- Linux-kselftest-mirror - lists.linaro.org

[PATCH net-next v2 4/5] selftests: test_vxlan_fdb_changelink: Convert to lib.sh

by Petr Machata

Instead of inlining equivalents, use lib.sh-provided primitives. Use defer to manage vx lifetime. This will make it easier to extend the test in the next patch. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor(a)blackwall.org> --- Notes: CC: Simon Horman <horms(a)kernel.org> CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org .../net/test_vxlan_fdb_changelink.sh | 39 ++++++++++++------- 1 file changed, 24 insertions(+), 15 deletions(-) diff --git a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh index 2d442cdab11e..6f2bca4b346c 100755 --- a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh +++ b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh @@ -1,29 +1,38 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -# Check FDB default-remote handling across "ip link set". +ALL_TESTS=" + test_set_remote +" +source lib.sh check_remotes() { local what=$1; shift local N=$(bridge fdb sh dev vx | grep 00:00:00:00:00:00 | wc -l) - echo -ne "expected two remotes after $what\t" - if [[ $N != 2 ]]; then - echo "[FAIL]" - EXIT_STATUS=1 - else - echo "[ OK ]" - fi + ((N == 2)) + check_err $? "expected 2 remotes after $what, got $N" } -ip link add name vx up type vxlan id 2000 dstport 4789 -bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent -bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent -check_remotes "fdb append" +# Check FDB default-remote handling across "ip link set". +test_set_remote() +{ + RET=0 -ip link set dev vx type vxlan remote 192.0.2.30 -check_remotes "link set" + ip_link_add vx up type vxlan id 2000 dstport 4789 + bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent + bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent + check_remotes "fdb append" + + ip link set dev vx type vxlan remote 192.0.2.30 + check_remotes "link set" + + log_test 'FDB default-remote handling across "ip link set"' +} + +trap defer_scopes_cleanup EXIT + +tests_run -ip link del dev vx exit $EXIT_STATUS -- 2.47.0

4 months, 2 weeks

1
0
0 0

[PATCH net-next v2 3/5] selftests: forwarding: lib: Move require_command to net, generalize

by Petr Machata

This helper could be useful to more than just forwarding tests. Move it upstairs and port over to log_test_skip(). Split the function into two parts: the bit that actually checks and reports skip, which is in a new function check_command(). And a bit that exits the test script if the check fails. This allows users consistent checking behavior while giving an option to bail out from a single test without bailing out of the whole script. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor(a)blackwall.org> --- Notes: CC: Simon Horman <horms(a)kernel.org> CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org tools/testing/selftests/net/forwarding/lib.sh | 10 ---------- tools/testing/selftests/net/lib.sh | 19 +++++++++++++++++++ 2 files changed, 19 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 8de80acf249e..508f3c700d71 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -291,16 +291,6 @@ if [[ "$CHECK_TC" = "yes" ]]; then check_tc_version fi -require_command() -{ - local cmd=$1; shift - - if [[ ! -x "$(command -v "$cmd")" ]]; then - echo "SKIP: $cmd not installed" - exit $ksft_skip - fi -} - # IPv6 support was added in v3.0 check_mtools_version() { diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index 0bd9a038a1f0..975be4fdbcdb 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -450,6 +450,25 @@ kill_process() { kill $pid && wait $pid; } 2>/dev/null } +check_command() +{ + local cmd=$1; shift + + if [[ ! -x "$(command -v "$cmd")" ]]; then + log_test_skip "$cmd not installed" + return $EXIT_STATUS + fi +} + +require_command() +{ + local cmd=$1; shift + + if ! check_command "$cmd"; then + exit $EXIT_STATUS + fi +} + ip_link_add() { local name=$1; shift -- 2.47.0

4 months, 2 weeks

1
0
0 0

[PATCH v7 0/3] scanf: convert self-test to KUnit

by Tamir Duberstein

This is one of just 3 remaining "Test Module" kselftests (the others being bitmap and printf), the rest having been converted to KUnit. In addition to the enclosed patch, please consider this an RFC on the removal of the "Test Module" kselftest machinery. I tested this using: $ tools/testing/kunit/kunit.py run --arch arm64 --make_options LLVM=1 scanf Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v7: - Remove redundant debug logs. (Petr Mladek) - Drop Petr's Acked-by. - Use original test assertions as KUNIT_*_EQ_MSG produces hard-to-parse messages. The new failure output is: vsscanf("0 1e 3e43 31f0 0 0 5797 9c70", "%1hx %2hx %4hx %4hx %1hx %1hx %4hx %4hx", ...) expected 837828163 got 1044578334 not ok 1 " " # numbers_list_field_width_val_width: ASSERTION FAILED at lib/scanf_kunit.c:92 vsscanf("dc2:1c:0:3531:2621:5172:1:7", "%3hx:%2hx:%1hx:%4hx:%4hx:%4hx:%1hx:%1hx", ...) expected 892403712 got 28 not ok 2 ":" # numbers_list_field_width_val_width: ASSERTION FAILED at lib/scanf_kunit.c:92 vsscanf("e083,8f6e,b,70ca,1,1,aab1,10e4", "%4hx,%4hx,%1hx,%4hx,%1hx,%1hx,%4hx,%4hx", ...) expected 1892286475 got 757614 not ok 3 "," # numbers_list_field_width_val_width: ASSERTION FAILED at lib/scanf_kunit.c:92 vsscanf("2e72-8435-1-2fc-7cbd-c2f1-7158-2b41", "%4hx-%4hx-%1hx-%3hx-%4hx-%4hx-%4hx-%4hx", ...) expected 50069505 got 99381 not ok 4 "-" # numbers_list_field_width_val_width: ASSERTION FAILED at lib/scanf_kunit.c:92 vsscanf("403/0/17/1/11e7/1/1fe8/34ba", "%3hx/%1hx/%2hx/%1hx/%4hx/%1hx/%4hx/%4hx", ...) expected 65559 got 1507328 not ok 5 "/" # numbers_list_field_width_val_width: pass:0 fail:5 skip:0 total:5 not ok 4 numbers_list_field_width_val_width # numbers_slice: ASSERTION FAILED at lib/scanf_kunit.c:92 vsscanf("3c87eac0f4afa1f9231da52", "%1hx%4hx%4hx%4hx%1hx%4hx%4hx%1hx", ...) expected 1257942031 got 2886715518 - Link to v6: https://lore.kernel.org/r/20250210-scanf-kunit-convert-v6-0-4d583d07f92d@gm… Changes in v6: - s/at boot/at runtime/ for consistency with the printf series. - Go back to kmalloc. (Geert Uytterhoeven) - Link to v5: https://lore.kernel.org/r/20250210-scanf-kunit-convert-v5-0-8e64f3a7de99@gm… Changes in v5: - Remove extraneous trailing newlines from failure messages. - Replace `pr_debug` with `kunit_printk`. - Use static char arrays instead of kmalloc. - Drop KUnit boilerplate from CONFIG_SCANF_KUNIT_TEST help text. - Drop arch changes. - Link to v4: https://lore.kernel.org/r/20250207-scanf-kunit-convert-v4-0-a23e2afaede8@gm… Changes in v4: - Bake `test` into various macros, greatly reducing diff noise. - Revert control flow changes. - Link to v3: https://lore.kernel.org/r/20250204-scanf-kunit-convert-v3-0-386d7c3ee714@gm… Changes in v3: - Reduce diff noise in lib/Makefile. (Petr Mladek) - Split `scanf_test` into a few test cases. New output: : =================== scanf (10 subtests) ==================== : [PASSED] numbers_simple : ====================== numbers_list ======================= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ================== [PASSED] numbers_list =================== : ============ numbers_list_field_width_typemax ============= : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======== [PASSED] numbers_list_field_width_typemax ========= : =========== numbers_list_field_width_val_width ============ : [PASSED] delim=" " : [PASSED] delim=":" : [PASSED] delim="," : [PASSED] delim="-" : [PASSED] delim="/" : ======= [PASSED] numbers_list_field_width_val_width ======== : [PASSED] numbers_slice : [PASSED] numbers_prefix_overflow : [PASSED] test_simple_strtoull : [PASSED] test_simple_strtoll : [PASSED] test_simple_strtoul : [PASSED] test_simple_strtol : ====================== [PASSED] scanf ====================== : ============================================================ : Testing complete. Ran 22 tests: passed: 22 : Elapsed time: 5.517s total, 0.001s configuring, 5.440s building, 0.067s running - Link to v2: https://lore.kernel.org/r/20250203-scanf-kunit-convert-v2-1-277a618d804e@gm… Changes in v2: - Rename lib/{test_scanf.c => scanf_kunit.c}. (Andy Shevchenko) - Link to v1: https://lore.kernel.org/r/20250131-scanf-kunit-convert-v1-1-0976524f0eba@gm… --- Tamir Duberstein (3): scanf: remove redundant debug logs scanf: convert self-test to KUnit scanf: break kunit into test cases MAINTAINERS | 2 +- lib/Kconfig.debug | 12 +- lib/Makefile | 2 +- lib/{test_scanf.c => scanf_kunit.c} | 270 +++++++++++++++++------------------ tools/testing/selftests/lib/Makefile | 2 +- tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/scanf.sh | 4 - 7 files changed, 143 insertions(+), 150 deletions(-) --- base-commit: a64dcfb451e254085a7daee5fe51bf22959d52d3 change-id: 20250131-scanf-kunit-convert-f70dc33bb34c Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

4 months, 2 weeks

3
18
0 0

[PATCH][next] KVM: selftests: Fix spelling mistake "Unabled" -> "Unable"

by Colin Ian King

There is a spelling mistake in a TEST_FAIL message. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/kvm/lib/kvm_util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/lib/kvm_util.c b/tools/testing/selftests/kvm/lib/kvm_util.c index b1c3c7260902..279ad8946040 100644 --- a/tools/testing/selftests/kvm/lib/kvm_util.c +++ b/tools/testing/selftests/kvm/lib/kvm_util.c @@ -2283,7 +2283,7 @@ void kvm_get_stat(struct kvm_binary_stats *stats, const char *name, return; } - TEST_FAIL("Unabled to find stat '%s'", name); + TEST_FAIL("Unable to find stat '%s'", name); } __weak void kvm_arch_vm_post_create(struct kvm_vm *vm) -- 2.47.2

4 months, 2 weeks

2
1
0 0

[PATCH net-next v19 00/26] Introducing OpenVPN Data Channel Offload

by Antonio Quartulli

All minor and major reported problems have been finally addressed. Big thanks to Sabrina, who took the time to guide me through converting the peer socket to an RCU pointer. This patchset comes with an extra patch for .mailmap to remove my @openvpn.net address from the file, otherwise git won't allow me to send patches from this address. Notable changes since v18: * ovpnstruct.h renamed to ovpnpriv.h to reflect new struct name * removed peers release upon NETDEV_DOWN * moved netdev_put() to after call_rcu() in ovpn_peer_release() * removed DEBUG_NET_WARN_ON_ONCE in case of mismatching peer in peer_del_p2p() * turned peer->sock into RCU pointer to be able to guarantee its validity in every context (thanks Sabrina for this!) ** the point above forced various socket handling functions to change into using a properly dereferenced RCU pointer instead of accessing peer->sock directly * ensured peer->sock is NULLified upon release so that other contexts have a way to check if the member carries a valid pointer or not * fixed ovpn_opcode_from_skb()'s comment about accessing 4 bytes (not 1) * improved ovpn_udp_encap_recv()'s comment wrt various packet types * ensured that 'iv' in ovpn_aead_crypt/decrypt() is malloc'd and carried in the skb's cb for async crypto usage * added missing ovpn_crypto_key_slot_put() in ovpn_encrypt_one() error path * TCP TX work item moved from ovpn_peer to ovpn_socket to ensure it stays alive along with the socket (peer may disappear earlier during release) * pulled 4 bytes (instead of 1) before calling ovpn_opcode_from_skb() in ovpn_tcp_rcv() * added missing kfree_skb() in ovpn_tcp_socket_detach() * moved call to ovpn_mp_alloc() to ndo_init() to ensure it could always be rolled back in case of register_netdevice() failure * splitted by_vpn_addr hashtables into by_vpn_addr4 and by_vpn_addr6 so that peers assigned a v4 or a v6 can be hashed separately. This avoids hash_entry offset mix ups during entries iterations * changed ovpn_nl_attr_sockaddr_remote() into returning just bool * added a few more consistency checks in peer_new/peer_set * added completion member to peer to signal when socket detachment has finished and thus allow peer_del call to happily terminate (thanks Sabrina again!) * extended selftest script with "peer removal during traffic exchange" Please note that some patches were already reviewed/tested by a few people. These patches have retained the tags as they have hardly been touched. The latest code can also be found at: https://github.com/OpenVPN/linux-kernel-ovpn NOTE: TCP tests are still showing the following warning while running iperf. I have analysed the report several times, but it definitely looks like a false positive to me, so nothing to worry about. Basically the lockdep engine gets confused thinking that we are acquiring the lock twice on the same sock, but actually: 1) the kernel is first locking the 'iperf' (user) TCP socket; 2) ovpn is later locking the underlying TCP trasport socket. So there is NO risk of deadlock (and indeed nothing hangs), but I couldn't find a way to make the warning go away. Here it is: [ 1056.319348] ============================================ [ 1056.319740] WARNING: possible recursive locking detected [ 1056.319740] 6.14.0-rc1-00217-g30aa34e21028-dirty #111 Tainted: G O [ 1056.319740] -------------------------------------------- [ 1056.319740] iperf3/1438 is trying to acquire lock: [ 1056.319740] ffff88811ea10218 (slock-AF_INET){+.-.}-{3:3}, at: ovpn_tcp_send_skb+0xef/0x490 [ovpn] [ 1056.319740] but task is already holding lock: [ 1056.319740] ffff8881112b1c98 (slock-AF_INET){+.-.}-{3:3}, at: tcp_delack_timer+0xaa/0x2e0 [ 1056.319740] other info that might help us debug this: [ 1056.319740] Possible unsafe locking scenario: [ 1056.319740] CPU0 [ 1056.319740] ---- [ 1056.319740] lock(slock-AF_INET); [ 1056.319740] lock(slock-AF_INET); [ 1056.319740] *** DEADLOCK *** [ 1056.319740] May be due to missing lock nesting notation [ 1056.319740] 6 locks held by iperf3/1438: [ 1056.319740] #0: ffffc90000400c28 ((&icsk->icsk_delack_timer)){+.-.}-{0:0}, at: call_timer_fn+0x102/0x230 [ 1056.319740] #1: ffff8881112b1c98 (slock-AF_INET){+.-.}-{3:3}, at: tcp_delack_timer+0xaa/0x2e0 [ 1056.319740] #2: ffffffff85ef2b20 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x68/0x1190 [ 1056.319740] #3: ffffffff85ef2b20 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0x2d4/0x1bb0 [ 1056.319740] #4: ffffffff85ef2ac0 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x1fc/0xee0 [ 1056.319740] #5: ffffffff85ef2b20 (rcu_read_lock){....}-{1:3}, at: ovpn_encrypt_post+0x168/0x5d0 [ovpn] [ 1056.319740] stack backtrace: [ 1056.319740] CPU: 4 UID: 0 PID: 1438 Comm: iperf3 Tainted: G O 6.14.0-rc1-00217-g30aa34e21028-dirty #111 [ 1056.319740] Tainted: [O]=OOT_MODULE [ 1056.319740] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-20240910_120124-localhost 04/01/2014 [ 1056.319740] Call Trace: [ 1056.319740] <IRQ> [ 1056.319740] dump_stack_lvl+0x75/0xb0 [ 1056.319740] dump_stack+0x14/0x16 [ 1056.319740] print_deadlock_bug.cold+0xbd/0xc7 [ 1056.319740] validate_chain+0x6db/0xe00 [ 1056.319740] ? kfree_sensitive+0x63/0x70 [ 1056.319740] ? check_prev_add+0xa60/0xa60 [ 1056.319740] ? mark_lock+0x34/0x2d0 [ 1056.319740] ? check_wait_context.isra.0+0x245/0x6a0 [ 1056.319740] __lock_acquire+0x6ed/0x1000 [ 1056.319740] lock_acquire+0x182/0x3c0 [ 1056.319740] ? ovpn_tcp_send_skb+0xef/0x490 [ovpn] [ 1056.319740] ? __lock_acquire+0x1000/0x1000 [ 1056.319740] ? ovpn_encrypt_post+0x168/0x5d0 [ovpn] [ 1056.319740] ? __lock_acquire+0x1000/0x1000 [ 1056.319740] ? __kasan_slab_free+0x47/0x50 [ 1056.319740] _raw_spin_lock+0x36/0x50 [ 1056.319740] ? ovpn_tcp_send_skb+0xef/0x490 [ovpn] [ 1056.319740] ovpn_tcp_send_skb+0xef/0x490 [ovpn] [ 1056.319740] ovpn_encrypt_post+0x388/0x5d0 [ovpn] [ 1056.319740] ovpn_send+0x2a9/0x720 [ovpn] [ 1056.319740] ? ovpn_encrypt_post+0x5d0/0x5d0 [ovpn] [ 1056.319740] ovpn_net_xmit+0x5e1/0xa40 [ovpn] [ 1056.319740] ? ovpn_send+0x720/0x720 [ovpn] [ 1056.319740] dev_hard_start_xmit+0x1c4/0x350 [ 1056.319740] __dev_queue_xmit+0x477/0xee0 [ 1056.319740] ? netdev_core_pick_tx+0x2b0/0x2b0 [ 1056.319740] ? selinux_ip_postroute_compat+0x460/0x460 [ 1056.319740] neigh_direct_output+0x17/0x20 [ 1056.319740] ip_finish_output2+0x6fd/0x1bb0 [ 1056.319740] ? ip_fragment.constprop.0+0x220/0x220 [ 1056.319740] ? ip_frag_next+0xcf0/0xcf0 [ 1056.319740] __ip_finish_output+0x2f4/0x530 [ 1056.319740] ip_output+0x166/0x560 [ 1056.319740] ? __ip_local_out+0x44d/0x800 [ 1056.319740] ? ip_finish_output+0x20/0x20 [ 1056.319740] ? __ip_finish_output+0x530/0x530 [ 1056.319740] ? __kasan_check_write+0x18/0x20 [ 1056.319740] __ip_queue_xmit+0x6ec/0x1190 [ 1056.319740] ip_queue_xmit+0x4e/0x70 [ 1056.319740] __tcp_transmit_skb+0x17ce/0x3480 [ 1056.319740] ? __tcp_select_window+0x1700/0x1700 [ 1056.319740] ? __build_skb_around+0x23d/0x350 [ 1056.319740] __tcp_send_ack+0x393/0x700 [ 1056.319740] tcp_send_ack+0x43/0x50 [ 1056.319740] tcp_delack_timer_handler+0x2b2/0x440 [ 1056.319740] ? tcp_clamp_probe0_to_user_timeout+0x110/0x110 [ 1056.319740] tcp_delack_timer+0x1c9/0x2e0 [ 1056.319740] ? call_timer_fn+0x102/0x230 [ 1056.319740] ? tcp_delack_timer_handler+0x440/0x440 [ 1056.319740] call_timer_fn+0x151/0x230 [ 1056.319740] ? call_timer_fn+0x102/0x230 [ 1056.319740] ? trace_timer_expire_entry+0x1e0/0x1e0 [ 1056.319740] __run_timers+0x62f/0x950 [ 1056.319740] ? tcp_delack_timer_handler+0x440/0x440 [ 1056.319740] ? call_timer_fn+0x230/0x230 [ 1056.319740] ? __kasan_check_write+0x18/0x20 [ 1056.319740] ? trace_irq_disable+0x160/0x1e0 [ 1056.319740] run_timer_softirq+0x156/0x260 [ 1056.319740] ? __run_timers+0x950/0x950 [ 1056.319740] handle_softirqs+0x208/0x5d0 [ 1056.319740] ? trace_softirq_exit+0x1d0/0x1d0 [ 1056.319740] ? trace_preempt_on+0x21/0x30 [ 1056.319740] __irq_exit_rcu+0xc5/0x100 [ 1056.319740] irq_exit_rcu+0x12/0x20 [ 1056.319740] sysvec_apic_timer_interrupt+0x84/0xb0 [ 1056.319740] </IRQ> [ 1056.319740] <TASK> [ 1056.319740] asm_sysvec_apic_timer_interrupt+0x1f/0x30 [ 1056.319740] RIP: 0010:acpi_pm_read+0x14/0x20 [ 1056.319740] Code: dd 7a 04 31 f6 48 89 e5 ff d0 5d c3 c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 0f 1f 44 00 00 55 8b 15 10 cc 2c 03 48 89 e5 ed <25> ff ff ff 00 5d c3 0f 1f 44 00 00 f3 0f 1e fa 0f 1f 44 00 00 8b [ 1056.319740] RSP: 0018:ffffc90002277bf8 EFLAGS: 00000246 [ 1056.319740] RAX: 000000000097dc75 RBX: dffffc0000000000 RCX: ffffffff817c4b93 [ 1056.319740] RDX: 0000000000000608 RSI: 0000000000000000 RDI: ffffffff868a5960 [ 1056.319740] RBP: ffffc90002277bf8 R08: 0000000000000001 R09: 0000000000000000 [ 1056.319740] R10: 0000000000000001 R11: 0000000000000000 R12: fffff5200044ef8e [ 1056.319740] R13: ffffc90002277c70 R14: 0000000000034608 R15: ffffffff868a5960 [ 1056.319740] ? __x64_sys_gettimeofday+0xc3/0x1a0 [ 1056.319740] ktime_get_real_ts64+0xcd/0x2d0 [ 1056.319740] __x64_sys_gettimeofday+0xc3/0x1a0 [ 1056.319740] ? put_itimerspec64+0x190/0x190 [ 1056.319740] x64_sys_call+0x1741/0x17d0 [ 1056.319740] do_syscall_64+0xd9/0x1b0 [ 1056.319740] ? syscall_exit_to_user_mode+0xd4/0x1e0 [ 1056.319740] ? do_syscall_64+0xe6/0x1b0 [ 1056.319740] ? syscall_exit_to_user_mode+0xd4/0x1e0 [ 1056.319740] ? do_syscall_64+0xe6/0x1b0 [ 1056.319740] ? __might_fault+0xb9/0x120 [ 1056.319740] ? __might_fault+0xee/0x120 [ 1056.319740] ? syscall_exit_to_user_mode+0xd4/0x1e0 [ 1056.319740] ? do_syscall_64+0xe6/0x1b0 [ 1056.319740] ? syscall_exit_to_user_mode+0xd4/0x1e0 [ 1056.319740] ? do_syscall_64+0xe6/0x1b0 [ 1056.319740] ? do_syscall_64+0xe6/0x1b0 [ 1056.319740] ? do_syscall_64+0xe6/0x1b0 [ 1056.319740] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 1056.319740] RIP: 0033:0x7fa5fb82dabb [ 1056.319740] Code: e8 26 89 c0 48 89 47 08 48 85 f6 75 1e 31 c0 c3 81 3d 59 b5 ff ff ff ff ff 7f 74 76 f3 90 e9 3c ff ff ff b8 60 00 00 00 0f 05 <c3> 81 3d 3e b5 ff ff ff ff ff 7f 48 8d 15 33 b5 ff ff 48 8d 05 2c [ 1056.319740] RSP: 002b:00007ffd9d3763b8 EFLAGS: 00000297 ORIG_RAX: 0000000000000060 [ 1056.319740] RAX: ffffffffffffffda RBX: 000055a374dfb260 RCX: 00007fa5fb82dabb [ 1056.319740] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffd9d3763c0 [ 1056.319740] RBP: 00007ffd9d3763d0 R08: 0000000000000000 R09: 0000000000034608 [ 1056.319740] R10: 00007fa5fb829000 R11: 0000000000000297 R12: 00007ffd9d376450 [ 1056.319740] R13: 00007ffd9d3763c0 R14: 0000000000000001 R15: 0000000000000001 [ 1056.319740] </TASK> Thanks a lot! Best Regards, Antonio Quartulli OpenVPN Inc. --- Antonio Quartulli (26): net: introduce OpenVPN Data Channel Offload (ovpn) ovpn: add basic netlink support ovpn: add basic interface creation/destruction/management routines ovpn: keep carrier always on for MP interfaces ovpn: introduce the ovpn_peer object ovpn: introduce the ovpn_socket object ovpn: implement basic TX path (UDP) ovpn: implement basic RX path (UDP) ovpn: implement packet processing ovpn: store tunnel and transport statistics ipv6: export inet6_stream_ops via EXPORT_SYMBOL_GPL ovpn: implement TCP transport skb: implement skb_send_sock_locked_with_flags() ovpn: add support for MSG_NOSIGNAL in tcp_sendmsg ovpn: implement multi-peer support ovpn: implement peer lookup logic ovpn: implement keepalive mechanism ovpn: add support for updating local UDP endpoint ovpn: add support for peer floating ovpn: implement peer add/get/dump/delete via netlink ovpn: implement key add/get/del/swap via netlink ovpn: kill key and notify userspace in case of IV exhaustion ovpn: notify userspace when a peer is deleted ovpn: add basic ethtool support testing/selftests: add test tool and scripts for ovpn module mailmap: remove unwanted entry for Antonio Quartulli .mailmap | 1 - Documentation/netlink/specs/ovpn.yaml | 372 +++ Documentation/netlink/specs/rt_link.yaml | 16 + MAINTAINERS | 11 + drivers/net/Kconfig | 15 + drivers/net/Makefile | 1 + drivers/net/ovpn/Makefile | 22 + drivers/net/ovpn/bind.c | 55 + drivers/net/ovpn/bind.h | 101 + drivers/net/ovpn/crypto.c | 211 ++ drivers/net/ovpn/crypto.h | 145 ++ drivers/net/ovpn/crypto_aead.c | 408 ++++ drivers/net/ovpn/crypto_aead.h | 33 + drivers/net/ovpn/io.c | 462 ++++ drivers/net/ovpn/io.h | 34 + drivers/net/ovpn/main.c | 346 +++ drivers/net/ovpn/main.h | 14 + drivers/net/ovpn/netlink-gen.c | 213 ++ drivers/net/ovpn/netlink-gen.h | 41 + drivers/net/ovpn/netlink.c | 1248 ++++++++++ drivers/net/ovpn/netlink.h | 18 + drivers/net/ovpn/ovpnpriv.h | 57 + drivers/net/ovpn/peer.c | 1273 +++++++++++ drivers/net/ovpn/peer.h | 164 ++ drivers/net/ovpn/pktid.c | 129 ++ drivers/net/ovpn/pktid.h | 87 + drivers/net/ovpn/proto.h | 118 + drivers/net/ovpn/skb.h | 61 + drivers/net/ovpn/socket.c | 223 ++ drivers/net/ovpn/socket.h | 51 + drivers/net/ovpn/stats.c | 21 + drivers/net/ovpn/stats.h | 47 + drivers/net/ovpn/tcp.c | 557 +++++ drivers/net/ovpn/tcp.h | 34 + drivers/net/ovpn/udp.c | 421 ++++ drivers/net/ovpn/udp.h | 24 + include/linux/skbuff.h | 2 + include/uapi/linux/if_link.h | 15 + include/uapi/linux/ovpn.h | 111 + include/uapi/linux/udp.h | 1 + net/core/skbuff.c | 18 +- net/ipv6/af_inet6.c | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/net/ovpn/.gitignore | 2 + tools/testing/selftests/net/ovpn/Makefile | 17 + tools/testing/selftests/net/ovpn/config | 10 + tools/testing/selftests/net/ovpn/data64.key | 5 + tools/testing/selftests/net/ovpn/ovpn-cli.c | 2377 ++++++++++++++++++++ tools/testing/selftests/net/ovpn/tcp_peers.txt | 5 + .../testing/selftests/net/ovpn/test-chachapoly.sh | 9 + tools/testing/selftests/net/ovpn/test-float.sh | 9 + tools/testing/selftests/net/ovpn/test-tcp.sh | 9 + tools/testing/selftests/net/ovpn/test.sh | 192 ++ tools/testing/selftests/net/ovpn/udp_peers.txt | 5 + 54 files changed, 9817 insertions(+), 6 deletions(-) --- base-commit: 39f54262ba499d862420a97719d2f0eea0cbd394 change-id: 20241002-b4-ovpn-eeee35c694a2 Best regards, -- Antonio Quartulli <antonio(a)openvpn.net>

4 months, 2 weeks

4
36
0 0

[PATCH v2 00/15] riscv: add SBI FWFT misaligned exception delegation support

by Clément Léger

The SBI Firmware Feature extension allows the S-mode to request some specific features (either hardware or software) to be enabled. This series uses this extension to request misaligned access exception delegation to S-mode in order to let the kernel handle it. It also adds support for the KVM FWFT SBI extension based on the misaligned access handling infrastructure. FWFT SBI extension is part of the SBI V3.0 specifications [1]. It can be tested using the qemu provided at [2] which contains the series from [3]. kvm-unit-tests [4] can be used inside kvm to tests the correct delegation of misaligned exceptions. Upstream OpenSBI can be used. The tests can be run using the included kselftest: $ qemu-system-riscv64 \ -cpu rv64,trap-misaligned-access=true,v=true \ -M virt \ -m 1024M \ -bios fw_dynamic.bin \ -kernel Image ... # ./misaligned TAP version 13 1..23 # Starting 23 tests from 1 test cases. # RUN global.gp_load_lh ... # OK global.gp_load_lh ok 1 global.gp_load_lh # RUN global.gp_load_lhu ... # OK global.gp_load_lhu ok 2 global.gp_load_lhu # RUN global.gp_load_lw ... # OK global.gp_load_lw ok 3 global.gp_load_lw # RUN global.gp_load_lwu ... # OK global.gp_load_lwu ok 4 global.gp_load_lwu # RUN global.gp_load_ld ... # OK global.gp_load_ld ok 5 global.gp_load_ld # RUN global.gp_load_c_lw ... # OK global.gp_load_c_lw ok 6 global.gp_load_c_lw # RUN global.gp_load_c_ld ... # OK global.gp_load_c_ld ok 7 global.gp_load_c_ld # RUN global.gp_load_c_ldsp ... # OK global.gp_load_c_ldsp ok 8 global.gp_load_c_ldsp # RUN global.gp_load_sh ... # OK global.gp_load_sh ok 9 global.gp_load_sh # RUN global.gp_load_sw ... # OK global.gp_load_sw ok 10 global.gp_load_sw # RUN global.gp_load_sd ... # OK global.gp_load_sd ok 11 global.gp_load_sd # RUN global.gp_load_c_sw ... # OK global.gp_load_c_sw ok 12 global.gp_load_c_sw # RUN global.gp_load_c_sd ... # OK global.gp_load_c_sd ok 13 global.gp_load_c_sd # RUN global.gp_load_c_sdsp ... # OK global.gp_load_c_sdsp ok 14 global.gp_load_c_sdsp # RUN global.fpu_load_flw ... # OK global.fpu_load_flw ok 15 global.fpu_load_flw # RUN global.fpu_load_fld ... # OK global.fpu_load_fld ok 16 global.fpu_load_fld # RUN global.fpu_load_c_fld ... # OK global.fpu_load_c_fld ok 17 global.fpu_load_c_fld # RUN global.fpu_load_c_fldsp ... # OK global.fpu_load_c_fldsp ok 18 global.fpu_load_c_fldsp # RUN global.fpu_store_fsw ... # OK global.fpu_store_fsw ok 19 global.fpu_store_fsw # RUN global.fpu_store_fsd ... # OK global.fpu_store_fsd ok 20 global.fpu_store_fsd # RUN global.fpu_store_c_fsd ... # OK global.fpu_store_c_fsd ok 21 global.fpu_store_c_fsd # RUN global.fpu_store_c_fsdsp ... # OK global.fpu_store_c_fsdsp ok 22 global.fpu_store_c_fsdsp # RUN global.gen_sigbus ... [12797.988647] misaligned[618]: unhandled signal 7 code 0x1 at 0x0000000000014dc0 in misaligned[4dc0,10000+76000] [12797.988990] CPU: 0 UID: 0 PID: 618 Comm: misaligned Not tainted 6.13.0-rc6-00008-g4ec4468967c9-dirty #51 [12797.989169] Hardware name: riscv-virtio,qemu (DT) [12797.989264] epc : 0000000000014dc0 ra : 0000000000014d00 sp : 00007fffe165d100 [12797.989407] gp : 000000000008f6e8 tp : 0000000000095760 t0 : 0000000000000008 [12797.989544] t1 : 00000000000965d8 t2 : 000000000008e830 s0 : 00007fffe165d160 [12797.989692] s1 : 000000000000001a a0 : 0000000000000000 a1 : 0000000000000002 [12797.989831] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffffdeadbeef [12797.989964] a5 : 000000000008ef61 a6 : 626769735f6e0000 a7 : fffffffffffff000 [12797.990094] s2 : 0000000000000001 s3 : 00007fffe165d838 s4 : 00007fffe165d848 [12797.990238] s5 : 000000000000001a s6 : 0000000000010442 s7 : 0000000000010200 [12797.990391] s8 : 000000000000003a s9 : 0000000000094508 s10: 0000000000000000 [12797.990526] s11: 0000555567460668 t3 : 00007fffe165d070 t4 : 00000000000965d0 [12797.990656] t5 : fefefefefefefeff t6 : 0000000000000073 [12797.990756] status: 0000000200004020 badaddr: 000000000008ef61 cause: 0000000000000006 [12797.990911] Code: 8793 8791 3423 fcf4 3783 fc84 c737 dead 0713 eef7 (c398) 0001 # OK global.gen_sigbus ok 23 global.gen_sigbus # PASSED: 23 / 23 tests passed. # Totals: pass:23 fail:0 xfail:0 xpass:0 skip:0 error:0 With kvm-tools: # lkvm run -k sbi.flat -m 128 Info: # lkvm run -k sbi.flat -m 128 -c 1 --name guest-97 Info: Removed ghost socket file "/root/.lkvm//guest-97.sock". ########################################################################## # kvm-unit-tests ########################################################################## ... [test messages elided] PASS: sbi: fwft: FWFT extension probing no error PASS: sbi: fwft: get/set reserved feature 0x6 error == SBI_ERR_DENIED PASS: sbi: fwft: get/set reserved feature 0x3fffffff error == SBI_ERR_DENIED PASS: sbi: fwft: get/set reserved feature 0x80000000 error == SBI_ERR_DENIED PASS: sbi: fwft: get/set reserved feature 0xbfffffff error == SBI_ERR_DENIED PASS: sbi: fwft: misaligned_deleg: Get misaligned deleg feature no error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature invalid value error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature invalid value error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value no error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value 0 PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value no error PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value 1 PASS: sbi: fwft: misaligned_deleg: Verify misaligned load exception trap in supervisor SUMMARY: 50 tests, 2 unexpected failures, 12 skipped This series is available at [6]. Link: https://github.com/riscv-non-isa/riscv-sbi-doc/releases/download/vv3.0-rc2/… [1] Link: https://github.com/rivosinc/qemu/tree/dev/cleger/misaligned [2] Link: https://lore.kernel.org/all/20241211211933.198792-3-fkonrad@amd.com/T/ [3] Link: https://github.com/clementleger/kvm-unit-tests/tree/dev/cleger/fwft_v1 [4] Link: https://github.com/clementleger/unaligned_test [5] Link: https://github.com/rivosinc/linux/tree/dev/cleger/fwft_v1 [6] --- V2: - Added Kselftest for misaligned testing - Added get_user() usage instead of __get_user() - Reenable interrupt when possible in misaligned access handling - Document that riscv supports unaligned-traps - Fix KVM extension state when an init function is present - Rework SBI misaligned accesses trap delegation code - Added support for CPU hotplugging - Added KVM SBI reset callback - Added reset for KVM SBI FWFT lock - Return SBI_ERR_DENIED_LOCKED when LOCK flag is set Clément Léger (15): riscv: add Firmware Feature (FWFT) SBI extensions definitions riscv: misaligned: request misaligned exception from SBI riscv: misaligned: use on_each_cpu() for scalar misaligned access probing riscv: misaligned: use correct CONFIG_ ifdef for misaligned_access_speed riscv: misaligned: move emulated access uniformity check in a function riscv: misaligned: add a function to check misalign trap delegability riscv: misaligned: factorize trap handling riscv: misaligned: enable IRQs while handling misaligned accesses riscv: misaligned: use get_user() instead of __get_user() Documentation/sysctl: add riscv to unaligned-trap supported archs selftests: riscv: add misaligned access testing RISC-V: KVM: add SBI extension init()/deinit() functions RISC-V: KVM: add SBI extension reset callback RISC-V: KVM: add support for FWFT SBI extension RISC-V: KVM: add support for SBI_FWFT_MISALIGNED_DELEG Documentation/admin-guide/sysctl/kernel.rst | 4 +- arch/riscv/include/asm/cpufeature.h | 8 +- arch/riscv/include/asm/kvm_host.h | 5 +- arch/riscv/include/asm/kvm_vcpu_sbi.h | 12 + arch/riscv/include/asm/kvm_vcpu_sbi_fwft.h | 37 +++ arch/riscv/include/asm/sbi.h | 33 +++ arch/riscv/include/uapi/asm/kvm.h | 1 + arch/riscv/kernel/traps.c | 57 ++-- arch/riscv/kernel/traps_misaligned.c | 138 +++++++++- arch/riscv/kernel/unaligned_access_speed.c | 11 +- arch/riscv/kvm/Makefile | 1 + arch/riscv/kvm/vcpu.c | 7 +- arch/riscv/kvm/vcpu_sbi.c | 58 ++++ arch/riscv/kvm/vcpu_sbi_fwft.c | 226 ++++++++++++++++ arch/riscv/kvm/vcpu_sbi_sta.c | 3 +- .../selftests/riscv/misaligned/.gitignore | 1 + .../selftests/riscv/misaligned/Makefile | 12 + .../selftests/riscv/misaligned/common.S | 33 +++ .../testing/selftests/riscv/misaligned/fpu.S | 180 +++++++++++++ tools/testing/selftests/riscv/misaligned/gp.S | 103 +++++++ .../selftests/riscv/misaligned/misaligned.c | 254 ++++++++++++++++++ 21 files changed, 1137 insertions(+), 47 deletions(-) create mode 100644 arch/riscv/include/asm/kvm_vcpu_sbi_fwft.h create mode 100644 arch/riscv/kvm/vcpu_sbi_fwft.c create mode 100644 tools/testing/selftests/riscv/misaligned/.gitignore create mode 100644 tools/testing/selftests/riscv/misaligned/Makefile create mode 100644 tools/testing/selftests/riscv/misaligned/common.S create mode 100644 tools/testing/selftests/riscv/misaligned/fpu.S create mode 100644 tools/testing/selftests/riscv/misaligned/gp.S create mode 100644 tools/testing/selftests/riscv/misaligned/misaligned.c -- 2.47.2

4 months, 2 weeks

3
23
0 0

[PATCH net-next v9 00/11] net: Improve netns handling in rtnetlink

by Xiao Liang

This patch series includes some netns-related improvements and fixes for rtnetlink, to make link creation more intuitive: 1) Creating link in another net namespace doesn't conflict with link names in current one. 2) Refector rtnetlink link creation. Create link in target namespace directly. So that # ip link add netns ns1 link-netns ns2 tun0 type gre ... will create tun0 in ns1, rather than create it in ns2 and move to ns1. And don't conflict with another interface named "tun0" in current netns. Patch 01 avoids link name conflict in different netns. To achieve 2), there're mainly 3 steps: - Patch 02 packs newlink() parameters into a struct, including the original "src_net" along with more netns context. No semantic changes are introduced. - Patch 03 ~ 07 converts device drivers to use the explicit netns extracted from params. - Patch 08 ~ 09 removes the old netns parameter, and converts rtnetlink to create device in target netns directly. Patch 10 ~ 11 adds some tests for link name and link netns. BTW please note there're some issues found in current code: - In amt_newlink() drivers/net/amt.c: amt->net = net; ... amt->stream_dev = dev_get_by_index(net, ... Uses net, but amt_lookup_upper_dev() only searches in dev_net. So the AMT device may not be properly deleted if it's in a different netns from lower dev. - In lowpan_newlink() in net/ieee802154/6lowpan/core.c: wdev = dev_get_by_index(dev_net(ldev), nla_get_u32(tb[IFLA_LINK])); Looks for IFLA_LINK in dev_net, but in theory the ifindex is defined in link netns. And thanks to Kuniyuki for fixing related issues in gtp and pfcp: https://lore.kernel.org/netdev/20250110014754.33847-1-kuniyu@amazon.com/ --- v9: - Change the prototype of macvlan_common_newlink(). - Minor fixes of coding style and local variables. v8: link: https://lore.kernel.org/all/20250113143719.7948-1-shaw.leon@gmail.com/ - Move dev and ext_ack out from param struct. - Validate link_net and dev_net are identical for 6lowpan. v7: link: https://lore.kernel.org/all/20250104125732.17335-1-shaw.leon@gmail.com/ - Add selftest kconfig. - Remove a duplicated test of ip6gre. v6: link: https://lore.kernel.org/all/20241218130909.2173-1-shaw.leon@gmail.com/ - Split prototype, driver and rtnetlink changes. - Add more tests for link netns. - Fix IPv6 tunnel net overwriten in ndo_init(). - Reorder variable declarations. - Exclude a ip_tunnel-specific patch. v5: link: https://lore.kernel.org/all/20241209140151.231257-1-shaw.leon@gmail.com/ - Fix function doc in batman-adv. - Include peer_net in rtnl newlink parameters. v4: link: https://lore.kernel.org/all/20241118143244.1773-1-shaw.leon@gmail.com/ - Pack newlink() parameters to a single struct. - Use ynl async_msg_queue.empty() in selftest. v3: link: https://lore.kernel.org/all/20241113125715.150201-1-shaw.leon@gmail.com/ - Drop "netns_atomic" flag and module parameter. Add netns parameter to newlink() instead, and convert drivers accordingly. - Move python NetNSEnter helper to net selftest lib. v2: link: https://lore.kernel.org/all/20241107133004.7469-1-shaw.leon@gmail.com/ - Check NLM_F_EXCL to ensure only link creation is affected. - Add self tests for link name/ifindex conflict and notifications in different netns. - Changes in dummy driver and ynl in order to add the test case. v1: link: https://lore.kernel.org/all/20241023023146.372653-1-shaw.leon@gmail.com/ Xiao Liang (11): rtnetlink: Lookup device in target netns when creating link rtnetlink: Pack newlink() params into struct net: Use link netns in newlink() of rtnl_link_ops ieee802154: 6lowpan: Validate link netns in newlink() of rtnl_link_ops net: ip_tunnel: Use link netns in newlink() of rtnl_link_ops net: ipv6: Use link netns in newlink() of rtnl_link_ops net: xfrm: Use link netns in newlink() of rtnl_link_ops rtnetlink: Remove "net" from newlink params rtnetlink: Create link directly in target net namespace selftests: net: Add python context manager for netns entering selftests: net: Add test cases for link and peer netns drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 9 +- drivers/net/amt.c | 11 +- drivers/net/bareudp.c | 9 +- drivers/net/bonding/bond_netlink.c | 6 +- drivers/net/can/dev/netlink.c | 4 +- drivers/net/can/vxcan.c | 7 +- .../ethernet/qualcomm/rmnet/rmnet_config.c | 9 +- drivers/net/geneve.c | 9 +- drivers/net/gtp.c | 10 +- drivers/net/ipvlan/ipvlan.h | 3 +- drivers/net/ipvlan/ipvlan_main.c | 8 +- drivers/net/ipvlan/ipvtap.c | 6 +- drivers/net/macsec.c | 9 +- drivers/net/macvlan.c | 21 +-- drivers/net/macvtap.c | 6 +- drivers/net/netkit.c | 14 +- drivers/net/pfcp.c | 9 +- drivers/net/ppp/ppp_generic.c | 9 +- drivers/net/team/team_core.c | 6 +- drivers/net/veth.c | 7 +- drivers/net/vrf.c | 5 +- drivers/net/vxlan/vxlan_core.c | 9 +- drivers/net/wireguard/device.c | 7 +- drivers/net/wireless/virtual/virt_wifi.c | 8 +- drivers/net/wwan/wwan_core.c | 16 +- include/linux/if_macvlan.h | 6 +- include/net/ip_tunnels.h | 5 +- include/net/rtnetlink.h | 40 ++++- net/8021q/vlan_netlink.c | 9 +- net/batman-adv/soft-interface.c | 9 +- net/bridge/br_netlink.c | 6 +- net/caif/chnl_net.c | 5 +- net/core/rtnetlink.c | 34 +++-- net/hsr/hsr_netlink.c | 12 +- net/ieee802154/6lowpan/core.c | 7 +- net/ipv4/ip_gre.c | 22 ++- net/ipv4/ip_tunnel.c | 10 +- net/ipv4/ip_vti.c | 9 +- net/ipv4/ipip.c | 9 +- net/ipv6/ip6_gre.c | 30 ++-- net/ipv6/ip6_tunnel.c | 19 ++- net/ipv6/ip6_vti.c | 15 +- net/ipv6/sit.c | 17 ++- net/xfrm/xfrm_interface_core.c | 15 +- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 5 + .../testing/selftests/net/lib/py/__init__.py | 2 +- tools/testing/selftests/net/lib/py/netns.py | 18 +++ tools/testing/selftests/net/link_netns.py | 141 ++++++++++++++++++ tools/testing/selftests/net/netns-name.sh | 10 ++ 50 files changed, 494 insertions(+), 179 deletions(-) create mode 100755 tools/testing/selftests/net/link_netns.py -- 2.48.1

4 months, 2 weeks

3
25
0 0

[PATCH net-next RESEND v7 0/3] netdev-genl: Add an xsk attribute to queues

by Joe Damato

Greetings: [Note: RESEND because apparently my gmail oauth2 client is breaking patches I send] Welcome to v7. Added CONFIG_XDP_SOCKETS to the selftests/driver/net kernel config in patch 3. Updated the xdp_helper.c to return -1 on AF_XDP non-existence, and updated queues.py to skip the test if AF_XDP does not exist (but fail in other failure cases). Tested on kernels with and without CONFIG_XDP_SOCKETS enabled. This is an attempt to followup on something Jakub asked me about [1], adding an xsk attribute to queues and more clearly documenting which queues are linked to NAPIs... After the RFC [2], Jakub suggested creating an empty nest for queues which have a pool, so I've adjusted this version to work that way. The nest can be extended in the future to express attributes about XSK as needed. Queues which are not used for AF_XDP do not have the xsk attribute present. I've run the included test on: - my mlx5 machine (via NETIF=) - without setting NETIF And the test seems to pass in both cases. Thanks, Joe [1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/ [2]: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ v7: - Added CONFIG_XDP_SOCKETS to selftests/driver/net/config as suggested by Stanislav. - Updated xdp_helper.c to return -1 for AF_XDP non-existence, but 1 for other failures. - Updated queues.py to mark test as skipped if AF_XDP does not exist. v6: https://lore.kernel.org/bpf/20250210193903.16235-1-jdamato@fastly.com/ - Added ifdefs for CONFIG_XDP_SOCKETS in patch 2 as Stanislav suggested. v5: https://lore.kernel.org/bpf/20250208041248.111118-1-jdamato@fastly.com/ - Removed unused ret variable from patch 2 as Simon suggested. v4: https://lore.kernel.org/lkml/20250207030916.32751-1-jdamato@fastly.com/ - Add patch 1, as suggested by Jakub, which adds an empty nest helper. - Use the helper in patch 2, which makes the code cleaner and prevents a possible bug. v3: https://lore.kernel.org/netdev/20250204191108.161046-1-jdamato@fastly.com/ - Change comment format in patch 2 to avoid kdoc warnings. No other changes. v2: https://lore.kernel.org/all/20250203185828.19334-1-jdamato@fastly.com/ - Switched from RFC to actual submission now that net-next is open - Adjusted patch 1 to include an empty nest as suggested by Jakub - Adjusted patch 2 to update the test based on changes to patch 1, and to incorporate some Python feedback from Jakub :) rfc: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ Joe Damato (3): netlink: Add nla_put_empty_nest helper netdev-genl: Add an XSK attribute to queues selftests: drv-net: Test queue xsk attribute Documentation/netlink/specs/netdev.yaml | 13 ++- include/net/netlink.h | 15 +++ include/uapi/linux/netdev.h | 6 ++ net/core/netdev-genl.c | 12 +++ tools/include/uapi/linux/netdev.h | 6 ++ .../testing/selftests/drivers/net/.gitignore | 2 + tools/testing/selftests/drivers/net/Makefile | 3 + tools/testing/selftests/drivers/net/config | 1 + tools/testing/selftests/drivers/net/queues.py | 42 +++++++- .../selftests/drivers/net/xdp_helper.c | 98 +++++++++++++++++++ 10 files changed, 194 insertions(+), 4 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/.gitignore create mode 100644 tools/testing/selftests/drivers/net/xdp_helper.c base-commit: 4079918ae720e842ed7dff65fedeb9980b374995 -- 2.43.0

4 months, 2 weeks

2
2
0 0

[PATCH bpf-next v2 0/3] bpf: Fix array bounds error with may_goto and add selftest

by Jiayuan Chen

Syzbot caught an array out-of-bounds bug [1]. It turns out that when the BPF program runs through do_misc_fixups(), it allocates an extra 8 bytes on the call stack, which eventually causes stack_depth to exceed 512. I was able to reproduce this issue probabilistically by enabling CONFIG_UBSAN=y and disabling CONFIG_BPF_JIT_ALWAYS_ON with the selfttest I provide in second patch(although it doesn't happen every time - I didn't dig deeper into why UBSAN behaves this way). Furthermore, if I set /proc/sys/net/core/bpf_jit_enable to 0 to disable the jit, a panic occurs, and the reason is the same, that bpf_func is assigned an incorrect address. [---[ end trace ]--- [Oops: general protection fault, probably for non-canonical address 0x100f0e0e0d090808: 0000 [#1] PREEMPT SMP NOPTI [Tainted: [W]=WARN, [O]=OOT_MODULE [RIP: 0010:bpf_test_run+0x1d2/0x360 [RSP: 0018:ffffafc7955178a0 EFLAGS: 00010246 [RAX: 100f0e0e0d090808 RBX: ffff8e9fdb2c4100 RCX: 0000000000000018 [RDX: 00000000002b5b18 RSI: ffffafc780497048 RDI: ffff8ea04d601700 [RBP: ffffafc780497000 R08: ffffafc795517a0c R09: 0000000000000000 [R10: 0000000000000000 R11: fefefefefefefeff R12: ffff8ea04d601700 [R13: ffffafc795517928 R14: ffffafc795517928 R15: 0000000000000000 [CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [CR2: 00007f181c064648 CR3: 00000001aa2be003 CR4: 0000000000770ef0 [DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [PKRU: 55555554 [Call Trace: [ <TASK> [ ? die_addr+0x36/0x90 [ ? exc_general_protection+0x237/0x430 [ ? asm_exc_general_protection+0x26/0x30 [ ? bpf_test_run+0x1d2/0x360 [ ? bpf_test_run+0x10d/0x360 [ ? __link_object+0x12a/0x1e0 [ ? slab_build_skb+0x23/0x130 [ ? kmem_cache_alloc_noprof+0x2ea/0x3f0 [ ? sk_prot_alloc+0xc2/0x120 [ bpf_prog_test_run_skb+0x21b/0x590 [ __sys_bpf+0x340/0xa80 [ __x64_sys_bpf+0x1e/0x30 --- v1 -> v2: Directly reject loading programs with a stack size greater than 512 when jit disabled.(Suggested by Alexei Starovoitov) https://lore.kernel.org/bpf/20250212135251.85487-1-mrpre@163.com/T/#u --- Jiayuan Chen (3): bpf: Fix array bounds error with may_goto selftests/bpf: Allow the program to select specific modes for testing selftests/bpf: Add selftest for may_goto kernel/bpf/core.c | 18 +++++-- kernel/bpf/verifier.c | 7 +++ tools/testing/selftests/bpf/progs/bpf_misc.h | 2 + .../selftests/bpf/progs/verifier_stack_ptr.c | 50 +++++++++++++++++++ tools/testing/selftests/bpf/test_loader.c | 27 ++++++++++ 5 files changed, 100 insertions(+), 4 deletions(-) -- 2.47.1

4 months, 3 weeks

2
9
0 0

[PATCH v1] selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB

by Mickaël Salaün

Since commit 5155cbcdbf03 ("af_unix: Add a prompt to CONFIG_AF_UNIX_OOB"), the Landlock selftests's configuration is not enough to build a minimal kernel. Because scoped_signal_test checks with the MSG_OOB flag, we need to enable CONFIG_AF_UNIX_OOB for tests: # RUN fown.no_sandbox.sigurg_socket ... # scoped_signal_test.c:420:sigurg_socket:Expected 1 (1) == send(client_socket, ".", 1, MSG_OOB) (-1) # sigurg_socket: Test terminated by assertion # FAIL fown.no_sandbox.sigurg_socket ... Cc: Florent Revest <revest(a)chromium.org> Cc: Günther Noack <gnoack(a)google.com> Signed-off-by: Mickaël Salaün <mic(a)digikod.net> --- tools/testing/selftests/landlock/config | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/landlock/config b/tools/testing/selftests/landlock/config index 29af19c4e9f9..361f94f8cb0d 100644 --- a/tools/testing/selftests/landlock/config +++ b/tools/testing/selftests/landlock/config @@ -1,3 +1,4 @@ +CONFIG_AF_UNIX_OOB=y CONFIG_CGROUPS=y CONFIG_CGROUP_SCHED=y CONFIG_INET=y -- 2.48.1

4 months, 3 weeks

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror