- Linux-kselftest-mirror - lists.linaro.org

[PATCH net 0/3] selftests: net: lib: small fixes

by Matthieu Baerts (NGI0)

While looking at using 'lib.sh' for the MPTCP selftests [1], we found some small issues with 'lib.sh'. Here they are: - Patch 1: fix 'errexit' (set -e) support with busywait. 'errexit' is supported in some functions, not all. A fix for v6.8+. - Patch 2: avoid confusing error messages linked to the cleaning part when the netns setup fails. A fix for v6.8+. - Patch 3: set a variable as local to avoid accidentally changing the value of a another one with the same name on the caller side. A fix for v6.10-rc1+. Link: https://lore.kernel.org/mptcp/5f4615c3-0621-43c5-ad25-55747a4350ce@kernel.o… [1] Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Matthieu Baerts (NGI0) (3): selftests: net: lib: support errexit with busywait selftests: net: lib: avoid error removing empty netns name selftests: net: lib: set 'i' as local tools/testing/selftests/net/lib.sh | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) --- base-commit: a535d59432370343058755100ee75ab03c0e3f91 change-id: 20240605-upstream-net-20240605-selftests-net-lib-fixes-7a90a1a8d9d2 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

1 year, 6 months

5
12
0 0

[PATCH v2] selftest: mm: Test if hugepage does not get leaked during __bio_release_pages()

by Donet Tom

Commit 1b151e2435fc ("block: Remove special-casing of compound pages") caused a change in behaviour when releasing the pages if the buffer does not start at the beginning of the page. This was because the calculation of the number of pages to release was incorrect. This was fixed by commit 38b43539d64b ("block: Fix page refcounts for unaligned buffers in __bio_release_pages()"). We pin the user buffer during direct I/O writes. If this buffer is a hugepage, bio_release_page() will unpin it and decrement all references and pin counts at ->bi_end_io. However, if any references to the hugepage remain post-I/O, the hugepage will not be freed upon unmap, leading to a memory leak. This patch verifies that a hugepage, used as a user buffer for DIO operations, is correctly freed upon unmapping, regardless of whether the offsets are aligned or unaligned w.r.t page boundary. Test Result Fail Scenario (Without the fix) -------------------------------------------------------- []# ./hugetlb_dio TAP version 13 1..4 No. Free pages before allocation : 7 No. Free pages after munmap : 7 ok 1 : Huge pages freed successfully ! No. Free pages before allocation : 7 No. Free pages after munmap : 7 ok 2 : Huge pages freed successfully ! No. Free pages before allocation : 7 No. Free pages after munmap : 7 ok 3 : Huge pages freed successfully ! No. Free pages before allocation : 7 No. Free pages after munmap : 6 not ok 4 : Huge pages not freed! Totals: pass:3 fail:1 xfail:0 xpass:0 skip:0 error:0 Test Result PASS Scenario (With the fix) --------------------------------------------------------- []#./hugetlb_dio TAP version 13 1..4 No. Free pages before allocation : 7 No. Free pages after munmap : 7 ok 1 : Huge pages freed successfully ! No. Free pages before allocation : 7 No. Free pages after munmap : 7 ok 2 : Huge pages freed successfully ! No. Free pages before allocation : 7 No. Free pages after munmap : 7 ok 3 : Huge pages freed successfully ! No. Free pages before allocation : 7 No. Free pages after munmap : 7 ok 4 : Huge pages freed successfully ! Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0 V2: - Addressed all review commets from Muhammad Usama Anjum V1: https://lore.kernel.org/all/20240523063905.3173-1-donettom@linux.ibm.com/#t Signed-off-by: Donet Tom <donettom(a)linux.ibm.com> Co-developed-by: Ritesh Harjani (IBM) <ritesh.list(a)gmail.com> Signed-off-by: Ritesh Harjani (IBM) <ritesh.list(a)gmail.com> --- tools/testing/selftests/mm/Makefile | 1 + tools/testing/selftests/mm/hugetlb_dio.c | 118 +++++++++++++++++++++++ 2 files changed, 119 insertions(+) create mode 100644 tools/testing/selftests/mm/hugetlb_dio.c diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index 3b49bc3d0a3b..a1748a4c7df1 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -73,6 +73,7 @@ TEST_GEN_FILES += ksm_functional_tests TEST_GEN_FILES += mdwe_test TEST_GEN_FILES += hugetlb_fault_after_madv TEST_GEN_FILES += hugetlb_madv_vs_map +TEST_GEN_FILES += hugetlb_dio ifneq ($(ARCH),arm64) TEST_GEN_FILES += soft-dirty diff --git a/tools/testing/selftests/mm/hugetlb_dio.c b/tools/testing/selftests/mm/hugetlb_dio.c new file mode 100644 index 000000000000..e4f4924179c8 --- /dev/null +++ b/tools/testing/selftests/mm/hugetlb_dio.c @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This program tests for hugepage leaks after DIO writes to a file using a + * hugepage as the user buffer. During DIO, the user buffer is pinned and + * should be properly unpinned upon completion. This patch verifies that the + * kernel correctly unpins the buffer at DIO completion for both aligned and + * unaligned user buffer offsets (w.r.t page boundary), ensuring the hugepage + * is freed upon unmapping. + */ + +#define _GNU_SOURCE +#include <stdio.h> +#include <sys/stat.h> +#include <stdlib.h> +#include <fcntl.h> +#include <stdint.h> +#include <unistd.h> +#include <string.h> +#include <sys/mman.h> +#include "vm_util.h" +#include "../kselftest.h" + +void run_dio_using_hugetlb(unsigned int start_off, unsigned int end_off) +{ + int fd; + char *buffer = NULL; + char *orig_buffer = NULL; + size_t h_pagesize = 0; + size_t writesize; + int free_hpage_b = 0; + int free_hpage_a = 0; + const int mmap_flags = MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB; + const int mmap_prot = PROT_READ | PROT_WRITE; + + writesize = end_off - start_off; + + /* Get the default huge page size */ + h_pagesize = default_huge_page_size(); + if (!h_pagesize) + ksft_exit_fail_msg("Unable to determine huge page size\n"); + + /* Open the file to DIO */ + fd = open("/tmp", O_TMPFILE | O_RDWR | O_DIRECT); + if (fd < 0) + ksft_exit_fail_perror("Error opening file\n"); + + /* Get the free huge pages before allocation */ + free_hpage_b = get_free_hugepages(); + if (free_hpage_b == 0) { + close(fd); + ksft_exit_skip("No free hugepage, exiting!\n"); + } + + /* Allocate a hugetlb page */ + orig_buffer = mmap(NULL, h_pagesize, mmap_prot, mmap_flags, -1, 0); + if (orig_buffer == MAP_FAILED) { + close(fd); + ksft_exit_fail_perror("Error mapping memory\n"); + } + buffer = orig_buffer; + buffer += start_off; + + memset(buffer, 'A', writesize); + + /* Write the buffer to the file */ + if (write(fd, buffer, writesize) != (writesize)) { + munmap(orig_buffer, h_pagesize); + close(fd); + ksft_exit_fail_perror("Error writing to file\n"); + } + + /* unmap the huge page */ + munmap(orig_buffer, h_pagesize); + close(fd); + + /* Get the free huge pages after unmap*/ + free_hpage_a = get_free_hugepages(); + + /* + * If the no. of free hugepages before allocation and after unmap does + * not match - that means there could still be a page which is pinned. + */ + if (free_hpage_a != free_hpage_b) { + ksft_print_msg("No. Free pages before allocation : %d\n", free_hpage_b); + ksft_print_msg("No. Free pages after munmap : %d\n", free_hpage_a); + ksft_test_result_fail(": Huge pages not freed!\n"); + } else { + ksft_print_msg("No. Free pages before allocation : %d\n", free_hpage_b); + ksft_print_msg("No. Free pages after munmap : %d\n", free_hpage_a); + ksft_test_result_pass(": Huge pages freed successfully !\n"); + } +} + +int main(void) +{ + size_t pagesize = 0; + + ksft_print_header(); + ksft_set_plan(4); + + /* Get base page size */ + pagesize = psize(); + + /* start and end is aligned to pagesize */ + run_dio_using_hugetlb(0, (pagesize * 3)); + + /* start is aligned but end is not aligned */ + run_dio_using_hugetlb(0, (pagesize * 3) - (pagesize / 2)); + + /* start is unaligned and end is aligned */ + run_dio_using_hugetlb(pagesize / 2, (pagesize * 3)); + + /* both start and end are unaligned */ + run_dio_using_hugetlb(pagesize / 2, (pagesize * 3) + (pagesize / 2)); + + ksft_finished(); +} + -- 2.43.0

1 year, 6 months

2
2
0 0

[PATCH net-next] selftests: hsr: Extend the hsr_ping.sh test to use fixed MAC addresses

by Lukasz Majewski

Fixed MAC addresses help with debugging as last four bytes identify the network namespace. Signed-off-by: Lukasz Majewski <lukma(a)denx.de> --- tools/testing/selftests/net/hsr/hsr_ping.sh | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/tools/testing/selftests/net/hsr/hsr_ping.sh b/tools/testing/selftests/net/hsr/hsr_ping.sh index 3684b813b0f6..f5d207fc770a 100755 --- a/tools/testing/selftests/net/hsr/hsr_ping.sh +++ b/tools/testing/selftests/net/hsr/hsr_ping.sh @@ -152,6 +152,15 @@ setup_hsr_interfaces() ip -net "$ns3" addr add 100.64.0.3/24 dev hsr3 ip -net "$ns3" addr add dead:beef:1::3/64 dev hsr3 nodad + ip -net "$ns1" link set address 00:11:22:00:01:01 dev ns1eth1 + ip -net "$ns1" link set address 00:11:22:00:01:02 dev ns1eth2 + + ip -net "$ns2" link set address 00:11:22:00:02:01 dev ns2eth1 + ip -net "$ns2" link set address 00:11:22:00:02:02 dev ns2eth2 + + ip -net "$ns3" link set address 00:11:22:00:03:01 dev ns3eth1 + ip -net "$ns3" link set address 00:11:22:00:03:02 dev ns3eth2 + # All Links up ip -net "$ns1" link set ns1eth1 up ip -net "$ns1" link set ns1eth2 up -- 2.20.1

1 year, 6 months

3
4
0 0

[PATCH v5 00/16] selftests/resctrl: resctrl_val() related cleanups & improvements

by Ilpo Järvinen

Hi all, This series does a number of cleanups into resctrl_val() and generalizes it by removing test name specific handling from the function. Hopefully these reach also Shuah successfully as I've recently seen rejects for mail from @linux.intel.com to gmail addresses. v5: - Open mem bw file only once and use rewind(). - Add \n to mem bw file read to allow reading fresh values from the file. - Return 0 if create_grp() is given NULL grp_name (matches the original behavior). Mention this in function's kerneldoc. - Cast pid_t to int before printing with %d. - Caps/typo fixes to kerneldoc and commit messages. - Use imperative tone in commit messages and improve them based on points that came up during review. v4: - Merged close fix into IMC READ+WRITE rework patch - Add loop to reset imc_counters_config fds to -1 to be able know which need closing - Introduce perf_close_imc_mem_bw() to close fds - Open resctrl mem bw file (twice) beforehand to avoid opening it during the test - Remove MBM .mongrp setup - Remove mongrp from CMT test v3: - Rename init functions to <testname>_init() - Replace for loops with READ+WRITE statements for clarity - Don't drop Return: entry from perf_open_imc_mem_bw() func comment - New patch: Fix closing of IMC fds in case of error - New patch: Make "bandwidth" consistent in comments & prints - New patch: Simplify mem bandwidth file code - Remove wrong comment - Changed grp_name check to return -1 on fail (internal sanity check) v2: - Resolved conflicts with kselftest/next - Spaces -> tabs correction Ilpo Järvinen (16): selftests/resctrl: Fix closing IMC fds on error and open-code R+W instead of loops selftests/resctrl: Calculate resctrl FS derived mem bw over sleep(1) only selftests/resctrl: Make "bandwidth" consistent in comments & prints selftests/resctrl: Consolidate get_domain_id() into resctrl_val() selftests/resctrl: Use correct type for pids selftests/resctrl: Cleanup bm_pid and ppid usage & limit scope selftests/resctrl: Rename measure_vals() to measure_mem_bw_vals() & document selftests/resctrl: Simplify mem bandwidth file code for MBA & MBM tests selftests/resctrl: Add ->measure() callback to resctrl_val_param selftests/resctrl: Add ->init() callback into resctrl_val_param selftests/resctrl: Simplify bandwidth report type handling selftests/resctrl: Make some strings passed to resctrlfs functions const selftests/resctrl: Convert ctrlgrp & mongrp to pointers selftests/resctrl: Remove mongrp from MBA test selftests/resctrl: Remove mongrp from CMT test selftests/resctrl: Remove test name comparing from write_bm_pid_to_resctrl() tools/testing/selftests/resctrl/cache.c | 10 +- tools/testing/selftests/resctrl/cat_test.c | 5 +- tools/testing/selftests/resctrl/cmt_test.c | 22 +- tools/testing/selftests/resctrl/mba_test.c | 26 +- tools/testing/selftests/resctrl/mbm_test.c | 26 +- tools/testing/selftests/resctrl/resctrl.h | 49 ++- tools/testing/selftests/resctrl/resctrl_val.c | 364 ++++++++---------- tools/testing/selftests/resctrl/resctrlfs.c | 67 ++-- 8 files changed, 290 insertions(+), 279 deletions(-) -- 2.39.2

1 year, 6 months

3
23
0 0

[Bug Report] selftests: arm64: build errors

by Muhammad Usama Anjum

Hi, I'm trying to build arm64 selftests on next-20240529. I'm getting build failures. Complete logs are attached while some snippets are as following: gcc pac.c /pauth/pac_corruptor.o /pauth/helper.o -o /pauth/pac -Wall -O2 -g -I/linux_mainline/tools/testing/selftests/ -I/linux_mainline/tools/include -mbranch-protection=pac-ret -march=armv8.2-a In file included from pac.c:13: ../../kselftest_harness.h: In function ‘clone3_vfork’: ../../kselftest_harness.h:88:9: error: variable ‘args’ has initializer but incomplete type 88 | struct clone_args args = { CC check_prctl check_prctl.c: In function ‘set_tagged_addr_ctrl’: check_prctl.c:19:14: error: ‘PR_SET_TAGGED_ADDR_CTRL’ undeclared (first use in this function) 19 | ret = prctl(PR_SET_TAGGED_ADDR_CTRL, val, 0, 0, 0); gcc -mbranch-protection=standard -DBTI=1 -ffreestanding -Wall -Wextra -Wall -O2 -g -I/linux_mainline/tools/testing/selftests/ -I/linux_mainline/tools/include -c -o /bti/test-bti.o test.c test.c: In function ‘handler’: test.c:85:50: error: ‘PSR_BTYPE_MASK’ undeclared (first use in this function); did you mean ‘PSR_MODE_MASK’? 85 | write(1, &"00011011"[((uc->uc_mcontext.pstate & PSR_BTYPE_MASK) I've GCC 8 installed. I'm not expecting the errors because of a little older compiler. Any more ideas about the failures? -- BR, Muhammad Usama Anjum

1 year, 6 months

2
3
0 0

[PATCH v5 0/8] Support Zve32[xf] and Zve64[xfd] Vector subextensions

by Andy Chiu

The series composes of two parts. The first part Specifically, patch 1 adds a comment at a callsite of riscv_setup_vsize to clarify how vlenb is observed by the system. Patch 2 fixes the issue by failing the boot process of a secondary core if vlenb mismatches. Here is the organization of the series: - Patch 1, 2 provide a fix for mismatching vlen problem [1]. The solution is to fail secondary cores if their vlenb is not the same as the boot core. - Patch 3 is a cleanup for introducing ZVE* Vector subextensions. It gives the obsolete ISA parser the ability to expand ISA extensions for sigle letter extensions. - Patch 4, 5, 6 introduce Zve32x, Zve32f, Zve64x, Zve64f, Zve64d for isa parsing and hwprobe, and document about it. - Patch 7 makes has_vector() check against ZVE32X instead of V, so most userspace Vector supports will be available for bare ZVE32X. - Patch 8 updates the prctl test so that it runs on ZVE32X. The series is tested on a QEMU and verified that booting, Vector programs context-switch, signal, ptrace, prctl interfaces works when we only report partial V from the ISA. Note that the signal test was performed after applying the commit c27fa53b858b ("riscv: Fix vector state restore in rt_sigreturn()") This patch should be able to apply on risc-v for-next branch on top of the commit 0a16a1728790 ("riscv: select ARCH_HAS_FAST_MULTIPLIER") [1]: https://lore.kernel.org/all/20240228-vicinity-cornstalk-4b8eb5fe5730@spud/T… Changes in v5: - Rebase on top of for-next - Update comments (1, 7) - Reorder the documentation patch to the front of patches that it documents about. (5->4) - Include ZVE64D to the list, which single letter V implies (6) - Remove ZVE32F_IMPLY_LIST (5) - Change the semantic of has_vector() thus rewrite patch 7 - Remove the patch that fixes integer promotion as it is merged else place (8) - Link to v4: https://lore.kernel.org/r/20240412-zve-detection-v4-0-e0c45bb6b253@sifive.c… Changes in v4: - Add a patch to trigger prctl test on ZVE32X (9) - Add a patch to fix integer promotion bug in hwprobe (8) - Fix a build fail on !CONFIG_RISCV_ISA_V (7) - Add more comment in the assembly code change (2) - Link to v3: https://lore.kernel.org/r/20240318-zve-detection-v3-0-e12d42107fa8@sifive.c… Changelog v3: - Include correct maintainers and mailing list into CC. - Cleanup isa string parser code (3) - Adjust extensions order and name (4, 5) - Refine commit message (6) Changelog v2: - Update comments and commit messages (1, 2, 7) - Refine isa_exts[] lists for zve extensions (4) - Add a patch for dt-binding (5) - Make ZVE* extensions depend on has_vector(ZVE32X) (6, 7) --- --- Andy Chiu (8): riscv: vector: add a comment when calling riscv_setup_vsize() riscv: smp: fail booting up smp if inconsistent vlen is detected riscv: cpufeature: call match_isa_ext() for single-letter extensions dt-bindings: riscv: add Zve32[xf] Zve64[xfd] ISA extension description riscv: cpufeature: add zve32[xf] and zve64[xfd] isa detection riscv: hwprobe: add zve Vector subextensions into hwprobe interface riscv: vector: adjust minimum Vector requirement to ZVE32X selftest: run vector prctl test for ZVE32X Documentation/arch/riscv/hwprobe.rst | 15 ++++++ .../devicetree/bindings/riscv/extensions.yaml | 30 +++++++++++ arch/riscv/include/asm/hwcap.h | 5 ++ arch/riscv/include/asm/vector.h | 10 ++-- arch/riscv/include/uapi/asm/hwprobe.h | 5 ++ arch/riscv/kernel/cpufeature.c | 60 +++++++++++++++++++--- arch/riscv/kernel/head.S | 19 ++++--- arch/riscv/kernel/smpboot.c | 14 +++-- arch/riscv/kernel/sys_hwprobe.c | 11 +++- arch/riscv/kernel/vector.c | 5 +- arch/riscv/lib/uaccess.S | 2 +- .../testing/selftests/riscv/vector/vstate_prctl.c | 6 +-- 12 files changed, 151 insertions(+), 31 deletions(-) --- base-commit: 0a16a172879012c42f55ae8c2883e17c1e4e388f change-id: 20240318-zve-detection-50106d2da527 Best regards, -- Andy Chiu <andy.chiu(a)sifive.com>

1 year, 6 months

4
11
0 0

[PATCH net] selftests: hsr: add missing config for CONFIG_BRIDGE

by Hangbin Liu

hsr_redbox.sh test need to create bridge for testing. Add the missing config CONFIG_BRIDGE in config file. Fixes: eafbf0574e05 ("test: hsr: Extend the hsr_redbox.sh to have more SAN devices connected") Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- tools/testing/selftests/net/hsr/config | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/net/hsr/config b/tools/testing/selftests/net/hsr/config index 22061204fb69..241542441c51 100644 --- a/tools/testing/selftests/net/hsr/config +++ b/tools/testing/selftests/net/hsr/config @@ -2,3 +2,4 @@ CONFIG_IPV6=y CONFIG_NET_SCH_NETEM=m CONFIG_HSR=y CONFIG_VETH=y +CONFIG_BRIDGE=y -- 2.43.0

1 year, 6 months

3
2
0 0

[PATCH] selftests/timers: Guard LONG_MAX / LONG_MIN defines

by Edward Liaw

Add ifndef guards around LONG_MAX / LONG_MIN defines. When building with Android bionic, these macros are redefined because bionic's time.h will include linux/time.h, which includes limit.h. INFO: From Compiling common/tools/testing/selftests/timers/valid-adjtimex.c: common/tools/testing/selftests/timers/valid-adjtimex.c:107:9: warning: 'LONG_MAX' macro redefined [-Wmacro-redefined] 107 | #define LONG_MAX (~0UL>>1) | ^ prebuilts/clang/host/linux-x86/clang-r522817/lib/clang/18/include/limits.h:47:9: note: previous definition is here 47 | #define LONG_MAX __LONG_MAX__ | ^ common/tools/testing/selftests/timers/valid-adjtimex.c:108:9: warning: 'LONG_MIN' macro redefined [-Wmacro-redefined] 108 | #define LONG_MIN (-LONG_MAX - 1) | ^ prebuilts/clang/host/linux-x86/clang-r522817/lib/clang/18/include/limits.h:52:9: note: previous definition is here 52 | #define LONG_MIN (-__LONG_MAX__ -1L) | ^ Signed-off-by: Edward Liaw <edliaw(a)google.com> --- tools/testing/selftests/timers/valid-adjtimex.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c index d500884801d8..3d9f1baff86e 100644 --- a/tools/testing/selftests/timers/valid-adjtimex.c +++ b/tools/testing/selftests/timers/valid-adjtimex.c @@ -102,8 +102,12 @@ long outofrange_freq[NUM_FREQ_OUTOFRANGE] = { 1000 * SHIFTED_PPM, }; +#ifndef LONG_MAX #define LONG_MAX (~0UL>>1) +#endif +#ifndef LONG_MIN #define LONG_MIN (-LONG_MAX - 1) +#endif long invalid_freq[NUM_FREQ_INVALID] = { LONG_MAX, -- 2.45.1.288.g0e0cd299f1-goog

1 year, 6 months

2
1
0 0

[PATCH] KVM: selftest: Add family and model check for zen4 in PMU filter test

by Manali Shukla

PMU event filter test fails on zen4 architecture because of unavailability of family and model check for zen4 in use_amd_pmu(). So, add family and model check for zen4 architecture in use_amd_pmu(). Signed-off-by: Manali Shukla <manali.shukla(a)amd.com> --- .../testing/selftests/kvm/x86_64/pmu_event_filter_test.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/x86_64/pmu_event_filter_test.c b/tools/testing/selftests/kvm/x86_64/pmu_event_filter_test.c index 3c85d1ae9893..c212ca4ffa72 100644 --- a/tools/testing/selftests/kvm/x86_64/pmu_event_filter_test.c +++ b/tools/testing/selftests/kvm/x86_64/pmu_event_filter_test.c @@ -374,6 +374,12 @@ static bool is_zen3(uint32_t family, uint32_t model) return family == 0x19 && model <= 0x0f; } +static bool is_zen4(uint32_t family, uint32_t model) +{ + return family == 0x19 && ((model >= 0x10 && model <= 0x1f) || + (model >= 0xa0 && model <= 0xaf)); +} + /* * Determining AMD support for a PMU event requires consulting the AMD * PPR for the CPU or reference material derived therefrom. The AMD @@ -390,7 +396,8 @@ static bool use_amd_pmu(void) return host_cpu_is_amd && (is_zen1(family, model) || is_zen2(family, model) || - is_zen3(family, model)); + is_zen3(family, model) || + is_zen4(family, model)); } /* -- 2.34.1

1 year, 6 months

2
4
0 0

[PATCH v4 0/7] mm: multi-gen LRU: Walk secondary MMU page tables while aging

by James Houghton

This patchset makes it possible for MGLRU to consult secondary MMUs while doing aging, not just during eviction. This allows for more accurate reclaim decisions, which is especially important for proactive reclaim. This series makes the necessary MMU notifier changes to MGLRU and then includes optimizations on top of that. This series also now includes changes to access_tracking_perf_test to verify that aging works properly for pages that are mainly used by KVM. access_tracking_perf_test also has a mode (-p) to check performance of MGLRU aging while the VM is faulting memory in. Here are some results: Testing MGLRU aging while vCPUs are faulting in memory on x86 with the TDP MMU. THPs disabled. The test results varied a decent amount from run to run. I did my best to take representative averages, but nonetheless, the big picture is the important part. Main takeaways: - With the optimizations, the workload is much less impacted by the presence of aging. - With the optimizations, MGLRU is able to do aging much more quickly, especially at 8+ vCPUs on my machine. ./access_tracking_perf_test -p -l -b 1G -v $N_VCPUS # 1G per vCPU num_vcpus vcpu wall time aging avg pass time 1 (no aging) 0.878822016 n/a 1 (no opt) 0.938250568 0.008236007 1 (opt) 0.912270190 0.007314582 2 (no aging) 0.984959659 n/a 2 (no opt) 1.057880728 0.017989741 2 (opt) 1.037735641 0.013996319 4 (no aging) 1.264881581 n/a 4 (no opt) 1.318849182 0.056164918 4 (opt) 1.314653465 0.029311993 8 (no aging) 1.473883699 n/a 8 (no opt) 1.589441079 0.227419586s 8 (opt) 1.498439592 0.063857740s 16 (no aging) 2.048766096 n/a 16 (no opt) 2.399335597 1.247142841s 16 (opt) 2.000914001 0.121628689s 32 (no aging) 3.316256321 n/a 32 (no opt) 3.955417018 4.347290433 32 (opt) 3.355274507 0.250886289 64 (no aging) 6.498958516 n/a 64 (no opt) 7.127533884 9.815592054 64 (opt) 6.442582168 1.392907010 112 (no aging) 8.498029491 n/a 112 (no opt) 10.21372495 13.47381656 112 (opt) 8.896963554 2.292223850 Previous versions of this series included logic in MGLRU and KVM to support batching the updates to secondary page tables. This version removes this logic, as it was complex and not necessary to enable proactive reclaim. This optimization, as well as the additional optimizations for arm64 and powerpc, can be done in a later series. Changes since v3[1]: - Vastly simplified the series (thanks David). Removed mmu notifier batching logic entirely. - Cleaned up how locking is done for mmu_notifier_test/clear_young (thanks David). - Look-around is now only done when there are no secondary MMUs subscribed to MMU notifiers. - CONFIG_LRU_GEN_WALKS_SECONDARY_MMU has been added. - Fixed the lockless implementation of kvm_{test,}age_gfn for x86 (thanks David). - Added MGLRU functional and performance tests to access_tracking_perf_test (thanks Axel). - In v3, an mm would be completely ignored (for aging) if there was a secondary MMU but support for secondary MMU walking was missing. Now, missing secondary MMU walking support simply skips the notifier calls (except for eviction). - Added a sanity check for that range->lockless and range->on_lock are never both provided for the memslot walk. For the changes from v2[2] to v3, see v3[1]. This series applies cleanly to mm/mm-unstable and kvm/queue. [1]: https://lore.kernel.org/linux-mm/20240401232946.1837665-1-jthoughton@google… [2]: https://lore.kernel.org/kvmarm/20230526234435.662652-1-yuzhao@google.com/ James Houghton (7): mm/Kconfig: Add LRU_GEN_WALKS_SECONDARY_MMU mm: multi-gen LRU: Have secondary MMUs participate in aging KVM: Add lockless memslot walk to KVM KVM: Move MMU lock acquisition for test/clear_young to architecture KVM: x86: Relax locking for kvm_test_age_gfn and kvm_age_gfn KVM: arm64: Relax locking for kvm_test_age_gfn and kvm_age_gfn KVM: selftests: Add multi-gen LRU aging to access_tracking_perf_test Documentation/admin-guide/mm/multigen_lru.rst | 6 +- arch/arm64/kvm/hyp/pgtable.c | 9 +- arch/arm64/kvm/mmu.c | 30 +- arch/loongarch/kvm/mmu.c | 20 +- arch/mips/kvm/mmu.c | 21 +- arch/powerpc/kvm/book3s.c | 14 +- arch/riscv/kvm/mmu.c | 26 +- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/mmu/mmu.c | 10 +- arch/x86/kvm/mmu/tdp_iter.h | 27 +- arch/x86/kvm/mmu/tdp_mmu.c | 67 ++- include/linux/kvm_host.h | 1 + include/linux/mmzone.h | 6 +- mm/Kconfig | 8 + mm/rmap.c | 9 +- mm/vmscan.c | 144 +++++-- tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/access_tracking_perf_test.c | 365 ++++++++++++++-- .../selftests/kvm/include/lru_gen_util.h | 55 +++ .../testing/selftests/kvm/lib/lru_gen_util.c | 391 ++++++++++++++++++ virt/kvm/kvm_main.c | 38 +- 21 files changed, 1104 insertions(+), 145 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/lru_gen_util.h create mode 100644 tools/testing/selftests/kvm/lib/lru_gen_util.c base-commit: e0cce98fe279b64f4a7d81b7f5c3a23d80b92fbc -- 2.45.1.288.g0e0cd299f1-goog

1 year, 6 months

5
34
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror