- Linux-kselftest-mirror - lists.linaro.org

[PATCH v2] drm/tests: Drop drm_kunit_helper_acquire_ctx_alloc()

by Maxime Ripard

lockdep complains when a lock is released in a separate thread the lock is taken in, and it turns out that kunit does run its actions in a separate thread than the test ran in. This means that drm_kunit_helper_acquire_ctx_alloc() just cannot work as it's supposed to, so let's just get rid of it. Suggested-by: Simona Vetter <simona.vetter(a)ffwll.ch> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Signed-off-by: Maxime Ripard <mripard(a)kernel.org> --- Changes from v1: - Reworded the commit log (Sima) --- drivers/gpu/drm/tests/drm_atomic_state_test.c | 24 +- .../drm/tests/drm_hdmi_state_helper_test.c | 254 +++++++++++------- drivers/gpu/drm/tests/drm_kunit_helpers.c | 41 --- .../gpu/drm/vc4/tests/vc4_test_pv_muxing.c | 46 ++-- include/drm/drm_kunit_helpers.h | 2 - 5 files changed, 191 insertions(+), 176 deletions(-) diff --git a/drivers/gpu/drm/tests/drm_atomic_state_test.c b/drivers/gpu/drm/tests/drm_atomic_state_test.c index 5945c3298901..2f6ac7a09f44 100644 --- a/drivers/gpu/drm/tests/drm_atomic_state_test.c +++ b/drivers/gpu/drm/tests/drm_atomic_state_test.c @@ -187,11 +187,11 @@ static int set_up_atomic_state(struct kunit *test, * connectors are changed but the CRTC mode is not. */ static void drm_test_check_connector_changed_modeset(struct kunit *test) { struct drm_atomic_test_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector *old_conn, *new_conn; struct drm_atomic_state *state; struct drm_device *drm; struct drm_connector_state *new_conn_state, *old_conn_state; int ret, initial_modeset_count; @@ -201,18 +201,17 @@ static void drm_test_check_connector_changed_modeset(struct kunit *test) drm = &priv->drm; old_conn = &priv->connectors[0]; new_conn = &priv->connectors[1]; - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); // first modeset to enable - ret = set_up_atomic_state(test, priv, old_conn, ctx); + ret = set_up_atomic_state(test, priv, old_conn, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); new_conn_state = drm_atomic_get_connector_state(state, new_conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state); @@ -229,10 +228,13 @@ static void drm_test_check_connector_changed_modeset(struct kunit *test) // modeset_disables is called as part of the atomic commit tail ret = drm_atomic_commit(state); KUNIT_ASSERT_EQ(test, ret, 0); KUNIT_ASSERT_EQ(test, modeset_counter, initial_modeset_count + 1); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that the drm_crtc_in_clone_mode() helper can detect if a given CRTC * state is in clone mode @@ -261,27 +263,26 @@ static void drm_test_check_in_clone_mode(struct kunit *test) static void drm_test_check_valid_clones(struct kunit *test) { int ret; const struct drm_clone_mode_test *param = test->param_value; struct drm_atomic_test_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_device *drm; struct drm_atomic_state *state; struct drm_crtc_state *crtc_state; priv = drm_atomic_test_init_drm_components(test, false); KUNIT_ASSERT_NOT_NULL(test, priv); drm = &priv->drm; - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = set_up_atomic_state(test, priv, NULL, ctx); + ret = set_up_atomic_state(test, priv, NULL, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); crtc_state = drm_atomic_get_crtc_state(state, priv->crtc); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state); @@ -290,10 +291,13 @@ static void drm_test_check_valid_clones(struct kunit *test) // force modeset crtc_state->mode_changed = true; ret = drm_atomic_helper_check_modeset(drm, state); KUNIT_ASSERT_EQ(test, ret, param->expected_result); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } static void drm_check_in_clone_mode_desc(const struct drm_clone_mode_test *t, char *desc) { diff --git a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c index 23ecc00accb2..e97efd3af9ed 100644 --- a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c +++ b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c @@ -271,11 +271,11 @@ drm_kunit_helper_connector_hdmi_init(struct kunit *test, * in turn disable/enable the connector. */ static void drm_test_check_broadcast_rgb_crtc_mode_changed(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *old_conn_state; struct drm_connector_state *new_conn_state; struct drm_crtc_state *crtc_state; struct drm_atomic_state *state; struct drm_display_mode *preferred; @@ -294,17 +294,16 @@ static void drm_test_check_broadcast_rgb_crtc_mode_changed(struct kunit *test) conn = &priv->connector; preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); new_conn_state = drm_atomic_get_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state); @@ -325,21 +324,24 @@ static void drm_test_check_broadcast_rgb_crtc_mode_changed(struct kunit *test) KUNIT_EXPECT_EQ(test, new_conn_state->hdmi.broadcast_rgb, DRM_HDMI_BROADCAST_RGB_FULL); crtc_state = drm_atomic_get_new_crtc_state(state, crtc); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state); KUNIT_EXPECT_TRUE(test, crtc_state->mode_changed); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if we set the RGB quantization property to the same value, * we don't trigger a mode change on the connector's CRTC and leave the * connector unaffected. */ static void drm_test_check_broadcast_rgb_crtc_mode_not_changed(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *old_conn_state; struct drm_connector_state *new_conn_state; struct drm_crtc_state *crtc_state; struct drm_atomic_state *state; struct drm_display_mode *preferred; @@ -358,17 +360,16 @@ static void drm_test_check_broadcast_rgb_crtc_mode_not_changed(struct kunit *tes conn = &priv->connector; preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); new_conn_state = drm_atomic_get_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state); @@ -391,21 +392,24 @@ static void drm_test_check_broadcast_rgb_crtc_mode_not_changed(struct kunit *tes new_conn_state->hdmi.broadcast_rgb); crtc_state = drm_atomic_get_new_crtc_state(state, crtc); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state); KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that for an HDMI connector, with an HDMI monitor, if the * Broadcast RGB property is set to auto with a mode that isn't the * VIC-1 mode, we will get a limited RGB Quantization Range. */ static void drm_test_check_broadcast_rgb_auto_cea_mode(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_atomic_state *state; struct drm_display_mode *preferred; struct drm_connector *conn; struct drm_device *drm; @@ -424,17 +428,16 @@ static void drm_test_check_broadcast_rgb_auto_cea_mode(struct kunit *test) preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); conn_state = drm_atomic_get_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state); @@ -447,21 +450,24 @@ static void drm_test_check_broadcast_rgb_auto_cea_mode(struct kunit *test) conn_state = drm_atomic_get_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state); KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_limited_range); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that for an HDMI connector, with an HDMI monitor, if the * Broadcast RGB property is set to auto with a VIC-1 mode, we will get * a full RGB Quantization Range. */ static void drm_test_check_broadcast_rgb_auto_cea_mode_vic_1(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_atomic_state *state; struct drm_display_mode *mode; struct drm_connector *conn; struct drm_device *drm; @@ -475,21 +481,20 @@ static void drm_test_check_broadcast_rgb_auto_cea_mode_vic_1(struct kunit *test) drm = &priv->drm; conn = &priv->connector; KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); mode = drm_kunit_display_mode_from_cea_vic(test, drm, 1); KUNIT_ASSERT_NOT_NULL(test, mode); crtc = priv->crtc; - ret = light_up_connector(test, drm, crtc, conn, mode, ctx); + ret = light_up_connector(test, drm, crtc, conn, mode, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); conn_state = drm_atomic_get_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state); @@ -502,21 +507,24 @@ static void drm_test_check_broadcast_rgb_auto_cea_mode_vic_1(struct kunit *test) conn_state = drm_atomic_get_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state); KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_limited_range); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that for an HDMI connector, with an HDMI monitor, if the * Broadcast RGB property is set to full with a mode that isn't the * VIC-1 mode, we will get a full RGB Quantization Range. */ static void drm_test_check_broadcast_rgb_full_cea_mode(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_atomic_state *state; struct drm_display_mode *preferred; struct drm_connector *conn; struct drm_device *drm; @@ -535,17 +543,16 @@ static void drm_test_check_broadcast_rgb_full_cea_mode(struct kunit *test) preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); conn_state = drm_atomic_get_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state); @@ -560,21 +567,24 @@ static void drm_test_check_broadcast_rgb_full_cea_mode(struct kunit *test) KUNIT_ASSERT_EQ(test, conn_state->hdmi.broadcast_rgb, DRM_HDMI_BROADCAST_RGB_FULL); KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_limited_range); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that for an HDMI connector, with an HDMI monitor, if the * Broadcast RGB property is set to full with a VIC-1 mode, we will get * a full RGB Quantization Range. */ static void drm_test_check_broadcast_rgb_full_cea_mode_vic_1(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_atomic_state *state; struct drm_display_mode *mode; struct drm_connector *conn; struct drm_device *drm; @@ -588,21 +598,20 @@ static void drm_test_check_broadcast_rgb_full_cea_mode_vic_1(struct kunit *test) drm = &priv->drm; conn = &priv->connector; KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); mode = drm_kunit_display_mode_from_cea_vic(test, drm, 1); KUNIT_ASSERT_NOT_NULL(test, mode); crtc = priv->crtc; - ret = light_up_connector(test, drm, crtc, conn, mode, ctx); + ret = light_up_connector(test, drm, crtc, conn, mode, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); conn_state = drm_atomic_get_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state); @@ -617,21 +626,24 @@ static void drm_test_check_broadcast_rgb_full_cea_mode_vic_1(struct kunit *test) KUNIT_ASSERT_EQ(test, conn_state->hdmi.broadcast_rgb, DRM_HDMI_BROADCAST_RGB_FULL); KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_limited_range); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that for an HDMI connector, with an HDMI monitor, if the * Broadcast RGB property is set to limited with a mode that isn't the * VIC-1 mode, we will get a limited RGB Quantization Range. */ static void drm_test_check_broadcast_rgb_limited_cea_mode(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_atomic_state *state; struct drm_display_mode *preferred; struct drm_connector *conn; struct drm_device *drm; @@ -650,17 +662,16 @@ static void drm_test_check_broadcast_rgb_limited_cea_mode(struct kunit *test) preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); conn_state = drm_atomic_get_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state); @@ -675,21 +686,24 @@ static void drm_test_check_broadcast_rgb_limited_cea_mode(struct kunit *test) KUNIT_ASSERT_EQ(test, conn_state->hdmi.broadcast_rgb, DRM_HDMI_BROADCAST_RGB_LIMITED); KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_limited_range); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that for an HDMI connector, with an HDMI monitor, if the * Broadcast RGB property is set to limited with a VIC-1 mode, we will * get a limited RGB Quantization Range. */ static void drm_test_check_broadcast_rgb_limited_cea_mode_vic_1(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_atomic_state *state; struct drm_display_mode *mode; struct drm_connector *conn; struct drm_device *drm; @@ -703,21 +717,20 @@ static void drm_test_check_broadcast_rgb_limited_cea_mode_vic_1(struct kunit *te drm = &priv->drm; conn = &priv->connector; KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); mode = drm_kunit_display_mode_from_cea_vic(test, drm, 1); KUNIT_ASSERT_NOT_NULL(test, mode); crtc = priv->crtc; - ret = light_up_connector(test, drm, crtc, conn, mode, ctx); + ret = light_up_connector(test, drm, crtc, conn, mode, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); conn_state = drm_atomic_get_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state); @@ -732,21 +745,24 @@ static void drm_test_check_broadcast_rgb_limited_cea_mode_vic_1(struct kunit *te KUNIT_ASSERT_EQ(test, conn_state->hdmi.broadcast_rgb, DRM_HDMI_BROADCAST_RGB_LIMITED); KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_limited_range); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if we change the maximum bpc property to a different value, * we trigger a mode change on the connector's CRTC, which will in turn * disable/enable the connector. */ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *old_conn_state; struct drm_connector_state *new_conn_state; struct drm_crtc_state *crtc_state; struct drm_atomic_state *state; struct drm_display_mode *preferred; @@ -769,17 +785,16 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test) KUNIT_ASSERT_GT(test, ret, 0); preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); new_conn_state = drm_atomic_get_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state); @@ -806,21 +821,24 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test) new_conn_state->hdmi.output_bpc); crtc_state = drm_atomic_get_new_crtc_state(state, crtc); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state); KUNIT_EXPECT_TRUE(test, crtc_state->mode_changed); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if we set the output bpc property to the same value, we * don't trigger a mode change on the connector's CRTC and leave the * connector unaffected. */ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *old_conn_state; struct drm_connector_state *new_conn_state; struct drm_crtc_state *crtc_state; struct drm_atomic_state *state; struct drm_display_mode *preferred; @@ -843,17 +861,16 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test) KUNIT_ASSERT_GT(test, ret, 0); preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); new_conn_state = drm_atomic_get_connector_state(state, conn); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state); @@ -878,20 +895,23 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test) new_conn_state->hdmi.output_bpc); crtc_state = drm_atomic_get_new_crtc_state(state, crtc); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state); KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if we have an HDMI connector but a !HDMI display, we always * output RGB with 8 bpc. */ static void drm_test_check_output_bpc_dvi(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_display_info *info; struct drm_display_mode *preferred; struct drm_connector *conn; struct drm_device *drm; @@ -917,31 +937,33 @@ static void drm_test_check_output_bpc_dvi(struct kunit *test) KUNIT_ASSERT_FALSE(test, info->is_hdmi); preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); conn_state = conn->state; KUNIT_ASSERT_NOT_NULL(test, conn_state); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that when doing a commit which would use RGB 8bpc, the TMDS * clock rate stored in the connector state is equal to the mode clock */ static void drm_test_check_tmds_char_rate_rgb_8bpc(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_display_mode *preferred; struct drm_connector *conn; struct drm_device *drm; struct drm_crtc *crtc; @@ -962,33 +984,35 @@ static void drm_test_check_tmds_char_rate_rgb_8bpc(struct kunit *test) preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); conn_state = conn->state; KUNIT_ASSERT_NOT_NULL(test, conn_state); KUNIT_ASSERT_EQ(test, conn_state->hdmi.output_bpc, 8); KUNIT_ASSERT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1000); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that when doing a commit which would use RGB 10bpc, the TMDS * clock rate stored in the connector state is equal to 1.25 times the * mode pixel clock */ static void drm_test_check_tmds_char_rate_rgb_10bpc(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_display_mode *preferred; struct drm_connector *conn; struct drm_device *drm; struct drm_crtc *crtc; @@ -1009,33 +1033,35 @@ static void drm_test_check_tmds_char_rate_rgb_10bpc(struct kunit *test) preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); conn_state = conn->state; KUNIT_ASSERT_NOT_NULL(test, conn_state); KUNIT_ASSERT_EQ(test, conn_state->hdmi.output_bpc, 10); KUNIT_ASSERT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1250); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that when doing a commit which would use RGB 12bpc, the TMDS * clock rate stored in the connector state is equal to 1.5 times the * mode pixel clock */ static void drm_test_check_tmds_char_rate_rgb_12bpc(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_display_mode *preferred; struct drm_connector *conn; struct drm_device *drm; struct drm_crtc *crtc; @@ -1056,22 +1082,24 @@ static void drm_test_check_tmds_char_rate_rgb_12bpc(struct kunit *test) preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); conn_state = conn->state; KUNIT_ASSERT_NOT_NULL(test, conn_state); KUNIT_ASSERT_EQ(test, conn_state->hdmi.output_bpc, 12); KUNIT_ASSERT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1500); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if we filter a rate through our hook, it's indeed rejected * by the whole atomic_check logic. @@ -1081,11 +1109,11 @@ static void drm_test_check_tmds_char_rate_rgb_12bpc(struct kunit *test) * again to see if it fails as it should. */ static void drm_test_check_hdmi_funcs_reject_rate(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_atomic_state *state; struct drm_display_mode *preferred; struct drm_crtc_state *crtc_state; struct drm_connector *conn; struct drm_device *drm; @@ -1102,29 +1130,31 @@ static void drm_test_check_hdmi_funcs_reject_rate(struct kunit *test) conn = &priv->connector; preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); /* You shouldn't be doing that at home. */ conn->hdmi.funcs = &reject_connector_hdmi_funcs; - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); crtc_state = drm_atomic_get_crtc_state(state, crtc); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state); crtc_state->connectors_changed = true; ret = drm_atomic_check_only(state); KUNIT_EXPECT_LT(test, ret, 0); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if: * - We have an HDMI connector supporting RGB only @@ -1137,11 +1167,11 @@ static void drm_test_check_hdmi_funcs_reject_rate(struct kunit *test) * will be equal to 1.25 times the mode pixel clock. */ static void drm_test_check_max_tmds_rate_bpc_fallback(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_display_info *info; struct drm_display_mode *preferred; unsigned long long rate; struct drm_connector *conn; @@ -1174,22 +1204,24 @@ static void drm_test_check_max_tmds_rate_bpc_fallback(struct kunit *test) KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000); rate = drm_hdmi_compute_mode_clock(preferred, 10, HDMI_COLORSPACE_RGB); KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_EXPECT_EQ(test, ret, 0); conn_state = conn->state; KUNIT_ASSERT_NOT_NULL(test, conn_state); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 10); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1250); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if: * - We have an HDMI connector supporting both RGB and YUV422 and up to @@ -1204,11 +1236,11 @@ static void drm_test_check_max_tmds_rate_bpc_fallback(struct kunit *test) * picking YUV422. */ static void drm_test_check_max_tmds_rate_format_fallback(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_display_info *info; struct drm_display_mode *preferred; unsigned long long rate; struct drm_connector *conn; @@ -1246,32 +1278,34 @@ static void drm_test_check_max_tmds_rate_format_fallback(struct kunit *test) KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000); rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422); KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_EXPECT_EQ(test, ret, 0); conn_state = conn->state; KUNIT_ASSERT_NOT_NULL(test, conn_state); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 10); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if a driver and screen supports RGB and YUV formats, and we * try to set the VIC 1 mode, we end up with 8bpc RGB even if we could * have had a higher bpc. */ static void drm_test_check_output_bpc_format_vic_1(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_display_info *info; struct drm_display_mode *mode; unsigned long long rate; struct drm_connector *conn; @@ -1308,32 +1342,34 @@ static void drm_test_check_output_bpc_format_vic_1(struct kunit *test) * Thus, we have to calculate the rate by hand. */ rate = mode->clock * 1500; KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); crtc = priv->crtc; - ret = light_up_connector(test, drm, crtc, conn, mode, ctx); + ret = light_up_connector(test, drm, crtc, conn, mode, &ctx); KUNIT_EXPECT_EQ(test, ret, 0); conn_state = conn->state; KUNIT_ASSERT_NOT_NULL(test, conn_state); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if a driver supports only RGB but the screen also supports * YUV formats, we only end up with an RGB format. */ static void drm_test_check_output_bpc_format_driver_rgb_only(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_display_info *info; struct drm_display_mode *preferred; unsigned long long rate; struct drm_connector *conn; @@ -1374,31 +1410,33 @@ static void drm_test_check_output_bpc_format_driver_rgb_only(struct kunit *test) KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000); rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422); KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_EXPECT_EQ(test, ret, 0); conn_state = conn->state; KUNIT_ASSERT_NOT_NULL(test, conn_state); KUNIT_EXPECT_LT(test, conn_state->hdmi.output_bpc, 12); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if a screen supports only RGB but the driver also supports * YUV formats, we only end up with an RGB format. */ static void drm_test_check_output_bpc_format_display_rgb_only(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_display_info *info; struct drm_display_mode *preferred; unsigned long long rate; struct drm_connector *conn; @@ -1441,32 +1479,34 @@ static void drm_test_check_output_bpc_format_display_rgb_only(struct kunit *test KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000); rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422); KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_EXPECT_EQ(test, ret, 0); conn_state = conn->state; KUNIT_ASSERT_NOT_NULL(test, conn_state); KUNIT_EXPECT_LT(test, conn_state->hdmi.output_bpc, 12); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if a display supports higher bpc but the driver only * supports 8 bpc, we only end up with 8 bpc even if we could have had a * higher bpc. */ static void drm_test_check_output_bpc_format_driver_8bpc_only(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_display_info *info; struct drm_display_mode *preferred; unsigned long long rate; struct drm_connector *conn; @@ -1499,32 +1539,34 @@ static void drm_test_check_output_bpc_format_driver_8bpc_only(struct kunit *test * clock to actually use 12bpc. */ rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB); KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_EXPECT_EQ(test, ret, 0); conn_state = conn->state; KUNIT_ASSERT_NOT_NULL(test, conn_state); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if a driver supports higher bpc but the display only * supports 8 bpc, we only end up with 8 bpc even if we could have had a * higher bpc. */ static void drm_test_check_output_bpc_format_display_8bpc_only(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_display_info *info; struct drm_display_mode *preferred; unsigned long long rate; struct drm_connector *conn; @@ -1559,28 +1601,30 @@ static void drm_test_check_output_bpc_format_display_8bpc_only(struct kunit *tes * clock to actually use 12bpc. */ rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB); KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_EXPECT_EQ(test, ret, 0); conn_state = conn->state; KUNIT_ASSERT_NOT_NULL(test, conn_state); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8); KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* Test that atomic check succeeds when disabling a connector. */ static void drm_test_check_disable_connector(struct kunit *test) { struct drm_atomic_helper_connector_hdmi_priv *priv; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_connector_state *conn_state; struct drm_crtc_state *crtc_state; struct drm_atomic_state *state; struct drm_display_mode *preferred; struct drm_connector *conn; @@ -1591,23 +1635,22 @@ static void drm_test_check_disable_connector(struct kunit *test) priv = drm_kunit_helper_connector_hdmi_init(test, BIT(HDMI_COLORSPACE_RGB), 8); KUNIT_ASSERT_NOT_NULL(test, priv); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); conn = &priv->connector; preferred = find_preferred_mode(conn); KUNIT_ASSERT_NOT_NULL(test, preferred); drm = &priv->drm; crtc = priv->crtc; - ret = light_up_connector(test, drm, crtc, conn, preferred, ctx); + ret = light_up_connector(test, drm, crtc, conn, preferred, &ctx); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); crtc_state = drm_atomic_get_crtc_state(state, crtc); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state); @@ -1621,10 +1664,13 @@ static void drm_test_check_disable_connector(struct kunit *test) ret = drm_atomic_set_crtc_for_connector(conn_state, NULL); KUNIT_EXPECT_EQ(test, ret, 0); ret = drm_atomic_check_only(state); KUNIT_ASSERT_EQ(test, ret, 0); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = { KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode), KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode_vic_1), diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.c b/drivers/gpu/drm/tests/drm_kunit_helpers.c index 3c0b7824c0be..a4eb68f0decc 100644 --- a/drivers/gpu/drm/tests/drm_kunit_helpers.c +++ b/drivers/gpu/drm/tests/drm_kunit_helpers.c @@ -78,51 +78,10 @@ __drm_kunit_helper_alloc_drm_device_with_driver(struct kunit *test, return drm; } EXPORT_SYMBOL_GPL(__drm_kunit_helper_alloc_drm_device_with_driver); -static void action_drm_release_context(void *ptr) -{ - struct drm_modeset_acquire_ctx *ctx = ptr; - - drm_modeset_drop_locks(ctx); - drm_modeset_acquire_fini(ctx); -} - -/** - * drm_kunit_helper_acquire_ctx_alloc - Allocates an acquire context - * @test: The test context object - * - * Allocates and initializes a modeset acquire context. - * - * The context is tied to the kunit test context, so we must not call - * drm_modeset_acquire_fini() on it, it will be done so automatically. - * - * Returns: - * An ERR_PTR on error, a pointer to the newly allocated context otherwise - */ -struct drm_modeset_acquire_ctx * -drm_kunit_helper_acquire_ctx_alloc(struct kunit *test) -{ - struct drm_modeset_acquire_ctx *ctx; - int ret; - - ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); - KUNIT_ASSERT_NOT_NULL(test, ctx); - - drm_modeset_acquire_init(ctx, 0); - - ret = kunit_add_action_or_reset(test, - action_drm_release_context, - ctx); - if (ret) - return ERR_PTR(ret); - - return ctx; -} -EXPORT_SYMBOL_GPL(drm_kunit_helper_acquire_ctx_alloc); - static void kunit_action_drm_atomic_state_put(void *ptr) { struct drm_atomic_state *state = ptr; drm_atomic_state_put(state); diff --git a/drivers/gpu/drm/vc4/tests/vc4_test_pv_muxing.c b/drivers/gpu/drm/vc4/tests/vc4_test_pv_muxing.c index 40a05869a50e..992e8f5c5c6e 100644 --- a/drivers/gpu/drm/vc4/tests/vc4_test_pv_muxing.c +++ b/drivers/gpu/drm/vc4/tests/vc4_test_pv_muxing.c @@ -722,11 +722,11 @@ static void drm_vc4_test_pv_muxing_invalid(struct kunit *test) } static int vc4_pv_muxing_test_init(struct kunit *test) { const struct pv_muxing_param *params = test->param_value; - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct pv_muxing_priv *priv; struct drm_device *drm; struct vc4_dev *vc4; priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL); @@ -735,17 +735,19 @@ static int vc4_pv_muxing_test_init(struct kunit *test) vc4 = params->mock_fn(test); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, vc4); priv->vc4 = vc4; - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); drm = &vc4->base; - priv->state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + priv->state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->state); + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); + return 0; } static struct kunit_case vc4_pv_muxing_tests[] = { KUNIT_CASE_PARAM(drm_vc4_test_pv_muxing, @@ -780,11 +782,11 @@ static struct kunit_suite vc5_pv_muxing_test_suite = { * and * https://lore.kernel.org/dri-devel/20200917121623.42023-1-maxime@cerno.tech/ */ static void drm_test_vc5_pv_muxing_bugs_subsequent_crtc_enable(struct kunit *test) { - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_atomic_state *state; struct vc4_crtc_state *new_vc4_crtc_state; struct vc4_hvs_state *new_hvs_state; unsigned int hdmi0_channel; unsigned int hdmi1_channel; @@ -793,15 +795,14 @@ static void drm_test_vc5_pv_muxing_bugs_subsequent_crtc_enable(struct kunit *tes int ret; vc4 = vc5_mock_device(test); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, vc4); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); drm = &vc4->base; - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); ret = vc4_mock_atomic_add_output(test, state, VC4_ENCODER_TYPE_HDMI0); KUNIT_ASSERT_EQ(test, ret, 0); @@ -820,11 +821,11 @@ static void drm_test_vc5_pv_muxing_bugs_subsequent_crtc_enable(struct kunit *tes KUNIT_ASSERT_TRUE(test, new_hvs_state->fifo_state[hdmi0_channel].in_use); ret = drm_atomic_helper_swap_state(state, false); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); ret = vc4_mock_atomic_add_output(test, state, VC4_ENCODER_TYPE_HDMI1); KUNIT_ASSERT_EQ(test, ret, 0); @@ -841,10 +842,13 @@ static void drm_test_vc5_pv_muxing_bugs_subsequent_crtc_enable(struct kunit *tes hdmi1_channel = new_vc4_crtc_state->assigned_channel; KUNIT_ASSERT_NE(test, hdmi1_channel, VC4_HVS_CHANNEL_DISABLED); KUNIT_ASSERT_TRUE(test, new_hvs_state->fifo_state[hdmi1_channel].in_use); KUNIT_EXPECT_NE(test, hdmi0_channel, hdmi1_channel); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * This test makes sure that we never change the FIFO of an active HVS * channel if we disable a FIFO with a lower index. @@ -852,11 +856,11 @@ static void drm_test_vc5_pv_muxing_bugs_subsequent_crtc_enable(struct kunit *tes * Doing so would result in a FIFO stall and would disrupt an output * supposed to be unaffected by the commit. */ static void drm_test_vc5_pv_muxing_bugs_stable_fifo(struct kunit *test) { - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_atomic_state *state; struct vc4_crtc_state *new_vc4_crtc_state; struct vc4_hvs_state *new_hvs_state; unsigned int old_hdmi0_channel; unsigned int old_hdmi1_channel; @@ -865,15 +869,14 @@ static void drm_test_vc5_pv_muxing_bugs_stable_fifo(struct kunit *test) int ret; vc4 = vc5_mock_device(test); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, vc4); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); drm = &vc4->base; - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); ret = vc4_mock_atomic_add_output(test, state, VC4_ENCODER_TYPE_HDMI0); KUNIT_ASSERT_EQ(test, ret, 0); @@ -903,11 +906,11 @@ static void drm_test_vc5_pv_muxing_bugs_stable_fifo(struct kunit *test) KUNIT_ASSERT_TRUE(test, new_hvs_state->fifo_state[old_hdmi1_channel].in_use); ret = drm_atomic_helper_swap_state(state, false); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); ret = vc4_mock_atomic_del_output(test, state, VC4_ENCODER_TYPE_HDMI0); KUNIT_ASSERT_EQ(test, ret, 0); @@ -927,10 +930,13 @@ static void drm_test_vc5_pv_muxing_bugs_stable_fifo(struct kunit *test) KUNIT_ASSERT_NE(test, hdmi1_channel, VC4_HVS_CHANNEL_DISABLED); KUNIT_ASSERT_TRUE(test, new_hvs_state->fifo_state[hdmi1_channel].in_use); KUNIT_EXPECT_EQ(test, old_hdmi1_channel, hdmi1_channel); } + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } /* * Test that if we affect a single output, only the CRTC state of that * output will be pulled in the global atomic state. @@ -947,25 +953,24 @@ static void drm_test_vc5_pv_muxing_bugs_stable_fifo(struct kunit *test) * inactive CRTC that never completes. */ static void drm_test_vc5_pv_muxing_bugs_subsequent_crtc_enable_too_many_crtc_state(struct kunit *test) { - struct drm_modeset_acquire_ctx *ctx; + struct drm_modeset_acquire_ctx ctx; struct drm_atomic_state *state; struct vc4_crtc_state *new_vc4_crtc_state; struct drm_device *drm; struct vc4_dev *vc4; int ret; vc4 = vc5_mock_device(test); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, vc4); - ctx = drm_kunit_helper_acquire_ctx_alloc(test); - KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + drm_modeset_acquire_init(&ctx, 0); drm = &vc4->base; - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); ret = vc4_mock_atomic_add_output(test, state, VC4_ENCODER_TYPE_HDMI0); KUNIT_ASSERT_EQ(test, ret, 0); @@ -973,11 +978,11 @@ drm_test_vc5_pv_muxing_bugs_subsequent_crtc_enable_too_many_crtc_state(struct ku KUNIT_ASSERT_EQ(test, ret, 0); ret = drm_atomic_helper_swap_state(state, false); KUNIT_ASSERT_EQ(test, ret, 0); - state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx); + state = drm_kunit_helper_atomic_state_alloc(test, drm, &ctx); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state); ret = vc4_mock_atomic_add_output(test, state, VC4_ENCODER_TYPE_HDMI1); KUNIT_ASSERT_EQ(test, ret, 0); @@ -985,10 +990,13 @@ drm_test_vc5_pv_muxing_bugs_subsequent_crtc_enable_too_many_crtc_state(struct ku KUNIT_ASSERT_EQ(test, ret, 0); new_vc4_crtc_state = get_vc4_crtc_state_for_encoder(test, state, VC4_ENCODER_TYPE_HDMI0); KUNIT_EXPECT_NULL(test, new_vc4_crtc_state); + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); } static struct kunit_case vc5_pv_muxing_bugs_tests[] = { KUNIT_CASE(drm_test_vc5_pv_muxing_bugs_subsequent_crtc_enable), KUNIT_CASE(drm_test_vc5_pv_muxing_bugs_subsequent_crtc_enable_too_many_crtc_state), diff --git a/include/drm/drm_kunit_helpers.h b/include/drm/drm_kunit_helpers.h index afdd46ef04f7..11d59ce0bac0 100644 --- a/include/drm/drm_kunit_helpers.h +++ b/include/drm/drm_kunit_helpers.h @@ -93,12 +93,10 @@ __drm_kunit_helper_alloc_drm_device(struct kunit *test, #define drm_kunit_helper_alloc_drm_device(_test, _dev, _type, _member, _feat) \ ((_type *)__drm_kunit_helper_alloc_drm_device(_test, _dev, \ sizeof(_type), \ offsetof(_type, _member), \ _feat)) -struct drm_modeset_acquire_ctx * -drm_kunit_helper_acquire_ctx_alloc(struct kunit *test); struct drm_atomic_state * drm_kunit_helper_atomic_state_alloc(struct kunit *test, struct drm_device *drm, struct drm_modeset_acquire_ctx *ctx); -- 2.48.1

1 month, 1 week

2
3
0 0

[PATCH] Documentation: kunit: improve example on testing static functions

by Rae Moar

The documentation on testing static functions using the KUnit macros VISIBLE_IF_KUNIT and EXPORT_SYMBOL_IF_KUNIT is lacking clarity and missing key steps in the example. This has caused bugs and confusion among developers. Improve wording of description and add missing steps to the example. This entails adding the "#include <kunit/visibility.h>" line and the "MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING);" line. Both of which were missing from the original example and key to exposing static functions. Signed-off-by: Rae Moar <rmoar(a)google.com> --- Documentation/dev-tools/kunit/usage.rst | 38 +++++++++++++++++++------ 1 file changed, 30 insertions(+), 8 deletions(-) diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index 22955d56b379..038f480074fd 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -670,28 +670,50 @@ with ``kunit_remove_action``. Testing Static Functions ------------------------ -If we do not want to expose functions or variables for testing, one option is to -conditionally export the used symbol. For example: +If you want to test static functions without exposing those functions outside of +testing, one option is conditionally export the symbol. When KUnit is enabled, +the symbol is exposed but remains static otherwise. To use this method, follow +the template below. .. code-block:: c - /* In my_file.c */ + /* In the file containing functions to test "my_file.c" */ - VISIBLE_IF_KUNIT int do_interesting_thing(); + #include <kunit/visibility.h> + #include <my_file.h> + ... + VISIBLE_IF_KUNIT int do_interesting_thing() + { + ... + } EXPORT_SYMBOL_IF_KUNIT(do_interesting_thing); - /* In my_file.h */ + /* In the header file "my_file.h" */ #if IS_ENABLED(CONFIG_KUNIT) int do_interesting_thing(void); #endif -Alternatively, you could conditionally ``#include`` the test file at the end of -your .c file. For example: + /* In the KUnit test file "my_file_test.c" */ + + #include <kunit/visibility.h> + #include <my_file.h> + ... + MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING); + ... + // Use do_interesting_thing() in tests + +For a full example, see this `patch <https://lore.kernel.org/all/20221207014024.340230-3-rmoar@google.com/>`_ +where a test is modified to conditionally expose static functions for testing +using the macros above. + +As an **alternative** to the method above, you could conditionally ``#include`` +the test file at the end of your .c file. This is not recommended but works +if needed. For example: .. code-block:: c - /* In my_file.c */ + /* In "my_file.c" */ static int do_interesting_thing(); base-commit: c2493384e8110d5a4792fff4b9d46e47b78ea10a -- 2.49.0.1101.gccaa498523-goog

1 month, 1 week

3
2
0 0

[PATCH] kunit: tool: add test counts to JSON output

by Rae Moar

Add the test counts to the JSON output from kunit.py. For example: ... "git_branch": "kselftest", "misc": { "tests": 2, "passed": 1. "failed": 1, "crashed": 0, "skipped": 0, "errors": 0, } ... To output the JSON using the following command: ./tools/testing/kunit/kunit.py run example --json This has been requested by KUnit users. The counts are in a "misc" field because the JSON output needs to be compliant with the KCIDB submission guide. There are no counts fields but there is a "misc" field in the guide. Signed-off-by: Rae Moar <rmoar(a)google.com> --- tools/testing/kunit/kunit_json.py | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/tools/testing/kunit/kunit_json.py b/tools/testing/kunit/kunit_json.py index 10ff65689dd8..80fa4e354a17 100644 --- a/tools/testing/kunit/kunit_json.py +++ b/tools/testing/kunit/kunit_json.py @@ -39,10 +39,20 @@ def _get_group_json(test: Test, common_fields: JsonObj) -> JsonObj: status = _status_map.get(subtest.status, "FAIL") test_cases.append({"name": subtest.name, "status": status}) + test_counts = test.counts + counts_json = { + "tests": test_counts.total(), + "passed": test_counts.passed, + "failed": test_counts.failed, + "crashed": test_counts.crashed, + "skipped": test_counts.skipped, + "errors": test_counts.errors, + } test_group = { "name": test.name, "sub_groups": sub_groups, "test_cases": test_cases, + "misc": counts_json } test_group.update(common_fields) return test_group base-commit: c2493384e8110d5a4792fff4b9d46e47b78ea10a -- 2.49.0.1101.gccaa498523-goog

1 month, 1 week

3
2
0 0

[PATCH][next] selftests/futex: Fix spelling mistake "unitiliazed" -> "uninitialized"

by Colin Ian King

There is a spelling mistake in a fail error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/futex/functional/futex_numa_mpol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/futex/functional/futex_numa_mpol.c b/tools/testing/selftests/futex/functional/futex_numa_mpol.c index dd70532f293e..8864c610f165 100644 --- a/tools/testing/selftests/futex/functional/futex_numa_mpol.c +++ b/tools/testing/selftests/futex/functional/futex_numa_mpol.c @@ -181,7 +181,7 @@ int main(int argc, char *argv[]) test_futex(futex_ptr, 0); if (futex_numa->numa == FUTEX_NO_NODE) { - fail("NUMA node is left unitiliazed\n"); + fail("NUMA node is left uninitialized\n"); return 1; } -- 2.49.0

1 month, 1 week

2
1
0 0

[PATCH] selftests: drv-net: Fix "envirnoments" to "environments"

by Sumanth Gavini

Fix misspelling reported by codespell Signed-off-by: Sumanth Gavini <sumanth.gavini(a)yahoo.com> --- tools/testing/selftests/drivers/net/lib/py/env.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py index ad5ff645183a..3bccddf8cbc5 100644 --- a/tools/testing/selftests/drivers/net/lib/py/env.py +++ b/tools/testing/selftests/drivers/net/lib/py/env.py @@ -12,7 +12,7 @@ from .remote import Remote class NetDrvEnvBase: """ - Base class for a NIC / host envirnoments + Base class for a NIC / host environments Attributes: test_dir: Path to the source directory of the test -- 2.43.0

1 month, 1 week

3
2
0 0

[PATCH v12 0/5] KVM: selftests: Add LoongArch support

by Bibo Mao

This patchset adds KVM selftests for LoongArch system, currently only some common test cases are supported and pass to run. These test cases are listed as following: coalesced_io_test demand_paging_test dirty_log_perf_test dirty_log_test guest_print_test hardware_disable_test kvm_binary_stats_test kvm_create_max_vcpus kvm_page_table_test memslot_modification_stress_test memslot_perf_test set_memory_region_test --- Changes in v12: 1. Replace vcpu_set_reg() with __vcpu_set_reg() in loongarch_set_csr() 2. Remove duplicated test case including in Makefile.kvm 3. Fix one issue reported by checkpatch Changes in v11: 1. Fix a typo issue in notes of patch 2, it is kvm_util_arch.h rather than kvm_util_base.h Changes in v10: 1. Add PS_64K and remove PS_8K in file include/loongarch/processor.h 2. Fix a typo issue in file lib/loongarch/processor.c 3. Update file MAINTAINERS about LoongArch KVM selftests Changes in v9: 1. Add vm mode VM_MODE_P47V47_16K, LoongArch VM uses this mode by default, rather than VM_MODE_P36V47_16K. 2. Refresh some spelling issues in changelog. Changes in v8: 1. Porting patch based on the latest version. 2. For macro PC_OFFSET_EXREGS, offsetof() method is used for C header file, still hardcoded definition for assemble language. Changes in v7: 1. Refine code to add LoongArch support in test case set_memory_region_test. Changes in v6: 1. Refresh the patch based on latest kernel 6.8-rc1, add LoongArch support about testcase set_memory_region_test. 2. Add hardware_disable_test test case. 3. Drop modification about macro DEFAULT_GUEST_TEST_MEM, it is problem of LoongArch binutils, this issue is raised to LoongArch binutils owners. Changes in v5: 1. In LoongArch kvm self tests, the DEFAULT_GUEST_TEST_MEM could be 0x130000000, it is different from the default value in memstress.h. So we Move the definition of DEFAULT_GUEST_TEST_MEM into LoongArch ucall.h, and add 'ifndef' condition for DEFAULT_GUEST_TEST_MEM in memstress.h. Changes in v4: 1. Remove the based-on flag, as the LoongArch KVM patch series have been accepted by Linux kernel, so this can be applied directly in kernel. Changes in v3: 1. Improve implementation of LoongArch VM page walk. 2. Add exception handler for LoongArch. 3. Add dirty_log_test, dirty_log_perf_test, guest_print_test test cases for LoongArch. 4. Add __ASSEMBLER__ macro to distinguish asm file and c file. 5. Move ucall_arch_do_ucall to the header file and make it as static inline to avoid function calls. 6. Change the DEFAULT_GUEST_TEST_MEM base addr for LoongArch. Changes in v2: 1. We should use ".balign 4096" to align the assemble code with 4K in exception.S instead of "align 12". 2. LoongArch only supports 3 or 4 levels page tables, so we remove the hanlders for 2-levels page table. 3. Remove the DEFAULT_LOONGARCH_GUEST_STACK_VADDR_MIN and use the common DEFAULT_GUEST_STACK_VADDR_MIN to allocate stack memory in guest. 4. Reorganize the test cases supported by LoongArch. 5. Fix some code comments. 6. Add kvm_binary_stats_test test case into LoongArch KVM selftests. --- Bibo Mao (5): KVM: selftests: Add VM_MODE_P47V47_16K VM mode KVM: selftests: Add KVM selftests header files for LoongArch KVM: selftests: Add core KVM selftests support for LoongArch KVM: selftests: Add ucall test support for LoongArch KVM: selftests: Add supported test cases for LoongArch MAINTAINERS | 2 + tools/testing/selftests/kvm/Makefile | 2 +- tools/testing/selftests/kvm/Makefile.kvm | 17 + .../testing/selftests/kvm/include/kvm_util.h | 6 + .../kvm/include/loongarch/kvm_util_arch.h | 7 + .../kvm/include/loongarch/processor.h | 141 +++++++ .../selftests/kvm/include/loongarch/ucall.h | 20 + tools/testing/selftests/kvm/lib/kvm_util.c | 3 + .../selftests/kvm/lib/loongarch/exception.S | 59 +++ .../selftests/kvm/lib/loongarch/processor.c | 347 ++++++++++++++++++ .../selftests/kvm/lib/loongarch/ucall.c | 38 ++ .../selftests/kvm/set_memory_region_test.c | 2 +- 12 files changed, 642 insertions(+), 2 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/loongarch/kvm_util_arch.h create mode 100644 tools/testing/selftests/kvm/include/loongarch/processor.h create mode 100644 tools/testing/selftests/kvm/include/loongarch/ucall.h create mode 100644 tools/testing/selftests/kvm/lib/loongarch/exception.S create mode 100644 tools/testing/selftests/kvm/lib/loongarch/processor.c create mode 100644 tools/testing/selftests/kvm/lib/loongarch/ucall.c base-commit: a5806cd506af5a7c19bcd596e4708b5c464bfd21 -- 2.39.3

1 month, 1 week

1
5
0 0

[PATCH net-next v1 0/9] Devmem TCP minor cleanups and ksft improvements

by Mina Almasry

Minor cleanups to the devmem tcp code, and not-so-minor improvements to the ksft. For the cleanups: - Address comment from Paolo post-merge. - Fix whitespace. - Add improvement dropped from Taehee's fix patch. For the ksft: - Add support for ipv4 environment. - Add support for drivers that are limited to 5-tuple flow steering. - Improve test by sending 1K data instead of just "hello\nworld" Cc: sdf(a)fomichev.me Cc: ap420073(a)gmail.com Cc: praan(a)google.com Cc: shivajikant(a)google.com Mina Almasry (9): net: devmem: move list_add to net_devmem_bind_dmabuf. page_pool: fix ugly page_pool formatting net: devmem: preserve sockc_err net: devmem: ksft: remove ksft_disruptive net: devmem: ksft: add ipv4 support net: devmem: ksft: add exit_wait to make rx test pass net: devmem: ksft: add 5 tuple FS support net: devmem: ksft: upgrade rx test to send 1K data net: devmem: ncdevmem: remove unused variable net/core/devmem.c | 5 +- net/core/devmem.h | 5 +- net/core/netdev-genl.c | 8 +-- net/core/page_pool.c | 4 +- net/ipv4/tcp.c | 24 ++++----- .../selftests/drivers/net/hw/devmem.py | 52 +++++++++++++------ .../selftests/drivers/net/hw/ncdevmem.c | 1 - 7 files changed, 59 insertions(+), 40 deletions(-) base-commit: b8fa067c4a76e9a28f2003a50ff9b60f00b11168 -- 2.49.0.1101.gccaa498523-goog

1 month, 1 week

4
25
0 0

[PATCH] selftests/futex: Fix usage() message to clarify timeout value unit

by Jonathan Velez

futex_wait_timeout: Fix usage() message to clarify timeout value unit Signed-off-by: Jonathan Velez <jonvelez12345(a)gmail.com> --- tools/testing/selftests/futex/functional/futex_wait_timeout.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/futex/functional/futex_wait_timeout.c b/tools/testing/selftests/futex/functional/futex_wait_timeout.c index d183f878360b..737475df9242 100644 --- a/tools/testing/selftests/futex/functional/futex_wait_timeout.c +++ b/tools/testing/selftests/futex/functional/futex_wait_timeout.c @@ -31,7 +31,7 @@ void usage(char *prog) printf("Usage: %s\n", prog); printf(" -c Use color\n"); printf(" -h Display this help message\n"); - printf(" -t N Timeout in nanoseconds (default: 100,000)\n"); + printf(" -t N Set timeout duration in nanoseconds (default: 100,000 ns = 100 us)\n"); printf(" -v L Verbosity level: %d=QUIET %d=CRITICAL %d=INFO\n", VQUIET, VCRITICAL, VINFO); } -- 2.43.0

1 month, 1 week

2
2
0 0

Last week to submit your sessions to the Automated Testing Summit!

by Gustavo Padovan

Hello, It is the last week to submit your proposal! The Automated Testing Summit (ATS) 2025 will be held as a co-located event at the Open Source Summit North America! https://events.linuxfoundation.org/open-source-summit-north-america/feature… 📅 Date: June 26, 2025 📍 Location: Denver, CO, USA Hosted by KernelCI, ATS is a technical summit focused on the challenges of testing and quality assurance in the Linux ecosystem — especially in upstream kernel development, embedded systems, cloud environments, and CI integration. This is a great opportunity to share your work on: * Kernel and userspace test frameworks * Lab infrastructure and automation * CI/CD pipelines for Linux * Fuzzing, performance testing, and debugging tools * Sharing and standardizing test results across systems Whether you’re working on kernel testing, running tests on hardware labs, developing QA tools, or building infrastructure that scales across projects, ATS is the place to collaborate and move the ecosystem forward. Submit your talk by May 18, 2025: 👉 Call for Proposals (CFP): https://sessionize.com/atsna2025 We hope to see you in Denver! — The KernelCI Team -- Gustavo Padovan Collabora Ltd.

1 month, 1 week

1
1
0 0

[PATCH v11 0/5] KVM: selftests: Add LoongArch support

by Bibo Mao

This patchset adds KVM selftests for LoongArch system, currently only some common test cases are supported and pass to run. These test cases are listed as following: coalesced_io_test demand_paging_test dirty_log_perf_test dirty_log_test guest_print_test hardware_disable_test kvm_binary_stats_test kvm_create_max_vcpus kvm_page_table_test memslot_modification_stress_test memslot_perf_test set_memory_region_test --- Changes in v11: 1. Fix a typo issue in notes of patch 2, it is kvm_util_arch.h rather than kvm_util_base.h Changes in v10: 1. Add PS_64K and remove PS_8K in file include/loongarch/processor.h 2. Fix a typo issue in file lib/loongarch/processor.c 3. Update file MAINTAINERS about LoongArch KVM selftests Changes in v9: 1. Add vm mode VM_MODE_P47V47_16K, LoongArch VM uses this mode by default, rather than VM_MODE_P36V47_16K. 2. Refresh some spelling issues in changelog. Changes in v8: 1. Porting patch based on the latest version. 2. For macro PC_OFFSET_EXREGS, offsetof() method is used for C header file, still hardcoded definition for assemble language. Changes in v7: 1. Refine code to add LoongArch support in test case set_memory_region_test. Changes in v6: 1. Refresh the patch based on latest kernel 6.8-rc1, add LoongArch support about testcase set_memory_region_test. 2. Add hardware_disable_test test case. 3. Drop modification about macro DEFAULT_GUEST_TEST_MEM, it is problem of LoongArch binutils, this issue is raised to LoongArch binutils owners. Changes in v5: 1. In LoongArch kvm self tests, the DEFAULT_GUEST_TEST_MEM could be 0x130000000, it is different from the default value in memstress.h. So we Move the definition of DEFAULT_GUEST_TEST_MEM into LoongArch ucall.h, and add 'ifndef' condition for DEFAULT_GUEST_TEST_MEM in memstress.h. Changes in v4: 1. Remove the based-on flag, as the LoongArch KVM patch series have been accepted by Linux kernel, so this can be applied directly in kernel. Changes in v3: 1. Improve implementation of LoongArch VM page walk. 2. Add exception handler for LoongArch. 3. Add dirty_log_test, dirty_log_perf_test, guest_print_test test cases for LoongArch. 4. Add __ASSEMBLER__ macro to distinguish asm file and c file. 5. Move ucall_arch_do_ucall to the header file and make it as static inline to avoid function calls. 6. Change the DEFAULT_GUEST_TEST_MEM base addr for LoongArch. Changes in v2: 1. We should use ".balign 4096" to align the assemble code with 4K in exception.S instead of "align 12". 2. LoongArch only supports 3 or 4 levels page tables, so we remove the hanlders for 2-levels page table. 3. Remove the DEFAULT_LOONGARCH_GUEST_STACK_VADDR_MIN and use the common DEFAULT_GUEST_STACK_VADDR_MIN to allocate stack memory in guest. 4. Reorganize the test cases supported by LoongArch. 5. Fix some code comments. 6. Add kvm_binary_stats_test test case into LoongArch KVM selftests. --- Bibo Mao (5): KVM: selftests: Add VM_MODE_P47V47_16K VM mode KVM: selftests: Add KVM selftests header files for LoongArch KVM: selftests: Add core KVM selftests support for LoongArch KVM: selftests: Add ucall test support for LoongArch KVM: selftests: Add test cases for LoongArch MAINTAINERS | 2 + tools/testing/selftests/kvm/Makefile | 2 +- tools/testing/selftests/kvm/Makefile.kvm | 18 + .../testing/selftests/kvm/include/kvm_util.h | 6 + .../kvm/include/loongarch/kvm_util_arch.h | 7 + .../kvm/include/loongarch/processor.h | 141 ++++++++ .../selftests/kvm/include/loongarch/ucall.h | 20 + tools/testing/selftests/kvm/lib/kvm_util.c | 3 + .../selftests/kvm/lib/loongarch/exception.S | 59 +++ .../selftests/kvm/lib/loongarch/processor.c | 342 ++++++++++++++++++ .../selftests/kvm/lib/loongarch/ucall.c | 38 ++ .../selftests/kvm/set_memory_region_test.c | 2 +- 12 files changed, 638 insertions(+), 2 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/loongarch/kvm_util_arch.h create mode 100644 tools/testing/selftests/kvm/include/loongarch/processor.h create mode 100644 tools/testing/selftests/kvm/include/loongarch/ucall.h create mode 100644 tools/testing/selftests/kvm/lib/loongarch/exception.S create mode 100644 tools/testing/selftests/kvm/lib/loongarch/processor.c create mode 100644 tools/testing/selftests/kvm/lib/loongarch/ucall.c base-commit: 5bc1018675ec28a8a60d83b378d8c3991faa5a27 -- 2.39.3

1 month, 1 week

2
10
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror