- Linux-kselftest-mirror - lists.linaro.org

[PATCH AUTOSEL 5.15 031/146] selftests: net: fib_nexthops: Wait before checking reported idle time

by Sasha Levin

From: Petr Machata <petrm(a)nvidia.com> [ Upstream commit b69c99463d414cc263411462d52f25205657e9af ] The purpose of this test is to verify that after a short activity passes, the reported time is reasonable: not zero (which could be reported by mistake), and not something outrageous (which would be indicative of an issue in used units). However, the idle time is reported in units of clock_t, or hundredths of second. If the initial sequence of commands is very quick, it is possible that the idle time is reported as just flat-out zero. When this test was recently enabled in our nightly regression, we started seeing spurious failures for exactly this reason. Therefore buffer the delay leading up to the test with a sleep, to make sure there is no legitimate way of reporting 0. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/net/fib_nexthops.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/net/fib_nexthops.sh b/tools/testing/selftests/net/fib_nexthops.sh index 0d293391e9a44..b5a69ad191b07 100755 --- a/tools/testing/selftests/net/fib_nexthops.sh +++ b/tools/testing/selftests/net/fib_nexthops.sh @@ -2078,6 +2078,7 @@ basic_res() "id 101 index 0 nhid 2 id 101 index 1 nhid 2 id 101 index 2 nhid 1 id 101 index 3 nhid 1" log_test $? 0 "Dump all nexthop buckets in a group" + sleep 0.1 (( $($IP -j nexthop bucket list id 101 | jq '[.[] | select(.bucket.idle_time > 0 and .bucket.idle_time < 2)] | length') == 4 )) -- 2.33.0

3 years, 8 months

1
0
0 0

[PATCH net-next 0/6] Add RTNL interface for SyncE

by Maciej Machnikowski

Synchronous Ethernet networks use a physical layer clock to syntonize the frequency across different network elements. Basic SyncE node defined in the ITU-T G.8264 consist of an Ethernet Equipment Clock (EEC) and have the ability to recover synchronization from the synchronization inputs - either traffic interfaces or external frequency sources. The EEC can synchronize its frequency (syntonize) to any of those sources. It is also able to select synchronization source through priority tables and synchronization status messaging. It also provides neccessary filtering and holdover capabilities This patch series introduces basic interface for reading the Ethernet Equipment Clock (EEC) state on a SyncE capable device. This state gives information about the source of the syntonization signal (ether my port, or any external one) and the state of EEC. This interface is required\ to implement Synchronization Status Messaging on upper layers. RFC history: v2: - removed whitespace changes - fix issues reported by test robot v3: - Changed naming from SyncE to EEC - Clarify cover letter and commit message for patch 1 v4: - Removed sync_source and pin_idx info - Changed one structure to attributes - Added EEC_SRC_PORT flag to indicate that the EEC is synchronized to the recovered clock of a port that returns the state v5: - add EEC source as an optiona attribute - implement support for recovered clocks - align states returned by EEC to ITU-T G.781 v6: - fix EEC clock state reporting - add documentation - fix descriptions in code comments Maciej Machnikowski (6): ice: add support detecting features based on netlist rtnetlink: Add new RTM_GETEECSTATE message to get SyncE status ice: add support for reading SyncE DPLL state rtnetlink: Add support for SyncE recovered clock configuration ice: add support for SyncE recovered clocks docs: net: Add description of SyncE interfaces Documentation/networking/synce.rst | 88 ++++++ drivers/net/ethernet/intel/ice/ice.h | 7 + .../net/ethernet/intel/ice/ice_adminq_cmd.h | 94 ++++++- drivers/net/ethernet/intel/ice/ice_common.c | 224 ++++++++++++++++ drivers/net/ethernet/intel/ice/ice_common.h | 20 +- drivers/net/ethernet/intel/ice/ice_devids.h | 3 + drivers/net/ethernet/intel/ice/ice_lib.c | 6 +- drivers/net/ethernet/intel/ice/ice_main.c | 138 ++++++++++ drivers/net/ethernet/intel/ice/ice_ptp.c | 34 +++ drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 49 ++++ drivers/net/ethernet/intel/ice/ice_ptp_hw.h | 22 ++ drivers/net/ethernet/intel/ice/ice_type.h | 1 + include/linux/netdevice.h | 33 +++ include/uapi/linux/if_link.h | 57 ++++ include/uapi/linux/rtnetlink.h | 10 + net/core/rtnetlink.c | 253 ++++++++++++++++++ security/selinux/nlmsgtab.c | 6 +- 17 files changed, 1041 insertions(+), 4 deletions(-) create mode 100644 Documentation/networking/synce.rst -- 2.26.3

3 years, 8 months

5
14
0 0

[PATCH] selftests: net: tls: remove unused variable and code

by Anders Roxell

When building selftests/net with clang, the compiler warn about the function abs() see below: tls.c:657:15: warning: variable 'len_compared' set but not used [-Wunused-but-set-variable] unsigned int len_compared = 0; ^ Rework to remove the unused variable and the for-loop where the variable 'len_compared' was assinged. Signed-off-by: Anders Roxell <anders.roxell(a)linaro.org> --- tools/testing/selftests/net/tls.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index d3047e251fe9..e61fc4c32ba2 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -654,7 +654,6 @@ TEST_F(tls, recvmsg_single_max) TEST_F(tls, recvmsg_multiple) { unsigned int msg_iovlen = 1024; - unsigned int len_compared = 0; struct iovec vec[1024]; char *iov_base[1024]; unsigned int iov_len = 16; @@ -675,8 +674,6 @@ TEST_F(tls, recvmsg_multiple) hdr.msg_iovlen = msg_iovlen; hdr.msg_iov = vec; EXPECT_NE(recvmsg(self->cfd, &hdr, 0), -1); - for (i = 0; i < msg_iovlen; i++) - len_compared += iov_len; for (i = 0; i < msg_iovlen; i++) free(iov_base[i]); -- 2.33.0

3 years, 8 months

3
2
0 0

[REGRESSION] lkft kselftest for next-20211106

by lkft＠linaro.org

## Build * kernel: 5.15.0 * git: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next * git branch: master * git commit: 6a37ebbe07bf72cd5fd791d67a664f37c8f17a13 * git describe: next-20211106 * test details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20211106 ## Regressions (compared to next-20211105) * i386, kselftest-rtc - rtc.rtctest * qemu_arm, kselftest-rtc - rtc.rtctest Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Fixes (compared to next-20211105) * i386, kselftest-net - net.so_txtime.sh ## Test result summary total: 2855, pass: 1688, fail: 254, skip: 913, xfail: 0 ## Build Summary ## Test suites summary * kselftest-android * kselftest-arm64 * kselftest-arm64/arm64.btitest.bti_c_func * kselftest-arm64/arm64.btitest.bti_j_func * kselftest-arm64/arm64.btitest.bti_jc_func * kselftest-arm64/arm64.btitest.bti_none_func * kselftest-arm64/arm64.btitest.nohint_func * kselftest-arm64/arm64.btitest.paciasp_func * kselftest-arm64/arm64.nobtitest.bti_c_func * kselftest-arm64/arm64.nobtitest.bti_j_func * kselftest-arm64/arm64.nobtitest.bti_jc_func * kselftest-arm64/arm64.nobtitest.bti_none_func * kselftest-arm64/arm64.nobtitest.nohint_func * kselftest-arm64/arm64.nobtitest.paciasp_func * kselftest-bpf * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers * kselftest-efivarfs * kselftest-filesystems * kselftest-firmware * kselftest-fpu * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-lkdtm * kselftest-membarrier * kselftest-net * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-vm * kselftest-x86 * kselftest-zram -- Linaro LKFT https://lkft.linaro.org

3 years, 8 months

1
0
0 0

[REGRESSION] lkft kselftest for next-20211105

by lkft＠linaro.org

## Build * kernel: 5.15.0 * git: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next * git branch: master * git commit: b477ae38e81579a32caca7f4fb428275cb6b46c1 * git describe: next-20211105 * test details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20211105 ## Regressions (compared to next-20211104) * i386, kselftest-net - net.fib-onlink-tests.sh - net.so_txtime.sh * qemu_i386, kselftest-rtc - rtc.rtctest Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Fixes (compared to next-20211104) * qemu_arm, kselftest-timers - timers.rtcpie * qemu_x86_64, kselftest-rtc - rtc.rtctest ## Test result summary total: 3111, pass: 1811, fail: 267, skip: 1033, xfail: 0 ## Build Summary ## Test suites summary * kselftest-android * kselftest-arm64 * kselftest-arm64/arm64.btitest.bti_c_func * kselftest-arm64/arm64.btitest.bti_j_func * kselftest-arm64/arm64.btitest.bti_jc_func * kselftest-arm64/arm64.btitest.bti_none_func * kselftest-arm64/arm64.btitest.nohint_func * kselftest-arm64/arm64.btitest.paciasp_func * kselftest-arm64/arm64.nobtitest.bti_c_func * kselftest-arm64/arm64.nobtitest.bti_j_func * kselftest-arm64/arm64.nobtitest.bti_jc_func * kselftest-arm64/arm64.nobtitest.bti_none_func * kselftest-arm64/arm64.nobtitest.nohint_func * kselftest-arm64/arm64.nobtitest.paciasp_func * kselftest-bpf * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers * kselftest-efivarfs * kselftest-filesystems * kselftest-firmware * kselftest-fpu * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-lkdtm * kselftest-membarrier * kselftest-net * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-vm * kselftest-x86 * kselftest-zram -- Linaro LKFT https://lkft.linaro.org

3 years, 8 months

1
0
0 0

[PATCH v2] tcp: Initial support for RFC5925 auth option

by Leonard Crestez

This is similar to TCP MD5 in functionality but it's sufficiently different that wire formats are incompatible. Compared to TCP-MD5 more algorithms are supported and multiple keys can be used on the same connection but there is still no negotiation mechanism. Expected use-case is protecting long-duration BGP/LDP connections between routers using pre-shared keys. The goal of this series is to allow routers using the linux TCP stack to interoperate with vendors such as Cisco and Juniper. Both algorithms described in RFC5926 are implemented but the code is not very easily extensible beyond that. In particular there are several code paths making stack allocations based on RFC5926 maximum, those would have to be increased. This version implements SNE and l3mdev awareness and adds more tests. Here are some known flaws and limitations: * Interaction with TCP-MD5 not tested in all corners * Interaction with FASTOPEN not tested and unlikely to work because sequence number assumptions for syn/ack. * Not clear if crypto_shash_setkey might sleep. If some implementation do that then maybe they could be excluded through alloc flags. * Traffic key is not cached (reducing performance) * User is responsible for ensuring keys do not overlap. * There is no useful way to list keys, making userspace debug difficult. * There is no prefixlen support equivalent to md5. This is used in some complex FRR configs. Test suite was added to tools/selftests/tcp_authopt. Tests are written in python using pytest and scapy and check the API in some detail and validate packet captures. Python code is already used in linux and in kselftests but virtualenvs not very much, this particular test suite uses `pip` to create a private virtualenv and hide dependencies. This actually forms the bulk of the series by raw line-count. Since there is a lot of code it was mostly split on "functional area" so most files are only affected by a single code. A lot of those tests are relevant to TCP-MD5 so perhaps it might help to split into a separate series? Some testing support is included in nettest and fcnal-test.sh, similar to the current level of tcp-md5 testing. SNE was tested by creating connections in a loop until a large SEQ is randomly selected and then making it rollover. The "connect in a loop" step ran into timewait overflow and connection failure on port reuse. After spending some time on this issue and my conclusion is that AO makes it impossible to kill remainders of old connections in a manner similar to unsigned or md5sig, this is because signatures are dependent on ISNs. This means that if a timewait socket is closed improperly then information required to RST the peer is lost. The fact that AO completely breaks all connection-less RSTs is acknowledged in the RFC and the workaround of "respect timewait" seems acceptable. Changes for frr (old): https://github.com/FRRouting/frr/pull/9442 That PR was made early for ABI feedback, it has many issues. Changes for yabgp (old): https://github.com/cdleonard/yabgp/commits/tcp_authopt This can be use for easy interoperability testing with cisco/juniper/etc. Changes since PATCH v1: * Implement Sequence Number Extension * Implement l3index for vrf: TCP_AUTHOPT_KEY_IFINDEX as equivalent of TCP_MD5SIG_FLAG_IFINDEX * Expand TCP-AO tests in fcnal-test.sh to near-parity with md5. * Show addr/port on failure similar to md5 * Remove tox dependency from test suite (create venv directly) * Switch default pytest output format to TAP (kselftest standard) * Fix _copy_from_sockptr_tolerant stack corruption on short sockopts. This was covered in test but error was invisible without STACKPROTECTOR=y * Fix sysctl_tcp_authopt check in tcp_get_authopt_val before memset. This was harmless because error code is checked in getsockopt anyway. * Fix dropping md5 packets on all sockets with AO enabled * Fix checking (key->recv_id & TCP_AUTHOPT_KEY_ADDR_BIND) instead of key->flags in tcp_authopt_key_match_exact * Fix PATCH 1/19 not compiling due to missing "int err" declaration * Add ratelimited message for AO and MD5 both present * Export all symbols required by CONFIG_IPV6=m (again) * Fix compilation with CONFIG_TCP_AUTHOPT=y CONFIG_TCP_MD5SIG=n * Fix checkpatch issues * Pass -rrequirements.txt to tox to avoid dependency variation. Link: https://lore.kernel.org/netdev/cover.1632240523.git.cdleonard@gmail.com/ Changes since RFCv3: * Implement TCP_AUTHOPT handling for timewait and reset replies. Write tests to execute these paths by injecting packets with scapy * Handle combining md5 and authopt: if both are configured use authopt. * Fix locking issues around send_key, introduced in on of the later patches. * Handle IPv4-mapped-IPv6 addresses: it used to be that an ipv4 SYN sent to an ipv6 socket with TCP-AO triggered WARN * Implement un-namespaced sysctl disabled this feature by default * Allocate new key before removing any old one in setsockopt (Dmitry) * Remove tcp_authopt_key_info.local_id because it's no longer used (Dmitry) * Propagate errors from TCP_AUTHOPT getsockopt (Dmitry) * Fix no-longer-correct TCP_AUTHOPT_KEY_DEL docs (Dmitry) * Simplify crypto allocation (Eric) * Use kzmalloc instead of __GFP_ZERO (Eric) * Add static_key_false tcp_authopt_needed (Eric) * Clear authopt_info copied from oldsk in __tcp_authopt_openreq (Eric) * Replace memcmp in ipv4 and ipv6 addr comparisons (Eric) * Export symbols for CONFIG_IPV6=m (kernel test robot) * Mark more functions static (kernel test robot) * Fix build with CONFIG_PROVE_RCU_LIST=y (kernel test robot) Link: https://lore.kernel.org/netdev/cover.1629840814.git.cdleonard@gmail.com/ Changes since RFCv2: * Removed local_id from ABI and match on send_id/recv_id/addr * Add all relevant out-of-tree tests to tools/testing/selftests * Return an error instead of ignoring unknown flags, hopefully this makes it easier to extend. * Check sk_family before __tcp_authopt_info_get_or_create in tcp_set_authopt_key * Use sock_owned_by_me instead of WARN_ON(!lockdep_sock_is_held(sk)) * Fix some intermediate build failures reported by kbuild robot * Improve documentation Link: https://lore.kernel.org/netdev/cover.1628544649.git.cdleonard@gmail.com/ Changes since RFC: * Split into per-topic commits for ease of review. The intermediate commits compile with a few "unused function" warnings and don't do anything useful by themselves. * Add ABI documention including kernel-doc on uapi * Fix lockdep warnings from crypto by creating pools with one shash for each cpu * Accept short options to setsockopt by padding with zeros; this approach allows increasing the size of the structs in the future. * Support for aes-128-cmac-96 * Support for binding addresses to keys in a way similar to old tcp_md5 * Add support for retrieving received keyid/rnextkeyid and controling the keyid/rnextkeyid being sent. Link: https://lore.kernel.org/netdev/01383a8751e97ef826ef2adf93bfde3a08195a43.162… Leonard Crestez (25): tcp: authopt: Initial support and key management docs: Add user documentation for tcp_authopt selftests: Initial tcp_authopt test module selftests: tcp_authopt: Initial sockopt manipulation tcp: authopt: Add crypto initialization tcp: authopt: Compute packet signatures tcp: Use BIT() for OPTION_* constants tcp: authopt: Hook into tcp core tcp: authopt: Disable via sysctl by default selftests: tcp_authopt: Test key address binding tcp: authopt: Implement Sequence Number Extension tcp: ipv6: Add AO signing for tcp_v6_send_response tcp: authopt: Add support for signing skb-less replies tcp: ipv4: Add AO signing for skb-less replies selftests: tcp_authopt: Implement SNE in python selftests: tcp_authopt: Add scapy-based packet signing code selftests: tcp_authopt: Add packet-level tests selftests: tcp_authopt: Initial sne test tcp: authopt: Add key selection controls selftests: tcp_authopt: Add tests for rollover tcp: authopt: Add initial l3index support selftests: tcp_authopt: Initial tests for l3mdev handling selftests: nettest: Rename md5_prefix to key_addr_prefix selftests: nettest: Initial tcp_authopt support selftests: net/fcnal: Initial tcp_authopt support Documentation/networking/index.rst | 1 + Documentation/networking/ip-sysctl.rst | 6 + Documentation/networking/tcp_authopt.rst | 69 + include/linux/tcp.h | 9 + include/net/tcp.h | 1 + include/net/tcp_authopt.h | 271 +++ include/uapi/linux/snmp.h | 1 + include/uapi/linux/tcp.h | 123 ++ net/ipv4/Kconfig | 14 + net/ipv4/Makefile | 1 + net/ipv4/proc.c | 1 + net/ipv4/sysctl_net_ipv4.c | 10 + net/ipv4/tcp.c | 30 + net/ipv4/tcp_authopt.c | 1617 +++++++++++++++++ net/ipv4/tcp_input.c | 18 + net/ipv4/tcp_ipv4.c | 104 +- net/ipv4/tcp_minisocks.c | 12 + net/ipv4/tcp_output.c | 100 +- net/ipv6/tcp_ipv6.c | 60 +- tools/testing/selftests/net/fcnal-test.sh | 249 +++ tools/testing/selftests/net/nettest.c | 123 +- tools/testing/selftests/tcp_authopt/Makefile | 10 + .../testing/selftests/tcp_authopt/README.rst | 18 + tools/testing/selftests/tcp_authopt/config | 6 + .../selftests/tcp_authopt/requirements.txt | 46 + tools/testing/selftests/tcp_authopt/run.sh | 31 + tools/testing/selftests/tcp_authopt/settings | 1 + tools/testing/selftests/tcp_authopt/setup.cfg | 35 + tools/testing/selftests/tcp_authopt/setup.py | 6 + .../tcp_authopt/tcp_authopt_test/__init__.py | 0 .../tcp_authopt/tcp_authopt_test/conftest.py | 71 + .../full_tcp_sniff_session.py | 91 + .../tcp_authopt_test/linux_tcp_authopt.py | 285 +++ .../tcp_authopt_test/linux_tcp_md5sig.py | 110 ++ .../tcp_authopt_test/linux_tcp_repair.py | 67 + .../tcp_authopt_test/netns_fixture.py | 85 + .../tcp_authopt_test/scapy_conntrack.py | 173 ++ .../tcp_authopt_test/scapy_tcp_authopt.py | 220 +++ .../tcp_authopt_test/scapy_utils.py | 177 ++ .../tcp_authopt/tcp_authopt_test/server.py | 124 ++ .../tcp_authopt/tcp_authopt_test/sne_alg.py | 111 ++ .../tcp_authopt/tcp_authopt_test/sockaddr.py | 122 ++ .../tcp_connection_fixture.py | 276 +++ .../tcp_authopt/tcp_authopt_test/test_bind.py | 155 ++ .../tcp_authopt_test/test_rollover.py | 181 ++ .../tcp_authopt/tcp_authopt_test/test_sne.py | 202 ++ .../tcp_authopt_test/test_sne_alg.py | 96 + .../tcp_authopt_test/test_sockopt.py | 203 +++ .../tcp_authopt_test/test_vectors.py | 365 ++++ .../tcp_authopt_test/test_verify_capture.py | 559 ++++++ .../tcp_authopt_test/test_vrf_bind.py | 492 +++++ .../tcp_authopt/tcp_authopt_test/utils.py | 114 ++ .../tcp_authopt/tcp_authopt_test/validator.py | 138 ++ .../tcp_authopt_test/vrf_netns_fixture.py | 127 ++ 54 files changed, 7471 insertions(+), 46 deletions(-) create mode 100644 Documentation/networking/tcp_authopt.rst create mode 100644 include/net/tcp_authopt.h create mode 100644 net/ipv4/tcp_authopt.c create mode 100644 tools/testing/selftests/tcp_authopt/Makefile create mode 100644 tools/testing/selftests/tcp_authopt/README.rst create mode 100644 tools/testing/selftests/tcp_authopt/config create mode 100644 tools/testing/selftests/tcp_authopt/requirements.txt create mode 100755 tools/testing/selftests/tcp_authopt/run.sh create mode 100644 tools/testing/selftests/tcp_authopt/settings create mode 100644 tools/testing/selftests/tcp_authopt/setup.cfg create mode 100644 tools/testing/selftests/tcp_authopt/setup.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/__init__.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/conftest.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/full_tcp_sniff_session.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/linux_tcp_authopt.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/linux_tcp_md5sig.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/linux_tcp_repair.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/netns_fixture.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/scapy_conntrack.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/scapy_tcp_authopt.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/scapy_utils.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/server.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/sne_alg.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/sockaddr.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/tcp_connection_fixture.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/test_bind.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/test_rollover.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/test_sne.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/test_sne_alg.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/test_sockopt.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/test_vectors.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/test_verify_capture.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/test_vrf_bind.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/utils.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/validator.py create mode 100644 tools/testing/selftests/tcp_authopt/tcp_authopt_test/vrf_netns_fixture.py base-commit: d4a07dc5ac34528f292a4f328cf3c65aba312e1b -- 2.25.1

3 years, 8 months

5
54
0 0

[PATCH bpf 0/4] Fix some issues for selftest test_xdp_redirect_multi.sh

by Hangbin Liu

Jiri reported some issues in test_xdp_redirect_multi.sh. Like the test logs not cleaned after testing. The tcpdump not terminated cleanly. arp number count may have false positive. And the most important, after creating/deleting a lot interfaces, the interface index may exceed the DEVMAP max entry and cause program xdp_redirect_multi exec failed. This patch set fix all these issues. Hangbin Liu (4): selftests/bpf/xdp_redirect_multi: put the logs to tmp folder selftests/bpf/xdp_redirect_multi: use arping to accurate the arp number selftests/bpf/xdp_redirect_multi: give tcpdump a chance to terminate cleanly selftests/bpf/xdp_redirect_multi: limit the tests in netns .../selftests/bpf/test_xdp_redirect_multi.sh | 62 +++++++++++-------- .../selftests/bpf/xdp_redirect_multi.c | 4 +- 2 files changed, 37 insertions(+), 29 deletions(-) -- 2.31.1

3 years, 8 months

2
5
0 0

[PATCH] selftests: timers: Remove unneeded semicolon

by cgel.zte＠gmail.com

From: Zhang Mingyu <zhang.mingyu(a)zte.com.cn> Eliminate the following coccinelle check warning: tools/testing/selftests/timers/inconsistency-check.c:75:2-3 Reported-by: Zeal Robot <zealci(a)zte.com.cn> Signed-off-by: Zhang Mingyu <zhang.mingyu(a)zte.com.cn> --- tools/testing/selftests/timers/inconsistency-check.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/timers/inconsistency-check.c b/tools/testing/selftests/timers/inconsistency-check.c index 022d3ffe3fbf..e6756d9c60a7 100644 --- a/tools/testing/selftests/timers/inconsistency-check.c +++ b/tools/testing/selftests/timers/inconsistency-check.c @@ -72,7 +72,7 @@ char *clockstring(int clockid) return "CLOCK_BOOTTIME_ALARM"; case CLOCK_TAI: return "CLOCK_TAI"; - }; + } return "UNKNOWN_CLOCKID"; } -- 2.25.1

3 years, 8 months

1
0
0 0

[PATCH] kselftests: timers:Remove unneeded semicolon

by cgel.zte＠gmail.com

From: Zhang Mingyu <zhang.mingyu(a)zte.com.cn> Eliminate the following coccinelle check warning: tools/testing/selftests/timers/alarmtimer-suspend.c:82:2-3 Reported-by: Zeal Robot <zealci(a)zte.com.cn> Signed-off-by: Zhang Mingyu <zhang.mingyu(a)zte.com.cn> --- tools/testing/selftests/timers/alarmtimer-suspend.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/timers/alarmtimer-suspend.c b/tools/testing/selftests/timers/alarmtimer-suspend.c index 4da09dbf83ba..54da4b088f4c 100644 --- a/tools/testing/selftests/timers/alarmtimer-suspend.c +++ b/tools/testing/selftests/timers/alarmtimer-suspend.c @@ -79,7 +79,7 @@ char *clockstring(int clockid) return "CLOCK_BOOTTIME_ALARM"; case CLOCK_TAI: return "CLOCK_TAI"; - }; + } return "UNKNOWN_CLOCKID"; } -- 2.25.1

3 years, 8 months

1
0
0 0

[PATCH] selftests/seccomp: Unconditionally define seccomp_metadata

by Luke Nowakowski-Krijger

There are conflicts between glibc system headers sys/ptrace.h and linux/ptrace.h that can likely cause seccomp_metadata not be defined depending on what version versions are installed, leading to compile errors. A solution to make this test more resitant to these system header differences is to rely on defintions inside of the file by unconditionally defining seccomp_metadata and removing the linux/ptrace.h include where a defintion of seccomp_metadata exists for certain headers. Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger(a)canonical.com> --- tools/testing/selftests/seccomp/seccomp_bpf.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index d425688cf59c..67e2c3c001a0 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -26,7 +26,6 @@ #include <sys/ptrace.h> #include <sys/user.h> #include <linux/prctl.h> -#include <linux/ptrace.h> #include <linux/seccomp.h> #include <pthread.h> #include <semaphore.h> @@ -171,12 +170,12 @@ struct seccomp_data { #ifndef PTRACE_SECCOMP_GET_METADATA #define PTRACE_SECCOMP_GET_METADATA 0x420d +#endif struct seccomp_metadata { __u64 filter_off; /* Input: which filter */ __u64 flags; /* Output: filter's flags */ }; -#endif #ifndef SECCOMP_FILTER_FLAG_NEW_LISTENER #define SECCOMP_FILTER_FLAG_NEW_LISTENER (1UL << 3) -- 2.32.0

3 years, 8 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror