- Linux-kselftest-mirror - lists.linaro.org

[PATCH net-next 0/9] refactor duplicate codes in the tc cls walk function

by Zhengchao Shao

The walk implementation of most tc cls modules is basically the same. That is, the values of count and skip are checked first. If count is greater than or equal to skip, the registered fn function is executed. Otherwise, increase the value of count. So the code can be refactored. Then use helper function to replace the code of each cls module in alphabetical order. The walk function is invoked during dump. Therefore, test cases related to the tdc filter need to be added. Add test cases locally and perform the test. The test results are listed below: ./tdc.py -e 0811 ok 1 0811 - Add multiple basic filter with cmp ematch u8/link layer and default action and dump them ./tdc.py -e 5129 ok 1 5129 - List basic filters ./tdc.py -c filters bpf ok 13 23c3 - Add cBPF filter with valid bytecode ok 14 1563 - Add cBPF filter with invalid bytecode ok 15 2334 - Add eBPF filter with valid object-file ok 16 2373 - Add eBPF filter with invalid object-file ok 17 4423 - Replace cBPF bytecode ok 18 5122 - Delete cBPF filter ok 19 e0a9 - List cBPF filters ./tdc.py -c filters cgroup ok 1 6273 - Add cgroup filter with cmp ematch u8/link layer and drop action ok 2 4721 - Add cgroup filter with cmp ematch u8/link layer with trans flag and pass action ok 3 d392 - Add cgroup filter with cmp ematch u16/link layer and pipe action ok 4 0234 - Add cgroup filter with cmp ematch u32/link layer and miltiple actions ok 5 8499 - Add cgroup filter with cmp ematch u8/network layer and pass action ok 6 b273 - Add cgroup filter with cmp ematch u8/network layer with trans flag and drop action ok 7 1934 - Add cgroup filter with cmp ematch u16/network layer and pipe action ok 8 2733 - Add cgroup filter with cmp ematch u32/network layer and miltiple actions ok 9 3271 - Add cgroup filter with NOT cmp ematch rule and pass action ok 10 2362 - Add cgroup filter with two ANDed cmp ematch rules and single action ok 11 9993 - Add cgroup filter with two ORed cmp ematch rules and single action ok 12 2331 - Add cgroup filter with two ANDed cmp ematch rules and one ORed ematch rule and single action ok 13 3645 - Add cgroup filter with two ANDed cmp ematch rules and one NOT ORed ematch rule and single action ok 14 b124 - Add cgroup filter with u32 ematch u8/zero offset and drop action ok 15 7381 - Add cgroup filter with u32 ematch u8/zero offset and invalid value >0xFF ok 16 2231 - Add cgroup filter with u32 ematch u8/positive offset and drop action ok 17 1882 - Add cgroup filter with u32 ematch u8/invalid mask >0xFF ok 18 1237 - Add cgroup filter with u32 ematch u8/missing offset ok 19 3812 - Add cgroup filter with u32 ematch u8/missing AT keyword ok 20 1112 - Add cgroup filter with u32 ematch u8/missing value ok 21 3241 - Add cgroup filter with u32 ematch u8/non-numeric value ok 22 e231 - Add cgroup filter with u32 ematch u8/non-numeric mask ok 23 4652 - Add cgroup filter with u32 ematch u8/negative offset and pass action ok 24 1331 - Add cgroup filter with u32 ematch u16/zero offset and pipe action ok 25 e354 - Add cgroup filter with u32 ematch u16/zero offset and invalid value >0xFFFF ok 26 3538 - Add cgroup filter with u32 ematch u16/positive offset and drop action ok 27 4576 - Add cgroup filter with u32 ematch u16/invalid mask >0xFFFF ok 28 b842 - Add cgroup filter with u32 ematch u16/missing offset ok 29 c924 - Add cgroup filter with u32 ematch u16/missing AT keyword ok 30 cc93 - Add cgroup filter with u32 ematch u16/missing value ok 31 123c - Add cgroup filter with u32 ematch u16/non-numeric value ok 32 3675 - Add cgroup filter with u32 ematch u16/non-numeric mask ok 33 1123 - Add cgroup filter with u32 ematch u16/negative offset and drop action ok 34 4234 - Add cgroup filter with u32 ematch u16/nexthdr+ offset and pass action ok 35 e912 - Add cgroup filter with u32 ematch u32/zero offset and pipe action ok 36 1435 - Add cgroup filter with u32 ematch u32/positive offset and drop action ok 37 1282 - Add cgroup filter with u32 ematch u32/missing offset ok 38 6456 - Add cgroup filter with u32 ematch u32/missing AT keyword ok 39 4231 - Add cgroup filter with u32 ematch u32/missing value ok 40 2131 - Add cgroup filter with u32 ematch u32/non-numeric value ok 41 f125 - Add cgroup filter with u32 ematch u32/non-numeric mask ok 42 4316 - Add cgroup filter with u32 ematch u32/negative offset and drop action ok 43 23ae - Add cgroup filter with u32 ematch u32/nexthdr+ offset and pipe action ok 44 23a1 - Add cgroup filter with canid ematch and single SFF ok 45 324f - Add cgroup filter with canid ematch and single SFF with mask ok 46 2576 - Add cgroup filter with canid ematch and multiple SFF ok 47 4839 - Add cgroup filter with canid ematch and multiple SFF with masks ok 48 6713 - Add cgroup filter with canid ematch and single EFF ok 49 4572 - Add cgroup filter with canid ematch and single EFF with mask ok 50 8031 - Add cgroup filter with canid ematch and multiple EFF ok 51 ab9d - Add cgroup filter with canid ematch and multiple EFF with masks ok 52 5349 - Add cgroup filter with canid ematch and a combination of SFF/EFF ok 53 c934 - Add cgroup filter with canid ematch and a combination of SFF/EFF with masks ok 54 4319 - Replace cgroup filter with diffferent match ok 55 4636 - Detele cgroup filter ./tdc.py -c filters flow ok 1 5294 - Add flow filter with map key and ops ok 2 3514 - Add flow filter with map key or ops ok 3 7534 - Add flow filter with map key xor ops ok 4 4524 - Add flow filter with map key rshift ops ok 5 0230 - Add flow filter with map key addend ops ok 6 2344 - Add flow filter with src map key ok 7 9304 - Add flow filter with proto map key ok 8 9038 - Add flow filter with proto-src map key ok 9 2a03 - Add flow filter with proto-dst map key ok 10 a073 - Add flow filter with iif map key ok 11 3b20 - Add flow filter with priority map key ok 12 8945 - Add flow filter with mark map key ok 13 c034 - Add flow filter with nfct map key ok 14 0205 - Add flow filter with nfct-src map key ok 15 5315 - Add flow filter with nfct-src map key ok 16 7849 - Add flow filter with nfct-proto-src map key ok 17 9902 - Add flow filter with nfct-proto-dst map key ok 18 6742 - Add flow filter with rt-classid map key ok 19 5432 - Add flow filter with sk-uid map key ok 20 4234 - Add flow filter with sk-gid map key ok 21 4522 - Add flow filter with vlan-tag map key ok 22 4253 - Add flow filter with rxhash map key ok 23 4452 - Add flow filter with hash key list ok 24 4341 - Add flow filter with muliple ops ok 25 4322 - List flow filters ok 26 2320 - Replace flow filter with map key num ok 27 3213 - Delete flow filter with map key num ./tdc.py -c filters route ok 1 e122 - Add route filter with from and to tag ok 2 6573 - Add route filter with fromif and to tag ok 3 1362 - Add route filter with to flag and reclassify action ok 4 4720 - Add route filter with from flag and continue actions ok 5 2812 - Add route filter with form tag and pipe action ok 6 7994 - Add route filter with miltiple actions ok 7 4312 - List route filters ok 8 2634 - Delete route filters with pipe action ./tdc.py -c filters rsvp ok 1 2141 - Add rsvp filter with tcp proto and specific IP address ok 2 5267 - Add rsvp filter with udp proto and specific IP address ok 3 2819 - Add rsvp filter with src ip and src port ok 4 c967 - Add rsvp filter with tunnelid and continue action ok 5 5463 - Add rsvp filter with tunnel and pipe action ok 6 2332 - Add rsvp filter with miltiple actions ok 7 8879 - Add rsvp filter with tunnel and skp flag ok 8 8261 - List rsvp filters ok 9 8989 - Delete rsvp filters ./tdc.py -c filters tcindex ok 1 8293 - Add tcindex filter with default action ok 2 7281 - Add tcindex filter with hash size and pass action ok 3 b294 - Add tcindex filter with mask shift and reclassify action ok 4 0532 - Add tcindex filter with pass_on and continue actions ok 5 d473 - Add tcindex filter with pipe action ok 6 2940 - Add tcindex filter with miltiple actions ok 7 1893 - List tcindex filters ok 8 2041 - Change tcindex filters with pass action ok 9 9203 - Replace tcindex filters with pass action ok 10 7957 - Delete tcindex filters with drop action Zhengchao Shao (9): net/sched: cls_api: add helper for tc cls walker stats updating net/sched: use tc_cls_stats_update() in filter selftests/tc-testings: add selftests for bpf filter selftests/tc-testings: add selftests for cgroup filter selftests/tc-testings: add selftests for flow filter selftests/tc-testings: add selftests for route filter selftests/tc-testings: add selftests for rsvp filter selftests/tc-testings: add selftests for tcindex filter selftests/tc-testings: add list case for basic filter include/net/pkt_cls.h | 13 + net/sched/cls_basic.c | 9 +- net/sched/cls_bpf.c | 8 +- net/sched/cls_flow.c | 8 +- net/sched/cls_fw.c | 9 +- net/sched/cls_route.c | 9 +- net/sched/cls_rsvp.h | 9 +- net/sched/cls_tcindex.c | 18 +- net/sched/cls_u32.c | 20 +- .../tc-testing/tc-tests/filters/basic.json | 47 + .../tc-testing/tc-tests/filters/bpf.json | 171 +++ .../tc-testing/tc-tests/filters/cgroup.json | 1236 +++++++++++++++++ .../tc-testing/tc-tests/filters/flow.json | 623 +++++++++ .../tc-testing/tc-tests/filters/route.json | 181 +++ .../tc-testing/tc-tests/filters/rsvp.json | 203 +++ .../tc-testing/tc-tests/filters/tcindex.json | 227 +++ 16 files changed, 2716 insertions(+), 75 deletions(-) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/filters/bpf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/filters/cgroup.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/filters/flow.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/filters/route.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/filters/rsvp.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/filters/tcindex.json -- 2.17.1

2 years, 1 month

4
14
0 0

[V1 PATCH 0/5] Execute hypercalls from guests according to cpu type

by Vishal Annapurve

This series is posted in context of the discussion at: https://lore.kernel.org/lkml/Ywa9T+jKUpaHLu%2Fl@google.com/ Major changes: 1) Move common startup logic to a single common main function in kvm_util.c 2) Introduce following APIs: kvm_arch_main: to perform arch specific common startup. kvm_post_vm_load: to update the guest memory state to convey common information to guests. 3) For x86, capture cpu type at startup and pass on the cpu type to guest after guest elf is loaded. 4) Execute hypercall instruction from within guest VMs according to the cpu type. This will help prevent an extra kvm exit during hypercall execution. Vishal Annapurve (5): selftests: kvm: move common startup logic to kvm_util.c selftests: kvm: Introduce kvm_arch_main and helpers selftests: kvm: x86: Execute vmcall/vmmcall according to CPU type selftests: kvm: delete svm_vmcall_test selftests: kvm: Execute vmcall/vmmcall as per cpu type tools/testing/selftests/kvm/.gitignore | 1 - .../selftests/kvm/aarch64/arch_timer.c | 5 +- .../selftests/kvm/aarch64/debug-exceptions.c | 2 +- .../selftests/kvm/aarch64/get-reg-list.c | 2 +- .../selftests/kvm/aarch64/hypercalls.c | 4 +- .../testing/selftests/kvm/aarch64/psci_test.c | 2 +- .../selftests/kvm/aarch64/vcpu_width_config.c | 2 +- .../testing/selftests/kvm/aarch64/vgic_init.c | 2 +- .../testing/selftests/kvm/aarch64/vgic_irq.c | 5 +- .../selftests/kvm/access_tracking_perf_test.c | 4 +- .../selftests/kvm/demand_paging_test.c | 7 +- .../selftests/kvm/dirty_log_perf_test.c | 4 +- tools/testing/selftests/kvm/dirty_log_test.c | 4 +- .../selftests/kvm/hardware_disable_test.c | 2 +- .../selftests/kvm/include/kvm_util_base.h | 15 ++++ .../selftests/kvm/include/x86_64/processor.h | 10 +++ .../selftests/kvm/include/x86_64/vmx.h | 9 --- .../selftests/kvm/kvm_binary_stats_test.c | 3 +- .../selftests/kvm/kvm_create_max_vcpus.c | 4 +- .../selftests/kvm/kvm_page_table_test.c | 4 +- .../selftests/kvm/lib/aarch64/processor.c | 8 ++ tools/testing/selftests/kvm/lib/elf.c | 2 + tools/testing/selftests/kvm/lib/kvm_util.c | 12 +++ .../selftests/kvm/lib/riscv/processor.c | 8 ++ .../selftests/kvm/lib/s390x/processor.c | 8 ++ tools/testing/selftests/kvm/lib/sparsebit.c | 2 +- .../selftests/kvm/lib/x86_64/perf_test_util.c | 2 +- .../selftests/kvm/lib/x86_64/processor.c | 38 +++++++++- .../selftests/kvm/max_guest_memory_test.c | 2 +- .../kvm/memslot_modification_stress_test.c | 4 +- .../testing/selftests/kvm/memslot_perf_test.c | 9 +-- tools/testing/selftests/kvm/rseq_test.c | 7 +- tools/testing/selftests/kvm/s390x/memop.c | 4 +- tools/testing/selftests/kvm/s390x/resets.c | 4 +- .../selftests/kvm/s390x/sync_regs_test.c | 5 +- tools/testing/selftests/kvm/s390x/tprot.c | 2 +- .../selftests/kvm/set_memory_region_test.c | 7 +- tools/testing/selftests/kvm/steal_time.c | 4 +- .../kvm/system_counter_offset_test.c | 2 +- tools/testing/selftests/kvm/x86_64/amx_test.c | 2 +- .../testing/selftests/kvm/x86_64/cpuid_test.c | 2 +- .../kvm/x86_64/cr4_cpuid_sync_test.c | 6 +- .../testing/selftests/kvm/x86_64/debug_regs.c | 4 +- .../kvm/x86_64/emulator_error_test.c | 7 +- .../testing/selftests/kvm/x86_64/evmcs_test.c | 2 +- .../selftests/kvm/x86_64/fix_hypercall_test.c | 2 +- .../kvm/x86_64/get_msr_index_features.c | 2 +- .../selftests/kvm/x86_64/hyperv_clock.c | 2 +- .../selftests/kvm/x86_64/hyperv_cpuid.c | 7 +- .../selftests/kvm/x86_64/hyperv_features.c | 2 +- .../selftests/kvm/x86_64/hyperv_svm_test.c | 2 +- .../selftests/kvm/x86_64/kvm_clock_test.c | 2 +- .../selftests/kvm/x86_64/kvm_pv_test.c | 2 +- .../kvm/x86_64/max_vcpuid_cap_test.c | 3 +- .../selftests/kvm/x86_64/mmio_warning_test.c | 4 +- .../selftests/kvm/x86_64/monitor_mwait_test.c | 3 +- .../selftests/kvm/x86_64/nx_huge_pages_test.c | 4 +- .../selftests/kvm/x86_64/platform_info_test.c | 7 +- .../kvm/x86_64/pmu_event_filter_test.c | 7 +- .../selftests/kvm/x86_64/set_boot_cpu_id.c | 2 +- .../selftests/kvm/x86_64/set_sregs_test.c | 7 +- .../selftests/kvm/x86_64/sev_migrate_tests.c | 3 +- tools/testing/selftests/kvm/x86_64/smm_test.c | 4 +- .../testing/selftests/kvm/x86_64/state_test.c | 10 +-- .../selftests/kvm/x86_64/svm_int_ctl_test.c | 3 +- .../kvm/x86_64/svm_nested_soft_inject_test.c | 7 +- .../selftests/kvm/x86_64/svm_vmcall_test.c | 74 ------------------- .../selftests/kvm/x86_64/sync_regs_test.c | 7 +- .../kvm/x86_64/triple_fault_event_test.c | 2 +- .../selftests/kvm/x86_64/tsc_msrs_test.c | 4 +- .../selftests/kvm/x86_64/tsc_scaling_sync.c | 3 +- .../kvm/x86_64/ucna_injection_test.c | 2 +- .../selftests/kvm/x86_64/userspace_io_test.c | 6 +- .../kvm/x86_64/userspace_msr_exit_test.c | 7 +- .../kvm/x86_64/vmx_apic_access_test.c | 5 +- .../kvm/x86_64/vmx_close_while_nested_test.c | 2 +- .../selftests/kvm/x86_64/vmx_dirty_log_test.c | 4 +- .../vmx_exception_with_invalid_guest_state.c | 2 +- .../x86_64/vmx_invalid_nested_guest_state.c | 2 +- .../selftests/kvm/x86_64/vmx_msrs_test.c | 2 +- .../kvm/x86_64/vmx_nested_tsc_scaling_test.c | 5 +- .../selftests/kvm/x86_64/vmx_pmu_caps_test.c | 2 +- .../kvm/x86_64/vmx_preemption_timer_test.c | 4 +- .../kvm/x86_64/vmx_set_nested_state_test.c | 3 +- .../kvm/x86_64/vmx_tsc_adjust_test.c | 5 +- .../selftests/kvm/x86_64/xapic_ipi_test.c | 4 +- .../selftests/kvm/x86_64/xapic_state_test.c | 2 +- .../selftests/kvm/x86_64/xen_shinfo_test.c | 67 +++++++---------- .../selftests/kvm/x86_64/xen_vmcall_test.c | 17 +++-- .../selftests/kvm/x86_64/xss_msr_test.c | 2 +- 90 files changed, 223 insertions(+), 339 deletions(-) delete mode 100644 tools/testing/selftests/kvm/x86_64/svm_vmcall_test.c -- 2.37.2.789.g6183377224-goog

2 years, 1 month

3
16
0 0

[RFC PATCH] bonding: cause oops on aarch64 architecture in bond_rr_gen_slave_id

by Jonathan Toppins

This bonding selftest causes the following kernel oops on aarch64 and possibly ppc64le architectures. This was reproduced on net/master commit 64ae13ed478428135cddc2f1113dff162d8112d4 net: core: fix flow symmetric hash [ 329.805838] kselftest: Running tests in drivers/net/bonding [ 330.011028] eth0: renamed from link1_2 [ 330.220846] eth0: renamed from link1_1 [ 330.387755] bond0: (slave eth0): making interface the new active one [ 330.394165] bond0: (slave eth0): Enslaving as an active interface with an up link [ 330.401867] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 334.586619] bond0: (slave eth0): Releasing backup interface [ 334.671065] bond0: (slave eth0): Enslaving as an active interface with an up link [ 334.686773] Unable to handle kernel paging request at virtual address ffff2c91ac905000 [ 334.694703] Mem abort info: [ 334.697486] ESR = 0x0000000096000004 [ 334.701234] EC = 0x25: DABT (current EL), IL = 32 bits [ 334.706536] SET = 0, FnV = 0 [ 334.709579] EA = 0, S1PTW = 0 [ 334.712719] FSC = 0x04: level 0 translation fault [ 334.717586] Data abort info: [ 334.720454] ISV = 0, ISS = 0x00000004 [ 334.724288] CM = 0, WnR = 0 [ 334.727244] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000008044d662000 [ 334.733944] [ffff2c91ac905000] pgd=0000000000000000, p4d=0000000000000000 [ 334.740734] Internal error: Oops: 96000004 [#1] SMP [ 334.745602] Modules linked in: bonding tls veth rfkill sunrpc arm_spe_pmu vfat fat acpi_ipmi ipmi_ssif ixgbe igb i40e mdio ipmi_devintf ipmi_msghandler arm_cmn arm_dsu_pmu cppc_cpufreq acpi_tad fuse zram crct10dif_ce ast ghash_ce sbsa_gwdt nvme drm_vram_helper drm_ttm_helper nvme_core ttm xgene_hwmon [ 334.772217] CPU: 7 PID: 2214 Comm: ping Not tainted 6.0.0-rc4-00133-g64ae13ed4784 #4 [ 334.779950] Hardware name: GIGABYTE R272-P31-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 [ 334.789244] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 334.796196] pc : bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.801691] lr : bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.807962] sp : ffff8000221733e0 [ 334.811265] x29: ffff8000221733e0 x28: ffffdbac8572d198 x27: ffff80002217357c [ 334.818392] x26: 000000000000002a x25: ffffdbacb33ee000 x24: ffff07ff980fa000 [ 334.825519] x23: ffffdbacb2e398ba x22: ffff07ff98102000 x21: ffff07ff981029c0 [ 334.832646] x20: 0000000000000001 x19: ffff07ff981029c0 x18: 0000000000000014 [ 334.839773] x17: 0000000000000000 x16: ffffdbacb1004364 x15: 0000aaaabe2f5a62 [ 334.846899] x14: ffff07ff8e55d968 x13: ffff07ff8e55db30 x12: 0000000000000000 [ 334.854026] x11: ffffdbacb21532e8 x10: 0000000000000001 x9 : ffffdbac857178ec [ 334.861153] x8 : ffff07ff9f6e5a28 x7 : 0000000000000000 x6 : 000000007c2b3742 [ 334.868279] x5 : ffff2c91ac905000 x4 : ffff2c91ac905000 x3 : ffff07ff9f554400 [ 334.875406] x2 : ffff2c91ac905000 x1 : 0000000000000001 x0 : ffff07ff981029c0 [ 334.882532] Call trace: [ 334.884967] bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.890109] bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.896033] __bond_start_xmit+0x128/0x3a0 [bonding] [ 334.901001] bond_start_xmit+0x54/0xb0 [bonding] [ 334.905622] dev_hard_start_xmit+0xb4/0x220 [ 334.909798] __dev_queue_xmit+0x1a0/0x720 [ 334.913799] arp_xmit+0x3c/0xbc [ 334.916932] arp_send_dst+0x98/0xd0 [ 334.920410] arp_solicit+0xe8/0x230 [ 334.923888] neigh_probe+0x60/0xb0 [ 334.927279] __neigh_event_send+0x3b0/0x470 [ 334.931453] neigh_resolve_output+0x70/0x90 [ 334.935626] ip_finish_output2+0x158/0x514 [ 334.939714] __ip_finish_output+0xac/0x1a4 [ 334.943800] ip_finish_output+0x40/0xfc [ 334.947626] ip_output+0xf8/0x1a4 [ 334.950931] ip_send_skb+0x5c/0x100 [ 334.954410] ip_push_pending_frames+0x3c/0x60 [ 334.958758] raw_sendmsg+0x458/0x6d0 [ 334.962325] inet_sendmsg+0x50/0x80 [ 334.965805] sock_sendmsg+0x60/0x6c [ 334.969286] __sys_sendto+0xc8/0x134 [ 334.972853] __arm64_sys_sendto+0x34/0x4c [ 334.976854] invoke_syscall+0x78/0x100 [ 334.980594] el0_svc_common.constprop.0+0x4c/0xf4 [ 334.985287] do_el0_svc+0x38/0x4c [ 334.988591] el0_svc+0x34/0x10c [ 334.991724] el0t_64_sync_handler+0x11c/0x150 [ 334.996072] el0t_64_sync+0x190/0x194 [ 334.999726] Code: b9001062 f9403c02 d53cd044 8b040042 (b8210040) [ 335.005810] ---[ end trace 0000000000000000 ]--- [ 335.010416] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 335.017279] SMP: stopping secondary CPUs [ 335.021374] Kernel Offset: 0x5baca8eb0000 from 0xffff800008000000 [ 335.027456] PHYS_OFFSET: 0x80000000 [ 335.030932] CPU features: 0x0000,0085c029,19805c82 [ 335.035713] Memory Limit: none [ 335.038756] Rebooting in 180 seconds.. Signed-off-by: Jonathan Toppins <jtoppins(a)redhat.com> --- .../selftests/drivers/net/bonding/Makefile | 1 + .../bonding/bond-arp-interval-causes-panic.sh | 46 +++++++++++++++++++ 2 files changed, 47 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile index ab6c54b12098..79bb06fd386a 100644 --- a/tools/testing/selftests/drivers/net/bonding/Makefile +++ b/tools/testing/selftests/drivers/net/bonding/Makefile @@ -2,5 +2,6 @@ # Makefile for net selftests TEST_PROGS := bond-break-lacpdu-tx.sh +TEST_PROGS += bond-arp-interval-causes-panic.sh include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh b/tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh new file mode 100755 index 000000000000..0c3e5d486193 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh @@ -0,0 +1,46 @@ +#!/bin/sh + +# cause kernel oops in bond_rr_gen_slave_id on aarch64 and ppcle +# architectures +DEBUG=${DEBUG:-0} + +set -e +test ${DEBUG} -ne 0 && set -x + +function finish() +{ + ip -all netns delete + ip link del link1_1 || true +} + +trap finish EXIT + +client_ip4=192.168.1.198 +server_ip4=192.168.1.254 + +# setup kernel so it reboots after causing the panic +echo 180 >/proc/sys/kernel/panic + +# build namespaces +ip link add dev link1_1 type veth peer name link1_2 + +ip netns add "server" +ip link set dev link1_2 netns server up name eth0 +ip netns exec server ip addr add ${server_ip4}/24 dev eth0 + +ip netns add "client" +ip link set dev link1_1 netns client down name eth0 +ip netns exec client ip link add dev bond0 down type bond mode 1 miimon 100 all_slaves_active 1 +ip netns exec client ip link set dev eth0 down master bond0 +ip netns exec client ip link set dev bond0 up +ip netns exec client ip addr add ${client_ip4}/24 dev bond0 +ip netns exec client ping -c 5 $server_ip4 >/dev/null + +ip netns exec client ip link set dev eth0 down nomaster +ip netns exec client ip link set dev bond0 down +ip netns exec client ip link set dev bond0 type bond mode 0 arp_interval 1000 arp_ip_target "+${server_ip4}" +ip netns exec client ip link set dev eth0 down master bond0 +ip netns exec client ip link set dev bond0 up +ip netns exec client ping -c 5 $server_ip4 >/dev/null + +exit 0 -- 2.31.1

2 years, 1 month

2
2
0 0

[PATCH] selftests/futex: fix build for clang

by Ricardo Cañuelo

Don't use the test-specific header files as source files to force a target dependency, as clang will complain if more than one source file is used for a compile command with a single '-o' flag. Use the proper Makefile variables instead as defined in tools/testing/selftests/lib.mk. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo(a)collabora.com> --- tools/testing/selftests/futex/functional/Makefile | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/futex/functional/Makefile b/tools/testing/selftests/futex/functional/Makefile index 732149011692..5a0e0df8de9b 100644 --- a/tools/testing/selftests/futex/functional/Makefile +++ b/tools/testing/selftests/futex/functional/Makefile @@ -3,11 +3,11 @@ INCLUDES := -I../include -I../../ -I../../../../../usr/include/ CFLAGS := $(CFLAGS) -g -O2 -Wall -D_GNU_SOURCE -pthread $(INCLUDES) $(KHDR_INCLUDES) LDLIBS := -lpthread -lrt -HEADERS := \ +LOCAL_HDRS := \ ../include/futextest.h \ ../include/atomic.h \ ../include/logging.h -TEST_GEN_FILES := \ +TEST_GEN_PROGS := \ futex_wait_timeout \ futex_wait_wouldblock \ futex_requeue_pi \ @@ -24,5 +24,3 @@ TEST_PROGS := run.sh top_srcdir = ../../../../.. DEFAULT_INSTALL_HDR_PATH := 1 include ../../lib.mk - -$(TEST_GEN_FILES): $(HEADERS) -- 2.25.1

2 years, 1 month

2
2
0 0

[PATCH net-next,v2 0/9] refactor duplicate codes in the tc cls walk function

by Zhengchao Shao

The walk implementation of most tc cls modules is basically the same. That is, the values of count and skip are checked first. If count is greater than or equal to skip, the registered fn function is executed. Otherwise, increase the value of count. So the code can be refactored. Then use helper function to replace the code of each cls module in alphabetical order. The walk function is invoked during dump. Therefore, test cases related to the tdc filter need to be added. Add test cases locally and perform the test. The test results are listed below: ./tdc.py -e 0811 ok 1 0811 - Add multiple basic filter with cmp ematch u8/link layer and default action and dump them ./tdc.py -e 5129 ok 1 5129 - List basic filters ./tdc.py -c bpf-filter ok 1 23c3 - Add cBPF filter with valid bytecode ok 2 1563 - Add cBPF filter with invalid bytecode ok 3 2334 - Add eBPF filter with valid object-file ok 4 2373 - Add eBPF filter with invalid object-file ok 5 4423 - Replace cBPF bytecode ok 6 5122 - Delete cBPF filter ok 7 e0a9 - List cBPF filters ./tdc.py -c cgroup ok 1 6273 - Add cgroup filter with cmp ematch u8/link layer and drop action ok 2 4721 - Add cgroup filter with cmp ematch u8/link layer with trans flag and pass action ok 3 d392 - Add cgroup filter with cmp ematch u16/link layer and pipe action ok 4 0234 - Add cgroup filter with cmp ematch u32/link layer and miltiple actions ok 5 8499 - Add cgroup filter with cmp ematch u8/network layer and pass action ok 6 b273 - Add cgroup filter with cmp ematch u8/network layer with trans flag and drop action ok 7 1934 - Add cgroup filter with cmp ematch u16/network layer and pipe action ok 8 2733 - Add cgroup filter with cmp ematch u32/network layer and miltiple actions ok 9 3271 - Add cgroup filter with NOT cmp ematch rule and pass action ok 10 2362 - Add cgroup filter with two ANDed cmp ematch rules and single action ok 11 9993 - Add cgroup filter with two ORed cmp ematch rules and single action ok 12 2331 - Add cgroup filter with two ANDed cmp ematch rules and one ORed ematch rule and single action ok 13 3645 - Add cgroup filter with two ANDed cmp ematch rules and one NOT ORed ematch rule and single action ok 14 b124 - Add cgroup filter with u32 ematch u8/zero offset and drop action ok 15 7381 - Add cgroup filter with u32 ematch u8/zero offset and invalid value >0xFF ok 16 2231 - Add cgroup filter with u32 ematch u8/positive offset and drop action ok 17 1882 - Add cgroup filter with u32 ematch u8/invalid mask >0xFF ok 18 1237 - Add cgroup filter with u32 ematch u8/missing offset ok 19 3812 - Add cgroup filter with u32 ematch u8/missing AT keyword ok 20 1112 - Add cgroup filter with u32 ematch u8/missing value ok 21 3241 - Add cgroup filter with u32 ematch u8/non-numeric value ok 22 e231 - Add cgroup filter with u32 ematch u8/non-numeric mask ok 23 4652 - Add cgroup filter with u32 ematch u8/negative offset and pass action ok 24 1331 - Add cgroup filter with u32 ematch u16/zero offset and pipe action ok 25 e354 - Add cgroup filter with u32 ematch u16/zero offset and invalid value >0xFFFF ok 26 3538 - Add cgroup filter with u32 ematch u16/positive offset and drop action ok 27 4576 - Add cgroup filter with u32 ematch u16/invalid mask >0xFFFF ok 28 b842 - Add cgroup filter with u32 ematch u16/missing offset ok 29 c924 - Add cgroup filter with u32 ematch u16/missing AT keyword ok 30 cc93 - Add cgroup filter with u32 ematch u16/missing value ok 31 123c - Add cgroup filter with u32 ematch u16/non-numeric value ok 32 3675 - Add cgroup filter with u32 ematch u16/non-numeric mask ok 33 1123 - Add cgroup filter with u32 ematch u16/negative offset and drop action ok 34 4234 - Add cgroup filter with u32 ematch u16/nexthdr+ offset and pass action ok 35 e912 - Add cgroup filter with u32 ematch u32/zero offset and pipe action ok 36 1435 - Add cgroup filter with u32 ematch u32/positive offset and drop action ok 37 1282 - Add cgroup filter with u32 ematch u32/missing offset ok 38 6456 - Add cgroup filter with u32 ematch u32/missing AT keyword ok 39 4231 - Add cgroup filter with u32 ematch u32/missing value ok 40 2131 - Add cgroup filter with u32 ematch u32/non-numeric value ok 41 f125 - Add cgroup filter with u32 ematch u32/non-numeric mask ok 42 4316 - Add cgroup filter with u32 ematch u32/negative offset and drop action ok 43 23ae - Add cgroup filter with u32 ematch u32/nexthdr+ offset and pipe action ok 44 23a1 - Add cgroup filter with canid ematch and single SFF ok 45 324f - Add cgroup filter with canid ematch and single SFF with mask ok 46 2576 - Add cgroup filter with canid ematch and multiple SFF ok 47 4839 - Add cgroup filter with canid ematch and multiple SFF with masks ok 48 6713 - Add cgroup filter with canid ematch and single EFF ok 49 4572 - Add cgroup filter with canid ematch and single EFF with mask ok 50 8031 - Add cgroup filter with canid ematch and multiple EFF ok 51 ab9d - Add cgroup filter with canid ematch and multiple EFF with masks ok 52 5349 - Add cgroup filter with canid ematch and a combination of SFF/EFF ok 53 c934 - Add cgroup filter with canid ematch and a combination of SFF/EFF with masks ok 54 4319 - Replace cgroup filter with diffferent match ok 55 4636 - Detele cgroup filter ./tdc.py -c flow ok 1 5294 - Add flow filter with map key and ops ok 2 3514 - Add flow filter with map key or ops ok 3 7534 - Add flow filter with map key xor ops ok 4 4524 - Add flow filter with map key rshift ops ok 5 0230 - Add flow filter with map key addend ops ok 6 2344 - Add flow filter with src map key ok 7 9304 - Add flow filter with proto map key ok 8 9038 - Add flow filter with proto-src map key ok 9 2a03 - Add flow filter with proto-dst map key ok 10 a073 - Add flow filter with iif map key ok 11 3b20 - Add flow filter with priority map key ok 12 8945 - Add flow filter with mark map key ok 13 c034 - Add flow filter with nfct map key ok 14 0205 - Add flow filter with nfct-src map key ok 15 5315 - Add flow filter with nfct-src map key ok 16 7849 - Add flow filter with nfct-proto-src map key ok 17 9902 - Add flow filter with nfct-proto-dst map key ok 18 6742 - Add flow filter with rt-classid map key ok 19 5432 - Add flow filter with sk-uid map key ok 20 4234 - Add flow filter with sk-gid map key ok 21 4522 - Add flow filter with vlan-tag map key ok 22 4253 - Add flow filter with rxhash map key ok 23 4452 - Add flow filter with hash key list ok 24 4341 - Add flow filter with muliple ops ok 25 4392 - List flow filters ok 26 4322 - Change flow filter with map key num ok 27 2320 - Replace flow filter with map key num ok 28 3213 - Delete flow filter with map key num ./tdc.py -c route ok 1 e122 - Add route filter with from and to tag ok 2 6573 - Add route filter with fromif and to tag ok 3 1362 - Add route filter with to flag and reclassify action ok 4 4720 - Add route filter with from flag and continue actions ok 5 2812 - Add route filter with form tag and pipe action ok 6 7994 - Add route filter with miltiple actions ok 7 4312 - List route filters ok 8 2634 - Delete route filter with pipe action ./tdc.py -c rsvp ok 1 2141 - Add rsvp filter with tcp proto and specific IP address ok 2 5267 - Add rsvp filter with udp proto and specific IP address ok 3 2819 - Add rsvp filter with src ip and src port ok 4 c967 - Add rsvp filter with tunnelid and continue action ok 5 5463 - Add rsvp filter with tunnel and pipe action ok 6 2332 - Add rsvp filter with miltiple actions ok 7 8879 - Add rsvp filter with tunnel and skp flag ok 8 8261 - List rsvp filters ok 9 8989 - Delete rsvp filter ./tdc.py -c tcindex ok 1 8293 - Add tcindex filter with default action ok 2 7281 - Add tcindex filter with hash size and pass action ok 3 b294 - Add tcindex filter with mask shift and reclassify action ok 4 0532 - Add tcindex filter with pass_on and continue actions ok 5 d473 - Add tcindex filter with pipe action ok 6 2940 - Add tcindex filter with miltiple actions ok 7 1893 - List tcindex filters ok 8 2041 - Change tcindex filter with pass action ok 9 9203 - Replace tcindex filter with pass action ok 10 7957 - Delete tcindex filter with drop action --- v2: rectify spelling error; The category name bpf in filters file is renamed to bpf-filter --- Zhengchao Shao (9): net/sched: cls_api: add helper for tc cls walker stats updating net/sched: use tc_cls_stats_update() in filter selftests/tc-testings: add selftests for bpf filter selftests/tc-testings: add selftests for cgroup filter selftests/tc-testings: add selftests for flow filter selftests/tc-testings: add selftests for route filter selftests/tc-testings: add selftests for rsvp filter selftests/tc-testings: add selftests for tcindex filter selftests/tc-testings: add list case for basic filter include/net/pkt_cls.h | 13 + net/sched/cls_basic.c | 9 +- net/sched/cls_bpf.c | 8 +- net/sched/cls_flow.c | 8 +- net/sched/cls_fw.c | 9 +- net/sched/cls_route.c | 9 +- net/sched/cls_rsvp.h | 9 +- net/sched/cls_tcindex.c | 18 +- net/sched/cls_u32.c | 20 +- .../tc-testing/tc-tests/filters/basic.json | 47 + .../tc-testing/tc-tests/filters/bpf.json | 171 +++ .../tc-testing/tc-tests/filters/cgroup.json | 1236 +++++++++++++++++ .../tc-testing/tc-tests/filters/flow.json | 623 +++++++++ .../tc-testing/tc-tests/filters/route.json | 181 +++ .../tc-testing/tc-tests/filters/rsvp.json | 203 +++ .../tc-testing/tc-tests/filters/tcindex.json | 227 +++ 16 files changed, 2716 insertions(+), 75 deletions(-) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/filters/bpf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/filters/cgroup.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/filters/flow.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/filters/route.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/filters/rsvp.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/filters/tcindex.json -- 2.17.1

2 years, 1 month

1
9
0 0

[PATCH v6 1/2] x86/fpu: Allow PKRU to be (once again) written by ptrace.

by Kyle Huey

From: Kyle Huey <me(a)kylehuey.com> When management of the PKRU register was moved away from XSTATE, emulation of PKRU's existence in XSTATE was added for reading PKRU through ptrace, but not for writing PKRU through ptrace. This can be seen by running gdb and executing `p $pkru`, `set $pkru = 42`, and `p $pkru`. On affected kernels (5.14+) the write to the PKRU register (which gdb performs through ptrace) is ignored. There are three APIs that write PKRU: sigreturn, PTRACE_SETREGSET with NT_X86_XSTATE, and KVM_SET_XSAVE. sigreturn still uses XRSTOR to write to PKRU. KVM_SET_XSAVE has its own special handling to make PKRU writes take effect (in fpu_copy_uabi_to_guest_fpstate). Push that down into copy_uabi_to_xstate and have PTRACE_SETREGSET with NT_X86_XSTATE pass in a pointer to the appropriate PKRU slot. copy_sigframe_from_user_to_xstate depends on copy_uabi_to_xstate populating the PKRU field in the task's XSTATE so that __fpu_restore_sig can do a XRSTOR from it, so continue doing that. This also adds code to initialize the PKRU value to the hardware init value (namely 0) if the PKRU bit is not set in the XSTATE header provided to ptrace, to match XRSTOR. Fixes: e84ba47e313d ("x86/fpu: Hook up PKRU into ptrace()") Signed-off-by: Kyle Huey <me(a)kylehuey.com> Cc: Dave Hansen <dave.hansen(a)linux.intel.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Borislav Petkov <bp(a)suse.de> Cc: stable(a)vger.kernel.org # 5.14+ --- arch/x86/kernel/fpu/core.c | 20 +++++++++----------- arch/x86/kernel/fpu/regset.c | 2 +- arch/x86/kernel/fpu/signal.c | 2 +- arch/x86/kernel/fpu/xstate.c | 25 ++++++++++++++++++++----- arch/x86/kernel/fpu/xstate.h | 4 ++-- 5 files changed, 33 insertions(+), 20 deletions(-) diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c index 3b28c5b25e12..c273669e8a00 100644 --- a/arch/x86/kernel/fpu/core.c +++ b/arch/x86/kernel/fpu/core.c @@ -391,8 +391,6 @@ int fpu_copy_uabi_to_guest_fpstate(struct fpu_guest *gfpu, const void *buf, { struct fpstate *kstate = gfpu->fpstate; const union fpregs_state *ustate = buf; - struct pkru_state *xpkru; - int ret; if (!cpu_feature_enabled(X86_FEATURE_XSAVE)) { if (ustate->xsave.header.xfeatures & ~XFEATURE_MASK_FPSSE) @@ -406,16 +404,16 @@ int fpu_copy_uabi_to_guest_fpstate(struct fpu_guest *gfpu, const void *buf, if (ustate->xsave.header.xfeatures & ~xcr0) return -EINVAL; - ret = copy_uabi_from_kernel_to_xstate(kstate, ustate); - if (ret) - return ret; + /* + * Nullify @vpkru to preserve its current value if PKRU's bit isn't set + * in the header. KVM's odd ABI is to leave PKRU untouched in this + * case (all other components are eventually re-initialized). + * (Not clear that this is actually necessary for compat). + */ + if (!(ustate->xsave.header.xfeatures & XFEATURE_MASK_PKRU)) + vpkru = NULL; - /* Retrieve PKRU if not in init state */ - if (kstate->regs.xsave.header.xfeatures & XFEATURE_MASK_PKRU) { - xpkru = get_xsave_addr(&kstate->regs.xsave, XFEATURE_PKRU); - *vpkru = xpkru->pkru; - } - return 0; + return copy_uabi_from_kernel_to_xstate(kstate, ustate, vpkru); } EXPORT_SYMBOL_GPL(fpu_copy_uabi_to_guest_fpstate); #endif /* CONFIG_KVM */ diff --git a/arch/x86/kernel/fpu/regset.c b/arch/x86/kernel/fpu/regset.c index 75ffaef8c299..6d056b68f4ed 100644 --- a/arch/x86/kernel/fpu/regset.c +++ b/arch/x86/kernel/fpu/regset.c @@ -167,7 +167,7 @@ int xstateregs_set(struct task_struct *target, const struct user_regset *regset, } fpu_force_restore(fpu); - ret = copy_uabi_from_kernel_to_xstate(fpu->fpstate, kbuf ?: tmpbuf); + ret = copy_uabi_from_kernel_to_xstate(fpu->fpstate, kbuf ?: tmpbuf, &target->thread.pkru); out: vfree(tmpbuf); diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c index 91d4b6de58ab..558076dbde5b 100644 --- a/arch/x86/kernel/fpu/signal.c +++ b/arch/x86/kernel/fpu/signal.c @@ -396,7 +396,7 @@ static bool __fpu_restore_sig(void __user *buf, void __user *buf_fx, fpregs = &fpu->fpstate->regs; if (use_xsave() && !fx_only) { - if (copy_sigframe_from_user_to_xstate(fpu->fpstate, buf_fx)) + if (copy_sigframe_from_user_to_xstate(tsk, buf_fx)) return false; } else { if (__copy_from_user(&fpregs->fxsave, buf_fx, diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c index c8340156bfd2..8f14981a3936 100644 --- a/arch/x86/kernel/fpu/xstate.c +++ b/arch/x86/kernel/fpu/xstate.c @@ -1197,7 +1197,7 @@ static int copy_from_buffer(void *dst, unsigned int offset, unsigned int size, static int copy_uabi_to_xstate(struct fpstate *fpstate, const void *kbuf, - const void __user *ubuf) + const void __user *ubuf, u32 *pkru) { struct xregs_state *xsave = &fpstate->regs.xsave; unsigned int offset, size; @@ -1246,6 +1246,21 @@ static int copy_uabi_to_xstate(struct fpstate *fpstate, const void *kbuf, } } + /* + * Update the user protection key storage. Allow KVM to + * pass in a NULL pkru pointer if the mask bit is unset + * for its legacy ABI behavior. + */ + if (pkru) + *pkru = 0; + + if (hdr.xfeatures & XFEATURE_MASK_PKRU) { + struct pkru_state *xpkru; + + xpkru = __raw_xsave_addr(xsave, XFEATURE_PKRU); + *pkru = xpkru->pkru; + } + /* * The state that came in from userspace was user-state only. * Mask all the user states out of 'xfeatures': @@ -1264,9 +1279,9 @@ static int copy_uabi_to_xstate(struct fpstate *fpstate, const void *kbuf, * Convert from a ptrace standard-format kernel buffer to kernel XSAVE[S] * format and copy to the target thread. Used by ptrace and KVM. */ -int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf) +int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf, u32 *pkru) { - return copy_uabi_to_xstate(fpstate, kbuf, NULL); + return copy_uabi_to_xstate(fpstate, kbuf, NULL, pkru); } /* @@ -1274,10 +1289,10 @@ int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf) * XSAVE[S] format and copy to the target thread. This is called from the * sigreturn() and rt_sigreturn() system calls. */ -int copy_sigframe_from_user_to_xstate(struct fpstate *fpstate, +int copy_sigframe_from_user_to_xstate(struct task_struct *tsk, const void __user *ubuf) { - return copy_uabi_to_xstate(fpstate, NULL, ubuf); + return copy_uabi_to_xstate(tsk->thread.fpu.fpstate, NULL, ubuf, &tsk->thread.pkru); } static bool validate_independent_components(u64 mask) diff --git a/arch/x86/kernel/fpu/xstate.h b/arch/x86/kernel/fpu/xstate.h index 5ad47031383b..a4ecb04d8d64 100644 --- a/arch/x86/kernel/fpu/xstate.h +++ b/arch/x86/kernel/fpu/xstate.h @@ -46,8 +46,8 @@ extern void __copy_xstate_to_uabi_buf(struct membuf to, struct fpstate *fpstate, u32 pkru_val, enum xstate_copy_mode copy_mode); extern void copy_xstate_to_uabi_buf(struct membuf to, struct task_struct *tsk, enum xstate_copy_mode mode); -extern int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf); -extern int copy_sigframe_from_user_to_xstate(struct fpstate *fpstate, const void __user *ubuf); +extern int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf, u32 *pkru); +extern int copy_sigframe_from_user_to_xstate(struct task_struct *tsk, const void __user *ubuf); extern void fpu__init_cpu_xstate(void); -- 2.37.2 Changelog since v5: - Avoids a second copy from the uabi buffer as suggested. - Preserves old KVM_SET_XSAVE behavior where leaving the PKRU bit in the XSTATE header results in PKRU remaining unchanged instead of reinitializing it. - Fixed up patch metadata as requested. Changelog since v4: - Selftest additionally checks PKRU readbacks through ptrace. - Selftest flips all PKRU bits (except the default key). Changelog since v3: - The v3 patch is now part 1 of 2. - Adds a selftest in part 2 of 2. Changelog since v2: - Removed now unused variables in fpu_copy_uabi_to_guest_fpstate Changelog since v1: - Handles the error case of copy_to_buffer().

2 years, 1 month

2
4
0 0

[PATCH v3 7/7] KVM: selftests: Add test for AArch32 ID registers

by Oliver Upton

Add a test to assert that KVM handles the AArch64 views of the AArch32 ID registers as RAZ/WI (writable only from userspace). For registers that were already hidden or unallocated, expect RAZ + invariant behavior. Signed-off-by: Oliver Upton <oliver.upton(a)linux.dev> --- tools/testing/selftests/kvm/.gitignore | 1 + tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/aarch64/aarch32_id_regs.c | 169 ++++++++++++++++++ 3 files changed, 171 insertions(+) create mode 100644 tools/testing/selftests/kvm/aarch64/aarch32_id_regs.c diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore index d625a3f83780..87d1a0b1bae0 100644 --- a/tools/testing/selftests/kvm/.gitignore +++ b/tools/testing/selftests/kvm/.gitignore @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only +/aarch64/aarch32_id_regs /aarch64/arch_timer /aarch64/debug-exceptions /aarch64/get-reg-list diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 4c122f1b1737..784abe7f0962 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -144,6 +144,7 @@ TEST_GEN_PROGS_x86_64 += system_counter_offset_test # Compiled outputs used by test targets TEST_GEN_PROGS_EXTENDED_x86_64 += x86_64/nx_huge_pages_test +TEST_GEN_PROGS_aarch64 += aarch64/aarch32_id_regs TEST_GEN_PROGS_aarch64 += aarch64/arch_timer TEST_GEN_PROGS_aarch64 += aarch64/debug-exceptions TEST_GEN_PROGS_aarch64 += aarch64/get-reg-list diff --git a/tools/testing/selftests/kvm/aarch64/aarch32_id_regs.c b/tools/testing/selftests/kvm/aarch64/aarch32_id_regs.c new file mode 100644 index 000000000000..6f9c1f19c7f6 --- /dev/null +++ b/tools/testing/selftests/kvm/aarch64/aarch32_id_regs.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * aarch32_id_regs - Test for ID register behavior on AArch64-only systems + * + * Copyright (c) 2022 Google LLC. + * + * Test that KVM handles the AArch64 views of the AArch32 ID registers as RAZ + * and WI from userspace. + */ + +#include <stdint.h> + +#include "kvm_util.h" +#include "processor.h" +#include "test_util.h" + +#define BAD_ID_REG_VAL 0x1badc0deul + +#define GUEST_ASSERT_REG_RAZ(reg) GUEST_ASSERT_EQ(read_sysreg_s(reg), 0) + +static void guest_main(void) +{ + GUEST_ASSERT_REG_RAZ(SYS_ID_PFR0_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_PFR1_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_DFR0_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_AFR0_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_MMFR0_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_MMFR1_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_MMFR2_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_MMFR3_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_ISAR0_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_ISAR1_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_ISAR2_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_ISAR3_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_ISAR4_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_ISAR5_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_MMFR4_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_ISAR6_EL1); + GUEST_ASSERT_REG_RAZ(SYS_MVFR0_EL1); + GUEST_ASSERT_REG_RAZ(SYS_MVFR1_EL1); + GUEST_ASSERT_REG_RAZ(SYS_MVFR2_EL1); + GUEST_ASSERT_REG_RAZ(sys_reg(3, 0, 0, 3, 3)); + GUEST_ASSERT_REG_RAZ(SYS_ID_PFR2_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_DFR1_EL1); + GUEST_ASSERT_REG_RAZ(SYS_ID_MMFR5_EL1); + GUEST_ASSERT_REG_RAZ(sys_reg(3, 0, 0, 3, 7)); + + GUEST_DONE(); +} + +static void test_guest_raz(struct kvm_vcpu *vcpu) +{ + struct ucall uc; + + vcpu_run(vcpu); + + switch (get_ucall(vcpu, &uc)) { + case UCALL_ABORT: + REPORT_GUEST_ASSERT(uc); + break; + case UCALL_DONE: + break; + default: + TEST_FAIL("Unexpected ucall: %lu", uc.cmd); + } +} + +static uint64_t raz_wi_reg_ids[] = { + KVM_ARM64_SYS_REG(SYS_ID_PFR0_EL1), + KVM_ARM64_SYS_REG(SYS_ID_PFR1_EL1), + KVM_ARM64_SYS_REG(SYS_ID_DFR0_EL1), + KVM_ARM64_SYS_REG(SYS_ID_MMFR0_EL1), + KVM_ARM64_SYS_REG(SYS_ID_MMFR1_EL1), + KVM_ARM64_SYS_REG(SYS_ID_MMFR2_EL1), + KVM_ARM64_SYS_REG(SYS_ID_MMFR3_EL1), + KVM_ARM64_SYS_REG(SYS_ID_ISAR0_EL1), + KVM_ARM64_SYS_REG(SYS_ID_ISAR1_EL1), + KVM_ARM64_SYS_REG(SYS_ID_ISAR2_EL1), + KVM_ARM64_SYS_REG(SYS_ID_ISAR3_EL1), + KVM_ARM64_SYS_REG(SYS_ID_ISAR4_EL1), + KVM_ARM64_SYS_REG(SYS_ID_ISAR5_EL1), + KVM_ARM64_SYS_REG(SYS_ID_MMFR4_EL1), + KVM_ARM64_SYS_REG(SYS_ID_ISAR6_EL1), + KVM_ARM64_SYS_REG(SYS_MVFR0_EL1), + KVM_ARM64_SYS_REG(SYS_MVFR1_EL1), + KVM_ARM64_SYS_REG(SYS_MVFR2_EL1), + KVM_ARM64_SYS_REG(SYS_ID_PFR2_EL1), + KVM_ARM64_SYS_REG(SYS_ID_MMFR5_EL1), +}; + +static void test_user_raz_wi(struct kvm_vcpu *vcpu) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(raz_wi_reg_ids); i++) { + uint64_t reg_id = raz_wi_reg_ids[i]; + uint64_t val; + + vcpu_get_reg(vcpu, reg_id, &val); + ASSERT_EQ(val, 0); + + /* + * Expect the ioctl to succeed with no effect on the register + * value. + */ + vcpu_set_reg(vcpu, reg_id, BAD_ID_REG_VAL); + + vcpu_get_reg(vcpu, reg_id, &val); + ASSERT_EQ(val, 0); + } +} + +static uint64_t raz_invariant_reg_ids[] = { + KVM_ARM64_SYS_REG(SYS_ID_AFR0_EL1), + KVM_ARM64_SYS_REG(sys_reg(3, 0, 0, 3, 3)), + KVM_ARM64_SYS_REG(SYS_ID_DFR1_EL1), + KVM_ARM64_SYS_REG(sys_reg(3, 0, 0, 3, 7)), +}; + +static void test_user_raz_invariant(struct kvm_vcpu *vcpu) +{ + int i, r; + + for (i = 0; i < ARRAY_SIZE(raz_invariant_reg_ids); i++) { + uint64_t reg_id = raz_invariant_reg_ids[i]; + uint64_t val; + + vcpu_get_reg(vcpu, reg_id, &val); + ASSERT_EQ(val, 0); + + r = __vcpu_set_reg(vcpu, reg_id, BAD_ID_REG_VAL); + TEST_ASSERT(r < 0 && errno == EINVAL, + "unexpected KVM_SET_ONE_REG error: r=%d, errno=%d", r, errno); + + vcpu_get_reg(vcpu, reg_id, &val); + ASSERT_EQ(val, 0); + } +} + + + +static bool vcpu_aarch64_only(struct kvm_vcpu *vcpu) +{ + uint64_t val, el0; + + vcpu_get_reg(vcpu, KVM_ARM64_SYS_REG(SYS_ID_AA64PFR0_EL1), &val); + + el0 = (val & ARM64_FEATURE_MASK(ID_AA64PFR0_EL0)) >> ID_AA64PFR0_EL0_SHIFT; + return el0 == ID_AA64PFR0_ELx_64BIT_ONLY; +} + +int main(void) +{ + struct kvm_vcpu *vcpu; + struct kvm_vm *vm; + + vm = vm_create_with_one_vcpu(&vcpu, guest_main); + + TEST_REQUIRE(vcpu_aarch64_only(vcpu)); + + ucall_init(vm, NULL); + + test_user_raz_wi(vcpu); + test_user_raz_invariant(vcpu); + test_guest_raz(vcpu); + + ucall_uninit(vm); + kvm_vm_free(vm); +} -- 2.37.2.789.g6183377224-goog

2 years, 1 month

1
0
0 0

make run_tests -C proc: proc-pid-vm assertion failed.

by Jie2x Zhou

hi, The test error is caused by g_vsyscall set failed. Error output: selftests: proc: proc-pid-vm proc-pid-vm: proc-pid-vm.c:389: main: Assertion `rv == len' failed. Aborted g_vsyscall is set to 0. In proc-pid-vm.c: /* * 0: vsyscall VMA doesn't exist vsyscall=none * 1: vsyscall VMA is r-xp vsyscall=emulate * 2: vsyscall VMA is --xp vsyscall=xonly */ static int g_vsyscall; static const char *str_vsyscall; static const char str_vsyscall_0[] = ""; static const char str_vsyscall_1[] = "ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]\n"; static const char str_vsyscall_2[] = "ffffffffff600000-ffffffffff601000 --xp 00000000 00:00 0 [vsyscall]\n"; The /proc/%u/maps output is: buf=100000000-100001000 r-xp 00000000 00:2d 2 /tmp/#2 (deleted) ffffffffff600000-ffffffffff601000 --xp 00000000 00:00 0 [vsyscall] So the g_vsyscall should be 2 according to commentary(2: vsyscall VMA is --xp). Is it a bug? best regards,

2 years, 1 month

3
2
0 0

[PATCH] selftests/intel_pstate: fix build for ARCH=x86_64

by Ricardo Cañuelo

Handle the scenario where the build is launched with the ARCH envvar defined as x86_64. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo(a)collabora.com> --- tools/testing/selftests/intel_pstate/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/intel_pstate/Makefile b/tools/testing/selftests/intel_pstate/Makefile index 39f0fa2a8fd6..05d66ef50c97 100644 --- a/tools/testing/selftests/intel_pstate/Makefile +++ b/tools/testing/selftests/intel_pstate/Makefile @@ -2,10 +2,10 @@ CFLAGS := $(CFLAGS) -Wall -D_GNU_SOURCE LDLIBS += -lm -uname_M := $(shell uname -m 2>/dev/null || echo not) -ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/) +ARCH ?= $(shell uname -m 2>/dev/null || echo not) +ARCH_PROCESSED := $(shell echo $(ARCH) | sed -e s/i.86/x86/ -e s/x86_64/x86/) -ifeq (x86,$(ARCH)) +ifeq (x86,$(ARCH_PROCESSED)) TEST_GEN_FILES := msr aperf endif -- 2.25.1

2 years, 1 month

1
0
0 0

[PATCH v2 1/5] selftests/sgx: Retry the ioctl()'s returned with EAGAIN

by Jarkko Sakkinen

From: Haitao Huang <haitao.huang(a)linux.intel.com> For EMODT and EREMOVE ioctl()'s with a large range, kernel may not finish in one shot and return EAGAIN error code and count of bytes of EPC pages on that operations are finished successfully. Change the unclobbered_vdso_oversubscribed_remove test to rerun the ioctl()'s in a loop, updating offset and length using the byte count returned in each iteration. Fixes: 6507cce561b4 ("selftests/sgx: Page removal stress test") Signed-off-by: Haitao Huang <haitao.huang(a)linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko(a)kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko(a)kernel.org> --- v3: * Added a fixes tag. The bug is in v6.0 patches. * Added my tested-by (the bug reproduced in my NUC often). v2: * Changed branching in EAGAIN condition so that else branch is not required. * Addressed Reinette's feedback: --- tools/testing/selftests/sgx/main.c | 42 ++++++++++++++++++++++++------ 1 file changed, 34 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c index 9820b3809c69..59cca806eda1 100644 --- a/tools/testing/selftests/sgx/main.c +++ b/tools/testing/selftests/sgx/main.c @@ -390,6 +390,7 @@ TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900) struct encl_segment *heap; unsigned long total_mem; int ret, errno_save; + unsigned long count; unsigned long addr; unsigned long i; @@ -453,16 +454,30 @@ TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900) modt_ioc.offset = heap->offset; modt_ioc.length = heap->size; modt_ioc.page_type = SGX_PAGE_TYPE_TRIM; - + count = 0; TH_LOG("Changing type of %zd bytes to trimmed may take a while ...", heap->size); - ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &modt_ioc); - errno_save = ret == -1 ? errno : 0; + do { + ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &modt_ioc); + + errno_save = ret == -1 ? errno : 0; + if (errno_save != EAGAIN) + break; + + EXPECT_EQ(modt_ioc.result, 0); + + count += modt_ioc.count; + modt_ioc.offset += modt_ioc.count; + modt_ioc.length -= modt_ioc.count; + modt_ioc.result = 0; + modt_ioc.count = 0; + } while (modt_ioc.length != 0); EXPECT_EQ(ret, 0); EXPECT_EQ(errno_save, 0); EXPECT_EQ(modt_ioc.result, 0); - EXPECT_EQ(modt_ioc.count, heap->size); + count += modt_ioc.count; + EXPECT_EQ(count, heap->size); /* EACCEPT all removed pages. */ addr = self->encl.encl_base + heap->offset; @@ -490,15 +505,26 @@ TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900) remove_ioc.offset = heap->offset; remove_ioc.length = heap->size; - + count = 0; TH_LOG("Removing %zd bytes from enclave may take a while ...", heap->size); - ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_REMOVE_PAGES, &remove_ioc); - errno_save = ret == -1 ? errno : 0; + do { + ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_REMOVE_PAGES, &remove_ioc); + + errno_save = ret == -1 ? errno : 0; + if (errno_save != EAGAIN) + break; + + count += remove_ioc.count; + remove_ioc.offset += remove_ioc.count; + remove_ioc.length -= remove_ioc.count; + remove_ioc.count = 0; + } while (remove_ioc.length != 0); EXPECT_EQ(ret, 0); EXPECT_EQ(errno_save, 0); - EXPECT_EQ(remove_ioc.count, heap->size); + count += remove_ioc.count; + EXPECT_EQ(count, heap->size); } TEST_F(enclave, clobbered_vdso) -- 2.37.2

2 years, 1 month

2
7
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror