- Linux-kselftest-mirror - lists.linaro.org

[PATCH RFC bpf-next 0/9] allow HID-BPF to do device IOs

by Benjamin Tissoires

[Putting this as a RFC because I'm pretty sure I'm not doing the things correctly at the BPF level.] [Also using bpf-next as the base tree as there will be conflicting changes otherwise] Ideally I'd like to have something similar to bpf_timers, but not in soft IRQ context. So I'm emulating this with a sleepable bpf_tail_call() (see "HID: bpf: allow to defer work in a delayed workqueue"). Basically, I need to be able to defer a HID-BPF program for the following reasons (from the aforementioned patch): 1. defer an event: Sometimes we receive an out of proximity event, but the device can not be trusted enough, and we need to ensure that we won't receive another one in the following n milliseconds. So we need to wait those n milliseconds, and eventually re-inject that event in the stack. 2. inject new events in reaction to one given event: We might want to transform one given event into several. This is the case for macro keys where a single key press is supposed to send a sequence of key presses. But this could also be used to patch a faulty behavior, if a device forgets to send a release event. 3. communicate with the device in reaction to one event: We might want to communicate back to the device after a given event. For example a device might send us an event saying that it came back from sleeping state and needs to be re-initialized. Currently we can achieve that by keeping a userspace program around, raise a bpf event, and let that userspace program inject the events and commands. However, we are just keeping that program alive as a daemon for just scheduling commands. There is no logic in it, so it doesn't really justify an actual userspace wakeup. So a kernel workqueue seems simpler to handle. Besides the "this is insane to reimplement the wheel", the other part I'm not sure is whether we can say that BPF maps of type prog_array and of type queue/stack can be used in sleepable context. I don't see any warning when running the test programs, but that's probably not a guarantee I'm doing the things properly :) Cheers, Benjamin Signed-off-by: Benjamin Tissoires <bentiss(a)kernel.org> --- Benjamin Tissoires (9): bpf: allow more maps in sleepable bpf programs HID: bpf/dispatch: regroup kfuncs definitions HID: bpf: export hid_hw_output_report as a BPF kfunc selftests/hid: Add test for hid_bpf_hw_output_report HID: bpf: allow to inject HID event from BPF selftests/hid: add tests for hid_bpf_input_report HID: bpf: allow to defer work in a delayed workqueue selftests/hid: add test for hid_bpf_schedule_delayed_work selftests/hid: add another set of delayed work tests Documentation/hid/hid-bpf.rst | 26 +- drivers/hid/bpf/entrypoints/entrypoints.bpf.c | 8 + drivers/hid/bpf/entrypoints/entrypoints.lskel.h | 236 +++++++++------ drivers/hid/bpf/hid_bpf_dispatch.c | 315 ++++++++++++++++----- drivers/hid/bpf/hid_bpf_jmp_table.c | 34 ++- drivers/hid/hid-core.c | 2 + include/linux/hid_bpf.h | 10 + kernel/bpf/verifier.c | 3 + tools/testing/selftests/hid/hid_bpf.c | 286 ++++++++++++++++++- tools/testing/selftests/hid/progs/hid.c | 205 ++++++++++++++ .../testing/selftests/hid/progs/hid_bpf_helpers.h | 8 + 11 files changed, 962 insertions(+), 171 deletions(-) --- base-commit: 4f7a05917237b006ceae760507b3d15305769ade change-id: 20240205-hid-bpf-sleepable-c01260fd91c4 Best regards, -- Benjamin Tissoires <bentiss(a)kernel.org>

1 year, 5 months

5
23
0 0

[PATCH v12 00/20] KVM: xen: update shared_info and vcpu_info handling

by Paul Durrant

From: Paul Durrant <pdurrant(a)amazon.com> This series has one small fix to what was in v11 [1]: * KVM: xen: re-initialize shared_info if guest (32/64-bit) mode is set The v11 patch failed to set the return code of the ioctl if the mode was not actually changed, leading to a spurious failure. This version of the series also contains a new bug-fix to the pfncache code from David Woodhouse. [1] https://lore.kernel.org/kvm/20231219161109.1318-1-paul@xen.org/ David Woodhouse (1): KVM: pfncache: rework __kvm_gpc_refresh() to fix locking issues Paul Durrant (19): KVM: pfncache: Add a map helper function KVM: pfncache: remove unnecessary exports KVM: xen: mark guest pages dirty with the pfncache lock held KVM: pfncache: add a mark-dirty helper KVM: pfncache: remove KVM_GUEST_USES_PFN usage KVM: pfncache: stop open-coding offset_in_page() KVM: pfncache: include page offset in uhva and use it consistently KVM: pfncache: allow a cache to be activated with a fixed (userspace) HVA KVM: xen: separate initialization of shared_info cache and content KVM: xen: re-initialize shared_info if guest (32/64-bit) mode is set KVM: xen: allow shared_info to be mapped by fixed HVA KVM: xen: allow vcpu_info to be mapped by fixed HVA KVM: selftests / xen: map shared_info using HVA rather than GFN KVM: selftests / xen: re-map vcpu_info using HVA rather than GPA KVM: xen: advertize the KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA capability KVM: xen: split up kvm_xen_set_evtchn_fast() KVM: xen: don't block on pfncache locks in kvm_xen_set_evtchn_fast() KVM: pfncache: check the need for invalidation under read lock first KVM: xen: allow vcpu_info content to be 'safely' copied Documentation/virt/kvm/api.rst | 53 ++- arch/x86/kvm/x86.c | 7 +- arch/x86/kvm/xen.c | 356 +++++++++++------- include/linux/kvm_host.h | 40 +- include/linux/kvm_types.h | 8 - include/uapi/linux/kvm.h | 9 +- .../selftests/kvm/x86_64/xen_shinfo_test.c | 59 ++- virt/kvm/pfncache.c | 340 +++++++++-------- 8 files changed, 535 insertions(+), 337 deletions(-) base-commit: 1c6d984f523f67ecfad1083bb04c55d91977bb15 -- 2.39.2

1 year, 5 months

4
57
0 0

[RFC PATCH net-next v5 00/14] Device Memory TCP

by Mina Almasry

Major changes in RFC v5: ------------------------ 1. Rebased on top of 'Abstract page from net stack' series and used the new netmem type to refer to LSB set pointers instead of re-using struct page. 2. Downgraded this series back to RFC and called it RFC v5. This is because this series is now dependent on 'Abstract page from net stack'[1] and the queue API. Both are removed from the series to pre-requisite work. 3. Reworked the page_pool devmem support to use netmem and for some more unified handling. 4. Reworked the reference counting of net_iov (renamed from page_pool_iov) to use pp_ref_count for refcounting. The full changes including the dependent series and GVE page pool support is here: https://github.com/mina/linux/commits/tcpdevmem-rfcv5/ [1] https://patchwork.kernel.org/project/netdevbpf/list/?series=810774 Major changes in v1: -------------------- 1. Implemented MVP queue API ndos to remove the userspace-visible driver reset. 2. Fixed issues in the napi_pp_put_page() devmem frag unref path. 3. Removed RFC tag. Many smaller addressed comments across all the patches (patches have individual change log). Full tree including the rest of the GVE driver changes: https://github.com/mina/linux/commits/tcpdevmem-v1 Changes in RFC v3: ------------------ 1. Pulled in the memory-provider dependency from Jakub's RFC[1] to make the series reviewable and mergable. 2. Implemented multi-rx-queue binding which was a todo in v2. 3. Fix to cmsg handling. The sticking point in RFC v2[2] was the device reset required to refill the device rx-queues after the dmabuf bind/unbind. The solution suggested as I understand is a subset of the per-queue management ops Jakub suggested or similar: https://lore.kernel.org/netdev/20230815171638.4c057dcd@kernel.org/ This is not addressed in this revision, because: 1. This point was discussed at netconf & netdev and there is openness to using the current approach of requiring a device reset. 2. Implementing individual queue resetting seems to be difficult for my test bed with GVE. My prototype to test this ran into issues with the rx-queues not coming back up properly if reset individually. At the moment I'm unsure if it's a mistake in the POC or a genuine issue in the virtualization stack behind GVE, which currently doesn't test individual rx-queue restart. 3. Our usecases are not bothered by requiring a device reset to refill the buffer queues, and we'd like to support NICs that run into this limitation with resetting individual queues. My thought is that drivers that have trouble with per-queue configs can use the support in this series, while drivers that support new netdev ops to reset individual queues can automatically reset the queue as part of the dma-buf bind/unbind. The same approach with device resets is presented again for consideration with other sticking points addressed. This proposal includes the rx devmem path only proposed for merge. For a snapshot of my entire tree which includes the GVE POC page pool support & device memory support: https://github.com/torvalds/linux/compare/master...mina:linux:tcpdevmem-v3 [1] https://lore.kernel.org/netdev/f8270765-a27b-6ccf-33ea-cda097168d79@redhat.… [2] https://lore.kernel.org/netdev/CAHS8izOVJGJH5WF68OsRWFKJid1_huzzUK+hpKbLcL4… Changes in RFC v2: ------------------ The sticking point in RFC v1[1] was the dma-buf pages approach we used to deliver the device memory to the TCP stack. RFC v2 is a proof-of-concept that attempts to resolve this by implementing scatterlist support in the networking stack, such that we can import the dma-buf scatterlist directly. This is the approach proposed at a high level here[2]. Detailed changes: 1. Replaced dma-buf pages approach with importing scatterlist into the page pool. 2. Replace the dma-buf pages centric API with a netlink API. 3. Removed the TX path implementation - there is no issue with implementing the TX path with scatterlist approach, but leaving out the TX path makes it easier to review. 4. Functionality is tested with this proposal, but I have not conducted perf testing yet. I'm not sure there are regressions, but I removed perf claims from the cover letter until they can be re-confirmed. 5. Added Signed-off-by: contributors to the implementation. 6. Fixed some bugs with the RX path since RFC v1. Any feedback welcome, but specifically the biggest pending questions needing feedback IMO are: 1. Feedback on the scatterlist-based approach in general. 2. Netlink API (Patch 1 & 2). 3. Approach to handle all the drivers that expect to receive pages from the page pool (Patch 6). [1] https://lore.kernel.org/netdev/dfe4bae7-13a0-3c5d-d671-f61b375cb0b4@gmail.c… [2] https://lore.kernel.org/netdev/CAHS8izPm6XRS54LdCDZVd0C75tA1zHSu6jLVO8nzTLX… ---------------------- * TL;DR: Device memory TCP (devmem TCP) is a proposal for transferring data to and/or from device memory efficiently, without bouncing the data to a host memory buffer. * Problem: A large amount of data transfers have device memory as the source and/or destination. Accelerators drastically increased the volume of such transfers. Some examples include: - ML accelerators transferring large amounts of training data from storage into GPU/TPU memory. In some cases ML training setup time can be as long as 50% of TPU compute time, improving data transfer throughput & efficiency can help improving GPU/TPU utilization. - Distributed training, where ML accelerators, such as GPUs on different hosts, exchange data among them. - Distributed raw block storage applications transfer large amounts of data with remote SSDs, much of this data does not require host processing. Today, the majority of the Device-to-Device data transfers the network are implemented as the following low level operations: Device-to-Host copy, Host-to-Host network transfer, and Host-to-Device copy. The implementation is suboptimal, especially for bulk data transfers, and can put significant strains on system resources, such as host memory bandwidth, PCIe bandwidth, etc. One important reason behind the current state is the kernel’s lack of semantics to express device to network transfers. * Proposal: In this patch series we attempt to optimize this use case by implementing socket APIs that enable the user to: 1. send device memory across the network directly, and 2. receive incoming network packets directly into device memory. Packet _payloads_ go directly from the NIC to device memory for receive and from device memory to NIC for transmit. Packet _headers_ go to/from host memory and are processed by the TCP/IP stack normally. The NIC _must_ support header split to achieve this. Advantages: - Alleviate host memory bandwidth pressure, compared to existing network-transfer + device-copy semantics. - Alleviate PCIe BW pressure, by limiting data transfer to the lowest level of the PCIe tree, compared to traditional path which sends data through the root complex. * Patch overview: ** Part 1: netlink API Gives user ability to bind dma-buf to an RX queue. ** Part 2: scatterlist support Currently the standard for device memory sharing is DMABUF, which doesn't generate struct pages. On the other hand, networking stack (skbs, drivers, and page pool) operate on pages. We have 2 options: 1. Generate struct pages for dmabuf device memory, or, 2. Modify the networking stack to process scatterlist. ** part 3: page pool support We piggy back on page pool memory providers proposal: https://github.com/kuba-moo/linux/tree/pp-providers It allows the page pool to define a memory provider that provides the page allocation and freeing. It helps abstract most of the device memory TCP changes from the driver. ** part 4: support for unreadable skb frags Page pool iovs are not accessible by the host; we implement changes throughput the networking stack to correctly handle skbs with unreadable frags. ** Part 5: recvmsg() APIs We define user APIs for the user to send and receive device memory. Not included with this series is the GVE devmem TCP support, just to simplify the review. Code available here if desired: https://github.com/mina/linux/tree/tcpdevmem This series is built on top of net-next with Jakub's pp-providers changes cherry-picked. * NIC dependencies: 1. (strict) Devmem TCP require the NIC to support header split, i.e. the capability to split incoming packets into a header + payload and to put each into a separate buffer. Devmem TCP works by using device memory for the packet payload, and host memory for the packet headers. 2. (optional) Devmem TCP works better with flow steering support & RSS support, i.e. the NIC's ability to steer flows into certain rx queues. This allows the sysadmin to enable devmem TCP on a subset of the rx queues, and steer devmem TCP traffic onto these queues and non devmem TCP elsewhere. The NIC I have access to with these properties is the GVE with DQO support running in Google Cloud, but any NIC that supports these features would suffice. I may be able to help reviewers bring up devmem TCP on their NICs. * Testing: The series includes a udmabuf kselftest that show a simple use case of devmem TCP and validates the entire data path end to end without a dependency on a specific dmabuf provider. ** Test Setup Kernel: net-next with this series and memory provider API cherry-picked locally. Hardware: Google Cloud A3 VMs. NIC: GVE with header split & RSS & flow steering support. Cc: Pavel Begunkov <asml.silence(a)gmail.com> Cc: David Wei <dw(a)davidwei.uk> Cc: Jason Gunthorpe <jgg(a)ziepe.ca> Cc: Yunsheng Lin <linyunsheng(a)huawei.com> Cc: Shailend Chand <shailend(a)google.com> Cc: Harshitha Ramamurthy <hramamurthy(a)google.com> Cc: Shakeel Butt <shakeelb(a)google.com> Cc: Jeroen de Borst <jeroendb(a)google.com> Cc: Praveen Kaligineedi <pkaligineedi(a)google.com> Jakub Kicinski (1): net: page_pool: create hooks for custom page providers Mina Almasry (13): net: page_pool: factor out page_pool recycle check net: netdev netlink api to bind dma-buf to a net device netdev: support binding dma-buf to netdevice netdev: netdevice devmem allocator page_pool: convert to use netmem page_pool: devmem support memory-provider: dmabuf devmem memory provider net: support non paged skb frags net: add support for skbs with unreadable frags tcp: RX path for devmem TCP net: add SO_DEVMEM_DONTNEED setsockopt to release RX frags net: add devmem TCP documentation selftests: add ncdevmem, netcat for devmem TCP Documentation/netlink/specs/netdev.yaml | 52 +++ Documentation/networking/devmem.rst | 271 +++++++++++++ Documentation/networking/index.rst | 1 + arch/alpha/include/uapi/asm/socket.h | 8 +- arch/mips/include/uapi/asm/socket.h | 6 + arch/parisc/include/uapi/asm/socket.h | 6 + arch/sparc/include/uapi/asm/socket.h | 6 + include/linux/skbuff.h | 68 +++- include/linux/socket.h | 1 + include/net/devmem.h | 127 ++++++ include/net/netdev_rx_queue.h | 1 + include/net/netmem.h | 223 ++++++++++- include/net/page_pool/helpers.h | 117 ++++-- include/net/page_pool/types.h | 27 +- include/net/sock.h | 2 + include/net/tcp.h | 5 +- include/trace/events/page_pool.h | 28 +- include/uapi/asm-generic/socket.h | 6 + include/uapi/linux/netdev.h | 19 + include/uapi/linux/uio.h | 14 + net/bpf/test_run.c | 5 +- net/core/datagram.c | 6 + net/core/dev.c | 314 ++++++++++++++- net/core/gro.c | 7 +- net/core/netdev-genl-gen.c | 19 + net/core/netdev-genl-gen.h | 2 + net/core/netdev-genl.c | 123 ++++++ net/core/page_pool.c | 419 +++++++++++++------- net/core/skbuff.c | 92 ++++- net/core/sock.c | 45 +++ net/ipv4/tcp.c | 196 +++++++++- net/ipv4/tcp_input.c | 13 +- net/ipv4/tcp_ipv4.c | 9 + net/ipv4/tcp_output.c | 5 +- net/packet/af_packet.c | 4 +- tools/include/uapi/linux/netdev.h | 19 + tools/testing/selftests/net/.gitignore | 1 + tools/testing/selftests/net/Makefile | 5 + tools/testing/selftests/net/ncdevmem.c | 489 ++++++++++++++++++++++++ 39 files changed, 2527 insertions(+), 234 deletions(-) create mode 100644 Documentation/networking/devmem.rst create mode 100644 include/net/devmem.h create mode 100644 tools/testing/selftests/net/ncdevmem.c -- 2.43.0.472.g3155946c3a-goog

1 year, 5 months

2
20
0 0

[PATCH v9 0/5] Introduce mseal

by jeffxu＠chromium.org

From: Jeff Xu <jeffxu(a)chromium.org> This is V9 version, with removing MAP_SEALABLE and PROT_SEAL from mmap(), adding perfrmance benchmark and a test to demo the sealing of read-only memory segment of elf mapping. ------------------------------------------------------------------ This patchset proposes a new mseal() syscall for the Linux kernel. In a nutshell, mseal() protects the VMAs of a given virtual memory range against modifications, such as changes to their permission bits. Modern CPUs support memory permissions, such as the read/write (RW) and no-execute (NX) bits. Linux has supported NX since the release of kernel version 2.6.8 in August 2004 [1]. The memory permission feature improves the security stance on memory corruption bugs, as an attacker cannot simply write to arbitrary memory and point the code to it. The memory must be marked with the X bit, or else an exception will occur. Internally, the kernel maintains the memory permissions in a data structure called VMA (vm_area_struct). mseal() additionally protects the VMA itself against modifications of the selected seal type. Memory sealing is useful to mitigate memory corruption issues where a corrupted pointer is passed to a memory management system. For example, such an attacker primitive can break control-flow integrity guarantees since read-only memory that is supposed to be trusted can become writable or .text pages can get remapped. Memory sealing can automatically be applied by the runtime loader to seal .text and .rodata pages and applications can additionally seal security critical data at runtime. A similar feature already exists in the XNU kernel with the VM_FLAGS_PERMANENT [3] flag and on OpenBSD with the mimmutable syscall [4]. Also, Chrome wants to adopt this feature for their CFI work [2] and this patchset has been designed to be compatible with the Chrome use case. Two system calls are involved in sealing the map: mmap() and mseal(). The new mseal() is an syscall on 64 bit CPU, and with following signature: int mseal(void addr, size_t len, unsigned long flags) addr/len: memory range. flags: reserved. mseal() blocks following operations for the given memory range. 1> Unmapping, moving to another location, and shrinking the size, via munmap() and mremap(), can leave an empty space, therefore can be replaced with a VMA with a new set of attributes. 2> Moving or expanding a different VMA into the current location, via mremap(). 3> Modifying a VMA via mmap(MAP_FIXED). 4> Size expansion, via mremap(), does not appear to pose any specific risks to sealed VMAs. It is included anyway because the use case is unclear. In any case, users can rely on merging to expand a sealed VMA. 5> mprotect() and pkey_mprotect(). 6> Some destructive madvice() behaviors (e.g. MADV_DONTNEED) for anonymous memory, when users don't have write permission to the memory. Those behaviors can alter region contents by discarding pages, effectively a memset(0) for anonymous memory. The idea that inspired this patch comes from Stephen Röttger’s work in V8 CFI [5]. Chrome browser in ChromeOS will be the first user of this API. Indeed, the Chrome browser has very specific requirements for sealing, which are distinct from those of most applications. For example, in the case of libc, sealing is only applied to read-only (RO) or read-execute (RX) memory segments (such as .text and .RELRO) to prevent them from becoming writable, the lifetime of those mappings are tied to the lifetime of the process. Chrome wants to seal two large address space reservations that are managed by different allocators. The memory is mapped RW- and RWX respectively but write access to it is restricted using pkeys (or in the future ARM permission overlay extensions). The lifetime of those mappings are not tied to the lifetime of the process, therefore, while the memory is sealed, the allocators still need to free or discard the unused memory. For example, with madvise(DONTNEED). However, always allowing madvise(DONTNEED) on this range poses a security risk. For example if a jump instruction crosses a page boundary and the second page gets discarded, it will overwrite the target bytes with zeros and change the control flow. Checking write-permission before the discard operation allows us to control when the operation is valid. In this case, the madvise will only succeed if the executing thread has PKEY write permissions and PKRU changes are protected in software by control-flow integrity. Although the initial version of this patch series is targeting the Chrome browser as its first user, it became evident during upstream discussions that we would also want to ensure that the patch set eventually is a complete solution for memory sealing and compatible with other use cases. The specific scenario currently in mind is glibc's use case of loading and sealing ELF executables. To this end, Stephen is working on a change to glibc to add sealing support to the dynamic linker, which will seal all non-writable segments at startup. Once this work is completed, all applications will be able to automatically benefit from these new protections. In closing, I would like to formally acknowledge the valuable contributions received during the RFC process, which were instrumental in shaping this patch: Jann Horn: raising awareness and providing valuable insights on the destructive madvise operations. Liam R. Howlett: perf optimization. Linus Torvalds: assisting in defining system call signature and scope. Theo de Raadt: sharing the experiences and insight gained from implementing mimmutable() in OpenBSD. MM perf benchmarks ================== This patch adds a loop in the mprotect/munmap/madvise(DONTNEED) to check the VMAs’ sealing flag, so that no partial update can be made, when any segment within the given memory range is sealed. To measure the performance impact of this loop, two tests are developed. [8] The first is measuring the time taken for a particular system call, by using clock_gettime(CLOCK_MONOTONIC). The second is using PERF_COUNT_HW_REF_CPU_CYCLES (exclude user space). Both tests have similar results. The tests have roughly below sequence: for (i = 0; i < 1000, i++) create 1000 mappings (1 page per VMA) start the sampling for (j = 0; j < 1000, j++) mprotect one mapping stop and save the sample delete 1000 mappings calculates all samples. Below tests are performed on Intel(R) Pentium(R) Gold 7505 @ 2.00GHz, 4G memory, Chromebook. Based on the latest upstream code: The first test (measuring time) syscall__ vmas t t_mseal delta_ns per_vma % munmap__ 1 909 944 35 35 104% munmap__ 2 1398 1502 104 52 107% munmap__ 4 2444 2594 149 37 106% munmap__ 8 4029 4323 293 37 107% munmap__ 16 6647 6935 288 18 104% munmap__ 32 11811 12398 587 18 105% mprotect 1 439 465 26 26 106% mprotect 2 1659 1745 86 43 105% mprotect 4 3747 3889 142 36 104% mprotect 8 6755 6969 215 27 103% mprotect 16 13748 14144 396 25 103% mprotect 32 27827 28969 1142 36 104% madvise_ 1 240 262 22 22 109% madvise_ 2 366 442 76 38 121% madvise_ 4 623 751 128 32 121% madvise_ 8 1110 1324 215 27 119% madvise_ 16 2127 2451 324 20 115% madvise_ 32 4109 4642 534 17 113% The second test (measuring cpu cycle) syscall__ vmas cpu cmseal delta_cpu per_vma % munmap__ 1 1790 1890 100 100 106% munmap__ 2 2819 3033 214 107 108% munmap__ 4 4959 5271 312 78 106% munmap__ 8 8262 8745 483 60 106% munmap__ 16 13099 14116 1017 64 108% munmap__ 32 23221 24785 1565 49 107% mprotect 1 906 967 62 62 107% mprotect 2 3019 3203 184 92 106% mprotect 4 6149 6569 420 105 107% mprotect 8 9978 10524 545 68 105% mprotect 16 20448 21427 979 61 105% mprotect 32 40972 42935 1963 61 105% madvise_ 1 434 497 63 63 115% madvise_ 2 752 899 147 74 120% madvise_ 4 1313 1513 200 50 115% madvise_ 8 2271 2627 356 44 116% madvise_ 16 4312 4883 571 36 113% madvise_ 32 8376 9319 943 29 111% Based on the result, for 6.8 kernel, sealing check adds 20-40 nano seconds, or around 50-100 CPU cycles, per VMA. In addition, I applied the sealing to 5.10 kernel: The first test (measuring time) syscall__ vmas t tmseal delta_ns per_vma % munmap__ 1 357 390 33 33 109% munmap__ 2 442 463 21 11 105% munmap__ 4 614 634 20 5 103% munmap__ 8 1017 1137 120 15 112% munmap__ 16 1889 2153 263 16 114% munmap__ 32 4109 4088 -21 -1 99% mprotect 1 235 227 -7 -7 97% mprotect 2 495 464 -30 -15 94% mprotect 4 741 764 24 6 103% mprotect 8 1434 1437 2 0 100% mprotect 16 2958 2991 33 2 101% mprotect 32 6431 6608 177 6 103% madvise_ 1 191 208 16 16 109% madvise_ 2 300 324 24 12 108% madvise_ 4 450 473 23 6 105% madvise_ 8 753 806 53 7 107% madvise_ 16 1467 1592 125 8 108% madvise_ 32 2795 3405 610 19 122% The second test (measuring cpu cycle) syscall__ nbr_vma cpu cmseal delta_cpu per_vma % munmap__ 1 684 715 31 31 105% munmap__ 2 861 898 38 19 104% munmap__ 4 1183 1235 51 13 104% munmap__ 8 1999 2045 46 6 102% munmap__ 16 3839 3816 -23 -1 99% munmap__ 32 7672 7887 216 7 103% mprotect 1 397 443 46 46 112% mprotect 2 738 788 50 25 107% mprotect 4 1221 1256 35 9 103% mprotect 8 2356 2429 72 9 103% mprotect 16 4961 4935 -26 -2 99% mprotect 32 9882 10172 291 9 103% madvise_ 1 351 380 29 29 108% madvise_ 2 565 615 49 25 109% madvise_ 4 872 933 61 15 107% madvise_ 8 1508 1640 132 16 109% madvise_ 16 3078 3323 245 15 108% madvise_ 32 5893 6704 811 25 114% For 5.10 kernel, sealing check adds 0-15 ns in time, or 10-30 CPU cycles, there is even decrease in some cases. It might be interesting to compare 5.10 and 6.8 kernel The first test (measuring time) syscall__ vmas t_5_10 t_6_8 delta_ns per_vma % munmap__ 1 357 909 552 552 254% munmap__ 2 442 1398 956 478 316% munmap__ 4 614 2444 1830 458 398% munmap__ 8 1017 4029 3012 377 396% munmap__ 16 1889 6647 4758 297 352% munmap__ 32 4109 11811 7702 241 287% mprotect 1 235 439 204 204 187% mprotect 2 495 1659 1164 582 335% mprotect 4 741 3747 3006 752 506% mprotect 8 1434 6755 5320 665 471% mprotect 16 2958 13748 10790 674 465% mprotect 32 6431 27827 21397 669 433% madvise_ 1 191 240 49 49 125% madvise_ 2 300 366 67 33 122% madvise_ 4 450 623 173 43 138% madvise_ 8 753 1110 357 45 147% madvise_ 16 1467 2127 660 41 145% madvise_ 32 2795 4109 1314 41 147% The second test (measuring cpu cycle) syscall__ vmas cpu_5_10 c_6_8 delta_cpu per_vma % munmap__ 1 684 1790 1106 1106 262% munmap__ 2 861 2819 1958 979 327% munmap__ 4 1183 4959 3776 944 419% munmap__ 8 1999 8262 6263 783 413% munmap__ 16 3839 13099 9260 579 341% munmap__ 32 7672 23221 15549 486 303% mprotect 1 397 906 509 509 228% mprotect 2 738 3019 2281 1140 409% mprotect 4 1221 6149 4929 1232 504% mprotect 8 2356 9978 7622 953 423% mprotect 16 4961 20448 15487 968 412% mprotect 32 9882 40972 31091 972 415% madvise_ 1 351 434 82 82 123% madvise_ 2 565 752 186 93 133% madvise_ 4 872 1313 442 110 151% madvise_ 8 1508 2271 763 95 151% madvise_ 16 3078 4312 1234 77 140% madvise_ 32 5893 8376 2483 78 142% From 5.10 to 6.8 munmap: added 250-550 ns in time, or 500-1100 in cpu cycle, per vma. mprotect: added 200-750 ns in time, or 500-1200 in cpu cycle, per vma. madvise: added 33-50 ns in time, or 70-110 in cpu cycle, per vma. In comparison to mseal, which adds 20-40 ns or 50-100 CPU cycles, the increase from 5.10 to 6.8 is significantly larger, approximately ten times greater for munmap and mprotect. When I discuss the mm performance with Brian Makin, an engineer worked on performance, it was brought to my attention that such a performance benchmarks, which measuring millions of mm syscall in a tight loop, may not accurately reflect real-world scenarios, such as that of a database service. Also this is tested using a single HW and ChromeOS, the data from another HW or distribution might be different. It might be best to take this data with a grain of salt. Change history: =============== V9: - remove mmap(PROT_SEAL) and mmap(MAP_SEALABLE) (Linus, Theo de Raadt) - Update mseal_test to check for prot bit (Liam R. Howlett) - Update documentation to give more detail on sealing check (Liam R. Howlett) - Add seal_elf test. - Add performance measure data. - mseal_test: fix arm build. V8: - perf optimization in mmap. (Liam R. Howlett) - add one testcase (test_seal_zero_address) - Update mseal.rst to add note for MAP_SEALABLE. https://lore.kernel.org/lkml/20240131175027.3287009-1-jeffxu@chromium.org/ V7: - fix index.rst (Randy Dunlap) - fix arm build (Randy Dunlap) - return EPERM for blocked operations (Theo de Raadt) https://lore.kernel.org/linux-mm/20240122152905.2220849-2-jeffxu@chromium.o… V6: - Drop RFC from subject, Given Linus's general approval. - Adjust syscall number for mseal (main Jan.11/2024) - Code style fix (Matthew Wilcox) - selftest: use ksft macros (Muhammad Usama Anjum) - Document fix. (Randy Dunlap) https://lore.kernel.org/all/20240111234142.2944934-1-jeffxu@chromium.org/ V5: - fix build issue in mseal-Wire-up-mseal-syscall (Suggested by Linus Torvalds, and Greg KH) - updates on selftest. https://lore.kernel.org/lkml/20240109154547.1839886-1-jeffxu@chromium.org/#r V4: (Suggested by Linus Torvalds) - new signature: mseal(start,len,flags) - 32 bit is not supported. vm_seal is removed, use vm_flags instead. - single bit in vm_flags for sealed state. - CONFIG_MSEAL kernel config is removed. - single bit of PROT_SEAL in the "Prot" field of mmap(). Other changes: - update selftest (Suggested by Muhammad Usama Anjum) - update documentation. https://lore.kernel.org/all/20240104185138.169307-1-jeffxu@chromium.org/ V3: - Abandon per-syscall approach, (Suggested by Linus Torvalds). - Organize sealing types around their functionality, such as MM_SEAL_BASE, MM_SEAL_PROT_PKEY. - Extend the scope of sealing from calls originated in userspace to both kernel and userspace. (Suggested by Linus Torvalds) - Add seal type support in mmap(). (Suggested by Pedro Falcato) - Add a new sealing type: MM_SEAL_DISCARD_RO_ANON to prevent destructive operations of madvise. (Suggested by Jann Horn and Stephen Röttger) - Make sealed VMAs mergeable. (Suggested by Jann Horn) - Add MAP_SEALABLE to mmap() - Add documentation - mseal.rst https://lore.kernel.org/linux-mm/20231212231706.2680890-2-jeffxu@chromium.o… v2: Use _BITUL to define MM_SEAL_XX type. Use unsigned long for seal type in sys_mseal() and other functions. Remove internal VM_SEAL_XX type and convert_user_seal_type(). Remove MM_ACTION_XX type. Remove caller_origin(ON_BEHALF_OF_XX) and replace with sealing bitmask. Add more comments in code. Add a detailed commit message. https://lore.kernel.org/lkml/20231017090815.1067790-1-jeffxu@chromium.org/ v1: https://lore.kernel.org/lkml/20231016143828.647848-1-jeffxu@chromium.org/ ---------------------------------------------------------------- [1] https://kernelnewbies.org/Linux_2_6_8 [2] https://v8.dev/blog/control-flow-integrity [3] https://github.com/apple-oss-distributions/xnu/blob/1031c584a5e37aff177559b… [4] https://man.openbsd.org/mimmutable.2 [5] https://docs.google.com/document/d/1O2jwK4dxI3nRcOJuPYkonhTkNQfbmwdvxQMyXge… [6] https://lore.kernel.org/lkml/CAG48ez3ShUYey+ZAFsU2i1RpQn0a5eOs2hzQ426Fkcgnf… [7] https://lore.kernel.org/lkml/20230515130553.2311248-1-jeffxu@chromium.org/ [8] https://github.com/peaktocreek/mmperf Jeff Xu (5): mseal: Wire up mseal syscall mseal: add mseal syscall selftest mm/mseal memory sealing mseal:add documentation selftest mm/mseal read-only elf memory segment Documentation/userspace-api/index.rst | 1 + Documentation/userspace-api/mseal.rst | 199 ++ arch/alpha/kernel/syscalls/syscall.tbl | 1 + arch/arm/tools/syscall.tbl | 1 + arch/arm64/include/asm/unistd.h | 2 +- arch/arm64/include/asm/unistd32.h | 2 + arch/m68k/kernel/syscalls/syscall.tbl | 1 + arch/microblaze/kernel/syscalls/syscall.tbl | 1 + arch/mips/kernel/syscalls/syscall_n32.tbl | 1 + arch/mips/kernel/syscalls/syscall_n64.tbl | 1 + arch/mips/kernel/syscalls/syscall_o32.tbl | 1 + arch/parisc/kernel/syscalls/syscall.tbl | 1 + arch/powerpc/kernel/syscalls/syscall.tbl | 1 + arch/s390/kernel/syscalls/syscall.tbl | 1 + arch/sh/kernel/syscalls/syscall.tbl | 1 + arch/sparc/kernel/syscalls/syscall.tbl | 1 + arch/x86/entry/syscalls/syscall_32.tbl | 1 + arch/x86/entry/syscalls/syscall_64.tbl | 1 + arch/xtensa/kernel/syscalls/syscall.tbl | 1 + include/linux/syscalls.h | 1 + include/uapi/asm-generic/unistd.h | 5 +- kernel/sys_ni.c | 1 + mm/Makefile | 4 + mm/internal.h | 37 + mm/madvise.c | 12 + mm/mmap.c | 31 +- mm/mprotect.c | 10 + mm/mremap.c | 31 + mm/mseal.c | 307 ++++ tools/testing/selftests/mm/.gitignore | 2 + tools/testing/selftests/mm/Makefile | 2 + tools/testing/selftests/mm/mseal_test.c | 1836 +++++++++++++++++++ tools/testing/selftests/mm/seal_elf.c | 183 ++ 33 files changed, 2678 insertions(+), 3 deletions(-) create mode 100644 Documentation/userspace-api/mseal.rst create mode 100644 mm/mseal.c create mode 100644 tools/testing/selftests/mm/mseal_test.c create mode 100644 tools/testing/selftests/mm/seal_elf.c -- 2.43.0.687.g38aa6559b0-goog

1 year, 5 months

1
5
0 0

[PATCH] selftests/mm: Don't needlessly use sudo to obtain root in run_vmtests.sh

by Mark Brown

When opening yama/ptrace_scope we unconditionally use sudo to ensure we are running as root, resulting in failures if running in a minimal root filesystem where sudo is not installed. Since automated test systems will typically just run all of kselftest as root (and many kselftests rely on this for full functionality) add a check to see if we're already root and only invoke sudo if not. Since I am unclear what the intended effect of the command being run is I have not added any error handling for the case where we fail to obtain root. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/mm/run_vmtests.sh | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/run_vmtests.sh b/tools/testing/selftests/mm/run_vmtests.sh index fe140a9f4f9d..c8ca830dba93 100755 --- a/tools/testing/selftests/mm/run_vmtests.sh +++ b/tools/testing/selftests/mm/run_vmtests.sh @@ -248,6 +248,17 @@ run_test() { echo "TAP version 13" | tap_output +HAVE_ROOT=0 +if [ "$(id -u)" = "0" ]; then + AS_ROOT= + HAVE_ROOT=1 +elif [ "$(command -v sudo)" != "" ]; then + AS_ROOT=sudo + HAVE_ROOT=1 +else + echo # WARNING: Unable to run as root +fi + CATEGORY="hugetlb" run_test ./hugepage-mmap shmmax=$(cat /proc/sys/kernel/shmmax) @@ -363,7 +374,8 @@ CATEGORY="hmm" run_test bash ./test_hmm.sh smoke # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests CATEGORY="madv_populate" run_test ./madv_populate -(echo 0 | sudo tee /proc/sys/kernel/yama/ptrace_scope 2>&1) | tap_prefix +# FIXME: What if we can't get root? +(echo 0 | ${AS_ROOT} tee /proc/sys/kernel/yama/ptrace_scope 2>&1) | tap_prefix CATEGORY="memfd_secret" run_test ./memfd_secret # KSM KSM_MERGE_TIME_HUGE_PAGES test with size of 100 --- base-commit: 445a555e0623387fa9b94e68e61681717e70200a change-id: 20240209-kselftest-mm-check-deps-01a825e5fed4 Best regards, -- Mark Brown <broonie(a)kernel.org>

1 year, 5 months

2
5
0 0

kselftest/next kselftest-seccomp: 2 runs, 1 regressions (v6.8-rc1-32-g345e8abe4c355)

by kernelci.org bot

kselftest/next kselftest-seccomp: 2 runs, 1 regressions (v6.8-rc1-32-g345e8abe4c355) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-10 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v6.8-rc1-32-g345… Test: kselftest-seccomp Tree: kselftest Branch: next Describe: v6.8-rc1-32-g345e8abe4c355 URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: 345e8abe4c355bc24bab3f4a5634122e55be8665 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-10 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/65cc665746126920c2637012 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: multi_v7_defconfig+kselftest Compiler: gcc-10 (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//kselftest/next/v6.8-rc1-32-g345e8abe4c355/arm… HTML log: https://storage.kernelci.org//kselftest/next/v6.8-rc1-32-g345e8abe4c355/arm… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bullseye-kselftest/2023062… * kselftest-seccomp.login: https://kernelci.org/test/case/id/65cc665746126920c2637013 new failure (last pass: v6.8-rc1)

1 year, 5 months

1
0
0 0

kselftest/next kselftest-livepatch: 1 runs, 1 regressions (v6.8-rc1-32-g345e8abe4c355)

by kernelci.org bot

kselftest/next kselftest-livepatch: 1 runs, 1 regressions (v6.8-rc1-32-g345e8abe4c355) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ----------------+------+---------------+----------+------------------------------+------------ imx6q-sabrelite | arm | lab-collabora | gcc-10 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v6.8-rc1-32-g345… Test: kselftest-livepatch Tree: kselftest Branch: next Describe: v6.8-rc1-32-g345e8abe4c355 URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: 345e8abe4c355bc24bab3f4a5634122e55be8665 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ----------------+------+---------------+----------+------------------------------+------------ imx6q-sabrelite | arm | lab-collabora | gcc-10 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/65cc6163387b991438637014 Results: 1 PASS, 1 FAIL, 0 SKIP Full config: multi_v7_defconfig+kselftest Compiler: gcc-10 (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//kselftest/next/v6.8-rc1-32-g345e8abe4c355/arm… HTML log: https://storage.kernelci.org//kselftest/next/v6.8-rc1-32-g345e8abe4c355/arm… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bullseye-kselftest/2023062… * kselftest-livepatch.shardfile-livepatch: https://kernelci.org/test/case/id/65cc6163387b991438637016 new failure (last pass: v6.8-rc1) 2024-02-14T06:44:10.893373 / # 2024-02-14T06:44:10.900024 2024-02-14T06:44:16.051965 / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/12761214/extract-nfsrootfs-4r6083o6' 2024-02-14T06:44:16.063460 export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/12761214/extract-nfsrootfs-4r6083o6' 2024-02-14T06:44:18.308382 / # export NFS_SERVER_IP='192.168.201.1' 2024-02-14T06:44:18.319349 export NFS_SERVER_IP='192.168.201.1' 2024-02-14T06:44:18.438006 / # # 2024-02-14T06:44:18.445186 # 2024-02-14T06:44:18.562958 / # export SHELL=/bin/bash 2024-02-14T06:44:18.573046 export SHELL=/bin/bash ... (47 line(s) more)

1 year, 5 months

1
0
0 0

kselftest/next kselftest-lkdtm: 2 runs, 1 regressions (v6.8-rc1-32-g345e8abe4c355)

by kernelci.org bot

kselftest/next kselftest-lkdtm: 2 runs, 1 regressions (v6.8-rc1-32-g345e8abe4c355) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ----------------+------+---------------+----------+------------------------------+------------ imx6q-sabrelite | arm | lab-collabora | gcc-10 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v6.8-rc1-32-g345… Test: kselftest-lkdtm Tree: kselftest Branch: next Describe: v6.8-rc1-32-g345e8abe4c355 URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: 345e8abe4c355bc24bab3f4a5634122e55be8665 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ----------------+------+---------------+----------+------------------------------+------------ imx6q-sabrelite | arm | lab-collabora | gcc-10 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/65cc631d8d16bbc0b2637012 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: multi_v7_defconfig+kselftest Compiler: gcc-10 (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//kselftest/next/v6.8-rc1-32-g345e8abe4c355/arm… HTML log: https://storage.kernelci.org//kselftest/next/v6.8-rc1-32-g345e8abe4c355/arm… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bullseye-kselftest/2023062… * kselftest-lkdtm.login: https://kernelci.org/test/case/id/65cc631d8d16bbc0b2637013 failing since 440 days (last pass: v6.1-rc1-23-g00dd59519141, first fail: v6.1-rc1-23-g8008d88e6d16)

1 year, 5 months

1
0
0 0

kselftest/next build: 5 builds: 2 failed, 3 passed, 2 errors, 5 warnings (v6.8-rc1-32-g345e8abe4c355)

by kernelci.org bot

kselftest/next build: 5 builds: 2 failed, 3 passed, 2 errors, 5 warnings (v6.8-rc1-32-g345e8abe4c355) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v6.8-rc1-32-g345e8a… Tree: kselftest Branch: next Git Describe: v6.8-rc1-32-g345e8abe4c355 Git Commit: 345e8abe4c355bc24bab3f4a5634122e55be8665 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures Build Failures Detected: i386: i386_defconfig+kselftest: (gcc-10) FAIL x86_64: x86_64_defconfig+kselftest: (gcc-10) FAIL Errors and Warnings Detected: arm64: defconfig+kselftest (gcc-10): 1 warning arm: multi_v7_defconfig+kselftest (gcc-10): 1 warning i386: i386_defconfig+kselftest (gcc-10): 1 error, 1 warning x86_64: x86_64_defconfig+kselftest (gcc-10): 1 error, 1 warning x86_64_defconfig+kselftest (clang-16): 1 warning Errors summary: 2 include/linux/fortify-string.h:57:29: error: ‘__builtin_memcpy’ offset 32 is out of the bounds [0, 0] [-Werror=array-bounds] Warnings summary: 2 include/linux/fortify-string.h:57:29: warning: ‘__builtin_memcpy’ offset 32 is out of the bounds [0, 0] [-Warray-bounds] 2 cc1: all warnings being treated as errors 1 vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x39: relocation to !ENDBR: .text+0x14cfd6 ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-10) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: include/linux/fortify-string.h:57:29: warning: ‘__builtin_memcpy’ offset 32 is out of the bounds [0, 0] [-Warray-bounds] -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-10) — FAIL, 1 error, 1 warning, 0 section mismatches Errors: include/linux/fortify-string.h:57:29: error: ‘__builtin_memcpy’ offset 32 is out of the bounds [0, 0] [-Werror=array-bounds] Warnings: cc1: all warnings being treated as errors -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-10) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: include/linux/fortify-string.h:57:29: warning: ‘__builtin_memcpy’ offset 32 is out of the bounds [0, 0] [-Warray-bounds] -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-10) — FAIL, 1 error, 1 warning, 0 section mismatches Errors: include/linux/fortify-string.h:57:29: error: ‘__builtin_memcpy’ offset 32 is out of the bounds [0, 0] [-Werror=array-bounds] Warnings: cc1: all warnings being treated as errors -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-16) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x39: relocation to !ENDBR: .text+0x14cfd6 --- For more info write to <info(a)kernelci.org>

1 year, 5 months

1
0
0 0

[PATCH] selftests: damon: add access_memory to .gitignore

by Javier Carrasco

This binary is missing in the .gitignore and stays as an untracked file. Reported-by: Bernd Edlinger <bernd.edlinger(a)hotmail.de> Closes: https://lore.kernel.org/all/AS8P193MB1285C963658008F1B2702AF7E4792@AS8P193M… Reviewed-by: SeongJae Park <sj(a)kernel.org> Signed-off-by: Javier Carrasco <javier.carrasco.cruz(a)gmail.com> --- tools/testing/selftests/damon/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/damon/.gitignore b/tools/testing/selftests/damon/.gitignore index d861701f0327..e65ef9d9cedc 100644 --- a/tools/testing/selftests/damon/.gitignore +++ b/tools/testing/selftests/damon/.gitignore @@ -2,3 +2,4 @@ huge_count_read_write debugfs_target_ids_read_before_terminate_race debugfs_target_ids_pid_leak +access_memory --- base-commit: 7e56cf9a7f108e8129d75cea0dabc9488fb4defa change-id: 20240214-damon_selftest_gitignore-d1586d2f58ff Best regards, -- Javier Carrasco <javier.carrasco.cruz(a)gmail.com>

1 year, 5 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror