- Linux-kselftest-mirror - lists.linaro.org

[PATCH bpf-next 1/2] bpf: add btf_task_get_cgroup_id kfunc

by Jose Fernandez

This patch enhances the BPF helpers by adding a kfunc to retrieve the cgroup v2 ID of a specific task, addressing a previous limitation where only bpf_task_get_cgroup1 was available for cgroup v1. The new kfunc is particularly useful for scenarios where obtaining the cgroup ID of a task other than the "current" one is necessary, which the existing bpf_get_current_cgroup_id helper cannot accommodate. A specific use case at Netflix involved the sched_switch tracepoint, where we had to get the cgroup IDs of both the previous and next tasks. The bpf_task_get_cgroup_id kfunc returns a task's cgroup ID, correctly implementing RCU read locking and unlocking for safe data access, and leverages existing cgroup.h helpers to fetch the cgroup and its ID. Signed-off-by: Jose Fernandez <josef(a)netflix.com> Reviewed-by: Tycho Andersen <tycho(a)tycho.pizza> --- kernel/bpf/helpers.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c index a89587859571..8038b2bd3488 100644 --- a/kernel/bpf/helpers.c +++ b/kernel/bpf/helpers.c @@ -2266,6 +2266,27 @@ bpf_task_get_cgroup1(struct task_struct *task, int hierarchy_id) return NULL; return cgrp; } + +/** + * bpf_task_get_cgroup_id - Get the cgroup ID of a task. + * @task: The target task + * + * This function returns the ID of the task's default cgroup, primarily + * designed for use with cgroup v2. In cgroup v1, the concept of default + * cgroup varies by subsystem, and while this function will work with + * cgroup v1, it's recommended to use bpf_task_get_cgroup1 instead. + */ +__bpf_kfunc u64 bpf_task_get_cgroup_id(struct task_struct *task) +{ + struct cgroup *cgrp; + u64 cgrp_id; + + rcu_read_lock(); + cgrp = task_dfl_cgroup(task); + cgrp_id = cgroup_id(cgrp); + rcu_read_unlock(); + return cgrp_id; +} #endif /* CONFIG_CGROUPS */ /** @@ -2573,6 +2594,7 @@ BTF_ID_FLAGS(func, bpf_cgroup_ancestor, KF_ACQUIRE | KF_RCU | KF_RET_NULL) BTF_ID_FLAGS(func, bpf_cgroup_from_id, KF_ACQUIRE | KF_RET_NULL) BTF_ID_FLAGS(func, bpf_task_under_cgroup, KF_RCU) BTF_ID_FLAGS(func, bpf_task_get_cgroup1, KF_ACQUIRE | KF_RCU | KF_RET_NULL) +BTF_ID_FLAGS(func, bpf_task_get_cgroup_id, KF_RCU) #endif BTF_ID_FLAGS(func, bpf_task_from_pid, KF_ACQUIRE | KF_RET_NULL) BTF_ID_FLAGS(func, bpf_throw) -- 2.40.1

1 year, 7 months

2
3
0 0

[PATCH][next] selftests/bpf: Remove second semicolon

by Colin Ian King

There are statements with two semicolons. Remove the second one, it is redundant. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/bpf/benchs/bench_local_storage_create.c | 2 +- tools/testing/selftests/bpf/progs/iters.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/benchs/bench_local_storage_create.c b/tools/testing/selftests/bpf/benchs/bench_local_storage_create.c index b36de42ee4d9..e2ff8ea1cb79 100644 --- a/tools/testing/selftests/bpf/benchs/bench_local_storage_create.c +++ b/tools/testing/selftests/bpf/benchs/bench_local_storage_create.c @@ -186,7 +186,7 @@ static void *task_producer(void *input) for (i = 0; i < batch_sz; i++) { if (!pthd_results[i]) - pthread_join(pthds[i], NULL);; + pthread_join(pthds[i], NULL); } } diff --git a/tools/testing/selftests/bpf/progs/iters.c b/tools/testing/selftests/bpf/progs/iters.c index 3db416606f2f..fe65e0952a1e 100644 --- a/tools/testing/selftests/bpf/progs/iters.c +++ b/tools/testing/selftests/bpf/progs/iters.c @@ -673,7 +673,7 @@ static __noinline void fill(struct bpf_iter_num *it, int *arr, __u32 n, int mul) static __noinline int sum(struct bpf_iter_num *it, int *arr, __u32 n) { - int *t, i, sum = 0;; + int *t, i, sum = 0; while ((t = bpf_iter_num_next(it))) { i = *t; -- 2.39.2

1 year, 7 months

2
1
0 0

Re: [RFC PATCH v5 27/29] KVM: selftests: Propagate KVM_EXIT_MEMORY_FAULT to userspace

by Chen, Zide

On 12/12/2023 12:47 PM, Shashar, Sagi wrote: > > > -----Original Message----- > From: Sagi Shahar <sagis(a)google.com> > Sent: Tuesday, December 12, 2023 12:47 PM > To: linux-kselftest(a)vger.kernel.org; Ackerley Tng <ackerleytng(a)google.com>; Afranji, Ryan <afranji(a)google.com>; Aktas, Erdem <erdemaktas(a)google.com>; Sagi Shahar <sagis(a)google.com>; Yamahata, Isaku <isaku.yamahata(a)intel.com> > Cc: Sean Christopherson <seanjc(a)google.com>; Paolo Bonzini <pbonzini(a)redhat.com>; Shuah Khan <shuah(a)kernel.org>; Peter Gonda <pgonda(a)google.com>; Xu, Haibo1 <haibo1.xu(a)intel.com>; Chao Peng <chao.p.peng(a)linux.intel.com>; Annapurve, Vishal <vannapurve(a)google.com>; Roger Wang <runanwang(a)google.com>; Vipin Sharma <vipinsh(a)google.com>; jmattson(a)google.com; dmatlack(a)google.com; linux-kernel(a)vger.kernel.org; kvm(a)vger.kernel.org; linux-mm(a)kvack.org > Subject: [RFC PATCH v5 27/29] KVM: selftests: Propagate KVM_EXIT_MEMORY_FAULT to userspace > > Allow userspace to handle KVM_EXIT_MEMORY_FAULT instead of triggering TEST_ASSERT. > > From the KVM_EXIT_MEMORY_FAULT documentation: > Note! KVM_EXIT_MEMORY_FAULT is unique among all KVM exit reasons in that it accompanies a return code of '-1', not '0'! errno will always be set to EFAULT or EHWPOISON when KVM exits with KVM_EXIT_MEMORY_FAULT, userspace should assume kvm_run.exit_reason is stale/undefined for all other error numbers. If KVM exits to userspace with KVM_EXIT_MEMORY_FAULT, most likely it's because the guest attempts to access the gfn in a way that is different from what the KVM is configured, in terms of private/shared property. I'd suggest to drop this patch and work on the selftests code to eliminate this exit. If we need a testcase to catch this exit intentionally, we may call _vcpu_run() directly from the testcase and keep the common API vcpu_run() intact. > > Signed-off-by: Sagi Shahar <sagis(a)google.com> > --- > tools/testing/selftests/kvm/lib/kvm_util.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/tools/testing/selftests/kvm/lib/kvm_util.c b/tools/testing/selftests/kvm/lib/kvm_util.c > index d024abc5379c..8fb041e51484 100644 > --- a/tools/testing/selftests/kvm/lib/kvm_util.c > +++ b/tools/testing/selftests/kvm/lib/kvm_util.c > @@ -1742,6 +1742,10 @@ void vcpu_run(struct kvm_vcpu *vcpu) { > int ret = _vcpu_run(vcpu); > > + // Allow this scenario to be handled by the caller. > + if (ret == -1 && errno == EFAULT) > + return; > + > TEST_ASSERT(!ret, KVM_IOCTL_ERROR(KVM_RUN, ret)); } > > -- > 2.43.0.472.g3155946c3a-goog >

1 year, 7 months

1
0
0 0

[PATCH v8 00/38] arm64/gcs: Provide support for GCS in userspace

by Mark Brown

The arm64 Guarded Control Stack (GCS) feature provides support for hardware protected stacks of return addresses, intended to provide hardening against return oriented programming (ROP) attacks and to make it easier to gather call stacks for applications such as profiling. When GCS is active a secondary stack called the Guarded Control Stack is maintained, protected with a memory attribute which means that it can only be written with specific GCS operations. The current GCS pointer can not be directly written to by userspace. When a BL is executed the value stored in LR is also pushed onto the GCS, and when a RET is executed the top of the GCS is popped and compared to LR with a fault being raised if the values do not match. GCS operations may only be performed on GCS pages, a data abort is generated if they are not. The combination of hardware enforcement and lack of extra instructions in the function entry and exit paths should result in something which has less overhead and is more difficult to attack than a purely software implementation like clang's shadow stacks. This series implements support for use of GCS by userspace, along with support for use of GCS within KVM guests. It does not enable use of GCS by either EL1 or EL2, this will be implemented separately. Executables are started without GCS and must use a prctl() to enable it, it is expected that this will be done very early in application execution by the dynamic linker or other startup code. For dynamic linking this will be done by checking that everything in the executable is marked as GCS compatible. x86 has an equivalent feature called shadow stacks, this series depends on the x86 patches for generic memory management support for the new guarded/shadow stack page type and shares APIs as much as possible. As there has been extensive discussion with the wider community around the ABI for shadow stacks I have as far as practical kept implementation decisions close to those for x86, anticipating that review would lead to similar conclusions in the absence of strong reasoning for divergence. The main divergence I am concious of is that x86 allows shadow stack to be enabled and disabled repeatedly, freeing the shadow stack for the thread whenever disabled, while this implementation keeps the GCS allocated after disable but refuses to reenable it. This is to avoid races with things actively walking the GCS during a disable, we do anticipate that some systems will wish to disable GCS at runtime but are not aware of any demand for subsequently reenabling it. x86 uses an arch_prctl() to manage enable and disable, since only x86 and S/390 use arch_prctl() a generic prctl() was proposed[1] as part of a patch set for the equivalent RISC-V Zicfiss feature which I initially adopted fairly directly but following review feedback has been revised quite a bit. We currently maintain the x86 pattern of implicitly allocating a shadow stack for threads started with shadow stack enabled, there has been some discussion of removing this support and requiring the use of clone3() with explicit allocation of shadow stacks instead. I have no strong feelings either way, implicit allocation is not really consistent with anything else we do and creates the potential for errors around thread exit but on the other hand it is existing ABI on x86 and minimises the changes needed in userspace code. There is an open issue with support for CRIU, on x86 this required the ability to set the GCS mode via ptrace. This series supports configuring mode bits other than enable/disable via ptrace but it needs to be confirmed if this is sufficient. The series depends on support for shadow stacks in clone3(), that series includes the addition of ARCH_HAS_USER_SHADOW_STACK. https://lore.kernel.org/r/20231120-clone3-shadow-stack-v3-0-a7b8ed3e2acc@ke… It also depends on the addition of more waitpid() flags to nolibc: https://lore.kernel.org/r/20231023-nolibc-waitpid-flags-v2-1-b09d096f091f@k… You can see a branch with the full set of dependencies against Linus' tree at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git arm64-gcs [1] https://lore.kernel.org/lkml/20230213045351.3945824-1-debug@rivosinc.com/ Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v8: - Invalidate signal cap token on stack when consuming. - Typo and other trivial fixes. - Don't try to use process_vm_write() on GCS, it intentionally does not work. - Fix leak of thread GCSs. - Rebase onto latest clone3() series. - Link to v7: https://lore.kernel.org/r/20231122-arm64-gcs-v7-0-201c483bd775@kernel.org Changes in v7: - Rebase onto v6.7-rc2 via the clone3() patch series. - Change the token used to cap the stack during signal handling to be compatible with GCSPOPM. - Fix flags for new page types. - Fold in support for clone3(). - Replace copy_to_user_gcs() with put_user_gcs(). - Link to v6: https://lore.kernel.org/r/20231009-arm64-gcs-v6-0-78e55deaa4dd@kernel.org Changes in v6: - Rebase onto v6.6-rc3. - Add some more gcsb_dsync() barriers following spec clarifications. - Due to ongoing discussion around clone()/clone3() I've not updated anything there, the behaviour is the same as on previous versions. - Link to v5: https://lore.kernel.org/r/20230822-arm64-gcs-v5-0-9ef181dd6324@kernel.org Changes in v5: - Don't map any permissions for user GCSs, we always use EL0 accessors or use a separate mapping of the page. - Reduce the standard size of the GCS to RLIMIT_STACK/2. - Enforce a PAGE_SIZE alignment requirement on map_shadow_stack(). - Clarifications and fixes to documentation. - More tests. - Link to v4: https://lore.kernel.org/r/20230807-arm64-gcs-v4-0-68cfa37f9069@kernel.org Changes in v4: - Implement flags for map_shadow_stack() allowing the cap and end of stack marker to be enabled independently or not at all. - Relax size and alignment requirements for map_shadow_stack(). - Add more blurb explaining the advantages of hardware enforcement. - Link to v3: https://lore.kernel.org/r/20230731-arm64-gcs-v3-0-cddf9f980d98@kernel.org Changes in v3: - Rebase onto v6.5-rc4. - Add a GCS barrier on context switch. - Add a GCS stress test. - Link to v2: https://lore.kernel.org/r/20230724-arm64-gcs-v2-0-dc2c1d44c2eb@kernel.org Changes in v2: - Rebase onto v6.5-rc3. - Rework prctl() interface to allow each bit to be locked independently. - map_shadow_stack() now places the cap token based on the size requested by the caller not the actual space allocated. - Mode changes other than enable via ptrace are now supported. - Expand test coverage. - Various smaller fixes and adjustments. - Link to v1: https://lore.kernel.org/r/20230716-arm64-gcs-v1-0-bf567f93bba6@kernel.org --- Mark Brown (38): arm64/mm: Restructure arch_validate_flags() for extensibility prctl: arch-agnostic prctl for shadow stack mman: Add map_shadow_stack() flags arm64: Document boot requirements for Guarded Control Stacks arm64/gcs: Document the ABI for Guarded Control Stacks arm64/sysreg: Add definitions for architected GCS caps arm64/gcs: Add manual encodings of GCS instructions arm64/gcs: Provide put_user_gcs() arm64/cpufeature: Runtime detection of Guarded Control Stack (GCS) arm64/mm: Allocate PIE slots for EL0 guarded control stack mm: Define VM_SHADOW_STACK for arm64 when we support GCS arm64/mm: Map pages for guarded control stack KVM: arm64: Manage GCS registers for guests arm64/gcs: Allow GCS usage at EL0 and EL1 arm64/idreg: Add overrride for GCS arm64/hwcap: Add hwcap for GCS arm64/traps: Handle GCS exceptions arm64/mm: Handle GCS data aborts arm64/gcs: Context switch GCS state for EL0 arm64/gcs: Ensure that new threads have a GCS arm64/gcs: Implement shadow stack prctl() interface arm64/mm: Implement map_shadow_stack() arm64/signal: Set up and restore the GCS context for signal handlers arm64/signal: Expose GCS state in signal frames arm64/ptrace: Expose GCS via ptrace and core files arm64: Add Kconfig for Guarded Control Stack (GCS) kselftest/arm64: Verify the GCS hwcap kselftest/arm64: Add GCS as a detected feature in the signal tests kselftest/arm64: Add framework support for GCS to signal handling tests kselftest/arm64: Allow signals tests to specify an expected si_code kselftest/arm64: Always run signals tests with GCS enabled kselftest/arm64: Add very basic GCS test program kselftest/arm64: Add a GCS test program built with the system libc kselftest/arm64: Add test coverage for GCS mode locking selftests/arm64: Add GCS signal tests kselftest/arm64: Add a GCS stress test kselftest/arm64: Enable GCS for the FP stress tests kselftest: Provide shadow stack enable helpers for arm64 Documentation/admin-guide/kernel-parameters.txt | 6 + Documentation/arch/arm64/booting.rst | 22 + Documentation/arch/arm64/elf_hwcaps.rst | 3 + Documentation/arch/arm64/gcs.rst | 233 +++++++ Documentation/arch/arm64/index.rst | 1 + Documentation/filesystems/proc.rst | 2 +- arch/arm64/Kconfig | 20 + arch/arm64/include/asm/cpufeature.h | 6 + arch/arm64/include/asm/el2_setup.h | 17 + arch/arm64/include/asm/esr.h | 28 +- arch/arm64/include/asm/exception.h | 2 + arch/arm64/include/asm/gcs.h | 107 +++ arch/arm64/include/asm/hwcap.h | 1 + arch/arm64/include/asm/kvm_arm.h | 4 +- arch/arm64/include/asm/kvm_host.h | 12 + arch/arm64/include/asm/mman.h | 23 +- arch/arm64/include/asm/pgtable-prot.h | 14 +- arch/arm64/include/asm/processor.h | 7 + arch/arm64/include/asm/sysreg.h | 20 + arch/arm64/include/asm/uaccess.h | 40 ++ arch/arm64/include/uapi/asm/hwcap.h | 1 + arch/arm64/include/uapi/asm/ptrace.h | 8 + arch/arm64/include/uapi/asm/sigcontext.h | 9 + arch/arm64/kernel/cpufeature.c | 19 + arch/arm64/kernel/cpuinfo.c | 1 + arch/arm64/kernel/entry-common.c | 23 + arch/arm64/kernel/idreg-override.c | 2 + arch/arm64/kernel/process.c | 85 +++ arch/arm64/kernel/ptrace.c | 59 ++ arch/arm64/kernel/signal.c | 242 ++++++- arch/arm64/kernel/traps.c | 11 + arch/arm64/kvm/emulate-nested.c | 4 + arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 17 + arch/arm64/kvm/sys_regs.c | 22 + arch/arm64/mm/Makefile | 1 + arch/arm64/mm/fault.c | 79 ++- arch/arm64/mm/gcs.c | 300 +++++++++ arch/arm64/mm/mmap.c | 13 +- arch/arm64/tools/cpucaps | 1 + arch/x86/include/uapi/asm/mman.h | 3 - fs/proc/task_mmu.c | 3 + include/linux/mm.h | 16 +- include/uapi/asm-generic/mman.h | 4 + include/uapi/linux/elf.h | 1 + include/uapi/linux/prctl.h | 22 + kernel/sys.c | 30 + tools/testing/selftests/arm64/Makefile | 2 +- tools/testing/selftests/arm64/abi/hwcap.c | 19 + tools/testing/selftests/arm64/fp/assembler.h | 15 + tools/testing/selftests/arm64/fp/fpsimd-test.S | 2 + tools/testing/selftests/arm64/fp/sve-test.S | 2 + tools/testing/selftests/arm64/fp/za-test.S | 2 + tools/testing/selftests/arm64/fp/zt-test.S | 2 + tools/testing/selftests/arm64/gcs/.gitignore | 5 + tools/testing/selftests/arm64/gcs/Makefile | 24 + tools/testing/selftests/arm64/gcs/asm-offsets.h | 0 tools/testing/selftests/arm64/gcs/basic-gcs.c | 428 ++++++++++++ tools/testing/selftests/arm64/gcs/gcs-locking.c | 200 ++++++ .../selftests/arm64/gcs/gcs-stress-thread.S | 311 +++++++++ tools/testing/selftests/arm64/gcs/gcs-stress.c | 532 +++++++++++++++ tools/testing/selftests/arm64/gcs/gcs-util.h | 100 +++ tools/testing/selftests/arm64/gcs/libc-gcs.c | 736 +++++++++++++++++++++ tools/testing/selftests/arm64/signal/.gitignore | 1 + .../testing/selftests/arm64/signal/test_signals.c | 17 +- .../testing/selftests/arm64/signal/test_signals.h | 6 + .../selftests/arm64/signal/test_signals_utils.c | 32 +- .../selftests/arm64/signal/test_signals_utils.h | 39 ++ .../arm64/signal/testcases/gcs_exception_fault.c | 62 ++ .../selftests/arm64/signal/testcases/gcs_frame.c | 88 +++ .../arm64/signal/testcases/gcs_write_fault.c | 67 ++ .../selftests/arm64/signal/testcases/testcases.c | 7 + .../selftests/arm64/signal/testcases/testcases.h | 1 + tools/testing/selftests/ksft_shstk.h | 37 ++ 73 files changed, 4241 insertions(+), 40 deletions(-) --- base-commit: 50abefbf1bc07f5c4e403fd28f71dcee855100f7 change-id: 20230303-arm64-gcs-e311ab0d8729 Best regards, -- Mark Brown <broonie(a)kernel.org>

1 year, 7 months

9
89
0 0

[PATCH v2 00/12] conform tests to TAP format output

by Muhammad Usama Anjum

Changes since v1: - Rebased the series on top of next-20240202 Muhammad Usama Anjum (12): selftests/mm: map_fixed_noreplace: conform test to TAP format output selftests/mm: map_hugetlb: conform test to TAP format output selftests/mm: map_populate: conform test to TAP format output selftests/mm: mlock-random-test: conform test to TAP format output selftests/mm: mlock2-tests: conform test to TAP format output selftests/mm: mrelease_test: conform test to TAP format output selftests/mm: mremap_dontunmap: conform test to TAP format output selftests/mm: split_huge_page_test: conform test to TAP format output selftests/mm: thp_settings: conform to TAP format output selftests/mm: thuge-gen: conform to TAP format output selftests/mm: transhuge-stress: conform to TAP format output selftests/mm: virtual_address_range: conform to TAP format output tools/testing/selftests/mm/khugepaged.c | 3 +- .../selftests/mm/map_fixed_noreplace.c | 96 ++---- tools/testing/selftests/mm/map_hugetlb.c | 42 ++- tools/testing/selftests/mm/map_populate.c | 37 ++- .../testing/selftests/mm/mlock-random-test.c | 136 ++++----- tools/testing/selftests/mm/mlock2-tests.c | 282 +++++++----------- tools/testing/selftests/mm/mlock2.h | 11 +- tools/testing/selftests/mm/mrelease_test.c | 80 ++--- tools/testing/selftests/mm/mremap_dontunmap.c | 32 +- .../selftests/mm/split_huge_page_test.c | 161 +++++----- tools/testing/selftests/mm/thp_settings.c | 123 +++----- tools/testing/selftests/mm/thp_settings.h | 4 +- tools/testing/selftests/mm/thuge-gen.c | 147 ++++----- tools/testing/selftests/mm/transhuge-stress.c | 36 ++- .../selftests/mm/virtual_address_range.c | 44 +-- tools/testing/selftests/mm/vm_util.c | 6 +- 16 files changed, 537 insertions(+), 703 deletions(-) -- 2.42.0

1 year, 7 months

3
19
0 0

[PATCH v3 0/5] selftests/mm: Improve run_vmtests.sh

by Muhammad Usama Anjum

In this series, I'm trying to add 3 missing tests to vm_runtests.sh which is used to run all the tests in mm suite. These tests weren't running by CIs. While enabling them and through review feedback, I've fixed some problems in tests as well. I've found more flakiness in more tests which I'll be fixing with future patches. hugetlb-read-hwpoison test is being added where it can only run with newly added "-d" (destructive) flag only. Not sure why it is failing again. So once it become stable, we can think of moving it to default set of tests if it doesn't have any side-effect to them. Cc: Ryan Roberts <ryan.roberts(a)arm.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> --- Changes in v3: - Add cover letter - Fix flakiness in tests found during enablement - Move additional tests down in the file - Add "-d" option which poisons the pages and aren't being useable after the test v2: https://lore.kernel.org/all/20240123073615.920324-1-usama.anjum@collabora.c… Muhammad Usama Anjum (5): selftests/mm: hugetlb_reparenting_test: do not unmount selftests/mm: run_vmtests: remove sudo and conform to tap selftests/mm: save and restore nr_hugepages value selftests/mm: protection_keys: save/restore nr_hugepages settings selftests/mm: run_vmtests.sh: add missing tests tools/testing/selftests/mm/Makefile | 5 +++ .../selftests/mm/charge_reserved_hugetlb.sh | 4 +++ .../selftests/mm/hugetlb_reparenting_test.sh | 9 +++-- tools/testing/selftests/mm/on-fault-limit.c | 36 +++++++++---------- tools/testing/selftests/mm/protection_keys.c | 34 ++++++++++++++++++ tools/testing/selftests/mm/run_vmtests.sh | 10 +++++- 6 files changed, 76 insertions(+), 22 deletions(-) -- 2.42.0

1 year, 7 months

3
13
0 0

[Test Failure Report] exec: Test failures in execveat

by Muhammad Usama Anjum

Hello, I've been running execveat (execveat.c) locally on v6.1 and next-20240228. It has flaky test case. There are some test cases which fail consistently. The comment (not very clear) on top of failing cases is as following: /* * Execute as a long pathname relative to "/". If this is a script, * the interpreter will launch but fail to open the script because its * name ("/dev/fd/5/xxx....") is bigger than PATH_MAX. * * The failure code is usually 127 (POSIX: "If a command is not found, * the exit status shall be 127."), but some systems give 126 (POSIX: * "If the command name is found, but it is not an executable utility, * the exit status shall be 126."), so allow either. */ The file name is just less than PATH_MAX (4096) and we are expecting the execveat() to fail with particular 99 or 127/128 error code. But kernel is returning 1 error code. Snippet from full output: # child 3493092 exited with 1 not 99 nor 99 # child 3493094 exited with 1 not 127 nor 126 I'm not sure if test is wrong or the kernel has changed the return error codes. Full test run output: ./execveat TAP version 13 1..51 ok 1 Check success of execveat(3, '../execveat', 0)... ok 2 Check success of execveat(5, 'execveat', 0)... ok 3 Check success of execveat(7, 'execveat', 0)... ok 4 Check success of execveat(-100, '/home/usama/repos/ke...ftests/exec/execveat', 0)... ok 5 Check success of execveat(99, '/home/usama/repos/ke...ftests/exec/execveat', 0)... ok 6 Check success of execveat(9, '', 4096)... ok 7 Check success of execveat(18, '', 4096)... ok 8 Check success of execveat(10, '', 4096)... ok 9 Check success of execveat(15, '', 4096)... ok 10 Check success of execveat(15, '', 4096)... ok 11 Check success of execveat(16, '', 4096)... ok 12 Check failure of execveat(9, '', 0) with ENOENT ok 13 Check failure of execveat(9, '(null)', 4096) with EFAULT ok 14 Check success of execveat(5, 'execveat.symlink', 0)... ok 15 Check success of execveat(7, 'execveat.symlink', 0)... ok 16 Check success of execveat(-100, '/home/usama/repos/ke...xec/execveat.symlink', 0)... ok 17 Check success of execveat(11, '', 4096)... ok 18 Check success of execveat(11, '', 4352)... ok 19 Check failure of execveat(5, 'execveat.symlink', 256) with ELOOP ok 20 Check failure of execveat(7, 'execveat.symlink', 256) with ELOOP ok 21 Check failure of execveat(-100, '/home/usama/repos/kernel/linux_mainline/tools/testing/selftests/exec/execveat.symlink', 256) with ELOOP ok 22 Check failure of execveat(5, 'pipe', 0) with EACCES ok 23 Check success of execveat(3, '../script', 0)... ok 24 Check success of execveat(5, 'script', 0)... ok 25 Check success of execveat(7, 'script', 0)... ok 26 Check success of execveat(-100, '/home/usama/repos/ke...elftests/exec/script', 0)... ok 27 Check success of execveat(14, '', 4096)... ok 28 Check success of execveat(14, '', 4352)... ok 29 Check failure of execveat(19, '', 4096) with ENOENT ok 30 Check failure of execveat(8, 'script', 0) with ENOENT ok 31 Check success of execveat(17, '', 4096)... ok 32 Check success of execveat(17, '', 4096)... ok 33 Check success of execveat(4, '../script', 0)... ok 34 Check success of execveat(4, 'script', 0)... ok 35 Check success of execveat(4, '../script', 0)... ok 36 Check failure of execveat(4, 'script', 0) with ENOENT ok 37 Check failure of execveat(5, 'execveat', 65535) with EINVAL ok 38 Check failure of execveat(5, 'no-such-file', 0) with ENOENT ok 39 Check failure of execveat(7, 'no-such-file', 0) with ENOENT ok 40 Check failure of execveat(-100, 'no-such-file', 0) with ENOENT ok 41 Check failure of execveat(5, '', 4096) with EACCES ok 42 Check failure of execveat(5, 'Makefile', 0) with EACCES ok 43 Check failure of execveat(12, '', 4096) with EACCES ok 44 Check failure of execveat(13, '', 4096) with EACCES ok 45 Check failure of execveat(99, '', 4096) with EBADF ok 46 Check failure of execveat(99, 'execveat', 0) with EBADF ok 47 Check failure of execveat(9, 'execveat', 0) with ENOTDIR # Invoke copy of 'execveat' via filename of length 4094: ok 48 Check success of execveat(20, '', 4096)... # execveat() failed, rc=-1 errno=2 (No such file or directory) not ok 49 Check success of execveat(6, 'home/usama/repos/ker...yyyyyyyyyyyyyyyyyyyy', 0)... # child 3493092 exited with 1 not 99 nor 99 not ok 49 Check success of execveat(6, 'home/usama/repos/ker...yyyyyyyyyyyyyyyyyyyy', 0)... # Invoke copy of 'script' via filename of length 4094: ok 50 Check success of execveat(21, '', 4096)... # execveat() failed, rc=-1 errno=2 (No such file or directory) not ok 51 Check success of execveat(6, 'home/usama/repos/ker...yyyyyyyyyyyyyyyyyyyy', 0)... # child 3493094 exited with 1 not 127 nor 126 not ok 51 Check success of execveat(6, 'home/usama/repos/ker...yyyyyyyyyyyyyyyyyyyy', 0)... 2 tests failed # Totals: pass:49 fail:2 xfail:0 xpass:0 skip:0 error:0 -- BR, Muhammad Usama Anjum

1 year, 7 months

2
7
0 0

[PATCH v7 0/4] KVM: selftests: Add LoongArch support

by Bibo Mao

This patchset adds KVM selftests for LoongArch system, currently only some common test cases are supported and pass to run. These testcase are listed as following: demand_paging_test dirty_log_perf_test dirty_log_test guest_print_test hardware_disable_test kvm_binary_stats_test kvm_create_max_vcpus kvm_page_table_test memslot_modification_stress_test memslot_perf_test set_memory_region_test This patchset originally is posted from zhaotianrui, I continue to work on his efforts. --- Changes in v7: 1. Refine code to add LoongArch support in test case set_memory_region_test. Changes in v6: 1. Refresh the patch based on latest kernel 6.8-rc1, add LoongArch support about testcase set_memory_region_test. 2. Add hardware_disable_test test case. 3. Drop modification about macro DEFAULT_GUEST_TEST_MEM, it is problem of LoongArch binutils, this issue is raised to LoongArch binutils owners. Changes in v5: 1. In LoongArch kvm self tests, the DEFAULT_GUEST_TEST_MEM could be 0x130000000, it is different from the default value in memstress.h. So we Move the definition of DEFAULT_GUEST_TEST_MEM into LoongArch ucall.h, and add 'ifndef' condition for DEFAULT_GUEST_TEST_MEM in memstress.h. Changes in v4: 1. Remove the based-on flag, as the LoongArch KVM patch series have been accepted by Linux kernel, so this can be applied directly in kernel. Changes in v3: 1. Improve implementation of LoongArch VM page walk. 2. Add exception handler for LoongArch. 3. Add dirty_log_test, dirty_log_perf_test, guest_print_test test cases for LoongArch. 4. Add __ASSEMBLER__ macro to distinguish asm file and c file. 5. Move ucall_arch_do_ucall to the header file and make it as static inline to avoid function calls. 6. Change the DEFAULT_GUEST_TEST_MEM base addr for LoongArch. Changes in v2: 1. We should use ".balign 4096" to align the assemble code with 4K in exception.S instead of "align 12". 2. LoongArch only supports 3 or 4 levels page tables, so we remove the hanlders for 2-levels page table. 3. Remove the DEFAULT_LOONGARCH_GUEST_STACK_VADDR_MIN and use the common DEFAULT_GUEST_STACK_VADDR_MIN to allocate stack memory in guest. 4. Reorganize the test cases supported by LoongArch. 5. Fix some code comments. 6. Add kvm_binary_stats_test test case into LoongArch KVM selftests. --- Tianrui Zhao (4): KVM: selftests: Add KVM selftests header files for LoongArch KVM: selftests: Add core KVM selftests support for LoongArch KVM: selftests: Add ucall test support for LoongArch KVM: selftests: Add test cases for LoongArch tools/testing/selftests/kvm/Makefile | 16 + .../selftests/kvm/include/kvm_util_base.h | 5 + .../kvm/include/loongarch/processor.h | 133 +++++++ .../selftests/kvm/include/loongarch/ucall.h | 20 ++ .../selftests/kvm/lib/loongarch/exception.S | 59 ++++ .../selftests/kvm/lib/loongarch/processor.c | 332 ++++++++++++++++++ .../selftests/kvm/lib/loongarch/ucall.c | 38 ++ .../selftests/kvm/set_memory_region_test.c | 2 +- 8 files changed, 604 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/kvm/include/loongarch/processor.h create mode 100644 tools/testing/selftests/kvm/include/loongarch/ucall.h create mode 100644 tools/testing/selftests/kvm/lib/loongarch/exception.S create mode 100644 tools/testing/selftests/kvm/lib/loongarch/processor.c create mode 100644 tools/testing/selftests/kvm/lib/loongarch/ucall.c base-commit: 6764c317b6bb91bd806ef79adf6d9c0e428b191e -- 2.39.3

1 year, 7 months

2
6
0 0

[PATCH] tools/testing/selftests/bpf/test_tc_tunnel.sh: Prevent client connect before server bind

by Alessandro Carminati (Red Hat)

In some systems, the netcat server can incur in delay to start listening. When this happens, the test can randomly fail in various points. This is an example error message: # ip gre none gso # encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000 # test basic connectivity # Ncat: Connection refused. Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati(a)gmail.com> --- tools/testing/selftests/bpf/test_tc_tunnel.sh | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/test_tc_tunnel.sh b/tools/testing/selftests/bpf/test_tc_tunnel.sh index 910044f08908..01c0f4b1a8c2 100755 --- a/tools/testing/selftests/bpf/test_tc_tunnel.sh +++ b/tools/testing/selftests/bpf/test_tc_tunnel.sh @@ -72,7 +72,6 @@ cleanup() { server_listen() { ip netns exec "${ns2}" nc "${netcat_opt}" -l "${port}" > "${outfile}" & server_pid=$! - sleep 0.2 } client_connect() { @@ -93,6 +92,22 @@ verify_data() { fi } +wait_for_port() { + local digits=8 + local port2check=$(printf ":%04X" $1) + local prot=$([ "$2" == "-6" ] && echo 6 && digits=32) + + for i in $(seq 20); do + if ip netns exec "${ns2}" cat /proc/net/tcp${prot} | \ + sed -r 's/^[ \t]+[0-9]+: ([0-9A-F]{'${digits}'}:[0-9A-F]{4}) .*$/\1/' | \ + grep -q "${port2check}"; then + return 0 + fi + sleep 0.1 + done + return 1 +} + set -e # no arguments: automated test, run all @@ -193,6 +208,7 @@ setup # basic communication works echo "test basic connectivity" server_listen +wait_for_port ${port} ${netcat_opt} client_connect verify_data @@ -204,6 +220,7 @@ ip netns exec "${ns1}" tc filter add dev veth1 egress \ section "encap_${tuntype}_${mac}" echo "test bpf encap without decap (expect failure)" server_listen +wait_for_port ${port} ${netcat_opt} ! client_connect if [[ "$tuntype" =~ "udp" ]]; then -- 2.34.1

1 year, 7 months

3
3
0 0

[PATCH 1/3] selftests/exec: Add the overall result line accourding to TAP

by Muhammad Usama Anjum

The following line is missing from the test's execution. Add it to make it fully TAP conformant: # Totals: pass:27 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/exec/binfmt_script.py | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/exec/binfmt_script.py b/tools/testing/selftests/exec/binfmt_script.py index 05f94a741c7aa..2c575a2c0eab4 100755 --- a/tools/testing/selftests/exec/binfmt_script.py +++ b/tools/testing/selftests/exec/binfmt_script.py @@ -16,6 +16,8 @@ SIZE=256 NAME_MAX=int(subprocess.check_output(["getconf", "NAME_MAX", "."])) test_num=0 +pass_num=0 +fail_num=0 code='''#!/usr/bin/perl print "Executed interpreter! Args:\n"; @@ -42,7 +44,7 @@ foreach my $a (@ARGV) { # ... def test(name, size, good=True, leading="", root="./", target="/perl", fill="A", arg="", newline="\n", hashbang="#!"): - global test_num, tests, NAME_MAX + global test_num, pass_num, fail_num, tests, NAME_MAX test_num += 1 if test_num > tests: raise ValueError("more binfmt_script tests than expected! (want %d, expected %d)" @@ -80,16 +82,20 @@ def test(name, size, good=True, leading="", root="./", target="/perl", if good: print("ok %d - binfmt_script %s (successful good exec)" % (test_num, name)) + pass_num += 1 else: print("not ok %d - binfmt_script %s succeeded when it should have failed" % (test_num, name)) + fail_num = 1 else: if good: print("not ok %d - binfmt_script %s failed when it should have succeeded (rc:%d)" % (test_num, name, proc.returncode)) + fail_num = 1 else: print("ok %d - binfmt_script %s (correctly failed bad exec)" % (test_num, name)) + pass_num += 1 # Clean up crazy binaries os.unlink(script) @@ -166,6 +172,8 @@ test(name="two-under-trunc-arg", size=int(SIZE/2), arg=" ") test(name="two-under-leading", size=int(SIZE/2), leading=" ") test(name="two-under-lead-trunc-arg", size=int(SIZE/2), leading=" ", arg=" ") +print("# Totals: pass:%d fail:%d xfail:0 xpass:0 skip:0 error:0" % (pass_num, fail_num)) + if test_num != tests: raise ValueError("fewer binfmt_script tests than expected! (ran %d, expected %d" % (test_num, tests)) -- 2.39.2

1 year, 7 months

2
7
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror