┌────────────┐ ┌───────────────────────────────────┐ ┌────────────────┐ │ │ │ │ │ │ │ │ │ PCI Endpoint │ │ PCI Host │ │ │ │ │ │ │ │ │◄──┤ 1.platform_msi_domain_alloc_irqs()│ │ │ │ │ │ │ │ │ │ MSI ├──►│ 2.write_msi_msg() ├──►├─BAR<n> │ │ Controller │ │ update doorbell register address│ │ │ │ │ │ for BAR │ │ │ │ │ │ │ │ 3. Write BAR<n>│ │ │◄──┼───────────────────────────────────┼───┤ │ │ │ │ │ │ │ │ ├──►│ 4.Irq Handle │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ └────────────┘ └───────────────────────────────────┘ └────────────────┘
This patches based on old https://lore.kernel.org/imx/20221124055036.1630573-1-Frank.Li@nxp.com/
Original patch only target to vntb driver. But actually it is common method.
This patches add new API to pci-epf-core, so any EP driver can use it.
Previous v2 discussion here. https://lore.kernel.org/imx/20230911220920.1817033-1-Frank.Li@nxp.com/
Changes in v14: Marc Zyngier raised concerns about adding DOMAIN_BUS_DEVICE_PCI_EP_MSI. As a result, the approach has been reverted to the v9 method. However, there are several improvements:
MSI now supports msi-map in addition to msi-parent. - The struct device: id is used as the endpoint function (EPF) device identity to map to the stream ID (sideband information). - The EPC device tree source (DTS) utilizes msi-map to provide such information. - The EPF device's of_node is set to the EPC controller’s node. This approach is commonly used for multi-function device (MFD) platform child devices, allowing them to inherit properties from the MFD device’s DTS, such as reset-cells and gpio-cells. This method is well-suited for the current case, as the EPF is inherently created/binded to the EPC and should inherit the EPC’s DTS node properties.
Additionally:
Since the basic IMX95 LUT support has already been merged into the mainline, a DTS and driver increment patch is added to complete the solution. The patch is rebased onto the latest linux-next tree and aligned with the new pcitest framework.
- Link to v13: https://lore.kernel.org/r/20241218-ep-msi-v13-0-646e2192dc24@nxp.com
Changes in v13: - Change to use DOMAIN_BUS_PCI_DEVICE_EP_MSI - Change request id as func | vfunc << 3 - Remove IRQ_DOMAIN_MSI_IMMUTABLE
Thomas Gleixner:
I hope capture all your points in review comments. If missed, let me know.
- Link to v12: https://lore.kernel.org/r/20241211-ep-msi-v12-0-33d4532fa520@nxp.com
Changes in v12: - Change to use IRQ_DOMAIN_MSI_IMMUTABLE and add help function irq_domain_msi_is_immuatble(). - split PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check to 3 patches - Link to v11: https://lore.kernel.org/r/20241209-ep-msi-v11-0-7434fa8397bd@nxp.com
Changes in v11: - Change to use MSI_FLAG_MSG_IMMUTABLE - Link to v10: https://lore.kernel.org/r/20241204-ep-msi-v10-0-87c378dbcd6d@nxp.com
Changes in v10:
Thomas Gleixner: There are big change in pci-ep-msi.c. I am sure if go on the corrent path. The key improvement is remove only 1 function devices's limitation.
I use new patch for imutable check, which relative additional feature compared to base enablement patch.
- Remove patch Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all() - Add new patch irqchip/gic-v3-its: Avoid overwriting msi_prepare callback if provided by msi_domain_info - Remove only support 1 endpoint function limiation. - Create one MSI domain for each endpoint function devices. - Use "msi-map" in pci ep controler node, instead of of msi-parent. first argument is (func_no << 8 | vfunc_no)
- Link to v9: https://lore.kernel.org/r/20241203-ep-msi-v9-0-a60dbc3f15dd@nxp.com
Changes in v9 - Add patch platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all() - Remove patch PCI: endpoint: Add pci_epc_get_fn() API for customizable filtering - Remove API pci_epf_align_inbound_addr_lo_hi - Move doorbell_alloc in to doorbell_enable function. - Link to v8: https://lore.kernel.org/r/20241116-ep-msi-v8-0-6f1f68ffd1bb@nxp.com
Changes in v8: - update helper function name to pci_epf_align_inbound_addr() - Link to v7: https://lore.kernel.org/r/20241114-ep-msi-v7-0-d4ac7aafbd2c@nxp.com
Changes in v7: - Add helper function pci_epf_align_addr(); - Link to v6: https://lore.kernel.org/r/20241112-ep-msi-v6-0-45f9722e3c2a@nxp.com
Changes in v6: - change doorbell_addr to doorbell_offset - use round_down() - add Niklas's test by tag - rebase to pci/endpoint - Link to v5: https://lore.kernel.org/r/20241108-ep-msi-v5-0-a14951c0d007@nxp.com
Changes in v5: - Move request_irq to epf test function driver for more flexiable user case - Add fixed size bar handler - Some minor improvememtn to see each patches's changelog. - Link to v4: https://lore.kernel.org/r/20241031-ep-msi-v4-0-717da2d99b28@nxp.com
Changes in v4: - Remove patch genirq/msi: Add cleanup guard define for msi_lock_descs()/msi_unlock_descs() - Use new method to avoid compatible problem. Add new command DOORBELL_ENABLE and DOORBELL_DISABLE. pcitest -B send DOORBELL_ENABLE first, EP test function driver try to remap one of BAR_N (except test register bar) to ITS MSI MMIO space. Old driver don't support new command, so failure return, not side effect. After test, DOORBELL_DISABLE command send out to recover original map, so pcitest bar test can pass as normal. - Other detail change see each patches's change log - Link to v3: https://lore.kernel.org/r/20241015-ep-msi-v3-0-cedc89a16c1a@nxp.com
Change from v2 to v3 - Fixed manivannan's comments - Move common part to pci-ep-msi.c and pci-ep-msi.h - rebase to 6.12-rc1 - use RevID to distingiush old version
mkdir /sys/kernel/config/pci_ep/functions/pci_epf_test/func1 echo 16 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/msi_interrupts echo 0x080c > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/deviceid echo 0x1957 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/vendorid echo 1 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/revid ^^^^^^ to enable platform msi support. ln -s /sys/kernel/config/pci_ep/functions/pci_epf_test/func1 /sys/kernel/config/pci_ep/controllers/4c380000.pcie-ep
- use new device ID, which identify support doorbell to avoid broken compatility.
Enable doorbell support only for PCI_DEVICE_ID_IMX8_DB, while other devices keep the same behavior as before.
EP side RC with old driver RC with new driver PCI_DEVICE_ID_IMX8_DB no probe doorbell enabled Other device ID doorbell disabled* doorbell disabled*
* Behavior remains unchanged.
Change from v1 to v2 - Add missed patch for endpont/pci-epf-test.c - Move alloc and free to epc driver from epf. - Provide general help function for EPC driver to alloc platform msi irq. - Fixed manivannan's comments.
Signed-off-by: Frank Li Frank.Li@nxp.com --- Frank Li (15): platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all() irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable() irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask PCI: endpoint: Set ID and of_node for function driver PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment PCI: endpoint: pci-epf-test: Add doorbell test support misc: pci_endpoint_test: Add doorbell test case selftests: pci_endpoint: Add doorbell test case pci: imx6: Add helper function imx_pcie_add_lut_by_rid() pci: imx6: Add LUT setting for MSI/IOMMU in Endpoint mode arm64: dts: imx95: Add msi-map for pci-ep device arm64: dts: imx95-19x19-evk: Add PCIe1 endpoint function overlay file
arch/arm64/boot/dts/freescale/Makefile | 3 + .../dts/freescale/imx95-19x19-evk-pcie1-ep.dtso | 21 ++++ arch/arm64/boot/dts/freescale/imx95.dtsi | 1 + drivers/base/platform-msi.c | 1 + drivers/irqchip/irq-gic-v3-its-msi-parent.c | 8 ++ drivers/irqchip/irq-gic-v3-its.c | 2 +- drivers/misc/pci_endpoint_test.c | 81 +++++++++++++ drivers/pci/controller/dwc/pci-imx6.c | 25 ++-- drivers/pci/endpoint/Makefile | 2 +- drivers/pci/endpoint/functions/pci-epf-test.c | 132 +++++++++++++++++++++ drivers/pci/endpoint/pci-ep-msi.c | 89 ++++++++++++++ drivers/pci/endpoint/pci-epf-core.c | 48 ++++++++ include/linux/irqdomain.h | 7 ++ include/linux/pci-ep-msi.h | 26 ++++ include/linux/pci-epf.h | 21 ++++ include/uapi/linux/pcitest.h | 1 + .../selftests/pci_endpoint/pci_endpoint_test.c | 25 ++++ 17 files changed, 483 insertions(+), 10 deletions(-) --- base-commit: 00f3246adeeacbda0bd0b303604e46eb59c32e6e change-id: 20241010-ep-msi-8b4cab33b1be
Best regards, --- Frank Li Frank.Li@nxp.com