- Linux-kselftest-mirror - lists.linaro.org

[net-next] Fix reinitialization of TEST_PROGS in net self tests.

by Adel Abouchaev

Fix reinitialization of TEST_PROGS in net self tests. Signed-off-by: Adel Abouchaev <adel.abushaev(a)gmail.com> --- tools/testing/selftests/net/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 11a288b67e2f..4a5978eab848 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -42,7 +42,7 @@ TEST_PROGS += arp_ndisc_evict_nocarrier.sh TEST_PROGS += ndisc_unsolicited_na_test.sh TEST_PROGS += arp_ndisc_untracked_subnets.sh TEST_PROGS += stress_reuseport_listen.sh -TEST_PROGS := l2_tos_ttl_inherit.sh +TEST_PROGS += l2_tos_ttl_inherit.sh TEST_PROGS_EXTENDED := in_netns.sh setup_loopback.sh setup_veth.sh TEST_PROGS_EXTENDED += toeplitz_client.sh toeplitz.sh TEST_GEN_FILES = socket nettest -- 2.30.2

2 years, 10 months

3
2
0 0

Re: [PATCH v4 net-next 3/6] drivers: net: dsa: add locked fdb entry flag to drivers

by netdev＠kapio-technology.com

On 2022-08-11 13:28, Ido Schimmel wrote: >> > I'm talking about roaming, not forwarding. Let's say you have a locked >> > entry with MAC X pointing to port Y. Now you get a packet with SMAC X >> > from port Z which is unlocked. Will the FDB entry roam to port Z? I >> > think it should, but at least in current implementation it seems that >> > the "locked" flag will not be reset and having locked entries pointing >> > to an unlocked port looks like a bug. >> > >> In general I have been thinking that the said setup is a network configuration error as I was arguing in an earlier conversation with Vladimir. In this setup we must remember that SMAC X becomes DMAC X in the return traffic on the open port. But the question arises to me why MAC X would be behind the locked port without getting authed while being behind an open port too? In a real life setup, I don't think you would want random hosts behind a locked port in the MAB case, but only the hosts you will let through. Other hosts should be regarded as intruders. If we are talking about a station move, then the locked entry will age out and MAC X will function normally on the open port after the timeout, which was a case that was taken up in earlier discussions. But I will anyhow do some testing with this 'edge case' (of being behind both a locked and an unlocked port) if I may call it so, and see to that the offloaded and non-offloaded cases correspond to each other, and will work satisfactory. I think it will be good to have a flag to enable the mac-auth/MAB feature, and I suggest just calling the flag 'mab', as it is short. Otherwise I don't see any major issues with the whole feature as it is.

2 years, 10 months

2
21
0 0

[PATCH v2 0/4] Implement IOCTL to get and clear soft dirty PTE

by Muhammad Usama Anjum

Hello, This patch series implements a new ioctl on the pagemap proc fs file to get, clear and perform both get and clear at the same time atomically on the specified range of the memory. Soft-dirty PTE bit of the memory pages can be viewed by using pagemap procfs file. The soft-dirty PTE bit for the whole memory range of the process can be cleared by writing to the clear_refs file. This series adds features that weren't present earlier. - There is no atomic get soft-dirty PTE bit status and clear operation present. - The soft-dirty PTE bit of only a part of memory cannot be cleared. Historically, soft-dirty PTE bit tracking has been used in the CRIU project. The proc fs interface is enough for that as I think the process is frozen. We have the use case where we need to track the soft-dirty PTE bit for the running processes. We need this tracking and clear mechanism of a region of memory while the process is running to emulate the getWriteWatch() syscall of Windows. This syscall is used by games to keep track of dirty pages and keep processing only the dirty pages. This new ioctl can be used by the CRIU project and other applications which require soft-dirty PTE bit information. As in the current kernel there is no way to clear a part of memory (instead of clearing the Soft-Dirty bits for the entire process) and get+clear operation cannot be performed atomically, there are other methods to mimic this information entirely in userspace with poor performance: - The mprotect syscall and SIGSEGV handler for bookkeeping - The userfaultfd syscall with the handler for bookkeeping Some benchmarks can be seen [1]. This ioctl can be used by the CRIU project and other applications which require soft-dirty PTE bit information. The following operations are supported in this ioctl: - Get the pages that are soft-dirty. - Clear the pages which are soft-dirty. - The optional flag to ignore the VM_SOFTDIRTY and only track per page soft-dirty PTE bit There are two decisions which have been taken about how to get the output from the syscall. - Return offsets of the pages from the start in the vec - Stop execution when vec is filled with dirty pages These two arguments doesn't follow the mincore() philosophy where the output array corresponds to the address range in one to one fashion, hence the output buffer length isn't passed and only a flag is set if the page is present. This makes mincore() easy to use with less control. We are passing the size of the output array and putting return data consecutively which is offset of dirty pages from the start. The user can convert these offsets back into the dirty page addresses easily. Suppose, the user want to get first 10 dirty pages from a total memory of 100 pages. He'll allocate output buffer of size 10 and the ioctl will abort after finding the 10 pages. This behaviour is needed to support Windows' getWriteWatch(). The behaviour like mincore() can be achieved by passing output buffer of 100 size. This interface can be used for any desired behaviour. [1] https://lore.kernel.org/lkml/54d4c322-cd6e-eefd-b161-2af2b56aae24@collabora… Regards, Muhammad Usama Anjum Cc: Gabriel Krisman Bertazi <krisman(a)collabora.com> Cc: David Hildenbrand <david(a)redhat.com> Cc: Peter Enderborg <peter.enderborg(a)sony.com> Muhammad Usama Anjum (4): fs/proc/task_mmu: update functions to clear the soft-dirty bit fs/proc/task_mmu: Implement IOCTL to get and clear soft dirty PTE bit selftests: vm: add pagemap ioctl tests mm: add documentation of the new ioctl on pagemap Documentation/admin-guide/mm/soft-dirty.rst | 42 +- fs/proc/task_mmu.c | 337 ++++++++++- include/uapi/linux/fs.h | 13 + tools/include/uapi/linux/fs.h | 13 + tools/testing/selftests/vm/.gitignore | 1 + tools/testing/selftests/vm/Makefile | 2 + tools/testing/selftests/vm/pagemap_ioctl.c | 629 ++++++++++++++++++++ 7 files changed, 1005 insertions(+), 32 deletions(-) create mode 100644 tools/testing/selftests/vm/pagemap_ioctl.c -- 2.30.2

2 years, 10 months

2
7
0 0

[PATCH] selftests/landlock: fix broken include of linux/landlock.h

by Guillaume Tucker

Revert part of the earlier changes to fix the kselftest build when using a sub-directory from the top of the tree as this broke the landlock test build as a side-effect when building with "make -C tools/testing/selftests/landlock". Reported-by: Mickaël Salaün <mic(a)digikod.net> Fixes: a917dd94b832 ("selftests/landlock: drop deprecated headers dependency") Fixes: f2745dc0ba3d ("selftests: stop using KSFT_KHDR_INSTALL") Signed-off-by: Guillaume Tucker <guillaume.tucker(a)collabora.com> --- tools/testing/selftests/landlock/Makefile | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/landlock/Makefile b/tools/testing/selftests/landlock/Makefile index a6959df28eb0..02868ac3bc71 100644 --- a/tools/testing/selftests/landlock/Makefile +++ b/tools/testing/selftests/landlock/Makefile @@ -9,10 +9,13 @@ TEST_GEN_PROGS := $(src_test:.c=) TEST_GEN_PROGS_EXTENDED := true OVERRIDE_TARGETS := 1 +top_srcdir := ../../../.. include ../lib.mk +khdr_dir = $(top_srcdir)/usr/include + $(OUTPUT)/true: true.c $(LINK.c) $< $(LDLIBS) -o $@ -static -$(OUTPUT)/%_test: %_test.c ../kselftest_harness.h common.h - $(LINK.c) $< $(LDLIBS) -o $@ -lcap +$(OUTPUT)/%_test: %_test.c $(khdr_dir)/linux/landlock.h ../kselftest_harness.h common.h + $(LINK.c) $< $(LDLIBS) -o $@ -lcap -I$(khdr_dir) -- 2.30.2

2 years, 10 months

4
11
0 0

[PATCH bpf-next,v3] selftests/bpf: add lwt ip encap tests to test_progs

by Eyal Birger

Port test_lwt_ip_encap.sh tests onto test_progs. In addition, this commit adds "egress_md" tests which test a similar flow as egress tests only they use gre devices in collect_md mode for encapsulation and set the tunnel key using bpf_set_tunnel_key(). This introduces minor changes to the test setup and test_lwt_ip_encap.c: - GRE key must exist as bpf_set_tunnel_key() explicitly sets the TUNNEL_KEY flag - Source address for GRE traffic is set to IP*_5 instead of IP*_1 since GRE traffic is sent via veth5 so its address is selected when using bpf_set_tunnel_key() Note: currently these programs use the legacy section name convention as iproute2 lwt configuration does not support providing function names. Since the shell version is not routinely tested, remove it and rely on the C version. Signed-off-by: Eyal Birger <eyal.birger(a)gmail.com> ---- v2: remove lwt_ip_encap.sh v2: - set CONFIG_NET_VRF and CONFIG_NET_L3_MASTER_DEV in reference .config - add wait after sending large packet to allow it to get delivered as in the .sh test --- tools/testing/selftests/bpf/Makefile | 1 - tools/testing/selftests/bpf/config | 2 + .../selftests/bpf/prog_tests/lwt_ip_encap.c | 585 ++++++++++++++++++ .../selftests/bpf/progs/test_lwt_ip_encap.c | 51 +- .../selftests/bpf/test_lwt_ip_encap.sh | 475 -------------- 5 files changed, 634 insertions(+), 480 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c delete mode 100755 tools/testing/selftests/bpf/test_lwt_ip_encap.sh diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index eecad99f1735..39b675cc4ca9 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -63,7 +63,6 @@ TEST_PROGS := test_kmod.sh \ test_flow_dissector.sh \ test_xdp_vlan_mode_generic.sh \ test_xdp_vlan_mode_native.sh \ - test_lwt_ip_encap.sh \ test_tcp_check_syncookie.sh \ test_tc_tunnel.sh \ test_tc_edt.sh \ diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config index 3fc46f9cfb22..04cc64e334ef 100644 --- a/tools/testing/selftests/bpf/config +++ b/tools/testing/selftests/bpf/config @@ -64,3 +64,5 @@ CONFIG_TEST_BPF=m CONFIG_USERFAULTFD=y CONFIG_VXLAN=y CONFIG_XDP_SOCKETS=y +CONFIG_NET_VRF=y +CONFIG_NET_L3_MASTER_DEV=y diff --git a/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c b/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c new file mode 100644 index 000000000000..986c06d1bda1 --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c @@ -0,0 +1,585 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause + +/* Setup/topology: + * + * NS1 NS2 NS3 + * veth1 <---> veth2 veth3 <---> veth4 (the top route) + * veth5 <---> veth6 veth7 <---> veth8 (the bottom route) + * + * each vethN gets IP[4|6]_N address + * + * IP*_SRC = IP*_1 + * IP*_DST = IP*_4 + * + * all tests test pings from IP*_SRC to IP*_DST + * + * by default, routes are configured to allow packets to go + * IP*_1 <=> IP*_2 <=> IP*_3 <=> IP*_4 (the top route) + * + * a GRE device is installed in NS3 with IP*_GRE, and + * NS1/NS2 are configured to route packets to IP*_GRE via IP*_8 + * (the bottom route) + * + * Tests: + * + * 1. routes NS2->IP*_DST are brought down, so the only way a ping + * from IP*_SRC to IP*_DST can work is via IP*_GRE + * + * 2a. in an egress test, a bpf LWT_XMIT program is installed on veth1 + * that encaps the packets with an IP/GRE header to route to IP*_GRE + * + * ping: SRC->[encap at veth1:egress]->GRE:decap->DST + * ping replies go DST->SRC directly + * + * 2b. in an ingress test, a bpf LWT_IN program is installed on veth2 + * that encaps the packets with an IP/GRE header to route to IP*_GRE + * + * ping: SRC->[encap at veth2:ingress]->GRE:decap->DST + * ping replies go DST->SRC directly + * + * 2c. in an egress_md test, a bpf LWT_XMIT program is installed on a + * route towards collect_md gre{,6} devices in NS1 and sets the tunnel + * key such that packets are encapsulated with an IP/GRE header to route + * to IP*_GRE + * + * ping: SRC->[encap at gre{,6}_md:xmit]->GRE:decap->DST + * ping replies go DST->SRC directly + */ + +#include "test_progs.h" +#include "network_helpers.h" + +#define NS_1 "ns_lwt_1" +#define NS_2 "ns_lwt_2" +#define NS_3 "ns_lwt_3" + +#define IP4_1 "172.16.1.100" +#define IP4_2 "172.16.2.100" +#define IP4_3 "172.16.3.100" +#define IP4_4 "172.16.4.100" +#define IP4_5 "172.16.5.100" +#define IP4_6 "172.16.6.100" +#define IP4_7 "172.16.7.100" +#define IP4_8 "172.16.8.100" +#define IP4_GRE "172.16.16.100" +#define IP4_DST IP4_4 + +#define IP6_1 "fb01::1" +#define IP6_2 "fb02::1" +#define IP6_3 "fb03::1" +#define IP6_4 "fb04::1" +#define IP6_5 "fb05::1" +#define IP6_6 "fb06::1" +#define IP6_7 "fb07::1" +#define IP6_8 "fb08::1" +#define IP6_GRE "fb10::1" +#define IP6_DST IP6_4 + +#define TEST_VRF_NAME "red" + +static const char * const namespaces[] = {NS_1, NS_2, NS_3, NULL}; +static __u32 duration; +static bool use_vrf; + +enum encap_type { + ENCAP_EGRESS, + ENCAP_INGRESS, + ENCAP_EGRESS_MD, +}; + +#define SYS(fmt, ...) \ + ({ \ + char cmd[1024]; \ + snprintf(cmd, sizeof(cmd), fmt, ##__VA_ARGS__); \ + if (!ASSERT_OK(system(cmd), cmd)) \ + goto fail; \ + }) + +#define ADD_VETH_PAIR(v1, ns1, v2, ns2) \ + SYS("ip link add " v1 " netns " ns1 " type veth " \ + "peer name " v2 " netns " ns2) + +#define SET_NS_ROUTE(op, netns, family, fmt, ...) \ + SYS("ip %s%s %s route " op " %s " fmt, \ + netns[0] ? "-netns " : "", netns[0] ? netns : "", \ + family == AF_INET6 ? "-6" : "", \ + use_vrf ? "vrf " TEST_VRF_NAME : "", \ + ##__VA_ARGS__) + +#define SET_NS_ADDR_ROUTE(op, netns, addr, fmt, ...) \ + ({ \ + int family = strchr(addr, ':') ? AF_INET6 : AF_INET; \ + SET_NS_ROUTE(op, netns, family, addr "%s " fmt, \ + family == AF_INET6 ? "/128" : "/32", \ + ##__VA_ARGS__); \ + }) + +#define ADD_ROUTE(family, ...) SET_NS_ROUTE("add", "", family, ##__VA_ARGS__) + +#define ADD_ADDR_ROUTE(...) SET_NS_ADDR_ROUTE("add", "", ##__VA_ARGS__) + +static int write_sysctl(const char *sysctl, const char *value) +{ + int fd, err, len; + + fd = open(sysctl, O_WRONLY); + if (CHECK(fd == -1, "open sysctl", "open(%s): %s (%d)\n", + sysctl, strerror(errno), errno)) + return -1; + + len = strlen(value); + err = write(fd, value, len); + close(fd); + if (CHECK(err != len, "write sysctl", + "write(%s, %s): err:%d %s (%d)\n", + sysctl, value, err, strerror(errno), errno)) + return -1; + + return 0; +} + +static int setup_namespaces(const char *verb) +{ + const char * const *ns = namespaces; + + while (*ns) { + SYS("ip netns %s %s", verb, *ns); + ns++; + } + return 0; +fail: + return -1; +} + +static void setup_namespaces_nofail(const char *verb) +{ + const char * const *ns = namespaces; + char cmd[128]; + + while (*ns) { + snprintf(cmd, sizeof(cmd), "ip netns %s %s > /dev/null 2>&1", + verb, *ns); + system(cmd); + ns++; + } +} + +static int setup_ns(const char *ns, int (*ns_setup_fn)(void)) +{ + struct nstoken *nstoken; + int err = -1; + + nstoken = open_netns(ns); + if (!ASSERT_OK_PTR(nstoken, "setns")) + return -1; + + /* rp_filter gets confused by what these tests are doing, + * so disable it. + * also disable IPv6 DAD because it sometimes takes too long and fails + * tests. + */ + if (write_sysctl("/proc/sys/net/ipv4/conf/all/rp_filter", "0") || + write_sysctl("/proc/sys/net/ipv4/conf/default/rp_filter", "0") || + write_sysctl("/proc/sys/net/ipv6/conf/all/accept_dad", "0") || + write_sysctl("/proc/sys/net/ipv6/conf/default/accept_dad", "0")) + goto exit; + + err = ns_setup_fn(); + +exit: + close_netns(nstoken); + return err; +} + +static int setup_device(const char *devname, const char *addr4, + const char *addr6) +{ + if (use_vrf) + SYS("ip link set %s vrf %s", devname, TEST_VRF_NAME); + + if (addr4) + SYS("ip addr add %s/24 dev %s", addr4, devname); + + if (addr6) + SYS("ip -6 addr add %s/128 nodad dev %s", addr6, devname); + + SYS("ip link set dev %s up", devname); + return 0; +fail: + return -1; +} + +static int setup_vrf(void) +{ + SYS("ip link add %s type vrf table 1001", TEST_VRF_NAME); + SYS("ip link set dev %s up", TEST_VRF_NAME); + SYS("ip route add table 1001 unreachable default metric 8192"); + SYS("ip -6 route add table 1001 unreachable default metric 8192"); + return 0; +fail: + return -1; +} + +static int setup_ns1(void) +{ + if (use_vrf && setup_vrf()) + goto fail; + + SYS("ip link add gre_md type gre external"); + SYS("ip link add gre6_md type ip6gre external"); + + if (setup_device("veth1", IP4_1, IP6_1) || + setup_device("veth5", IP4_5, IP6_5) || + setup_device("gre_md", IP4_1, IP6_1) || + setup_device("gre6_md", IP4_1, IP6_1)) + goto fail; + + /* Top route */ + ADD_ADDR_ROUTE(IP4_2, "dev veth1"); + ADD_ADDR_ROUTE(IP6_2, "dev veth1"); + ADD_ROUTE(AF_INET, "default dev veth1 via " IP4_2); + ADD_ROUTE(AF_INET6, "default dev veth1 via " IP6_2); + + /* Bottom route */ + ADD_ADDR_ROUTE(IP4_6, "dev veth5"); + ADD_ADDR_ROUTE(IP4_7, "dev veth5 via " IP4_6); + ADD_ADDR_ROUTE(IP4_8, "dev veth5 via " IP4_6); + ADD_ADDR_ROUTE(IP6_6, "dev veth5"); + ADD_ADDR_ROUTE(IP6_7, "dev veth5 via " IP6_6); + ADD_ADDR_ROUTE(IP6_8, "dev veth5 via " IP6_6); + + /* GRE peer via the bottom route */ + ADD_ADDR_ROUTE(IP4_GRE, "dev veth5 via " IP4_6); + ADD_ADDR_ROUTE(IP6_GRE, "dev veth5 via " IP6_6); + return 0; +fail: + return -1; +} + +static int setup_ns2(void) +{ + if (write_sysctl("/proc/sys/net/ipv4/ip_forward", "1") || + write_sysctl("/proc/sys/net/ipv6/conf/all/forwarding", "1")) + goto fail; + + if (use_vrf && setup_vrf()) + goto fail; + + if (setup_device("veth2", IP4_2, IP6_2) || + setup_device("veth3", IP4_3, IP6_3) || + setup_device("veth6", IP4_6, IP6_6) || + setup_device("veth7", IP4_7, IP6_7)) + goto fail; + + /* Top route */ + ADD_ADDR_ROUTE(IP4_1, "dev veth2"); + ADD_ADDR_ROUTE(IP4_4, "dev veth3"); + ADD_ADDR_ROUTE(IP6_1, "dev veth2"); + ADD_ADDR_ROUTE(IP6_4, "dev veth3"); + + /* Bottom route */ + ADD_ADDR_ROUTE(IP4_5, "dev veth6"); + ADD_ADDR_ROUTE(IP4_8, "dev veth7"); + ADD_ADDR_ROUTE(IP6_5, "dev veth6"); + ADD_ADDR_ROUTE(IP6_8, "dev veth7"); + + /* GRE peer via the bottom route */ + ADD_ADDR_ROUTE(IP4_GRE, "dev veth7 via " IP4_8); + ADD_ADDR_ROUTE(IP6_GRE, "dev veth7 via " IP6_8); + return 0; +fail: + return -1; +} + +static int setup_ns3(void) +{ + if (use_vrf && setup_vrf()) + goto fail; + + if (setup_device("veth4", IP4_4, IP6_4) || + setup_device("veth8", IP4_8, IP6_8)) + goto fail; + + /* Top route */ + ADD_ADDR_ROUTE(IP4_3, "dev veth4"); + ADD_ADDR_ROUTE(IP4_1, "dev veth4 via " IP4_3); + ADD_ADDR_ROUTE(IP4_2, "dev veth4 via " IP4_3); + ADD_ADDR_ROUTE(IP6_3, "dev veth4"); + ADD_ADDR_ROUTE(IP6_1, "dev veth4 via " IP6_3); + ADD_ADDR_ROUTE(IP6_2, "dev veth4 via " IP6_3); + + /* Bottom route */ + ADD_ADDR_ROUTE(IP4_7, "dev veth8"); + ADD_ADDR_ROUTE(IP4_5, "dev veth8 via " IP4_7); + ADD_ADDR_ROUTE(IP4_6, "dev veth8 via " IP4_7); + ADD_ADDR_ROUTE(IP6_7, "dev veth8"); + ADD_ADDR_ROUTE(IP6_5, "dev veth8 via " IP6_7); + ADD_ADDR_ROUTE(IP6_6, "dev veth8 via " IP6_7); + + /* configure IPv4 GRE device in NS3, and a route to it via the + * "bottom" route + */ + SYS("ip tunnel add gre_dev mode gre remote " IP4_5 " local " IP4_GRE + " ttl 255 key 0"); + if (setup_device("gre_dev", IP4_GRE, NULL)) + goto fail; + + SYS("ip tunnel add gre6_dev mode ip6gre remote " IP6_5 " local " IP6_GRE + " ttl 255 key 0"); + if (setup_device("gre6_dev", NULL, IP6_GRE)) + goto fail; + + return 0; +fail: + return -1; +} + +static int setup_links_and_routes(void) +{ + ADD_VETH_PAIR("veth1", NS_1, "veth2", NS_2); + ADD_VETH_PAIR("veth3", NS_2, "veth4", NS_3); + ADD_VETH_PAIR("veth5", NS_1, "veth6", NS_2); + ADD_VETH_PAIR("veth7", NS_2, "veth8", NS_3); + + if (setup_ns(NS_1, setup_ns1) || + setup_ns(NS_2, setup_ns2) || + setup_ns(NS_3, setup_ns3)) + goto fail; + + return 0; +fail: + return -1; +} + +static int remove_routes_to_gredev(void) +{ + SET_NS_ADDR_ROUTE("del", NS_1, IP4_GRE, "dev veth5"); + SET_NS_ADDR_ROUTE("del", NS_1, IP6_GRE, "dev veth5"); + SET_NS_ADDR_ROUTE("del", NS_2, IP4_GRE, "dev veth7"); + SET_NS_ADDR_ROUTE("del", NS_2, IP6_GRE, "dev veth7"); +fail: + return -1; +} + +static int add_unreachable_routes_to_gredev(void) +{ + SET_NS_ROUTE("add", NS_1, AF_INET, "unreachable " IP4_GRE "/32"); + SET_NS_ROUTE("add", NS_1, AF_INET6, "unreachable " IP6_GRE "/128"); + SET_NS_ROUTE("add", NS_2, AF_INET, "unreachable " IP4_GRE "/32"); + SET_NS_ROUTE("add", NS_2, AF_INET6, "unreachable " IP6_GRE "/128"); + return 0; +fail: + return -1; +} + +static int test_ping(int family, bool must_fail, bool bindtodev) +{ + const char *addr, *ping_args; + char cmd[1024]; + int ret; + + addr = family == AF_INET ? IP4_DST : IP6_DST; + ping_args = bindtodev ? "-c 1 -W 1 -I veth1" : "-c 1 -W 1"; + snprintf(cmd, sizeof(cmd), + "ip netns exec " NS_1 " %s %s %s > /dev/null", + ping_command(family), ping_args, addr); + ret = system(cmd); + if (!ASSERT_EQ(!!ret, !!must_fail, cmd)) + return -1; + return 0; +} + +#define TIMEOUT_MILLIS 10000 + +static int test_gso(int family, const char *dst) +{ + int listen_fd = -1, accept_fd = -1, client_fd = -1; + struct nstoken *nstoken; + static char buf[5000]; + int n, ret = -1; + + nstoken = open_netns(NS_3); + if (!ASSERT_OK_PTR(nstoken, "setns")) + return -1; + + listen_fd = start_server(family, SOCK_STREAM, dst, 9000, 0); + if (!ASSERT_GE(listen_fd, 0, "listen")) + goto done; + + close_netns(nstoken); + nstoken = open_netns(NS_1); + if (!ASSERT_OK_PTR(nstoken, "setns src")) + goto done; + + client_fd = connect_to_fd(listen_fd, TIMEOUT_MILLIS); + if (!ASSERT_GE(client_fd, 0, "connect_to_fd")) + goto done; + + accept_fd = accept(listen_fd, NULL, NULL); + if (!ASSERT_GE(accept_fd, 0, "accept")) + goto done; + + if (!ASSERT_OK(settimeo(accept_fd, TIMEOUT_MILLIS), "settimeo")) + goto done; + + /* Send a packet larger than the MTU */ + n = write(client_fd, buf, sizeof(buf)); + if (!ASSERT_EQ(n, sizeof(buf), "send to server")) + goto done; + + sleep(2); /* let the packet get delivered */ + + n = read(accept_fd, buf, sizeof(buf)); + ASSERT_EQ(n, sizeof(buf), "recv from server"); + + ret = 0; + +done: + if (nstoken) + close_netns(nstoken); + if (listen_fd >= 0) + close(listen_fd); + if (accept_fd >= 0) + close(accept_fd); + if (client_fd >= 0) + close(client_fd); + return ret; +} + +static void lwt_ip_encap_test(int encap_family, enum encap_type encap_type) +{ + const char *prog_sec, *encap_dev, *lwt_type, *encap_ns; + bool bindtodev = true; + + if (!ASSERT_OK(setup_namespaces("add"), "setup namespaces")) + return; + if (!ASSERT_OK(setup_links_and_routes(), + "setup links and routes")) + goto fail; + + sleep(2); /* reduce flakiness */ + + /* by default, pings work */ + test_ping(AF_INET, false, bindtodev); + test_ping(AF_INET6, false, bindtodev); + + /* remove NS2->DST routes, ping fails */ + SET_NS_ADDR_ROUTE("del", NS_2, IP4_DST, "dev veth3"); + SET_NS_ADDR_ROUTE("del", NS_2, IP6_DST, "dev veth3"); + + test_ping(AF_INET, true, bindtodev); + test_ping(AF_INET6, true, bindtodev); + + prog_sec = encap_family == AF_INET ? "encap_gre" : "encap_gre6"; + + switch (encap_type) { + case ENCAP_EGRESS: + encap_dev = "veth1"; + lwt_type = "xmit"; + encap_ns = NS_1; + break; + case ENCAP_INGRESS: + encap_dev = "veth2"; + lwt_type = "in"; + encap_ns = NS_2; + break; + case ENCAP_EGRESS_MD: + switch (encap_family) { + case AF_INET: + prog_sec = "encap_gre_md"; + encap_dev = "gre_md"; + break; + case AF_INET6: + prog_sec = "encap_gre6_md"; + encap_dev = "gre6_md"; + break; + default: + goto fail; + } + lwt_type = "xmit"; + encap_ns = NS_1; + break; + default: + goto fail; + } + + /* install replacement routes (LWT/eBPF), pings succeed */ + SET_NS_ADDR_ROUTE("add", encap_ns, IP4_DST, + "encap bpf %s obj test_lwt_ip_encap.o sec %s dev %s", + lwt_type, prog_sec, encap_dev); + SET_NS_ADDR_ROUTE("add", encap_ns, IP6_DST, + "encap bpf %s obj test_lwt_ip_encap.o sec %s dev %s", + lwt_type, prog_sec, encap_dev); + + /* binding to device doesn't work for egress_md tests as routing is + * asymmetrical + */ + bindtodev = encap_type != ENCAP_EGRESS_MD; + test_ping(AF_INET, false, bindtodev); + test_ping(AF_INET6, false, bindtodev); + + /* VRF is complex for testing GSO in this setup */ + if (!use_vrf && encap_type != ENCAP_INGRESS) { + test_gso(AF_INET, IP4_DST); + test_gso(AF_INET6, IP6_DST); + } + + /* a negative test: remove routes to GRE devices: ping fails */ + if (remove_routes_to_gredev()) + goto fail; + + test_ping(AF_INET, true, bindtodev); + test_ping(AF_INET6, true, bindtodev); + + if (add_unreachable_routes_to_gredev()) + goto fail; + + test_ping(AF_INET, true, bindtodev); + test_ping(AF_INET6, true, bindtodev); +fail: + setup_namespaces("delete"); +} + +#define RUN_TEST(name, family, encap_type, _use_vrf) \ + ({ \ + if (test__start_subtest(name)) { \ + use_vrf = _use_vrf; \ + lwt_ip_encap_test(family, encap_type); \ + } \ + }) + +static void *lwt_ip_encap_run_tests(void *arg) +{ + setup_namespaces_nofail("delete"); + + RUN_TEST("lwt_ipv4_encap_egress", AF_INET, ENCAP_EGRESS, false); + RUN_TEST("lwt_ipv6_encap_egress", AF_INET6, ENCAP_EGRESS, false); + RUN_TEST("lwt_ipv4_encap_egress_vrf", AF_INET, ENCAP_EGRESS, true); + RUN_TEST("lwt_ipv6_encap_egress_vrf", AF_INET6, ENCAP_EGRESS, true); + + RUN_TEST("lwt_ipv4_encap_ingress", AF_INET, ENCAP_INGRESS, false); + RUN_TEST("lwt_ipv6_encap_ingress", AF_INET6, ENCAP_INGRESS, false); + RUN_TEST("lwt_ipv4_encap_ingress_vrf", AF_INET, ENCAP_INGRESS, true); + RUN_TEST("lwt_ipv6_encap_ingress_vrf", AF_INET6, ENCAP_INGRESS, true); + + /* bpf_set_tunnel_key() doesn't support setting underlying VRF routing + * so egress_md tests don't run in VRF setup. + */ + RUN_TEST("lwt_ipv4_encap_egress_md", AF_INET, ENCAP_EGRESS_MD, false); + RUN_TEST("lwt_ipv6_encap_egress_md", AF_INET6, ENCAP_EGRESS_MD, false); + return NULL; +} + +void serial_test_lwt_ip_encap(void) +{ + pthread_t test_thread; + int err; + + /* Run the tests in their own thread to isolate the namespace changes + * so they do not affect the environment of other tests. + * (specifically needed because of unshare(CLONE_NEWNS) in open_netns()) + */ + err = pthread_create(&test_thread, NULL, &lwt_ip_encap_run_tests, NULL); + if (ASSERT_OK(err, "pthread_create")) + ASSERT_OK(pthread_join(test_thread, NULL), "pthread_join"); +} diff --git a/tools/testing/selftests/bpf/progs/test_lwt_ip_encap.c b/tools/testing/selftests/bpf/progs/test_lwt_ip_encap.c index d6cb986e7533..39c6bd5402ae 100644 --- a/tools/testing/selftests/bpf/progs/test_lwt_ip_encap.c +++ b/tools/testing/selftests/bpf/progs/test_lwt_ip_encap.c @@ -10,8 +10,11 @@ struct grehdr { __be16 flags; __be16 protocol; + __be32 key; }; +#define GRE_KEY 0x2000 + SEC("encap_gre") int bpf_lwt_encap_gre(struct __sk_buff *skb) { @@ -28,10 +31,10 @@ int bpf_lwt_encap_gre(struct __sk_buff *skb) hdr.iph.ttl = 0x40; hdr.iph.protocol = 47; /* IPPROTO_GRE */ #if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ - hdr.iph.saddr = 0x640110ac; /* 172.16.1.100 */ + hdr.iph.saddr = 0x640510ac; /* 172.16.5.100 */ hdr.iph.daddr = 0x641010ac; /* 172.16.16.100 */ #elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ - hdr.iph.saddr = 0xac100164; /* 172.16.1.100 */ + hdr.iph.saddr = 0xac100564; /* 172.16.5.100 */ hdr.iph.daddr = 0xac101064; /* 172.16.16.100 */ #else #error "Fix your compiler's __BYTE_ORDER__?!" @@ -39,6 +42,7 @@ int bpf_lwt_encap_gre(struct __sk_buff *skb) hdr.iph.tot_len = bpf_htons(skb->len + sizeof(struct encap_hdr)); hdr.greh.protocol = skb->protocol; + hdr.greh.flags = bpf_htons(GRE_KEY); err = bpf_lwt_push_encap(skb, BPF_LWT_ENCAP_IP, &hdr, sizeof(struct encap_hdr)); @@ -63,9 +67,9 @@ int bpf_lwt_encap_gre6(struct __sk_buff *skb) hdr.ip6hdr.payload_len = bpf_htons(skb->len + sizeof(struct grehdr)); hdr.ip6hdr.nexthdr = 47; /* IPPROTO_GRE */ hdr.ip6hdr.hop_limit = 0x40; - /* fb01::1 */ + /* fb05::1 */ hdr.ip6hdr.saddr.s6_addr[0] = 0xfb; - hdr.ip6hdr.saddr.s6_addr[1] = 1; + hdr.ip6hdr.saddr.s6_addr[1] = 5; hdr.ip6hdr.saddr.s6_addr[15] = 1; /* fb10::1 */ hdr.ip6hdr.daddr.s6_addr[0] = 0xfb; @@ -73,6 +77,7 @@ int bpf_lwt_encap_gre6(struct __sk_buff *skb) hdr.ip6hdr.daddr.s6_addr[15] = 1; hdr.greh.protocol = skb->protocol; + hdr.greh.flags = bpf_htons(GRE_KEY); err = bpf_lwt_push_encap(skb, BPF_LWT_ENCAP_IP, &hdr, sizeof(struct encap_hdr)); @@ -82,4 +87,42 @@ int bpf_lwt_encap_gre6(struct __sk_buff *skb) return BPF_LWT_REROUTE; } +SEC("encap_gre_md") +int bpf_lwt_encap_gre_md(struct __sk_buff *skb) +{ + struct bpf_tunnel_key key; + int err; + + __builtin_memset(&key, 0x0, sizeof(key)); + key.remote_ipv4 = 0xac101064; /* 172.16.16.100 - always in host order */ + key.tunnel_ttl = 0x40; + err = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), + BPF_F_ZERO_CSUM_TX | BPF_F_SEQ_NUMBER); + if (err) + return BPF_DROP; + + return BPF_OK; +} + +SEC("encap_gre6_md") +int bpf_lwt_encap_gre6_md(struct __sk_buff *skb) +{ + struct bpf_tunnel_key key; + int err; + + __builtin_memset(&key, 0x0, sizeof(key)); + + /* fb10::1 */ + key.remote_ipv6[0] = bpf_htonl(0xfb100000); + key.remote_ipv6[3] = bpf_htonl(0x01); + key.tunnel_ttl = 0x40; + err = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), + BPF_F_ZERO_CSUM_TX | BPF_F_SEQ_NUMBER | + BPF_F_TUNINFO_IPV6); + if (err) + return BPF_DROP; + + return BPF_OK; +} + char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh deleted file mode 100755 index 6c69c42b1d60..000000000000 --- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh +++ /dev/null @@ -1,475 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -# Setup/topology: -# -# NS1 NS2 NS3 -# veth1 <---> veth2 veth3 <---> veth4 (the top route) -# veth5 <---> veth6 veth7 <---> veth8 (the bottom route) -# -# each vethN gets IPv[4|6]_N address -# -# IPv*_SRC = IPv*_1 -# IPv*_DST = IPv*_4 -# -# all tests test pings from IPv*_SRC to IPv*_DST -# -# by default, routes are configured to allow packets to go -# IP*_1 <=> IP*_2 <=> IP*_3 <=> IP*_4 (the top route) -# -# a GRE device is installed in NS3 with IPv*_GRE, and -# NS1/NS2 are configured to route packets to IPv*_GRE via IP*_8 -# (the bottom route) -# -# Tests: -# -# 1. routes NS2->IPv*_DST are brought down, so the only way a ping -# from IP*_SRC to IP*_DST can work is via IPv*_GRE -# -# 2a. in an egress test, a bpf LWT_XMIT program is installed on veth1 -# that encaps the packets with an IP/GRE header to route to IPv*_GRE -# -# ping: SRC->[encap at veth1:egress]->GRE:decap->DST -# ping replies go DST->SRC directly -# -# 2b. in an ingress test, a bpf LWT_IN program is installed on veth2 -# that encaps the packets with an IP/GRE header to route to IPv*_GRE -# -# ping: SRC->[encap at veth2:ingress]->GRE:decap->DST -# ping replies go DST->SRC directly - -if [[ $EUID -ne 0 ]]; then - echo "This script must be run as root" - echo "FAIL" - exit 1 -fi - -readonly NS1="ns1-$(mktemp -u XXXXXX)" -readonly NS2="ns2-$(mktemp -u XXXXXX)" -readonly NS3="ns3-$(mktemp -u XXXXXX)" - -readonly IPv4_1="172.16.1.100" -readonly IPv4_2="172.16.2.100" -readonly IPv4_3="172.16.3.100" -readonly IPv4_4="172.16.4.100" -readonly IPv4_5="172.16.5.100" -readonly IPv4_6="172.16.6.100" -readonly IPv4_7="172.16.7.100" -readonly IPv4_8="172.16.8.100" -readonly IPv4_GRE="172.16.16.100" - -readonly IPv4_SRC=$IPv4_1 -readonly IPv4_DST=$IPv4_4 - -readonly IPv6_1="fb01::1" -readonly IPv6_2="fb02::1" -readonly IPv6_3="fb03::1" -readonly IPv6_4="fb04::1" -readonly IPv6_5="fb05::1" -readonly IPv6_6="fb06::1" -readonly IPv6_7="fb07::1" -readonly IPv6_8="fb08::1" -readonly IPv6_GRE="fb10::1" - -readonly IPv6_SRC=$IPv6_1 -readonly IPv6_DST=$IPv6_4 - -TEST_STATUS=0 -TESTS_SUCCEEDED=0 -TESTS_FAILED=0 - -TMPFILE="" - -process_test_results() -{ - if [[ "${TEST_STATUS}" -eq 0 ]] ; then - echo "PASS" - TESTS_SUCCEEDED=$((TESTS_SUCCEEDED+1)) - else - echo "FAIL" - TESTS_FAILED=$((TESTS_FAILED+1)) - fi -} - -print_test_summary_and_exit() -{ - echo "passed tests: ${TESTS_SUCCEEDED}" - echo "failed tests: ${TESTS_FAILED}" - if [ "${TESTS_FAILED}" -eq "0" ] ; then - exit 0 - else - exit 1 - fi -} - -setup() -{ - set -e # exit on error - TEST_STATUS=0 - - # create devices and namespaces - ip netns add "${NS1}" - ip netns add "${NS2}" - ip netns add "${NS3}" - - # rp_filter gets confused by what these tests are doing, so disable it - ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS1} sysctl -wq net.ipv4.conf.default.rp_filter=0 - ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0 - ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0 - - # disable IPv6 DAD because it sometimes takes too long and fails tests - ip netns exec ${NS1} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS3} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS1} sysctl -wq net.ipv6.conf.default.accept_dad=0 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.default.accept_dad=0 - ip netns exec ${NS3} sysctl -wq net.ipv6.conf.default.accept_dad=0 - - ip link add veth1 type veth peer name veth2 - ip link add veth3 type veth peer name veth4 - ip link add veth5 type veth peer name veth6 - ip link add veth7 type veth peer name veth8 - - ip netns exec ${NS2} sysctl -wq net.ipv4.ip_forward=1 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.forwarding=1 - - ip link set veth1 netns ${NS1} - ip link set veth2 netns ${NS2} - ip link set veth3 netns ${NS2} - ip link set veth4 netns ${NS3} - ip link set veth5 netns ${NS1} - ip link set veth6 netns ${NS2} - ip link set veth7 netns ${NS2} - ip link set veth8 netns ${NS3} - - if [ ! -z "${VRF}" ] ; then - ip -netns ${NS1} link add red type vrf table 1001 - ip -netns ${NS1} link set red up - ip -netns ${NS1} route add table 1001 unreachable default metric 8192 - ip -netns ${NS1} -6 route add table 1001 unreachable default metric 8192 - ip -netns ${NS1} link set veth1 vrf red - ip -netns ${NS1} link set veth5 vrf red - - ip -netns ${NS2} link add red type vrf table 1001 - ip -netns ${NS2} link set red up - ip -netns ${NS2} route add table 1001 unreachable default metric 8192 - ip -netns ${NS2} -6 route add table 1001 unreachable default metric 8192 - ip -netns ${NS2} link set veth2 vrf red - ip -netns ${NS2} link set veth3 vrf red - ip -netns ${NS2} link set veth6 vrf red - ip -netns ${NS2} link set veth7 vrf red - fi - - # configure addesses: the top route (1-2-3-4) - ip -netns ${NS1} addr add ${IPv4_1}/24 dev veth1 - ip -netns ${NS2} addr add ${IPv4_2}/24 dev veth2 - ip -netns ${NS2} addr add ${IPv4_3}/24 dev veth3 - ip -netns ${NS3} addr add ${IPv4_4}/24 dev veth4 - ip -netns ${NS1} -6 addr add ${IPv6_1}/128 nodad dev veth1 - ip -netns ${NS2} -6 addr add ${IPv6_2}/128 nodad dev veth2 - ip -netns ${NS2} -6 addr add ${IPv6_3}/128 nodad dev veth3 - ip -netns ${NS3} -6 addr add ${IPv6_4}/128 nodad dev veth4 - - # configure addresses: the bottom route (5-6-7-8) - ip -netns ${NS1} addr add ${IPv4_5}/24 dev veth5 - ip -netns ${NS2} addr add ${IPv4_6}/24 dev veth6 - ip -netns ${NS2} addr add ${IPv4_7}/24 dev veth7 - ip -netns ${NS3} addr add ${IPv4_8}/24 dev veth8 - ip -netns ${NS1} -6 addr add ${IPv6_5}/128 nodad dev veth5 - ip -netns ${NS2} -6 addr add ${IPv6_6}/128 nodad dev veth6 - ip -netns ${NS2} -6 addr add ${IPv6_7}/128 nodad dev veth7 - ip -netns ${NS3} -6 addr add ${IPv6_8}/128 nodad dev veth8 - - ip -netns ${NS1} link set dev veth1 up - ip -netns ${NS2} link set dev veth2 up - ip -netns ${NS2} link set dev veth3 up - ip -netns ${NS3} link set dev veth4 up - ip -netns ${NS1} link set dev veth5 up - ip -netns ${NS2} link set dev veth6 up - ip -netns ${NS2} link set dev veth7 up - ip -netns ${NS3} link set dev veth8 up - - # configure routes: IP*_SRC -> veth1/IP*_2 (= top route) default; - # the bottom route to specific bottom addresses - - # NS1 - # top route - ip -netns ${NS1} route add ${IPv4_2}/32 dev veth1 ${VRF} - ip -netns ${NS1} route add default dev veth1 via ${IPv4_2} ${VRF} # go top by default - ip -netns ${NS1} -6 route add ${IPv6_2}/128 dev veth1 ${VRF} - ip -netns ${NS1} -6 route add default dev veth1 via ${IPv6_2} ${VRF} # go top by default - # bottom route - ip -netns ${NS1} route add ${IPv4_6}/32 dev veth5 ${VRF} - ip -netns ${NS1} route add ${IPv4_7}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS1} route add ${IPv4_8}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_6}/128 dev veth5 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_7}/128 dev veth5 via ${IPv6_6} ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_8}/128 dev veth5 via ${IPv6_6} ${VRF} - - # NS2 - # top route - ip -netns ${NS2} route add ${IPv4_1}/32 dev veth2 ${VRF} - ip -netns ${NS2} route add ${IPv4_4}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_1}/128 dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_4}/128 dev veth3 ${VRF} - # bottom route - ip -netns ${NS2} route add ${IPv4_5}/32 dev veth6 ${VRF} - ip -netns ${NS2} route add ${IPv4_8}/32 dev veth7 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_5}/128 dev veth6 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_8}/128 dev veth7 ${VRF} - - # NS3 - # top route - ip -netns ${NS3} route add ${IPv4_3}/32 dev veth4 - ip -netns ${NS3} route add ${IPv4_1}/32 dev veth4 via ${IPv4_3} - ip -netns ${NS3} route add ${IPv4_2}/32 dev veth4 via ${IPv4_3} - ip -netns ${NS3} -6 route add ${IPv6_3}/128 dev veth4 - ip -netns ${NS3} -6 route add ${IPv6_1}/128 dev veth4 via ${IPv6_3} - ip -netns ${NS3} -6 route add ${IPv6_2}/128 dev veth4 via ${IPv6_3} - # bottom route - ip -netns ${NS3} route add ${IPv4_7}/32 dev veth8 - ip -netns ${NS3} route add ${IPv4_5}/32 dev veth8 via ${IPv4_7} - ip -netns ${NS3} route add ${IPv4_6}/32 dev veth8 via ${IPv4_7} - ip -netns ${NS3} -6 route add ${IPv6_7}/128 dev veth8 - ip -netns ${NS3} -6 route add ${IPv6_5}/128 dev veth8 via ${IPv6_7} - ip -netns ${NS3} -6 route add ${IPv6_6}/128 dev veth8 via ${IPv6_7} - - # configure IPv4 GRE device in NS3, and a route to it via the "bottom" route - ip -netns ${NS3} tunnel add gre_dev mode gre remote ${IPv4_1} local ${IPv4_GRE} ttl 255 - ip -netns ${NS3} link set gre_dev up - ip -netns ${NS3} addr add ${IPv4_GRE} dev gre_dev - ip -netns ${NS1} route add ${IPv4_GRE}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS2} route add ${IPv4_GRE}/32 dev veth7 via ${IPv4_8} ${VRF} - - - # configure IPv6 GRE device in NS3, and a route to it via the "bottom" route - ip -netns ${NS3} -6 tunnel add name gre6_dev mode ip6gre remote ${IPv6_1} local ${IPv6_GRE} ttl 255 - ip -netns ${NS3} link set gre6_dev up - ip -netns ${NS3} -6 addr add ${IPv6_GRE} nodad dev gre6_dev - ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8} ${VRF} - - TMPFILE=$(mktemp /tmp/test_lwt_ip_encap.XXXXXX) - - sleep 1 # reduce flakiness - set +e -} - -cleanup() -{ - if [ -f ${TMPFILE} ] ; then - rm ${TMPFILE} - fi - - ip netns del ${NS1} 2> /dev/null - ip netns del ${NS2} 2> /dev/null - ip netns del ${NS3} 2> /dev/null -} - -trap cleanup EXIT - -remove_routes_to_gredev() -{ - ip -netns ${NS1} route del ${IPv4_GRE} dev veth5 ${VRF} - ip -netns ${NS2} route del ${IPv4_GRE} dev veth7 ${VRF} - ip -netns ${NS1} -6 route del ${IPv6_GRE}/128 dev veth5 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_GRE}/128 dev veth7 ${VRF} -} - -add_unreachable_routes_to_gredev() -{ - ip -netns ${NS1} route add unreachable ${IPv4_GRE}/32 ${VRF} - ip -netns ${NS2} route add unreachable ${IPv4_GRE}/32 ${VRF} - ip -netns ${NS1} -6 route add unreachable ${IPv6_GRE}/128 ${VRF} - ip -netns ${NS2} -6 route add unreachable ${IPv6_GRE}/128 ${VRF} -} - -test_ping() -{ - local readonly PROTO=$1 - local readonly EXPECTED=$2 - local RET=0 - - if [ "${PROTO}" == "IPv4" ] ; then - ip netns exec ${NS1} ping -c 1 -W 1 -I veth1 ${IPv4_DST} 2>&1 > /dev/null - RET=$? - elif [ "${PROTO}" == "IPv6" ] ; then - ip netns exec ${NS1} ping6 -c 1 -W 1 -I veth1 ${IPv6_DST} 2>&1 > /dev/null - RET=$? - else - echo " test_ping: unknown PROTO: ${PROTO}" - TEST_STATUS=1 - fi - - if [ "0" != "${RET}" ]; then - RET=1 - fi - - if [ "${EXPECTED}" != "${RET}" ] ; then - echo " test_ping failed: expected: ${EXPECTED}; got ${RET}" - TEST_STATUS=1 - fi -} - -test_gso() -{ - local readonly PROTO=$1 - local readonly PKT_SZ=5000 - local IP_DST="" - : > ${TMPFILE} # trim the capture file - - # check that nc is present - command -v nc >/dev/null 2>&1 || \ - { echo >&2 "nc is not available: skipping TSO tests"; return; } - - # listen on port 9000, capture TCP into $TMPFILE - if [ "${PROTO}" == "IPv4" ] ; then - IP_DST=${IPv4_DST} - ip netns exec ${NS3} bash -c \ - "nc -4 -l -p 9000 > ${TMPFILE} &" - elif [ "${PROTO}" == "IPv6" ] ; then - IP_DST=${IPv6_DST} - ip netns exec ${NS3} bash -c \ - "nc -6 -l -p 9000 > ${TMPFILE} &" - RET=$? - else - echo " test_gso: unknown PROTO: ${PROTO}" - TEST_STATUS=1 - fi - sleep 1 # let nc start listening - - # send a packet larger than MTU - ip netns exec ${NS1} bash -c \ - "dd if=/dev/zero bs=$PKT_SZ count=1 > /dev/tcp/${IP_DST}/9000 2>/dev/null" - sleep 2 # let the packet get delivered - - # verify we received all expected bytes - SZ=$(stat -c %s ${TMPFILE}) - if [ "$SZ" != "$PKT_SZ" ] ; then - echo " test_gso failed: ${PROTO}" - TEST_STATUS=1 - fi -} - -test_egress() -{ - local readonly ENCAP=$1 - echo "starting egress ${ENCAP} encap test ${VRF}" - setup - - # by default, pings work - test_ping IPv4 0 - test_ping IPv6 0 - - # remove NS2->DST routes, ping fails - ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF} - test_ping IPv4 1 - test_ping IPv6 1 - - # install replacement routes (LWT/eBPF), pings succeed - if [ "${ENCAP}" == "IPv4" ] ; then - ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ - test_lwt_ip_encap.o sec encap_gre dev veth1 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ - test_lwt_ip_encap.o sec encap_gre dev veth1 ${VRF} - elif [ "${ENCAP}" == "IPv6" ] ; then - ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ - test_lwt_ip_encap.o sec encap_gre6 dev veth1 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ - test_lwt_ip_encap.o sec encap_gre6 dev veth1 ${VRF} - else - echo " unknown encap ${ENCAP}" - TEST_STATUS=1 - fi - test_ping IPv4 0 - test_ping IPv6 0 - - # skip GSO tests with VRF: VRF routing needs properly assigned - # source IP/device, which is easy to do with ping and hard with dd/nc. - if [ -z "${VRF}" ] ; then - test_gso IPv4 - test_gso IPv6 - fi - - # a negative test: remove routes to GRE devices: ping fails - remove_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - # another negative test - add_unreachable_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - cleanup - process_test_results -} - -test_ingress() -{ - local readonly ENCAP=$1 - echo "starting ingress ${ENCAP} encap test ${VRF}" - setup - - # need to wait a bit for IPv6 to autoconf, otherwise - # ping6 sometimes fails with "unable to bind to address" - - # by default, pings work - test_ping IPv4 0 - test_ping IPv6 0 - - # remove NS2->DST routes, pings fail - ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF} - test_ping IPv4 1 - test_ping IPv6 1 - - # install replacement routes (LWT/eBPF), pings succeed - if [ "${ENCAP}" == "IPv4" ] ; then - ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ - test_lwt_ip_encap.o sec encap_gre dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ - test_lwt_ip_encap.o sec encap_gre dev veth2 ${VRF} - elif [ "${ENCAP}" == "IPv6" ] ; then - ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ - test_lwt_ip_encap.o sec encap_gre6 dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ - test_lwt_ip_encap.o sec encap_gre6 dev veth2 ${VRF} - else - echo "FAIL: unknown encap ${ENCAP}" - TEST_STATUS=1 - fi - test_ping IPv4 0 - test_ping IPv6 0 - - # a negative test: remove routes to GRE devices: ping fails - remove_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - # another negative test - add_unreachable_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - cleanup - process_test_results -} - -VRF="" -test_egress IPv4 -test_egress IPv6 -test_ingress IPv4 -test_ingress IPv6 - -VRF="vrf red" -test_egress IPv4 -test_egress IPv6 -test_ingress IPv4 -test_ingress IPv6 - -print_test_summary_and_exit -- 2.34.1

2 years, 10 months

3
3
0 0

[PATCH AUTOSEL 5.15 16/20] testing: selftests: nft_flowtable.sh: use random netns names

by Sasha Levin

From: Florian Westphal <fw(a)strlen.de> [ Upstream commit b71b7bfeac38c7a21c423ddafb29aa6258949df8 ] "ns1" is a too generic name, use a random suffix to avoid errors when such a netns exists. Also allows to run multiple instances of the script in parallel. Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/netfilter/nft_flowtable.sh | 246 +++++++++--------- 1 file changed, 128 insertions(+), 118 deletions(-) diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh index d4ffebb989f8..c336e6c148d1 100755 --- a/tools/testing/selftests/netfilter/nft_flowtable.sh +++ b/tools/testing/selftests/netfilter/nft_flowtable.sh @@ -14,6 +14,11 @@ # nft_flowtable.sh -o8000 -l1500 -r2000 # +sfx=$(mktemp -u "XXXXXXXX") +ns1="ns1-$sfx" +ns2="ns2-$sfx" +nsr1="nsr1-$sfx" +nsr2="nsr2-$sfx" # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -36,18 +41,17 @@ checktool (){ checktool "nft --version" "run test without nft tool" checktool "ip -Version" "run test without ip tool" checktool "which nc" "run test without nc (netcat)" -checktool "ip netns add nsr1" "create net namespace" +checktool "ip netns add $nsr1" "create net namespace $nsr1" -ip netns add ns1 -ip netns add ns2 - -ip netns add nsr2 +ip netns add $ns1 +ip netns add $ns2 +ip netns add $nsr2 cleanup() { - for i in 1 2; do - ip netns del ns$i - ip netns del nsr$i - done + ip netns del $ns1 + ip netns del $ns2 + ip netns del $nsr1 + ip netns del $nsr2 rm -f "$ns1in" "$ns1out" rm -f "$ns2in" "$ns2out" @@ -59,22 +63,21 @@ trap cleanup EXIT sysctl -q net.netfilter.nf_log_all_netns=1 -ip link add veth0 netns nsr1 type veth peer name eth0 netns ns1 -ip link add veth1 netns nsr1 type veth peer name veth0 netns nsr2 +ip link add veth0 netns $nsr1 type veth peer name eth0 netns $ns1 +ip link add veth1 netns $nsr1 type veth peer name veth0 netns $nsr2 -ip link add veth1 netns nsr2 type veth peer name eth0 netns ns2 +ip link add veth1 netns $nsr2 type veth peer name eth0 netns $ns2 for dev in lo veth0 veth1; do - for i in 1 2; do - ip -net nsr$i link set $dev up - done + ip -net $nsr1 link set $dev up + ip -net $nsr2 link set $dev up done -ip -net nsr1 addr add 10.0.1.1/24 dev veth0 -ip -net nsr1 addr add dead:1::1/64 dev veth0 +ip -net $nsr1 addr add 10.0.1.1/24 dev veth0 +ip -net $nsr1 addr add dead:1::1/64 dev veth0 -ip -net nsr2 addr add 10.0.2.1/24 dev veth1 -ip -net nsr2 addr add dead:2::1/64 dev veth1 +ip -net $nsr2 addr add 10.0.2.1/24 dev veth1 +ip -net $nsr2 addr add dead:2::1/64 dev veth1 # set different MTUs so we need to push packets coming from ns1 (large MTU) # to ns2 (smaller MTU) to stack either to perform fragmentation (ip_no_pmtu_disc=1), @@ -106,49 +109,56 @@ do esac done -if ! ip -net nsr1 link set veth0 mtu $omtu; then +if ! ip -net $nsr1 link set veth0 mtu $omtu; then exit 1 fi -ip -net ns1 link set eth0 mtu $omtu +ip -net $ns1 link set eth0 mtu $omtu -if ! ip -net nsr2 link set veth1 mtu $rmtu; then +if ! ip -net $nsr2 link set veth1 mtu $rmtu; then exit 1 fi -ip -net ns2 link set eth0 mtu $rmtu +ip -net $ns2 link set eth0 mtu $rmtu # transfer-net between nsr1 and nsr2. # these addresses are not used for connections. -ip -net nsr1 addr add 192.168.10.1/24 dev veth1 -ip -net nsr1 addr add fee1:2::1/64 dev veth1 - -ip -net nsr2 addr add 192.168.10.2/24 dev veth0 -ip -net nsr2 addr add fee1:2::2/64 dev veth0 - -for i in 1 2; do - ip netns exec nsr$i sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null - ip netns exec nsr$i sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null - - ip -net ns$i link set lo up - ip -net ns$i link set eth0 up - ip -net ns$i addr add 10.0.$i.99/24 dev eth0 - ip -net ns$i route add default via 10.0.$i.1 - ip -net ns$i addr add dead:$i::99/64 dev eth0 - ip -net ns$i route add default via dead:$i::1 - if ! ip netns exec ns$i sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then +ip -net $nsr1 addr add 192.168.10.1/24 dev veth1 +ip -net $nsr1 addr add fee1:2::1/64 dev veth1 + +ip -net $nsr2 addr add 192.168.10.2/24 dev veth0 +ip -net $nsr2 addr add fee1:2::2/64 dev veth0 + +for i in 0 1; do + ip netns exec $nsr1 sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null + ip netns exec $nsr2 sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null +done + +for ns in $ns1 $ns2;do + ip -net $ns link set lo up + ip -net $ns link set eth0 up + + if ! ip netns exec $ns sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then echo "ERROR: Check Originator/Responder values (problem during address addition)" exit 1 fi - # don't set ip DF bit for first two tests - ip netns exec ns$i sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null + ip netns exec $ns sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null done -ip -net nsr1 route add default via 192.168.10.2 -ip -net nsr2 route add default via 192.168.10.1 +ip -net $ns1 addr add 10.0.1.99/24 dev eth0 +ip -net $ns2 addr add 10.0.2.99/24 dev eth0 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns2 route add default via 10.0.2.1 +ip -net $ns1 addr add dead:1::99/64 dev eth0 +ip -net $ns2 addr add dead:2::99/64 dev eth0 +ip -net $ns1 route add default via dead:1::1 +ip -net $ns2 route add default via dead:2::1 + +ip -net $nsr1 route add default via 192.168.10.2 +ip -net $nsr2 route add default via 192.168.10.1 -ip netns exec nsr1 nft -f - <<EOF +ip netns exec $nsr1 nft -f - <<EOF table inet filter { flowtable f1 { hook ingress priority 0 @@ -197,18 +207,18 @@ if [ $? -ne 0 ]; then fi # test basic connectivity -if ! ip netns exec ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then - echo "ERROR: ns1 cannot reach ns2" 1>&2 +if ! ip netns exec $ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then + echo "ERROR: $ns1 cannot reach ns2" 1>&2 exit 1 fi -if ! ip netns exec ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then - echo "ERROR: ns2 cannot reach ns1" 1>&2 +if ! ip netns exec $ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then + echo "ERROR: $ns2 cannot reach $ns1" 1>&2 exit 1 fi if [ $ret -eq 0 ];then - echo "PASS: netns routing/connectivity: ns1 can reach ns2" + echo "PASS: netns routing/connectivity: $ns1 can reach $ns2" fi ns1in=$(mktemp) @@ -312,24 +322,24 @@ make_file "$ns2in" # First test: # No PMTU discovery, nsr1 is expected to fragment packets from ns1 to ns2 as needed. -if test_tcp_forwarding ns1 ns2; then +if test_tcp_forwarding $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2" else echo "FAIL: flow offload for ns1/ns2:" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi # delete default route, i.e. ns2 won't be able to reach ns1 and # will depend on ns1 being masqueraded in nsr1. # expect ns1 has nsr1 address. -ip -net ns2 route del default via 10.0.2.1 -ip -net ns2 route del default via dead:2::1 -ip -net ns2 route add 192.168.10.1 via 10.0.2.1 +ip -net $ns2 route del default via 10.0.2.1 +ip -net $ns2 route del default via dead:2::1 +ip -net $ns2 route add 192.168.10.1 via 10.0.2.1 # Second test: # Same, but with NAT enabled. -ip netns exec nsr1 nft -f - <<EOF +ip netns exec $nsr1 nft -f - <<EOF table ip nat { chain prerouting { type nat hook prerouting priority 0; policy accept; @@ -343,47 +353,47 @@ table ip nat { } EOF -if test_tcp_forwarding_nat ns1 ns2; then +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with NAT" else echo "FAIL: flow offload for ns1/ns2 with NAT" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi # Third test: # Same as second test, but with PMTU discovery enabled. -handle=$(ip netns exec nsr1 nft -a list table inet filter | grep something-to-grep-for | cut -d \# -f 2) +handle=$(ip netns exec $nsr1 nft -a list table inet filter | grep something-to-grep-for | cut -d \# -f 2) -if ! ip netns exec nsr1 nft delete rule inet filter forward $handle; then +if ! ip netns exec $nsr1 nft delete rule inet filter forward $handle; then echo "FAIL: Could not delete large-packet accept rule" exit 1 fi -ip netns exec ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null -ip netns exec ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null +ip netns exec $ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null +ip netns exec $ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null -if test_tcp_forwarding_nat ns1 ns2; then +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with NAT and pmtu discovery" else echo "FAIL: flow offload for ns1/ns2 with NAT and pmtu discovery" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset fi # Another test: # Add bridge interface br0 to Router1, with NAT enabled. -ip -net nsr1 link add name br0 type bridge -ip -net nsr1 addr flush dev veth0 -ip -net nsr1 link set up dev veth0 -ip -net nsr1 link set veth0 master br0 -ip -net nsr1 addr add 10.0.1.1/24 dev br0 -ip -net nsr1 addr add dead:1::1/64 dev br0 -ip -net nsr1 link set up dev br0 +ip -net $nsr1 link add name br0 type bridge +ip -net $nsr1 addr flush dev veth0 +ip -net $nsr1 link set up dev veth0 +ip -net $nsr1 link set veth0 master br0 +ip -net $nsr1 addr add 10.0.1.1/24 dev br0 +ip -net $nsr1 addr add dead:1::1/64 dev br0 +ip -net $nsr1 link set up dev br0 -ip netns exec nsr1 sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null +ip netns exec $nsr1 sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null # br0 with NAT enabled. -ip netns exec nsr1 nft -f - <<EOF +ip netns exec $nsr1 nft -f - <<EOF flush table ip nat table ip nat { chain prerouting { @@ -398,59 +408,59 @@ table ip nat { } EOF -if test_tcp_forwarding_nat ns1 ns2; then +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with bridge NAT" else echo "FAIL: flow offload for ns1/ns2 with bridge NAT" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi # Another test: # Add bridge interface br0 to Router1, with NAT and VLAN. -ip -net nsr1 link set veth0 nomaster -ip -net nsr1 link set down dev veth0 -ip -net nsr1 link add link veth0 name veth0.10 type vlan id 10 -ip -net nsr1 link set up dev veth0 -ip -net nsr1 link set up dev veth0.10 -ip -net nsr1 link set veth0.10 master br0 - -ip -net ns1 addr flush dev eth0 -ip -net ns1 link add link eth0 name eth0.10 type vlan id 10 -ip -net ns1 link set eth0 up -ip -net ns1 link set eth0.10 up -ip -net ns1 addr add 10.0.1.99/24 dev eth0.10 -ip -net ns1 route add default via 10.0.1.1 -ip -net ns1 addr add dead:1::99/64 dev eth0.10 - -if test_tcp_forwarding_nat ns1 ns2; then +ip -net $nsr1 link set veth0 nomaster +ip -net $nsr1 link set down dev veth0 +ip -net $nsr1 link add link veth0 name veth0.10 type vlan id 10 +ip -net $nsr1 link set up dev veth0 +ip -net $nsr1 link set up dev veth0.10 +ip -net $nsr1 link set veth0.10 master br0 + +ip -net $ns1 addr flush dev eth0 +ip -net $ns1 link add link eth0 name eth0.10 type vlan id 10 +ip -net $ns1 link set eth0 up +ip -net $ns1 link set eth0.10 up +ip -net $ns1 addr add 10.0.1.99/24 dev eth0.10 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns1 addr add dead:1::99/64 dev eth0.10 + +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with bridge NAT and VLAN" else echo "FAIL: flow offload for ns1/ns2 with bridge NAT and VLAN" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi # restore test topology (remove bridge and VLAN) -ip -net nsr1 link set veth0 nomaster -ip -net nsr1 link set veth0 down -ip -net nsr1 link set veth0.10 down -ip -net nsr1 link delete veth0.10 type vlan -ip -net nsr1 link delete br0 type bridge -ip -net ns1 addr flush dev eth0.10 -ip -net ns1 link set eth0.10 down -ip -net ns1 link set eth0 down -ip -net ns1 link delete eth0.10 type vlan +ip -net $nsr1 link set veth0 nomaster +ip -net $nsr1 link set veth0 down +ip -net $nsr1 link set veth0.10 down +ip -net $nsr1 link delete veth0.10 type vlan +ip -net $nsr1 link delete br0 type bridge +ip -net $ns1 addr flush dev eth0.10 +ip -net $ns1 link set eth0.10 down +ip -net $ns1 link set eth0 down +ip -net $ns1 link delete eth0.10 type vlan # restore address in ns1 and nsr1 -ip -net ns1 link set eth0 up -ip -net ns1 addr add 10.0.1.99/24 dev eth0 -ip -net ns1 route add default via 10.0.1.1 -ip -net ns1 addr add dead:1::99/64 dev eth0 -ip -net ns1 route add default via dead:1::1 -ip -net nsr1 addr add 10.0.1.1/24 dev veth0 -ip -net nsr1 addr add dead:1::1/64 dev veth0 -ip -net nsr1 link set up dev veth0 +ip -net $ns1 link set eth0 up +ip -net $ns1 addr add 10.0.1.99/24 dev eth0 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns1 addr add dead:1::99/64 dev eth0 +ip -net $ns1 route add default via dead:1::1 +ip -net $nsr1 addr add 10.0.1.1/24 dev veth0 +ip -net $nsr1 addr add dead:1::1/64 dev veth0 +ip -net $nsr1 link set up dev veth0 KEY_SHA="0x"$(ps -xaf | sha1sum | cut -d " " -f 1) KEY_AES="0x"$(ps -xaf | md5sum | cut -d " " -f 1) @@ -480,23 +490,23 @@ do_esp() { } -do_esp nsr1 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2 +do_esp $nsr1 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2 -do_esp nsr2 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1 +do_esp $nsr2 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1 -ip netns exec nsr1 nft delete table ip nat +ip netns exec $nsr1 nft delete table ip nat # restore default routes -ip -net ns2 route del 192.168.10.1 via 10.0.2.1 -ip -net ns2 route add default via 10.0.2.1 -ip -net ns2 route add default via dead:2::1 +ip -net $ns2 route del 192.168.10.1 via 10.0.2.1 +ip -net $ns2 route add default via 10.0.2.1 +ip -net $ns2 route add default via dead:2::1 -if test_tcp_forwarding ns1 ns2; then +if test_tcp_forwarding $ns1 $ns2; then echo "PASS: ipsec tunnel mode for ns1/ns2" else echo "FAIL: ipsec tunnel mode for ns1/ns2" - ip netns exec nsr1 nft list ruleset 1>&2 - ip netns exec nsr1 cat /proc/net/xfrm_stat 1>&2 + ip netns exec $nsr1 nft list ruleset 1>&2 + ip netns exec $nsr1 cat /proc/net/xfrm_stat 1>&2 fi exit $ret -- 2.35.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 5.19 32/38] testing: selftests: nft_flowtable.sh: use random netns names

by Sasha Levin

From: Florian Westphal <fw(a)strlen.de> [ Upstream commit b71b7bfeac38c7a21c423ddafb29aa6258949df8 ] "ns1" is a too generic name, use a random suffix to avoid errors when such a netns exists. Also allows to run multiple instances of the script in parallel. Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/netfilter/nft_flowtable.sh | 246 +++++++++--------- 1 file changed, 128 insertions(+), 118 deletions(-) diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh index d4ffebb989f8..c336e6c148d1 100755 --- a/tools/testing/selftests/netfilter/nft_flowtable.sh +++ b/tools/testing/selftests/netfilter/nft_flowtable.sh @@ -14,6 +14,11 @@ # nft_flowtable.sh -o8000 -l1500 -r2000 # +sfx=$(mktemp -u "XXXXXXXX") +ns1="ns1-$sfx" +ns2="ns2-$sfx" +nsr1="nsr1-$sfx" +nsr2="nsr2-$sfx" # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -36,18 +41,17 @@ checktool (){ checktool "nft --version" "run test without nft tool" checktool "ip -Version" "run test without ip tool" checktool "which nc" "run test without nc (netcat)" -checktool "ip netns add nsr1" "create net namespace" +checktool "ip netns add $nsr1" "create net namespace $nsr1" -ip netns add ns1 -ip netns add ns2 - -ip netns add nsr2 +ip netns add $ns1 +ip netns add $ns2 +ip netns add $nsr2 cleanup() { - for i in 1 2; do - ip netns del ns$i - ip netns del nsr$i - done + ip netns del $ns1 + ip netns del $ns2 + ip netns del $nsr1 + ip netns del $nsr2 rm -f "$ns1in" "$ns1out" rm -f "$ns2in" "$ns2out" @@ -59,22 +63,21 @@ trap cleanup EXIT sysctl -q net.netfilter.nf_log_all_netns=1 -ip link add veth0 netns nsr1 type veth peer name eth0 netns ns1 -ip link add veth1 netns nsr1 type veth peer name veth0 netns nsr2 +ip link add veth0 netns $nsr1 type veth peer name eth0 netns $ns1 +ip link add veth1 netns $nsr1 type veth peer name veth0 netns $nsr2 -ip link add veth1 netns nsr2 type veth peer name eth0 netns ns2 +ip link add veth1 netns $nsr2 type veth peer name eth0 netns $ns2 for dev in lo veth0 veth1; do - for i in 1 2; do - ip -net nsr$i link set $dev up - done + ip -net $nsr1 link set $dev up + ip -net $nsr2 link set $dev up done -ip -net nsr1 addr add 10.0.1.1/24 dev veth0 -ip -net nsr1 addr add dead:1::1/64 dev veth0 +ip -net $nsr1 addr add 10.0.1.1/24 dev veth0 +ip -net $nsr1 addr add dead:1::1/64 dev veth0 -ip -net nsr2 addr add 10.0.2.1/24 dev veth1 -ip -net nsr2 addr add dead:2::1/64 dev veth1 +ip -net $nsr2 addr add 10.0.2.1/24 dev veth1 +ip -net $nsr2 addr add dead:2::1/64 dev veth1 # set different MTUs so we need to push packets coming from ns1 (large MTU) # to ns2 (smaller MTU) to stack either to perform fragmentation (ip_no_pmtu_disc=1), @@ -106,49 +109,56 @@ do esac done -if ! ip -net nsr1 link set veth0 mtu $omtu; then +if ! ip -net $nsr1 link set veth0 mtu $omtu; then exit 1 fi -ip -net ns1 link set eth0 mtu $omtu +ip -net $ns1 link set eth0 mtu $omtu -if ! ip -net nsr2 link set veth1 mtu $rmtu; then +if ! ip -net $nsr2 link set veth1 mtu $rmtu; then exit 1 fi -ip -net ns2 link set eth0 mtu $rmtu +ip -net $ns2 link set eth0 mtu $rmtu # transfer-net between nsr1 and nsr2. # these addresses are not used for connections. -ip -net nsr1 addr add 192.168.10.1/24 dev veth1 -ip -net nsr1 addr add fee1:2::1/64 dev veth1 - -ip -net nsr2 addr add 192.168.10.2/24 dev veth0 -ip -net nsr2 addr add fee1:2::2/64 dev veth0 - -for i in 1 2; do - ip netns exec nsr$i sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null - ip netns exec nsr$i sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null - - ip -net ns$i link set lo up - ip -net ns$i link set eth0 up - ip -net ns$i addr add 10.0.$i.99/24 dev eth0 - ip -net ns$i route add default via 10.0.$i.1 - ip -net ns$i addr add dead:$i::99/64 dev eth0 - ip -net ns$i route add default via dead:$i::1 - if ! ip netns exec ns$i sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then +ip -net $nsr1 addr add 192.168.10.1/24 dev veth1 +ip -net $nsr1 addr add fee1:2::1/64 dev veth1 + +ip -net $nsr2 addr add 192.168.10.2/24 dev veth0 +ip -net $nsr2 addr add fee1:2::2/64 dev veth0 + +for i in 0 1; do + ip netns exec $nsr1 sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null + ip netns exec $nsr2 sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null +done + +for ns in $ns1 $ns2;do + ip -net $ns link set lo up + ip -net $ns link set eth0 up + + if ! ip netns exec $ns sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then echo "ERROR: Check Originator/Responder values (problem during address addition)" exit 1 fi - # don't set ip DF bit for first two tests - ip netns exec ns$i sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null + ip netns exec $ns sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null done -ip -net nsr1 route add default via 192.168.10.2 -ip -net nsr2 route add default via 192.168.10.1 +ip -net $ns1 addr add 10.0.1.99/24 dev eth0 +ip -net $ns2 addr add 10.0.2.99/24 dev eth0 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns2 route add default via 10.0.2.1 +ip -net $ns1 addr add dead:1::99/64 dev eth0 +ip -net $ns2 addr add dead:2::99/64 dev eth0 +ip -net $ns1 route add default via dead:1::1 +ip -net $ns2 route add default via dead:2::1 + +ip -net $nsr1 route add default via 192.168.10.2 +ip -net $nsr2 route add default via 192.168.10.1 -ip netns exec nsr1 nft -f - <<EOF +ip netns exec $nsr1 nft -f - <<EOF table inet filter { flowtable f1 { hook ingress priority 0 @@ -197,18 +207,18 @@ if [ $? -ne 0 ]; then fi # test basic connectivity -if ! ip netns exec ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then - echo "ERROR: ns1 cannot reach ns2" 1>&2 +if ! ip netns exec $ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then + echo "ERROR: $ns1 cannot reach ns2" 1>&2 exit 1 fi -if ! ip netns exec ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then - echo "ERROR: ns2 cannot reach ns1" 1>&2 +if ! ip netns exec $ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then + echo "ERROR: $ns2 cannot reach $ns1" 1>&2 exit 1 fi if [ $ret -eq 0 ];then - echo "PASS: netns routing/connectivity: ns1 can reach ns2" + echo "PASS: netns routing/connectivity: $ns1 can reach $ns2" fi ns1in=$(mktemp) @@ -312,24 +322,24 @@ make_file "$ns2in" # First test: # No PMTU discovery, nsr1 is expected to fragment packets from ns1 to ns2 as needed. -if test_tcp_forwarding ns1 ns2; then +if test_tcp_forwarding $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2" else echo "FAIL: flow offload for ns1/ns2:" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi # delete default route, i.e. ns2 won't be able to reach ns1 and # will depend on ns1 being masqueraded in nsr1. # expect ns1 has nsr1 address. -ip -net ns2 route del default via 10.0.2.1 -ip -net ns2 route del default via dead:2::1 -ip -net ns2 route add 192.168.10.1 via 10.0.2.1 +ip -net $ns2 route del default via 10.0.2.1 +ip -net $ns2 route del default via dead:2::1 +ip -net $ns2 route add 192.168.10.1 via 10.0.2.1 # Second test: # Same, but with NAT enabled. -ip netns exec nsr1 nft -f - <<EOF +ip netns exec $nsr1 nft -f - <<EOF table ip nat { chain prerouting { type nat hook prerouting priority 0; policy accept; @@ -343,47 +353,47 @@ table ip nat { } EOF -if test_tcp_forwarding_nat ns1 ns2; then +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with NAT" else echo "FAIL: flow offload for ns1/ns2 with NAT" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi # Third test: # Same as second test, but with PMTU discovery enabled. -handle=$(ip netns exec nsr1 nft -a list table inet filter | grep something-to-grep-for | cut -d \# -f 2) +handle=$(ip netns exec $nsr1 nft -a list table inet filter | grep something-to-grep-for | cut -d \# -f 2) -if ! ip netns exec nsr1 nft delete rule inet filter forward $handle; then +if ! ip netns exec $nsr1 nft delete rule inet filter forward $handle; then echo "FAIL: Could not delete large-packet accept rule" exit 1 fi -ip netns exec ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null -ip netns exec ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null +ip netns exec $ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null +ip netns exec $ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null -if test_tcp_forwarding_nat ns1 ns2; then +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with NAT and pmtu discovery" else echo "FAIL: flow offload for ns1/ns2 with NAT and pmtu discovery" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset fi # Another test: # Add bridge interface br0 to Router1, with NAT enabled. -ip -net nsr1 link add name br0 type bridge -ip -net nsr1 addr flush dev veth0 -ip -net nsr1 link set up dev veth0 -ip -net nsr1 link set veth0 master br0 -ip -net nsr1 addr add 10.0.1.1/24 dev br0 -ip -net nsr1 addr add dead:1::1/64 dev br0 -ip -net nsr1 link set up dev br0 +ip -net $nsr1 link add name br0 type bridge +ip -net $nsr1 addr flush dev veth0 +ip -net $nsr1 link set up dev veth0 +ip -net $nsr1 link set veth0 master br0 +ip -net $nsr1 addr add 10.0.1.1/24 dev br0 +ip -net $nsr1 addr add dead:1::1/64 dev br0 +ip -net $nsr1 link set up dev br0 -ip netns exec nsr1 sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null +ip netns exec $nsr1 sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null # br0 with NAT enabled. -ip netns exec nsr1 nft -f - <<EOF +ip netns exec $nsr1 nft -f - <<EOF flush table ip nat table ip nat { chain prerouting { @@ -398,59 +408,59 @@ table ip nat { } EOF -if test_tcp_forwarding_nat ns1 ns2; then +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with bridge NAT" else echo "FAIL: flow offload for ns1/ns2 with bridge NAT" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi # Another test: # Add bridge interface br0 to Router1, with NAT and VLAN. -ip -net nsr1 link set veth0 nomaster -ip -net nsr1 link set down dev veth0 -ip -net nsr1 link add link veth0 name veth0.10 type vlan id 10 -ip -net nsr1 link set up dev veth0 -ip -net nsr1 link set up dev veth0.10 -ip -net nsr1 link set veth0.10 master br0 - -ip -net ns1 addr flush dev eth0 -ip -net ns1 link add link eth0 name eth0.10 type vlan id 10 -ip -net ns1 link set eth0 up -ip -net ns1 link set eth0.10 up -ip -net ns1 addr add 10.0.1.99/24 dev eth0.10 -ip -net ns1 route add default via 10.0.1.1 -ip -net ns1 addr add dead:1::99/64 dev eth0.10 - -if test_tcp_forwarding_nat ns1 ns2; then +ip -net $nsr1 link set veth0 nomaster +ip -net $nsr1 link set down dev veth0 +ip -net $nsr1 link add link veth0 name veth0.10 type vlan id 10 +ip -net $nsr1 link set up dev veth0 +ip -net $nsr1 link set up dev veth0.10 +ip -net $nsr1 link set veth0.10 master br0 + +ip -net $ns1 addr flush dev eth0 +ip -net $ns1 link add link eth0 name eth0.10 type vlan id 10 +ip -net $ns1 link set eth0 up +ip -net $ns1 link set eth0.10 up +ip -net $ns1 addr add 10.0.1.99/24 dev eth0.10 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns1 addr add dead:1::99/64 dev eth0.10 + +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with bridge NAT and VLAN" else echo "FAIL: flow offload for ns1/ns2 with bridge NAT and VLAN" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi # restore test topology (remove bridge and VLAN) -ip -net nsr1 link set veth0 nomaster -ip -net nsr1 link set veth0 down -ip -net nsr1 link set veth0.10 down -ip -net nsr1 link delete veth0.10 type vlan -ip -net nsr1 link delete br0 type bridge -ip -net ns1 addr flush dev eth0.10 -ip -net ns1 link set eth0.10 down -ip -net ns1 link set eth0 down -ip -net ns1 link delete eth0.10 type vlan +ip -net $nsr1 link set veth0 nomaster +ip -net $nsr1 link set veth0 down +ip -net $nsr1 link set veth0.10 down +ip -net $nsr1 link delete veth0.10 type vlan +ip -net $nsr1 link delete br0 type bridge +ip -net $ns1 addr flush dev eth0.10 +ip -net $ns1 link set eth0.10 down +ip -net $ns1 link set eth0 down +ip -net $ns1 link delete eth0.10 type vlan # restore address in ns1 and nsr1 -ip -net ns1 link set eth0 up -ip -net ns1 addr add 10.0.1.99/24 dev eth0 -ip -net ns1 route add default via 10.0.1.1 -ip -net ns1 addr add dead:1::99/64 dev eth0 -ip -net ns1 route add default via dead:1::1 -ip -net nsr1 addr add 10.0.1.1/24 dev veth0 -ip -net nsr1 addr add dead:1::1/64 dev veth0 -ip -net nsr1 link set up dev veth0 +ip -net $ns1 link set eth0 up +ip -net $ns1 addr add 10.0.1.99/24 dev eth0 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns1 addr add dead:1::99/64 dev eth0 +ip -net $ns1 route add default via dead:1::1 +ip -net $nsr1 addr add 10.0.1.1/24 dev veth0 +ip -net $nsr1 addr add dead:1::1/64 dev veth0 +ip -net $nsr1 link set up dev veth0 KEY_SHA="0x"$(ps -xaf | sha1sum | cut -d " " -f 1) KEY_AES="0x"$(ps -xaf | md5sum | cut -d " " -f 1) @@ -480,23 +490,23 @@ do_esp() { } -do_esp nsr1 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2 +do_esp $nsr1 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2 -do_esp nsr2 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1 +do_esp $nsr2 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1 -ip netns exec nsr1 nft delete table ip nat +ip netns exec $nsr1 nft delete table ip nat # restore default routes -ip -net ns2 route del 192.168.10.1 via 10.0.2.1 -ip -net ns2 route add default via 10.0.2.1 -ip -net ns2 route add default via dead:2::1 +ip -net $ns2 route del 192.168.10.1 via 10.0.2.1 +ip -net $ns2 route add default via 10.0.2.1 +ip -net $ns2 route add default via dead:2::1 -if test_tcp_forwarding ns1 ns2; then +if test_tcp_forwarding $ns1 $ns2; then echo "PASS: ipsec tunnel mode for ns1/ns2" else echo "FAIL: ipsec tunnel mode for ns1/ns2" - ip netns exec nsr1 nft list ruleset 1>&2 - ip netns exec nsr1 cat /proc/net/xfrm_stat 1>&2 + ip netns exec $nsr1 nft list ruleset 1>&2 + ip netns exec $nsr1 cat /proc/net/xfrm_stat 1>&2 fi exit $ret -- 2.35.1

2 years, 10 months

1
0
0 0

[PATCH 2/2] selftests/sgx: Add SGX selftest augment_via_eaccept_long

by Jarkko Sakkinen

From: Vijay Dhanraj <vijay.dhanraj(a)intel.com> Add a new test case which is same as augment_via_eaccept but adds a larger number of EPC pages to stress test EAUG via EACCEPT. Signed-off-by: Vijay Dhanraj <vijay.dhanraj(a)intel.com> Reviewed-by: Jarkko Sakkinen <jarkko(a)kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko(a)kernel.org> --- I removed Githubisms (hyphens), added missing subsystem tag, and cleaned up the commit message a bit. tools/testing/selftests/sgx/load.c | 5 +- tools/testing/selftests/sgx/main.c | 120 +++++++++++++++++++++++- tools/testing/selftests/sgx/main.h | 3 +- tools/testing/selftests/sgx/sigstruct.c | 2 +- 4 files changed, 125 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/sgx/load.c b/tools/testing/selftests/sgx/load.c index 94bdeac1cf04..7de1b15c90b1 100644 --- a/tools/testing/selftests/sgx/load.c +++ b/tools/testing/selftests/sgx/load.c @@ -171,7 +171,8 @@ uint64_t encl_get_entry(struct encl *encl, const char *symbol) return 0; } -bool encl_load(const char *path, struct encl *encl, unsigned long heap_size) +bool encl_load(const char *path, struct encl *encl, unsigned long heap_size, + unsigned long edmm_size) { const char device_path[] = "/dev/sgx_enclave"; struct encl_segment *seg; @@ -300,7 +301,7 @@ bool encl_load(const char *path, struct encl *encl, unsigned long heap_size) encl->src_size = encl->segment_tbl[j].offset + encl->segment_tbl[j].size; - for (encl->encl_size = 4096; encl->encl_size < encl->src_size; ) + for (encl->encl_size = 4096; encl->encl_size < encl->src_size + edmm_size;) encl->encl_size <<= 1; return true; diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c index 9820b3809c69..65e79682f75e 100644 --- a/tools/testing/selftests/sgx/main.c +++ b/tools/testing/selftests/sgx/main.c @@ -25,6 +25,8 @@ static const uint64_t MAGIC = 0x1122334455667788ULL; static const uint64_t MAGIC2 = 0x8877665544332211ULL; vdso_sgx_enter_enclave_t vdso_sgx_enter_enclave; +static const unsigned long edmm_size = 8589934592; //8G + /* * Security Information (SECINFO) data structure needed by a few SGX * instructions (eg. ENCLU[EACCEPT] and ENCLU[EMODPE]) holds meta-data @@ -183,7 +185,7 @@ static bool setup_test_encl(unsigned long heap_size, struct encl *encl, unsigned int i; void *addr; - if (!encl_load("test_encl.elf", encl, heap_size)) { + if (!encl_load("test_encl.elf", encl, heap_size, edmm_size)) { encl_delete(encl); TH_LOG("Failed to load the test enclave."); return false; @@ -1210,6 +1212,122 @@ TEST_F(enclave, augment_via_eaccept) munmap(addr, PAGE_SIZE); } +/* + * Test for the addition of large number of pages to an initialized enclave via + * a pre-emptive run of EACCEPT on page to be added. + */ +#define TIMEOUT_LONG 900 /* seconds */ +TEST_F_TIMEOUT(enclave, augment_via_eaccept_long, TIMEOUT_LONG) +{ + struct encl_op_get_from_addr get_addr_op; + struct encl_op_put_to_addr put_addr_op; + struct encl_op_eaccept eaccept_op; + size_t total_size = 0; + void *addr; + unsigned long i; + + if (!sgx2_supported()) + SKIP(return, "SGX2 not supported"); + + ASSERT_TRUE(setup_test_encl(ENCL_HEAP_SIZE_DEFAULT, &self->encl, _metadata)); + + memset(&self->run, 0, sizeof(self->run)); + self->run.tcs = self->encl.encl_base; + + for (i = 0; i < self->encl.nr_segments; i++) { + struct encl_segment *seg = &self->encl.segment_tbl[i]; + + total_size += seg->size; + TH_LOG("test enclave: total_size = %ld, seg->size = %ld", total_size, seg->size); + } + + /* + * Actual enclave size is expected to be larger than the loaded + * test enclave since enclave size must be a power of 2 in bytes while + * test_encl does not consume it all. + */ + EXPECT_LT(total_size + edmm_size, self->encl.encl_size); + + /* + * mmap() a page at end of existing enclave to be used for dynamic + * EPC page. + * + * Kernel will allow new mapping using any permissions if it + * falls into the enclave's address range but not backed + * by existing enclave pages. + */ + TH_LOG("mmaping pages at end of enclave..."); + addr = mmap((void *)self->encl.encl_base + total_size, edmm_size, + PROT_READ | PROT_WRITE | PROT_EXEC, MAP_SHARED | MAP_FIXED, + self->encl.fd, 0); + EXPECT_NE(addr, MAP_FAILED); + + self->run.exception_vector = 0; + self->run.exception_error_code = 0; + self->run.exception_addr = 0; + + /* + * Run EACCEPT on new page to trigger the #PF->EAUG->EACCEPT(again + * without a #PF). All should be transparent to userspace. + */ + TH_LOG("Entering enclave to run EACCEPT for each page of %zd bytes may take a while ...", + edmm_size); + eaccept_op.flags = SGX_SECINFO_R | SGX_SECINFO_W | SGX_SECINFO_REG | SGX_SECINFO_PENDING; + eaccept_op.ret = 0; + eaccept_op.header.type = ENCL_OP_EACCEPT; + + for (i = 0; i < edmm_size; i += 4096) { + eaccept_op.epc_addr = (uint64_t)(addr + i); + + EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0); + if (self->run.exception_vector == 14 && + self->run.exception_error_code == 4 && + self->run.exception_addr == self->encl.encl_base) { + munmap(addr, edmm_size); + SKIP(return, "Kernel does not support adding pages to initialized enclave"); + } + + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + ASSERT_EQ(eaccept_op.ret, 0); + ASSERT_EQ(self->run.function, EEXIT); + } + + /* + * New page should be accessible from within enclave - attempt to + * write to it. + */ + put_addr_op.value = MAGIC; + put_addr_op.addr = (unsigned long)addr; + put_addr_op.header.type = ENCL_OP_PUT_TO_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0); + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + /* + * Read memory from newly added page that was just written to, + * confirming that data previously written (MAGIC) is present. + */ + get_addr_op.value = 0; + get_addr_op.addr = (unsigned long)addr; + get_addr_op.header.type = ENCL_OP_GET_FROM_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0); + + EXPECT_EQ(get_addr_op.value, MAGIC); + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + munmap(addr, edmm_size); +} + /* * SGX2 page type modification test in two phases: * Phase 1: diff --git a/tools/testing/selftests/sgx/main.h b/tools/testing/selftests/sgx/main.h index fc585be97e2f..fe5d39ac0e1e 100644 --- a/tools/testing/selftests/sgx/main.h +++ b/tools/testing/selftests/sgx/main.h @@ -35,7 +35,8 @@ extern unsigned char sign_key[]; extern unsigned char sign_key_end[]; void encl_delete(struct encl *ctx); -bool encl_load(const char *path, struct encl *encl, unsigned long heap_size); +bool encl_load(const char *path, struct encl *encl, unsigned long heap_size, + unsigned long edmm_size); bool encl_measure(struct encl *encl); bool encl_build(struct encl *encl); uint64_t encl_get_entry(struct encl *encl, const char *symbol); diff --git a/tools/testing/selftests/sgx/sigstruct.c b/tools/testing/selftests/sgx/sigstruct.c index 50c5ab1aa6fa..6000cf0e4975 100644 --- a/tools/testing/selftests/sgx/sigstruct.c +++ b/tools/testing/selftests/sgx/sigstruct.c @@ -343,7 +343,7 @@ bool encl_measure(struct encl *encl) if (!ctx) goto err; - if (!mrenclave_ecreate(ctx, encl->src_size)) + if (!mrenclave_ecreate(ctx, encl->encl_size)) goto err; for (i = 0; i < encl->nr_segments; i++) { -- 2.37.1

2 years, 10 months

3
13
0 0

[PATCH v1 0/2] kselftest/arm64: Small improvements to ZA signal handling coverag

by Mark Brown

These patches improve the coverage of ZA signal contexts a bit, adding some validation that the actual data is correct and covering the case where ZA is not enabled. Mark Brown (2): kselftest/arm64: Tighten up validation of ZA signal context kselftest/arm64: Add a test for signal frames with ZA disabled .../arm64/signal/testcases/za_no_regs.c | 119 ++++++++++++++++++ .../arm64/signal/testcases/za_regs.c | 16 ++- 2 files changed, 134 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/arm64/signal/testcases/za_no_regs.c base-commit: 568035b01cfb107af8d2e4bd2fb9aea22cf5b868 -- 2.30.2

2 years, 10 months

1
2
0 0

[PATCH -next] selftests/bpf: fix wrong size passed to bpf_setsockopt()

by Yang Yingliang

sizeof(new_cc) is not real memory size that new_cc point to, introduce new_cc_len to store size then pass it to bpf_setsockopt(). Fixes: 31123c0360e0 ("selftests/bpf: bpf_setsockopt tests") Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- tools/testing/selftests/bpf/progs/setget_sockopt.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/setget_sockopt.c b/tools/testing/selftests/bpf/progs/setget_sockopt.c index 4a4cb44a4a15..40606ef47a38 100644 --- a/tools/testing/selftests/bpf/progs/setget_sockopt.c +++ b/tools/testing/selftests/bpf/progs/setget_sockopt.c @@ -305,15 +305,19 @@ static int bpf_test_tcp_sockopt(__u32 i, struct loop_ctx *lc) if (t->opt == TCP_CONGESTION) { char old_cc[16], tmp_cc[16]; const char *new_cc; + int new_cc_len; if (bpf_getsockopt(ctx, IPPROTO_TCP, TCP_CONGESTION, old_cc, sizeof(old_cc))) return 1; - if (!bpf_strncmp(old_cc, sizeof(old_cc), cubic_cc)) + if (!bpf_strncmp(old_cc, sizeof(old_cc), cubic_cc)) { new_cc = reno_cc; - else + new_cc_len = sizeof(reno_cc); + } else { new_cc = cubic_cc; + new_cc_len = sizeof(cubic_cc); + } if (bpf_setsockopt(ctx, IPPROTO_TCP, TCP_CONGESTION, (void *)new_cc, - sizeof(new_cc))) + new_cc_len)) return 1; if (bpf_getsockopt(ctx, IPPROTO_TCP, TCP_CONGESTION, tmp_cc, sizeof(tmp_cc))) return 1; -- 2.25.1

2 years, 10 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror