- Linux-kselftest-mirror - lists.linaro.org

[PATCH 6.13 580/623] selftests/rseq: Fix handling of glibc without rseq support

by Greg Kroah-Hartman

6.13-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> commit 336d02bc4c6bec5c3d933e5d470a94970f830957 upstream. When porting librseq commit: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") from librseq to the kernel selftests, the following line was missed at the end of rseq_init(): rseq_size = get_rseq_kernel_feature_size(); which effectively leaves rseq_size initialized to -1U when glibc does not have rseq support. glibc supports rseq from version 2.35 onwards. In a following librseq commit commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") to mimic the libc behavior, a new approach is taken: don't set the feature size in 'rseq_size' until at least one thread has successfully registered. This allows using 'rseq_size' in fast-paths to test for both registration status and available features. The caveat is that on libc either all threads are registered or none are, while with bare librseq it is the responsability of the user to register all threads using rseq. This combines the changes from the following librseq git commits: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") Fixes: a0cc649353bb ("selftests/rseq: Fix mm_cid test failure") Reported-by: Raghavendra Rao Ananta <rananta(a)google.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Raghavendra Rao Ananta <rananta(a)google.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Carlos O'Donell <carlos(a)redhat.com> Cc: Florian Weimer <fweimer(a)redhat.com> Cc: Michael Jeanson <mjeanson(a)efficios.com> Cc: linux-kselftest(a)vger.kernel.org Cc: stable(a)vger.kernel.org Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/rseq/rseq.c | 32 +++++++++++++++++++++++++------- tools/testing/selftests/rseq/rseq.h | 9 ++++++++- 2 files changed, 33 insertions(+), 8 deletions(-) --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -61,7 +61,6 @@ unsigned int rseq_size = -1U; unsigned int rseq_flags; static int rseq_ownership; -static int rseq_reg_success; /* At least one rseq registration has succeded. */ /* Allocate a large area for the TLS. */ #define RSEQ_THREAD_AREA_ALLOC_SIZE 1024 @@ -152,14 +151,27 @@ int rseq_register_current_thread(void) } rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { - if (RSEQ_READ_ONCE(rseq_reg_success)) { + /* + * After at least one thread has registered successfully + * (rseq_size > 0), the registration of other threads should + * never fail. + */ + if (RSEQ_READ_ONCE(rseq_size) > 0) { /* Incoherent success/failure within process. */ abort(); } return -1; } assert(rseq_current_cpu_raw() >= 0); - RSEQ_WRITE_ONCE(rseq_reg_success, 1); + + /* + * The first thread to register sets the rseq_size to mimic the libc + * behavior. + */ + if (RSEQ_READ_ONCE(rseq_size) == 0) { + RSEQ_WRITE_ONCE(rseq_size, get_rseq_kernel_feature_size()); + } + return 0; } @@ -235,12 +247,18 @@ void rseq_init(void) return; } rseq_ownership = 1; - if (!rseq_available()) { - rseq_size = 0; - return; - } + + /* Calculate the offset of the rseq area from the thread pointer. */ rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); + + /* rseq flags are deprecated, always set to 0. */ rseq_flags = 0; + + /* + * Set the size to 0 until at least one thread registers to mimic the + * libc behavior. + */ + rseq_size = 0; } static __attribute__((destructor)) --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -60,7 +60,14 @@ extern ptrdiff_t rseq_offset; /* - * Size of the registered rseq area. 0 if the registration was + * The rseq ABI is composed of extensible feature fields. The extensions + * are done by appending additional fields at the end of the structure. + * The rseq_size defines the size of the active feature set which can be + * used by the application for the current rseq registration. Features + * starting at offset >= rseq_size are inactive and should not be used. + * + * The rseq_size is the intersection between the available allocation + * size for the rseq area and the feature size supported by the kernel. * unsuccessful. */ extern unsigned int rseq_size;

4 months, 4 weeks

1
0
0 0

[PATCH 6.12 546/590] selftests/rseq: Fix handling of glibc without rseq support

by Greg Kroah-Hartman

6.12-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> commit 336d02bc4c6bec5c3d933e5d470a94970f830957 upstream. When porting librseq commit: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") from librseq to the kernel selftests, the following line was missed at the end of rseq_init(): rseq_size = get_rseq_kernel_feature_size(); which effectively leaves rseq_size initialized to -1U when glibc does not have rseq support. glibc supports rseq from version 2.35 onwards. In a following librseq commit commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") to mimic the libc behavior, a new approach is taken: don't set the feature size in 'rseq_size' until at least one thread has successfully registered. This allows using 'rseq_size' in fast-paths to test for both registration status and available features. The caveat is that on libc either all threads are registered or none are, while with bare librseq it is the responsability of the user to register all threads using rseq. This combines the changes from the following librseq git commits: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") Fixes: a0cc649353bb ("selftests/rseq: Fix mm_cid test failure") Reported-by: Raghavendra Rao Ananta <rananta(a)google.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Raghavendra Rao Ananta <rananta(a)google.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Carlos O'Donell <carlos(a)redhat.com> Cc: Florian Weimer <fweimer(a)redhat.com> Cc: Michael Jeanson <mjeanson(a)efficios.com> Cc: linux-kselftest(a)vger.kernel.org Cc: stable(a)vger.kernel.org Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/rseq/rseq.c | 32 +++++++++++++++++++++++++------- tools/testing/selftests/rseq/rseq.h | 9 ++++++++- 2 files changed, 33 insertions(+), 8 deletions(-) --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -61,7 +61,6 @@ unsigned int rseq_size = -1U; unsigned int rseq_flags; static int rseq_ownership; -static int rseq_reg_success; /* At least one rseq registration has succeded. */ /* Allocate a large area for the TLS. */ #define RSEQ_THREAD_AREA_ALLOC_SIZE 1024 @@ -152,14 +151,27 @@ int rseq_register_current_thread(void) } rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { - if (RSEQ_READ_ONCE(rseq_reg_success)) { + /* + * After at least one thread has registered successfully + * (rseq_size > 0), the registration of other threads should + * never fail. + */ + if (RSEQ_READ_ONCE(rseq_size) > 0) { /* Incoherent success/failure within process. */ abort(); } return -1; } assert(rseq_current_cpu_raw() >= 0); - RSEQ_WRITE_ONCE(rseq_reg_success, 1); + + /* + * The first thread to register sets the rseq_size to mimic the libc + * behavior. + */ + if (RSEQ_READ_ONCE(rseq_size) == 0) { + RSEQ_WRITE_ONCE(rseq_size, get_rseq_kernel_feature_size()); + } + return 0; } @@ -235,12 +247,18 @@ void rseq_init(void) return; } rseq_ownership = 1; - if (!rseq_available()) { - rseq_size = 0; - return; - } + + /* Calculate the offset of the rseq area from the thread pointer. */ rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); + + /* rseq flags are deprecated, always set to 0. */ rseq_flags = 0; + + /* + * Set the size to 0 until at least one thread registers to mimic the + * libc behavior. + */ + rseq_size = 0; } static __attribute__((destructor)) --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -60,7 +60,14 @@ extern ptrdiff_t rseq_offset; /* - * Size of the registered rseq area. 0 if the registration was + * The rseq ABI is composed of extensible feature fields. The extensions + * are done by appending additional fields at the end of the structure. + * The rseq_size defines the size of the active feature set which can be + * used by the application for the current rseq registration. Features + * starting at offset >= rseq_size are inactive and should not be used. + * + * The rseq_size is the intersection between the available allocation + * size for the rseq area and the feature size supported by the kernel. * unsuccessful. */ extern unsigned int rseq_size;

4 months, 4 weeks

1
0
0 0

[PATCH 6.6 372/393] selftests/rseq: Fix handling of glibc without rseq support

by Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> commit 336d02bc4c6bec5c3d933e5d470a94970f830957 upstream. When porting librseq commit: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") from librseq to the kernel selftests, the following line was missed at the end of rseq_init(): rseq_size = get_rseq_kernel_feature_size(); which effectively leaves rseq_size initialized to -1U when glibc does not have rseq support. glibc supports rseq from version 2.35 onwards. In a following librseq commit commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") to mimic the libc behavior, a new approach is taken: don't set the feature size in 'rseq_size' until at least one thread has successfully registered. This allows using 'rseq_size' in fast-paths to test for both registration status and available features. The caveat is that on libc either all threads are registered or none are, while with bare librseq it is the responsability of the user to register all threads using rseq. This combines the changes from the following librseq git commits: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") Fixes: a0cc649353bb ("selftests/rseq: Fix mm_cid test failure") Reported-by: Raghavendra Rao Ananta <rananta(a)google.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Raghavendra Rao Ananta <rananta(a)google.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Carlos O'Donell <carlos(a)redhat.com> Cc: Florian Weimer <fweimer(a)redhat.com> Cc: Michael Jeanson <mjeanson(a)efficios.com> Cc: linux-kselftest(a)vger.kernel.org Cc: stable(a)vger.kernel.org Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/rseq/rseq.c | 32 ++++++++++++++++++++++------- tools/testing/selftests/rseq/rseq.h | 9 +++++++- 2 files changed, 33 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq.c b/tools/testing/selftests/rseq/rseq.c index 5b9772cdf265..f6156790c3b4 100644 --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -61,7 +61,6 @@ unsigned int rseq_size = -1U; unsigned int rseq_flags; static int rseq_ownership; -static int rseq_reg_success; /* At least one rseq registration has succeded. */ /* Allocate a large area for the TLS. */ #define RSEQ_THREAD_AREA_ALLOC_SIZE 1024 @@ -152,14 +151,27 @@ int rseq_register_current_thread(void) } rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { - if (RSEQ_READ_ONCE(rseq_reg_success)) { + /* + * After at least one thread has registered successfully + * (rseq_size > 0), the registration of other threads should + * never fail. + */ + if (RSEQ_READ_ONCE(rseq_size) > 0) { /* Incoherent success/failure within process. */ abort(); } return -1; } assert(rseq_current_cpu_raw() >= 0); - RSEQ_WRITE_ONCE(rseq_reg_success, 1); + + /* + * The first thread to register sets the rseq_size to mimic the libc + * behavior. + */ + if (RSEQ_READ_ONCE(rseq_size) == 0) { + RSEQ_WRITE_ONCE(rseq_size, get_rseq_kernel_feature_size()); + } + return 0; } @@ -235,12 +247,18 @@ void rseq_init(void) return; } rseq_ownership = 1; - if (!rseq_available()) { - rseq_size = 0; - return; - } + + /* Calculate the offset of the rseq area from the thread pointer. */ rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); + + /* rseq flags are deprecated, always set to 0. */ rseq_flags = 0; + + /* + * Set the size to 0 until at least one thread registers to mimic the + * libc behavior. + */ + rseq_size = 0; } static __attribute__((destructor)) diff --git a/tools/testing/selftests/rseq/rseq.h b/tools/testing/selftests/rseq/rseq.h index 4e217b620e0c..062d10925a10 100644 --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -60,7 +60,14 @@ extern ptrdiff_t rseq_offset; /* - * Size of the registered rseq area. 0 if the registration was + * The rseq ABI is composed of extensible feature fields. The extensions + * are done by appending additional fields at the end of the structure. + * The rseq_size defines the size of the active feature set which can be + * used by the application for the current rseq registration. Features + * starting at offset >= rseq_size are inactive and should not be used. + * + * The rseq_size is the intersection between the available allocation + * size for the rseq area and the feature size supported by the kernel. * unsuccessful. */ extern unsigned int rseq_size; -- 2.48.1

4 months, 4 weeks

1
0
0 0

[PATCH net-next v3 00/10] Some pktgen fixes/improvments

by Peter Seiderer

While taking a look at '[PATCH net] pktgen: Avoid out-of-range in get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds access in get_imix_entries' ([2], [3]) and doing some tests and code review I detected that the /proc/net/pktgen/... parsing logic does not honour the user given buffer bounds (resulting in out-of-bounds access). This can be observed e.g. by the following simple test (sometimes the old/'longer' previous value is re-read from the buffer): $ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0 $ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 123 max_pkt_size: 0 Result: OK: min_pkt_size=123 So fix the out-of-bounds access (and some minor findings) and add a simple proc_net_pktgen selftest... Regards, Peter Changes v2 -> v3: - new patch: 'net: pktgen: fix ctrl interface command parsing' - new patch: 'net: pktgen: fix mpls reset parsing' - tools/testing/selftests/net/proc_net_pktgen.c: - fix typo in change description ('v1 -> v1' and tyop) - rename some vars to better match usage add_loopback_0 -> thr_cmd_add_loopback_0 rm_loopback_0 -> thr_cmd_rm_loopback_0 wrong_ctrl_cmd -> wrong_thr_cmd legacy_ctrl_cmd -> legacy_thr_cmd ctrl_fd -> thr_fd - add ctrl interface tests Changes v1 -> v2: - new patch: 'net: pktgen: fix hex32_arg parsing for short reads' - new patch: 'net: pktgen: fix 'rate 0' error handling (return -EINVAL)' - new patch: 'net: pktgen: fix 'ratep 0' error handling (return -EINVAL)' - net/core/pktgen.c: additional fix get_imix_entries() and get_labels() - tools/testing/selftests/net/proc_net_pktgen.c: - fix tyop not vs. nod (suggested by Jakub Kicinski) - fix misaligned line (suggested by Jakub Kicinski) - enable fomerly commented out CONFIG_XFRM dependent test (command spi), as CONFIG_XFRM is enabled via tools/testing/selftests/net/config CONFIG_XFRM_INTERFACE/CONFIG_XFRM_USER (suggestex by Jakub Kicinski) - add CONFIG_NET_PKTGEN=m to tools/testing/selftests/net/config (suggested by Jakub Kicinski) - add modprobe pktgen to FIXTURE_SETUP() (suggested by Jakub Kicinski) - fix some checkpatch warnings (Missing a blank line after declarations) - shrink line length by re-naming some variables (command -> cmd, device -> dev) - add 'rate 0' testcase - add 'ratep 0' testcase [1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@re… [2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/ [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Peter Seiderer (10): net: pktgen: replace ENOTSUPP with EOPNOTSUPP net: pktgen: enable 'param=value' parsing net: pktgen: fix hex32_arg parsing for short reads net: pktgen: fix 'rate 0' error handling (return -EINVAL) net: pktgen: fix 'ratep 0' error handling (return -EINVAL) net: pktgen: fix ctrl interface command parsing net: pktgen: fix access outside of user given buffer in pktgen_thread_write() net: pktgen: fix access outside of user given buffer in pktgen_if_write() net: pktgen: fix mpls reset parsing selftest: net: add proc_net_pktgen net/core/pktgen.c | 257 ++++--- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 1 + tools/testing/selftests/net/proc_net_pktgen.c | 650 ++++++++++++++++++ 4 files changed, 819 insertions(+), 90 deletions(-) create mode 100644 tools/testing/selftests/net/proc_net_pktgen.c -- 2.48.1

4 months, 4 weeks

3
23
0 0

[PATCH] selftests/mm: Fix thuge-gen test name uniqueness

by Mark Brown

The thuge-gen test_mmap() and test_shmget() tests are repeatedly run for a variety of sizes but always report the result of their test with the same name, meaning that automated sysetms running the tests are unable to distinguish between the various tests. Add the supplied sizes to the logged test names to distinguish between runs. Fixes: b38bd9b2c448 ("selftests/mm: thuge-gen: conform to TAP format output") Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/mm/thuge-gen.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/mm/thuge-gen.c b/tools/testing/selftests/mm/thuge-gen.c index e4370b79b62ffb133056eb843cdd1eaeba6503df..cd5174d735be405220d99ae796a3768f53df6ea4 100644 --- a/tools/testing/selftests/mm/thuge-gen.c +++ b/tools/testing/selftests/mm/thuge-gen.c @@ -127,7 +127,7 @@ void test_mmap(unsigned long size, unsigned flags) show(size); ksft_test_result(size == getpagesize() || (before - after) == NUM_PAGES, - "%s mmap\n", __func__); + "%s mmap %lu\n", __func__, size); if (munmap(map, size * NUM_PAGES)) ksft_exit_fail_msg("%s: unmap %s\n", __func__, strerror(errno)); @@ -165,7 +165,7 @@ void test_shmget(unsigned long size, unsigned flags) show(size); ksft_test_result(size == getpagesize() || (before - after) == NUM_PAGES, - "%s: mmap\n", __func__); + "%s: mmap %lu\n", __func__, size); if (shmdt(map)) ksft_exit_fail_msg("%s: shmdt: %s\n", __func__, strerror(errno)); } --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250204-kselftest-mm-fix-dups-076a48577184 Best regards, -- Mark Brown <broonie(a)kernel.org>

4 months, 4 weeks

3
3
0 0

[PATCH] selftests: pidfd: Fix compiling warning of pidfs_setns

by I Hsin Cheng

In the compilation of pidfs_setns_test.c , a warning as the following will pop out. pidfd_setns_test.c: In function ‘current_nsset_setup’: pidfd_setns_test.c:173:54: warning: implicit declaration of function \ ‘ioctl’ [-Wimplicit-function-declaration] 173 | self->child_pidfd_derived_nsfds[i] = \ ioctl(self->pidfd, info->pidfd_ioctl, 0); It's caused by wrong import of header file <linux/ioctl.h>, fix it to <sys/ioctl.h>. Signed-off-by: I Hsin Cheng <richard120310(a)gmail.com> --- tools/testing/selftests/pidfd/pidfd_setns_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/pidfd/pidfd_setns_test.c b/tools/testing/selftests/pidfd/pidfd_setns_test.c index 7c2a43491..3ed42f1eb 100644 --- a/tools/testing/selftests/pidfd/pidfd_setns_test.c +++ b/tools/testing/selftests/pidfd/pidfd_setns_test.c @@ -16,7 +16,7 @@ #include <unistd.h> #include <sys/socket.h> #include <sys/stat.h> -#include <linux/ioctl.h> +#include <sys/ioctl.h> #include "pidfd.h" #include "../clone3/clone3_selftests.h" -- 2.43.0

4 months, 4 weeks

2
1
0 0

[PATCH net 0/2] bonding: fix incorrect mac address setting

by Hangbin Liu

The mac address on backup slave should be convert from Solicited-Node Multicast address, not from bonding unicast target address. Hangbin Liu (2): bonding: fix incorrect MAC address setting to receive NA messages selftests: bonding: fix incorrect mac address drivers/net/bonding/bond_options.c | 4 +++- tools/testing/selftests/drivers/net/bonding/bond_options.sh | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) -- 2.39.5 (Apple Git-154)

4 months, 4 weeks

1
3
0 0

[PATCH 0/2] tools/nolibc: support for 32-bit s390

by Thomas Weißschuh

Support for 32-bit s390 is very easy to implement and useful for testing. For example I used to test some generic compat_ptr() logic, which is only testable on 32-bit s390. The series depends on my other series "selftests/nolibc: test kernel configuration cleanups". (It's not a hard dependency, only a minor diff conflict) Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Thomas Weißschuh (2): selftests/nolibc: rename s390 to s390x tools/nolibc: add support for 32-bit s390 tools/include/nolibc/arch-s390.h | 5 +++++ tools/include/nolibc/arch.h | 2 +- tools/testing/selftests/nolibc/Makefile | 10 ++++++++-- tools/testing/selftests/nolibc/run-tests.sh | 8 +++++++- 4 files changed, 21 insertions(+), 4 deletions(-) --- base-commit: 0597614d84c8593ba906418bf3c0c0de1e02e82a change-id: 20250122-nolibc-s390-e57141682c88 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

4 months, 4 weeks

3
4
0 0

[PATCH net-next] netconsole: selftest: Add test for fragmented messages

by Breno Leitao

Add a new selftest to verify netconsole's handling of messages that exceed the packet size limit and require fragmentation. The test sends messages with varying sizes and userdata, validating that: 1. Large messages are correctly fragmented and reassembled 2. Userdata fields are properly preserved across fragments 3. Messages work correctly with and without kernel release version appending The test creates a networking environment using netdevsim, sends messages through /dev/kmsg, and verifies the received fragments maintain message integrity. Signed-off-by: Breno Leitao <leitao(a)debian.org> Reviewed-by: Simon Horman <horms(a)kernel.org> --- Changes compared to RFC - Removed the long-line comment (Simon) - Added Simon's reviwed-by tag. - Link to v1: https://lore.kernel.org/r/20250131-netcons_frag_msgs-v1-1-0de83bf2a7e6@debi… --- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 7 ++ .../drivers/net/netcons_fragmented_msg.sh | 122 +++++++++++++++++++++ 3 files changed, 130 insertions(+) diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index 137470bdee0c7fd2517bd1baafc12d575de4b4ac..c7f1c443f2af091aa13f67dd1df9ae05d7a43f40 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -7,6 +7,7 @@ TEST_INCLUDES := $(wildcard lib/py/*.py) \ TEST_PROGS := \ netcons_basic.sh \ + netcons_fragmented_msg.sh \ netcons_overflow.sh \ ping.py \ queues.py \ diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh index 3acaba41ac7b21aa2fd8457ed640a5ac8a41bc12..0c262b123fdd3082c40b2bd899ec626d223226ed 100644 --- a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh +++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh @@ -110,6 +110,13 @@ function create_dynamic_target() { echo 1 > "${NETCONS_PATH}"/enabled } +# Do not append the release to the header of the message +function disable_release_append() { + echo 0 > "${NETCONS_PATH}"/enabled + echo 0 > "${NETCONS_PATH}"/release + echo 1 > "${NETCONS_PATH}"/enabled +} + function cleanup() { local NSIM_DEV_SYS_DEL="/sys/bus/netdevsim/del_device" diff --git a/tools/testing/selftests/drivers/net/netcons_fragmented_msg.sh b/tools/testing/selftests/drivers/net/netcons_fragmented_msg.sh new file mode 100755 index 0000000000000000000000000000000000000000..4a71e01a230c75c14147a9937920fe0b68a0926a --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_fragmented_msg.sh @@ -0,0 +1,122 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# Test netconsole's message fragmentation functionality. +# +# When a message exceeds the maximum packet size, netconsole splits it into +# multiple fragments for transmission. This test verifies: +# - Correct fragmentation of large messages +# - Proper reassembly of fragments at the receiver +# - Preservation of userdata across fragments +# - Behavior with and without kernel release version appending +# +# Author: Breno Leitao <leitao(a)debian.org> + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +source "${SCRIPTDIR}"/lib/sh/lib_netcons.sh + +modprobe netdevsim 2> /dev/null || true +modprobe netconsole 2> /dev/null || true + +# The content of kmsg will be save to the following file +OUTPUT_FILE="/tmp/${TARGET}" + +# set userdata to a long value. In this case, it is "1-2-3-4...50-" +USERDATA_VALUE=$(printf -- '%.2s-' {1..60}) + +# Convert the header string in a regexp, so, we can remove +# the second header as well. +# A header looks like "13,468,514729715,-,ncfrag=0/1135;". If +# release is appended, you might find something like:L +# "6.13.0-04048-g4f561a87745a,13,468,514729715,-,ncfrag=0/1135;" +function header_to_regex() { + # header is everything before ; + local HEADER="${1}" + REGEX=$(echo "${HEADER}" | cut -d'=' -f1) + echo "${REGEX}=[0-9]*\/[0-9]*;" +} + +# We have two headers in the message. Remove both to get the full message, +# and extract the full message. +function extract_msg() { + local MSGFILE="${1}" + # Extract the header, which is the very first thing that arrives in the + # first list. + HEADER=$(sed -n '1p' "${MSGFILE}" | cut -d';' -f1) + HEADER_REGEX=$(header_to_regex "${HEADER}") + + # Remove the two headers from the received message + # This will return the message without any header, similarly to what + # was sent. + sed "s/""${HEADER_REGEX}""//g" "${MSGFILE}" +} + +# Validate the message, which has two messages glued together. +# unwrap them to make sure all the characters were transmitted. +# File will look like the following: +# 13,468,514729715,-,ncfrag=0/1135;<message> +# key=<part of key>-13,468,514729715,-,ncfrag=967/1135;<rest of the key> +function validate_fragmented_result() { + # Discard the netconsole headers, and assemble the full message + RCVMSG=$(extract_msg "${1}") + + # check for the main message + if ! echo "${RCVMSG}" | grep -q "${MSG}"; then + echo "Message body doesn't match." >&2 + echo "msg received=" "${RCVMSG}" >&2 + exit "${ksft_fail}" + fi + + # check userdata + if ! echo "${RCVMSG}" | grep -q "${USERDATA_VALUE}"; then + echo "message userdata doesn't match" >&2 + echo "msg received=" "${RCVMSG}" >&2 + exit "${ksft_fail}" + fi + # test passed. hooray +} + +# Check for basic system dependency and exit if not found +check_for_dependencies +# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5) +echo "6 5" > /proc/sys/kernel/printk +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup EXIT +# Create one namespace and two interfaces +set_network +# Create a dynamic target for netconsole +create_dynamic_target +# Set userdata "key" with the "value" value +set_user_data + + +# TEST 1: Send message and userdata. They will fragment +# ======= +MSG=$(printf -- 'MSG%.3s=' {1..150}) + +# Listen for netconsole port inside the namespace and destination interface +listen_port_and_save_to "${OUTPUT_FILE}" & +# Wait for socat to start and listen to the port. +wait_local_port_listen "${NAMESPACE}" "${PORT}" udp +# Send the message +echo "${MSG}: ${TARGET}" > /dev/kmsg +# Wait until socat saves the file to disk +busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" +# Check if the message was not corrupted +validate_fragmented_result "${OUTPUT_FILE}" + +# TEST 2: Test with smaller message, and without release appended +# ======= +MSG=$(printf -- 'FOOBAR%.3s=' {1..100}) +# Let's disable release and test again. +disable_release_append + +listen_port_and_save_to "${OUTPUT_FILE}" & +wait_local_port_listen "${NAMESPACE}" "${PORT}" udp +echo "${MSG}: ${TARGET}" > /dev/kmsg +busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" +validate_fragmented_result "${OUTPUT_FILE}" +exit "${ksft_pass}" --- base-commit: 0ad9617c78acbc71373fb341a6f75d4012b01d69 change-id: 20250129-netcons_frag_msgs-91506d136f50 Best regards, -- Breno Leitao <leitao(a)debian.org>

5 months

2
1
0 0

[PATCH] selftests/cgroup: use bash in test_cpuset_v1_hp.sh

by Bharadwaj Raju

The script uses non-POSIX features like `[[` for conditionals and hence does not work when run with a POSIX /bin/sh. Change the shebang to /bin/bash instead, like the other tests in cgroup. Signed-off-by: Bharadwaj Raju <bharadwaj.raju777(a)gmail.com> --- tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh b/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh index 3f45512fb512..7406c24be1ac 100755 --- a/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh +++ b/tools/testing/selftests/cgroup/test_cpuset_v1_hp.sh @@ -1,4 +1,4 @@ -#!/bin/sh +#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # # Test the special cpuset v1 hotplug case where a cpuset become empty of -- 2.43.0

5 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror