- Linux-kselftest-mirror - lists.linaro.org

[PATCH v2 net-next] selftests: forwarding: add Per-Stream Filtering and Policing test for Ocelot

by Vladimir Oltean

The Felix VSC9959 switch in NXP LS1028A supports the tc-gate action which enforced time-based access control per stream. A stream as seen by this switch is identified by {MAC DA, VID}. We use the standard forwarding selftest topology with 2 host interfaces and 2 switch interfaces. The host ports must require timestamping non-IP packets and supporting tc-etf offload, for isochron to work. The isochron program monitors network sync status (ptp4l, phc2sys) and deterministically transmits packets to the switch such that the tc-gate action either (a) always accepts them based on its schedule, or (b) always drops them. I tried to keep as much of the logic that isn't specific to the NXP LS1028A in a new tsn_lib.sh, for future reuse. This covers synchronization using ptp4l and phc2sys, and isochron. The cycle-time chosen for this selftest isn't particularly impressive (and the focus is the functionality of the switch), but I didn't really know what to do better, considering that it will mostly be run during debugging sessions, various kernel bloatware would be enabled, like lockdep, KASAN, etc, and we certainly can't run any races with those on. I tried to look through the kselftest framework for other real time applications and didn't really find any, so I'm not sure how better to prepare the environment in case we want to go for a lower cycle time. At the moment, the only thing the selftest is ensuring is that dynamic frequency scaling is disabled on the CPU that isochron runs on. It would probably be useful to have a blacklist of kernel config options (checked through zcat /proc/config.gz) and some cyclictest scripts to run beforehand, but I saw none of those. Signed-off-by: Vladimir Oltean <vladimir.oltean(a)nxp.com> --- v1->v2: - fix an off-by-one bug introduced at the last minute regarding which tc-mqprio queue was used for tc-etf and SO_TXTIME - introduce debugging for packets incorrectly received / incorrectly dropped based on "isochron report" - make the tsn_lib.sh dependency on isochron and linuxptp optional via REQUIRE_ISOCHRON and REQUIRE_LINUXPTP - avoid errors when CONFIG_CPU_FREQ is disabled - consistently use SCHED_FIFO instead of SCHED_RR for the isochron receiver .../selftests/drivers/net/ocelot/psfp.sh | 327 ++++++++++++++++++ .../selftests/net/forwarding/tsn_lib.sh | 235 +++++++++++++ 2 files changed, 562 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/ocelot/psfp.sh create mode 100644 tools/testing/selftests/net/forwarding/tsn_lib.sh diff --git a/tools/testing/selftests/drivers/net/ocelot/psfp.sh b/tools/testing/selftests/drivers/net/ocelot/psfp.sh new file mode 100755 index 000000000000..5a5cee92c665 --- /dev/null +++ b/tools/testing/selftests/drivers/net/ocelot/psfp.sh @@ -0,0 +1,327 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2021-2022 NXP + +# Note: On LS1028A, in lack of enough user ports, this setup requires patching +# the device tree to use the second CPU port as a user port + +WAIT_TIME=1 +NUM_NETIFS=4 +STABLE_MAC_ADDRS=yes +NETIF_CREATE=no +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/tsn_lib.sh + +UDS_ADDRESS_H1="/var/run/ptp4l_h1" +UDS_ADDRESS_SWP1="/var/run/ptp4l_swp1" + +# Tunables +NUM_PKTS=1000 +STREAM_VID=100 +STREAM_PRIO=6 +# Use a conservative cycle of 10 ms to allow the test to still pass when the +# kernel has some extra overhead like lockdep etc +CYCLE_TIME_NS=10000000 +# Create two Gate Control List entries, one OPEN and one CLOSE, of equal +# durations +GATE_DURATION_NS=$((${CYCLE_TIME_NS} / 2)) +# Give 2/3 of the cycle time to user space and 1/3 to the kernel +FUDGE_FACTOR=$((${CYCLE_TIME_NS} / 3)) +# Shift the isochron base time by half the gate time, so that packets are +# always received by swp1 close to the middle of the time slot, to minimize +# inaccuracies due to network sync +SHIFT_TIME_NS=$((${GATE_DURATION_NS} / 2)) + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +# Chain number exported by the ocelot driver for +# Per-Stream Filtering and Policing filters +PSFP() +{ + echo 30000 +} + +psfp_chain_create() +{ + local if_name=$1 + + tc qdisc add dev $if_name clsact + + tc filter add dev $if_name ingress chain 0 pref 49152 flower \ + skip_sw action goto chain $(PSFP) +} + +psfp_chain_destroy() +{ + local if_name=$1 + + tc qdisc del dev $if_name clsact +} + +psfp_filter_check() +{ + local expected=$1 + local packets="" + local drops="" + local stats="" + + stats=$(tc -j -s filter show dev ${swp1} ingress chain $(PSFP) pref 1) + packets=$(echo ${stats} | jq ".[1].options.actions[].stats.packets") + drops=$(echo ${stats} | jq ".[1].options.actions[].stats.drops") + + if ! [ "${packets}" = "${expected}" ]; then + printf "Expected filter to match on %d packets but matched on %d instead\n" \ + "${expected}" "${packets}" + fi + + echo "Hardware filter reports ${drops} drops" +} + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +switch_create() +{ + local h2_mac_addr=$(mac_get $h2) + + ip link set ${swp1} up + ip link set ${swp2} up + + ip link add br0 type bridge vlan_filtering 1 + ip link set ${swp1} master br0 + ip link set ${swp2} master br0 + ip link set br0 up + + bridge vlan add dev ${swp2} vid ${STREAM_VID} + bridge vlan add dev ${swp1} vid ${STREAM_VID} + # PSFP on Ocelot requires the filter to also be added to the bridge + # FDB, and not be removed + bridge fdb add dev ${swp2} \ + ${h2_mac_addr} vlan ${STREAM_VID} static master + + psfp_chain_create ${swp1} + + tc filter add dev ${swp1} ingress chain $(PSFP) pref 1 \ + protocol 802.1Q flower skip_sw \ + dst_mac ${h2_mac_addr} vlan_id ${STREAM_VID} \ + action gate base-time 0.000000000 \ + sched-entry OPEN ${GATE_DURATION_NS} -1 -1 \ + sched-entry CLOSE ${GATE_DURATION_NS} -1 -1 +} + +switch_destroy() +{ + psfp_chain_destroy ${swp1} + ip link del br0 +} + +txtime_setup() +{ + local if_name=$1 + + tc qdisc add dev ${if_name} clsact + # Classify PTP on TC 7 and isochron on TC 6 + tc filter add dev ${if_name} egress protocol 0x88f7 \ + flower action skbedit priority 7 + tc filter add dev ${if_name} egress protocol 802.1Q \ + flower vlan_ethtype 0xdead action skbedit priority 6 + tc qdisc add dev ${if_name} handle 100: parent root mqprio num_tc 8 \ + queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ + map 0 1 2 3 4 5 6 7 \ + hw 1 + # Set up TC 6 for SO_TXTIME. tc-mqprio queues count from 1. + tc qdisc replace dev ${if_name} parent 100:$((${STREAM_PRIO} + 1)) etf \ + clockid CLOCK_TAI offload delta ${FUDGE_FACTOR} +} + +txtime_cleanup() +{ + local if_name=$1 + + tc qdisc del dev ${if_name} root + tc qdisc del dev ${if_name} clsact +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create + + txtime_setup ${h1} + + # Set up swp1 as a master PHC for h1, synchronized to the local + # CLOCK_REALTIME. + phc2sys_start ${swp1} ${UDS_ADDRESS_SWP1} + + # Assumption true for LS1028A: h1 and h2 use the same PHC. So by + # synchronizing h1 to swp1 via PTP, h2 is also implicitly synchronized + # to swp1 (and both to CLOCK_REALTIME). + ptp4l_start ${h1} true ${UDS_ADDRESS_H1} + ptp4l_start ${swp1} false ${UDS_ADDRESS_SWP1} + + # Make sure there are no filter matches at the beginning of the test + psfp_filter_check 0 +} + +cleanup() +{ + pre_cleanup + + ptp4l_stop ${swp1} + ptp4l_stop ${h1} + phc2sys_stop + isochron_recv_stop + + txtime_cleanup ${h1} + + h2_destroy + h1_destroy + switch_destroy + + vrf_cleanup +} + +debug_incorrectly_dropped_packets() +{ + local isochron_dat=$1 + local dropped_seqids + local seqid + + echo "Packets incorrectly dropped:" + + dropped_seqids=$(isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u RX hw %T\n" \ + --printf-args "qR" | \ + grep 'RX hw 0.000000000' | \ + awk '{print $1}') + + for seqid in ${dropped_seqids}; do + isochron report \ + --input-file "${isochron_dat}" \ + --start ${seqid} --stop ${seqid} \ + --printf-format "seqid %u scheduled for %T, HW TX timestamp %T\n" \ + --printf-args "qST" + done +} + +debug_incorrectly_received_packets() +{ + local isochron_dat=$1 + + echo "Packets incorrectly received:" + + isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "seqid %u scheduled for %T, HW TX timestamp %T, HW RX timestamp %T\n" \ + --printf-args "qSTR" | + grep -v 'HW RX timestamp 0.000000000' +} + +run_test() +{ + local base_time=$1 + local expected=$2 + local test_name=$3 + local debug=$4 + local isochron_dat="$(mktemp)" + local extra_args="" + local received + + isochron_do \ + "${h1}" \ + "${h2}" \ + "${UDS_ADDRESS_H1}" \ + "" \ + "${base_time}" \ + "${CYCLE_TIME_NS}" \ + "${SHIFT_TIME_NS}" \ + "${NUM_PKTS}" \ + "${STREAM_VID}" \ + "${STREAM_PRIO}" \ + "" \ + "${isochron_dat}" + + # Count all received packets by looking at the non-zero RX timestamps + received=$(isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u\n" --printf-args "R" | \ + grep -w -v '0' | wc -l) + + if [ "${received}" = "${expected}" ]; then + RET=0 + else + RET=1 + echo "Expected isochron to receive ${expected} packets but received ${received}" + fi + + log_test "${test_name}" + + if [ "$RET" = "1" ]; then + ${debug} "${isochron_dat}" + fi + + rm ${isochron_dat} 2> /dev/null +} + +test_gate_in_band() +{ + # Send packets in-band with the OPEN gate entry + run_test 0.000000000 ${NUM_PKTS} "In band" \ + debug_incorrectly_dropped_packets + + psfp_filter_check ${NUM_PKTS} +} + +test_gate_out_of_band() +{ + # Send packets in-band with the CLOSE gate entry + run_test 0.005000000 0 "Out of band" \ + debug_incorrectly_received_packets + + psfp_filter_check $((2 * ${NUM_PKTS})) +} + +trap cleanup EXIT + +ALL_TESTS=" + test_gate_in_band + test_gate_out_of_band +" + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/tsn_lib.sh b/tools/testing/selftests/net/forwarding/tsn_lib.sh new file mode 100644 index 000000000000..60a1423e8116 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tsn_lib.sh @@ -0,0 +1,235 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2021-2022 NXP + +REQUIRE_ISOCHRON=${REQUIRE_ISOCHRON:=yes} +REQUIRE_LINUXPTP=${REQUIRE_LINUXPTP:=yes} + +# Tunables +UTC_TAI_OFFSET=37 +ISOCHRON_CPU=1 + +if [[ "$REQUIRE_ISOCHRON" = "yes" ]]; then + # https://github.com/vladimiroltean/tsn-scripts + # WARNING: isochron versions pre-1.0 are unstable, + # always use the latest version + require_command isochron +fi +if [[ "$REQUIRE_LINUXPTP" = "yes" ]]; then + require_command phc2sys + require_command ptp4l +fi + +phc2sys_start() +{ + local if_name=$1 + local uds_address=$2 + local extra_args="" + + if ! [ -z "${uds_address}" ]; then + extra_args="${extra_args} -z ${uds_address}" + fi + + phc2sys_log="$(mktemp)" + + chrt -f 10 phc2sys -m \ + -c ${if_name} \ + -s CLOCK_REALTIME \ + -O ${UTC_TAI_OFFSET} \ + --step_threshold 0.00002 \ + --first_step_threshold 0.00002 \ + ${extra_args} \ + > "${phc2sys_log}" 2>&1 & + phc2sys_pid=$! + + echo "phc2sys logs to ${phc2sys_log} and has pid ${phc2sys_pid}" + + sleep 1 +} + +phc2sys_stop() +{ + { kill ${phc2sys_pid} && wait ${phc2sys_pid}; } 2> /dev/null + rm "${phc2sys_log}" 2> /dev/null +} + +ptp4l_start() +{ + local if_name=$1 + local slave_only=$2 + local uds_address=$3 + local log="ptp4l_log_${if_name}" + local pid="ptp4l_pid_${if_name}" + local extra_args="" + + if [ "${slave_only}" = true ]; then + extra_args="${extra_args} -s" + fi + + # declare dynamic variables ptp4l_log_${if_name} and ptp4l_pid_${if_name} + # as global, so that they can be referenced later + declare -g "${log}=$(mktemp)" + + chrt -f 10 ptp4l -m -2 -P \ + -i ${if_name} \ + --step_threshold 0.00002 \ + --first_step_threshold 0.00002 \ + --tx_timestamp_timeout 100 \ + --uds_address="${uds_address}" \ + ${extra_args} \ + > "${!log}" 2>&1 & + declare -g "${pid}=$!" + + echo "ptp4l for interface ${if_name} logs to ${!log} and has pid ${!pid}" + + sleep 1 +} + +ptp4l_stop() +{ + local if_name=$1 + local log="ptp4l_log_${if_name}" + local pid="ptp4l_pid_${if_name}" + + { kill ${!pid} && wait ${!pid}; } 2> /dev/null + rm "${!log}" 2> /dev/null +} + +cpufreq_max() +{ + local cpu=$1 + local freq="cpu${cpu}_freq" + local governor="cpu${cpu}_governor" + + # Kernel may be compiled with CONFIG_CPU_FREQ disabled + if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then + return + fi + + # declare dynamic variables cpu${cpu}_freq and cpu${cpu}_governor as + # global, so they can be referenced later + declare -g "${freq}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq)" + declare -g "${governor}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor)" + + cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_max_freq > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq + echo -n "performance" > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor +} + +cpufreq_restore() +{ + local cpu=$1 + local freq="cpu${cpu}_freq" + local governor="cpu${cpu}_governor" + + if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then + return + fi + + echo "${!freq}" > /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq + echo -n "${!governor}" > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor +} + +isochron_recv_start() +{ + local if_name=$1 + local uds=$2 + local extra_args=$3 + + if ! [ -z "${uds}" ]; then + extra_args="--unix-domain-socket ${uds}" + fi + + isochron rcv \ + --interface ${if_name} \ + --sched-priority 98 \ + --sched-fifo \ + --utc-tai-offset ${UTC_TAI_OFFSET} \ + --quiet \ + ${extra_args} & \ + isochron_pid=$! + + sleep 1 +} + +isochron_recv_stop() +{ + { kill ${isochron_pid} && wait ${isochron_pid}; } 2> /dev/null +} + +isochron_do() +{ + local sender_if_name=$1; shift + local receiver_if_name=$1; shift + local sender_uds=$1; shift + local receiver_uds=$1; shift + local base_time=$1; shift + local cycle_time=$1; shift + local shift_time=$1; shift + local num_pkts=$1; shift + local vid=$1; shift + local priority=$1; shift + local dst_ip=$1; shift + local isochron_dat=$1; shift + local extra_args="" + local receiver_extra_args="" + local vrf="$(master_name_get ${sender_if_name})" + local use_l2="true" + + if ! [ -z "${dst_ip}" ]; then + use_l2="false" + fi + + if ! [ -z "${vrf}" ]; then + dst_ip="${dst_ip}%${vrf}" + fi + + if ! [ -z "${vid}" ]; then + vid="--vid=${vid}" + fi + + if [ -z "${receiver_uds}" ]; then + extra_args="${extra_args} --omit-remote-sync" + fi + + if ! [ -z "${shift_time}" ]; then + extra_args="${extra_args} --shift-time=${shift_time}" + fi + + if [ "${use_l2}" = "true" ]; then + extra_args="${extra_args} --l2 --etype=0xdead ${vid}" + receiver_extra_args="--l2 --etype=0xdead" + else + extra_args="${extra_args} --l4 --ip-destination=${dst_ip}" + receiver_extra_args="--l4" + fi + + cpufreq_max ${ISOCHRON_CPU} + + isochron_recv_start "${h2}" "${receiver_uds}" "${receiver_extra_args}" + + isochron send \ + --interface ${sender_if_name} \ + --unix-domain-socket ${sender_uds} \ + --priority ${priority} \ + --base-time ${base_time} \ + --cycle-time ${cycle_time} \ + --num-frames ${num_pkts} \ + --frame-size 64 \ + --txtime \ + --utc-tai-offset ${UTC_TAI_OFFSET} \ + --cpu-mask $((1 << ${ISOCHRON_CPU})) \ + --sched-fifo \ + --sched-priority 98 \ + --client 127.0.0.1 \ + --sync-threshold 5000 \ + --output-file ${isochron_dat} \ + ${extra_args} \ + --quiet + + isochron_recv_stop + + cpufreq_restore ${ISOCHRON_CPU} +} -- 2.25.1

2 years, 4 months

5
13
0 0

[PATCH bpf-next] Fix typos in selftest/bpf files

by Taichi Nishimura

Run spell checker on files in selftest/bpf and fixed typos. Signed-off-by: Taichi Nishimura <awkrail01(a)gmail.com> --- tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c | 2 +- tools/testing/selftests/bpf/prog_tests/trampoline_count.c | 2 +- .../testing/selftests/bpf/progs/btf_dump_test_case_syntax.c | 2 +- tools/testing/selftests/bpf/progs/dynptr_fail.c | 2 +- tools/testing/selftests/bpf/progs/strobemeta.h | 2 +- tools/testing/selftests/bpf/progs/test_cls_redirect.c | 6 +++--- tools/testing/selftests/bpf/progs/test_subprogs.c | 2 +- tools/testing/selftests/bpf/progs/test_xdp_vlan.c | 2 +- tools/testing/selftests/bpf/test_cpp.cpp | 2 +- tools/testing/selftests/bpf/veristat.c | 4 ++-- 10 files changed, 13 insertions(+), 13 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c b/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c index eb2feaac81fe..653b0a20fab9 100644 --- a/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c +++ b/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c @@ -488,7 +488,7 @@ static void run_test(struct migrate_reuseport_test_case *test_case, goto close_servers; } - /* Tie requests to the first four listners */ + /* Tie requests to the first four listeners */ err = start_clients(test_case); if (!ASSERT_OK(err, "start_clients")) goto close_clients; diff --git a/tools/testing/selftests/bpf/prog_tests/trampoline_count.c b/tools/testing/selftests/bpf/prog_tests/trampoline_count.c index 8fd4c0d78089..e91d0d1769f1 100644 --- a/tools/testing/selftests/bpf/prog_tests/trampoline_count.c +++ b/tools/testing/selftests/bpf/prog_tests/trampoline_count.c @@ -79,7 +79,7 @@ void serial_test_trampoline_count(void) if (!ASSERT_EQ(link, NULL, "ptr_is_null")) goto cleanup; - /* and finaly execute the probe */ + /* and finally execute the probe */ prog_fd = bpf_program__fd(prog); if (!ASSERT_GE(prog_fd, 0, "bpf_program__fd")) goto cleanup; diff --git a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c index 26fffb02ed10..ad21ee8c7e23 100644 --- a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c +++ b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c @@ -84,7 +84,7 @@ typedef void (*printf_fn_t)(const char *, ...); * typedef int (*fn_t)(int); * typedef char * const * (*fn_ptr2_t)(s_t, fn_t); * - * - `fn_complext_t`: pointer to a function returning struct and accepting + * - `fn_complex_t`: pointer to a function returning struct and accepting * union and struct. All structs and enum are anonymous and defined inline. * * - `signal_t: pointer to a function accepting a pointer to a function as an diff --git a/tools/testing/selftests/bpf/progs/dynptr_fail.c b/tools/testing/selftests/bpf/progs/dynptr_fail.c index 5950ad6ec2e6..aa5b69354b91 100644 --- a/tools/testing/selftests/bpf/progs/dynptr_fail.c +++ b/tools/testing/selftests/bpf/progs/dynptr_fail.c @@ -630,7 +630,7 @@ static int release_twice_callback_fn(__u32 index, void *data) } /* Test that releasing a dynptr twice, where one of the releases happens - * within a calback function, fails + * within a callback function, fails */ SEC("?raw_tp") __failure __msg("arg 1 is an unacquired reference") diff --git a/tools/testing/selftests/bpf/progs/strobemeta.h b/tools/testing/selftests/bpf/progs/strobemeta.h index 753718595c26..e562be6356f3 100644 --- a/tools/testing/selftests/bpf/progs/strobemeta.h +++ b/tools/testing/selftests/bpf/progs/strobemeta.h @@ -135,7 +135,7 @@ struct strobe_value_loc { * tpidr_el0 for aarch64). * TLS_IMM_EXEC: absolute address of GOT entry containing offset * from thread pointer; - * TLS_GENERAL_DYN: absolute addres of double GOT entry + * TLS_GENERAL_DYN: absolute address of double GOT entry * containing tls_index_t struct; */ int64_t offset; diff --git a/tools/testing/selftests/bpf/progs/test_cls_redirect.c b/tools/testing/selftests/bpf/progs/test_cls_redirect.c index 2833ad722cb7..66b304982245 100644 --- a/tools/testing/selftests/bpf/progs/test_cls_redirect.c +++ b/tools/testing/selftests/bpf/progs/test_cls_redirect.c @@ -600,7 +600,7 @@ static INLINING ret_t get_next_hop(buf_t *pkt, encap_headers_t *encap, return TC_ACT_SHOT; } - /* Skip the remainig next hops (may be zero). */ + /* Skip the remaining next hops (may be zero). */ return skip_next_hops(pkt, encap->unigue.hop_count - encap->unigue.next_hop - 1); } @@ -610,8 +610,8 @@ static INLINING ret_t get_next_hop(buf_t *pkt, encap_headers_t *encap, * * fill_tuple(&t, foo, sizeof(struct iphdr), 123, 321) * - * clang will substitue a costant for sizeof, which allows the verifier - * to track it's value. Based on this, it can figure out the constant + * clang will substitute a constant for sizeof, which allows the verifier + * to track its value. Based on this, it can figure out the constant * return value, and calling code works while still being "generic" to * IPv4 and IPv6. */ diff --git a/tools/testing/selftests/bpf/progs/test_subprogs.c b/tools/testing/selftests/bpf/progs/test_subprogs.c index f8e9256cf18d..a8d602d7c88a 100644 --- a/tools/testing/selftests/bpf/progs/test_subprogs.c +++ b/tools/testing/selftests/bpf/progs/test_subprogs.c @@ -47,7 +47,7 @@ static __noinline int sub5(int v) return sub1(v) - 1; /* compensates sub1()'s + 1 */ } -/* unfortunately verifier rejects `struct task_struct *t` as an unkown pointer +/* unfortunately verifier rejects `struct task_struct *t` as an unknown pointer * type, so we need to accept pointer as integer and then cast it inside the * function */ diff --git a/tools/testing/selftests/bpf/progs/test_xdp_vlan.c b/tools/testing/selftests/bpf/progs/test_xdp_vlan.c index cdf3c48d6cbb..4ddcb6dfe500 100644 --- a/tools/testing/selftests/bpf/progs/test_xdp_vlan.c +++ b/tools/testing/selftests/bpf/progs/test_xdp_vlan.c @@ -98,7 +98,7 @@ bool parse_eth_frame(struct ethhdr *eth, void *data_end, struct parse_pkt *pkt) return true; } -/* Hint, VLANs are choosen to hit network-byte-order issues */ +/* Hint, VLANs are chosen to hit network-byte-order issues */ #define TESTVLAN 4011 /* 0xFAB */ // #define TO_VLAN 4000 /* 0xFA0 (hint 0xOA0 = 160) */ diff --git a/tools/testing/selftests/bpf/test_cpp.cpp b/tools/testing/selftests/bpf/test_cpp.cpp index 0bd9990e83fa..f4936834f76f 100644 --- a/tools/testing/selftests/bpf/test_cpp.cpp +++ b/tools/testing/selftests/bpf/test_cpp.cpp @@ -91,7 +91,7 @@ static void try_skeleton_template() skel.detach(); - /* destructor will destory underlying skeleton */ + /* destructor will destroy underlying skeleton */ } int main(int argc, char *argv[]) diff --git a/tools/testing/selftests/bpf/veristat.c b/tools/testing/selftests/bpf/veristat.c index f961b49b8ef4..83231456d3c5 100644 --- a/tools/testing/selftests/bpf/veristat.c +++ b/tools/testing/selftests/bpf/veristat.c @@ -144,7 +144,7 @@ static struct env { struct verif_stats *prog_stats; int prog_stat_cnt; - /* baseline_stats is allocated and used only in comparsion mode */ + /* baseline_stats is allocated and used only in comparison mode */ struct verif_stats *baseline_stats; int baseline_stat_cnt; @@ -882,7 +882,7 @@ static int process_obj(const char *filename) * that BPF object file is incomplete and has to be statically * linked into a final BPF object file; instead of bailing * out, report it into stderr, mark it as skipped, and - * proceeed + * proceed */ fprintf(stderr, "Failed to open '%s': %d\n", filename, -errno); env.files_skipped++; -- 2.25.1

2 years, 4 months

3
2
0 0

[Patch] [testing][wireguard] Remove unneeded version.h include pointed out by 'make versioncheck'

by Jesper Juhl

From e2fa4955c676960d0809e4afe8273075c94451c9 Mon Sep 17 00:00:00 2001 From: Jesper Juhl <jesperjuhl76(a)gmail.com> Date: Mon, 13 Feb 2023 02:58:36 +0100 Subject: [PATCH 06/12] [testing][wireguard] Remove unneeded version.h include pointed out by 'make versioncheck' Signed-off-by: Jesper Juhl <jesperjuhl76(a)gmail.com> --- tools/testing/selftests/wireguard/qemu/init.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/wireguard/qemu/init.c b/tools/testing/selftests/wireguard/qemu/init.c index 3e49924dd77e..20d8d3192f75 100644 --- a/tools/testing/selftests/wireguard/qemu/init.c +++ b/tools/testing/selftests/wireguard/qemu/init.c @@ -24,7 +24,6 @@ #include <sys/sysmacros.h> #include <sys/random.h> #include <linux/random.h> -#include <linux/version.h> __attribute__((noreturn)) static void poweroff(void) { -- 2.39.2

2 years, 4 months

3
2
0 0

[PATCH RFC net-next v2 0/3] vsock: add support for sockmap

by Bobby Eshleman

Add support for sockmap to vsock. We're testing usage of vsock as a way to redirect guest-local UDS requests to the host and this patch series greatly improves the performance of such a setup. Compared to copying packets via userspace, this improves throughput by 121% in basic testing. Tested as follows. Setup: guest unix dgram sender -> guest vsock redirector -> host vsock server Threads: 1 Payload: 64k No sockmap: - 76.3 MB/s - The guest vsock redirector was "socat VSOCK-CONNECT:2:1234 UNIX-RECV:/path/to/sock" Using sockmap (this patch): - 168.8 MB/s (+121%) - The guest redirector was a simple sockmap echo server, redirecting unix ingress to vsock 2:1234 egress. - Same sender and server programs *Note: these numbers are from RFC v1 Only the virtio transport has been tested. The loopback transport was used in writing bpf/selftests, but not thoroughly tested otherwise. This series requires the skb patch. Changes in v2: - vsock/bpf: rename vsock_dgram_* -> vsock_* - vsock/bpf: change sk_psock_{get,put} and {lock,release}_sock() order to minimize slock hold time - vsock/bpf: use "new style" wait - vsock/bpf: fix bug in wait log - vsock/bpf: add check that recvmsg sk_type is one dgram, seqpacket, or stream. Return error if not one of the three. - virtio/vsock: comment __skb_recv_datagram() usage - virtio/vsock: do not init copied in read_skb() - vsock/bpf: add ifdef guard around struct proto in dgram_recvmsg() - selftests/bpf: add vsock loopback config for aarch64 - selftests/bpf: add vsock loopback config for s390x - selftests/bpf: remove vsock device from vmtest.sh qemu machine - selftests/bpf: remove CONFIG_VIRTIO_VSOCKETS=y from config.x86_64 - vsock/bpf: move transport-related (e.g., if (!vsk->transport)) checks out of fast path Signed-off-by: Bobby Eshleman <bobby.eshleman(a)bytedance.com> --- Bobby Eshleman (3): vsock: support sockmap selftests/bpf: add vsock to vmtest.sh selftests/bpf: Add a test case for vsock sockmap drivers/vhost/vsock.c | 1 + include/linux/virtio_vsock.h | 1 + include/net/af_vsock.h | 17 ++ net/vmw_vsock/Makefile | 1 + net/vmw_vsock/af_vsock.c | 55 ++++++- net/vmw_vsock/virtio_transport.c | 2 + net/vmw_vsock/virtio_transport_common.c | 24 +++ net/vmw_vsock/vsock_bpf.c | 175 +++++++++++++++++++++ net/vmw_vsock/vsock_loopback.c | 2 + tools/testing/selftests/bpf/config.aarch64 | 2 + tools/testing/selftests/bpf/config.s390x | 3 + tools/testing/selftests/bpf/config.x86_64 | 3 + .../selftests/bpf/prog_tests/sockmap_listen.c | 163 +++++++++++++++++++ 13 files changed, 443 insertions(+), 6 deletions(-) --- base-commit: d83115ce337a632f996e44c9f9e18cadfcf5a094 change-id: 20230118-support-vsock-sockmap-connectible-2e1297d2111a Best regards, -- Bobby Eshleman <bobby.eshleman(a)bytedance.com>

2 years, 4 months

4
10
0 0

[PATCH bpf-next] Fix typos in selftest/bpf files

by Taichi Nishimura

This patch is a re-submitting patch. I cloned bpf-next repo, run spell checker, and fixed typos. Included v1 and v2 patches to this one. Could you review it again? Let me know if I have any mistakes. Best regards, Taichi Nishimura Signed-off-by: Taichi Nishimura <awkrail01(a)gmail.com> --- tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c | 2 +- tools/testing/selftests/bpf/prog_tests/trampoline_count.c | 2 +- .../testing/selftests/bpf/progs/btf_dump_test_case_syntax.c | 2 +- tools/testing/selftests/bpf/progs/dynptr_fail.c | 2 +- tools/testing/selftests/bpf/progs/strobemeta.h | 2 +- tools/testing/selftests/bpf/progs/test_cls_redirect.c | 6 +++--- tools/testing/selftests/bpf/progs/test_subprogs.c | 2 +- tools/testing/selftests/bpf/progs/test_xdp_vlan.c | 2 +- tools/testing/selftests/bpf/test_cpp.cpp | 2 +- tools/testing/selftests/bpf/veristat.c | 4 ++-- 10 files changed, 13 insertions(+), 13 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c b/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c index eb2feaac81fe..653b0a20fab9 100644 --- a/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c +++ b/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c @@ -488,7 +488,7 @@ static void run_test(struct migrate_reuseport_test_case *test_case, goto close_servers; } - /* Tie requests to the first four listners */ + /* Tie requests to the first four listeners */ err = start_clients(test_case); if (!ASSERT_OK(err, "start_clients")) goto close_clients; diff --git a/tools/testing/selftests/bpf/prog_tests/trampoline_count.c b/tools/testing/selftests/bpf/prog_tests/trampoline_count.c index 8fd4c0d78089..e91d0d1769f1 100644 --- a/tools/testing/selftests/bpf/prog_tests/trampoline_count.c +++ b/tools/testing/selftests/bpf/prog_tests/trampoline_count.c @@ -79,7 +79,7 @@ void serial_test_trampoline_count(void) if (!ASSERT_EQ(link, NULL, "ptr_is_null")) goto cleanup; - /* and finaly execute the probe */ + /* and finally execute the probe */ prog_fd = bpf_program__fd(prog); if (!ASSERT_GE(prog_fd, 0, "bpf_program__fd")) goto cleanup; diff --git a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c index 26fffb02ed10..ad21ee8c7e23 100644 --- a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c +++ b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c @@ -84,7 +84,7 @@ typedef void (*printf_fn_t)(const char *, ...); * typedef int (*fn_t)(int); * typedef char * const * (*fn_ptr2_t)(s_t, fn_t); * - * - `fn_complext_t`: pointer to a function returning struct and accepting + * - `fn_complex_t`: pointer to a function returning struct and accepting * union and struct. All structs and enum are anonymous and defined inline. * * - `signal_t: pointer to a function accepting a pointer to a function as an diff --git a/tools/testing/selftests/bpf/progs/dynptr_fail.c b/tools/testing/selftests/bpf/progs/dynptr_fail.c index 5950ad6ec2e6..aa5b69354b91 100644 --- a/tools/testing/selftests/bpf/progs/dynptr_fail.c +++ b/tools/testing/selftests/bpf/progs/dynptr_fail.c @@ -630,7 +630,7 @@ static int release_twice_callback_fn(__u32 index, void *data) } /* Test that releasing a dynptr twice, where one of the releases happens - * within a calback function, fails + * within a callback function, fails */ SEC("?raw_tp") __failure __msg("arg 1 is an unacquired reference") diff --git a/tools/testing/selftests/bpf/progs/strobemeta.h b/tools/testing/selftests/bpf/progs/strobemeta.h index 753718595c26..e562be6356f3 100644 --- a/tools/testing/selftests/bpf/progs/strobemeta.h +++ b/tools/testing/selftests/bpf/progs/strobemeta.h @@ -135,7 +135,7 @@ struct strobe_value_loc { * tpidr_el0 for aarch64). * TLS_IMM_EXEC: absolute address of GOT entry containing offset * from thread pointer; - * TLS_GENERAL_DYN: absolute addres of double GOT entry + * TLS_GENERAL_DYN: absolute address of double GOT entry * containing tls_index_t struct; */ int64_t offset; diff --git a/tools/testing/selftests/bpf/progs/test_cls_redirect.c b/tools/testing/selftests/bpf/progs/test_cls_redirect.c index 2833ad722cb7..66b304982245 100644 --- a/tools/testing/selftests/bpf/progs/test_cls_redirect.c +++ b/tools/testing/selftests/bpf/progs/test_cls_redirect.c @@ -600,7 +600,7 @@ static INLINING ret_t get_next_hop(buf_t *pkt, encap_headers_t *encap, return TC_ACT_SHOT; } - /* Skip the remainig next hops (may be zero). */ + /* Skip the remaining next hops (may be zero). */ return skip_next_hops(pkt, encap->unigue.hop_count - encap->unigue.next_hop - 1); } @@ -610,8 +610,8 @@ static INLINING ret_t get_next_hop(buf_t *pkt, encap_headers_t *encap, * * fill_tuple(&t, foo, sizeof(struct iphdr), 123, 321) * - * clang will substitue a costant for sizeof, which allows the verifier - * to track it's value. Based on this, it can figure out the constant + * clang will substitute a constant for sizeof, which allows the verifier + * to track its value. Based on this, it can figure out the constant * return value, and calling code works while still being "generic" to * IPv4 and IPv6. */ diff --git a/tools/testing/selftests/bpf/progs/test_subprogs.c b/tools/testing/selftests/bpf/progs/test_subprogs.c index f8e9256cf18d..a8d602d7c88a 100644 --- a/tools/testing/selftests/bpf/progs/test_subprogs.c +++ b/tools/testing/selftests/bpf/progs/test_subprogs.c @@ -47,7 +47,7 @@ static __noinline int sub5(int v) return sub1(v) - 1; /* compensates sub1()'s + 1 */ } -/* unfortunately verifier rejects `struct task_struct *t` as an unkown pointer +/* unfortunately verifier rejects `struct task_struct *t` as an unknown pointer * type, so we need to accept pointer as integer and then cast it inside the * function */ diff --git a/tools/testing/selftests/bpf/progs/test_xdp_vlan.c b/tools/testing/selftests/bpf/progs/test_xdp_vlan.c index cdf3c48d6cbb..4ddcb6dfe500 100644 --- a/tools/testing/selftests/bpf/progs/test_xdp_vlan.c +++ b/tools/testing/selftests/bpf/progs/test_xdp_vlan.c @@ -98,7 +98,7 @@ bool parse_eth_frame(struct ethhdr *eth, void *data_end, struct parse_pkt *pkt) return true; } -/* Hint, VLANs are choosen to hit network-byte-order issues */ +/* Hint, VLANs are chosen to hit network-byte-order issues */ #define TESTVLAN 4011 /* 0xFAB */ // #define TO_VLAN 4000 /* 0xFA0 (hint 0xOA0 = 160) */ diff --git a/tools/testing/selftests/bpf/test_cpp.cpp b/tools/testing/selftests/bpf/test_cpp.cpp index 0bd9990e83fa..f4936834f76f 100644 --- a/tools/testing/selftests/bpf/test_cpp.cpp +++ b/tools/testing/selftests/bpf/test_cpp.cpp @@ -91,7 +91,7 @@ static void try_skeleton_template() skel.detach(); - /* destructor will destory underlying skeleton */ + /* destructor will destroy underlying skeleton */ } int main(int argc, char *argv[]) diff --git a/tools/testing/selftests/bpf/veristat.c b/tools/testing/selftests/bpf/veristat.c index f961b49b8ef4..83231456d3c5 100644 --- a/tools/testing/selftests/bpf/veristat.c +++ b/tools/testing/selftests/bpf/veristat.c @@ -144,7 +144,7 @@ static struct env { struct verif_stats *prog_stats; int prog_stat_cnt; - /* baseline_stats is allocated and used only in comparsion mode */ + /* baseline_stats is allocated and used only in comparison mode */ struct verif_stats *baseline_stats; int baseline_stat_cnt; @@ -882,7 +882,7 @@ static int process_obj(const char *filename) * that BPF object file is incomplete and has to be statically * linked into a final BPF object file; instead of bailing * out, report it into stderr, mark it as skipped, and - * proceeed + * proceed */ fprintf(stderr, "Failed to open '%s': %d\n", filename, -errno); env.files_skipped++; -- 2.25.1

2 years, 4 months

3
3
0 0

[net-next 0/3] seg6: add PSP flavor support for SRv6 End behavior

by Andrea Mayer

Segment Routing for IPv6 (SRv6 in short) [1] is the instantiation of the Segment Routing (SR) [2] architecture on the IPv6 dataplane. In SRv6, the segment identifiers (SID) are IPv6 addresses and the segment list (SID List) is carried in the Segment Routing Header (SRH). A segment may be bound to a specific packet processing operation called "behavior". The RFC8986 [3] defines and standardizes the most common/relevant behaviors for network operators, e.g., End, End.X and End.T and so on. The RFC8986 also introduces the "flavors" framework aiming to modify or extend the capabilities of SRv6 End, End.X and End.T behaviors. Specifically, these behaviors support the following flavors (either individually or in combinations): - Penultimate Segment Pop (PSP); - Ultimate Segment Pop (USP); - Ultimate Segment Decapsulation (USD). Such flavors enable an End/End.X/End.T behavior to pop the SRH on the penultimate/ultimate SR endpoint node listed in the SID List or to perform a full decapsulation. Currently, the Linux kernel supports a large subset of behaviors described in RFC8986, including the End, End.X and End.T. However, PSP, USP and USD flavors have not yet been implemented. In this patchset, we extend the SRv6 subsystem to implement the PSP flavor in the SRv6 End behavior. To accomplish this task, we leverage the flavor framework previously introduced by another patchset required for supporting the efficient representation of the SID List through the NEXT-C-SID mechanism [4]. In details, the patchset is made of: - patch 1/3: seg6: factor out End lookup nexthop processing to a dedicated function - patch 2/3: seg6: add PSP flavor support for SRv6 End behavior - patch 3/3: selftests: seg6: add selftest for PSP flavor in SRv6 End behavior From the user space perspective, we do not need to change the iproute2 code to support the PSP flavor. However, we provide the man page for the PSP flavor in a separate patch. Comments, improvements and suggestions are always appreciated. Thank you all, Andrea [1] - RFC8754: https://datatracker.ietf.org/doc/html/rfc8754 [2] - RFC8402: https://datatracker.ietf.org/doc/html/rfc8402 [3] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986 [4] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression Andrea Mayer (3): seg6: factor out End lookup nexthop processing to a dedicated function seg6: add PSP flavor support for SRv6 End behavior selftests: seg6: add selftest for PSP flavor in SRv6 End behavior net/ipv6/seg6_local.c | 352 ++++++- tools/testing/selftests/net/Makefile | 1 + .../selftests/net/srv6_end_flavors_test.sh | 869 ++++++++++++++++++ 3 files changed, 1213 insertions(+), 9 deletions(-) create mode 100755 tools/testing/selftests/net/srv6_end_flavors_test.sh -- 2.20.1

2 years, 4 months

3
7
0 0

[PATCH AUTOSEL 6.1 22/24] selftests: ocelot: tc_flower_chains: make test_vlan_ingress_modify() more comprehensive

by Sasha Levin

From: Vladimir Oltean <vladimir.oltean(a)nxp.com> [ Upstream commit bbb253b206b9c417928a6c827d038e457f3012e9 ] We have two IS1 filters of the OCELOT_VCAP_KEY_ANY key type (the one with "action vlan pop" and the one with "action vlan modify") and one of the OCELOT_VCAP_KEY_IPV4 key type (the one with "action skbedit priority"). But we have no IS1 filter with the OCELOT_VCAP_KEY_ETYPE key type, and there was an uncaught breakage there. To increase test coverage, convert one of the OCELOT_VCAP_KEY_ANY filters to OCELOT_VCAP_KEY_ETYPE, by making the filter also match on the MAC SA of the traffic sent by mausezahn, $h1_mac. Signed-off-by: Vladimir Oltean <vladimir.oltean(a)nxp.com> Link: https://lore.kernel.org/r/20230205192409.1796428-2-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh index 9c79bbcce5a87..aff0a59f92d9a 100755 --- a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh +++ b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh @@ -246,7 +246,7 @@ test_vlan_ingress_modify() bridge vlan add dev $swp2 vid 300 tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \ - protocol 802.1Q flower skip_sw vlan_id 200 \ + protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \ action vlan modify id 300 \ action goto chain $(IS2 0 0) -- 2.39.0

2 years, 4 months

1
0
0 0

[PATCH] fixed typos on selftests/bpf

by Taichi Nishimura

I run spell checker and found typos in selftest/bpf/ files. Fixed all of the detected typos. This patch is an extra credit for kselftest task in the Linux kernel bug fixing spring unpaid 2023. Best regards, Taichi Nishimura Signed-off-by: Taichi Nishimura <awkrail01(a)gmail.com> --- tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c | 2 +- tools/testing/selftests/bpf/prog_tests/trampoline_count.c | 2 +- tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c | 2 +- tools/testing/selftests/bpf/progs/dynptr_fail.c | 2 +- tools/testing/selftests/bpf/progs/strobemeta.h | 2 +- tools/testing/selftests/bpf/progs/test_cls_redirect.c | 4 ++-- tools/testing/selftests/bpf/progs/test_subprogs.c | 2 +- tools/testing/selftests/bpf/progs/test_xdp_vlan.c | 2 +- tools/testing/selftests/bpf/test_cpp.cpp | 2 +- tools/testing/selftests/bpf/veristat.c | 4 ++-- 10 files changed, 12 insertions(+), 12 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c b/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c index eb2feaac81fe..653b0a20fab9 100644 --- a/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c +++ b/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c @@ -488,7 +488,7 @@ static void run_test(struct migrate_reuseport_test_case *test_case, goto close_servers; } - /* Tie requests to the first four listners */ + /* Tie requests to the first four listeners */ err = start_clients(test_case); if (!ASSERT_OK(err, "start_clients")) goto close_clients; diff --git a/tools/testing/selftests/bpf/prog_tests/trampoline_count.c b/tools/testing/selftests/bpf/prog_tests/trampoline_count.c index 564b75bc087f..353451a0c88c 100644 --- a/tools/testing/selftests/bpf/prog_tests/trampoline_count.c +++ b/tools/testing/selftests/bpf/prog_tests/trampoline_count.c @@ -74,7 +74,7 @@ void serial_test_trampoline_count(void) if (!ASSERT_EQ(link, NULL, "ptr_is_null")) goto cleanup; - /* and finaly execute the probe */ + /* and finally execute the probe */ prog_fd = bpf_program__fd(prog); if (!ASSERT_GE(prog_fd, 0, "bpf_program__fd")) goto cleanup; diff --git a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c index 4ee4748133fe..daa8753bb171 100644 --- a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c +++ b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c @@ -51,7 +51,7 @@ typedef void (*printf_fn_t)(const char *, ...); * typedef int (*fn_t)(int); * typedef char * const * (*fn_ptr2_t)(s_t, fn_t); * - * - `fn_complext_t`: pointer to a function returning struct and accepting + * - `fn_complex_t`: pointer to a function returning struct and accepting * union and struct. All structs and enum are anonymous and defined inline. * * - `signal_t: pointer to a function accepting a pointer to a function as an diff --git a/tools/testing/selftests/bpf/progs/dynptr_fail.c b/tools/testing/selftests/bpf/progs/dynptr_fail.c index 78debc1b3820..b979ee9f5a37 100644 --- a/tools/testing/selftests/bpf/progs/dynptr_fail.c +++ b/tools/testing/selftests/bpf/progs/dynptr_fail.c @@ -623,7 +623,7 @@ static int release_twice_callback_fn(__u32 index, void *data) } /* Test that releasing a dynptr twice, where one of the releases happens - * within a calback function, fails + * within a callback function, fails */ SEC("?raw_tp") __failure __msg("arg 1 is an unacquired reference") diff --git a/tools/testing/selftests/bpf/progs/strobemeta.h b/tools/testing/selftests/bpf/progs/strobemeta.h index 753718595c26..e562be6356f3 100644 --- a/tools/testing/selftests/bpf/progs/strobemeta.h +++ b/tools/testing/selftests/bpf/progs/strobemeta.h @@ -135,7 +135,7 @@ struct strobe_value_loc { * tpidr_el0 for aarch64). * TLS_IMM_EXEC: absolute address of GOT entry containing offset * from thread pointer; - * TLS_GENERAL_DYN: absolute addres of double GOT entry + * TLS_GENERAL_DYN: absolute address of double GOT entry * containing tls_index_t struct; */ int64_t offset; diff --git a/tools/testing/selftests/bpf/progs/test_cls_redirect.c b/tools/testing/selftests/bpf/progs/test_cls_redirect.c index 2833ad722cb7..a8ba39848bbf 100644 --- a/tools/testing/selftests/bpf/progs/test_cls_redirect.c +++ b/tools/testing/selftests/bpf/progs/test_cls_redirect.c @@ -600,7 +600,7 @@ static INLINING ret_t get_next_hop(buf_t *pkt, encap_headers_t *encap, return TC_ACT_SHOT; } - /* Skip the remainig next hops (may be zero). */ + /* Skip the remaining next hops (may be zero). */ return skip_next_hops(pkt, encap->unigue.hop_count - encap->unigue.next_hop - 1); } @@ -610,7 +610,7 @@ static INLINING ret_t get_next_hop(buf_t *pkt, encap_headers_t *encap, * * fill_tuple(&t, foo, sizeof(struct iphdr), 123, 321) * - * clang will substitue a costant for sizeof, which allows the verifier + * clang will substitute a costant for sizeof, which allows the verifier * to track it's value. Based on this, it can figure out the constant * return value, and calling code works while still being "generic" to * IPv4 and IPv6. diff --git a/tools/testing/selftests/bpf/progs/test_subprogs.c b/tools/testing/selftests/bpf/progs/test_subprogs.c index f8e9256cf18d..a8d602d7c88a 100644 --- a/tools/testing/selftests/bpf/progs/test_subprogs.c +++ b/tools/testing/selftests/bpf/progs/test_subprogs.c @@ -47,7 +47,7 @@ static __noinline int sub5(int v) return sub1(v) - 1; /* compensates sub1()'s + 1 */ } -/* unfortunately verifier rejects `struct task_struct *t` as an unkown pointer +/* unfortunately verifier rejects `struct task_struct *t` as an unknown pointer * type, so we need to accept pointer as integer and then cast it inside the * function */ diff --git a/tools/testing/selftests/bpf/progs/test_xdp_vlan.c b/tools/testing/selftests/bpf/progs/test_xdp_vlan.c index 134768f6b788..c19324f228a3 100644 --- a/tools/testing/selftests/bpf/progs/test_xdp_vlan.c +++ b/tools/testing/selftests/bpf/progs/test_xdp_vlan.c @@ -98,7 +98,7 @@ bool parse_eth_frame(struct ethhdr *eth, void *data_end, struct parse_pkt *pkt) return true; } -/* Hint, VLANs are choosen to hit network-byte-order issues */ +/* Hint, VLANs are chosen to hit network-byte-order issues */ #define TESTVLAN 4011 /* 0xFAB */ // #define TO_VLAN 4000 /* 0xFA0 (hint 0xOA0 = 160) */ diff --git a/tools/testing/selftests/bpf/test_cpp.cpp b/tools/testing/selftests/bpf/test_cpp.cpp index 0bd9990e83fa..f4936834f76f 100644 --- a/tools/testing/selftests/bpf/test_cpp.cpp +++ b/tools/testing/selftests/bpf/test_cpp.cpp @@ -91,7 +91,7 @@ static void try_skeleton_template() skel.detach(); - /* destructor will destory underlying skeleton */ + /* destructor will destroy underlying skeleton */ } int main(int argc, char *argv[]) diff --git a/tools/testing/selftests/bpf/veristat.c b/tools/testing/selftests/bpf/veristat.c index f961b49b8ef4..83231456d3c5 100644 --- a/tools/testing/selftests/bpf/veristat.c +++ b/tools/testing/selftests/bpf/veristat.c @@ -144,7 +144,7 @@ static struct env { struct verif_stats *prog_stats; int prog_stat_cnt; - /* baseline_stats is allocated and used only in comparsion mode */ + /* baseline_stats is allocated and used only in comparison mode */ struct verif_stats *baseline_stats; int baseline_stat_cnt; @@ -882,7 +882,7 @@ static int process_obj(const char *filename) * that BPF object file is incomplete and has to be statically * linked into a final BPF object file; instead of bailing * out, report it into stderr, mark it as skipped, and - * proceeed + * proceed */ fprintf(stderr, "Failed to open '%s': %d\n", filename, -errno); env.files_skipped++; -- 2.25.1

2 years, 4 months

3
4
0 0

[RFC PATCH v1 0/2] selftests/x86: sysret_rip update for FRED system

by Ammar Faizi

From: Ammar Faizi <ammarfaizi2(a)gnuweeb.org> On Mon, 23 Jan 2023 15:58:12 -0800, "H. Peter Anvin" wrote: > On 1/23/23 15:43, Ammar Faizi wrote: > > > > Align them to spot differences: > > > > 0x200893 = 0b1000000000100010010011 > > 0x200a93 = 0b1000000000101010010011 > > ^ > > > > Or just xor them to find the differences: > > > > (gdb) p/x 0x200893 ^ 0x200a93 > > $3 = 0x200 > > > > ** Checks my Intel SDM cheat sheets. ** > > > > Then, I was like "Oh, that's (1 << 9) a.k.a. IF. Of course we can't > > change rflags[IF] from userspace!!!". > > > > In short, we can't use 0x200893 as the rflags_sentinel value because it > > clears the interrupt flag. > > > > Right, my mistake. I changed it to 0x200a93. The test passed on my machine. But I don't have a FRED system to test the special case. Didn't manage to apply the feedback from Andrew about the way to handle redzone properly, though. Something like this... ---------- This is just an RFC patchset. Xin Li reported sysret_rip test fails at: assert(ctx->uc_mcontext.gregs[REG_EFL] == ctx->uc_mcontext.gregs[REG_R11]); in a FRED system. Handle the FRED system scenario too. There are two patches in this series. Comments welcome... Note: Only tested for 'syscall' sets %rcx=%rip and %r11=%rflags case. I don't have a FRED system to test it. How to test this: $ make -C tools/testing/selftests/x86 $ tools/testing/selftests/x86/sysret_rip_64 Link: https://lore.kernel.org/lkml/5d4ad3e3-034f-c7da-d141-9c001c2343af@intel.com Signed-off-by: Ammar Faizi <ammarfaizi2(a)gnuweeb.org> --- Ammar Faizi (2): selftests/x86: sysret_rip: Handle syscall in a FRED system selftests/x86: sysret_rip: Add more syscall tests with respect to `%rcx` and `%r11` tools/testing/selftests/x86/sysret_rip.c | 105 ++++++++++++++++++++++- 1 file changed, 104 insertions(+), 1 deletion(-) base-commit: e12ad468c22065a2826b2fc4c11d2113a7975301 -- Ammar Faizi

2 years, 4 months

4
10
0 0

[PATCH] mm: userfaultfd: add UFFDIO_CONTINUE_MODE_WP to install WP PTEs

by Axel Rasmussen

UFFDIO_COPY already has UFFDIO_COPY_MODE_WP, so when installing a new PTE to resolve a missing fault, one can install a write-protected one. This is useful when using UFFDIO_REGISTER_MODE_{MISSING,WP} in combination. So, add an analogous UFFDIO_CONTINUE_MODE_WP, which does the same thing but for *minor* faults. Rename "wp_copy" arguments to "wp_mode", since the mode now applies more widely than just to the copy operation. Update the selftest to do some very basic exercising of the new flag. Signed-off-by: Axel Rasmussen <axelrasmussen(a)google.com> --- fs/userfaultfd.c | 6 ++- include/linux/userfaultfd_k.h | 3 +- include/uapi/linux/userfaultfd.h | 7 ++++ mm/hugetlb.c | 6 +-- mm/shmem.c | 4 +- mm/userfaultfd.c | 49 ++++++++++++++---------- tools/testing/selftests/vm/userfaultfd.c | 4 ++ 7 files changed, 51 insertions(+), 28 deletions(-) diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c index cc694846617a..545dc033eec8 100644 --- a/fs/userfaultfd.c +++ b/fs/userfaultfd.c @@ -1910,13 +1910,15 @@ static int userfaultfd_continue(struct userfaultfd_ctx *ctx, unsigned long arg) uffdio_continue.range.start) { goto out; } - if (uffdio_continue.mode & ~UFFDIO_CONTINUE_MODE_DONTWAKE) + if (uffdio_continue.mode & ~(UFFDIO_CONTINUE_MODE_DONTWAKE | + UFFDIO_CONTINUE_MODE_WP)) goto out; if (mmget_not_zero(ctx->mm)) { ret = mcopy_continue(ctx->mm, uffdio_continue.range.start, uffdio_continue.range.len, - &ctx->mmap_changing); + &ctx->mmap_changing, + uffdio_continue.mode); mmput(ctx->mm); } else { return -ESRCH; diff --git a/include/linux/userfaultfd_k.h b/include/linux/userfaultfd_k.h index 9df0b9a762cc..a53aa56e78ad 100644 --- a/include/linux/userfaultfd_k.h +++ b/include/linux/userfaultfd_k.h @@ -69,7 +69,8 @@ extern ssize_t mfill_zeropage(struct mm_struct *dst_mm, unsigned long len, atomic_t *mmap_changing); extern ssize_t mcopy_continue(struct mm_struct *dst_mm, unsigned long dst_start, - unsigned long len, atomic_t *mmap_changing); + unsigned long len, atomic_t *mmap_changing, + __u64 mode); extern int mwriteprotect_range(struct mm_struct *dst_mm, unsigned long start, unsigned long len, bool enable_wp, atomic_t *mmap_changing); diff --git a/include/uapi/linux/userfaultfd.h b/include/uapi/linux/userfaultfd.h index 005e5e306266..14059a0861bf 100644 --- a/include/uapi/linux/userfaultfd.h +++ b/include/uapi/linux/userfaultfd.h @@ -297,6 +297,13 @@ struct uffdio_writeprotect { struct uffdio_continue { struct uffdio_range range; #define UFFDIO_CONTINUE_MODE_DONTWAKE ((__u64)1<<0) + /* + * UFFDIO_CONTINUE_MODE_WP will map the page write protected on + * the fly. UFFDIO_CONTINUE_MODE_WP is available only if the + * write protected ioctl is implemented for the range + * according to the uffdio_register.ioctls. + */ +#define UFFDIO_CONTINUE_MODE_WP ((__u64)1<<1) __u64 mode; /* diff --git a/mm/hugetlb.c b/mm/hugetlb.c index bdbfeb6fb393..a1bd0b0c6c43 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -6169,7 +6169,7 @@ int hugetlb_mcopy_atomic_pte(struct mm_struct *dst_mm, unsigned long src_addr, enum mcopy_atomic_mode mode, struct page **pagep, - bool wp_copy) + bool wp_mode) { bool is_continue = (mode == MCOPY_ATOMIC_CONTINUE); struct hstate *h = hstate_vma(dst_vma); @@ -6306,7 +6306,7 @@ int hugetlb_mcopy_atomic_pte(struct mm_struct *dst_mm, * For either: (1) CONTINUE on a non-shared VMA, or (2) UFFDIO_COPY * with wp flag set, don't set pte write bit. */ - if (wp_copy || (is_continue && !vm_shared)) + if (wp_mode || (is_continue && !vm_shared)) writable = 0; else writable = dst_vma->vm_flags & VM_WRITE; @@ -6321,7 +6321,7 @@ int hugetlb_mcopy_atomic_pte(struct mm_struct *dst_mm, _dst_pte = huge_pte_mkdirty(_dst_pte); _dst_pte = pte_mkyoung(_dst_pte); - if (wp_copy) + if (wp_mode) _dst_pte = huge_pte_mkuffd_wp(_dst_pte); set_huge_pte_at(dst_mm, dst_addr, dst_pte, _dst_pte); diff --git a/mm/shmem.c b/mm/shmem.c index 0005ab2c29af..725e5d5d85ab 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2402,7 +2402,7 @@ int shmem_mfill_atomic_pte(struct mm_struct *dst_mm, struct vm_area_struct *dst_vma, unsigned long dst_addr, unsigned long src_addr, - bool zeropage, bool wp_copy, + bool zeropage, bool wp_mode, struct page **pagep) { struct inode *inode = file_inode(dst_vma->vm_file); @@ -2493,7 +2493,7 @@ int shmem_mfill_atomic_pte(struct mm_struct *dst_mm, goto out_release; ret = mfill_atomic_install_pte(dst_mm, dst_pmd, dst_vma, dst_addr, - &folio->page, true, wp_copy); + &folio->page, true, wp_mode); if (ret) goto out_delete_from_cache; diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c index 0499907b6f1a..2ad4dcf72968 100644 --- a/mm/userfaultfd.c +++ b/mm/userfaultfd.c @@ -58,7 +58,7 @@ struct vm_area_struct *find_dst_vma(struct mm_struct *dst_mm, int mfill_atomic_install_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd, struct vm_area_struct *dst_vma, unsigned long dst_addr, struct page *page, - bool newly_allocated, bool wp_copy) + bool newly_allocated, bool wp_mode) { int ret; pte_t _dst_pte, *dst_pte; @@ -79,7 +79,7 @@ int mfill_atomic_install_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd, * Always mark a PTE as write-protected when needed, regardless of * VM_WRITE, which the user might change. */ - if (wp_copy) { + if (wp_mode) { _dst_pte = pte_mkuffd_wp(_dst_pte); writable = false; } @@ -147,7 +147,7 @@ static int mcopy_atomic_pte(struct mm_struct *dst_mm, unsigned long dst_addr, unsigned long src_addr, struct page **pagep, - bool wp_copy) + bool wp_mode) { void *page_kaddr; int ret; @@ -208,7 +208,7 @@ static int mcopy_atomic_pte(struct mm_struct *dst_mm, goto out_release; ret = mfill_atomic_install_pte(dst_mm, dst_pmd, dst_vma, dst_addr, - page, true, wp_copy); + page, true, wp_mode); if (ret) goto out_release; out: @@ -258,7 +258,7 @@ static int mcontinue_atomic_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd, struct vm_area_struct *dst_vma, unsigned long dst_addr, - bool wp_copy) + bool wp_mode) { struct inode *inode = file_inode(dst_vma->vm_file); pgoff_t pgoff = linear_page_index(dst_vma, dst_addr); @@ -284,7 +284,7 @@ static int mcontinue_atomic_pte(struct mm_struct *dst_mm, } ret = mfill_atomic_install_pte(dst_mm, dst_pmd, dst_vma, dst_addr, - page, false, wp_copy); + page, false, wp_mode); if (ret) goto out_release; @@ -330,7 +330,7 @@ static __always_inline ssize_t __mcopy_atomic_hugetlb(struct mm_struct *dst_mm, unsigned long src_start, unsigned long len, enum mcopy_atomic_mode mode, - bool wp_copy) + bool wp_mode) { int vm_shared = dst_vma->vm_flags & VM_SHARED; ssize_t err; @@ -427,7 +427,7 @@ static __always_inline ssize_t __mcopy_atomic_hugetlb(struct mm_struct *dst_mm, err = hugetlb_mcopy_atomic_pte(dst_mm, dst_pte, dst_vma, dst_addr, src_addr, mode, &page, - wp_copy); + wp_mode); hugetlb_vma_unlock_read(dst_vma); mutex_unlock(&hugetlb_fault_mutex_table[hash]); @@ -483,7 +483,7 @@ extern ssize_t __mcopy_atomic_hugetlb(struct mm_struct *dst_mm, unsigned long src_start, unsigned long len, enum mcopy_atomic_mode mode, - bool wp_copy); + bool wp_mode); #endif /* CONFIG_HUGETLB_PAGE */ static __always_inline ssize_t mfill_atomic_pte(struct mm_struct *dst_mm, @@ -493,13 +493,13 @@ static __always_inline ssize_t mfill_atomic_pte(struct mm_struct *dst_mm, unsigned long src_addr, struct page **page, enum mcopy_atomic_mode mode, - bool wp_copy) + bool wp_mode) { ssize_t err; if (mode == MCOPY_ATOMIC_CONTINUE) { return mcontinue_atomic_pte(dst_mm, dst_pmd, dst_vma, dst_addr, - wp_copy); + wp_mode); } /* @@ -516,7 +516,7 @@ static __always_inline ssize_t mfill_atomic_pte(struct mm_struct *dst_mm, if (mode == MCOPY_ATOMIC_NORMAL) err = mcopy_atomic_pte(dst_mm, dst_pmd, dst_vma, dst_addr, src_addr, page, - wp_copy); + wp_mode); else err = mfill_zeropage_pte(dst_mm, dst_pmd, dst_vma, dst_addr); @@ -524,12 +524,21 @@ static __always_inline ssize_t mfill_atomic_pte(struct mm_struct *dst_mm, err = shmem_mfill_atomic_pte(dst_mm, dst_pmd, dst_vma, dst_addr, src_addr, mode != MCOPY_ATOMIC_NORMAL, - wp_copy, page); + wp_mode, page); } return err; } +static inline bool wp_mode_enabled(enum mcopy_atomic_mode mcopy_mode, __u64 mode) +{ + switch (mode) { + case MCOPY_ATOMIC_NORMAL: return mode & UFFDIO_COPY_MODE_WP; + case MCOPY_ATOMIC_CONTINUE: return mode & UFFDIO_CONTINUE_MODE_WP; + default: return false; + } +} + static __always_inline ssize_t __mcopy_atomic(struct mm_struct *dst_mm, unsigned long dst_start, unsigned long src_start, @@ -544,7 +553,7 @@ static __always_inline ssize_t __mcopy_atomic(struct mm_struct *dst_mm, unsigned long src_addr, dst_addr; long copied; struct page *page; - bool wp_copy; + bool wp_mode; /* * Sanitize the command parameters: @@ -594,8 +603,8 @@ static __always_inline ssize_t __mcopy_atomic(struct mm_struct *dst_mm, * validate 'mode' now that we know the dst_vma: don't allow * a wrprotect copy if the userfaultfd didn't register as WP. */ - wp_copy = mode & UFFDIO_COPY_MODE_WP; - if (wp_copy && !(dst_vma->vm_flags & VM_UFFD_WP)) + wp_mode = wp_mode_enabled(mcopy_mode, mode); + if (wp_mode && !(dst_vma->vm_flags & VM_UFFD_WP)) goto out_unlock; /* @@ -604,7 +613,7 @@ static __always_inline ssize_t __mcopy_atomic(struct mm_struct *dst_mm, if (is_vm_hugetlb_page(dst_vma)) return __mcopy_atomic_hugetlb(dst_mm, dst_vma, dst_start, src_start, len, mcopy_mode, - wp_copy); + wp_mode); if (!vma_is_anonymous(dst_vma) && !vma_is_shmem(dst_vma)) goto out_unlock; @@ -656,7 +665,7 @@ static __always_inline ssize_t __mcopy_atomic(struct mm_struct *dst_mm, BUG_ON(pmd_trans_huge(*dst_pmd)); err = mfill_atomic_pte(dst_mm, dst_pmd, dst_vma, dst_addr, - src_addr, &page, mcopy_mode, wp_copy); + src_addr, &page, mcopy_mode, wp_mode); cond_resched(); if (unlikely(err == -ENOENT)) { @@ -718,10 +727,10 @@ ssize_t mfill_zeropage(struct mm_struct *dst_mm, unsigned long start, } ssize_t mcopy_continue(struct mm_struct *dst_mm, unsigned long start, - unsigned long len, atomic_t *mmap_changing) + unsigned long len, atomic_t *mmap_changing, __u64 mode) { return __mcopy_atomic(dst_mm, start, 0, len, MCOPY_ATOMIC_CONTINUE, - mmap_changing, 0); + mmap_changing, mode); } void uffd_wp_range(struct mm_struct *dst_mm, struct vm_area_struct *dst_vma, diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index 7f22844ed704..41c1f9abc481 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -585,6 +585,8 @@ static void continue_range(int ufd, __u64 start, __u64 len) req.range.start = start; req.range.len = len; req.mode = 0; + if (test_uffdio_wp) + req.mode |= UFFDIO_CONTINUE_MODE_WP; if (ioctl(ufd, UFFDIO_CONTINUE, &req)) err("UFFDIO_CONTINUE failed for address 0x%" PRIx64, @@ -1332,6 +1334,8 @@ static int userfaultfd_minor_test(void) uffdio_register.range.start = (unsigned long)area_dst_alias; uffdio_register.range.len = nr_pages * page_size; uffdio_register.mode = UFFDIO_REGISTER_MODE_MINOR; + if (test_uffdio_wp) + uffdio_register.mode |= UFFDIO_REGISTER_MODE_WP; if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register)) err("register failure"); -- 2.39.1.581.gbfd45094c4-goog

2 years, 4 months

4
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror