- Linux-kselftest-mirror - lists.linaro.org

[PATCH v15 00/12] bpf: Add kfuncs for PKCS#7 signature verification

by Roberto Sassu

From: Roberto Sassu <roberto.sassu(a)huawei.com> One of the desirable features in security is the ability to restrict import of data to a given system based on data authenticity. If data import can be restricted, it would be possible to enforce a system-wide policy based on the signing keys the system owner trusts. This feature is widely used in the kernel. For example, if the restriction is enabled, kernel modules can be plugged in only if they are signed with a key whose public part is in the primary or secondary keyring. For eBPF, it can be useful as well. For example, it might be useful to authenticate data an eBPF program makes security decisions on. After a discussion in the eBPF mailing list, it was decided that the stated goal should be accomplished by introducing four new kfuncs: bpf_lookup_user_key() and bpf_lookup_system_key(), for retrieving a keyring with keys trusted for signature verification, respectively from its serial and from a pre-determined ID; bpf_key_put(), to release the reference obtained with the former two kfuncs, bpf_verify_pkcs7_signature(), for verifying PKCS#7 signatures. Other than the key serial, bpf_lookup_user_key() also accepts key lookup flags, that influence the behavior of the lookup. bpf_lookup_system_key() accepts pre-determined IDs defined in include/linux/verification.h. bpf_key_put() accepts the new bpf_key structure, introduced to tell whether the other structure member, a key pointer, is valid or not. The reason is that verify_pkcs7_signature() also accepts invalid pointers, set with the pre-determined ID, to select a system-defined keyring. key_put() must be called only for valid key pointers. Since the two key lookup functions allocate memory and one increments a key reference count, they must be used in conjunction with bpf_key_put(). The latter must be called only if the lookup functions returned a non-NULL pointer. The verifier denies the execution of eBPF programs that don't respect this rule. The two key lookup functions should be used in alternative, depending on the use case. While bpf_lookup_user_key() provides great flexibility, it seems suboptimal in terms of security guarantees, as even if the eBPF program is assumed to be trusted, the serial used to obtain the key pointer might come from untrusted user space not choosing one that the system administrator approves to enforce a mandatory policy. bpf_lookup_system_key() instead provides much stronger guarantees, especially if the pre-determined ID is not passed by user space but is hardcoded in the eBPF program, and that program is signed. In this case, bpf_verify_pkcs7_signature() will always perform signature verification with a key that the system administrator approves, i.e. the primary, secondary or platform keyring. Nevertheless, key permission checks need to be done accurately. Since bpf_lookup_user_key() cannot determine how a key will be used by other kfuncs, it has to defer the permission check to the actual kfunc using the key. It does it by calling lookup_user_key() with KEY_DEFER_PERM_CHECK as needed permission. Later, bpf_verify_pkcs7_signature(), if called, completes the permission check by calling key_validate(). It does not need to call key_task_permission() with permission KEY_NEED_SEARCH, as it is already done elsewhere by the key subsystem. Future kfuncs using the bpf_key structure need to implement the proper checks as well. Finally, the last kfunc, bpf_verify_pkcs7_signature(), accepts the data and signature to verify as eBPF dynamic pointers, to minimize the number of kfunc parameters, and the keyring with keys for signature verification as a bpf_key structure, returned by one of the two key lookup functions. bpf_lookup_user_key() and bpf_verify_pkcs7_signature() can be called only from sleepable programs, because of memory allocation and crypto operations. For example, the lsm.s/bpf attach point is suitable, fexit/array_map_update_elem is not. The correctness of implementation of the new kfuncs and of their usage is checked with the introduced tests. The patch set includes a patch from another author (dependency) for sake of completeness. It is organized as follows. Patch 1 from KP Singh allows kfuncs to be used by LSM programs. Patch 2 splits is_dynptr_reg_valid_init() and introduces is_dynptr_type_expected(), to know more precisely the cause of a negative result of a dynamic pointer check. Patch 3 allows dynamic pointers to be used as kfunc parameters. Patch 4 exports bpf_dynptr_get_size(), to obtain the real size of data carried by a dynamic pointer. Patch 5 makes available for new eBPF kfuncs and programs some key-related definitions. Patch 6 introduces the bpf_lookup_*_key() and bpf_key_put() kfuncs. Patch 7 introduces the bpf_verify_pkcs7_signature() kfunc. Patch 8 changes the testing kernel configuration to compile everything as built-in. Finally, patches 9-12 introduce the tests. Changelog v14: - Explain that is_dynptr_type_expected() will be useful also for BTF (suggested by Joanne) - Rename KEY_LOOKUP_FLAGS_ALL to KEY_LOOKUP_ALL (suggested by Jarkko) - Swap declaration of spi and dynptr_type in is_dynptr_type_expected() (suggested by Joanne) - Reimplement kfunc dynptr tests with a regular eBPF program instead of executing them with test_verifier (suggested by Joanne) - Make key lookup flags as enum so that they are automatically exported through BTF (suggested by Alexei) v13: - Split is_dynptr_reg_valid_init() and introduce is_dynptr_type_expected() to see if the dynamic pointer type passed as argument to a kfunc is supported (suggested by Kumar) - Add forward declaration of struct key in include/linux/bpf.h (suggested by Song) - Declare mask for key lookup flags, remove key_lookup_flags_check() (suggested by Jarkko and KP) - Allow only certain dynamic pointer types (currently, local) to be passed as argument to kfuncs (suggested by Kumar) - For each dynamic pointer parameter in kfunc, additionally check if the passed pointer is to the stack (suggested by Kumar) - Split the validity/initialization and dynamic pointer type check also in the verifier, and adjust the expected error message in the test (a test for an unexpected dynptr type passed to a helper cannot be added due to missing suitable helpers, but this case has been tested manually) - Add verifier tests to check the dynamic pointers passed as argument to kfuncs (suggested by Kumar) v12: - Put lookup_key and verify_pkcs7_sig tests in deny list for s390x (JIT does not support calling kernel function) v11: - Move stringify_struct() macro to include/linux/btf.h (suggested by Daniel) - Change kernel configuration options in tools/testing/selftests/bpf/config* from =m to =y v10: - Introduce key_lookup_flags_check() and system_keyring_id_check() inline functions to check parameters (suggested by KP) - Fix descriptions and comment of key-related kfuncs (suggested by KP) - Register kfunc set only once (suggested by Alexei) - Move needed kernel options to the architecture-independent configuration for testing v9: - Drop patch to introduce KF_SLEEPABLE kfunc flag (already merged) - Rename valid_ptr member of bpf_key to has_ref (suggested by Daniel) - Check dynamic pointers in kfunc definition with bpf_dynptr_kern struct definition instead of string, to detect structure renames (suggested by Daniel) - Explicitly say that we permit initialized dynamic pointers in kfunc definition (suggested by Daniel) - Remove noinline __weak from kfuncs definition (reported by Daniel) - Simplify key lookup flags check in bpf_lookup_user_key() (suggested by Daniel) - Explain the reason for deferring key permission check (suggested by Daniel) - Allocate memory with GFP_ATOMIC in bpf_lookup_system_key(), and remove KF_SLEEPABLE kfunc flag from kfunc declaration (suggested by Daniel) - Define only one kfunc set and remove the loop for registration (suggested by Alexei) v8: - Define the new bpf_key structure to carry the key pointer and whether that pointer is valid or not (suggested by Daniel) - Drop patch to mark a kfunc parameter with the __maybe_null suffix - Improve documentation of kfuncs - Introduce bpf_lookup_system_key() to obtain a key pointer suitable for verify_pkcs7_signature() (suggested by Daniel) - Use the new kfunc registration API - Drop patch to test the __maybe_null suffix - Add tests for bpf_lookup_system_key() v7: - Add support for using dynamic and NULL pointers in kfunc (suggested by Alexei) - Add new kfunc-related tests v6: - Switch back to key lookup helpers + signature verification (until v5), and defer permission check from bpf_lookup_user_key() to bpf_verify_pkcs7_signature() - Add additional key lookup test to illustrate the usage of the KEY_LOOKUP_CREATE flag and validate the flags (suggested by Daniel) - Make description of flags of bpf_lookup_user_key() more user-friendly (suggested by Daniel) - Fix validation of flags parameter in bpf_lookup_user_key() (reported by Daniel) - Rename bpf_verify_pkcs7_signature() keyring-related parameters to user_keyring and system_keyring to make their purpose more clear - Accept keyring-related parameters of bpf_verify_pkcs7_signature() as alternatives (suggested by KP) - Replace unsigned long type with u64 in helper declaration (suggested by Daniel) - Extend the bpf_verify_pkcs7_signature() test by calling the helper without data, by ensuring that the helper enforces the keyring-related parameters as alternatives, by ensuring that the helper rejects inaccessible and expired keyrings, and by checking all system keyrings - Move bpf_lookup_user_key() and bpf_key_put() usage tests to ref_tracking.c (suggested by John) - Call bpf_lookup_user_key() and bpf_key_put() only in sleepable programs v5: - Move KEY_LOOKUP_ to include/linux/key.h for validation of bpf_verify_pkcs7_signature() parameter - Remove bpf_lookup_user_key() and bpf_key_put() helpers, and the corresponding tests - Replace struct key parameter of bpf_verify_pkcs7_signature() with the keyring serial and lookup flags - Call lookup_user_key() and key_put() in bpf_verify_pkcs7_signature() code, to ensure that the retrieved key is used according to the permission requested at lookup time - Clarified keyring precedence in the description of bpf_verify_pkcs7_signature() (suggested by John) - Remove newline in the second argument of ASSERT_ - Fix helper prototype regular expression in bpf_doc.py v4: - Remove bpf_request_key_by_id(), don't return an invalid pointer that other helpers can use - Pass the keyring ID (without ULONG_MAX, suggested by Alexei) to bpf_verify_pkcs7_signature() - Introduce bpf_lookup_user_key() and bpf_key_put() helpers (suggested by Alexei) - Add lookup_key_norelease test, to ensure that the verifier blocks eBPF programs which don't decrement the key reference count - Parse raw PKCS#7 signature instead of module-style signature in the verify_pkcs7_signature test (suggested by Alexei) - Parse kernel module in user space and pass raw PKCS#7 signature to the eBPF program for signature verification v3: - Rename bpf_verify_signature() back to bpf_verify_pkcs7_signature() to avoid managing different parameters for each signature verification function in one helper (suggested by Daniel) - Use dynamic pointers and export bpf_dynptr_get_size() (suggested by Alexei) - Introduce bpf_request_key_by_id() to give more flexibility to the caller of bpf_verify_pkcs7_signature() to retrieve the appropriate keyring (suggested by Alexei) - Fix test by reordering the gcc command line, always compile sign-file - Improve helper support check mechanism in the test v2: - Rename bpf_verify_pkcs7_signature() to a more generic bpf_verify_signature() and pass the signature type (suggested by KP) - Move the helper and prototype declaration under #ifdef so that user space can probe for support for the helper (suggested by Daniel) - Describe better the keyring types (suggested by Daniel) - Include linux/bpf.h instead of vmlinux.h to avoid implicit or redeclaration - Make the test selfcontained (suggested by Alexei) v1: - Don't define new map flag but introduce simple wrapper of verify_pkcs7_signature() (suggested by Alexei and KP) KP Singh (1): bpf: Allow kfuncs to be used in LSM programs Roberto Sassu (11): bpf: Move dynptr type check to is_dynptr_type_expected() btf: Allow dynamic pointer parameters in kfuncs bpf: Export bpf_dynptr_get_size() KEYS: Move KEY_LOOKUP_ to include/linux/key.h and define KEY_LOOKUP_ALL bpf: Add bpf_lookup_*_key() and bpf_key_put() kfuncs bpf: Add bpf_verify_pkcs7_signature() kfunc selftests/bpf: Compile kernel with everything as built-in selftests/bpf: Add verifier tests for bpf_lookup_*_key() and bpf_key_put() selftests/bpf: Add additional tests for bpf_lookup_*_key() selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfunc selftests/bpf: Add tests for dynamic pointers parameters in kfuncs include/linux/bpf.h | 9 + include/linux/bpf_verifier.h | 5 + include/linux/btf.h | 9 + include/linux/key.h | 6 + include/linux/verification.h | 8 + kernel/bpf/btf.c | 34 ++ kernel/bpf/helpers.c | 2 +- kernel/bpf/verifier.c | 35 +- kernel/trace/bpf_trace.c | 180 ++++++++ security/keys/internal.h | 2 - tools/testing/selftests/bpf/DENYLIST.s390x | 2 + tools/testing/selftests/bpf/Makefile | 14 +- tools/testing/selftests/bpf/config | 32 +- tools/testing/selftests/bpf/config.x86_64 | 7 +- .../testing/selftests/bpf/prog_tests/dynptr.c | 2 +- .../bpf/prog_tests/kfunc_dynptr_param.c | 102 +++++ .../selftests/bpf/prog_tests/lookup_key.c | 112 +++++ .../bpf/prog_tests/verify_pkcs7_sig.c | 399 ++++++++++++++++++ .../bpf/progs/test_kfunc_dynptr_param.c | 57 +++ .../selftests/bpf/progs/test_lookup_key.c | 46 ++ .../bpf/progs/test_verify_pkcs7_sig.c | 100 +++++ tools/testing/selftests/bpf/test_verifier.c | 3 +- .../selftests/bpf/verifier/ref_tracking.c | 139 ++++++ .../testing/selftests/bpf/verify_sig_setup.sh | 104 +++++ 24 files changed, 1374 insertions(+), 35 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/kfunc_dynptr_param.c create mode 100644 tools/testing/selftests/bpf/prog_tests/lookup_key.c create mode 100644 tools/testing/selftests/bpf/prog_tests/verify_pkcs7_sig.c create mode 100644 tools/testing/selftests/bpf/progs/test_kfunc_dynptr_param.c create mode 100644 tools/testing/selftests/bpf/progs/test_lookup_key.c create mode 100644 tools/testing/selftests/bpf/progs/test_verify_pkcs7_sig.c create mode 100755 tools/testing/selftests/bpf/verify_sig_setup.sh -- 2.25.1

2 years, 10 months

1
14
0 0

[PATCH] selftests: pidfd: Fix compling warnings

by Li Zhijian

Fix warnings and enable Wall Signed-off-by: Li Zhijian <lizhijian(a)fujitsu.com> --- tools/testing/selftests/pidfd/Makefile | 2 +- tools/testing/selftests/pidfd/pidfd_test.c | 2 ++ tools/testing/selftests/pidfd/pidfd_wait.c | 2 +- 3 files changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/pidfd/Makefile b/tools/testing/selftests/pidfd/Makefile index f4a2f28f926b..778b6cdc8aed 100644 --- a/tools/testing/selftests/pidfd/Makefile +++ b/tools/testing/selftests/pidfd/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -CFLAGS += -g -I../../../../usr/include/ -pthread +CFLAGS += -g -I../../../../usr/include/ -pthread -Wall TEST_GEN_PROGS := pidfd_test pidfd_fdinfo_test pidfd_open_test \ pidfd_poll_test pidfd_wait pidfd_getfd_test pidfd_setns_test diff --git a/tools/testing/selftests/pidfd/pidfd_test.c b/tools/testing/selftests/pidfd/pidfd_test.c index 9a2d64901d59..d36654265b7a 100644 --- a/tools/testing/selftests/pidfd/pidfd_test.c +++ b/tools/testing/selftests/pidfd/pidfd_test.c @@ -435,6 +435,8 @@ static int child_poll_exec_test(void *args) */ while (1) sleep(1); + + return 0; } static void test_pidfd_poll_exec(int use_waitpid) diff --git a/tools/testing/selftests/pidfd/pidfd_wait.c b/tools/testing/selftests/pidfd/pidfd_wait.c index c3e2a3041f55..2dee6223112c 100644 --- a/tools/testing/selftests/pidfd/pidfd_wait.c +++ b/tools/testing/selftests/pidfd/pidfd_wait.c @@ -148,7 +148,7 @@ static int sys_waitid(int which, pid_t pid, siginfo_t *info, int options, TEST(wait_nonblock) { - int pidfd, status = 0; + int pidfd = 0; unsigned int flags = 0; pid_t parent_tid = -1; struct clone_args args = { -- 1.8.3.1

2 years, 10 months

1
0
0 0

[PATCH v2] net-next: Fix IP_UNICAST_IF option behavior for connected sockets

by Richard Gobert

The IP_UNICAST_IF socket option is used to set the outgoing interface for outbound packets. The IP_UNICAST_IF socket option was added as it was needed by the Wine project, since no other existing option (SO_BINDTODEVICE socket option, IP_PKTINFO socket option or the bind function) provided the needed characteristics needed by the IP_UNICAST_IF socket option. [1] The IP_UNICAST_IF socket option works well for unconnected sockets, that is, the interface specified by the IP_UNICAST_IF socket option is taken into consideration in the route lookup process when a packet is being sent. However, for connected sockets, the outbound interface is chosen when connecting the socket, and in the route lookup process which is done when a packet is being sent, the interface specified by the IP_UNICAST_IF socket option is being ignored. This inconsistent behavior was reported and discussed in an issue opened on systemd's GitHub project [2]. Also, a bug report was submitted in the kernel's bugzilla [3]. To understand the problem in more detail, we can look at what happens for UDP packets over IPv4 (The same analysis was done separately in the referenced systemd issue). When a UDP packet is sent the udp_sendmsg function gets called and the following happens: 1. The oif member of the struct ipcm_cookie ipc (which stores the output interface of the packet) is initialized by the ipcm_init_sk function to inet->sk.sk_bound_dev_if (the device set by the SO_BINDTODEVICE socket option). 2. If the IP_PKTINFO socket option was set, the oif member gets overridden by the call to the ip_cmsg_send function. 3. If no output interface was selected yet, the interface specified by the IP_UNICAST_IF socket option is used. 4. If the socket is connected and no destination address is specified in the send function, the struct ipcm_cookie ipc is not taken into consideration and the cached route, that was calculated in the connect function is being used. Thus, for a connected socket, the IP_UNICAST_IF sockopt isn't taken into consideration. This patch corrects the behavior of the IP_UNICAST_IF socket option for connect()ed sockets by taking into consideration the IP_UNICAST_IF sockopt when connecting the socket. In order to avoid reconnecting the socket, this option is still ignored when applied on an already connected socket until connect() is called again by the Richard Gobert. Change the __ip4_datagram_connect function, which is called during socket connection, to take into consideration the interface set by the IP_UNICAST_IF socket option, in a similar way to what is done in the udp_sendmsg function. [1] https://lore.kernel.org/netdev/1328685717.4736.4.camel@edumazet-laptop/T/ [2] https://github.com/systemd/systemd/issues/11935#issuecomment-618691018 [3] https://bugzilla.kernel.org/show_bug.cgi?id=210255 Signed-off-by: Richard Gobert <richardbgobert(a)gmail.com> --- v1 -> v2: Added self-tests and targeted to net-next. net/ipv4/datagram.c | 2 ++ tools/testing/selftests/net/fcnal-test.sh | 30 +++++++++++++++++++++++ tools/testing/selftests/net/nettest.c | 16 ++++++++++-- 3 files changed, 46 insertions(+), 2 deletions(-) diff --git a/net/ipv4/datagram.c b/net/ipv4/datagram.c index ffd57523331f..405a8c2aea64 100644 --- a/net/ipv4/datagram.c +++ b/net/ipv4/datagram.c @@ -42,6 +42,8 @@ int __ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len oif = inet->mc_index; if (!saddr) saddr = inet->mc_addr; + } else if (!oif) { + oif = inet->uc_index; } fl4 = &inet->cork.fl.u.ip4; rt = ip_route_connect(fl4, usin->sin_addr.s_addr, saddr, oif, diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 03b586760164..31c3b6ebd388 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -1466,6 +1466,13 @@ ipv4_udp_novrf() run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP} log_test_addr ${a} $? 0 "Client, device bind via IP_UNICAST_IF" + log_start + run_cmd_nsb nettest -D -s & + sleep 1 + run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP} -U + log_test_addr ${a} $? 0 "Client, device bind via IP_UNICAST_IF, with connect()" + + log_start show_hint "Should fail 'Connection refused'" run_cmd nettest -D -r ${a} @@ -1525,6 +1532,13 @@ ipv4_udp_novrf() run_cmd nettest -D -d ${NSA_DEV} -S -r ${a} log_test_addr ${a} $? 0 "Global server, device client via IP_UNICAST_IF, local connection" + log_start + run_cmd nettest -s -D & + sleep 1 + run_cmd nettest -D -d ${NSA_DEV} -S -r ${a} -U + log_test_addr ${a} $? 0 "Global server, device client via IP_UNICAST_IF, local connection, with connect()" + + # IPv4 with device bind has really weird behavior - it overrides the # fib lookup, generates an rtable and tries to send the packet. This # causes failures for local traffic at different places @@ -1550,6 +1564,15 @@ ipv4_udp_novrf() sleep 1 run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection" + + log_start + show_hint "Should fail since addresses on loopback are out of device scope" + run_cmd nettest -D -s & + sleep 1 + run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -U + log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection, with connect()" + + done a=${NSA_IP} @@ -3157,6 +3180,13 @@ ipv6_udp_novrf() sleep 1 run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection" + + log_start + show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" + run_cmd nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S -U + log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection, with connect()" done a=${NSA_IP6} diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c index d9a6fd2cd9d3..7900fa98eccb 100644 --- a/tools/testing/selftests/net/nettest.c +++ b/tools/testing/selftests/net/nettest.c @@ -127,6 +127,9 @@ struct sock_args { /* ESP in UDP encap test */ int use_xfrm; + + /* use send() and connect() instead of sendto */ + int datagram_connect; }; static int server_mode; @@ -979,6 +982,11 @@ static int send_msg(int sd, void *addr, socklen_t alen, struct sock_args *args) log_err_errno("write failed sending msg to peer"); return 1; } + } else if (args->datagram_connect) { + if (send(sd, msg, msglen, 0) < 0) { + log_err_errno("send failed sending msg to peer"); + return 1; + } } else if (args->ifindex && args->use_cmsg) { if (send_msg_cmsg(sd, addr, alen, args->ifindex, args->version)) return 1; @@ -1659,7 +1667,7 @@ static int connectsock(void *addr, socklen_t alen, struct sock_args *args) if (args->has_local_ip && bind_socket(sd, args)) goto err; - if (args->type != SOCK_STREAM) + if (args->type != SOCK_STREAM && !args->datagram_connect) goto out; if (args->password && tcp_md5sig(sd, addr, alen, args)) @@ -1854,7 +1862,7 @@ static int ipc_parent(int cpid, int fd, struct sock_args *args) return client_status; } -#define GETOPT_STR "sr:l:c:p:t:g:P:DRn:M:X:m:d:I:BN:O:SCi6xL:0:1:2:3:Fbqf" +#define GETOPT_STR "sr:l:c:p:t:g:P:DRn:M:X:m:d:I:BN:O:SUCi6xL:0:1:2:3:Fbqf" #define OPT_FORCE_BIND_KEY_IFINDEX 1001 #define OPT_NO_BIND_KEY_IFINDEX 1002 @@ -1891,6 +1899,7 @@ static void print_usage(char *prog) " -I dev bind socket to given device name - server mode\n" " -S use setsockopt (IP_UNICAST_IF or IP_MULTICAST_IF)\n" " to set device binding\n" + " -U Use connect() and send() for datagram sockets\n" " -f bind socket with the IP[V6]_FREEBIND option\n" " -C use cmsg and IP_PKTINFO to specify device binding\n" "\n" @@ -2074,6 +2083,9 @@ int main(int argc, char *argv[]) case 'x': args.use_xfrm = 1; break; + case 'U': + args.datagram_connect = 1; + break; default: print_usage(argv[0]); return 1; -- 2.36.1

2 years, 10 months

3
2
0 0

[PATCH net 0/3] Unsync addresses from ports when stopping aggregated devices

by Benjamin Poirier

This series fixes similar problems in the bonding and team drivers. Because of missing dev_{uc,mc}_unsync() calls, addresses added to underlying devices may be leftover after the aggregated device is deleted. Add the missing calls and a few related tests. Benjamin Poirier (3): net: bonding: Unsync device addresses on ndo_stop net: team: Unsync device addresses on ndo_stop net: Add tests for bonding and team address list management MAINTAINERS | 1 + drivers/net/bonding/bond_main.c | 31 ++++--- drivers/net/team/team.c | 8 ++ tools/testing/selftests/Makefile | 1 + .../selftests/drivers/net/bonding/Makefile | 3 +- .../selftests/drivers/net/bonding/config | 1 + .../drivers/net/bonding/dev_addr_lists.sh | 89 +++++++++++++++++++ .../selftests/drivers/net/bonding/lag_lib.sh | 63 +++++++++++++ .../selftests/drivers/net/team/Makefile | 6 ++ .../testing/selftests/drivers/net/team/config | 3 + .../drivers/net/team/dev_addr_lists.sh | 51 +++++++++++ 11 files changed, 246 insertions(+), 11 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/dev_addr_lists.sh create mode 100644 tools/testing/selftests/drivers/net/bonding/lag_lib.sh create mode 100644 tools/testing/selftests/drivers/net/team/Makefile create mode 100644 tools/testing/selftests/drivers/net/team/config create mode 100755 tools/testing/selftests/drivers/net/team/dev_addr_lists.sh -- 2.36.1

2 years, 10 months

2
6
0 0

[PATCH -next 0/5] Optimize and bugfix for cpu-on-off-test.sh

by Zhao Gongyi

1. Correct log info 2. Replace exit with return to make the test exit gracefully 3. Delete fault injection related code 4. Reserve one cpu online when the test offline all cpus 5. Add log info when run full test successfully Zhao Gongyi (5): selftests/cpu-hotplug: Correct log info selftests/cpu-hotplug: Replace exit with return selftests/cpu-hotplug: Delete fault injection related code selftests/cpu-hotplug: Reserve one cpu online at least selftests/cpu-hotplug: Add log info when test success tools/testing/selftests/cpu-hotplug/Makefile | 2 +- tools/testing/selftests/cpu-hotplug/config | 1 - .../selftests/cpu-hotplug/cpu-on-off-test.sh | 150 ++++-------------- 3 files changed, 29 insertions(+), 124 deletions(-) delete mode 100644 tools/testing/selftests/cpu-hotplug/config -- 2.17.1

2 years, 10 months

2
7
0 0

[PATCH v2 5/6] selftests/sgx: retry the ioctls returned with EAGAIN

by Jarkko Sakkinen

From: Haitao Huang <haitao.huang(a)linux.intel.com> For EMODT and EREMOVE ioctls with a large range, kernel may not finish in one shot and return EAGAIN error code and count of bytes of EPC pages on that operations are finished successfully. Change the unclobbered_vdso_oversubscribed_remove test to rerun the ioctls in a loop, updating offset and length using the byte count returned in each iteration. Signed-off-by: Haitao Huang <haitao.huang(a)linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko(a)kernel.org> --- v2: * Changed branching in EAGAIN condition so that else branch is not required. * Addressed Reinette's feedback: https://lore.kernel.org/linux-sgx/5d19be91-3aef-5cbe-6063-3ff3dbd5572b@inte… --- tools/testing/selftests/sgx/main.c | 42 ++++++++++++++++++++++++------ 1 file changed, 34 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c index c5aa9f323745..f42941da3bbe 100644 --- a/tools/testing/selftests/sgx/main.c +++ b/tools/testing/selftests/sgx/main.c @@ -395,6 +395,7 @@ TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900) struct encl_segment *heap; unsigned long total_mem; int ret, errno_save; + unsigned long count; unsigned long addr; unsigned long i; @@ -458,16 +459,30 @@ TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900) modt_ioc.offset = heap->offset; modt_ioc.length = heap->size; modt_ioc.page_type = SGX_PAGE_TYPE_TRIM; - + count = 0; TH_LOG("Changing type of %zd bytes to trimmed may take a while ...", heap->size); - ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &modt_ioc); - errno_save = ret == -1 ? errno : 0; + do { + ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &modt_ioc); + + errno_save = ret == -1 ? errno : 0; + if (errno_save != EAGAIN) + break; + + EXPECT_EQ(modt_ioc.result, 0); + + count += modt_ioc.count; + modt_ioc.offset += modt_ioc.count; + modt_ioc.length -= modt_ioc.count; + modt_ioc.result = 0; + modt_ioc.count = 0; + } while (modt_ioc.length != 0); EXPECT_EQ(ret, 0); EXPECT_EQ(errno_save, 0); EXPECT_EQ(modt_ioc.result, 0); - EXPECT_EQ(modt_ioc.count, heap->size); + count += modt_ioc.count; + EXPECT_EQ(count, heap->size); /* EACCEPT all removed pages. */ addr = self->encl.encl_base + heap->offset; @@ -495,15 +510,26 @@ TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900) remove_ioc.offset = heap->offset; remove_ioc.length = heap->size; - + count = 0; TH_LOG("Removing %zd bytes from enclave may take a while ...", heap->size); - ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_REMOVE_PAGES, &remove_ioc); - errno_save = ret == -1 ? errno : 0; + do { + ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_REMOVE_PAGES, &remove_ioc); + + errno_save = ret == -1 ? errno : 0; + if (errno_save != EAGAIN) + break; + + count += remove_ioc.count; + remove_ioc.offset += remove_ioc.count; + remove_ioc.length -= remove_ioc.count; + remove_ioc.count = 0; + } while (remove_ioc.length != 0); EXPECT_EQ(ret, 0); EXPECT_EQ(errno_save, 0); - EXPECT_EQ(remove_ioc.count, heap->size); + count += remove_ioc.count; + EXPECT_EQ(count, heap->size); } TEST_F(enclave, clobbered_vdso) -- 2.37.2

2 years, 10 months

2
1
0 0

[PATCH v2 1/6] selftests/sgx: Ignore OpenSSL 3.0 deprecated functions warning

by Jarkko Sakkinen

From: Kristen Carlson Accardi <kristen(a)linux.intel.com> OpenSSL 3.0 deprecates some of the functions used in the SGX selftests, causing build errors on new distros. For now ignore the warnings until support for the functions is no longer available and mark FIXME so that it can be clear this should be removed at some point. Signed-off-by: Kristen Carlson Accardi <kristen(a)linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko(a)kernel.org> --- v2: - Kept because does not exist in tip/x86/sgx, which is the maintainer branch for SGX, and is required for selftests. --- tools/testing/selftests/sgx/sigstruct.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/tools/testing/selftests/sgx/sigstruct.c b/tools/testing/selftests/sgx/sigstruct.c index 50c5ab1aa6fa..a07896a46364 100644 --- a/tools/testing/selftests/sgx/sigstruct.c +++ b/tools/testing/selftests/sgx/sigstruct.c @@ -17,6 +17,12 @@ #include "defines.h" #include "main.h" +/* + * FIXME: OpenSSL 3.0 has deprecated some functions. For now just ignore + * the warnings. + */ +#pragma GCC diagnostic ignored "-Wdeprecated-declarations" + struct q1q2_ctx { BN_CTX *bn_ctx; BIGNUM *m; -- 2.37.2

2 years, 10 months

1
0
0 0

[PATCH linux-next] powerpc/selftests:Use timersub() for gettimeofday()

by cgel.zte＠gmail.com

From: ye xingchen <ye.xingchen(a)zte.com.cn> Use timersub() function to simplify the code. Reported-by: Zeal Robot <zealci(a)zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen(a)zte.com.cn> --- tools/testing/selftests/powerpc/benchmarks/gettimeofday.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/powerpc/benchmarks/gettimeofday.c b/tools/testing/selftests/powerpc/benchmarks/gettimeofday.c index 6b415683357b..580fcac0a09f 100644 --- a/tools/testing/selftests/powerpc/benchmarks/gettimeofday.c +++ b/tools/testing/selftests/powerpc/benchmarks/gettimeofday.c @@ -12,7 +12,7 @@ static int test_gettimeofday(void) { int i; - struct timeval tv_start, tv_end; + struct timeval tv_start, tv_end, tv_diff; gettimeofday(&tv_start, NULL); @@ -20,7 +20,9 @@ static int test_gettimeofday(void) gettimeofday(&tv_end, NULL); } - printf("time = %.6f\n", tv_end.tv_sec - tv_start.tv_sec + (tv_end.tv_usec - tv_start.tv_usec) * 1e-6); + timersub(&tv_start, &tv_end, &tv_diff); + + printf("time = %.6f\n", tv_diff.tv_sec + (tv_diff.tv_usec) * 1e-6); return 0; } -- 2.25.1

2 years, 10 months

2
1
0 0

[PATCH] selftests/sgx: Fix OpenSSL deprecated warning for ERR_get_error_line

by Dhanuka Warusadura

These changes fix the "error: ‘ERR_get_error_line’ is deprecated: Since OpenSSL 3.0" warning. Signed-off-by: Dhanuka Warusadura <wdnuka(a)gmail.com> --- tools/testing/selftests/sgx/sigstruct.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/sgx/sigstruct.c b/tools/testing/selftests/sgx/sigstruct.c index 50c5ab1aa6fa..671d9b58e274 100644 --- a/tools/testing/selftests/sgx/sigstruct.c +++ b/tools/testing/selftests/sgx/sigstruct.c @@ -136,7 +136,7 @@ static bool check_crypto_errors(void) break; had_errors = true; - err = ERR_get_error_line(&filename, &line); + err = ERR_peek_last_error_line(&filename, &line); ERR_error_string_n(err, str, sizeof(str)); fprintf(stderr, "crypto: %s: %s:%d\n", str, filename, line); } -- 2.37.2

2 years, 10 months

3
6
0 0

Copie de : Bild: Investieren Sie einmal 250 $ und erhalten Sie ab 1000 $ pro Tag

by Galerie Raymond Dreyfus

Ceci est une copie du message que vous avez envoyé à Galerie Raymond Dreyfus via Galerie Raymond Dreyfus Ceci est un message expédié via http://www.raymond-dreyfus.com/ par : JosephZem <linux-kselftest(a)vger.kernel.org> TOP 3 Handelsroboter, die Menschen zu Millionaren machen http://bitcoin-obituaries.beersec.com/dayli-news-8902

2 years, 10 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror