On Fri, Sep 06, 2024 at 06:45:53AM +0000, Mohan.Prasad@microchip.com wrote:
Hello Andrew,
Thank you for your review comments.
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
On Wed, Sep 04, 2024 at 03:45:46AM +0530, Mohan Prasad J wrote:
This series of patches are for testing the lan743x network driver. Testing comprises autonegotiation, speed, duplex and throughput checks. Tools such as ethtool, iperf3 are used in the testing process. Performance test is done for TCP streams at different speeds.
What is specific to lan743x? Why won't the autoneg test work for any interface which says it supports autoneg? Is duplex somehow special on the lan743x?
Where possible, please try to make these tests generic, usable on any NIC. Or clearly document why they cannot be generic.
As suggested, I will change the testcases to generic form and document them accordingly in the next version.
Great.
How much time do you have?
ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full
You can see that both the local device and the peer support auto-neg. You can see what link modes both the local and peer supports. The local device has 1000BaseT/Half where the peer does not, which is reasonably common. So you could use this as a basis for the test, ensurer 5 link modes do pass auto-neg, and one fails.
If you can, please try to avoid hard coding any link modes. There will be some data centre NICs with a lowest speed to 10GBaseX, for example. There are some automotive devices with 10BaseT-1L which does not support autp-neg etc. It would be nice if the test could be used on any interface and the test will decide itself what can be tested, or if it should skip everything?
And by the way, thanks for working on tests. We need more people like you contributing to them.
Andrew