- Linux-kselftest-mirror - lists.linaro.org

[RFC PATCH v2.1 19/30] selftests/sgx: Test two different SGX2 EAUG flows

by Jarkko Sakkinen

From: Reinette Chatre <reinette.chatre(a)intel.com> Enclave pages can be added to an initialized enclave when an address belonging to the enclave but without a backing page is accessed from within the enclave. Accessing memory without a backing enclave page from within an enclave can be in different ways: 1) Pre-emptively run ENCLU[EACCEPT]. Since the addition of a page always needs to be accepted by the enclave via ENCLU[EACCEPT] this flow is efficient since the first execution of ENCLU[EACCEPT] triggers the addition of the page and when execution returns to the same instruction the second execution would be successful as an acceptance of the page. 2) A direct read or write. The flow where a direct read or write triggers the page addition execution cannot resume from the instruction (read/write) that triggered the fault but instead the enclave needs to be entered at a different entry point to run needed ENCLU[EACCEPT] before execution can return to the original entry point and the read/write instruction that faulted. Add tests for both flows. Signed-off-by: Reinette Chatre <reinette.chatre(a)intel.com> --- tools/testing/selftests/sgx/main.c | 243 +++++++++++++++++++++++++++++ 1 file changed, 243 insertions(+) diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c index ea5f2e064687..13542c5de66f 100644 --- a/tools/testing/selftests/sgx/main.c +++ b/tools/testing/selftests/sgx/main.c @@ -86,6 +86,15 @@ static bool vdso_get_symtab(void *addr, struct vdso_symtab *symtab) return true; } +static inline int sgx2_supported(void) +{ + unsigned int eax, ebx, ecx, edx; + + __cpuid_count(SGX_CPUID, 0x0, eax, ebx, ecx, edx); + + return eax & 0x2; +} + static unsigned long elf_sym_hash(const char *name) { unsigned long h = 0, high; @@ -863,4 +872,238 @@ TEST_F(enclave, epcm_permissions) EXPECT_EQ(self->run.exception_addr, 0); } +/* + * Test the addition of pages to an initialized enclave via writing to + * a page belonging to the enclave's address space but was not added + * during enclave creation. + */ +TEST_F(enclave, augment) +{ + struct encl_op_get_from_addr get_addr_op; + struct encl_op_put_to_addr put_addr_op; + struct encl_op_eaccept eaccept_op; + size_t total_size = 0; + void *addr; + int i; + + if (!sgx2_supported()) + SKIP(return, "SGX2 not supported"); + + ASSERT_TRUE(setup_test_encl(ENCL_HEAP_SIZE_DEFAULT, &self->encl, _metadata)); + + memset(&self->run, 0, sizeof(self->run)); + self->run.tcs = self->encl.encl_base; + + for (i = 0; i < self->encl.nr_segments; i++) { + struct encl_segment *seg = &self->encl.segment_tbl[i]; + + total_size += seg->size; + } + + /* + * Actual enclave size is expected to be larger than the loaded + * test enclave since enclave size must be a power of 2 in bytes + * and test_encl does not consume it all. + */ + EXPECT_LT(total_size + PAGE_SIZE, self->encl.encl_size); + + /* + * Create memory mapping for the page that will be added. New + * memory mapping is for one page right after all existing + * mappings. + */ + addr = mmap((void *)self->encl.encl_base + total_size, PAGE_SIZE, + PROT_READ | PROT_WRITE | PROT_EXEC, + MAP_SHARED | MAP_FIXED, self->encl.fd, 0); + EXPECT_NE(addr, MAP_FAILED); + + self->run.exception_vector = 0; + self->run.exception_error_code = 0; + self->run.exception_addr = 0; + + /* + * Attempt to write to the new page from within enclave. + * Expected to fail since page is not (yet) part of the enclave. + * The first #PF will trigger the addition of the page to the + * enclave, but since the new page needs an EACCEPT from within the + * enclave before it can be used it would not be possible + * to successfully return to the failing instruction. This is the + * cause of the second #PF captured here having the SGX bit set, + * it is from hardware preventing the page from being used. + */ + put_addr_op.value = MAGIC; + put_addr_op.addr = (unsigned long)addr; + put_addr_op.header.type = ENCL_OP_PUT_TO_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0); + + EXPECT_EQ(self->run.function, ERESUME); + EXPECT_EQ(self->run.exception_vector, 14); + EXPECT_EQ(self->run.exception_addr, (unsigned long)addr); + + if (self->run.exception_error_code == 0x6) { + munmap(addr, PAGE_SIZE); + SKIP(return, "Kernel does not support adding pages to initialized enclave"); + } + + EXPECT_EQ(self->run.exception_error_code, 0x8007); + + self->run.exception_vector = 0; + self->run.exception_error_code = 0; + self->run.exception_addr = 0; + + /* Handle AEX by running EACCEPT from new entry point. */ + self->run.tcs = self->encl.encl_base + PAGE_SIZE; + + eaccept_op.epc_addr = self->encl.encl_base + total_size; + eaccept_op.flags = SGX_SECINFO_R | SGX_SECINFO_W | SGX_SECINFO_REG | SGX_SECINFO_PENDING; + eaccept_op.ret = 0; + eaccept_op.header.type = ENCL_OP_EACCEPT; + + EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0); + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + EXPECT_EQ(eaccept_op.ret, 0); + + /* Can now return to main TCS to resume execution. */ + self->run.tcs = self->encl.encl_base; + + EXPECT_EQ(vdso_sgx_enter_enclave((unsigned long)&put_addr_op, 0, 0, + ERESUME, 0, 0, + &self->run), + 0); + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + /* + * Read memory from newly added page that was just written to, + * confirming that data previously written (MAGIC) is present. + */ + get_addr_op.value = 0; + get_addr_op.addr = (unsigned long)addr; + get_addr_op.header.type = ENCL_OP_GET_FROM_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0); + + EXPECT_EQ(get_addr_op.value, MAGIC); + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + munmap(addr, PAGE_SIZE); +} + +/* + * Test for the addition of pages to an initialized enclave via a + * pre-emptive run of EACCEPT on page to be added. + */ +TEST_F(enclave, augment_via_eaccept) +{ + struct encl_op_get_from_addr get_addr_op; + struct encl_op_put_to_addr put_addr_op; + struct encl_op_eaccept eaccept_op; + size_t total_size = 0; + void *addr; + int i; + + if (!sgx2_supported()) + SKIP(return, "SGX2 not supported"); + + ASSERT_TRUE(setup_test_encl(ENCL_HEAP_SIZE_DEFAULT, &self->encl, _metadata)); + + memset(&self->run, 0, sizeof(self->run)); + self->run.tcs = self->encl.encl_base; + + for (i = 0; i < self->encl.nr_segments; i++) { + struct encl_segment *seg = &self->encl.segment_tbl[i]; + + total_size += seg->size; + } + + /* + * Actual enclave size is expected to be larger than the loaded + * test enclave since enclave size must be a power of 2 in bytes while + * test_encl does not consume it all. + */ + EXPECT_LT(total_size + PAGE_SIZE, self->encl.encl_size); + + /* + * mmap() a page at end of existing enclave to be used for dynamic + * EPC page. + */ + + addr = mmap((void *)self->encl.encl_base + total_size, PAGE_SIZE, + PROT_READ | PROT_WRITE | PROT_EXEC, MAP_SHARED | MAP_FIXED, + self->encl.fd, 0); + EXPECT_NE(addr, MAP_FAILED); + + self->run.exception_vector = 0; + self->run.exception_error_code = 0; + self->run.exception_addr = 0; + + /* + * Run EACCEPT on new page to trigger the #PF->EAUG->EACCEPT(again + * without a #PF). All should be transparent to userspace. + */ + eaccept_op.epc_addr = self->encl.encl_base + total_size; + eaccept_op.flags = SGX_SECINFO_R | SGX_SECINFO_W | SGX_SECINFO_REG | SGX_SECINFO_PENDING; + eaccept_op.ret = 0; + eaccept_op.header.type = ENCL_OP_EACCEPT; + + EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0); + + if (self->run.exception_vector == 14 && + self->run.exception_error_code == 4 && + self->run.exception_addr == self->encl.encl_base + total_size) { + munmap(addr, PAGE_SIZE); + SKIP(return, "Kernel does not support adding pages to initialized enclave"); + } + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + EXPECT_EQ(eaccept_op.ret, 0); + + /* + * New page should be accessible from within enclave - attempt to + * write to it. + */ + put_addr_op.value = MAGIC; + put_addr_op.addr = (unsigned long)addr; + put_addr_op.header.type = ENCL_OP_PUT_TO_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0); + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + /* + * Read memory from newly added page that was just written to, + * confirming that data previously written (MAGIC) is present. + */ + get_addr_op.value = 0; + get_addr_op.addr = (unsigned long)addr; + get_addr_op.header.type = ENCL_OP_GET_FROM_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0); + + EXPECT_EQ(get_addr_op.value, MAGIC); + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + munmap(addr, PAGE_SIZE); +} + TEST_HARNESS_MAIN -- 2.35.1

3 years, 4 months

1
0
0 0

[RFC PATCH v2.1 16/30] selftests/sgx: Add test for TCS page permission changes

by Jarkko Sakkinen

From: Reinette Chatre <reinette.chatre(a)intel.com> Kernel should not allow permission changes on TCS pages. Add test to confirm this behavior. Signed-off-by: Reinette Chatre <reinette.chatre(a)intel.com> --- tools/testing/selftests/sgx/main.c | 74 ++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c index aec3355d2ace..ea5f2e064687 100644 --- a/tools/testing/selftests/sgx/main.c +++ b/tools/testing/selftests/sgx/main.c @@ -121,6 +121,24 @@ static Elf64_Sym *vdso_symtab_get(struct vdso_symtab *symtab, const char *name) return NULL; } +/* + * Return the offset in the enclave where the TCS segment can be found. + * The first RW segment loaded is the TCS. + */ +static off_t encl_get_tcs_offset(struct encl *encl) +{ + int i; + + for (i = 0; i < encl->nr_segments; i++) { + struct encl_segment *seg = &encl->segment_tbl[i]; + + if (i == 0 && seg->prot == (PROT_READ | PROT_WRITE)) + return seg->offset; + } + + return -1; +} + /* * Return the offset in the enclave where the data segment can be found. * The first RW segment loaded is the TCS, skip that to get info on the @@ -567,6 +585,62 @@ TEST_F(enclave, pte_permissions) EXPECT_EQ(self->run.exception_addr, 0); } +/* + * Modifying permissions of TCS page should not be possible. + */ +TEST_F(enclave, tcs_permissions) +{ + struct sgx_enclave_restrict_perm ioc; + struct sgx_secinfo secinfo; + int ret, errno_save; + + ASSERT_TRUE(setup_test_encl(ENCL_HEAP_SIZE_DEFAULT, &self->encl, _metadata)); + + memset(&self->run, 0, sizeof(self->run)); + self->run.tcs = self->encl.encl_base; + + memset(&ioc, 0, sizeof(ioc)); + memset(&secinfo, 0, sizeof(secinfo)); + + /* + * Ensure kernel supports needed ioctl() and system supports needed + * commands. + */ + + ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS, &ioc); + errno_save = ret == -1 ? errno : 0; + + /* + * Invalid parameters were provided during sanity check, + * expect command to fail. + */ + ASSERT_EQ(ret, -1); + + /* ret == -1 */ + if (errno_save == ENOTTY) + SKIP(return, + "Kernel does not support SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS ioctl()"); + else if (errno_save == ENODEV) + SKIP(return, "System does not support SGX2"); + + /* + * Attempt to make TCS page read-only. This is not allowed and + * should be prevented by the kernel. + */ + secinfo.flags = PROT_READ; + ioc.offset = encl_get_tcs_offset(&self->encl); + ioc.length = PAGE_SIZE; + ioc.secinfo = (unsigned long)&secinfo; + + ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS, &ioc); + errno_save = ret == -1 ? errno : 0; + + EXPECT_EQ(ret, -1); + EXPECT_EQ(errno_save, EINVAL); + EXPECT_EQ(ioc.result, 0); + EXPECT_EQ(ioc.count, 0); +} + /* * Enclave page permission test. * -- 2.35.1

3 years, 4 months

1
0
0 0

[RFC PATCH v2.1 15/30] selftests/sgx: Add test for EPCM permission changes

by Jarkko Sakkinen

From: Reinette Chatre <reinette.chatre(a)intel.com> EPCM permission changes could be made from within (to relax permissions) or out (to restrict permissions) the enclave. Kernel support is needed when permissions are restricted to be able to call the privileged ENCLS[EMODPR] instruction and ensure PTEs allowing the restricted permissions are flushed. EPCM permissions can be relaxed via ENCLU[EMODPE] from within the enclave but the enclave still depends on the kernel to install PTEs with the new permissions. Add a test that exercises a few of the enclave page permission flows: 1) Test starts with a RW (from enclave and kernel perspective) enclave page that is mapped via a RW VMA. 2) Use the SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS ioctl() to restrict the enclave (EPCM) page permissions to read-only (kernel removes PTE in the process). 3) Run ENCLU[EACCEPT] from within the enclave to accept the new page permissions. 4) Attempt to write to the enclave page from within the enclave - this should fail with a page fault on the PTE since the page table entry accurately reflects the (read-only) EPCM permissions. 5) Restore EPCM permissions to RW by running ENCLU[EMODPE] from within the enclave. 6) Attempt to write to the enclave page from within the enclave - this should fail again with a page fault because even though the EPCM permissions are RW the PTE does not yet reflect that. 7) Use the SGX_IOC_ENCLAVE_RELAX_PERMISSIONS ioctl() to inform the kernel of new page permissions and PTEs will accurately reflect RW EPCM permissions. 8) Writing to enclave page from within enclave succeeds. Signed-off-by: Reinette Chatre <reinette.chatre(a)intel.com> --- tools/testing/selftests/sgx/defines.h | 15 ++ tools/testing/selftests/sgx/main.c | 234 ++++++++++++++++++++++++ tools/testing/selftests/sgx/test_encl.c | 38 ++++ 3 files changed, 287 insertions(+) diff --git a/tools/testing/selftests/sgx/defines.h b/tools/testing/selftests/sgx/defines.h index 02d775789ea7..b638eb98c80c 100644 --- a/tools/testing/selftests/sgx/defines.h +++ b/tools/testing/selftests/sgx/defines.h @@ -24,6 +24,8 @@ enum encl_op_type { ENCL_OP_PUT_TO_ADDRESS, ENCL_OP_GET_FROM_ADDRESS, ENCL_OP_NOP, + ENCL_OP_EACCEPT, + ENCL_OP_EMODPE, ENCL_OP_MAX, }; @@ -53,4 +55,17 @@ struct encl_op_get_from_addr { uint64_t addr; }; +struct encl_op_eaccept { + struct encl_op_header header; + uint64_t epc_addr; + uint64_t flags; + uint64_t ret; +}; + +struct encl_op_emodpe { + struct encl_op_header header; + uint64_t epc_addr; + uint64_t flags; +}; + #endif /* DEFINES_H */ diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c index dd74fa42302e..aec3355d2ace 100644 --- a/tools/testing/selftests/sgx/main.c +++ b/tools/testing/selftests/sgx/main.c @@ -25,6 +25,18 @@ static const uint64_t MAGIC = 0x1122334455667788ULL; static const uint64_t MAGIC2 = 0x8877665544332211ULL; vdso_sgx_enter_enclave_t vdso_sgx_enter_enclave; +/* + * Security Information (SECINFO) data structure needed by a few SGX + * instructions (eg. ENCLU[EACCEPT] and ENCLU[EMODPE]) holds meta-data + * about an enclave page. &enum sgx_secinfo_page_state specifies the + * secinfo flags used for page state. + */ +enum sgx_secinfo_page_state { + SGX_SECINFO_PENDING = (1 << 3), + SGX_SECINFO_MODIFIED = (1 << 4), + SGX_SECINFO_PR = (1 << 5), +}; + struct vdso_symtab { Elf64_Sym *elf_symtab; const char *elf_symstrtab; @@ -555,4 +567,226 @@ TEST_F(enclave, pte_permissions) EXPECT_EQ(self->run.exception_addr, 0); } +/* + * Enclave page permission test. + * + * Modify and restore enclave page's EPCM (enclave) permissions from + * outside enclave (ENCLS[EMODPR] via kernel) as well as from within + * enclave (via ENCLU[EMODPE]). Kernel should ensure PTE permissions + * are the same as the EPCM permissions so check for page fault if + * VMA allows access but EPCM and PTE does not. + */ +TEST_F(enclave, epcm_permissions) +{ + struct sgx_enclave_restrict_perm restrict_ioc; + struct encl_op_get_from_addr get_addr_op; + struct encl_op_put_to_addr put_addr_op; + struct encl_op_eaccept eaccept_op; + struct encl_op_emodpe emodpe_op; + struct sgx_secinfo secinfo; + unsigned long data_start; + int ret, errno_save; + + ASSERT_TRUE(setup_test_encl(ENCL_HEAP_SIZE_DEFAULT, &self->encl, _metadata)); + + memset(&self->run, 0, sizeof(self->run)); + self->run.tcs = self->encl.encl_base; + + /* + * Ensure kernel supports needed ioctl() and system supports needed + * commands. + */ + memset(&restrict_ioc, 0, sizeof(restrict_ioc)); + memset(&secinfo, 0, sizeof(secinfo)); + + ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS, + &restrict_ioc); + errno_save = ret == -1 ? errno : 0; + + /* + * Invalid parameters were provided during sanity check, + * expect command to fail. + */ + ASSERT_EQ(ret, -1); + + /* ret == -1 */ + if (errno_save == ENOTTY) + SKIP(return, + "Kernel does not support SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS ioctl()"); + else if (errno_save == ENODEV) + SKIP(return, "System does not support SGX2"); + + /* + * Page that will have its permissions changed is the second data + * page in the .data segment. This forms part of the local encl_buffer + * within the enclave. + * + * At start of test @data_start should have EPCM as well as PTE + * permissions of RW. + */ + + data_start = self->encl.encl_base + + encl_get_data_offset(&self->encl) + PAGE_SIZE; + + /* + * Sanity check that page at @data_start is writable before making + * any changes to page permissions. + * + * Start by writing MAGIC to test page. + */ + put_addr_op.value = MAGIC; + put_addr_op.addr = data_start; + put_addr_op.header.type = ENCL_OP_PUT_TO_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0); + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + /* + * Read memory that was just written to, confirming that + * page is writable. + */ + get_addr_op.value = 0; + get_addr_op.addr = data_start; + get_addr_op.header.type = ENCL_OP_GET_FROM_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0); + + EXPECT_EQ(get_addr_op.value, MAGIC); + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + /* + * Change EPCM permissions to read-only, PTE entry flushed by + * kernel in the process. + */ + memset(&restrict_ioc, 0, sizeof(restrict_ioc)); + memset(&secinfo, 0, sizeof(secinfo)); + + secinfo.flags = PROT_READ; + restrict_ioc.offset = encl_get_data_offset(&self->encl) + PAGE_SIZE; + restrict_ioc.length = PAGE_SIZE; + restrict_ioc.secinfo = (unsigned long)&secinfo; + + ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS, + &restrict_ioc); + errno_save = ret == -1 ? errno : 0; + + EXPECT_EQ(ret, 0); + EXPECT_EQ(errno_save, 0); + EXPECT_EQ(restrict_ioc.result, 0); + EXPECT_EQ(restrict_ioc.count, 4096); + + /* + * EPCM permissions changed from kernel, need to EACCEPT from enclave. + */ + eaccept_op.epc_addr = data_start; + eaccept_op.flags = PROT_READ | SGX_SECINFO_REG | SGX_SECINFO_PR; + eaccept_op.ret = 0; + eaccept_op.header.type = ENCL_OP_EACCEPT; + + EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0); + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + EXPECT_EQ(eaccept_op.ret, 0); + + /* + * EPCM permissions of page is now read-only, expect #PF + * on PTE (not EPCM) when attempting to write to page from + * within enclave. + */ + put_addr_op.value = MAGIC2; + + EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0); + + EXPECT_EQ(self->run.function, ERESUME); + EXPECT_EQ(self->run.exception_vector, 14); + EXPECT_EQ(self->run.exception_error_code, 0x7); + EXPECT_EQ(self->run.exception_addr, data_start); + + self->run.exception_vector = 0; + self->run.exception_error_code = 0; + self->run.exception_addr = 0; + + /* + * Received AEX but cannot return to enclave at same entrypoint, + * need different TCS from where EPCM permission can be made writable + * again. + */ + self->run.tcs = self->encl.encl_base + PAGE_SIZE; + + /* + * Enter enclave at new TCS to change EPCM permissions to be + * writable again and thus fix the page fault that triggered the + * AEX. + */ + + emodpe_op.epc_addr = data_start; + emodpe_op.flags = PROT_READ | PROT_WRITE; + emodpe_op.header.type = ENCL_OP_EMODPE; + + EXPECT_EQ(ENCL_CALL(&emodpe_op, &self->run, true), 0); + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + /* + * Attempt to return to main TCS to resume execution at faulting + * instruction, but PTE should still prevent writing to the page. + */ + self->run.tcs = self->encl.encl_base; + + EXPECT_EQ(vdso_sgx_enter_enclave((unsigned long)&put_addr_op, 0, 0, + ERESUME, 0, 0, + &self->run), + 0); + + EXPECT_EQ(self->run.function, ERESUME); + EXPECT_EQ(self->run.exception_vector, 14); + EXPECT_EQ(self->run.exception_error_code, 0x7); + EXPECT_EQ(self->run.exception_addr, data_start); + + self->run.exception_vector = 0; + self->run.exception_error_code = 0; + self->run.exception_addr = 0; + + /* + * Wrong page permissions that caused original fault has + * now been fixed via EPCM permissions as well as PTE. + * Resume execution in main TCS to re-attempt the memory access. + */ + self->run.tcs = self->encl.encl_base; + + EXPECT_EQ(vdso_sgx_enter_enclave((unsigned long)&put_addr_op, 0, 0, + ERESUME, 0, 0, + &self->run), + 0); + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + get_addr_op.value = 0; + + EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0); + + EXPECT_EQ(get_addr_op.value, MAGIC2); + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.user_data, 0); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); +} + TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/sgx/test_encl.c b/tools/testing/selftests/sgx/test_encl.c index 4fca01cfd898..5b6c65331527 100644 --- a/tools/testing/selftests/sgx/test_encl.c +++ b/tools/testing/selftests/sgx/test_encl.c @@ -11,6 +11,42 @@ */ static uint8_t encl_buffer[8192] = { 1 }; +enum sgx_enclu_function { + EACCEPT = 0x5, + EMODPE = 0x6, +}; + +static void do_encl_emodpe(void *_op) +{ + struct sgx_secinfo secinfo __aligned(sizeof(struct sgx_secinfo)) = {0}; + struct encl_op_emodpe *op = _op; + + secinfo.flags = op->flags; + + asm volatile(".byte 0x0f, 0x01, 0xd7" + : + : "a" (EMODPE), + "b" (&secinfo), + "c" (op->epc_addr)); +} + +static void do_encl_eaccept(void *_op) +{ + struct sgx_secinfo secinfo __aligned(sizeof(struct sgx_secinfo)) = {0}; + struct encl_op_eaccept *op = _op; + int rax; + + secinfo.flags = op->flags; + + asm volatile(".byte 0x0f, 0x01, 0xd7" + : "=a" (rax) + : "a" (EACCEPT), + "b" (&secinfo), + "c" (op->epc_addr)); + + op->ret = rax; +} + static void *memcpy(void *dest, const void *src, size_t n) { size_t i; @@ -62,6 +98,8 @@ void encl_body(void *rdi, void *rsi) do_encl_op_put_to_addr, do_encl_op_get_from_addr, do_encl_op_nop, + do_encl_eaccept, + do_encl_emodpe, }; struct encl_op_header *op = (struct encl_op_header *)rdi; -- 2.35.1

3 years, 4 months

1
0
0 0

[PATCH] userfaultfd/selftests: fix uninitialized_var.cocci warning

by Guo Zhengkui

fix following coccicheck warning: tools/testing/selftests/vm/userfaultfd.c:556:23-24: WARNING this kind of initialization is deprecated `unsigned long page_nr = *(&page_nr)` has the same form of uninitialized_var() macro. I remove the redundant assignement. It has been tested with gcc (Debian 8.3.0-6) 8.3.0. The patch which removed uninitialized_var() is: https://lore.kernel.org/all/20121028102007.GA7547@gmail.com/ And there is very few "/* GCC */" comments in the Linux kernel code now. Signed-off-by: Guo Zhengkui <guozhengkui(a)vivo.com> --- tools/testing/selftests/vm/userfaultfd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index fe404398c65a..203c4a2c2109 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -553,7 +553,7 @@ static void continue_range(int ufd, __u64 start, __u64 len) static void *locking_thread(void *arg) { unsigned long cpu = (unsigned long) arg; - unsigned long page_nr = *(&(page_nr)); /* uninitialized warning */ + unsigned long page_nr; unsigned long long count; if (!(bounces & BOUNCE_RANDOM)) { -- 2.20.1

3 years, 4 months

1
0
0 0

<> Negative SEO Services <>

by Jayson

Hi, If you ever need Negative SEO Serrvices, we offer it here https://blackhatsem.co Unsubscribe: https://mgdots.co/unsubscribe/

3 years, 4 months

1
0
0 0

[PATCH] selftests: vm: fix clang build error multiple output files

by Yosry Ahmed

When building the vm selftests using clang, some errors are seen due to having headers in the compilation command: clang -Wall -I ../../../../usr/include -no-pie gup_test.c ../../../../mm/gup_test.h -lrt -lpthread -o .../tools/testing/selftests/vm/gup_test clang: error: cannot specify -o when generating multiple output files make[1]: *** [../lib.mk:146: .../tools/testing/selftests/vm/gup_test] Error 1 Rework to add the header files to LOCAL_HDRS before including ../lib.mk, since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in file lib.mk. Signed-off-by: Yosry Ahmed <yosryahmed(a)google.com> --- This patch was inspired by: https://lore.kernel.org/lkml/20211105162530.3307666-1-anders.roxell@linaro.… --- tools/testing/selftests/vm/Makefile | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile index 1607322a112c..a14b5b800897 100644 --- a/tools/testing/selftests/vm/Makefile +++ b/tools/testing/selftests/vm/Makefile @@ -1,6 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for vm selftests +LOCAL_HDRS += $(selfdir)/vm/local_config.h $(top_srcdir)/mm/gup_test.h + include local_config.mk uname_M := $(shell uname -m 2>/dev/null || echo not) @@ -140,10 +142,6 @@ endif $(OUTPUT)/mlock-random-test $(OUTPUT)/memfd_secret: LDLIBS += -lcap -$(OUTPUT)/gup_test: ../../../../mm/gup_test.h - -$(OUTPUT)/hmm-tests: local_config.h - # HMM_EXTRA_LIBS may get set in local_config.mk, or it may be left empty. $(OUTPUT)/hmm-tests: LDLIBS += $(HMM_EXTRA_LIBS) -- 2.35.1.616.g0bdcbb4464-goog

3 years, 4 months

1
0
0 0

Re: [PATCH 1/2] kselftest/vm: Rename TARGETS to BUILD_TARGETS

by Yosry Ahmed

I ran into the same problem when running: make -C tools/testing/selftests TARGETS=vm I was going to send a fix but I found this one deep in the mailing list. Reviewed-by: Yosry Ahmed <yosryahmed(a)google.com>

3 years, 4 months

1
0
0 0

[PATCH V2 1/3] selftests: add kselftest_install to .gitignore

by Muhammad Usama Anjum

Add kselftest_install directory to the .gitignore which is created while creation of tar ball of objects: make -C tools/testing/selftests gen_tar Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- Changes in V2: Break up the patch in individual test patches Remove changes related to net selftest --- tools/testing/selftests/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/.gitignore b/tools/testing/selftests/.gitignore index 055a5019b13c..cb24124ac5b9 100644 --- a/tools/testing/selftests/.gitignore +++ b/tools/testing/selftests/.gitignore @@ -3,6 +3,7 @@ gpiogpio-event-mon gpiogpio-hammer gpioinclude/ gpiolsgpio +kselftest_install/ tpm2/SpaceTest.log # Python bytecode and cache -- 2.30.2

3 years, 4 months

2
5
0 0

[PATCH V2] selftests: Fix build when $(O) points to a relative path

by Muhammad Usama Anjum

Build of bpf and tc-testing selftests fails when the relative path of the build directory is specified. make -C tools/testing/selftests O=build0 make[1]: Entering directory '/linux_mainline/tools/testing/selftests/bpf' ../../../scripts/Makefile.include:4: *** O=build0 does not exist. Stop. make[1]: Entering directory '/linux_mainline/tools/testing/selftests/tc-testing' ../../../scripts/Makefile.include:4: *** O=build0 does not exist. Stop. Makefiles of bpf and tc-testing include scripts/Makefile.include file. This file has sanity checking inside it which checks the output path. The output path is not relative to the bpf or tc-testing. The sanity check fails. Expand the output path to get rid of this error. The fix is the same as mentioned in commit 150a27328b68 ("bpf, preload: Fix build when $(O) points to a relative path"). Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- Changes in V2: Add more explaination to the commit message. Support make install as well. --- tools/testing/selftests/Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 4eda7c7c15694..6a5c25fcc9cfc 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -178,6 +178,7 @@ all: khdr BUILD_TARGET=$$BUILD/$$TARGET; \ mkdir $$BUILD_TARGET -p; \ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET \ + O=$(abs_objtree) \ $(if $(FORCE_TARGETS),|| exit); \ ret=$$((ret * $$?)); \ done; exit $$ret; @@ -185,7 +186,8 @@ all: khdr run_tests: all @for TARGET in $(TARGETS); do \ BUILD_TARGET=$$BUILD/$$TARGET; \ - $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\ + $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests \ + O=$(abs_objtree); \ done; hotplug: @@ -236,6 +238,7 @@ ifdef INSTALL_PATH for TARGET in $(TARGETS); do \ BUILD_TARGET=$$BUILD/$$TARGET; \ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install \ + O=$(abs_objtree) \ $(if $(FORCE_TARGETS),|| exit); \ ret=$$((ret * $$?)); \ done; exit $$ret; -- 2.30.2

3 years, 4 months

2
5
0 0

lkft kselftest for next-20220302

by lkft＠linaro.org

## Build * kernel: 5.17.0-rc6 * git: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next * git branch: [None, 'master'] * git commit: adaedcf826dccf01b69d9a1f1997c9446c6b2c54 * git describe: next-20220302 * test details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20220302 ## Test Regressions (compared to next-20220301) No test regressions found. ## Metric Regressions (compared to next-20220301) No metric regressions found. Tested-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Test Fixes (compared to next-20220301) No test fixes found. ## Metric Fixes (compared to next-20220301) No metric fixes found. ## Test result summary total: 1656, pass: 951, fail: 179, skip: 526, xfail: 0 ## Build Summary ## Test suites summary * kselftest-android * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers * kselftest-efivarfs * kselftest-filesystems * kselftest-firmware * kselftest-fpu * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-membarrier * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-vm * kselftest-x86 * kselftest-zram -- Linaro LKFT https://lkft.linaro.org

3 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror