Hi Linus,
Please pull this second Kselftest fixes update for Linux 5.5-rc1.
This second Kselftest fixes update for Linux 5.5-rc1 consists of
an urgent revert to fix regression in CI coverage.
diff is attached.
thanks,
-- Shuah
----------------------------------------------------------------
The following changes since commit ed2d8fa734e7759ac3788a19f308d3243d0eb164:
selftests: sync: Fix cast warnings on arm (2019-11-07 14:54:37 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
tags/linux-kselftest-5.5-rc1-fixes2
for you to fetch changes up to f60b85e83659b5fbd3eb2c8f68d33ef4e35ebb2c:
Revert "selftests: Fix O= and KBUILD_OUTPUT handling for relative
paths" (2019-11-28 16:27:44 -0700)
----------------------------------------------------------------
linux-kselftest-5.5-rc1-fixes2
This second Kselftest fixes update for Linux 5.5-rc1 consists of
an urgent revert to fix regression in CI coverage.
----------------------------------------------------------------
Shuah Khan (1):
Revert "selftests: Fix O= and KBUILD_OUTPUT handling for relative
paths"
tools/testing/selftests/Makefile | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
----------------------------------------------------------------
Support for frequency limits in dev_pm_qos was removed when cpufreq was
switched to freq_qos, this series attempts to restore it by
reimplementing on top of freq_qos.
Discussion about removal is here:
https://lore.kernel.org/linux-pm/VI1PR04MB7023DF47D046AEADB4E051EBEE680@VI1…
The cpufreq core switched away because it needs contraints at the level
of a "cpufreq_policy" which cover multiple cpus so dev_pm_qos coupling
to struct device was not useful. Cpufreq could only use dev_pm_qos by
implementing an additional layer of aggregation anyway.
However in the devfreq subsystem scaling is always performed on a per-device
basis so dev_pm_qos is a very good match. Support for dev_pm_qos in devfreq
core is here (latest version, no dependencies outside this series):
https://patchwork.kernel.org/cover/11252409/
That series is RFC mostly because it needs these PM core patches.
Earlier versions got entangled in some locking cleanups but those are
not strictly necessary to get dev_pm_qos functionality.
In theory if freq_qos is extended to handle conflicting min/max values then
this sharing would be valuable. Right now freq_qos just ties two unrelated
pm_qos aggregations for min and max freq.
---
This is implemented by embeding a freq_qos_request inside dev_pm_qos_request:
the data field was already an union in order to deal with flag requests.
The internal freq_qos_apply is exported so that it can be called from
dev_pm_qos apply_constraints.
The dev_pm_qos_constraints_destroy function has no obvious equivalent in
freq_qos and the whole approach of "removing requests" is somewhat dubios:
request objects should be owned by consumers and the list of qos requests
will most likely be empty when the target device is deleted. Series follows
current pattern for dev_pm_qos.
First two patches can be applied separately.
Changes since v3:
* Fix s/QOS/QoS in patch 2 title
* Improves comments in kunit test
* Fix assertions after freq_qos_remove_request
* Remove (c) from NXP copyright header
* Wrap long lines in qos.c to be under 80 chars. This fixes checkpatch but the
rule is already broken by code in the files.
* Collect reviews
Link to v3: https://patchwork.kernel.org/cover/11260627/
Changes since v2:
* #define PM_QOS_MAX_FREQUENCY_DEFAULT_VALUE FREQ_QOS_MAX_DEFAULT_VALUE
* #define FREQ_QOS_MAX_DEFAULT_VALUE S32_MAX (in new patch)
* Add initial kunit test for freq_qos, validating the MAX_DEFAULT_VALUE found
by Matthias and another recent fix. Testing this should be easier!
Link to v2: https://patchwork.kernel.org/cover/11250413/
Changes since v1:
* Don't rename or EXPORT_SYMBOL_GPL the freq_qos_apply function; just
drop the static marker.
Link to v1: https://patchwork.kernel.org/cover/11212887/
Leonard Crestez (4):
PM / QoS: Initial kunit test
PM / QoS: Redefine FREQ_QOS_MAX_DEFAULT_VALUE to S32_MAX
PM / QoS: Reorder pm_qos/freq_qos/dev_pm_qos structs
PM / QoS: Restore DEV_PM_QOS_MIN/MAX_FREQUENCY
drivers/base/Kconfig | 4 ++
drivers/base/power/Makefile | 1 +
drivers/base/power/qos-test.c | 117 ++++++++++++++++++++++++++++++++++
drivers/base/power/qos.c | 73 +++++++++++++++++++--
include/linux/pm_qos.h | 86 ++++++++++++++-----------
kernel/power/qos.c | 4 +-
6 files changed, 242 insertions(+), 43 deletions(-)
create mode 100644 drivers/base/power/qos-test.c
--
2.17.1
Fixes the issue caused by the fact that in C in the expression
of the form -1234L only 1234L is the actual literal, the unary
minus is an operation applied to the literal. Which means that
to express the lower bound for the type one has to negate the
upper bound and subtract 1.
Original error:
Expected test_data[i].expected.tv_sec == timestamp.tv_sec, but
test_data[i].expected.tv_sec == -2147483648
timestamp.tv_sec == 2147483648
1901-12-13 Lower bound of 32bit < 0 timestamp, no extra bits: msb:1
lower_bound:1 extra_bits: 0
Expected test_data[i].expected.tv_sec == timestamp.tv_sec, but
test_data[i].expected.tv_sec == 2147483648
timestamp.tv_sec == 6442450944
2038-01-19 Lower bound of 32bit <0 timestamp, lo extra sec bit on:
msb:1 lower_bound:1 extra_bits: 1
Expected test_data[i].expected.tv_sec == timestamp.tv_sec, but
test_data[i].expected.tv_sec == 6442450944
timestamp.tv_sec == 10737418240
2174-02-25 Lower bound of 32bit <0 timestamp, hi extra sec bit on:
msb:1 lower_bound:1 extra_bits: 2
not ok 1 - inode_test_xtimestamp_decoding
not ok 1 - ext4_inode_test
Reported-by: Geert Uytterhoeven <geert(a)linux-m68k.org>
Signed-off-by: Iurii Zaikin <yzaikin(a)google.com>
Tested-by: Geert Uytterhoeven <geert(a)linux-m68k.org>
---
fs/ext4/inode-test.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ext4/inode-test.c b/fs/ext4/inode-test.c
index 92a9da1774aa..bbce1c328d85 100644
--- a/fs/ext4/inode-test.c
+++ b/fs/ext4/inode-test.c
@@ -25,7 +25,7 @@
* For constructing the negative timestamp lower bound value.
* binary: 10000000 00000000 00000000 00000000
*/
-#define LOWER_MSB_1 (-0x80000000L)
+#define LOWER_MSB_1 (-(UPPER_MSB_0) - 1L) /* avoid overflow */
/*
* For constructing the negative timestamp upper bound value.
* binary: 11111111 11111111 11111111 11111111
--
2.24.0.432.g9d3f5f5b63-goog
Hi Linus,
Please pull these seccomp updates for v5.5-rc1. Mostly this is
implementing the new flag SECCOMP_USER_NOTIF_FLAG_CONTINUE, but there
are cleanups as well. Most notably, the secure_computing() prototype
has changed (to remove an unused argument), but this has happened at the
same time as riscv adding seccomp support, so the cleanest merge order
would be to merge riscv first, then seccomp with the following patch for
riscv to handle the change from "seccomp: simplify secure_computing()":
diff --git a/arch/riscv/kernel/ptrace.c b/arch/riscv/kernel/ptrace.c
index 0f84628b9385..407464201b91 100644
--- a/arch/riscv/kernel/ptrace.c
+++ b/arch/riscv/kernel/ptrace.c
@@ -159,7 +159,7 @@ __visible void do_syscall_trace_enter(struct pt_regs *regs)
* If this fails we might have return value in a0 from seccomp
* (via SECCOMP_RET_ERRNO/TRACE).
*/
- if (secure_computing(NULL) == -1) {
+ if (secure_computing() == -1) {
syscall_set_nr(current, regs, -1);
return;
}
Thanks!
-Kees
The following changes since commit da0c9ea146cbe92b832f1b0f694840ea8eb33cce:
Linux 5.4-rc2 (2019-10-06 14:27:30 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git tags/seccomp-v5.5-rc1
for you to fetch changes up to 23b2c96fad21886c53f5e1a4ffedd45ddd2e85ba:
seccomp: rework define for SECCOMP_USER_NOTIF_FLAG_CONTINUE (2019-10-28 12:29:46 -0700)
----------------------------------------------------------------
seccomp updates for v5.5
- implement SECCOMP_USER_NOTIF_FLAG_CONTINUE (Christian Brauner)
- fixes to selftests (Christian Brauner)
- remove secure_computing() argument (Christian Brauner)
----------------------------------------------------------------
Christian Brauner (6):
seccomp: avoid overflow in implicit constant conversion
seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE
seccomp: test SECCOMP_USER_NOTIF_FLAG_CONTINUE
seccomp: simplify secure_computing()
seccomp: fix SECCOMP_USER_NOTIF_FLAG_CONTINUE test
seccomp: rework define for SECCOMP_USER_NOTIF_FLAG_CONTINUE
arch/arm/kernel/ptrace.c | 2 +-
arch/arm64/kernel/ptrace.c | 2 +-
arch/parisc/kernel/ptrace.c | 2 +-
arch/s390/kernel/ptrace.c | 2 +-
arch/um/kernel/skas/syscall.c | 2 +-
arch/x86/entry/vsyscall/vsyscall_64.c | 2 +-
include/linux/seccomp.h | 6 +-
include/uapi/linux/seccomp.h | 29 +++++++
kernel/seccomp.c | 28 +++++--
tools/testing/selftests/seccomp/seccomp_bpf.c | 110 +++++++++++++++++++++++++-
10 files changed, 169 insertions(+), 16 deletions(-)
--
Kees Cook
Hi,
OK, here is v7, maybe this is the last one. The corresponding git repo
and branch is:
git@github.com:johnhubbard/linux.git pin_user_pages_tracking_v7
Ira, you reviewed the gup_benchmark patches a bit earlier, but I
removed one or two of those review-by tags, due to invasive changes
I made after your review (in response to further reviews).
So could you please reply to any patches you'd like to have
reviewed-by's restoredto, if any? Mainly I'm thinking of
"mm/gup_benchmark: support pin_user_pages() and related calls". Also
various FOLL_LONGTERM vs pin_longterm*() patches.
The following blurb from the v6 cover letter is still applicable, and
I'll repeat it here so it doesn't get lost in the patch blizzard:
Christoph Hellwig has a preference to do things a little differently,
for the devmap cleanup in patch 5 ("mm: devmap: refactor 1-based
refcounting for ZONE_DEVICE pages"). That came up in a different
review thread, because the patch is out for review in two locations.
Here's that review thread:
https://lore.kernel.org/r/20191118070826.GB3099@infradead.org
...and I'm hoping that we can defer that request, because otherwise
it derails this series, which is starting to otherwise look like
it could be ready for 5.5.
Changes since v6:
* Renamed a couple of routines, to get rid of unnecessary leading
underscores:
__pin_compound_head() --> grab_compound_head()
__record_subpages() --> record_subpages()
* Fixed the error fallback (put_compound_head()) so as to match the fix
in the previous version: need to put back N * GUP_PIN_COUNTING_BIAS
pages, for FOLL_PIN cases.
* Factored out yet another common chunk of code, into a new grab_page()
routine.
* Added a missing compound_head() call to put_compound_head().
* [Re-]added Jens Axboe's reviewed-by tag to the fs/io_uring patch.
* Added more reviewed-by's from Jan Kara.
Changes since v5:
* Fixed the refcounting for huge pages: in most cases, it was
only taking one GUP_PIN_COUNTING_BIAS's worth of refs, when it
should have been taking one GUP_PIN_COUNTING_BIAS for each subpage.
(Much thanks to Jan Kara for spotting that one!)
* Renamed user_page_ref_inc() to try_pin_page(), and added a new
try_pin_compound_head(). This definitely improves readability.
* Factored out some more duplication in the FOLL_PIN and FOLL_GET
cases, in gup.c.
* Fixed up some straggling "get_" --> "pin_" references in the comments.
* Added reviewed-by tags.
Changes since v4:
* Renamed put_user_page*() --> unpin_user_page().
* Removed all pin_longterm_pages*() calls. We will use FOLL_LONGTERM
at the call sites. (FOLL_PIN, however, remains an internal gup flag).
This is very nice: many patches just change three characters now:
get_user_pages --> pin_user_pages. I think we've found the right
balance of wrapper calls and gup flags, for the call sites.
* Updated a lot of documentation and commit logs to match the above
two large changes.
* Changed gup_benchmark tests and run_vmtests, to adapt to one less
use case: there is no pin_longterm_pages() call anymore.
* This includes a new devmap cleanup patch from Dan Williams, along
with a rebased follow-up: patches 4 and 5, already mentioned above.
* Fixed patch 10 ("mm/gup: introduce pin_user_pages*() and FOLL_PIN"),
so as to make pin_user_pages*() calls act as placeholders for the
corresponding get_user_pages*() calls, until a later patch fully
implements the DMA-pinning functionality.
Thanks to Jan Kara for noticing that.
* Fixed the implementation of pin_user_pages_remote().
* Further tweaked patch 2 ("mm/gup: factor out duplicate code from four
routines"), in response to Jan Kara's feedback.
* Dropped a few reviewed-by tags due to changes that invalidated
them.
Changes since v3:
* VFIO fix (patch 8): applied further cleanup: removed a pre-existing,
unnecessary release and reacquire of mmap_sem. Moved the DAX vma
checks from the vfio call site, to gup internals, and added comments
(and commit log) to clarify.
* Due to the above, made a corresponding fix to the
pin_longterm_pages_remote(), which was actually calling the wrong
gup internal function.
* Changed put_user_page() comments, to refer to pin*() APIs, rather than
get_user_pages*() APIs.
* Reverted an accidental whitespace-only change in the IB ODP code.
* Added a few more reviewed-by tags.
Changes since v2:
* Added a patch to convert IB/umem from normal gup, to gup_fast(). This
is also posted separately, in order to hopefully get some runtime
testing.
* Changed the page devmap code to be a little clearer,
thanks to Jerome for that.
* Split out the page devmap changes into a separate patch (and moved
Ira's Signed-off-by to that patch).
* Fixed my bug in IB: ODP code does not require pin_user_pages()
semantics. Therefore, revert the put_user_page() calls to put_page(),
and leave the get_user_pages() call as-is.
* As part of the revert, I am proposing here a change directly
from put_user_pages(), to release_pages(). I'd feel better if
someone agrees that this is the best way. It uses the more
efficient release_pages(), instead of put_page() in a loop,
and keep the change to just a few character on one line,
but OTOH it is not a pure revert.
* Loosened the FOLL_LONGTERM restrictions in the
__get_user_pages_locked() implementation, and used that in order
to fix up a VFIO bug. Thanks to Jason for that idea.
* Note the use of release_pages() in IB: is that OK?
* Added a few more WARN's and clarifying comments nearby.
* Many documentation improvements in various comments.
* Moved the new pin_user_pages.rst from Documentation/vm/ to
Documentation/core-api/ .
* Commit descriptions: added clarifying notes to the three patches
(drm/via, fs/io_uring, net/xdp) that already had put_user_page()
calls in place.
* Collected all pending Reviewed-by and Acked-by tags, from v1 and v2
email threads.
* Lot of churn from v2 --> v3, so it's possible that new bugs
sneaked in.
NOT DONE: separate patchset is required:
* __get_user_pages_locked(): stop compensating for
buggy callers who failed to set FOLL_GET. Instead, assert
that FOLL_GET is set (and fail if it's not).
======================================================================
Original cover letter (edited to fix up the patch description numbers)
This applies cleanly to linux-next and mmotm, and also to linux.git if
linux-next's commit 20cac10710c9 ("mm/gup_benchmark: fix MAP_HUGETLB
case") is first applied there.
This provides tracking of dma-pinned pages. This is a prerequisite to
solving the larger problem of proper interactions between file-backed
pages, and [R]DMA activities, as discussed in [1], [2], [3], and in
a remarkable number of email threads since about 2017. :)
A new internal gup flag, FOLL_PIN is introduced, and thoroughly
documented in the last patch's Documentation/vm/pin_user_pages.rst.
I believe that this will provide a good starting point for doing the
layout lease work that Ira Weiny has been working on. That's because
these new wrapper functions provide a clean, constrained, systematically
named set of functionality that, again, is required in order to even
know if a page is "dma-pinned".
In contrast to earlier approaches, the page tracking can be
incrementally applied to the kernel call sites that, until now, have
been simply calling get_user_pages() ("gup"). In other words, opt-in by
changing from this:
get_user_pages() (sets FOLL_GET)
put_page()
to this:
pin_user_pages() (sets FOLL_PIN)
put_user_page()
Because there are interdependencies with FOLL_LONGTERM, a similar
conversion as for FOLL_PIN, was applied. The change was from this:
get_user_pages(FOLL_LONGTERM) (also sets FOLL_GET)
put_page()
to this:
pin_longterm_pages() (sets FOLL_PIN | FOLL_LONGTERM)
put_user_page()
============================================================
Patch summary:
* Patches 1-9: refactoring and preparatory cleanup, independent fixes
* Patch 10: introduce pin_user_pages(), FOLL_PIN, but no functional
changes yet
* Patches 11-16: Convert existing put_user_page() callers, to use the
new pin*()
* Patch 17: Activate tracking of FOLL_PIN pages.
* Patches 18-20: convert various callers
* Patches: 21-23: gup_benchmark and run_vmtests support
* Patch 24: rename put_user_page*() --> unpin_user_page*()
============================================================
Testing:
* I've done some overall kernel testing (LTP, and a few other goodies),
and some directed testing to exercise some of the changes. And as you
can see, gup_benchmark is enhanced to exercise this. Basically, I've been
able to runtime test the core get_user_pages() and pin_user_pages() and
related routines, but not so much on several of the call sites--but those
are generally just a couple of lines changed, each.
Not much of the kernel is actually using this, which on one hand
reduces risk quite a lot. But on the other hand, testing coverage
is low. So I'd love it if, in particular, the Infiniband and PowerPC
folks could do a smoke test of this series for me.
Also, my runtime testing for the call sites so far is very weak:
* io_uring: Some directed tests from liburing exercise this, and they pass.
* process_vm_access.c: A small directed test passes.
* gup_benchmark: the enhanced version hits the new gup.c code, and passes.
* infiniband (still only have crude "IB pingpong" working, on a
good day: it's not exercising my conversions at runtime...)
* VFIO: compiles (I'm vowing to set up a run time test soon, but it's
not ready just yet)
* powerpc: it compiles...
* drm/via: compiles...
* goldfish: compiles...
* net/xdp: compiles...
* media/v4l2: compiles...
============================================================
Next:
* Get the block/bio_vec sites converted to use pin_user_pages().
* Work with Ira and Dave Chinner to weave this together with the
layout lease stuff.
============================================================
[1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/
[2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/
[3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/
Dan Williams (1):
mm: Cleanup __put_devmap_managed_page() vs ->page_free()
John Hubbard (23):
mm/gup: pass flags arg to __gup_device_* functions
mm/gup: factor out duplicate code from four routines
mm/gup: move try_get_compound_head() to top, fix minor issues
mm: devmap: refactor 1-based refcounting for ZONE_DEVICE pages
goldish_pipe: rename local pin_user_pages() routine
IB/umem: use get_user_pages_fast() to pin DMA pages
media/v4l2-core: set pages dirty upon releasing DMA buffers
vfio, mm: fix get_user_pages_remote() and FOLL_LONGTERM
mm/gup: introduce pin_user_pages*() and FOLL_PIN
goldish_pipe: convert to pin_user_pages() and put_user_page()
IB/{core,hw,umem}: set FOLL_PIN via pin_user_pages*(), fix up ODP
mm/process_vm_access: set FOLL_PIN via pin_user_pages_remote()
drm/via: set FOLL_PIN via pin_user_pages_fast()
fs/io_uring: set FOLL_PIN via pin_user_pages()
net/xdp: set FOLL_PIN via pin_user_pages()
mm/gup: track FOLL_PIN pages
media/v4l2-core: pin_user_pages (FOLL_PIN) and put_user_page()
conversion
vfio, mm: pin_user_pages (FOLL_PIN) and put_user_page() conversion
powerpc: book3s64: convert to pin_user_pages() and put_user_page()
mm/gup_benchmark: use proper FOLL_WRITE flags instead of hard-coding
"1"
mm/gup_benchmark: support pin_user_pages() and related calls
selftests/vm: run_vmtests: invoke gup_benchmark with basic FOLL_PIN
coverage
mm, tree-wide: rename put_user_page*() to unpin_user_page*()
Documentation/core-api/index.rst | 1 +
Documentation/core-api/pin_user_pages.rst | 233 +++++++++
arch/powerpc/mm/book3s64/iommu_api.c | 12 +-
drivers/gpu/drm/via/via_dmablit.c | 6 +-
drivers/infiniband/core/umem.c | 19 +-
drivers/infiniband/core/umem_odp.c | 13 +-
drivers/infiniband/hw/hfi1/user_pages.c | 4 +-
drivers/infiniband/hw/mthca/mthca_memfree.c | 8 +-
drivers/infiniband/hw/qib/qib_user_pages.c | 4 +-
drivers/infiniband/hw/qib/qib_user_sdma.c | 8 +-
drivers/infiniband/hw/usnic/usnic_uiom.c | 4 +-
drivers/infiniband/sw/siw/siw_mem.c | 4 +-
drivers/media/v4l2-core/videobuf-dma-sg.c | 8 +-
drivers/nvdimm/pmem.c | 6 -
drivers/platform/goldfish/goldfish_pipe.c | 35 +-
drivers/vfio/vfio_iommu_type1.c | 35 +-
fs/io_uring.c | 6 +-
include/linux/mm.h | 195 ++++++-
include/linux/mmzone.h | 2 +
include/linux/page_ref.h | 10 +
mm/gup.c | 553 +++++++++++++++-----
mm/gup_benchmark.c | 74 ++-
mm/huge_memory.c | 44 +-
mm/hugetlb.c | 36 +-
mm/memremap.c | 76 ++-
mm/process_vm_access.c | 28 +-
mm/vmstat.c | 2 +
net/xdp/xdp_umem.c | 4 +-
tools/testing/selftests/vm/gup_benchmark.c | 21 +-
tools/testing/selftests/vm/run_vmtests | 22 +
30 files changed, 1121 insertions(+), 352 deletions(-)
create mode 100644 Documentation/core-api/pin_user_pages.rst
--
2.24.0
USER_NOTIF_MAGIC is used to both initialize seccomp_notif_resp::val and
verify syscall resturn value. On 32-bit architectures syscall return
value has type long, but the value of USER_NOTIF_MAGIC has type long
long because it doesn't fit into long. As a result all syscall return
value comparisons with USER_NOTIF_MAGIC are false. This is also reported
by the compiler when '-W' is added to CFLAGS.
Add explicit type cast to USER_NOTIF_MAGIC definition.
This fixes the following seccomp_bpf tests on 32-bit architectures:
global.user_notification_basic
global.user_notification_child_pid_ns
global.user_notification_sibling_pid_ns
global.user_notification_fault_recv
Signed-off-by: Max Filippov <jcmvbkbc(a)gmail.com>
---
tools/testing/selftests/seccomp/seccomp_bpf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index 7f8b5c8982e3..16cc30e2ade4 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -3077,7 +3077,7 @@ static int user_trap_syscall(int nr, unsigned int flags)
return seccomp(SECCOMP_SET_MODE_FILTER, flags, &prog);
}
-#define USER_NOTIF_MAGIC 116983961184613L
+#define USER_NOTIF_MAGIC ((unsigned long)116983961184613L)
TEST(user_notification_basic)
{
pid_t pid;
--
2.20.1
