Add a test to check each value of bond fail_over_mac option.
Also fix a minor garp_test print issue.
Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../drivers/net/bonding/bond_options.sh | 139 +++++++++++++++++- .../drivers/net/bonding/bond_topo_2d1c.sh | 3 + .../drivers/net/bonding/bond_topo_3d1c.sh | 2 + 3 files changed, 142 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh index 7bc148889ca7..e3f3cc803b56 100755 --- a/tools/testing/selftests/drivers/net/bonding/bond_options.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh @@ -7,6 +7,7 @@ ALL_TESTS=" prio arp_validate num_grat_arp + fail_over_mac "
lib_dir=$(dirname "$0") @@ -352,8 +353,8 @@ garp_test()
exp_num=$(echo "${param}" | cut -f6 -d ' ') active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") - slowwait_for_counter $((exp_num + 5)) $exp_num \ - tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}" + slowwait_for_counter $((exp_num + 5)) $exp_num tc_rule_handle_stats_get \ + "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}" &> /dev/null
# check result real_num=$(tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}") @@ -376,6 +377,140 @@ num_grat_arp() done }
+check_all_mac_same() +{ + RET=0 + # all slaves should have same mac address (with the first port's mac) + local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]') + local eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]') + local eth1_mac=$(ip -n "$s_ns" -j link show eth1 | jq -r '.[]["address"]') + local eth2_mac=$(ip -n "$s_ns" -j link show eth2 | jq -r '.[]["address"]') + if [ "$bond_mac" != "${mac[0]}" ] || [ "$eth0_mac" != "$bond_mac" ] || \ + [ "$eth1_mac" != "$bond_mac" ] || [ "$eth2_mac" != "$bond_mac" ]; then + RET=1 + fi +} + +check_bond_mac_same_with_first() +{ + RET=0 + # bond mac address should be same with the first added slave + local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]') + if [ "$bond_mac" != "${mac[0]}" ]; then + RET=1 + fi +} + +check_bond_mac_same_with_active() +{ + RET=0 + # bond mac address should be same with active slave + local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]') + local active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + local active_slave_mac=$(ip -n "$s_ns" -j link show "$active_slave" | jq -r '.[]["address"]') + if [ "$bond_mac" != "$active_slave_mac" ]; then + RET=1 + fi +} + +check_backup_slave_mac_not_change() +{ + RET=0 + # backup slave's mac address is not changed + if ip -n "$s_ns" -d -j link show type bond_slave | jq -e '.[] + | select(.linkinfo.info_slave_data.state=="BACKUP") + | select(.address != .linkinfo.info_slave_data.perm_hwaddr)' &> /dev/null; then + RET=1 + fi +} + +check_backup_slave_mac_inherit() +{ + local backup_mac + RET=0 + + # backup slaves should use mac[1] or mac[2] + local backup_macs=$(ip -n "$s_ns" -d -j link show type bond_slave | \ + jq -r '.[] | select(.linkinfo.info_slave_data.state=="BACKUP") | .address') + for backup_mac in $backup_macs; do + if [ "$backup_mac" != "${mac[1]}" ] && [ "$backup_mac" != "${mac[2]}" ]; then + RET=1 + fi + done +} + +check_first_slave_random_mac() +{ + RET=0 + # remove the first added slave and added it back + ip -n "$s_ns" link set eth0 nomaster + ip -n "$s_ns" link set eth0 master bond0 + + # the first slave should use random mac address + eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]') + [ "$eth0_mac" = "${mac[0]}" ] && RET=1 + log_test "bond fail_over_mac follow" "random first slave mac" + + # remove the first slave, the permanent MAC address should be restored back + ip -n "$s_ns" link set eth0 nomaster + eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]') + [ "$eth0_mac" != "${mac[0]}" ] && RET=1 +} + +do_active_backup_failover() +{ + local active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + ip -n ${s_ns} link set ${active_slave} down + slowwait 2 active_slave_changed $active_slave + ip -n ${s_ns} link set ${active_slave} up +} + +fail_over_mac() +{ + # Bring down the first interface on the switch to force the bond to + # select another active interface instead of the first one that joined. + ip -n "$g_ns" link set s0 down + + # fail_over_mac none + bond_reset "mode active-backup miimon 100 fail_over_mac 0" + check_all_mac_same + log_test "fail_over_mac 0" "all slaves have same mac" + do_active_backup_failover + check_all_mac_same + log_test "fail_over_mac 0" "failover: all slaves have same mac" + + # fail_over_mac active + bond_reset "mode active-backup miimon 100 fail_over_mac 1" + check_bond_mac_same_with_active + log_test "fail_over_mac 1" "bond mac is same with active slave mac" + check_backup_slave_mac_not_change + log_test "fail_over_mac 1" "backup slave mac is not changed" + do_active_backup_failover + check_bond_mac_same_with_active + log_test "fail_over_mac 1" "failover: bond mac is same with active slave mac" + check_backup_slave_mac_not_change + log_test "fail_over_mac 1" "failover: backup slave mac is not changed" + + # fail_over_mac follow + bond_reset "mode active-backup miimon 100 fail_over_mac 2" + check_bond_mac_same_with_first + log_test "fail_over_mac 2" "bond mac is same with first slave mac" + check_bond_mac_same_with_active + log_test "fail_over_mac 2" "bond mac is same with active slave mac" + check_backup_slave_mac_inherit + log_test "fail_over_mac 2" "backup slave mac inherit" + do_active_backup_failover + check_bond_mac_same_with_first + log_test "fail_over_mac 2" "failover: bond mac is same with first slave mac" + check_bond_mac_same_with_active + log_test "fail_over_mac 2" "failover: bond mac is same with active slave mac" + check_backup_slave_mac_inherit + log_test "fail_over_mac 2" "failover: backup slave mac inherit" + check_first_slave_random_mac + log_test "fail_over_mac 2" "first slave mac random" + +} + trap cleanup EXIT
setup_prepare diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh index 195ef83cfbf1..167aa4a4a12a 100644 --- a/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh @@ -39,6 +39,8 @@ g_ip4="192.0.2.254" s_ip6="2001:db8::1" c_ip6="2001:db8::10" g_ip6="2001:db8::254" +mac[0]="00:0a:0b:0c:0d:01" +mac[1]="00:0a:0b:0c:0d:02"
gateway_create() { @@ -62,6 +64,7 @@ server_create()
for i in $(seq 0 1); do ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns} + ip -n "${s_ns}" link set "eth${i}" addr "${mac[$i]}"
ip -n ${g_ns} link set s${i} up ip -n ${g_ns} link set s${i} master br0 diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh index 3a1333d9a85b..23a2932301cc 100644 --- a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh @@ -26,6 +26,7 @@ # +-------------------------------------+
source bond_topo_2d1c.sh +mac[2]="00:0a:0b:0c:0d:03"
setup_prepare() { @@ -36,6 +37,7 @@ setup_prepare() # Add the extra device as we use 3 down links for bond0 local i=2 ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns} + ip -n "${s_ns}" link set "eth${i}" addr "${mac[$i]}" ip -n ${g_ns} link set s${i} up ip -n ${g_ns} link set s${i} master br0 ip -n ${s_ns} link set eth${i} master bond0