernel in general. Several ifdefs are simpler, and the design is more unified and better. Also as a result of this, we also speeded up performance all rcuidle tracepoints since their handling is simpler. v7->v8: - Refactored irqsoff tracer probe defines based on Namhyung's suggestions. No functional change. v6->v7: - Added a module to simulate an atomic section, a kselftest to load and and trigger it which verifies the preempt-tracer and this series. - Fixed a new warning after I rebased in early boot, this is because early_boot_irqs_disabled was set too early, I moved it after the lockdep initialization. - added back the softirq fix since it appears it wasn't picked up. - Ran Ingo's locking API selftest suite which are passing with this series. - Mathieu suggested ifdef'ing the tracepoint_synchronize_unregister function incase tracepoints aren't enabled, did that. Joel Fernandes (Google) (7): softirq: reorder trace_softirqs_on to prevent lockdep splat srcu: Add notrace variant of srcu_dereference trace/irqsoff: Split reset into separate functions tracepoint: Make rcuidle tracepoint callers use SRCU tracing: Centralize preemptirq tracepoints and unify their usage lib: Add module to simulate atomic sections for testing preemptoff tracers kselftests: Add tests for the preemptoff and irqsoff tracers Paul McKenney (1): srcu: Add notrace variants of srcu_read_{lock,unlock} include/linux/ftrace.h | 11 +- include/linux/irqflags.h | 11 +- include/linux/lockdep.h | 8 +- include/linux/preempt.h | 2 +- include/linux/srcu.h | 22 ++ include/linux/tracepoint.h | 48 +++- include/trace/events/preemptirq.h | 23 +- init/main.c | 5 +- kernel/locking/lockdep.c | 35 +-- kernel/sched/core.c | 2 +- kernel/softirq.c | 6 +- kernel/trace/Kconfig | 22 +- kernel/trace/Makefile | 2 +- kernel/trace/trace_irqsoff.c | 253 ++++++------------ kernel/trace/trace_preemptirq.c | 71 +++++ kernel/tracepoint.c | 15 +- lib/Kconfig.debug | 8 + lib/Makefile | 1 + lib/test_atomic_sections.c | 79 ++++++ tools/testing/selftests/ftrace/config | 3 + .../test.d/preemptirq/irqsoff_tracer.tc | 74 +++++ 21 files changed, 459 insertions(+), 242 deletions(-) create mode 100644 kernel/trace/trace_preemptirq.c create mode 100644 lib/test_atomic_sections.c create mode 100644 tools/testing/selftests/ftrace/test.d/preemptirq/irqsoff_tracer.tc -- 2.17.0.921.gf22659ad46-goog -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 6 months

7
19
0 0

[PATCH v6 0/2] sparc64: Add privileged ADI driver

by Tom Hromatka

ADI is a feature supported on SPARC M7 and newer processors to allow hardware to catch rogue accesses to memory. ADI is supported for data fetches only and not instruction fetches. An app can enable ADI on its data pages, set version tags on them and use versioned addresses to access the data pages. Upper bits of the address contain the version tag. On M7 processors, upper four bits (bits 63-60) contain the version tag. If a rogue app attempts to access ADI enabled data pages, its access is blocked and processor generates an exception. Please see Documentation/sparc/adi.txt for further details. This patchset implements a char driver to read/write ADI versions from privileged user space processes. Intended consumers are makedumpfile and crash. v6: * Addressed a few action items from greg k-h * Added Reviewed-by Greg Kroah-Hartman and Shuah Khan v5: * Fixed MODULE_LICENSE() for adi.c v4: * Fixed messed up subject lines. v3: * Really fixed the copyright headers to use SPDX GPL v2. Really. v2: * Simplified copyright headers * Completely reworked sparc64 selftests Makefiles. Used the android selftests Makefiles as an example * Added run.sh and drivers_test.sh to the sparc64 selftest directory. Used bpf/test_kmod.sh and the android selftests as examples * Minor cleanups in the selftest adi-test.c * Added calls to ksft_test_*() in the adi-test.c Tom Hromatka (2): char: sparc64: Add privileged ADI driver selftests: sparc64: char: Selftest for privileged ADI driver drivers/char/Kconfig | 12 + drivers/char/Makefile | 1 + drivers/char/adi.c | 239 +++++++ tools/testing/selftests/Makefile | 1 + tools/testing/selftests/sparc64/Makefile | 46 ++ tools/testing/selftests/sparc64/drivers/.gitignore | 1 + tools/testing/selftests/sparc64/drivers/Makefile | 15 + tools/testing/selftests/sparc64/drivers/adi-test.c | 721 +++++++++++++++++++++ .../selftests/sparc64/drivers/drivers_test.sh | 30 + tools/testing/selftests/sparc64/run.sh | 3 + 10 files changed, 1069 insertions(+) create mode 100644 drivers/char/adi.c create mode 100644 tools/testing/selftests/sparc64/Makefile create mode 100644 tools/testing/selftests/sparc64/drivers/.gitignore create mode 100644 tools/testing/selftests/sparc64/drivers/Makefile create mode 100644 tools/testing/selftests/sparc64/drivers/adi-test.c create mode 100755 tools/testing/selftests/sparc64/drivers/drivers_test.sh create mode 100755 tools/testing/selftests/sparc64/run.sh -- 2.15.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 6 months

2
3
0 0

[PATCH net-next] selftests: forwarding: Fix importing dependent libraries

by Petr Machata

When libraries are sourced from elsewhere from the tree, such as the testing/selftests/drivers/net/mlxsw subdirectory, sourcing their own dependencies directly by name doesn't work. Thus running mirror_gre.sh from that subdirectory results in the following cascade of errors: ./../../../net/forwarding/mirror_gre_lib.sh: line 3: mirror_lib.sh: No such file or directory ./../../../net/forwarding/mirror_gre_topo_lib.sh: line 36: mirror_topo_lib.sh: No such file or directory ./../../../net/forwarding/mirror_gre_topo_lib.sh: line 80: mirror_topo_h1_create: command not found ./../../../net/forwarding/mirror_gre_topo_lib.sh: line 81: mirror_topo_h2_create: command not found ./../../../net/forwarding/mirror_gre_topo_lib.sh: line 40: mirror_topo_h3_create: command not found [...] Fix by relying on $relative_path, set up by lib.sh, which should be imported by the test in question anyway, and source the file using relative path appropriate for the subdirectory. Fixes: d5ea2bfc806a ("selftests: forwarding: mirror_gre_lib: Extract generic functions") Fixes: 74ed089d48a4 ("selftests: forwarding: Split mirror_gre_topo_lib.sh") Signed-off-by: Petr Machata <petrm(a)mellanox.com> --- tools/testing/selftests/net/forwarding/mirror_gre_lib.sh | 2 +- tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh b/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh index 619b469..1388845 100644 --- a/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh +++ b/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -source mirror_lib.sh +source "$relative_path/mirror_lib.sh" quick_test_span_gre_dir_ips() { diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh b/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh index 2534195..39c03e2 100644 --- a/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh +++ b/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh @@ -33,7 +33,7 @@ # | | # +-------------------------------------------------------------------------+ -source mirror_topo_lib.sh +source "$relative_path/mirror_topo_lib.sh" mirror_gre_topo_h3_create() { -- 2.4.11 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 6 months

1
1
0 0

[PATCH v5] Add udmabuf misc device

by Gerd Hoffmann

A driver to let userspace turn memfd regions into dma-bufs. Use case: Allows qemu create dmabufs for the vga framebuffer or virtio-gpu ressources. Then they can be passed around to display those guest things on the host. To spice client for classic full framebuffer display, and hopefully some day to wayland server for seamless guest window display. qemu test branch: https://git.kraxel.org/cgit/qemu/log/?h=sirius/udmabuf Cc: David Airlie <airlied(a)linux.ie> Cc: Tomeu Vizoso <tomeu.vizoso(a)collabora.com> Cc: Daniel Vetter <daniel(a)ffwll.ch> Signed-off-by: Gerd Hoffmann <kraxel(a)redhat.com> --- Documentation/ioctl/ioctl-number.txt | 1 + include/uapi/linux/udmabuf.h | 33 +++ drivers/dma-buf/udmabuf.c | 302 ++++++++++++++++++++++ tools/testing/selftests/drivers/dma-buf/udmabuf.c | 96 +++++++ MAINTAINERS | 8 + drivers/dma-buf/Kconfig | 8 + drivers/dma-buf/Makefile | 1 + tools/testing/selftests/drivers/dma-buf/Makefile | 5 + 8 files changed, 454 insertions(+) create mode 100644 include/uapi/linux/udmabuf.h create mode 100644 drivers/dma-buf/udmabuf.c create mode 100644 tools/testing/selftests/drivers/dma-buf/udmabuf.c create mode 100644 tools/testing/selftests/drivers/dma-buf/Makefile diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 7f7413e597..1720c9e04a 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -271,6 +271,7 @@ Code Seq#(hex) Include File Comments 't' 90-91 linux/toshiba.h toshiba and toshiba_acpi SMM 'u' 00-1F linux/smb_fs.h gone 'u' 20-3F linux/uvcvideo.h USB video class host driver +'u' 40-4f linux/udmabuf.h userspace dma-buf misc device 'v' 00-1F linux/ext2_fs.h conflict! 'v' 00-1F linux/fs.h conflict! 'v' 00-0F linux/sonypi.h conflict! diff --git a/include/uapi/linux/udmabuf.h b/include/uapi/linux/udmabuf.h new file mode 100644 index 0000000000..46b6532ed8 --- /dev/null +++ b/include/uapi/linux/udmabuf.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_UDMABUF_H +#define _UAPI_LINUX_UDMABUF_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +#define UDMABUF_FLAGS_CLOEXEC 0x01 + +struct udmabuf_create { + __u32 memfd; + __u32 flags; + __u64 offset; + __u64 size; +}; + +struct udmabuf_create_item { + __u32 memfd; + __u32 __pad; + __u64 offset; + __u64 size; +}; + +struct udmabuf_create_list { + __u32 flags; + __u32 count; + struct udmabuf_create_item list[]; +}; + +#define UDMABUF_CREATE _IOW('u', 0x42, struct udmabuf_create) +#define UDMABUF_CREATE_LIST _IOW('u', 0x43, struct udmabuf_create_list) + +#endif /* _UAPI_LINUX_UDMABUF_H */ diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c new file mode 100644 index 0000000000..ae1390d2bd --- /dev/null +++ b/drivers/dma-buf/udmabuf.c @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/miscdevice.h> +#include <linux/dma-buf.h> +#include <linux/highmem.h> +#include <linux/cred.h> +#include <linux/shmem_fs.h> + +#include <uapi/linux/udmabuf.h> + +struct udmabuf { + u32 pagecount; + struct page **pages; +}; + +static int udmabuf_vm_fault(struct vm_fault *vmf) +{ + struct vm_area_struct *vma = vmf->vma; + struct udmabuf *ubuf = vma->vm_private_data; + + if (WARN_ON(vmf->pgoff >= ubuf->pagecount)) + return VM_FAULT_SIGBUS; + + vmf->page = ubuf->pages[vmf->pgoff]; + get_page(vmf->page); + return 0; +} + +static const struct vm_operations_struct udmabuf_vm_ops = { + .fault = udmabuf_vm_fault, +}; + +static int mmap_udmabuf(struct dma_buf *buf, struct vm_area_struct *vma) +{ + struct udmabuf *ubuf = buf->priv; + + if ((vma->vm_flags & (VM_SHARED | VM_MAYSHARE)) == 0) + return -EINVAL; + + vma->vm_ops = &udmabuf_vm_ops; + vma->vm_private_data = ubuf; + return 0; +} + +static struct sg_table *map_udmabuf(struct dma_buf_attachment *at, + enum dma_data_direction direction) +{ + struct udmabuf *ubuf = at->dmabuf->priv; + struct sg_table *sg; + + sg = kzalloc(sizeof(*sg), GFP_KERNEL); + if (!sg) + goto err1; + if (sg_alloc_table_from_pages(sg, ubuf->pages, ubuf->pagecount, + 0, ubuf->pagecount << PAGE_SHIFT, + GFP_KERNEL) < 0) + goto err2; + if (!dma_map_sg(at->dev, sg->sgl, sg->nents, direction)) + goto err3; + + return sg; + +err3: + sg_free_table(sg); +err2: + kfree(sg); +err1: + return ERR_PTR(-ENOMEM); +} + +static void unmap_udmabuf(struct dma_buf_attachment *at, + struct sg_table *sg, + enum dma_data_direction direction) +{ + sg_free_table(sg); + kfree(sg); +} + +static void release_udmabuf(struct dma_buf *buf) +{ + struct udmabuf *ubuf = buf->priv; + pgoff_t pg; + + for (pg = 0; pg < ubuf->pagecount; pg++) + put_page(ubuf->pages[pg]); + kfree(ubuf->pages); + kfree(ubuf); +} + +static void *kmap_atomic_udmabuf(struct dma_buf *buf, unsigned long page_num) +{ + struct udmabuf *ubuf = buf->priv; + struct page *page = ubuf->pages[page_num]; + + return kmap_atomic(page); +} + +static void kunmap_atomic_udmabuf(struct dma_buf *buf, unsigned long page_num, + void *vaddr) +{ + kunmap_atomic(vaddr); +} + +static void *kmap_udmabuf(struct dma_buf *buf, unsigned long page_num) +{ + struct udmabuf *ubuf = buf->priv; + struct page *page = ubuf->pages[page_num]; + + return kmap(page); +} + +static void kunmap_udmabuf(struct dma_buf *buf, unsigned long page_num, + void *vaddr) +{ + kunmap(vaddr); +} + +static struct dma_buf_ops udmabuf_ops = { + .map_dma_buf = map_udmabuf, + .unmap_dma_buf = unmap_udmabuf, + .release = release_udmabuf, + .map_atomic = kmap_atomic_udmabuf, + .unmap_atomic = kunmap_atomic_udmabuf, + .map = kmap_udmabuf, + .unmap = kunmap_udmabuf, + .mmap = mmap_udmabuf, +}; + +#define SEALS_WANTED (F_SEAL_SHRINK) +#define SEALS_DENIED (F_SEAL_WRITE) + +static long udmabuf_create(struct udmabuf_create_list *head, + struct udmabuf_create_item *list) +{ + DEFINE_DMA_BUF_EXPORT_INFO(exp_info); + struct file *memfd = NULL; + struct udmabuf *ubuf; + struct dma_buf *buf; + pgoff_t pgoff, pgcnt, pgidx, pgbuf; + struct page *page; + int seals, ret = -EINVAL; + u32 i, flags; + + ubuf = kzalloc(sizeof(struct udmabuf), GFP_KERNEL); + if (!ubuf) + return -ENOMEM; + + for (i = 0; i < head->count; i++) { + if (!IS_ALIGNED(list[i].offset, PAGE_SIZE)) + goto err_free_ubuf; + if (!IS_ALIGNED(list[i].size, PAGE_SIZE)) + goto err_free_ubuf; + ubuf->pagecount += list[i].size >> PAGE_SHIFT; + } + ubuf->pages = kmalloc_array(ubuf->pagecount, sizeof(struct page *), + GFP_KERNEL); + if (!ubuf->pages) { + ret = -ENOMEM; + goto err_free_ubuf; + } + + pgbuf = 0; + for (i = 0; i < head->count; i++) { + memfd = fget(list[i].memfd); + if (!memfd) + goto err_put_pages; + if (!shmem_mapping(file_inode(memfd)->i_mapping)) + goto err_put_pages; + seals = memfd_fcntl(memfd, F_GET_SEALS, 0); + if (seals == -EINVAL || + (seals & SEALS_WANTED) != SEALS_WANTED || + (seals & SEALS_DENIED) != 0) + goto err_put_pages; + pgoff = list[i].offset >> PAGE_SHIFT; + pgcnt = list[i].size >> PAGE_SHIFT; + for (pgidx = 0; pgidx < pgcnt; pgidx++) { + page = shmem_read_mapping_page( + file_inode(memfd)->i_mapping, pgoff + pgidx); + if (IS_ERR(page)) { + ret = PTR_ERR(page); + goto err_put_pages; + } + ubuf->pages[pgbuf++] = page; + } + fput(memfd); + } + memfd = NULL; + + exp_info.ops = &udmabuf_ops; + exp_info.size = ubuf->pagecount << PAGE_SHIFT; + exp_info.priv = ubuf; + + buf = dma_buf_export(&exp_info); + if (IS_ERR(buf)) { + ret = PTR_ERR(buf); + goto err_put_pages; + } + + flags = 0; + if (head->flags & UDMABUF_FLAGS_CLOEXEC) + flags |= O_CLOEXEC; + return dma_buf_fd(buf, flags); + +err_put_pages: + while (pgbuf > 0) + put_page(ubuf->pages[--pgbuf]); +err_free_ubuf: + fput(memfd); + kfree(ubuf->pages); + kfree(ubuf); + return ret; +} + +static long udmabuf_ioctl_create(struct file *filp, unsigned long arg) +{ + struct udmabuf_create create; + struct udmabuf_create_list head; + struct udmabuf_create_item list; + + if (copy_from_user(&create, (void __user *)arg, + sizeof(struct udmabuf_create))) + return -EFAULT; + + head.flags = create.flags; + head.count = 1; + list.memfd = create.memfd; + list.offset = create.offset; + list.size = create.size; + + return udmabuf_create(&head, &list); +} + +static long udmabuf_ioctl_create_list(struct file *filp, unsigned long arg) +{ + struct udmabuf_create_list head; + struct udmabuf_create_item *list; + int ret = -EINVAL; + u32 lsize; + + if (copy_from_user(&head, (void __user *)arg, sizeof(head))) + return -EFAULT; + if (head.count > 1024) + return -EINVAL; + lsize = sizeof(struct udmabuf_create_item) * head.count; + list = memdup_user((void __user *)(arg + sizeof(head)), lsize); + if (IS_ERR(list)) + return PTR_ERR(list); + + ret = udmabuf_create(&head, list); + kfree(list); + return ret; +} + +static long udmabuf_ioctl(struct file *filp, unsigned int ioctl, + unsigned long arg) +{ + long ret; + + switch (ioctl) { + case UDMABUF_CREATE: + ret = udmabuf_ioctl_create(filp, arg); + break; + case UDMABUF_CREATE_LIST: + ret = udmabuf_ioctl_create_list(filp, arg); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static const struct file_operations udmabuf_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = udmabuf_ioctl, +}; + +static struct miscdevice udmabuf_misc = { + .minor = MISC_DYNAMIC_MINOR, + .name = "udmabuf", + .fops = &udmabuf_fops, +}; + +static int __init udmabuf_dev_init(void) +{ + return misc_register(&udmabuf_misc); +} + +static void __exit udmabuf_dev_exit(void) +{ + misc_deregister(&udmabuf_misc); +} + +module_init(udmabuf_dev_init) +module_exit(udmabuf_dev_exit) + +MODULE_AUTHOR("Gerd Hoffmann <kraxel(a)redhat.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/tools/testing/selftests/drivers/dma-buf/udmabuf.c b/tools/testing/selftests/drivers/dma-buf/udmabuf.c new file mode 100644 index 0000000000..376b1d6730 --- /dev/null +++ b/tools/testing/selftests/drivers/dma-buf/udmabuf.c @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <string.h> +#include <errno.h> +#include <fcntl.h> +#include <malloc.h> + +#include <sys/ioctl.h> +#include <sys/syscall.h> +#include <linux/memfd.h> +#include <linux/udmabuf.h> + +#define TEST_PREFIX "drivers/dma-buf/udmabuf" +#define NUM_PAGES 4 + +static int memfd_create(const char *name, unsigned int flags) +{ + return syscall(__NR_memfd_create, name, flags); +} + +int main(int argc, char *argv[]) +{ + struct udmabuf_create create; + int devfd, memfd, buf, ret; + off_t size; + void *mem; + + devfd = open("/dev/udmabuf", O_RDWR); + if (devfd < 0) { + printf("%s: [skip,no-udmabuf]\n", TEST_PREFIX); + exit(77); + } + + memfd = memfd_create("udmabuf-test", MFD_CLOEXEC); + if (memfd < 0) { + printf("%s: [skip,no-memfd]\n", TEST_PREFIX); + exit(77); + } + + size = getpagesize() * NUM_PAGES; + ret = ftruncate(memfd, size); + if (ret == -1) { + printf("%s: [FAIL,memfd-truncate]\n", TEST_PREFIX); + exit(1); + } + + memset(&create, 0, sizeof(create)); + + /* should fail (offset not page aligned) */ + create.memfd = memfd; + create.offset = getpagesize()/2; + create.size = getpagesize(); + buf = ioctl(devfd, UDMABUF_CREATE, &create); + if (buf >= 0) { + printf("%s: [FAIL,test-1]\n", TEST_PREFIX); + exit(1); + } + + /* should fail (size not multiple of page) */ + create.memfd = memfd; + create.offset = 0; + create.size = getpagesize()/2; + buf = ioctl(devfd, UDMABUF_CREATE, &create); + if (buf >= 0) { + printf("%s: [FAIL,test-2]\n", TEST_PREFIX); + exit(1); + } + + /* should fail (not memfd) */ + create.memfd = 0; /* stdin */ + create.offset = 0; + create.size = size; + buf = ioctl(devfd, UDMABUF_CREATE, &create); + if (buf >= 0) { + printf("%s: [FAIL,test-3]\n", TEST_PREFIX); + exit(1); + } + + /* should work */ + create.memfd = memfd; + create.offset = 0; + create.size = size; + buf = ioctl(devfd, UDMABUF_CREATE, &create); + if (buf < 0) { + printf("%s: [FAIL,test-4]\n", TEST_PREFIX); + exit(1); + } + + fprintf(stderr, "%s: ok\n", TEST_PREFIX); + close(buf); + close(memfd); + close(devfd); + return 0; +} diff --git a/MAINTAINERS b/MAINTAINERS index 9c125f705f..aa91159afd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14426,6 +14426,14 @@ S: Maintained F: Documentation/filesystems/udf.txt F: fs/udf/ +UDMABUF DRIVER +M: Gerd Hoffmann <kraxel(a)redhat.com> +L: dri-devel(a)lists.freedesktop.org +S: Maintained +F: drivers/dma-buf/udmabuf.c +F: include/uapi/linux/udmabuf.h +F: tools/testing/selftests/drivers/dma-buf/udmabuf.c + UDRAW TABLET M: Bastien Nocera <hadess(a)hadess.net> L: linux-input(a)vger.kernel.org diff --git a/drivers/dma-buf/Kconfig b/drivers/dma-buf/Kconfig index ed3b785bae..338129eb12 100644 --- a/drivers/dma-buf/Kconfig +++ b/drivers/dma-buf/Kconfig @@ -30,4 +30,12 @@ config SW_SYNC WARNING: improper use of this can result in deadlocking kernel drivers from userspace. Intended for test and debug only. +config UDMABUF + bool "userspace dmabuf misc driver" + default n + depends on DMA_SHARED_BUFFER + help + A driver to let userspace turn memfd regions into dma-bufs. + Qemu can use this to create host dmabufs for guest framebuffers. + endmenu diff --git a/drivers/dma-buf/Makefile b/drivers/dma-buf/Makefile index c33bf88631..0913a6ccab 100644 --- a/drivers/dma-buf/Makefile +++ b/drivers/dma-buf/Makefile @@ -1,3 +1,4 @@ obj-y := dma-buf.o dma-fence.o dma-fence-array.o reservation.o seqno-fence.o obj-$(CONFIG_SYNC_FILE) += sync_file.o obj-$(CONFIG_SW_SYNC) += sw_sync.o sync_debug.o +obj-$(CONFIG_UDMABUF) += udmabuf.o diff --git a/tools/testing/selftests/drivers/dma-buf/Makefile b/tools/testing/selftests/drivers/dma-buf/Makefile new file mode 100644 index 0000000000..4154c3d7aa --- /dev/null +++ b/tools/testing/selftests/drivers/dma-buf/Makefile @@ -0,0 +1,5 @@ +CFLAGS += -I../../../../../usr/include/ + +TEST_GEN_PROGS := udmabuf + +include ../../lib.mk -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 6 months

1
0
0 0

[PATCH net-next 0/2] selftests: forwarding: mirror_vlan: Fixlets

by Petr Machata

This patchset includes two small fixes for the tests that were introduced in commit 1bb58d2d3cbe ("Merge branch 'Mirroring-tests-involving-VLAN'"). In patch #1, a "tc action trap" is uninstalled after the suite runs, instead of being installed again. In patch #2, a test in suite is renamed to differentiate it from another test of the same name. Petr Machata (2): selftests: forwarding: mirror_vlan: Uninstall trap selftests: forwarding: mirror_vlan: Change test description tools/testing/selftests/net/forwarding/mirror_vlan.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 2.4.11 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 6 months

2
3
0 0

[RFC PATCH for 4.18 16/16] rseq: selftests: Provide Makefile, scripts, gitignore (v2)

by Mathieu Desnoyers

A run_param_test.sh script runs many variants of the parametrizable tests. Wire up the rseq Makefile, add directory entry into MAINTAINERS file. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> CC: Shuah Khan <shuahkh(a)osg.samsung.com> CC: Russell King <linux(a)arm.linux.org.uk> CC: Catalin Marinas <catalin.marinas(a)arm.com> CC: Will Deacon <will.deacon(a)arm.com> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Paul Turner <pjt(a)google.com> CC: Andrew Hunter <ahh(a)google.com> CC: Peter Zijlstra <peterz(a)infradead.org> CC: Andy Lutomirski <luto(a)amacapital.net> CC: Andi Kleen <andi(a)firstfloor.org> CC: Dave Watson <davejwatson(a)fb.com> CC: Chris Lameter <cl(a)linux.com> CC: Ingo Molnar <mingo(a)redhat.com> CC: "H. Peter Anvin" <hpa(a)zytor.com> CC: Ben Maurer <bmaurer(a)fb.com> CC: Steven Rostedt <rostedt(a)goodmis.org> CC: "Paul E. McKenney" <paulmck(a)linux.vnet.ibm.com> CC: Josh Triplett <josh(a)joshtriplett.org> CC: Linus Torvalds <torvalds(a)linux-foundation.org> CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: linux-kselftest(a)vger.kernel.org CC: linux-api(a)vger.kernel.org --- Changes since v1: - Use only rseq, remove use of cpu_opv. --- MAINTAINERS | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/rseq/.gitignore | 6 ++ tools/testing/selftests/rseq/Makefile | 30 ++++++ tools/testing/selftests/rseq/run_param_test.sh | 121 +++++++++++++++++++++++++ 5 files changed, 159 insertions(+) create mode 100644 tools/testing/selftests/rseq/.gitignore create mode 100644 tools/testing/selftests/rseq/Makefile create mode 100755 tools/testing/selftests/rseq/run_param_test.sh diff --git a/MAINTAINERS b/MAINTAINERS index be42f5bfc0c9..720b57fac5db 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11982,6 +11982,7 @@ S: Supported F: kernel/rseq.c F: include/uapi/linux/rseq.h F: include/trace/events/rseq.h +F: tools/testing/selftests/rseq/ RFKILL M: Johannes Berg <johannes(a)sipsolutions.net> diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 32aafa92074c..593fb44c9cd4 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -28,6 +28,7 @@ TARGETS += powerpc TARGETS += proc TARGETS += pstore TARGETS += ptrace +TARGETS += rseq TARGETS += seccomp TARGETS += sigaltstack TARGETS += size diff --git a/tools/testing/selftests/rseq/.gitignore b/tools/testing/selftests/rseq/.gitignore new file mode 100644 index 000000000000..cc610da7e369 --- /dev/null +++ b/tools/testing/selftests/rseq/.gitignore @@ -0,0 +1,6 @@ +basic_percpu_ops_test +basic_test +basic_rseq_op_test +param_test +param_test_benchmark +param_test_compare_twice diff --git a/tools/testing/selftests/rseq/Makefile b/tools/testing/selftests/rseq/Makefile new file mode 100644 index 000000000000..c30c52e1d0d2 --- /dev/null +++ b/tools/testing/selftests/rseq/Makefile @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: GPL-2.0+ OR MIT +CFLAGS += -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ +LDLIBS += -lpthread + +# Own dependencies because we only want to build against 1st prerequisite, but +# still track changes to header files and depend on shared object. +OVERRIDE_TARGETS = 1 + +TEST_GEN_PROGS = basic_test basic_percpu_ops_test param_test \ + param_test_benchmark param_test_compare_twice + +TEST_GEN_PROGS_EXTENDED = librseq.so + +TEST_PROGS = run_param_test.sh + +include ../lib.mk + +$(OUTPUT)/librseq.so: rseq.c rseq.h rseq-*.h + $(CC) $(CFLAGS) -shared -fPIC $< $(LDLIBS) -o $@ + +$(OUTPUT)/%: %.c $(TEST_GEN_PROGS_EXTENDED) rseq.h rseq-*.h + $(CC) $(CFLAGS) $< $(LDLIBS) -lrseq -o $@ + +$(OUTPUT)/param_test_benchmark: param_test.c $(TEST_GEN_PROGS_EXTENDED) \ + rseq.h rseq-*.h + $(CC) $(CFLAGS) -DBENCHMARK $< $(LDLIBS) -lrseq -o $@ + +$(OUTPUT)/param_test_compare_twice: param_test.c $(TEST_GEN_PROGS_EXTENDED) \ + rseq.h rseq-*.h + $(CC) $(CFLAGS) -DRSEQ_COMPARE_TWICE $< $(LDLIBS) -lrseq -o $@ diff --git a/tools/testing/selftests/rseq/run_param_test.sh b/tools/testing/selftests/rseq/run_param_test.sh new file mode 100755 index 000000000000..3acd6d75ff9f --- /dev/null +++ b/tools/testing/selftests/rseq/run_param_test.sh @@ -0,0 +1,121 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ or MIT + +EXTRA_ARGS=${@} + +OLDIFS="$IFS" +IFS=$'\n' +TEST_LIST=( + "-T s" + "-T l" + "-T b" + "-T b -M" + "-T m" + "-T m -M" + "-T i" +) + +TEST_NAME=( + "spinlock" + "list" + "buffer" + "buffer with barrier" + "memcpy" + "memcpy with barrier" + "increment" +) +IFS="$OLDIFS" + +REPS=1000 +SLOW_REPS=100 + +function do_tests() +{ + local i=0 + while [ "$i" -lt "${#TEST_LIST[@]}" ]; do + echo "Running test ${TEST_NAME[$i]}" + ./param_test ${TEST_LIST[$i]} -r ${REPS} ${@} ${EXTRA_ARGS} || exit 1 + echo "Running compare-twice test ${TEST_NAME[$i]}" + ./param_test_compare_twice ${TEST_LIST[$i]} -r ${REPS} ${@} ${EXTRA_ARGS} || exit 1 + let "i++" + done +} + +echo "Default parameters" +do_tests + +echo "Loop injection: 10000 loops" + +OLDIFS="$IFS" +IFS=$'\n' +INJECT_LIST=( + "1" + "2" + "3" + "4" + "5" + "6" + "7" + "8" + "9" +) +IFS="$OLDIFS" + +NR_LOOPS=10000 + +i=0 +while [ "$i" -lt "${#INJECT_LIST[@]}" ]; do + echo "Injecting at <${INJECT_LIST[$i]}>" + do_tests -${INJECT_LIST[i]} ${NR_LOOPS} + let "i++" +done +NR_LOOPS= + +function inject_blocking() +{ + OLDIFS="$IFS" + IFS=$'\n' + INJECT_LIST=( + "7" + "8" + "9" + ) + IFS="$OLDIFS" + + NR_LOOPS=-1 + + i=0 + while [ "$i" -lt "${#INJECT_LIST[@]}" ]; do + echo "Injecting at <${INJECT_LIST[$i]}>" + do_tests -${INJECT_LIST[i]} -1 ${@} + let "i++" + done + NR_LOOPS= +} + +echo "Yield injection (25%)" +inject_blocking -m 4 -y + +echo "Yield injection (50%)" +inject_blocking -m 2 -y + +echo "Yield injection (100%)" +inject_blocking -m 1 -y + +echo "Kill injection (25%)" +inject_blocking -m 4 -k + +echo "Kill injection (50%)" +inject_blocking -m 2 -k + +echo "Kill injection (100%)" +inject_blocking -m 1 -k + +echo "Sleep injection (1ms, 25%)" +inject_blocking -m 4 -s 1 + +echo "Sleep injection (1ms, 50%)" +inject_blocking -m 2 -s 1 + +echo "Sleep injection (1ms, 100%)" +inject_blocking -m 1 -s 1 -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 6 months

1
0
0 0

[RFC PATCH for 4.18 15/16] rseq: selftests: Provide parametrized tests (v2)

by Mathieu Desnoyers

"param_test" is a parametrizable restartable sequences test. See the "--help" output for usage. "param_test_benchmark" is the same as "param_test", but it removes testing book-keeping code to allow accurate benchmarks. "param_test_compare_twice" is the same as "param_test", but it performs each comparison within rseq critical section twice, thus validating invariants. If any of the second comparisons fails, an error message is printed and the test aborts. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> CC: Shuah Khan <shuahkh(a)osg.samsung.com> CC: Russell King <linux(a)arm.linux.org.uk> CC: Catalin Marinas <catalin.marinas(a)arm.com> CC: Will Deacon <will.deacon(a)arm.com> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Paul Turner <pjt(a)google.com> CC: Andrew Hunter <ahh(a)google.com> CC: Peter Zijlstra <peterz(a)infradead.org> CC: Andy Lutomirski <luto(a)amacapital.net> CC: Andi Kleen <andi(a)firstfloor.org> CC: Dave Watson <davejwatson(a)fb.com> CC: Chris Lameter <cl(a)linux.com> CC: Ingo Molnar <mingo(a)redhat.com> CC: "H. Peter Anvin" <hpa(a)zytor.com> CC: Ben Maurer <bmaurer(a)fb.com> CC: Steven Rostedt <rostedt(a)goodmis.org> CC: "Paul E. McKenney" <paulmck(a)linux.vnet.ibm.com> CC: Josh Triplett <josh(a)joshtriplett.org> CC: Linus Torvalds <torvalds(a)linux-foundation.org> CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: linux-kselftest(a)vger.kernel.org CC: linux-api(a)vger.kernel.org --- Changes since v1: - Use only rseq, remove use of cpu_opv. --- tools/testing/selftests/rseq/param_test.c | 1260 +++++++++++++++++++++++++++++ 1 file changed, 1260 insertions(+) create mode 100644 tools/testing/selftests/rseq/param_test.c diff --git a/tools/testing/selftests/rseq/param_test.c b/tools/testing/selftests/rseq/param_test.c new file mode 100644 index 000000000000..6a9f602a8718 --- /dev/null +++ b/tools/testing/selftests/rseq/param_test.c @@ -0,0 +1,1260 @@ +// SPDX-License-Identifier: LGPL-2.1 +#define _GNU_SOURCE +#include <assert.h> +#include <pthread.h> +#include <sched.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <syscall.h> +#include <unistd.h> +#include <poll.h> +#include <sys/types.h> +#include <signal.h> +#include <errno.h> +#include <stddef.h> + +static inline pid_t gettid(void) +{ + return syscall(__NR_gettid); +} + +#define NR_INJECT 9 +static int loop_cnt[NR_INJECT + 1]; + +static int loop_cnt_1 asm("asm_loop_cnt_1") __attribute__((used)); +static int loop_cnt_2 asm("asm_loop_cnt_2") __attribute__((used)); +static int loop_cnt_3 asm("asm_loop_cnt_3") __attribute__((used)); +static int loop_cnt_4 asm("asm_loop_cnt_4") __attribute__((used)); +static int loop_cnt_5 asm("asm_loop_cnt_5") __attribute__((used)); +static int loop_cnt_6 asm("asm_loop_cnt_6") __attribute__((used)); + +static int opt_modulo, verbose; + +static int opt_yield, opt_signal, opt_sleep, + opt_disable_rseq, opt_threads = 200, + opt_disable_mod = 0, opt_test = 's', opt_mb = 0; + +#ifndef RSEQ_SKIP_FASTPATH +static long long opt_reps = 5000; +#else +static long long opt_reps = 100; +#endif + +static __thread __attribute__((tls_model("initial-exec"))) +unsigned int signals_delivered; + +#ifndef BENCHMARK + +static __thread __attribute__((tls_model("initial-exec"), unused)) +unsigned int yield_mod_cnt, nr_abort; + +#define printf_verbose(fmt, ...) \ + do { \ + if (verbose) \ + printf(fmt, ## __VA_ARGS__); \ + } while (0) + +#if defined(__x86_64__) || defined(__i386__) + +#define INJECT_ASM_REG "eax" + +#define RSEQ_INJECT_CLOBBER \ + , INJECT_ASM_REG + +#ifdef __i386__ + +#define RSEQ_INJECT_ASM(n) \ + "mov asm_loop_cnt_" #n ", %%" INJECT_ASM_REG "\n\t" \ + "test %%" INJECT_ASM_REG ",%%" INJECT_ASM_REG "\n\t" \ + "jz 333f\n\t" \ + "222:\n\t" \ + "dec %%" INJECT_ASM_REG "\n\t" \ + "jnz 222b\n\t" \ + "333:\n\t" + +#elif defined(__x86_64__) + +#define RSEQ_INJECT_ASM(n) \ + "lea asm_loop_cnt_" #n "(%%rip), %%" INJECT_ASM_REG "\n\t" \ + "mov (%%" INJECT_ASM_REG "), %%" INJECT_ASM_REG "\n\t" \ + "test %%" INJECT_ASM_REG ",%%" INJECT_ASM_REG "\n\t" \ + "jz 333f\n\t" \ + "222:\n\t" \ + "dec %%" INJECT_ASM_REG "\n\t" \ + "jnz 222b\n\t" \ + "333:\n\t" + +#else +#error "Unsupported architecture" +#endif + +#elif defined(__ARMEL__) + +#define RSEQ_INJECT_INPUT \ + , [loop_cnt_1]"m"(loop_cnt[1]) \ + , [loop_cnt_2]"m"(loop_cnt[2]) \ + , [loop_cnt_3]"m"(loop_cnt[3]) \ + , [loop_cnt_4]"m"(loop_cnt[4]) \ + , [loop_cnt_5]"m"(loop_cnt[5]) \ + , [loop_cnt_6]"m"(loop_cnt[6]) + +#define INJECT_ASM_REG "r4" + +#define RSEQ_INJECT_CLOBBER \ + , INJECT_ASM_REG + +#define RSEQ_INJECT_ASM(n) \ + "ldr " INJECT_ASM_REG ", %[loop_cnt_" #n "]\n\t" \ + "cmp " INJECT_ASM_REG ", #0\n\t" \ + "beq 333f\n\t" \ + "222:\n\t" \ + "subs " INJECT_ASM_REG ", #1\n\t" \ + "bne 222b\n\t" \ + "333:\n\t" + +#elif __PPC__ + +#define RSEQ_INJECT_INPUT \ + , [loop_cnt_1]"m"(loop_cnt[1]) \ + , [loop_cnt_2]"m"(loop_cnt[2]) \ + , [loop_cnt_3]"m"(loop_cnt[3]) \ + , [loop_cnt_4]"m"(loop_cnt[4]) \ + , [loop_cnt_5]"m"(loop_cnt[5]) \ + , [loop_cnt_6]"m"(loop_cnt[6]) + +#define INJECT_ASM_REG "r18" + +#define RSEQ_INJECT_CLOBBER \ + , INJECT_ASM_REG + +#define RSEQ_INJECT_ASM(n) \ + "lwz %%" INJECT_ASM_REG ", %[loop_cnt_" #n "]\n\t" \ + "cmpwi %%" INJECT_ASM_REG ", 0\n\t" \ + "beq 333f\n\t" \ + "222:\n\t" \ + "subic. %%" INJECT_ASM_REG ", %%" INJECT_ASM_REG ", 1\n\t" \ + "bne 222b\n\t" \ + "333:\n\t" +#else +#error unsupported target +#endif + +#define RSEQ_INJECT_FAILED \ + nr_abort++; + +#define RSEQ_INJECT_C(n) \ +{ \ + int loc_i, loc_nr_loops = loop_cnt[n]; \ + \ + for (loc_i = 0; loc_i < loc_nr_loops; loc_i++) { \ + rseq_barrier(); \ + } \ + if (loc_nr_loops == -1 && opt_modulo) { \ + if (yield_mod_cnt == opt_modulo - 1) { \ + if (opt_sleep > 0) \ + poll(NULL, 0, opt_sleep); \ + if (opt_yield) \ + sched_yield(); \ + if (opt_signal) \ + raise(SIGUSR1); \ + yield_mod_cnt = 0; \ + } else { \ + yield_mod_cnt++; \ + } \ + } \ +} + +#else + +#define printf_verbose(fmt, ...) + +#endif /* BENCHMARK */ + +#include "rseq.h" + +struct percpu_lock_entry { + intptr_t v; +} __attribute__((aligned(128))); + +struct percpu_lock { + struct percpu_lock_entry c[CPU_SETSIZE]; +}; + +struct test_data_entry { + intptr_t count; +} __attribute__((aligned(128))); + +struct spinlock_test_data { + struct percpu_lock lock; + struct test_data_entry c[CPU_SETSIZE]; +}; + +struct spinlock_thread_test_data { + struct spinlock_test_data *data; + long long reps; + int reg; +}; + +struct inc_test_data { + struct test_data_entry c[CPU_SETSIZE]; +}; + +struct inc_thread_test_data { + struct inc_test_data *data; + long long reps; + int reg; +}; + +struct percpu_list_node { + intptr_t data; + struct percpu_list_node *next; +}; + +struct percpu_list_entry { + struct percpu_list_node *head; +} __attribute__((aligned(128))); + +struct percpu_list { + struct percpu_list_entry c[CPU_SETSIZE]; +}; + +#define BUFFER_ITEM_PER_CPU 100 + +struct percpu_buffer_node { + intptr_t data; +}; + +struct percpu_buffer_entry { + intptr_t offset; + intptr_t buflen; + struct percpu_buffer_node **array; +} __attribute__((aligned(128))); + +struct percpu_buffer { + struct percpu_buffer_entry c[CPU_SETSIZE]; +}; + +#define MEMCPY_BUFFER_ITEM_PER_CPU 100 + +struct percpu_memcpy_buffer_node { + intptr_t data1; + uint64_t data2; +}; + +struct percpu_memcpy_buffer_entry { + intptr_t offset; + intptr_t buflen; + struct percpu_memcpy_buffer_node *array; +} __attribute__((aligned(128))); + +struct percpu_memcpy_buffer { + struct percpu_memcpy_buffer_entry c[CPU_SETSIZE]; +}; + +/* A simple percpu spinlock. Grabs lock on current cpu. */ +static int rseq_this_cpu_lock(struct percpu_lock *lock) +{ + int cpu; + + for (;;) { + int ret; + + cpu = rseq_cpu_start(); + ret = rseq_cmpeqv_storev(&lock->c[cpu].v, + 0, 1, cpu); + if (rseq_likely(!ret)) + break; + /* Retry if comparison fails or rseq aborts. */ + } + /* + * Acquire semantic when taking lock after control dependency. + * Matches rseq_smp_store_release(). + */ + rseq_smp_acquire__after_ctrl_dep(); + return cpu; +} + +static void rseq_percpu_unlock(struct percpu_lock *lock, int cpu) +{ + assert(lock->c[cpu].v == 1); + /* + * Release lock, with release semantic. Matches + * rseq_smp_acquire__after_ctrl_dep(). + */ + rseq_smp_store_release(&lock->c[cpu].v, 0); +} + +void *test_percpu_spinlock_thread(void *arg) +{ + struct spinlock_thread_test_data *thread_data = arg; + struct spinlock_test_data *data = thread_data->data; + long long i, reps; + + if (!opt_disable_rseq && thread_data->reg && + rseq_register_current_thread()) + abort(); + reps = thread_data->reps; + for (i = 0; i < reps; i++) { + int cpu = rseq_cpu_start(); + + cpu = rseq_this_cpu_lock(&data->lock); + data->c[cpu].count++; + rseq_percpu_unlock(&data->lock, cpu); +#ifndef BENCHMARK + if (i != 0 && !(i % (reps / 10))) + printf_verbose("tid %d: count %lld\n", (int) gettid(), i); +#endif + } + printf_verbose("tid %d: number of rseq abort: %d, signals delivered: %u\n", + (int) gettid(), nr_abort, signals_delivered); + if (!opt_disable_rseq && thread_data->reg && + rseq_unregister_current_thread()) + abort(); + return NULL; +} + +/* + * A simple test which implements a sharded counter using a per-cpu + * lock. Obviously real applications might prefer to simply use a + * per-cpu increment; however, this is reasonable for a test and the + * lock can be extended to synchronize more complicated operations. + */ +void test_percpu_spinlock(void) +{ + const int num_threads = opt_threads; + int i, ret; + uint64_t sum; + pthread_t test_threads[num_threads]; + struct spinlock_test_data data; + struct spinlock_thread_test_data thread_data[num_threads]; + + memset(&data, 0, sizeof(data)); + for (i = 0; i < num_threads; i++) { + thread_data[i].reps = opt_reps; + if (opt_disable_mod <= 0 || (i % opt_disable_mod)) + thread_data[i].reg = 1; + else + thread_data[i].reg = 0; + thread_data[i].data = &data; + ret = pthread_create(&test_threads[i], NULL, + test_percpu_spinlock_thread, + &thread_data[i]); + if (ret) { + errno = ret; + perror("pthread_create"); + abort(); + } + } + + for (i = 0; i < num_threads; i++) { + ret = pthread_join(test_threads[i], NULL); + if (ret) { + errno = ret; + perror("pthread_join"); + abort(); + } + } + + sum = 0; + for (i = 0; i < CPU_SETSIZE; i++) + sum += data.c[i].count; + + assert(sum == (uint64_t)opt_reps * num_threads); +} + +void *test_percpu_inc_thread(void *arg) +{ + struct inc_thread_test_data *thread_data = arg; + struct inc_test_data *data = thread_data->data; + long long i, reps; + + if (!opt_disable_rseq && thread_data->reg && + rseq_register_current_thread()) + abort(); + reps = thread_data->reps; + for (i = 0; i < reps; i++) { + int ret; + + do { + int cpu; + + cpu = rseq_cpu_start(); + ret = rseq_addv(&data->c[cpu].count, 1, cpu); + } while (rseq_unlikely(ret)); +#ifndef BENCHMARK + if (i != 0 && !(i % (reps / 10))) + printf_verbose("tid %d: count %lld\n", (int) gettid(), i); +#endif + } + printf_verbose("tid %d: number of rseq abort: %d, signals delivered: %u\n", + (int) gettid(), nr_abort, signals_delivered); + if (!opt_disable_rseq && thread_data->reg && + rseq_unregister_current_thread()) + abort(); + return NULL; +} + +void test_percpu_inc(void) +{ + const int num_threads = opt_threads; + int i, ret; + uint64_t sum; + pthread_t test_threads[num_threads]; + struct inc_test_data data; + struct inc_thread_test_data thread_data[num_threads]; + + memset(&data, 0, sizeof(data)); + for (i = 0; i < num_threads; i++) { + thread_data[i].reps = opt_reps; + if (opt_disable_mod <= 0 || (i % opt_disable_mod)) + thread_data[i].reg = 1; + else + thread_data[i].reg = 0; + thread_data[i].data = &data; + ret = pthread_create(&test_threads[i], NULL, + test_percpu_inc_thread, + &thread_data[i]); + if (ret) { + errno = ret; + perror("pthread_create"); + abort(); + } + } + + for (i = 0; i < num_threads; i++) { + ret = pthread_join(test_threads[i], NULL); + if (ret) { + errno = ret; + perror("pthread_join"); + abort(); + } + } + + sum = 0; + for (i = 0; i < CPU_SETSIZE; i++) + sum += data.c[i].count; + + assert(sum == (uint64_t)opt_reps * num_threads); +} + +void this_cpu_list_push(struct percpu_list *list, + struct percpu_list_node *node, + int *_cpu) +{ + int cpu; + + for (;;) { + intptr_t *targetptr, newval, expect; + int ret; + + cpu = rseq_cpu_start(); + /* Load list->c[cpu].head with single-copy atomicity. */ + expect = (intptr_t)RSEQ_READ_ONCE(list->c[cpu].head); + newval = (intptr_t)node; + targetptr = (intptr_t *)&list->c[cpu].head; + node->next = (struct percpu_list_node *)expect; + ret = rseq_cmpeqv_storev(targetptr, expect, newval, cpu); + if (rseq_likely(!ret)) + break; + /* Retry if comparison fails or rseq aborts. */ + } + if (_cpu) + *_cpu = cpu; +} + +/* + * Unlike a traditional lock-less linked list; the availability of a + * rseq primitive allows us to implement pop without concerns over + * ABA-type races. + */ +struct percpu_list_node *this_cpu_list_pop(struct percpu_list *list, + int *_cpu) +{ + struct percpu_list_node *node = NULL; + int cpu; + + for (;;) { + struct percpu_list_node *head; + intptr_t *targetptr, expectnot, *load; + off_t offset; + int ret; + + cpu = rseq_cpu_start(); + targetptr = (intptr_t *)&list->c[cpu].head; + expectnot = (intptr_t)NULL; + offset = offsetof(struct percpu_list_node, next); + load = (intptr_t *)&head; + ret = rseq_cmpnev_storeoffp_load(targetptr, expectnot, + offset, load, cpu); + if (rseq_likely(!ret)) { + node = head; + break; + } + if (ret > 0) + break; + /* Retry if rseq aborts. */ + } + if (_cpu) + *_cpu = cpu; + return node; +} + +/* + * __percpu_list_pop is not safe against concurrent accesses. Should + * only be used on lists that are not concurrently modified. + */ +struct percpu_list_node *__percpu_list_pop(struct percpu_list *list, int cpu) +{ + struct percpu_list_node *node; + + node = list->c[cpu].head; + if (!node) + return NULL; + list->c[cpu].head = node->next; + return node; +} + +void *test_percpu_list_thread(void *arg) +{ + long long i, reps; + struct percpu_list *list = (struct percpu_list *)arg; + + if (!opt_disable_rseq && rseq_register_current_thread()) + abort(); + + reps = opt_reps; + for (i = 0; i < reps; i++) { + struct percpu_list_node *node; + + node = this_cpu_list_pop(list, NULL); + if (opt_yield) + sched_yield(); /* encourage shuffling */ + if (node) + this_cpu_list_push(list, node, NULL); + } + + printf_verbose("tid %d: number of rseq abort: %d, signals delivered: %u\n", + (int) gettid(), nr_abort, signals_delivered); + if (!opt_disable_rseq && rseq_unregister_current_thread()) + abort(); + + return NULL; +} + +/* Simultaneous modification to a per-cpu linked list from many threads. */ +void test_percpu_list(void) +{ + const int num_threads = opt_threads; + int i, j, ret; + uint64_t sum = 0, expected_sum = 0; + struct percpu_list list; + pthread_t test_threads[num_threads]; + cpu_set_t allowed_cpus; + + memset(&list, 0, sizeof(list)); + + /* Generate list entries for every usable cpu. */ + sched_getaffinity(0, sizeof(allowed_cpus), &allowed_cpus); + for (i = 0; i < CPU_SETSIZE; i++) { + if (!CPU_ISSET(i, &allowed_cpus)) + continue; + for (j = 1; j <= 100; j++) { + struct percpu_list_node *node; + + expected_sum += j; + + node = malloc(sizeof(*node)); + assert(node); + node->data = j; + node->next = list.c[i].head; + list.c[i].head = node; + } + } + + for (i = 0; i < num_threads; i++) { + ret = pthread_create(&test_threads[i], NULL, + test_percpu_list_thread, &list); + if (ret) { + errno = ret; + perror("pthread_create"); + abort(); + } + } + + for (i = 0; i < num_threads; i++) { + ret = pthread_join(test_threads[i], NULL); + if (ret) { + errno = ret; + perror("pthread_join"); + abort(); + } + } + + for (i = 0; i < CPU_SETSIZE; i++) { + struct percpu_list_node *node; + + if (!CPU_ISSET(i, &allowed_cpus)) + continue; + + while ((node = __percpu_list_pop(&list, i))) { + sum += node->data; + free(node); + } + } + + /* + * All entries should now be accounted for (unless some external + * actor is interfering with our allowed affinity while this + * test is running). + */ + assert(sum == expected_sum); +} + +bool this_cpu_buffer_push(struct percpu_buffer *buffer, + struct percpu_buffer_node *node, + int *_cpu) +{ + bool result = false; + int cpu; + + for (;;) { + intptr_t *targetptr_spec, newval_spec; + intptr_t *targetptr_final, newval_final; + intptr_t offset; + int ret; + + cpu = rseq_cpu_start(); + offset = RSEQ_READ_ONCE(buffer->c[cpu].offset); + if (offset == buffer->c[cpu].buflen) + break; + newval_spec = (intptr_t)node; + targetptr_spec = (intptr_t *)&buffer->c[cpu].array[offset]; + newval_final = offset + 1; + targetptr_final = &buffer->c[cpu].offset; + if (opt_mb) + ret = rseq_cmpeqv_trystorev_storev_release( + targetptr_final, offset, targetptr_spec, + newval_spec, newval_final, cpu); + else + ret = rseq_cmpeqv_trystorev_storev(targetptr_final, + offset, targetptr_spec, newval_spec, + newval_final, cpu); + if (rseq_likely(!ret)) { + result = true; + break; + } + /* Retry if comparison fails or rseq aborts. */ + } + if (_cpu) + *_cpu = cpu; + return result; +} + +struct percpu_buffer_node *this_cpu_buffer_pop(struct percpu_buffer *buffer, + int *_cpu) +{ + struct percpu_buffer_node *head; + int cpu; + + for (;;) { + intptr_t *targetptr, newval; + intptr_t offset; + int ret; + + cpu = rseq_cpu_start(); + /* Load offset with single-copy atomicity. */ + offset = RSEQ_READ_ONCE(buffer->c[cpu].offset); + if (offset == 0) { + head = NULL; + break; + } + head = RSEQ_READ_ONCE(buffer->c[cpu].array[offset - 1]); + newval = offset - 1; + targetptr = (intptr_t *)&buffer->c[cpu].offset; + ret = rseq_cmpeqv_cmpeqv_storev(targetptr, offset, + (intptr_t *)&buffer->c[cpu].array[offset - 1], + (intptr_t)head, newval, cpu); + if (rseq_likely(!ret)) + break; + /* Retry if comparison fails or rseq aborts. */ + } + if (_cpu) + *_cpu = cpu; + return head; +} + +/* + * __percpu_buffer_pop is not safe against concurrent accesses. Should + * only be used on buffers that are not concurrently modified. + */ +struct percpu_buffer_node *__percpu_buffer_pop(struct percpu_buffer *buffer, + int cpu) +{ + struct percpu_buffer_node *head; + intptr_t offset; + + offset = buffer->c[cpu].offset; + if (offset == 0) + return NULL; + head = buffer->c[cpu].array[offset - 1]; + buffer->c[cpu].offset = offset - 1; + return head; +} + +void *test_percpu_buffer_thread(void *arg) +{ + long long i, reps; + struct percpu_buffer *buffer = (struct percpu_buffer *)arg; + + if (!opt_disable_rseq && rseq_register_current_thread()) + abort(); + + reps = opt_reps; + for (i = 0; i < reps; i++) { + struct percpu_buffer_node *node; + + node = this_cpu_buffer_pop(buffer, NULL); + if (opt_yield) + sched_yield(); /* encourage shuffling */ + if (node) { + if (!this_cpu_buffer_push(buffer, node, NULL)) { + /* Should increase buffer size. */ + abort(); + } + } + } + + printf_verbose("tid %d: number of rseq abort: %d, signals delivered: %u\n", + (int) gettid(), nr_abort, signals_delivered); + if (!opt_disable_rseq && rseq_unregister_current_thread()) + abort(); + + return NULL; +} + +/* Simultaneous modification to a per-cpu buffer from many threads. */ +void test_percpu_buffer(void) +{ + const int num_threads = opt_threads; + int i, j, ret; + uint64_t sum = 0, expected_sum = 0; + struct percpu_buffer buffer; + pthread_t test_threads[num_threads]; + cpu_set_t allowed_cpus; + + memset(&buffer, 0, sizeof(buffer)); + + /* Generate list entries for every usable cpu. */ + sched_getaffinity(0, sizeof(allowed_cpus), &allowed_cpus); + for (i = 0; i < CPU_SETSIZE; i++) { + if (!CPU_ISSET(i, &allowed_cpus)) + continue; + /* Worse-case is every item in same CPU. */ + buffer.c[i].array = + malloc(sizeof(*buffer.c[i].array) * CPU_SETSIZE * + BUFFER_ITEM_PER_CPU); + assert(buffer.c[i].array); + buffer.c[i].buflen = CPU_SETSIZE * BUFFER_ITEM_PER_CPU; + for (j = 1; j <= BUFFER_ITEM_PER_CPU; j++) { + struct percpu_buffer_node *node; + + expected_sum += j; + + /* + * We could theoretically put the word-sized + * "data" directly in the buffer. However, we + * want to model objects that would not fit + * within a single word, so allocate an object + * for each node. + */ + node = malloc(sizeof(*node)); + assert(node); + node->data = j; + buffer.c[i].array[j - 1] = node; + buffer.c[i].offset++; + } + } + + for (i = 0; i < num_threads; i++) { + ret = pthread_create(&test_threads[i], NULL, + test_percpu_buffer_thread, &buffer); + if (ret) { + errno = ret; + perror("pthread_create"); + abort(); + } + } + + for (i = 0; i < num_threads; i++) { + ret = pthread_join(test_threads[i], NULL); + if (ret) { + errno = ret; + perror("pthread_join"); + abort(); + } + } + + for (i = 0; i < CPU_SETSIZE; i++) { + struct percpu_buffer_node *node; + + if (!CPU_ISSET(i, &allowed_cpus)) + continue; + + while ((node = __percpu_buffer_pop(&buffer, i))) { + sum += node->data; + free(node); + } + free(buffer.c[i].array); + } + + /* + * All entries should now be accounted for (unless some external + * actor is interfering with our allowed affinity while this + * test is running). + */ + assert(sum == expected_sum); +} + +bool this_cpu_memcpy_buffer_push(struct percpu_memcpy_buffer *buffer, + struct percpu_memcpy_buffer_node item, + int *_cpu) +{ + bool result = false; + int cpu; + + for (;;) { + intptr_t *targetptr_final, newval_final, offset; + char *destptr, *srcptr; + size_t copylen; + int ret; + + cpu = rseq_cpu_start(); + /* Load offset with single-copy atomicity. */ + offset = RSEQ_READ_ONCE(buffer->c[cpu].offset); + if (offset == buffer->c[cpu].buflen) + break; + destptr = (char *)&buffer->c[cpu].array[offset]; + srcptr = (char *)&item; + /* copylen must be <= 4kB. */ + copylen = sizeof(item); + newval_final = offset + 1; + targetptr_final = &buffer->c[cpu].offset; + if (opt_mb) + ret = rseq_cmpeqv_trymemcpy_storev_release( + targetptr_final, offset, + destptr, srcptr, copylen, + newval_final, cpu); + else + ret = rseq_cmpeqv_trymemcpy_storev(targetptr_final, + offset, destptr, srcptr, copylen, + newval_final, cpu); + if (rseq_likely(!ret)) { + result = true; + break; + } + /* Retry if comparison fails or rseq aborts. */ + } + if (_cpu) + *_cpu = cpu; + return result; +} + +bool this_cpu_memcpy_buffer_pop(struct percpu_memcpy_buffer *buffer, + struct percpu_memcpy_buffer_node *item, + int *_cpu) +{ + bool result = false; + int cpu; + + for (;;) { + intptr_t *targetptr_final, newval_final, offset; + char *destptr, *srcptr; + size_t copylen; + int ret; + + cpu = rseq_cpu_start(); + /* Load offset with single-copy atomicity. */ + offset = RSEQ_READ_ONCE(buffer->c[cpu].offset); + if (offset == 0) + break; + destptr = (char *)item; + srcptr = (char *)&buffer->c[cpu].array[offset - 1]; + /* copylen must be <= 4kB. */ + copylen = sizeof(*item); + newval_final = offset - 1; + targetptr_final = &buffer->c[cpu].offset; + ret = rseq_cmpeqv_trymemcpy_storev(targetptr_final, + offset, destptr, srcptr, copylen, + newval_final, cpu); + if (rseq_likely(!ret)) { + result = true; + break; + } + /* Retry if comparison fails or rseq aborts. */ + } + if (_cpu) + *_cpu = cpu; + return result; +} + +/* + * __percpu_memcpy_buffer_pop is not safe against concurrent accesses. Should + * only be used on buffers that are not concurrently modified. + */ +bool __percpu_memcpy_buffer_pop(struct percpu_memcpy_buffer *buffer, + struct percpu_memcpy_buffer_node *item, + int cpu) +{ + intptr_t offset; + + offset = buffer->c[cpu].offset; + if (offset == 0) + return false; + memcpy(item, &buffer->c[cpu].array[offset - 1], sizeof(*item)); + buffer->c[cpu].offset = offset - 1; + return true; +} + +void *test_percpu_memcpy_buffer_thread(void *arg) +{ + long long i, reps; + struct percpu_memcpy_buffer *buffer = (struct percpu_memcpy_buffer *)arg; + + if (!opt_disable_rseq && rseq_register_current_thread()) + abort(); + + reps = opt_reps; + for (i = 0; i < reps; i++) { + struct percpu_memcpy_buffer_node item; + bool result; + + result = this_cpu_memcpy_buffer_pop(buffer, &item, NULL); + if (opt_yield) + sched_yield(); /* encourage shuffling */ + if (result) { + if (!this_cpu_memcpy_buffer_push(buffer, item, NULL)) { + /* Should increase buffer size. */ + abort(); + } + } + } + + printf_verbose("tid %d: number of rseq abort: %d, signals delivered: %u\n", + (int) gettid(), nr_abort, signals_delivered); + if (!opt_disable_rseq && rseq_unregister_current_thread()) + abort(); + + return NULL; +} + +/* Simultaneous modification to a per-cpu buffer from many threads. */ +void test_percpu_memcpy_buffer(void) +{ + const int num_threads = opt_threads; + int i, j, ret; + uint64_t sum = 0, expected_sum = 0; + struct percpu_memcpy_buffer buffer; + pthread_t test_threads[num_threads]; + cpu_set_t allowed_cpus; + + memset(&buffer, 0, sizeof(buffer)); + + /* Generate list entries for every usable cpu. */ + sched_getaffinity(0, sizeof(allowed_cpus), &allowed_cpus); + for (i = 0; i < CPU_SETSIZE; i++) { + if (!CPU_ISSET(i, &allowed_cpus)) + continue; + /* Worse-case is every item in same CPU. */ + buffer.c[i].array = + malloc(sizeof(*buffer.c[i].array) * CPU_SETSIZE * + MEMCPY_BUFFER_ITEM_PER_CPU); + assert(buffer.c[i].array); + buffer.c[i].buflen = CPU_SETSIZE * MEMCPY_BUFFER_ITEM_PER_CPU; + for (j = 1; j <= MEMCPY_BUFFER_ITEM_PER_CPU; j++) { + expected_sum += 2 * j + 1; + + /* + * We could theoretically put the word-sized + * "data" directly in the buffer. However, we + * want to model objects that would not fit + * within a single word, so allocate an object + * for each node. + */ + buffer.c[i].array[j - 1].data1 = j; + buffer.c[i].array[j - 1].data2 = j + 1; + buffer.c[i].offset++; + } + } + + for (i = 0; i < num_threads; i++) { + ret = pthread_create(&test_threads[i], NULL, + test_percpu_memcpy_buffer_thread, + &buffer); + if (ret) { + errno = ret; + perror("pthread_create"); + abort(); + } + } + + for (i = 0; i < num_threads; i++) { + ret = pthread_join(test_threads[i], NULL); + if (ret) { + errno = ret; + perror("pthread_join"); + abort(); + } + } + + for (i = 0; i < CPU_SETSIZE; i++) { + struct percpu_memcpy_buffer_node item; + + if (!CPU_ISSET(i, &allowed_cpus)) + continue; + + while (__percpu_memcpy_buffer_pop(&buffer, &item, i)) { + sum += item.data1; + sum += item.data2; + } + free(buffer.c[i].array); + } + + /* + * All entries should now be accounted for (unless some external + * actor is interfering with our allowed affinity while this + * test is running). + */ + assert(sum == expected_sum); +} + +static void test_signal_interrupt_handler(int signo) +{ + signals_delivered++; +} + +static int set_signal_handler(void) +{ + int ret = 0; + struct sigaction sa; + sigset_t sigset; + + ret = sigemptyset(&sigset); + if (ret < 0) { + perror("sigemptyset"); + return ret; + } + + sa.sa_handler = test_signal_interrupt_handler; + sa.sa_mask = sigset; + sa.sa_flags = 0; + ret = sigaction(SIGUSR1, &sa, NULL); + if (ret < 0) { + perror("sigaction"); + return ret; + } + + printf_verbose("Signal handler set for SIGUSR1\n"); + + return ret; +} + +static void show_usage(int argc, char **argv) +{ + printf("Usage : %s <OPTIONS>\n", + argv[0]); + printf("OPTIONS:\n"); + printf(" [-1 loops] Number of loops for delay injection 1\n"); + printf(" [-2 loops] Number of loops for delay injection 2\n"); + printf(" [-3 loops] Number of loops for delay injection 3\n"); + printf(" [-4 loops] Number of loops for delay injection 4\n"); + printf(" [-5 loops] Number of loops for delay injection 5\n"); + printf(" [-6 loops] Number of loops for delay injection 6\n"); + printf(" [-7 loops] Number of loops for delay injection 7 (-1 to enable -m)\n"); + printf(" [-8 loops] Number of loops for delay injection 8 (-1 to enable -m)\n"); + printf(" [-9 loops] Number of loops for delay injection 9 (-1 to enable -m)\n"); + printf(" [-m N] Yield/sleep/kill every modulo N (default 0: disabled) (>= 0)\n"); + printf(" [-y] Yield\n"); + printf(" [-k] Kill thread with signal\n"); + printf(" [-s S] S: =0: disabled (default), >0: sleep time (ms)\n"); + printf(" [-t N] Number of threads (default 200)\n"); + printf(" [-r N] Number of repetitions per thread (default 5000)\n"); + printf(" [-d] Disable rseq system call (no initialization)\n"); + printf(" [-D M] Disable rseq for each M threads\n"); + printf(" [-T test] Choose test: (s)pinlock, (l)ist, (b)uffer, (m)emcpy, (i)ncrement\n"); + printf(" [-M] Push into buffer and memcpy buffer with memory barriers.\n"); + printf(" [-v] Verbose output.\n"); + printf(" [-h] Show this help.\n"); + printf("\n"); +} + +int main(int argc, char **argv) +{ + int i; + + for (i = 1; i < argc; i++) { + if (argv[i][0] != '-') + continue; + switch (argv[i][1]) { + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + case '8': + case '9': + if (argc < i + 2) { + show_usage(argc, argv); + goto error; + } + loop_cnt[argv[i][1] - '0'] = atol(argv[i + 1]); + i++; + break; + case 'm': + if (argc < i + 2) { + show_usage(argc, argv); + goto error; + } + opt_modulo = atol(argv[i + 1]); + if (opt_modulo < 0) { + show_usage(argc, argv); + goto error; + } + i++; + break; + case 's': + if (argc < i + 2) { + show_usage(argc, argv); + goto error; + } + opt_sleep = atol(argv[i + 1]); + if (opt_sleep < 0) { + show_usage(argc, argv); + goto error; + } + i++; + break; + case 'y': + opt_yield = 1; + break; + case 'k': + opt_signal = 1; + break; + case 'd': + opt_disable_rseq = 1; + break; + case 'D': + if (argc < i + 2) { + show_usage(argc, argv); + goto error; + } + opt_disable_mod = atol(argv[i + 1]); + if (opt_disable_mod < 0) { + show_usage(argc, argv); + goto error; + } + i++; + break; + case 't': + if (argc < i + 2) { + show_usage(argc, argv); + goto error; + } + opt_threads = atol(argv[i + 1]); + if (opt_threads < 0) { + show_usage(argc, argv); + goto error; + } + i++; + break; + case 'r': + if (argc < i + 2) { + show_usage(argc, argv); + goto error; + } + opt_reps = atoll(argv[i + 1]); + if (opt_reps < 0) { + show_usage(argc, argv); + goto error; + } + i++; + break; + case 'h': + show_usage(argc, argv); + goto end; + case 'T': + if (argc < i + 2) { + show_usage(argc, argv); + goto error; + } + opt_test = *argv[i + 1]; + switch (opt_test) { + case 's': + case 'l': + case 'i': + case 'b': + case 'm': + break; + default: + show_usage(argc, argv); + goto error; + } + i++; + break; + case 'v': + verbose = 1; + break; + case 'M': + opt_mb = 1; + break; + default: + show_usage(argc, argv); + goto error; + } + } + + loop_cnt_1 = loop_cnt[1]; + loop_cnt_2 = loop_cnt[2]; + loop_cnt_3 = loop_cnt[3]; + loop_cnt_4 = loop_cnt[4]; + loop_cnt_5 = loop_cnt[5]; + loop_cnt_6 = loop_cnt[6]; + + if (set_signal_handler()) + goto error; + + if (!opt_disable_rseq && rseq_register_current_thread()) + goto error; + switch (opt_test) { + case 's': + printf_verbose("spinlock\n"); + test_percpu_spinlock(); + break; + case 'l': + printf_verbose("linked list\n"); + test_percpu_list(); + break; + case 'b': + printf_verbose("buffer\n"); + test_percpu_buffer(); + break; + case 'm': + printf_verbose("memcpy buffer\n"); + test_percpu_memcpy_buffer(); + break; + case 'i': + printf_verbose("counter increment\n"); + test_percpu_inc(); + break; + } + if (!opt_disable_rseq && rseq_unregister_current_thread()) + abort(); +end: + return 0; + +error: + return -1; +} -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 6 months

1
0
0 0

[RFC PATCH for 4.18 14/16] rseq: selftests: Provide basic percpu ops test (v2)

by Mathieu Desnoyers

"basic_percpu_ops_test" is a slightly more "realistic" variant, implementing a few simple per-cpu operations and testing their correctness. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> CC: Shuah Khan <shuahkh(a)osg.samsung.com> CC: Russell King <linux(a)arm.linux.org.uk> CC: Catalin Marinas <catalin.marinas(a)arm.com> CC: Will Deacon <will.deacon(a)arm.com> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Paul Turner <pjt(a)google.com> CC: Andrew Hunter <ahh(a)google.com> CC: Peter Zijlstra <peterz(a)infradead.org> CC: Andy Lutomirski <luto(a)amacapital.net> CC: Andi Kleen <andi(a)firstfloor.org> CC: Dave Watson <davejwatson(a)fb.com> CC: Chris Lameter <cl(a)linux.com> CC: Ingo Molnar <mingo(a)redhat.com> CC: "H. Peter Anvin" <hpa(a)zytor.com> CC: Ben Maurer <bmaurer(a)fb.com> CC: Steven Rostedt <rostedt(a)goodmis.org> CC: "Paul E. McKenney" <paulmck(a)linux.vnet.ibm.com> CC: Josh Triplett <josh(a)joshtriplett.org> CC: Linus Torvalds <torvalds(a)linux-foundation.org> CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: linux-kselftest(a)vger.kernel.org CC: linux-api(a)vger.kernel.org --- Changes since v1: - Use only rseq, remove use of cpu_opv system call. --- .../testing/selftests/rseq/basic_percpu_ops_test.c | 313 +++++++++++++++++++++ 1 file changed, 313 insertions(+) create mode 100644 tools/testing/selftests/rseq/basic_percpu_ops_test.c diff --git a/tools/testing/selftests/rseq/basic_percpu_ops_test.c b/tools/testing/selftests/rseq/basic_percpu_ops_test.c new file mode 100644 index 000000000000..96ef27905879 --- /dev/null +++ b/tools/testing/selftests/rseq/basic_percpu_ops_test.c @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: LGPL-2.1 +#define _GNU_SOURCE +#include <assert.h> +#include <pthread.h> +#include <sched.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <stddef.h> + +#include "rseq.h" + +#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) + +struct percpu_lock_entry { + intptr_t v; +} __attribute__((aligned(128))); + +struct percpu_lock { + struct percpu_lock_entry c[CPU_SETSIZE]; +}; + +struct test_data_entry { + intptr_t count; +} __attribute__((aligned(128))); + +struct spinlock_test_data { + struct percpu_lock lock; + struct test_data_entry c[CPU_SETSIZE]; + int reps; +}; + +struct percpu_list_node { + intptr_t data; + struct percpu_list_node *next; +}; + +struct percpu_list_entry { + struct percpu_list_node *head; +} __attribute__((aligned(128))); + +struct percpu_list { + struct percpu_list_entry c[CPU_SETSIZE]; +}; + +/* A simple percpu spinlock. Returns the cpu lock was acquired on. */ +int rseq_this_cpu_lock(struct percpu_lock *lock) +{ + int cpu; + + for (;;) { + int ret; + + cpu = rseq_cpu_start(); + ret = rseq_cmpeqv_storev(&lock->c[cpu].v, + 0, 1, cpu); + if (rseq_likely(!ret)) + break; + /* Retry if comparison fails or rseq aborts. */ + } + /* + * Acquire semantic when taking lock after control dependency. + * Matches rseq_smp_store_release(). + */ + rseq_smp_acquire__after_ctrl_dep(); + return cpu; +} + +void rseq_percpu_unlock(struct percpu_lock *lock, int cpu) +{ + assert(lock->c[cpu].v == 1); + /* + * Release lock, with release semantic. Matches + * rseq_smp_acquire__after_ctrl_dep(). + */ + rseq_smp_store_release(&lock->c[cpu].v, 0); +} + +void *test_percpu_spinlock_thread(void *arg) +{ + struct spinlock_test_data *data = arg; + int i, cpu; + + if (rseq_register_current_thread()) { + fprintf(stderr, "Error: rseq_register_current_thread(...) failed(%d): %s\n", + errno, strerror(errno)); + abort(); + } + for (i = 0; i < data->reps; i++) { + cpu = rseq_this_cpu_lock(&data->lock); + data->c[cpu].count++; + rseq_percpu_unlock(&data->lock, cpu); + } + if (rseq_unregister_current_thread()) { + fprintf(stderr, "Error: rseq_unregister_current_thread(...) failed(%d): %s\n", + errno, strerror(errno)); + abort(); + } + + return NULL; +} + +/* + * A simple test which implements a sharded counter using a per-cpu + * lock. Obviously real applications might prefer to simply use a + * per-cpu increment; however, this is reasonable for a test and the + * lock can be extended to synchronize more complicated operations. + */ +void test_percpu_spinlock(void) +{ + const int num_threads = 200; + int i; + uint64_t sum; + pthread_t test_threads[num_threads]; + struct spinlock_test_data data; + + memset(&data, 0, sizeof(data)); + data.reps = 5000; + + for (i = 0; i < num_threads; i++) + pthread_create(&test_threads[i], NULL, + test_percpu_spinlock_thread, &data); + + for (i = 0; i < num_threads; i++) + pthread_join(test_threads[i], NULL); + + sum = 0; + for (i = 0; i < CPU_SETSIZE; i++) + sum += data.c[i].count; + + assert(sum == (uint64_t)data.reps * num_threads); +} + +void this_cpu_list_push(struct percpu_list *list, + struct percpu_list_node *node, + int *_cpu) +{ + int cpu; + + for (;;) { + intptr_t *targetptr, newval, expect; + int ret; + + cpu = rseq_cpu_start(); + /* Load list->c[cpu].head with single-copy atomicity. */ + expect = (intptr_t)RSEQ_READ_ONCE(list->c[cpu].head); + newval = (intptr_t)node; + targetptr = (intptr_t *)&list->c[cpu].head; + node->next = (struct percpu_list_node *)expect; + ret = rseq_cmpeqv_storev(targetptr, expect, newval, cpu); + if (rseq_likely(!ret)) + break; + /* Retry if comparison fails or rseq aborts. */ + } + if (_cpu) + *_cpu = cpu; +} + +/* + * Unlike a traditional lock-less linked list; the availability of a + * rseq primitive allows us to implement pop without concerns over + * ABA-type races. + */ +struct percpu_list_node *this_cpu_list_pop(struct percpu_list *list, + int *_cpu) +{ + for (;;) { + struct percpu_list_node *head; + intptr_t *targetptr, expectnot, *load; + off_t offset; + int ret, cpu; + + cpu = rseq_cpu_start(); + targetptr = (intptr_t *)&list->c[cpu].head; + expectnot = (intptr_t)NULL; + offset = offsetof(struct percpu_list_node, next); + load = (intptr_t *)&head; + ret = rseq_cmpnev_storeoffp_load(targetptr, expectnot, + offset, load, cpu); + if (rseq_likely(!ret)) { + if (_cpu) + *_cpu = cpu; + return head; + } + if (ret > 0) + return NULL; + /* Retry if rseq aborts. */ + } +} + +/* + * __percpu_list_pop is not safe against concurrent accesses. Should + * only be used on lists that are not concurrently modified. + */ +struct percpu_list_node *__percpu_list_pop(struct percpu_list *list, int cpu) +{ + struct percpu_list_node *node; + + node = list->c[cpu].head; + if (!node) + return NULL; + list->c[cpu].head = node->next; + return node; +} + +void *test_percpu_list_thread(void *arg) +{ + int i; + struct percpu_list *list = (struct percpu_list *)arg; + + if (rseq_register_current_thread()) { + fprintf(stderr, "Error: rseq_register_current_thread(...) failed(%d): %s\n", + errno, strerror(errno)); + abort(); + } + + for (i = 0; i < 100000; i++) { + struct percpu_list_node *node; + + node = this_cpu_list_pop(list, NULL); + sched_yield(); /* encourage shuffling */ + if (node) + this_cpu_list_push(list, node, NULL); + } + + if (rseq_unregister_current_thread()) { + fprintf(stderr, "Error: rseq_unregister_current_thread(...) failed(%d): %s\n", + errno, strerror(errno)); + abort(); + } + + return NULL; +} + +/* Simultaneous modification to a per-cpu linked list from many threads. */ +void test_percpu_list(void) +{ + int i, j; + uint64_t sum = 0, expected_sum = 0; + struct percpu_list list; + pthread_t test_threads[200]; + cpu_set_t allowed_cpus; + + memset(&list, 0, sizeof(list)); + + /* Generate list entries for every usable cpu. */ + sched_getaffinity(0, sizeof(allowed_cpus), &allowed_cpus); + for (i = 0; i < CPU_SETSIZE; i++) { + if (!CPU_ISSET(i, &allowed_cpus)) + continue; + for (j = 1; j <= 100; j++) { + struct percpu_list_node *node; + + expected_sum += j; + + node = malloc(sizeof(*node)); + assert(node); + node->data = j; + node->next = list.c[i].head; + list.c[i].head = node; + } + } + + for (i = 0; i < 200; i++) + pthread_create(&test_threads[i], NULL, + test_percpu_list_thread, &list); + + for (i = 0; i < 200; i++) + pthread_join(test_threads[i], NULL); + + for (i = 0; i < CPU_SETSIZE; i++) { + struct percpu_list_node *node; + + if (!CPU_ISSET(i, &allowed_cpus)) + continue; + + while ((node = __percpu_list_pop(&list, i))) { + sum += node->data; + free(node); + } + } + + /* + * All entries should now be accounted for (unless some external + * actor is interfering with our allowed affinity while this + * test is running). + */ + assert(sum == expected_sum); +} + +int main(int argc, char **argv) +{ + if (rseq_register_current_thread()) { + fprintf(stderr, "Error: rseq_register_current_thread(...) failed(%d): %s\n", + errno, strerror(errno)); + goto error; + } + printf("spinlock\n"); + test_percpu_spinlock(); + printf("percpu_list\n"); + test_percpu_list(); + if (rseq_unregister_current_thread()) { + fprintf(stderr, "Error: rseq_unregister_current_thread(...) failed(%d): %s\n", + errno, strerror(errno)); + goto error; + } + return 0; + +error: + return -1; +} + -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 6 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror