- Linux-kselftest-mirror - lists.linaro.org

[PATCH][v3] hung_task: Panic after fixed number of hung tasks

by lirongqing

From: Li RongQing <lirongqing(a)baidu.com> Currently, when 'hung_task_panic' is enabled, the kernel panics immediately upon detecting the first hung task. However, some hung tasks are transient and the system can recover, while others are persistent and may accumulate progressively. This patch extends the 'hung_task_panic' sysctl to allow specifying the number of hung tasks that must be detected before triggering a kernel panic. This provides finer control for environments where transient hangs may occur but persistent hangs should still be fatal. The sysctl can be set to: - 0: disabled (never panic) - 1: original behavior (panic on first hung task) - N: panic when N hung tasks are detected This maintains backward compatibility while providing more flexibility for handling different hang scenarios. Signed-off-by: Li RongQing <lirongqing(a)baidu.com> --- Diff with v2: not add new sysctl, extend hung_task_panic Documentation/admin-guide/kernel-parameters.txt | 20 +++++++++++++------- Documentation/admin-guide/sysctl/kernel.rst | 3 ++- arch/arm/configs/aspeed_g5_defconfig | 2 +- kernel/configs/debug.config | 2 +- kernel/hung_task.c | 16 +++++++++++----- lib/Kconfig.debug | 10 ++++++---- tools/testing/selftests/wireguard/qemu/kernel.config | 2 +- 7 files changed, 35 insertions(+), 20 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index a51ab46..7d9a8ee 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1992,14 +1992,20 @@ the added memory block itself do not be affected. hung_task_panic= - [KNL] Should the hung task detector generate panics. - Format: 0 | 1 + [KNL] Number of hung tasks to trigger kernel panic. + Format: <int> + + Set this to the number of hung tasks that must be + detected before triggering a kernel panic. + + 0: don't panic + 1: panic immediately on first hung task + N: panic after N hung tasks are detect - A value of 1 instructs the kernel to panic when a - hung task is detected. The default value is controlled - by the CONFIG_BOOTPARAM_HUNG_TASK_PANIC build-time - option. The value selected by this boot parameter can - be changed later by the kernel.hung_task_panic sysctl. + The default value is controlled by the + CONFIG_BOOTPARAM_HUNG_TASK_PANIC build-time option. The value + selected by this boot parameter can be changed later by the + kernel.hung_task_panic sysctl. hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC) terminal devices. Valid values: 0..8 diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index f3ee807..0a8dfab 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -397,7 +397,8 @@ a hung task is detected. hung_task_panic =============== -Controls the kernel's behavior when a hung task is detected. +When set to a non-zero value, a kernel panic will be triggered if the +number of detected hung tasks reaches this value This file shows up if ``CONFIG_DETECT_HUNG_TASK`` is enabled. = ================================================= diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 61cee1e..c3b0d5f 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -308,7 +308,7 @@ CONFIG_PANIC_ON_OOPS=y CONFIG_PANIC_TIMEOUT=-1 CONFIG_SOFTLOCKUP_DETECTOR=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y -CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y +CONFIG_BOOTPARAM_HUNG_TASK_PANIC=1 CONFIG_WQ_WATCHDOG=y # CONFIG_SCHED_DEBUG is not set CONFIG_FUNCTION_TRACER=y diff --git a/kernel/configs/debug.config b/kernel/configs/debug.config index e81327d..9f6ab7d 100644 --- a/kernel/configs/debug.config +++ b/kernel/configs/debug.config @@ -83,7 +83,7 @@ CONFIG_SLUB_DEBUG_ON=y # # Debug Oops, Lockups and Hangs # -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC=0 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_DEBUG_ATOMIC_SLEEP=y CONFIG_DETECT_HUNG_TASK=y diff --git a/kernel/hung_task.c b/kernel/hung_task.c index b2c1f14..3929ed9 100644 --- a/kernel/hung_task.c +++ b/kernel/hung_task.c @@ -81,7 +81,7 @@ static unsigned int __read_mostly sysctl_hung_task_all_cpu_backtrace; * hung task is detected: */ static unsigned int __read_mostly sysctl_hung_task_panic = - IS_ENABLED(CONFIG_BOOTPARAM_HUNG_TASK_PANIC); + CONFIG_BOOTPARAM_HUNG_TASK_PANIC; static int hung_task_panic(struct notifier_block *this, unsigned long event, void *ptr) @@ -218,8 +218,11 @@ static inline void debug_show_blocker(struct task_struct *task, unsigned long ti } #endif -static void check_hung_task(struct task_struct *t, unsigned long timeout) +static void check_hung_task(struct task_struct *t, unsigned long timeout, + unsigned long prev_detect_count) { + unsigned long total_hung_task; + if (!task_is_hung(t, timeout)) return; @@ -229,9 +232,11 @@ static void check_hung_task(struct task_struct *t, unsigned long timeout) */ sysctl_hung_task_detect_count++; + total_hung_task = sysctl_hung_task_detect_count - prev_detect_count; trace_sched_process_hang(t); - if (sysctl_hung_task_panic) { + if (sysctl_hung_task_panic && + (total_hung_task >= sysctl_hung_task_panic)) { console_verbose(); hung_task_show_lock = true; hung_task_call_panic = true; @@ -300,6 +305,7 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout) int max_count = sysctl_hung_task_check_count; unsigned long last_break = jiffies; struct task_struct *g, *t; + unsigned long prev_detect_count = sysctl_hung_task_detect_count; /* * If the system crashed already then all bets are off, @@ -320,7 +326,7 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout) last_break = jiffies; } - check_hung_task(t, timeout); + check_hung_task(t, timeout, prev_detect_count); } unlock: rcu_read_unlock(); @@ -389,7 +395,7 @@ static const struct ctl_table hung_task_sysctls[] = { .mode = 0644, .proc_handler = proc_dointvec_minmax, .extra1 = SYSCTL_ZERO, - .extra2 = SYSCTL_ONE, + .extra2 = SYSCTL_INT_MAX, }, { .procname = "hung_task_check_count", diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 3034e294..077b9e4 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -1258,12 +1258,14 @@ config DEFAULT_HUNG_TASK_TIMEOUT Keeping the default should be fine in most cases. config BOOTPARAM_HUNG_TASK_PANIC - bool "Panic (Reboot) On Hung Tasks" + int "Number of hung tasks to trigger kernel panic" depends on DETECT_HUNG_TASK + default 0 help - Say Y here to enable the kernel to panic on "hung tasks", - which are bugs that cause the kernel to leave a task stuck - in uninterruptible "D" state. + The number of hung tasks must be detected to trigger kernel panic. + + - 0: Don't trigger panic + - N: Panic when N hung tasks are detected The panic can be used in combination with panic_timeout, to cause the system to reboot automatically after a diff --git a/tools/testing/selftests/wireguard/qemu/kernel.config b/tools/testing/selftests/wireguard/qemu/kernel.config index 936b18b..0504c11 100644 --- a/tools/testing/selftests/wireguard/qemu/kernel.config +++ b/tools/testing/selftests/wireguard/qemu/kernel.config @@ -81,7 +81,7 @@ CONFIG_WQ_WATCHDOG=y CONFIG_DETECT_HUNG_TASK=y CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y -CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y +CONFIG_BOOTPARAM_HUNG_TASK_PANIC=1 CONFIG_PANIC_TIMEOUT=-1 CONFIG_STACKTRACE=y CONFIG_EARLY_PRINTK=y -- 2.9.4

2 months, 1 week

6
11
0 0

[PATCH] Add a new test 'migrate.cow_after_fork' that verifies correct RMAP handling of Copy-On-Write pages after fork(). Before a write, parent and child share the same PFN; after a write, the child’s PFN differs, confirming proper COW duplication.

by Itamar-Dalal

Signed-off-by: Itamar-Dalal <dalalitamar(a)gmail.com> --- tools/testing/selftests/mm/rmap.c | 45 ++++++++++++++++++++++++++++++- 1 file changed, 44 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/rmap.c b/tools/testing/selftests/mm/rmap.c index 13f7bccfd0a9..2ba3361fecf0 100644 --- a/tools/testing/selftests/mm/rmap.c +++ b/tools/testing/selftests/mm/rmap.c @@ -430,4 +430,47 @@ TEST_F(migrate, ksm) propagate_children(_metadata, data); } -TEST_HARNESS_MAIN +TEST_F(migrate, cow_after_fork) +{ + struct global_data *data = &self->data; + int status; + pid_t pid; + unsigned long parent_pfn, child_pfn; + int pagemap_fd; + char *region; + + /* Map private anonymous memory and fault it in */ + region = mmap(NULL, data->mapsize, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + ASSERT_NE(region, MAP_FAILED); + memset(region, 0xaa, data->mapsize); + + pagemap_fd = open("/proc/self/pagemap", O_RDONLY); + ASSERT_NE(pagemap_fd, -1); + parent_pfn = pagemap_get_pfn(pagemap_fd, region); + close(pagemap_fd); + + pid = fork(); + ASSERT_NE(pid, -1); + + if (pid == 0) { + /* Child: write to trigger COW */ + region[0] = 0xbb; + + pagemap_fd = open("/proc/self/pagemap", O_RDONLY); + ASSERT_NE(pagemap_fd, -1); + child_pfn = pagemap_get_pfn(pagemap_fd, region); + close(pagemap_fd); + + /* Expect PFN to differ after write (COW happened) */ + if (child_pfn == parent_pfn) + _exit(FAIL_ON_CHECK); + _exit(0); + } + + waitpid(pid, &status, 0); + ASSERT_EQ(WEXITSTATUS(status), 0); + munmap(region, data->mapsize); +} + +TEST_HARNESS_MAIN \ No newline at end of file -- 2.34.1

2 months, 1 week

2
1
0 0

[PATCH] selftests/dma: add dma_map_benchmark to .gitignore

by Kriish Sharma

Add the dma_map_benchmark binary to .gitignore to prevent it from being shown as an untracked file after building the selftests. Signed-off-by: Kriish Sharma <kriish.sharma2006(a)gmail.com> --- tools/testing/selftests/dma/.gitignore | 2 ++ 1 file changed, 2 insertions(+) create mode 100644 tools/testing/selftests/dma/.gitignore diff --git a/tools/testing/selftests/dma/.gitignore b/tools/testing/selftests/dma/.gitignore new file mode 100644 index 000000000000..b4b99b6ffea3 --- /dev/null +++ b/tools/testing/selftests/dma/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +dma_map_benchmark -- 2.34.1

2 months, 1 week

1
0
0 0

[PATCH v2] selftests/run_kselftest.sh: exit with error if tests fail

by Brendan Jackman

Parsing KTAP is quite an inconvenience, but most of the time the thing you really want to know is "did anything fail"? Let's give the user the his information without them needing to parse anything. Because of the use of subshells and namespaces, this needs to be communicated via a file. Just write arbitrary data into the file and treat non-empty content as a signal that something failed. In case any user depends on the current behaviour, such as running this from a script with `set -e` and parsing the result for failures afterwards, add a flag they can set to get the old behaviour, namely --no-error-on-fail. Signed-off-by: Brendan Jackman <jackmanb(a)google.com> --- Changes in v2: - Fixed bug in report_failure() - Made error-on-fail the default - Link to v1: https://lore.kernel.org/r/20251007-b4-ksft-error-on-fail-v1-1-71bf058f5662@… --- tools/testing/selftests/kselftest/runner.sh | 14 ++++++++++---- tools/testing/selftests/run_kselftest.sh | 14 ++++++++++++++ 2 files changed, 24 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh index 2c3c58e65a419f5ee8d7dc51a37671237a07fa0b..3a62039fa6217f3453423ff011575d0a1eb8c275 100644 --- a/tools/testing/selftests/kselftest/runner.sh +++ b/tools/testing/selftests/kselftest/runner.sh @@ -44,6 +44,12 @@ tap_timeout() fi } +report_failure() +{ + echo "not ok $*" + echo "$*" >> "$kselftest_failures_file" +} + run_one() { DIR="$1" @@ -105,7 +111,7 @@ run_one() echo "# $TEST_HDR_MSG" if [ ! -e "$TEST" ]; then echo "# Warning: file $TEST is missing!" - echo "not ok $test_num $TEST_HDR_MSG" + report_failure "$test_num $TEST_HDR_MSG" else if [ -x /usr/bin/stdbuf ]; then stdbuf="/usr/bin/stdbuf --output=L " @@ -123,7 +129,7 @@ run_one() interpreter=$(head -n 1 "$TEST" | cut -c 3-) cmd="$stdbuf $interpreter ./$BASENAME_TEST" else - echo "not ok $test_num $TEST_HDR_MSG" + report_failure "$test_num $TEST_HDR_MSG" return fi fi @@ -137,9 +143,9 @@ run_one() echo "ok $test_num $TEST_HDR_MSG # SKIP" elif [ $rc -eq $timeout_rc ]; then \ echo "#" - echo "not ok $test_num $TEST_HDR_MSG # TIMEOUT $kselftest_timeout seconds" + report_failure "$test_num $TEST_HDR_MSG # TIMEOUT $kselftest_timeout seconds" else - echo "not ok $test_num $TEST_HDR_MSG # exit=$rc" + report_failure "$test_num $TEST_HDR_MSG # exit=$rc" fi) cd - >/dev/null fi diff --git a/tools/testing/selftests/run_kselftest.sh b/tools/testing/selftests/run_kselftest.sh index 0443beacf3621ae36cb12ffd57f696ddef3526b5..cc1b4190edacedadafd9b993a351e4cfbf17ccd5 100755 --- a/tools/testing/selftests/run_kselftest.sh +++ b/tools/testing/selftests/run_kselftest.sh @@ -33,6 +33,7 @@ Usage: $0 [OPTIONS] -c | --collection COLLECTION Run all tests from COLLECTION -l | --list List the available collection:test entries -d | --dry-run Don't actually run any tests + -f | --no-error-on-fail Don't exit with an error just because tests failed -n | --netns Run each test in namespace -h | --help Show this usage info -o | --override-timeout Number of seconds after which we timeout @@ -44,6 +45,7 @@ COLLECTIONS="" TESTS="" dryrun="" kselftest_override_timeout="" +ERROR_ON_FAIL=true while true; do case "$1" in -s | --summary) @@ -65,6 +67,9 @@ while true; do -d | --dry-run) dryrun="echo" shift ;; + -f | --no-error-on-fail) + ERROR_ON_FAIL=false + shift ;; -n | --netns) RUN_IN_NETNS=1 shift ;; @@ -105,9 +110,18 @@ if [ -n "$TESTS" ]; then available="$(echo "$valid" | sed -e 's/ /\n/g')" fi +kselftest_failures_file=$(mktemp --tmpdir kselftest-failures-XXXXXX) +export kselftest_failures_file + collections=$(echo "$available" | cut -d: -f1 | sort | uniq) for collection in $collections ; do [ -w /dev/kmsg ] && echo "kselftest: Running tests in $collection" >> /dev/kmsg tests=$(echo "$available" | grep "^$collection:" | cut -d: -f2) ($dryrun cd "$collection" && $dryrun run_many $tests) done + +failures="$(cat "$kselftest_failures_file")" +rm "$kselftest_failures_file" +if "$ERROR_ON_FAIL" && [ "$failures" ]; then + exit 1 +fi --- base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585 change-id: 20251007-b4-ksft-error-on-fail-0c2cb3246041 Best regards, -- Brendan Jackman <jackmanb(a)google.com>

2 months, 1 week

1
1
0 0

[PATCH bpf-next v2 0/3] Add overwrite mode for bpf ring buffer

by Xu Kuohai

When the bpf ring buffer is full, new events can not be recorded util the consumer consumes some events to free space. This may cause critical events to be discarded, such as in fault diagnostic, where recent events are more critical than older ones. So add ovewrite mode for bpf ring buffer. In this mode, the new event overwrites the oldest event when the buffer is full. v2: - remove libbpf changes (Andrii) - update overwrite benchmark v1: https://lore.kernel.org/bpf/20250804022101.2171981-1-xukuohai@huaweicloud.c… Xu Kuohai (3): bpf: Add overwrite mode for bpf ring buffer selftests/bpf: Add test for overwrite ring buffer selftests/bpf/benchs: Add producer and overwrite bench for ring buffer include/uapi/linux/bpf.h | 4 + kernel/bpf/ringbuf.c | 159 +++++++++++++++--- tools/include/uapi/linux/bpf.h | 4 + tools/testing/selftests/bpf/Makefile | 3 +- tools/testing/selftests/bpf/bench.c | 2 + .../selftests/bpf/benchs/bench_ringbufs.c | 95 ++++++++++- .../bpf/benchs/run_bench_ringbufs.sh | 4 + .../selftests/bpf/prog_tests/ringbuf.c | 74 ++++++++ .../selftests/bpf/progs/ringbuf_bench.c | 10 ++ .../bpf/progs/test_ringbuf_overwrite.c | 98 +++++++++++ 10 files changed, 418 insertions(+), 35 deletions(-) create mode 100644 tools/testing/selftests/bpf/progs/test_ringbuf_overwrite.c -- 2.43.0

2 months, 1 week

2
15
0 0

[PATCH net repost] selftests: net: check jq command is supported

by Wang Liang

The jq command is used in vlan_bridge_binding.sh, if it is not supported, the test will spam the following log. # ./vlan_bridge_binding.sh: line 51: jq: command not found # ./vlan_bridge_binding.sh: line 51: jq: command not found # ./vlan_bridge_binding.sh: line 51: jq: command not found # ./vlan_bridge_binding.sh: line 51: jq: command not found # ./vlan_bridge_binding.sh: line 51: jq: command not found # TEST: Test bridge_binding on->off when lower down [FAIL] # Got operstate of , expected 0 The rtnetlink.sh has the same problem. It makes sense to check if jq is installed before running these tests. After this patch, the vlan_bridge_binding.sh skipped if jq is not supported: # timeout set to 3600 # selftests: net: vlan_bridge_binding.sh # TEST: jq not installed [SKIP] Fixes: dca12e9ab760 ("selftests: net: Add a VLAN bridge binding selftest") Fixes: 6a414fd77f61 ("selftests: rtnetlink: Add an address proto test") Signed-off-by: Wang Liang <wangliang74(a)huawei.com> Reviewed-by: Hangbin Liu <liuhangbin(a)gmail.com> --- tools/testing/selftests/net/rtnetlink.sh | 2 ++ tools/testing/selftests/net/vlan_bridge_binding.sh | 2 ++ 2 files changed, 4 insertions(+) diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh index dbf77513f617..163a084d525d 100755 --- a/tools/testing/selftests/net/rtnetlink.sh +++ b/tools/testing/selftests/net/rtnetlink.sh @@ -1466,6 +1466,8 @@ usage: ${0##*/} OPTS EOF } +require_command jq + #check for needed privileges if [ "$(id -u)" -ne 0 ];then end_test "SKIP: Need root privileges" diff --git a/tools/testing/selftests/net/vlan_bridge_binding.sh b/tools/testing/selftests/net/vlan_bridge_binding.sh index db481af9b6b3..e8c02c64e03a 100755 --- a/tools/testing/selftests/net/vlan_bridge_binding.sh +++ b/tools/testing/selftests/net/vlan_bridge_binding.sh @@ -249,6 +249,8 @@ test_binding_toggle_off_when_upper_down() do_test_binding_off : "on->off when upper down" } +require_command jq + trap defer_scopes_cleanup EXIT setup_prepare tests_run -- 2.34.1

2 months, 1 week

2
1
0 0

[PATCH net-next v5 1/2] net/tls: support setting the maximum payload size

by Wilfred Mallawa

From: Wilfred Mallawa <wilfred.mallawa(a)wdc.com> During a handshake, an endpoint may specify a maximum record size limit. Currently, the kernel defaults to TLS_MAX_PAYLOAD_SIZE (16KB) for the maximum record size. Meaning that, the outgoing records from the kernel can exceed a lower size negotiated during the handshake. In such a case, the TLS endpoint must send a fatal "record_overflow" alert [1], and thus the record is discarded. Upcoming Western Digital NVMe-TCP hardware controllers implement TLS support. For these devices, supporting TLS record size negotiation is necessary because the maximum TLS record size supported by the controller is less than the default 16KB currently used by the kernel. Currently, there is no way to inform the kernel of such a limit. This patch adds support to a new setsockopt() option `TLS_TX_MAX_PAYLOAD_LEN` that allows for setting the maximum plaintext fragment size. Once set, outgoing records are no larger than the size specified. This option can be used to specify the record size limit. [1] https://www.rfc-editor.org/rfc/rfc8449 Signed-off-by: Wilfred Mallawa <wilfred.mallawa(a)wdc.com> --- Changes V4 -> V5 - Change the socket option to TLS_TX_MAX_PAYLOAD_LEN, such that we can limit the payload length in a generic way, as pposed to strictly specifying record size limit. No functional changes other than removing TLS 1.3 content byte length checks for this argument. - Lock the socket when calling do_tls_setsockopt_tx_payload_len() V4: https://lore.kernel.org/netdev/20250923053207.113938-1-wilfred.opensource@g… --- Documentation/networking/tls.rst | 11 ++++++ include/net/tls.h | 3 ++ include/uapi/linux/tls.h | 2 ++ net/tls/tls_device.c | 2 +- net/tls/tls_main.c | 62 ++++++++++++++++++++++++++++++++ net/tls/tls_sw.c | 2 +- 6 files changed, 80 insertions(+), 2 deletions(-) diff --git a/Documentation/networking/tls.rst b/Documentation/networking/tls.rst index 36cc7afc2527..dabab17ab84a 100644 --- a/Documentation/networking/tls.rst +++ b/Documentation/networking/tls.rst @@ -280,6 +280,17 @@ If the record decrypted turns out to had been padded or is not a data record it will be decrypted again into a kernel buffer without zero copy. Such events are counted in the ``TlsDecryptRetry`` statistic. +TLS_TX_MAX_PAYLOAD_LEN +~~~~~~~~~~~~~~~~~~~~~~ + +Sets the maximum size for the plaintext of a protected record. + +When this option is set, the kernel enforces this limit on all transmitted TLS +records, ensuring no plaintext fragment exceeds the specified size. This can be +used to specify the TLS Record Size Limit [1]. + +[1] https://datatracker.ietf.org/doc/html/rfc8449 + Statistics ========== diff --git a/include/net/tls.h b/include/net/tls.h index 857340338b69..f2af113728aa 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -53,6 +53,8 @@ struct tls_rec; /* Maximum data size carried in a TLS record */ #define TLS_MAX_PAYLOAD_SIZE ((size_t)1 << 14) +/* Minimum record size limit as per RFC8449 */ +#define TLS_MIN_RECORD_SIZE_LIM ((size_t)1 << 6) #define TLS_HEADER_SIZE 5 #define TLS_NONCE_OFFSET TLS_HEADER_SIZE @@ -226,6 +228,7 @@ struct tls_context { u8 rx_conf:3; u8 zerocopy_sendfile:1; u8 rx_no_pad:1; + u16 tx_max_payload_len; int (*push_pending_record)(struct sock *sk, int flags); void (*sk_write_space)(struct sock *sk); diff --git a/include/uapi/linux/tls.h b/include/uapi/linux/tls.h index b66a800389cc..b8b9c42f848c 100644 --- a/include/uapi/linux/tls.h +++ b/include/uapi/linux/tls.h @@ -41,6 +41,7 @@ #define TLS_RX 2 /* Set receive parameters */ #define TLS_TX_ZEROCOPY_RO 3 /* TX zerocopy (only sendfile now) */ #define TLS_RX_EXPECT_NO_PAD 4 /* Attempt opportunistic zero-copy */ +#define TLS_TX_MAX_PAYLOAD_LEN 5 /* Maximum plaintext size */ /* Supported versions */ #define TLS_VERSION_MINOR(ver) ((ver) & 0xFF) @@ -194,6 +195,7 @@ enum { TLS_INFO_RXCONF, TLS_INFO_ZC_RO_TX, TLS_INFO_RX_NO_PAD, + TLS_INFO_TX_MAX_PAYLOAD_LEN, __TLS_INFO_MAX, }; #define TLS_INFO_MAX (__TLS_INFO_MAX - 1) diff --git a/net/tls/tls_device.c b/net/tls/tls_device.c index a64ae15b1a60..c6289c73cffc 100644 --- a/net/tls/tls_device.c +++ b/net/tls/tls_device.c @@ -461,7 +461,7 @@ static int tls_push_data(struct sock *sk, /* TLS_HEADER_SIZE is not counted as part of the TLS record, and * we need to leave room for an authentication tag. */ - max_open_record_len = TLS_MAX_PAYLOAD_SIZE + + max_open_record_len = tls_ctx->tx_max_payload_len + prot->prepend_size; do { rc = tls_do_allocation(sk, ctx, pfrag, prot->prepend_size); diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index a3ccb3135e51..b481d1add14e 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -544,6 +544,28 @@ static int do_tls_getsockopt_no_pad(struct sock *sk, char __user *optval, return 0; } +static int do_tls_getsockopt_tx_payload_len(struct sock *sk, char __user *optval, + int __user *optlen) +{ + struct tls_context *ctx = tls_get_ctx(sk); + u16 payload_len = ctx->tx_max_payload_len; + int len; + + if (get_user(len, optlen)) + return -EFAULT; + + if (len < sizeof(payload_len)) + return -EINVAL; + + if (put_user(sizeof(payload_len), optlen)) + return -EFAULT; + + if (copy_to_user(optval, &payload_len, sizeof(payload_len))) + return -EFAULT; + + return 0; +} + static int do_tls_getsockopt(struct sock *sk, int optname, char __user *optval, int __user *optlen) { @@ -563,6 +585,9 @@ static int do_tls_getsockopt(struct sock *sk, int optname, case TLS_RX_EXPECT_NO_PAD: rc = do_tls_getsockopt_no_pad(sk, optval, optlen); break; + case TLS_TX_MAX_PAYLOAD_LEN: + rc = do_tls_getsockopt_tx_payload_len(sk, optval, optlen); + break; default: rc = -ENOPROTOOPT; break; @@ -812,6 +837,30 @@ static int do_tls_setsockopt_no_pad(struct sock *sk, sockptr_t optval, return rc; } +static int do_tls_setsockopt_tx_payload_len(struct sock *sk, sockptr_t optval, + unsigned int optlen) +{ + struct tls_context *ctx = tls_get_ctx(sk); + struct tls_sw_context_tx *sw_ctx = tls_sw_ctx_tx(ctx); + u16 value; + + if (sw_ctx->open_rec) + return -EBUSY; + + if (sockptr_is_null(optval) || optlen != sizeof(value)) + return -EINVAL; + + if (copy_from_sockptr(&value, optval, sizeof(value))) + return -EFAULT; + + if (value < TLS_MIN_RECORD_SIZE_LIM || value > TLS_MAX_PAYLOAD_SIZE) + return -EINVAL; + + ctx->tx_max_payload_len = value; + + return 0; +} + static int do_tls_setsockopt(struct sock *sk, int optname, sockptr_t optval, unsigned int optlen) { @@ -833,6 +882,11 @@ static int do_tls_setsockopt(struct sock *sk, int optname, sockptr_t optval, case TLS_RX_EXPECT_NO_PAD: rc = do_tls_setsockopt_no_pad(sk, optval, optlen); break; + case TLS_TX_MAX_PAYLOAD_LEN: + lock_sock(sk); + rc = do_tls_setsockopt_tx_payload_len(sk, optval, optlen); + release_sock(sk); + break; default: rc = -ENOPROTOOPT; break; @@ -1022,6 +1076,7 @@ static int tls_init(struct sock *sk) ctx->tx_conf = TLS_BASE; ctx->rx_conf = TLS_BASE; + ctx->tx_max_payload_len = TLS_MAX_PAYLOAD_SIZE; update_sk_prot(sk, ctx); out: write_unlock_bh(&sk->sk_callback_lock); @@ -1111,6 +1166,12 @@ static int tls_get_info(struct sock *sk, struct sk_buff *skb, bool net_admin) goto nla_failure; } + err = nla_put_u16(skb, TLS_INFO_TX_MAX_PAYLOAD_LEN, + ctx->tx_max_payload_len); + + if (err) + goto nla_failure; + rcu_read_unlock(); nla_nest_end(skb, start); return 0; @@ -1132,6 +1193,7 @@ static size_t tls_get_info_size(const struct sock *sk, bool net_admin) nla_total_size(sizeof(u16)) + /* TLS_INFO_TXCONF */ nla_total_size(0) + /* TLS_INFO_ZC_RO_TX */ nla_total_size(0) + /* TLS_INFO_RX_NO_PAD */ + nla_total_size(sizeof(u16)) + /* TLS_INFO_TX_MAX_PAYLOAD_LEN */ 0; return size; diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index daac9fd4be7e..e76ea38b712a 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -1079,7 +1079,7 @@ static int tls_sw_sendmsg_locked(struct sock *sk, struct msghdr *msg, orig_size = msg_pl->sg.size; full_record = false; try_to_copy = msg_data_left(msg); - record_room = TLS_MAX_PAYLOAD_SIZE - msg_pl->sg.size; + record_room = tls_ctx->tx_max_payload_len - msg_pl->sg.size; if (try_to_copy >= record_room) { try_to_copy = record_room; full_record = true; -- 2.51.0

2 months, 1 week

3
3
0 0

[PATCH v2] vdso: Remove struct getcpu_cache

by Thomas Weißschuh

The cache parameter of getcpu() is not used by the kernel and no user ever passes it in anyways. Remove the struct and its header. As a side-effect we get rid of an unwanted inclusion of the linux/ header namespace from vDSO code. Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- Changes in v2: - Rebase on v6.18-rc1 - Link to v1: https://lore.kernel.org/r/20250826-getcpu_cache-v1-1-8748318f6141@linutroni… --- We could also completely remove the parameter, but I am not sure if that is a good idea for syscalls and vDSO entrypoints. --- arch/loongarch/vdso/vgetcpu.c | 5 ++--- arch/s390/kernel/vdso64/getcpu.c | 3 +-- arch/s390/kernel/vdso64/vdso.h | 4 +--- arch/x86/entry/vdso/vgetcpu.c | 5 ++--- arch/x86/include/asm/vdso/processor.h | 4 +--- arch/x86/um/vdso/um_vdso.c | 7 +++---- include/linux/getcpu.h | 19 ------------------- include/linux/syscalls.h | 3 +-- kernel/sys.c | 4 +--- tools/testing/selftests/vDSO/vdso_test_getcpu.c | 4 +--- 10 files changed, 13 insertions(+), 45 deletions(-) diff --git a/arch/loongarch/vdso/vgetcpu.c b/arch/loongarch/vdso/vgetcpu.c index 5301cd9d0f839eb0fd7b73a1d36e80aaa75d5e76..aefba899873ed035d70766a95b0b6fea881e94df 100644 --- a/arch/loongarch/vdso/vgetcpu.c +++ b/arch/loongarch/vdso/vgetcpu.c @@ -4,7 +4,6 @@ */ #include <asm/vdso.h> -#include <linux/getcpu.h> static __always_inline int read_cpu_id(void) { @@ -20,8 +19,8 @@ static __always_inline int read_cpu_id(void) } extern -int __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused); -int __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused) +int __vdso_getcpu(unsigned int *cpu, unsigned int *node, void *unused); +int __vdso_getcpu(unsigned int *cpu, unsigned int *node, void *unused) { int cpu_id; diff --git a/arch/s390/kernel/vdso64/getcpu.c b/arch/s390/kernel/vdso64/getcpu.c index 5c5d4a848b7669436e73df8e3b711e5b876eb3db..1e17665616c5fa766ca66c8de276b212528934bd 100644 --- a/arch/s390/kernel/vdso64/getcpu.c +++ b/arch/s390/kernel/vdso64/getcpu.c @@ -2,11 +2,10 @@ /* Copyright IBM Corp. 2020 */ #include <linux/compiler.h> -#include <linux/getcpu.h> #include <asm/timex.h> #include "vdso.h" -int __s390_vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused) +int __s390_vdso_getcpu(unsigned *cpu, unsigned *node, void *unused) { union tod_clock clk; diff --git a/arch/s390/kernel/vdso64/vdso.h b/arch/s390/kernel/vdso64/vdso.h index 9e5397e7b590a23c149ccc6043d0c0b0d5ea8457..cadd307d7a365cabf53f5c8d313be3718625533d 100644 --- a/arch/s390/kernel/vdso64/vdso.h +++ b/arch/s390/kernel/vdso64/vdso.h @@ -4,9 +4,7 @@ #include <vdso/datapage.h> -struct getcpu_cache; - -int __s390_vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused); +int __s390_vdso_getcpu(unsigned *cpu, unsigned *node, void *unused); int __s390_vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz); int __s390_vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts); int __s390_vdso_clock_getres(clockid_t clock, struct __kernel_timespec *ts); diff --git a/arch/x86/entry/vdso/vgetcpu.c b/arch/x86/entry/vdso/vgetcpu.c index e4640306b2e3c95d74d73037ab6b09294b8e1d6c..6381b472b7c52487bccf3cbf0664c3d7a0e59699 100644 --- a/arch/x86/entry/vdso/vgetcpu.c +++ b/arch/x86/entry/vdso/vgetcpu.c @@ -6,17 +6,16 @@ */ #include <linux/kernel.h> -#include <linux/getcpu.h> #include <asm/segment.h> #include <vdso/processor.h> notrace long -__vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused) +__vdso_getcpu(unsigned *cpu, unsigned *node, void *unused) { vdso_read_cpunode(cpu, node); return 0; } -long getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache) +long getcpu(unsigned *cpu, unsigned *node, void *tcache) __attribute__((weak, alias("__vdso_getcpu"))); diff --git a/arch/x86/include/asm/vdso/processor.h b/arch/x86/include/asm/vdso/processor.h index 7000aeb59aa287e2119c3d43ab3eaf82befb59c4..93e0e24e5cb47f7b0056c13f2a7f2304ed4a0595 100644 --- a/arch/x86/include/asm/vdso/processor.h +++ b/arch/x86/include/asm/vdso/processor.h @@ -18,9 +18,7 @@ static __always_inline void cpu_relax(void) native_pause(); } -struct getcpu_cache; - -notrace long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused); +notrace long __vdso_getcpu(unsigned *cpu, unsigned *node, void *unused); #endif /* __ASSEMBLER__ */ diff --git a/arch/x86/um/vdso/um_vdso.c b/arch/x86/um/vdso/um_vdso.c index cbae2584124fd0ff0f9d240c33fefb8d213c84cd..9aa2c62cce6b7a07bbaf8441014d347162d1950d 100644 --- a/arch/x86/um/vdso/um_vdso.c +++ b/arch/x86/um/vdso/um_vdso.c @@ -10,14 +10,13 @@ #define DISABLE_BRANCH_PROFILING #include <linux/time.h> -#include <linux/getcpu.h> #include <asm/unistd.h> /* workaround for -Wmissing-prototypes warnings */ int __vdso_clock_gettime(clockid_t clock, struct __kernel_old_timespec *ts); int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz); __kernel_old_time_t __vdso_time(__kernel_old_time_t *t); -long __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused); +long __vdso_getcpu(unsigned int *cpu, unsigned int *node, void *unused); int __vdso_clock_gettime(clockid_t clock, struct __kernel_old_timespec *ts) { @@ -60,7 +59,7 @@ __kernel_old_time_t __vdso_time(__kernel_old_time_t *t) __kernel_old_time_t time(__kernel_old_time_t *t) __attribute__((weak, alias("__vdso_time"))); long -__vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused) +__vdso_getcpu(unsigned int *cpu, unsigned int *node, void *unused) { /* * UML does not support SMP, we can cheat here. :) @@ -74,5 +73,5 @@ __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused return 0; } -long getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *tcache) +long getcpu(unsigned int *cpu, unsigned int *node, void *tcache) __attribute__((weak, alias("__vdso_getcpu"))); diff --git a/include/linux/getcpu.h b/include/linux/getcpu.h deleted file mode 100644 index c304dcdb4eac2a9117080e6a14f4e3f28d07fd56..0000000000000000000000000000000000000000 --- a/include/linux/getcpu.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_GETCPU_H -#define _LINUX_GETCPU_H 1 - -/* Cache for getcpu() to speed it up. Results might be a short time - out of date, but will be faster. - - User programs should not refer to the contents of this structure. - I repeat they should not refer to it. If they do they will break - in future kernels. - - It is only a private cache for vgetcpu(). It will change in future kernels. - The user program must store this information per thread (__thread) - If you want 100% accurate information pass NULL instead. */ -struct getcpu_cache { - unsigned long blob[128 / sizeof(long)]; -}; - -#endif diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 66c06fcdfe19e27b99eb9a187c22e022e260802f..403488e5eba906ecf40975fc3cb29ed0402491f2 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -59,7 +59,6 @@ struct compat_stat; struct old_timeval32; struct robust_list_head; struct futex_waitv; -struct getcpu_cache; struct old_linux_dirent; struct perf_event_attr; struct file_handle; @@ -714,7 +713,7 @@ asmlinkage long sys_getrusage(int who, struct rusage __user *ru); asmlinkage long sys_umask(int mask); asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5); -asmlinkage long sys_getcpu(unsigned __user *cpu, unsigned __user *node, struct getcpu_cache __user *cache); +asmlinkage long sys_getcpu(unsigned __user *cpu, unsigned __user *node, void __user *cache); asmlinkage long sys_gettimeofday(struct __kernel_old_timeval __user *tv, struct timezone __user *tz); asmlinkage long sys_settimeofday(struct __kernel_old_timeval __user *tv, diff --git a/kernel/sys.c b/kernel/sys.c index 8b58eece4e580b883d19bb1336aff627ae783a4d..f1780ab132a3fbce6aac937ade5b9a35d9837f13 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -31,7 +31,6 @@ #include <linux/tty.h> #include <linux/signal.h> #include <linux/cn_proc.h> -#include <linux/getcpu.h> #include <linux/task_io_accounting_ops.h> #include <linux/seccomp.h> #include <linux/cpu.h> @@ -2876,8 +2875,7 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3, return error; } -SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep, - struct getcpu_cache __user *, unused) +SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep, void __user *, unused) { int err = 0; int cpu = raw_smp_processor_id(); diff --git a/tools/testing/selftests/vDSO/vdso_test_getcpu.c b/tools/testing/selftests/vDSO/vdso_test_getcpu.c index cdeaed45fb26c61f6314c58fe1b71fa0be3c0108..994ce569dc37c6689b1a3c79156e3dfc8bf27f22 100644 --- a/tools/testing/selftests/vDSO/vdso_test_getcpu.c +++ b/tools/testing/selftests/vDSO/vdso_test_getcpu.c @@ -16,9 +16,7 @@ #include "vdso_config.h" #include "vdso_call.h" -struct getcpu_cache; -typedef long (*getcpu_t)(unsigned int *, unsigned int *, - struct getcpu_cache *); +typedef long (*getcpu_t)(unsigned int *, unsigned int *, void *); int main(int argc, char **argv) { --- base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787 change-id: 20250825-getcpu_cache-3abcd2e65437 Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

2 months, 1 week

5
7
0 0

[PATCH v3 0/4] selftests/resctrl: Enable MBM and MBA tests on AMD

by Babu Moger

The MBM (Memory Bandwidth Monitoring) and MBA (Memory Bandwidth Allocation) features are not enabled for AMD systems. The reason was lack of perf counters to compare the resctrl test results. Starting with the commit 25e56847821f ("perf/x86/amd/uncore: Add memory controller support"), AMD now supports the UMC (Unified Memory Controller) perf events. These events can be used to compare the test results. This series adds the support to detect the UMC events and enable MBM/MBA tests for AMD systems. v3: Note: Based the series on top of latest kselftests/master 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0 (tag: v6.10-rc1). Also applied the patches from the series https://lore.kernel.org/lkml/20240531131142.1716-1-ilpo.jarvinen@linux.inte… Separated the fix patch. Renamed the imc to just mc to make it generic. Changed the search string "uncore_imc_" and "amd_umc_" Changes related rebase to latest kselftest tree. v2: Changes. a. Rebased on top of tip/master (Apr 25, 2024) b. Addressed Ilpo comments except the one about close call. It seems more clear to keep READ and WRITE separate. https://lore.kernel.org/lkml/8e4badb7-6cc5-61f1-e041-d902209a90d5@linux.int… c. Used ksft_perror call when applicable. d. Added vendor check for non contiguous CBM check. v1: https://lore.kernel.org/lkml/cover.1708637563.git.babu.moger@amd.com/ Babu Moger (4): selftests/resctrl: Rename variables and functions to generic names selftests/resctrl: Pass sysfs controller name of the vendor selftests/resctrl: Add support for MBM and MBA tests on AMD selftests/resctrl: Enable MBA/MBA tests on AMD tools/testing/selftests/resctrl/mba_test.c | 25 +- tools/testing/selftests/resctrl/mbm_test.c | 23 +- tools/testing/selftests/resctrl/resctrl.h | 2 +- tools/testing/selftests/resctrl/resctrl_val.c | 305 ++++++++++-------- tools/testing/selftests/resctrl/resctrlfs.c | 2 +- 5 files changed, 191 insertions(+), 166 deletions(-) -- 2.34.1

2 months, 1 week

5
15
0 0

[PATCH net v7 0/4] net: netpoll: fix memory leak and add comprehensive selftests

by Breno Leitao

Fix a memory leak in netpoll and introduce netconsole selftests that expose the issue when running with kmemleak detection enabled. This patchset includes a selftest for netpoll with multiple concurrent users (netconsole + bonding), which simulates the scenario from test[1] that originally demonstrated the issue allegedly fixed by commit efa95b01da18 ("netpoll: fix use after free") - a commit that is now being reverted. Sending this to "net" branch because this is a fix, and the selftest might help with the backports validation. Link: https://lore.kernel.org/lkml/96b940137a50e5c387687bb4f57de8b0435a653f.14048… [1] Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Changes in v7: - Rebased on top of `net` - Link to v6: https://lore.kernel.org/r/20251002-netconsole_torture-v6-0-543bf52f6b46@deb… Changes in v6: - Expand the tests even more and some small fixups - Moved the test to bonding selftests - Link to v5: https://lore.kernel.org/r/20250918-netconsole_torture-v5-0-77e25e0a4eb6@deb… Changes in v5: - Set CONFIG_BONDING=m in selftests/drivers/net/config. - Link to v4: https://lore.kernel.org/r/20250917-netconsole_torture-v4-0-0a5b3b8f81ce@deb… Changes in v4: - Added an additional selftest to test multiple netpoll users in parallel - Link to v3: https://lore.kernel.org/r/20250905-netconsole_torture-v3-0-875c7febd316@deb… Changes in v3: - This patchset is a merge of the fix and the selftest together as recommended by Jakub. Changes in v2: - Reuse the netconsole creation from lib_netcons.sh. Thus, refactoring the create_dynamic_target() (Jakub) - Move the "wait" to after all the messages has been sent. - Link to v1: https://lore.kernel.org/r/20250902-netconsole_torture-v1-1-03c6066598e9@deb… --- Breno Leitao (4): net: netpoll: fix incorrect refcount handling causing incorrect cleanup selftest: netcons: refactor target creation selftest: netcons: create a torture test selftest: netcons: add test for netconsole over bonded interfaces net/core/netpoll.c | 7 +- tools/testing/selftests/drivers/net/Makefile | 1 + .../testing/selftests/drivers/net/bonding/Makefile | 2 + tools/testing/selftests/drivers/net/bonding/config | 4 + .../drivers/net/bonding/netcons_over_bonding.sh | 221 +++++++++++++++++++++ .../selftests/drivers/net/lib/sh/lib_netcons.sh | 188 ++++++++++++++++-- .../selftests/drivers/net/netcons_torture.sh | 127 ++++++++++++ 7 files changed, 530 insertions(+), 20 deletions(-) --- base-commit: 7ae421cf78bd795513ec3a7d7ef7ac9437693e23 change-id: 20250902-netconsole_torture-8fc23f0aca99 Best regards, -- Breno Leitao <leitao(a)debian.org>

2 months, 1 week

2
8
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror