Hi Vadim,
On 10/24/2024 7:06 PM, Vadim Fedorenko wrote:
On 24/10/2024 11:30, MD Danish Anwar wrote:
From: Murali Karicheri m-karicheri2@ti.com
This patch adds support for VLAN ctag based filtering at slave devices. The slave ethernet device may be capable of filtering ethernet packets based on VLAN ID. This requires that when the VLAN interface is created over an HSR/PRP interface, it passes the VID information to the associated slave ethernet devices so that it updates the hardware filters to filter ethernet frames based on VID. This patch adds the required functions to propagate the vid information to the slave devices.
Signed-off-by: Murali Karicheri m-karicheri2@ti.com Signed-off-by: MD Danish Anwar danishanwar@ti.com
net/hsr/hsr_device.c | 71 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 70 insertions(+), 1 deletion(-)
diff --git a/net/hsr/hsr_device.c b/net/hsr/hsr_device.c index 0ca47ebb01d3..ff586bdc2bde 100644 --- a/net/hsr/hsr_device.c +++ b/net/hsr/hsr_device.c @@ -515,6 +515,68 @@ static void hsr_change_rx_flags(struct net_device *dev, int change) } } +static int hsr_ndo_vlan_rx_add_vid(struct net_device *dev, + __be16 proto, u16 vid) +{ + struct hsr_port *port; + struct hsr_priv *hsr; + int ret = 0;
+ hsr = netdev_priv(dev);
+ hsr_for_each_port(hsr, port) { + if (port->type == HSR_PT_MASTER) + continue;
+ ret = vlan_vid_add(port->dev, proto, vid); + switch (port->type) { + case HSR_PT_SLAVE_A: + if (ret) { + netdev_err(dev, "add vid failed for Slave-A\n"); + return ret; + } + break;
+ case HSR_PT_SLAVE_B: + if (ret) { + /* clean up Slave-A */ + netdev_err(dev, "add vid failed for Slave-B\n"); + vlan_vid_del(port->dev, proto, vid); + return ret; + } + break; + default: + break; + } + }
+ return 0; +}
This function doesn't match with hsr_ndo_vlan_rx_kill_vid(). vlan_vid_add() can potentially be executed for port->type equals to HSR_PT_INTERLINK, but the result will be ignored. And the vlan_vid_del() will never happen in this case. Is it desired behavior? Maybe it's better to synchronize add/del code and refactor error path to avoid coping the code?
The kill_vid / add_vid is not similar because during add_vid, if vlan_vid_add() succeeds for one port but fails for other, we need to delete it for the earlier port. We can only continue if vlan_vid_add() succeeds for both ports. That's the reason the switch case handling of add_vid can not match the same for kill_vid. Since cleanup of port is needed, it's not possible to synchronize add/kill code
We only care about HSR_PT_SLAVE_A and HSR_PT_SLAVE_B here. So it's okay to ignore HSR_PT_INTERLINK. It's a desired behaviour here.
+static int hsr_ndo_vlan_rx_kill_vid(struct net_device *dev, + __be16 proto, u16 vid) +{ + struct hsr_port *port; + struct hsr_priv *hsr;
+ hsr = netdev_priv(dev);
+ hsr_for_each_port(hsr, port) { + if (port->type == HSR_PT_MASTER) + continue; + switch (port->type) { + case HSR_PT_SLAVE_A: + case HSR_PT_SLAVE_B: + vlan_vid_del(port->dev, proto, vid); + break; + default: + break; + } + }
+ return 0; +}
static const struct net_device_ops hsr_device_ops = { .ndo_change_mtu = hsr_dev_change_mtu, .ndo_open = hsr_dev_open, @@ -523,6 +585,8 @@ static const struct net_device_ops hsr_device_ops = { .ndo_change_rx_flags = hsr_change_rx_flags, .ndo_fix_features = hsr_fix_features, .ndo_set_rx_mode = hsr_set_rx_mode, + .ndo_vlan_rx_add_vid = hsr_ndo_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = hsr_ndo_vlan_rx_kill_vid, }; static const struct device_type hsr_type = { @@ -569,7 +633,8 @@ void hsr_dev_setup(struct net_device *dev) dev->hw_features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HIGHDMA | NETIF_F_GSO_MASK | NETIF_F_HW_CSUM | - NETIF_F_HW_VLAN_CTAG_TX; + NETIF_F_HW_VLAN_CTAG_TX | + NETIF_F_HW_VLAN_CTAG_FILTER; dev->features = dev->hw_features; } @@ -647,6 +712,10 @@ int hsr_dev_finalize(struct net_device *hsr_dev, struct net_device *slave[2], (slave[1]->features & NETIF_F_HW_HSR_FWD)) hsr->fwd_offloaded = true; + if ((slave[0]->features & NETIF_F_HW_VLAN_CTAG_FILTER) && + (slave[1]->features & NETIF_F_HW_VLAN_CTAG_FILTER)) + hsr_dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
res = register_netdevice(hsr_dev); if (res) goto err_unregister;